diff --git a/.gitignore b/.gitignore index 51bd99d..cecb3b0 100644 --- a/.gitignore +++ b/.gitignore @@ -3,7 +3,7 @@ # subdirectories here. Add them in the ".gitignore" file # in that subdirectory instead. # -# NOTE! Please use 'git-ls-files -i --exclude-standard' +# NOTE! Please use 'git ls-files -i --exclude-standard' # command after changing this file, to see if there are # any tracked files which get ignored after the change. # @@ -25,6 +25,8 @@ *.elf *.bin *.gz +*.lzma +*.patch # # Top-level generic files @@ -62,6 +64,12 @@ series cscope.* ncscope.* +# gnu global files +GPATH +GRTAGS +GSYMS +GTAGS + *.orig *~ \#*# diff --git a/CREDITS b/CREDITS index 2520ba6..2b88fb3 100644 --- a/CREDITS +++ b/CREDITS @@ -1253,6 +1253,10 @@ S: 8124 Constitution Apt. 7 S: Sterling Heights, Michigan 48313 S: USA +N: Wolfgang Grandegger +E: wg@grandegger.com +D: Controller Area Network (device drivers) + N: William Greathouse E: wgreathouse@smva.com E: wgreathouse@myfavoritei.com diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 44f52a4..cbbd3e0 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -60,3 +60,62 @@ Description: Indicates whether the block layer should automatically generate checksums for write requests bound for devices that support receiving integrity metadata. + +What: /sys/block//alignment_offset +Date: April 2009 +Contact: Martin K. Petersen +Description: + Storage devices may report a physical block size that is + bigger than the logical block size (for instance a drive + with 4KB physical sectors exposing 512-byte logical + blocks to the operating system). This parameter + indicates how many bytes the beginning of the device is + offset from the disk's natural alignment. + +What: /sys/block///alignment_offset +Date: April 2009 +Contact: Martin K. Petersen +Description: + Storage devices may report a physical block size that is + bigger than the logical block size (for instance a drive + with 4KB physical sectors exposing 512-byte logical + blocks to the operating system). This parameter + indicates how many bytes the beginning of the partition + is offset from the disk's natural alignment. + +What: /sys/block//queue/logical_block_size +Date: May 2009 +Contact: Martin K. Petersen +Description: + This is the smallest unit the storage device can + address. It is typically 512 bytes. + +What: /sys/block//queue/physical_block_size +Date: May 2009 +Contact: Martin K. Petersen +Description: + This is the smallest unit the storage device can write + without resorting to read-modify-write operation. It is + usually the same as the logical block size but may be + bigger. One example is SATA drives with 4KB sectors + that expose a 512-byte logical block size to the + operating system. + +What: /sys/block//queue/minimum_io_size +Date: April 2009 +Contact: Martin K. Petersen +Description: + Storage devices may report a preferred minimum I/O size, + which is the smallest request the device can perform + without incurring a read-modify-write penalty. For disk + drives this is often the physical block size. For RAID + arrays it is often the stripe chunk size. + +What: /sys/block//queue/optimal_io_size +Date: April 2009 +Contact: Martin K. Petersen +Description: + Storage devices may report an optimal I/O size, which is + the device's preferred unit of receiving I/O. This is + rarely reported for disk drives. For RAID devices it is + usually the stripe width or the internal block size. diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss new file mode 100644 index 0000000..0a92a7c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss @@ -0,0 +1,33 @@ +Where: /sys/bus/pci/devices//ccissX/cXdY/model +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: Displays the SCSI INQUIRY page 0 model for logical drive + Y of controller X. + +Where: /sys/bus/pci/devices//ccissX/cXdY/rev +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: Displays the SCSI INQUIRY page 0 revision for logical + drive Y of controller X. + +Where: /sys/bus/pci/devices//ccissX/cXdY/unique_id +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: Displays the SCSI INQUIRY page 83 serial number for logical + drive Y of controller X. + +Where: /sys/bus/pci/devices//ccissX/cXdY/vendor +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: Displays the SCSI INQUIRY page 0 vendor for logical drive + Y of controller X. + +Where: /sys/bus/pci/devices//ccissX/cXdY/block:cciss!cXdY +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: A symbolic link to /sys/block/cciss!cXdY diff --git a/Documentation/ABI/testing/sysfs-devices-cache_disable b/Documentation/ABI/testing/sysfs-devices-cache_disable new file mode 100644 index 0000000..175bb4f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-cache_disable @@ -0,0 +1,18 @@ +What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X +Date: August 2008 +KernelVersion: 2.6.27 +Contact: mark.langsdorf@amd.com +Description: These files exist in every cpu's cache index directories. + There are currently 2 cache_disable_# files in each + directory. Reading from these files on a supported + processor will return that cache disable index value + for that processor and node. Writing to one of these + files will cause the specificed cache index to be disabled. + + Currently, only AMD Family 10h Processors support cache index + disable, and only for their L3 caches. See the BIOS and + Kernel Developer's Guide at + http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf + for formatting information and other details on the + cache index disable. +Users: joachim.deguara@amd.com diff --git a/Documentation/Changes b/Documentation/Changes index b95082b..6643924 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -29,7 +29,7 @@ hardware, for example, you probably needn't concern yourself with isdn4k-utils. o Gnu C 3.2 # gcc --version -o Gnu make 3.79.1 # make --version +o Gnu make 3.80 # make --version o binutils 2.12 # ld -v o util-linux 2.10o # fdformat --version o module-init-tools 0.9.10 # depmod -V @@ -48,6 +48,7 @@ o procps 3.2.0 # ps --version o oprofile 0.9 # oprofiled --version o udev 081 # udevinfo -V o grub 0.93 # grub --version +o mcelog 0.6 Kernel compilation ================== @@ -61,7 +62,7 @@ computer. Make ---- -You will need Gnu make 3.79.1 or later to build the kernel. +You will need Gnu make 3.80 or later to build the kernel. Binutils -------- @@ -276,6 +277,16 @@ before running exportfs or mountd. It is recommended that all NFS services be protected from the internet-at-large by a firewall where that is possible. +mcelog +------ + +In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility +as a regular cronjob similar to the x86-64 kernel to process and log +machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check +events are errors reported by the CPU. Processing them is strongly encouraged. +All x86-64 kernels since 2.6.4 require the mcelog utility to +process machine checks. + Getting updated software ======================== @@ -365,6 +376,10 @@ FUSE ---- o +mcelog +------ +o + Networking ********** diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 72968cd..8bb3723 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -698,8 +698,8 @@ very often is not. Abundant use of the inline keyword leads to a much bigger kernel, which in turn slows the system as a whole down, due to a bigger icache footprint for the CPU and simply because there is less memory available for the pagecache. Just think about it; a pagecache miss causes a -disk seek, which easily takes 5 miliseconds. There are a LOT of cpu cycles -that can go into these 5 miliseconds. +disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles +that can go into these 5 milliseconds. A reasonable rule of thumb is to not put inline at functions that have more than 3 lines of code in them. An exception to this rule are the cases where diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index d9aa43d..5aceb88 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -676,8 +676,8 @@ this directory the following files can currently be found: dma-api/all_errors This file contains a numeric value. If this value is not equal to zero the debugging code will print a warning for every error it finds - into the kernel log. Be carefull with this - option. It can easily flood your logs. + into the kernel log. Be careful with this + option, as it can easily flood your logs. dma-api/disabled This read-only file contains the character 'Y' if the debugging code is disabled. This can @@ -704,12 +704,24 @@ this directory the following files can currently be found: The current number of free dma_debug_entries in the allocator. + dma-api/driver-filter + You can write a name of a driver into this file + to limit the debug output to requests from that + particular driver. Write an empty string to + that file to disable the filter and see + all errors again. + If you have this code compiled into your kernel it will be enabled by default. If you want to boot without the bookkeeping anyway you can provide 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging. Notice that you can not enable it again at runtime. You have to reboot to do so. +If you want to see debug messages only for a special device driver you can +specify the dma_debug_driver= parameter. This will enable the +driver filter at boot time. The debug code will only print errors for that +driver afterwards. This filter can be disabled or changed later using debugfs. + When the code disables itself at runtime this is most likely because it ran out of dma_debug_entries. These entries are preallocated at boot. The number of preallocated entries is defined per architecture. If it is too low for you diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index b1eb661..9632444 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ mac80211.xml debugobjects.xml sh.xml regulator.xml \ - alsa-driver-api.xml writing-an-alsa-driver.xml + alsa-driver-api.xml writing-an-alsa-driver.xml \ + tracepoint.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl index fbeaffc..e369866 100644 --- a/Documentation/DocBook/mac80211.tmpl +++ b/Documentation/DocBook/mac80211.tmpl @@ -145,7 +145,6 @@ usage should require reading the full document. interface in STA mode at first! !Finclude/net/mac80211.h ieee80211_if_init_conf -!Finclude/net/mac80211.h ieee80211_if_conf diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl new file mode 100644 index 0000000..b0756d0 --- /dev/null +++ b/Documentation/DocBook/tracepoint.tmpl @@ -0,0 +1,89 @@ + + + + + + The Linux Kernel Tracepoint API + + + + Jason + Baron + +
+ jbaron@redhat.com +
+ + + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + Introduction + + Tracepoints are static probe points that are located in strategic points + throughout the kernel. 'Probes' register/unregister with tracepoints + via a callback mechanism. The 'probes' are strictly typed functions that + are passed a unique set of parameters defined by each tracepoint. + + + + From this simple callback mechanism, 'probes' can be used to profile, debug, + and understand kernel behavior. There are a number of tools that provide a + framework for using 'probes'. These tools include Systemtap, ftrace, and + LTTng. + + + + Tracepoints are defined in a number of header files via various macros. Thus, + the purpose of this document is to provide a clear accounting of the available + tracepoints. The intention is to understand not only what tracepoints are + available but also to understand where future tracepoints might be added. + + + + The API presented has functions of the form: + trace_tracepointname(function parameters). These are the + tracepoints callbacks that are found throughout the code. Registering and + unregistering probes with these callback sites is covered in the + Documentation/trace/* directory. + + + + + IRQ +!Iinclude/trace/events/irq.h + + + diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt index 6389dec..93cb28d 100644 --- a/Documentation/RCU/rculist_nulls.txt +++ b/Documentation/RCU/rculist_nulls.txt @@ -118,7 +118,7 @@ to another chain) checking the final 'nulls' value if the lookup met the end of chain. If final 'nulls' value is not the slot number, then we must restart the lookup at the beginning. If the object was moved to the same chain, -then the reader doesnt care : It might eventually +then the reader doesn't care : It might eventually scan the list again without harm. diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index 0688482..02cced1 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -192,23 +192,24 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy). The output of "cat rcu/rcudata" looks as follows: rcu: - 0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10 - 1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10 - 2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10 - 3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10 - 4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10 - 5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10 - 6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10 - 7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10 +rcu: + 0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10 + 1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10 + 2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10 + 3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10 + 4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10 + 5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10 + 6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10 + 7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10 rcu_bh: - 0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10 - 1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10 - 2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10 - 3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10 - 4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10 - 5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10 - 6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10 - 7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10 + 0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10 + 1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10 + 2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 + 3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10 + 4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 + 5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 + 6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 + 7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 The first section lists the rcu_data structures for rcu, the second for rcu_bh. Each section has one line per CPU, or eight for this 8-CPU system. @@ -253,12 +254,6 @@ o "pqc" indicates which grace period the last-observed quiescent o "qp" indicates that RCU still expects a quiescent state from this CPU. -o "rpfq" is the number of rcu_pending() calls on this CPU required - to induce this CPU to invoke force_quiescent_state(). - -o "rp" is low-order four hex digits of the count of how many times - rcu_pending() has been invoked on this CPU. - o "dt" is the current value of the dyntick counter that is incremented when entering or leaving dynticks idle state, either by the scheduler or by irq. The number after the "/" is the interrupt @@ -305,6 +300,9 @@ o "b" is the batch limit for this CPU. If more than this number of RCU callbacks is ready to invoke, then the remainder will be deferred. +There is also an rcu/rcudata.csv file with the same information in +comma-separated-variable spreadsheet format. + The output of "cat rcu/rcugp" looks as follows: @@ -411,3 +409,63 @@ o Each element of the form "1/1 0:127 ^0" represents one struct For example, the first entry at the lowest level shows "^0", indicating that it corresponds to bit zero in the first entry at the middle level. + + +The output of "cat rcu/rcu_pending" looks as follows: + +rcu: + 0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741 + 1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792 + 2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629 + 3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723 + 4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110 + 5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456 + 6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834 + 7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888 +rcu_bh: + 0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314 + 1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180 + 2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936 + 3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863 + 4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671 + 5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235 + 6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921 + 7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542 + +As always, this is once again split into "rcu" and "rcu_bh" portions. +The fields are as follows: + +o "np" is the number of times that __rcu_pending() has been invoked + for the corresponding flavor of RCU. + +o "qsp" is the number of times that the RCU was waiting for a + quiescent state from this CPU. + +o "cbr" is the number of times that this CPU had RCU callbacks + that had passed through a grace period, and were thus ready + to be invoked. + +o "cng" is the number of times that this CPU needed another + grace period while RCU was idle. + +o "gpc" is the number of times that an old grace period had + completed, but this CPU was not yet aware of it. + +o "gps" is the number of times that a new grace period had started, + but this CPU was not yet aware of it. + +o "nf" is the number of times that this CPU suspected that the + current grace period had run for too long, and thus needed to + be forced. + + Please note that "forcing" consists of sending resched IPIs + to holdout CPUs. If that CPU really still is in an old RCU + read-side critical section, then we really do have to wait for it. + The assumption behing "forcing" is that the CPU is not still in + an old RCU read-side critical section, but has not yet responded + for some other reason. + +o "nn" is the number of times that this CPU needed nothing. Alert + readers will note that the rcu "nn" number for a given CPU very + closely matches the rcu_bh "np" number for that same CPU. This + is due to short-circuit evaluation in rcu_pending(). diff --git a/Documentation/SM501.txt b/Documentation/SM501.txt index 6fc6560..561826f 100644 --- a/Documentation/SM501.txt +++ b/Documentation/SM501.txt @@ -5,7 +5,7 @@ Copyright 2006, 2007 Simtec Electronics The Silicon Motion SM501 multimedia companion chip is a multifunction device which may provide numerous interfaces including USB host controller USB gadget, -Asyncronous Serial ports, Audio functions and a dual display video interface. +asynchronous serial ports, audio functions, and a dual display video interface. The device may be connected by PCI or local bus with varying functions enabled. Core diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt index 629c92e..34614b4 100644 --- a/Documentation/Smack.txt +++ b/Documentation/Smack.txt @@ -184,8 +184,9 @@ length. Single character labels using special characters, that being anything other than a letter or digit, are reserved for use by the Smack development team. Smack labels are unstructured, case sensitive, and the only operation ever performed on them is comparison for equality. Smack labels cannot -contain unprintable characters or the "/" (slash) character. Smack labels -cannot begin with a '-', which is reserved for special options. +contain unprintable characters, the "/" (slash), the "\" (backslash), the "'" +(quote) and '"' (double-quote) characters. +Smack labels cannot begin with a '-', which is reserved for special options. There are some predefined labels: @@ -523,3 +524,18 @@ Smack supports some mount options: These mount options apply to all file system types. +Smack auditing + +If you want Smack auditing of security events, you need to set CONFIG_AUDIT +in your kernel configuration. +By default, all denied events will be audited. You can change this behavior by +writing a single character to the /smack/logging file : +0 : no logging +1 : log denied (default) +2 : log accepted +3 : log denied & accepted + +Events are logged as 'key=value' pairs, for each event you at least will get +the subjet, the object, the rights requested, the action, the kernel function +that triggered the event, plus other pairs depending on the type of event +audited. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index f309d3c..5c555a8 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -91,6 +91,10 @@ Be as specific as possible. The WORST descriptions possible include things like "update driver X", "bug fix for driver X", or "this patch includes updates for subsystem X. Please apply." +The maintainer will thank you if you write your patch description in a +form which can be easily pulled into Linux's source code management +system, git, as a "commit log". See #15, below. + If your description starts to get long, that's a sign that you probably need to split up your patch. See #3, next. @@ -183,8 +187,9 @@ Even if the maintainer did not respond in step #4, make sure to ALWAYS copy the maintainer when you change their code. For small patches you may want to CC the Trivial Patch Monkey -trivial@kernel.org managed by Jesper Juhl; which collects "trivial" -patches. Trivial patches must qualify for one of the following rules: +trivial@kernel.org which collects "trivial" patches. Have a look +into the MAINTAINERS file for its current manager. +Trivial patches must qualify for one of the following rules: Spelling fixes in documentation Spelling fixes which could break grep(1) Warning fixes (cluttering with useless warnings is bad) @@ -196,7 +201,6 @@ patches. Trivial patches must qualify for one of the following rules: since people copy, as long as it's trivial) Any fix by the author/maintainer of the file (ie. patch monkey in re-transmission mode) -URL: @@ -405,7 +409,14 @@ person it names. This tag documents that potentially interested parties have been included in the discussion -14) Using Tested-by: and Reviewed-by: +14) Using Reported-by:, Tested-by: and Reviewed-by: + +If this patch fixes a problem reported by somebody else, consider adding a +Reported-by: tag to credit the reporter for their contribution. Please +note that this tag should not be added without the reporter's permission, +especially if the problem was not reported in a public forum. That said, +if we diligently credit our bug reporters, they will, hopefully, be +inspired to help us again in the future. A Tested-by: tag indicates that the patch has been successfully tested (in some environment) by the person named. This tag informs maintainers that @@ -444,7 +455,7 @@ offer a Reviewed-by tag for a patch. This tag serves to give credit to reviewers and to inform maintainers of the degree of review which has been done on the patch. Reviewed-by: tags, when supplied by reviewers known to understand the subject area and to perform thorough reviews, will normally -increase the liklihood of your patch getting into the kernel. +increase the likelihood of your patch getting into the kernel. 15) The canonical patch format @@ -485,12 +496,33 @@ phrase" should not be a filename. Do not use the same "summary phrase" for every patch in a whole patch series (where a "patch series" is an ordered sequence of multiple, related patches). -Bear in mind that the "summary phrase" of your email becomes -a globally-unique identifier for that patch. It propagates -all the way into the git changelog. The "summary phrase" may -later be used in developer discussions which refer to the patch. -People will want to google for the "summary phrase" to read -discussion regarding that patch. +Bear in mind that the "summary phrase" of your email becomes a +globally-unique identifier for that patch. It propagates all the way +into the git changelog. The "summary phrase" may later be used in +developer discussions which refer to the patch. People will want to +google for the "summary phrase" to read discussion regarding that +patch. It will also be the only thing that people may quickly see +when, two or three months later, they are going through perhaps +thousands of patches using tools such as "gitk" or "git log +--oneline". + +For these reasons, the "summary" must be no more than 70-75 +characters, and it must describe both what the patch changes, as well +as why the patch might be necessary. It is challenging to be both +succinct and descriptive, but that is what a well-written summary +should do. + +The "summary phrase" may be prefixed by tags enclosed in square +brackets: "Subject: [PATCH tag] ". The tags are not +considered part of the summary phrase, but describe how the patch +should be treated. Common tags might include a version descriptor if +the multiple versions of the patch have been sent out in response to +comments (i.e., "v1, v2, v3"), or "RFC" to indicate a request for +comments. If there are four patches in a patch series the individual +patches may be numbered like this: 1/4, 2/4, 3/4, 4/4. This assures +that developers understand the order in which the patches should be +applied and that they have reviewed or applied all of the patches in +the patch series. A couple of example Subjects: @@ -510,19 +542,31 @@ the patch author in the changelog. The explanation body will be committed to the permanent source changelog, so should make sense to a competent reader who has long since forgotten the immediate details of the discussion that might -have led to this patch. +have led to this patch. Including symptoms of the failure which the +patch addresses (kernel log messages, oops messages, etc.) is +especially useful for people who might be searching the commit logs +looking for the applicable patch. If a patch fixes a compile failure, +it may not be necessary to include _all_ of the compile failures; just +enough that it is likely that someone searching for the patch can find +it. As in the "summary phrase", it is important to be both succinct as +well as descriptive. The "---" marker line serves the essential purpose of marking for patch handling tools where the changelog message ends. One good use for the additional comments after the "---" marker is for -a diffstat, to show what files have changed, and the number of inserted -and deleted lines per file. A diffstat is especially useful on bigger -patches. Other comments relevant only to the moment or the maintainer, -not suitable for the permanent changelog, should also go here. -Use diffstat options "-p 1 -w 70" so that filenames are listed from the -top of the kernel source tree and don't use too much horizontal space -(easily fit in 80 columns, maybe with some indentation). +a diffstat, to show what files have changed, and the number of +inserted and deleted lines per file. A diffstat is especially useful +on bigger patches. Other comments relevant only to the moment or the +maintainer, not suitable for the permanent changelog, should also go +here. A good example of such comments might be "patch changelogs" +which describe what has changed between the v1 and v2 version of the +patch. + +If you are going to include a diffstat after the "---" marker, please +use diffstat options "-p 1 -w 70" so that filenames are listed from +the top of the kernel source tree and don't use too much horizontal +space (easily fit in 80 columns, maybe with some indentation). See more details on the proper patch format in the following references. diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt index ea7ccfc..948c871 100644 --- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -51,7 +51,7 @@ PIN Numbers ----------- Each pin has an unique number associated with it in regs-gpio.h, - eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell + eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell the GPIO functions which pin is to be used. @@ -65,11 +65,11 @@ Configuring a pin Eg: - s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0); - s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); + s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0); + s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); - which would turn GPA0 into the lowest Address line A0, and set - GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line. + which would turn GPA(0) into the lowest Address line A0, and set + GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line. Reading the current configuration diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 6fab97e..8d2158a 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion +Note: Please refer to Documentation/DMA-mapping.txt for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI. diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt index 7257676..2d82c80 100644 --- a/Documentation/block/deadline-iosched.txt +++ b/Documentation/block/deadline-iosched.txt @@ -58,7 +58,7 @@ same criteria as reads. front_merges (bool) ------------ -Sometimes it happens that a request enters the io scheduler that is contigious +Sometimes it happens that a request enters the io scheduler that is contiguous with a request that is already on the queue. Either it fits in the back of that request, or it fits at the front. That is called either a back merge candidate or a front merge candidate. Due to the way files are typically laid out, diff --git a/Documentation/braille-console.txt b/Documentation/braille-console.txt index 000b0fb..d0d042c 100644 --- a/Documentation/braille-console.txt +++ b/Documentation/braille-console.txt @@ -27,7 +27,7 @@ parameter. For simplicity, only one braille console can be enabled, other uses of console=brl,... will be discarded. Also note that it does not interfere with -the console selection mecanism described in serial-console.txt +the console selection mechanism described in serial-console.txt For now, only the VisioBraille device is supported. diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt index c11b931..1517498 100644 --- a/Documentation/dell_rbu.txt +++ b/Documentation/dell_rbu.txt @@ -76,9 +76,9 @@ Do the steps below to download the BIOS image. The /sys/class/firmware/dell_rbu/ entries will remain till the following is done. -echo -1 > /sys/class/firmware/dell_rbu/loading. +echo -1 > /sys/class/firmware/dell_rbu/loading Until this step is completed the driver cannot be unloaded. -Also echoing either mono ,packet or init in to image_type will free up the +Also echoing either mono, packet or init in to image_type will free up the memory allocated by the driver. If a user by accident executes steps 1 and 3 above without executing step 2; diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting index dd48132..f622c1e 100644 --- a/Documentation/development-process/5.Posting +++ b/Documentation/development-process/5.Posting @@ -119,7 +119,7 @@ which takes quite a bit of time and thought after the "real work" has been done. When done properly, though, it is time well spent. -5.4: PATCH FORMATTING +5.4: PATCH FORMATTING AND CHANGELOGS So now you have a perfect series of patches for posting, but the work is not done quite yet. Each patch needs to be formatted into a message which @@ -146,8 +146,33 @@ that end, each patch will be composed of the following: - One or more tag lines, with, at a minimum, one Signed-off-by: line from the author of the patch. Tags will be described in more detail below. -The above three items should, normally, be the text used when committing -the change to a revision control system. They are followed by: +The items above, together, form the changelog for the patch. Writing good +changelogs is a crucial but often-neglected art; it's worth spending +another moment discussing this issue. When writing a changelog, you should +bear in mind that a number of different people will be reading your words. +These include subsystem maintainers and reviewers who need to decide +whether the patch should be included, distributors and other maintainers +trying to decide whether a patch should be backported to other kernels, bug +hunters wondering whether the patch is responsible for a problem they are +chasing, users who want to know how the kernel has changed, and more. A +good changelog conveys the needed information to all of these people in the +most direct and concise way possible. + +To that end, the summary line should describe the effects of and motivation +for the change as well as possible given the one-line constraint. The +detailed description can then amplify on those topics and provide any +needed additional information. If the patch fixes a bug, cite the commit +which introduced the bug if possible. If a problem is associated with +specific log or compiler output, include that output to help others +searching for a solution to the same problem. If the change is meant to +support other changes coming in later patch, say so. If internal APIs are +changed, detail those changes and how other developers should respond. In +general, the more you can put yourself into the shoes of everybody who will +be reading your changelog, the better that changelog (and the kernel as a +whole) will be. + +Needless to say, the changelog should be the text used when committing the +change to a revision control system. It will be followed by: - The patch itself, in the unified ("-u") patch format. Using the "-p" option to diff will associate function names with changes, making the diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 387b8a7..d79aead 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -188,7 +188,7 @@ For example, you can do something like the following. void my_midlayer_destroy_something() { - devres_release_group(dev, my_midlayer_create_soemthing); + devres_release_group(dev, my_midlayer_create_something); } diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 8eda3fb..06f8f46 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -23,8 +23,8 @@ first time, it was renamed to 'EDAC'. The bluesmoke project at sourceforge.net is now utilized as a 'staging area' for EDAC development, before it is sent upstream to kernel.org -At the bluesmoke/EDAC project site, is a series of quilt patches against -recent kernels, stored in a SVN respository. For easier downloading, there +At the bluesmoke/EDAC project site is a series of quilt patches against +recent kernels, stored in a SVN repository. For easier downloading, there is also a tarball snapshot available. ============================================================================ @@ -73,9 +73,9 @@ the vendor should tie the parity status bits to 0 if they do not intend to generate parity. Some vendors do not do this, and thus the parity bit can "float" giving false positives. -In the kernel there is a pci device attribute located in sysfs that is +In the kernel there is a PCI device attribute located in sysfs that is checked by the EDAC PCI scanning code. If that attribute is set, -PCI parity/error scannining is skipped for that device. The attribute +PCI parity/error scanning is skipped for that device. The attribute is: broken_parity_status diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt index c87bfe5..b994c3b 100644 --- a/Documentation/fb/sh7760fb.txt +++ b/Documentation/fb/sh7760fb.txt @@ -1,7 +1,7 @@ SH7760/SH7763 integrated LCDC Framebuffer driver ================================================ -0. Overwiew +0. Overview ----------- The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which supports (in theory) resolutions ranging from 1x1 to 1024x1024, diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index de491a3..7129846 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -437,3 +437,20 @@ Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate driver but this caused driver conflicts. Who: Jean Delvare Krzysztof Helt + +--------------------------- + +What: CONFIG_RFKILL_INPUT +When: 2.6.33 +Why: Should be implemented in userspace, policy daemon. +Who: Johannes Berg + +---------------------------- + +What: CONFIG_X86_OLD_MCE +When: 2.6.32 +Why: Remove the old legacy 32bit machine check code. This has been + superseded by the newer machine check code from the 64bit port, + but the old version has been kept around for easier testing. Note this + doesn't impact the old P5 and WinChip machine check handlers. +Who: Andi Kleen diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt index c634174..8f78ded 100644 --- a/Documentation/filesystems/autofs4-mount-control.txt +++ b/Documentation/filesystems/autofs4-mount-control.txt @@ -369,7 +369,7 @@ The call requires an initialized struct autofs_dev_ioctl. There are two possible variations. Both use the path field set to the path of the mount point to check and the size field adjusted appropriately. One uses the ioctlfd field to identify a specific mount point to check while the other -variation uses the path and optionaly arg1 set to an autofs mount type. +variation uses the path and optionally arg1 set to an autofs mount type. The call returns 1 if this is a mount point and sets arg1 to the device number of the mount and field arg2 to the relevant super block magic number (described below) or 0 if it isn't a mountpoint. In both cases diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt index 4db125b..2666b1e 100644 --- a/Documentation/filesystems/caching/netfs-api.txt +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -184,7 +184,7 @@ This has the following fields: have index children. If this function is not supplied or if it returns NULL then the first - cache in the parent's list will be chosed, or failing that, the first + cache in the parent's list will be chosen, or failing that, the first cache in the master list. (4) A function to retrieve an object's key from the netfs [mandatory]. diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt new file mode 100644 index 0000000..ed52af6 --- /dev/null +++ b/Documentation/filesystems/debugfs.txt @@ -0,0 +1,158 @@ +Copyright 2009 Jonathan Corbet + +Debugfs exists as a simple way for kernel developers to make information +available to user space. Unlike /proc, which is only meant for information +about a process, or sysfs, which has strict one-value-per-file rules, +debugfs has no rules at all. Developers can put any information they want +there. The debugfs filesystem is also intended to not serve as a stable +ABI to user space; in theory, there are no stability constraints placed on +files exported there. The real world is not always so simple, though [1]; +even debugfs interfaces are best designed with the idea that they will need +to be maintained forever. + +Debugfs is typically mounted with a command like: + + mount -t debugfs none /sys/kernel/debug + +(Or an equivalent /etc/fstab line). + +Note that the debugfs API is exported GPL-only to modules. + +Code using debugfs should include . Then, the first order +of business will be to create at least one directory to hold a set of +debugfs files: + + struct dentry *debugfs_create_dir(const char *name, struct dentry *parent); + +This call, if successful, will make a directory called name underneath the +indicated parent directory. If parent is NULL, the directory will be +created in the debugfs root. On success, the return value is a struct +dentry pointer which can be used to create files in the directory (and to +clean it up at the end). A NULL return value indicates that something went +wrong. If ERR_PTR(-ENODEV) is returned, that is an indication that the +kernel has been built without debugfs support and none of the functions +described below will work. + +The most general way to create a file within a debugfs directory is with: + + struct dentry *debugfs_create_file(const char *name, mode_t mode, + struct dentry *parent, void *data, + const struct file_operations *fops); + +Here, name is the name of the file to create, mode describes the access +permissions the file should have, parent indicates the directory which +should hold the file, data will be stored in the i_private field of the +resulting inode structure, and fops is a set of file operations which +implement the file's behavior. At a minimum, the read() and/or write() +operations should be provided; others can be included as needed. Again, +the return value will be a dentry pointer to the created file, NULL for +error, or ERR_PTR(-ENODEV) if debugfs support is missing. + +In a number of cases, the creation of a set of file operations is not +actually necessary; the debugfs code provides a number of helper functions +for simple situations. Files containing a single integer value can be +created with any of: + + struct dentry *debugfs_create_u8(const char *name, mode_t mode, + struct dentry *parent, u8 *value); + struct dentry *debugfs_create_u16(const char *name, mode_t mode, + struct dentry *parent, u16 *value); + struct dentry *debugfs_create_u32(const char *name, mode_t mode, + struct dentry *parent, u32 *value); + struct dentry *debugfs_create_u64(const char *name, mode_t mode, + struct dentry *parent, u64 *value); + +These files support both reading and writing the given value; if a specific +file should not be written to, simply set the mode bits accordingly. The +values in these files are in decimal; if hexadecimal is more appropriate, +the following functions can be used instead: + + struct dentry *debugfs_create_x8(const char *name, mode_t mode, + struct dentry *parent, u8 *value); + struct dentry *debugfs_create_x16(const char *name, mode_t mode, + struct dentry *parent, u16 *value); + struct dentry *debugfs_create_x32(const char *name, mode_t mode, + struct dentry *parent, u32 *value); + +Note that there is no debugfs_create_x64(). + +These functions are useful as long as the developer knows the size of the +value to be exported. Some types can have different widths on different +architectures, though, complicating the situation somewhat. There is a +function meant to help out in one special case: + + struct dentry *debugfs_create_size_t(const char *name, mode_t mode, + struct dentry *parent, + size_t *value); + +As might be expected, this function will create a debugfs file to represent +a variable of type size_t. + +Boolean values can be placed in debugfs with: + + struct dentry *debugfs_create_bool(const char *name, mode_t mode, + struct dentry *parent, u32 *value); + +A read on the resulting file will yield either Y (for non-zero values) or +N, followed by a newline. If written to, it will accept either upper- or +lower-case values, or 1 or 0. Any other input will be silently ignored. + +Finally, a block of arbitrary binary data can be exported with: + + struct debugfs_blob_wrapper { + void *data; + unsigned long size; + }; + + struct dentry *debugfs_create_blob(const char *name, mode_t mode, + struct dentry *parent, + struct debugfs_blob_wrapper *blob); + +A read of this file will return the data pointed to by the +debugfs_blob_wrapper structure. Some drivers use "blobs" as a simple way +to return several lines of (static) formatted text output. This function +can be used to export binary information, but there does not appear to be +any code which does so in the mainline. Note that all files created with +debugfs_create_blob() are read-only. + +There are a couple of other directory-oriented helper functions: + + struct dentry *debugfs_rename(struct dentry *old_dir, + struct dentry *old_dentry, + struct dentry *new_dir, + const char *new_name); + + struct dentry *debugfs_create_symlink(const char *name, + struct dentry *parent, + const char *target); + +A call to debugfs_rename() will give a new name to an existing debugfs +file, possibly in a different directory. The new_name must not exist prior +to the call; the return value is old_dentry with updated information. +Symbolic links can be created with debugfs_create_symlink(). + +There is one important thing that all debugfs users must take into account: +there is no automatic cleanup of any directories created in debugfs. If a +module is unloaded without explicitly removing debugfs entries, the result +will be a lot of stale pointers and no end of highly antisocial behavior. +So all debugfs users - at least those which can be built as modules - must +be prepared to remove all files and directories they create there. A file +can be removed with: + + void debugfs_remove(struct dentry *dentry); + +The dentry value can be NULL, in which case nothing will be removed. + +Once upon a time, debugfs users were required to remember the dentry +pointer for every debugfs file they created so that all files could be +cleaned up. We live in more civilized times now, though, and debugfs users +can call: + + void debugfs_remove_recursive(struct dentry *dentry); + +If this function is passed a pointer for the dentry corresponding to the +top-level directory, the entire hierarchy below that directory will be +removed. + +Notes: + [1] http://lwn.net/Articles/309298/ diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 97882df..608fdba 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -294,7 +294,7 @@ max_batch_time=usec Maximum amount of time ext4 should wait for amount of time (on average) that it takes to finish committing a transaction. Call this time the "commit time". If the time that the - transactoin has been running is less than the + transaction has been running is less than the commit time, ext4 will try sleeping for the commit time to see if other operations will join the transaction. The commit time is capped by @@ -328,7 +328,7 @@ noauto_da_alloc replacing existing files via patterns such as journal commit, in the default data=ordered mode, the data blocks of the new file are forced to disk before the rename() operation is - commited. This provides roughly the same level + committed. This provides roughly the same level of guarantees as ext3, and avoids the "zero-length" problem that can happen when a system crashes before the delayed allocation @@ -358,7 +358,7 @@ written to the journal first, and then to its final location. In the event of a crash, the journal can be replayed, bringing both data and metadata into a consistent state. This mode is the slowest except when data needs to be read from and written to disk at the same time where it -outperforms all others modes. Curently ext4 does not have delayed +outperforms all others modes. Currently ext4 does not have delayed allocation support if this data journalling mode is selected. References diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt index 1e3defc..606233c 100644 --- a/Documentation/filesystems/fiemap.txt +++ b/Documentation/filesystems/fiemap.txt @@ -204,7 +204,7 @@ fiemap_check_flags() helper: int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags); -The struct fieinfo should be passed in as recieved from ioctl_fiemap(). The +The struct fieinfo should be passed in as received from ioctl_fiemap(). The set of fiemap flags which the fs understands should be passed via fs_flags. If fiemap_check_flags finds invalid user flags, it will place the bad values in fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from diff --git a/Documentation/filesystems/gfs2-glocks.txt b/Documentation/filesystems/gfs2-glocks.txt index 4dae9a3..0494f78 100644 --- a/Documentation/filesystems/gfs2-glocks.txt +++ b/Documentation/filesystems/gfs2-glocks.txt @@ -60,7 +60,7 @@ go_lock | Called for the first local holder of a lock go_unlock | Called on the final local unlock of a lock go_dump | Called to print content of object for debugfs file, or on | error to dump glock to the log. -go_type; | The type of the glock, LM_TYPE_..... +go_type | The type of the glock, LM_TYPE_..... go_min_hold_time | The minimum hold time The minimum hold time for each lock is the time after a remote lock diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.txt index 593004b..5e3ab8f 100644 --- a/Documentation/filesystems/gfs2.txt +++ b/Documentation/filesystems/gfs2.txt @@ -11,18 +11,15 @@ their I/O so file system consistency is maintained. One of the nifty features of GFS is perfect consistency -- changes made to the file system on one machine show up immediately on all other machines in the cluster. -GFS uses interchangable inter-node locking mechanisms. Different lock -modules can plug into GFS and each file system selects the appropriate -lock module at mount time. Lock modules include: +GFS uses interchangable inter-node locking mechanisms, the currently +supported mechanisms are: lock_nolock -- allows gfs to be used as a local file system lock_dlm -- uses a distributed lock manager (dlm) for inter-node locking The dlm is found at linux/fs/dlm/ -In addition to interfacing with an external locking manager, a gfs lock -module is responsible for interacting with external cluster management -systems. Lock_dlm depends on user space cluster management systems found +Lock_dlm depends on user space cluster management systems found at the URL above. To use gfs as a local file system, no external clustering systems are @@ -31,13 +28,19 @@ needed, simply: $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device $ mount -t gfs2 /dev/block_device /dir -GFS2 is not on-disk compatible with previous versions of GFS. +If you are using Fedora, you need to install the gfs2-utils package +and, for lock_dlm, you will also need to install the cman package +and write a cluster.conf as per the documentation. + +GFS2 is not on-disk compatible with previous versions of GFS, but it +is pretty close. The following man pages can be found at the URL above: - gfs2_fsck to repair a filesystem + fsck.gfs2 to repair a filesystem gfs2_grow to expand a filesystem online gfs2_jadd to add journals to a filesystem online gfs2_tool to manipulate, examine and tune a filesystem gfs2_quota to examine and change quota values in a filesystem + gfs2_convert to convert a gfs filesystem to gfs2 in-place mount.gfs2 to help mount(8) mount a filesystem mkfs.gfs2 to make a filesystem diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt index 85eaead..e386f7e 100644 --- a/Documentation/filesystems/nfs-rdma.txt +++ b/Documentation/filesystems/nfs-rdma.txt @@ -100,7 +100,7 @@ Installation $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs In this location, mount.nfs will be invoked automatically for NFS mounts - by the system mount commmand. + by the system mount command. NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed on the NFS client machine. You do not need this specific version of diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt index 55c4300..01539f4 100644 --- a/Documentation/filesystems/nilfs2.txt +++ b/Documentation/filesystems/nilfs2.txt @@ -39,9 +39,8 @@ Features which NILFS2 does not support yet: - extended attributes - POSIX ACLs - quotas - - writable snapshots - - remote backup (CDP) - - data integrity + - fsck + - resize - defragmentation Mount options diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index ce84cfc..cd8717a 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -366,7 +366,7 @@ just those considered 'most important'. The new vectors are: RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are sent from one CPU to another per the needs of the OS. Typically, their statistics are used by kernel developers and interested users to - determine the occurance of interrupt of the given type. + determine the occurrence of interrupts of the given type. The above IRQ vectors are displayed only when relevent. For example, the threshold vector does not exist on x86_64 platforms. Others are @@ -551,7 +551,7 @@ Committed_AS: The amount of memory presently allocated on the system. memory once that memory has been successfully allocated. VmallocTotal: total size of vmalloc memory area VmallocUsed: amount of vmalloc area which is used -VmallocChunk: largest contigious block of vmalloc area which is free +VmallocChunk: largest contiguous block of vmalloc area which is free .............................................................................. diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 26e4b8b..85354b3 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -72,7 +72,7 @@ The 'rom' file is special in that it provides read-only access to the device's ROM file, if available. It's disabled by default, however, so applications should write the string "1" to the file to enable it before attempting a read call, and disable it following the access by writing "0" to the file. Note -that the device must be enabled for a rom read to return data succesfully. +that the device must be enabled for a rom read to return data successfully. In the event a driver is not bound to the device, it can be enabled using the 'enable' file, documented above. diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index 3a5ddc9..5147be5 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -124,10 +124,10 @@ sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as flush -- If set, the filesystem will try to flush to disk more early than normal. Not set by default. -rodir -- FAT has the ATTR_RO (read-only) attribute. But on Windows, - the ATTR_RO of the directory will be just ignored actually, - and is used by only applications as flag. E.g. it's setted - for the customized folder. +rodir -- FAT has the ATTR_RO (read-only) attribute. On Windows, + the ATTR_RO of the directory will just be ignored, + and is used only by applications as a flag (e.g. it's set + for the customized folder). If you want to use ATTR_RO as read-only flag even for the directory, set this option. diff --git a/Documentation/futex-requeue-pi.txt b/Documentation/futex-requeue-pi.txt new file mode 100644 index 0000000..9dc1ff4 --- /dev/null +++ b/Documentation/futex-requeue-pi.txt @@ -0,0 +1,131 @@ +Futex Requeue PI +---------------- + +Requeueing of tasks from a non-PI futex to a PI futex requires +special handling in order to ensure the underlying rt_mutex is never +left without an owner if it has waiters; doing so would break the PI +boosting logic [see rt-mutex-desgin.txt] For the purposes of +brevity, this action will be referred to as "requeue_pi" throughout +this document. Priority inheritance is abbreviated throughout as +"PI". + +Motivation +---------- + +Without requeue_pi, the glibc implementation of +pthread_cond_broadcast() must resort to waking all the tasks waiting +on a pthread_condvar and letting them try to sort out which task +gets to run first in classic thundering-herd formation. An ideal +implementation would wake the highest-priority waiter, and leave the +rest to the natural wakeup inherent in unlocking the mutex +associated with the condvar. + +Consider the simplified glibc calls: + +/* caller must lock mutex */ +pthread_cond_wait(cond, mutex) +{ + lock(cond->__data.__lock); + unlock(mutex); + do { + unlock(cond->__data.__lock); + futex_wait(cond->__data.__futex); + lock(cond->__data.__lock); + } while(...) + unlock(cond->__data.__lock); + lock(mutex); +} + +pthread_cond_broadcast(cond) +{ + lock(cond->__data.__lock); + unlock(cond->__data.__lock); + futex_requeue(cond->data.__futex, cond->mutex); +} + +Once pthread_cond_broadcast() requeues the tasks, the cond->mutex +has waiters. Note that pthread_cond_wait() attempts to lock the +mutex only after it has returned to user space. This will leave the +underlying rt_mutex with waiters, and no owner, breaking the +previously mentioned PI-boosting algorithms. + +In order to support PI-aware pthread_condvar's, the kernel needs to +be able to requeue tasks to PI futexes. This support implies that +upon a successful futex_wait system call, the caller would return to +user space already holding the PI futex. The glibc implementation +would be modified as follows: + + +/* caller must lock mutex */ +pthread_cond_wait_pi(cond, mutex) +{ + lock(cond->__data.__lock); + unlock(mutex); + do { + unlock(cond->__data.__lock); + futex_wait_requeue_pi(cond->__data.__futex); + lock(cond->__data.__lock); + } while(...) + unlock(cond->__data.__lock); + /* the kernel acquired the the mutex for us */ +} + +pthread_cond_broadcast_pi(cond) +{ + lock(cond->__data.__lock); + unlock(cond->__data.__lock); + futex_requeue_pi(cond->data.__futex, cond->mutex); +} + +The actual glibc implementation will likely test for PI and make the +necessary changes inside the existing calls rather than creating new +calls for the PI cases. Similar changes are needed for +pthread_cond_timedwait() and pthread_cond_signal(). + +Implementation +-------------- + +In order to ensure the rt_mutex has an owner if it has waiters, it +is necessary for both the requeue code, as well as the waiting code, +to be able to acquire the rt_mutex before returning to user space. +The requeue code cannot simply wake the waiter and leave it to +acquire the rt_mutex as it would open a race window between the +requeue call returning to user space and the waiter waking and +starting to run. This is especially true in the uncontended case. + +The solution involves two new rt_mutex helper routines, +rt_mutex_start_proxy_lock() and rt_mutex_finish_proxy_lock(), which +allow the requeue code to acquire an uncontended rt_mutex on behalf +of the waiter and to enqueue the waiter on a contended rt_mutex. +Two new system calls provide the kernel<->user interface to +requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE_CMP_PI. + +FUTEX_WAIT_REQUEUE_PI is called by the waiter (pthread_cond_wait() +and pthread_cond_timedwait()) to block on the initial futex and wait +to be requeued to a PI-aware futex. The implementation is the +result of a high-speed collision between futex_wait() and +futex_lock_pi(), with some extra logic to check for the additional +wake-up scenarios. + +FUTEX_REQUEUE_CMP_PI is called by the waker +(pthread_cond_broadcast() and pthread_cond_signal()) to requeue and +possibly wake the waiting tasks. Internally, this system call is +still handled by futex_requeue (by passing requeue_pi=1). Before +requeueing, futex_requeue() attempts to acquire the requeue target +PI futex on behalf of the top waiter. If it can, this waiter is +woken. futex_requeue() then proceeds to requeue the remaining +nr_wake+nr_requeue tasks to the PI futex, calling +rt_mutex_start_proxy_lock() prior to each requeue to prepare the +task as a waiter on the underlying rt_mutex. It is possible that +the lock can be acquired at this stage as well, if so, the next +waiter is woken to finish the acquisition of the lock. + +FUTEX_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but +their sum is all that really matters. futex_requeue() will wake or +requeue up to nr_wake + nr_requeue tasks. It will wake only as many +tasks as it can acquire the lock for, which in the majority of cases +should be 0 as good programming practice dictates that the caller of +either pthread_cond_broadcast() or pthread_cond_signal() acquire the +mutex prior to making the call. FUTEX_REQUEUE_PI requires that +nr_wake=1. nr_requeue should be INT_MAX for broadcast and 0 for +signal. diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 145c25a..e4b6985 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -458,7 +458,7 @@ debugfs interface, since it provides control over GPIO direction and value instead of just showing a gpio state summary. Plus, it could be present on production systems without debugging support. -Given approprate hardware documentation for the system, userspace could +Given appropriate hardware documentation for the system, userspace could know for example that GPIO #23 controls the write protect line used to protect boot loader segments in flash memory. System upgrade procedures may need to temporarily remove that protection, first importing a GPIO, diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores index cfcebb1..c269aaa 100644 --- a/Documentation/i2c/busses/i2c-ocores +++ b/Documentation/i2c/busses/i2c-ocores @@ -20,6 +20,8 @@ platform_device with the base address and interrupt number. The dev.platform_data of the device should also point to a struct ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the distance between registers and the input clock speed. +There is also a possibility to attach a list of i2c_board_info which +the i2c-ocores driver will add to the bus upon creation. E.G. something like: @@ -36,9 +38,24 @@ static struct resource ocores_resources[] = { }, }; +/* optional board info */ +struct i2c_board_info ocores_i2c_board_info[] = { + { + I2C_BOARD_INFO("tsc2003", 0x48), + .platform_data = &tsc2003_platform_data, + .irq = TSC_IRQ + }, + { + I2C_BOARD_INFO("adv7180", 0x42 >> 1), + .irq = ADV_IRQ + } +}; + static struct ocores_i2c_platform_data myi2c_data = { .regstep = 2, /* two bytes between registers */ .clock_khz = 50000, /* input clock of 50MHz */ + .devices = ocores_i2c_board_info, /* optional table of devices */ + .num_devices = ARRAY_SIZE(ocores_i2c_board_info), /* table size */ }; static struct platform_device myi2c = { diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt index 0c78f4b..e77bebf 100644 --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -216,6 +216,8 @@ Other kernel parameters for ide_core are: * "noflush=[interface_number.device_number]" to disable flush requests +* "nohpa=[interface_number.device_number]" to disable Host Protected Area + * "noprobe=[interface_number.device_number]" to skip probing * "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX index 5a2d699..f6010a5 100644 --- a/Documentation/isdn/00-INDEX +++ b/Documentation/isdn/00-INDEX @@ -22,16 +22,11 @@ README.gigaset - info on the drivers for Siemens Gigaset ISDN adapters. README.icn - info on the ICN-ISDN-card and its driver. +>>>>>>> 93af7aca44f0e82e67bda10a0fb73d383edcc8bd:Documentation/isdn/00-INDEX README.HiSax - info on the HiSax driver which replaces the old teles. -README.hfc-pci - - info on hfc-pci based cards. -README.pcbit - - info on the PCBIT-D ISDN adapter and driver. -README.syncppp - - info on running Sync PPP over ISDN. -syncPPP.FAQ - - frequently asked questions about running PPP over ISDN. +README.audio + - info for running audio over ISDN. README.avmb1 - info on driver for AVM-B1 ISDN card. README.act2000 @@ -42,10 +37,28 @@ README.concap - info on "CONCAP" encapsulation protocol interface used for X.25. README.diversion - info on module for isdn diversion services. +README.fax + - info for using Fax over ISDN. +README.gigaset + - info on the drivers for Siemens Gigaset ISDN adapters +README.hfc-pci + - info on hfc-pci based cards. +README.hysdn + - info on driver for Hypercope active HYSDN cards +README.icn + - info on the ICN-ISDN-card and its driver. +README.mISDN + - info on the Modular ISDN subsystem (mISDN) +README.pcbit + - info on the PCBIT-D ISDN adapter and driver. README.sc - info on driver for Spellcaster cards. +README.syncppp + - info on running Sync PPP over ISDN. README.x25 - info for running X.25 over ISDN. +syncPPP.FAQ + - frequently asked questions about running PPP over ISDN. README.hysdn - info on driver for Hypercope active HYSDN cards README.mISDN diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI index 786d619..686e107 100644 --- a/Documentation/isdn/INTERFACE.CAPI +++ b/Documentation/isdn/INTERFACE.CAPI @@ -45,7 +45,7 @@ From then on, Kernel CAPI may call the registered callback functions for the device. If the device becomes unusable for any reason (shutdown, disconnect ...), the -driver has to call capi_ctr_reseted(). This will prevent further calls to the +driver has to call capi_ctr_down(). This will prevent further calls to the callback functions by Kernel CAPI. @@ -114,20 +114,36 @@ char *driver_name int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata) (optional) pointer to a callback function for sending firmware and configuration data to the device + Return value: 0 on success, error code on error + Called in process context. void (*reset_ctr)(struct capi_ctr *ctrlr) - pointer to a callback function for performing a reset on the device, - releasing all registered applications + (optional) pointer to a callback function for performing a reset on + the device, releasing all registered applications + Called in process context. void (*register_appl)(struct capi_ctr *ctrlr, u16 applid, capi_register_params *rparam) void (*release_appl)(struct capi_ctr *ctrlr, u16 applid) pointers to callback functions for registration and deregistration of applications with the device + Calls to these functions are serialized by Kernel CAPI so that only + one call to any of them is active at any time. u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb) pointer to a callback function for sending a CAPI message to the device + Return value: CAPI error code + If the method returns 0 (CAPI_NOERROR) the driver has taken ownership + of the skb and the caller may no longer access it. If it returns a + non-zero (error) value then ownership of the skb returns to the caller + who may reuse or free it. + The return value should only be used to signal problems with respect + to accepting or queueing the message. Errors occurring during the + actual processing of the message should be signaled with an + appropriate reply message. + Calls to this function are not serialized by Kernel CAPI, ie. it must + be prepared to be re-entered. char *(*procinfo)(struct capi_ctr *ctrlr) pointer to a callback function returning the entry for the device in @@ -138,6 +154,8 @@ read_proc_t *ctr_read_proc system entry, /proc/capi/controllers/; will be called with a pointer to the device's capi_ctr structure as the last (data) argument +Note: Callback functions are never called in interrupt context. + - to be filled in before calling capi_ctr_ready(): u8 manu[CAPI_MANUFACTURER_LEN] @@ -153,6 +171,45 @@ u8 serial[CAPI_SERIAL_LEN] value to return for CAPI_GET_SERIAL +4.3 The _cmsg Structure + +(declared in ) + +The _cmsg structure stores the contents of a CAPI 2.0 message in an easily +accessible form. It contains members for all possible CAPI 2.0 parameters, of +which only those appearing in the message type currently being processed are +actually used. Unused members should be set to zero. + +Members are named after the CAPI 2.0 standard names of the parameters they +represent. See for the exact spelling. Member data +types are: + +u8 for CAPI parameters of type 'byte' + +u16 for CAPI parameters of type 'word' + +u32 for CAPI parameters of type 'dword' + +_cstruct for CAPI parameters of type 'struct' not containing any + variably-sized (struct) subparameters (eg. 'Called Party Number') + The member is a pointer to a buffer containing the parameter in + CAPI encoding (length + content). It may also be NULL, which will + be taken to represent an empty (zero length) parameter. + +_cmstruct for CAPI parameters of type 'struct' containing 'struct' + subparameters ('Additional Info' and 'B Protocol') + The representation is a single byte containing one of the values: + CAPI_DEFAULT: the parameter is empty + CAPI_COMPOSE: the values of the subparameters are stored + individually in the corresponding _cmsg structure members + +Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert +messages between their transport encoding described in the CAPI 2.0 standard +and their _cmsg structure representation. Note that capi_cmsg2message() does +not know or check the size of its destination buffer. The caller must make +sure it is big enough to accomodate the resulting CAPI message. + + 5. Lower Layer Interface Functions (declared in ) @@ -166,7 +223,7 @@ int detach_capi_ctr(struct capi_ctr *ctrlr) register/unregister a device (controller) with Kernel CAPI void capi_ctr_ready(struct capi_ctr *ctrlr) -void capi_ctr_reseted(struct capi_ctr *ctrlr) +void capi_ctr_down(struct capi_ctr *ctrlr) signal controller ready/not ready void capi_ctr_suspend_output(struct capi_ctr *ctrlr) @@ -211,3 +268,32 @@ CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI (u32) CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16) + +Library functions for working with _cmsg structures +(from ): + +unsigned capi_cmsg2message(_cmsg *cmsg, u8 *msg) + Assembles a CAPI 2.0 message from the parameters in *cmsg, storing the + result in *msg. + +unsigned capi_message2cmsg(_cmsg *cmsg, u8 *msg) + Disassembles the CAPI 2.0 message in *msg, storing the parameters in + *cmsg. + +unsigned capi_cmsg_header(_cmsg *cmsg, u16 ApplId, u8 Command, u8 Subcommand, + u16 Messagenumber, u32 Controller) + Fills the header part and address field of the _cmsg structure *cmsg + with the given values, zeroing the remainder of the structure so only + parameters with non-default values need to be changed before sending + the message. + +void capi_cmsg_answer(_cmsg *cmsg) + Sets the low bit of the Subcommand field in *cmsg, thereby converting + _REQ to _CONF and _IND to _RESP. + +char *capi_cmd2str(u8 Command, u8 Subcommand) + Returns the CAPI 2.0 message name corresponding to the given command + and subcommand values, as a static ASCII string. The return value may + be NULL if the command/subcommand is not one of those defined in the + CAPI 2.0 standard. + diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index 02c0e93..f996310 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -149,10 +149,8 @@ GigaSet 307x Device Driver configuration files and chat scripts in the gigaset-VERSION/ppp directory in the driver packages from http://sourceforge.net/projects/gigaset307x/. Please note that the USB drivers are not able to change the state of the - control lines (the M105 driver can be configured to use some undocumented - control requests, if you really need the control lines, though). This means - you must use "Stupid Mode" if you are using wvdial or you should use the - nocrtscts option of pppd. + control lines. This means you must use "Stupid Mode" if you are using + wvdial or you should use the nocrtscts option of pppd. You must also assure that the ppp_async module is loaded with the parameter flag_time=0. You can do this e.g. by adding a line like @@ -190,20 +188,19 @@ GigaSet 307x Device Driver You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode setting (ttyGxy is ttyGU0 or ttyGB0). -2.6. M105 Undocumented USB Requests - ------------------------------ - - The Gigaset M105 USB data box understands a couple of useful, but - undocumented USB commands. These requests are not used in normal - operation (for wireless access to the base), but are needed for access - to the M105's own configuration mode (registration to the base, baudrate - and line format settings, device status queries) via the gigacontr - utility. Their use is controlled by the kernel configuration option - "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you - encounter error code -ENOTTY when trying to use some features of the - M105, try setting that option to "y" via 'make {x,menu}config' and - recompiling the driver. - +2.6. Unregistered Wireless Devices (M101/M105) + ----------------------------------------- + The main purpose of the ser_gigaset and usb_gigaset drivers is to allow + the M101 and M105 wireless devices to be used as ISDN devices for ISDN + connections through a Gigaset base. Therefore they assume that the device + is registered to a DECT base. + + If the M101/M105 device is not registered to a base, initialization of + the device fails, and a corresponding error message is logged by the + driver. In that situation, a restricted set of functions is available + which includes, in particular, those necessary for registering the device + to a base or for switching it between Fixed Part and Portable Part + modes. 3. Troubleshooting --------------- @@ -234,11 +231,12 @@ GigaSet 307x Device Driver Select Unimodem mode for all DECT data adapters. (see section 2.4.) Problem: - You want to configure your USB DECT data adapter (M105) but gigacontr - reports an error: "/dev/ttyGU0: Inappropriate ioctl for device". + Messages like this: + usb_gigaset 3-2:1.0: Could not initialize the device. + appear in your syslog. Solution: - Recompile the usb_gigaset driver with the kernel configuration option - CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.) + Check whether your M10x wireless device is correctly registered to the + Gigaset base. (see section 2.6.) 3.2. Telling the driver to provide more information ---------------------------------------------- diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 26a7c0a..849b5e5 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -35,48 +35,26 @@ new .config files to see the differences: (Yes, we need something better here.) - -====================================================================== -menuconfig --------------------------------------------------- - -SEARCHING for CONFIG symbols - -Searching in menuconfig: - - The Search function searches for kernel configuration symbol - names, so you have to know something close to what you are - looking for. - - Example: - /hotplug - This lists all config symbols that contain "hotplug", - e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG. - - For search help, enter / followed TAB-TAB-TAB (to highlight - ) and Enter. This will tell you that you can also use - regular expressions (regexes) in the search string, so if you - are not interested in MEMORY_HOTPLUG, you could try - - /^hotplug - - ______________________________________________________________________ -Color Themes for 'menuconfig' +Environment variables for '*config' -It is possible to select different color themes using the variable -MENUCONFIG_COLOR. To select a theme use: +KCONFIG_CONFIG +-------------------------------------------------- +This environment variable can be used to specify a default kernel config +file name to override the default name of ".config". - make MENUCONFIG_COLOR= menuconfig +KCONFIG_OVERWRITECONFIG +-------------------------------------------------- +If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not +break symlinks when .config is a symlink to somewhere else. -Available themes are: - mono => selects colors suitable for monochrome displays - blackbg => selects a color scheme with black background - classic => theme with blue background. The classic look - bluetitle => a LCD friendly version of classic. (default) +KCONFIG_NOTIMESTAMP +-------------------------------------------------- +If this environment variable exists and is non-null, the timestamp line +in generated .config files is omitted. ______________________________________________________________________ -Environment variables in 'menuconfig' +Environment variables for '{allyes/allmod/allno/rand}config' KCONFIG_ALLCONFIG -------------------------------------------------- @@ -95,8 +73,7 @@ values. This enables you to create "miniature" config (miniconfig) or custom config files containing just the config symbols that you are interested in. Then the kernel config system generates the full .config file, -including dependencies of your miniconfig file, based on the miniconfig -file. +including symbols of your miniconfig file. This 'KCONFIG_ALLCONFIG' file is a config file which contains (usually a subset of all) preset config symbols. These variable @@ -113,26 +90,14 @@ These examples will disable most options (allnoconfig) but enable or disable the options that are explicitly listed in the specified mini-config files. +______________________________________________________________________ +Environment variables for 'silentoldconfig' + KCONFIG_NOSILENTUPDATE -------------------------------------------------- If this variable has a non-blank value, it prevents silent kernel config udpates (requires explicit updates). -KCONFIG_CONFIG --------------------------------------------------- -This environment variable can be used to specify a default kernel config -file name to override the default name of ".config". - -KCONFIG_OVERWRITECONFIG --------------------------------------------------- -If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not -break symlinks when .config is a symlink to somewhere else. - -KCONFIG_NOTIMESTAMP --------------------------------------------------- -If this environment variable exists and is non-null, the timestamp line -in generated .config files is omitted. - KCONFIG_AUTOCONFIG -------------------------------------------------- This environment variable can be set to specify the path & name of the @@ -143,15 +108,54 @@ KCONFIG_AUTOHEADER This environment variable can be set to specify the path & name of the "autoconf.h" (header) file. Its default value is "include/linux/autoconf.h". + +====================================================================== +menuconfig +-------------------------------------------------- + +SEARCHING for CONFIG symbols + +Searching in menuconfig: + + The Search function searches for kernel configuration symbol + names, so you have to know something close to what you are + looking for. + + Example: + /hotplug + This lists all config symbols that contain "hotplug", + e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG. + + For search help, enter / followed TAB-TAB-TAB (to highlight + ) and Enter. This will tell you that you can also use + regular expressions (regexes) in the search string, so if you + are not interested in MEMORY_HOTPLUG, you could try + + /^hotplug + ______________________________________________________________________ -menuconfig User Interface Options ----------------------------------------------------------------------- +User interface options for 'menuconfig' + +MENUCONFIG_COLOR +-------------------------------------------------- +It is possible to select different color themes using the variable +MENUCONFIG_COLOR. To select a theme use: + + make MENUCONFIG_COLOR= menuconfig + +Available themes are: + mono => selects colors suitable for monochrome displays + blackbg => selects a color scheme with black background + classic => theme with blue background. The classic look + bluetitle => a LCD friendly version of classic. (default) + MENUCONFIG_MODE -------------------------------------------------- This mode shows all sub-menus in one large tree. Example: - MENUCONFIG_MODE=single_menu make menuconfig + make MENUCONFIG_MODE=single_menu menuconfig + ====================================================================== xconfig diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt index b1096da..0767cf6 100644 --- a/Documentation/kbuild/modules.txt +++ b/Documentation/kbuild/modules.txt @@ -275,7 +275,7 @@ following files: KERNELDIR := /lib/modules/`uname -r`/build all:: - $(MAKE) -C $KERNELDIR M=`pwd` $@ + $(MAKE) -C $(KERNELDIR) M=`pwd` $@ # Module specific targets genbin: diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt index 3f4bc84..cab61d8 100644 --- a/Documentation/kdump/kdump.txt +++ b/Documentation/kdump/kdump.txt @@ -108,7 +108,7 @@ There are two possible methods of using Kdump. 2) Or use the system kernel binary itself as dump-capture kernel and there is no need to build a separate dump-capture kernel. This is possible - only with the architecutres which support a relocatable kernel. As + only with the architectures which support a relocatable kernel. As of today, i386, x86_64, ppc64 and ia64 architectures support relocatable kernel. @@ -222,7 +222,7 @@ Dump-capture kernel config options (Arch Dependent, ia64) ---------------------------------------------------------- - No specific options are required to create a dump-capture kernel - for ia64, other than those specified in the arch idependent section + for ia64, other than those specified in the arch independent section above. This means that it is possible to use the system kernel as a dump-capture kernel if desired. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index fd5cac0..ad38006 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -56,7 +56,6 @@ parameter is applicable: ISAPNP ISA PnP code is enabled. ISDN Appropriate ISDN support is enabled. JOY Appropriate joystick support is enabled. - KMEMTRACE kmemtrace is enabled. LIBATA Libata driver is enabled LP Printer support is enabled. LOOP Loopback device support is enabled. @@ -329,11 +328,6 @@ and is between 256 and 4096 characters. It is defined in the file flushed before they will be reused, which is a lot of faster - amd_iommu_size= [HW,X86-64] - Define the size of the aperture for the AMD IOMMU - driver. Possible values are: - '32M', '64M' (default), '128M', '256M', '512M', '1G' - amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: , @@ -497,6 +491,13 @@ and is between 256 and 4096 characters. It is defined in the file Also note the kernel might malfunction if you disable some critical bits. + cmo_free_hint= [PPC] Format: { yes | no } + Specify whether pages are marked as being inactive + when they are freed. This is used in CMO environments + to determine OS memory pressure for page stealing by + a hypervisor. + Default: yes + code_bytes [X86] How many bytes of object code to print in an oops report. Range: 0 - 8192 @@ -646,6 +647,13 @@ and is between 256 and 4096 characters. It is defined in the file DMA-API debugging code disables itself because the architectural default is too low. + dma_debug_driver= + With this option the DMA-API debugging driver + filter feature can be enabled at boot time. Just + pass the driver to filter for as the parameter. + The filter can be disabled or changed to another + driver later using sysfs. + dscc4.setup= [NET] dtc3181e= [HW,SCSI] @@ -752,12 +760,25 @@ and is between 256 and 4096 characters. It is defined in the file ia64_pal_cache_flush instead of SAL_CACHE_FLUSH. ftrace=[tracer] - [ftrace] will set and start the specified tracer + [FTRACE] will set and start the specified tracer as early as possible in order to facilitate early boot debugging. ftrace_dump_on_oops - [ftrace] will dump the trace buffers on oops. + [FTRACE] will dump the trace buffers on oops. + + ftrace_filter=[function-list] + [FTRACE] Limit the functions traced by the function + tracer at boot up. function-list is a comma separated + list of functions. This list can be changed at run + time by the set_ftrace_filter file in the debugfs + tracing directory. + + ftrace_notrace=[function-list] + [FTRACE] Do not trace the functions specified in + function-list. This list can be changed at run time + by the set_ftrace_notrace file in the debugfs + tracing directory. gamecon.map[2|3]= [HW,JOY] Multisystem joystick and NES/SNES/PSX pad @@ -873,11 +894,8 @@ and is between 256 and 4096 characters. It is defined in the file ide-core.nodma= [HW] (E)IDE subsystem Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc - .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom - .chs .ignore_cable are additional options - See Documentation/ide/ide.txt. - - idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed + .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr + .cdrom .chs .ignore_cable are additional options See Documentation/ide/ide.txt. ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem @@ -914,6 +932,12 @@ and is between 256 and 4096 characters. It is defined in the file Formt: { "sha1" | "md5" } default: "sha1" + ima_tcb [IMA] + Load a policy which meets the needs of the Trusted + Computing Base. This means IMA will measure all + programs exec'd, files mmap'd for exec, and all files + opened for read by uid=0. + in2000= [HW,SCSI] See header of drivers/scsi/in2000.c. @@ -1054,24 +1078,19 @@ and is between 256 and 4096 characters. It is defined in the file use the HighMem zone if it exists, and the Normal zone if it does not. - kmemtrace.enable= [KNL,KMEMTRACE] Format: { yes | no } - Controls whether kmemtrace is enabled - at boot-time. - - kmemtrace.subbufs=n [KNL,KMEMTRACE] Overrides the number of - subbufs kmemtrace's relay channel has. Set this - higher than default (KMEMTRACE_N_SUBBUFS in code) if - you experience buffer overruns. - kgdboc= [HW] kgdb over consoles. Requires a tty driver that supports console polling. - (only serial suported for now) + (only serial supported for now) Format: [,baud] kmac= [MIPS] korina ethernet MAC address. Configure the RouterBoard 532 series on-chip Ethernet adapter MAC address. + kmemleak= [KNL] Boot-time kmemleak enable/disable + Valid arguments: on, off + Default: on + kstack=N [X86] Print N words from the kernel stack in oops dumps. @@ -1390,7 +1409,7 @@ and is between 256 and 4096 characters. It is defined in the file ('y', default) or cooked coordinates ('n') mtrr_chunk_size=nn[KMG] [X86] - used for mtrr cleanup. It is largest continous chunk + used for mtrr cleanup. It is largest continuous chunk that could hold holes aka. UC entries. mtrr_gran_size=nn[KMG] [X86] @@ -1575,6 +1594,9 @@ and is between 256 and 4096 characters. It is defined in the file noinitrd [RAM] Tells the kernel not to load any configured initial RAM disk. + nointremap [X86-64, Intel-IOMMU] Do not enable interrupt + remapping. + nointroute [IA-64] nojitter [IA64] Disables jitter checking for ITC timers. @@ -1660,6 +1682,14 @@ and is between 256 and 4096 characters. It is defined in the file oprofile.timer= [HW] Use timer interrupt instead of performance counters + oprofile.cpu_type= Force an oprofile cpu type + This might be useful if you have an older oprofile + userland or if you want common events. + Format: { archperfmon } + archperfmon: [X86] Force use of architectural + perfmon on Intel CPUs instead of the + CPU specific event set. + osst= [HW,SCSI] SCSI Tape Driver Format: , See also Documentation/scsi/st.txt. diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt new file mode 100644 index 0000000..0112da3 --- /dev/null +++ b/Documentation/kmemleak.txt @@ -0,0 +1,142 @@ +Kernel Memory Leak Detector +=========================== + +Introduction +------------ + +Kmemleak provides a way of detecting possible kernel memory leaks in a +way similar to a tracing garbage collector +(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors), +with the difference that the orphan objects are not freed but only +reported via /sys/kernel/debug/kmemleak. A similar method is used by the +Valgrind tool (memcheck --leak-check) to detect the memory leaks in +user-space applications. + +Usage +----- + +CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel +thread scans the memory every 10 minutes (by default) and prints any new +unreferenced objects found. To trigger an intermediate scan and display +all the possible memory leaks: + + # mount -t debugfs nodev /sys/kernel/debug/ + # cat /sys/kernel/debug/kmemleak + +Note that the orphan objects are listed in the order they were allocated +and one object at the beginning of the list may cause other subsequent +objects to be reported as orphan. + +Memory scanning parameters can be modified at run-time by writing to the +/sys/kernel/debug/kmemleak file. The following parameters are supported: + + off - disable kmemleak (irreversible) + stack=on - enable the task stacks scanning + stack=off - disable the tasks stacks scanning + scan=on - start the automatic memory scanning thread + scan=off - stop the automatic memory scanning thread + scan= - set the automatic memory scanning period in seconds (0 + to disable it) + +Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on +the kernel command line. + +Basic Algorithm +--------------- + +The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and +friends are traced and the pointers, together with additional +information like size and stack trace, are stored in a prio search tree. +The corresponding freeing function calls are tracked and the pointers +removed from the kmemleak data structures. + +An allocated block of memory is considered orphan if no pointer to its +start address or to any location inside the block can be found by +scanning the memory (including saved registers). This means that there +might be no way for the kernel to pass the address of the allocated +block to a freeing function and therefore the block is considered a +memory leak. + +The scanning algorithm steps: + + 1. mark all objects as white (remaining white objects will later be + considered orphan) + 2. scan the memory starting with the data section and stacks, checking + the values against the addresses stored in the prio search tree. If + a pointer to a white object is found, the object is added to the + gray list + 3. scan the gray objects for matching addresses (some white objects + can become gray and added at the end of the gray list) until the + gray set is finished + 4. the remaining white objects are considered orphan and reported via + /sys/kernel/debug/kmemleak + +Some allocated memory blocks have pointers stored in the kernel's +internal data structures and they cannot be detected as orphans. To +avoid this, kmemleak can also store the number of values pointing to an +address inside the block address range that need to be found so that the +block is not considered a leak. One example is __vmalloc(). + +Kmemleak API +------------ + +See the include/linux/kmemleak.h header for the functions prototype. + +kmemleak_init - initialize kmemleak +kmemleak_alloc - notify of a memory block allocation +kmemleak_free - notify of a memory block freeing +kmemleak_not_leak - mark an object as not a leak +kmemleak_ignore - do not scan or report an object as leak +kmemleak_scan_area - add scan areas inside a memory block +kmemleak_no_scan - do not scan a memory block +kmemleak_erase - erase an old value in a pointer variable +kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness +kmemleak_free_recursive - as kmemleak_free but checks the recursiveness + +Dealing with false positives/negatives +-------------------------------------- + +The false negatives are real memory leaks (orphan objects) but not +reported by kmemleak because values found during the memory scanning +point to such objects. To reduce the number of false negatives, kmemleak +provides the kmemleak_ignore, kmemleak_scan_area, kmemleak_no_scan and +kmemleak_erase functions (see above). The task stacks also increase the +amount of false negatives and their scanning is not enabled by default. + +The false positives are objects wrongly reported as being memory leaks +(orphan). For objects known not to be leaks, kmemleak provides the +kmemleak_not_leak function. The kmemleak_ignore could also be used if +the memory block is known not to contain other pointers and it will no +longer be scanned. + +Some of the reported leaks are only transient, especially on SMP +systems, because of pointers temporarily stored in CPU registers or +stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing +the minimum age of an object to be reported as a memory leak. + +Limitations and Drawbacks +------------------------- + +The main drawback is the reduced performance of memory allocation and +freeing. To avoid other penalties, the memory scanning is only performed +when the /sys/kernel/debug/kmemleak file is read. Anyway, this tool is +intended for debugging purposes where the performance might not be the +most important requirement. + +To keep the algorithm simple, kmemleak scans for values pointing to any +address inside a block's address range. This may lead to an increased +number of false negatives. However, it is likely that a real memory leak +will eventually become visible. + +Another source of false negatives is the data stored in non-pointer +values. In a future version, kmemleak could only scan the pointer +members in the allocated structures. This feature would solve many of +the false negative cases described above. + +The tool can report false positives. These are cases where an allocated +block doesn't need to be freed (some cases in the init_call functions), +the pointer is calculated by other methods than the usual container_of +macro or the pointer is stored in a location not scanned by kmemleak. + +Page allocations and ioremap are not tracked. Only the ARM and x86 +architectures are currently supported. diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index b2e3745..c79ab99 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -132,7 +132,7 @@ kobject_name(): const char *kobject_name(const struct kobject * kobj); There is a helper function to both initialize and add the kobject to the -kernel at the same time, called supprisingly enough kobject_init_and_add(): +kernel at the same time, called surprisingly enough kobject_init_and_add(): int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype, struct kobject *parent, const char *fmt, ...); diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt index 5ee2a02..0768fcc 100644 --- a/Documentation/laptops/acer-wmi.txt +++ b/Documentation/laptops/acer-wmi.txt @@ -40,7 +40,7 @@ NOTE: The Acer Aspire One is not supported hardware. It cannot work with acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been blacklisted until that happens. -Please see the website for the current list of known working hardare: +Please see the website for the current list of known working hardware: http://code.google.com/p/aceracpi/wiki/SupportedHardware diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.txt index 8b2bc15..23ce7d3 100644 --- a/Documentation/laptops/sony-laptop.txt +++ b/Documentation/laptops/sony-laptop.txt @@ -22,7 +22,7 @@ If your laptop model supports it, you will find sysfs files in the /sys/class/backlight/sony/ directory. You will be able to query and set the current screen brightness: - brightness get/set screen brightness (an iteger + brightness get/set screen brightness (an integer between 0 and 7) actual_brightness reading from this file will query the HW to get real brightness value diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index e7e9a69..78e354b 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -506,7 +506,7 @@ generate input device EV_KEY events. In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW events for switches: -SW_RFKILL_ALL T60 and later hardare rfkill rocker switch +SW_RFKILL_ALL T60 and later hardware rfkill rocker switch SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A Non hot-key ACPI HKEY event map: diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile index 1f4f9e8..28c8cdf 100644 --- a/Documentation/lguest/Makefile +++ b/Documentation/lguest/Makefile @@ -1,6 +1,5 @@ # This creates the demonstration utility "lguest" which runs a Linux guest. -CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE -LDLIBS:=-lz +CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE all: lguest diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index d36fcc0..9ebcd6e 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -59,7 +60,6 @@ typedef uint8_t u8; /*:*/ #define PAGE_PRESENT 0x7 /* Present, RW, Execute */ -#define NET_PEERNUM 1 #define BRIDGE_PFX "bridge:" #ifndef SIOCBRADDIF #define SIOCBRADDIF 0x89a2 /* add interface to bridge */ @@ -76,19 +76,12 @@ static bool verbose; do { if (verbose) printf(args); } while(0) /*:*/ -/* File descriptors for the Waker. */ -struct { - int pipe[2]; - int lguest_fd; -} waker_fds; - /* The pointer to the start of guest memory. */ static void *guest_base; /* The maximum guest physical address allowed, and maximum possible. */ static unsigned long guest_limit, guest_max; -/* The pipe for signal hander to write to. */ -static int timeoutpipe[2]; -static unsigned int timeout_usec = 500; +/* The /dev/lguest file descriptor. */ +static int lguest_fd; /* a per-cpu variable indicating whose vcpu is currently running */ static unsigned int __thread cpu_id; @@ -96,11 +89,6 @@ static unsigned int __thread cpu_id; /* This is our list of devices. */ struct device_list { - /* Summary information about the devices in our list: ready to pass to - * select() to ask which need servicing.*/ - fd_set infds; - int max_infd; - /* Counter to assign interrupt numbers. */ unsigned int next_irq; @@ -126,22 +114,21 @@ struct device /* The linked-list pointer. */ struct device *next; - /* The this device's descriptor, as mapped into the Guest. */ + /* The device's descriptor, as mapped into the Guest. */ struct lguest_device_desc *desc; + /* We can't trust desc values once Guest has booted: we use these. */ + unsigned int feature_len; + unsigned int num_vq; + /* The name of this device, for --verbose. */ const char *name; - /* If handle_input is set, it wants to be called when this file - * descriptor is ready. */ - int fd; - bool (*handle_input)(int fd, struct device *me); - /* Any queues attached to this device */ struct virtqueue *vq; - /* Handle status being finalized (ie. feature bits stable). */ - void (*ready)(struct device *me); + /* Is it operational */ + bool running; /* Device-specific data. */ void *priv; @@ -164,22 +151,28 @@ struct virtqueue /* Last available index we saw. */ u16 last_avail_idx; - /* The routine to call when the Guest pings us, or timeout. */ - void (*handle_output)(int fd, struct virtqueue *me, bool timeout); + /* How many are used since we sent last irq? */ + unsigned int pending_used; - /* Outstanding buffers */ - unsigned int inflight; + /* Eventfd where Guest notifications arrive. */ + int eventfd; - /* Is this blocked awaiting a timer? */ - bool blocked; + /* Function for the thread which is servicing this virtqueue. */ + void (*service)(struct virtqueue *vq); + pid_t thread; }; /* Remember the arguments to the program so we can "reboot" */ static char **main_args; -/* Since guest is UP and we don't run at the same time, we don't need barriers. - * But I include them in the code in case others copy it. */ -#define wmb() +/* The original tty settings to restore on exit. */ +static struct termios orig_term; + +/* We have to be careful with barriers: our devices are all run in separate + * threads and so we need to make sure that changes visible to the Guest happen + * in precise order. */ +#define wmb() __asm__ __volatile__("" : : : "memory") +#define mb() __asm__ __volatile__("" : : : "memory") /* Convert an iovec element to the given type. * @@ -245,7 +238,7 @@ static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len) static u8 *get_feature_bits(struct device *dev) { return (u8 *)(dev->desc + 1) - + dev->desc->num_vq * sizeof(struct lguest_vqconfig); + + dev->num_vq * sizeof(struct lguest_vqconfig); } /*L:100 The Launcher code itself takes us out into userspace, that scary place @@ -505,99 +498,19 @@ static void concat(char *dst, char *args[]) * saw the arguments it expects when we looked at initialize() in lguest_user.c: * the base of Guest "physical" memory, the top physical page to allow and the * entry point for the Guest. */ -static int tell_kernel(unsigned long start) +static void tell_kernel(unsigned long start) { unsigned long args[] = { LHREQ_INITIALIZE, (unsigned long)guest_base, guest_limit / getpagesize(), start }; - int fd; - verbose("Guest: %p - %p (%#lx)\n", guest_base, guest_base + guest_limit, guest_limit); - fd = open_or_die("/dev/lguest", O_RDWR); - if (write(fd, args, sizeof(args)) < 0) + lguest_fd = open_or_die("/dev/lguest", O_RDWR); + if (write(lguest_fd, args, sizeof(args)) < 0) err(1, "Writing to /dev/lguest"); - - /* We return the /dev/lguest file descriptor to control this Guest */ - return fd; } /*:*/ -static void add_device_fd(int fd) -{ - FD_SET(fd, &devices.infds); - if (fd > devices.max_infd) - devices.max_infd = fd; -} - -/*L:200 - * The Waker. - * - * With console, block and network devices, we can have lots of input which we - * need to process. We could try to tell the kernel what file descriptors to - * watch, but handing a file descriptor mask through to the kernel is fairly - * icky. - * - * Instead, we clone off a thread which watches the file descriptors and writes - * the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host - * stop running the Guest. This causes the Launcher to return from the - * /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset - * the LHREQ_BREAK and wake us up again. - * - * This, of course, is merely a different *kind* of icky. - * - * Given my well-known antipathy to threads, I'd prefer to use processes. But - * it's easier to share Guest memory with threads, and trivial to share the - * devices.infds as the Launcher changes it. - */ -static int waker(void *unused) -{ - /* Close the write end of the pipe: only the Launcher has it open. */ - close(waker_fds.pipe[1]); - - for (;;) { - fd_set rfds = devices.infds; - unsigned long args[] = { LHREQ_BREAK, 1 }; - unsigned int maxfd = devices.max_infd; - - /* We also listen to the pipe from the Launcher. */ - FD_SET(waker_fds.pipe[0], &rfds); - if (waker_fds.pipe[0] > maxfd) - maxfd = waker_fds.pipe[0]; - - /* Wait until input is ready from one of the devices. */ - select(maxfd+1, &rfds, NULL, NULL, NULL); - - /* Message from Launcher? */ - if (FD_ISSET(waker_fds.pipe[0], &rfds)) { - char c; - /* If this fails, then assume Launcher has exited. - * Don't do anything on exit: we're just a thread! */ - if (read(waker_fds.pipe[0], &c, 1) != 1) - _exit(0); - continue; - } - - /* Send LHREQ_BREAK command to snap the Launcher out of it. */ - pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id); - } - return 0; -} - -/* This routine just sets up a pipe to the Waker process. */ -static void setup_waker(int lguest_fd) -{ - /* This pipe is closed when Launcher dies, telling Waker. */ - if (pipe(waker_fds.pipe) != 0) - err(1, "Creating pipe for Waker"); - - /* Waker also needs to know the lguest fd */ - waker_fds.lguest_fd = lguest_fd; - - if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1) - err(1, "Creating Waker"); -} - /* * Device Handling. * @@ -623,49 +536,90 @@ static void *_check_pointer(unsigned long addr, unsigned int size, /* Each buffer in the virtqueues is actually a chain of descriptors. This * function returns the next descriptor in the chain, or vq->vring.num if we're * at the end. */ -static unsigned next_desc(struct virtqueue *vq, unsigned int i) +static unsigned next_desc(struct vring_desc *desc, + unsigned int i, unsigned int max) { unsigned int next; /* If this descriptor says it doesn't chain, we're done. */ - if (!(vq->vring.desc[i].flags & VRING_DESC_F_NEXT)) - return vq->vring.num; + if (!(desc[i].flags & VRING_DESC_F_NEXT)) + return max; /* Check they're not leading us off end of descriptors. */ - next = vq->vring.desc[i].next; + next = desc[i].next; /* Make sure compiler knows to grab that: we don't want it changing! */ wmb(); - if (next >= vq->vring.num) + if (next >= max) errx(1, "Desc next is %u", next); return next; } +/* This actually sends the interrupt for this virtqueue */ +static void trigger_irq(struct virtqueue *vq) +{ + unsigned long buf[] = { LHREQ_IRQ, vq->config.irq }; + + /* Don't inform them if nothing used. */ + if (!vq->pending_used) + return; + vq->pending_used = 0; + + /* If they don't want an interrupt, don't send one, unless empty. */ + if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) + && lg_last_avail(vq) != vq->vring.avail->idx) + return; + + /* Send the Guest an interrupt tell them we used something up. */ + if (write(lguest_fd, buf, sizeof(buf)) != 0) + err(1, "Triggering irq %i", vq->config.irq); +} + /* This looks in the virtqueue and for the first available buffer, and converts * it to an iovec for convenient access. Since descriptors consist of some * number of output then some number of input descriptors, it's actually two * iovecs, but we pack them into one and note how many of each there were. * - * This function returns the descriptor number found, or vq->vring.num (which - * is never a valid descriptor number) if none was found. */ -static unsigned get_vq_desc(struct virtqueue *vq, - struct iovec iov[], - unsigned int *out_num, unsigned int *in_num) + * This function returns the descriptor number found. */ +static unsigned wait_for_vq_desc(struct virtqueue *vq, + struct iovec iov[], + unsigned int *out_num, unsigned int *in_num) { - unsigned int i, head; - u16 last_avail; + unsigned int i, head, max; + struct vring_desc *desc; + u16 last_avail = lg_last_avail(vq); + + while (last_avail == vq->vring.avail->idx) { + u64 event; + + /* OK, tell Guest about progress up to now. */ + trigger_irq(vq); + + /* OK, now we need to know about added descriptors. */ + vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY; + + /* They could have slipped one in as we were doing that: make + * sure it's written, then check again. */ + mb(); + if (last_avail != vq->vring.avail->idx) { + vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY; + break; + } + + /* Nothing new? Wait for eventfd to tell us they refilled. */ + if (read(vq->eventfd, &event, sizeof(event)) != sizeof(event)) + errx(1, "Event read failed?"); + + /* We don't need to be notified again. */ + vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY; + } /* Check it isn't doing very strange things with descriptor numbers. */ - last_avail = lg_last_avail(vq); if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num) errx(1, "Guest moved used index from %u to %u", last_avail, vq->vring.avail->idx); - /* If there's nothing new since last we looked, return invalid. */ - if (vq->vring.avail->idx == last_avail) - return vq->vring.num; - /* Grab the next descriptor number they're advertising, and increment * the index we've seen. */ head = vq->vring.avail->ring[last_avail % vq->vring.num]; @@ -678,15 +632,28 @@ static unsigned get_vq_desc(struct virtqueue *vq, /* When we start there are none of either input nor output. */ *out_num = *in_num = 0; + max = vq->vring.num; + desc = vq->vring.desc; i = head; + + /* If this is an indirect entry, then this buffer contains a descriptor + * table which we handle as if it's any normal descriptor chain. */ + if (desc[i].flags & VRING_DESC_F_INDIRECT) { + if (desc[i].len % sizeof(struct vring_desc)) + errx(1, "Invalid size for indirect buffer table"); + + max = desc[i].len / sizeof(struct vring_desc); + desc = check_pointer(desc[i].addr, desc[i].len); + i = 0; + } + do { /* Grab the first descriptor, and check it's OK. */ - iov[*out_num + *in_num].iov_len = vq->vring.desc[i].len; + iov[*out_num + *in_num].iov_len = desc[i].len; iov[*out_num + *in_num].iov_base - = check_pointer(vq->vring.desc[i].addr, - vq->vring.desc[i].len); + = check_pointer(desc[i].addr, desc[i].len); /* If this is an input descriptor, increment that count. */ - if (vq->vring.desc[i].flags & VRING_DESC_F_WRITE) + if (desc[i].flags & VRING_DESC_F_WRITE) (*in_num)++; else { /* If it's an output descriptor, they're all supposed @@ -697,11 +664,10 @@ static unsigned get_vq_desc(struct virtqueue *vq, } /* If we've got too many, that implies a descriptor loop. */ - if (*out_num + *in_num > vq->vring.num) + if (*out_num + *in_num > max) errx(1, "Looped descriptor"); - } while ((i = next_desc(vq, i)) != vq->vring.num); + } while ((i = next_desc(desc, i, max)) != max); - vq->inflight++; return head; } @@ -719,44 +685,20 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len) /* Make sure buffer is written before we update index. */ wmb(); vq->vring.used->idx++; - vq->inflight--; -} - -/* This actually sends the interrupt for this virtqueue */ -static void trigger_irq(int fd, struct virtqueue *vq) -{ - unsigned long buf[] = { LHREQ_IRQ, vq->config.irq }; - - /* If they don't want an interrupt, don't send one, unless empty. */ - if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) - && vq->inflight) - return; - - /* Send the Guest an interrupt tell them we used something up. */ - if (write(fd, buf, sizeof(buf)) != 0) - err(1, "Triggering irq %i", vq->config.irq); + vq->pending_used++; } /* And here's the combo meal deal. Supersize me! */ -static void add_used_and_trigger(int fd, struct virtqueue *vq, - unsigned int head, int len) +static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len) { add_used(vq, head, len); - trigger_irq(fd, vq); + trigger_irq(vq); } /* * The Console * - * Here is the input terminal setting we save, and the routine to restore them - * on exit so the user gets their terminal back. */ -static struct termios orig_term; -static void restore_term(void) -{ - tcsetattr(STDIN_FILENO, TCSANOW, &orig_term); -} - -/* We associate some data with the console for our exit hack. */ + * We associate some data with the console for our exit hack. */ struct console_abort { /* How many times have they hit ^C? */ @@ -766,276 +708,275 @@ struct console_abort }; /* This is the routine which handles console input (ie. stdin). */ -static bool handle_console_input(int fd, struct device *dev) +static void console_input(struct virtqueue *vq) { int len; unsigned int head, in_num, out_num; - struct iovec iov[dev->vq->vring.num]; - struct console_abort *abort = dev->priv; - - /* First we need a console buffer from the Guests's input virtqueue. */ - head = get_vq_desc(dev->vq, iov, &out_num, &in_num); - - /* If they're not ready for input, stop listening to this file - * descriptor. We'll start again once they add an input buffer. */ - if (head == dev->vq->vring.num) - return false; + struct console_abort *abort = vq->dev->priv; + struct iovec iov[vq->vring.num]; + /* Make sure there's a descriptor waiting. */ + head = wait_for_vq_desc(vq, iov, &out_num, &in_num); if (out_num) errx(1, "Output buffers in console in queue?"); - /* This is why we convert to iovecs: the readv() call uses them, and so - * it reads straight into the Guest's buffer. */ - len = readv(dev->fd, iov, in_num); + /* Read it in. */ + len = readv(STDIN_FILENO, iov, in_num); if (len <= 0) { - /* This implies that the console is closed, is /dev/null, or - * something went terribly wrong. */ + /* Ran out of input? */ warnx("Failed to get console input, ignoring console."); - /* Put the input terminal back. */ - restore_term(); - /* Remove callback from input vq, so it doesn't restart us. */ - dev->vq->handle_output = NULL; - /* Stop listening to this fd: don't call us again. */ - return false; + /* For simplicity, dying threads kill the whole Launcher. So + * just nap here. */ + for (;;) + pause(); } - /* Tell the Guest about the new input. */ - add_used_and_trigger(fd, dev->vq, head, len); + add_used_and_trigger(vq, head, len); /* Three ^C within one second? Exit. * - * This is such a hack, but works surprisingly well. Each ^C has to be - * in a buffer by itself, so they can't be too fast. But we check that - * we get three within about a second, so they can't be too slow. */ - if (len == 1 && ((char *)iov[0].iov_base)[0] == 3) { - if (!abort->count++) - gettimeofday(&abort->start, NULL); - else if (abort->count == 3) { - struct timeval now; - gettimeofday(&now, NULL); - if (now.tv_sec <= abort->start.tv_sec+1) { - unsigned long args[] = { LHREQ_BREAK, 0 }; - /* Close the fd so Waker will know it has to - * exit. */ - close(waker_fds.pipe[1]); - /* Just in case Waker is blocked in BREAK, send - * unbreak now. */ - write(fd, args, sizeof(args)); - exit(2); - } - abort->count = 0; - } - } else - /* Any other key resets the abort counter. */ + * This is such a hack, but works surprisingly well. Each ^C has to + * be in a buffer by itself, so they can't be too fast. But we check + * that we get three within about a second, so they can't be too + * slow. */ + if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) { abort->count = 0; + return; + } - /* Everything went OK! */ - return true; + abort->count++; + if (abort->count == 1) + gettimeofday(&abort->start, NULL); + else if (abort->count == 3) { + struct timeval now; + gettimeofday(&now, NULL); + /* Kill all Launcher processes with SIGINT, like normal ^C */ + if (now.tv_sec <= abort->start.tv_sec+1) + kill(0, SIGINT); + abort->count = 0; + } } -/* Handling output for console is simple: we just get all the output buffers - * and write them to stdout. */ -static void handle_console_output(int fd, struct virtqueue *vq, bool timeout) +/* This is the routine which handles console output (ie. stdout). */ +static void console_output(struct virtqueue *vq) { unsigned int head, out, in; - int len; struct iovec iov[vq->vring.num]; - /* Keep getting output buffers from the Guest until we run out. */ - while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) { - if (in) - errx(1, "Input buffers in output queue?"); - len = writev(STDOUT_FILENO, iov, out); - add_used_and_trigger(fd, vq, head, len); + head = wait_for_vq_desc(vq, iov, &out, &in); + if (in) + errx(1, "Input buffers in console output queue?"); + while (!iov_empty(iov, out)) { + int len = writev(STDOUT_FILENO, iov, out); + if (len <= 0) + err(1, "Write to stdout gave %i", len); + iov_consume(iov, out, len); } -} - -/* This is called when we no longer want to hear about Guest changes to a - * virtqueue. This is more efficient in high-traffic cases, but it means we - * have to set a timer to check if any more changes have occurred. */ -static void block_vq(struct virtqueue *vq) -{ - struct itimerval itm; - - vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY; - vq->blocked = true; - - itm.it_interval.tv_sec = 0; - itm.it_interval.tv_usec = 0; - itm.it_value.tv_sec = 0; - itm.it_value.tv_usec = timeout_usec; - - setitimer(ITIMER_REAL, &itm, NULL); + add_used(vq, head, 0); } /* * The Network * * Handling output for network is also simple: we get all the output buffers - * and write them (ignoring the first element) to this device's file descriptor - * (/dev/net/tun). + * and write them to /dev/net/tun. */ -static void handle_net_output(int fd, struct virtqueue *vq, bool timeout) +struct net_info { + int tunfd; +}; + +static void net_output(struct virtqueue *vq) { - unsigned int head, out, in, num = 0; - int len; + struct net_info *net_info = vq->dev->priv; + unsigned int head, out, in; struct iovec iov[vq->vring.num]; - static int last_timeout_num; - - /* Keep getting output buffers from the Guest until we run out. */ - while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) { - if (in) - errx(1, "Input buffers in output queue?"); - len = writev(vq->dev->fd, iov, out); - if (len < 0) - err(1, "Writing network packet to tun"); - add_used_and_trigger(fd, vq, head, len); - num++; - } - /* Block further kicks and set up a timer if we saw anything. */ - if (!timeout && num) - block_vq(vq); - - /* We never quite know how long should we wait before we check the - * queue again for more packets. We start at 500 microseconds, and if - * we get fewer packets than last time, we assume we made the timeout - * too small and increase it by 10 microseconds. Otherwise, we drop it - * by one microsecond every time. It seems to work well enough. */ - if (timeout) { - if (num < last_timeout_num) - timeout_usec += 10; - else if (timeout_usec > 1) - timeout_usec--; - last_timeout_num = num; - } + head = wait_for_vq_desc(vq, iov, &out, &in); + if (in) + errx(1, "Input buffers in net output queue?"); + if (writev(net_info->tunfd, iov, out) < 0) + errx(1, "Write to tun failed?"); + add_used(vq, head, 0); +} + +/* Will reading from this file descriptor block? */ +static bool will_block(int fd) +{ + fd_set fdset; + struct timeval zero = { 0, 0 }; + FD_ZERO(&fdset); + FD_SET(fd, &fdset); + return select(fd+1, &fdset, NULL, NULL, &zero) != 1; } -/* This is where we handle a packet coming in from the tun device to our +/* This is where we handle packets coming in from the tun device to our * Guest. */ -static bool handle_tun_input(int fd, struct device *dev) +static void net_input(struct virtqueue *vq) { - unsigned int head, in_num, out_num; int len; - struct iovec iov[dev->vq->vring.num]; - - /* First we need a network buffer from the Guests's recv virtqueue. */ - head = get_vq_desc(dev->vq, iov, &out_num, &in_num); - if (head == dev->vq->vring.num) { - /* Now, it's expected that if we try to send a packet too - * early, the Guest won't be ready yet. Wait until the device - * status says it's ready. */ - /* FIXME: Actually want DRIVER_ACTIVE here. */ - - /* Now tell it we want to know if new things appear. */ - dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY; - wmb(); - - /* We'll turn this back on if input buffers are registered. */ - return false; - } else if (out_num) - errx(1, "Output buffers in network recv queue?"); - - /* Read the packet from the device directly into the Guest's buffer. */ - len = readv(dev->fd, iov, in_num); - if (len <= 0) - err(1, "reading network"); + unsigned int head, out, in; + struct iovec iov[vq->vring.num]; + struct net_info *net_info = vq->dev->priv; - /* Tell the Guest about the new packet. */ - add_used_and_trigger(fd, dev->vq, head, len); + head = wait_for_vq_desc(vq, iov, &out, &in); + if (out) + errx(1, "Output buffers in net input queue?"); - verbose("tun input packet len %i [%02x %02x] (%s)\n", len, - ((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1], - head != dev->vq->vring.num ? "sent" : "discarded"); + /* Deliver interrupt now, since we're about to sleep. */ + if (vq->pending_used && will_block(net_info->tunfd)) + trigger_irq(vq); - /* All good. */ - return true; + len = readv(net_info->tunfd, iov, in); + if (len <= 0) + err(1, "Failed to read from tun."); + add_used(vq, head, len); } -/*L:215 This is the callback attached to the network and console input - * virtqueues: it ensures we try again, in case we stopped console or net - * delivery because Guest didn't have any buffers. */ -static void enable_fd(int fd, struct virtqueue *vq, bool timeout) +/* This is the helper to create threads. */ +static int do_thread(void *_vq) { - add_device_fd(vq->dev->fd); - /* Snap the Waker out of its select loop. */ - write(waker_fds.pipe[1], "", 1); + struct virtqueue *vq = _vq; + + for (;;) + vq->service(vq); + return 0; } -static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout) +/* When a child dies, we kill our entire process group with SIGTERM. This + * also has the side effect that the shell restores the console for us! */ +static void kill_launcher(int signal) { - /* We don't need to know again when Guest refills receive buffer. */ - vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY; - enable_fd(fd, vq, timeout); + kill(0, SIGTERM); } -/* When the Guest tells us they updated the status field, we handle it. */ -static void update_device_status(struct device *dev) +static void reset_device(struct device *dev) { struct virtqueue *vq; - /* This is a reset. */ - if (dev->desc->status == 0) { - verbose("Resetting device %s\n", dev->name); + verbose("Resetting device %s\n", dev->name); - /* Clear any features they've acked. */ - memset(get_feature_bits(dev) + dev->desc->feature_len, 0, - dev->desc->feature_len); + /* Clear any features they've acked. */ + memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len); - /* Zero out the virtqueues. */ - for (vq = dev->vq; vq; vq = vq->next) { - memset(vq->vring.desc, 0, - vring_size(vq->config.num, LGUEST_VRING_ALIGN)); - lg_last_avail(vq) = 0; + /* We're going to be explicitly killing threads, so ignore them. */ + signal(SIGCHLD, SIG_IGN); + + /* Zero out the virtqueues, get rid of their threads */ + for (vq = dev->vq; vq; vq = vq->next) { + if (vq->thread != (pid_t)-1) { + kill(vq->thread, SIGTERM); + waitpid(vq->thread, NULL, 0); + vq->thread = (pid_t)-1; } - } else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) { + memset(vq->vring.desc, 0, + vring_size(vq->config.num, LGUEST_VRING_ALIGN)); + lg_last_avail(vq) = 0; + } + dev->running = false; + + /* Now we care if threads die. */ + signal(SIGCHLD, (void *)kill_launcher); +} + +static void create_thread(struct virtqueue *vq) +{ + /* Create stack for thread and run it. Since stack grows + * upwards, we point the stack pointer to the end of this + * region. */ + char *stack = malloc(32768); + unsigned long args[] = { LHREQ_EVENTFD, + vq->config.pfn*getpagesize(), 0 }; + + /* Create a zero-initialized eventfd. */ + vq->eventfd = eventfd(0, 0); + if (vq->eventfd < 0) + err(1, "Creating eventfd"); + args[2] = vq->eventfd; + + /* Attach an eventfd to this virtqueue: it will go off + * when the Guest does an LHCALL_NOTIFY for this vq. */ + if (write(lguest_fd, &args, sizeof(args)) != 0) + err(1, "Attaching eventfd"); + + /* CLONE_VM: because it has to access the Guest memory, and + * SIGCHLD so we get a signal if it dies. */ + vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq); + if (vq->thread == (pid_t)-1) + err(1, "Creating clone"); + /* We close our local copy, now the child has it. */ + close(vq->eventfd); +} + +static void start_device(struct device *dev) +{ + unsigned int i; + struct virtqueue *vq; + + verbose("Device %s OK: offered", dev->name); + for (i = 0; i < dev->feature_len; i++) + verbose(" %02x", get_feature_bits(dev)[i]); + verbose(", accepted"); + for (i = 0; i < dev->feature_len; i++) + verbose(" %02x", get_feature_bits(dev) + [dev->feature_len+i]); + + for (vq = dev->vq; vq; vq = vq->next) { + if (vq->service) + create_thread(vq); + } + dev->running = true; +} + +static void cleanup_devices(void) +{ + struct device *dev; + + for (dev = devices.dev; dev; dev = dev->next) + reset_device(dev); + + /* If we saved off the original terminal settings, restore them now. */ + if (orig_term.c_lflag & (ISIG|ICANON|ECHO)) + tcsetattr(STDIN_FILENO, TCSANOW, &orig_term); +} + +/* When the Guest tells us they updated the status field, we handle it. */ +static void update_device_status(struct device *dev) +{ + /* A zero status is a reset, otherwise it's a set of flags. */ + if (dev->desc->status == 0) + reset_device(dev); + else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) { warnx("Device %s configuration FAILED", dev->name); + if (dev->running) + reset_device(dev); } else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) { - unsigned int i; - - verbose("Device %s OK: offered", dev->name); - for (i = 0; i < dev->desc->feature_len; i++) - verbose(" %02x", get_feature_bits(dev)[i]); - verbose(", accepted"); - for (i = 0; i < dev->desc->feature_len; i++) - verbose(" %02x", get_feature_bits(dev) - [dev->desc->feature_len+i]); - - if (dev->ready) - dev->ready(dev); + if (!dev->running) + start_device(dev); } } /* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */ -static void handle_output(int fd, unsigned long addr) +static void handle_output(unsigned long addr) { struct device *i; - struct virtqueue *vq; - /* Check each device and virtqueue. */ + /* Check each device. */ for (i = devices.dev; i; i = i->next) { + struct virtqueue *vq; + /* Notifications to device descriptors update device status. */ if (from_guest_phys(addr) == i->desc) { update_device_status(i); return; } - /* Notifications to virtqueues mean output has occurred. */ + /* Devices *can* be used before status is set to DRIVER_OK. */ for (vq = i->vq; vq; vq = vq->next) { - if (vq->config.pfn != addr/getpagesize()) + if (addr != vq->config.pfn*getpagesize()) continue; - - /* Guest should acknowledge (and set features!) before - * using the device. */ - if (i->desc->status == 0) { - warnx("%s gave early output", i->name); - return; - } - - if (strcmp(vq->dev->name, "console") != 0) - verbose("Output to %s\n", vq->dev->name); - if (vq->handle_output) - vq->handle_output(fd, vq, false); + if (i->running) + errx(1, "Notification on running %s", i->name); + start_device(i); return; } } @@ -1049,71 +990,6 @@ static void handle_output(int fd, unsigned long addr) strnlen(from_guest_phys(addr), guest_limit - addr)); } -static void handle_timeout(int fd) -{ - char buf[32]; - struct device *i; - struct virtqueue *vq; - - /* Clear the pipe */ - read(timeoutpipe[0], buf, sizeof(buf)); - - /* Check each device and virtqueue: flush blocked ones. */ - for (i = devices.dev; i; i = i->next) { - for (vq = i->vq; vq; vq = vq->next) { - if (!vq->blocked) - continue; - - vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY; - vq->blocked = false; - if (vq->handle_output) - vq->handle_output(fd, vq, true); - } - } -} - -/* This is called when the Waker wakes us up: check for incoming file - * descriptors. */ -static void handle_input(int fd) -{ - /* select() wants a zeroed timeval to mean "don't wait". */ - struct timeval poll = { .tv_sec = 0, .tv_usec = 0 }; - - for (;;) { - struct device *i; - fd_set fds = devices.infds; - int num; - - num = select(devices.max_infd+1, &fds, NULL, NULL, &poll); - /* Could get interrupted */ - if (num < 0) - continue; - /* If nothing is ready, we're done. */ - if (num == 0) - break; - - /* Otherwise, call the device(s) which have readable file - * descriptors and a method of handling them. */ - for (i = devices.dev; i; i = i->next) { - if (i->handle_input && FD_ISSET(i->fd, &fds)) { - if (i->handle_input(fd, i)) - continue; - - /* If handle_input() returns false, it means we - * should no longer service it. Networking and - * console do this when there's no input - * buffers to deliver into. Console also uses - * it when it discovers that stdin is closed. */ - FD_CLR(i->fd, &devices.infds); - } - } - - /* Is this the timeout fd? */ - if (FD_ISSET(timeoutpipe[0], &fds)) - handle_timeout(fd); - } -} - /*L:190 * Device Setup * @@ -1129,8 +1005,8 @@ static void handle_input(int fd) static u8 *device_config(const struct device *dev) { return (void *)(dev->desc + 1) - + dev->desc->num_vq * sizeof(struct lguest_vqconfig) - + dev->desc->feature_len * 2; + + dev->num_vq * sizeof(struct lguest_vqconfig) + + dev->feature_len * 2; } /* This routine allocates a new "struct lguest_device_desc" from descriptor @@ -1159,7 +1035,7 @@ static struct lguest_device_desc *new_dev_desc(u16 type) /* Each device descriptor is followed by the description of its virtqueues. We * specify how many descriptors the virtqueue is to have. */ static void add_virtqueue(struct device *dev, unsigned int num_descs, - void (*handle_output)(int, struct virtqueue *, bool)) + void (*service)(struct virtqueue *)) { unsigned int pages; struct virtqueue **i, *vq = malloc(sizeof(*vq)); @@ -1174,8 +1050,8 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, vq->next = NULL; vq->last_avail_idx = 0; vq->dev = dev; - vq->inflight = 0; - vq->blocked = false; + vq->service = service; + vq->thread = (pid_t)-1; /* Initialize the configuration. */ vq->config.num = num_descs; @@ -1191,6 +1067,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, * yet, otherwise we'd be overwriting them. */ assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0); memcpy(device_config(dev), &vq->config, sizeof(vq->config)); + dev->num_vq++; dev->desc->num_vq++; verbose("Virtqueue page %#lx\n", to_guest_phys(p)); @@ -1199,15 +1076,6 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, * second. */ for (i = &dev->vq; *i; i = &(*i)->next); *i = vq; - - /* Set the routine to call when the Guest does something to this - * virtqueue. */ - vq->handle_output = handle_output; - - /* As an optimization, set the advisory "Don't Notify Me" flag if we - * don't have a handler */ - if (!handle_output) - vq->vring.used->flags = VRING_USED_F_NO_NOTIFY; } /* The first half of the feature bitmask is for us to advertise features. The @@ -1219,7 +1087,7 @@ static void add_feature(struct device *dev, unsigned bit) /* We can't extend the feature bits once we've added config bytes */ if (dev->desc->feature_len <= bit / CHAR_BIT) { assert(dev->desc->config_len == 0); - dev->desc->feature_len = (bit / CHAR_BIT) + 1; + dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1; } features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT)); @@ -1243,22 +1111,17 @@ static void set_config(struct device *dev, unsigned len, const void *conf) * calling new_dev_desc() to allocate the descriptor and device memory. * * See what I mean about userspace being boring? */ -static struct device *new_device(const char *name, u16 type, int fd, - bool (*handle_input)(int, struct device *)) +static struct device *new_device(const char *name, u16 type) { struct device *dev = malloc(sizeof(*dev)); /* Now we populate the fields one at a time. */ - dev->fd = fd; - /* If we have an input handler for this file descriptor, then we add it - * to the device_list's fdset and maxfd. */ - if (handle_input) - add_device_fd(dev->fd); dev->desc = new_dev_desc(type); - dev->handle_input = handle_input; dev->name = name; dev->vq = NULL; - dev->ready = NULL; + dev->feature_len = 0; + dev->num_vq = 0; + dev->running = false; /* Append to device list. Prepending to a single-linked list is * easier, but the user expects the devices to be arranged on the bus @@ -1286,13 +1149,10 @@ static void setup_console(void) * raw input stream to the Guest. */ term.c_lflag &= ~(ISIG|ICANON|ECHO); tcsetattr(STDIN_FILENO, TCSANOW, &term); - /* If we exit gracefully, the original settings will be - * restored so the user can see what they're typing. */ - atexit(restore_term); } - dev = new_device("console", VIRTIO_ID_CONSOLE, - STDIN_FILENO, handle_console_input); + dev = new_device("console", VIRTIO_ID_CONSOLE); + /* We store the console state in dev->priv, and initialize it. */ dev->priv = malloc(sizeof(struct console_abort)); ((struct console_abort *)dev->priv)->count = 0; @@ -1301,31 +1161,13 @@ static void setup_console(void) * they put something the input queue, we make sure we're listening to * stdin. When they put something in the output queue, we write it to * stdout. */ - add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd); - add_virtqueue(dev, VIRTQUEUE_NUM, handle_console_output); + add_virtqueue(dev, VIRTQUEUE_NUM, console_input); + add_virtqueue(dev, VIRTQUEUE_NUM, console_output); - verbose("device %u: console\n", devices.device_num++); + verbose("device %u: console\n", ++devices.device_num); } /*:*/ -static void timeout_alarm(int sig) -{ - write(timeoutpipe[1], "", 1); -} - -static void setup_timeout(void) -{ - if (pipe(timeoutpipe) != 0) - err(1, "Creating timeout pipe"); - - if (fcntl(timeoutpipe[1], F_SETFL, - fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0) - err(1, "Making timeout pipe nonblocking"); - - add_device_fd(timeoutpipe[0]); - signal(SIGALRM, timeout_alarm); -} - /*M:010 Inter-guest networking is an interesting area. Simplest is to have a * --sharenet= option which opens or creates a named pipe. This can be * used to send packets to another guest in a 1:1 manner. @@ -1447,21 +1289,23 @@ static int get_tun_device(char tapif[IFNAMSIZ]) static void setup_tun_net(char *arg) { struct device *dev; - int netfd, ipfd; + struct net_info *net_info = malloc(sizeof(*net_info)); + int ipfd; u32 ip = INADDR_ANY; bool bridging = false; char tapif[IFNAMSIZ], *p; struct virtio_net_config conf; - netfd = get_tun_device(tapif); + net_info->tunfd = get_tun_device(tapif); /* First we create a new network device. */ - dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input); + dev = new_device("net", VIRTIO_ID_NET); + dev->priv = net_info; /* Network devices need a receive and a send queue, just like * console. */ - add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd); - add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output); + add_virtqueue(dev, VIRTQUEUE_NUM, net_input); + add_virtqueue(dev, VIRTQUEUE_NUM, net_output); /* We need a socket to perform the magic network ioctls to bring up the * tap interface, connect to the bridge etc. Any socket will do! */ @@ -1502,6 +1346,8 @@ static void setup_tun_net(char *arg) add_feature(dev, VIRTIO_NET_F_HOST_TSO4); add_feature(dev, VIRTIO_NET_F_HOST_TSO6); add_feature(dev, VIRTIO_NET_F_HOST_ECN); + /* We handle indirect ring entries */ + add_feature(dev, VIRTIO_RING_F_INDIRECT_DESC); set_config(dev, sizeof(conf), &conf); /* We don't need the socket any more; setup is done. */ @@ -1550,20 +1396,18 @@ struct vblk_info * Remember that the block device is handled by a separate I/O thread. We head * straight into the core of that thread here: */ -static bool service_io(struct device *dev) +static void blk_request(struct virtqueue *vq) { - struct vblk_info *vblk = dev->priv; + struct vblk_info *vblk = vq->dev->priv; unsigned int head, out_num, in_num, wlen; int ret; u8 *in; struct virtio_blk_outhdr *out; - struct iovec iov[dev->vq->vring.num]; + struct iovec iov[vq->vring.num]; off64_t off; - /* See if there's a request waiting. If not, nothing to do. */ - head = get_vq_desc(dev->vq, iov, &out_num, &in_num); - if (head == dev->vq->vring.num) - return false; + /* Get the next request. */ + head = wait_for_vq_desc(vq, iov, &out_num, &in_num); /* Every block request should contain at least one output buffer * (detailing the location on disk and the type of request) and one @@ -1637,83 +1481,21 @@ static bool service_io(struct device *dev) if (out->type & VIRTIO_BLK_T_BARRIER) fdatasync(vblk->fd); - /* We can't trigger an IRQ, because we're not the Launcher. It does - * that when we tell it we're done. */ - add_used(dev->vq, head, wlen); - return true; -} - -/* This is the thread which actually services the I/O. */ -static int io_thread(void *_dev) -{ - struct device *dev = _dev; - struct vblk_info *vblk = dev->priv; - char c; - - /* Close other side of workpipe so we get 0 read when main dies. */ - close(vblk->workpipe[1]); - /* Close the other side of the done_fd pipe. */ - close(dev->fd); - - /* When this read fails, it means Launcher died, so we follow. */ - while (read(vblk->workpipe[0], &c, 1) == 1) { - /* We acknowledge each request immediately to reduce latency, - * rather than waiting until we've done them all. I haven't - * measured to see if it makes any difference. - * - * That would be an interesting test, wouldn't it? You could - * also try having more than one I/O thread. */ - while (service_io(dev)) - write(vblk->done_fd, &c, 1); - } - return 0; -} - -/* Now we've seen the I/O thread, we return to the Launcher to see what happens - * when that thread tells us it's completed some I/O. */ -static bool handle_io_finish(int fd, struct device *dev) -{ - char c; - - /* If the I/O thread died, presumably it printed the error, so we - * simply exit. */ - if (read(dev->fd, &c, 1) != 1) - exit(1); - - /* It did some work, so trigger the irq. */ - trigger_irq(fd, dev->vq); - return true; -} - -/* When the Guest submits some I/O, we just need to wake the I/O thread. */ -static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout) -{ - struct vblk_info *vblk = vq->dev->priv; - char c = 0; - - /* Wake up I/O thread and tell it to go to work! */ - if (write(vblk->workpipe[1], &c, 1) != 1) - /* Presumably it indicated why it died. */ - exit(1); + add_used(vq, head, wlen); } /*L:198 This actually sets up a virtual block device. */ static void setup_block_file(const char *filename) { - int p[2]; struct device *dev; struct vblk_info *vblk; - void *stack; struct virtio_blk_config conf; - /* This is the pipe the I/O thread will use to tell us I/O is done. */ - pipe(p); - /* The device responds to return from I/O thread. */ - dev = new_device("block", VIRTIO_ID_BLOCK, p[0], handle_io_finish); + dev = new_device("block", VIRTIO_ID_BLOCK); /* The device has one virtqueue, where the Guest places requests. */ - add_virtqueue(dev, VIRTQUEUE_NUM, handle_virtblk_output); + add_virtqueue(dev, VIRTQUEUE_NUM, blk_request); /* Allocate the room for our own bookkeeping */ vblk = dev->priv = malloc(sizeof(*vblk)); @@ -1735,49 +1517,29 @@ static void setup_block_file(const char *filename) set_config(dev, sizeof(conf), &conf); - /* The I/O thread writes to this end of the pipe when done. */ - vblk->done_fd = p[1]; - - /* This is the second pipe, which is how we tell the I/O thread about - * more work. */ - pipe(vblk->workpipe); - - /* Create stack for thread and run it. Since stack grows upwards, we - * point the stack pointer to the end of this region. */ - stack = malloc(32768); - /* SIGCHLD - We dont "wait" for our cloned thread, so prevent it from - * becoming a zombie. */ - if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1) - err(1, "Creating clone"); - - /* We don't need to keep the I/O thread's end of the pipes open. */ - close(vblk->done_fd); - close(vblk->workpipe[0]); - verbose("device %u: virtblock %llu sectors\n", - devices.device_num, le64_to_cpu(conf.capacity)); + ++devices.device_num, le64_to_cpu(conf.capacity)); } +struct rng_info { + int rfd; +}; + /* Our random number generator device reads from /dev/random into the Guest's * input buffers. The usual case is that the Guest doesn't want random numbers * and so has no buffers although /dev/random is still readable, whereas * console is the reverse. * * The same logic applies, however. */ -static bool handle_rng_input(int fd, struct device *dev) +static void rng_input(struct virtqueue *vq) { int len; unsigned int head, in_num, out_num, totlen = 0; - struct iovec iov[dev->vq->vring.num]; + struct rng_info *rng_info = vq->dev->priv; + struct iovec iov[vq->vring.num]; /* First we need a buffer from the Guests's virtqueue. */ - head = get_vq_desc(dev->vq, iov, &out_num, &in_num); - - /* If they're not ready for input, stop listening to this file - * descriptor. We'll start again once they add an input buffer. */ - if (head == dev->vq->vring.num) - return false; - + head = wait_for_vq_desc(vq, iov, &out_num, &in_num); if (out_num) errx(1, "Output buffers in rng?"); @@ -1785,7 +1547,7 @@ static bool handle_rng_input(int fd, struct device *dev) * it reads straight into the Guest's buffer. We loop to make sure we * fill it. */ while (!iov_empty(iov, in_num)) { - len = readv(dev->fd, iov, in_num); + len = readv(rng_info->rfd, iov, in_num); if (len <= 0) err(1, "Read from /dev/random gave %i", len); iov_consume(iov, in_num, len); @@ -1793,25 +1555,23 @@ static bool handle_rng_input(int fd, struct device *dev) } /* Tell the Guest about the new input. */ - add_used_and_trigger(fd, dev->vq, head, totlen); - - /* Everything went OK! */ - return true; + add_used(vq, head, totlen); } /* And this creates a "hardware" random number device for the Guest. */ static void setup_rng(void) { struct device *dev; - int fd; + struct rng_info *rng_info = malloc(sizeof(*rng_info)); - fd = open_or_die("/dev/random", O_RDONLY); + rng_info->rfd = open_or_die("/dev/random", O_RDONLY); /* The device responds to return from I/O thread. */ - dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input); + dev = new_device("rng", VIRTIO_ID_RNG); + dev->priv = rng_info; /* The device has one virtqueue, where the Guest places inbufs. */ - add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd); + add_virtqueue(dev, VIRTQUEUE_NUM, rng_input); verbose("device %u: rng\n", devices.device_num++); } @@ -1827,17 +1587,18 @@ static void __attribute__((noreturn)) restart_guest(void) for (i = 3; i < FD_SETSIZE; i++) close(i); - /* The exec automatically gets rid of the I/O and Waker threads. */ + /* Reset all the devices (kills all threads). */ + cleanup_devices(); + execv(main_args[0], main_args); err(1, "Could not exec %s", main_args[0]); } /*L:220 Finally we reach the core of the Launcher which runs the Guest, serves * its input and output, and finally, lays it to rest. */ -static void __attribute__((noreturn)) run_guest(int lguest_fd) +static void __attribute__((noreturn)) run_guest(void) { for (;;) { - unsigned long args[] = { LHREQ_BREAK, 0 }; unsigned long notify_addr; int readval; @@ -1848,8 +1609,7 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd) /* One unsigned long means the Guest did HCALL_NOTIFY */ if (readval == sizeof(notify_addr)) { verbose("Notify on address %#lx\n", notify_addr); - handle_output(lguest_fd, notify_addr); - continue; + handle_output(notify_addr); /* ENOENT means the Guest died. Reading tells us why. */ } else if (errno == ENOENT) { char reason[1024] = { 0 }; @@ -1858,19 +1618,9 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd) /* ERESTART means that we need to reboot the guest */ } else if (errno == ERESTART) { restart_guest(); - /* EAGAIN means a signal (timeout). - * Anything else means a bug or incompatible change. */ - } else if (errno != EAGAIN) + /* Anything else means a bug or incompatible change. */ + } else err(1, "Running guest failed"); - - /* Only service input on thread for CPU 0. */ - if (cpu_id != 0) - continue; - - /* Service input, then unset the BREAK to release the Waker. */ - handle_input(lguest_fd); - if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0) - err(1, "Resetting break"); } } /*L:240 @@ -1904,8 +1654,8 @@ int main(int argc, char *argv[]) /* Memory, top-level pagetable, code startpoint and size of the * (optional) initrd. */ unsigned long mem = 0, start, initrd_size = 0; - /* Two temporaries and the /dev/lguest file descriptor. */ - int i, c, lguest_fd; + /* Two temporaries. */ + int i, c; /* The boot information for the Guest. */ struct boot_params *boot; /* If they specify an initrd file to load. */ @@ -1913,18 +1663,10 @@ int main(int argc, char *argv[]) /* Save the args: we "reboot" by execing ourselves again. */ main_args = argv; - /* We don't "wait" for the children, so prevent them from becoming - * zombies. */ - signal(SIGCHLD, SIG_IGN); - /* First we initialize the device list. Since console and network - * device receive input from a file descriptor, we keep an fdset - * (infds) and the maximum fd number (max_infd) with the head of the - * list. We also keep a pointer to the last device. Finally, we keep - * the next interrupt number to use for devices (1: remember that 0 is - * used by the timer). */ - FD_ZERO(&devices.infds); - devices.max_infd = -1; + /* First we initialize the device list. We keep a pointer to the last + * device, and the next interrupt number to use for devices (1: + * remember that 0 is used by the timer). */ devices.lastdev = NULL; devices.next_irq = 1; @@ -1982,9 +1724,6 @@ int main(int argc, char *argv[]) /* We always have a console device */ setup_console(); - /* We can timeout waiting for Guest network transmit. */ - setup_timeout(); - /* Now we load the kernel */ start = load_kernel(open_or_die(argv[optind+1], O_RDONLY)); @@ -2023,15 +1762,16 @@ int main(int argc, char *argv[]) /* We tell the kernel to initialize the Guest: this returns the open * /dev/lguest file descriptor. */ - lguest_fd = tell_kernel(start); + tell_kernel(start); + + /* Ensure that we terminate if a child dies. */ + signal(SIGCHLD, kill_launcher); - /* We clone off a thread, which wakes the Launcher whenever one of the - * input file descriptors needs attention. We call this the Waker, and - * we'll cover it in a moment. */ - setup_waker(lguest_fd); + /* If we exit via err(), this kills all the threads, restores tty. */ + atexit(cleanup_devices); /* Finally, run the Guest. This doesn't return. */ - run_guest(lguest_fd); + run_guest(); } /*:*/ diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt index 28c7473..efb3a6a 100644 --- a/Documentation/lguest/lguest.txt +++ b/Documentation/lguest/lguest.txt @@ -37,7 +37,6 @@ Running Lguest: "Paravirtualized guest support" = Y "Lguest guest support" = Y "High Memory Support" = off/4GB - "PAE (Physical Address Extension) Support" = N "Alignment value to which kernel should be aligned" = 0x100000 (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and CONFIG_PHYSICAL_ALIGN=0x100000) diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt index 23045b8..300da4b 100644 --- a/Documentation/local_ops.txt +++ b/Documentation/local_ops.txt @@ -34,7 +34,7 @@ out of order wrt other memory writes by the owner CPU. It can be done by slightly modifying the standard atomic operations : only their UP variant must be kept. It typically means removing LOCK prefix (on -i386 and x86_64) and any SMP sychronization barrier. If the architecture does +i386 and x86_64) and any SMP synchronization barrier. If the architecture does not have a different behavior between SMP and UP, including asm-generic/local.h in your architecture's local.h is sufficient. diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index f5b7127..7f5809e 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -31,6 +31,7 @@ Contents: - Locking functions. - Interrupt disabling functions. + - Sleep and wake-up functions. - Miscellaneous functions. (*) Inter-CPU locking barrier effects. @@ -1217,6 +1218,132 @@ barriers are required in such a situation, they must be provided from some other means. +SLEEP AND WAKE-UP FUNCTIONS +--------------------------- + +Sleeping and waking on an event flagged in global data can be viewed as an +interaction between two pieces of data: the task state of the task waiting for +the event and the global data used to indicate the event. To make sure that +these appear to happen in the right order, the primitives to begin the process +of going to sleep, and the primitives to initiate a wake up imply certain +barriers. + +Firstly, the sleeper normally follows something like this sequence of events: + + for (;;) { + set_current_state(TASK_UNINTERRUPTIBLE); + if (event_indicated) + break; + schedule(); + } + +A general memory barrier is interpolated automatically by set_current_state() +after it has altered the task state: + + CPU 1 + =============================== + set_current_state(); + set_mb(); + STORE current->state + + LOAD event_indicated + +set_current_state() may be wrapped by: + + prepare_to_wait(); + prepare_to_wait_exclusive(); + +which therefore also imply a general memory barrier after setting the state. +The whole sequence above is available in various canned forms, all of which +interpolate the memory barrier in the right place: + + wait_event(); + wait_event_interruptible(); + wait_event_interruptible_exclusive(); + wait_event_interruptible_timeout(); + wait_event_killable(); + wait_event_timeout(); + wait_on_bit(); + wait_on_bit_lock(); + + +Secondly, code that performs a wake up normally follows something like this: + + event_indicated = 1; + wake_up(&event_wait_queue); + +or: + + event_indicated = 1; + wake_up_process(event_daemon); + +A write memory barrier is implied by wake_up() and co. if and only if they wake +something up. The barrier occurs before the task state is cleared, and so sits +between the STORE to indicate the event and the STORE to set TASK_RUNNING: + + CPU 1 CPU 2 + =============================== =============================== + set_current_state(); STORE event_indicated + set_mb(); wake_up(); + STORE current->state + STORE current->state + LOAD event_indicated + +The available waker functions include: + + complete(); + wake_up(); + wake_up_all(); + wake_up_bit(); + wake_up_interruptible(); + wake_up_interruptible_all(); + wake_up_interruptible_nr(); + wake_up_interruptible_poll(); + wake_up_interruptible_sync(); + wake_up_interruptible_sync_poll(); + wake_up_locked(); + wake_up_locked_poll(); + wake_up_nr(); + wake_up_poll(); + wake_up_process(); + + +[!] Note that the memory barriers implied by the sleeper and the waker do _not_ +order multiple stores before the wake-up with respect to loads of those stored +values after the sleeper has called set_current_state(). For instance, if the +sleeper does: + + set_current_state(TASK_INTERRUPTIBLE); + if (event_indicated) + break; + __set_current_state(TASK_RUNNING); + do_something(my_data); + +and the waker does: + + my_data = value; + event_indicated = 1; + wake_up(&event_wait_queue); + +there's no guarantee that the change to event_indicated will be perceived by +the sleeper as coming after the change to my_data. In such a circumstance, the +code on both sides must interpolate its own memory barriers between the +separate data accesses. Thus the above sleeper ought to do: + + set_current_state(TASK_INTERRUPTIBLE); + if (event_indicated) { + smp_rmb(); + do_something(my_data); + } + +and the waker should do: + + my_data = value; + smp_wmb(); + event_indicated = 1; + wake_up(&event_wait_queue); + + MISCELLANEOUS FUNCTIONS ----------------------- @@ -1366,7 +1493,7 @@ WHERE ARE MEMORY BARRIERS NEEDED? Under normal operation, memory operation reordering is generally not going to be a problem as a single-threaded linear piece of code will still appear to -work correctly, even if it's in an SMP kernel. There are, however, three +work correctly, even if it's in an SMP kernel. There are, however, four circumstances in which reordering definitely _could_ be a problem: (*) Interprocessor interaction. diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index 4c2ecf5..bbc8a6a 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt @@ -73,13 +73,13 @@ this phase is triggered automatically. ACPI can notify this event. If not, (see Section 4.). Logical Memory Hotplug phase is to change memory state into -avaiable/unavailable for users. Amount of memory from user's view is +available/unavailable for users. Amount of memory from user's view is changed by this phase. The kernel makes all memory in it as free pages when a memory range is available. In this document, this phase is described as online/offline. -Logical Memory Hotplug phase is triggred by write of sysfs file by system +Logical Memory Hotplug phase is triggered by write of sysfs file by system administrator. For the hot-add case, it must be executed after Physical Hotplug phase by hand. (However, if you writes udev's hotplug scripts for memory hotplug, these @@ -334,7 +334,7 @@ MEMORY_CANCEL_ONLINE Generated if MEMORY_GOING_ONLINE fails. MEMORY_ONLINE - Generated when memory has succesfully brought online. The callback may + Generated when memory has successfully brought online. The callback may allocate pages from the new memory. MEMORY_GOING_OFFLINE @@ -359,7 +359,7 @@ The third argument is passed by pointer of struct memory_notify. struct memory_notify { unsigned long start_pfn; unsigned long nr_pages; - int status_cahnge_nid; + int status_change_nid; } start_pfn is start_pfn of online/offline memory. diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt index 1fef1f0..d3507ba 100644 --- a/Documentation/mn10300/ABI.txt +++ b/Documentation/mn10300/ABI.txt @@ -26,7 +26,7 @@ registers and the stack. If the first argument is a 64-bit value, it will be passed in D0:D1. If the first argument is not a 64-bit value, but the second is, the second will be passed entirely on the stack and D1 will be unused. -Arguments smaller than 32-bits are not coelesced within a register or a stack +Arguments smaller than 32-bits are not coalesced within a register or a stack word. For example, two byte-sized arguments will always be passed in separate registers or word-sized stack slots. diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt index bdf93b7..274821b 100644 --- a/Documentation/mtd/nand_ecc.txt +++ b/Documentation/mtd/nand_ecc.txt @@ -50,7 +50,7 @@ byte 255: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp3 rp5 ... rp15 cp5 cp5 cp5 cp5 cp4 cp4 cp4 cp4 This figure represents a sector of 256 bytes. -cp is my abbreviaton for column parity, rp for row parity. +cp is my abbreviation for column parity, rp for row parity. Let's start to explain column parity. cp0 is the parity that belongs to all bit0, bit2, bit4, bit6. @@ -560,7 +560,7 @@ Measuring this code again showed big gain. When executing the original linux code 1 million times, this took about 1 second on my system. (using time to measure the performance). After this iteration I was back to 0.075 sec. Actually I had to decide to start measuring over 10 -million interations in order not to loose too much accuracy. This one +million iterations in order not to lose too much accuracy. This one definitely seemed to be the jackpot! There is a little bit more room for improvement though. There are three @@ -571,8 +571,8 @@ loop; This eliminates 3 statements per loop. Of course after the loop we need to correct by adding: rp4 ^= rp4_6; rp6 ^= rp4_6 -Furthermore there are 4 sequential assingments to rp8. This can be -encoded slightly more efficient by saving tmppar before those 4 lines +Furthermore there are 4 sequential assignments to rp8. This can be +encoded slightly more efficiently by saving tmppar before those 4 lines and later do rp8 = rp8 ^ tmppar ^ notrp8; (where notrp8 is the value of rp8 before those 4 lines). Again a use of the commutative property of xor. @@ -622,7 +622,7 @@ Not a big change, but every penny counts :-) Analysis 7 ========== -Acutally this made things worse. Not very much, but I don't want to move +Actually this made things worse. Not very much, but I don't want to move into the wrong direction. Maybe something to investigate later. Could have to do with caching again. @@ -642,7 +642,7 @@ Analysis 8 This makes things worse. Let's stick with attempt 6 and continue from there. Although it seems that the code within the loop cannot be optimised further there is still room to optimize the generation of the ecc codes. -We can simply calcualate the total parity. If this is 0 then rp4 = rp5 +We can simply calculate the total parity. If this is 0 then rp4 = rp5 etc. If the parity is 1, then rp4 = !rp5; But if rp4 = rp5 we do not need rp5 etc. We can just write the even bits in the result byte and then do something like diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 0876275..d5181ce 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -221,7 +221,7 @@ ad_select - Any slave's 802.3ad association state changes - - The bond's adminstrative state changes to up + - The bond's administrative state changes to up count or 2 @@ -369,7 +369,7 @@ fail_over_mac When this policy is used in conjuction with the mii monitor, devices which assert link up prior to being able to actually transmit and receive are particularly - susecptible to loss of the gratuitous ARP, and an + susceptible to loss of the gratuitous ARP, and an appropriate updelay setting may be required. follow or 2 @@ -1794,7 +1794,7 @@ target to query. generally referred to as "trunk failover." This is a feature of the switch that causes the link state of a particular switch port to be set down (or up) when the state of another switch port goes down (or up). -It's purpose is to propogate link failures from logically "exterior" ports +Its purpose is to propagate link failures from logically "exterior" ports to the logically "interior" ports that bonding is able to monitor via miimon. Availability and configuration for trunk failover varies by switch, but this can be a viable alternative to the ARP monitor when using diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 2035bc4..cd79735 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -36,10 +36,15 @@ This file contains 6.2 local loopback of sent frames 6.3 CAN controller hardware filters 6.4 The virtual CAN driver (vcan) - 6.5 currently supported CAN hardware - 6.6 todo + 6.5 The CAN network device driver interface + 6.5.1 Netlink interface to set/get devices properties + 6.5.2 Setting the CAN bit-timing + 6.5.3 Starting and stopping the CAN network device + 6.6 supported CAN hardware - 7 Credits + 7 Socket CAN resources + + 8 Credits ============================================================================ @@ -234,6 +239,8 @@ solution for a couple of reasons: the user application using the common CAN filter mechanisms. Inside this filter definition the (interested) type of errors may be selected. The reception of error frames is disabled by default. + The format of the CAN error frame is briefly decribed in the Linux + header file "include/linux/can/error.h". 4. How to use Socket CAN ------------------------ @@ -327,7 +334,7 @@ solution for a couple of reasons: return 1; } - /* paraniod check ... */ + /* paranoid check ... */ if (nbytes < sizeof(struct can_frame)) { fprintf(stderr, "read: incomplete CAN frame\n"); return 1; @@ -605,61 +612,213 @@ solution for a couple of reasons: removal of vcan network devices can be managed with the ip(8) tool: - Create a virtual CAN network interface: - ip link add type vcan + $ ip link add type vcan - Create a virtual CAN network interface with a specific name 'vcan42': - ip link add dev vcan42 type vcan + $ ip link add dev vcan42 type vcan - Remove a (virtual CAN) network interface 'vcan42': - ip link del vcan42 - - The tool 'vcan' from the SocketCAN SVN repository on BerliOS is obsolete. - - Virtual CAN network device creation in older Kernels: - In Linux Kernel versions < 2.6.24 the vcan driver creates 4 vcan - netdevices at module load time by default. This value can be changed - with the module parameter 'numdev'. E.g. 'modprobe vcan numdev=8' - - 6.5 currently supported CAN hardware + $ ip link del vcan42 + + 6.5 The CAN network device driver interface + + The CAN network device driver interface provides a generic interface + to setup, configure and monitor CAN network devices. The user can then + configure the CAN device, like setting the bit-timing parameters, via + the netlink interface using the program "ip" from the "IPROUTE2" + utility suite. The following chapter describes briefly how to use it. + Furthermore, the interface uses a common data structure and exports a + set of common functions, which all real CAN network device drivers + should use. Please have a look to the SJA1000 or MSCAN driver to + understand how to use them. The name of the module is can-dev.ko. + + 6.5.1 Netlink interface to set/get devices properties + + The CAN device must be configured via netlink interface. The supported + netlink message types are defined and briefly described in + "include/linux/can/netlink.h". CAN link support for the program "ip" + of the IPROUTE2 utility suite is avaiable and it can be used as shown + below: + + - Setting CAN device properties: + + $ ip link set can0 type can help + Usage: ip link set DEVICE type can + [ bitrate BITRATE [ sample-point SAMPLE-POINT] ] | + [ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1 + phase-seg2 PHASE-SEG2 [ sjw SJW ] ] + + [ loopback { on | off } ] + [ listen-only { on | off } ] + [ triple-sampling { on | off } ] + + [ restart-ms TIME-MS ] + [ restart ] + + Where: BITRATE := { 1..1000000 } + SAMPLE-POINT := { 0.000..0.999 } + TQ := { NUMBER } + PROP-SEG := { 1..8 } + PHASE-SEG1 := { 1..8 } + PHASE-SEG2 := { 1..8 } + SJW := { 1..4 } + RESTART-MS := { 0 | NUMBER } + + - Display CAN device details and statistics: + + $ ip -details -statistics link show can0 + 2: can0: mtu 16 qdisc pfifo_fast state UP qlen 10 + link/can + can state ERROR-ACTIVE restart-ms 100 + bitrate 125000 sample_point 0.875 + tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1 + sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 + clock 8000000 + re-started bus-errors arbit-lost error-warn error-pass bus-off + 41 17457 0 41 42 41 + RX: bytes packets errors dropped overrun mcast + 140859 17608 17457 0 0 0 + TX: bytes packets errors dropped carrier collsns + 861 112 0 41 0 0 + + More info to the above output: + + "" + Shows the list of selected CAN controller modes: LOOPBACK, + LISTEN-ONLY, or TRIPLE-SAMPLING. + + "state ERROR-ACTIVE" + The current state of the CAN controller: "ERROR-ACTIVE", + "ERROR-WARNING", "ERROR-PASSIVE", "BUS-OFF" or "STOPPED" + + "restart-ms 100" + Automatic restart delay time. If set to a non-zero value, a + restart of the CAN controller will be triggered automatically + in case of a bus-off condition after the specified delay time + in milliseconds. By default it's off. + + "bitrate 125000 sample_point 0.875" + Shows the real bit-rate in bits/sec and the sample-point in the + range 0.000..0.999. If the calculation of bit-timing parameters + is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the + bit-timing can be defined by setting the "bitrate" argument. + Optionally the "sample-point" can be specified. By default it's + 0.000 assuming CIA-recommended sample-points. + + "tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1" + Shows the time quanta in ns, propagation segment, phase buffer + segment 1 and 2 and the synchronisation jump width in units of + tq. They allow to define the CAN bit-timing in a hardware + independent format as proposed by the Bosch CAN 2.0 spec (see + chapter 8 of http://www.semiconductors.bosch.de/pdf/can2spec.pdf). + + "sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 + clock 8000000" + Shows the bit-timing constants of the CAN controller, here the + "sja1000". The minimum and maximum values of the time segment 1 + and 2, the synchronisation jump width in units of tq, the + bitrate pre-scaler and the CAN system clock frequency in Hz. + These constants could be used for user-defined (non-standard) + bit-timing calculation algorithms in user-space. + + "re-started bus-errors arbit-lost error-warn error-pass bus-off" + Shows the number of restarts, bus and arbitration lost errors, + and the state changes to the error-warning, error-passive and + bus-off state. RX overrun errors are listed in the "overrun" + field of the standard network statistics. + + 6.5.2 Setting the CAN bit-timing + + The CAN bit-timing parameters can always be defined in a hardware + independent format as proposed in the Bosch CAN 2.0 specification + specifying the arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" + and "sjw": + + $ ip link set canX type can tq 125 prop-seg 6 \ + phase-seg1 7 phase-seg2 2 sjw 1 + + If the kernel option CONFIG_CAN_CALC_BITTIMING is enabled, CIA + recommended CAN bit-timing parameters will be calculated if the bit- + rate is specified with the argument "bitrate": + + $ ip link set canX type can bitrate 125000 + + Note that this works fine for the most common CAN controllers with + standard bit-rates but may *fail* for exotic bit-rates or CAN system + clock frequencies. Disabling CONFIG_CAN_CALC_BITTIMING saves some + space and allows user-space tools to solely determine and set the + bit-timing parameters. The CAN controller specific bit-timing + constants can be used for that purpose. They are listed by the + following command: + + $ ip -details link show can0 + ... + sja1000: clock 8000000 tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 + + 6.5.3 Starting and stopping the CAN network device + + A CAN network device is started or stopped as usual with the command + "ifconfig canX up/down" or "ip link set canX up/down". Be aware that + you *must* define proper bit-timing parameters for real CAN devices + before you can start it to avoid error-prone default settings: + + $ ip link set canX up type can bitrate 125000 + + A device may enter the "bus-off" state if too much errors occurred on + the CAN bus. Then no more messages are received or sent. An automatic + bus-off recovery can be enabled by setting the "restart-ms" to a + non-zero value, e.g.: + + $ ip link set canX type can restart-ms 100 + + Alternatively, the application may realize the "bus-off" condition + by monitoring CAN error frames and do a restart when appropriate with + the command: + + $ ip link set canX type can restart + + Note that a restart will also create a CAN error frame (see also + chapter 3.4). - On the project website http://developer.berlios.de/projects/socketcan - there are different drivers available: + 6.6 Supported CAN hardware - vcan: Virtual CAN interface driver (if no real hardware is available) - sja1000: Philips SJA1000 CAN controller (recommended) - i82527: Intel i82527 CAN controller - mscan: Motorola/Freescale CAN controller (e.g. inside SOC MPC5200) - ccan: CCAN controller core (e.g. inside SOC h7202) - slcan: For a bunch of CAN adaptors that are attached via a - serial line ASCII protocol (for serial / USB adaptors) + Please check the "Kconfig" file in "drivers/net/can" to get an actual + list of the support CAN hardware. On the Socket CAN project website + (see chapter 7) there might be further drivers available, also for + older kernel versions. - Additionally the different CAN adaptors (ISA/PCI/PCMCIA/USB/Parport) - from PEAK Systemtechnik support the CAN netdevice driver model - since Linux driver v6.0: http://www.peak-system.com/linux/index.htm +7. Socket CAN resources +----------------------- - Please check the Mailing Lists on the berlios OSS project website. + You can find further resources for Socket CAN like user space tools, + support for old kernel versions, more drivers, mailing lists, etc. + at the BerliOS OSS project website for Socket CAN: - 6.6 todo + http://developer.berlios.de/projects/socketcan - The configuration interface for CAN network drivers is still an open - issue that has not been finalized in the socketcan project. Also the - idea of having a library module (candev.ko) that holds functions - that are needed by all CAN netdevices is not ready to ship. - Your contribution is welcome. + If you have questions, bug fixes, etc., don't hesitate to post them to + the Socketcan-Users mailing list. But please search the archives first. -7. Credits +8. Credits ---------- - Oliver Hartkopp (PF_CAN core, filters, drivers, bcm) + Oliver Hartkopp (PF_CAN core, filters, drivers, bcm, SJA1000 driver) Urs Thuermann (PF_CAN core, kernel integration, socket interfaces, raw, vcan) Jan Kizka (RT-SocketCAN core, Socket-API reconciliation) - Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews) + Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews, + CAN device driver interface, MSCAN driver) Robert Schwebel (design reviews, PTXdist integration) Marc Kleine-Budde (design reviews, Kernel 2.6 cleanups, drivers) Benedikt Spranger (reviews) Thomas Gleixner (LKML reviews, coding style, posting hints) - Andrey Volkov (kernel subtree structure, ioctls, mscan driver) + Andrey Volkov (kernel subtree structure, ioctls, MSCAN driver) Matthias Brukner (first SJA1000 CAN netdevice implementation Q2/2003) Klaus Hitschler (PEAK driver integration) Uwe Koppe (CAN netdevices with PF_PACKET approach) Michael Schulze (driver layer loopback requirement, RT CAN drivers review) + Pavel Pisa (Bit-timing calculation) + Sascha Hauer (SJA1000 platform driver) + Sebastian Haas (SJA1000 EMS PCI driver) + Markus Plessing (SJA1000 EMS PCI driver) + Per Dalen (SJA1000 Kvaser PCI driver) + Sam Ravnborg (reviews, coding style, kbuild help) diff --git a/Documentation/networking/dm9000.txt b/Documentation/networking/dm9000.txt index 65df3de..5552e2e 100644 --- a/Documentation/networking/dm9000.txt +++ b/Documentation/networking/dm9000.txt @@ -129,7 +129,7 @@ PHY Link state polling ---------------------- The driver keeps track of the link state and informs the network core -about link (carrier) availablilty. This is managed by several methods +about link (carrier) availability. This is managed by several methods depending on the version of the chip and on which PHY is being used. For the internal PHY, the original (and currently default) method is diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt new file mode 100644 index 0000000..a0280ad --- /dev/null +++ b/Documentation/networking/ieee802154.txt @@ -0,0 +1,76 @@ + + Linux IEEE 802.15.4 implementation + + +Introduction +============ + +The Linux-ZigBee project goal is to provide complete implementation +of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack +of protocols for organizing Low-Rate Wireless Personal Area Networks. + +Currently only IEEE 802.15.4 layer is implemented. We have choosen +to use plain Berkeley socket API, the generic Linux networking stack +to transfer IEEE 802.15.4 messages and a special protocol over genetlink +for configuration/management + + +Socket API +========== + +int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0); +..... + +The address family, socket addresses etc. are defined in the +include/net/ieee802154/af_ieee802154.h header or in the special header +in our userspace package (see either linux-zigbee sourceforge download page +or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee). + +One can use SOCK_RAW for passing raw data towards device xmit function. YMMV. + + +MLME - MAC Level Management +============================ + +Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands. +See the include/net/ieee802154/nl802154.h header. Our userspace tools package +(see above) provides CLI configuration utility for radio interfaces and simple +coordinator for IEEE 802.15.4 networks as an example users of MLME protocol. + + +Kernel side +============= + +Like with WiFi, there are several types of devices implementing IEEE 802.15.4. +1) 'HardMAC'. The MAC layer is implemented in the device itself, the device + exports MLME and data API. +2) 'SoftMAC' or just radio. These types of devices are just radio transceivers + possibly with some kinds of acceleration like automatic CRC computation and + comparation, automagic ACK handling, address matching, etc. + +Those types of devices require different approach to be hooked into Linux kernel. + + +HardMAC +======= + +See the header include/net/ieee802154/netdevice.h. You have to implement Linux +net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family +code via plain sk_buffs. The control block of sk_buffs will contain additional +info as described in the struct ieee802154_mac_cb. + +To hook the MLME interface you have to populate the ml_priv field of your +net_device with a pointer to struct ieee802154_mlme_ops instance. All fields are +required. + +We provide an example of simple HardMAC driver at drivers/ieee802154/fakehard.c + + +SoftMAC +======= + +We are going to provide intermediate layer impelementing IEEE 802.15.4 MAC +in software. This is currently WIP. + +See header include/net/ieee802154/mac802154.h and several drivers in +drivers/ieee802154/ diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index b121c5d..8be7623 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -168,7 +168,16 @@ tcp_dsack - BOOLEAN Allows TCP to send "duplicate" SACKs. tcp_ecn - BOOLEAN - Enable Explicit Congestion Notification in TCP. + Enable Explicit Congestion Notification (ECN) in TCP. ECN is only + used when both ends of the TCP flow support it. It is useful to + avoid losses due to congestion (when the bottleneck router supports + ECN). + Possible values are: + 0 disable ECN + 1 ECN enabled + 2 Only server-side ECN enabled. If the other end does + not support ECN, behavior is like with ECN disabled. + Default: 2 tcp_fack - BOOLEAN Enable FACK congestion avoidance and fast retransmission. @@ -1048,6 +1057,13 @@ disable_ipv6 - BOOLEAN address. Default: FALSE (enable IPv6 operation) + When this value is changed from 1 to 0 (IPv6 is being enabled), + it will dynamically create a link-local address on the given + interface and start Duplicate Address Detection, if necessary. + + When this value is changed from 0 to 1 (IPv6 is being disabled), + it will dynamically delete all address on the given interface. + accept_dad - INTEGER Whether to accept DAD (Duplicate Address Detection). 0: Disable DAD diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt index 268e5c1..9fd7e21 100644 --- a/Documentation/networking/ipv6.txt +++ b/Documentation/networking/ipv6.txt @@ -33,3 +33,40 @@ disable A reboot is required to enable IPv6. +autoconf + + Specifies whether to enable IPv6 address autoconfiguration + on all interfaces. This might be used when one does not wish + for addresses to be automatically generated from prefixes + received in Router Advertisements. + + The possible values and their effects are: + + 0 + IPv6 address autoconfiguration is disabled on all interfaces. + + Only the IPv6 loopback address (::1) and link-local addresses + will be added to interfaces. + + 1 + IPv6 address autoconfiguration is enabled on all interfaces. + + This is the default value. + +disable_ipv6 + + Specifies whether to disable IPv6 on all interfaces. + This might be used when no IPv6 addresses are desired. + + The possible values and their effects are: + + 0 + IPv6 is enabled on all interfaces. + + This is the default value. + + 1 + IPv6 is disabled on all interfaces. + + No IPv6 addresses will be added to interfaces. + diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt index 2451f55..63214b2 100644 --- a/Documentation/networking/l2tp.txt +++ b/Documentation/networking/l2tp.txt @@ -158,7 +158,7 @@ Sample Userspace Code } return 0; -Miscellanous +Miscellaneous ============ The PPPoL2TP driver was developed as part of the OpenL2TP project by diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt index 84906ef..b30e81a 100644 --- a/Documentation/networking/mac80211-injection.txt +++ b/Documentation/networking/mac80211-injection.txt @@ -12,38 +12,22 @@ following format: The radiotap format is discussed in ./Documentation/networking/radiotap-headers.txt. -Despite 13 radiotap argument types are currently defined, most only make sense +Despite many radiotap parameters being currently defined, most only make sense to appear on received packets. The following information is parsed from the radiotap headers and used to control injection: - * IEEE80211_RADIOTAP_RATE - - rate in 500kbps units, automatic if invalid or not present - - - * IEEE80211_RADIOTAP_ANTENNA - - antenna to use, automatic if not present - - - * IEEE80211_RADIOTAP_DBM_TX_POWER - - transmit power in dBm, automatic if not present - - * IEEE80211_RADIOTAP_FLAGS IEEE80211_RADIOTAP_F_FCS: FCS will be removed and recalculated IEEE80211_RADIOTAP_F_WEP: frame will be encrypted if key available IEEE80211_RADIOTAP_F_FRAG: frame will be fragmented if longer than the - current fragmentation threshold. Note that - this flag is only reliable when software - fragmentation is enabled) + current fragmentation threshold. + The injection code can also skip all other currently defined radiotap fields facilitating replay of captured radiotap headers directly. -Here is an example valid radiotap header defining these three parameters +Here is an example valid radiotap header defining some parameters 0x00, 0x00, // <-- radiotap version 0x0b, 0x00, // <- radiotap header length @@ -72,8 +56,8 @@ interface), along the following lines: ... r = pcap_inject(ppcap, u8aSendBuffer, nLength); -You can also find sources for a complete inject test applet here: +You can also find a link to a complete inject application here: -http://penumbra.warmcat.com/_twk/tiki-index.php?page=packetspammer +http://wireless.kernel.org/en/users/Documentation/packetspammer Andy Green diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt index a2ab6a0..87b3d15 100644 --- a/Documentation/networking/netdevices.txt +++ b/Documentation/networking/netdevices.txt @@ -74,7 +74,7 @@ dev->hard_start_xmit: for this and return NETDEV_TX_LOCKED when the spin lock fails. The locking there should also properly protect against set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated. - Dont use it for new drivers. + Don't use it for new drivers. Context: Process with BHs disabled or BH (timer), will be called with interrupts disabled by netconsole. diff --git a/Documentation/networking/operstates.txt b/Documentation/networking/operstates.txt index c9074f9..1a77a3c 100644 --- a/Documentation/networking/operstates.txt +++ b/Documentation/networking/operstates.txt @@ -38,9 +38,6 @@ ifinfomsg::if_flags & IFF_LOWER_UP: ifinfomsg::if_flags & IFF_DORMANT: Driver has signaled netif_dormant_on() -These interface flags can also be queried without netlink using the -SIOCGIFFLAGS ioctl. - TLV IFLA_OPERSTATE contains RFC2863 state of the interface in numeric representation: diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 07c53d5..a22fd85 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -4,16 +4,18 @@ This file documents the CONFIG_PACKET_MMAP option available with the PACKET socket interface on 2.4 and 2.6 kernels. This type of sockets is used for -capture network traffic with utilities like tcpdump or any other that uses -the libpcap library. - -You can find the latest version of this document at +capture network traffic with utilities like tcpdump or any other that needs +raw access to network interface. +You can find the latest version of this document at: http://pusa.uv.es/~ulisses/packet_mmap/ -Please send me your comments to +Howto can be found at: + http://wiki.gnu-log.net (packet_mmap) +Please send your comments to Ulisses Alonso Camaró + Johann Baudy ------------------------------------------------------------------------------- + Why use PACKET_MMAP @@ -25,19 +27,24 @@ to capture each packet, it requires two if you want to get packet's timestamp (like libpcap always does). In the other hand PACKET_MMAP is very efficient. PACKET_MMAP provides a size -configurable circular buffer mapped in user space. This way reading packets just -needs to wait for them, most of the time there is no need to issue a single -system call. By using a shared buffer between the kernel and the user -also has the benefit of minimizing packet copies. - -It's fine to use PACKET_MMAP to improve the performance of the capture process, -but it isn't everything. At least, if you are capturing at high speeds (this -is relative to the cpu speed), you should check if the device driver of your -network interface card supports some sort of interrupt load mitigation or -(even better) if it supports NAPI, also make sure it is enabled. +configurable circular buffer mapped in user space that can be used to either +send or receive packets. This way reading packets just needs to wait for them, +most of the time there is no need to issue a single system call. Concerning +transmission, multiple packets can be sent through one system call to get the +highest bandwidth. +By using a shared buffer between the kernel and the user also has the benefit +of minimizing packet copies. + +It's fine to use PACKET_MMAP to improve the performance of the capture and +transmission process, but it isn't everything. At least, if you are capturing +at high speeds (this is relative to the cpu speed), you should check if the +device driver of your network interface card supports some sort of interrupt +load mitigation or (even better) if it supports NAPI, also make sure it is +enabled. For transmission, check the MTU (Maximum Transmission Unit) used and +supported by devices of your network. -------------------------------------------------------------------------------- -+ How to use CONFIG_PACKET_MMAP ++ How to use CONFIG_PACKET_MMAP to improve capture process -------------------------------------------------------------------------------- From the user standpoint, you should use the higher level libpcap library, which @@ -57,7 +64,7 @@ the low level details or want to improve libpcap by including PACKET_MMAP support. -------------------------------------------------------------------------------- -+ How to use CONFIG_PACKET_MMAP directly ++ How to use CONFIG_PACKET_MMAP directly to improve capture process -------------------------------------------------------------------------------- From the system calls stand point, the use of PACKET_MMAP involves @@ -66,6 +73,7 @@ the following process: [setup] socket() -------> creation of the capture socket setsockopt() ---> allocation of the circular buffer (ring) + option: PACKET_RX_RING mmap() ---------> mapping of the allocated buffer to the user process @@ -97,13 +105,75 @@ also the mapping of the circular buffer in the user process and the use of this buffer. -------------------------------------------------------------------------------- ++ How to use CONFIG_PACKET_MMAP directly to improve transmission process +-------------------------------------------------------------------------------- +Transmission process is similar to capture as shown below. + +[setup] socket() -------> creation of the transmission socket + setsockopt() ---> allocation of the circular buffer (ring) + option: PACKET_TX_RING + bind() ---------> bind transmission socket with a network interface + mmap() ---------> mapping of the allocated buffer to the + user process + +[transmission] poll() ---------> wait for free packets (optional) + send() ---------> send all packets that are set as ready in + the ring + The flag MSG_DONTWAIT can be used to return + before end of transfer. + +[shutdown] close() --------> destruction of the transmission socket and + deallocation of all associated resources. + +Binding the socket to your network interface is mandatory (with zero copy) to +know the header size of frames used in the circular buffer. + +As capture, each frame contains two parts: + + -------------------- +| struct tpacket_hdr | Header. It contains the status of +| | of this frame +|--------------------| +| data buffer | +. . Data that will be sent over the network interface. +. . + -------------------- + + bind() associates the socket to your network interface thanks to + sll_ifindex parameter of struct sockaddr_ll. + + Initialization example: + + struct sockaddr_ll my_addr; + struct ifreq s_ifr; + ... + + strncpy (s_ifr.ifr_name, "eth0", sizeof(s_ifr.ifr_name)); + + /* get interface index of eth0 */ + ioctl(this->socket, SIOCGIFINDEX, &s_ifr); + + /* fill sockaddr_ll struct to prepare binding */ + my_addr.sll_family = AF_PACKET; + my_addr.sll_protocol = ETH_P_ALL; + my_addr.sll_ifindex = s_ifr.ifr_ifindex; + + /* bind socket to eth0 */ + bind(this->socket, (struct sockaddr *)&my_addr, sizeof(struct sockaddr_ll)); + + A complete tutorial is available at: http://wiki.gnu-log.net/ + +-------------------------------------------------------------------------------- + PACKET_MMAP settings -------------------------------------------------------------------------------- To setup PACKET_MMAP from user level code is done with a call like + - Capture process setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req)) + - Transmission process + setsockopt(fd, SOL_PACKET, PACKET_TX_RING, (void *) &req, sizeof(req)) The most significant argument in the previous call is the req parameter, this parameter must to have the following structure: @@ -117,11 +187,11 @@ this parameter must to have the following structure: }; This structure is defined in /usr/include/linux/if_packet.h and establishes a -circular buffer (ring) of unswappable memory mapped in the capture process. +circular buffer (ring) of unswappable memory. Being mapped in the capture process allows reading the captured frames and related meta-information like timestamps without requiring a system call. -Captured frames are grouped in blocks. Each block is a physically contiguous +Frames are grouped in blocks. Each block is a physically contiguous region of memory and holds tp_block_size/tp_frame_size frames. The total number of blocks is tp_block_nr. Note that tp_frame_nr is a redundant parameter because @@ -336,6 +406,7 @@ struct tpacket_hdr). If this field is 0 means that the frame is ready to be used for the kernel, If not, there is a frame the user can read and the following flags apply: ++++ Capture process: from include/linux/if_packet.h #define TP_STATUS_COPY 2 @@ -391,6 +462,37 @@ packets are in the ring: It doesn't incur in a race condition to first check the status value and then poll for frames. + +++ Transmission process +Those defines are also used for transmission: + + #define TP_STATUS_AVAILABLE 0 // Frame is available + #define TP_STATUS_SEND_REQUEST 1 // Frame will be sent on next send() + #define TP_STATUS_SENDING 2 // Frame is currently in transmission + #define TP_STATUS_WRONG_FORMAT 4 // Frame format is not correct + +First, the kernel initializes all frames to TP_STATUS_AVAILABLE. To send a +packet, the user fills a data buffer of an available frame, sets tp_len to +current data buffer size and sets its status field to TP_STATUS_SEND_REQUEST. +This can be done on multiple frames. Once the user is ready to transmit, it +calls send(). Then all buffers with status equal to TP_STATUS_SEND_REQUEST are +forwarded to the network device. The kernel updates each status of sent +frames with TP_STATUS_SENDING until the end of transfer. +At the end of each transfer, buffer status returns to TP_STATUS_AVAILABLE. + + header->tp_len = in_i_size; + header->tp_status = TP_STATUS_SEND_REQUEST; + retval = send(this->socket, NULL, 0, 0); + +The user can also use poll() to check if a buffer is available: +(status == TP_STATUS_SENDING) + + struct pollfd pfd; + pfd.fd = fd; + pfd.revents = 0; + pfd.events = POLLOUT; + retval = poll(&pfd, 1, timeout); + -------------------------------------------------------------------------------- + THANKS -------------------------------------------------------------------------------- diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt index 6a07e45..6e8ce09 100644 --- a/Documentation/networking/phonet.txt +++ b/Documentation/networking/phonet.txt @@ -36,7 +36,7 @@ Phonet packets have a common header as follows: On Linux, the link-layer header includes the pn_media byte (see below). The next 7 bytes are part of the network-layer header. -The device ID is split: the 6 higher-order bits consitute the device +The device ID is split: the 6 higher-order bits constitute the device address, while the 2 lower-order bits are used for multiplexing, as are the 8-bit object identifiers. As such, Phonet can be considered as a network layer with 6 bits of address space and 10 bits for transport diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index dcf3164..eaa1a25 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -89,7 +89,7 @@ added to this document when its support is enabled. Device drivers who provide their own built regulatory domain do not need a callback as the channels registered by them are the only ones that will be allowed and therefore *additional* -cannels cannot be enabled. +channels cannot be enabled. Example code - drivers hinting an alpha2: ------------------------------------------ diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 421e7d0..c9abbd8 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -75,9 +75,6 @@ may need to apply in domain-specific ways to their devices: struct bus_type { ... int (*suspend)(struct device *dev, pm_message_t state); - int (*suspend_late)(struct device *dev, pm_message_t state); - - int (*resume_early)(struct device *dev); int (*resume)(struct device *dev); }; @@ -226,20 +223,7 @@ The phases are seen by driver notifications issued in this order: This call should handle parts of device suspend logic that require sleeping. It probably does work to quiesce the device which hasn't - been abstracted into class.suspend() or bus.suspend_late(). - - 3 bus.suspend_late(dev, message) is called with IRQs disabled, and - with only one CPU active. Until the bus.resume_early() phase - completes (see later), IRQs are not enabled again. This method - won't be exposed by all busses; for message based busses like USB, - I2C, or SPI, device interactions normally require IRQs. This bus - call may be morphed into a driver call with bus-specific parameters. - - This call might save low level hardware state that might otherwise - be lost in the upcoming low power state, and actually put the - device into a low power state ... so that in some cases the device - may stay partly usable until this late. This "late" call may also - help when coping with hardware that behaves badly. + been abstracted into class.suspend(). The pm_message_t parameter is currently used to refine those semantics (described later). @@ -351,19 +335,11 @@ devices processing each phase's calls before the next phase begins. The phases are seen by driver notifications issued in this order: - 1 bus.resume_early(dev) is called with IRQs disabled, and with - only one CPU active. As with bus.suspend_late(), this method - won't be supported on busses that require IRQs in order to - interact with devices. - - This reverses the effects of bus.suspend_late(). - - 2 bus.resume(dev) is called next. This may be morphed into a device - driver call with bus-specific parameters; implementations may sleep. - - This reverses the effects of bus.suspend(). + 1 bus.resume(dev) reverses the effects of bus.suspend(). This may + be morphed into a device driver call with bus-specific parameters; + implementations may sleep. - 3 class.resume(dev) is called for devices associated with a class + 2 class.resume(dev) is called for devices associated with a class that has such a method. Implementations may sleep. This reverses the effects of class.suspend(), and would usually diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt index 82b7a43..5f83fd2 100644 --- a/Documentation/power/regulator/consumer.txt +++ b/Documentation/power/regulator/consumer.txt @@ -178,5 +178,5 @@ Consumers can uregister interest by calling :- int regulator_unregister_notifier(struct regulator *regulator, struct notifier_block *nb); -Regulators use the kernel notifier framework to send event to thier interested +Regulators use the kernel notifier framework to send event to their interested consumers. diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt index bdcb332..0cded69 100644 --- a/Documentation/power/regulator/overview.txt +++ b/Documentation/power/regulator/overview.txt @@ -119,7 +119,7 @@ Some terms used in this document:- battery power, USB power) Regulator Domains: is the new current limit within the - regulator operating parameters for input/ouput voltage. + regulator operating parameters for input/output voltage. If the regulator request passes all the constraint tests then the new regulator value is applied. diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt index 2ebdc60..514b94f 100644 --- a/Documentation/power/s2ram.txt +++ b/Documentation/power/s2ram.txt @@ -63,7 +63,7 @@ hardware during resume operations where a value can be set that will survive a reboot. Consequence is that after a resume (even if it is successful) your system -clock will have a value corresponding to the magic mumber instead of the +clock will have a value corresponding to the magic number instead of the correct date/time! It is therefore advisable to use a program like ntp-date or rdate to reset the correct date/time from an external time source when using this trace option. diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt index 7b99636..b967cd9 100644 --- a/Documentation/power/userland-swsusp.txt +++ b/Documentation/power/userland-swsusp.txt @@ -109,7 +109,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are still frozen when the device is being closed). Currently it is assumed that the userland utilities reading/writing the -snapshot image from/to the kernel will use a swap parition, called the resume +snapshot image from/to the kernel will use a swap partition, called the resume partition, or a swap file as storage space (if a swap file is used, the resume partition is the partition that holds this file). However, this is not really required, as they can use, for example, a special (blank) suspend partition or diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index d16b7a1..8d999d8 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1356,7 +1356,7 @@ platforms are moved over to use the flattened-device-tree model. - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY for, used if phy-address is absent. bit 0x00000001 is MDIO address 0. - For Axon it can be absent, thouugh my current driver + For Axon it can be absent, though my current driver doesn't handle phy-address yet so for now, keep 0x00ffffff in it. - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec @@ -1438,7 +1438,7 @@ platforms are moved over to use the flattened-device-tree model. The Xilinx EDK toolchain ships with a set of IP cores (devices) for use in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range - of standard device types (network, serial, etc.) and miscellanious + of standard device types (network, serial, etc.) and miscellaneous devices (gpio, LCD, spi, etc). Also, since these devices are implemented within the fpga fabric every instance of the device can be synthesised with different options that change the behaviour. diff --git a/Documentation/powerpc/dts-bindings/can/sja1000.txt b/Documentation/powerpc/dts-bindings/can/sja1000.txt new file mode 100644 index 0000000..d6d209d --- /dev/null +++ b/Documentation/powerpc/dts-bindings/can/sja1000.txt @@ -0,0 +1,53 @@ +Memory mapped SJA1000 CAN controller from NXP (formerly Philips) + +Required properties: + +- compatible : should be "nxp,sja1000". + +- reg : should specify the chip select, address offset and size required + to map the registers of the SJA1000. The size is usually 0x80. + +- interrupts: property with a value describing the interrupt source + (number and sensitivity) required for the SJA1000. + +Optional properties: + +- nxp,external-clock-frequency : Frequency of the external oscillator + clock in Hz. Note that the internal clock frequency used by the + SJA1000 is half of that value. If not specified, a default value + of 16000000 (16 MHz) is used. + +- nxp,tx-output-mode : operation mode of the TX output control logic: + <0x0> : bi-phase output mode + <0x1> : normal output mode (default) + <0x2> : test output mode + <0x3> : clock output mode + +- nxp,tx-output-config : TX output pin configuration: + <0x01> : TX0 invert + <0x02> : TX0 pull-down (default) + <0x04> : TX0 pull-up + <0x06> : TX0 push-pull + <0x08> : TX1 invert + <0x10> : TX1 pull-down + <0x20> : TX1 pull-up + <0x30> : TX1 push-pull + +- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin. + If not specified or if the specified value is 0, the CLKOUT pin + will be disabled. + +- nxp,no-comparator-bypass : Allows to disable the CAN input comperator. + +For futher information, please have a look to the SJA1000 data sheet. + +Examples: + +can@3,100 { + compatible = "nxp,sja1000"; + reg = <3 0x100 0x80>; + interrupts = <2 0>; + interrupt-parent = <&mpic>; + nxp,external-clock-frequency = <16000000>; +}; + diff --git a/Documentation/powerpc/dts-bindings/ecm.txt b/Documentation/powerpc/dts-bindings/ecm.txt new file mode 100644 index 0000000..f514f29 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/ecm.txt @@ -0,0 +1,64 @@ +===================================================================== +E500 LAW & Coherency Module Device Tree Binding +Copyright (C) 2009 Freescale Semiconductor Inc. +===================================================================== + +Local Access Window (LAW) Node + +The LAW node represents the region of CCSR space where local access +windows are configured. For ECM based devices this is the first 4k +of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some +number of local access windows as specified by fsl,num-laws. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,ecm-law" + + - reg + Usage: required + Value type: + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - fsl,num-laws + Usage: required + Value type: + Definition: The value specifies the number of local access + windows for this device. + +===================================================================== + +E500 Coherency Module Node + +The E500 LAW node represents the region of CCSR space where ECM config +and error reporting registers exist, this is the second 4k (0x1000) +of CCSR space. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where + CHIP is the processor (mpc8572, mpc8544, etc.) + + - reg + Usage: required + Value type: + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - interrupts + Usage: required + Value type: + + - interrupt-parent + Usage: required + Value type: + +===================================================================== diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt index 6c974d2..e8b5bc2 100644 --- a/Documentation/powerpc/dts-bindings/fsl/board.txt +++ b/Documentation/powerpc/dts-bindings/fsl/board.txt @@ -38,7 +38,7 @@ Required properities: - reg : Should contain the address and the length of the GPIO bank register. - #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional paramters (currently unused). + second cell is used to specify optional parameters (currently unused). - gpio-controller : Marks the port as GPIO controller. Example: diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt index 088fc47..160c752 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt @@ -19,7 +19,7 @@ Example: reg = <119c0 30>; } -* Properties common to mulitple CPM/QE devices +* Properties common to multiple CPM/QE devices - fsl,cpm-command : This value is ORed with the opcode and command flag to specify the device on which a CPM command operates. diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt index 1815dfe..349f79f 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt @@ -11,7 +11,7 @@ Required properties: "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d", "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank" - #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional paramters (currently unused). + second cell is used to specify optional parameters (currently unused). - gpio-controller : Marks the port as GPIO controller. Example of three SOC GPIO banks defined as gpio-controller nodes: diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt index 78790d5..6e37be1 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt @@ -17,6 +17,9 @@ Required properties: - model : precise model of the QE, Can be "QE", "CPM", or "CPM2" - reg : offset and length of the device registers. - bus-frequency : the clock frequency for QUICC Engine. +- fsl,qe-num-riscs: define how many RISC engines the QE has. +- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the + threads. Recommended properties - brg-frequency : the internal clock source frequency for baud-rate diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt index 6008465..5093ddf 100644 --- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt +++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt @@ -5,8 +5,7 @@ for MMC, SD, and SDIO types of memory cards. Required properties: - compatible : should be - "fsl,-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors. - "fsl,-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors. + "fsl,-esdhc", "fsl,esdhc" - reg : should contain eSDHC registers location and length. - interrupts : should contain eSDHC interrupt. - interrupt-parent : interrupt source phandle. @@ -15,7 +14,7 @@ Required properties: Example: sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; diff --git a/Documentation/powerpc/dts-bindings/fsl/mcm.txt b/Documentation/powerpc/dts-bindings/fsl/mcm.txt new file mode 100644 index 0000000..4ceda9b --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/mcm.txt @@ -0,0 +1,64 @@ +===================================================================== +MPX LAW & Coherency Module Device Tree Binding +Copyright (C) 2009 Freescale Semiconductor Inc. +===================================================================== + +Local Access Window (LAW) Node + +The LAW node represents the region of CCSR space where local access +windows are configured. For MCM based devices this is the first 4k +of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some +number of local access windows as specified by fsl,num-laws. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,mcm-law" + + - reg + Usage: required + Value type: + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - fsl,num-laws + Usage: required + Value type: + Definition: The value specifies the number of local access + windows for this device. + +===================================================================== + +MPX Coherency Module Node + +The MPX LAW node represents the region of CCSR space where MCM config +and error reporting registers exist, this is the second 4k (0x1000) +of CCSR space. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where + CHIP is the processor (mpc8641, mpc8610, etc.) + + - reg + Usage: required + Value type: + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - interrupts + Usage: required + Value type: + + - interrupt-parent + Usage: required + Value type: + +===================================================================== diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt index b26b919..bcc30ba 100644 --- a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt +++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt @@ -1,6 +1,6 @@ * Freescale MSI interrupt controller -Reguired properities: +Required properties: - compatible : compatible list, contains 2 entries, first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt index 02f6f43..07256b7 100644 --- a/Documentation/powerpc/dts-bindings/fsl/pmc.txt +++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt @@ -15,8 +15,8 @@ Properties: compatible; all statements below that apply to "fsl,mpc8548-pmc" also apply to "fsl,mpc8641d-pmc". - Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these - bit assigments are indicated via the sleep specifier in each device's + Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these + bit assignments are indicated via the sleep specifier in each device's sleep property. - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt index 06da4d4..2031ddb 100644 --- a/Documentation/powerpc/qe_firmware.txt +++ b/Documentation/powerpc/qe_firmware.txt @@ -225,7 +225,7 @@ For example, to match the 8323, revision 1.0: soc.major = 1 soc.minor = 0 -'padding' is neccessary for structure alignment. This field ensures that the +'padding' is necessary for structure alignment. This field ensures that the 'extended_modes' field is aligned on a 64-bit boundary. 'extended_modes' is a bitfield that defines special functionality which has an diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt index 7224459..aae8355 100644 --- a/Documentation/rbtree.txt +++ b/Documentation/rbtree.txt @@ -131,8 +131,8 @@ Example: } /* Add new node and rebalance tree. */ - rb_link_node(data->node, parent, new); - rb_insert_color(data->node, root); + rb_link_node(&data->node, parent, new); + rb_insert_color(&data->node, root); return TRUE; } @@ -146,10 +146,10 @@ To remove an existing node from a tree, call: Example: - struct mytype *data = mysearch(mytree, "walrus"); + struct mytype *data = mysearch(&mytree, "walrus"); if (data) { - rb_erase(data->node, mytree); + rb_erase(&data->node, &mytree); myfree(data); } @@ -188,5 +188,5 @@ Example: struct rb_node *node; for (node = rb_first(&mytree); node; node = rb_next(node)) - printk("key=%s\n", rb_entry(node, int, keystring)); + printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring); diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 4d3ee31..1b74b5f 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -1,575 +1,136 @@ -rfkill - RF switch subsystem support -==================================== +rfkill - RF kill switch support +=============================== -1 Introduction -2 Implementation details -3 Kernel driver guidelines -3.1 wireless device drivers -3.2 platform/switch drivers -3.3 input device drivers -4 Kernel API -5 Userspace support +1. Introduction +2. Implementation details +3. Kernel driver guidelines +4. Kernel API +5. Userspace support -1. Introduction: +1. Introduction -The rfkill switch subsystem exists to add a generic interface to circuitry that -can enable or disable the signal output of a wireless *transmitter* of any -type. By far, the most common use is to disable radio-frequency transmitters. +The rfkill subsystem provides a generic interface to disabling any radio +transmitter in the system. When a transmitter is blocked, it shall not +radiate any power. -Note that disabling the signal output means that the the transmitter is to be -made to not emit any energy when "blocked". rfkill is not about blocking data -transmissions, it is about blocking energy emission. +The subsystem also provides the ability to react on button presses and +disable all transmitters of a certain type (or all). This is intended for +situations where transmitters need to be turned off, for example on +aircraft. -The rfkill subsystem offers support for keys and switches often found on -laptops to enable wireless devices like WiFi and Bluetooth, so that these keys -and switches actually perform an action in all wireless devices of a given type -attached to the system. -The buttons to enable and disable the wireless transmitters are important in -situations where the user is for example using his laptop on a location where -radio-frequency transmitters _must_ be disabled (e.g. airplanes). -Because of this requirement, userspace support for the keys should not be made -mandatory. Because userspace might want to perform some additional smarter -tasks when the key is pressed, rfkill provides userspace the possibility to -take over the task to handle the key events. - -=============================================================================== -2: Implementation details +2. Implementation details The rfkill subsystem is composed of various components: the rfkill class, the rfkill-input module (an input layer handler), and some specific input layer events. -The rfkill class provides kernel drivers with an interface that allows them to -know when they should enable or disable a wireless network device transmitter. -This is enabled by the CONFIG_RFKILL Kconfig option. - -The rfkill class support makes sure userspace will be notified of all state -changes on rfkill devices through uevents. It provides a notification chain -for interested parties in the kernel to also get notified of rfkill state -changes in other drivers. It creates several sysfs entries which can be used -by userspace. See section "Userspace support". - -The rfkill-input module provides the kernel with the ability to implement a -basic response when the user presses a key or button (or toggles a switch) -related to rfkill functionality. It is an in-kernel implementation of default -policy of reacting to rfkill-related input events and neither mandatory nor -required for wireless drivers to operate. It is enabled by the -CONFIG_RFKILL_INPUT Kconfig option. - -rfkill-input is a rfkill-related events input layer handler. This handler will -listen to all rfkill key events and will change the rfkill state of the -wireless devices accordingly. With this option enabled userspace could either -do nothing or simply perform monitoring tasks. - -The rfkill-input module also provides EPO (emergency power-off) functionality -for all wireless transmitters. This function cannot be overridden, and it is -always active. rfkill EPO is related to *_RFKILL_ALL input layer events. - - -Important terms for the rfkill subsystem: - -In order to avoid confusion, we avoid the term "switch" in rfkill when it is -referring to an electronic control circuit that enables or disables a -transmitter. We reserve it for the physical device a human manipulates -(which is an input device, by the way): - -rfkill switch: - - A physical device a human manipulates. Its state can be perceived by - the kernel either directly (through a GPIO pin, ACPI GPE) or by its - effect on a rfkill line of a wireless device. - -rfkill controller: - - A hardware circuit that controls the state of a rfkill line, which a - kernel driver can interact with *to modify* that state (i.e. it has - either write-only or read/write access). - -rfkill line: - - An input channel (hardware or software) of a wireless device, which - causes a wireless transmitter to stop emitting energy (BLOCK) when it - is active. Point of view is extremely important here: rfkill lines are - always seen from the PoV of a wireless device (and its driver). - -soft rfkill line/software rfkill line: - - A rfkill line the wireless device driver can directly change the state - of. Related to rfkill_state RFKILL_STATE_SOFT_BLOCKED. - -hard rfkill line/hardware rfkill line: - - A rfkill line that works fully in hardware or firmware, and that cannot - be overridden by the kernel driver. The hardware device or the - firmware just exports its status to the driver, but it is read-only. - Related to rfkill_state RFKILL_STATE_HARD_BLOCKED. - -The enum rfkill_state describes the rfkill state of a transmitter: - -When a rfkill line or rfkill controller is in the RFKILL_STATE_UNBLOCKED state, -the wireless transmitter (radio TX circuit for example) is *enabled*. When the -it is in the RFKILL_STATE_SOFT_BLOCKED or RFKILL_STATE_HARD_BLOCKED, the -wireless transmitter is to be *blocked* from operating. - -RFKILL_STATE_SOFT_BLOCKED indicates that a call to toggle_radio() can change -that state. RFKILL_STATE_HARD_BLOCKED indicates that a call to toggle_radio() -will not be able to change the state and will return with a suitable error if -attempts are made to set the state to RFKILL_STATE_UNBLOCKED. - -RFKILL_STATE_HARD_BLOCKED is used by drivers to signal that the device is -locked in the BLOCKED state by a hardwire rfkill line (typically an input pin -that, when active, forces the transmitter to be disabled) which the driver -CANNOT override. - -Full rfkill functionality requires two different subsystems to cooperate: the -input layer and the rfkill class. The input layer issues *commands* to the -entire system requesting that devices registered to the rfkill class change -state. The way this interaction happens is not complex, but it is not obvious -either: - -Kernel Input layer: - - * Generates KEY_WWAN, KEY_WLAN, KEY_BLUETOOTH, SW_RFKILL_ALL, and - other such events when the user presses certain keys, buttons, or - toggles certain physical switches. - - THE INPUT LAYER IS NEVER USED TO PROPAGATE STATUS, NOTIFICATIONS OR THE - KIND OF STUFF AN ON-SCREEN-DISPLAY APPLICATION WOULD REPORT. It is - used to issue *commands* for the system to change behaviour, and these - commands may or may not be carried out by some kernel driver or - userspace application. It follows that doing user feedback based only - on input events is broken, as there is no guarantee that an input event - will be acted upon. - - Most wireless communication device drivers implementing rfkill - functionality MUST NOT generate these events, and have no reason to - register themselves with the input layer. Doing otherwise is a common - misconception. There is an API to propagate rfkill status change - information, and it is NOT the input layer. - -rfkill class: - - * Calls a hook in a driver to effectively change the wireless - transmitter state; - * Keeps track of the wireless transmitter state (with help from - the driver); - * Generates userspace notifications (uevents) and a call to a - notification chain (kernel) when there is a wireless transmitter - state change; - * Connects a wireless communications driver with the common rfkill - control system, which, for example, allows actions such as - "switch all bluetooth devices offline" to be carried out by - userspace or by rfkill-input. - - THE RFKILL CLASS NEVER ISSUES INPUT EVENTS. THE RFKILL CLASS DOES - NOT LISTEN TO INPUT EVENTS. NO DRIVER USING THE RFKILL CLASS SHALL - EVER LISTEN TO, OR ACT ON RFKILL INPUT EVENTS. Doing otherwise is - a layering violation. - - Most wireless data communication drivers in the kernel have just to - implement the rfkill class API to work properly. Interfacing to the - input layer is not often required (and is very often a *bug*) on - wireless drivers. - - Platform drivers often have to attach to the input layer to *issue* - (but never to listen to) rfkill events for rfkill switches, and also to - the rfkill class to export a control interface for the platform rfkill - controllers to the rfkill subsystem. This does NOT mean the rfkill - switch is attached to a rfkill class (doing so is almost always wrong). - It just means the same kernel module is the driver for different - devices (rfkill switches and rfkill controllers). - - -Userspace input handlers (uevents) or kernel input handlers (rfkill-input): - - * Implements the policy of what should happen when one of the input - layer events related to rfkill operation is received. - * Uses the sysfs interface (userspace) or private rfkill API calls - to tell the devices registered with the rfkill class to change - their state (i.e. translates the input layer event into real - action). - - * rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0 - (power off all transmitters) in a special way: it ignores any - overrides and local state cache and forces all transmitters to the - RFKILL_STATE_SOFT_BLOCKED state (including those which are already - supposed to be BLOCKED). - * rfkill EPO will remain active until rfkill-input receives an - EV_SW SW_RFKILL_ALL 1 event. While the EPO is active, transmitters - are locked in the blocked state (rfkill will refuse to unblock them). - * rfkill-input implements different policies that the user can - select for handling EV_SW SW_RFKILL_ALL 1. It will unlock rfkill, - and either do nothing (leave transmitters blocked, but now unlocked), - restore the transmitters to their state before the EPO, or unblock - them all. - -Userspace uevent handler or kernel platform-specific drivers hooked to the -rfkill notifier chain: - - * Taps into the rfkill notifier chain or to KOBJ_CHANGE uevents, - in order to know when a device that is registered with the rfkill - class changes state; - * Issues feedback notifications to the user; - * In the rare platforms where this is required, synthesizes an input - event to command all *OTHER* rfkill devices to also change their - statues when a specific rfkill device changes state. - - -=============================================================================== -3: Kernel driver guidelines - -Remember: point-of-view is everything for a driver that connects to the rfkill -subsystem. All the details below must be measured/perceived from the point of -view of the specific driver being modified. - -The first thing one needs to know is whether his driver should be talking to -the rfkill class or to the input layer. In rare cases (platform drivers), it -could happen that you need to do both, as platform drivers often handle a -variety of devices in the same driver. - -Do not mistake input devices for rfkill controllers. The only type of "rfkill -switch" device that is to be registered with the rfkill class are those -directly controlling the circuits that cause a wireless transmitter to stop -working (or the software equivalent of them), i.e. what we call a rfkill -controller. Every other kind of "rfkill switch" is just an input device and -MUST NOT be registered with the rfkill class. - -A driver should register a device with the rfkill class when ALL of the -following conditions are met (they define a rfkill controller): - -1. The device is/controls a data communications wireless transmitter; - -2. The kernel can interact with the hardware/firmware to CHANGE the wireless - transmitter state (block/unblock TX operation); - -3. The transmitter can be made to not emit any energy when "blocked": - rfkill is not about blocking data transmissions, it is about blocking - energy emission; - -A driver should register a device with the input subsystem to issue -rfkill-related events (KEY_WLAN, KEY_BLUETOOTH, KEY_WWAN, KEY_WIMAX, -SW_RFKILL_ALL, etc) when ALL of the folowing conditions are met: - -1. It is directly related to some physical device the user interacts with, to - command the O.S./firmware/hardware to enable/disable a data communications - wireless transmitter. - - Examples of the physical device are: buttons, keys and switches the user - will press/touch/slide/switch to enable or disable the wireless - communication device. - -2. It is NOT slaved to another device, i.e. there is no other device that - issues rfkill-related input events in preference to this one. - - Please refer to the corner cases and examples section for more details. - -When in doubt, do not issue input events. For drivers that should generate -input events in some platforms, but not in others (e.g. b43), the best solution -is to NEVER generate input events in the first place. That work should be -deferred to a platform-specific kernel module (which will know when to generate -events through the rfkill notifier chain) or to userspace. This avoids the -usual maintenance problems with DMI whitelisting. - - -Corner cases and examples: -==================================== - -1. If the device is an input device that, because of hardware or firmware, -causes wireless transmitters to be blocked regardless of the kernel's will, it -is still just an input device, and NOT to be registered with the rfkill class. - -2. If the wireless transmitter switch control is read-only, it is an input -device and not to be registered with the rfkill class (and maybe not to be made -an input layer event source either, see below). - -3. If there is some other device driver *closer* to the actual hardware the -user interacted with (the button/switch/key) to issue an input event, THAT is -the device driver that should be issuing input events. - -E.g: - [RFKILL slider switch] -- [GPIO hardware] -- [WLAN card rf-kill input] - (platform driver) (wireless card driver) - -The user is closer to the RFKILL slide switch plaform driver, so the driver -which must issue input events is the platform driver looking at the GPIO -hardware, and NEVER the wireless card driver (which is just a slave). It is -very likely that there are other leaves than just the WLAN card rf-kill input -(e.g. a bluetooth card, etc)... - -On the other hand, some embedded devices do this: - - [RFKILL slider switch] -- [WLAN card rf-kill input] - (wireless card driver) - -In this situation, the wireless card driver *could* register itself as an input -device and issue rf-kill related input events... but in order to AVOID the need -for DMI whitelisting, the wireless card driver does NOT do it. Userspace (HAL) -or a platform driver (that exists only on these embedded devices) will do the -dirty job of issuing the input events. - - -COMMON MISTAKES in kernel drivers, related to rfkill: -==================================== - -1. NEVER confuse input device keys and buttons with input device switches. - - 1a. Switches are always set or reset. They report the current state - (on position or off position). - - 1b. Keys and buttons are either in the pressed or not-pressed state, and - that's it. A "button" that latches down when you press it, and - unlatches when you press it again is in fact a switch as far as input - devices go. - -Add the SW_* events you need for switches, do NOT try to emulate a button using -KEY_* events just because there is no such SW_* event yet. Do NOT try to use, -for example, KEY_BLUETOOTH when you should be using SW_BLUETOOTH instead. - -2. Input device switches (sources of EV_SW events) DO store their current state -(so you *must* initialize it by issuing a gratuitous input layer event on -driver start-up and also when resuming from sleep), and that state CAN be -queried from userspace through IOCTLs. There is no sysfs interface for this, -but that doesn't mean you should break things trying to hook it to the rfkill -class to get a sysfs interface :-) - -3. Do not issue *_RFKILL_ALL events by default, unless you are sure it is the -correct event for your switch/button. These events are emergency power-off -events when they are trying to turn the transmitters off. An example of an -input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill -switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch. -An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by -default, is any sort of hot key that is type-specific (e.g. the one for WLAN). - - -3.1 Guidelines for wireless device drivers ------------------------------------------- - -(in this text, rfkill->foo means the foo field of struct rfkill). - -1. Each independent transmitter in a wireless device (usually there is only one -transmitter per device) should have a SINGLE rfkill class attached to it. - -2. If the device does not have any sort of hardware assistance to allow the -driver to rfkill the device, the driver should emulate it by taking all actions -required to silence the transmitter. - -3. If it is impossible to silence the transmitter (i.e. it still emits energy, -even if it is just in brief pulses, when there is no data to transmit and there -is no hardware support to turn it off) do NOT lie to the users. Do not attach -it to a rfkill class. The rfkill subsystem does not deal with data -transmission, it deals with energy emission. If the transmitter is emitting -energy, it is not blocked in rfkill terms. - -4. It doesn't matter if the device has multiple rfkill input lines affecting -the same transmitter, their combined state is to be exported as a single state -per transmitter (see rule 1). - -This rule exists because users of the rfkill subsystem expect to get (and set, -when possible) the overall transmitter rfkill state, not of a particular rfkill -line. - -5. The wireless device driver MUST NOT leave the transmitter enabled during -suspend and hibernation unless: +The rfkill class is provided for kernel drivers to register their radio +transmitter with the kernel, provide methods for turning it on and off and, +optionally, letting the system know about hardware-disabled states that may +be implemented on the device. This code is enabled with the CONFIG_RFKILL +Kconfig option, which drivers can "select". - 5.1. The transmitter has to be enabled for some sort of functionality - like wake-on-wireless-packet or autonomous packed forwarding in a mesh - network, and that functionality is enabled for this suspend/hibernation - cycle. +The rfkill class code also notifies userspace of state changes, this is +achieved via uevents. It also provides some sysfs files for userspace to +check the status of radio transmitters. See the "Userspace support" section +below. -AND - 5.2. The device was not on a user-requested BLOCKED state before - the suspend (i.e. the driver must NOT unblock a device, not even - to support wake-on-wireless-packet or remain in the mesh). +The rfkill-input code implements a basic response to rfkill buttons -- it +implements turning on/off all devices of a certain class (or all). -In other words, there is absolutely no allowed scenario where a driver can -automatically take action to unblock a rfkill controller (obviously, this deals -with scenarios where soft-blocking or both soft and hard blocking is happening. -Scenarios where hardware rfkill lines are the only ones blocking the -transmitter are outside of this rule, since the wireless device driver does not -control its input hardware rfkill lines in the first place). +When the device is hard-blocked (either by a call to rfkill_set_hw_state() +or from query_hw_block) set_block() will be invoked but drivers can well +ignore the method call since they can use the return value of the function +rfkill_set_hw_state() to sync the software state instead of keeping track +of calls to set_block(). -6. During resume, rfkill will try to restore its previous state. -7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio -until it is resumed. +The entire functionality is spread over more than one subsystem: + * The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and + SW_RFKILL_ALL -- when the user presses a button. Drivers for radio + transmitters generally do not register to the input layer, unless the + device really provides an input device (i.e. a button that has no + effect other than generating a button press event) -Example of a WLAN wireless driver connected to the rfkill subsystem: --------------------------------------------------------------------- + * The rfkill-input code hooks up to these events and switches the soft-block + of the various radio transmitters, depending on the button type. -A certain WLAN card has one input pin that causes it to block the transmitter -and makes the status of that input pin available (only for reading!) to the -kernel driver. This is a hard rfkill input line (it cannot be overridden by -the kernel driver). + * The rfkill drivers turn off/on their transmitters as requested. -The card also has one PCI register that, if manipulated by the driver, causes -it to block the transmitter. This is a soft rfkill input line. + * The rfkill class will generate userspace notifications (uevents) to tell + userspace what the current state is. -It has also a thermal protection circuitry that shuts down its transmitter if -the card overheats, and makes the status of that protection available (only for -reading!) to the kernel driver. This is also a hard rfkill input line. -If either one of these rfkill lines are active, the transmitter is blocked by -the hardware and forced offline. -The driver should allocate and attach to its struct device *ONE* instance of -the rfkill class (there is only one transmitter). +3. Kernel driver guidelines -It can implement the get_state() hook, and return RFKILL_STATE_HARD_BLOCKED if -either one of its two hard rfkill input lines are active. If the two hard -rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft -rfkill input line is active. Only if none of the rfkill input lines are -active, will it return RFKILL_STATE_UNBLOCKED. -Since the device has a hardware rfkill line, it IS subject to state changes -external to rfkill. Therefore, the driver must make sure that it calls -rfkill_force_state() to keep the status always up-to-date, and it must do a -rfkill_force_state() on resume from sleep. +Drivers for radio transmitters normally implement only the rfkill class. +These drivers may not unblock the transmitter based on own decisions, they +should act on information provided by the rfkill class only. -Every time the driver gets a notification from the card that one of its rfkill -lines changed state (polling might be needed on badly designed cards that don't -generate interrupts for such events), it recomputes the rfkill state as per -above, and calls rfkill_force_state() to update it. +Platform drivers might implement input devices if the rfkill button is just +that, a button. If that button influences the hardware then you need to +implement an rfkill class instead. This also applies if the platform provides +a way to turn on/off the transmitter(s). -The driver should implement the toggle_radio() hook, that: +During suspend/hibernation, transmitters should only be left enabled when +wake-on wlan or similar functionality requires it and the device wasn't +blocked before suspend/hibernate. Note that it may be necessary to update +the rfkill subsystem's idea of what the current state is at resume time if +the state may have changed over suspend. -1. Returns an error if one of the hardware rfkill lines are active, and the -caller asked for RFKILL_STATE_UNBLOCKED. -2. Activates the soft rfkill line if the caller asked for state -RFKILL_STATE_SOFT_BLOCKED. It should do this even if one of the hard rfkill -lines are active, effectively double-blocking the transmitter. -3. Deactivates the soft rfkill line if none of the hardware rfkill lines are -active and the caller asked for RFKILL_STATE_UNBLOCKED. - -=============================================================================== -4: Kernel API +4. Kernel API To build a driver with rfkill subsystem support, the driver should depend on -(or select) the Kconfig symbol RFKILL; it should _not_ depend on RKFILL_INPUT. +(or select) the Kconfig symbol RFKILL. The hardware the driver talks to may be write-only (where the current state of the hardware is unknown), or read-write (where the hardware can be queried about its current state). -The rfkill class will call the get_state hook of a device every time it needs -to know the *real* current state of the hardware. This can happen often, but -it does not do any polling, so it is not enough on hardware that is subject -to state changes outside of the rfkill subsystem. - -Therefore, calling rfkill_force_state() when a state change happens is -mandatory when the device has a hardware rfkill line, or when something else -like the firmware could cause its state to be changed without going through the -rfkill class. - -Some hardware provides events when its status changes. In these cases, it is -best for the driver to not provide a get_state hook, and instead register the -rfkill class *already* with the correct status, and keep it updated using -rfkill_force_state() when it gets an event from the hardware. - -rfkill_force_state() must be used on the device resume handlers to update the -rfkill status, should there be any chance of the device status changing during -the sleep. - -There is no provision for a statically-allocated rfkill struct. You must -use rfkill_allocate() to allocate one. - -You should: - - rfkill_allocate() - - modify rfkill fields (flags, name) - - modify state to the current hardware state (THIS IS THE ONLY TIME - YOU CAN ACCESS state DIRECTLY) - - rfkill_register() - -The only way to set a device to the RFKILL_STATE_HARD_BLOCKED state is through -a suitable return of get_state() or through rfkill_force_state(). +Calling rfkill_set_hw_state() when a state change happens is required from +rfkill drivers that control devices that can be hard-blocked unless they also +assign the poll_hw_block() callback (then the rfkill core will poll the +device). Don't do this unless you cannot get the event in any other way. -When a device is in the RFKILL_STATE_HARD_BLOCKED state, the only way to switch -it to a different state is through a suitable return of get_state() or through -rfkill_force_state(). -If toggle_radio() is called to set a device to state RFKILL_STATE_SOFT_BLOCKED -when that device is already at the RFKILL_STATE_HARD_BLOCKED state, it should -not return an error. Instead, it should try to double-block the transmitter, -so that its state will change from RFKILL_STATE_HARD_BLOCKED to -RFKILL_STATE_SOFT_BLOCKED should the hardware blocking cease. - -Please refer to the source for more documentation. - -=============================================================================== -5: Userspace support - -rfkill devices issue uevents (with an action of "change"), with the following -environment variables set: - -RFKILL_NAME -RFKILL_STATE -RFKILL_TYPE -The ABI for these variables is defined by the sysfs attributes. It is best -to take a quick look at the source to make sure of the possible values. +5. Userspace support -It is expected that HAL will trap those, and bridge them to DBUS, etc. These -events CAN and SHOULD be used to give feedback to the user about the rfkill -status of the system. - -Input devices may issue events that are related to rfkill. These are the -various KEY_* events and SW_* events supported by rfkill-input.c. - -******IMPORTANT****** -When rfkill-input is ACTIVE, userspace is NOT TO CHANGE THE STATE OF AN RFKILL -SWITCH IN RESPONSE TO AN INPUT EVENT also handled by rfkill-input, unless it -has set to true the user_claim attribute for that particular switch. This rule -is *absolute*; do NOT violate it. -******IMPORTANT****** - -Userspace must not assume it is the only source of control for rfkill switches. -Their state CAN and WILL change due to firmware actions, direct user actions, -and the rfkill-input EPO override for *_RFKILL_ALL. - -When rfkill-input is not active, userspace must initiate a rfkill status -change by writing to the "state" attribute in order for anything to happen. - -Take particular care to implement EV_SW SW_RFKILL_ALL properly. When that -switch is set to OFF, *every* rfkill device *MUST* be immediately put into the -RFKILL_STATE_SOFT_BLOCKED state, no questions asked. - -The following sysfs entries will be created: +The following sysfs entries exist for every rfkill device: name: Name assigned by driver to this key (interface or driver name). type: Name of the key type ("wlan", "bluetooth", etc). state: Current state of the transmitter 0: RFKILL_STATE_SOFT_BLOCKED - transmitter is forced off, but one can override it - by a write to the state attribute; + transmitter is turned off by software 1: RFKILL_STATE_UNBLOCKED - transmiter is NOT forced off, and may operate if - all other conditions for such operation are met - (such as interface is up and configured, etc); + transmitter is (potentially) active 2: RFKILL_STATE_HARD_BLOCKED transmitter is forced off by something outside of - the driver's control. One cannot set a device to - this state through writes to the state attribute; - claim: 1: Userspace handles events, 0: Kernel handles events - -Both the "state" and "claim" entries are also writable. For the "state" entry -this means that when 1 or 0 is written, the device rfkill state (if not yet in -the requested state), will be will be toggled accordingly. - -For the "claim" entry writing 1 to it means that the kernel no longer handles -key events even though RFKILL_INPUT input was enabled. When "claim" has been -set to 0, userspace should make sure that it listens for the input events or -check the sysfs "state" entry regularly to correctly perform the required tasks -when the rkfill key is pressed. - -A note about input devices and EV_SW events: - -In order to know the current state of an input device switch (like -SW_RFKILL_ALL), you will need to use an IOCTL. That information is not -available through sysfs in a generic way at this time, and it is not available -through the rfkill class AT ALL. + the driver's control. + claim: 0: Kernel handles events (currently always reads that value) + +rfkill devices also issue uevents (with an action of "change"), with the +following environment variables set: + +RFKILL_NAME +RFKILL_STATE +RFKILL_TYPE + +The contents of these variables corresponds to the "name", "state" and +"type" sysfs files explained above. + +An alternative userspace interface exists as a misc device /dev/rfkill, +which allows userspace to obtain and set the state of rfkill devices and +sets of devices. It also notifies userspace about device addition and +removal. The API is a simple read/write API that is defined in +linux/rfkill.h. diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index 10711d9..1eb576a 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -1984,7 +1984,7 @@ break *$pc break *0x400618 -heres a really useful one for large programs +Here's a really useful one for large programs rbr Set a breakpoint for all functions matching REGEXP e.g. @@ -2211,7 +2211,7 @@ Breakpoint 2 at 0x4d87a4: file top.c, line 2609. #5 0x51692c in readline_internal () at readline.c:521 #6 0x5164fe in readline (prompt=0x7ffff810 "\177ÂÿÂøx\177ÂÿÂ÷ÂØ\177ÂÿÂøxÂÀ") at readline.c:349 -#7 0x4d7a8a in command_line_input (prrompt=0x564420 "(gdb) ", repeat=1, +#7 0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1, annotation_suffix=0x4d6b44 "prompt") at top.c:2091 #8 0x4d6cf0 in command_loop () at top.c:1345 #9 0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635 diff --git a/Documentation/scheduler/sched-nice-design.txt b/Documentation/scheduler/sched-nice-design.txt index e2bae5a..3ac1e46 100644 --- a/Documentation/scheduler/sched-nice-design.txt +++ b/Documentation/scheduler/sched-nice-design.txt @@ -55,7 +55,7 @@ To sum it up: we always wanted to make nice levels more consistent, but within the constraints of HZ and jiffies and their nasty design level coupling to timeslices and granularity it was not really viable. -The second (less frequent but still periodically occuring) complaint +The second (less frequent but still periodically occurring) complaint about Linux's nice level support was its assymetry around the origo (which you can see demonstrated in the picture above), or more accurately: the fact that nice level behavior depended on the _absolute_ diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt index 5ba4d3f..1df7f9c 100644 --- a/Documentation/scheduler/sched-rt-group.txt +++ b/Documentation/scheduler/sched-rt-group.txt @@ -4,6 +4,7 @@ CONTENTS ======== +0. WARNING 1. Overview 1.1 The problem 1.2 The solution @@ -14,6 +15,23 @@ CONTENTS 3. Future plans +0. WARNING +========== + + Fiddling with these settings can result in an unstable system, the knobs are + root only and assumes root knows what he is doing. + +Most notable: + + * very small values in sched_rt_period_us can result in an unstable + system when the period is smaller than either the available hrtimer + resolution, or the time it takes to handle the budget refresh itself. + + * very small values in sched_rt_runtime_us can result in an unstable + system when the runtime is so small the system has difficulty making + forward progress (NOTE: the migration thread and kstopmachine both + are real-time processes). + 1. Overview =========== @@ -169,7 +187,7 @@ get their allocated time. Implementing SCHED_EDF might take a while to complete. Priority Inheritance is the biggest challenge as the current linux PI infrastructure is geared towards -the limited static priority levels 0-139. With deadline scheduling you need to +the limited static priority levels 0-99. With deadline scheduling you need to do deadline inheritance (since priority is inversely proportional to the deadline delta (deadline - now). diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt index 683ccae..c014ecc 100644 --- a/Documentation/scsi/aic79xx.txt +++ b/Documentation/scsi/aic79xx.txt @@ -194,7 +194,7 @@ The following information is available in this file: - Packetized SCSI Protocol at 160MB/s and 320MB/s - Quick Arbitration Selection (QAS) - Retained Training Information (Rev B. ASIC only) - - Interrupt Coalessing + - Interrupt Coalescing - Initiator Mode (target mode not currently supported) - Support for the PCI-X standard up to 133MHz diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index 230e308..08e2b4d 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -206,7 +206,7 @@ of MOVE MEMORY instructions. The 896 and the 895A allows handling of the phase mismatch context from SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor until the C code has saved the context of the transfer). -Implementing this without using LOAD/STORE instructions would be painfull +Implementing this without using LOAD/STORE instructions would be painful and I didn't even want to try it. The 896 chip supports 64 bit PCI transactions and addressing, while the @@ -240,7 +240,7 @@ characteristics. This feature may also reduce average command latency. In order to really gain advantage of this feature, devices must have a reasonable cache size (No miracle is to be expected for a low-end hard disk with 128 KB or less). -Some kown SCSI devices do not properly support tagged command queuing. +Some known SCSI devices do not properly support tagged command queuing. Generally, firmware revisions that fix this kind of problems are available at respective vendor web/ftp sites. All I can say is that the hard disks I use on my machines behave well with diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt index 49ea5c5..eb9a7b9 100644 --- a/Documentation/scsi/sym53c8xx_2.txt +++ b/Documentation/scsi/sym53c8xx_2.txt @@ -206,7 +206,7 @@ characteristics. This feature may also reduce average command latency. In order to really gain advantage of this feature, devices must have a reasonable cache size (No miracle is to be expected for a low-end hard disk with 128 KB or less). -Some kown old SCSI devices do not properly support tagged command queuing. +Some known old SCSI devices do not properly support tagged command queuing. Generally, firmware revisions that fix this kind of problems are available at respective vendor web/ftp sites. All I can say is that I never have had problem with tagged queuing using diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 012858d..4252697 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -460,6 +460,25 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-ctxfi + ---------------- + + Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips) + * Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series + * Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series + * Creative Sound Blaster X-Fi Titanium Professional Audio + * Creative Sound Blaster X-Fi Titanium + * Creative Sound Blaster X-Fi Elite Pro + * Creative Sound Blaster X-Fi Platinum + * Creative Sound Blaster X-Fi Fatal1ty + * Creative Sound Blaster X-Fi XtremeGamer + * Creative Sound Blaster X-Fi XtremeMusic + + reference_rate - reference sample rate, 44100 or 48000 (default) + multiple - multiple to ref. sample rate, 1 or 2 (default) + + This module supports multiple cards. + Module snd-darla20 ------------------ @@ -754,7 +773,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. single_cmd - Use single immediate commands to communicate with codecs (for debugging only) enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) - power_save - Automatic power-saving timtout (in second, 0 = + power_save - Automatic power-saving timeout (in second, 0 = disable) power_save_controller - Reset HD-audio controller in power-saving mode (default = on) @@ -925,6 +944,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * Onkyo SE-90PCI * Onkyo SE-200PCI * ESI Juli@ + * ESI Maya44 * Hercules Fortissimo IV * EGO-SYS WaveTerminal 192M @@ -933,7 +953,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192, juli, aureon51, aureon71, universe, ap192, k8x800, phase22, phase28, ms300, av710, se200pci, se90pci, - fortissimo4, sn25p, WT192M + fortissimo4, sn25p, WT192M, maya44 This module supports multiple cards and autoprobe. @@ -1093,6 +1113,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports multiple cards. The driver requires the firmware loader support on kernel. + Module snd-lx6464es + ------------------- + + Module for Digigram LX6464ES boards + + This module supports multiple cards. + Module snd-maestro3 ------------------- @@ -1543,13 +1570,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-sc6000 ----------------- - Module for Gallant SC-6000 soundcard. + Module for Gallant SC-6000 soundcard and later models: SC-6600 + and SC-7000. port - Port # (0x220 or 0x240) mss_port - MSS Port # (0x530 or 0xe80) irq - IRQ # (5,7,9,10,11) mpu_irq - MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq dma - DMA # (1,3,0) + joystick - Enable gameport - 0 = disable (default), 1 = enable This module supports multiple cards. @@ -1859,7 +1888,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ------------------- Module for sound cards based on the Asus AV100/AV200 chips, - i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX. + i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST + (Deluxe) and Essence STX. This module supports autoprobe and multiple cards. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 322869f..de8e10a 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -36,6 +36,7 @@ ALC260 acer Acer TravelMate will Will laptops (PB V7900) replacer Replacer 672V + favorit100 Maxdata Favorit 100XS basic fixed pin assignment (old default model) test for testing/debugging purpose, almost all controls can adjusted. Appearing only when compiled with @@ -85,10 +86,11 @@ ALC269 eeepc-p703 ASUS Eeepc P703 P900A eeepc-p901 ASUS Eeepc P901 S101 fujitsu FSC Amilo + lifebook Fujitsu Lifebook S6420 auto auto-config reading BIOS (default) -ALC662/663 -========== +ALC662/663/272 +============== 3stack-dig 3-stack (2-channel) with SPDIF 3stack-6ch 3-stack (6-channel) 3stack-6ch-dig 3-stack (6-channel) with SPDIF @@ -107,6 +109,9 @@ ALC662/663 asus-mode4 ASUS asus-mode5 ASUS asus-mode6 ASUS + dell Dell with ALC272 + dell-zm1 Dell ZM1 with ALC272 + samsung-nc10 Samsung NC10 mini notebook auto auto-config reading BIOS (default) ALC882/885 @@ -118,6 +123,7 @@ ALC882/885 asus-a7j ASUS A7J asus-a7m ASUS A7M macpro MacPro support + mb5 Macbook 5,1 mbp3 Macbook Pro rev3 imac24 iMac 24'' with jack detection w2jc ASUS W2JC @@ -133,10 +139,12 @@ ALC883/888 acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) acer-aspire Acer Aspire 9810 acer-aspire-4930g Acer Aspire 4930G + acer-aspire-8930g Acer Aspire 8930G medion Medion Laptops medion-md2 Medion MD2 targa-dig Targa/MSI - targa-2ch-dig Targs/MSI with 2-channel + targa-2ch-dig Targa/MSI with 2-channel + targa-8ch-dig Targa/MSI with 8-channel (MSI GX620) laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE) lenovo-101e Lenovo 101E lenovo-nb0763 Lenovo NB0763 @@ -150,6 +158,9 @@ ALC883/888 fujitsu-pi2515 Fujitsu AMILO Pi2515 fujitsu-xa3530 Fujitsu AMILO XA3530 3stack-6ch-intel Intel DG33* boards + asus-p5q ASUS P5Q-EM boards + mb31 MacBook 3,1 + sony-vaio-tt Sony VAIO TT auto auto-config reading BIOS (default) ALC861/660 @@ -348,6 +359,7 @@ STAC92HD71B* hp-m4 HP mini 1000 hp-dv5 HP dv series hp-hdx HP HDX series + hp-dv4-1222nr HP dv4-1222nr (with LED support) auto BIOS setup (default) STAC92HD73* diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 88b7433..71ac995 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -16,7 +16,7 @@ methods for the HD-audio hardware. The HD-audio component consists of two parts: the controller chip and the codec chips on the HD-audio bus. Linux provides a single driver for all controllers, snd-hda-intel. Although the driver name contains -a word of a well-known harware vendor, it's not specific to it but for +a word of a well-known hardware vendor, it's not specific to it but for all controller chips by other companies. Since the HD-audio controllers are supposed to be compatible, the single snd-hda-driver should work in most cases. But, not surprisingly, there are known diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index cfac20c..381908d 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -88,26 +88,34 @@ card*/pcm*/info substreams, etc. card*/pcm*/xrun_debug - This file appears when CONFIG_SND_DEBUG=y. - This shows the status of xrun (= buffer overrun/xrun) debug of - ALSA PCM middle layer, as an integer from 0 to 2. The value - can be changed by writing to this file, such as - - # cat 2 > /proc/asound/card0/pcm0p/xrun_debug - - When this value is greater than 0, the driver will show the - messages to kernel log when an xrun is detected. The debug - message is shown also when the invalid H/W pointer is detected - at the update of periods (usually called from the interrupt + This file appears when CONFIG_SND_DEBUG=y and + CONFIG_PCM_XRUN_DEBUG=y. + This shows the status of xrun (= buffer overrun/xrun) and + invalid PCM position debug/check of ALSA PCM middle layer. + It takes an integer value, can be changed by writing to this + file, such as + + # cat 5 > /proc/asound/card0/pcm0p/xrun_debug + + The value consists of the following bit flags: + bit 0 = Enable XRUN/jiffies debug messages + bit 1 = Show stack trace at XRUN / jiffies check + bit 2 = Enable additional jiffies check + + When the bit 0 is set, the driver will show the messages to + kernel log when an xrun is detected. The debug message is + shown also when the invalid H/W pointer is detected at the + update of periods (usually called from the interrupt handler). - When this value is greater than 1, the driver will show the - stack trace additionally. This may help the debugging. + When the bit 1 is set, the driver will show the stack trace + additionally. This may help the debugging. - Since 2.6.30, this option also enables the hwptr check using + Since 2.6.30, this option can enable the hwptr check using jiffies. This detects spontaneous invalid pointer callback values, but can be lead to too much corrections for a (mostly buggy) hardware that doesn't give smooth pointer updates. + This feature is enabled via the bit 2. card*/pcm*/sub*/info The general information of this PCM sub-stream. diff --git a/Documentation/sound/alsa/README.maya44 b/Documentation/sound/alsa/README.maya44 new file mode 100644 index 0000000..0e41576 --- /dev/null +++ b/Documentation/sound/alsa/README.maya44 @@ -0,0 +1,163 @@ +NOTE: The following is the original document of Rainer's patch that the +current maya44 code based on. Some contents might be obsoleted, but I +keep here as reference -- tiwai + +---------------------------------------------------------------- + +STATE OF DEVELOPMENT: + +This driver is being developed on the initiative of Piotr Makowski (oponek@gmail.com) and financed by Lars Bergmann. +Development is carried out by Rainer Zimmermann (mail@lightshed.de). + +ESI provided a sample Maya44 card for the development work. + +However, unfortunately it has turned out difficult to get detailed programming information, so I (Rainer Zimmermann) had to find out some card-specific information by experiment and conjecture. Some information (in particular, several GPIO bits) is still missing. + +This is the first testing version of the Maya44 driver released to the alsa-devel mailing list (Feb 5, 2008). + + +The following functions work, as tested by Rainer Zimmermann and Piotr Makowski: + +- playback and capture at all sampling rates +- input/output level +- crossmixing +- line/mic switch +- phantom power switch +- analogue monitor a.k.a bypass + + +The following functions *should* work, but are not fully tested: + +- Channel 3+4 analogue - S/PDIF input switching +- S/PDIF output +- all inputs/outputs on the M/IO/DIO extension card +- internal/external clock selection + + +*In particular, we would appreciate testing of these functions by anyone who has access to an M/IO/DIO extension card.* + + +Things that do not seem to work: + +- The level meters ("multi track") in 'alsamixer' do not seem to react to signals in (if this is a bug, it would probably be in the existing ICE1724 code). + +- Ardour 2.1 seems to work only via JACK, not using ALSA directly or via OSS. This still needs to be tracked down. + + +DRIVER DETAILS: + +the following files were added: + +pci/ice1724/maya44.c - Maya44 specific code +pci/ice1724/maya44.h +pci/ice1724/ice1724.patch +pci/ice1724/ice1724.h.patch - PROPOSED patch to ice1724.h (see SAMPLING RATES) +i2c/other/wm8776.c - low-level access routines for Wolfson WM8776 codecs +include/wm8776.h + + +Note that the wm8776.c code is meant to be card-independent and does not actually register the codec with the ALSA infrastructure. +This is done in maya44.c, mainly because some of the WM8776 controls are used in Maya44-specific ways, and should be named appropriately. + + +the following files were created in pci/ice1724, simply #including the corresponding file from the alsa-kernel tree: + +wtm.h +vt1720_mobo.h +revo.h +prodigy192.h +pontis.h +phase.h +maya44.h +juli.h +aureon.h +amp.h +envy24ht.h +se.h +prodigy_hifi.h + + +*I hope this is the correct way to do things.* + + +SAMPLING RATES: + +The Maya44 card (or more exactly, the Wolfson WM8776 codecs) allow a maximum sampling rate of 192 kHz for playback and 92 kHz for capture. + +As the ICE1724 chip only allows one global sampling rate, this is handled as follows: + +* setting the sampling rate on any open PCM device on the maya44 card will always set the *global* sampling rate for all playback and capture channels. + +* In the current state of the driver, setting rates of up to 192 kHz is permitted even for capture devices. + +*AVOID CAPTURING AT RATES ABOVE 96kHz*, even though it may appear to work. The codec cannot actually capture at such rates, meaning poor quality. + + +I propose some additional code for limiting the sampling rate when setting on a capture pcm device. However because of the global sampling rate, this logic would be somewhat problematic. + +The proposed code (currently deactivated) is in ice1712.h.patch, ice1724.c and maya44.c (in pci/ice1712). + + +SOUND DEVICES: + +PCM devices correspond to inputs/outputs as follows (assuming Maya44 is card #0): + +hw:0,0 input - stereo, analog input 1+2 +hw:0,0 output - stereo, analog output 1+2 +hw:0,1 input - stereo, analog input 3+4 OR S/PDIF input +hw:0,1 output - stereo, analog output 3+4 (and SPDIF out) + + +NAMING OF MIXER CONTROLS: + +(for more information about the signal flow, please refer to the block diagram on p.24 of the ESI Maya44 manual, or in the ESI windows software). + + +PCM: (digital) output level for channel 1+2 +PCM 1: same for channel 3+4 + +Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on input 1/2. + Make sure this is not turned on while any other source is connected to input 1/2. + It might damage the source and/or the maya44 card. + +Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo). + +Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver. +Bypass 1: same for channel 3+4. + +Crossmix: cross-mixer from channels 1+2 to channels 3+4 +Crossmix 1: cross-mixer from channels 3+4 to channels 1+2 + +IEC958 Output: switch for S/PDIF output. + This is not supported by the ESI windows driver. + S/PDIF should output the same signal as channel 3+4. [untested!] + + +Digitial output selectors: + + These switches allow a direct digital routing from the ADCs to the DACs. + Each switch determines where the digital input data to one of the DACs comes from. + They are not supported by the ESI windows driver. + For normal operation, they should all be set to "PCM out". + +H/W: Output source channel 1 +H/W 1: Output source channel 2 +H/W 2: Output source channel 3 +H/W 3: Output source channel 4 + +H/W 4 ... H/W 9: unknown function, left in to enable testing. + Possibly some of these control S/PDIF output(s). + If these turn out to be unused, they will go away in later driver versions. + +Selectable values for each of the digital output selectors are: + "PCM out" -> DAC output of the corresponding channel (default setting) + "Input 1"... + "Input 4" -> direct routing from ADC output of the selected input channel + + +-------- + +Feb 14, 2008 +Rainer Zimmermann +mail@lightshed.de + diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt index 34e87ec..de8efbc 100644 --- a/Documentation/sound/alsa/hda_codec.txt +++ b/Documentation/sound/alsa/hda_codec.txt @@ -114,7 +114,7 @@ For writing a sequence of verbs, use snd_hda_sequence_write(). There are variants of cached read/write, snd_hda_codec_write_cache(), snd_hda_sequence_write_cache(). These are used for recording the -register states for the power-mangement resume. When no PM is needed, +register states for the power-management resume. When no PM is needed, these are equivalent with non-cached version. To retrieve the number of sub nodes connected to the given node, use diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index 9e67632..9ac842b 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -62,6 +62,7 @@ Audio DAPM widgets fall into a number of types:- o Mic - Mic (and optional Jack) o Line - Line Input/Output (and optional Jack) o Speaker - Speaker + o Supply - Power or clock supply widget used by other widgets. o Pre - Special PRE widget (exec before all others) o Post - Special POST widget (exec after all others) diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index f11ca79..322a00b 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -32,6 +32,7 @@ show up in /proc/sys/kernel: - kstack_depth_to_print [ X86 only ] - l2cr [ PPC only ] - modprobe ==> Documentation/debugging-modules.txt +- modules_disabled - msgmax - msgmnb - msgmni @@ -184,6 +185,16 @@ kernel stack. ============================================================== +modules_disabled: + +A toggle value indicating if modules are allowed to be loaded +in an otherwise modular kernel. This toggle defaults to off +(0), but can be set true (1). Once true, modules can be +neither loaded nor unloaded, and the toggle cannot be set back +to false. + +============================================================== + osrelease, ostype & version: # cat osrelease diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index c302ddf..6fab2dc 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -358,7 +358,7 @@ nr_pdflush_threads The current number of pdflush threads. This value is read-only. The value changes according to the number of dirty pages in the system. -When neccessary, additional pdflush threads are created, one per second, up to +When necessary, additional pdflush threads are created, one per second, up to nr_pdflush_threads_max. ============================================================== @@ -565,7 +565,7 @@ swappiness This control is used to define how aggressive the kernel will swap memory pages. Higher values will increase agressiveness, lower values -descrease the amount of swap. +decrease the amount of swap. The default value is 60. diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt index e7c09ab..04763a3 100644 --- a/Documentation/timers/hpet.txt +++ b/Documentation/timers/hpet.txt @@ -7,7 +7,7 @@ by Intel and Microsoft which can be found at Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision") and up to 32 comparators. Normally three or more comparators are provided, -each of which can generate oneshot interupts and at least one of which has +each of which can generate oneshot interrupts and at least one of which has additional hardware to support periodic interrupts. The comparators are also called "timers", which can be misleading since usually timers are independent of each other ... these share a counter, complicating resets. diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt index 20d368c..9bd00fc 100644 --- a/Documentation/timers/timer_stats.txt +++ b/Documentation/timers/timer_stats.txt @@ -62,7 +62,7 @@ Timerstats sample period: 3.888770 s The first column is the number of events, the second column the pid, the third column is the name of the process. The forth column shows the function which -initialized the timer and in parantheses the callback function which was +initialized the timer and in parenthesis the callback function which was executed on expiry. Thomas, Ingo diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt new file mode 100644 index 0000000..f157d75 --- /dev/null +++ b/Documentation/trace/events.txt @@ -0,0 +1,90 @@ + Event Tracing + + Documentation written by Theodore Ts'o + Updated by Li Zefan + +1. Introduction +=============== + +Tracepoints (see Documentation/trace/tracepoints.txt) can be used +without creating custom kernel modules to register probe functions +using the event tracing infrastructure. + +Not all tracepoints can be traced using the event tracing system; +the kernel developer must provide code snippets which define how the +tracing information is saved into the tracing buffer, and how the +tracing information should be printed. + +2. Using Event Tracing +====================== + +2.1 Via the 'set_event' interface +--------------------------------- + +The events which are available for tracing can be found in the file +/debug/tracing/available_events. + +To enable a particular event, such as 'sched_wakeup', simply echo it +to /debug/tracing/set_event. For example: + + # echo sched_wakeup >> /debug/tracing/set_event + +[ Note: '>>' is necessary, otherwise it will firstly disable + all the events. ] + +To disable an event, echo the event name to the set_event file prefixed +with an exclamation point: + + # echo '!sched_wakeup' >> /debug/tracing/set_event + +To disable all events, echo an empty line to the set_event file: + + # echo > /debug/tracing/set_event + +To enable all events, echo '*:*' or '*:' to the set_event file: + + # echo *:* > /debug/tracing/set_event + +The events are organized into subsystems, such as ext4, irq, sched, +etc., and a full event name looks like this: :. The +subsystem name is optional, but it is displayed in the available_events +file. All of the events in a subsystem can be specified via the syntax +":*"; for example, to enable all irq events, you can use the +command: + + # echo 'irq:*' > /debug/tracing/set_event + +2.2 Via the 'enable' toggle +--------------------------- + +The events available are also listed in /debug/tracing/events/ hierarchy +of directories. + +To enable event 'sched_wakeup': + + # echo 1 > /debug/tracing/events/sched/sched_wakeup/enable + +To disable it: + + # echo 0 > /debug/tracing/events/sched/sched_wakeup/enable + +To enable all events in sched subsystem: + + # echo 1 > /debug/tracing/events/sched/enable + +To eanble all events: + + # echo 1 > /debug/tracing/events/enable + +When reading one of these enable files, there are four results: + + 0 - all events this file affects are disabled + 1 - all events this file affects are enabled + X - there is a mixture of events enabled and disabled + ? - this file does not affect any event + +3. Defining an event-enabled tracepoint +======================================= + +See The example provided in samples/trace_events + diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index fd9a3e6..7bd27f0 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -179,7 +179,7 @@ Here is the list of current tracers that may be configured. Function call tracer to trace all kernel functions. - "function_graph_tracer" + "function_graph" Similar to the function tracer except that the function tracer probes the functions on their entry @@ -518,9 +518,18 @@ priority with zero (0) being the highest priority and the nice values starting at 100 (nice -20). Below is a quick chart to map the kernel priority to user land priorities. - Kernel priority: 0 to 99 ==> user RT priority 99 to 0 - Kernel priority: 100 to 139 ==> user nice -20 to 19 - Kernel priority: 140 ==> idle task priority + Kernel Space User Space + =============================================================== + 0(high) to 98(low) user RT priority 99(high) to 1(low) + with SCHED_RR or SCHED_FIFO + --------------------------------------------------------------- + 99 sched_priority is not used in scheduling + decisions(it must be specified as 0) + --------------------------------------------------------------- + 100(high) to 139(low) user nice -20(high) to 19(low) + --------------------------------------------------------------- + 140 idle task priority + --------------------------------------------------------------- The task states are: @@ -1825,4 +1834,4 @@ an error. ----------- More details can be found in the source code, in the -kernel/tracing/*.c files. +kernel/trace/*.c files. diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt index a956d9b..6308735 100644 --- a/Documentation/trace/kmemtrace.txt +++ b/Documentation/trace/kmemtrace.txt @@ -64,7 +64,7 @@ III. Quick usage guide CONFIG_KMEMTRACE). 2) Get the userspace tool and build it: -$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository +$ git clone git://repo.or.cz/kmemtrace-user.git # current repository $ cd kmemtrace-user/ $ ./autogen.sh $ ./configure diff --git a/Documentation/trace/power.txt b/Documentation/trace/power.txt new file mode 100644 index 0000000..cd805e1 --- /dev/null +++ b/Documentation/trace/power.txt @@ -0,0 +1,17 @@ +The power tracer collects detailed information about C-state and P-state +transitions, instead of just looking at the high-level "average" +information. + +There is a helper script found in scrips/tracing/power.pl in the kernel +sources which can be used to parse this information and create a +Scalable Vector Graphics (SVG) picture from the trace data. + +To use this tracer: + + echo 0 > /sys/kernel/debug/tracing/tracing_enabled + echo power > /sys/kernel/debug/tracing/current_tracer + echo 1 > /sys/kernel/debug/tracing/tracing_enabled + sleep 1 + echo 0 > /sys/kernel/debug/tracing/tracing_enabled + cat /sys/kernel/debug/tracing/trace | \ + perl scripts/tracing/power.pl > out.sv diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt index 4c3d62c..c480e9c 100644 --- a/Documentation/usb/WUSB-Design-overview.txt +++ b/Documentation/usb/WUSB-Design-overview.txt @@ -84,7 +84,7 @@ The different logical parts of this driver are: *UWB*: the Ultra-Wide-Band stack -- manages the radio and associated spectrum to allow for devices sharing it. Allows to - control bandwidth assingment, beaconing, scanning, etc + control bandwidth assignment, beaconing, scanning, etc * @@ -184,7 +184,7 @@ and sends the replies and notifications back to the API [/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that is chartered, among other things, to keep the tab of how the UWB radio neighborhood looks, creating and destroying devices as they show up or -dissapear. +disappear. Command execution is very simple: a command block is sent and a event block or reply is expected back. For sending/receiving command/events, a @@ -333,7 +333,7 @@ read descriptors and move our data. *Device life cycle and keep alives* -Everytime there is a succesful transfer to/from a device, we update a +Every time there is a successful transfer to/from a device, we update a per-device activity timestamp. If not, every now and then we check and if the activity timestamp gets old, we ping the device by sending it a Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this @@ -411,7 +411,7 @@ context (wa_xfer) and submit it. When the xfer is done, our callback is called and we assign the status bits and release the xfer resources. In dequeue() we are basically cancelling/aborting the transfer. We issue -a xfer abort request to the HC, cancell all the URBs we had submitted +a xfer abort request to the HC, cancel all the URBs we had submitted and not yet done and when all that is done, the xfer callback will be called--this will call the URB callback. diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt index 6f24f56..fe6a99a 100644 --- a/Documentation/usb/anchors.txt +++ b/Documentation/usb/anchors.txt @@ -27,7 +27,7 @@ Association and disassociation of URBs with anchors An association of URBs to an anchor is made by an explicit call to usb_anchor_urb(). The association is maintained until -an URB is finished by (successfull) completion. Thus disassociation +an URB is finished by (successful) completion. Thus disassociation is automatic. A function is provided to forcibly finish (kill) all URBs associated with an anchor. Furthermore, disassociation can be made with usb_unanchor_urb() @@ -76,4 +76,4 @@ usb_get_from_anchor() Returns the oldest anchored URB of an anchor. The URB is unanchored and returned with a reference. As you may mix URBs to several destinations in one anchor you have no guarantee the chronologically -first submitted URB is returned. \ No newline at end of file +first submitted URB is returned. diff --git a/Documentation/usb/callbacks.txt b/Documentation/usb/callbacks.txt index 7c81241..bfb36b3 100644 --- a/Documentation/usb/callbacks.txt +++ b/Documentation/usb/callbacks.txt @@ -65,7 +65,7 @@ Accept or decline an interface. If you accept the device return 0, otherwise -ENODEV or -ENXIO. Other error codes should be used only if a genuine error occurred during initialisation which prevented a driver from accepting a device that would else have been accepted. -You are strongly encouraged to use usbcore'sfacility, +You are strongly encouraged to use usbcore's facility, usb_set_intfdata(), to associate a data structure with an interface, so that you know which internal state and identity you associate with a particular interface. The device will not be suspended and you may do IO diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt index 914cb7e..4652c0f 100644 --- a/Documentation/video4linux/cx18.txt +++ b/Documentation/video4linux/cx18.txt @@ -11,7 +11,7 @@ encoder chip: 2) Some people have problems getting the i2c bus to work. The symptom is that the eeprom cannot be read and the card is unusable. This is probably fixed, but if you have problems - then post to the video4linux or ivtv-users mailinglist. + then post to the video4linux or ivtv-users mailing list. 3) VBI (raw or sliced) has not yet been implemented. diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index e020366..8da3a79 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -50,6 +50,10 @@ Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical pointer to single linked list of struct setup_data. +Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment + beyond the kernel_alignment added, new init_size and + pref_address fields. Added extended boot loader IDs. + **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -168,12 +172,13 @@ Offset Proto Name Meaning 021C/4 2.00+ ramdisk_size initrd size (set by boot loader) 0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only 0224/2 2.01+ heap_end_ptr Free memory after setup end -0226/2 N/A pad1 Unused +0226/1 2.02+(3 ext_loader_ver Extended boot loader version +0227/1 2.02+(3 ext_loader_type Extended boot loader ID 0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line 022C/4 2.03+ ramdisk_max Highest legal initrd address 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not -0235/1 N/A pad2 Unused +0235/1 2.10+ min_alignment Minimum alignment, as a power of two 0236/2 N/A pad3 Unused 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture @@ -182,6 +187,8 @@ Offset Proto Name Meaning 024C/4 2.08+ payload_length Length of kernel payload 0250/8 2.09+ setup_data 64-bit physical pointer to linked list of struct setup_data +0258/8 2.10+ pref_address Preferred loading address +0260/4 2.10+ init_size Linear memory required during initialization (1) For backwards compatibility, if the setup_sects field contains 0, the real value is 4. @@ -190,6 +197,8 @@ Offset Proto Name Meaning field are unusable, which means the size of a bzImage kernel cannot be determined. +(3) Ignored, but safe to set, for boot protocols 2.02-2.09. + If the "HdrS" (0x53726448) magic number is not found at offset 0x202, the boot protocol version is "old". Loading an old kernel, the following parameters should be assumed: @@ -343,18 +352,32 @@ Protocol: 2.00+ 0xTV here, where T is an identifier for the boot loader and V is a version number. Otherwise, enter 0xFF here. + For boot loader IDs above T = 0xD, write T = 0xE to this field and + write the extended ID minus 0x10 to the ext_loader_type field. + Similarly, the ext_loader_ver field can be used to provide more than + four bits for the bootloader version. + + For example, for T = 0x15, V = 0x234, write: + + type_of_loader <- 0xE4 + ext_loader_type <- 0x05 + ext_loader_ver <- 0x23 + Assigned boot loader ids: 0 LILO (0x00 reserved for pre-2.00 bootloader) 1 Loadlin 2 bootsect-loader (0x20, all other values reserved) - 3 SYSLINUX - 4 EtherBoot + 3 Syslinux + 4 Etherboot/gPXE 5 ELILO 7 GRUB - 8 U-BOOT + 8 U-Boot 9 Xen A Gujin B Qemu + C Arcturus Networks uCbootloader + E Extended (see ext_loader_type) + F Special (0xFF = undefined) Please contact if you need a bootloader ID value assigned. @@ -453,6 +476,35 @@ Protocol: 2.01+ Set this field to the offset (from the beginning of the real-mode code) of the end of the setup stack/heap, minus 0x0200. +Field name: ext_loader_ver +Type: write (optional) +Offset/size: 0x226/1 +Protocol: 2.02+ + + This field is used as an extension of the version number in the + type_of_loader field. The total version number is considered to be + (type_of_loader & 0x0f) + (ext_loader_ver << 4). + + The use of this field is boot loader specific. If not written, it + is zero. + + Kernels prior to 2.6.31 did not recognize this field, but it is safe + to write for protocol version 2.02 or higher. + +Field name: ext_loader_type +Type: write (obligatory if (type_of_loader & 0xf0) == 0xe0) +Offset/size: 0x227/1 +Protocol: 2.02+ + + This field is used as an extension of the type number in + type_of_loader field. If the type in type_of_loader is 0xE, then + the actual type is (ext_loader_type + 0x10). + + This field is ignored if the type in type_of_loader is not 0xE. + + Kernels prior to 2.6.31 did not recognize this field, but it is safe + to write for protocol version 2.02 or higher. + Field name: cmd_line_ptr Type: write (obligatory) Offset/size: 0x228/4 @@ -482,11 +534,19 @@ Protocol: 2.03+ 0x37FFFFFF, you can start your ramdisk at 0x37FE0000.) Field name: kernel_alignment -Type: read (reloc) +Type: read/modify (reloc) Offset/size: 0x230/4 -Protocol: 2.05+ +Protocol: 2.05+ (read), 2.10+ (modify) + + Alignment unit required by the kernel (if relocatable_kernel is + true.) A relocatable kernel that is loaded at an alignment + incompatible with the value in this field will be realigned during + kernel initialization. - Alignment unit required by the kernel (if relocatable_kernel is true.) + Starting with protocol version 2.10, this reflects the kernel + alignment preferred for optimal performance; it is possible for the + loader to modify this field to permit a lesser alignment. See the + min_alignment and pref_address field below. Field name: relocatable_kernel Type: read (reloc) @@ -498,6 +558,22 @@ Protocol: 2.05+ After loading, the boot loader must set the code32_start field to point to the loaded code, or to a boot loader hook. +Field name: min_alignment +Type: read (reloc) +Offset/size: 0x235/1 +Protocol: 2.10+ + + This field, if nonzero, indicates as a power of two the minimum + alignment required, as opposed to preferred, by the kernel to boot. + If a boot loader makes use of this field, it should update the + kernel_alignment field with the alignment unit desired; typically: + + kernel_alignment = 1 << min_alignment + + There may be a considerable performance cost with an excessively + misaligned kernel. Therefore, a loader should typically try each + power-of-two alignment from kernel_alignment down to this alignment. + Field name: cmdline_size Type: read Offset/size: 0x238/4 @@ -582,6 +658,36 @@ Protocol: 2.09+ sure to consider the case where the linked list already contains entries. +Field name: pref_address +Type: read (reloc) +Offset/size: 0x258/8 +Protocol: 2.10+ + + This field, if nonzero, represents a preferred load address for the + kernel. A relocating bootloader should attempt to load at this + address if possible. + + A non-relocatable kernel will unconditionally move itself and to run + at this address. + +Field name: init_size +Type: read +Offset/size: 0x25c/4 + + This field indicates the amount of linear contiguous memory starting + at the kernel runtime start address that the kernel needs before it + is capable of examining its memory map. This is not the same thing + as the total amount of memory the kernel needs to boot, but it can + be used by a relocating boot loader to help select a safe load + address for the kernel. + + The kernel runtime start address is determined by the following algorithm: + + if (relocatable_kernel) + runtime_start = align_up(load_address, kernel_alignment) + else + runtime_start = pref_address + **** THE IMAGE CHECKSUM diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index 34c1304..29a6ff8 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -5,21 +5,51 @@ only the AMD64 specific ones are listed here. Machine check - mce=off disable machine check - mce=bootlog Enable logging of machine checks left over from booting. - Disabled by default on AMD because some BIOS leave bogus ones. - If your BIOS doesn't do that it's a good idea to enable though - to make sure you log even machine check events that result - in a reboot. On Intel systems it is enabled by default. + Please see Documentation/x86/x86_64/machinecheck for sysfs runtime tunables. + + mce=off + Disable machine check + mce=no_cmci + Disable CMCI(Corrected Machine Check Interrupt) that + Intel processor supports. Usually this disablement is + not recommended, but it might be handy if your hardware + is misbehaving. + Note that you'll get more problems without CMCI than with + due to the shared banks, i.e. you might get duplicated + error logs. + mce=dont_log_ce + Don't make logs for corrected errors. All events reported + as corrected are silently cleared by OS. + This option will be useful if you have no interest in any + of corrected errors. + mce=ignore_ce + Disable features for corrected errors, e.g. polling timer + and CMCI. All events reported as corrected are not cleared + by OS and remained in its error banks. + Usually this disablement is not recommended, however if + there is an agent checking/clearing corrected errors + (e.g. BIOS or hardware monitoring applications), conflicting + with OS's error handling, and you cannot deactivate the agent, + then this option will be a help. + mce=bootlog + Enable logging of machine checks left over from booting. + Disabled by default on AMD because some BIOS leave bogus ones. + If your BIOS doesn't do that it's a good idea to enable though + to make sure you log even machine check events that result + in a reboot. On Intel systems it is enabled by default. mce=nobootlog Disable boot machine check logging. - mce=tolerancelevel (number) + mce=tolerancelevel[,monarchtimeout] (number,number) + tolerance levels: 0: always panic on uncorrected errors, log corrected errors 1: panic or SIGBUS on uncorrected errors, log corrected errors 2: SIGBUS or log uncorrected errors, log corrected errors 3: never panic or SIGBUS, log all errors (for testing only) Default is 1 Can be also set using sysfs which is preferable. + monarchtimeout: + Sets the time in us to wait for other CPUs on machine checks. 0 + to disable. nomce (for compatibility with i386): same as mce=off @@ -150,11 +180,6 @@ NUMA Otherwise, the remaining system RAM is allocated to an additional node. - numa=hotadd=percent - Only allow hotadd memory to preallocate page structures upto - percent of already available memory. - numa=hotadd=0 will disable hotadd memory. - ACPI acpi=off Don't enable ACPI diff --git a/Documentation/x86/x86_64/machinecheck b/Documentation/x86/x86_64/machinecheck index a05e58e..b1fb302 100644 --- a/Documentation/x86/x86_64/machinecheck +++ b/Documentation/x86/x86_64/machinecheck @@ -41,7 +41,9 @@ check_interval the polling interval. When the poller stops finding MCEs, it triggers an exponential backoff (poll less often) on the polling interval. The check_interval variable is both the initial and - maximum polling interval. + maximum polling interval. 0 means no polling for corrected machine + check errors (but some corrected errors might be still reported + in other ways) tolerant Tolerance level. When a machine check exception occurs for a non @@ -67,6 +69,10 @@ trigger Program to run when a machine check event is detected. This is an alternative to running mcelog regularly from cron and allows to detect events faster. +monarch_timeout + How long to wait for the other CPUs to machine check too on a + exception. 0 to disable waiting for other CPUs. + Unit: us TBD document entries for AMD threshold interrupt configuration diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index 29b52b1..d6498e3 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt @@ -6,10 +6,11 @@ Virtual memory map with 4 level page tables: 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm hole caused by [48:63] sign extension ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole -ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory -ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole -ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space -ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) +ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory +ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole +ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space +ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole +ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB) ... unused hole ... ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0 ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space diff --git a/MAINTAINERS b/MAINTAINERS index cf4abdd..2cb7566 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -71,7 +71,7 @@ P: Person M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info -T: SCM tree type and location. Type is one of: git, hg, quilt. +T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -159,7 +159,8 @@ F: drivers/net/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net -S: Orphan +M: alan@lxorguk.ukuu.org.uk +S: Odd Fixes F: drivers/serial/8250* F: include/linux/serial_8250.h @@ -680,6 +681,13 @@ M: sakoman@gmail.com L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT +P: Philipp Zabel +M: philipp.zabel@gmail.com +S: Maintained +F: arch/arm/mach-pxa/hx4700.c +F: arch/arm/mach-pxa/include/mach/hx4700.h + ARM/HP JORNADA 7XX MACHINE SUPPORT P: Kristoffer Ericson M: kristoffer.ericson@gmail.com @@ -939,6 +947,12 @@ P: Luis R. Rodriguez M: lrodriguez@atheros.com P: Jouni Malinen M: jmalinen@atheros.com +P: Sujith Manoharan +M: Sujith.Manoharan@atheros.com +P: Vasanthakumar Thiagarajan +M: vasanth@atheros.com +P: Senthil Balasubramanian +M: senthilkumar@atheros.com L: linux-wireless@vger.kernel.org L: ath9k-devel@lists.ath9k.org S: Supported @@ -1331,6 +1345,13 @@ F: drivers/net/can/ F: include/linux/can/ F: include/linux/can.h +CAN NETWORK DRIVERS +P: Wolfgang Grandegger +M: wg@grandegger.com +L: socketcan-core@lists.berlios.de (subscribers-only) +W: http://developer.berlios.de/projects/socketcan/ +S: Maintained + CELL BROADBAND ENGINE ARCHITECTURE P: Arnd Bergmann M: arnd@arndb.de @@ -1801,10 +1822,10 @@ F: drivers/char/epca* F: drivers/char/digi* DIRECTORY NOTIFICATION (DNOTIFY) -P: Stephen Rothwell -M: sfr@canb.auug.org.au +P: Eric Paris +M: eparis@parisplace.org L: linux-kernel@vger.kernel.org -S: Supported +S: Maintained F: Documentation/filesystems/dnotify.txt F: fs/notify/dnotify/ F: include/linux/dnotify.h @@ -1978,6 +1999,16 @@ F: Documentation/edac.txt F: drivers/edac/edac_* F: include/linux/edac.h +EDAC-AMD64 +P: Doug Thompson +M: dougthompson@xmission.com +P: Borislav Petkov +M: borislav.petkov@amd.com +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +W: bluesmoke.sourceforge.net +S: Supported +F: drivers/edac/amd64_edac* + EDAC-E752X P: Mark Gross M: mark.gross@intel.com @@ -2094,6 +2125,15 @@ W: http://sourceforge.net/projects/lpfcxxxx S: Supported F: drivers/scsi/lpfc/ +ENE CB710 FLASH CARD READER DRIVER +P: MichaÅ‚ MirosÅ‚aw +M: mirq-linux@rere.qmqm.pl +L: linux-kernel@vger.kernel.org +S: Maintained +F: drivers/misc/cb710/ +F: drivers/mmc/host/cb710-mmc.* +F: include/linux/cb710.h + EPSON 1355 FRAMEBUFFER DRIVER P: Christopher Hoover M: ch@murgatroid.com @@ -2340,7 +2380,7 @@ F: fs/freevxfs/ FREEZER P: Pavel Machek -M: pavel@suse.cz +M: pavel@ucw.cz P: Rafael J. Wysocki M: rjw@sisk.pl L: linux-pm@lists.linux-foundation.org @@ -2816,6 +2856,18 @@ L: linux1394-devel@lists.sourceforge.net S: Maintained F: drivers/ieee1394/raw1394* +IEEE 802.15.4 SUBSYSTEM +P: Dmitry Eremin-Solenikov +M: dbaryshkov@gmail.com +P: Sergey Lapin +M: slapin@ossfans.org +L: linux-zigbee-devel@lists.sourceforge.net +W: http://apps.sourceforge.net/trac/linux-zigbee +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git +S: Maintained +F: net/ieee802154/ +F: drivers/ieee801254/ + INTEGRITY MEASUREMENT ARCHITECTURE (IMA) P: Mimi Zohar M: zohar@us.ibm.com @@ -2847,6 +2899,8 @@ P: John McCutchan M: john@johnmccutchan.com P: Robert Love M: rlove@rlove.org +P: Eric Paris +M: eparis@parisplace.org L: linux-kernel@vger.kernel.org S: Maintained F: Documentation/filesystems/inotify.txt @@ -3107,6 +3161,7 @@ M: samuel@sortiz.org L: irda-users@lists.sourceforge.net (subscribers-only) W: http://irda.sourceforge.net/ S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/irda-2.6.git F: Documentation/networking/irda.txt F: drivers/net/irda/ F: include/net/irda/ @@ -3350,6 +3405,16 @@ F: drivers/serial/kgdboc.c F: include/linux/kgdb.h F: kernel/kgdb.c +KMEMLEAK +P: Catalin Marinas +M: catalin.marinas@arm.com +L: linux-kernel@vger.kernel.org +S: Maintained +F: Documentation/kmemleak.txt +F: include/linux/kmemleak.h +F: mm/kmemleak.c +F: mm/kmemleak-test.c + KMEMTRACE P: Eduard - Gabriel Munteanu M: eduard.munteanu@linux360.ro @@ -4136,6 +4201,69 @@ S: Maintained F: drivers/video/riva/ F: drivers/video/nvidia/ +OMAP SUPPORT +P: Tony Lindgren +M: tony@atomide.com +L: linux-omap@vger.kernel.org +W: http://www.muru.com/linux/omap/ +W: http://linux.omap.com/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git +S: Maintained +F: arch/arm/*omap* + +OMAP CLOCK FRAMEWORK SUPPORT +P: Paul Walmsley +M: paul@pwsan.com +L: linux-omap@vger.kernel.org +S: Maintained +F: arch/arm/*omap*/*clock* + +OMAP POWER MANAGEMENT SUPPORT +P: Kevin Hilman +M: khilman@deeprootsystems.com +L: linux-omap@vger.kernel.org +S: Maintained +F: arch/arm/*omap*/*pm* + +OMAP AUDIO SUPPORT +P: Jarkko Nikula +M: jhnikula@gmail.com +L: alsa-devel@alsa-project.org (subscribers-only) +L: linux-omap@vger.kernel.org +S: Maintained +F: sound/soc/omap/ + +OMAP FRAMEBUFFER SUPPORT +P: Imre Deak +M: imre.deak@nokia.com +L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-omap@vger.kernel.org +S: Maintained +F: drivers/video/omap/ + +OMAP MMC SUPPORT +P: Jarkko Lavinen +M: jarkko.lavinen@nokia.com +L: linux-kernel@vger.kernel.org +L: linux-omap@vger.kernel.org +S: Maintained +F: drivers/mmc/host/*omap* + +OMAP RANDOM NUMBER GENERATOR SUPPORT +P: Deepak Saxena +M: dsaxena@plexity.net +S: Maintained +F: drivers/char/hw_random/omap-rng.c + +OMAP USB SUPPORT +P: Felipe Balbi +M: felipe.balbi@nokia.com +P: David Brownell +M: dbrownell@users.sourceforge.net +L: linux-usb@vger.kernel.org +L: linux-omap@vger.kernel.org +S: Maintained + OMFS FILESYSTEM P: Bob Copeland M: me@bobcopeland.com @@ -4392,6 +4520,16 @@ S: Maintained F: include/linux/delayacct.h F: kernel/delayacct.c +PERFORMANCE COUNTER SUBSYSTEM +P: Peter Zijlstra +M: a.p.zijlstra@chello.nl +P: Paul Mackerras +M: paulus@samba.org +P: Ingo Molnar +M: mingo@elte.hu +L: linux-kernel@vger.kernel.org +S: Supported + PERSONALITY HANDLING P: Christoph Hellwig M: hch@infradead.org @@ -4509,8 +4647,8 @@ S: Maintained F: drivers/ata/sata_promise.* PS3 NETWORK SUPPORT -P: Masakazu Mokuno -M: mokuno@sm.sony.co.jp +P: Geoff Levand +M: geoffrey.levand@am.sony.com L: netdev@vger.kernel.org L: cbe-oss-dev@ozlabs.org S: Supported @@ -4564,7 +4702,7 @@ F: drivers/media/video/pvrusb2/ PXA2xx/PXA3xx SUPPORT P: Eric Miao -M: eric.miao@marvell.com +M: eric.y.miao@gmail.com P: Russell King M: linux@arm.linux.org.uk L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) @@ -4574,23 +4712,24 @@ F: drivers/pcmcia/pxa2xx* F: drivers/spi/pxa2xx* F: drivers/usb/gadget/pxa2* F: include/sound/pxa2xx-lib.h -F: sound/soc/pxa/pxa2xx* +F: sound/arm/pxa* +F: sound/soc/pxa PXA168 SUPPORT P: Eric Miao -M: eric.miao@marvell.com +M: eric.y.miao@gmail.com P: Jason Chagas M: jason.chagas@marvell.com L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git -S: Supported +S: Maintained PXA910 SUPPORT P: Eric Miao -M: eric.miao@marvell.com +M: eric.y.miao@gmail.com L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git -S: Supported +S: Maintained PXA MMCI DRIVER S: Orphan @@ -4710,7 +4849,7 @@ F: drivers/net/r6040.c RDS - RELIABLE DATAGRAM SOCKETS P: Andy Grover M: andy.grover@oracle.com -L: rds-devel@oss.oracle.com +L: rds-devel@oss.oracle.com (moderated for non-subscribers) S: Supported F: net/rds/ @@ -4750,9 +4889,9 @@ S: Supported F: fs/reiserfs/ RFKILL -P: Ivo van Doorn -M: IvDoorn@gmail.com -L: netdev@vger.kernel.org +P: Johannes Berg +M: johannes@sipsolutions.net +L: linux-wireless@vger.kernel.org S: Maintained F Documentation/rfkill.txt F: net/rfkill/ @@ -5111,7 +5250,6 @@ P: Vincent Sanders M: support@simtec.co.uk W: http://www.simtec.co.uk/products/EB110ATX/ S: Supported -F: arch/arm/mach-ebsa110/ SIMTEC EB2410ITX (BAST) P: Ben Dooks @@ -5302,11 +5440,12 @@ P: Liam Girdwood M: lrg@slimlogic.co.uk P: Mark Brown M: broonie@opensource.wolfsonmicro.com -T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc +T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git L: alsa-devel@alsa-project.org (subscribers-only) W: http://alsa-project.org/main/index.php/ASoC S: Supported F: sound/soc/ +F: include/sound/soc* SPARC + UltraSPARC (sparc/sparc64) P: David S. Miller @@ -5524,20 +5663,6 @@ F: drivers/misc/tifm* F: drivers/mmc/host/tifm_sd.c F: include/linux/tifm.h -TI OMAP MMC INTERFACE DRIVER -P: Carlos Aguiar, Anderson Briglia and Syed Khasim -M: linux-omap@vger.kernel.org -W: http://linux.omap.com -W: http://www.muru.com/linux/omap/ -S: Maintained -F: drivers/mmc/host/omap.c - -TI OMAP RANDOM NUMBER GENERATOR SUPPORT -P: Deepak Saxena -M: dsaxena@plexity.net -S: Maintained -F: drivers/char/hw_random/omap-rng.c - TIPC NETWORK LAYER P: Per Liden M: per.liden@ericsson.com @@ -5629,6 +5754,7 @@ P: Alan Cox M: alan@lxorguk.ukuu.org.uk L: linux-kernel@vger.kernel.org S: Maintained +T: stgit http://zeniv.linux.org.uk/~alan/ttydev/ TULIP NETWORK DRIVERS P: Grant Grundler diff --git a/Makefile b/Makefile index 03373bb..ea63667 100644 --- a/Makefile +++ b/Makefile @@ -35,10 +35,8 @@ MAKEFLAGS += -rR --no-print-directory # To put more focus on warnings, be less verbose as default # Use 'make V=1' to see the full commands -ifdef V - ifeq ("$(origin V)", "command line") - KBUILD_VERBOSE = $(V) - endif +ifeq ("$(origin V)", "command line") + KBUILD_VERBOSE = $(V) endif ifndef KBUILD_VERBOSE KBUILD_VERBOSE = 0 @@ -54,10 +52,8 @@ endif # See the file "Documentation/sparse.txt" for more details, including # where to get the "sparse" utility. -ifdef C - ifeq ("$(origin C)", "command line") - KBUILD_CHECKSRC = $(C) - endif +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) endif ifndef KBUILD_CHECKSRC KBUILD_CHECKSRC = 0 @@ -69,12 +65,10 @@ endif ifdef SUBDIRS KBUILD_EXTMOD ?= $(SUBDIRS) endif -ifdef M - ifeq ("$(origin M)", "command line") - KBUILD_EXTMOD := $(M) - endif -endif +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif # kbuild supports saving output files in a separate directory. # To locate output files in a separate directory two syntaxes are supported. @@ -98,10 +92,8 @@ ifeq ($(KBUILD_SRC),) # OK, Make called in directory where kernel src resides # Do we want to locate output files in a separate directory? -ifdef O - ifeq ("$(origin O)", "command line") - KBUILD_OUTPUT := $(O) - endif +ifeq ("$(origin O)", "command line") + KBUILD_OUTPUT := $(O) endif # That's our default target when none is given on the command line diff --git a/README b/README index d6c6c74..737838f 100644 --- a/README +++ b/README @@ -174,8 +174,17 @@ CONFIGURING the kernel: "make silentoldconfig" Like above, but avoids cluttering the screen with questions already answered. + Additionally updates the dependencies. "make defconfig" Create a ./.config file by using the default - symbol values from arch/$ARCH/defconfig. + symbol values from either arch/$ARCH/defconfig + or arch/$ARCH/configs/${PLATFORM}_defconfig, + depending on the architecture. + "make ${PLATFORM}_defconfig" + Create a ./.config file by using the default + symbol values from + arch/$ARCH/configs/${PLATFORM}_defconfig. + Use "make help" to get a list of all available + platforms of your architecture. "make allyesconfig" Create a ./.config file by setting symbol values to 'y' as much as possible. diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 62b3635..610dff4 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -256,5 +256,5 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) #define smp_mb__before_atomic_inc() smp_mb() #define smp_mb__after_atomic_inc() smp_mb() -#include +#include #endif /* _ALPHA_ATOMIC_H */ diff --git a/arch/alpha/include/asm/bitsperlong.h b/arch/alpha/include/asm/bitsperlong.h new file mode 100644 index 0000000..ad57f78 --- /dev/null +++ b/arch/alpha/include/asm/bitsperlong.h @@ -0,0 +1,8 @@ +#ifndef __ASM_ALPHA_BITSPERLONG_H +#define __ASM_ALPHA_BITSPERLONG_H + +#define __BITS_PER_LONG 64 + +#include + +#endif /* __ASM_ALPHA_BITSPERLONG_H */ diff --git a/arch/alpha/include/asm/errno.h b/arch/alpha/include/asm/errno.h index 69e2655..98099bd 100644 --- a/arch/alpha/include/asm/errno.h +++ b/arch/alpha/include/asm/errno.h @@ -120,4 +120,6 @@ #define EOWNERDEAD 136 /* Owner died */ #define ENOTRECOVERABLE 137 /* State not recoverable */ +#define ERFKILL 138 /* Operation not possible due to RF-kill */ + #endif diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h index 0995f9d..07af062 100644 --- a/arch/alpha/include/asm/page.h +++ b/arch/alpha/include/asm/page.h @@ -93,6 +93,6 @@ typedef struct page *pgtable_t; VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) #include -#include +#include #endif /* _ALPHA_PAGE_H */ diff --git a/arch/alpha/include/asm/signal.h b/arch/alpha/include/asm/signal.h index 13c2305..a938830 100644 --- a/arch/alpha/include/asm/signal.h +++ b/arch/alpha/include/asm/signal.h @@ -111,7 +111,7 @@ typedef unsigned long sigset_t; #define SIG_UNBLOCK 2 /* for unblocking signals */ #define SIG_SETMASK 3 /* for setting the signal mask */ -#include +#include #ifdef __KERNEL__ struct osf_sigaction { diff --git a/arch/alpha/include/asm/suspend.h b/arch/alpha/include/asm/suspend.h deleted file mode 100644 index c7042d5..0000000 --- a/arch/alpha/include/asm/suspend.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ALPHA_SUSPEND_H -#define __ALPHA_SUSPEND_H - -/* Dummy include. */ - -#endif /* __ALPHA_SUSPEND_H */ diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h index f072f34..bd621ec 100644 --- a/arch/alpha/include/asm/types.h +++ b/arch/alpha/include/asm/types.h @@ -25,9 +25,6 @@ typedef unsigned int umode_t; * These aren't exported outside the kernel to avoid name space clashes */ #ifdef __KERNEL__ - -#define BITS_PER_LONG 64 - #ifndef __ASSEMBLY__ typedef u64 dma_addr_t; diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 42ee059..9a3334a 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -371,8 +371,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path, int retval = -EINVAL; char *name; - lock_kernel(); - name = getname(path); retval = PTR_ERR(name); if (IS_ERR(name)) @@ -392,7 +390,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path, } putname(name); out: - unlock_kernel(); return retval; } diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index 9c9d1fd..5bd5259 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) } } -static void +static int dp264_set_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&dp264_irq_lock); cpu_set_irq_affinity(irq, *affinity); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); + + return 0; } -static void +static int clipper_set_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&dp264_irq_lock); cpu_set_irq_affinity(irq - 16, *affinity); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); + + return 0; } static struct hw_interrupt_type dp264_irq_type = { diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index 27f840a..8dd239e 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) } -static void +static int titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&titan_irq_lock); titan_cpu_set_irq_affinity(irq - 16, *affinity); titan_update_irq_hw(titan_cached_irq_mask); spin_unlock(&titan_irq_lock); + + return 0; } static void diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c index 62dc379..813c9b6 100644 --- a/arch/alpha/mm/extable.c +++ b/arch/alpha/mm/extable.c @@ -48,6 +48,27 @@ void sort_extable(struct exception_table_entry *start, cmp_ex, swap_ex); } +#ifdef CONFIG_MODULES +/* + * Any entry referring to the module init will be at the beginning or + * the end. + */ +void trim_init_extable(struct module *m) +{ + /*trim the beginning*/ + while (m->num_exentries && + within_module_init(ex_to_addr(&m->extable[0]), m)) { + m->extable++; + m->num_exentries--; + } + /*trim the end*/ + while (m->num_exentries && + within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]), + m)) + m->num_exentries--; +} +#endif /* CONFIG_MODULES */ + const struct exception_table_entry * search_extable(const struct exception_table_entry *first, const struct exception_table_entry *last, diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d02cdb..2947510 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION config GENERIC_GPIO bool - default n config GENERIC_TIME bool - default n config GENERIC_CLOCKEVENTS bool - default n config GENERIC_CLOCKEVENTS_BROADCAST bool @@ -55,7 +52,6 @@ config MMU config NO_IOPORT bool - default n config EISA bool @@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM config ARCH_HAS_ILOG2_U32 bool - default n config ARCH_HAS_ILOG2_U64 bool - default n config GENERIC_HWEIGHT bool @@ -253,6 +247,14 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. +config ARCH_GEMINI + bool "Cortina Systems Gemini" + select CPU_FA526 + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for the Cortina Systems Gemini family SoCs + config ARCH_EBSA110 bool "EBSA-110" select CPU_SA110 @@ -277,14 +279,6 @@ config ARCH_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. -config ARCH_GEMINI - bool "Cortina Systems Gemini" - select CPU_FA526 - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for the Cortina Systems Gemini family SoCs - config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 @@ -293,6 +287,30 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. +config ARCH_MXC + bool "Freescale MXC/iMX-based" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select ARCH_MTD_XIP + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + help + Support for Freescale MXC/iMX-based family of processors + +config ARCH_STMP3XXX + bool "Freescale STMP3xxx" + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select ARCH_REQUIRE_GPIOLIB + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select USB_ARCH_HAS_EHCI + help + Support for systems based on the Freescale 3xxx CPUs. + config ARCH_NETX bool "Hilscher NetX based" select CPU_ARM926T @@ -309,15 +327,6 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x -config ARCH_IMX - bool "IMX" - select CPU_ARM920T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Motorola's i.MX family of processors (MX1, MXL). - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -398,6 +407,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -405,28 +415,6 @@ config ARCH_KIRKWOOD Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_KS8695 - bool "Micrel/Kendin KS8695" - select CPU_ARM922T - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based - System-on-Chip devices. - -config ARCH_NS9XXX - bool "NetSilicon NS9xxx" - select CPU_ARM926T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Say Y here if you intend to run this kernel on a NetSilicon NS9xxx - System. - - - config ARCH_LOKI bool "Marvell Loki (88RC8480)" select CPU_FEROCEON @@ -441,6 +429,7 @@ config ARCH_MV78XX0 select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -448,23 +437,13 @@ config ARCH_MV78XX0 Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. -config ARCH_MXC - bool "Freescale MXC/iMX-based" - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select ARCH_MTD_XIP - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - help - Support for Freescale MXC/iMX-based family of processors - config ARCH_ORION5X bool "Marvell Orion" depends on MMU select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -473,6 +452,52 @@ config ARCH_ORION5X Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), Orion-2 (5281), Orion-1-90 (6183). +config ARCH_MMP + bool "Marvell PXA168/910" + depends on MMU + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select PLAT_PXA + help + Support for Marvell's PXA168/910 processor line. + +config ARCH_KS8695 + bool "Micrel/Kendin KS8695" + select CPU_ARM922T + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based + System-on-Chip devices. + +config ARCH_NS9XXX + bool "NetSilicon NS9xxx" + select CPU_ARM926T + select GENERIC_GPIO + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + help + Say Y here if you intend to run this kernel on a NetSilicon NS9xxx + System. + + + +config ARCH_W90X900 + bool "Nuvoton W90X900 CPU" + select CPU_ARM926T + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO + select COMMON_CLKDEV + help + Support for Nuvoton (Winbond logic dept.) ARM9 processor,You + can login www.mcuos.com or www.nuvoton.com to know more. + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T @@ -495,19 +520,16 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MMP - bool "Marvell PXA168/910" - depends on MMU - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV +config ARCH_MSM + bool "Qualcomm MSM" + select CPU_V6 select GENERIC_TIME select GENERIC_CLOCKEVENTS - select TICK_ONESHOT - select PLAT_PXA help - Support for Marvell's PXA168/910 processor line. + Support for Qualcomm MSM7K based systems. This runs on the ARM11 + apps processor of the MSM7K and depends on a shared memory + interface to the ARM9 modem processor which runs the baseband stack + and controls some vital subsystems (clock and power control, etc). config ARCH_RPC bool "RiscPC" @@ -576,6 +598,20 @@ config ARCH_LH7A40X core with a wide array of integrated devices for hand-held and low-power applications. +config ARCH_U300 + bool "ST-Ericsson U300 Series" + depends on MMU + select CPU_ARM926T + select ARM_AMBA + select ARM_VIC + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_GPIO + help + Support for ST-Ericsson U300 series mobile platforms. + config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926T @@ -587,6 +623,7 @@ config ARCH_DAVINCI select ZONE_DMA select HAVE_IDE select COMMON_CLKDEV + select GENERIC_ALLOCATOR help Support for TI's DaVinci platform. @@ -600,24 +637,6 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_MSM - bool "Qualcomm MSM" - select CPU_V6 - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm MSM7K based systems. This runs on the ARM11 - apps processor of the MSM7K and depends on a shared memory - interface to the ARM9 modem processor which runs the baseband stack - and controls some vital subsystems (clock and power control, etc). - -config ARCH_W90X900 - bool "Nuvoton W90X900 CPU" - select CPU_ARM926T - help - Support for Nuvoton (Winbond logic dept.) ARM9 processor,You - can login www.mcuos.com or www.nuvoton.com to know more. - endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -681,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig" source "arch/arm/mach-s3c6410/Kconfig" endif -source "arch/arm/mach-lh7a40x/Kconfig" +source "arch/arm/plat-stmp3xxx/Kconfig" -source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-h720x/Kconfig" @@ -707,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-msm/Kconfig" +source "arch/arm/mach-u300/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -859,8 +880,11 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) + depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4) + depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -878,6 +902,18 @@ config SMP If you don't know what to do here, say N. +config HAVE_ARM_SCU + bool + depends on SMP + help + This option enables support for the ARM system coherency unit + +config HAVE_ARM_TWD + bool + depends on SMP + help + This options enables support for the ARM timer and watchdog unit + choice prompt "Memory split" default VMSPLIT_3G @@ -916,8 +952,10 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP) + depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ + REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4) default y + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -979,7 +1017,6 @@ config OABI_COMPAT config ARCH_HAS_HOLES_MEMORYMODEL bool - default n # Discontigmem is deprecated config ARCH_DISCONTIGMEM_ENABLE @@ -1022,12 +1059,12 @@ source "mm/Kconfig" config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_EBSA110 || \ - ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_EBSA285 || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ARCH_AT91 || ARCH_DAVINCI || \ - ARCH_KS8695 || MACH_RD88F5182 + ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW help If you say Y here, the LEDs on your machine will be used to provide useful information about your current system status. @@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP correct operation of some network protocols. With an IP-only configuration it is safe to say N, otherwise say Y. +config UACCESS_WITH_MEMCPY + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" + depends on MMU && EXPERIMENTAL + default y if CPU_FEROCEON + help + Implement faster copy_to_user and clear_user methods for CPU + cores where a 8-word STM instruction give significantly higher + memory write throughput than a sequence of individual 32bit stores. + + A possible side effect is a slight increase in scheduling latency + between threads sharing the same address space if they invoke + such copy operations with large buffers. + + However, if the CPU data cache is using a write-allocate mode, + this option is unlikely to provide any performance gain. + endmenu menu "Boot options" @@ -1188,7 +1241,7 @@ endmenu menu "CPU Power Management" -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA) source "drivers/cpufreq/Kconfig" @@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR If in doubt, say Y. -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_IMX && CPU_FREQ - default n - help - This enables the CPUfreq driver for i.MX CPUs. - - If in doubt, say N. +config CPU_FREQ_PXA + bool + depends on CPU_FREQ && ARCH_PXA && PXA25x + default y + select CPU_FREQ_DEFAULT_GOV_USERSPACE endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e84729b..c877d6d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -11,6 +11,9 @@ # Copyright (C) 1995-2001 by Russell King LDFLAGS_vmlinux :=-p --no-undefined -X +ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) +LDFLAGS_vmlinux += --be8 +endif CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S GZFLAGS :=-9 @@ -99,64 +102,73 @@ CHECKFLAGS += -D__arm__ #Default value head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o textofs-y := 0x00008000 - - machine-$(CONFIG_ARCH_RPC) := rpc - machine-$(CONFIG_ARCH_EBSA110) := ebsa110 - machine-$(CONFIG_FOOTBRIDGE) := footbridge - machine-$(CONFIG_ARCH_SHARK) := shark - machine-$(CONFIG_ARCH_SA1100) := sa1100 -ifeq ($(CONFIG_ARCH_SA1100),y) +textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory - textofs-$(CONFIG_SA1111) := 0x00208000 +ifeq ($(CONFIG_ARCH_SA1100),y) +textofs-$(CONFIG_SA1111) := 0x00208000 endif - machine-$(CONFIG_ARCH_PXA) := pxa - machine-$(CONFIG_ARCH_MMP) := mmp - plat-$(CONFIG_PLAT_PXA) := pxa - machine-$(CONFIG_ARCH_L7200) := l7200 - machine-$(CONFIG_ARCH_INTEGRATOR) := integrator - machine-$(CONFIG_ARCH_GEMINI) := gemini - textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 - machine-$(CONFIG_ARCH_CLPS711X) := clps711x - machine-$(CONFIG_ARCH_IOP32X) := iop32x - machine-$(CONFIG_ARCH_IOP33X) := iop33x - machine-$(CONFIG_ARCH_IOP13XX) := iop13xx - plat-$(CONFIG_PLAT_IOP) := iop - machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx - machine-$(CONFIG_ARCH_IXP2000) := ixp2000 - machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx - machine-$(CONFIG_ARCH_OMAP1) := omap1 - machine-$(CONFIG_ARCH_OMAP2) := omap2 - machine-$(CONFIG_ARCH_OMAP3) := omap2 - plat-$(CONFIG_ARCH_OMAP) := omap - machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 - machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 - plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c - machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 - plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c - machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x - machine-$(CONFIG_ARCH_VERSATILE) := versatile - machine-$(CONFIG_ARCH_IMX) := imx - machine-$(CONFIG_ARCH_H720X) := h720x - machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 - machine-$(CONFIG_ARCH_REALVIEW) := realview - machine-$(CONFIG_ARCH_AT91) := at91 - machine-$(CONFIG_ARCH_EP93XX) := ep93xx - machine-$(CONFIG_ARCH_PNX4008) := pnx4008 - machine-$(CONFIG_ARCH_NETX) := netx - machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx - machine-$(CONFIG_ARCH_DAVINCI) := davinci - machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood - machine-$(CONFIG_ARCH_KS8695) := ks8695 - plat-$(CONFIG_ARCH_MXC) := mxc - machine-$(CONFIG_ARCH_MX2) := mx2 - machine-$(CONFIG_ARCH_MX3) := mx3 - machine-$(CONFIG_ARCH_MX1) := mx1 - machine-$(CONFIG_ARCH_ORION5X) := orion5x - plat-$(CONFIG_PLAT_ORION) := orion - machine-$(CONFIG_ARCH_MSM) := msm - machine-$(CONFIG_ARCH_LOKI) := loki - machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 - machine-$(CONFIG_ARCH_W90X900) := w90x900 + +# Machine directory name. This list is sorted alphanumerically +# by CONFIG_* macro name. +machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 +machine-$(CONFIG_ARCH_AT91) := at91 +machine-$(CONFIG_ARCH_CLPS711X) := clps711x +machine-$(CONFIG_ARCH_DAVINCI) := davinci +machine-$(CONFIG_ARCH_EBSA110) := ebsa110 +machine-$(CONFIG_ARCH_EP93XX) := ep93xx +machine-$(CONFIG_ARCH_GEMINI) := gemini +machine-$(CONFIG_ARCH_H720X) := h720x +machine-$(CONFIG_ARCH_INTEGRATOR) := integrator +machine-$(CONFIG_ARCH_IOP13XX) := iop13xx +machine-$(CONFIG_ARCH_IOP32X) := iop32x +machine-$(CONFIG_ARCH_IOP33X) := iop33x +machine-$(CONFIG_ARCH_IXP2000) := ixp2000 +machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx +machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx +machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood +machine-$(CONFIG_ARCH_KS8695) := ks8695 +machine-$(CONFIG_ARCH_L7200) := l7200 +machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x +machine-$(CONFIG_ARCH_LOKI) := loki +machine-$(CONFIG_ARCH_MMP) := mmp +machine-$(CONFIG_ARCH_MSM) := msm +machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 +machine-$(CONFIG_ARCH_MX1) := mx1 +machine-$(CONFIG_ARCH_MX2) := mx2 +machine-$(CONFIG_ARCH_MX3) := mx3 +machine-$(CONFIG_ARCH_NETX) := netx +machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx +machine-$(CONFIG_ARCH_OMAP1) := omap1 +machine-$(CONFIG_ARCH_OMAP2) := omap2 +machine-$(CONFIG_ARCH_OMAP3) := omap2 +machine-$(CONFIG_ARCH_OMAP4) := omap2 +machine-$(CONFIG_ARCH_ORION5X) := orion5x +machine-$(CONFIG_ARCH_PNX4008) := pnx4008 +machine-$(CONFIG_ARCH_PXA) := pxa +machine-$(CONFIG_ARCH_REALVIEW) := realview +machine-$(CONFIG_ARCH_RPC) := rpc +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 +machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 +machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 +machine-$(CONFIG_ARCH_SA1100) := sa1100 +machine-$(CONFIG_ARCH_SHARK) := shark +machine-$(CONFIG_ARCH_STMP378X) := stmp378x +machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx +machine-$(CONFIG_ARCH_U300) := u300 +machine-$(CONFIG_ARCH_VERSATILE) := versatile +machine-$(CONFIG_ARCH_W90X900) := w90x900 +machine-$(CONFIG_FOOTBRIDGE) := footbridge + +# Platform directory name. This list is sorted alphanumerically +# by CONFIG_* macro name. +plat-$(CONFIG_ARCH_MXC) := mxc +plat-$(CONFIG_ARCH_OMAP) := omap +plat-$(CONFIG_PLAT_IOP) := iop +plat-$(CONFIG_PLAT_ORION) := orion +plat-$(CONFIG_PLAT_PXA) := pxa +plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c +plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c +plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index fbe5eef..ce39dc5 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -40,7 +40,7 @@ ifeq ($(CONFIG_PXA_SHARPSL),y) OBJS += head-sharpsl.o endif -ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) +ifeq ($(CONFIG_CPU_ENDIAN_BE32),y) ifeq ($(CONFIG_CPU_CP15),y) OBJS += big-endian.o else @@ -78,6 +78,9 @@ EXTRA_AFLAGS := -Wa,-march=all # linker symbols. We only define initrd_phys and params_phys if the # machine class defined the corresponding makefile variable. LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR) +ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) +LDFLAGS_vmlinux += --be8 +endif ifneq ($(INITRD_PHYS),) LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS) endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b371fba..01d49be 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -438,6 +438,9 @@ __armv4_mmu_cache_on: mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x0030 +#ifdef CONFIG_CPU_ENDIAN_BE8 + orr r0, r0, #1 << 25 @ big-endian page tables +#endif bl __common_mmu_cache_on mov r0, #0 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs @@ -455,6 +458,9 @@ __armv7_mmu_cache_on: mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer +#ifdef CONFIG_CPU_ENDIAN_BE8 + orr r0, r0, #1 << 25 @ big-endian page tables +#endif orrne r0, r0, #1 @ MMU enabled movne r1, #-1 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index a2cd9be..4efbb9d 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -4,6 +4,14 @@ config ARM_GIC config ARM_VIC bool +config ARM_VIC_NR + int + default 2 + depends on ARM_VIC + help + The maximum number of VICs available in the system, for + power management. + config ICST525 bool @@ -27,10 +35,6 @@ config SHARP_LOCOMO config SHARP_PARAM bool -config SHARPSL_PM - bool - select APM_EMULATION - config SHARP_SCOOP bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 7cb7961..76be7ff 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_TIMER_ACORN) += time-acorn.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o -obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_ARCH_IXP2000) += uengine.o obj-$(CONFIG_ARCH_IXP23XX) += uengine.o diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 5589444..f37afd9 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id, } EXPORT_SYMBOL(clkdev_alloc); +int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, + struct device *dev) +{ + struct clk *r = clk_get(dev, id); + struct clk_lookup *l; + + if (IS_ERR(r)) + return PTR_ERR(r); + + l = clkdev_alloc(r, alias, alias_dev_name); + clk_put(r); + if (!l) + return -ENODEV; + clkdev_add(l); + return 0; +} +EXPORT_SYMBOL(clk_add_alias); + /* * clkdev_drop - remove a clock dynamically allocated */ diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 3e1714c..664c7b8 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq) } #ifdef CONFIG_SMP -static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) +static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) { void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3); unsigned int shift = (irq % 4) * 8; @@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) val |= 1 << (cpu + shift); writel(val, reg); spin_unlock(&irq_controller_lock); + + return 0; } #endif diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c deleted file mode 100644 index 140f1d7..0000000 --- a/arch/arm/common/sharpsl_pm.c +++ /dev/null @@ -1,859 +0,0 @@ -/* - * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 - * series of PDAs - * - * Copyright (c) 2004-2005 Richard Purdie - * - * Based on code written by Sharp for 2.4 kernels - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -/* - * Constants - */ -#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ -#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ -#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ -#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ - -#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ -#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ -#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ -#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ -#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ - -/* - * Prototypes - */ -#ifdef CONFIG_PM -static int sharpsl_off_charge_battery(void); -static int sharpsl_check_battery_voltage(void); -static int sharpsl_fatal_check(void); -#endif -static int sharpsl_check_battery_temp(void); -static int sharpsl_ac_check(void); -static int sharpsl_average_value(int ad); -static void sharpsl_average_clear(void); -static void sharpsl_charge_toggle(struct work_struct *private_); -static void sharpsl_battery_thread(struct work_struct *private_); - - -/* - * Variables - */ -struct sharpsl_pm_status sharpsl_pm; -DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle); -DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread); -DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); - - -static int get_percentage(int voltage) -{ - int i = sharpsl_pm.machinfo->bat_levels - 1; - int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0; - struct battery_thresh *thresh; - - if (sharpsl_pm.charge_mode == CHRG_ON) - thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin; - else - thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac; - - while (i > 0 && (voltage > thresh[i].voltage)) - i--; - - return thresh[i].percentage; -} - -static int get_apm_status(int voltage) -{ - int low_thresh, high_thresh; - - if (sharpsl_pm.charge_mode == CHRG_ON) { - high_thresh = sharpsl_pm.machinfo->status_high_acin; - low_thresh = sharpsl_pm.machinfo->status_low_acin; - } else { - high_thresh = sharpsl_pm.machinfo->status_high_noac; - low_thresh = sharpsl_pm.machinfo->status_low_noac; - } - - if (voltage >= high_thresh) - return APM_BATTERY_STATUS_HIGH; - if (voltage >= low_thresh) - return APM_BATTERY_STATUS_LOW; - return APM_BATTERY_STATUS_CRITICAL; -} - -void sharpsl_battery_kick(void) -{ - schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); -} -EXPORT_SYMBOL(sharpsl_battery_kick); - - -static void sharpsl_battery_thread(struct work_struct *private_) -{ - int voltage, percent, apm_status, i = 0; - - if (!sharpsl_pm.machinfo) - return; - - sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE); - - /* Corgi cannot confirm when battery fully charged so periodically kick! */ - if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON) - && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) - schedule_delayed_work(&toggle_charger, 0); - - while(1) { - voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - - if (voltage > 0) break; - if (i++ > 5) { - voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; - dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); - break; - } - } - - voltage = sharpsl_average_value(voltage); - apm_status = get_apm_status(voltage); - percent = get_percentage(voltage); - - /* At low battery voltages, the voltage has a tendency to start - creeping back up so we try to avoid this here */ - if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { - sharpsl_pm.battstat.mainbat_voltage = voltage; - sharpsl_pm.battstat.mainbat_status = apm_status; - sharpsl_pm.battstat.mainbat_percent = percent; - } - - dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage, - sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); - -#ifdef CONFIG_BACKLIGHT_CORGI - /* If battery is low. limit backlight intensity to save power. */ - if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || - (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { - if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { - sharpsl_pm.machinfo->backlight_limit(1); - sharpsl_pm.flags |= SHARPSL_BL_LIMIT; - } - } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { - sharpsl_pm.machinfo->backlight_limit(0); - sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; - } -#endif - - /* Suspend if critical battery level */ - if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) - && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { - sharpsl_pm.flags |= SHARPSL_APM_QUEUED; - dev_err(sharpsl_pm.dev, "Fatal Off\n"); - apm_queue_event(APM_CRITICAL_SUSPEND); - } - - schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); -} - -void sharpsl_pm_led(int val) -{ - if (val == SHARPSL_LED_ERROR) { - dev_err(sharpsl_pm.dev, "Charging Error!\n"); - } else if (val == SHARPSL_LED_ON) { - dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); - led_trigger_event(sharpsl_charge_led_trigger, LED_FULL); - } else { - dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); - led_trigger_event(sharpsl_charge_led_trigger, LED_OFF); - } -} - -static void sharpsl_charge_on(void) -{ - dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); - - sharpsl_pm.full_count = 0; - sharpsl_pm.charge_mode = CHRG_ON; - schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); - schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); -} - -static void sharpsl_charge_off(void) -{ - dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); - - sharpsl_pm.machinfo->charge(0); - sharpsl_pm_led(SHARPSL_LED_OFF); - sharpsl_pm.charge_mode = CHRG_OFF; - - schedule_delayed_work(&sharpsl_bat, 0); -} - -static void sharpsl_charge_error(void) -{ - sharpsl_pm_led(SHARPSL_LED_ERROR); - sharpsl_pm.machinfo->charge(0); - sharpsl_pm.charge_mode = CHRG_ERROR; -} - -static void sharpsl_charge_toggle(struct work_struct *private_) -{ - dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); - - if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { - sharpsl_charge_off(); - return; - } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { - sharpsl_charge_error(); - return; - } - - sharpsl_pm_led(SHARPSL_LED_ON); - sharpsl_pm.machinfo->charge(0); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - sharpsl_pm.machinfo->charge(1); - - sharpsl_pm.charge_start_time = jiffies; -} - -static void sharpsl_ac_timer(unsigned long data) -{ - int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); - - dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); - - sharpsl_average_clear(); - if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) - sharpsl_charge_on(); - else if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_charge_off(); - - schedule_delayed_work(&sharpsl_bat, 0); -} - - -irqreturn_t sharpsl_ac_isr(int irq, void *dev_id) -{ - /* Delay the event slightly to debounce */ - /* Must be a smaller delay than the chrg_full_isr below */ - mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); - - return IRQ_HANDLED; -} - -static void sharpsl_chrg_full_timer(unsigned long data) -{ - dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); - - sharpsl_pm.full_count++; - - if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { - dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); - if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_charge_off(); - } else if (sharpsl_pm.full_count < 2) { - dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); - schedule_delayed_work(&toggle_charger, 0); - } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { - dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); - schedule_delayed_work(&toggle_charger, 0); - } else { - sharpsl_charge_off(); - sharpsl_pm.charge_mode = CHRG_DONE; - dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); - } -} - -/* Charging Finished Interrupt (Not present on Corgi) */ -/* Can trigger at the same time as an AC status change so - delay until after that has been processed */ -irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id) -{ - if (sharpsl_pm.flags & SHARPSL_SUSPENDED) - return IRQ_HANDLED; - - /* delay until after any ac interrupt */ - mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); - - return IRQ_HANDLED; -} - -irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id) -{ - int is_fatal = 0; - - if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) { - dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); - is_fatal = 1; - } - - if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) { - dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); - is_fatal = 1; - } - - if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { - sharpsl_pm.flags |= SHARPSL_APM_QUEUED; - apm_queue_event(APM_CRITICAL_SUSPEND); - } - - return IRQ_HANDLED; -} - -/* - * Maintain an average of the last 10 readings - */ -#define SHARPSL_CNV_VALUE_NUM 10 -static int sharpsl_ad_index; - -static void sharpsl_average_clear(void) -{ - sharpsl_ad_index = 0; -} - -static int sharpsl_average_value(int ad) -{ - int i, ad_val = 0; - static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; - - if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { - sharpsl_ad_index = 0; - return ad; - } - - sharpsl_ad[sharpsl_ad_index] = ad; - sharpsl_ad_index++; - if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { - for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) - sharpsl_ad[i] = sharpsl_ad[i+1]; - sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; - } - for (i=0; i < sharpsl_ad_index; i++) - ad_val += sharpsl_ad[i]; - - return (ad_val / sharpsl_ad_index); -} - -/* - * Take an array of 5 integers, remove the maximum and minimum values - * and return the average. - */ -static int get_select_val(int *val) -{ - int i, j, k, temp, sum = 0; - - /* Find MAX val */ - temp = val[0]; - j=0; - for (i=1; i<5; i++) { - if (temp < val[i]) { - temp = val[i]; - j = i; - } - } - - /* Find MIN val */ - temp = val[4]; - k=4; - for (i=3; i>=0; i--) { - if (temp > val[i]) { - temp = val[i]; - k = i; - } - } - - for (i=0; i<5; i++) - if (i != j && i != k ) - sum += val[i]; - - dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); - - return (sum/3); -} - -static int sharpsl_check_battery_temp(void) -{ - int val, i, buff[5]; - - /* Check battery temperature */ - for (i=0; i<5; i++) { - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); - sharpsl_pm.machinfo->measure_temp(1); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP); - sharpsl_pm.machinfo->measure_temp(0); - } - - val = get_select_val(buff); - - dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); - if (val > sharpsl_pm.machinfo->charge_on_temp) { - printk(KERN_WARNING "Not charging: temperature out of limits.\n"); - return -1; - } - - return 0; -} - -#ifdef CONFIG_PM -static int sharpsl_check_battery_voltage(void) -{ - int val, i, buff[5]; - - /* disable charge, enable discharge */ - sharpsl_pm.machinfo->charge(0); - sharpsl_pm.machinfo->discharge(1); - mdelay(SHARPSL_WAIT_DISCHARGE_ON); - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(1); - - /* Check battery voltage */ - for (i=0; i<5; i++) { - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(0); - - sharpsl_pm.machinfo->discharge(0); - - val = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); - - if (val < sharpsl_pm.machinfo->charge_on_volt) - return -1; - - return 0; -} -#endif - -static int sharpsl_ac_check(void) -{ - int temp, i, buff[5]; - - for (i=0; i<5; i++) { - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); - } - - temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); - - if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) { - dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); - return -1; - } - - return 0; -} - -#ifdef CONFIG_PM -static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) -{ - sharpsl_pm.flags |= SHARPSL_SUSPENDED; - flush_scheduled_work(); - - if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; - else - sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; - - return 0; -} - -static int sharpsl_pm_resume(struct platform_device *pdev) -{ - /* Clear the reset source indicators as they break the bootloader upon reboot */ - RCSR = 0x0f; - sharpsl_average_clear(); - sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; - sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; - - return 0; -} - -static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) -{ - dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); - - dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); - /* not charging and AC-IN! */ - - if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) { - dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); - sharpsl_pm.charge_mode = CHRG_OFF; - sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; - sharpsl_off_charge_battery(); - } - - sharpsl_pm.machinfo->presuspend(); - - PEDR = 0xffffffff; /* clear it */ - - sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; - if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { - RTSR &= RTSR_ALE; - RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; - dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); - sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; - } else if (alarm_enable) { - RTSR &= RTSR_ALE; - RTAR = alarm_time; - dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); - } else { - dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); - } - - pxa_pm_enter(state); - - sharpsl_pm.machinfo->postsuspend(); - - dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); -} - -static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) -{ - if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) - { - if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { - dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - if(sharpsl_off_charge_battery()) { - dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); - } - - if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) ) - { - dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - - return 0; -} - -static int corgi_pxa_pm_enter(suspend_state_t state) -{ - unsigned long alarm_time = RTAR; - unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); - - dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); - - corgi_goto_sleep(alarm_time, alarm_status, state); - - while (corgi_enter_suspend(alarm_time,alarm_status,state)) - {} - - if (sharpsl_pm.machinfo->earlyresume) - sharpsl_pm.machinfo->earlyresume(); - - dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); - - return 0; -} - -/* - * Check for fatal battery errors - * Fatal returns -1 - */ -static int sharpsl_fatal_check(void) -{ - int buff[5], temp, i, acin; - - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); - - /* Check AC-Adapter */ - acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - sharpsl_pm.machinfo->charge(0); - udelay(100); - sharpsl_pm.machinfo->discharge(1); /* enable discharge */ - mdelay(SHARPSL_WAIT_DISCHARGE_ON); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(1); - - /* Check battery : check inserting battery ? */ - for (i=0; i<5; i++) { - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(0); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - udelay(100); - sharpsl_pm.machinfo->charge(1); - sharpsl_pm.machinfo->discharge(0); - } - - temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); - - if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || - (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) - return -1; - return 0; -} - -static int sharpsl_off_charge_error(void) -{ - dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n"); - sharpsl_pm.machinfo->charge(0); - sharpsl_pm_led(SHARPSL_LED_ERROR); - sharpsl_pm.charge_mode = CHRG_ERROR; - return 1; -} - -/* - * Charging Control while suspended - * Return 1 - go straight to sleep - * Return 0 - sleep or wakeup depending on other factors - */ -static int sharpsl_off_charge_battery(void) -{ - int time; - - dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); - - if (sharpsl_pm.charge_mode == CHRG_OFF) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); - - /* AC Check */ - if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) - return sharpsl_off_charge_error(); - - /* Start Charging */ - sharpsl_pm_led(SHARPSL_LED_ON); - sharpsl_pm.machinfo->charge(0); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - sharpsl_pm.machinfo->charge(1); - - sharpsl_pm.charge_mode = CHRG_ON; - sharpsl_pm.full_count = 0; - - return 1; - } else if (sharpsl_pm.charge_mode != CHRG_ON) { - return 1; - } - - if (sharpsl_pm.full_count == 0) { - int time; - - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); - - if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) - return sharpsl_off_charge_error(); - - sharpsl_pm.machinfo->charge(0); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - sharpsl_pm.machinfo->charge(1); - sharpsl_pm.charge_mode = CHRG_ON; - - mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); - - time = RCNR; - while(1) { - /* Check if any wakeup event had occurred */ - if (sharpsl_pm.machinfo->charger_wakeup() != 0) - return 0; - /* Check for timeout */ - if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) - return 1; - if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n"); - sharpsl_pm.full_count++; - sharpsl_pm.machinfo->charge(0); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - sharpsl_pm.machinfo->charge(1); - return 1; - } - } - } - - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); - - mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); - - time = RCNR; - while(1) { - /* Check if any wakeup event had occurred */ - if (sharpsl_pm.machinfo->charger_wakeup() != 0) - return 0; - /* Check for timeout */ - if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { - if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); - sharpsl_pm.full_count = 0; - } - sharpsl_pm.full_count++; - return 1; - } - if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); - sharpsl_pm_led(SHARPSL_LED_OFF); - sharpsl_pm.machinfo->charge(0); - sharpsl_pm.charge_mode = CHRG_DONE; - return 1; - } - } -} -#else -#define sharpsl_pm_suspend NULL -#define sharpsl_pm_resume NULL -#endif - -static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); -} - -static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); -} - -static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); -static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); - -extern void (*apm_get_power_status)(struct apm_power_info *); - -static void sharpsl_apm_get_power_status(struct apm_power_info *info) -{ - info->ac_line_status = sharpsl_pm.battstat.ac_status; - - if (sharpsl_pm.charge_mode == CHRG_ON) - info->battery_status = APM_BATTERY_STATUS_CHARGING; - else - info->battery_status = sharpsl_pm.battstat.mainbat_status; - - info->battery_flag = (1 << info->battery_status); - info->battery_life = sharpsl_pm.battstat.mainbat_percent; -} - -#ifdef CONFIG_PM -static struct platform_suspend_ops sharpsl_pm_ops = { - .enter = corgi_pxa_pm_enter, - .valid = suspend_valid_only_mem, -}; -#endif - -static int __init sharpsl_pm_probe(struct platform_device *pdev) -{ - int ret; - - if (!pdev->dev.platform_data) - return -EINVAL; - - sharpsl_pm.dev = &pdev->dev; - sharpsl_pm.machinfo = pdev->dev.platform_data; - sharpsl_pm.charge_mode = CHRG_OFF; - sharpsl_pm.flags = 0; - - init_timer(&sharpsl_pm.ac_timer); - sharpsl_pm.ac_timer.function = sharpsl_ac_timer; - - init_timer(&sharpsl_pm.chrg_full_timer); - sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; - - led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger); - - sharpsl_pm.machinfo->init(); - - ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage); - ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage); - if (ret != 0) - dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret); - - apm_get_power_status = sharpsl_apm_get_power_status; - -#ifdef CONFIG_PM - suspend_set_ops(&sharpsl_pm_ops); -#endif - - mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); - - return 0; -} - -static int sharpsl_pm_remove(struct platform_device *pdev) -{ - suspend_set_ops(NULL); - - device_remove_file(&pdev->dev, &dev_attr_battery_percentage); - device_remove_file(&pdev->dev, &dev_attr_battery_voltage); - - led_trigger_unregister_simple(sharpsl_charge_led_trigger); - - sharpsl_pm.machinfo->exit(); - - del_timer_sync(&sharpsl_pm.chrg_full_timer); - del_timer_sync(&sharpsl_pm.ac_timer); - - return 0; -} - -static struct platform_driver sharpsl_pm_driver = { - .probe = sharpsl_pm_probe, - .remove = sharpsl_pm_remove, - .suspend = sharpsl_pm_suspend, - .resume = sharpsl_pm_resume, - .driver = { - .name = "sharpsl-pm", - }, -}; - -static int __devinit sharpsl_pm_init(void) -{ - return platform_driver_register(&sharpsl_pm_driver); -} - -static void sharpsl_pm_exit(void) -{ - platform_driver_unregister(&sharpsl_pm_driver); -} - -late_initcall(sharpsl_pm_init); -module_exit(sharpsl_pm_exit); diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index b2a781d..887c6eb 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq) writel(1 << irq, base + VIC_INT_ENABLE); } +/** + * vic_init2 - common initialisation code + * @base: Base of the VIC. + * + * Common initialisation code for registeration + * and resume. +*/ +static void vic_init2(void __iomem *base) +{ + int i; + + for (i = 0; i < 16; i++) { + void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); + writel(VIC_VECT_CNTL_ENABLE | i, reg); + } + + writel(32, base + VIC_PL190_DEF_VECT_ADDR); +} + +#if defined(CONFIG_PM) +/** + * struct vic_device - VIC PM device + * @sysdev: The system device which is registered. + * @irq: The IRQ number for the base of the VIC. + * @base: The register base for the VIC. + * @resume_sources: A bitmask of interrupts for resume. + * @resume_irqs: The IRQs enabled for resume. + * @int_select: Save for VIC_INT_SELECT. + * @int_enable: Save for VIC_INT_ENABLE. + * @soft_int: Save for VIC_INT_SOFT. + * @protect: Save for VIC_PROTECT. + */ +struct vic_device { + struct sys_device sysdev; + + void __iomem *base; + int irq; + u32 resume_sources; + u32 resume_irqs; + u32 int_select; + u32 int_enable; + u32 soft_int; + u32 protect; +}; + +/* we cannot allocate memory when VICs are initially registered */ +static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; + +static inline struct vic_device *to_vic(struct sys_device *sys) +{ + return container_of(sys, struct vic_device, sysdev); +} + +static int vic_id; + +static int vic_class_resume(struct sys_device *dev) +{ + struct vic_device *vic = to_vic(dev); + void __iomem *base = vic->base; + + printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); + + /* re-initialise static settings */ + vic_init2(base); + + writel(vic->int_select, base + VIC_INT_SELECT); + writel(vic->protect, base + VIC_PROTECT); + + /* set the enabled ints and then clear the non-enabled */ + writel(vic->int_enable, base + VIC_INT_ENABLE); + writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR); + + /* and the same for the soft-int register */ + + writel(vic->soft_int, base + VIC_INT_SOFT); + writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); + + return 0; +} + +static int vic_class_suspend(struct sys_device *dev, pm_message_t state) +{ + struct vic_device *vic = to_vic(dev); + void __iomem *base = vic->base; + + printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); + + vic->int_select = readl(base + VIC_INT_SELECT); + vic->int_enable = readl(base + VIC_INT_ENABLE); + vic->soft_int = readl(base + VIC_INT_SOFT); + vic->protect = readl(base + VIC_PROTECT); + + /* set the interrupts (if any) that are used for + * resuming the system */ + + writel(vic->resume_irqs, base + VIC_INT_ENABLE); + writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); + + return 0; +} + +struct sysdev_class vic_class = { + .name = "vic", + .suspend = vic_class_suspend, + .resume = vic_class_resume, +}; + +/** + * vic_pm_register - Register a VIC for later power management control + * @base: The base address of the VIC. + * @irq: The base IRQ for the VIC. + * @resume_sources: bitmask of interrupts allowed for resume sources. + * + * Register the VIC with the system device tree so that it can be notified + * of suspend and resume requests and ensure that the correct actions are + * taken to re-instate the settings on resume. + */ +static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources) +{ + struct vic_device *v; + + if (vic_id >= ARRAY_SIZE(vic_devices)) + printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); + else { + v = &vic_devices[vic_id]; + v->base = base; + v->resume_sources = resume_sources; + v->irq = irq; + vic_id++; + } +} + +/** + * vic_pm_init - initicall to register VIC pm + * + * This is called via late_initcall() to register + * the resources for the VICs due to the early + * nature of the VIC's registration. +*/ +static int __init vic_pm_init(void) +{ + struct vic_device *dev = vic_devices; + int err; + int id; + + if (vic_id == 0) + return 0; + + err = sysdev_class_register(&vic_class); + if (err) { + printk(KERN_ERR "%s: cannot register class\n", __func__); + return err; + } + + for (id = 0; id < vic_id; id++, dev++) { + dev->sysdev.id = id; + dev->sysdev.cls = &vic_class; + + err = sysdev_register(&dev->sysdev); + if (err) { + printk(KERN_ERR "%s: failed to register device\n", + __func__); + return err; + } + } + + return 0; +} + +late_initcall(vic_pm_init); + +static struct vic_device *vic_from_irq(unsigned int irq) +{ + struct vic_device *v = vic_devices; + unsigned int base_irq = irq & ~31; + int id; + + for (id = 0; id < vic_id; id++, v++) { + if (v->irq == base_irq) + return v; + } + + return NULL; +} + +static int vic_set_wake(unsigned int irq, unsigned int on) +{ + struct vic_device *v = vic_from_irq(irq); + unsigned int off = irq & 31; + + if (!v) + return -EINVAL; + + if (on) + v->resume_irqs |= 1 << off; + else + v->resume_irqs &= ~(1 << off); + + return 0; +} + +#else +static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { } + +#define vic_set_wake NULL +#endif /* CONFIG_PM */ + static struct irq_chip vic_chip = { .name = "VIC", .ack = vic_mask_irq, .mask = vic_mask_irq, .unmask = vic_unmask_irq, + .set_wake = vic_set_wake, }; /** @@ -51,9 +260,10 @@ static struct irq_chip vic_chip = { * @base: iomem base address * @irq_start: starting interrupt number, must be muliple of 32 * @vic_sources: bitmask of interrupt sources to allow + * @resume_sources: bitmask of interrupt sources to allow for resume */ void __init vic_init(void __iomem *base, unsigned int irq_start, - u32 vic_sources) + u32 vic_sources, u32 resume_sources) { unsigned int i; @@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, writel(value, base + VIC_PL190_VECT_ADDR); } - for (i = 0; i < 16; i++) { - void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); - writel(VIC_VECT_CNTL_ENABLE | i, reg); - } - - writel(32, base + VIC_PL190_DEF_VECT_ADDR); + vic_init2(base); for (i = 0; i < 32; i++) { if (vic_sources & (1 << i)) { @@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } + + vic_pm_register(base, irq_start, resume_sources); } diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 227da08..d18d21b 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc3 -# Tue Aug 19 11:26:54 2008 +# Linux kernel version: 2.6.30-rc8 +# Thu Jun 4 09:53:21 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 @@ -44,15 +42,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -61,31 +68,37 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -93,19 +106,13 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -113,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -133,7 +137,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -143,10 +147,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -167,14 +171,17 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Intel PXA2xx/PXA3xx Implementations @@ -187,16 +194,24 @@ CONFIG_CPU_PXA300=y # CONFIG_CPU_PXA310 is not set # CONFIG_CPU_PXA320 is not set # CONFIG_CPU_PXA930 is not set +# CONFIG_CPU_PXA935 is not set # CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_VIPER is not set # CONFIG_ARCH_PXA_ESERIES is not set -# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set # CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set # CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_COLIBRI300 is not set +# CONFIG_MACH_COLIBRI320 is not set # CONFIG_MACH_ZYLONITE is not set # CONFIG_MACH_LITTLETON is not set # CONFIG_MACH_TAVOREVB is not set @@ -204,19 +219,15 @@ CONFIG_CPU_PXA300=y # CONFIG_MACH_ARMCORE is not set CONFIG_MACH_CM_X300=y # CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_MIOA701 is not set # CONFIG_MACH_PCM027 is not set # CONFIG_ARCH_PXA_PALM is not set +# CONFIG_MACH_CSB726 is not set # CONFIG_PXA_EZX is not set CONFIG_PXA3xx=y # CONFIG_PXA_PWM is not set - -# -# Boot options -# - -# -# Power management -# +CONFIG_PLAT_PXA=y # # Processor Type @@ -241,6 +252,7 @@ CONFIG_IO_36=y CONFIG_OUTER_CACHE=y CONFIG_CACHE_XSC3L2=y CONFIG_IWMMXT=y +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -256,25 +268,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -287,7 +307,7 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400" # CONFIG_KEXEC is not set # -# CPU Frequency scaling +# CPU Power Management # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y @@ -304,6 +324,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -320,6 +341,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -376,6 +399,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -385,7 +409,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -407,8 +433,7 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set # CONFIG_BT_HCIBCM203X is not set @@ -416,19 +441,15 @@ CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +# CONFIG_LIB80211_DEBUG is not set # CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -453,6 +474,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set @@ -494,7 +516,6 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_SHARP_SL is not set # CONFIG_MTD_PLATRAM is not set # @@ -516,16 +537,23 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_SHARPSL is not set CONFIG_MTD_NAND_PXA3xx=y +# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -585,11 +613,15 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -604,11 +636,17 @@ CONFIG_MII=y CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=0 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -624,10 +662,13 @@ CONFIG_LIBERTAS_SDIO=m # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_HOSTAP is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -677,18 +718,21 @@ CONFIG_KEYBOARD_PXA27x=m # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -721,10 +765,10 @@ CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set @@ -763,12 +807,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -782,6 +822,10 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -798,12 +842,14 @@ CONFIG_GPIO_PCA953X=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -811,12 +857,19 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -842,6 +895,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -862,12 +916,15 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set # CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set # CONFIG_FB_W100 is not set -# CONFIG_FB_AM200EPD is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -899,9 +956,11 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set @@ -916,12 +975,15 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_LIB=m # CONFIG_SND_PXA2XX_AC97 is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=m CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -932,9 +994,39 @@ CONFIG_HID_DEBUG=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -952,11 +1044,14 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -965,6 +1060,7 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # @@ -973,20 +1069,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -994,7 +1090,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1015,6 +1110,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1022,7 +1118,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1031,13 +1126,20 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y @@ -1045,10 +1147,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_PXA=m # CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1057,7 +1161,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1065,7 +1172,13 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1096,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1105,28 +1219,27 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +CONFIG_RTC_DRV_V3020=y # # on-CPU RTC drivers # CONFIG_RTC_DRV_SA1100=y +# CONFIG_RTC_DRV_PXA is not set # CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1135,15 +1248,18 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1153,6 +1269,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1173,15 +1294,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1201,6 +1320,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1209,6 +1329,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1313,6 +1434,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1329,6 +1451,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set @@ -1336,22 +1459,38 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1363,17 +1502,28 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1442,15 +1592,21 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1460,7 +1616,10 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index eb2738b..ac18662 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Wed Apr 15 08:16:53 2009 +# Linux kernel version: 2.6.30-rc7 +# Tue May 26 07:24:28 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_MSM is not set # CONFIG_ARCH_W90X900 is not set +CONFIG_AINTC=y # # TI DaVinci Implementations @@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y # DaVinci Core Type # CONFIG_ARCH_DAVINCI_DM644x=y +CONFIG_ARCH_DAVINCI_DM355=y +CONFIG_ARCH_DAVINCI_DM646x=y # # DaVinci Board Type # CONFIG_MACH_DAVINCI_EVM=y +CONFIG_MACH_SFFSDR=y +CONFIG_MACH_DAVINCI_DM355_EVM=y +CONFIG_MACH_DM355_LEOPARD=y +CONFIG_MACH_DAVINCI_DM6467_EVM=y CONFIG_DAVINCI_MUX=y CONFIG_DAVINCI_MUX_DEBUG=y CONFIG_DAVINCI_MUX_WARNINGS=y @@ -245,7 +252,7 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set +CONFIG_TI_DAVINCI_EMAC=y +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set @@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set +# CONFIG_MFD_DM355EVM_MSP is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set @@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_DAVINCI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y @@ -1778,6 +1790,7 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 3f89d5f..3fb083b 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -1,12 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc1 -# Sat Dec 16 06:05:24 2006 +# Linux kernel version: 2.6.30-rc3 +# Tue May 19 12:26:49 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -15,42 +22,54 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -58,31 +77,38 @@ CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,6 +122,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_FREEZER is not set # # System Type @@ -105,29 +132,40 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set CONFIG_ARCH_EP93XX=y # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # @@ -138,14 +176,24 @@ CONFIG_CRUNCH=y # # EP93xx Platforms # +# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set +CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y CONFIG_MACH_ADSSPHERE=y +CONFIG_MACH_EDB93XX=y +CONFIG_MACH_EDB9301=y CONFIG_MACH_EDB9302=y -CONFIG_MACH_EDB9302A=y +CONFIG_MACH_EDB9307=y CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y -CONFIG_MACH_EDB9315A=y CONFIG_MACH_GESBC9312=y +CONFIG_MACH_MICRO9=y +CONFIG_MACH_MICRO9H=y +CONFIG_MACH_MICRO9M=y +CONFIG_MACH_MICRO9L=y CONFIG_MACH_TS72XX=y +CONFIG_EP93XX_EARLY_UART1=y +# CONFIG_EP93XX_EARLY_UART2 is not set +# CONFIG_EP93XX_EARLY_UART3 is not set # # Processor Type @@ -154,6 +202,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y @@ -168,34 +217,47 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_COMMON_CLKDEV=y # # Bus support # CONFIG_ARM_AMBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=100 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -205,6 +267,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -221,32 +289,31 @@ CONFIG_FPE_NWFPE_XP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set - -# -# Networking -# +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -267,6 +334,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -276,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set @@ -289,25 +358,15 @@ CONFIG_IPV6=y # CONFIG_IPV6_SIT is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -317,20 +376,28 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -339,41 +406,39 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -404,16 +469,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -431,49 +493,58 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_TS7250=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_TS7250 is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support +# LPDDR flash memory drivers # +# CONFIG_MTD_LPDDR is not set # -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set @@ -495,6 +566,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -502,92 +574,71 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_EP93XX_ETH=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -605,6 +656,7 @@ CONFIG_EP93XX_ETH=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -621,104 +673,101 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_EP93XX_WATCHDOG=y - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# TPM devices +# I2C Hardware Bus support # -# CONFIG_TCG_TPM is not set # -# I2C support +# I2C system bus drivers (mostly embedded / system-on-chip) # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set # -# I2C Algorithms +# External I2C/SMBus adapter drivers # -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # -# I2C Hardware Bus support +# Other I2C/SMBus bus drivers # -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_EEPROM_LEGACY=y +# CONFIG_DS1682 is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# SPI support +# Memory mapped GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# I2C GPIO expanders: # -# CONFIG_W1 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # -# Hardware Monitoring support +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -732,158 +781,188 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_EP93XX_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# LED drivers +# Sonics Silicon Backplane # +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# - -# -# USB HID Boot Protocol drivers -# - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -CONFIG_USB_RTL8150=y -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -895,6 +974,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -902,16 +982,23 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -920,38 +1007,34 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -965,24 +1048,55 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_RTC_DRV_EP93XX=y +# CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -991,27 +1105,31 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1032,16 +1150,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1049,33 +1164,35 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -1087,7 +1204,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1109,10 +1225,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1153,49 +1266,83 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1204,21 +1351,115 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index dcf8153..0a1abb9 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y CONFIG_MACH_DB88F6281_BP=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y +CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_TS219=y CONFIG_PLAT_ORION=y @@ -270,7 +271,9 @@ CONFIG_CMDLINE="" # # CPU Power Management # -# CONFIG_CPU_IDLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Floating point emulation diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index f56837f..957fd5f 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y # CONFIG_MACH_SAAR is not set # CONFIG_MACH_ARMCORE is not set # CONFIG_MACH_CM_X300 is not set +CONFIG_MACH_H4700=y CONFIG_MACH_MAGICIAN=y # CONFIG_MACH_MIOA701 is not set # CONFIG_MACH_PCM027 is not set @@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set +CONFIG_MFD_ASIC3=y CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=y # CONFIG_TPS65010 is not set @@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y # CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set -# CONFIG_FB_W100 is not set +CONFIG_FB_W100=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig new file mode 100644 index 0000000..4b04290 --- /dev/null +++ b/arch/arm/configs/mx21_defconfig @@ -0,0 +1,1170 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc1 +# Tue Apr 14 16:58:09 2009 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set +CONFIG_MACH_MX21=y +# CONFIG_MACH_MX27 is not set + +# +# MX2 platforms: +# +CONFIG_MACH_MX21ADS=y +# CONFIG_MXC_IRQ_PRIOR is not set +CONFIG_MXC_PWM=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_CONSOLE_TRANSLATIONS is not set +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_IMX=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig new file mode 100644 index 0000000..28be17f --- /dev/null +++ b/arch/arm/configs/omap3_evm_defconfig @@ -0,0 +1,1528 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc5 +# Mon May 18 14:01:52 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +CONFIG_MACH_OMAP3EVM=y +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_OMAP_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMC911X=y +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=m +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig new file mode 100644 index 0000000..23e43ea --- /dev/null +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -0,0 +1,866 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc7 +# Tue Jun 9 12:36:23 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set +CONFIG_ARCH_OMAP4=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_4430SDP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_DCACHE_DISABLE=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_ARM_GIC=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_NR_CPUS=2 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_LOCAL_TIMERS=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set +CONFIG_HAVE_MLOCK=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig new file mode 100644 index 0000000..213fe9c --- /dev/null +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -0,0 +1,1211 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc5 +# Fri Oct 10 11:49:41 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +CONFIG_MACH_OMAP_ZOOM2=y +# CONFIG_MACH_OVERO is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 5b98f76..9e23852 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_TIMERIOMEM=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 593102d..eb2cb31 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5" +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig new file mode 100644 index 0000000..44461f1 --- /dev/null +++ b/arch/arm/configs/stmp378x_defconfig @@ -0,0 +1,1141 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 23 02:44:13 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-default" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set +# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_STMP3XXX=y + +# +# Freescale STMP3xxx implementations +# +# CONFIG_ARCH_STMP37XX is not set +CONFIG_ARCH_STMP378X=y +# CONFIG_MACH_STMP37XX is not set +CONFIG_MACH_STMP378X=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set +# CONFIG_MTD_TESTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=6144 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# + +# +# RDS decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# + +# +# Video improvement chips +# +# CONFIG_VIDEO_VIVI is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_SELFTEST=y +CONFIG_DEBUG_OBJECTS_FREE=y +CONFIG_DEBUG_OBJECTS_TIMERS=y +CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SLAB_LEAK=y +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_TRACE_IRQFLAGS=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +CONFIG_DEBUG_KOBJECT=y +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_EVENT_TRACER is not set +CONFIG_BOOT_TRACER=y +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_STACK_TRACER=y +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig new file mode 100644 index 0000000..401279d --- /dev/null +++ b/arch/arm/configs/stmp37xx_defconfig @@ -0,0 +1,1002 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29.1 +# Mon Apr 20 04:41:26 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-default" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_STMP3XXX=y + +# +# Freescale STMP3xxx implementations +# +CONFIG_ARCH_STMP37XX=y +# CONFIG_ARCH_STMP378X is not set +CONFIG_MACH_STMP37XX=y +# CONFIG_MACH_STMP378X is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=6144 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_STMP_DBG is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# + +# +# Video improvement chips +# +# CONFIG_VIDEO_VIVI is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_BOOT_TRACER=y +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_STACK_TRACER=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig new file mode 100644 index 0000000..2d827e1 --- /dev/null +++ b/arch/arm/configs/u300_defconfig @@ -0,0 +1,1115 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc6 +# Mon Jun 1 09:18:22 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_U300=y +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# ST-Ericsson AB U300/U330/U335/U365 Platform +# + +# +# ST-Ericsson Mobile Platform Products +# +CONFIG_MACH_U300=y + +# +# ST-Ericsson U300/U330/U335/U365 Feature Selections +# +# CONFIG_MACH_U300_BS2X is not set +# CONFIG_MACH_U300_BS330 is not set +CONFIG_MACH_U300_BS335=y +# CONFIG_MACH_U300_BS365 is not set +# CONFIG_MACH_U300_SINGLE_RAM is not set +CONFIG_MACH_U300_DUAL_RAM=y +CONFIG_U300_DEBUG=y +# CONFIG_MACH_U300_SEMI_IS_SHARED is not set + +# +# All the settings below must match the bootloader's settings +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_VIC=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_ARMMMCI=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PL030 is not set +# CONFIG_RTC_DRV_PL031 is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/w90p910_defconfig index 56bda7c..5245655 100644 --- a/arch/arm/configs/w90p910_defconfig +++ b/arch/arm/configs/w90p910_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc8-git8 -# Sat Nov 15 10:05:00 2008 +# Linux kernel version: 2.6.30 +# Wed Jun 10 22:09:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -42,10 +40,19 @@ CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y @@ -56,52 +63,53 @@ CONFIG_USER_NS=y # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set +# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_LSF=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -151,23 +159,17 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set CONFIG_ARCH_W90X900=y - -# -# Boot options -# - -# -# Power management -# CONFIG_CPU_W90P910=y # @@ -198,6 +200,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set # CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -209,27 +212,32 @@ CONFIG_ARM_THUMB=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -237,12 +245,17 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 initrd=0xa00000,4000000 mem=64M" +CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -258,6 +271,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -282,11 +297,93 @@ CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 @@ -300,9 +397,41 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set @@ -354,38 +483,57 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # -CONFIG_SERIAL_W90X900=y -# CONFIG_SERIAL_W90X900_PORT1 is not set -# CONFIG_SERIAL_W90X900_PORT2 is not set -# CONFIG_SERIAL_W90X900_PORT3 is not set -# CONFIG_SERIAL_W90X900_PORT4 is not set -CONFIG_SERIAL_W90X900_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -393,10 +541,11 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set # # Multimedia devices @@ -433,33 +582,131 @@ CONFIG_SSB_POSSIBLE=y CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -469,6 +716,11 @@ CONFIG_FS_POSIX_ACL=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -486,15 +738,13 @@ CONFIG_GENERIC_ACL=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -502,15 +752,22 @@ CONFIG_TMPFS_POSIX_ACL=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # # Partition Types @@ -586,18 +843,36 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -605,14 +880,15 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -620,7 +896,10 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 16b52f3..9e07fe5 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -249,6 +249,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define smp_mb__before_atomic_inc() smp_mb() #define smp_mb__after_atomic_inc() smp_mb() -#include +#include #endif #endif diff --git a/arch/arm/include/asm/bitsperlong.h b/arch/arm/include/asm/bitsperlong.h new file mode 100644 index 0000000..6dc0bb0 --- /dev/null +++ b/arch/arm/include/asm/bitsperlong.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index bb7d695..1a711ea 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -429,6 +429,14 @@ static inline void flush_anon_page(struct vm_area_struct *vma, __flush_anon_page(vma, page, vmaddr); } +#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE +static inline void flush_kernel_dcache_page(struct page *page) +{ + /* highmem pages are always flushed upon kunmap already */ + if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page)) + __cpuc_flush_dcache_page(page_address(page)); +} + #define flush_dcache_mmap_lock(mapping) \ spin_lock_irq(&(mapping)->tree_lock) #define flush_dcache_mmap_unlock(mapping) \ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 7b9d27e..b3e656c 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -8,6 +8,21 @@ #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 +#define CPUID_EXT_PFR0 "c1, 0" +#define CPUID_EXT_PFR1 "c1, 1" +#define CPUID_EXT_DFR0 "c1, 2" +#define CPUID_EXT_AFR0 "c1, 3" +#define CPUID_EXT_MMFR0 "c1, 4" +#define CPUID_EXT_MMFR1 "c1, 5" +#define CPUID_EXT_MMFR2 "c1, 6" +#define CPUID_EXT_MMFR3 "c1, 7" +#define CPUID_EXT_ISAR0 "c2, 0" +#define CPUID_EXT_ISAR1 "c2, 1" +#define CPUID_EXT_ISAR2 "c2, 2" +#define CPUID_EXT_ISAR3 "c2, 3" +#define CPUID_EXT_ISAR4 "c2, 4" +#define CPUID_EXT_ISAR5 "c2, 5" + #ifdef CONFIG_CPU_CP15 #define read_cpuid(reg) \ ({ \ @@ -18,9 +33,19 @@ : "cc"); \ __val; \ }) +#define read_cpuid_ext(ext_reg) \ + ({ \ + unsigned int __val; \ + asm("mrc p15, 0, %0, c0, " ext_reg \ + : "=r" (__val) \ + : \ + : "cc"); \ + __val; \ + }) #else extern unsigned int processor_id; #define read_cpuid(reg) (processor_id) +#define read_cpuid_ext(reg) 0 #endif /* diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h deleted file mode 100644 index e521b70..0000000 --- a/arch/arm/include/asm/hardware/arm_twd.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_HARDWARE_TWD_H -#define __ASM_HARDWARE_TWD_H - -#define TWD_TIMER_LOAD 0x00 -#define TWD_TIMER_COUNTER 0x04 -#define TWD_TIMER_CONTROL 0x08 -#define TWD_TIMER_INTSTAT 0x0C - -#define TWD_WDOG_LOAD 0x20 -#define TWD_WDOG_COUNTER 0x24 -#define TWD_WDOG_CONTROL 0x28 -#define TWD_WDOG_INTSTAT 0x2C -#define TWD_WDOG_RESETSTAT 0x30 -#define TWD_WDOG_DISABLE 0x34 - -#define TWD_TIMER_CONTROL_ENABLE (1 << 0) -#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) -#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) -#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) - -#endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 64f2252..cdb9022 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -24,6 +24,8 @@ #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 +#define L2X0_TAG_LATENCY_CTRL 0x108 +#define L2X0_DATA_LATENCY_CTRL 0x10C #define L2X0_EVENT_CNT_CTRL 0x200 #define L2X0_EVENT_CNT1_CFG 0x204 #define L2X0_EVENT_CNT0_CFG 0x208 diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h new file mode 100644 index 0000000..6a6c66b --- /dev/null +++ b/arch/arm/include/asm/hardware/pl080.h @@ -0,0 +1,138 @@ +/* arch/arm/include/asm/hardware/pl080.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * ARM PrimeCell PL080 DMA controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Note, there are some Samsung updates to this controller block which + * make it not entierly compatible with the PL080 specification from + * ARM. When in doubt, check the Samsung documentation first. + * + * The Samsung defines are PL080S, and add an extra controll register, + * the ability to move more than 2^11 counts of data and some extra + * OneNAND features. +*/ + +#define PL080_INT_STATUS (0x00) +#define PL080_TC_STATUS (0x04) +#define PL080_TC_CLEAR (0x08) +#define PL080_ERR_STATUS (0x0C) +#define PL080_ERR_CLEAR (0x10) +#define PL080_RAW_TC_STATUS (0x14) +#define PL080_RAW_ERR_STATUS (0x18) +#define PL080_EN_CHAN (0x1c) +#define PL080_SOFT_BREQ (0x20) +#define PL080_SOFT_SREQ (0x24) +#define PL080_SOFT_LBREQ (0x28) +#define PL080_SOFT_LSREQ (0x2C) + +#define PL080_CONFIG (0x30) +#define PL080_CONFIG_M2_BE (1 << 2) +#define PL080_CONFIG_M1_BE (1 << 1) +#define PL080_CONFIG_ENABLE (1 << 0) + +#define PL080_SYNC (0x34) + +/* Per channel configuration registers */ + +#define PL008_Cx_STRIDE (0x20) +#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20))) +#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20))) +#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20))) +#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20))) +#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20))) +#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20))) +#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20))) +#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20))) + +#define PL080_CH_SRC_ADDR (0x00) +#define PL080_CH_DST_ADDR (0x04) +#define PL080_CH_LLI (0x08) +#define PL080_CH_CONTROL (0x0C) +#define PL080_CH_CONFIG (0x10) +#define PL080S_CH_CONTROL2 (0x10) +#define PL080S_CH_CONFIG (0x14) + +#define PL080_LLI_ADDR_MASK (0x3fffffff << 2) +#define PL080_LLI_ADDR_SHIFT (2) +#define PL080_LLI_LM_AHB2 (1 << 0) + +#define PL080_CONTROL_TC_IRQ_EN (1 << 31) +#define PL080_CONTROL_PROT_MASK (0x7 << 28) +#define PL080_CONTROL_PROT_SHIFT (28) +#define PL080_CONTROL_PROT_SYS (1 << 28) +#define PL080_CONTROL_DST_INCR (1 << 27) +#define PL080_CONTROL_SRC_INCR (1 << 26) +#define PL080_CONTROL_DST_AHB2 (1 << 25) +#define PL080_CONTROL_SRC_AHB2 (1 << 24) +#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21) +#define PL080_CONTROL_DWIDTH_SHIFT (21) +#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18) +#define PL080_CONTROL_SWIDTH_SHIFT (18) +#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15) +#define PL080_CONTROL_DB_SIZE_SHIFT (15) +#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12) +#define PL080_CONTROL_SB_SIZE_SHIFT (12) +#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0) +#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0) + +#define PL080_BSIZE_1 (0x0) +#define PL080_BSIZE_4 (0x1) +#define PL080_BSIZE_8 (0x2) +#define PL080_BSIZE_16 (0x3) +#define PL080_BSIZE_32 (0x4) +#define PL080_BSIZE_64 (0x5) +#define PL080_BSIZE_128 (0x6) +#define PL080_BSIZE_256 (0x7) + +#define PL080_WIDTH_8BIT (0x0) +#define PL080_WIDTH_16BIT (0x1) +#define PL080_WIDTH_32BIT (0x2) + +#define PL080_CONFIG_HALT (1 << 18) +#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */ +#define PL080_CONFIG_LOCK (1 << 16) +#define PL080_CONFIG_TC_IRQ_MASK (1 << 15) +#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14) +#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11) +#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11) +#define PL080_CONFIG_DST_SEL_MASK (0xf << 6) +#define PL080_CONFIG_DST_SEL_SHIFT (6) +#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1) +#define PL080_CONFIG_SRC_SEL_SHIFT (1) +#define PL080_CONFIG_ENABLE (1 << 0) + +#define PL080_FLOW_MEM2MEM (0x0) +#define PL080_FLOW_MEM2PER (0x1) +#define PL080_FLOW_PER2MEM (0x2) +#define PL080_FLOW_SRC2DST (0x3) +#define PL080_FLOW_SRC2DST_DST (0x4) +#define PL080_FLOW_MEM2PER_PER (0x5) +#define PL080_FLOW_PER2MEM_PER (0x6) +#define PL080_FLOW_SRC2DST_SRC (0x7) + +/* DMA linked list chain structure */ + +struct pl080_lli { + u32 src_addr; + u32 dst_addr; + u32 next_lli; + u32 control0; +}; + +struct pl080s_lli { + u32 src_addr; + u32 dst_addr; + u32 next_lli; + u32 control0; + u32 control1; +}; + diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h deleted file mode 100644 index 2d00db2..0000000 --- a/arch/arm/include/asm/hardware/sharpsl_pm.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * SharpSL Battery/PM Driver - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -struct sharpsl_charger_machinfo { - void (*init)(void); - void (*exit)(void); - int gpio_acin; - int gpio_batfull; - int batfull_irq; - int gpio_batlock; - int gpio_fatal; - void (*discharge)(int); - void (*discharge1)(int); - void (*charge)(int); - void (*measure_temp)(int); - void (*presuspend)(void); - void (*postsuspend)(void); - void (*earlyresume)(void); - unsigned long (*read_devdata)(int); -#define SHARPSL_BATT_VOLT 1 -#define SHARPSL_BATT_TEMP 2 -#define SHARPSL_ACIN_VOLT 3 -#define SHARPSL_STATUS_ACIN 4 -#define SHARPSL_STATUS_LOCK 5 -#define SHARPSL_STATUS_CHRGFULL 6 -#define SHARPSL_STATUS_FATAL 7 - unsigned long (*charger_wakeup)(void); - int (*should_wakeup)(unsigned int resume_on_alarm); - void (*backlight_limit)(int); - int (*backlight_get_status) (void); - int charge_on_volt; - int charge_on_temp; - int charge_acin_high; - int charge_acin_low; - int fatal_acin_volt; - int fatal_noacin_volt; - int bat_levels; - struct battery_thresh *bat_levels_noac; - struct battery_thresh *bat_levels_acin; - struct battery_thresh *bat_levels_noac_bl; - struct battery_thresh *bat_levels_acin_bl; - int status_high_acin; - int status_low_acin; - int status_high_noac; - int status_low_noac; -}; - -struct battery_thresh { - int voltage; - int percentage; -}; - -struct battery_stat { - int ac_status; /* APM AC Present/Not Present */ - int mainbat_status; /* APM Main Battery Status */ - int mainbat_percent; /* Main Battery Percentage Charge */ - int mainbat_voltage; /* Main Battery Voltage */ -}; - -struct sharpsl_pm_status { - struct device *dev; - struct timer_list ac_timer; - struct timer_list chrg_full_timer; - - int charge_mode; -#define CHRG_ERROR (-1) -#define CHRG_OFF (0) -#define CHRG_ON (1) -#define CHRG_DONE (2) - - unsigned int flags; -#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ -#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ -#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ -#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ -#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ - - int full_count; - unsigned long charge_start_time; - struct sharpsl_charger_machinfo *machinfo; - struct battery_stat battstat; -}; - -extern struct sharpsl_pm_status sharpsl_pm; - - -#define SHARPSL_LED_ERROR 2 -#define SHARPSL_LED_ON 1 -#define SHARPSL_LED_OFF 0 - -void sharpsl_battery_kick(void); -void sharpsl_pm_led(int val); -irqreturn_t sharpsl_ac_isr(int irq, void *dev_id); -irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id); -irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id); - diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index f87328d..5d72550 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -41,7 +41,7 @@ #define VIC_PL192_VECT_ADDR 0xF00 #ifndef __ASSEMBLY__ -void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); +void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); #endif #endif diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h new file mode 100644 index 0000000..50c7e7c --- /dev/null +++ b/arch/arm/include/asm/localtimer.h @@ -0,0 +1,63 @@ +/* + * arch/arm/include/asm/localtimer.h + * + * Copyright (C) 2004-2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_LOCALTIMER_H +#define __ASM_ARM_LOCALTIMER_H + +struct clock_event_device; + +/* + * Setup a per-cpu timer, whether it be a local timer or dummy broadcast + */ +void percpu_timer_setup(void); + +/* + * Called from assembly, this is the local timer IRQ handler + */ +asmlinkage void do_local_timer(struct pt_regs *); + + +#ifdef CONFIG_LOCAL_TIMERS + +#ifdef CONFIG_HAVE_ARM_TWD + +#include "smp_twd.h" + +#define local_timer_ack() twd_timer_ack() +#define local_timer_stop() twd_timer_stop() + +#else + +/* + * Platform provides this to acknowledge a local timer IRQ. + * Returns true if the local timer IRQ is to be processed. + */ +int local_timer_ack(void); + +/* + * Stop a local timer interrupt. + */ +void local_timer_stop(void); + +#endif + +/* + * Setup a local timer interrupt for a CPU. + */ +void local_timer_setup(struct clock_event_device *); + +#else + +static inline void local_timer_stop(void) +{ +} + +#endif + +#endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 58cf91f..742c2aa 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -30,6 +30,14 @@ struct map_desc { #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); + +struct mem_type; +extern const struct mem_type *get_mem_type(unsigned int type); +/* + * external interface to remap single page with appropriate type + */ +extern int ioremap_page(unsigned long virt, unsigned long phys, + const struct mem_type *mtype); #else #define iotable_init(map,num) do { } while (0) #endif diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h index 54570d2..fc26976 100644 --- a/arch/arm/include/asm/mman.h +++ b/arch/arm/include/asm/mman.h @@ -1,7 +1,7 @@ #ifndef __ARM_MMAN_H__ #define __ARM_MMAN_H__ -#include +#include #define MAP_GROWSDOWN 0x0100 /* stack-like segment */ #define MAP_DENYWRITE 0x0800 /* ETXTBSY */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 7b52277..be962c1 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -202,6 +202,6 @@ typedef struct page *pgtable_t; (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -#include +#include #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 110295c..1cd2d64 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) return __va(ptr); } -#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) /* * Conversion functions: convert a page and protection to a page entry, diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 1845892..6a89567 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -71,6 +71,7 @@ struct thread_struct { regs->ARM_cpsr = USR26_MODE; \ if (elf_hwcap & HWCAP_THUMB && pc & 1) \ regs->ARM_cpsr |= PSR_T_BIT; \ + regs->ARM_cpsr |= PSR_ENDSTATE; \ regs->ARM_pc = pc & ~1; /* pc */ \ regs->ARM_sp = sp; /* sp */ \ regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 236a06b..67b833c 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -50,6 +50,7 @@ #define PSR_F_BIT 0x00000040 #define PSR_I_BIT 0x00000080 #define PSR_A_BIT 0x00000100 +#define PSR_E_BIT 0x00000200 #define PSR_J_BIT 0x01000000 #define PSR_Q_BIT 0x08000000 #define PSR_V_BIT 0x10000000 @@ -65,6 +66,22 @@ #define PSR_x 0x0000ff00 /* Extension */ #define PSR_c 0x000000ff /* Control */ +/* + * ARMv7 groups of APSR bits + */ +#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */ +#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */ +#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */ + +/* + * Default endianness state + */ +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define PSR_ENDSTATE PSR_E_BIT +#else +#define PSR_ENDSTATE 0 +#endif + #ifndef __ASSEMBLY__ /* diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index d0fb487..43ba0fb 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -111,7 +111,7 @@ typedef unsigned long sigset_t; #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 -#include +#include #ifdef __KERNEL__ struct old_sigaction { diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index ada93a8..4fc1565 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -29,6 +29,7 @@ #define SZ_512 0x00000200 #define SZ_1K 0x00000400 +#define SZ_2K 0x00000800 #define SZ_4K 0x00001000 #define SZ_8K 0x00002000 #define SZ_16K 0x00004000 diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 5995935..a06e735 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p); asmlinkage void do_IPI(struct pt_regs *regs); /* - * Setup the SMP cpu_possible_map + * Setup the set of possible CPUs (via set_cpu_possible) */ extern void smp_init_cpus(void); @@ -56,11 +56,6 @@ extern void smp_store_cpu_info(unsigned int cpuid); extern void smp_cross_call(const struct cpumask *mask); /* - * Broadcast a clock event to other CPUs. - */ -extern void smp_timer_broadcast(const struct cpumask *mask); - -/* * Boot a secondary CPU, and assign it the specified idle task. * This also gives us the initial stack to use for this CPU. */ @@ -101,43 +96,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask /* - * Local timer interrupt handling function (can be IPI'ed). - */ -extern void local_timer_interrupt(void); - -#ifdef CONFIG_LOCAL_TIMERS - -/* - * Stop a local timer interrupt. - */ -extern void local_timer_stop(void); - -/* - * Platform provides this to acknowledge a local timer IRQ - */ -extern int local_timer_ack(void); - -#else - -static inline void local_timer_stop(void) -{ -} - -#endif - -/* - * Setup a local timer interrupt for a CPU. - */ -extern void local_timer_setup(void); - -/* * show local interrupt info */ extern void show_local_irqs(struct seq_file *); -/* - * Called from assembly, this is the local timer IRQ handler - */ -asmlinkage void do_local_timer(struct pt_regs *); - #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h new file mode 100644 index 0000000..2376835 --- /dev/null +++ b/arch/arm/include/asm/smp_scu.h @@ -0,0 +1,7 @@ +#ifndef __ASMARM_ARCH_SCU_H +#define __ASMARM_ARCH_SCU_H + +unsigned int scu_get_core_count(void __iomem *); +void scu_enable(void __iomem *); + +#endif diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h new file mode 100644 index 0000000..7be0978 --- /dev/null +++ b/arch/arm/include/asm/smp_twd.h @@ -0,0 +1,12 @@ +#ifndef __ASMARM_SMP_TWD_H +#define __ASMARM_SMP_TWD_H + +struct clock_event_device; + +extern void __iomem *twd_base; + +void twd_timer_stop(void); +int twd_timer_ack(void); +void twd_timer_setup(struct clock_event_device *); + +#endif diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h deleted file mode 100644 index cf0d0bd..0000000 --- a/arch/arm/include/asm/suspend.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASMARM_SUSPEND_H -#define _ASMARM_SUSPEND_H - -#endif diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index a622180..c964f3f 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -40,6 +40,12 @@ #define TLB_V6_I_ASID (1 << 18) #define TLB_BTB (1 << 28) + +/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */ +#define TLB_V7_UIS_PAGE (1 << 19) +#define TLB_V7_UIS_FULL (1 << 20) +#define TLB_V7_UIS_ASID (1 << 21) + #define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ #define TLB_DCLEAN (1 << 30) #define TLB_WB (1 << 31) @@ -176,9 +182,17 @@ # define v6wbi_always_flags (-1UL) #endif +#ifdef CONFIG_SMP +#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ + TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) +#else +#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ + TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID) +#endif + #ifdef CONFIG_CPU_TLB_V7 -# define v7wbi_possible_flags v6wbi_tlb_flags -# define v7wbi_always_flags v6wbi_tlb_flags +# define v7wbi_possible_flags v7wbi_tlb_flags +# define v7wbi_always_flags v7wbi_tlb_flags # ifdef _TLB # define MULTI_TLB 1 # else @@ -316,6 +330,8 @@ static inline void local_flush_tlb_all(void) asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V7_UIS_FULL)) + asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ @@ -351,6 +367,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); if (tlb_flag(TLB_V6_I_ASID)) asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); + if (tlb_flag(TLB_V7_UIS_ASID)) + asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc"); if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ @@ -389,6 +407,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_V6_I_PAGE)) asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V7_UIS_PAGE)) + asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ @@ -424,6 +444,8 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_V6_I_PAGE)) asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V7_UIS_PAGE)) + asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 7897464..0da9bc9 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -386,7 +386,9 @@ do { \ #ifdef CONFIG_MMU extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n); extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n); +extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n); extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n); +extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n); #else #define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) #define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 11a5197..ff89d0b 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o +obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 83b1da6..fc8af43 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -482,6 +482,9 @@ __und_usr: subeq r4, r2, #4 @ ARM instr at LR - 4 subne r4, r2, #2 @ Thumb instr at LR - 2 1: ldreqt r0, [r4] +#ifdef CONFIG_CPU_ENDIAN_BE8 + reveq r0, r0 @ little endian instruction +#endif beq call_fpe @ Thumb instruction #if __LINUX_ARM_ARCH__ >= 7 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index b55cb03..366e509 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -210,6 +210,9 @@ ENTRY(vector_swi) A710( teq ip, #0x0f000000 ) A710( bne .Larm710bug ) #endif +#ifdef CONFIG_CPU_ENDIAN_BE8 + rev r10, r10 @ little endian instruction +#endif #elif defined(CONFIG_AEABI) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index c3265a2..1585423 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -365,7 +365,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.ARM_r2 = (unsigned long)fn; regs.ARM_r3 = (unsigned long)do_exit; regs.ARM_pc = (unsigned long)kernel_thread_helper; - regs.ARM_cpsr = SVC_MODE; + regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE; return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 80b8b5c..93bb424 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -426,9 +426,13 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, */ thumb = handler & 1; - if (thumb) + if (thumb) { cpsr |= PSR_T_BIT; - else +#if __LINUX_ARM_ARCH__ >= 7 + /* clear the If-Then Thumb-2 execution state */ + cpsr &= ~PSR_IT_MASK; +#endif + } else cpsr &= ~PSR_T_BIT; } #endif @@ -532,7 +536,7 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, return err; } -static inline void restart_syscall(struct pt_regs *regs) +static inline void setup_syscall_restart(struct pt_regs *regs) { regs->ARM_r0 = regs->ARM_ORIG_r0; regs->ARM_pc -= thumb_mode(regs) ? 2 : 4; @@ -567,7 +571,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, } /* fallthrough */ case -ERESTARTNOINTR: - restart_syscall(regs); + setup_syscall_restart(regs); } } @@ -691,7 +695,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) if (regs->ARM_r0 == -ERESTARTNOHAND || regs->ARM_r0 == -ERESTARTSYS || regs->ARM_r0 == -ERESTARTNOINTR) { - restart_syscall(regs); + setup_syscall_restart(regs); } } single_step_set(current); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 6014dfd..de885fd 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -22,16 +22,20 @@ #include #include #include +#include +#include #include #include #include +#include #include #include #include #include #include #include +#include /* * as from 2.5, kernels no longer have an init_tasks structure @@ -163,7 +167,7 @@ int __cpuexit __cpu_disable(void) * Take this CPU offline. Once we clear this, we can't return, * and we must not schedule until we're ready to give up the cpu. */ - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); /* * OK - migrate IRQs away from this CPU @@ -274,9 +278,9 @@ asmlinkage void __cpuinit secondary_start_kernel(void) local_fiq_enable(); /* - * Setup local timer for this CPU. + * Setup the percpu timer for this CPU. */ - local_timer_setup(); + percpu_timer_setup(); calibrate_delay(); @@ -285,7 +289,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * OK, now it's safe to let the boot CPU continue */ - cpu_set(cpu, cpu_online_map); + set_cpu_online(cpu, true); /* * OK, it's off to the idle thread for us @@ -383,10 +387,16 @@ void show_local_irqs(struct seq_file *p) seq_putc(p, '\n'); } +/* + * Timer (local or broadcast) support + */ +static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); + static void ipi_timer(void) { + struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent); irq_enter(); - local_timer_interrupt(); + evt->event_handler(evt); irq_exit(); } @@ -405,6 +415,42 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs) } #endif +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST +static void smp_timer_broadcast(const struct cpumask *mask) +{ + send_ipi_message(mask, IPI_TIMER); +} + +static void broadcast_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ +} + +static void local_timer_setup(struct clock_event_device *evt) +{ + evt->name = "dummy_timer"; + evt->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DUMMY; + evt->rating = 400; + evt->mult = 1; + evt->set_mode = broadcast_timer_set_mode; + evt->broadcast = smp_timer_broadcast; + + clockevents_register_device(evt); +} +#endif + +void __cpuinit percpu_timer_setup(void) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); + + evt->cpumask = cpumask_of(cpu); + + local_timer_setup(evt); +} + static DEFINE_SPINLOCK(stop_lock); /* @@ -417,7 +463,7 @@ static void ipi_cpu_stop(unsigned int cpu) dump_stack(); spin_unlock(&stop_lock); - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); local_fiq_disable(); local_irq_disable(); @@ -501,11 +547,6 @@ void smp_send_reschedule(int cpu) send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); } -void smp_timer_broadcast(const struct cpumask *mask) -{ - send_ipi_message(mask, IPI_TIMER); -} - void smp_send_stop(void) { cpumask_t mask = cpu_online_map; @@ -545,6 +586,12 @@ struct tlb_args { unsigned long ta_end; }; +/* all SMP configurations have the extended CPUID registers */ +static inline int tlb_ops_need_broadcast(void) +{ + return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2; +} + static inline void ipi_flush_tlb_all(void *ignored) { local_flush_tlb_all(); @@ -587,51 +634,61 @@ static inline void ipi_flush_tlb_kernel_range(void *arg) void flush_tlb_all(void) { - on_each_cpu(ipi_flush_tlb_all, NULL, 1); + if (tlb_ops_need_broadcast()) + on_each_cpu(ipi_flush_tlb_all, NULL, 1); + else + local_flush_tlb_all(); } void flush_tlb_mm(struct mm_struct *mm) { - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); + if (tlb_ops_need_broadcast()) + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); + else + local_flush_tlb_mm(mm); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { - struct tlb_args ta; - - ta.ta_vma = vma; - ta.ta_start = uaddr; - - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); + if (tlb_ops_need_broadcast()) { + struct tlb_args ta; + ta.ta_vma = vma; + ta.ta_start = uaddr; + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); + } else + local_flush_tlb_page(vma, uaddr); } void flush_tlb_kernel_page(unsigned long kaddr) { - struct tlb_args ta; - - ta.ta_start = kaddr; - - on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1); + if (tlb_ops_need_broadcast()) { + struct tlb_args ta; + ta.ta_start = kaddr; + on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1); + } else + local_flush_tlb_kernel_page(kaddr); } void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - struct tlb_args ta; - - ta.ta_vma = vma; - ta.ta_start = start; - ta.ta_end = end; - - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); + if (tlb_ops_need_broadcast()) { + struct tlb_args ta; + ta.ta_vma = vma; + ta.ta_start = start; + ta.ta_end = end; + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); + } else + local_flush_tlb_range(vma, start, end); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) { - struct tlb_args ta; - - ta.ta_start = start; - ta.ta_end = end; - - on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); + if (tlb_ops_need_broadcast()) { + struct tlb_args ta; + ta.ta_start = start; + ta.ta_end = end; + on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); + } else + local_flush_tlb_kernel_range(start, end); } diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c new file mode 100644 index 0000000..d3831f6 --- /dev/null +++ b/arch/arm/kernel/smp_scu.c @@ -0,0 +1,48 @@ +/* + * linux/arch/arm/kernel/smp_scu.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +#include +#include + +#define SCU_CTRL 0x00 +#define SCU_CONFIG 0x04 +#define SCU_CPU_STATUS 0x08 +#define SCU_INVALIDATE 0x0c +#define SCU_FPGA_REVISION 0x10 + +/* + * Get the number of CPU cores from the SCU configuration + */ +unsigned int __init scu_get_core_count(void __iomem *scu_base) +{ + unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG); + return (ncores & 0x03) + 1; +} + +/* + * Enable the SCU + */ +void __init scu_enable(void __iomem *scu_base) +{ + u32 scu_ctrl; + + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + scu_ctrl |= 1; + __raw_writel(scu_ctrl, scu_base + SCU_CTRL); + + /* + * Ensure that the data accessed by CPU0 before the SCU was + * initialised is visible to the other CPUs. + */ + flush_cache_all(); +} diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c new file mode 100644 index 0000000..d8c88c6 --- /dev/null +++ b/arch/arm/kernel/smp_twd.c @@ -0,0 +1,175 @@ +/* + * linux/arch/arm/kernel/smp_twd.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define TWD_TIMER_LOAD 0x00 +#define TWD_TIMER_COUNTER 0x04 +#define TWD_TIMER_CONTROL 0x08 +#define TWD_TIMER_INTSTAT 0x0C + +#define TWD_WDOG_LOAD 0x20 +#define TWD_WDOG_COUNTER 0x24 +#define TWD_WDOG_CONTROL 0x28 +#define TWD_WDOG_INTSTAT 0x2C +#define TWD_WDOG_RESETSTAT 0x30 +#define TWD_WDOG_DISABLE 0x34 + +#define TWD_TIMER_CONTROL_ENABLE (1 << 0) +#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) +#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) +#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) + +/* set up by the platform code */ +void __iomem *twd_base; + +static unsigned long twd_timer_rate; + +static void twd_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + unsigned long ctrl; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* timer load already set up */ + ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE + | TWD_TIMER_CONTROL_PERIODIC; + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT; + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + ctrl = 0; + } + + __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); +} + +static int twd_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + + ctrl |= TWD_TIMER_CONTROL_ENABLE; + + __raw_writel(evt, twd_base + TWD_TIMER_COUNTER); + __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); + + return 0; +} + +/* + * local_timer_ack: checks for a local timer interrupt. + * + * If a local timer interrupt has occurred, acknowledge and return 1. + * Otherwise, return 0. + */ +int twd_timer_ack(void) +{ + if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { + __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + return 1; + } + + return 0; +} + +static void __cpuinit twd_calibrate_rate(void) +{ + unsigned long load, count; + u64 waitjiffies; + + /* + * If this is the first time round, we need to work out how fast + * the timer ticks + */ + if (twd_timer_rate == 0) { + printk(KERN_INFO "Calibrating local timer... "); + + /* Wait for a tick to start */ + waitjiffies = get_jiffies_64() + 1; + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + /* OK, now the tick has started, let's get the timer going */ + waitjiffies += 5; + + /* enable, no interrupt or reload */ + __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL); + + /* maximum value */ + __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + count = __raw_readl(twd_base + TWD_TIMER_COUNTER); + + twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); + + printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, + (twd_timer_rate / 100000) % 100); + } + + load = twd_timer_rate / HZ; + + __raw_writel(load, twd_base + TWD_TIMER_LOAD); +} + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit twd_timer_setup(struct clock_event_device *clk) +{ + unsigned long flags; + + twd_calibrate_rate(); + + clk->name = "local_timer"; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + clk->rating = 350; + clk->set_mode = twd_set_mode; + clk->set_next_event = twd_set_next_event; + clk->shift = 20; + clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift); + clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); + clk->min_delta_ns = clockevent_delta2ns(0xf, clk); + + /* Make sure our local interrupt controller has this enabled */ + local_irq_save(flags); + get_irq_chip(clk->irq)->unmask(clk->irq); + local_irq_restore(flags); + + clockevents_register_device(clk); +} + +/* + * take a local timer down + */ +void __cpuexit twd_timer_stop(void) +{ + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); +} diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index c90f272..6c07797 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -141,6 +141,7 @@ SECTIONS .data : AT(__data_loc) { _data = .; /* address in memory */ + _sdata = .; /* * first, the init task union, aligned @@ -192,6 +193,7 @@ SECTIONS __bss_start = .; /* BSS */ *(.bss) *(COMMON) + __bss_stop = .; _end = .; } /* Stabs debugging sections. */ diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 866f84a..030ba72 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -29,6 +29,9 @@ else endif endif +# using lib_ here won't override already available weak symbols +obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o + lib-$(CONFIG_MMU) += $(mmu-y) ifeq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 4d6bc71..844f567 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -18,7 +18,8 @@ * : sz - number of bytes to clear * Returns : number of bytes NOT cleared */ -ENTRY(__clear_user) +ENTRY(__clear_user_std) +WEAK(__clear_user) stmfd sp!, {r1, lr} mov r2, #0 cmp r1, #4 diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index 22f968b..878820f 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -86,7 +86,8 @@ .text -ENTRY(__copy_to_user) +ENTRY(__copy_to_user_std) +WEAK(__copy_to_user) #include "copy_template.S" diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c new file mode 100644 index 0000000..6b967ff --- /dev/null +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -0,0 +1,228 @@ +/* + * linux/arch/arm/lib/uaccess_with_memcpy.c + * + * Written by: Lennert Buytenhek and Nicolas Pitre + * Copyright (C) 2009 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include /* for in_atomic() */ +#include +#include + +static int +pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) +{ + unsigned long addr = (unsigned long)_addr; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + spinlock_t *ptl; + + pgd = pgd_offset(current->mm, addr); + if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) + return 0; + + pmd = pmd_offset(pgd, addr); + if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd))) + return 0; + + pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl); + if (unlikely(!pte_present(*pte) || !pte_young(*pte) || + !pte_write(*pte) || !pte_dirty(*pte))) { + pte_unmap_unlock(pte, ptl); + return 0; + } + + *ptep = pte; + *ptlp = ptl; + + return 1; +} + +static unsigned long noinline +__copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) +{ + int atomic; + + if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { + memcpy((void *)to, from, n); + return 0; + } + + /* the mmap semaphore is taken only if not in an atomic context */ + atomic = in_atomic(); + + if (!atomic) + down_read(¤t->mm->mmap_sem); + while (n) { + pte_t *pte; + spinlock_t *ptl; + int tocopy; + + while (!pin_page_for_write(to, &pte, &ptl)) { + if (!atomic) + up_read(¤t->mm->mmap_sem); + if (__put_user(0, (char __user *)to)) + goto out; + if (!atomic) + down_read(¤t->mm->mmap_sem); + } + + tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1; + if (tocopy > n) + tocopy = n; + + memcpy((void *)to, from, tocopy); + to += tocopy; + from += tocopy; + n -= tocopy; + + pte_unmap_unlock(pte, ptl); + } + if (!atomic) + up_read(¤t->mm->mmap_sem); + +out: + return n; +} + +unsigned long +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + /* + * This test is stubbed out of the main function above to keep + * the overhead for small copies low by avoiding a large + * register dump on the stack just to reload them right away. + * With frame pointer disabled, tail call optimization kicks in + * as well making this test almost invisible. + */ + if (n < 64) + return __copy_to_user_std(to, from, n); + return __copy_to_user_memcpy(to, from, n); +} + +static unsigned long noinline +__clear_user_memset(void __user *addr, unsigned long n) +{ + if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { + memset((void *)addr, 0, n); + return 0; + } + + down_read(¤t->mm->mmap_sem); + while (n) { + pte_t *pte; + spinlock_t *ptl; + int tocopy; + + while (!pin_page_for_write(addr, &pte, &ptl)) { + up_read(¤t->mm->mmap_sem); + if (__put_user(0, (char __user *)addr)) + goto out; + down_read(¤t->mm->mmap_sem); + } + + tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1; + if (tocopy > n) + tocopy = n; + + memset((void *)addr, 0, tocopy); + addr += tocopy; + n -= tocopy; + + pte_unmap_unlock(pte, ptl); + } + up_read(¤t->mm->mmap_sem); + +out: + return n; +} + +unsigned long __clear_user(void __user *addr, unsigned long n) +{ + /* See rational for this in __copy_to_user() above. */ + if (n < 64) + return __clear_user_std(addr, n); + return __clear_user_memset(addr, n); +} + +#if 0 + +/* + * This code is disabled by default, but kept around in case the chosen + * thresholds need to be revalidated. Some overhead (small but still) + * would be implied by a runtime determined variable threshold, and + * so far the measurement on concerned targets didn't show a worthwhile + * variation. + * + * Note that a fairly precise sched_clock() implementation is needed + * for results to make some sense. + */ + +#include + +static int __init test_size_treshold(void) +{ + struct page *src_page, *dst_page; + void *user_ptr, *kernel_ptr; + unsigned long long t0, t1, t2; + int size, ret; + + ret = -ENOMEM; + src_page = alloc_page(GFP_KERNEL); + if (!src_page) + goto no_src; + dst_page = alloc_page(GFP_KERNEL); + if (!dst_page) + goto no_dst; + kernel_ptr = page_address(src_page); + user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010)); + if (!user_ptr) + goto no_vmap; + + /* warm up the src page dcache */ + ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE); + + for (size = PAGE_SIZE; size >= 4; size /= 2) { + t0 = sched_clock(); + ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size); + t1 = sched_clock(); + ret |= __copy_to_user_std(user_ptr, kernel_ptr, size); + t2 = sched_clock(); + printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1); + } + + for (size = PAGE_SIZE; size >= 4; size /= 2) { + t0 = sched_clock(); + ret |= __clear_user_memset(user_ptr, size); + t1 = sched_clock(); + ret |= __clear_user_std(user_ptr, size); + t2 = sched_clock(); + printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1); + } + + if (ret) + ret = -EFAULT; + + vunmap(user_ptr); +no_vmap: + put_page(dst_page); +no_dst: + put_page(src_page); +no_src: + return ret; +} + +subsys_initcall(test_size_treshold); + +#endif diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index e263fda..970fd6b 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { * MCI (SD/MMC) */ static struct at91_mmc_data __initdata afeb9260_mmc_data = { + .det_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, .slot_b = 1, .wire4 = 1, }; @@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = { static struct i2c_board_info __initdata afeb9260_i2c_devices[] = { { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, { I2C_BOARD_INFO("fm3130", 0x68), }, { I2C_BOARD_INFO("24c64", 0x50), @@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void) /* I2C */ at91_add_device_i2c(afeb9260_i2c_devices, ARRAY_SIZE(afeb9260_i2c_devices)); + /* Audio */ + at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); } MACHINE_START(AFEB9260, "Custom afeb9260 board") diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 438efbb..cc270be 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -218,6 +218,13 @@ static struct gpio_led ek_leds[] = { } }; +static struct i2c_board_info __initdata ek_i2c_devices[] = { + { + I2C_BOARD_INFO("24c512", 0x50), + }, +}; + + static void __init ek_board_init(void) { /* Serial */ @@ -235,7 +242,7 @@ static void __init ek_board_init(void) /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ - at91_add_device_i2c(NULL, 0); + at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* PCK0 provides MCLK to the WM8731 */ diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index e434510..bac578f 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -43,6 +43,25 @@ #define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM) +/* + * Chips have some kind of clocks : group them by functionality + */ +#define cpu_has_utmi() ( cpu_is_at91cap9() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_800M_plla() (cpu_is_at91sam9g20()) + +#define cpu_has_pllb() (!cpu_is_at91sam9rl()) + +#define cpu_has_upll() (0) + +/* USB host HS & FS */ +#define cpu_has_uhp() (!cpu_is_at91sam9rl()) + +/* USB device FS only */ +#define cpu_has_udpfs() (!cpu_is_at91sam9rl()) + + static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -140,7 +159,7 @@ static struct clk utmi_clk = { }; static struct clk uhpck = { .name = "uhpck", - .parent = &pllb, + /*.parent = ... we choose parent at runtime */ .mode = pmc_sys_mode, }; @@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css) case AT91_PMC_CSS_PLLA: return &plla; case AT91_PMC_CSS_PLLB: - return &pllb; + if (cpu_has_upll()) + /* CSS_PLLB == CSS_UPLL */ + return &utmi_clk; + else if (cpu_has_pllb()) + return &pllb; } return NULL; @@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) u32 pckr; pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - pckr &= AT91_PMC_CSS_PLLB; /* clock selection */ + pckr &= AT91_PMC_CSS; /* clock selection */ pckr |= prescale << 2; at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); clk->rate_hz = actual; @@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } EXPORT_SYMBOL(clk_set_parent); -/* establish PCK0..PCK3 parentage and rate */ +/* establish PCK0..PCKN parentage and rate */ static void __init init_programmable_clock(struct clk *clk) { struct clk *parent; @@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused) seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); - if (!cpu_is_at91sam9rl()) + if (cpu_has_pllb()) seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) + if (cpu_has_utmi()) seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR)); seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); + if (cpu_has_upll()) + seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB)); seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); seq_printf(s, "\n"); @@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = { &clk32k, &main_clk, &plla, - &pllb, - - /* PLLB children (USB) */ - &udpck, - &uhpck, /* MCK */ &mck }; +/* PLLB generated USB full speed clock init */ +static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) +{ + /* + * USB clock init: choose 48 MHz PLLB value, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + uhpck.parent = &pllb; + + at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; + pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); + if (cpu_is_at91rm9200()) { + uhpck.pmc_mask = AT91RM9200_PMC_UHP; + udpck.pmc_mask = AT91RM9200_PMC_UDP; + at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); + } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + udpck.pmc_mask = AT91SAM926x_PMC_UDP; + } else if (cpu_is_at91cap9()) { + uhpck.pmc_mask = AT91CAP9_PMC_UHP; + } + at91_sys_write(AT91_CKGR_PLLBR, 0); + + udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); +} + +/* UPLL generated USB full speed clock init */ +static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) +{ + /* + * USB clock init: choose 480 MHz from UPLL, + */ + unsigned int usbr = AT91_PMC_USBS_UPLL; + + /* Setup divider by 10 to reach 48 MHz */ + usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV; + + at91_sys_write(AT91_PMC_USB, usbr); + + /* Now set uhpck values */ + uhpck.parent = &utmi_clk; + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + uhpck.rate_hz = utmi_clk.parent->rate_hz; + uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); +} + int __init at91_clock_init(unsigned long main_clock) { unsigned tmp, freq, mckr; @@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock) /* report if PLLA is more than mildly overclocked */ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); - if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000) - || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000)) + if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000) + || (cpu_has_800M_plla() && plla.rate_hz > 800000000)) pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); - /* - * USB clock init: choose 48 MHz PLLB value, - * disable 48MHz clock during usb peripheral suspend. - * - * REVISIT: assumes MCK doesn't derive from PLLB! - */ - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; - pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); - if (cpu_is_at91rm9200()) { - uhpck.pmc_mask = AT91RM9200_PMC_UHP; - udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91cap9()) { - uhpck.pmc_mask = AT91CAP9_PMC_UHP; + + if (cpu_has_upll() && !cpu_has_pllb()) { + /* setup UTMI clock as the fourth primary clock + * (instead of pllb) */ + utmi_clk.type |= CLK_TYPE_PRIMARY; + utmi_clk.id = 3; } - at91_sys_write(AT91_CKGR_PLLBR, 0); - udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); - uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); /* * USB HS clock init */ - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) { + if (cpu_has_utmi()) /* * multiplier is hard-wired to 40 * (obtain the USB High Speed 480 MHz when input is 12 MHz) */ utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz; - } + + /* + * USB FS clock init + */ + if (cpu_has_pllb()) + at91_pllb_usbfs_clock_init(main_clock); + if (cpu_has_upll()) + /* assumes that we choose UPLL for USB and not PLLA */ + at91_upll_usbfs_clock_init(main_clock); /* * MCK and CPU derive from one of those primary clocks. @@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock) mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */ - if (cpu_is_at91rm9200()) + if (cpu_is_at91rm9200()) { mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - else if (cpu_is_at91sam9g20()) { + } else if (cpu_is_at91sam9g20()) { mck.rate_hz = (mckr & AT91_PMC_MDIV) ? freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ if (mckr & AT91_PMC_PDIV) freq /= 2; /* processor clock division */ - } else + } else { mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ + } /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) list_add_tail(&standard_pmc_clocks[i]->node, &clocks); - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) + if (cpu_has_pllb()) + list_add_tail(&pllb.node, &clocks); + + if (cpu_has_uhp()) + list_add_tail(&uhpck.node, &clocks); + + if (cpu_has_udpfs()) + list_add_tail(&udpck.node, &clocks); + + if (cpu_has_utmi()) list_add_tail(&utmi_clk.node, &clocks); /* MCK and CPU clock are "always on" */ diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 9561e33..64589ea 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -23,7 +23,7 @@ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */ +#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ #define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ @@ -39,11 +39,11 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ -#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ @@ -72,6 +72,7 @@ #define AT91_PMC_CSS_MAIN (1 << 0) #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ #define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ #define AT91_PMC_PRES_1 (0 << 2) #define AT91_PMC_PRES_2 (1 << 2) @@ -88,12 +89,25 @@ #define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) -#define AT91SAM9_PMC_MDIV_6 (3 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ #define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ #define AT91_PMC_PDIV_1 (0 << 12) #define AT91_PMC_PDIV_2 (1 << 12) +#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ +#define AT91_PMC_PLLADIV2_OFF (0 << 12) +#define AT91_PMC_PLLADIV2_ON (1 << 12) -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ +#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ +#define AT91_PMC_USBS_PLLA (0 << 0) +#define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ +#define AT91_PMC_CSSMCK_CSS (0 << 8) +#define AT91_PMC_CSSMCK_MCK (1 << 8) #define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ #define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ @@ -102,7 +116,7 @@ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ #define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index a9c78bc..be747f5 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -1,11 +1,26 @@ if ARCH_DAVINCI +config AINTC + bool + +config CP_INTC + bool + menu "TI DaVinci Implementations" comment "DaVinci Core Type" config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" + select AINTC + +config ARCH_DAVINCI_DM355 + bool "DaVinci 355 based system" + select AINTC + +config ARCH_DAVINCI_DM646x + bool "DaVinci 646x based system" + select AINTC comment "DaVinci Board Type" @@ -17,6 +32,34 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DM644x EVM +config MACH_SFFSDR + bool "Lyrtech SFFSDR" + depends on ARCH_DAVINCI_DM644x + help + Say Y here to select the Lyrtech Small Form Factor + Software Defined Radio (SFFSDR) board. + +config MACH_DAVINCI_DM355_EVM + bool "TI DM355 EVM" + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 EVM + +config MACH_DM355_LEOPARD + bool "DM355 Leopard board" + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 Leopard board. + +config MACH_DAVINCI_DM6467_EVM + bool "TI DM6467 EVM" + depends on ARCH_DAVINCI_DM646x + help + Configure this option to specify the whether the board used + for development is a DM6467 EVM + config DAVINCI_MUX bool "DAVINCI multiplexing support" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 1674661..059ab78 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -4,13 +4,22 @@ # # Common objects -obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o devices.o dma.o usb.o +obj-y := time.o clock.o serial.o io.o psc.o \ + gpio.o devices.o dma.o usb.o common.o sram.o obj-$(CONFIG_DAVINCI_MUX) += mux.o # Chip specific obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o +obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o +obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o + +obj-$(CONFIG_AINTC) += irq.o +obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o +obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o +obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o +obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o +obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c new file mode 100644 index 0000000..5ac2f56 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -0,0 +1,298 @@ +/* + * TI DaVinci EVM board support + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips, maybe with a different block size, partitioning may + * need to be changed. + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW_SYNDROME, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static int dm355evm_mmc_gpios = -EINVAL; + +static void dm355evm_mmcsd_gpios(unsigned gpio) +{ + gpio_request(gpio + 0, "mmc0_ro"); + gpio_request(gpio + 1, "mmc0_cd"); + gpio_request(gpio + 2, "mmc1_ro"); + gpio_request(gpio + 3, "mmc1_cd"); + + /* we "know" these are input-only so we don't + * need to call gpio_direction_input() + */ + + dm355evm_mmc_gpios = gpio; +} + +static struct i2c_board_info dm355evm_i2c_info[] = { + { I2C_BOARD_INFO("dm355evm_msp", 0x25), + .platform_data = dm355evm_mmcsd_gpios, + /* plus irq */ }, + /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ + /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + + gpio_request(5, "dm355evm_msp"); + gpio_direction_input(5); + dm355evm_i2c_info[0].irq = gpio_to_irq(5); + + i2c_register_board_info(1, dm355evm_i2c_info, + ARRAY_SIZE(dm355evm_i2c_info)); +} + +static struct resource dm355evm_dm9000_rsrc[] = { + { + /* addr */ + .start = 0x04014000, + .end = 0x04014001, + .flags = IORESOURCE_MEM, + }, { + /* data */ + .start = 0x04014002, + .end = 0x04014003, + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, + }, +}; + +static struct platform_device dm355evm_dm9000 = { + .name = "dm9000", + .id = -1, + .resource = dm355evm_dm9000_rsrc, + .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc), +}; + +static struct platform_device *davinci_evm_devices[] __initdata = { + &dm355evm_dm9000, + &davinci_nand_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm355_evm_map_io(void) +{ + dm355_init(); +} + +static int dm355evm_mmc_get_cd(int module) +{ + if (!gpio_is_valid(dm355evm_mmc_gpios)) + return -ENXIO; + /* low == card present */ + return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1); +} + +static int dm355evm_mmc_get_ro(int module) +{ + if (!gpio_is_valid(dm355evm_mmc_gpios)) + return -ENXIO; + /* high == card's write protect switch active */ + return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0); +} + +static struct davinci_mmc_config dm355evm_mmc_config = { + .get_cd = dm355evm_mmc_get_cd, + .get_ro = dm355evm_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_1, +}; + +/* Don't connect anything to J10 unless you're only using USB host + * mode *and* have to do so with some kind of gender-bender. If + * you have proper Mini-B or Mini-A cables (or Mini-A adapters) + * the ID pin won't need any help. + */ +#ifdef CONFIG_USB_MUSB_PERIPHERAL +#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ +#else +#define USB_ID_VALUE 1 /* ID pulled low */ +#endif + +static struct spi_eeprom at25640a = { + .byte_len = SZ_64K / 8, + .name = "at25640a", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm355_evm_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640a, + .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static __init void dm355_evm_init(void) +{ + struct clk *aemif; + + gpio_request(1, "dm9000"); + gpio_direction_input(1); + dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1); + + aemif = clk_get(&dm355evm_dm9000.dev, "aemif"); + if (IS_ERR(aemif)) + WARN("%s: unable to get AEMIF clock\n", __func__); + else + clk_enable(aemif); + + platform_add_devices(davinci_evm_devices, + ARRAY_SIZE(davinci_evm_devices)); + evm_init_i2c(); + davinci_serial_init(&uart_config); + + /* NOTE: NAND flash timings set by the UBL are slower than + * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 + * but could be 0x0400008c for about 25% faster page reads. + */ + + gpio_request(2, "usb_id_toggle"); + gpio_direction_output(2, USB_ID_VALUE); + /* irlml6401 switches over 1A in under 8 msec */ + setup_usb(500, 8); + + davinci_setup_mmc(0, &dm355evm_mmc_config); + davinci_setup_mmc(1, &dm355evm_mmc_config); + + dm355_init_spi0(BIT(0), dm355_evm_spi_info, + ARRAY_SIZE(dm355_evm_spi_info)); +} + +static __init void dm355_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm355_evm_map_io, + .init_irq = dm355_evm_irq_init, + .timer = &davinci_timer, + .init_machine = dm355_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c new file mode 100644 index 0000000..28c9008 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -0,0 +1,296 @@ +/* + * DM355 leopard board support + * + * Based on board-dm355-evm.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips, maybe with a different block size, partitioning may + * need to be changed. + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW_SYNDROME, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static int leopard_mmc_gpio = -EINVAL; + +static void dm355leopard_mmcsd_gpios(unsigned gpio) +{ + gpio_request(gpio + 0, "mmc0_ro"); + gpio_request(gpio + 1, "mmc0_cd"); + gpio_request(gpio + 2, "mmc1_ro"); + gpio_request(gpio + 3, "mmc1_cd"); + + /* we "know" these are input-only so we don't + * need to call gpio_direction_input() + */ + + leopard_mmc_gpio = gpio; +} + +static struct i2c_board_info dm355leopard_i2c_info[] = { + { I2C_BOARD_INFO("dm355leopard_msp", 0x25), + .platform_data = dm355leopard_mmcsd_gpios, + /* plus irq */ }, + /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ + /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ +}; + +static void __init leopard_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + + gpio_request(5, "dm355leopard_msp"); + gpio_direction_input(5); + dm355leopard_i2c_info[0].irq = gpio_to_irq(5); + + i2c_register_board_info(1, dm355leopard_i2c_info, + ARRAY_SIZE(dm355leopard_i2c_info)); +} + +static struct resource dm355leopard_dm9000_rsrc[] = { + { + /* addr */ + .start = 0x04000000, + .end = 0x04000001, + .flags = IORESOURCE_MEM, + }, { + /* data */ + .start = 0x04000016, + .end = 0x04000017, + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, + }, +}; + +static struct platform_device dm355leopard_dm9000 = { + .name = "dm9000", + .id = -1, + .resource = dm355leopard_dm9000_rsrc, + .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc), +}; + +static struct platform_device *davinci_leopard_devices[] __initdata = { + &dm355leopard_dm9000, + &davinci_nand_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm355_leopard_map_io(void) +{ + dm355_init(); +} + +static int dm355leopard_mmc_get_cd(int module) +{ + if (!gpio_is_valid(leopard_mmc_gpio)) + return -ENXIO; + /* low == card present */ + return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1); +} + +static int dm355leopard_mmc_get_ro(int module) +{ + if (!gpio_is_valid(leopard_mmc_gpio)) + return -ENXIO; + /* high == card's write protect switch active */ + return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0); +} + +static struct davinci_mmc_config dm355leopard_mmc_config = { + .get_cd = dm355leopard_mmc_get_cd, + .get_ro = dm355leopard_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, +}; + +/* Don't connect anything to J10 unless you're only using USB host + * mode *and* have to do so with some kind of gender-bender. If + * you have proper Mini-B or Mini-A cables (or Mini-A adapters) + * the ID pin won't need any help. + */ +#ifdef CONFIG_USB_MUSB_PERIPHERAL +#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ +#else +#define USB_ID_VALUE 1 /* ID pulled low */ +#endif + +static struct spi_eeprom at25640a = { + .byte_len = SZ_64K / 8, + .name = "at25640a", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm355_leopard_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640a, + .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static __init void dm355_leopard_init(void) +{ + struct clk *aemif; + + gpio_request(9, "dm9000"); + gpio_direction_input(9); + dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9); + + aemif = clk_get(&dm355leopard_dm9000.dev, "aemif"); + if (IS_ERR(aemif)) + WARN("%s: unable to get AEMIF clock\n", __func__); + else + clk_enable(aemif); + + platform_add_devices(davinci_leopard_devices, + ARRAY_SIZE(davinci_leopard_devices)); + leopard_init_i2c(); + davinci_serial_init(&uart_config); + + /* NOTE: NAND flash timings set by the UBL are slower than + * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 + * but could be 0x0400008c for about 25% faster page reads. + */ + + gpio_request(2, "usb_id_toggle"); + gpio_direction_output(2, USB_ID_VALUE); + /* irlml6401 switches over 1A in under 8 msec */ + setup_usb(500, 8); + + davinci_setup_mmc(0, &dm355leopard_mmc_config); + davinci_setup_mmc(1, &dm355leopard_mmc_config); + + dm355_init_spi0(BIT(0), dm355_leopard_spi_info, + ARRAY_SIZE(dm355_leopard_spi_info)); +} + +static __init void dm355_leopard_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm355_leopard_map_io, + .init_irq = dm355_leopard_irq_init, + .timer = &davinci_timer, + .init_machine = dm355_leopard_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index b2e7f9c..d9d4045 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -16,12 +16,11 @@ #include #include #include -#include #include #include #include - +#include #include #include #include @@ -44,6 +43,9 @@ #include #include #include +#include +#include +#include #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -436,45 +438,15 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ -static struct memory_accessor *at24_mem_acc; - -static void at24_setup(struct memory_accessor *mem_acc, void *context) -{ - DECLARE_MAC_BUF(mac_str); - char mac_addr[6]; - - at24_mem_acc = mem_acc; - - /* Read MAC addr from EEPROM */ - if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { - printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", - print_mac(mac_str, mac_addr)); - } -} static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, - .setup = at24_setup, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, }; -int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) -{ - if (at24_mem_acc) - return at24_mem_acc->read(at24_mem_acc, buf, off, count); - return -ENODEV; -} -EXPORT_SYMBOL(dm6446evm_eeprom_read); - -int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) -{ - if (at24_mem_acc) - return at24_mem_acc->write(at24_mem_acc, buf, off, count); - return -ENODEV; -} -EXPORT_SYMBOL(dm6446evm_eeprom_write); - /* * MSP430 supports RTC, card detection, input from IR remote, and * a bit more. It triggers interrupts on GPIO(7) from pressing @@ -545,6 +517,27 @@ static int dm6444evm_msp430_get_pins(void) return (buf[3] << 8) | buf[2]; } +static int dm6444evm_mmc_get_cd(int module) +{ + int status = dm6444evm_msp430_get_pins(); + + return (status < 0) ? status : !(status & BIT(1)); +} + +static int dm6444evm_mmc_get_ro(int module) +{ + int status = dm6444evm_msp430_get_pins(); + + return (status < 0) ? status : status & BIT(6 + 8); +} + +static struct davinci_mmc_config dm6446evm_mmc_config = { + .get_cd = dm6444evm_mmc_get_cd, + .get_ro = dm6444evm_mmc_get_ro, + .wires = 4, + .version = MMC_CTLR_VERSION_1 +}; + static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("dm6446evm_msp", 0x23), @@ -598,7 +591,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init davinci_evm_map_io(void) { - davinci_map_common_io(); dm644x_init(); } @@ -639,6 +631,7 @@ static int davinci_phy_fixup(struct phy_device *phydev) static __init void davinci_evm_init(void) { struct clk *aemif_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -671,8 +664,13 @@ static __init void davinci_evm_init(void) ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + davinci_setup_mmc(0, &dm6446evm_mmc_config); + davinci_serial_init(&uart_config); + soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; + /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, davinci_phy_fixup); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c new file mode 100644 index 0000000..e17de63 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -0,0 +1,262 @@ +/* + * TI DaVinci DM646X EVM board + * + * Derived from: arch/arm/mach-davinci/board-evm.c + * Copyright (C) 2006 Texas Instruments. + * + * (C) 2007-2008, MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +/************************************************************************** + * Included Files + **************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DM646X_EVM_PHY_MASK (0x2) +#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +/* LEDS */ + +static struct gpio_led evm_leds[] = { + { .name = "DS1", .active_low = 1, }, + { .name = "DS2", .active_low = 1, }, + { .name = "DS3", .active_low = 1, }, + { .name = "DS4", .active_low = 1, }, +}; + +static __initconst struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, +}; + +static struct platform_device *evm_led_dev; + +static int evm_led_setup(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + struct gpio_led *leds = evm_leds; + int status; + + while (ngpio--) { + leds->gpio = gpio++; + leds++; + }; + + evm_led_dev = platform_device_alloc("leds-gpio", 0); + platform_device_add_data(evm_led_dev, &evm_led_data, + sizeof(evm_led_data)); + + evm_led_dev->dev.parent = &client->dev; + status = platform_device_add(evm_led_dev); + if (status < 0) { + platform_device_put(evm_led_dev); + evm_led_dev = NULL; + } + return status; +} + +static int evm_led_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + if (evm_led_dev) { + platform_device_unregister(evm_led_dev); + evm_led_dev = NULL; + } + return 0; +} + +static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL }; + +static int evm_sw_setup(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + int status; + int i; + char label[10]; + + for (i = 0; i < 4; ++i) { + snprintf(label, 10, "user_sw%d", i); + status = gpio_request(gpio, label); + if (status) + goto out_free; + evm_sw_gpio[i] = gpio++; + + status = gpio_direction_input(evm_sw_gpio[i]); + if (status) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + goto out_free; + } + + status = gpio_export(evm_sw_gpio[i], 0); + if (status) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + goto out_free; + } + } + return status; +out_free: + for (i = 0; i < 4; ++i) { + if (evm_sw_gpio[i] != -EINVAL) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + } + } + return status; +} + +static int evm_sw_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + int i; + + for (i = 0; i < 4; ++i) { + if (evm_sw_gpio[i] != -EINVAL) { + gpio_unexport(evm_sw_gpio[i]); + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + } + } + return 0; +} + +static int evm_pcf_setup(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + int status; + + if (ngpio < 8) + return -EINVAL; + + status = evm_sw_setup(client, gpio, 4, c); + if (status) + return status; + + return evm_led_setup(client, gpio+4, 4, c); +} + +static int evm_pcf_teardown(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + BUG_ON(ngpio < 8); + + evm_sw_teardown(client, gpio, 4, c); + evm_led_teardown(client, gpio+4, 4, c); + + return 0; +} + +static struct pcf857x_platform_data pcf_data = { + .gpio_base = DAVINCI_N_GPIO+1, + .setup = evm_pcf_setup, + .teardown = evm_pcf_teardown, +}; + +/* Most of this EEPROM is unused, but U-Boot uses some data: + * - 0x7f00, 6 bytes Ethernet Address + * - ... newer boards may have more + */ + +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, + { + I2C_BOARD_INFO("pcf8574a", 0x38), + .platform_data = &pcf_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 100 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static void __init davinci_map_io(void) +{ + dm646x_init(); +} + +static __init void evm_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + evm_init_i2c(); + davinci_serial_init(&uart_config); + + soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; +} + +static __init void davinci_dm646x_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = davinci_map_io, + .init_irq = davinci_dm646x_evm_irq_init, + .timer = &davinci_timer, + .init_machine = evm_init, +MACHINE_END + diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c new file mode 100644 index 0000000..748a8e4 --- /dev/null +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -0,0 +1,189 @@ +/* + * Lyrtech SFFSDR board support. + * + * Copyright (C) 2008 Philip Balister, OpenSDR + * Copyright (C) 2008 Lyrtech + * + * Based on DV-EVM platform, original copyright follows: + * + * Copyright (C) 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define SFFSDR_PHY_MASK (0x2) +#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +struct mtd_partition davinci_sffsdr_nandflash_partition[] = { + /* U-Boot Environment: Block 0 + * UBL: Block 1 + * U-Boot: Blocks 6-7 (256 kb) + * Integrity Kernel: Blocks 8-31 (3 Mb) + * Integrity Data: Blocks 100-END + */ + { + .name = "Linux Kernel", + .offset = 32 * SZ_128K, + .size = 16 * SZ_128K, /* 2 Mb */ + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "Linux ROOT", + .offset = MTDPART_OFS_APPEND, + .size = 256 * SZ_128K, /* 32 Mb */ + .mask_flags = 0, /* R/W */ + }, +}; + +static struct flash_platform_data davinci_sffsdr_nandflash_data = { + .parts = davinci_sffsdr_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition), +}; + +static struct resource davinci_sffsdr_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_sffsdr_nandflash_device = { + .name = "davinci_nand", /* Name of driver */ + .id = 0, + .dev = { + .platform_data = &davinci_sffsdr_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource), + .resource = davinci_sffsdr_nandflash_resource, +}; + +static struct emac_platform_data sffsdr_emac_pdata = { + .phy_mask = SFFSDR_PHY_MASK, + .mdio_max_freq = SFFSDR_MDIO_FREQUENCY, +}; + +static struct at24_platform_data eeprom_info = { + .byte_len = (64*1024) / 8, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("24lc64", 0x50), + .platform_data = &eeprom_info, + }, + /* Other I2C devices: + * MSP430, addr 0x23 (not used) + * PCA9543, addr 0x70 (setup done by U-Boot) + * ADS7828, addr 0x48 (ADC for voltage monitoring.) + */ +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static void __init sffsdr_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static struct platform_device *davinci_sffsdr_devices[] __initdata = { + &davinci_sffsdr_nandflash_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init davinci_sffsdr_map_io(void) +{ + dm644x_init(); +} + +static __init void davinci_sffsdr_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + platform_add_devices(davinci_sffsdr_devices, + ARRAY_SIZE(davinci_sffsdr_devices)); + sffsdr_init_i2c(); + davinci_serial_init(&uart_config); + soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; + setup_usb(0, 0); /* We support only peripheral mode. */ + + /* mux VLYNQ pins */ + davinci_cfg_reg(DM644X_VLYNQEN); + davinci_cfg_reg(DM644X_VLYNQWD); +} + +static __init void davinci_sffsdr_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(SFFSDR, "Lyrtech SFFSDR") + /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_sffsdr_map_io, + .init_irq = davinci_sffsdr_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_sffsdr_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index f0baaa1..39bf321 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk) if (clk->parent) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->lpsc, 1); + davinci_psc_config(psc_domain(clk), clk->psc_ctlr, + clk->lpsc, 1); } static void __clk_disable(struct clk *clk) @@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk) if (WARN_ON(clk->usecount == 0)) return; if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) - davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + davinci_psc_config(psc_domain(clk), clk->psc_ctlr, + clk->lpsc, 0); if (clk->parent) __clk_disable(clk->parent); } @@ -164,11 +166,11 @@ static int __init clk_disable_unused(void) continue; /* ignore if in Disabled or SwRstDisable states */ - if (!davinci_psc_is_clk_active(ck->lpsc)) + if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc)) continue; pr_info("Clocks: disable unused %s\n", ck->name); - davinci_psc_config(psc_domain(ck), ck->lpsc, 0); + davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0); } spin_unlock_irq(&clockfw_lock); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 35736ec..27233cb 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -67,6 +67,7 @@ struct clk { u8 usecount; u8 flags; u8 lpsc; + u8 psc_ctlr; struct clk *parent; struct pll_data *pll_data; u32 div_reg; @@ -93,4 +94,7 @@ struct davinci_clk { } int davinci_clk_init(struct davinci_clk *clocks); + +extern struct platform_device davinci_wdt_device; + #endif diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c new file mode 100644 index 0000000..61ede19 --- /dev/null +++ b/arch/arm/mach-davinci/common.c @@ -0,0 +1,108 @@ +/* + * Code commons to all DaVinci SoCs. + * + * Author: Mark A. Greer + * + * 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "clock.h" + +struct davinci_soc_info davinci_soc_info; +EXPORT_SYMBOL(davinci_soc_info); + +void __iomem *davinci_intc_base; +int davinci_intc_type; + +void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + off_t offset = (off_t)context; + + /* Read MAC addr from EEPROM */ + if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); +} + +static struct davinci_id * __init davinci_get_id(u32 jtag_id) +{ + int i; + struct davinci_id *dip; + u8 variant = (jtag_id & 0xf0000000) >> 28; + u16 part_no = (jtag_id & 0x0ffff000) >> 12; + + for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num; + i++, dip++) + /* Don't care about the manufacturer right now */ + if ((dip->part_no == part_no) && (dip->variant == variant)) + return dip; + + return NULL; +} + +void __init davinci_common_init(struct davinci_soc_info *soc_info) +{ + int ret; + struct davinci_id *dip; + + if (!soc_info) { + ret = -EINVAL; + goto err; + } + + memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info)); + + if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0)) + iotable_init(davinci_soc_info.io_desc, + davinci_soc_info.io_desc_num); + + /* + * Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* + * We want to check CPU revision early for cpu_is_xxxx() macros. + * IO space mapping must be initialized before we can do that. + */ + davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base); + + dip = davinci_get_id(davinci_soc_info.jtag_id); + if (!dip) { + ret = -EINVAL; + goto err; + } + + davinci_soc_info.cpu_id = dip->cpu_id; + pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant); + + if (davinci_soc_info.cpu_clks) { + ret = davinci_clk_init(davinci_soc_info.cpu_clks); + + if (ret != 0) + goto err; + } + + davinci_intc_base = davinci_soc_info.intc_base; + davinci_intc_type = davinci_soc_info.intc_type; + return; + +err: + pr_err("davinci_common_init: SoC Initialization failed\n"); +} diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c new file mode 100644 index 0000000..96c8e97 --- /dev/null +++ b/arch/arm/mach-davinci/cp_intc.c @@ -0,0 +1,161 @@ +/* + * TI Common Platform Interrupt Controller (cp_intc) driver + * + * Author: Steve Chen + * Copyright (C) 2008-2009, MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include + +static void __iomem *cp_intc_base; + +static inline unsigned int cp_intc_read(unsigned offset) +{ + return __raw_readl(cp_intc_base + offset); +} + +static inline void cp_intc_write(unsigned long value, unsigned offset) +{ + __raw_writel(value, cp_intc_base + offset); +} + +static void cp_intc_ack_irq(unsigned int irq) +{ + cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR); +} + +/* Disable interrupt */ +static void cp_intc_mask_irq(unsigned int irq) +{ + /* XXX don't know why we need to disable nIRQ here... */ + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); + cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR); + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); +} + +/* Enable interrupt */ +static void cp_intc_unmask_irq(unsigned int irq) +{ + cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET); +} + +static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type) +{ + unsigned reg = BIT_WORD(irq); + unsigned mask = BIT_MASK(irq); + unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); + unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + polarity |= mask; + type |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + polarity &= ~mask; + type |= mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + polarity |= mask; + type &= ~mask; + break; + case IRQ_TYPE_LEVEL_LOW: + polarity &= ~mask; + type &= ~mask; + break; + default: + return -EINVAL; + } + + cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg)); + cp_intc_write(type, CP_INTC_SYS_TYPE(reg)); + + return 0; +} + +static struct irq_chip cp_intc_irq_chip = { + .name = "cp_intc", + .ack = cp_intc_ack_irq, + .mask = cp_intc_mask_irq, + .unmask = cp_intc_unmask_irq, + .set_type = cp_intc_set_irq_type, +}; + +void __init cp_intc_init(void __iomem *base, unsigned short num_irq, + u8 *irq_prio) +{ + unsigned num_reg = BITS_TO_LONGS(num_irq); + int i; + + cp_intc_base = base; + + cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); + + /* Disable all host interrupts */ + cp_intc_write(0, CP_INTC_HOST_ENABLE(0)); + + /* Disable system interrupts */ + for (i = 0; i < num_reg; i++) + cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i)); + + /* Set to normal mode, no nesting, no priority hold */ + cp_intc_write(0, CP_INTC_CTRL); + cp_intc_write(0, CP_INTC_HOST_CTRL); + + /* Clear system interrupt status */ + for (i = 0; i < num_reg; i++) + cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i)); + + /* Enable nIRQ (what about nFIQ?) */ + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); + + /* + * Priority is determined by host channel: lower channel number has + * higher priority i.e. channel 0 has highest priority and channel 31 + * had the lowest priority. + */ + num_reg = (num_irq + 3) >> 2; /* 4 channels per register */ + if (irq_prio) { + unsigned j, k; + u32 val; + + for (k = i = 0; i < num_reg; i++) { + for (val = j = 0; j < 4; j++, k++) { + val >>= 8; + if (k < num_irq) + val |= irq_prio[k] << 24; + } + + cp_intc_write(val, CP_INTC_CHAN_MAP(i)); + } + } else { + /* + * Default everything to channel 15 if priority not specified. + * Note that channel 0-1 are mapped to nFIQ and channels 2-31 + * are mapped to nIRQ. + */ + for (i = 0; i < num_reg; i++) + cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i)); + } + + /* Set up genirq dispatching for cp_intc */ + for (i = 0; i < num_irq; i++) { + set_irq_chip(i, &cp_intc_irq_chip); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + set_irq_handler(i, handle_edge_irq); + } + + /* Enable global interrupt */ + cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); +} diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index a31370b..de16f34 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -23,8 +23,14 @@ #include #include #include +#include +#include +#include #define DAVINCI_I2C_BASE 0x01C21000 +#define DAVINCI_MMCSD0_BASE 0x01E10000 +#define DM355_MMCSD0_BASE 0x01E11000 +#define DM355_MMCSD1_BASE 0x01E00000 static struct resource i2c_resources[] = { { @@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) (void) platform_device_register(&davinci_i2c_device); } +#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) + +static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); + +static struct resource mmcsd0_resources[] = { + { + /* different on dm355 */ + .start = DAVINCI_MMCSD0_BASE, + .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_MMCINT, + .flags = IORESOURCE_IRQ, + }, { + /* different on dm355 */ + .start = IRQ_SDIOINT, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = DAVINCI_DMA_MMCRXEVT, + .flags = IORESOURCE_DMA, + }, { + .start = DAVINCI_DMA_MMCTXEVT, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd0_device = { + .name = "davinci_mmc", + .id = 0, + .dev = { + .dma_mask = &mmcsd0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmcsd0_resources), + .resource = mmcsd0_resources, +}; + +static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32); + +static struct resource mmcsd1_resources[] = { + { + .start = DM355_MMCSD1_BASE, + .end = DM355_MMCSD1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_DM355_MMCINT1, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_DM355_SDIOINT1, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = 30, /* rx */ + .flags = IORESOURCE_DMA, + }, { + .start = 31, /* tx */ + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd1_device = { + .name = "davinci_mmc", + .id = 1, + .dev = { + .dma_mask = &mmcsd1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmcsd1_resources), + .resource = mmcsd1_resources, +}; + + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ + struct platform_device *pdev = NULL; + + if (WARN_ON(cpu_is_davinci_dm646x())) + return; + + /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too; + * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused. + * + * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are + * not handled right here ... + */ + switch (module) { + case 1: + if (!cpu_is_davinci_dm355()) + break; + + /* REVISIT we may not need all these pins if e.g. this + * is a hard-wired SDIO device... + */ + davinci_cfg_reg(DM355_SD1_CMD); + davinci_cfg_reg(DM355_SD1_CLK); + davinci_cfg_reg(DM355_SD1_DATA0); + davinci_cfg_reg(DM355_SD1_DATA1); + davinci_cfg_reg(DM355_SD1_DATA2); + davinci_cfg_reg(DM355_SD1_DATA3); + + pdev = &davinci_mmcsd1_device; + break; + case 0: + if (cpu_is_davinci_dm355()) { + mmcsd0_resources[0].start = DM355_MMCSD0_BASE; + mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0; + + /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */ + davinci_cfg_reg(DM355_MMCSD0); + + /* enable RX EDMA */ + davinci_cfg_reg(DM355_EVT26_MMC0_RX); + } + + else if (cpu_is_davinci_dm644x()) { + /* REVISIT: should this be in board-init code? */ + void __iomem *base = + IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + + /* Power-on 3.3V IO cells */ + __raw_writel(0, base + DM64XX_VDD3P3V_PWDN); + /*Set up the pull regiter for MMC */ + davinci_cfg_reg(DM644X_MSTK); + } + + pdev = &davinci_mmcsd0_device; + break; + } + + if (WARN_ON(!pdev)) + return; + + pdev->dev.platform_data = config; + platform_device_register(pdev); +} + +#else + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ +} + +#endif + +/*-------------------------------------------------------------------------*/ + +static struct resource wdt_resources[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device davinci_wdt_device = { + .name = "watchdog", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void davinci_init_wdt(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + wdt_resources[0].start = (resource_size_t)soc_info->wdt_base; + wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1; + + platform_device_register(&davinci_wdt_device); +} + +/*-------------------------------------------------------------------------*/ + +struct davinci_timer_instance davinci_timer_instance[2] = { + { + .base = IO_ADDRESS(DAVINCI_TIMER0_BASE), + .bottom_irq = IRQ_TINT0_TINT12, + .top_irq = IRQ_TINT0_TINT34, + }, + { + .base = IO_ADDRESS(DAVINCI_TIMER1_BASE), + .bottom_irq = IRQ_TINT1_TINT12, + .top_irq = IRQ_TINT1_TINT34, + }, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init davinci_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + davinci_init_wdt(); + + return 0; +} +arch_initcall(davinci_init_devices); + diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c new file mode 100644 index 0000000..baaaf32 --- /dev/null +++ b/arch/arm/mach-davinci/dm355.c @@ -0,0 +1,730 @@ +/* + * TI DaVinci DM355 chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* + * Device specific clocks + */ +#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, + .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, + .flags = PLL_HAS_PREDIV, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + /* FIXME -- crystal rate is board-specific */ + .rate = DM355_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll1_data, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk vpss_dac_clk = { + .name = "vpss_dac", + .parent = &pll1_sysclk3, + .lpsc = DM355_LPSC_VPSS_DAC, +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + + +static struct clk clkout1_clk = { + .name = "clkout1", + .parent = &pll1_aux_clk, + /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */ +}; + +static struct clk clkout2_clk = { + .name = "clkout2", + .parent = &pll1_sysclkbp, +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll2_data, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk clkout3_clk = { + .name = "clkout3", + .parent = &pll2_sysclkbp, + /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */ +}; + +static struct clk arm_clk = { + .name = "arm_clk", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +/* + * NOT LISTED below, and not touched by Linux + * - in SyncReset state by default + * .lpsc = DAVINCI_LPSC_TPCC, + * .lpsc = DAVINCI_LPSC_TPTC0, + * .lpsc = DAVINCI_LPSC_TPTC1, + * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk, + * .lpsc = DAVINCI_LPSC_MEMSTICK, + * - in Enabled state by default + * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS, + * .lpsc = DAVINCI_LPSC_SCR2, // "bus" + * .lpsc = DAVINCI_LPSC_SCR3, // "bus" + * .lpsc = DAVINCI_LPSC_SCR4, // "bus" + * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation" + * .lpsc = DAVINCI_LPSC_CFG27, // "test" + * .lpsc = DAVINCI_LPSC_CFG3, // "test" + * .lpsc = DAVINCI_LPSC_CFG5, // "test" + */ + +static struct clk mjcp_clk = { + .name = "mjcp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_IMCOP, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk asp0_clk = { + .name = "asp0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk asp1_clk = { + .name = "asp1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_McBSP1, +}; + +static struct clk mmcsd0_clk = { + .name = "mmcsd0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk mmcsd1_clk = { + .name = "mmcsd1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_MMC_SD1, +}; + +static struct clk spi0_clk = { + .name = "spi0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk spi1_clk = { + .name = "spi1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_SPI1, +}; + +static struct clk spi2_clk = { + .name = "spi2", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_SPI2, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk pwm3_clk = { + .name = "pwm3", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_PWM3, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +static struct clk timer3_clk = { + .name = "timer3", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_TIMER3, +}; + +static struct clk rto_clk = { + .name = "rto", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_RTO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct davinci_clk dm355_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "vpss_dac", &vpss_dac_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "clkout1", &clkout1_clk), + CLK(NULL, "clkout2", &clkout2_clk), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "clkout3", &clkout3_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "mjcp", &mjcp_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("soc-audio.0", NULL, &asp0_clk), + CLK("soc-audio.1", NULL, &asp1_clk), + CLK("davinci_mmc.0", NULL, &mmcsd0_clk), + CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK(NULL, "spi0", &spi0_clk), + CLK(NULL, "spi1", &spi1_clk), + CLK(NULL, "spi2", &spi2_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "pwm3", &pwm3_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "timer3", &timer3_clk), + CLK(NULL, "rto", &rto_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, NULL, NULL), +}; + +/*----------------------------------------------------------------------*/ + +static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); + +static struct resource dm355_spi0_resources[] = { + { + .start = 0x01c66000, + .end = 0x01c667ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM355_SPINT0_1, + .flags = IORESOURCE_IRQ, + }, + /* Not yet used, so not included: + * IORESOURCE_IRQ: + * - IRQ_DM355_SPINT0_0 + * IORESOURCE_DMA: + * - DAVINCI_DMA_SPI_SPIX + * - DAVINCI_DMA_SPI_SPIR + */ +}; + +static struct platform_device dm355_spi0_device = { + .name = "spi_davinci", + .id = 0, + .dev = { + .dma_mask = &dm355_spi0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(dm355_spi0_resources), + .resource = dm355_spi0_resources, +}; + +void __init dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len) +{ + /* for now, assume we need MISO */ + davinci_cfg_reg(DM355_SPI0_SDI); + + /* not all slaves will be wired up */ + if (chipselect_mask & BIT(0)) + davinci_cfg_reg(DM355_SPI0_SDENA0); + if (chipselect_mask & BIT(1)) + davinci_cfg_reg(DM355_SPI0_SDENA1); + + spi_register_board_info(info, len); + + platform_device_register(&dm355_spi0_device); +} + +/*----------------------------------------------------------------------*/ + +#define PINMUX0 0x00 +#define PINMUX1 0x04 +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm355_pins[] = { +#ifdef CONFIG_DAVINCI_MUX +MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false) + +MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false) +MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false) +MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false) +MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false) +MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false) +MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false) + +MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false) +MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false) + +MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false) +MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false) +MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false) + +MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false) +MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false) +MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false) + +INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false) +INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false) +INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false) + +EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false) +EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false) +EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) +#endif +}; + +static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm355_no_event[] = { + 12, 13, 24, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm355_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm355_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using (or muxing) TC*_ERR */ +}; + +static struct platform_device dm355_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm355_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +static struct map_desc dm355_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm355_ids[] = { + { + .variant = 0x0, + .part_no = 0xb73b, + .manufacturer = 0x00f, + .cpu_id = DAVINCI_CPU_ID_DM355, + .name = "dm355", + }, +}; + +static void __iomem *dm355_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : + */ +struct davinci_timer_info dm355_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm355_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DM355_UART2_BASE, + .irq = IRQ_DM355_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm355_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm355_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm355 = { + .io_desc = dm355_io_desc, + .io_desc_num = ARRAY_SIZE(dm355_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm355_ids, + .ids_num = ARRAY_SIZE(dm355_ids), + .cpu_clks = dm355_clks, + .psc_bases = dm355_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm355_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm355_pins, + .pinmux_pins_num = ARRAY_SIZE(dm355_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm355_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm355_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 104, + .gpio_irq = IRQ_DM355_GPIOBNK0, + .serial_dev = &dm355_serial_device, + .sram_dma = 0x00010000, + .sram_len = SZ_32K, +}; + +void __init dm355_init(void) +{ + davinci_common_init(&davinci_soc_info_dm355); +} + +static int __init dm355_init_devices(void) +{ + if (!cpu_is_davinci_dm355()) + return 0; + + davinci_cfg_reg(DM355_INT_EDMA_CC); + platform_device_register(&dm355_edma_device); + return 0; +} +postcore_initcall(dm355_init_devices); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d428ef1..fb5449b 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -11,7 +11,11 @@ #include #include #include +#include #include +#include + +#include #include #include @@ -20,6 +24,9 @@ #include #include #include +#include +#include +#include #include "clock.h" #include "mux.h" @@ -312,7 +319,14 @@ struct davinci_clk dm644x_clks[] = { CLK(NULL, NULL, NULL), }; -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) +static struct emac_platform_data dm644x_emac_pdata = { + .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_1, +}; static struct resource dm644x_emac_resources[] = { { @@ -330,11 +344,15 @@ static struct resource dm644x_emac_resources[] = { static struct platform_device dm644x_emac_device = { .name = "davinci_emac", .id = 1, + .dev = { + .platform_data = &dm644x_emac_pdata, + }, .num_resources = ARRAY_SIZE(dm644x_emac_resources), .resource = dm644x_emac_resources, }; -#endif +#define PINMUX0 0x00 +#define PINMUX1 0x04 /* * Device specific mux setup @@ -343,6 +361,7 @@ static struct platform_device dm644x_emac_device = { * reg offset mask mode */ static const struct mux_config dm644x_pins[] = { +#ifdef CONFIG_DAVINCI_MUX MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) @@ -383,8 +402,76 @@ MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +#endif }; +/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ +static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_VDINT0] = 2, + [IRQ_VDINT1] = 6, + [IRQ_VDINT2] = 6, + [IRQ_HISTINT] = 6, + [IRQ_H3AINT] = 6, + [IRQ_PRVUINT] = 6, + [IRQ_RSZINT] = 6, + [7] = 7, + [IRQ_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_VLCDINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_EMACINT] = 4, + [14] = 7, + [15] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_PSCIN] = 7, + [21] = 7, + [IRQ_IDE] = 4, + [23] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_SDIOINT] = 7, + [28] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_VLQINT] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_UARTINT2] = 3, + [IRQ_SPINT0] = 3, + [IRQ_SPINT1] = 3, + [45] = 7, + [IRQ_DSP2ARM0] = 4, + [IRQ_DSP2ARM1] = 4, + [IRQ_GPIO0] = 7, + [IRQ_GPIO1] = 7, + [IRQ_GPIO2] = 7, + [IRQ_GPIO3] = 7, + [IRQ_GPIO4] = 7, + [IRQ_GPIO5] = 7, + [IRQ_GPIO6] = 7, + [IRQ_GPIO7] = 7, + [IRQ_GPIOBNK0] = 7, + [IRQ_GPIOBNK1] = 7, + [IRQ_GPIOBNK2] = 7, + [IRQ_GPIOBNK3] = 7, + [IRQ_GPIOBNK4] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; /*----------------------------------------------------------------------*/ @@ -444,10 +531,118 @@ static struct platform_device dm644x_edma_device = { }; /*----------------------------------------------------------------------*/ + +static struct map_desc dm644x_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00008000), + .length = SZ_16K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm644x_ids[] = { + { + .variant = 0x0, + .part_no = 0xb700, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6446, + .name = "dm6446", + }, +}; + +static void __iomem *dm644x_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : + */ +struct davinci_timer_info dm644x_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm644x_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm644x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm644x_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm644x = { + .io_desc = dm644x_io_desc, + .io_desc_num = ARRAY_SIZE(dm644x_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm644x_ids, + .ids_num = ARRAY_SIZE(dm644x_ids), + .cpu_clks = dm644x_clks, + .psc_bases = dm644x_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm644x_pins, + .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm644x_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm644x_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 71, + .gpio_irq = IRQ_GPIOBNK0, + .serial_dev = &dm644x_serial_device, + .emac_pdata = &dm644x_emac_pdata, + .sram_dma = 0x00008000, + .sram_len = SZ_16K, +}; + void __init dm644x_init(void) { - davinci_clk_init(dm644x_clks); - davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); + davinci_common_init(&davinci_soc_info_dm644x); } static int __init dm644x_init_devices(void) @@ -456,6 +651,7 @@ static int __init dm644x_init_devices(void) return 0; platform_device_register(&dm644x_edma_device); + platform_device_register(&dm644x_emac_device); return 0; } postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c new file mode 100644 index 0000000..334f071 --- /dev/null +++ b/arch/arm/mach-davinci/dm646x.c @@ -0,0 +1,636 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM646X_REF_FREQ 27000000 +#define DM646X_AUX_FREQ 24000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM646X_REF_FREQ, +}; + +static struct clk aux_clkin = { + .name = "aux_clkin", + .rate = DM646X_AUX_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_sysclk6 = { + .name = "pll1_sysclk6", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll1_sysclk8 = { + .name = "pll1_sysclk8", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV8, +}; + +static struct clk pll1_sysclk9 = { + .name = "pll1_sysclk9", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV9, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll2_clk = { + .name = "pll2_clk", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DM646X_LPSC_C64X_CPU, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART2, +}; + +static struct clk i2c_clk = { + .name = "I2CCLK", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_I2C, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_AEMIF, + .flags = ALWAYS_ENABLED, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_EMAC, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_PWM0, + .usecount = 1, /* REVIST: disabling hangs system */ +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_PWM1, + .usecount = 1, /* REVIST: disabling hangs system */ +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_sysclk3, + .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */ +}; + +static struct clk vpif0_clk = { + .name = "vpif0", + .parent = &ref_clk, + .lpsc = DM646X_LPSC_VPSSMSTR, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vpif1_clk = { + .name = "vpif1", + .parent = &ref_clk, + .lpsc = DM646X_LPSC_VPSSSLV, + .flags = ALWAYS_ENABLED, +}; + +struct davinci_clk dm646x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "aux", &aux_clkin), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk", &pll1_sysclk4), + CLK(NULL, "pll1_sysclk", &pll1_sysclk5), + CLK(NULL, "pll1_sysclk", &pll1_sysclk6), + CLK(NULL, "pll1_sysclk", &pll1_sysclk8), + CLK(NULL, "pll1_sysclk", &pll1_sysclk9), + CLK(NULL, "pll1_sysclk", &pll1_sysclkbp), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "vpif0", &vpif0_clk), + CLK(NULL, "vpif1", &vpif1_clk), + CLK(NULL, NULL, NULL), +}; + +static struct emac_platform_data dm646x_emac_pdata = { + .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_2, +}; + +static struct resource dm646x_emac_resources[] = { + { + .start = DM646X_EMAC_BASE, + .end = DM646X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM646X_EMACRXTHINT, + .end = IRQ_DM646X_EMACRXTHINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACRXINT, + .end = IRQ_DM646X_EMACRXINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACTXINT, + .end = IRQ_DM646X_EMACTXINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACMISCINT, + .end = IRQ_DM646X_EMACMISCINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm646x_emac_device = { + .name = "davinci_emac", + .id = 1, + .dev = { + .platform_data = &dm646x_emac_pdata, + }, + .num_resources = ARRAY_SIZE(dm646x_emac_resources), + .resource = dm646x_emac_resources, +}; + +#define PINMUX0 0x00 +#define PINMUX1 0x04 + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm646x_pins[] = { +#ifdef CONFIG_DAVINCI_MUX +MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true) + +MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false) + +MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false) + +MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true) + +MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true) + +MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true) + +MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true) + +MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true) + +MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true) + +MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true) + +MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true) + +MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true) + +MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true) + +MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true) +#endif +}; + +static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm646x_no_event[] = { + 0, 1, 2, 3, 13, + 14, 15, 24, 25, 26, + 27, 30, 31, 54, 55, + 56, + -1 +}; + +static struct edma_soc_info dm646x_edma_info = { + .n_channel = 64, + .n_region = 6, /* 0-1, 4-7 */ + .n_slot = 512, + .n_tc = 4, + .noevent = dma_chan_dm646x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc2", + .start = 0x01c10800, + .end = 0x01c10800 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc3", + .start = 0x01c10c00, + .end = 0x01c10c00 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm646x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm646x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +static struct map_desc dm646x_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm646x_ids[] = { + { + .variant = 0x0, + .part_no = 0xb770, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6467, + .name = "dm6467", + }, +}; + +static void __iomem *dm646x_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : + */ +struct davinci_timer_info dm646x_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm646x_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_DM646X_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm646x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm646x_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm646x = { + .io_desc = dm646x_io_desc, + .io_desc_num = ARRAY_SIZE(dm646x_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm646x_ids, + .ids_num = ARRAY_SIZE(dm646x_ids), + .cpu_clks = dm646x_clks, + .psc_bases = dm646x_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm646x_pins, + .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm646x_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm646x_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 43, /* Only 33 usable */ + .gpio_irq = IRQ_DM646X_GPIOBNK0, + .serial_dev = &dm646x_serial_device, + .emac_pdata = &dm646x_emac_pdata, + .sram_dma = 0x10010000, + .sram_len = SZ_32K, +}; + +void __init dm646x_init(void) +{ + davinci_common_init(&davinci_soc_info_dm646x); +} + +static int __init dm646x_init_devices(void) +{ + if (!cpu_is_davinci_dm646x()) + return 0; + + platform_device_register(&dm646x_edma_device); + platform_device_register(&dm646x_emac_device); + return 0; +} +postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index 1aba41c..1b65321 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -37,14 +38,13 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; -static unsigned __initdata ngpio; - /* create a non-inlined version */ static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } +static int __init davinci_gpio_irq_setup(void); /*--------------------------------------------------------------------------*/ @@ -115,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int __init davinci_gpio_setup(void) { int i, base; + unsigned ngpio; + struct davinci_soc_info *soc_info = &davinci_soc_info; - /* The gpio banks conceptually expose a segmented bitmap, + /* + * The gpio banks conceptually expose a segmented bitmap, * and "ngpio" is one more than the largest zero-based * bit index that's valid. */ - if (cpu_is_davinci_dm355()) { /* or dm335() */ - ngpio = 104; - } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ - ngpio = 71; - } else if (cpu_is_davinci_dm646x()) { - /* NOTE: each bank has several "reserved" bits, - * unusable as GPIOs. Only 33 of the GPIO numbers - * are usable, and we're not rejecting the others. - */ - ngpio = 43; - } else { - /* if cpu_is_davinci_dm643x() ngpio = 111 */ + ngpio = soc_info->gpio_num; + if (ngpio == 0) { pr_err("GPIO setup: how many GPIOs?\n"); return -EINVAL; } @@ -157,6 +150,7 @@ static int __init davinci_gpio_setup(void) gpiochip_add(&chips[i].chip); } + davinci_gpio_irq_setup(); return 0; } pure_initcall(davinci_gpio_setup); @@ -187,10 +181,15 @@ static void gpio_irq_enable(unsigned irq) { struct gpio_controller *__iomem g = get_irq_chip_data(irq); u32 mask = __gpio_mask(irq_to_gpio(irq)); + unsigned status = irq_desc[irq].status; + + status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; + if (!status) + status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; - if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING) + if (status & IRQ_TYPE_EDGE_FALLING) __raw_writel(mask, &g->set_falling); - if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING) + if (status & IRQ_TYPE_EDGE_RISING) __raw_writel(mask, &g->set_rising); } @@ -205,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger) irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; irq_desc[irq].status |= trigger; - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) - ? &g->set_falling : &g->clr_falling); - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) - ? &g->set_rising : &g->clr_rising); + /* don't enable the IRQ if it's currently disabled */ + if (irq_desc[irq].depth == 0) { + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) + ? &g->set_falling : &g->clr_falling); + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) + ? &g->set_rising : &g->clr_rising); + } return 0; } @@ -230,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) mask <<= 16; /* temporarily mask (level sensitive) parent IRQ */ + desc->chip->mask(irq); desc->chip->ack(irq); while (1) { u32 status; @@ -268,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; - unsigned bank_irq; struct clk *clk; u32 binten = 0; + unsigned ngpio, bank_irq; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + ngpio = soc_info->gpio_num; - if (cpu_is_davinci_dm355()) { /* or dm335() */ - bank_irq = IRQ_DM355_GPIOBNK0; - } else if (cpu_is_davinci_dm644x()) { - bank_irq = IRQ_GPIOBNK0; - } else if (cpu_is_davinci_dm646x()) { - bank_irq = IRQ_DM646X_GPIOBNK0; - } else { + bank_irq = soc_info->gpio_irq; + if (bank_irq == 0) { printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); return -EINVAL; } @@ -318,11 +319,9 @@ static int __init davinci_gpio_irq_setup(void) /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(binten, (void *__iomem) - IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); + __raw_writel(binten, soc_info->gpio_base + 0x08); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } -arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c deleted file mode 100644 index 018b994..0000000 --- a/arch/arm/mach-davinci/id.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Davinci CPU identification code - * - * Copyright (C) 2006 Komal Shah - * - * Derived from OMAP1 CPU identification code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) - -static unsigned int davinci_revision; - -struct davinci_id { - u8 variant; /* JTAG ID bits 31:28 */ - u16 part_no; /* JTAG ID bits 27:12 */ - u32 manufacturer; /* JTAG ID bits 11:1 */ - u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */ -}; - -/* Register values to detect the DaVinci version */ -static struct davinci_id davinci_ids[] __initdata = { - { - /* DM6446 */ - .part_no = 0xb700, - .variant = 0x0, - .manufacturer = 0x017, - .type = 0x64460000, - }, - { - /* DM646X */ - .part_no = 0xb770, - .variant = 0x0, - .manufacturer = 0x017, - .type = 0x64670000, - }, - { - /* DM355 */ - .part_no = 0xb73b, - .variant = 0x0, - .manufacturer = 0x00f, - .type = 0x03550000, - }, -}; - -/* - * Get Device Part No. from JTAG ID register - */ -static u16 __init davinci_get_part_no(void) -{ - u32 dev_id, part_no; - - dev_id = __raw_readl(JTAG_ID_BASE); - - part_no = ((dev_id >> 12) & 0xffff); - - return part_no; -} - -/* - * Get Device Revision from JTAG ID register - */ -static u8 __init davinci_get_variant(void) -{ - u32 variant; - - variant = __raw_readl(JTAG_ID_BASE); - - variant = (variant >> 28) & 0xf; - - return variant; -} - -unsigned int davinci_rev(void) -{ - return davinci_revision >> 16; -} -EXPORT_SYMBOL(davinci_rev); - -void __init davinci_check_revision(void) -{ - int i; - u16 part_no; - u8 variant; - - part_no = davinci_get_part_no(); - variant = davinci_get_variant(); - - /* First check only the major version in a safe way */ - for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { - if (part_no == (davinci_ids[i].part_no)) { - davinci_revision = davinci_ids[i].type; - break; - } - } - - /* Check if we can find the dev revision */ - for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { - if (part_no == davinci_ids[i].part_no && - variant == davinci_ids[i].variant) { - davinci_revision = davinci_ids[i].type; - break; - } - } - - printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", - davinci_rev(), variant); -} diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h deleted file mode 100644 index 3216f21..0000000 --- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * DaVinci DM6446 EVM board specific headers - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or ifndef. - */ - -#ifndef _MACH_DAVINCI_DM6446EVM_H -#define _MACH_DAVINCI_DM6446EVM_H - -#include - -int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); -int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); - -#endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 1917709..a1f03b6 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -17,7 +17,8 @@ struct sys_timer; extern struct sys_timer davinci_timer; extern void davinci_irq_init(void); -extern void davinci_map_common_io(void); +extern void __iomem *davinci_intc_base; +extern int davinci_intc_type; /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); @@ -25,4 +26,56 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec); /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); +struct davinci_timer_instance { + void __iomem *base; + u32 bottom_irq; + u32 top_irq; + unsigned long cmp_off; + unsigned int cmp_irq; +}; + +struct davinci_timer_info { + struct davinci_timer_instance *timers; + unsigned int clockevent_id; + unsigned int clocksource_id; +}; + +/* SoC specific init support */ +struct davinci_soc_info { + struct map_desc *io_desc; + unsigned long io_desc_num; + u32 cpu_id; + u32 jtag_id; + void __iomem *jtag_id_base; + struct davinci_id *ids; + unsigned long ids_num; + struct davinci_clk *cpu_clks; + void __iomem **psc_bases; + unsigned long psc_bases_num; + void __iomem *pinmux_base; + const struct mux_config *pinmux_pins; + unsigned long pinmux_pins_num; + void __iomem *intc_base; + int intc_type; + u8 *intc_irq_prios; + unsigned long intc_irq_num; + struct davinci_timer_info *timer_info; + void __iomem *wdt_base; + void __iomem *gpio_base; + unsigned gpio_num; + unsigned gpio_irq; + struct platform_device *serial_dev; + struct emac_platform_data *emac_pdata; + dma_addr_t sram_dma; + unsigned sram_len; +}; + +extern struct davinci_soc_info davinci_soc_info; + +extern void davinci_common_init(struct davinci_soc_info *soc_info); + +/* standard place to map on-chip SRAMs; they *may* support DMA */ +#define SRAM_VIRT 0xfffe0000 +#define SRAM_SIZE SZ_128K + #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h new file mode 100644 index 0000000..c4d27ee --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -0,0 +1,57 @@ +/* + * TI Common Platform Interrupt Controller (cp_intc) definitions + * + * Author: Steve Chen + * Copyright (C) 2008-2009, MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __ASM_HARDWARE_CP_INTC_H +#define __ASM_HARDWARE_CP_INTC_H + +#define CP_INTC_REV 0x00 +#define CP_INTC_CTRL 0x04 +#define CP_INTC_HOST_CTRL 0x0C +#define CP_INTC_GLOBAL_ENABLE 0x10 +#define CP_INTC_GLOBAL_NESTING_LEVEL 0x1C +#define CP_INTC_SYS_STAT_IDX_SET 0x20 +#define CP_INTC_SYS_STAT_IDX_CLR 0x24 +#define CP_INTC_SYS_ENABLE_IDX_SET 0x28 +#define CP_INTC_SYS_ENABLE_IDX_CLR 0x2C +#define CP_INTC_GLOBAL_WAKEUP_ENABLE 0x30 +#define CP_INTC_HOST_ENABLE_IDX_SET 0x34 +#define CP_INTC_HOST_ENABLE_IDX_CLR 0x38 +#define CP_INTC_PACING_PRESCALE 0x40 +#define CP_INTC_VECTOR_BASE 0x50 +#define CP_INTC_VECTOR_SIZE 0x54 +#define CP_INTC_VECTOR_NULL 0x58 +#define CP_INTC_PRIO_IDX 0x80 +#define CP_INTC_PRIO_VECTOR 0x84 +#define CP_INTC_SECURE_ENABLE 0x90 +#define CP_INTC_SECURE_PRIO_IDX 0x94 +#define CP_INTC_PACING_PARAM(n) (0x0100 + (n << 4)) +#define CP_INTC_PACING_DEC(n) (0x0104 + (n << 4)) +#define CP_INTC_PACING_MAP(n) (0x0108 + (n << 4)) +#define CP_INTC_SYS_RAW_STAT(n) (0x0200 + (n << 2)) +#define CP_INTC_SYS_STAT_CLR(n) (0x0280 + (n << 2)) +#define CP_INTC_SYS_ENABLE_SET(n) (0x0300 + (n << 2)) +#define CP_INTC_SYS_ENABLE_CLR(n) (0x0380 + (n << 2)) +#define CP_INTC_CHAN_MAP(n) (0x0400 + (n << 2)) +#define CP_INTC_HOST_MAP(n) (0x0800 + (n << 2)) +#define CP_INTC_HOST_PRIO_IDX(n) (0x0900 + (n << 2)) +#define CP_INTC_SYS_POLARITY(n) (0x0D00 + (n << 2)) +#define CP_INTC_SYS_TYPE(n) (0x0D80 + (n << 2)) +#define CP_INTC_WAKEUP_ENABLE(n) (0x0E00 + (n << 2)) +#define CP_INTC_DEBUG_SELECT(n) (0x0F00 + (n << 2)) +#define CP_INTC_SYS_SECURE_ENABLE(n) (0x1000 + (n << 2)) +#define CP_INTC_HOST_NESTING_LEVEL(n) (0x1100 + (n << 2)) +#define CP_INTC_HOST_ENABLE(n) (0x1500 + (n << 2)) +#define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2)) +#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) + +void __init cp_intc_init(void __iomem *base, unsigned short num_irq, + u8 *irq_prio); + +#endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index 27cfb1b..d12a5ed 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -16,17 +16,30 @@ #ifndef _ASM_ARCH_CPU_H #define _ASM_ARCH_CPU_H -extern unsigned int davinci_rev(void); +#include -#define IS_DAVINCI_CPU(type, id) \ -static inline int is_davinci_dm ##type(void) \ -{ \ - return (davinci_rev() == (id)) ? 1 : 0; \ +struct davinci_id { + u8 variant; /* JTAG ID bits 31:28 */ + u16 part_no; /* JTAG ID bits 27:12 */ + u16 manufacturer; /* JTAG ID bits 11:1 */ + u32 cpu_id; + char *name; +}; + +/* Can use lower 16 bits of cpu id for a variant when required */ +#define DAVINCI_CPU_ID_DM6446 0x64460000 +#define DAVINCI_CPU_ID_DM6467 0x64670000 +#define DAVINCI_CPU_ID_DM355 0x03550000 + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_ ##type(void) \ +{ \ + return (davinci_soc_info.cpu_id == (id)); \ } -IS_DAVINCI_CPU(644x, 0x6446) -IS_DAVINCI_CPU(646x, 0x6467) -IS_DAVINCI_CPU(355, 0x355) +IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446) +IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467) +IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) #ifdef CONFIG_ARCH_DAVINCI_DM644x #define cpu_is_davinci_dm644x() is_davinci_dm644x() diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index e6c0f0d..de3fc21 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -9,6 +9,16 @@ * or implied. */ +/* Modifications + * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart + * macros, based on debug-8250.S file + * but using 32-bit accesses required for + * some davinci devices. + */ + +#include +#define UART_SHIFT 2 + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? @@ -17,5 +27,22 @@ orr \rx, \rx, #0x00c20000 @ UART 0 .endm -#define UART_SHIFT 2 -#include + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef FLOW_CONTROL +1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm + diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h new file mode 100644 index 0000000..54903b7 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm355.h @@ -0,0 +1,22 @@ +/* + * Chip specific defines for DM355 SoC + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DM355_H +#define __ASM_ARCH_DM355_H + +#include + +struct spi_board_info; + +void __init dm355_init(void); +void dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); + +#endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 3dcb9f4..15d42b9 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -24,6 +24,7 @@ #include #include +#include #define DM644X_EMAC_BASE (0x01C80000) #define DM644X_EMAC_CNTRL_OFFSET (0x0000) diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h new file mode 100644 index 0000000..1fc764c --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -0,0 +1,26 @@ +/* + * Chip specific defines for DM646x SoC + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DM646X_H +#define __ASM_ARCH_DM646X_H + +#include +#include + +#define DM646X_EMAC_BASE (0x01C80000) +#define DM646X_EMAC_CNTRL_OFFSET (0x0000) +#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM646X_EMAC_MDIO_OFFSET (0x4000) +#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm646x_init(void); + +#endif /* __ASM_ARCH_DM646X_H */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index f6fc539..24a3792 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); -/* UNRELATED TO DMA */ -int davinci_alloc_iram(unsigned size); -void davinci_free_iram(unsigned addr, unsigned size); - /* platform_data for EDMA driver */ struct edma_soc_info { diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h new file mode 100644 index 0000000..beff4fb --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/emac.h @@ -0,0 +1,36 @@ +/* + * TI DaVinci EMAC platform support + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _MACH_DAVINCI_EMAC_H +#define _MACH_DAVINCI_EMAC_H + +#include +#include + +struct emac_platform_data { + char mac_addr[ETH_ALEN]; + u32 ctrl_reg_offset; + u32 ctrl_mod_reg_offset; + u32 ctrl_ram_offset; + u32 mdio_reg_offset; + u32 ctrl_ram_size; + u32 phy_mask; + u32 mdio_max_freq; + u8 rmii_en; + u8 version; +}; + +enum { + EMAC_VERSION_1, /* DM644x */ + EMAC_VERSION_2, /* DM646x */ +}; + +void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context); +#endif diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 039b84f..fbdebc7 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -15,17 +15,36 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + ldr \base, =davinci_intc_base + ldr \base, [\base] .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp +#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC) + ldr \tmp, =davinci_intc_type + ldr \tmp, [\tmp] + cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC + beq 1001f +#endif +#if defined(CONFIG_AINTC) ldr \tmp, [\base, #0x14] - mov \tmp, \tmp, lsr #2 + movs \tmp, \tmp, lsr #2 sub \irqnr, \tmp, #1 - cmp \tmp, #0 + b 1002f +#endif +#if defined(CONFIG_CP_INTC) +1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ + mov \tmp, \irqnr, lsr #3 + and \tmp, \tmp, #0xfc + add \tmp, \tmp, #0x280 /* get the register offset */ + ldr \irqstat, [\base, \tmp] /* get the intc status */ + cmp \irqstat, #0x0 +#endif +1002: .endm .macro irq_prio_table diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index efe3281..ae07455 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -17,6 +17,7 @@ #include #include +#include #define DAVINCI_GPIO_BASE 0x01C67000 @@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem __gpio_to_controller(unsigned gpio) { void *__iomem ptr; + void __iomem *base = davinci_soc_info.gpio_base; if (gpio < 32 * 1) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); + ptr = base + 0x10; else if (gpio < 32 * 2) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); + ptr = base + 0x38; else if (gpio < 32 * 3) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + ptr = base + 0x60; else if (gpio < 32 * 4) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); + ptr = base + 0x88; else ptr = NULL; return ptr; @@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio) { if (gpio >= DAVINCI_N_GPIO) return -EINVAL; - return DAVINCI_N_AINTC_IRQ + gpio; + return davinci_soc_info.intc_irq_num + gpio; } static inline int irq_to_gpio(unsigned irq) { /* caller guarantees gpio_to_irq() succeeded */ - return irq - DAVINCI_N_AINTC_IRQ; + return irq - davinci_soc_info.intc_irq_num; } #endif /* __DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 1806607..bc5d6aa 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -30,6 +30,9 @@ /* Base address */ #define DAVINCI_ARM_INTC_BASE 0x01C48000 +#define DAVINCI_INTC_TYPE_AINTC 0 +#define DAVINCI_INTC_TYPE_CP_INTC 1 + /* Interrupt lines */ #define IRQ_VDINT0 0 #define IRQ_VDINT1 1 diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 86c25c7..c712c7c 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -21,7 +21,6 @@ * Definitions **************************************************************************/ #define DAVINCI_DDR_BASE 0x80000000 -#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */ #define PHYS_OFFSET DAVINCI_DDR_BASE diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h new file mode 100644 index 0000000..5a85e24 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/mmc.h @@ -0,0 +1,33 @@ +/* + * Board-specific MMC configuration + */ + +#ifndef _DAVINCI_MMC_H +#define _DAVINCI_MMC_H + +#include +#include + +struct davinci_mmc_config { + /* get_cd()/get_wp() may sleep */ + int (*get_cd)(int module); + int (*get_ro)(int module); + /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ + u8 wires; + + u32 max_freq; + + /* any additional host capabilities: OR'd in to mmc->f_caps */ + u32 caps; + + /* Version of the MMC/SD controller */ + u8 version; +}; +void davinci_setup_mmc(int module, struct davinci_mmc_config *config); + +enum { + MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ + MMC_CTLR_VERSION_2, /* DA830 */ +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index bae22cb..2737845 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -19,16 +19,6 @@ #ifndef __INC_MACH_MUX_H #define __INC_MACH_MUX_H -/* System module registers */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 -/* dm355 only */ -#define PINMUX2 0x08 -#define PINMUX3 0x0c -#define PINMUX4 0x10 -#define INTMUX 0x18 -#define EVTMUX 0x1c - struct mux_config { const char *name; const char *mux_reg_name; @@ -168,15 +158,9 @@ enum davinci_dm355_index { #ifdef CONFIG_DAVINCI_MUX /* setup pin muxing */ -extern void davinci_mux_init(void); -extern int davinci_mux_register(const struct mux_config *pins, - unsigned long size); extern int davinci_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ -static inline void davinci_mux_init(void) {} -static inline int davinci_mux_register(const struct mux_config *pins, - unsigned long size) { return 0; } static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } #endif diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 55a90d4..ab8a258 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -27,6 +27,8 @@ #ifndef __ASM_ARCH_PSC_H #define __ASM_ARCH_PSC_H +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* Power and Sleep Controller (PSC) Domains */ #define DAVINCI_GPSC_ARMDOMAIN 0 #define DAVINCI_GPSC_DSPDOMAIN 1 @@ -116,8 +118,8 @@ #define DM646X_LPSC_TIMER1 35 #define DM646X_LPSC_ARM_INTC 45 -extern int davinci_psc_is_clk_active(unsigned int id); -extern void davinci_psc_config(unsigned int domain, unsigned int id, - char enable); +extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, + unsigned int id, char enable); #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 632847d..794fa5c 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -18,8 +18,6 @@ #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) -#define DM355_UART2_BASE (IO_PHYS + 0x206000) - /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c #define UART_DM646X_SCR 0x10 @@ -30,6 +28,6 @@ struct davinci_uart_config { unsigned int enabled_uarts; }; -extern void davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h new file mode 100644 index 0000000..111f7cc --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -0,0 +1,27 @@ +/* + * mach/sram.h - DaVinci simple SRAM allocator + * + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MACH_SRAM_H +#define __MACH_SRAM_H + +/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ +#define SRAM_GRANULARITY 512 + +/* + * SRAM allocations return a CPU virtual address, or NULL on error. + * If a DMA address is requested and the SRAM supports DMA, its + * mapped address is also returned. + * + * Errors include SRAM memory not being available, and requesting + * DMA mapped SRAM on systems which don't allow that. + */ +extern void *sram_alloc(size_t len, dma_addr_t *dma); +extern void sram_free(void *addr, size_t len); + +#endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h new file mode 100644 index 0000000..1c971d8 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/time.h @@ -0,0 +1,35 @@ +/* + * Local header file for DaVinci time code. + * + * Author: Kevin Hilman, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H +#define __ARCH_ARM_MACH_DAVINCI_TIME_H + +#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) +#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) +#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) + +enum { + T0_BOT, + T0_TOP, + T1_BOT, + T1_TOP, + NUM_TIMERS +}; + +#define IS_TIMER1(id) (id & 0x2) +#define IS_TIMER0(id) (!IS_TIMER1(id)) +#define IS_TIMER_TOP(id) ((id & 0x1)) +#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id)) + +#define ID_TO_TIMER(id) (IS_TIMER1(id) != 0) + +extern struct davinci_timer_instance davinci_timer_instance[]; + +#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 8c165de..1e27475 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -13,11 +13,24 @@ #include #include +#include + +extern unsigned int __machine_arch_type; + +static u32 *uart; + +static u32 *get_uart_base(void) +{ + /* Add logic here for new platforms, using __macine_arch_type */ + return (u32 *)DAVINCI_UART0_BASE; +} + /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) { - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; + if (!uart) + uart = get_uart_base(); while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); @@ -26,7 +39,9 @@ static void putc(char c) static inline void flush(void) { - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; + if (!uart) + uart = get_uart_base(); + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index a548abb..49912b4 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -9,47 +9,9 @@ */ #include -#include -#include #include #include -#include - -#include -#include - -extern void davinci_check_revision(void); - -/* - * The machine specific code may provide the extra mapping besides the - * default mapping provided here. - */ -static struct map_desc davinci_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -void __init davinci_map_common_io(void) -{ - iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc)); - - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - /* We want to check CPU revision early for cpu_is_xxxx() macros. - * IO space mapping must be initialized before we can do that. - */ - davinci_check_revision(); -} #define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 5a324c9..af92ffe 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -26,6 +26,7 @@ #include #include +#include #include #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -41,18 +42,14 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C -const u8 *davinci_def_priorities; - -#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) - static inline unsigned int davinci_irq_readl(int offset) { - return __raw_readl(INTC_BASE + offset); + return __raw_readl(davinci_intc_base + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - __raw_writel(value, INTC_BASE + offset); + __raw_writel(value, davinci_intc_base + offset); } /* Disable interrupt */ @@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; -/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { - [IRQ_VDINT0] = 2, - [IRQ_VDINT1] = 6, - [IRQ_VDINT2] = 6, - [IRQ_HISTINT] = 6, - [IRQ_H3AINT] = 6, - [IRQ_PRVUINT] = 6, - [IRQ_RSZINT] = 6, - [7] = 7, - [IRQ_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_VLCDINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_EMACINT] = 4, - [14] = 7, - [15] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_PSCIN] = 7, - [21] = 7, - [IRQ_IDE] = 4, - [23] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_SDIOINT] = 7, - [28] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_VLQINT] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_UARTINT2] = 3, - [IRQ_SPINT0] = 3, - [IRQ_SPINT1] = 3, - [45] = 7, - [IRQ_DSP2ARM0] = 4, - [IRQ_DSP2ARM1] = 4, - [IRQ_GPIO0] = 7, - [IRQ_GPIO1] = 7, - [IRQ_GPIO2] = 7, - [IRQ_GPIO3] = 7, - [IRQ_GPIO4] = 7, - [IRQ_GPIO5] = 7, - [IRQ_GPIO6] = 7, - [IRQ_GPIO7] = 7, - [IRQ_GPIOBNK0] = 7, - [IRQ_GPIOBNK1] = 7, - [IRQ_GPIOBNK2] = 7, - [IRQ_GPIOBNK3] = 7, - [IRQ_GPIOBNK4] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_DM646X_VP_VERTINT0] = 7, - [IRQ_DM646X_VP_VERTINT1] = 7, - [IRQ_DM646X_VP_VERTINT2] = 7, - [IRQ_DM646X_VP_VERTINT3] = 7, - [IRQ_DM646X_VP_ERRINT] = 7, - [IRQ_DM646X_RESERVED_1] = 7, - [IRQ_DM646X_RESERVED_2] = 7, - [IRQ_DM646X_WDINT] = 7, - [IRQ_DM646X_CRGENINT0] = 7, - [IRQ_DM646X_CRGENINT1] = 7, - [IRQ_DM646X_TSIFINT0] = 7, - [IRQ_DM646X_TSIFINT1] = 7, - [IRQ_DM646X_VDCEINT] = 7, - [IRQ_DM646X_USBINT] = 7, - [IRQ_DM646X_USBDMAINT] = 7, - [IRQ_DM646X_PCIINT] = 7, - [IRQ_CCINT0] = 7, /* dma */ - [IRQ_CCERRINT] = 7, /* dma */ - [IRQ_TCERRINT0] = 7, /* dma */ - [IRQ_TCERRINT] = 7, /* dma */ - [IRQ_DM646X_TCERRINT2] = 7, - [IRQ_DM646X_TCERRINT3] = 7, - [IRQ_DM646X_IDE] = 7, - [IRQ_DM646X_HPIINT] = 7, - [IRQ_DM646X_EMACRXTHINT] = 7, - [IRQ_DM646X_EMACRXINT] = 7, - [IRQ_DM646X_EMACTXINT] = 7, - [IRQ_DM646X_EMACMISCINT] = 7, - [IRQ_DM646X_MCASP0TXINT] = 7, - [IRQ_DM646X_MCASP0RXINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_DM646X_RESERVED_3] = 7, - [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ - [IRQ_TINT0_TINT34] = 7, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_DM646X_VLQINT] = 7, - [IRQ_I2C] = 7, - [IRQ_UARTINT0] = 7, - [IRQ_UARTINT1] = 7, - [IRQ_DM646X_UARTINT2] = 7, - [IRQ_DM646X_SPINT0] = 7, - [IRQ_DM646X_SPINT1] = 7, - [IRQ_DM646X_DSP2ARMINT] = 7, - [IRQ_DM646X_RESERVED_4] = 7, - [IRQ_DM646X_PSCINT] = 7, - [IRQ_DM646X_GPIO0] = 7, - [IRQ_DM646X_GPIO1] = 7, - [IRQ_DM646X_GPIO2] = 7, - [IRQ_DM646X_GPIO3] = 7, - [IRQ_DM646X_GPIO4] = 7, - [IRQ_DM646X_GPIO5] = 7, - [IRQ_DM646X_GPIO6] = 7, - [IRQ_DM646X_GPIO7] = 7, - [IRQ_DM646X_GPIOBNK0] = 7, - [IRQ_DM646X_GPIOBNK1] = 7, - [IRQ_DM646X_GPIOBNK2] = 7, - [IRQ_DM646X_DDRINT] = 7, - [IRQ_DM646X_AEMIFINT] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_DM355_CCDC_VDINT0] = 2, - [IRQ_DM355_CCDC_VDINT1] = 6, - [IRQ_DM355_CCDC_VDINT2] = 6, - [IRQ_DM355_IPIPE_HST] = 6, - [IRQ_DM355_H3AINT] = 6, - [IRQ_DM355_IPIPE_SDR] = 6, - [IRQ_DM355_IPIPEIFINT] = 6, - [IRQ_DM355_OSDINT] = 7, - [IRQ_DM355_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_DM355_RTOINT] = 4, - [IRQ_DM355_UARTINT2] = 7, - [IRQ_DM355_TINT6] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_DM355_SPINT2_1] = 7, - [IRQ_DM355_TINT7] = 4, - [IRQ_DM355_SDIOINT0] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_DM355_MMCINT1] = 7, - [IRQ_DM355_PWMINT3] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_DM355_SDIOINT1] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_DM355_SPINT0_0] = 3, - [IRQ_DM355_SPINT0_1] = 3, - [IRQ_DM355_GPIO0] = 3, - [IRQ_DM355_GPIO1] = 7, - [IRQ_DM355_GPIO2] = 4, - [IRQ_DM355_GPIO3] = 4, - [IRQ_DM355_GPIO4] = 7, - [IRQ_DM355_GPIO5] = 7, - [IRQ_DM355_GPIO6] = 7, - [IRQ_DM355_GPIO7] = 7, - [IRQ_DM355_GPIO8] = 7, - [IRQ_DM355_GPIO9] = 7, - [IRQ_DM355_GPIOBNK0] = 7, - [IRQ_DM355_GPIOBNK1] = 7, - [IRQ_DM355_GPIOBNK2] = 7, - [IRQ_DM355_GPIOBNK3] = 7, - [IRQ_DM355_GPIOBNK4] = 7, - [IRQ_DM355_GPIOBNK5] = 7, - [IRQ_DM355_GPIOBNK6] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - - if (cpu_is_davinci_dm644x()) - davinci_def_priorities = dm644x_default_priorities; - else if (cpu_is_davinci_dm646x()) - davinci_def_priorities = dm646x_default_priorities; - else if (cpu_is_davinci_dm355()) - davinci_def_priorities = dm355_default_priorities; + const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index bbba0b2..d310f57 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -21,18 +21,7 @@ #include #include - -static const struct mux_config *mux_table; -static unsigned long pin_table_sz; - -int __init davinci_mux_register(const struct mux_config *pins, - unsigned long size) -{ - mux_table = pins; - pin_table_sz = size; - - return 0; -} +#include /* * Sets the DAVINCI MUX register based on the table @@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins, int __init_or_module davinci_cfg_reg(const unsigned long index) { static DEFINE_SPINLOCK(mux_spin_lock); - void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + struct davinci_soc_info *soc_info = &davinci_soc_info; + void __iomem *base = soc_info->pinmux_base; unsigned long flags; const struct mux_config *cfg; unsigned int reg_orig = 0, reg = 0; unsigned int mask, warn = 0; - if (!mux_table) + if (!soc_info->pinmux_pins) BUG(); - if (index >= pin_table_sz) { + if (index >= soc_info->pinmux_pins_num) { printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", - index, pin_table_sz); + index, soc_info->pinmux_pins_num); dump_stack(); return -ENODEV; } - cfg = &mux_table[index]; + cfg = &soc_info->pinmux_pins[index]; if (cfg->name == NULL) { printk(KERN_ERR "No entry for the specified index\n"); diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 84171ab..a78b657 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -28,8 +28,6 @@ #include #include -#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 - /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 @@ -42,22 +40,42 @@ #define MDSTAT_STATE_MASK 0x1f /* Return nonzero iff the domain's clock is active */ -int __init davinci_psc_is_clk_active(unsigned int id) +int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) { - void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); - u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + void __iomem *psc_base; + u32 mdstat; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return 0; + } + + psc_base = soc_info->psc_bases[ctlr]; + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); /* if clocked, state can be "Enable" or "SyncReset" */ return mdstat & BIT(12); } /* Enable or disable a PSC domain */ -void davinci_psc_config(unsigned int domain, unsigned int id, char enable) +void davinci_psc_config(unsigned int domain, unsigned int ctlr, + unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; - void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + void __iomem *psc_base; + struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return; + } + + psc_base = soc_info->psc_bases[ctlr]; + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); mdctl &= ~MDSTAT_STATE_MASK; mdctl |= next_state; diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 6950757..c530c73 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -33,6 +33,8 @@ #include #include #include +#include + #include "clock.h" static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, @@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = DAVINCI_UART0_BASE, - .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .mapbase = DAVINCI_UART1_BASE, - .irq = IRQ_UARTINT1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .mapbase = DAVINCI_UART2_BASE, - .irq = IRQ_UARTINT2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0 - }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - static void __init davinci_serial_reset(struct plat_serial8250_port *p) { unsigned int pwremu = 0; @@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -void __init davinci_serial_init(struct davinci_uart_config *info) +int __init davinci_serial_init(struct davinci_uart_config *info) { int i; char name[16]; struct clk *uart_clk; - struct device *dev = &serial_device.dev; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + struct plat_serial8250_port *p = dev->platform_data; /* * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. + * You have to mux them off in device drivers later on if not needed. */ - for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; - - if (!(info->enabled_uarts & (1 << i))) { - p->flags = 0; + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) { + if (!(info->enabled_uarts & (1 << i))) continue; - } - - if (cpu_is_davinci_dm646x()) - p->iotype = UPIO_MEM32; - - if (cpu_is_davinci_dm355()) { - if (i == 2) { - p->mapbase = (unsigned long)DM355_UART2_BASE; - p->irq = IRQ_DM355_UARTINT2; - } - } sprintf(name, "uart%d", i); uart_clk = clk_get(dev, name); @@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info) davinci_serial_reset(p); } } -} -static int __init davinci_init(void) -{ - return platform_device_register(&serial_device); + return platform_device_register(soc_info->serial_dev); } - -arch_initcall(davinci_init); diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c new file mode 100644 index 0000000..db54b2a --- /dev/null +++ b/arch/arm/mach-davinci/sram.c @@ -0,0 +1,74 @@ +/* + * mach-davinci/sram.c - DaVinci simple SRAM allocator + * + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include + +#include +#include +#include + + +static struct gen_pool *sram_pool; + +void *sram_alloc(size_t len, dma_addr_t *dma) +{ + unsigned long vaddr; + dma_addr_t dma_base = davinci_soc_info.sram_dma; + + if (dma) + *dma = 0; + if (!sram_pool || (dma && !dma_base)) + return NULL; + + vaddr = gen_pool_alloc(sram_pool, len); + if (!vaddr) + return NULL; + + if (dma) + *dma = dma_base + (vaddr - SRAM_VIRT); + return (void *)vaddr; + +} +EXPORT_SYMBOL(sram_alloc); + +void sram_free(void *addr, size_t len) +{ + gen_pool_free(sram_pool, (unsigned long) addr, len); +} +EXPORT_SYMBOL(sram_free); + + +/* + * REVISIT This supports CPU and DMA access to/from SRAM, but it + * doesn't (yet?) support some other notable uses of SRAM: as TCM + * for data and/or instructions; and holding code needed to enter + * and exit suspend states (while DRAM can't be used). + */ +static int __init sram_init(void) +{ + unsigned len = davinci_soc_info.sram_len; + int status = 0; + + if (len) { + len = min(len, SRAM_SIZE); + sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1); + if (!sram_pool) + status = -ENOMEM; + } + if (sram_pool) + status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + WARN_ON(status < 0); + return status; +} +core_initcall(sram_init); + diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 494e01b..0884ca5 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -28,52 +29,41 @@ #include #include #include +#include #include "clock.h" static struct clock_event_device clockevent_davinci; static unsigned int davinci_clock_tick_rate; -#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) -#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) -#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) - -enum { - T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS, -}; - -#define IS_TIMER1(id) (id & 0x2) -#define IS_TIMER0(id) (!IS_TIMER1(id)) -#define IS_TIMER_TOP(id) ((id & 0x1)) -#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id)) - -static int timer_irqs[NUM_TIMERS] = { - IRQ_TINT0_TINT12, - IRQ_TINT0_TINT34, - IRQ_TINT1_TINT12, - IRQ_TINT1_TINT34, -}; - /* * This driver configures the 2 64-bit count-up timers as 4 independent * 32-bit count-up timers used as follows: - * - * T0_BOT: Timer 0, bottom: clockevent source for hrtimers - * T0_TOP: Timer 0, top : clocksource for generic timekeeping - * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) - * T1_TOP: Timer 1, top : */ -#define TID_CLOCKEVENT T0_BOT -#define TID_CLOCKSOURCE T0_TOP + +enum { + TID_CLOCKEVENT, + TID_CLOCKSOURCE, +}; /* Timer register offsets */ -#define PID12 0x0 -#define TIM12 0x10 -#define TIM34 0x14 -#define PRD12 0x18 -#define PRD34 0x1c -#define TCR 0x20 -#define TGCR 0x24 -#define WDTCR 0x28 +#define PID12 0x0 +#define TIM12 0x10 +#define TIM34 0x14 +#define PRD12 0x18 +#define PRD34 0x1c +#define TCR 0x20 +#define TGCR 0x24 +#define WDTCR 0x28 + +/* Offsets of the 8 compare registers */ +#define CMP12_0 0x60 +#define CMP12_1 0x64 +#define CMP12_2 0x68 +#define CMP12_3 0x6c +#define CMP12_4 0x70 +#define CMP12_5 0x74 +#define CMP12_6 0x78 +#define CMP12_7 0x7c /* Timer register bitfields */ #define TCR_ENAMODE_DISABLE 0x0 @@ -105,6 +95,7 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; + unsigned long flags; void __iomem *base; unsigned long tim_off; unsigned long prd_off; @@ -114,30 +105,58 @@ struct timer_s { static struct timer_s timers[]; /* values for 'opts' field of struct timer_s */ -#define TIMER_OPTS_DISABLED 0x00 -#define TIMER_OPTS_ONESHOT 0x01 -#define TIMER_OPTS_PERIODIC 0x02 +#define TIMER_OPTS_DISABLED 0x01 +#define TIMER_OPTS_ONESHOT 0x02 +#define TIMER_OPTS_PERIODIC 0x04 +#define TIMER_OPTS_STATE_MASK 0x07 + +#define TIMER_OPTS_USE_COMPARE 0x80000000 +#define USING_COMPARE(t) ((t)->opts & TIMER_OPTS_USE_COMPARE) + +static char *id_to_name[] = { + [T0_BOT] = "timer0_0", + [T0_TOP] = "timer0_1", + [T1_BOT] = "timer1_0", + [T1_TOP] = "timer1_1", +}; static int timer32_config(struct timer_s *t) { - u32 tcr = __raw_readl(t->base + TCR); - - /* disable timer */ - tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - __raw_writel(tcr, t->base + TCR); - - /* reset counter to zero, set new period */ - __raw_writel(0, t->base + t->tim_off); - __raw_writel(t->period, t->base + t->prd_off); - - /* Set enable mode */ - if (t->opts & TIMER_OPTS_ONESHOT) { - tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift; - } else if (t->opts & TIMER_OPTS_PERIODIC) { - tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; + u32 tcr; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + if (USING_COMPARE(t)) { + struct davinci_timer_instance *dtip = + soc_info->timer_info->timers; + int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id); + + /* + * Next interrupt should be the current time reg value plus + * the new period (using 32-bit unsigned addition/wrapping + * to 0 on overflow). This assumes that the clocksource + * is setup to count to 2^32-1 before wrapping around to 0. + */ + __raw_writel(__raw_readl(t->base + t->tim_off) + t->period, + t->base + dtip[event_timer].cmp_off); + } else { + tcr = __raw_readl(t->base + TCR); + + /* disable timer */ + tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); + __raw_writel(tcr, t->base + TCR); + + /* reset counter to zero, set new period */ + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); + + /* Set enable mode */ + if (t->opts & TIMER_OPTS_ONESHOT) + tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift; + else if (t->opts & TIMER_OPTS_PERIODIC) + tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; + + __raw_writel(tcr, t->base + TCR); } - - __raw_writel(tcr, t->base + TCR); return 0; } @@ -182,13 +201,14 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct davinci_timer_instance *dtip = soc_info->timer_info->timers; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { u32 tgcr; - void __iomem *base = IO_ADDRESS(phys_bases[i]); + void __iomem *base = dtip[i].base; /* Disabled, Internal clock source */ __raw_writel(0, base + TCR); @@ -214,33 +234,33 @@ static void __init timer_init(void) /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; - u32 phys_base; - - if (t->name) { - t->id = i; - phys_base = (IS_TIMER1(t->id) ? - DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); - t->base = IO_ADDRESS(phys_base); - - if (IS_TIMER_BOT(t->id)) { - t->enamode_shift = 6; - t->tim_off = TIM12; - t->prd_off = PRD12; - } else { - t->enamode_shift = 22; - t->tim_off = TIM34; - t->prd_off = PRD34; - } - - /* Register interrupt */ - t->irqaction.name = t->name; - t->irqaction.dev_id = (void *)t; - if (t->irqaction.handler != NULL) { - setup_irq(timer_irqs[t->id], &t->irqaction); - } - - timer32_config(&timers[i]); + int timer = ID_TO_TIMER(t->id); + u32 irq; + + t->base = dtip[timer].base; + + if (IS_TIMER_BOT(t->id)) { + t->enamode_shift = 6; + t->tim_off = TIM12; + t->prd_off = PRD12; + irq = dtip[timer].bottom_irq; + } else { + t->enamode_shift = 22; + t->tim_off = TIM34; + t->prd_off = PRD34; + irq = dtip[timer].top_irq; + } + + /* Register interrupt */ + t->irqaction.name = t->name; + t->irqaction.dev_id = (void *)t; + + if (t->irqaction.handler != NULL) { + irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; + setup_irq(irq, &t->irqaction); } + + timer32_config(&timers[i]); } } @@ -255,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs) } static struct clocksource clocksource_davinci = { - .name = "timer0_1", .rating = 300, .read = read_cycles, .mask = CLOCKSOURCE_MASK(32), @@ -284,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: t->period = davinci_clock_tick_rate / (HZ); - t->opts = TIMER_OPTS_PERIODIC; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_PERIODIC; timer32_config(t); break; case CLOCK_EVT_MODE_ONESHOT: - t->opts = TIMER_OPTS_ONESHOT; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_ONESHOT; break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - t->opts = TIMER_OPTS_DISABLED; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_DISABLED; break; case CLOCK_EVT_MODE_RESUME: break; @@ -300,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_davinci = { - .name = "timer0_0", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .set_next_event = davinci_set_next_event, @@ -311,10 +332,42 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { struct clk *timer_clk; - + struct davinci_soc_info *soc_info = &davinci_soc_info; + unsigned int clockevent_id; + unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + clockevent_id = soc_info->timer_info->clockevent_id; + clocksource_id = soc_info->timer_info->clocksource_id; + + timers[TID_CLOCKEVENT].id = clockevent_id; + timers[TID_CLOCKSOURCE].id = clocksource_id; + + /* + * If using same timer for both clock events & clocksource, + * a compare register must be used to generate an event interrupt. + * This is equivalent to a oneshot timer only (not periodic). + */ + if (clockevent_id == clocksource_id) { + struct davinci_timer_instance *dtip = + soc_info->timer_info->timers; + int event_timer = ID_TO_TIMER(clockevent_id); + + /* Only bottom timers can use compare regs */ + if (IS_TIMER_TOP(clockevent_id)) + pr_warning("davinci_timer_init: Invalid use" + " of system timers. Results unpredictable.\n"); + else if ((dtip[event_timer].cmp_off == 0) + || (dtip[event_timer].cmp_irq == 0)) + pr_warning("davinci_timer_init: Invalid timer instance" + " setup. Results unpredictable.\n"); + else { + timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE; + clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT; + } + } + /* init timer hw */ timer_init(); @@ -325,6 +378,7 @@ static void __init davinci_timer_init(void) davinci_clock_tick_rate = clk_get_rate(timer_clk); /* setup clocksource */ + clocksource_davinci.name = id_to_name[clocksource_id]; clocksource_davinci.mult = clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); @@ -332,12 +386,12 @@ static void __init davinci_timer_init(void) printk(err, clocksource_davinci.name); /* setup clockevent */ + clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id]; clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); - clockevent_davinci.min_delta_ns = - clockevent_delta2ns(1, &clockevent_davinci); + clockevent_davinci.min_delta_ns = 50000; /* 50 usec */ clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); @@ -349,15 +403,14 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ -void davinci_watchdog_reset(void) { +void davinci_watchdog_reset(void) +{ u32 tgcr, wdtcr; - void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); - struct device dev; + struct davinci_soc_info *soc_info = &davinci_soc_info; + void __iomem *base = soc_info->wdt_base; struct clk *wd_clk; - char *name = "watchdog"; - dev_set_name(&dev, name); - wd_clk = clk_get(&dev, NULL); + wd_clk = clk_get(&davinci_wdt_device.dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; clk_enable(wd_clk); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 56bddce..d7291c6 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -9,87 +9,135 @@ config CRUNCH comment "EP93xx Platforms" +choice + prompt "EP93xx first SDRAM bank selection" + default EP93XX_SDCE3_SYNC_PHYS_OFFSET + +config EP93XX_SDCE3_SYNC_PHYS_OFFSET + bool "0x00000000 - SDCE3/SyncBoot" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0x00000000 + +config EP93XX_SDCE0_PHYS_OFFSET + bool "0xc0000000 - SDCEO" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xc0000000 + +endchoice + config MACH_ADSSPHERE bool "Support ADS Sphere" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the ADS Sphere board. +config MACH_EDB93XX + bool + +config MACH_EDB9301 + bool "Support Cirrus Logic EDB9301" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9301 Evaluation Board. + config MACH_EDB9302 bool "Support Cirrus Logic EDB9302" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302 Evaluation Board. config MACH_EDB9302A bool "Support Cirrus Logic EDB9302A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302A Evaluation Board. config MACH_EDB9307 bool "Support Cirrus Logic EDB9307" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9307 Evaluation Board. config MACH_EDB9307A bool "Support Cirrus Logic EDB9307A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9307A Evaluation Board. config MACH_EDB9312 bool "Support Cirrus Logic EDB9312" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9312 Evaluation Board. config MACH_EDB9315 bool "Support Cirrus Logic EDB9315" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315 Evaluation Board. config MACH_EDB9315A bool "Support Cirrus Logic EDB9315A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315A Evaluation Board. config MACH_GESBC9312 + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "Support Glomation GESBC-9312-sx" help Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board. config MACH_MICRO9 - bool - default n + bool config MACH_MICRO9H - bool "Support Contec Hypercontrol Micro9-H" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-H board. + bool "Support Contec Hypercontrol Micro9-H" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-H board. config MACH_MICRO9M - bool "Support Contec Hypercontrol Micro9-M" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-M board. + bool "Support Contec Hypercontrol Micro9-M" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-M board. config MACH_MICRO9L - bool "Support Contec Hypercontrol Micro9-L" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-L board. + bool "Support Contec Hypercontrol Micro9-L" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-L board. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 9522e20..eae6199 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -7,13 +7,7 @@ obj-n := obj- := obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o -obj-$(CONFIG_MACH_EDB9302) += edb9302.o -obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o -obj-$(CONFIG_MACH_EDB9307) += edb9307.o -obj-$(CONFIG_MACH_EDB9307A) += edb9307a.o -obj-$(CONFIG_MACH_EDB9312) += edb9312.o -obj-$(CONFIG_MACH_EDB9315) += edb9315.o -obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o +obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index d5561ad..27a085a 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1,2 +1,5 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 + zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000 +params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 + + zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000 +params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index b2eede5..6c4c163 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -72,58 +72,58 @@ static struct clk clk_h; static struct clk clk_p; static struct clk clk_pll2; static struct clk clk_usb_host = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = EP93XX_SYSCON_CLOCK_USH_EN, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN, }; /* DMA Clocks */ static struct clk clk_m2p0 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00020000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0, }; static struct clk clk_m2p1 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00010000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1, }; static struct clk clk_m2p2 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00080000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2, }; static struct clk clk_m2p3 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00040000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3, }; static struct clk clk_m2p4 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00200000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4, }; static struct clk clk_m2p5 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00100000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5, }; static struct clk clk_m2p6 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00800000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6, }; static struct clk clk_m2p7 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00400000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7, }; static struct clk clk_m2p8 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x02000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8, }; static struct clk clk_m2p9 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x01000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9, }; static struct clk clk_m2m0 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x04000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0, }; static struct clk clk_m2m1 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x08000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1, }; #define INIT_CK(dev,con,ck) \ @@ -138,7 +138,7 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "hclk", &clk_h), INIT_CK(NULL, "pclk", &clk_p), INIT_CK(NULL, "pll2", &clk_pll2), - INIT_CK(NULL, "usb_host", &clk_usb_host), + INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), INIT_CK(NULL, "m2p0", &clk_m2p0), INIT_CK(NULL, "m2p1", &clk_m2p1), INIT_CK(NULL, "m2p2", &clk_m2p2), @@ -186,8 +186,8 @@ static unsigned long get_uart_rate(struct clk *clk) { u32 value; - value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL); - if (value & EP93XX_SYSCON_CLOCK_UARTBAUD) + value = __raw_readl(EP93XX_SYSCON_PWRCNT); + if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) return EP93XX_EXT_CLK_RATE; else return EP93XX_EXT_CLK_RATE / 2; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ae24486..204dc5c 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3]; static unsigned char gpio_int_enabled[3]; static unsigned char gpio_int_type1[3]; static unsigned char gpio_int_type2[3]; -static unsigned char gpio_int_debouce[3]; +static unsigned char gpio_int_debounce[3]; /* Port ordering is: A B F */ static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; @@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable) int port_mask = 1 << (line & 7); if (enable) - gpio_int_debouce[port] |= port_mask; + gpio_int_debounce[port] |= port_mask; else - gpio_int_debouce[port] &= ~port_mask; + gpio_int_debounce[port] &= ~port_mask; - __raw_writeb(gpio_int_debouce[port], + __raw_writeb(gpio_int_debounce[port], EP93XX_GPIO_REG(int_debounce_register_offset[port])); } EXPORT_SYMBOL(ep93xx_gpio_int_debounce); @@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void) { int gpio_irq; - vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); - vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); + vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); + vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); for (gpio_irq = gpio_to_irq(0); gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { @@ -450,10 +450,19 @@ static struct amba_device uart3_device = { }; +static struct resource ep93xx_rtc_resource[] = { + { + .start = EP93XX_RTC_PHYS_BASE, + .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device ep93xx_rtc_device = { - .name = "ep93xx-rtc", - .id = -1, - .num_resources = 0, + .name = "ep93xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), + .resource = ep93xx_rtc_resource, }; diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c deleted file mode 100644 index 8bf8d7c..0000000 --- a/arch/arm/mach-ep93xx/edb9302.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9302.c - * Cirrus Logic EDB9302 support. - * - * Copyright (C) 2006 George Kashperko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct physmap_flash_data edb9302_flash_data = { - .width = 2, -}; - -static struct resource edb9302_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9302_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9302_flash_data, - }, - .num_resources = 1, - .resource = &edb9302_flash_resource, -}; - -static struct ep93xx_eth_data edb9302_eth_data = { - .phy_id = 1, -}; - -static void __init edb9302_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9302_flash); - - ep93xx_register_eth(&edb9302_eth_data, 1); -} - -MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") - /* Maintainer: George Kashperko */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9302_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c deleted file mode 100644 index a352c57..0000000 --- a/arch/arm/mach-ep93xx/edb9302a.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9302a.c - * Cirrus Logic EDB9302A support. - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct physmap_flash_data edb9302a_flash_data = { - .width = 2, -}; - -static struct resource edb9302a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9302a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9302a_flash_data, - }, - .num_resources = 1, - .resource = &edb9302a_flash_resource, -}; - -static struct ep93xx_eth_data edb9302a_eth_data = { - .phy_id = 1, -}; - -static void __init edb9302a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9302a_flash); - - ep93xx_register_eth(&edb9302a_eth_data, 1); -} - -MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9302a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c deleted file mode 100644 index 5ab22f6..0000000 --- a/arch/arm/mach-ep93xx/edb9307.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9307.c - * Cirrus Logic EDB9307 support. - * - * Copyright (C) 2007 Herbert Valerio Riedel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct physmap_flash_data edb9307_flash_data = { - .width = 4, -}; - -static struct resource edb9307_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9307_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9307_flash_data, - }, - .num_resources = 1, - .resource = &edb9307_flash_resource, -}; - -static struct ep93xx_eth_data edb9307_eth_data = { - .phy_id = 1, -}; - -static void __init edb9307_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9307_flash); - - ep93xx_register_eth(&edb9307_eth_data, 1); -} - -MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") - /* Maintainer: Herbert Valerio Riedel */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9307_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c deleted file mode 100644 index 6171167..0000000 --- a/arch/arm/mach-ep93xx/edb9307a.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9307a.c - * Cirrus Logic EDB9307A support. - * - * Copyright (C) 2008 H Hartley Sweeten - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct physmap_flash_data edb9307a_flash_data = { - .width = 2, -}; - -static struct resource edb9307a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9307a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9307a_flash_data, - }, - .num_resources = 1, - .resource = &edb9307a_flash_resource, -}; - -static struct ep93xx_eth_data edb9307a_eth_data = { - .phy_id = 1, -}; - -static struct i2c_board_info __initdata edb9307a_i2c_data[] = { - { - /* On-board battery backed RTC */ - I2C_BOARD_INFO("isl1208", 0x6f), - }, - /* - * The I2C signals are also routed to the Expansion Connector (J4) - */ -}; - -static void __init edb9307a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9307a_flash); - - ep93xx_register_eth(&edb9307a_eth_data, 1); - - ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data)); -} - -MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") - /* Maintainer: H Hartley Sweeten */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9307a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c deleted file mode 100644 index d7179f6..0000000 --- a/arch/arm/mach-ep93xx/edb9312.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9312.c - * Cirrus Logic EDB9312 support. - * - * Copyright (C) 2006 Infosys Technologies Limited - * Toufeeq Hussain - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct physmap_flash_data edb9312_flash_data = { - .width = 4, -}; - -static struct resource edb9312_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9312_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9312_flash_data, - }, - .num_resources = 1, - .resource = &edb9312_flash_resource, -}; - -static struct ep93xx_eth_data edb9312_eth_data = { - .phy_id = 1, -}; - -static void __init edb9312_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9312_flash); - - ep93xx_register_eth(&edb9312_eth_data, 1); -} - -MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") - /* Maintainer: Toufeeq Hussain */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9312_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c deleted file mode 100644 index 025af6e..0000000 --- a/arch/arm/mach-ep93xx/edb9315.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9315.c - * Cirrus Logic EDB9315 support. - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct physmap_flash_data edb9315_flash_data = { - .width = 4, -}; - -static struct resource edb9315_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9315_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9315_flash_data, - }, - .num_resources = 1, - .resource = &edb9315_flash_resource, -}; - -static struct ep93xx_eth_data edb9315_eth_data = { - .phy_id = 1, -}; - -static void __init edb9315_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9315_flash); - - ep93xx_register_eth(&edb9315_eth_data, 1); -} - -MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9315_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c deleted file mode 100644 index 4c9cc8a..0000000 --- a/arch/arm/mach-ep93xx/edb9315a.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9315a.c - * Cirrus Logic EDB9315A support. - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct physmap_flash_data edb9315a_flash_data = { - .width = 2, -}; - -static struct resource edb9315a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9315a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9315a_flash_data, - }, - .num_resources = 1, - .resource = &edb9315a_flash_resource, -}; - -static struct ep93xx_eth_data edb9315a_eth_data = { - .phy_id = 1, -}; - -static void __init edb9315a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9315a_flash); - - ep93xx_register_eth(&edb9315a_eth_data, 1); -} - -MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9315a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c new file mode 100644 index 0000000..e9e45b9 --- /dev/null +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -0,0 +1,217 @@ +/* + * arch/arm/mach-ep93xx/edb93xx.c + * Cirrus Logic EDB93xx Development Board support. + * + * EDB93XX, EDB9301, EDB9307A + * Copyright (C) 2008-2009 H Hartley Sweeten + * + * EDB9302 + * Copyright (C) 2006 George Kashperko + * + * EDB9302A, EDB9315, EDB9315A + * Copyright (C) 2006 Lennert Buytenhek + * + * EDB9307 + * Copyright (C) 2007 Herbert Valerio Riedel + * + * EDB9312 + * Copyright (C) 2006 Infosys Technologies Limited + * Toufeeq Hussain + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct physmap_flash_data edb93xx_flash_data; + +static struct resource edb93xx_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device edb93xx_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &edb93xx_flash_data, + }, + .num_resources = 1, + .resource = &edb93xx_flash_resource, +}; + +static void __init __edb93xx_register_flash(unsigned int width, + resource_size_t start, resource_size_t size) +{ + edb93xx_flash_data.width = width; + edb93xx_flash_resource.start = start; + edb93xx_flash_resource.end = start + size - 1; + + platform_device_register(&edb93xx_flash); +} + +static void __init edb93xx_register_flash(void) +{ + if (machine_is_edb9307() || machine_is_edb9312() || + machine_is_edb9315()) { + __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); + } else { + __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); + } +} + +static struct ep93xx_eth_data edb93xx_eth_data = { + .phy_id = 1, +}; + +static struct i2c_board_info __initdata edb93xxa_i2c_data[] = { + { + I2C_BOARD_INFO("isl1208", 0x6f), + }, +}; + +static struct i2c_board_info __initdata edb93xx_i2c_data[] = { + { + I2C_BOARD_INFO("ds1337", 0x68), + }, +}; + +static void __init edb93xx_register_i2c(void) +{ + if (machine_is_edb9302a() || machine_is_edb9307a() || + machine_is_edb9315a()) { + ep93xx_register_i2c(edb93xxa_i2c_data, + ARRAY_SIZE(edb93xxa_i2c_data)); + } else if (machine_is_edb9307() || machine_is_edb9312() || + machine_is_edb9315()) { + ep93xx_register_i2c(edb93xx_i2c_data, + ARRAY_SIZE(edb93xx_i2c_data)); + } +} + +static void __init edb93xx_init_machine(void) +{ + ep93xx_init_devices(); + edb93xx_register_flash(); + ep93xx_register_eth(&edb93xx_eth_data, 1); + edb93xx_register_i2c(); +} + + +#ifdef CONFIG_MACH_EDB9301 +MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") + /* Maintainer: H Hartley Sweeten */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9302 +MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") + /* Maintainer: George Kashperko */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9302A +MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") + /* Maintainer: Lennert Buytenhek */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9307 +MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") + /* Maintainer: Herbert Valerio Riedel */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9307A +MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") + /* Maintainer: H Hartley Sweeten */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9312 +MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") + /* Maintainer: Toufeeq Hussain */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9315 +MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") + /* Maintainer: Lennert Buytenhek */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9315A +MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") + /* Maintainer: Lennert Buytenhek */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 1732de7..967c079 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -147,13 +147,27 @@ #define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) #define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) +#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000) #define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) #define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) #define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000 -#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000 +#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) +#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) +#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) +#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) #define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) #define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h index 5c80c3c..925b12e 100644 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ b/arch/arm/mach-ep93xx/include/mach/memory.h @@ -5,6 +5,12 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H +#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) #define PHYS_OFFSET UL(0x00000000) +#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xc0000000) +#else +#error "Kconfig bug: No EP93xx PHYS_OFFSET set" +#endif #endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig deleted file mode 100644 index cddd194..0000000 --- a/arch/arm/mach-imx/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -menu "IMX Implementations" - depends on ARCH_IMX - -config ARCH_MX1ADS - bool "mx1ads" - depends on ARCH_IMX - select ISA - help - Say Y here if you are using the Motorola MX1ADS board - -endmenu diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile deleted file mode 100644 index b047c7e..0000000 --- a/arch/arm/mach-imx/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y += irq.o time.o dma.o generic.o clock.o - -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o - -# Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o - -# Support for blinky lights -led-y := leds.o - -obj-$(CONFIG_LEDS) += $(led-y) -led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot deleted file mode 100644 index fd72ce5..0000000 --- a/arch/arm/mach-imx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX1ADS) := 0x08008000 - diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c deleted file mode 100644 index cf332ae..0000000 --- a/arch/arm/mach-imx/clock.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#include - -/* - * Very simple approach: We can't disable clocks, so we do - * not need refcounting - */ - -struct clk { - struct list_head node; - const char *name; - unsigned long (*get_rate)(void); -}; - -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref) -{ - unsigned long long ll; - unsigned long quot; - - u32 mfi = (pll >> 10) & 0xf; - u32 mfn = pll & 0x3ff; - u32 mfd = (pll >> 16) & 0x3ff; - u32 pd = (pll >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - ll = 2 * (unsigned long long)f_ref * - ((mfi << 16) + (mfn << 16) / (mfd + 1)); - quot = (pd + 1) * (1 << 16); - ll += quot / 2; - do_div(ll, quot); - return (unsigned long)ll; -} - -static unsigned long imx_get_system_clk(void) -{ - u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); - - return imx_decode_pll(SPCTL0, f_ref); -} - -static unsigned long imx_get_mcu_clk(void) -{ - return imx_decode_pll(MPCTL0, CLK32 * 512); -} - -/* - * get peripheral clock 1 ( UART[12], Timer[12], PWM ) - */ -static unsigned long imx_get_perclk1(void) -{ - return imx_get_system_clk() / (((PCDR) & 0xf)+1); -} - -/* - * get peripheral clock 2 ( LCD, SD, SPI[12] ) - */ -static unsigned long imx_get_perclk2(void) -{ - return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); -} - -/* - * get peripheral clock 3 ( SSI ) - */ -static unsigned long imx_get_perclk3(void) -{ - return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); -} - -/* - * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) - */ -static unsigned long imx_get_hclk(void) -{ - return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); -} - -static struct clk clk_system_clk = { - .name = "system_clk", - .get_rate = imx_get_system_clk, -}; - -static struct clk clk_hclk = { - .name = "hclk", - .get_rate = imx_get_hclk, -}; - -static struct clk clk_mcu_clk = { - .name = "mcu_clk", - .get_rate = imx_get_mcu_clk, -}; - -static struct clk clk_perclk1 = { - .name = "perclk1", - .get_rate = imx_get_perclk1, -}; - -static struct clk clk_uart_clk = { - .name = "uart_clk", - .get_rate = imx_get_perclk1, -}; - -static struct clk clk_perclk2 = { - .name = "perclk2", - .get_rate = imx_get_perclk2, -}; - -static struct clk clk_perclk3 = { - .name = "perclk3", - .get_rate = imx_get_perclk3, -}; - -static struct clk *clks[] = { - &clk_perclk1, - &clk_perclk2, - &clk_perclk3, - &clk_system_clk, - &clk_hclk, - &clk_mcu_clk, - &clk_uart_clk, -}; - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { - if (!strcmp(p->name, id)) { - clk = p; - goto found; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->get_rate(); -} -EXPORT_SYMBOL(clk_get_rate); - -int imx_clocks_init(void) -{ - int i; - - mutex_lock(&clocks_mutex); - for (i = 0; i < ARRAY_SIZE(clks); i++) - list_add(&clks[i]->node, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} - diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c deleted file mode 100644 index 434b4ca..0000000 --- a/arch/arm/mach-imx/cpufreq.c +++ /dev/null @@ -1,315 +0,0 @@ -/* - * cpu.c: clock scaling for the iMX - * - * Copyright (C) 2000 2001, The Delft University of Technology - * Copyright (c) 2004 Sascha Hauer - * Copyright (C) 2006 Inky Lung - * Copyright (C) 2006 Pavel Pisa, PiKRON - * - * Based on SA1100 version written by: - * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version - * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -/*#define DEBUG*/ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "generic.h" - -#ifndef __val2mfld -#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask)) -#endif -#ifndef __mfld2val -#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1))) -#endif - -#define CR_920T_CLOCK_MODE 0xC0000000 -#define CR_920T_FASTBUS_MODE 0x00000000 -#define CR_920T_ASYNC_MODE 0xC0000000 - -static u32 mpctl0_at_boot; -static u32 bclk_div_at_boot; - -static struct clk *system_clk, *mcu_clk; - -static void imx_set_async_mode(void) -{ - adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE); -} - -static void imx_set_fastbus_mode(void) -{ - adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE); -} - -static void imx_set_mpctl0(u32 mpctl0) -{ - unsigned long flags; - - if (mpctl0 == 0) { - local_irq_save(flags); - CSCR &= ~CSCR_MPEN; - local_irq_restore(flags); - return; - } - - local_irq_save(flags); - MPCTL0 = mpctl0; - CSCR |= CSCR_MPEN; - local_irq_restore(flags); -} - -/** - * imx_compute_mpctl - compute new PLL parameters - * @new_mpctl: pointer to location assigned by new PLL control register value - * @cur_mpctl: current PLL control register parameters - * @f_ref: reference source frequency Hz - * @freq: required frequency in Hz - * @relation: is one of %CPUFREQ_RELATION_L (supremum) - * and %CPUFREQ_RELATION_H (infimum) - */ -long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation) -{ - u32 mfi; - u32 mfn; - u32 mfd; - u32 pd; - unsigned long long ll; - long l; - long quot; - - /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */ - /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */ - - if (cur_mpctl) { - mfd = ((cur_mpctl >> 16) & 0x3ff) + 1; - pd = ((cur_mpctl >> 26) & 0xf) + 1; - } else { - pd=2; mfd=313; - } - - /* pd=2; mfd=313; mfi=8; mfn=183; */ - /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */ - - quot = (f_ref + (1 << 9)) >> 10; - l = (freq * pd + quot) / (2 * quot); - mfi = l >> 10; - mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10; - - mfd -= 1; - pd -= 1; - - *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16) - | ((pd & 0xf) << 26); - - ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); - quot = (pd+1) * (1<<16); - ll += quot / 2; - do_div(ll, quot); - freq = ll; - - pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n", - pd, mfd, mfi, mfn, freq); - - return freq; -} - - -static int imx_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - return 0; -} - -static unsigned int imx_get_speed(unsigned int cpu) -{ - unsigned int freq; - unsigned int cr; - unsigned int cscr; - unsigned int bclk_div; - - if (cpu) - return 0; - - cscr = CSCR; - bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1; - cr = get_cr(); - - if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) { - freq = clk_get_rate(system_clk); - freq = (freq + bclk_div/2) / bclk_div; - } else { - freq = clk_get_rate(mcu_clk); - if (cscr & CSCR_MPU_PRESC) - freq /= 2; - } - - freq = (freq + 500) / 1000; - - return freq; -} - -static int imx_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - u32 mpctl0 = 0; - u32 cscr; - unsigned long flags; - long freq; - long sysclk; - unsigned int bclk_div = bclk_div_at_boot; - - /* - * Some governors do not respects CPU and policy lower limits - * which leads to bad things (division by zero etc), ensure - * that such things do not happen. - */ - if(target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - - if(target_freq < policy->min) - target_freq = policy->min; - - freq = target_freq * 1000; - - pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", - freq, mpctl0_at_boot); - - sysclk = clk_get_rate(system_clk); - - if (freq > sysclk / bclk_div_at_boot + 1000000) { - freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation); - if (freq < 0) { - printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq); - return -EINVAL; - } - } else { - if(freq + 1000 < sysclk) { - if (relation == CPUFREQ_RELATION_L) - bclk_div = (sysclk - 1000) / freq; - else - bclk_div = (sysclk + freq + 1000) / freq; - - if(bclk_div > 16) - bclk_div = 16; - if(bclk_div < bclk_div_at_boot) - bclk_div = bclk_div_at_boot; - } - freq = (sysclk + bclk_div / 2) / bclk_div; - } - - freqs.old = imx_get_speed(0); - freqs.new = (freq + 500) / 1000; - freqs.cpu = 0; - freqs.flags = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_save(flags); - - imx_set_fastbus_mode(); - - imx_set_mpctl0(mpctl0); - - cscr = CSCR; - cscr &= ~CSCR_BCLK_DIV; - cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1); - CSCR = cscr; - - if(mpctl0) { - CSCR |= CSCR_MPLL_RESTART; - - /* Wait until MPLL is stabilized */ - while( CSCR & CSCR_MPLL_RESTART ); - - imx_set_async_mode(); - } - - local_irq_restore(flags); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n", - freq, mpctl0? "MPLL": "SPLL"); - - return 0; -} - -static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy) -{ - printk(KERN_INFO "i.MX cpu freq change driver v1.0\n"); - - if (policy->cpu != 0) - return -EINVAL; - - policy->cur = policy->min = policy->max = imx_get_speed(0); - policy->cpuinfo.min_freq = 8000; - policy->cpuinfo.max_freq = 200000; - /* Manual states, that PLL stabilizes in two CLK32 periods */ - policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32; - return 0; -} - -static struct cpufreq_driver imx_driver = { - .flags = CPUFREQ_STICKY, - .verify = imx_verify_speed, - .target = imx_set_target, - .get = imx_get_speed, - .init = imx_cpufreq_driver_init, - .name = "imx", -}; - -static int __init imx_cpufreq_init(void) -{ - bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1; - mpctl0_at_boot = 0; - - system_clk = clk_get(NULL, "system_clk"); - if (IS_ERR(system_clk)) - return PTR_ERR(system_clk); - - mcu_clk = clk_get(NULL, "mcu_clk"); - if (IS_ERR(mcu_clk)) { - clk_put(system_clk); - return PTR_ERR(mcu_clk); - } - - if((CSCR & CSCR_MPEN) && - ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE)) - mpctl0_at_boot = MPCTL0; - - return cpufreq_register_driver(&imx_driver); -} - -arch_initcall(imx_cpufreq_init); - diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c deleted file mode 100644 index 1536583..0000000 --- a/arch/arm/mach-imx/dma.c +++ /dev/null @@ -1,597 +0,0 @@ -/* - * linux/arch/arm/mach-imx/dma.c - * - * imx DMA registration and IRQ dispatching - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * 2004-03-03 Sascha Hauer - * initial version heavily inspired by - * linux/arch/arm/mach-pxa/dma.c - * - * 2005-04-17 Pavel Pisa - * Changed to support scatter gather DMA - * by taking Russell's code from RiscPC - * - * 2006-05-31 Pavel Pisa - * Corrected error handling code. - * - */ - -#undef DEBUG - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -/* - * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation - * @dma_ch: i.MX DMA channel number - * @lastcount: number of bytes transferred during last transfer - * - * Functions prepares DMA controller for next sg data chunk transfer. - * The @lastcount argument informs function about number of bytes transferred - * during last block. Zero value can be used for @lastcount to setup DMA - * for the first chunk. - */ -static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned int nextcount; - unsigned int nextaddr; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return 0; - } - - imxdma->resbytes -= lastcount; - - if (!imxdma->sg) { - pr_debug("imxdma%d: no sg data\n", dma_ch); - return 0; - } - - imxdma->sgbc += lastcount; - if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) { - if ((imxdma->sgcount <= 1) || !imxdma->resbytes) { - pr_debug("imxdma%d: sg transfer limit reached\n", - dma_ch); - imxdma->sgcount=0; - imxdma->sg = NULL; - return 0; - } else { - imxdma->sgcount--; - imxdma->sg++; - imxdma->sgbc = 0; - } - } - nextcount = imxdma->sg->length - imxdma->sgbc; - nextaddr = imxdma->sg->dma_address + imxdma->sgbc; - - if(imxdma->resbytes < nextcount) - nextcount = imxdma->resbytes; - - if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - DAR(dma_ch) = nextaddr; - else - SAR(dma_ch) = nextaddr; - - CNTR(dma_ch) = nextcount; - pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n", - dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch)); - - return nextcount; -} - -/* - * imx_dma_setup_sg_base - scatter-gather DMA emulation - * @dma_ch: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * - * Functions sets up i.MX DMA state for emulated scatter-gather transfer - * and sets up channel registers to be ready for the first chunk - */ -static int -imx_dma_setup_sg_base(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = sg; - imxdma->sgcount = sgcount; - imxdma->sgbc = 0; - return imx_dma_sg_next(dma_ch, 0); -} - -/** - * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer - * @dma_ch: i.MX DMA channel number - * @dma_address: the DMA/physical memory address of the linear data block - * to transfer - * @dma_length: length of the data block in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function setups DMA channel source and destination addresses for transfer - * specified by provided parameters. The scatter-gather emulation is disabled, - * because linear data block - * form the physical address range is transferred. - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = NULL; - imxdma->sgcount = 0; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!dma_address) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", - dma_ch); - return -EINVAL; - } - - if (!dma_length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", - dma_ch); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n", - dma_ch, (unsigned int)dma_address, dma_length, - dev_addr); - SAR(dma_ch) = dev_addr; - DAR(dma_ch) = (unsigned int)dma_address; - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n", - dma_ch, (unsigned int)dma_address, dma_length, - dev_addr); - SAR(dma_ch) = (unsigned int)dma_address; - DAR(dma_ch) = dev_addr; - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", - dma_ch); - return -EINVAL; - } - - CNTR(dma_ch) = dma_length; - - return 0; -} - -/** - * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer - * @dma_ch: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * @dma_length: total length of the transfer request in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function sets up DMA channel state and registers to be ready for transfer - * specified by provided parameters. The scatter-gather emulation is set up - * according to the parameters. - * - * The full preparation of the transfer requires setup of more register - * by the caller before imx_dma_enable() can be called. - * - * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes - * - * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx - * - * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical - * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified - * - * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x - * - * The typical setup for %DMA_MODE_WRITE is specified by next options combination - * - * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x - * - * Be careful here and do not mistakenly mix source and target device - * port sizes constants, they are really different: - * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, - * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode) -{ - int res; - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = NULL; - imxdma->sgcount = 0; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n", - dma_ch); - return -EINVAL; - } - - if (!sg->length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", - dma_ch); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n", - dma_ch, sg, sgcount, dma_length, dev_addr); - SAR(dma_ch) = dev_addr; - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n", - dma_ch, sg, sgcount, dma_length, dev_addr); - DAR(dma_ch) = dev_addr; - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", - dma_ch); - return -EINVAL; - } - - res = imx_dma_setup_sg_base(dma_ch, sg, sgcount); - if (res <= 0) { - printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch); - return -EINVAL; - } - - return 0; -} - -/** - * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers - * @dma_ch: i.MX DMA channel number - * @irq_handler: the pointer to the function called if the transfer - * ends successfully - * @err_handler: the pointer to the function called if the premature - * end caused by error occurs - * @data: user specified value to be passed to the handlers - */ -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), - void *data) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return -ENODEV; - } - - local_irq_save(flags); - DISR = (1 << dma_ch); - imxdma->irq_handler = irq_handler; - imxdma->err_handler = err_handler; - imxdma->data = data; - local_irq_restore(flags); - return 0; -} - -/** - * imx_dma_enable - function to start i.MX DMA channel operation - * @dma_ch: i.MX DMA channel number - * - * The channel has to be allocated by driver through imx_dma_request() - * or imx_dma_request_by_prio() function. - * The transfer parameters has to be set to the channel registers through - * call of the imx_dma_setup_single() or imx_dma_setup_sg() function - * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to - * be set prior this function call by the channel user. - */ -void imx_dma_enable(imx_dmach_t dma_ch) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_enable\n", dma_ch); - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - DISR = (1 << dma_ch); - DIMR &= ~(1 << dma_ch); - CCR(dma_ch) |= CCR_CEN; - local_irq_restore(flags); -} - -/** - * imx_dma_disable - stop, finish i.MX DMA channel operatin - * @dma_ch: i.MX DMA channel number - */ -void imx_dma_disable(imx_dmach_t dma_ch) -{ - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_disable\n", dma_ch); - - local_irq_save(flags); - DIMR |= (1 << dma_ch); - CCR(dma_ch) &= ~CCR_CEN; - DISR = (1 << dma_ch); - local_irq_restore(flags); -} - -/** - * imx_dma_request - request/allocate specified channel number - * @dma_ch: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - */ -int imx_dma_request(imx_dmach_t dma_ch, const char *name) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - if (dma_ch >= IMX_DMA_CHANNELS) { - printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __func__, dma_ch); - return -EINVAL; - } - - local_irq_save(flags); - if (imxdma->name) { - local_irq_restore(flags); - return -ENODEV; - } - - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - local_irq_restore(flags); - return 0; -} - -/** - * imx_dma_free - release previously acquired channel - * @dma_ch: i.MX DMA channel number - */ -void imx_dma_free(imx_dmach_t dma_ch) -{ - unsigned long flags; - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - if (!imxdma->name) { - printk(KERN_CRIT - "%s: trying to free channel %d which is already freed\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - /* Disable interrupts */ - DIMR |= (1 << dma_ch); - CCR(dma_ch) &= ~CCR_CEN; - imxdma->name = NULL; - local_irq_restore(flags); -} - -/** - * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority - * @name: the driver/caller own non-%NULL identification - * @prio: one of the hardware distinguished priority level: - * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW - * - * This function tries to find free channel in the specified priority group - * if the priority cannot be achieved it tries to look for free channel - * in the higher and then even lower priority groups. - * - * Return value: If there is no free channel to allocate, -%ENODEV is returned. - * On successful allocation channel is returned. - */ -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio) -{ - int i; - int best; - - switch (prio) { - case (DMA_PRIO_HIGH): - best = 8; - break; - case (DMA_PRIO_MEDIUM): - best = 4; - break; - case (DMA_PRIO_LOW): - default: - best = 0; - break; - } - - for (i = best; i < IMX_DMA_CHANNELS; i++) { - if (!imx_dma_request(i, name)) { - return i; - } - } - - for (i = best - 1; i >= 0; i--) { - if (!imx_dma_request(i, name)) { - return i; - } - } - - printk(KERN_ERR "%s: no free DMA channel found\n", __func__); - - return -ENODEV; -} - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, disr = DISR; - struct imx_dma_channel *channel; - unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR; - int errcode; - - DISR = disr & err_mask; - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if(!(err_mask & (1 << i))) - continue; - channel = &imx_dma_channels[i]; - errcode = 0; - - if (DBTOSR & (1 << i)) { - DBTOSR = (1 << i); - errcode |= IMX_DMA_ERR_BURST; - } - if (DRTOSR & (1 << i)) { - DRTOSR = (1 << i); - errcode |= IMX_DMA_ERR_REQUEST; - } - if (DSESR & (1 << i)) { - DSESR = (1 << i); - errcode |= IMX_DMA_ERR_TRANSFER; - } - if (DBOSR & (1 << i)) { - DBOSR = (1 << i); - errcode |= IMX_DMA_ERR_BUFFER; - } - - /* - * The cleaning of @sg field would be questionable - * there, because its value can help to compute - * remaining/transferred bytes count in the handler - */ - /*imx_dma_channels[i].sg = NULL;*/ - - if (channel->name && channel->err_handler) { - channel->err_handler(i, channel->data, errcode); - continue; - } - - imx_dma_channels[i].sg = NULL; - - printk(KERN_WARNING - "DMA timeout on channel %d (%s) -%s%s%s%s\n", - i, channel->name, - errcode&IMX_DMA_ERR_BURST? " burst":"", - errcode&IMX_DMA_ERR_REQUEST? " request":"", - errcode&IMX_DMA_ERR_TRANSFER? " transfer":"", - errcode&IMX_DMA_ERR_BUFFER? " buffer":""); - } - return IRQ_HANDLED; -} - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, disr = DISR; - - pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", - disr); - - DISR = disr; - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (disr & (1 << i)) { - struct imx_dma_channel *channel = &imx_dma_channels[i]; - if (channel->name) { - if (imx_dma_sg_next(i, CNTR(i))) { - CCR(i) &= ~CCR_CEN; - mb(); - CCR(i) |= CCR_CEN; - } else { - if (channel->irq_handler) - channel->irq_handler(i, - channel->data); - } - } else { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", i); - } - } - } - return IRQ_HANDLED; -} - -static int __init imx_dma_init(void) -{ - int ret; - int i; - - /* reset DMA module */ - DCR = DCR_DRST; - - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n"); - free_irq(DMA_INT, NULL); - } - - /* enable DMA module */ - DCR = DCR_DEN; - - /* clear all interrupts */ - DISR = (1 << IMX_DMA_CHANNELS) - 1; - - /* enable interrupts */ - DIMR = (1 << IMX_DMA_CHANNELS) - 1; - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - imx_dma_channels[i].sg = NULL; - imx_dma_channels[i].dma_num = i; - } - - return ret; -} - -arch_initcall(imx_dma_init); - -EXPORT_SYMBOL(imx_dma_setup_single); -EXPORT_SYMBOL(imx_dma_setup_sg); -EXPORT_SYMBOL(imx_dma_setup_handlers); -EXPORT_SYMBOL(imx_dma_enable); -EXPORT_SYMBOL(imx_dma_disable); -EXPORT_SYMBOL(imx_dma_request); -EXPORT_SYMBOL(imx_dma_free); -EXPORT_SYMBOL(imx_dma_request_by_prio); -EXPORT_SYMBOL(imx_dma_channels); diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c deleted file mode 100644 index 05f1739..0000000 --- a/arch/arm/mach-imx/generic.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * arch/arm/mach-imx/generic.c - * - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG]; - -void imx_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int tmp; - - /* Pullup enable */ - if(gpio_mode & GPIO_PUEN) - PUEN(port) |= (1<> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - ICONFB1(port) &= ~( 3<<(pin*2)); - ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - } else { - tmp = OCR2(port); - tmp &= ~( 3<<((pin-16)*2)); - tmp |= (ocr << ((pin-16)*2)); - OCR2(port) = tmp; - - ICONFA2(port) &= ~( 3<<((pin-16)*2)); - ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2); - ICONFB2(port) &= ~( 3<<((pin-16)*2)); - ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2); - } -} - -EXPORT_SYMBOL(imx_gpio_mode); - -int imx_gpio_request(unsigned gpio, const char *label) -{ - if(gpio >= (GPIO_PORT_MAX + 1) * 32) { - printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n", - gpio, label ? label : "?"); - return -EINVAL; - } - - if(test_and_set_bit(gpio, imx_gpio_alloc_map)) { - printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n", - gpio, label ? label : "?"); - return -EBUSY; - } - - return 0; -} - -EXPORT_SYMBOL(imx_gpio_request); - -void imx_gpio_free(unsigned gpio) -{ - if(gpio >= (GPIO_PORT_MAX + 1) * 32) - return; - - clear_bit(gpio, imx_gpio_alloc_map); -} - -EXPORT_SYMBOL(imx_gpio_free); - -int imx_gpio_direction_input(unsigned gpio) -{ - imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR); - return 0; -} - -EXPORT_SYMBOL(imx_gpio_direction_input); - -int imx_gpio_direction_output(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); - imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR); - return 0; -} - -EXPORT_SYMBOL(imx_gpio_direction_output); - -int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label) -{ - const int *p = pin_list; - int i; - unsigned gpio; - unsigned mode; - - for (i = 0; i < count; i++) { - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); - - if (gpio >= (GPIO_PORT_MAX + 1) * 32) - goto setup_error; - - if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE) - imx_gpio_free(gpio); - else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC)) - if (imx_gpio_request(gpio, label)) - if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) - goto setup_error; - - if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY | - IMX_GPIO_ALLOC_MODE_RELEASE))) - imx_gpio_mode(gpio | mode); - - p++; - } - return 0; - -setup_error: - if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC | - IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) - return -EINVAL; - - while (p != pin_list) { - p--; - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - imx_gpio_free(gpio); - } - - return -EINVAL; -} - -EXPORT_SYMBOL(imx_gpio_setup_multiple_pins); - -void __imx_gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value_inline(gpio, value); -} - -EXPORT_SYMBOL(__imx_gpio_set_value); - -int imx_gpio_to_irq(unsigned gpio) -{ - return IRQ_GPIOA(0) + gpio; -} - -EXPORT_SYMBOL(imx_gpio_to_irq); - -int imx_irq_to_gpio(unsigned irq) -{ - if (irq < IRQ_GPIOA(0)) - return -EINVAL; - return irq - IRQ_GPIOA(0); -} - -EXPORT_SYMBOL(imx_irq_to_gpio); - -static struct resource imx_mmc_resources[] = { - [0] = { - .start = 0x00214000, - .end = 0x002140FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (SDHC_INT), - .end = (SDHC_INT), - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 imxmmmc_dmamask = 0xffffffffUL; - -static struct platform_device imx_mmc_device = { - .name = "imx-mmc", - .id = 0, - .dev = { - .dma_mask = &imxmmmc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(imx_mmc_resources), - .resource = imx_mmc_resources, -}; - -void __init imx_set_mmc_info(struct imxmmc_platform_data *info) -{ - imx_mmc_device.dev.platform_data = info; -} - -static struct platform_device *devices[] __initdata = { - &imx_mmc_device, -}; - -static struct map_desc imx_io_desc[] __initdata = { - { - .virtual = IMX_IO_BASE, - .pfn = __phys_to_pfn(IMX_IO_PHYS), - .length = IMX_IO_SIZE, - .type = MT_DEVICE - } -}; - -void __init -imx_map_io(void) -{ - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); -} - -static int __init imx_init(void) -{ - return platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -subsys_initcall(imx_init); diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h deleted file mode 100644 index e91003e..0000000 --- a/arch/arm/mach-imx/generic.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/arch/arm/mach-imx/generic.h - * - * Author: Sascha Hauer - * Copyright: Synertronixx GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -extern void __init imx_map_io(void); -extern void __init imx_init_irq(void); - -struct sys_timer; -extern struct sys_timer imx_timer; diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S deleted file mode 100644 index 87802bb..0000000 --- a/arch/arm/mach-imx/include/mach/debug-macro.S +++ /dev/null @@ -1,34 +0,0 @@ -/* arch/arm/mach-imx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00000000 @ physical - movne \rx, #0xe0000000 @ virtual - orreq \rx, \rx, #0x00200000 @ physical - orr \rx, \rx, #0x00006000 @ UART1 offset - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h deleted file mode 100644 index 621ff2c..0000000 --- a/arch/arm/mach-imx/include/mach/dma.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} imx_dma_prio; - -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20+(x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S deleted file mode 100644 index e4db679..0000000 --- a/arch/arm/mach-imx/include/mach/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for iMX-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#define AITC_NIVECSR 0x40 - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(IMX_AITC_BASE) - @ Load offset & priority of the highest priority - @ interrupt pending. - ldr \irqstat, [\base, #AITC_NIVECSR] - @ Shift off the priority leaving the offset or - @ "interrupt number", use arithmetic shift to - @ transform illegal source (0xffff) as -1 - mov \irqnr, \irqstat, asr #16 - adds \tmp, \irqnr, #1 - .endm diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h deleted file mode 100644 index 6c2942f..0000000 --- a/arch/arm/mach-imx/include/mach/gpio.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef _IMX_GPIO_H - -#include -#include -#include - -#define IMX_GPIO_ALLOC_MODE_NORMAL 0 -#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1 -#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2 -#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4 -#define IMX_GPIO_ALLOC_MODE_RELEASE 8 - -extern int imx_gpio_request(unsigned gpio, const char *label); - -extern void imx_gpio_free(unsigned gpio); - -extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label); - -extern int imx_gpio_direction_input(unsigned gpio); - -extern int imx_gpio_direction_output(unsigned gpio, int value); - -extern void __imx_gpio_set_value(unsigned gpio, int value); - -static inline int imx_gpio_get_value(unsigned gpio) -{ - return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK)); -} - -static inline void imx_gpio_set_value_inline(unsigned gpio, int value) -{ - unsigned long flags; - - raw_local_irq_save(flags); - if(value) - DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK)); - else - DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK)); - raw_local_irq_restore(flags); -} - -static inline void imx_gpio_set_value(unsigned gpio, int value) -{ - if(__builtin_constant_p(gpio)) - imx_gpio_set_value_inline(gpio, value); - else - __imx_gpio_set_value(gpio, value); -} - -extern int imx_gpio_to_irq(unsigned gpio); - -extern int imx_irq_to_gpio(unsigned irq); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions - * to allow future extension of GPIO logic. - */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return imx_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - might_sleep(); - - imx_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return imx_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return imx_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return imx_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); -} - -#include /* cansleep wrappers */ - -static inline int gpio_to_irq(unsigned gpio) -{ - return imx_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return imx_irq_to_gpio(irq); -} - - -#endif diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h deleted file mode 100644 index c73e9e7..0000000 --- a/arch/arm/mach-imx/include/mach/hardware.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/hardware.h - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include "imx-regs.h" - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) - -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -#endif - -/* - * Memory map - */ - -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE 0xe0000000 - -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 -#define IMX_CS0_VIRT 0xe8000000 - -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 -#define IMX_CS1_VIRT 0xea000000 - -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 -#define IMX_CS2_VIRT 0xeb000000 - -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 -#define IMX_CS3_VIRT 0xec000000 - -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 -#define IMX_CS4_VIRT 0xed000000 - -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 -#define IMX_CS5_VIRT 0xee000000 - -#define IMX_FB_VIRT 0xF1000000 -#define IMX_FB_SIZE (256*1024) - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) - -#ifndef __ASSEMBLY__ -/* - * Handy routine to set GPIO functions - */ -extern void imx_gpio_mode( int gpio_mode ); - -#endif - -#define MAXIRQNUM 62 -#define MAXFIQNUM 62 -#define MAXSWINUM 62 - -/* - * Use SDRAM for memory - */ -#define MEM_SIZE 0x01000000 - -#ifdef CONFIG_ARCH_MX1ADS -#include "mx1ads.h" -#endif - -#endif diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h deleted file mode 100644 index bbe54df..0000000 --- a/arch/arm/mach-imx/include/mach/imx-dma.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -#ifndef __ASM_ARCH_IMX_DMA_H -#define __ASM_ARCH_IMX_DMA_H - -#define IMX_DMA_CHANNELS 11 - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @sgbc: counter of processed bytes in the actual read/written chunk - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void *data; - unsigned int dma_mode; - struct scatterlist *sg; - unsigned int sgbc; - unsigned int sgcount; - unsigned int resbytes; - int dma_num; -}; - -extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -#define IMX_DMA_ERR_BURST 1 -#define IMX_DMA_ERR_REQUEST 2 -#define IMX_DMA_ERR_TRANSFER 4 -#define IMX_DMA_ERR_BUFFER 8 - -/* The type to distinguish channel numbers parameter from ordinal int type */ -typedef int imx_dmach_t; - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_MASK 1 - -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -void imx_dma_enable(imx_dmach_t dma_ch); - -void imx_dma_disable(imx_dmach_t dma_ch); - -int imx_dma_request(imx_dmach_t dma_ch, const char *name); - -void imx_dma_free(imx_dmach_t dma_ch); - -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio); - - -#endif /* _ASM_ARCH_IMX_DMA_H */ diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h deleted file mode 100644 index 490297f..0000000 --- a/arch/arm/mach-imx/include/mach/imx-regs.h +++ /dev/null @@ -1,376 +0,0 @@ -#ifndef _IMX_REGS_H -#define _IMX_REGS_H -/* ------------------------------------------------------------------------ - * Motorola IMX system registers - * ------------------------------------------------------------------------ - * - */ - -/* - * Register BASEs, based on OFFSETs - * - */ -#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) -#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) -#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) -#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) -#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) -#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) -#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) -#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) -#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) -#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) -#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) -#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) -#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) -#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) -#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) -#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE) -#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) -#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) -#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) -#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) -#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) -#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) -#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) -#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) -#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) -#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) - -/* PLL registers */ -#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SPLL_RESTART (1<<22) -#define CSCR_MPLL_RESTART (1<<21) -#define CSCR_SYSTEM_SEL (1<<16) -#define CSCR_BCLK_DIV (0xf<<10) -#define CSCR_MPU_PRESC (1<<15) -#define CSCR_SPEN (1<<1) -#define CSCR_MPEN (1<<0) - -#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ -#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ -#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ -#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ -#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) -#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) -#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) -#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) -#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) -#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) -#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) -#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) -#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) -#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) -#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) -#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) -#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) -#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) -#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) -#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) -#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) - -#define GPIO_PORT_MAX 3 - -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_MASK (0x3 << 5) - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORTA (0<<5) -#define GPIO_PORTB (1<<5) -#define GPIO_PORTC (2<<5) -#define GPIO_PORTD (3<<5) - -#define GPIO_OUT (1<<7) -#define GPIO_IN (0<<7) -#define GPIO_PUEN (1<<8) - -#define GPIO_PF (0<<9) -#define GPIO_AF (1<<9) - -#define GPIO_OCR_SHIFT 10 -#define GPIO_OCR_MASK (3<<10) -#define GPIO_AIN (0<<10) -#define GPIO_BIN (1<<10) -#define GPIO_CIN (2<<10) -#define GPIO_DR (3<<10) - -#define GPIO_AOUT_SHIFT 12 -#define GPIO_AOUT_MASK (3<<12) -#define GPIO_AOUT (0<<12) -#define GPIO_AOUT_ISR (1<<12) -#define GPIO_AOUT_0 (2<<12) -#define GPIO_AOUT_1 (3<<12) - -#define GPIO_BOUT_SHIFT 14 -#define GPIO_BOUT_MASK (3<<14) -#define GPIO_BOUT (0<<14) -#define GPIO_BOUT_ISR (1<<14) -#define GPIO_BOUT_0 (2<<14) -#define GPIO_BOUT_1 (3<<14) - -#define GPIO_GIUS (1<<16) - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) -#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) -#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) -#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) -#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) -#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) -#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) -#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) -#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) -#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) -#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) -#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) -#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) -#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) -#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) -#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) -#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) -#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) -#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) -#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) -#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) -#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) -#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) -#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) -#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) -#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) -#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) -#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) -#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) -#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) -#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) -#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) -#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) -#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) -#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) -#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) -#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) -#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) -#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) -#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) -#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) -#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) -#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) -#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) -#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) -#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) -#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) -#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) -#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) -#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) -#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) -#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) -#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) -#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) -#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) -#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) -#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) -#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) -#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) -#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) -#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) -#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) -#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) -#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) -#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) -#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) -#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) -#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) -#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) -#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) -#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) -#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) -#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) -#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) -#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) -#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) -#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) -#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) -#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) -#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) -#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) -#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) -#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) -#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) -#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) -#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) -#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) -#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) -#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) -#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) -#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) -#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) -#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) -#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) -#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) -#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) -#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) -#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) -#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) -#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) -#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) -#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) -#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) -#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) -#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) -#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) -#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) -#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) -#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) -#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) -#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) -#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) -#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) -#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) -#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) -#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) -#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) -#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) -#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) -#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) -#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) -#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) - -/* - * PWM controller - */ -#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */ -#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */ -#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */ -#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */ - -#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */ -#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */ -#define PWMC_SWR (0x01<<16) /* Software Reset */ -#define PWMC_CLKSRC (0x01<<15) /* Clock Source */ -#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */ -#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */ -#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */ -#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */ -#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */ -#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */ - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ - -/* - * DMA Controller - */ -#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ -#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ -#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ -#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ -#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ -#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ -#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ -#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ -#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ -#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ -#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ -#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ -#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ -#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ -#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ -#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ -#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ -#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ -#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ -#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ -#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ -#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff ) -#define CNTR_CNT(x) ((x) & 0xffffff ) -#define CCR_DMOD_LINEAR ( 0x0 << 12 ) -#define CCR_DMOD_2D ( 0x1 << 12 ) -#define CCR_DMOD_FIFO ( 0x2 << 12 ) -#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) -#define CCR_SMOD_LINEAR ( 0x0 << 10 ) -#define CCR_SMOD_2D ( 0x1 << 10 ) -#define CCR_SMOD_FIFO ( 0x2 << 10 ) -#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 ( 0x0 << 6 ) -#define CCR_DSIZ_8 ( 0x1 << 6 ) -#define CCR_DSIZ_16 ( 0x2 << 6 ) -#define CCR_SSIZ_32 ( 0x0 << 4 ) -#define CCR_SSIZ_8 ( 0x1 << 4 ) -#define CCR_SSIZ_16 ( 0x2 << 4 ) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * Interrupt controller - */ - -#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00) -#define INTCNTL_FIAD (1<<19) -#define INTCNTL_NIAD (1<<20) - -#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04) -#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08) -#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c) -#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10) -#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14) - -/* - * General purpose timers - */ -#define IMX_TCTL(x) __REG( 0x00 + (x)) -#define TCTL_SWR (1<<15) -#define TCTL_FRR (1<<8) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_OM (1<<5) -#define TCTL_IRQEN (1<<4) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_16 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) -#define TCTL_TEN (1<<0) - -#define IMX_TPRER(x) __REG( 0x04 + (x)) -#define IMX_TCMP(x) __REG( 0x08 + (x)) -#define IMX_TCR(x) __REG( 0x0C + (x)) -#define IMX_TCN(x) __REG( 0x10 + (x)) -#define IMX_TSTAT(x) __REG( 0x14 + (x)) -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -#endif // _IMX_REGS_H diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h deleted file mode 100644 index d54eb1d..0000000 --- a/arch/arm/mach-imx/include/mach/imx-uart.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - void (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -#endif diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h deleted file mode 100644 index 9e197ae..0000000 --- a/arch/arm/mach-imx/include/mach/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h deleted file mode 100644 index 67812c5..0000000 --- a/arch/arm/mach-imx/include/mach/irqs.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ARM_IRQS_H__ -#define __ARM_IRQS_H__ - -/* Use the imx definitions */ -#include - -/* - * IMX Interrupt numbers - * - */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 - -#define IMX_IRQS (64) - -/* note: the IMX has four gpio ports (A-D), but only - * the following pins are connected to the outside - * world: - * - * PORT A: bits 0-31 - * PORT B: bits 8-31 - * PORT C: bits 3-17 - * PORT D: bits 6-31 - * - * We map these interrupts straight on. As a result we have - * several holes in the interrupt mapping. We do this for two - * reasons: - * - mapping the interrupts without holes would get - * far more complicated - * - Motorola could well decide to bring some processor - * with more pins connected - */ - -#define IRQ_GPIOA(x) (IMX_IRQS + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5) - -/* all normal IRQs can be FIQs */ -#define FIQ_START 0 -/* switch betwean IRQ and FIQ */ -extern int imx_set_irq_fiq(unsigned int irq, unsigned int type); - -#define NR_IRQS (IRQ_GPIOD(32) + 1) -#define IRQ_GPIO(x) -#endif diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h deleted file mode 100644 index a93df7c..0000000 --- a/arch/arm/mach-imx/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/memory.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H - -#define PHYS_OFFSET UL(0x08000000) - -#endif diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h deleted file mode 100644 index 4712f35..0000000 --- a/arch/arm/mach-imx/include/mach/mmc.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include - -struct device; - -struct imxmmc_platform_data { - int (*card_present)(struct device *); - int (*get_ro)(struct device *); -}; - -extern void imx_set_mmc_info(struct imxmmc_platform_data *info); - -#endif diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h deleted file mode 100644 index def05d5..0000000 --- a/arch/arm/mach-imx/include/mach/mx1ads.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/mx1ads.h - * - * Copyright (C) 2004 Robert Schwebel, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_MX1ADS_H -#define __ASM_ARCH_MX1ADS_H - -/* ------------------------------------------------------------------------ */ -/* Memory Map for the M9328MX1ADS (MX1ADS) Board */ -/* ------------------------------------------------------------------------ */ - -#define MX1ADS_FLASH_PHYS 0x10000000 -#define MX1ADS_FLASH_SIZE (16*1024*1024) - -#define IMX_FB_PHYS (0x0C000000 - 0x40000) - -#define CLK32 32000 - -#endif /* __ASM_ARCH_MX1ADS_H */ diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h deleted file mode 100644 index 4186430..0000000 --- a/arch/arm/mach-imx/include/mach/spi_imx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/spi_imx.h - * - * Copyright (C) 2006 SWAPP - * Andrea Paterniani - * - * Initial version inspired by: - * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef SPI_IMX_H_ -#define SPI_IMX_H_ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects - 1. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. - * @enable_dma: if true enables DMA driven transfers. -*/ -struct spi_imx_master { - u8 num_chipselect; - u8 enable_dma:1; -}; -/*-------------------------------------------------------------------------*/ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_chip - spi_board_info.controller_data for SPI - * slave devices, copied to spi_device.controller_data. - * @enable_loopback : used for test purpouse to internally connect RX and TX - * sections. - * @enable_dma : enables dma transfer (provided that controller driver has - * dma enabled too). - * @ins_ss_pulse : enable /SS pulse insertion between SPI burst. - * @bclk_wait : number of bclk waits between each bits_per_word SPI burst. - * @cs_control : function pointer to board-specific function to assert/deassert - * I/O port to control HW generation of devices chip-select. -*/ -struct spi_imx_chip { - u8 enable_loopback:1; - u8 enable_dma:1; - u8 ins_ss_pulse:1; - u16 bclk_wait:15; - void (*cs_control)(u32 control); -}; - -/* Chip-select state */ -#define SPI_CS_ASSERT (1 << 0) -#define SPI_CS_DEASSERT (1 << 1) -/*-------------------------------------------------------------------------*/ - - -#endif /* SPI_IMX_H_*/ diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h deleted file mode 100644 index 46d4ca9..0000000 --- a/arch/arm/mach-imx/include/mach/system.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void -arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void -arch_reset(char mode, const char *cmd) -{ - cpu_reset(0); -} - -#endif diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-imx/include/mach/timex.h deleted file mode 100644 index e22ba78..0000000 --- a/arch/arm/mach-imx/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/imx/timex.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE (16000000) - -#endif diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h deleted file mode 100644 index 70523e6..0000000 --- a/arch/arm/mach-imx/include/mach/uncompress.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define UART1_BASE 0x206000 -#define UART2_BASE 0x207000 -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ - unsigned long serial_port; - - do { - serial_port = UART1_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - serial_port = UART2_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - return; - } while(0); - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h deleted file mode 100644 index 7d7cb0b..0000000 --- a/arch/arm/mach-imx/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c deleted file mode 100644 index 531b95d..0000000 --- a/arch/arm/mach-imx/irq.c +++ /dev/null @@ -1,311 +0,0 @@ -/* - * linux/arch/arm/mach-imx/irq.c - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * 03/03/2004 Sascha Hauer - * Copied from the motorola bsp package and added gpio demux - * interrupt handler - */ - -#include -#include -#include -#include - -#include -#include - -#include - -/* - * - * We simply use the ENABLE DISABLE registers inside of the IMX - * to turn on/off specific interrupts. - * - */ - -#define INTCNTL_OFF 0x00 -#define NIMASK_OFF 0x04 -#define INTENNUM_OFF 0x08 -#define INTDISNUM_OFF 0x0C -#define INTENABLEH_OFF 0x10 -#define INTENABLEL_OFF 0x14 -#define INTTYPEH_OFF 0x18 -#define INTTYPEL_OFF 0x1C -#define NIPRIORITY_OFF(x) (0x20+4*(7-(x))) -#define NIVECSR_OFF 0x40 -#define FIVECSR_OFF 0x44 -#define INTSRCH_OFF 0x48 -#define INTSRCL_OFF 0x4C -#define INTFRCH_OFF 0x50 -#define INTFRCL_OFF 0x54 -#define NIPNDH_OFF 0x58 -#define NIPNDL_OFF 0x5C -#define FIPNDH_OFF 0x60 -#define FIPNDL_OFF 0x64 - -#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE) -#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF) -#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF) -#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF) -#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF) -#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF) -#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF) -#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF) -#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF) -#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x)) -#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF) -#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF) -#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF) -#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF) -#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF) -#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF) -#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF) -#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF) -#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF) -#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF) - -#if 0 -#define DEBUG_IRQ(fmt...) printk(fmt) -#else -#define DEBUG_IRQ(fmt...) do { } while (0) -#endif - -static void -imx_mask_irq(unsigned int irq) -{ - __raw_writel(irq, IMX_AITC_INTDISNUM); -} - -static void -imx_unmask_irq(unsigned int irq) -{ - __raw_writel(irq, IMX_AITC_INTENNUM); -} - -#ifdef CONFIG_FIQ -int imx_set_irq_fiq(unsigned int irq, unsigned int type) -{ - unsigned int irqt; - - if (irq >= IMX_IRQS) - return -EINVAL; - - if (irq < IMX_IRQS / 2) { - irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL); - } else { - irq -= IMX_IRQS / 2; - irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH); - } - - return 0; -} -EXPORT_SYMBOL(imx_set_irq_fiq); -#endif /* CONFIG_FIQ */ - -static int -imx_gpio_irq_type(unsigned int _irq, unsigned int type) -{ - unsigned int irq_type = 0, irq, reg, bit; - - irq = _irq - IRQ_GPIOA(0); - reg = irq >> 5; - bit = 1 << (irq % 32); - - if (type == IRQ_TYPE_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - GPIOs set to alternate function during probe */ - /* TODO: support probe */ -// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) & -// GPIO_bit(gpio)) -// return 0; -// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) -// return 0; -// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - GIUS(reg) |= bit; - DDIR(reg) &= ~(bit); - - DEBUG_IRQ("setting type of irq %d to ", _irq); - - if (type & IRQ_TYPE_EDGE_RISING) { - DEBUG_IRQ("rising edges\n"); - irq_type = 0x0; - } - if (type & IRQ_TYPE_EDGE_FALLING) { - DEBUG_IRQ("falling edges\n"); - irq_type = 0x1; - } - if (type & IRQ_TYPE_LEVEL_LOW) { - DEBUG_IRQ("low level\n"); - irq_type = 0x3; - } - if (type & IRQ_TYPE_LEVEL_HIGH) { - DEBUG_IRQ("high level\n"); - irq_type = 0x2; - } - - if (irq % 32 < 16) { - ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) | - (irq_type << ((irq % 16) * 2)); - } else { - ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) | - (irq_type << ((irq % 16) * 2)); - } - - return 0; - -} - -static void -imx_gpio_ack_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32); -} - -static void -imx_gpio_mask_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32)); -} - -static void -imx_gpio_unmask_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32); -} - -static void -imx_gpio_handler(unsigned int mask, unsigned int irq, - struct irq_desc *desc) -{ - while (mask) { - if (mask & 1) { - DEBUG_IRQ("handling irq %d\n", irq); - generic_handle_irq(irq); - } - irq++; - mask >>= 1; - } -} - -static void -imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(0); - irq = IRQ_GPIOA(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(1); - irq = IRQ_GPIOB(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(2); - irq = IRQ_GPIOC(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(3); - irq = IRQ_GPIOD(0); - imx_gpio_handler(mask, irq, desc); -} - -static struct irq_chip imx_internal_chip = { - .name = "MPU", - .ack = imx_mask_irq, - .mask = imx_mask_irq, - .unmask = imx_unmask_irq, -}; - -static struct irq_chip imx_gpio_chip = { - .name = "GPIO", - .ack = imx_gpio_ack_irq, - .mask = imx_gpio_mask_irq, - .unmask = imx_gpio_unmask_irq, - .set_type = imx_gpio_irq_type, -}; - -void __init -imx_init_irq(void) -{ - unsigned int irq; - - DEBUG_IRQ("Initializing imx interrupts\n"); - - /* Disable all interrupts initially. */ - /* Do not rely on the bootloader. */ - __raw_writel(0, IMX_AITC_INTENABLEH); - __raw_writel(0, IMX_AITC_INTENABLEL); - - /* Mask all GPIO interrupts as well */ - IMR(0) = 0; - IMR(1) = 0; - IMR(2) = 0; - IMR(3) = 0; - - for (irq = 0; irq < IMX_IRQS; irq++) { - set_irq_chip(irq, &imx_internal_chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) { - set_irq_chip(irq, &imx_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler); - - /* Release masking of interrupts according to priority */ - __raw_writel(-1, IMX_AITC_NIMASK); - -#ifdef CONFIG_FIQ - /* Initialize FIQ */ - init_FIQ(); -#endif -} diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c deleted file mode 100644 index 1d48f27..0000000 --- a/arch/arm/mach-imx/leds-mx1ads.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/arch/arm/mach-imx/leds-mx1ads.c - * - * Copyright (c) 2004 Sascha Hauer - * - * Original (leds-footbridge.c) by Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include "leds.h" - -/* - * The MX1ADS Board has only one usable LED, - * so select only the timer led or the - * cpu usage led - */ -void -mx1ads_leds_event(led_event_t ledevt) -{ - unsigned long flags; - - local_irq_save(flags); - - switch (ledevt) { -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - DR(0) &= ~(1<<2); - break; - - case led_idle_end: - DR(0) |= 1<<2; - break; -#endif - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - DR(0) ^= 1<<2; -#endif - default: - break; - } - local_irq_restore(flags); -} diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c deleted file mode 100644 index cf30803..0000000 --- a/arch/arm/mach-imx/leds.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/arm/mach-imx/leds.c - * - * Copyright (C) 2004 Sascha Hauer - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include - -#include -#include - -#include "leds.h" - -static int __init -leds_init(void) -{ - if (machine_is_mx1ads()) { - leds_event = mx1ads_leds_event; - } - - return 0; -} - -__initcall(leds_init); diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h deleted file mode 100644 index 49dc1c1..0000000 --- a/arch/arm/mach-imx/leds.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-imx/leds.h - * - * Copyright (c) 2004 Sascha Hauer - * - * blinky lights for IMX-based systems - * - */ -extern void mx1ads_leds_event(led_event_t evt); diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c deleted file mode 100644 index 87fa1ff..0000000 --- a/arch/arm/mach-imx/mx1ads.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/arm/mach-imx/mx1ads.c - * - * Initially based on: - * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c - * Copyright (c) 2004 Sascha Hauer - * - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include "generic.h" - -static struct resource cs89x0_resources[] = { - [0] = { - .start = IMX_CS4_PHYS + 0x300, - .end = IMX_CS4_PHYS + 0x300 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIOC(17), - .end = IRQ_GPIOC(17), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cs89x0_device = { - .name = "cirrus-cs89x0", - .num_resources = ARRAY_SIZE(cs89x0_resources), - .resource = cs89x0_resources, -}; - -static struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct resource imx_uart1_resources[] = { - [0] = { - .start = 0x00206000, - .end = 0x002060FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART1_MINT_RX), - .end = (UART1_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART1_MINT_TX), - .end = (UART1_MINT_TX), - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = UART1_MINT_RTS, - .end = UART1_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart1_device = { - .name = "imx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(imx_uart1_resources), - .resource = imx_uart1_resources, - .dev = { - .platform_data = &uart_pdata, - } -}; - -static struct resource imx_uart2_resources[] = { - [0] = { - .start = 0x00207000, - .end = 0x002070FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART2_MINT_RX), - .end = (UART2_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART2_MINT_TX), - .end = (UART2_MINT_TX), - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = UART2_MINT_RTS, - .end = UART2_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart2_device = { - .name = "imx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(imx_uart2_resources), - .resource = imx_uart2_resources, - .dev = { - .platform_data = &uart_pdata, - } -}; - -static struct platform_device *devices[] __initdata = { - &cs89x0_device, - &imx_uart1_device, - &imx_uart2_device, -}; - -#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) -static int mx1ads_mmc_card_present(struct device *dev) -{ - /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ - return (SSR(1) & (1 << 20) ? 0 : 1); -} - -static struct imxmmc_platform_data mx1ads_mmc_info = { - .card_present = mx1ads_mmc_card_present, -}; -#endif - -static void __init -mx1ads_init(void) -{ -#ifdef CONFIG_LEDS - imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); -#endif -#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) - /* SD/MMC card detect */ - imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); - imx_set_mmc_info(&mx1ads_mmc_info); -#endif - - imx_gpio_mode(PC9_PF_UART1_CTS); - imx_gpio_mode(PC10_PF_UART1_RTS); - imx_gpio_mode(PC11_PF_UART1_TXD); - imx_gpio_mode(PC12_PF_UART1_RXD); - - imx_gpio_mode(PB28_PF_UART2_CTS); - imx_gpio_mode(PB29_PF_UART2_RTS); - imx_gpio_mode(PB30_PF_UART2_TXD); - imx_gpio_mode(PB31_PF_UART2_RXD); - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init -mx1ads_map_io(void) -{ - imx_map_io(); -} - -MACHINE_START(MX1ADS, "Motorola MX1ADS") - /* Maintainer: Sascha Hauer, Pengutronix */ - .phys_io = 0x00200000, - .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, - .boot_params = 0x08000100, - .map_io = mx1ads_map_io, - .init_irq = imx_init_irq, - .timer = &imx_timer, - .init_machine = mx1ads_init, -MACHINE_END diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c deleted file mode 100644 index 5aef18b..0000000 --- a/arch/arm/mach-imx/time.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * linux/arch/arm/mach-imx/time.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Use timer 1 as system timer */ -#define TIMER_BASE IMX_TIM1_BASE - -static struct clock_event_device clockevent_imx; -static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -/* - * IRQ handler for the timer - */ -static irqreturn_t -imx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_imx; - uint32_t tstat; - irqreturn_t ret = IRQ_NONE; - - /* clear the interrupt */ - tstat = IMX_TSTAT(TIMER_BASE); - IMX_TSTAT(TIMER_BASE) = 0; - - if (tstat & TSTAT_COMP) { - evt->event_handler(evt); - ret = IRQ_HANDLED; - } - - return ret; -} - -static struct irqaction imx_timer_irq = { - .name = "i.MX Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = imx_timer_interrupt, -}; - -/* - * Set up timer hardware into expected mode and state. - */ -static void __init imx_timer_hardware_init(void) -{ - /* - * Initialise to a known state (all timers off, and timing reset) - */ - IMX_TCTL(TIMER_BASE) = 0; - IMX_TPRER(TIMER_BASE) = 0; - - IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN; -} - -cycle_t imx_get_cycles(struct clocksource *cs) -{ - return IMX_TCN(TIMER_BASE); -} - -static struct clocksource clocksource_imx = { - .name = "imx_timer1", - .rating = 200, - .read = imx_get_cycles, - .mask = 0xFFFFFFFF, - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init imx_clocksource_init(unsigned long rate) -{ - clocksource_imx.mult = - clocksource_hz2mult(rate, clocksource_imx.shift); - clocksource_register(&clocksource_imx); - - return 0; -} - -static int imx_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long tcmp; - - tcmp = IMX_TCN(TIMER_BASE) + evt; - IMX_TCMP(TIMER_BASE) = tcmp; - - return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0; -} - -#ifdef DEBUG -static const char *clock_event_mode_label[]={ - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" -}; -#endif /*DEBUG*/ - -static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) -{ - unsigned long flags; - - /* - * The timer interrupt generation is disabled at least - * for enough time to call imx_set_next_event() - */ - local_irq_save(flags); - /* Disable interrupt in GPT module */ - IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN; - if (mode != clockevent_mode) { - /* Set event time into far-far future */ - IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3; - /* Clear pending interrupt */ - IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP; - } - -#ifdef DEBUG - printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n", - clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]); -#endif /*DEBUG*/ - - /* Remember timer mode */ - clockevent_mode = mode; - local_irq_restore(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n"); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* - * Do not put overhead of interrupt enable/disable into - * imx_set_next_event(), the core has about 4 minutes - * to call imx_set_next_event() or shutdown clock after - * mode switching - */ - local_irq_save(flags); - IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN; - local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appears */ - break; - } -} - -static struct clock_event_device clockevent_imx = { - .name = "imx_timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_mode = imx_set_mode, - .set_next_event = imx_set_next_event, - .rating = 200, -}; - -static int __init imx_clockevent_init(unsigned long rate) -{ - clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC, - clockevent_imx.shift); - clockevent_imx.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_imx); - clockevent_imx.min_delta_ns = - clockevent_delta2ns(0xf, &clockevent_imx); - - clockevent_imx.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_imx); - - return 0; -} - -extern int imx_clocks_init(void); - -static void __init imx_timer_init(void) -{ - struct clk *clk; - unsigned long rate; - - imx_clocks_init(); - - clk = clk_get(NULL, "perclk1"); - clk_enable(clk); - rate = clk_get_rate(clk); - - imx_timer_hardware_init(); - imx_clocksource_init(rate); - - imx_clockevent_init(rate); - - /* - * Make irqs happen for the system timer - */ - setup_irq(TIM1_INT, &imx_timer_irq); -} - -struct sys_timer imx_timer = { - .init = imx_timer_init, -}; diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 2c5a02b..264f4d5 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -78,6 +78,12 @@ config MACH_IXDP465 IXDP465 Development Platform (Also known as BMP). For more information on this platform, see . +config MACH_GORAMO_MLR + bool "GORAMO Multi Link Router" + help + Say 'Y' here if you want your kernel to support GORAMO + MultiLink router. + config MACH_KIXRP435 bool "KIXRP435" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 2e6bbf9..47d1f60 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o +obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c new file mode 100644 index 0000000..a733b8f --- /dev/null +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -0,0 +1,507 @@ +/* + * Goramo MultiLink router platform code + * Copyright (C) 2006-2009 Krzysztof Halasa + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define xgpio_irq(n) (IRQ_IXP4XX_GPIO ## n) +#define gpio_irq(n) xgpio_irq(n) + +#define SLOT_ETHA 0x0B /* IDSEL = AD21 */ +#define SLOT_ETHB 0x0C /* IDSEL = AD20 */ +#define SLOT_MPCI 0x0D /* IDSEL = AD19 */ +#define SLOT_NEC 0x0E /* IDSEL = AD18 */ + +#define IRQ_ETHA IRQ_IXP4XX_GPIO4 +#define IRQ_ETHB IRQ_IXP4XX_GPIO5 +#define IRQ_NEC IRQ_IXP4XX_GPIO3 +#define IRQ_MPCI IRQ_IXP4XX_GPIO12 + +/* GPIO lines */ +#define GPIO_SCL 0 +#define GPIO_SDA 1 +#define GPIO_STR 2 +#define GPIO_HSS0_DCD_N 6 +#define GPIO_HSS1_DCD_N 7 +#define GPIO_HSS0_CTS_N 10 +#define GPIO_HSS1_CTS_N 11 +#define GPIO_HSS1_RTS_N 13 +#define GPIO_HSS0_RTS_N 14 + +/* Control outputs from 74HC4094 */ +#define CONTROL_HSS0_CLK_INT 0 +#define CONTROL_HSS1_CLK_INT 1 +#define CONTROL_HSS0_DTR_N 2 +#define CONTROL_HSS1_DTR_N 3 +#define CONTROL_EXT 4 +#define CONTROL_AUTO_RESET 5 +#define CONTROL_PCI_RESET_N 6 +#define CONTROL_EEPROM_WC_N 7 + +/* offsets from start of flash ROM = 0x50000000 */ +#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */ +#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */ +#define CFG_REV 0x4C /* u32 */ +#define CFG_SDRAM_SIZE 0x50 /* u32 */ +#define CFG_SDRAM_CONF 0x54 /* u32 */ +#define CFG_SDRAM_MODE 0x58 /* u32 */ +#define CFG_SDRAM_REFRESH 0x5C /* u32 */ + +#define CFG_HW_BITS 0x60 /* u32 */ +#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */ +#define CFG_HW_HAS_PCI_SLOT 0x00000008 +#define CFG_HW_HAS_ETH0 0x00000010 +#define CFG_HW_HAS_ETH1 0x00000020 +#define CFG_HW_HAS_HSS0 0x00000040 +#define CFG_HW_HAS_HSS1 0x00000080 +#define CFG_HW_HAS_UART0 0x00000100 +#define CFG_HW_HAS_UART1 0x00000200 +#define CFG_HW_HAS_EEPROM 0x00000400 + +#define FLASH_CMD_READ_ARRAY 0xFF +#define FLASH_CMD_READ_ID 0x90 +#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */ + +static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */; +static u8 control_value; + +static void set_scl(u8 value) +{ + gpio_line_set(GPIO_SCL, !!value); + udelay(3); +} + +static void set_sda(u8 value) +{ + gpio_line_set(GPIO_SDA, !!value); + udelay(3); +} + +static void set_str(u8 value) +{ + gpio_line_set(GPIO_STR, !!value); + udelay(3); +} + +static inline void set_control(int line, int value) +{ + if (value) + control_value |= (1 << line); + else + control_value &= ~(1 << line); +} + + +static void output_control(void) +{ + int i; + + gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); + + for (i = 0; i < 8; i++) { + set_scl(0); + set_sda(control_value & (0x80 >> i)); /* MSB first */ + set_scl(1); /* active edge */ + } + + set_str(1); + set_str(0); + + set_scl(0); + set_sda(1); /* Be ready for START */ + set_scl(1); +} + + +static void (*set_carrier_cb_tab[2])(void *pdev, int carrier); + +static int hss_set_clock(int port, unsigned int clock_type) +{ + int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT; + + switch (clock_type) { + case CLOCK_DEFAULT: + case CLOCK_EXT: + set_control(ctrl_int, 0); + output_control(); + return CLOCK_EXT; + + case CLOCK_INT: + set_control(ctrl_int, 1); + output_control(); + return CLOCK_INT; + + default: + return -EINVAL; + } +} + +static irqreturn_t hss_dcd_irq(int irq, void *pdev) +{ + int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N)); + gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + set_carrier_cb_tab[port](pdev, !i); + return IRQ_HANDLED; +} + + +static int hss_open(int port, void *pdev, + void (*set_carrier_cb)(void *pdev, int carrier)) +{ + int i, irq; + + if (!port) + irq = gpio_irq(GPIO_HSS0_DCD_N); + else + irq = gpio_irq(GPIO_HSS1_DCD_N); + + gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + set_carrier_cb(pdev, !i); + + set_carrier_cb_tab[!!port] = set_carrier_cb; + + if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) { + printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n", + irq, i); + return i; + } + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0); + output_control(); + gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); + return 0; +} + +static void hss_close(int port, void *pdev) +{ + free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N), + pdev); + set_carrier_cb_tab[!!port] = NULL; /* catch bugs */ + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); + output_control(); + gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); +} + + +/* Flash memory */ +static struct flash_platform_data flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device device_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { .platform_data = &flash_data }, + .num_resources = 1, + .resource = &flash_resource, +}; + + +/* I^2C interface */ +static struct i2c_gpio_platform_data i2c_data = { + .sda_pin = GPIO_SDA, + .scl_pin = GPIO_SCL, +}; + +static struct platform_device device_i2c = { + .name = "i2c-gpio", + .id = 0, + .dev = { .platform_data = &i2c_data }, +}; + + +/* IXP425 2 UART ports */ +static struct resource uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device device_uarts = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = uart_data, + .num_resources = 2, + .resource = uart_resources, +}; + + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info eth_plat[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 32, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 33, + } +}; + +static struct platform_device device_eth_tab[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = eth_plat, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = eth_plat + 1, + } +}; + + +/* IXP425 2 synchronous serial ports */ +static struct hss_plat_info hss_plat[] = { + { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 34, + }, { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 35, + } +}; + +static struct platform_device device_hss_tab[] = { + { + .name = "ixp4xx_hss", + .id = 0, + .dev.platform_data = hss_plat, + }, { + .name = "ixp4xx_hss", + .id = 1, + .dev.platform_data = hss_plat + 1, + } +}; + + +static struct platform_device *device_tab[6] __initdata = { + &device_flash, /* index 0 */ +}; + +static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readb(flash + addr); +#else + return __raw_readb(flash + (addr ^ 3)); +#endif +} + +static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readw(flash + addr); +#else + return __raw_readw(flash + (addr ^ 2)); +#endif +} + +static void __init gmlr_init(void) +{ + u8 __iomem *flash; + int i, devices = 1; /* flash */ + + ixp4xx_sys_init(); + + if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL) + printk(KERN_ERR "goramo-mlr: unable to access system" + " configuration data\n"); + else { + system_rev = __raw_readl(flash + CFG_REV); + hw_bits = __raw_readl(flash + CFG_HW_BITS); + + for (i = 0; i < ETH_ALEN; i++) { + eth_plat[0].hwaddr[i] = + flash_readb(flash, CFG_ETH0_ADDRESS + i); + eth_plat[1].hwaddr[i] = + flash_readb(flash, CFG_ETH1_ADDRESS + i); + } + + __raw_writew(FLASH_CMD_READ_ID, flash); + system_serial_high = flash_readw(flash, FLASH_SER_OFF); + system_serial_high <<= 16; + system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2); + system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4); + system_serial_low <<= 16; + system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6); + __raw_writew(FLASH_CMD_READ_ARRAY, flash); + + iounmap(flash); + } + + switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) { + case CFG_HW_HAS_UART0: + memset(&uart_data[1], 0, sizeof(uart_data[1])); + device_uarts.num_resources = 1; + break; + + case CFG_HW_HAS_UART1: + device_uarts.dev.platform_data = &uart_data[1]; + device_uarts.resource = &uart_resources[1]; + device_uarts.num_resources = 1; + break; + } + if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) + device_tab[devices++] = &device_uarts; /* max index 1 */ + + if (hw_bits & CFG_HW_HAS_ETH0) + device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */ + if (hw_bits & CFG_HW_HAS_ETH1) + device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */ + + if (hw_bits & CFG_HW_HAS_HSS0) + device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */ + if (hw_bits & CFG_HW_HAS_HSS1) + device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */ + + if (hw_bits & CFG_HW_HAS_EEPROM) + device_tab[devices++] = &device_i2c; /* max index 6 */ + + gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN); + gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN); + set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); + set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); + + set_control(CONTROL_HSS0_DTR_N, 1); + set_control(CONTROL_HSS1_DTR_N, 1); + set_control(CONTROL_EEPROM_WC_N, 1); + set_control(CONTROL_PCI_RESET_N, 1); + output_control(); + + msleep(1); /* Wait for PCI devices to initialize */ + + flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + platform_add_devices(device_tab, devices); +} + + +#ifdef CONFIG_PCI +static void __init gmlr_pci_preinit(void) +{ + set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static void __init gmlr_pci_postinit(void) +{ + if ((hw_bits & CFG_HW_USB_PORTS) >= 2 && + (hw_bits & CFG_HW_USB_PORTS) < 5) { + /* need to adjust number of USB ports on NEC chip */ + u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0; + if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { + value &= ~7; + value |= (hw_bits & CFG_HW_USB_PORTS); + ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value); + } + } +} + +static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + switch(slot) { + case SLOT_ETHA: return IRQ_ETHA; + case SLOT_ETHB: return IRQ_ETHB; + case SLOT_NEC: return IRQ_NEC; + default: return IRQ_MPCI; + } +} + +static struct hw_pci gmlr_hw_pci __initdata = { + .nr_controllers = 1, + .preinit = gmlr_pci_preinit, + .postinit = gmlr_pci_postinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = gmlr_map_irq, +}; + +static int __init gmlr_pci_init(void) +{ + if (machine_is_goramo_mlr() && + (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT))) + pci_common_init(&gmlr_hw_pci); + return 0; +} + +subsys_initcall(gmlr_pci_init); +#endif /* CONFIG_PCI */ + + +MACHINE_START(GORAMO_MLR, "MultiLink") + /* Maintainer: Krzysztof Halasa */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = gmlr_init, +MACHINE_END diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h index def7773..b2ef65d 100644 --- a/arch/arm/mach-ixp4xx/include/mach/cpu.h +++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h @@ -26,6 +26,8 @@ #define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */ #define IXP46X_PROCESSOR_ID_MASK 0xfffffff0 +#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \ + IXP42X_PROCESSOR_ID_VALUE) #define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \ IXP42X_PROCESSOR_ID_VALUE) #define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \ @@ -35,8 +37,11 @@ static inline u32 ixp4xx_read_feature_bits(void) { - unsigned int val = ~*IXP4XX_EXP_CFG2; + u32 val = ~*IXP4XX_EXP_CFG2; + if (cpu_is_ixp42x_rev_a0()) + return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP | + IXP4XX_FEATURE_AES); if (cpu_is_ixp42x()) return val & IXP42X_FEATURE_MASK; if (cpu_is_ixp43x()) diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 0cbe6ce..9e7cad2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -15,7 +15,7 @@ #define DEBUG_QMGR 0 #define HALF_QUEUES 32 -#define QUEUES 64 /* only 32 lower queues currently supported */ +#define QUEUES 64 #define MAX_QUEUE_LENGTH 4 /* in dwords */ #define QUEUE_STAT1_EMPTY 1 /* queue status bits */ @@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue) return val; } -static inline int qmgr_get_stat1(unsigned int queue) +static inline int __qmgr_get_stat1(unsigned int queue) { extern struct qmgr_regs __iomem *qmgr_regs; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } -static inline int qmgr_get_stat2(unsigned int queue) +static inline int __qmgr_get_stat2(unsigned int queue) { extern struct qmgr_regs __iomem *qmgr_regs; + BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; } +/** + * qmgr_stat_empty() - checks if a hardware queue is empty + * @queue: queue number + * + * Returns non-zero value if the queue is empty. + */ static inline int qmgr_stat_empty(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY); + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY; } -static inline int qmgr_stat_nearly_empty(unsigned int queue) +/** + * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark + * @queue: queue number + * + * Returns non-zero value if the queue is below low watermark. + */ +static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY); + extern struct qmgr_regs __iomem *qmgr_regs; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statne_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY; } -static inline int qmgr_stat_nearly_full(unsigned int queue) +/** + * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark + * @queue: queue number + * + * Returns non-zero value if the queue is above high watermark + */ +static inline int qmgr_stat_above_high_watermark(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL); + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL; } +/** + * qmgr_stat_full() - checks if a hardware queue is full + * @queue: queue number + * + * Returns non-zero value if the queue is full. + */ static inline int qmgr_stat_full(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL); + extern struct qmgr_regs __iomem *qmgr_regs; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statf_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL; } +/** + * qmgr_stat_underflow() - checks if a hardware queue experienced underflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced underflow. + */ static inline int qmgr_stat_underflow(unsigned int queue) { - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW); + return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW; } +/** + * qmgr_stat_overflow() - checks if a hardware queue experienced overflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced overflow. + */ static inline int qmgr_stat_overflow(unsigned int queue) { - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW); + return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW; } #endif diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 7bb8e77..47ac69c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe) /* reset the NPE */ ixp4xx_write_feature_bits(val & ~(IXP4XX_FEATURE_RESET_NPEA << npe->id)); - for (i = 0; i < MAX_RETRIES; i++) { - if (!(ixp4xx_read_feature_bits() & - (IXP4XX_FEATURE_RESET_NPEA << npe->id))) - break; /* reset completed */ - udelay(1); - } - if (i == MAX_RETRIES) - return -ETIMEDOUT; - /* deassert reset */ ixp4xx_write_feature_bits(val | (IXP4XX_FEATURE_RESET_NPEA << npe->id)); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index bfddc73..bfdbe4b 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ -static void (*irq_handlers[HALF_QUEUES])(void *pdev); -static void *irq_pdevs[HALF_QUEUES]; +static void (*irq_handlers[QUEUES])(void *pdev); +static void *irq_pdevs[QUEUES]; #if DEBUG_QMGR char qmgr_queue_descs[QUEUES][32]; @@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32]; void qmgr_set_irq(unsigned int queue, int src, void (*handler)(void *pdev), void *pdev) { - u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */ - int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ unsigned long flags; - src &= 7; spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg); + if (queue < HALF_QUEUES) { + u32 __iomem *reg; + int bit; + BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL); + reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */ + bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ + __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), + reg); + } else + /* IRQ source for queues 32-63 is fixed */ + BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY); + irq_handlers[queue] = handler; irq_pdevs[queue] = pdev; spin_unlock_irqrestore(&qmgr_lock, flags); } -static irqreturn_t qmgr_irq1(int irq, void *pdev) +static irqreturn_t qmgr_irq1_a0(int irq, void *pdev) { - int i; - u32 val = __raw_readl(&qmgr_regs->irqstat[0]); - __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */ - - for (i = 0; i < HALF_QUEUES; i++) - if (val & (1 << i)) + int i, ret = 0; + u32 en_bitmap, src, stat; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]); + + en_bitmap = qmgr_regs->irqen[0]; + while (en_bitmap) { + i = __fls(en_bitmap); /* number of the last "low" queue */ + en_bitmap &= ~BIT(i); + src = qmgr_regs->irqsrc[i >> 3]; + stat = qmgr_regs->stat1[i >> 3]; + if (src & 4) /* the IRQ condition is inverted */ + stat = ~stat; + if (stat & BIT(src & 3)) { irq_handlers[i](irq_pdevs[i]); + ret = IRQ_HANDLED; + } + } + return ret; +} + + +static irqreturn_t qmgr_irq2_a0(int irq, void *pdev) +{ + int i, ret = 0; + u32 req_bitmap; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]); + + req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h; + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last "high" queue */ + req_bitmap &= ~BIT(i); + irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]); + ret = IRQ_HANDLED; + } + return ret; +} - return val ? IRQ_HANDLED : 0; + +static irqreturn_t qmgr_irq(int irq, void *pdev) +{ + int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1); + u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]); + + if (!req_bitmap) + return 0; + __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */ + + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last queue */ + req_bitmap &= ~BIT(i); + i += half * HALF_QUEUES; + irq_handlers[i](irq_pdevs[i]); + } + return IRQ_HANDLED; } void qmgr_enable_irq(unsigned int queue) { unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue), - &qmgr_regs->irqen[0]); + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask, + &qmgr_regs->irqen[half]); spin_unlock_irqrestore(&qmgr_lock, flags); } void qmgr_disable_irq(unsigned int queue) { unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue), - &qmgr_regs->irqen[0]); - __raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */ + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask, + &qmgr_regs->irqen[half]); + __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */ spin_unlock_irqrestore(&qmgr_lock, flags); } @@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, u32 cfg, addr = 0, mask[4]; /* in 16-dwords */ int err; - if (queue >= HALF_QUEUES) - return -ERANGE; + BUG_ON(queue >= QUEUES); if ((nearly_empty_watermark | nearly_full_watermark) & ~7) return -EINVAL; @@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue) { u32 cfg, addr, mask[4]; - BUG_ON(queue >= HALF_QUEUES); /* not in valid range */ + BUG_ON(queue >= QUEUES); /* not in valid range */ spin_lock_irq(&qmgr_lock); cfg = __raw_readl(&qmgr_regs->sram[queue]); @@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue) static int qmgr_init(void) { int i, err; + irq_handler_t handler1, handler2; + mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE, "IXP4xx Queue Manager"); @@ -247,23 +309,42 @@ static int qmgr_init(void) __raw_writel(0, &qmgr_regs->irqen[i]); } + __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h); + __raw_writel(0, &qmgr_regs->statf_h); + for (i = 0; i < QUEUES; i++) __raw_writel(0, &qmgr_regs->sram[i]); - err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0, - "IXP4xx Queue Manager", NULL); + if (cpu_is_ixp42x_rev_a0()) { + handler1 = qmgr_irq1_a0; + handler2 = qmgr_irq2_a0; + } else + handler1 = handler2 = qmgr_irq; + + err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager", + NULL); if (err) { - printk(KERN_ERR "qmgr: failed to request IRQ%i\n", - IRQ_IXP4XX_QM1); + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM1, err); goto error_irq; } + err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager", + NULL); + if (err) { + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM2, err); + goto error_irq2; + } + used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */ spin_lock_init(&qmgr_lock); printk(KERN_INFO "IXP4xx Queue Manager initialized.\n"); return 0; +error_irq2: + free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: iounmap(qmgr_regs); error_map: @@ -274,7 +355,9 @@ error_map: static void qmgr_remove(void) { free_irq(IRQ_IXP4XX_QM1, NULL); + free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); + synchronize_irq(IRQ_IXP4XX_QM2); iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index b5421cc..25100f7 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -20,6 +20,12 @@ config MACH_RD88F6281 Say 'Y' here if you want your kernel to support the Marvell RD-88F6281 Reference Board. +config MACH_MV88F6281GTW_GE + bool "Marvell 88F6281 GTW GE Board" + help + Say 'Y' here if you want your kernel to support the + Marvell 88F6281 GTW GE Board. + config MACH_SHEEVAPLUG bool "Marvell SheevaPlug Reference Board" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 8f03c9b..9dd680e 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -3,5 +3,8 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o + +obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 5db4f0b..1da5d1c 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -20,6 +20,7 @@ */ #define TARGET_DDR 0 #define TARGET_DEV_BUS 1 +#define TARGET_SRAM 3 #define TARGET_PCIE 4 #define ATTR_DEV_SPI_ROM 0x1e #define ATTR_DEV_BOOT 0x1d @@ -30,6 +31,7 @@ #define ATTR_DEV_CS0 0x3e #define ATTR_PCIE_IO 0xe0 #define ATTR_PCIE_MEM 0xe8 +#define ATTR_SRAM 0x01 /* * Helpers to get DDR bank info @@ -48,7 +50,6 @@ struct mbus_dram_target_info kirkwood_mbus_dram_info; -static int __initdata win_alloc_count; static int __init cpu_win_can_remap(int win) { @@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void) setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, TARGET_DEV_BUS, ATTR_DEV_NAND, -1); - win_alloc_count = 3; + /* + * Setup window for SRAM. + */ + setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, + TARGET_SRAM, ATTR_SRAM, -1); /* * Setup MBUS dram target info. @@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void) } kirkwood_mbus_dram_info.num_cs = cs; } - -void __init kirkwood_setup_sram_win(u32 base, u32 size) -{ - setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1); -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index be1ca28..0f69198 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -29,6 +30,7 @@ #include #include #include +#include #include #include "common.h" @@ -54,6 +56,13 @@ void __init kirkwood_map_io(void) iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); } +/* + * Default clock control bits. Any bit _not_ set in this variable + * will be cleared from the hardware after platform devices have been + * registered. Some reserved bits must be set to 1. + */ +unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; + /***************************************************************************** * EHCI @@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = { void __init kirkwood_ehci_init(void) { + kirkwood_clk_ctrl |= CGC_USB0; platform_device_register(&kirkwood_ehci); } @@ -151,6 +161,7 @@ static struct platform_device kirkwood_ge00 = { void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE0; eth_data->shared = &kirkwood_ge00_shared; kirkwood_ge00.dev.platform_data = eth_data; @@ -212,6 +223,7 @@ static struct platform_device kirkwood_ge01 = { void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE1; eth_data->shared = &kirkwood_ge01_shared; kirkwood_ge01.dev.platform_data = eth_data; @@ -258,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) /***************************************************************************** + * NAND flash + ****************************************************************************/ +static struct resource kirkwood_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KIRKWOOD_NAND_MEM_PHYS_BASE, + .end = KIRKWOOD_NAND_MEM_PHYS_BASE + + KIRKWOOD_NAND_MEM_SIZE - 1, +}; + +static struct orion_nand_data kirkwood_nand_data = { + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device kirkwood_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &kirkwood_nand_data, + }, + .resource = &kirkwood_nand_resource, + .num_resources = 1, +}; + +void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, + int chip_delay) +{ + kirkwood_clk_ctrl |= CGC_RUNIT; + kirkwood_nand_data.parts = parts; + kirkwood_nand_data.nr_parts = nr_parts; + kirkwood_nand_data.chip_delay = chip_delay; + platform_device_register(&kirkwood_nand_flash); +} + + +/***************************************************************************** * SoC RTC ****************************************************************************/ static struct resource kirkwood_rtc_resource = { @@ -301,6 +350,9 @@ static struct platform_device kirkwood_sata = { void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) { + kirkwood_clk_ctrl |= CGC_SATA0; + if (sata_data->n_ports > 1) + kirkwood_clk_ctrl |= CGC_SATA1; sata_data->dram = &kirkwood_mbus_dram_info; kirkwood_sata.dev.platform_data = sata_data; platform_device_register(&kirkwood_sata); @@ -346,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) else mvsdio_data->clock = 200000000; mvsdio_data->dram = &kirkwood_mbus_dram_info; + kirkwood_clk_ctrl |= CGC_SDIO; kirkwood_sdio.dev.platform_data = mvsdio_data; platform_device_register(&kirkwood_sdio); } @@ -377,6 +430,7 @@ static struct platform_device kirkwood_spi = { void __init kirkwood_spi_init() { + kirkwood_clk_ctrl |= CGC_RUNIT; platform_device_register(&kirkwood_spi); } @@ -507,6 +561,43 @@ void __init kirkwood_uart1_init(void) /***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ + +static struct resource kirkwood_crypto_res[] = { + { + .name = "regs", + .start = CRYPTO_PHYS_BASE, + .end = CRYPTO_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .name = "sram", + .start = KIRKWOOD_SRAM_PHYS_BASE, + .end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "crypto interrupt", + .start = IRQ_KIRKWOOD_CRYPTO, + .end = IRQ_KIRKWOOD_CRYPTO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_crypto_device = { + .name = "mv_crypto", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_crypto_res), + .resource = kirkwood_crypto_res, +}; + +void __init kirkwood_crypto_init(void) +{ + kirkwood_clk_ctrl |= CGC_CRYPTO; + platform_device_register(&kirkwood_crypto_device); +} + + +/***************************************************************************** * XOR ****************************************************************************/ static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = { @@ -597,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = { static void __init kirkwood_xor0_init(void) { + kirkwood_clk_ctrl |= CGC_XOR0; platform_device_register(&kirkwood_xor0_shared); /* @@ -695,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = { static void __init kirkwood_xor1_init(void) { + kirkwood_clk_ctrl |= CGC_XOR1; platform_device_register(&kirkwood_xor1_shared); /* @@ -713,6 +806,29 @@ static void __init kirkwood_xor1_init(void) /***************************************************************************** + * Watchdog + ****************************************************************************/ +static struct orion_wdt_platform_data kirkwood_wdt_data = { + .tclk = 0, +}; + +static struct platform_device kirkwood_wdt_device = { + .name = "orion_wdt", + .id = -1, + .dev = { + .platform_data = &kirkwood_wdt_data, + }, + .num_resources = 0, +}; + +static void __init kirkwood_wdt_init(void) +{ + kirkwood_wdt_data.tclk = kirkwood_tclk; + platform_device_register(&kirkwood_wdt_device); +} + + +/***************************************************************************** * Time handling ****************************************************************************/ int kirkwood_tclk; @@ -804,6 +920,49 @@ void __init kirkwood_init(void) /* internal devices that every board has */ kirkwood_rtc_init(); + kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); + kirkwood_crypto_init(); +} + +static int __init kirkwood_clock_gate(void) +{ + unsigned int curr = readl(CLOCK_GATING_CTRL); + + printk(KERN_DEBUG "Gating clock of unused units\n"); + printk(KERN_DEBUG "before: 0x%08x\n", curr); + + /* Make sure those units are accessible */ + writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL); + + /* For SATA: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_SATA0)) { + /* Disable PLL and IVREF */ + writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); + } + if (!(kirkwood_clk_ctrl & CGC_SATA1)) { + /* Disable PLL and IVREF */ + writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); + } + + /* For PCIe: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_PEX0)) { + writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); + while (1) + if (readl(PCIE_STATUS) & 0x1) + break; + writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); + } + + /* Now gate clock the required units */ + writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL); + printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL)); + + return 0; } +late_initcall(kirkwood_clock_gate); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 6ee8840..d7de434 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -15,6 +15,7 @@ struct dsa_platform_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; struct mvsdio_platform_data; +struct mtd_partition; /* * Basic Kirkwood init functions used early by machine-setup. @@ -25,7 +26,6 @@ void kirkwood_init_irq(void); extern struct mbus_dram_target_info kirkwood_mbus_dram_info; void kirkwood_setup_cpu_mbus(void); -void kirkwood_setup_sram_win(u32 base, u32 size); void kirkwood_pcie_id(u32 *dev, u32 *rev); @@ -40,9 +40,11 @@ void kirkwood_spi_init(void); void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); +void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #endif diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c new file mode 100644 index 0000000..f68d33f --- /dev/null +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-kirkwood/cpuidle.c + * + * CPU idle Marvell Kirkwood SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The cpu idle uses wait-for-interrupt and DDR self refresh in order + * to implement two idle states - + * #1 wait-for-interrupt + * #2 wait-for-interrupt and DDR self refresh + */ + +#include +#include +#include +#include +#include +#include +#include + +#define KIRKWOOD_MAX_STATES 2 + +static struct cpuidle_driver kirkwood_idle_driver = { + .name = "kirkwood_idle", + .owner = THIS_MODULE, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); + +/* Actual code that puts the SoC in different idle states */ +static int kirkwood_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + if (state == &dev->states[0]) + /* Wait for interrupt state */ + cpu_do_idle(); + else if (state == &dev->states[1]) { + /* + * Following write will put DDR in self refresh. + * Note that we have 256 cycles before DDR puts it + * self in self-refresh, so the wait-for-interrupt + * call afterwards won't get the DDR from self refresh + * mode. + */ + writel(0x7, DDR_OPERATION_BASE); + cpu_do_idle(); + } + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + return idle_time; +} + +/* Initialize CPU idle by registering the idle states */ +static int kirkwood_init_cpuidle(void) +{ + struct cpuidle_device *device; + + cpuidle_register_driver(&kirkwood_idle_driver); + + device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); + device->state_count = KIRKWOOD_MAX_STATES; + + /* Wait for interrupt state */ + device->states[0].enter = kirkwood_enter_idle; + device->states[0].exit_latency = 1; + device->states[0].target_residency = 10000; + device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[0].name, "WFI"); + strcpy(device->states[0].desc, "Wait for interrupt"); + + /* Wait for interrupt and DDR self refresh state */ + device->states[1].enter = kirkwood_enter_idle; + device->states[1].exit_latency = 10; + device->states[1].target_residency = 10000; + device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[1].name, "DDR SR"); + strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); + return -EIO; + } + return 0; +} + +device_initcall(kirkwood_init_cpuidle); diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index 5505d58..39bdf4b 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -11,14 +11,12 @@ #include #include #include -#include #include #include #include #include #include #include -#include #include #include "common.h" #include "mpp.h" @@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = { }, }; -static struct resource db88f6281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data db88f6281_nand_data = { - .parts = db88f6281_nand_parts, - .nr_parts = ARRAY_SIZE(db88f6281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device db88f6281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &db88f6281_nand_data, - }, - .resource = &db88f6281_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data db88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; @@ -92,13 +64,12 @@ static void __init db88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(db88f6281_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&db88f6281_ge00_data); kirkwood_sata_init(&db88f6281_sata_data); kirkwood_uart0_init(); kirkwood_sdio_init(&db88f6281_mvsdio_data); - - platform_device_register(&db88f6281_nand_flash); } static int __init db88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 4f7029f..9e80d92 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -17,12 +17,15 @@ #define CPU_RESET 0x00000002 #define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define WDT_RESET_OUT_EN 0x00000002 #define SOFT_RESET_OUT_EN 0x00000004 #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define WDT_INT_REQ 0x0008 + #define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) #define BRIDGE_INT_TIMER0 0x0002 #define BRIDGE_INT_TIMER1 0x0004 @@ -39,4 +42,22 @@ #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 +#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c) +#define CGC_GE0 (1 << 0) +#define CGC_PEX0 (1 << 2) +#define CGC_USB0 (1 << 3) +#define CGC_SDIO (1 << 4) +#define CGC_TSU (1 << 5) +#define CGC_DUNIT (1 << 6) +#define CGC_RUNIT (1 << 7) +#define CGC_XOR0 (1 << 8) +#define CGC_AUDIO (1 << 9) +#define CGC_SATA0 (1 << 14) +#define CGC_SATA1 (1 << 15) +#define CGC_XOR1 (1 << 16) +#define CGC_CRYPTO (1 << 17) +#define CGC_GE1 (1 << 19) +#define CGC_TDM (1 << 20) +#define CGC_RESERVED ((1 << 18) | (0x6 << 21)) + #endif diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index be07be0..a643a84 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr) + KIRKWOOD_PCIE_IO_VIRT_BASE); } +static inline void __iomem * +__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) +{ + void __iomem *retval; + unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE; + if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE && + size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) { + retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs; + } else { + retval = __arm_ioremap(paddr, size, mtype); + } + + return retval; +} + +static inline void +__arch_iounmap(void __iomem *addr) +{ + if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE || + addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE)) + __iounmap(addr); +} + +#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) +#define __arch_iounmap(a) __arch_iounmap(a) #define __io(a) __io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index b3e1395..07af858 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -20,16 +20,18 @@ * f1000000 on-chip peripheral registers * f2000000 PCIe I/O space * f3000000 NAND controller address window + * f4000000 Security Accelerator SRAM * * virt phys size * fee00000 f1000000 1M on-chip peripheral registers * fef00000 f2000000 1M PCIe I/O space */ +#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000 +#define KIRKWOOD_SRAM_SIZE SZ_2K + #define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K - * is the minimal window size - */ +#define KIRKWOOD_NAND_MEM_SIZE SZ_1K #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 #define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000 @@ -48,6 +50,7 @@ */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) #define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) +#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) @@ -63,7 +66,11 @@ #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -80,6 +87,11 @@ #define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) #define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330) #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 63c4493..a5900f6 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) if (!variant_mask) return; + /* Initialize gpiolib. */ + orion_gpio_init(); + printk(KERN_DEBUG "initial MPP regs:"); for (i = 0; i < MPP_NR_REGS; i++) { mpp_ctrl[i] = readl(MPP_CTRL(i)); diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c new file mode 100644 index 0000000..0358f45 --- /dev/null +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c + * + * Marvell 88F6281 GTW GE Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &mv88f6281gtw_ge_switch_chip_data, +}; + +static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = { + .type = "mx25l12805d", +}; + +static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &mv88f6281gtw_ge_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { + { + .code = KEY_RESTART, + .gpio = 47, + .desc = "SWR Button", + .active_low = 1, + }, { + .code = KEY_F1, + .gpio = 46, + .desc = "WPS Button(F1)", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = { + .buttons = mv88f6281gtw_ge_button_pins, + .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins), +}; + +static struct platform_device mv88f6281gtw_ge_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &mv88f6281gtw_ge_button_data, + }, +}; + +static struct gpio_led mv88f6281gtw_ge_led_pins[] = { + { + .name = "gtw:green:Status", + .gpio = 20, + .active_low = 0, + }, { + .name = "gtw:red:Status", + .gpio = 21, + .active_low = 0, + }, { + .name = "gtw:green:USB", + .gpio = 12, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = { + .leds = mv88f6281gtw_ge_led_pins, + .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins), +}; + +static struct platform_device mv88f6281gtw_ge_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mv88f6281gtw_ge_led_data, + }, +}; + +static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = { + MPP12_GPO, /* Status#_USB pin */ + MPP20_GPIO, /* Status#_GLED pin */ + MPP21_GPIO, /* Status#_RLED pin */ + MPP46_GPIO, /* WPS_Switch pin */ + MPP47_GPIO, /* SW_Init pin */ + 0 +}; + +static void __init mv88f6281gtw_ge_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); + kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); + spi_register_board_info(mv88f6281gtw_ge_spi_slave_info, + ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_uart0_init(); + platform_device_register(&mv88f6281gtw_ge_leds); + platform_device_register(&mv88f6281gtw_ge_buttons); +} + +static int __init mv88f6281gtw_ge_pci_init(void) +{ + if (machine_is_mv88f6281gtw_ge()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(mv88f6281gtw_ge_pci_init); + +MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") + /* Maintainer: Lennert Buytenhek */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = mv88f6281gtw_ge_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 73fccac..d90b9aa 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "common.h" @@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = { static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) { struct resource *res; + extern unsigned int kirkwood_clk_ctrl; /* * Generic PCIe unit setup. @@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) sys->resource[2] = NULL; sys->io_offset = 0; + kirkwood_clk_ctrl |= CGC_PEX0; + return 1; } diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 2f0e4ef..8bf4153 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -11,8 +11,6 @@ #include #include #include -#include -#include #include #include #include diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 31e996d..31708dd 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -22,7 +21,6 @@ #include #include #include -#include #include "common.h" #include "mpp.h" @@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = { }, }; -static struct resource rd88f6281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data rd88f6281_nand_data = { - .parts = rd88f6281_nand_parts, - .nr_parts = ARRAY_SIZE(rd88f6281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device rd88f6281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &rd88f6281_nand_data, - }, - .resource = &rd88f6281_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_NONE, .speed = SPEED_1000, @@ -114,6 +86,7 @@ static void __init rd88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(rd88f6281_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); @@ -129,8 +102,6 @@ static void __init rd88f6281_init(void) kirkwood_sata_init(&rd88f6281_sata_data); kirkwood_sdio_init(&rd88f6281_mvsdio_data); kirkwood_uart0_init(); - - platform_device_register(&rd88f6281_nand_flash); } static int __init rd88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 831e4a5..c7319ee 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -20,7 +19,6 @@ #include #include #include -#include #include "common.h" #include "mpp.h" @@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = { }, }; -static struct resource sheevaplug_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data sheevaplug_nand_data = { - .parts = sheevaplug_nand_parts, - .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device sheevaplug_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &sheevaplug_nand_data, - }, - .resource = &sheevaplug_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; static struct mvsdio_platform_data sheevaplug_mvsdio_data = { - // unfortunately the CD signal has not been connected */ + /* unfortunately the CD signal has not been connected */ }; static struct gpio_led sheevaplug_led_pins[] = { @@ -111,6 +83,7 @@ static void __init sheevaplug_init(void) kirkwood_mpp_conf(sheevaplug_mpp_config); kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) @@ -120,7 +93,6 @@ static void __init sheevaplug_init(void) kirkwood_ge00_init(&sheevaplug_ge00_data); kirkwood_sdio_init(&sheevaplug_mvsdio_data); - platform_device_register(&sheevaplug_nand_flash); platform_device_register(&sheevaplug_leds); } diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index e83e45e..16295cf 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -52,6 +52,7 @@ /* * Interrupt numbers for PXA910 */ +#define IRQ_PXA910_NONE (-1) #define IRQ_PXA910_AIRQ 0 #define IRQ_PXA910_SSP3 1 #define IRQ_PXA910_SSP2 2 diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 2e91464..3b216bf 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -253,6 +253,10 @@ #define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1) #define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1) +/* I2C */ +#define GPIO105_CI2C_SDA MFP_CFG(GPIO105, AF1) +#define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1) + /* I2S */ #define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) #define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) @@ -260,4 +264,27 @@ #define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) #define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) +/* PWM */ +#define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1) +#define GPIO97_PWM2_OUT MFP_CFG(GPIO97, AF1) +#define GPIO98_PWM1_OUT MFP_CFG(GPIO98, AF1) +#define GPIO104_PWM4_OUT MFP_CFG(GPIO104, AF1) +#define GPIO106_PWM2_OUT MFP_CFG(GPIO106, AF2) +#define GPIO74_PWM4_OUT MFP_CFG(GPIO74, AF2) +#define GPIO75_PWM3_OUT MFP_CFG(GPIO75, AF2) +#define GPIO76_PWM2_OUT MFP_CFG(GPIO76, AF2) +#define GPIO77_PWM1_OUT MFP_CFG(GPIO77, AF2) +#define GPIO82_PWM4_OUT MFP_CFG(GPIO82, AF2) +#define GPIO83_PWM3_OUT MFP_CFG(GPIO83, AF2) +#define GPIO84_PWM2_OUT MFP_CFG(GPIO84, AF2) +#define GPIO85_PWM1_OUT MFP_CFG(GPIO85, AF2) +#define GPIO84_PWM1_OUT MFP_CFG(GPIO84, AF4) +#define GPIO122_PWM3_OUT MFP_CFG(GPIO122, AF3) +#define GPIO123_PWM1_OUT MFP_CFG(GPIO123, AF1) +#define GPIO124_PWM2_OUT MFP_CFG(GPIO124, AF1) +#define GPIO125_PWM3_OUT MFP_CFG(GPIO125, AF1) +#define GPIO126_PWM4_OUT MFP_CFG(GPIO126, AF1) +#define GPIO86_PWM1_OUT MFP_CFG(GPIO86, AF2) +#define GPIO86_PWM2_OUT MFP_CFG(GPIO86, AF3) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index d97de36..bf1189f 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -159,4 +159,12 @@ #define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM) #define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM) +/* PWM */ +#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2) +#define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2) +#define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2) +#define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2) +#define GPIO119_PWM3_OUT MFP_CFG(GPIO119, AF2) +#define GPIO120_PWM4_OUT MFP_CFG(GPIO120, AF2) + #endif /* __ASM_MACH MFP_PXA910_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index ef0a8a2..6bf1f0e 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -1,10 +1,18 @@ #ifndef __ASM_MACH_PXA168_H #define __ASM_MACH_PXA168_H +#include #include +#include extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; +extern struct pxa_device_desc pxa168_device_twsi0; +extern struct pxa_device_desc pxa168_device_twsi1; +extern struct pxa_device_desc pxa168_device_pwm1; +extern struct pxa_device_desc pxa168_device_pwm2; +extern struct pxa_device_desc pxa168_device_pwm3; +extern struct pxa_device_desc pxa168_device_pwm4; static inline int pxa168_add_uart(int id) { @@ -20,4 +28,40 @@ static inline int pxa168_add_uart(int id) return pxa_register_device(d, NULL, 0); } + +static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data, + struct i2c_board_info *info, unsigned size) +{ + struct pxa_device_desc *d = NULL; + int ret; + + switch (id) { + case 0: d = &pxa168_device_twsi0; break; + case 1: d = &pxa168_device_twsi1; break; + default: + return -EINVAL; + } + + ret = i2c_register_board_info(id, info, size); + if (ret) + return ret; + + return pxa_register_device(d, data, sizeof(*data)); +} + +static inline int pxa168_add_pwm(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa168_device_pwm1; break; + case 2: d = &pxa168_device_pwm2; break; + case 3: d = &pxa168_device_pwm3; break; + case 4: d = &pxa168_device_pwm4; break; + default: + return -EINVAL; + } + + return pxa_register_device(d, NULL, 0); +} #endif /* __ASM_MACH_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index b7aeaf5..6ae1ed7 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -1,10 +1,18 @@ #ifndef __ASM_MACH_PXA910_H #define __ASM_MACH_PXA910_H +#include #include +#include extern struct pxa_device_desc pxa910_device_uart1; extern struct pxa_device_desc pxa910_device_uart2; +extern struct pxa_device_desc pxa910_device_twsi0; +extern struct pxa_device_desc pxa910_device_twsi1; +extern struct pxa_device_desc pxa910_device_pwm1; +extern struct pxa_device_desc pxa910_device_pwm2; +extern struct pxa_device_desc pxa910_device_pwm3; +extern struct pxa_device_desc pxa910_device_pwm4; static inline int pxa910_add_uart(int id) { @@ -20,4 +28,40 @@ static inline int pxa910_add_uart(int id) return pxa_register_device(d, NULL, 0); } + +static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data, + struct i2c_board_info *info, unsigned size) +{ + struct pxa_device_desc *d = NULL; + int ret; + + switch (id) { + case 0: d = &pxa910_device_twsi0; break; + case 1: d = &pxa910_device_twsi1; break; + default: + return -EINVAL; + } + + ret = i2c_register_board_info(id, info, size); + if (ret) + return ret; + + return pxa_register_device(d, data, sizeof(*data)); +} + +static inline int pxa910_add_pwm(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa910_device_pwm1; break; + case 2: d = &pxa910_device_pwm2; break; + case 3: d = &pxa910_device_pwm3; break; + case 4: d = &pxa910_device_pwm4; break; + default: + return -EINVAL; + } + + return pxa_register_device(d, NULL, 0); +} #endif /* __ASM_MACH_PXA910_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index c6b8c9d..98ccbee 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -22,8 +22,10 @@ #define APBC_PXA168_UART1 APBC_REG(0x000) #define APBC_PXA168_UART2 APBC_REG(0x004) #define APBC_PXA168_GPIO APBC_REG(0x008) -#define APBC_PXA168_PWM0 APBC_REG(0x00c) -#define APBC_PXA168_PWM1 APBC_REG(0x010) +#define APBC_PXA168_PWM1 APBC_REG(0x00c) +#define APBC_PXA168_PWM2 APBC_REG(0x010) +#define APBC_PXA168_PWM3 APBC_REG(0x014) +#define APBC_PXA168_PWM4 APBC_REG(0x018) #define APBC_PXA168_SSP1 APBC_REG(0x01c) #define APBC_PXA168_SSP2 APBC_REG(0x020) #define APBC_PXA168_RTC APBC_REG(0x028) @@ -48,10 +50,10 @@ #define APBC_PXA910_UART0 APBC_REG(0x000) #define APBC_PXA910_UART1 APBC_REG(0x004) #define APBC_PXA910_GPIO APBC_REG(0x008) -#define APBC_PXA910_PWM0 APBC_REG(0x00c) -#define APBC_PXA910_PWM1 APBC_REG(0x010) -#define APBC_PXA910_PWM2 APBC_REG(0x014) -#define APBC_PXA910_PWM3 APBC_REG(0x018) +#define APBC_PXA910_PWM1 APBC_REG(0x00c) +#define APBC_PXA910_PWM2 APBC_REG(0x010) +#define APBC_PXA910_PWM3 APBC_REG(0x014) +#define APBC_PXA910_PWM4 APBC_REG(0x018) #define APBC_PXA910_SSP1 APBC_REG(0x01c) #define APBC_PXA910_SSP2 APBC_REG(0x020) #define APBC_PXA910_IPC APBC_REG(0x024) diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index ae92446..71b1ae3 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -65,11 +65,23 @@ void __init pxa168_init_irq(void) /* APB peripheral clocks */ static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); +static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); +static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); +static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); +static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); +static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), }; static int __init pxa168_init(void) @@ -109,3 +121,9 @@ struct sys_timer pxa168_timer = { /* on-chip devices */ PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); +PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); +PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); +PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10); +PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10); +PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); +PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 453f8f7..5882ca6 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -103,11 +103,23 @@ void __init pxa910_init_irq(void) /* APB peripheral clocks */ static APBC_CLK(uart1, PXA910_UART0, 1, 14745600); static APBC_CLK(uart2, PXA910_UART1, 1, 14745600); +static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); +static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000); +static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); +static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); +static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); /* device and clock bindings */ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), }; static int __init pxa910_init(void) @@ -156,3 +168,9 @@ struct sys_timer pxa910_timer = { */ PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22); PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24); +PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); +PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); +PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10); +PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); +PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); +PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index f289b0e..22b4ff8 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void) { int i; + /* Initialize gpiolib. */ + orion_gpio_init(); + orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF)); diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c index 0dec6f3..7622c9b 100644 --- a/arch/arm/mach-mx1/generic.c +++ b/arch/arm/mach-mx1/generic.c @@ -26,6 +26,7 @@ #include +#include #include static struct map_desc imx_io_desc[] __initdata = { @@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = { } }; -void __init mxc_map_io(void) +void __init mx1_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX1); + iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index e54057f..e5b0c0a 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -12,77 +12,56 @@ * warranty of any kind, whether express or implied. */ -#include +#include +#include #include +#include #include #include -#include -#include #include #include #include -#include -#include #include -#include -#include +#include #include +#include #include +#include + #include "devices.h" -/* - * UARTs platform data - */ -static int mxc_uart1_pins[] = { +static int mx1ads_pins[] = { + /* UART1 */ PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, PC11_PF_UART1_TXD, PC12_PF_UART1_RXD, -}; - -static int uart1_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static int uart1_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { + /* UART2 */ PB28_PF_UART2_CTS, PB29_PF_UART2_RTS, PB30_PF_UART2_TXD, PB31_PF_UART2_RXD, + /* I2C */ + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, + /* SPI */ + PC13_PF_SPI1_SPI_RDY, + PC14_PF_SPI1_SCLK, + PC15_PF_SPI1_SS, + PC16_PF_SPI1_MISO, + PC17_PF_SPI1_MOSI, }; -static int uart2_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} - -static int uart2_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} +/* + * UARTs platform data + */ static struct imxuart_platform_data uart_pdata[] = { { - .init = uart1_mxc_init, - .exit = uart1_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart2_mxc_init, - .exit = uart2_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; @@ -111,24 +90,6 @@ static struct platform_device flash_device = { /* * I2C */ - -static int i2c_pins[] = { - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, -}; - -static int i2c_init(struct device *dev) -{ - return mxc_gpio_setup_multiple_pins(i2c_pins, - ARRAY_SIZE(i2c_pins), "I2C"); -} - -static void i2c_exit(struct device *dev) -{ - mxc_gpio_release_multiple_pins(i2c_pins, - ARRAY_SIZE(i2c_pins)); -} - static struct pcf857x_platform_data pcf857x_data[] = { { .gpio_base = 4 * 32, @@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = { static struct imxi2c_platform_data mx1ads_i2c_data = { .bitrate = 100000, - .init = i2c_init, - .exit = i2c_exit, }; static struct i2c_board_info mx1ads_i2c_devices[] = { @@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + mxc_gpio_setup_multiple_pins(mx1ads_pins, + ARRAY_SIZE(mx1ads_pins), "mx1ads"); + /* UART */ mxc_register_device(&imx_uart1_device, &uart_pdata[0]); mxc_register_device(&imx_uart2_device, &uart_pdata[1]); @@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, @@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c index 0e71f3f..20e0b5b 100644 --- a/arch/arm/mach-mx1/scb9328.c +++ b/arch/arm/mach-mx1/scb9328.c @@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .phys_io = 0x00200000, .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, .boot_params = 0x08000100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &scb9328_timer, .init_machine = scb9328_init, diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 42a7888..c77da58 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -18,6 +18,13 @@ endchoice comment "MX2 platforms:" +config MACH_MX21ADS + bool "MX21ADS platform" + depends on MACH_MX21 + help + Include support for MX21ADS platform. This includes specific + configurations for the board and its peripherals. + config MACH_MX27ADS bool "MX27ADS platform" depends on MACH_MX27 @@ -46,4 +53,18 @@ config MACH_PCM970_BASEBOARD endchoice +config MACH_MX27_3DS + bool "MX27PDK platform" + depends on MACH_MX27 + help + Include support for MX27PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX27LITE + bool "LogicPD MX27 LITEKIT platform" + depends on MACH_MX27 + help + Include support for MX27 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 950649a..b9b1cca 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -11,6 +11,10 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o +obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o obj-$(CONFIG_MACH_PCM038) += pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o +obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o +obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o + diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index e4b08ca..0850fb8 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -48,6 +48,25 @@ static void _clk_disable(struct clk *clk) __raw_writel(reg, clk->enable_reg); } +static unsigned long _clk_generic_round_rate(struct clk *clk, + unsigned long rate, + u32 max_divisor) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > max_divisor) + div = max_divisor; + + return parent_rate / div; +} + static int _clk_spll_enable(struct clk *clk) { u32 reg; @@ -78,19 +97,7 @@ static void _clk_spll_disable(struct clk *clk) static unsigned long _clk_perclkx_round_rate(struct clk *clk, unsigned long rate) { - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div > 64) - div = 64; - - return parent_rate / div; + return _clk_generic_round_rate(clk, rate, 64); } static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate) @@ -130,6 +137,32 @@ static unsigned long _clk_usb_recalc(struct clk *clk) return parent_rate / (usb_pdf + 1U); } +static unsigned long _clk_usb_round_rate(struct clk *clk, + unsigned long rate) +{ + return _clk_generic_round_rate(clk, rate, 8); +} + +static int _clk_usb_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = CSCR() & ~CCM_CSCR_USB_MASK; + reg |= div << CCM_CSCR_USB_OFFSET; + __raw_writel(reg, CCM_CSCR); + + return 0; +} + static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf) { unsigned long parent_rate; @@ -595,11 +628,14 @@ static struct clk csi_clk[] = { static struct clk usb_clk[] = { { .parent = &spll_clk, + .secondary = &usb_clk[1], .get_rate = _clk_usb_recalc, .enable = _clk_enable, .enable_reg = CCM_PCCR_USBOTG_REG, .enable_shift = CCM_PCCR_USBOTG_OFFSET, .disable = _clk_disable, + .round_rate = _clk_usb_round_rate, + .set_rate = _clk_usb_set_rate, }, { .parent = &hclk_clk, .enable = _clk_enable, @@ -768,18 +804,7 @@ static struct clk rtc_clk = { static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate) { - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div > 8) - div = 8; - - return parent_rate / div; + return _clk_generic_round_rate(clk, rate, 8); } static int _clk_clko_set_rate(struct clk *clk, unsigned long rate) @@ -921,7 +946,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) - _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) + _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0]) _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c index bd51dd0..169372f 100644 --- a/arch/arm/mach-mx2/generic.c +++ b/arch/arm/mach-mx2/generic.c @@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = { * system startup to create static physical to virtual * memory map for the IO modules. */ -void __init mxc_map_io(void) +void __init mx21_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX21); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } + +void __init mx27_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX27); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c new file mode 100644 index 0000000..a5ee461 --- /dev/null +++ b/arch/arm/mach-mx2/mx21ads.c @@ -0,0 +1,286 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static unsigned int mx21ads_pins[] = { + + /* CS8900A */ + (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), + + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + + /* UART3 (IrDA) - only TXD and RXD */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + + /* UART4 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + + /* LCDC */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA24_PF_REV, /* Sharp panel dedicated signal */ + PA25_PF_CLS, /* Sharp panel dedicated signal */ + PA26_PF_PS, /* Sharp panel dedicated signal */ + PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */ + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + + /* MMC/SDHC */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + + /* NFC */ + PF0_PF_NRFB, + PF1_PF_NFCE, + PF2_PF_NFWP, + PF3_PF_NFCLE, + PF4_PF_NFALE, + PF5_PF_NFRE, + PF6_PF_NFWE, + PF7_PF_NFIO0, + PF8_PF_NFIO1, + PF9_PF_NFIO2, + PF10_PF_NFIO3, + PF11_PF_NFIO4, + PF12_PF_NFIO5, + PF13_PF_NFIO6, + PF14_PF_NFIO7, +}; + +/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */ +static struct physmap_flash_data mx21ads_flash_data = { + .width = 4, +}; + +static struct resource mx21ads_flash_resource = { + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + 0x02000000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx21ads_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx21ads_flash_data, + }, + .num_resources = 1, + .resource = &mx21ads_flash_resource, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct imxuart_platform_data uart_norts_pdata = { +}; + + +static int mx21ads_fb_init(struct platform_device *pdev) +{ + u16 tmp; + + tmp = __raw_readw(MX21ADS_IO_REG); + tmp |= MX21ADS_IO_LCDON; + __raw_writew(tmp, MX21ADS_IO_REG); + return 0; +} + +static void mx21ads_fb_exit(struct platform_device *pdev) +{ + u16 tmp; + + tmp = __raw_readw(MX21ADS_IO_REG); + tmp &= ~MX21ADS_IO_LCDON; + __raw_writew(tmp, MX21ADS_IO_REG); +} + +/* + * Connected is a portrait Sharp-QVGA display + * of type: LQ035Q7DB02 + */ +static struct imx_fb_platform_data mx21ads_fb_data = { + .pixclock = 188679, /* in ps */ + .xres = 240, + .yres = 320, + + .bpp = 16, + .hsync_len = 2, + .left_margin = 6, + .right_margin = 16, + + .vsync_len = 1, + .upper_margin = 8, + .lower_margin = 10, + .fixed_screen_cpu = 0, + + .pcr = 0xFB108BC7, + .pwmr = 0x00A901ff, + .lscr1 = 0x00120300, + .dmacr = 0x00020008, + + .init = mx21ads_fb_init, + .exit = mx21ads_fb_exit, +}; + +static int mx21ads_sdhc_get_ro(struct device *dev) +{ + return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; +} + +static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = request_irq(IRQ_GPIOD(25), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); + if (ret) + goto out; + return 0; +out: + return ret; +} + +static void mx21ads_sdhc_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOD(25), data); +} + +static struct imxmmc_platform_data mx21ads_sdhc_pdata = { + .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */ + .get_ro = mx21ads_sdhc_get_ro, + .init = mx21ads_sdhc_init, + .exit = mx21ads_sdhc_exit, +}; + +static struct mxc_nand_platform_data mx21ads_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct map_desc mx21ads_io_desc[] __initdata = { + /* + * Memory-mapped I/O on MX21ADS Base board: + * - CS8900A Ethernet controller + * - ST16C2552CJ UART + * - CPU and Base board version + * - Base board I/O register + */ + { + .virtual = MX21ADS_MMIO_BASE_ADDR, + .pfn = __phys_to_pfn(CS1_BASE_ADDR), + .length = MX21ADS_MMIO_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init mx21ads_map_io(void) +{ + mx21_map_io(); + iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); +} + +static struct platform_device *platform_devices[] __initdata = { + &mx21ads_nor_mtd_device, +}; + +static void __init mx21ads_board_init(void) +{ + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), + "mx21ads"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_norts_pdata); + mxc_register_device(&mxc_uart_device3, &uart_pdata); + mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); + mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); + mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx21ads_timer_init(void) +{ + mx21_clocks_init(32768, 26000000); +} + +static struct sys_timer mx21ads_timer = { + .init = mx21ads_timer_init, +}; + +MACHINE_START(MX21ADS, "Freescale i.MX21ADS") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx21ads_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx21ads_board_init, + .timer = &mx21ads_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c index 4a3b097..02dadda 100644 --- a/arch/arm/mach-mx2/mx27ads.c +++ b/arch/arm/mach-mx2/mx27ads.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include #include @@ -33,9 +35,117 @@ #include #include #include +#include +#include +#include +#include #include "devices.h" +static unsigned int mx27ads_pins[] = { + /* UART0 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART1 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART2 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* UART3 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* UART4 */ + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS, + /* UART5 */ + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* FB */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* OWIRE */ + PE16_AF_OWIRE, + /* SDHC1*/ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* SDHC2*/ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +}; + +static struct mxc_nand_platform_data mx27ads_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + /* ADS's NOR flash */ static struct physmap_flash_data mx27ads_flash_data = { .width = 2, @@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = { .resource = &mx27ads_flash_resource, }; -static int mxc_uart0_pins[] = { - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS +static struct imxi2c_platform_data mx27ads_i2c_data = { + .bitrate = 100000, }; -static int uart_mxc_port0_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins), "UART0"); -} - -static int uart_mxc_port0_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins)); - return 0; -} - -static int mxc_uart1_pins[] = { - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD +static struct i2c_board_info mx27ads_i2c_devices[] = { }; -static int uart_mxc_port1_init(struct platform_device *pdev) +void lcd_power(int on) { - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); + if (on) + __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); + else + __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } -static int uart_mxc_port1_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS +static struct imx_fb_platform_data mx27ads_fb_data = { + .pixclock = 188679, + .xres = 240, + .yres = 320, + + .bpp = 16, + .hsync_len = 1, + .left_margin = 9, + .right_margin = 16, + + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 9, + .fixed_screen_cpu = 0, + + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pcr = 0xFB008BC0, + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, + + .lcd_power = lcd_power, }; -static int uart_mxc_port2_init(struct platform_device *pdev) +static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); + return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING, + "sdhc1-card-detect", data); } -static int uart_mxc_port2_exit(struct platform_device *pdev) +static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; + return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING, + "sdhc2-card-detect", data); } -static int mxc_uart3_pins[] = { - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD -}; - -static int uart_mxc_port3_init(struct platform_device *pdev) +static void mx27ads_sdhc1_exit(struct device *dev, void *data) { - return mxc_gpio_setup_multiple_pins(mxc_uart3_pins, - ARRAY_SIZE(mxc_uart3_pins), "UART3"); + free_irq(IRQ_GPIOE(21), data); } -static int uart_mxc_port3_exit(struct platform_device *pdev) +static void mx27ads_sdhc2_exit(struct device *dev, void *data) { - mxc_gpio_release_multiple_pins(mxc_uart3_pins, - ARRAY_SIZE(mxc_uart3_pins)); - return 0; + free_irq(IRQ_GPIOB(7), data); } -static int mxc_uart4_pins[] = { - PB18_AF_UART5_TXD, - PB19_AF_UART5_RXD, - PB20_AF_UART5_CTS, - PB21_AF_UART5_RTS +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mx27ads_sdhc1_init, + .exit = mx27ads_sdhc1_exit, }; -static int uart_mxc_port4_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart4_pins, - ARRAY_SIZE(mxc_uart4_pins), "UART4"); -} - -static int uart_mxc_port4_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart4_pins, - ARRAY_SIZE(mxc_uart4_pins)); - return 0; -} - -static int mxc_uart5_pins[] = { - PB10_AF_UART6_TXD, - PB12_AF_UART6_CTS, - PB11_AF_UART6_RXD, - PB13_AF_UART6_RTS +static struct imxmmc_platform_data sdhc2_pdata = { + .init = mx27ads_sdhc2_init, + .exit = mx27ads_sdhc2_exit, }; -static int uart_mxc_port5_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart5_pins, - ARRAY_SIZE(mxc_uart5_pins), "UART5"); -} - -static int uart_mxc_port5_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart5_pins, - ARRAY_SIZE(mxc_uart5_pins)); - return 0; -} - static struct platform_device *platform_devices[] __initdata = { &mx27ads_nor_mtd_device, &mxc_fec_device, + &mxc_w1_master_device, }; -static int mxc_fec_pins[] = { - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN -}; - -static void gpio_fec_active(void) -{ - mxc_gpio_setup_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins), "FEC"); -} - static struct imxuart_platform_data uart_pdata[] = { { - .init = uart_mxc_port0_init, - .exit = uart_mxc_port0_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port1_init, - .exit = uart_mxc_port1_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port2_init, - .exit = uart_mxc_port2_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port3_init, - .exit = uart_mxc_port3_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port4_init, - .exit = uart_mxc_port4_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port5_init, - .exit = uart_mxc_port5_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; static void __init mx27ads_board_init(void) { - gpio_fec_active(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), + "mx27ads"); mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); @@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void) mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); + mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info); + + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, mx27ads_i2c_devices, + ARRAY_SIZE(mx27ads_i2c_devices)); + mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data); + mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); + mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = { static void __init mx27ads_map_io(void) { - mxc_map_io(); + mx27_map_io(); iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); } diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c new file mode 100644 index 0000000..3ae11cb --- /dev/null +++ b/arch/arm/mach-mx2/mx27lite.c @@ -0,0 +1,95 @@ +/* + * Copyright 2007 Robert Schwebel , Pengutronix + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static unsigned int mx27lite_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static void __init mx27lite_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), + "imx27lite"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27lite_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mx27lite_timer = { + .init = mx27lite_timer_init, +}; + +MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27lite_init, + .timer = &mx27lite_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c new file mode 100644 index 0000000..1d9238c --- /dev/null +++ b/arch/arm/mach-mx2/mx27pdk.c @@ -0,0 +1,95 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static unsigned int mx27pdk_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static void __init mx27pdk_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), + "mx27pdk"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27pdk_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mx27pdk_timer = { + .init = mx27pdk_timer_init, +}; + +MACHINE_START(MX27_3DS, "Freescale MX27PDK") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27pdk_init, + .timer = &mx27pdk_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index aa4eaa6..a4628d0 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -17,28 +17,84 @@ * MA 02110-1301, USA. */ -#include -#include -#include -#include #include #include +#include +#include +#include +#include -#include #include +#include +#include + +#include #include #include -#include -#ifdef CONFIG_I2C_IMX #include -#endif -#include +#include #include -#include #include #include "devices.h" +static int pcm038_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART2 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART3 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* SPI1 */ + PD25_PF_CSPI1_RDY, + PD27_PF_CSPI1_SS1, + PD28_PF_CSPI1_SS0, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* SSI4 */ + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD, + PC18_PF_SSI4_TXD, + PC19_PF_SSI4_CLK, +}; + /* * Phytec's PCM038 comes with 2MiB battery buffered SRAM, * 16 bit width @@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = { .resource = &pcm038_flash_resource, }; -static int mxc_uart0_pins[] = { - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS -}; - -static int uart_mxc_port0_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins), "UART0"); -} - -static int uart_mxc_port0_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins)); - return 0; -} - -static int mxc_uart1_pins[] = { - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD -}; - -static int uart_mxc_port1_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static int uart_mxc_port1_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS }; - -static int uart_mxc_port2_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} - -static int uart_mxc_port2_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} - static struct imxuart_platform_data uart_pdata[] = { { - .init = uart_mxc_port0_init, - .exit = uart_mxc_port0_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port1_init, - .exit = uart_mxc_port1_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port2_init, - .exit = uart_mxc_port2_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; -static int mxc_fec_pins[] = { - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN -}; - -static void gpio_fec_active(void) -{ - mxc_gpio_setup_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins), "FEC"); -} - static struct mxc_nand_platform_data pcm038_nand_board_info = { .width = 1, .hw_ecc = 1, @@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void) __raw_writel(0x22220a00, CSCR_A(1)); } -#ifdef CONFIG_I2C_IMX -static int mxc_i2c1_pins[] = { - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL -}; - -static int pcm038_i2c_1_init(struct device *dev) -{ - return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins), - "I2C1"); -} - -static void pcm038_i2c_1_exit(struct device *dev) -{ - mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins)); -} - static struct imxi2c_platform_data pcm038_i2c_1_data = { .bitrate = 100000, - .init = pcm038_i2c_1_init, - .exit = pcm038_i2c_1_exit, }; static struct at24_platform_data board_eeprom = { @@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = { .type = "lm75" } }; -#endif static void __init pcm038_init(void) { - gpio_fec_active(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), + "PCM038"); + pcm038_init_sram(); mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); @@ -267,13 +214,11 @@ static void __init pcm038_init(void) mxc_gpio_mode(PE16_AF_OWIRE); mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info); -#ifdef CONFIG_I2C_IMX /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); -#endif platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); @@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .phys_io = AIPI_BASE_ADDR, .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx27_map_io, .init_irq = mxc_init_irq, .init_machine = pcm038_init, .timer = &pcm038_timer, diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index bf4e520..6a3acaf 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -16,71 +16,107 @@ * MA 02110-1301, USA. */ -#include #include #include +#include #include -#include #include -#include -#include #include +#include +#include +#include #include "devices.h" -static int pcm970_sdhc2_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PORTC + 28); -} - -static int pcm970_sdhc2_pins[] = { +static int pcm970_pins[] = { + /* SDHC */ PB4_PF_SD2_D0, PB5_PF_SD2_D1, PB6_PF_SD2_D2, PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, + GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */ + /* display */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* + * it seems the data line misses a pullup, so we must enable + * the internal pullup as a local workaround + */ + PD17_PF_I2C_DATA | GPIO_PUEN, + PD18_PF_I2C_CLK, + /* Camera */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, }; +static int pcm970_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_PORTC + 28); +} + static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { int ret; - ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2"); - if(ret) - return ret; - - ret = request_irq(IRQ_GPIOC(29), detect_irq, 0, + ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) - goto out_release_gpio; - - set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING); + return ret; ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); - if (ret) - goto out_release_gpio; + if (ret) { + free_irq(IRQ_GPIOC(29), data); + return ret; + } - mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN); gpio_direction_input(GPIO_PORTC + 28); return 0; - -out_release_gpio: - mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins)); - return ret; } static void pcm970_sdhc2_exit(struct device *dev, void *data) { free_irq(IRQ_GPIOC(29), data); gpio_free(GPIO_PORTC + 28); - mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins)); } static struct imxmmc_platform_data sdhc_pdata = { @@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pcm970_sdhc2_exit, }; -static int mxc_fb_pins[] = { - PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2, - PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6, - PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10, - PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14, - PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV, - PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC, - PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD -}; - -static int pcm038_fb_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_fb_pins, - ARRAY_SIZE(mxc_fb_pins), "FB"); -} - -static int pcm038_fb_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins)); - - return 0; -} - /* * Connected is a portrait Sharp-QVGA display * of type: LQ035Q7DH06 @@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = { .pwmr = 0x00A903FF, .lscr1 = 0x00120300, .dmacr = 0x00020010, - - .init = pcm038_fb_init, - .exit = pcm038_fb_exit, }; /* @@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = { */ void __init pcm970_baseboard_init(void) { + mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins), + "PCM970"); + mxc_register_device(&mxc_fb_device, &pcm038_fb_data); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 194b842..17a21a2 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -1,10 +1,12 @@ if ARCH_MX3 config ARCH_MX31 + select ARCH_HAS_RNGA bool config ARCH_MX35 bool + select ARCH_MXC_IOMUX_V3 comment "MX3 platforms:" @@ -37,7 +39,6 @@ config MACH_PCM037 config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 - default n help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -45,7 +46,6 @@ config MACH_MX31LITE config MACH_MX31_3DS bool "Support MX31PDK (3DS)" select ARCH_MX31 - default n help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. @@ -53,17 +53,43 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 - default n help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31LILLY + bool "Support MX31 LILLY-1131 platforms (INCO startec)" + select ARCH_MX31 + help + Include support for mx31 based LILLY1131 modules. This includes + specific configurations for the board and its peripherals. + config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" select ARCH_MX31 - default n help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM043 + bool "Support Phytec pcm043 (i.MX35) platforms" + select ARCH_MX35 + help + Include support for Phytec pcm043 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_ARMADILLO5X0 + bool "Support Atmark Armadillo-500 Development Base Board" + select ARCH_MX31 + help + Include support for Atmark Armadillo-500 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_MX35_3DS + bool "Support MX35PDK platform" + select ARCH_MX35 + default n + help + Include support for MX35PDK platform. This includes specific + configurations for the board and its peripherals. endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 272c8a9..0322696 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -8,9 +8,13 @@ obj-y := mm.o devices.o obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o obj-$(CONFIG_ARCH_MX35) += clock-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o +obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o obj-$(CONFIG_MACH_QONG) += qong.o +obj-$(CONFIG_MACH_PCM043) += pcm043.o +obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o +obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c new file mode 100644 index 0000000..5411810 --- /dev/null +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -0,0 +1,295 @@ +/* + * armadillo5x0.c + * + * Copyright 2009 Alberto Panizzo + * updates in http://alberdroid.blogspot.com/ + * + * Based on Atmark Techno, Inc. armadillo 500 BSP 2008 + * Based on mx31ads.c and pcm037.c Great Work! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static int armadillo5x0_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* UART2 */ + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + /* LAN9118_IRQ */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ + +}; + +/* + * FB support + */ +static const struct fb_videomode fb_modedb[] = { + { /* 640x480 @ 60 Hz */ + .name = "CRT-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 35, + .right_margin = 115, + .upper_margin = 43, + .lower_margin = 1, + .hsync_len = 10, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, {/* 800x600 @ 56 Hz */ + .name = "CRT-SVGA", + .refresh = 56, + .xres = 800, + .yres = 600, + .pixclock = 30000, + .left_margin = 30, + .right_margin = 108, + .upper_margin = 13, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "CRT-VGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +/* + * SDHC 1 + * MMC support + */ +static int armadillo5x0_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); +} + +static int armadillo5x0_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + int gpio_det, gpio_wp; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B); + + ret = gpio_request(gpio_det, "sdhc-card-detect"); + if (ret) + return ret; + + gpio_direction_input(gpio_det); + + ret = gpio_request(gpio_wp, "sdhc-write-protect"); + if (ret) + goto err_gpio_free; + + gpio_direction_input(gpio_wp); + + /* When supported the trigger type have to be BOTH */ + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "sdhc-detect", data); + + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(gpio_wp); + +err_gpio_free: + gpio_free(gpio_det); + + return ret; + +} + +static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); +} + +static struct imxmmc_platform_data sdhc_pdata = { + .get_ro = armadillo5x0_sdhc1_get_ro, + .init = armadillo5x0_sdhc1_init, + .exit = armadillo5x0_sdhc1_exit, +}; + +/* + * SMSC 9118 + * Network support + */ +static struct resource armadillo5x0_smc911x_resources[] = { + { + .start = CS3_BASE_ADDR, + .end = CS3_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_info = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device armadillo5x0_smc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources), + .resource = armadillo5x0_smc911x_resources, + .dev = { + .platform_data = &smsc911x_info, + }, +}; + +/* UART device data */ +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &armadillo5x0_smc911x_device, +}; + +/* + * Perform board specific initializations + */ +static void __init armadillo5x0_init(void) +{ + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, + ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* Register UART */ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + /* SMSC9118 IRQ pin */ + gpio_direction_input(MX31_PIN_GPIO1_0); + + /* Register SDHC */ + mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + + /* Register FB */ + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); +} + +static void __init armadillo5x0_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer armadillo5x0_timer = { + .init = armadillo5x0_timer_init, +}; + +MACHINE_START(ARMADILLO5X0, "Armadillo-500") + /* Maintainer: Alberto Panizzo */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = mx31_map_io, + .init_irq = mxc_init_irq, + .timer = &armadillo5x0_timer, + .init_machine = armadillo5x0_init, +MACHINE_END diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 3c1e06f..577ee83 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = { { .arm = 0, .ahb = 0, .sel = 0}, }; -static struct arm_ahb_div clk_automotive[] = { - { .arm = 1, .ahb = 3, .sel = 0}, - { .arm = 1, .ahb = 2, .sel = 1}, - { .arm = 2, .ahb = 1, .sel = 1}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 1, .ahb = 6, .sel = 0}, - { .arm = 1, .ahb = 4, .sel = 1}, - { .arm = 2, .ahb = 2, .sel = 1}, - { .arm = 0, .ahb = 0, .sel = 0}, -}; - static unsigned long get_rate_arm(void) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); - if (pdr0 & 1) { - /* consumer path */ - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - if (aad->sel) - fref = fref * 2 / 3; - } else { - /* auto path */ - aad = &clk_automotive[(pdr0 >> 9) & 0x7]; - if (aad->sel) - fref = fref * 3 / 4; - } + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; + if (aad->sel) + fref = fref * 2 / 3; + return fref / aad->arm; } @@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk) struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); - if (pdr0 & 1) - /* consumer path */ - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - else - /* auto path */ - aad = &clk_automotive[(pdr0 >> 9) & 0x7]; + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; return fref / aad->ahb; } @@ -430,7 +407,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk) - _REGISTER_CLOCK(NULL, "ipu", ipu_clk) + _REGISTER_CLOCK("ipu-core", NULL, ipu_clk) + _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk) _REGISTER_CLOCK(NULL, "kpp", kpp_clk) _REGISTER_CLOCK(NULL, "mlb", mlb_clk) _REGISTER_CLOCK(NULL, "mshc", mshc_clk) @@ -462,8 +440,6 @@ int __init mx35_clocks_init() int i; unsigned int ll = 0; - mxc_set_cpu_type(MXC_CPU_MX35); - #ifdef CONFIG_DEBUG_LL_CONSOLE ll = (3 << 16); #endif diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index a68fcf9..8b14239 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -483,7 +483,7 @@ DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk); DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk); DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk); -DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk); +DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk); DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk); DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk); DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk); @@ -566,13 +566,18 @@ int __init mx31_clocks_init(unsigned long fref) u32 reg; int i; - mxc_set_cpu_type(MXC_CPU_MX31); - ckih_rate = fref; for (i = 0; i < ARRAY_SIZE(lookups); i++) clkdev_add(&lookups[i]); + /* change the csi_clk parent if necessary */ + reg = __raw_readl(MXC_CCM_CCMR); + if (!(reg & MXC_CCM_CCMR_CSCS)) + if (clk_set_parent(&csi_clk, &usb_pll_clk)) + pr_err("%s: error changing csi_clk parent\n", __func__); + + /* Turn off all possible clocks */ __raw_writel((3 << 4), MXC_CCM_CGR0); __raw_writel(0, MXC_CCM_CGR1); @@ -581,6 +586,12 @@ int __init mx31_clocks_init(unsigned long fref) MX32, but still required to be set */ MXC_CCM_CGR2); + /* + * Before turning off usb_pll make sure ipg_per_clk is generated + * by ipg_clk and not usb_pll. + */ + __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR); + usb_pll_disable(&usb_pll_clk); pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk)); diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 380be0c..d927edd 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -17,13 +17,17 @@ * Boston, MA 02110-1301, USA. */ +#include #include #include #include #include +#include #include #include +#include #include +#include #include "devices.h" @@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = { .num_resources = ARRAY_SIZE(mxcsdhc1_resources), .resource = mxcsdhc1_resources, }; + +static struct resource rnga_resources[] = { + { + .start = RNGA_BASE_ADDR, + .end = RNGA_BASE_ADDR + 0x28, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_rnga_device = { + .name = "mxc_rnga", + .id = -1, + .num_resources = 1, + .resource = rnga_resources, +}; #endif /* CONFIG_ARCH_MX31 */ /* i.MX31 Image Processing Unit */ @@ -329,10 +348,54 @@ struct platform_device mx3_fb = { .num_resources = ARRAY_SIZE(fb_resources), .resource = fb_resources, .dev = { - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; +static struct resource camera_resources[] = { + { + .start = IPU_CTRL_BASE_ADDR + 0x60, + .end = IPU_CTRL_BASE_ADDR + 0x87, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mx3_camera = { + .name = "mx3-camera", + .id = 0, + .num_resources = ARRAY_SIZE(camera_resources), + .resource = camera_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource otg_resources[] = { + { + .start = OTG_BASE_ADDR, + .end = OTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB3, + .end = MXC_INT_USB3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 otg_dmamask = DMA_BIT_MASK(32); + +/* OTG gadget device */ +struct platform_device mxc_otg_udc_device = { + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &otg_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = otg_resources, + .num_resources = ARRAY_SIZE(otg_resources), +}; + #ifdef CONFIG_ARCH_MX35 static struct resource mxc_fec_resources[] = { { @@ -359,6 +422,7 @@ static int mx3_devices_init(void) if (cpu_is_mx31()) { mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; + mxc_register_device(&mxc_rnga_device, NULL); } if (cpu_is_mx35()) { mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 88c04b2..ffd494d 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -11,6 +11,10 @@ extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_i2c_device2; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; +extern struct platform_device mx3_camera; extern struct platform_device mxc_fec_device; extern struct platform_device mxcsdhc_device0; extern struct platform_device mxcsdhc_device1; +extern struct platform_device mxc_otg_udc_device; +extern struct platform_device mxc_rnga_device; + diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c index 40ffc5a..c66ccbc 100644 --- a/arch/arm/mach-mx3/iomux.c +++ b/arch/arm/mach-mx3/iomux.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) EXPORT_SYMBOL(mxc_iomux_set_pad); /* - * setups a single pin: + * allocs a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ -int mxc_iomux_setup_pin(const unsigned int pin, const char *label) +int mxc_iomux_alloc_pin(const unsigned int pin, const char *label) { unsigned pad = pin & IOMUX_PADNUM_MASK; - unsigned gpio; if (pad >= (PIN_MAX + 1)) { printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", @@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label) if (test_and_set_bit(pad, mxc_pin_alloc_map)) { printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", pad, label ? label : "?"); - return -EINVAL; + return -EBUSY; } mxc_iomux_mode(pin); - /* if we have a gpio, we can allocate it */ - gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; - if (gpio < (GPIO_PORT_MAX + 1) * 32) - if (gpio_request(gpio, label)) - return -EINVAL; - return 0; } -EXPORT_SYMBOL(mxc_iomux_setup_pin); +EXPORT_SYMBOL(mxc_iomux_alloc_pin); int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, const char *label) @@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, int ret = -EINVAL; for (i = 0; i < count; i++) { - if (mxc_iomux_setup_pin(*p, label)) + ret = mxc_iomux_alloc_pin(*p, label); + if (ret) goto setup_error; p++; } @@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); void mxc_iomux_release_pin(const unsigned int pin) { unsigned pad = pin & IOMUX_PADNUM_MASK; - unsigned gpio; if (pad < (PIN_MAX + 1)) clear_bit(pad, mxc_pin_alloc_map); - - gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; - if (gpio < (GPIO_PORT_MAX + 1) * 32) - gpio_free(gpio); } EXPORT_SYMBOL(mxc_iomux_release_pin); diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 9e1459c..1f5fdd4 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = { * system startup to create static physical to virtual memory mappings * for the IO modules. */ -void __init mxc_map_io(void) +void __init mx31_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX31); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + +void __init mx35_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index a6d6efe..30e2767 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void) /* * Configure INT line as GPIO input */ - mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); @@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = { */ static void __init mx31ads_map_io(void) { - mxc_map_io(); + mx31_map_io(); iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); } diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c new file mode 100644 index 0000000..3b3a78f --- /dev/null +++ b/arch/arm/mach-mx3/mx31lilly-db.c @@ -0,0 +1,216 @@ +/* + * LILLY-1131 development board support + * + * Copyright (c) 2009 Daniel Mack + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +/* + * This file contains board-specific initialization routines for the + * LILLY-1131 development board. If you design an own baseboard for the + * module, use this file as base for support code. + */ + +static unsigned int lilly_db_board_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_CONTRAST__CONTRAST, +}; + +/* UART */ +static struct imxuart_platform_data uart_pdata __initdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* MMC support */ + +static int mxc_mmc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); +} + +static int gpio_det, gpio_wp; + +static int mxc_mmc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0); + + ret = gpio_request(gpio_det, "MMC detect"); + if (ret) + return ret; + + ret = gpio_request(gpio_wp, "MMC w/p"); + if (ret) + goto exit_free_det; + + gpio_direction_input(gpio_det); + gpio_direction_input(gpio_wp); + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "MMC detect", data); + if (ret) + goto exit_free_wp; + + return 0; + +exit_free_wp: + gpio_free(gpio_wp); + +exit_free_det: + gpio_free(gpio_det); + + return ret; +} + +static void mxc_mmc1_exit(struct device *dev, void *data) +{ + gpio_free(gpio_det); + gpio_free(gpio_wp); + free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); +} + +static struct imxmmc_platform_data mmc_pdata = { + .get_ro = mxc_mmc1_get_ro, + .init = mxc_mmc1_init, + .exit = mxc_mmc1_exit, +}; + +/* Framebuffer support */ +static struct ipu_platform_data ipu_data __initdata = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static const struct fb_videomode fb_modedb = { + /* 640x480 TFT panel (IPS-056T) */ + .name = "CRT-VGA", + .refresh = 64, + .xres = 640, + .yres = 480, + .pixclock = 30000, + .left_margin = 200, + .right_margin = 2, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 3, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct mx3fb_platform_data fb_pdata __initdata = { + .dma_dev = &mx3_ipu.dev, + .name = "CRT-VGA", + .mode = &fb_modedb, + .num_modes = 1, +}; + +#define LCD_VCC_EN_GPIO (7) + +static void __init mx31lilly_init_fb(void) +{ + if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) { + printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n"); + return; + } + + mxc_register_device(&mx3_ipu, &ipu_data); + mxc_register_device(&mx3_fb, &fb_pdata); + gpio_direction_output(LCD_VCC_EN_GPIO, 1); +} + +void __init mx31lilly_db_init(void) +{ + mxc_iomux_setup_multiple_pins(lilly_db_board_pins, + ARRAY_SIZE(lilly_db_board_pins), + "development board pins"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_pdata); + mxc_register_device(&mxcsdhc_device0, &mmc_pdata); + mx31lilly_init_fb(); +} + diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c new file mode 100644 index 0000000..6ab2f16 --- /dev/null +++ b/arch/arm/mach-mx3/mx31lilly.c @@ -0,0 +1,155 @@ +/* + * LILLY-1131 module support + * + * Copyright (c) 2009 Daniel Mack + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "devices.h" + +/* + * This file contains module-specific initialization routines for LILLY-1131. + * Initialization of peripherals found on the baseboard is implemented in the + * appropriate baseboard support code. + */ + +/* SMSC ethernet support */ + +static struct resource smsc91x_resources[] = { + { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | + SMSC911X_SAVE_MAC_ADDRESS | + SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc91x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc91x_resources), + .resource = smsc91x_resources, + .dev = { + .platform_data = &smsc911x_config, + } +}; + +/* NOR flash */ +static struct physmap_flash_data nor_flash_data = { + .width = 2, +}; + +static struct resource nor_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device physmap_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_flash_data, + }, + .resource = &nor_flash_resource, + .num_resources = 1, +}; + +static struct platform_device *devices[] __initdata = { + &smsc91x_device, + &physmap_flash_device, + &mxc_i2c_device1, +}; + +static int mx31lilly_baseboard; +core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); + +static void __init mx31lilly_board_init(void) +{ + switch (mx31lilly_baseboard) { + case MX31LILLY_NOBOARD: + break; + case MX31LILLY_DB: + mx31lilly_db_init(); + break; + default: + printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n", + mx31lilly_baseboard); + } + + mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init mx31lilly_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer mx31lilly_timer = { + .init = mx31lilly_timer_init, +}; + +MACHINE_START(LILLY1131, "INCO startec LILLY-1131") + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx31lilly_board_init, + .timer = &mx31lilly_timer, +MACHINE_END + diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index 894d98c..86fe70f 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -22,6 +22,9 @@ #include #include #include +#include +#include +#include #include #include @@ -32,11 +35,64 @@ #include #include #include +#include +#include +#include +#include +#include "devices.h" /* * This file contains the board-specific initialization routines. */ +static unsigned int mx31lite_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* LAN9117 IRQ pin */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct mxc_nand_platform_data mx31lite_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + /* * This structure defines the MX31 memory map. */ @@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = { */ void __init mx31lite_map_io(void) { - mxc_map_io(); + mx31_map_io(); iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); } @@ -68,6 +124,22 @@ void __init mx31lite_map_io(void) */ static void __init mxc_board_init(void) { + int ret; + + mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), + "mx31lite"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info); + + /* SMSC9117 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + platform_device_register(&smsc911x_device); + } } static void __init mx31lite_timer_init(void) diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index d080b4a..4704405 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -16,33 +16,142 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include +#include +#include #include - +#include #include +#include -#include #include #include #include +#include +#include #include "devices.h" +static unsigned int devboard_pins[] = { + /* UART1 */ + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, +}; + static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int mxc_uart1_pins[] = { - MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int devboard_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC2_WP); +} + +static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void devboard_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static struct imxmmc_platform_data sdhc2_pdata = { + .get_ro = devboard_sdhc2_get_ro, + .init = devboard_sdhc2_init, + .exit = devboard_sdhc2_exit, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, }; +#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void devboard_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ void __init mx31moboard_devboard_init(void) { printk(KERN_INFO "Initializing mx31devboard peripherals\n"); - mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1"); + + mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), + "devboard"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + devboard_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 9ef9566..641c3d6 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -16,22 +16,144 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include +#include +#include #include - +#include #include +#include -#include #include +#include #include #include +#include #include "devices.h" +static unsigned int marxbot_pins[] = { + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* CSI */ + MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, + MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, + MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, + MX31_PIN_TXD2__GPIO1_28, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, +}; + +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int marxbot_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC2_WP); +} + +static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void marxbot_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static struct imxmmc_platform_data sdhc2_pdata = { + .get_ro = marxbot_sdhc2_get_ro, + .init = marxbot_sdhc2_init, + .exit = marxbot_sdhc2_exit, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void marxbot_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ void __init mx31moboard_marxbot_init(void) { printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); + + mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), + "marxbot"); + + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + marxbot_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 34c2a1b..a17f2e4 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -16,26 +16,47 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include +#include #include - -#include +#include +#include #include #include -#include +#include +#include -#include #include #include #include #include +#include #include +#include #include #include -#include +#include +#include #include "devices.h" +static unsigned int moboard_pins[] = { + /* UART0 */ + MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, + /* UART4 */ + MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + /* I2C0 */ + MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL, + /* I2C1 */ + MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, +}; + static struct physmap_flash_data mx31moboard_flash_data = { .width = 2, }; @@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct platform_device *devices[] __initdata = { - &mx31moboard_flash, +static struct imxi2c_platform_data moboard_i2c0_pdata = { + .bitrate = 400000, }; -static int mxc_uart0_pins[] = { - MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, +static struct imxi2c_platform_data moboard_i2c1_pdata = { + .bitrate = 100000, }; -static int mxc_uart4_pins[] = { - MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, - MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + +#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) +#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) + +static int moboard_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC1_WP); +} + +static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC1_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_CD); + + ret = gpio_request(SDHC1_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_WP); + + ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc1-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC1_WP); +err_gpio_free: + gpio_free(SDHC1_CD); + + return ret; +} + +static void moboard_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC1_CD), data); + gpio_free(SDHC1_WP); + gpio_free(SDHC1_CD); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .get_ro = moboard_sdhc1_get_ro, + .init = moboard_sdhc1_init, + .exit = moboard_sdhc1_exit, +}; + +static struct platform_device *devices[] __initdata = { + &mx31moboard_flash, }; static int mx31moboard_baseboard; @@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mxc_board_init(void) { + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), + "moboard"); + platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4"); mxc_register_device(&mxc_uart_device4, &uart_pdata); + mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); + mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); + + mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata); + switch (mx31moboard_baseboard) { case MX31NOBOARD: break; @@ -99,7 +177,8 @@ static void __init mxc_board_init(void) mx31moboard_marxbot_init(); break; default: - printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard); + printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", + mx31moboard_baseboard); } } @@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31moboard_timer, diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c index bc63f17..c19838d 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mx31pdk.c @@ -20,6 +20,9 @@ #include #include #include +#include +#include +#include #include #include @@ -41,21 +44,192 @@ * @ingroup System */ +static int mx31pdk_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), +}; + static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int uart_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 +/* + * Support for the SMSC9217 on the Debug board. + */ + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource smsc911x_resources[] = { + { + .start = LAN9217_BASE_ADDR, + .end = LAN9217_BASE_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = EXPIO_INT_ENET, + .end = EXPIO_INT_ENET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, }; -static inline void mxc_init_imx_uart(void) +/* + * Routines for the CPLD on the debug board. It contains a CPLD handling + * LEDs, switches, interrupts for Ethernet. + */ + +static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc) { - mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + uint32_t imr_val; + uint32_t int_valid; + uint32_t expio_irq; + + imr_val = __raw_readw(CPLD_INT_MASK_REG); + int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val; + + expio_irq = MXC_EXP_IO_BASE; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + if ((int_valid & 1) == 0) + continue; + generic_handle_irq(expio_irq); + } +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * @param irq an expio virtual irq number + */ +static void expio_mask_irq(uint32_t irq) +{ + uint16_t reg; + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* mask the interrupt */ + reg = __raw_readw(CPLD_INT_MASK_REG); + reg |= 1 << expio; + __raw_writew(reg, CPLD_INT_MASK_REG); +} + +/* + * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. + * @param irq an expanded io virtual irq number + */ +static void expio_ack_irq(uint32_t irq) +{ + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* clear the interrupt status */ + __raw_writew(1 << expio, CPLD_INT_RESET_REG); + __raw_writew(0, CPLD_INT_RESET_REG); + /* mask the interrupt */ + expio_mask_irq(irq); +} + +/* + * Enable a expio pin's interrupt by clearing the bit in the imr. + * @param irq a expio virtual irq number + */ +static void expio_unmask_irq(uint32_t irq) +{ + uint16_t reg; + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* unmask the interrupt */ + reg = __raw_readw(CPLD_INT_MASK_REG); + reg &= ~(1 << expio); + __raw_writew(reg, CPLD_INT_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .ack = expio_ack_irq, + .mask = expio_mask_irq, + .unmask = expio_unmask_irq, +}; + +static int __init mx31pdk_init_expio(void) +{ + int i; + int ret; + + /* Check if there's a debug board connected */ + if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) || + (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) || + (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) { + /* No Debug board found */ + return -ENODEV; + } + + pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n", + __raw_readw(CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + + /* Disable the interrupts and clear the status */ + __raw_writew(0, CPLD_INT_MASK_REG); + __raw_writew(0xFFFF, CPLD_INT_RESET_REG); + __raw_writew(0, CPLD_INT_RESET_REG); + __raw_writew(0x1F, CPLD_INT_MASK_REG); + for (i = MXC_EXP_IO_BASE; + i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); + i++) { + set_irq_chip(i, &expio_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler); + + return 0; +} + +/* + * This structure defines the MX31 memory map. + */ +static struct map_desc mx31pdk_io_desc[] __initdata = { + { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_DEVICE_NONSHARED, + }, { + .virtual = CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS5_BASE_ADDR), + .length = CS5_SIZE, + .type = MT_DEVICE, + }, +}; + +/* + * Set up static virtual mappings. + */ +static void __init mx31pdk_map_io(void) +{ + mx31_map_io(); + iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc)); } /*! @@ -63,7 +237,13 @@ static inline void mxc_init_imx_uart(void) */ static void __init mxc_board_init(void) { - mxc_init_imx_uart(); + mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins), + "mx31pdk"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + if (!mx31pdk_init_expio()) + platform_device_register(&smsc911x_device); } static void __init mx31pdk_timer_init(void) @@ -84,7 +264,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31pdk_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31pdk_timer, diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c new file mode 100644 index 0000000..6d15374 --- /dev/null +++ b/arch/arm/mach-mx3/mx35pdk.c @@ -0,0 +1,104 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "devices.h" + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &mxc_fec_device, +}; + +static struct pad_desc mx35pdk_pads[] = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); +} + +static void __init mx35pdk_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer mx35pdk_timer = { + .init = mx35pdk_timer_init, +}; + +MACHINE_START(MX35_3DS, "Freescale MX35PDK") + /* Maintainer: Freescale Semiconductor, Inc */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &mx35pdk_timer, +MACHINE_END diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index b5227d8..c6f61a1 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -28,6 +28,10 @@ #include #include #include +#include +#include +#include +#include #include #include @@ -37,7 +41,9 @@ #include #include #include +#include #include +#include #include #include #ifdef CONFIG_I2C_IMX @@ -46,6 +52,76 @@ #include "devices.h" +static unsigned int pcm037_pins[] = { + /* I2C */ + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */ + /* SPI1 */ + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* UART2 */ + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + /* UART3 */ + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, + /* LAN9217 irq pin */ + IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), + /* Onewire */ + MX31_PIN_BATT_LINE__OWIRE, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_D3_REV__D3_REV, + MX31_PIN_CONTRAST__CONTRAST, + MX31_PIN_D3_SPL__D3_SPL, + MX31_PIN_D3_CLS__D3_CLS, + MX31_PIN_LCS0__GPI03_23, +}; + static struct physmap_flash_data pcm037_flash_data = { .width = 2, }; @@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = { .flags = IORESOURCE_MEM, }; +static int usbotg_pins[] = { + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, +}; + +/* USB OTG HS port */ +static int __init gpio_usbotg_hs_activate(void) +{ + int ret = mxc_iomux_setup_multiple_pins(usbotg_pins, + ARRAY_SIZE(usbotg_pins), "usbotg"); + + if (ret < 0) { + printk(KERN_ERR "Cannot set up OTG pins\n"); + return ret; + } + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + return 0; +} + +/* OTG config */ +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + static struct platform_device pcm037_flash = { .name = "physmap-flash", .id = 0, @@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { }; #ifdef CONFIG_I2C_IMX -static int i2c_1_pins[] = { - MX31_PIN_CSPI2_MOSI__SCL, - MX31_PIN_CSPI2_MISO__SDA, -}; - -static int pcm037_i2c_1_init(struct device *dev) -{ - return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins), - "i2c-1"); -} - -static void pcm037_i2c_1_exit(struct device *dev) -{ - mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins)); -} - static struct imxi2c_platform_data pcm037_i2c_1_data = { .bitrate = 100000, - .init = pcm037_i2c_1_init, - .exit = pcm037_i2c_1_exit, }; static struct at24_platform_data board_eeprom = { @@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = { }; #endif -static int sdhc1_pins[] = { - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, -}; +/* Not connected by default */ +#ifdef PCM970_SDHC_RW_SWITCH +static int pcm970_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6)); +} +#endif + +#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6) +#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6) -static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data) +static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins), - "sdhc-1"); + int ret; + + ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_GPIO_DET); + +#ifdef PCM970_SDHC_RW_SWITCH + ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_GPIO_WP); +#endif + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "sdhc-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: +#ifdef PCM970_SDHC_RW_SWITCH + gpio_free(SDHC1_GPIO_WP); +err_gpio_free: +#endif + gpio_free(SDHC1_GPIO_DET); + + return ret; } static void pcm970_sdhc1_exit(struct device *dev, void *data) { - mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins)); + free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data); + gpio_free(SDHC1_GPIO_DET); + gpio_free(SDHC1_GPIO_WP); } -/* No card and rw detection at the moment */ static struct imxmmc_platform_data sdhc_pdata = { +#ifdef PCM970_SDHC_RW_SWITCH + .get_ro = pcm970_sdhc1_get_ro, +#endif .init = pcm970_sdhc1_init, .exit = pcm970_sdhc1_exit, }; static struct platform_device *devices[] __initdata = { &pcm037_flash, - &pcm037_eth, &pcm037_sram_device, }; -static int uart0_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, }; -static int uart2_pins[] = { - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3 +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz Sharp */ + .name = "Sharp-LQ035Q7DH06-QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Sharp-LQ035Q7DH06-QVGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), }; /* @@ -215,21 +392,28 @@ static int uart2_pins[] = { */ static void __init mxc_board_init(void) { + int ret; + + mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), + "pcm037"); + platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); mxc_register_device(&mxc_uart_device2, &uart_pdata); - mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); /* LAN9217 IRQ pin */ - if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), - "pcm037-eth")) + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + platform_device_register(&pcm037_eth); + } + #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, @@ -239,6 +423,10 @@ static void __init mxc_board_init(void) #endif mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); + if (!gpio_usbotg_hs_activate()) + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } static void __init pcm037_timer_init(void) @@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &pcm037_timer, diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c new file mode 100644 index 0000000..8d27c32 --- /dev/null +++ b/arch/arm/mach-mx3/pcm043.c @@ -0,0 +1,252 @@ +/* + * Copyright (C) 2009 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE +#include +#endif +#include +#include +#include + +#include "devices.h" + +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz */ + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Sharp-LQ035Q7", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct physmap_flash_data pcm043_flash_data = { + .width = 2, +}; + +static struct resource pcm043_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm043_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm043_flash_data, + }, + .resource = &pcm043_flash_resource, + .num_resources = 1, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE +static struct imxi2c_platform_data pcm043_i2c_1_data = { + .bitrate = 50000, +}; + +static struct at24_platform_data board_eeprom = { + .byte_len = 4096, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info pcm043_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ + .platform_data = &board_eeprom, + }, { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563", + } +}; +#endif + +static struct platform_device *devices[] __initdata = { + &pcm043_flash, + &mxc_fec_device, +}; + +static struct pad_desc pcm043_pads[] = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* UART2 */ + MX35_PAD_CTS2__UART2_CTS, + MX35_PAD_RTS2__UART2_RTS, + MX35_PAD_TXD2__UART2_TXD_MUX, + MX35_PAD_RXD2__UART2_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* I2C1 */ + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_uart_device1, &uart_pdata); + +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE + i2c_register_board_info(0, pcm043_i2c_devices, + ARRAY_SIZE(pcm043_i2c_devices)); + + mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data); +#endif + + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); +} + +static void __init pcm043_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer pcm043_timer = { + .init = pcm043_timer_init, +}; + +MACHINE_START(PCM043, "Phytec Phycore pcm043") + /* Maintainer: Pengutronix */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &pcm043_timer, +MACHINE_END + diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 5a01e48..82b31c4 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index 79df60c..43da8bb 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -168,7 +168,7 @@ void __init netx_init_irq(void) { int irq; - vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0); + vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0); for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { set_irq_chip(irq, &netx_hif_chip); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index cd8de89..55ecc01 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -46,7 +46,6 @@ config MACH_OMAP_H2 config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX -# select GPIOEXPANDER_OMAP help TI OMAP 1710 H3 board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 1bda8f5..6867cd3 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management obj-$(CONFIG_PM) += pm.o sleep.o +# DSP +obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o +mailbox_mach-objs := mailbox.o + led-y := leds.o # Specific board support diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index d1ed136..e70fc7c 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -33,8 +33,11 @@ #include #include #include +#include #include #include +#include +#include #define ADS7846_PENDOWN_GPIO 15 @@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { }, }; +static struct hwa742_platform_data nokia770_hwa742_platform_data = { + .te_connected = 1, +}; + +static void hwa742_dev_init(void) +{ + clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); + omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); +} /* assume no Mini-AB port */ @@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); omap_dsp_init(); + hwa742_dev_init(); ads7846_dev_init(); mipid_dev_init(); omap_usb_init(&nokia770_usb_config); diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 336e51d..436eed2 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -776,7 +776,7 @@ int __init omap1_clk_init(void) arm_idlect1_mask = ~0; for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); cpu_mask = 0; if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 9774c1f..5218943 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -53,11 +53,12 @@ #include #include #include -#include #include #include #include +#include "pm.h" + static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; @@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; * going idle we continue to do idle even if we get * a clock tick interrupt . . */ -void omap_pm_idle(void) +void omap1_pm_idle(void) { extern __u32 arm_idlect1_mask; __u32 use_idlect1 = arm_idlect1_mask; @@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void) #define EN_APICK 6 /* ARM_IDLECT2 */ #define DSP_EN 1 /* ARM_RSTCT1 */ -void omap_pm_suspend(void) +void omap1_pm_suspend(void) { unsigned long arg0 = 0, arg1 = 0; @@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: - omap_pm_suspend(); + omap1_pm_suspend(); break; default: return -EINVAL; @@ -683,7 +684,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap_pm_idle; + pm_idle = omap1_pm_idle; if (cpu_is_omap730()) setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h new file mode 100644 index 0000000..9ed5e2c --- /dev/null +++ b/arch/arm/mach-omap1/pm.h @@ -0,0 +1,280 @@ +/* + * arch/arm/mach-omap1/pm.h + * + * Header file for OMAP1 Power Management Routines + * + * Author: MontaVista Software, Inc. + * support@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * Cleanup 2004 for Linux 2.6 by Dirk Behme + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_PM_H +#define __ARCH_ARM_MACH_OMAP1_PM_H + +/* + * ---------------------------------------------------------------------------- + * Register and offset definitions to be used in PM assembler code + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00) +#define ARM_IDLECT1_ASM_OFFSET 0x04 +#define ARM_IDLECT2_ASM_OFFSET 0x08 + +#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00) +#define EMIFS_CONFIG_ASM_OFFSET 0x0c +#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 + +/* + * ---------------------------------------------------------------------------- + * Power management bitmasks + * ---------------------------------------------------------------------------- + */ +#define IDLE_WAIT_CYCLES 0x00000fff +#define PERIPHERAL_ENABLE 0x2 + +#define SELF_REFRESH_MODE 0x0c000001 +#define IDLE_EMIFS_REQUEST 0xc +#define MODEM_32K_EN 0x1 +#define PER_EN 0x1 + +#define CPU_SUSPEND_SIZE 200 +#define ULPD_LOW_PWR_EN 0x0001 +#define ULPD_DEEP_SLEEP_TRANSITION_EN 0x0010 +#define ULPD_SETUP_ANALOG_CELL_3_VAL 0 +#define ULPD_POWER_CTRL_REG_VAL 0x0219 + +#define DSP_IDLE_DELAY 10 +#define DSP_IDLE 0x0040 +#define DSP_RST 0x0004 +#define DSP_ENABLE 0x0002 +#define SUFFICIENT_DSP_RESET_TIME 1000 +#define DEFAULT_MPUI_CONFIG 0x05cf +#define ENABLE_XORCLK 0x2 +#define DSP_CLOCK_ENABLE 0x2000 +#define DSP_IDLE_MODE 0x2 +#define TC_IDLE_REQUEST (0x0000000c) + +#define IRQ_LEVEL2 (1<<0) +#define IRQ_KEYBOARD (1<<1) +#define IRQ_UART2 (1<<15) + +#define PDE_BIT 0x08 +#define PWD_EN_BIT 0x04 +#define EN_PERCK_BIT 0x04 + +#define OMAP1510_DEEP_SLEEP_REQUEST 0x0ec7 +#define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5 +#define OMAP1510_IDLE_LOOP_REQUEST 0x0c00 +#define OMAP1510_IDLE_CLOCK_DOMAINS 0x2 + +/* Both big sleep and deep sleep use same values. Difference is in ULPD. */ +#define OMAP1610_IDLECT1_SLEEP_VAL 0x13c7 +#define OMAP1610_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP1610_IDLECT3_VAL 0x3f +#define OMAP1610_IDLECT3_SLEEP_ORMASK 0x2c +#define OMAP1610_IDLECT3 0xfffece24 +#define OMAP1610_IDLE_LOOP_REQUEST 0x0400 + +#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 +#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP730_IDLECT3_VAL 0x3f +#define OMAP730_IDLECT3 0xfffece24 +#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 + +#if !defined(CONFIG_ARCH_OMAP730) && \ + !defined(CONFIG_ARCH_OMAP15XX) && \ + !defined(CONFIG_ARCH_OMAP16XX) +#warning "Power management for this processor not implemented yet" +#endif + +#ifndef __ASSEMBLER__ + +#include + +extern struct kset power_subsys; + +extern void prevent_idle_sleep(void); +extern void allow_idle_sleep(void); + +extern void omap1_pm_idle(void); +extern void omap1_pm_suspend(void); + +extern void omap730_cpu_suspend(unsigned short, unsigned short); +extern void omap1510_cpu_suspend(unsigned short, unsigned short); +extern void omap1610_cpu_suspend(unsigned short, unsigned short); +extern void omap730_idle_loop_suspend(void); +extern void omap1510_idle_loop_suspend(void); +extern void omap1610_idle_loop_suspend(void); + +extern unsigned int omap730_cpu_suspend_sz; +extern unsigned int omap1510_cpu_suspend_sz; +extern unsigned int omap1610_cpu_suspend_sz; +extern unsigned int omap730_idle_loop_suspend_sz; +extern unsigned int omap1510_idle_loop_suspend_sz; +extern unsigned int omap1610_idle_loop_suspend_sz; + +#ifdef CONFIG_OMAP_SERIAL_WAKE +extern void omap_serial_wake_trigger(int enable); +#else +#define omap_serial_wakeup_init() {} +#define omap_serial_wake_trigger(x) {} +#endif /* CONFIG_OMAP_SERIAL_WAKE */ + +#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x) +#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x)) +#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] + +#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x) +#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x)) +#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] + +#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x) +#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) +#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] + +#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) +#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] + +#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) +#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] + +#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x)) +#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] + +/* + * List of global OMAP registers to preserve. + * More ones like CP and general purpose register values are preserved + * with the stack pointer in sleep.S. + */ + +enum arm_save_state { + ARM_SLEEP_SAVE_START = 0, + /* + * MPU control registers 32 bits + */ + ARM_SLEEP_SAVE_ARM_CKCTL, + ARM_SLEEP_SAVE_ARM_IDLECT1, + ARM_SLEEP_SAVE_ARM_IDLECT2, + ARM_SLEEP_SAVE_ARM_IDLECT3, + ARM_SLEEP_SAVE_ARM_EWUPCT, + ARM_SLEEP_SAVE_ARM_RSTCT1, + ARM_SLEEP_SAVE_ARM_RSTCT2, + ARM_SLEEP_SAVE_ARM_SYSST, + ARM_SLEEP_SAVE_SIZE +}; + +enum dsp_save_state { + DSP_SLEEP_SAVE_START = 0, + /* + * DSP registers 16 bits + */ + DSP_SLEEP_SAVE_DSP_IDLECT2, + DSP_SLEEP_SAVE_SIZE +}; + +enum ulpd_save_state { + ULPD_SLEEP_SAVE_START = 0, + /* + * ULPD registers 16 bits + */ + ULPD_SLEEP_SAVE_ULPD_IT_STATUS, + ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL, + ULPD_SLEEP_SAVE_ULPD_SOFT_REQ, + ULPD_SLEEP_SAVE_ULPD_STATUS_REQ, + ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL, + ULPD_SLEEP_SAVE_ULPD_POWER_CTRL, + ULPD_SLEEP_SAVE_SIZE +}; + +enum mpui1510_save_state { + MPUI1510_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI1510_SLEEP_SAVE_MPUI_CTRL, + MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI1510_SLEEP_SAVE_EMIFS_CONFIG, + MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR, +#if defined(CONFIG_ARCH_OMAP15XX) + MPUI1510_SLEEP_SAVE_SIZE +#else + MPUI1510_SLEEP_SAVE_SIZE = 0 +#endif +}; + +enum mpui730_save_state { + MPUI730_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI730_SLEEP_SAVE_MPUI_CTRL, + MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI730_SLEEP_SAVE_EMIFS_CONFIG, + MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, +#if defined(CONFIG_ARCH_OMAP730) + MPUI730_SLEEP_SAVE_SIZE +#else + MPUI730_SLEEP_SAVE_SIZE = 0 +#endif +}; + +enum mpui1610_save_state { + MPUI1610_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI1610_SLEEP_SAVE_MPUI_CTRL, + MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI1610_SLEEP_SAVE_EMIFS_CONFIG, + MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR, +#if defined(CONFIG_ARCH_OMAP16XX) + MPUI1610_SLEEP_SAVE_SIZE +#else + MPUI1610_SLEEP_SAVE_SIZE = 0 +#endif +}; + +#endif /* ASSEMBLER */ +#endif /* __ASM_ARCH_OMAP_PM_H */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 842090b..f754cee 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -26,9 +26,6 @@ #include #include #include -#ifdef CONFIG_PM -#include -#endif static struct clk * uart1_ck; static struct clk * uart2_ck; diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index f3eac93..22e8568 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -35,7 +35,7 @@ #include #include #include -#include +#include "pm.h" .text diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 64ab386..a755eb5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -25,7 +25,7 @@ config ARCH_OMAP3430 select ARCH_OMAP_OTG comment "OMAP Board Type" - depends on ARCH_OMAP2 || ARCH_OMAP3 + depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 config MACH_OMAP_GENERIC bool "Generic OMAP board" @@ -56,6 +56,10 @@ config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_OMAP3EVM + bool "OMAP 3530 EVM board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX @@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_ZOOM2 + bool "OMAP3 Zoom2 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_4430SDP + bool "OMAP 4430 SDP board" + depends on ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index c49d9bf..735bae5 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,12 +3,21 @@ # # Common support -obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \ - devices.o serial.o gpmc.o timer-gp.o powerdomain.o \ - clockdomain.o +obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o + +omap-2-3-common = irq.o sdrc.o +prcm-common = prcm.o powerdomain.o +clock-common = clock.o clockdomain.o + +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +# SMP support ONLY available for OMAP4 +obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o + # Functions loaded to SRAM obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o @@ -20,14 +29,21 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # Power Management ifeq ($(CONFIG_PM),y) -obj-y += pm.o +obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o +obj-$(CONFIG_PM_DEBUG) += pm-debug.o endif # Clock framework obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +iommu-y += iommu2.o +iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o + +obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -40,6 +56,8 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \ mmc-twl4030.o +obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ @@ -48,8 +66,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-peripherals.o \ mmc-twl4030.o +obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ + mmc-twl4030.o \ + board-zoom-debugboard.o + +obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o # Platform specific device init code -ifeq ($(CONFIG_USB_MUSB_SOC),y) obj-y += usb-musb.o -endif + +onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o +obj-y += $(onenand-m) $(onenand-y) + +smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o +obj-y += $(smc91x-m) $(smc91x-y) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 2214365..9c3fdcd 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -36,14 +36,12 @@ #include #include #include +#include #include "mmc-twl4030.h" #define SDP2430_CS0_BASE 0x04000000 -#define SDP2430_FLASH_CS 0 -#define SDP2430_SMC91X_CS 5 - -#define SDP2430_ETHR_GPIO_IRQ 149 +#define SECONDARY_LCD_GPIO 147 static struct mtd_partition sdp2430_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = { .resource = &sdp2430_flash_resource, }; -static struct resource sdp2430_smc91x_resources[] = { - [0] = { - .start = SDP2430_CS0_BASE, - .end = SDP2430_CS0_BASE + SZ_64M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device sdp2430_smc91x_device = { - .name = "smc91x", +static struct platform_device sdp2430_lcd_device = { + .name = "sdp2430_lcd", .id = -1, - .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources), - .resource = sdp2430_smc91x_resources, }; static struct platform_device *sdp2430_devices[] __initdata = { - &sdp2430_smc91x_device, &sdp2430_flash_device, + &sdp2430_lcd_device, }; -static inline void __init sdp2430_init_smc91x(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int rate; - struct clk *gpmc_fck; +static struct omap_lcd_config sdp2430_lcd_config __initdata = { + .ctrl_name = "internal", +}; - eth_cs = SDP2430_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 5, + .gpio_irq = 149, + .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | + IORESOURCE_IRQ_LOWLEVEL, - clk_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - - /* Make sure CS1 timings are correct, for 2430 always muxed */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else { /* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } +}; - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } +static void __init board_smc91x_init(void) +{ + if (omap_rev() > OMAP3430_REV_ES1_0) + board_smc91x_data.gpio_irq = 6; + else + board_smc91x_data.gpio_irq = 29; - sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300; - sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f; - udelay(100); + gpmc_smc91x_init(&board_smc91x_data); +} - if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - SDP2430_ETHR_GPIO_IRQ); - gpmc_cs_free(eth_cs); - goto out; - } - gpio_direction_input(SDP2430_ETHR_GPIO_IRQ); +#else -out: - clk_disable(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init omap_2430sdp_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); - sdp2430_init_smc91x(); } static struct omap_uart_config sdp2430_uart_config __initdata = { @@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = { static struct omap_board_config_kernel sdp2430_config[] = { {OMAP_TAG_UART, &sdp2430_uart_config}, + {OMAP_TAG_LCD, &sdp2430_lcd_config}, }; @@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static void __init omap_2430sdp_init(void) { + int ret; + omap2430_i2c_init(); platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); @@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void) omap_serial_init(); twl4030_mmc_init(mmc); usb_musb_init(); + board_smc91x_init(); + + /* Turn off secondary LCD backlight */ + ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight"); + if (ret == 0) + gpio_direction_output(SECONDARY_LCD_GPIO, 0); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ed92749..496a90e 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -39,15 +39,13 @@ #include #include +#include +#include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" #define CONFIG_DISABLE_HFCLK 1 -#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29 -#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6 -#define SDP3430_SMC91X_CS 3 - #define SDP3430_TS_GPIO_IRQ_SDPV1 3 #define SDP3430_TS_GPIO_IRQ_SDPV2 2 @@ -56,24 +54,6 @@ #define TWL4030_MSECURE_GPIO 22 -static struct resource sdp3430_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device sdp3430_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources), - .resource = sdp3430_smc91x_resources, -}; - static int sdp3430_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = { }; static struct platform_device *sdp3430_devices[] __initdata = { - &sdp3430_smc91x_device, &sdp3430_lcd_device, }; -static inline void __init sdp3430_init_smc91x(void) -{ - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = SDP3430_SMC91X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300; - sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f; - udelay(100); - - if (omap_rev() > OMAP3430_REV_ES1_0) - eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2; - else - eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1; - - sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio); - - if (gpio_request(eth_gpio, "SMC91x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); -} - static void __init omap_3430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(hyb18m512160af6_sdrc_params); omap_init_irq(); omap_gpio_init(); - sdp3430_init_smc91x(); } static struct omap_uart_config sdp3430_uart_config __initdata = { @@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void) return 0; } +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 3, + .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | + IORESOURCE_IRQ_LOWLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + if (omap_rev() > OMAP3430_REV_ES1_0) + board_smc91x_data.gpio_irq = 6; + else + board_smc91x_data.gpio_irq = 29; + + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif + static void __init omap_3430sdp_init(void) { omap3430_i2c_init(); @@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void) ads7846_dev_init(); omap_serial_init(); usb_musb_init(); + board_smc91x_init(); } static void __init omap_3430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c new file mode 100644 index 0000000..57e477b --- /dev/null +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -0,0 +1,94 @@ +/* + * Board support file for OMAP4430 SDP. + * + * Copyright (C) 2009 Texas Instruments + * + * Author: Santosh Shilimkar + * + * Based on mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static struct platform_device sdp4430_lcd_device = { + .name = "sdp4430_lcd", + .id = -1, +}; + +static struct platform_device *sdp4430_devices[] __initdata = { + &sdp4430_lcd_device, +}; + +static struct omap_uart_config sdp4430_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2), +}; + +static struct omap_lcd_config sdp4430_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel sdp4430_config[] __initdata = { + { OMAP_TAG_UART, &sdp4430_uart_config }, + { OMAP_TAG_LCD, &sdp4430_lcd_config }, +}; + +static void __init gic_init_irq(void) +{ + gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); + gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); +} + +static void __init omap_4430sdp_init_irq(void) +{ + omap2_init_common_hw(NULL); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(1); +#endif + gic_init_irq(); + omap_gpio_init(); +} + + +static void __init omap_4430sdp_init(void) +{ + platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); + omap_serial_init(); +} + +static void __init omap_4430sdp_map_io(void) +{ + omap2_set_globals_443x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") + /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_4430sdp_map_io, + .init_irq = omap_4430sdp_init_irq, + .init_machine = omap_4430sdp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index da57b0f..d8bc0a7 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -16,11 +16,13 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include #include @@ -39,6 +41,7 @@ #include #include #include +#include #include "mmc-twl4030.h" @@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = { }, }; -static struct platform_device *ldp_devices[] __initdata = { - &ldp_smsc911x_device, +static int ldp_twl4030_keymap[] = { + KEY(0, 0, KEY_1), + KEY(1, 0, KEY_2), + KEY(2, 0, KEY_3), + KEY(0, 1, KEY_4), + KEY(1, 1, KEY_5), + KEY(2, 1, KEY_6), + KEY(3, 1, KEY_F5), + KEY(0, 2, KEY_7), + KEY(1, 2, KEY_8), + KEY(2, 2, KEY_9), + KEY(3, 2, KEY_F6), + KEY(0, 3, KEY_F7), + KEY(1, 3, KEY_0), + KEY(2, 3, KEY_F8), + PERSISTENT_KEY(4, 5), + KEY(4, 4, KEY_VOLUMEUP), + KEY(5, 5, KEY_VOLUMEDOWN), + 0 +}; + +static struct twl4030_keypad_data ldp_kp_twl4030_data = { + .rows = 6, + .cols = 6, + .keymap = ldp_twl4030_keymap, + .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap), + .rep = 1, +}; + +static struct gpio_keys_button ldp_gpio_keys_buttons[] = { + [0] = { + .code = KEY_ENTER, + .gpio = 101, + .desc = "enter sw", + .active_low = 1, + .debounce_interval = 30, + }, + [1] = { + .code = KEY_F1, + .gpio = 102, + .desc = "func 1", + .active_low = 1, + .debounce_interval = 30, + }, + [2] = { + .code = KEY_F2, + .gpio = 103, + .desc = "func 2", + .active_low = 1, + .debounce_interval = 30, + }, + [3] = { + .code = KEY_F3, + .gpio = 104, + .desc = "func 3", + .active_low = 1, + .debounce_interval = 30, + }, + [4] = { + .code = KEY_F4, + .gpio = 105, + .desc = "func 4", + .active_low = 1, + .debounce_interval = 30, + }, + [5] = { + .code = KEY_LEFT, + .gpio = 106, + .desc = "left sw", + .active_low = 1, + .debounce_interval = 30, + }, + [6] = { + .code = KEY_RIGHT, + .gpio = 107, + .desc = "right sw", + .active_low = 1, + .debounce_interval = 30, + }, + [7] = { + .code = KEY_UP, + .gpio = 108, + .desc = "up sw", + .active_low = 1, + .debounce_interval = 30, + }, + [8] = { + .code = KEY_DOWN, + .gpio = 109, + .desc = "down sw", + .active_low = 1, + .debounce_interval = 30, + }, +}; + +static struct gpio_keys_platform_data ldp_gpio_keys = { + .buttons = ldp_gpio_keys_buttons, + .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons), + .rep = 1, +}; + +static struct platform_device ldp_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &ldp_gpio_keys, + }, +}; + +static int ts_gpio; + +/** + * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq + * + * @return - void. If request gpio fails then Flag KERN_ERR. + */ +static void ads7846_dev_init(void) +{ + if (gpio_request(ts_gpio, "ads7846 irq") < 0) { + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + return; + } + + gpio_direction_input(ts_gpio); + omap_set_gpio_debounce(ts_gpio, 1); + omap_set_gpio_debounce_time(ts_gpio, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(ts_gpio); +} + +static struct ads7846_platform_data tsc2046_config __initdata = { + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config tsc2046_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info ldp_spi_board_info[] __initdata = { + [0] = { + /* + * TSC2046 operates at a max freqency of 2MHz, so + * operate slightly below at 1.5MHz + */ + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &tsc2046_mcspi_config, + .irq = 0, + .platform_data = &tsc2046_config, + }, }; static inline void __init ldp_init_smsc911x(void) @@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct platform_device ldp_lcd_device = { + .name = "ldp_lcd", + .id = -1, +}; + +static struct omap_lcd_config ldp_lcd_config __initdata = { + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel ldp_config[] __initdata = { { OMAP_TAG_UART, &ldp_uart_config }, + { OMAP_TAG_LCD, &ldp_lcd_config }, +}; + +static struct twl4030_usb_data ldp_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, }; static struct twl4030_gpio_platform_data ldp_gpio_data = { @@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = { .irq_end = TWL4030_GPIO_IRQ_END, }; +static struct twl4030_madc_platform_data ldp_madc_data = { + .irq_line = 1, +}; + +static struct regulator_consumer_supply ldp_vmmc1_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data ldp_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ldp_vmmc1_supply, +}; + static struct twl4030_platform_data ldp_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ + .madc = &ldp_madc_data, + .usb = &ldp_usb_data, + .vmmc1 = &ldp_vmmc1, .gpio = &ldp_gpio_data, + .keypad = &ldp_kp_twl4030_data, }; static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = { @@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; +static struct platform_device *ldp_devices[] __initdata = { + &ldp_smsc911x_device, + &ldp_lcd_device, + &ldp_gpio_keys_device, +}; + static void __init omap_ldp_init(void) { omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); omap_board_config = ldp_config; omap_board_config_size = ARRAY_SIZE(ldp_config); + ts_gpio = 54; + ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio); + spi_register_board_info(ldp_spi_board_info, + ARRAY_SIZE(ldp_spi_board_info)); + ads7846_dev_init(); omap_serial_init(); - twl4030_mmc_init(mmc); usb_musb_init(); + + twl4030_mmc_init(mmc); + /* link regulators to MMC adapters */ + ldp_vmmc1_supply.dev = mmc[0].dev; } static void __init omap_ldp_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 3a7a29d..991ac9c 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,7 @@ #include #include +#include #include #include @@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = { .resource = &omap3beagle_nand_resource, }; +#include "sdram-micron-mt46h32m32lf-6.h" + static struct omap_uart_config omap3_beagle_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct platform_device omap3_beagle_lcd_device = { + .name = "omap3beagle_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct regulator_consumer_supply beagle_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply beagle_vsim_supply = { + .supply = "vmmc_aux", +}; + static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, @@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); + /* link regulators to MMC adapters */ + beagle_vmmc1_supply.dev = mmc[0].dev; + beagle_vsim_supply.dev = mmc[0].dev; + /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ @@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = { .setup = beagle_twl_gpio_setup, }; +static struct regulator_consumer_supply beagle_vdac_supply = { + .supply = "vdac", + .dev = &omap3_beagle_lcd_device.dev, +}; + +static struct regulator_consumer_supply beagle_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_beagle_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data beagle_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data beagle_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data beagle_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data beagle_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vdvi_supply, +}; + static struct twl4030_platform_data beagle_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .gpio = &beagle_gpio_data, + .vmmc1 = &beagle_vmmc1, + .vsim = &beagle_vsim, + .vdac = &beagle_vdac, + .vpll2 = &beagle_vpll2, }; static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { @@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void) omap_gpio_init(); } -static struct platform_device omap3_beagle_lcd_device = { - .name = "omap3beagle_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { - .ctrl_name = "internal", -}; - static struct gpio_led gpio_leds[] = { { .name = "beagleboard::usr0", diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c new file mode 100644 index 0000000..d3cc145 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -0,0 +1,329 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3evm.c + * + * Copyright (C) 2008 Texas Instruments + * + * Modified from mach-omap2/board-3430sdp.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "sdram-micron-mt46h32m32lf-6.h" +#include "mmc-twl4030.h" + +#define OMAP3_EVM_TS_GPIO 175 + +#define OMAP3EVM_ETHR_START 0x2c000000 +#define OMAP3EVM_ETHR_SIZE 1024 +#define OMAP3EVM_ETHR_GPIO_IRQ 176 +#define OMAP3EVM_SMC911X_CS 5 + +static struct resource omap3evm_smc911x_resources[] = { + [0] = { + .start = OMAP3EVM_ETHR_START, + .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap3evm_smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources), + .resource = &omap3evm_smc911x_resources[0], +}; + +static inline void __init omap3evm_init_smc911x(void) +{ + int eth_cs; + struct clk *l3ck; + unsigned int rate; + + eth_cs = OMAP3EVM_SMC911X_CS; + + l3ck = clk_get(NULL, "l3_ck"); + if (IS_ERR(l3ck)) + rate = 100000000; + else + rate = clk_get_rate(l3ck); + + if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + OMAP3EVM_ETHR_GPIO_IRQ); + return; + } + + gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); +} + +static struct omap_uart_config omap3_evm_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = 63, + }, + {} /* Terminator */ +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "omap3evm::ledb", + /* normally not visible (board underside) */ + .default_trigger = "default-on", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + + +static int omap3evm_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(L8_34XX_GPIO63); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* + * Most GPIOs are for USB OTG. Some are mostly sent to + * the P2 connector; notably LEDA for the LCD backlight. + */ + + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + platform_device_register(&leds_gpio); + + return 0; +} + +static struct twl4030_gpio_platform_data omap3evm_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .setup = omap3evm_twl_gpio_setup, +}; + +static struct twl4030_usb_data omap3evm_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static int omap3evm_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P) +}; + +static struct twl4030_keypad_data omap3evm_kp_data = { + .rows = 4, + .cols = 4, + .keymap = omap3evm_keymap, + .keymapsize = ARRAY_SIZE(omap3evm_keymap), + .rep = 1, +}; + +static struct twl4030_madc_platform_data omap3evm_madc_data = { + .irq_line = 1, +}; + +static struct twl4030_platform_data omap3evm_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .keypad = &omap3evm_kp_data, + .madc = &omap3evm_madc_data, + .usb = &omap3evm_usb_data, + .gpio = &omap3evm_gpio_data, +}; + +static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &omap3evm_twldata, + }, +}; + +static int __init omap3_evm_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo, + ARRAY_SIZE(omap3evm_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static struct platform_device omap3_evm_lcd_device = { + .name = "omap3evm_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_evm_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static void ads7846_dev_init(void) +{ + if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0) + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); + + gpio_direction_input(OMAP3_EVM_TS_GPIO); + + omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(OMAP3_EVM_TS_GPIO); +} + +struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, + .settle_delay_usecs = 150, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +struct spi_board_info omap3evm_spi_board_info[] = { + [0] = { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO), + .platform_data = &ads7846_config, + }, +}; + +static void __init omap3_evm_init_irq(void) +{ + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap_init_irq(); + omap_gpio_init(); + omap3evm_init_smc911x(); +} + +static struct omap_board_config_kernel omap3_evm_config[] __initdata = { + { OMAP_TAG_UART, &omap3_evm_uart_config }, + { OMAP_TAG_LCD, &omap3_evm_lcd_config }, +}; + +static struct platform_device *omap3_evm_devices[] __initdata = { + &omap3_evm_lcd_device, + &omap3evm_smc911x_device, +}; + +static void __init omap3_evm_init(void) +{ + omap3_evm_i2c_init(); + + platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); + omap_board_config = omap3_evm_config; + omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + + spi_register_board_info(omap3evm_spi_board_info, + ARRAY_SIZE(omap3evm_spi_board_info)); + + omap_serial_init(); + usb_musb_init(); + ads7846_dev_init(); +} + +static void __init omap3_evm_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP3EVM, "OMAP3 EVM") + /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_evm_map_io, + .init_irq = omap3_evm_init_irq, + .init_machine = omap3_evm_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 402f09c..e32aa23 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -23,7 +23,11 @@ #include #include +#include #include +#include +#include +#include #include #include @@ -35,11 +39,154 @@ #include #include #include +#include +#include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" #define OMAP3_PANDORA_TS_GPIO 94 +/* hardware debounce: (value + 1) * 31us */ +#define GPIO_DEBOUNCE_TIME 127 + +static struct gpio_led pandora_gpio_leds[] = { + { + .name = "pandora::sd1", + .default_trigger = "mmc0", + .gpio = 128, + }, { + .name = "pandora::sd2", + .default_trigger = "mmc1", + .gpio = 129, + }, { + .name = "pandora::bluetooth", + .gpio = 158, + }, { + .name = "pandora::wifi", + .gpio = 159, + }, +}; + +static struct gpio_led_platform_data pandora_gpio_led_data = { + .leds = pandora_gpio_leds, + .num_leds = ARRAY_SIZE(pandora_gpio_leds), +}; + +static struct platform_device pandora_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &pandora_gpio_led_data, + }, +}; + +#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ +{ \ + .gpio = gpio_num, \ + .type = ev_type, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ +} + +#define GPIO_BUTTON_LOW(gpio_num, event_code, description) \ + GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description) + +static struct gpio_keys_button pandora_gpio_keys[] = { + GPIO_BUTTON_LOW(110, KEY_UP, "up"), + GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), + GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), + GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), + GPIO_BUTTON_LOW(111, BTN_A, "a"), + GPIO_BUTTON_LOW(106, BTN_B, "b"), + GPIO_BUTTON_LOW(109, BTN_X, "x"), + GPIO_BUTTON_LOW(101, BTN_Y, "y"), + GPIO_BUTTON_LOW(102, BTN_TL, "l"), + GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), + GPIO_BUTTON_LOW(105, BTN_TR, "r"), + GPIO_BUTTON_LOW(107, BTN_TR2, "r2"), + GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"), + GPIO_BUTTON_LOW(99, KEY_MENU, "menu"), + GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"), + GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"), + GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"), +}; + +static struct gpio_keys_platform_data pandora_gpio_key_info = { + .buttons = pandora_gpio_keys, + .nbuttons = ARRAY_SIZE(pandora_gpio_keys), +}; + +static struct platform_device pandora_keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &pandora_gpio_key_info, + }, +}; + +static void __init pandora_keys_gpio_init(void) +{ + /* set debounce time for GPIO banks 4 and 6 */ + omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME); + omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); +} + +static int pandora_keypad_map[] = { + /* col, row, code */ + KEY(0, 0, KEY_9), + KEY(0, 1, KEY_0), + KEY(0, 2, KEY_BACKSPACE), + KEY(0, 3, KEY_O), + KEY(0, 4, KEY_P), + KEY(0, 5, KEY_K), + KEY(0, 6, KEY_L), + KEY(0, 7, KEY_ENTER), + KEY(1, 0, KEY_8), + KEY(1, 1, KEY_7), + KEY(1, 2, KEY_6), + KEY(1, 3, KEY_5), + KEY(1, 4, KEY_4), + KEY(1, 5, KEY_3), + KEY(1, 6, KEY_2), + KEY(1, 7, KEY_1), + KEY(2, 0, KEY_I), + KEY(2, 1, KEY_U), + KEY(2, 2, KEY_Y), + KEY(2, 3, KEY_T), + KEY(2, 4, KEY_R), + KEY(2, 5, KEY_E), + KEY(2, 6, KEY_W), + KEY(2, 7, KEY_Q), + KEY(3, 0, KEY_J), + KEY(3, 1, KEY_H), + KEY(3, 2, KEY_G), + KEY(3, 3, KEY_F), + KEY(3, 4, KEY_D), + KEY(3, 5, KEY_S), + KEY(3, 6, KEY_A), + KEY(3, 7, KEY_LEFTSHIFT), + KEY(4, 0, KEY_N), + KEY(4, 1, KEY_B), + KEY(4, 2, KEY_V), + KEY(4, 3, KEY_C), + KEY(4, 4, KEY_X), + KEY(4, 5, KEY_Z), + KEY(4, 6, KEY_DOT), + KEY(4, 7, KEY_COMMA), + KEY(5, 0, KEY_M), + KEY(5, 1, KEY_SPACE), + KEY(5, 2, KEY_FN), +}; + +static struct twl4030_keypad_data pandora_kp_data = { + .rows = 8, + .cols = 6, + .keymap = pandora_keypad_map, + .keymapsize = ARRAY_SIZE(pandora_keypad_map), + .rep = 1, +}; + static struct twl4030_hsmmc_info omap3pandora_mmc[] = { { .mmc = 1, @@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = { .enabled_uarts = (1 << 2), /* UART3 */ }; +static struct regulator_consumer_supply pandora_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply pandora_vmmc2_supply = { + .supply = "vmmc", +}; + static int omap3pandora_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, omap3pandora_mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(omap3pandora_mmc); + /* link regulators to MMC adapters */ + pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev; + pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev; + return 0; } @@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { .setup = omap3pandora_twl_gpio_setup, }; +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data pandora_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vmmc1_supply, +}; + +/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ +static struct regulator_init_data pandora_vmmc2 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vmmc2_supply, +}; + static struct twl4030_usb_data omap3pandora_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = { .irq_end = TWL4030_IRQ_END, .gpio = &omap3pandora_gpio_data, .usb = &omap3pandora_usb_data, + .vmmc1 = &pandora_vmmc1, + .vmmc2 = &pandora_vmmc2, + .keypad = &pandora_kp_data, }; static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { @@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = { static struct platform_device *omap3pandora_devices[] __initdata = { &omap3pandora_lcd_device, + &pandora_leds_gpio, + &pandora_keys_gpio, }; static void __init omap3pandora_init(void) @@ -201,6 +395,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); + pandora_keys_gpio_init(); usb_musb_init(); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b1f23be..dff5528 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -45,6 +46,7 @@ #include #include +#include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" #define OVERO_GPIO_BT_XGATE 15 @@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + { + .mmc = 2, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .transceiver = true, + .ocr_mask = 0x00100000, /* 3.3V */ + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply overo_vmmc1_supply = { + .supply = "vmmc", +}; + +static int overo_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + twl4030_mmc_init(mmc); + + overo_vmmc1_supply.dev = mmc[0].dev; + + return 0; +} + static struct twl4030_gpio_platform_data overo_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, + .setup = overo_twl_gpio_setup, +}; + +static struct twl4030_usb_data overo_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct regulator_init_data overo_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vmmc1_supply, }; +/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ + static struct twl4030_platform_data overo_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, .gpio = &overo_gpio_data, + .usb = &overo_usb_data, + .vmmc1 = &overo_vmmc1, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { { - I2C_BOARD_INFO("twl4030", 0x48), + I2C_BOARD_INFO("tps65950", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, .platform_data = &overo_twldata, @@ -303,7 +360,7 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; -static struct twl4030_hsmmc_info mmc[] __initdata = { - { - .mmc = 1, - .wires = 4, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { - .mmc = 2, - .wires = 4, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .transceiver = true, - }, - {} /* Terminator */ -}; - static void __init overo_init(void) { overo_i2c_init(); @@ -350,7 +390,6 @@ static void __init overo_init(void) omap_board_config = overo_config; omap_board_config_size = ARRAY_SIZE(overo_config); omap_serial_init(); - twl4030_mmc_init(mmc); overo_flash_init(); usb_musb_init(); overo_ads7846_init(); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index a738172..da93b86 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -27,30 +27,13 @@ #include #include #include +#include +#include #include "mmc-twl4030.h" - -#define SMC91X_CS 1 -#define SMC91X_GPIO_IRQ 54 -#define SMC91X_GPIO_RESET 164 -#define SMC91X_GPIO_PWRDWN 86 - -static struct resource rx51_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device rx51_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(rx51_smc91x_resources), - .resource = rx51_smc91x_resources, -}; +#define SYSTEM_REV_B_USES_VAUX3 0x1699 +#define SYSTEM_REV_S_USES_VAUX3 0x8 static int rx51_keymap[] = { KEY(0, 0, KEY_Q), @@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = { .rep = 1, }; -static struct platform_device *rx51_peripherals_devices[] = { - &rx51_smc91x_device, -}; - -/* - * Timings are taken from smsc-lan91c96-ms.pdf - */ -static int smc91x_init_gpmc(int cs) -{ - struct gpmc_timings t; - const int t2_r = 45; /* t2 in Figure 12.10 */ - const int t2_w = 30; /* t2 in Figure 12.11 */ - const int t3 = 15; /* t3 in Figure 12.10 */ - const int t5_r = 0; /* t5 in Figure 12.10 */ - const int t6_r = 45; /* t6 in Figure 12.10 */ - const int t6_w = 0; /* t6 in Figure 12.11 */ - const int t7_w = 15; /* t7 in Figure 12.11 */ - const int t15 = 12; /* t15 in Figure 12.2 */ - const int t20 = 185; /* t20 in Figure 12.2 */ - - memset(&t, 0, sizeof(t)); - - t.cs_on = t15; - t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */ - t.adv_on = t3; /* Figure 12.10 */ - t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */ - t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */ - t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */ - t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */ - t.we_on = t.we_off - t7_w; /* Figure 12.11 */ - t.rd_cycle = t20; /* Figure 12.2 */ - t.wr_cycle = t20; /* Figure 12.4 */ - t.access = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */ - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16); - - return gpmc_cs_set_timings(cs, &t); -} - -static void __init rx51_init_smc91x(void) -{ - unsigned long cs_mem_base; - int ret; - - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); - - if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - rx51_smc91x_resources[0].start = cs_mem_base + 0x300; - rx51_smc91x_resources[0].end = cs_mem_base + 0x30f; - - smc91x_init_gpmc(SMC91X_CS); - - if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0) - goto free1; - - gpio_direction_input(SMC91X_GPIO_IRQ); - rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ); - - ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown"); - if (ret) - goto free2; - gpio_direction_output(SMC91X_GPIO_PWRDWN, 0); - - ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset"); - if (ret) - goto free3; - gpio_direction_output(SMC91X_GPIO_RESET, 0); - gpio_set_value(SMC91X_GPIO_RESET, 1); - msleep(100); - gpio_set_value(SMC91X_GPIO_RESET, 0); - - return; - -free3: - gpio_free(SMC91X_GPIO_PWRDWN); -free2: - gpio_free(SMC91X_GPIO_IRQ); -free1: - gpmc_cs_free(SMC91X_CS); - - printk(KERN_ERR "Could not initialize smc91x\n"); -} - static struct twl4030_madc_platform_data rx51_madc_data = { .irq_line = 1, }; @@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = { }; /* VAUX3 - adds more power to VIO_18 rail */ -static struct regulator_init_data rx51_vaux3 = { +static struct regulator_init_data rx51_vaux3_cam = { .constraints = { .name = "VCAM_DIG_18", .min_uV = 1800000, @@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = { }, }; +static struct regulator_init_data rx51_vaux3_mmc = { + .constraints = { + .name = "VMMC2_30", + .min_uV = 2800000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &rx51_vmmc2_supply, +}; + static struct regulator_init_data rx51_vaux4 = { .constraints = { .name = "VCAM_ANA_28", @@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = { .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, - .vaux3 = &rx51_vaux3, .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, - .vmmc2 = &rx51_vmmc2, .vsim = &rx51_vsim, .vdac = &rx51_vdac, }; @@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { static int __init rx51_i2c_init(void) { + if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || + system_rev >= SYSTEM_REV_B_USES_VAUX3) + rx51_twldata.vaux3 = &rx51_vaux3_mmc; + else { + rx51_twldata.vaux3 = &rx51_vaux3_cam; + rx51_twldata.vmmc2 = &rx51_vmmc2; + } omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1, ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); omap_register_i2c_bus(2, 100, NULL, 0); @@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void) return 0; } +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +static struct mtd_partition onenand_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x20000, + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 0x60000, + }, + { + .name = "log", + .offset = MTDPART_OFS_APPEND, + .size = 0x40000, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "initfs", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_onenand_platform_data board_onenand_data = { + .cs = 0, + .gpio_irq = 65, + .parts = onenand_partitions, + .nr_parts = ARRAY_SIZE(onenand_partitions), +}; + +static void __init board_onenand_init(void) +{ + gpmc_onenand_init(&board_onenand_data); +} + +#else + +static inline void board_onenand_init(void) +{ +} + +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 54, + .gpio_pwrdwn = 86, + .gpio_reset = 164, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + omap_cfg_reg(U8_34XX_GPIO54_DOWN); + omap_cfg_reg(G25_34XX_GPIO86_OUT); + omap_cfg_reg(H19_34XX_GPIO164_OUT); + + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif void __init rx51_peripherals_init(void) { - platform_add_devices(rx51_peripherals_devices, - ARRAY_SIZE(rx51_peripherals_devices)); rx51_i2c_init(); - rx51_init_smc91x(); + board_onenand_init(); + board_smc91x_init(); } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c new file mode 100644 index 0000000..bac5c43 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * Mikkel Christensen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#define ZOOM2_SMSC911X_CS 7 +#define ZOOM2_SMSC911X_GPIO 158 +#define ZOOM2_QUADUART_CS 3 +#define ZOOM2_QUADUART_GPIO 102 +#define QUART_CLK 1843200 +#define DEBUG_BASE 0x08000000 +#define ZOOM2_ETHR_START DEBUG_BASE + +static struct resource zoom2_smsc911x_resources[] = { + [0] = { + .start = ZOOM2_ETHR_START, + .end = ZOOM2_ETHR_START + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config zoom2_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device zoom2_smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources), + .resource = zoom2_smsc911x_resources, + .dev = { + .platform_data = &zoom2_smsc911x_config, + }, +}; + +static inline void __init zoom2_init_smsc911x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = ZOOM2_SMSC911X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + return; + } + + zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0; + zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff; + + eth_gpio = ZOOM2_SMSC911X_GPIO; + + zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + + if (gpio_request(eth_gpio, "smsc911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", + eth_gpio); + return; + } + gpio_direction_input(eth_gpio); +} + +static struct plat_serial8250_port serial_platform_data[] = { + { + .mapbase = 0x10000000, + .irq = OMAP_GPIO_IRQ(102), + .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = QUART_CLK, + }, { + .flags = 0 + } +}; + +static struct platform_device zoom2_debugboard_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static inline void __init zoom2_init_quaduart(void) +{ + int quart_cs; + unsigned long cs_mem_base; + int quart_gpio = 0; + + quart_cs = ZOOM2_QUADUART_CS; + + if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem" + "for Quad UART(TL16CP754C)\n"); + return; + } + + quart_gpio = ZOOM2_QUADUART_GPIO; + + if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", + quart_gpio); + return; + } + gpio_direction_input(quart_gpio); +} + +static inline int omap_zoom2_debugboard_detect(void) +{ + int debug_board_detect = 0; + + debug_board_detect = ZOOM2_SMSC911X_GPIO; + + if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug" + "board detect\n", debug_board_detect); + return 0; + } + gpio_direction_input(debug_board_detect); + + if (!gpio_get_value(debug_board_detect)) { + gpio_free(debug_board_detect); + return 0; + } + return 1; +} + +static struct platform_device *zoom2_devices[] __initdata = { + &zoom2_smsc911x_device, + &zoom2_debugboard_serial_device, +}; + +int __init omap_zoom2_debugboard_init(void) +{ + if (!omap_zoom2_debugboard_detect()) + return 0; + + zoom2_init_smsc911x(); + zoom2_init_quaduart(); + return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices)); +} diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c new file mode 100644 index 0000000..bcc0f76 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * Mikkel Christensen + * + * Modified from mach-omap2/board-ldp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "mmc-twl4030.h" + +static void __init omap_zoom2_init_irq(void) +{ + omap2_init_common_hw(NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_uart_config zoom2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel zoom2_config[] __initdata = { + { OMAP_TAG_UART, &zoom2_uart_config }, +}; + +static struct twl4030_gpio_platform_data zoom2_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, +}; + +static struct twl4030_platform_data zoom2_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .gpio = &zoom2_gpio_data, +}; + +static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &zoom2_twldata, + }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, + ARRAY_SIZE(zoom2_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static struct twl4030_hsmmc_info mmc[] __initdata = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +extern int __init omap_zoom2_debugboard_init(void); + +static void __init omap_zoom2_init(void) +{ + omap_i2c_init(); + omap_board_config = zoom2_config; + omap_board_config_size = ARRAY_SIZE(zoom2_config); + omap_serial_init(); + omap_zoom2_debugboard_init(); + twl4030_mmc_init(mmc); + usb_musb_init(); +} + +static void __init omap_zoom2_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_zoom2_map_io, + .init_irq = omap_zoom2_init_irq, + .init_machine = omap_zoom2_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 4247a15..ba528f8 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk) return; prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD, - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); + OMAP2_PRCM_CLKCFG_CTRL_OFFSET); /* OCP barrier */ - prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); + prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET); } /* @@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, const struct clksel_rate *clkr; u32 last_div = 0; - printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n", - clk->name, target_rate); + pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", + clk->name, target_rate); *new_div = 1; @@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, /* Sanity check */ if (clkr->div <= last_div) - printk(KERN_ERR "clock: clksel_rate table not sorted " + pr_err("clock: clksel_rate table not sorted " "for clock %s", clk->name); last_div = clkr->div; @@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, } if (!clkr->div) { - printk(KERN_ERR "clock: Could not find divisor for target " + pr_err("clock: Could not find divisor for target " "rate %ld for clock %s parent %s\n", target_rate, clk->name, clk->parent->name); return ~0; @@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, *new_div = clkr->div; - printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div, - (clk->parent->rate / clkr->div)); + pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, + (clk->parent->rate / clkr->div)); return (clk->parent->rate / clkr->div); } @@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == v) return; - printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); + printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name); if (cpu_is_omap34xx()) { omap2_clk_enable(clk); omap2_clk_disable(clk); diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index e4cef33..44de027 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set; static struct clk *vclk; static struct clk *sclk; +static void __iomem *prcm_clksrc_ctrl; + /*------------------------------------------------------------------------- * Omap24xx specific clock functions *-------------------------------------------------------------------------*/ @@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk) { u32 pcc; - pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + pcc = __raw_readl(prcm_clksrc_ctrl); - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, - OMAP24XX_PRCM_CLKSRC_CTRL); + __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); return 0; } @@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk) { u32 pcc; - pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + pcc = __raw_readl(prcm_clksrc_ctrl); - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, - OMAP24XX_PRCM_CLKSRC_CTRL); + __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); } static const struct clkops clkops_oscck = { @@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void) { u32 div; - div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + div = __raw_readl(prcm_clksrc_ctrl); div &= OMAP_SYSCLKDIV_MASK; div >>= OMAP_SYSCLKDIV_SHIFT; @@ -714,15 +714,18 @@ int __init omap2_clk_init(void) struct omap_clk *c; u32 clkrate; - if (cpu_is_omap242x()) + if (cpu_is_omap242x()) { + prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_242X; - else if (cpu_is_omap2430()) + } else if (cpu_is_omap2430()) { + prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_243X; + } clk_init(&omap2_clk_functions); for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 88c5acb..458f00c 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -24,6 +24,17 @@ #include "cm-regbits-24xx.h" #include "sdrc.h" +/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ +#ifdef CONFIG_ARCH_OMAP2420 +#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL +#else +#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL +#endif + static unsigned long omap2_table_mpu_recalc(struct clk *clk); static int omap2_select_table_rate(struct clk *clk, unsigned long rate); static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index ba05aa4..9e43fe5 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "modem_fck", &modem_fck, CK_343X), + CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), + CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), @@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = { #define MAX_DPLL_WAIT_TRIES 1000000 +#define MIN_SDRC_DLL_LOCK_FREQ 83000000 + /** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk @@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) { u32 new_div = 0; + u32 unlock_dll = 0; unsigned long validrate, sdrcrate; struct omap_sdrc_params *sp; @@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (!sp) return -EINVAL; - pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, - validrate); - pr_info("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); + if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { + pr_debug("clock: will unlock SDRC DLL\n"); + unlock_dll = 1; + } + + pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, + validrate); + pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", + sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); /* REVISIT: SRAM code doesn't support other M2 divisors yet */ WARN_ON(new_div != 1 && new_div != 2); /* REVISIT: Add SDRC_MR changing to this code also */ omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div); + sp->actim_ctrlb, new_div, unlock_dll); return 0; } @@ -956,7 +967,7 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) if (c->cpu & cpu_clkflg) { diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 017a30e..e433aec 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -27,6 +27,8 @@ #include "prm.h" #include "prm-regbits-34xx.h" +#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR + static unsigned long omap3_dpll_recalc(struct clk *clk); static unsigned long omap3_clkoutx2_recalc(struct clk *clk); static void omap3_dpll_allow_idle(struct clk *clk); @@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = { .recalc = &followparent_recalc, }; +static struct clk modem_fck = { + .name = "modem_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MODEM_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sad2d_ick = { + .name = "sad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mad2d_ick = { + .name = "mad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430_EN_MAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + static const struct clksel omap343x_gpt_clksel[] = { { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, { .parent = &sys_ck, .rates = gpt_sys_rates }, @@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = { .recalc = &omap2_clksel_recalc, }; -/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */ - /* SECURITY_L4_ICK2 based clocks */ static struct clk security_l4_ick2 = { diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index 281d5da..fe319ae 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = { static struct clockdomain d2d_clkdm = { .name = "d2d_clkdm", .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 6f3f5a3..6923deb 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -145,6 +145,8 @@ #define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits */ +#define OMAP3430_EN_MODEM (1 << 31) +#define OMAP3430_EN_MODEM_SHIFT 31 /* CM_ICLKEN1_CORE specific bits */ #define OMAP3430_EN_ICR (1 << 29) @@ -161,6 +163,8 @@ #define OMAP3430_EN_MAILBOXES_SHIFT 7 #define OMAP3430_EN_OMAPCTRL (1 << 6) #define OMAP3430_EN_OMAPCTRL_SHIFT 6 +#define OMAP3430_EN_SAD2D (1 << 3) +#define OMAP3430_EN_SAD2D_SHIFT 3 #define OMAP3430_EN_SDRC (1 << 1) #define OMAP3430_EN_SDRC_SHIFT 1 @@ -176,6 +180,10 @@ #define OMAP3430_EN_DES1 (1 << 0) #define OMAP3430_EN_DES1_SHIFT 0 +/* CM_ICLKEN3_CORE */ +#define OMAP3430_EN_MAD2D_SHIFT 3 +#define OMAP3430_EN_MAD2D (1 << 3) + /* CM_FCLKEN3_CORE specific bits */ #define OMAP3430ES2_EN_TS_SHIFT 1 #define OMAP3430ES2_EN_TS_MASK (1 << 1) @@ -231,6 +239,8 @@ #define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ +#define OMAP3430_AUTO_MODEM (1 << 31) +#define OMAP3430_AUTO_MODEM_SHIFT 31 #define OMAP3430ES2_AUTO_MMC3 (1 << 30) #define OMAP3430ES2_AUTO_MMC3_SHIFT 30 #define OMAP3430ES2_AUTO_ICR (1 << 29) @@ -287,6 +297,8 @@ #define OMAP3430_AUTO_HSOTGUSB_SHIFT 4 #define OMAP3430ES1_AUTO_D2D (1 << 3) #define OMAP3430ES1_AUTO_D2D_SHIFT 3 +#define OMAP3430_AUTO_SAD2D (1 << 3) +#define OMAP3430_AUTO_SAD2D_SHIFT 3 #define OMAP3430_AUTO_SSI (1 << 0) #define OMAP3430_AUTO_SSI_SHIFT 0 @@ -308,6 +320,8 @@ #define OMAP3430ES2_AUTO_USBTLL (1 << 2) #define OMAP3430ES2_AUTO_USBTLL_SHIFT 2 #define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2) +#define OMAP3430_AUTO_MAD2D_SHIFT 3 +#define OMAP3430_AUTO_MAD2D (1 << 3) /* CM_CLKSEL_CORE */ #define OMAP3430_CLKSEL_SSI_SHIFT 8 diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 65fdf78..1d3c93b 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -16,17 +16,12 @@ #include "prcm-common.h" -#ifndef __ASSEMBLER__ -#define OMAP_CM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg)) -#else #define OMAP2420_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) #define OMAP2430_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) -#endif /* * Architecture-specific global CM registers @@ -38,6 +33,7 @@ #define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) #define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) /* diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c new file mode 100644 index 0000000..2fd22f9 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -0,0 +1,330 @@ +/* + * linux/arch/arm/mach-omap2/gpmc-onenand.c + * + * Copyright (C) 2006 - 2009 Nokia Corporation + * Contacts: Juha Yrjola + * Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include + +#include +#include +#include + +static struct omap_onenand_platform_data *gpmc_onenand_data; + +static struct platform_device gpmc_onenand_device = { + .name = "omap2-onenand", + .id = -1, +}; + +static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) +{ + struct gpmc_timings t; + + const int t_cer = 15; + const int t_avdp = 12; + const int t_aavdh = 7; + const int t_ce = 76; + const int t_aa = 76; + const int t_oe = 20; + const int t_cez = 20; /* max of t_cez, t_oez */ + const int t_ds = 30; + const int t_wpl = 40; + const int t_wph = 30; + + memset(&t, 0, sizeof(t)); + t.sync_clk = 0; + t.cs_on = 0; + t.adv_on = 0; + + /* Read */ + t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer)); + t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh); + t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa); + t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce)); + t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe)); + t.oe_off = t.access + gpmc_round_ns_to_ticks(1); + t.cs_rd_off = t.oe_off; + t.rd_cycle = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez); + + /* Write */ + t.adv_wr_off = t.adv_rd_off; + t.we_on = t.oe_on; + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = t.we_on; + t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds); + } + t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl); + t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); + t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + + /* Configure GPMC for asynchronous read */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, + GPMC_CONFIG1_DEVICESIZE_16 | + GPMC_CONFIG1_MUXADDDATA); + + return gpmc_cs_set_timings(cs, &t); +} + +static void set_onenand_cfg(void __iomem *onenand_base, int latency, + int sync_read, int sync_write, int hf) +{ + u32 reg; + + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); + reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | + ONENAND_SYS_CFG1_BL_16; + if (sync_read) + reg |= ONENAND_SYS_CFG1_SYNC_READ; + else + reg &= ~ONENAND_SYS_CFG1_SYNC_READ; + if (sync_write) + reg |= ONENAND_SYS_CFG1_SYNC_WRITE; + else + reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; + if (hf) + reg |= ONENAND_SYS_CFG1_HF; + else + reg &= ~ONENAND_SYS_CFG1_HF; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); +} + +static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, + void __iomem *onenand_base, + int freq) +{ + struct gpmc_timings t; + const int t_cer = 15; + const int t_avdp = 12; + const int t_cez = 20; /* max of t_cez, t_oez */ + const int t_ds = 30; + const int t_wpl = 40; + const int t_wph = 30; + int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; + int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; + int first_time = 0, hf = 0, sync_read = 0, sync_write = 0; + int err, ticks_cez; + int cs = cfg->cs; + u32 reg; + + if (cfg->flags & ONENAND_SYNC_READ) { + sync_read = 1; + } else if (cfg->flags & ONENAND_SYNC_READWRITE) { + sync_read = 1; + sync_write = 1; + } + + if (!freq) { + /* Very first call freq is not known */ + err = omap2_onenand_set_async_mode(cs, onenand_base); + if (err) + return err; + reg = readw(onenand_base + ONENAND_REG_VERSION_ID); + switch ((reg >> 4) & 0xf) { + case 0: + freq = 40; + break; + case 1: + freq = 54; + break; + case 2: + freq = 66; + break; + case 3: + freq = 83; + break; + case 4: + freq = 104; + break; + default: + freq = 54; + break; + } + first_time = 1; + } + + switch (freq) { + case 83: + min_gpmc_clk_period = 12; /* 83 MHz */ + t_ces = 5; + t_avds = 4; + t_avdh = 2; + t_ach = 6; + t_aavdh = 6; + t_rdyo = 9; + break; + case 66: + min_gpmc_clk_period = 15; /* 66 MHz */ + t_ces = 6; + t_avds = 5; + t_avdh = 2; + t_ach = 6; + t_aavdh = 6; + t_rdyo = 11; + break; + default: + min_gpmc_clk_period = 18; /* 54 MHz */ + t_ces = 7; + t_avds = 7; + t_avdh = 7; + t_ach = 9; + t_aavdh = 7; + t_rdyo = 15; + sync_write = 0; + break; + } + + tick_ns = gpmc_ticks_to_ns(1); + div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); + gpmc_clk_ns = gpmc_ticks_to_ns(div); + if (gpmc_clk_ns < 15) /* >66Mhz */ + hf = 1; + if (hf) + latency = 6; + else if (gpmc_clk_ns >= 25) /* 40 MHz*/ + latency = 3; + else + latency = 4; + + if (first_time) + set_onenand_cfg(onenand_base, latency, + sync_read, sync_write, hf); + + if (div == 1) { + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); + reg |= (1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3); + reg |= (1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4); + reg |= (1 << 7); + reg |= (1 << 23); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); + } else { + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); + reg &= ~(1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3); + reg &= ~(1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4); + reg &= ~(1 << 7); + reg &= ~(1 << 23); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); + } + + /* Set synchronous read timings */ + memset(&t, 0, sizeof(t)); + t.sync_clk = min_gpmc_clk_period; + t.cs_on = 0; + t.adv_on = 0; + fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds)); + fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns); + t.page_burst_access = gpmc_clk_ns; + + /* Read */ + t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh)); + t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach)); + t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div); + t.oe_off = t.access + gpmc_round_ns_to_ticks(1); + t.cs_rd_off = t.oe_off; + ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div; + t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div + + ticks_cez); + + /* Write */ + if (sync_write) { + t.adv_wr_off = t.adv_rd_off; + t.we_on = 0; + t.we_off = t.cs_rd_off; + t.cs_wr_off = t.cs_rd_off; + t.wr_cycle = t.rd_cycle; + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset + + gpmc_ns_to_ticks(min_gpmc_clk_period + + t_rdyo)); + t.wr_access = t.access; + } + } else { + t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int, + t_avdp, t_cer)); + t.we_on = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh); + t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl); + t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); + t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = t.we_on; + t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds); + } + } + + /* Configure GPMC for synchronous read */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, + GPMC_CONFIG1_WRAPBURST_SUPP | + GPMC_CONFIG1_READMULTIPLE_SUPP | + (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) | + (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) | + (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) | + GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) | + GPMC_CONFIG1_PAGE_LEN(2) | + (cpu_is_omap34xx() ? 0 : + (GPMC_CONFIG1_WAIT_READ_MON | + GPMC_CONFIG1_WAIT_PIN_SEL(0))) | + GPMC_CONFIG1_DEVICESIZE_16 | + GPMC_CONFIG1_DEVICETYPE_NOR | + GPMC_CONFIG1_MUXADDDATA); + + err = gpmc_cs_set_timings(cs, &t); + if (err) + return err; + + set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf); + + return 0; +} + +static int gpmc_onenand_setup(void __iomem *onenand_base, int freq) +{ + struct device *dev = &gpmc_onenand_device.dev; + + /* Set sync timings in GPMC */ + if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, + freq) < 0) { + dev_err(dev, "Unable to set synchronous mode\n"); + return -EINVAL; + } + + return 0; +} + +void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) +{ + gpmc_onenand_data = _onenand_data; + gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; + gpmc_onenand_device.dev.platform_data = gpmc_onenand_data; + + if (cpu_is_omap24xx() && + (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { + printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n"); + gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; + gpmc_onenand_data->flags |= ONENAND_SYNC_READ; + } + + if (platform_device_register(&gpmc_onenand_device) < 0) { + printk(KERN_ERR "Unable to register OneNAND device\n"); + return; + } +} diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c new file mode 100644 index 0000000..df99d31 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -0,0 +1,189 @@ +/* + * linux/arch/arm/mach-omap2/gpmc-smc91x.c + * + * Copyright (C) 2009 Nokia Corporation + * Contact: Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct omap_smc91x_platform_data *gpmc_cfg; + +static struct resource gpmc_smc91x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smc91x_platdata gpmc_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, +}; + +static struct platform_device gpmc_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, + .dev = { + .platform_data = &gpmc_smc91x_info, + }, +}; + +/* + * Set the gpmc timings for smc91c96. The timings are taken + * from the data sheet available at: + * http://www.smsc.com/main/catalog/lan91c96.html + * REVISIT: Level shifters can add at least to the access latency. + */ +static int smc91c96_gpmc_retime(void) +{ + struct gpmc_timings t; + const int t3 = 10; /* Figure 12.2 read and 12.4 write */ + const int t4_r = 20; /* Figure 12.2 read */ + const int t4_w = 5; /* Figure 12.4 write */ + const int t5 = 25; /* Figure 12.2 read */ + const int t6 = 15; /* Figure 12.2 read */ + const int t7 = 5; /* Figure 12.4 write */ + const int t8 = 5; /* Figure 12.4 write */ + const int t20 = 185; /* Figure 12.2 read and 12.4 write */ + u32 l; + + memset(&t, 0, sizeof(t)); + + /* Read timings */ + t.cs_on = 0; + t.adv_on = t.cs_on; + t.oe_on = t.adv_on + t3; + t.access = t.oe_on + t5; + t.oe_off = t.access; + t.adv_rd_off = t.oe_off + max(t4_r, t6); + t.cs_rd_off = t.oe_off; + t.rd_cycle = t20 - t.oe_on; + + /* Write timings */ + t.we_on = t.adv_on + t3; + + if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) { + t.wr_data_mux_bus = t.we_on; + t.we_off = t.wr_data_mux_bus + t7; + } else + t.we_off = t.we_on + t7; + if (cpu_is_omap34xx()) + t.wr_access = t.we_off; + t.adv_wr_off = t.we_off + max(t4_w, t8); + t.cs_wr_off = t.we_off + t4_w; + t.wr_cycle = t20 - t.we_on; + + l = GPMC_CONFIG1_DEVICESIZE_16; + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + l |= GPMC_CONFIG1_MUXADDDATA; + if (gpmc_cfg->flags & GPMC_READ_MON) + l |= GPMC_CONFIG1_WAIT_READ_MON; + if (gpmc_cfg->flags & GPMC_WRITE_MON) + l |= GPMC_CONFIG1_WAIT_WRITE_MON; + if (gpmc_cfg->wait_pin) + l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin); + gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l); + + /* + * FIXME: Calculate the address and data bus muxed timings. + * Note that at least adv_rd_off needs to be changed according + * to omap3430 TRM Figure 11-11. Are the sdp boards using the + * FPGA in between smc91x and omap as the timings are different + * from above? + */ + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + return 0; + + return gpmc_cs_set_timings(gpmc_cfg->cs, &t); +} + +/* + * Initialize smc91x device connected to the GPMC. Note that we + * assume that pin multiplexing is done in the board-*.c file, + * or in the bootloader. + */ +void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) +{ + unsigned long cs_mem_base; + int ret; + + gpmc_cfg = board_data; + + if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) + gpmc_cfg->retime = smc91c96_gpmc_retime; + + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + return; + } + + gpmc_smc91x_resources[0].start = cs_mem_base + 0x300; + gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; + gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + + if (gpmc_cfg->retime) { + ret = gpmc_cfg->retime(); + if (ret != 0) + goto free1; + } + + if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0) + goto free1; + + gpio_direction_input(gpmc_cfg->gpio_irq); + gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); + + if (gpmc_cfg->gpio_pwrdwn) { + ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown"); + if (ret) + goto free2; + gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0); + } + + if (gpmc_cfg->gpio_reset) { + ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset"); + if (ret) + goto free3; + + gpio_direction_output(gpmc_cfg->gpio_reset, 0); + gpio_set_value(gpmc_cfg->gpio_reset, 1); + msleep(100); + gpio_set_value(gpmc_cfg->gpio_reset, 0); + } + + if (platform_device_register(&gpmc_smc91x_device) < 0) { + printk(KERN_ERR "Unable to register smc91x device\n"); + gpio_free(gpmc_cfg->gpio_reset); + goto free3; + } + + return; + +free3: + if (gpmc_cfg->gpio_pwrdwn) + gpio_free(gpmc_cfg->gpio_pwrdwn); +free2: + gpio_free(gpmc_cfg->gpio_irq); +free1: + gpmc_cs_free(gpmc_cfg->cs); + + printk(KERN_ERR "Could not initialize smc91x\n"); +} diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2249049..f91934b 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -5,6 +5,9 @@ * * Author: Juha Yrjola * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -424,6 +427,9 @@ void __init gpmc_init(void) } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; + } else if (cpu_is_omap44xx()) { + ck = "gpmc_fck"; + l = OMAP44XX_GPMC_BASE; } gpmc_l3_clk = clk_get(NULL, ck); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 34b5914..458990e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -6,6 +6,9 @@ * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -200,7 +203,10 @@ void __init omap2_check_revision(void) omap24xx_check_revision(); else if (cpu_is_omap34xx()) omap34xx_check_revision(); - else + else if (cpu_is_omap44xx()) { + printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + return; + } else pr_err("OMAP revision unknown, please fix!\n"); /* diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 916fcd3..32afd94 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -4,12 +4,14 @@ * OMAP2 I/O mapping code * * Copyright (C) 2005 Nokia Corporation - * Copyright (C) 2007 Texas Instruments + * Copyright (C) 2007-2009 Texas Instruments * * Author: * Juha Yrjola * Syed Khasim * + * Added OMAP4 support - Santosh Shilimkar + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -30,6 +32,7 @@ #include #include +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" #include @@ -38,7 +41,7 @@ #include #include "clockdomains.h" - +#endif /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. @@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = { }, }; #endif +#ifdef CONFIG_ARCH_OMAP4 +static struct map_desc omap44xx_io_desc[] __initdata = { + { + .virtual = L3_44XX_VIRT, + .pfn = __phys_to_pfn(L3_44XX_PHYS), + .length = L3_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_44XX_VIRT, + .pfn = __phys_to_pfn(L4_44XX_PHYS), + .length = L4_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_WK_44XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_44XX_PHYS), + .length = L4_WK_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_GPMC_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS), + .length = OMAP44XX_GPMC_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER_44XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), + .length = L4_PER_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_EMU_44XX_VIRT, + .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS), + .length = L4_EMU_44XX_SIZE, + .type = MT_DEVICE, + }, +}; +#endif void __init omap2_map_common_io(void) { @@ -183,6 +226,9 @@ void __init omap2_map_common_io(void) iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); #endif +#if defined(CONFIG_ARCH_OMAP4) + iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); +#endif /* Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU * revision check below. @@ -198,9 +244,11 @@ void __init omap2_map_common_io(void) void __init omap2_init_common_hw(struct omap_sdrc_params *sp) { omap2_mux_init(); +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); omap2_sdrc_init(sp); +#endif gpmc_init(); } diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c new file mode 100644 index 0000000..015f22a --- /dev/null +++ b/arch/arm/mach-omap2/iommu2.c @@ -0,0 +1,323 @@ +/* + * omap iommu: omap2/3 architecture specific functions + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU , + * Paul Mundt and Toshihiro Kobayashi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +/* + * omap2 architecture specific register bit definitions + */ +#define IOMMU_ARCH_VERSION 0x00000011 + +/* SYSCONF */ +#define MMU_SYS_IDLE_SHIFT 3 +#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT) + +#define MMU_SYS_SOFTRESET (1 << 1) +#define MMU_SYS_AUTOIDLE 1 + +/* SYSSTATUS */ +#define MMU_SYS_RESETDONE 1 + +/* IRQSTATUS & IRQENABLE */ +#define MMU_IRQ_MULTIHITFAULT (1 << 4) +#define MMU_IRQ_TABLEWALKFAULT (1 << 3) +#define MMU_IRQ_EMUMISS (1 << 2) +#define MMU_IRQ_TRANSLATIONFAULT (1 << 1) +#define MMU_IRQ_TLBMISS (1 << 0) +#define MMU_IRQ_MASK \ + (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \ + MMU_IRQ_TRANSLATIONFAULT) + +/* MMU_CNTL */ +#define MMU_CNTL_SHIFT 1 +#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT) +#define MMU_CNTL_EML_TLB (1 << 3) +#define MMU_CNTL_TWL_EN (1 << 2) +#define MMU_CNTL_MMU_EN (1 << 1) + +#define get_cam_va_mask(pgsz) \ + (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \ + ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \ + ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ + ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) + +static int omap2_iommu_enable(struct iommu *obj) +{ + u32 l, pa; + unsigned long timeout; + + if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) + return -EINVAL; + + pa = virt_to_phys(obj->iopgd); + if (!IS_ALIGNED(pa, SZ_16K)) + return -EINVAL; + + iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG); + + timeout = jiffies + msecs_to_jiffies(20); + do { + l = iommu_read_reg(obj, MMU_SYSSTATUS); + if (l & MMU_SYS_RESETDONE) + break; + } while (time_after(jiffies, timeout)); + + if (!(l & MMU_SYS_RESETDONE)) { + dev_err(obj->dev, "can't take mmu out of reset\n"); + return -ENODEV; + } + + l = iommu_read_reg(obj, MMU_REVISION); + dev_info(obj->dev, "%s: version %d.%d\n", obj->name, + (l >> 4) & 0xf, l & 0xf); + + l = iommu_read_reg(obj, MMU_SYSCONFIG); + l &= ~MMU_SYS_IDLE_MASK; + l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); + iommu_write_reg(obj, l, MMU_SYSCONFIG); + + iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE); + iommu_write_reg(obj, pa, MMU_TTB); + + l = iommu_read_reg(obj, MMU_CNTL); + l &= ~MMU_CNTL_MASK; + l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); + iommu_write_reg(obj, l, MMU_CNTL); + + return 0; +} + +static void omap2_iommu_disable(struct iommu *obj) +{ + u32 l = iommu_read_reg(obj, MMU_CNTL); + + l &= ~MMU_CNTL_MASK; + iommu_write_reg(obj, l, MMU_CNTL); + iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG); + + dev_dbg(obj->dev, "%s is shutting down\n", obj->name); +} + +static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) +{ + int i; + u32 stat, da; + const char *err_msg[] = { + "tlb miss", + "translation fault", + "emulation miss", + "table walk fault", + "multi hit fault", + }; + + stat = iommu_read_reg(obj, MMU_IRQSTATUS); + stat &= MMU_IRQ_MASK; + if (!stat) + return 0; + + da = iommu_read_reg(obj, MMU_FAULT_AD); + *ra = da; + + dev_err(obj->dev, "%s:\tda:%08x ", __func__, da); + + for (i = 0; i < ARRAY_SIZE(err_msg); i++) { + if (stat & (1 << i)) + printk("%s ", err_msg[i]); + } + printk("\n"); + + iommu_write_reg(obj, stat, MMU_IRQSTATUS); + return stat; +} + +static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr) +{ + cr->cam = iommu_read_reg(obj, MMU_READ_CAM); + cr->ram = iommu_read_reg(obj, MMU_READ_RAM); +} + +static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr) +{ + iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); + iommu_write_reg(obj, cr->ram, MMU_RAM); +} + +static u32 omap2_cr_to_virt(struct cr_regs *cr) +{ + u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK; + u32 mask = get_cam_va_mask(cr->cam & page_size); + + return cr->cam & mask; +} + +static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e) +{ + struct cr_regs *cr; + + if (e->da & ~(get_cam_va_mask(e->pgsz))) { + dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__, + e->da); + return ERR_PTR(-EINVAL); + } + + cr = kmalloc(sizeof(*cr), GFP_KERNEL); + if (!cr) + return ERR_PTR(-ENOMEM); + + cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz; + cr->ram = e->pa | e->endian | e->elsz | e->mixed; + + return cr; +} + +static inline int omap2_cr_valid(struct cr_regs *cr) +{ + return cr->cam & MMU_CAM_V; +} + +static u32 omap2_get_pte_attr(struct iotlb_entry *e) +{ + u32 attr; + + attr = e->mixed << 5; + attr |= e->endian; + attr |= e->elsz >> 3; + attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6); + + return attr; +} + +static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf) +{ + char *p = buf; + + /* FIXME: Need more detail analysis of cam/ram */ + p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram); + + return p - buf; +} + +#define pr_reg(name) \ + p += sprintf(p, "%20s: %08x\n", \ + __stringify(name), iommu_read_reg(obj, MMU_##name)); + +static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf) +{ + char *p = buf; + + pr_reg(REVISION); + pr_reg(SYSCONFIG); + pr_reg(SYSSTATUS); + pr_reg(IRQSTATUS); + pr_reg(IRQENABLE); + pr_reg(WALKING_ST); + pr_reg(CNTL); + pr_reg(FAULT_AD); + pr_reg(TTB); + pr_reg(LOCK); + pr_reg(LD_TLB); + pr_reg(CAM); + pr_reg(RAM); + pr_reg(GFLUSH); + pr_reg(FLUSH_ENTRY); + pr_reg(READ_CAM); + pr_reg(READ_RAM); + pr_reg(EMU_FAULT_AD); + + return p - buf; +} + +static void omap2_iommu_save_ctx(struct iommu *obj) +{ + int i; + u32 *p = obj->ctx; + + for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { + p[i] = iommu_read_reg(obj, i * sizeof(u32)); + dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); + } + + BUG_ON(p[0] != IOMMU_ARCH_VERSION); +} + +static void omap2_iommu_restore_ctx(struct iommu *obj) +{ + int i; + u32 *p = obj->ctx; + + for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { + iommu_write_reg(obj, p[i], i * sizeof(u32)); + dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); + } + + BUG_ON(p[0] != IOMMU_ARCH_VERSION); +} + +static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) +{ + e->da = cr->cam & MMU_CAM_VATAG_MASK; + e->pa = cr->ram & MMU_RAM_PADDR_MASK; + e->valid = cr->cam & MMU_CAM_V; + e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK; + e->endian = cr->ram & MMU_RAM_ENDIAN_MASK; + e->elsz = cr->ram & MMU_RAM_ELSZ_MASK; + e->mixed = cr->ram & MMU_RAM_MIXED; +} + +static const struct iommu_functions omap2_iommu_ops = { + .version = IOMMU_ARCH_VERSION, + + .enable = omap2_iommu_enable, + .disable = omap2_iommu_disable, + .fault_isr = omap2_iommu_fault_isr, + + .tlb_read_cr = omap2_tlb_read_cr, + .tlb_load_cr = omap2_tlb_load_cr, + + .cr_to_e = omap2_cr_to_e, + .cr_to_virt = omap2_cr_to_virt, + .alloc_cr = omap2_alloc_cr, + .cr_valid = omap2_cr_valid, + .dump_cr = omap2_dump_cr, + + .get_pte_attr = omap2_get_pte_attr, + + .save_ctx = omap2_iommu_save_ctx, + .restore_ctx = omap2_iommu_restore_ctx, + .dump_ctx = omap2_iommu_dump_ctx, +}; + +static int __init omap2_iommu_init(void) +{ + return install_iommu_arch(&omap2_iommu_ops); +} +module_init(omap2_iommu_init); + +static void __exit omap2_iommu_exit(void) +{ + uninstall_iommu_arch(&omap2_iommu_ops); +} +module_exit(omap2_iommu_exit); + +MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); +MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 998c5c4..b828638 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -28,7 +28,6 @@ #define INTC_MIR_CLEAR0 0x0088 #define INTC_MIR_SET0 0x008c #define INTC_PENDING_IRQ0 0x0098 - /* Number of IRQ state bits in each MIR register */ #define IRQ_BITS_PER_REG 32 @@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, - .disable = omap_mask_irq, }; static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) @@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); } +int omap_irq_pending(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + struct omap_irq_bank *bank = irq_banks + i; + int irq; + + for (irq = 0; irq < bank->nr_irqs; irq += 32) + if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 + + ((irq >> 5) << 5))) + return 1; + } + return 0; +} + void __init omap_init_irq(void) { unsigned long nr_of_irqs = 0; diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index dc40b3e..9756a87 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -16,8 +16,8 @@ #include #include #include -#include -#include +#include +#include #include #include @@ -26,31 +26,9 @@ #include "mmc-twl4030.h" -#if defined(CONFIG_TWL4030_CORE) && \ - (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) -#define LDO_CLR 0x00 -#define VSEL_S2_CLR 0x40 - -#define VMMC1_DEV_GRP 0x27 -#define VMMC1_CLR 0x00 -#define VMMC1_315V 0x03 -#define VMMC1_300V 0x02 -#define VMMC1_285V 0x01 -#define VMMC1_185V 0x00 -#define VMMC1_DEDICATED 0x2A - -#define VMMC2_DEV_GRP 0x2B -#define VMMC2_CLR 0x40 -#define VMMC2_315V 0x0c -#define VMMC2_300V 0x0b -#define VMMC2_285V 0x0a -#define VMMC2_280V 0x09 -#define VMMC2_260V 0x08 -#define VMMC2_185V 0x06 -#define VMMC2_DEDICATED 0x2E - -#define VMMC_DEV_GRP_P1 0x20 +#if defined(CONFIG_REGULATOR) && \ + (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) static u16 control_pbias_offset; static u16 control_devconf1_offset; @@ -59,19 +37,16 @@ static u16 control_devconf1_offset; static struct twl_mmc_controller { struct omap_mmc_platform_data *mmc; - u8 twl_vmmc_dev_grp; - u8 twl_mmc_dedicated; - char name[HSMMC_NAME_LEN + 1]; -} hsmmc[OMAP34XX_NR_MMC] = { - { - .twl_vmmc_dev_grp = VMMC1_DEV_GRP, - .twl_mmc_dedicated = VMMC1_DEDICATED, - }, - { - .twl_vmmc_dev_grp = VMMC2_DEV_GRP, - .twl_mmc_dedicated = VMMC2_DEDICATED, - }, -}; + /* Vcc == configured supply + * Vcc_alt == optional + * - MMC1, supply for DAT4..DAT7 + * - MMC2/MMC2, external level shifter voltage supply, for + * chip (SDIO, eMMC, etc) or transceiver (MMC2 only) + */ + struct regulator *vcc; + struct regulator *vcc_aux; + char name[HSMMC_NAME_LEN + 1]; +} hsmmc[OMAP34XX_NR_MMC]; static int twl_mmc_card_detect(int irq) { @@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev) int ret = 0; int i; - ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd"); - if (ret) - goto done; - ret = gpio_direction_input(mmc->slots[0].switch_pin); - if (ret) - goto err; + /* MMC/SD/SDIO doesn't require a card detect switch */ + if (gpio_is_valid(mmc->slots[0].switch_pin)) { + ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd"); + if (ret) + goto done; + ret = gpio_direction_input(mmc->slots[0].switch_pin); + if (ret) + goto err; + } + /* require at least main regulator */ for (i = 0; i < ARRAY_SIZE(hsmmc); i++) { if (hsmmc[i].name == mmc->slots[0].name) { + struct regulator *reg; + hsmmc[i].mmc = mmc; + + reg = regulator_get(dev, "vmmc"); + if (IS_ERR(reg)) { + dev_dbg(dev, "vmmc regulator missing\n"); + /* HACK: until fixed.c regulator is usable, + * we don't require a main regulator + * for MMC2 or MMC3 + */ + if (i != 0) + break; + ret = PTR_ERR(reg); + goto err; + } + hsmmc[i].vcc = reg; + mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg); + + /* allow an aux regulator */ + reg = regulator_get(dev, "vmmc_aux"); + hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg; + + /* UGLY HACK: workaround regulator framework bugs. + * When the bootloader leaves a supply active, it's + * initialized with zero usecount ... and we can't + * disable it without first enabling it. Until the + * framework is fixed, we need a workaround like this + * (which is safe for MMC, but not in general). + */ + if (regulator_is_enabled(hsmmc[i].vcc) > 0) { + regulator_enable(hsmmc[i].vcc); + regulator_disable(hsmmc[i].vcc); + } + if (hsmmc[i].vcc_aux) { + if (regulator_is_enabled(reg) > 0) { + regulator_enable(reg); + regulator_disable(reg); + } + } + break; } } @@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot) #define twl_mmc_resume NULL #endif -/* - * Sets the MMC voltage in twl4030 - */ - -#define MMC1_OCR (MMC_VDD_165_195 \ - |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) -#define MMC2_OCR (MMC_VDD_165_195 \ - |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \ - |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) - -static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd) -{ - int ret; - u8 vmmc = 0, dev_grp_val; - - if (!vdd) - goto doit; - - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) { - /* VMMC1: max 220 mA. And for 8-bit mode, - * VSIM: max 50 mA - */ - switch (1 << vdd) { - case MMC_VDD_165_195: - vmmc = VMMC1_185V; - /* and VSIM_180V */ - break; - case MMC_VDD_28_29: - vmmc = VMMC1_285V; - /* and VSIM_280V */ - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: - vmmc = VMMC1_300V; - /* and VSIM_300V */ - break; - case MMC_VDD_31_32: - vmmc = VMMC1_315V; - /* error if VSIM needed */ - break; - default: - return -EINVAL; - } - } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) { - /* VMMC2: max 100 mA */ - switch (1 << vdd) { - case MMC_VDD_165_195: - vmmc = VMMC2_185V; - break; - case MMC_VDD_25_26: - case MMC_VDD_26_27: - vmmc = VMMC2_260V; - break; - case MMC_VDD_27_28: - vmmc = VMMC2_280V; - break; - case MMC_VDD_28_29: - vmmc = VMMC2_285V; - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: - vmmc = VMMC2_300V; - break; - case MMC_VDD_31_32: - vmmc = VMMC2_315V; - break; - default: - return -EINVAL; - } - } else { - return -EINVAL; - } - -doit: - if (vdd) - dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */ - else - dev_grp_val = LDO_CLR; /* Power down */ - - ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - dev_grp_val, c->twl_vmmc_dev_grp); - if (ret || !vdd) - return ret; - - ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - vmmc, c->twl_mmc_dedicated); - - return ret; -} - static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, int vdd) { @@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, /* * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the - * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both + * card with Vcc regulator (from twl4030 or whatever). OMAP has both * 1.8V and 3.0V modes, controlled by the PBIAS register. * * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which * is most naturally TWL VSIM; those pins also use PBIAS. + * + * FIXME handle VMMC1A as needed ... */ if (power_on) { if (cpu_is_omap2430()) { @@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, reg &= ~OMAP2_PBIASLITEPWRDNZ0; omap_ctrl_writel(reg, control_pbias_offset); - ret = twl_mmc_set_voltage(c, vdd); + ret = mmc_regulator_set_ocr(c->vcc, vdd); /* 100ms delay required for PBIAS configuration */ msleep(100); @@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, reg &= ~OMAP2_PBIASLITEPWRDNZ0; omap_ctrl_writel(reg, control_pbias_offset); - ret = twl_mmc_set_voltage(c, 0); + ret = mmc_regulator_set_ocr(c->vcc, 0); /* 100ms delay required for PBIAS configuration */ msleep(100); @@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, return ret; } -static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd) +static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd) { - int ret; + int ret = 0; struct twl_mmc_controller *c = &hsmmc[1]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* If we don't see a Vcc regulator, assume it's a fixed + * voltage always-on regulator. + */ + if (!c->vcc) + return 0; + /* - * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP + * Assume Vcc regulator is used only to power the card ... OMAP * VDDS is used to power the pins, optionally with a transceiver to * support cards using voltages other than VDDS (1.8V nominal). When a * transceiver is used, DAT3..7 are muxed as transceiver control pins. + * + * In some cases this regulator won't support enable/disable; + * e.g. it's a fixed rail for a WLAN chip. + * + * In other cases vcc_aux switches interface power. Example, for + * eMMC cards it represents VccQ. Sometimes transceivers or SDIO + * chips/cards need an interface voltage rail too. */ if (power_on) { + /* only MMC2 supports a CLKIN */ if (mmc->slots[0].internal_clock) { u32 reg; @@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd reg |= OMAP2_MMCSDIO2ADPCLKISEL; omap_ctrl_writel(reg, control_devconf1_offset); } - ret = twl_mmc_set_voltage(c, vdd); + ret = mmc_regulator_set_ocr(c->vcc, vdd); + /* enable interface voltage rail, if needed */ + if (ret == 0 && c->vcc_aux) { + ret = regulator_enable(c->vcc_aux); + if (ret < 0) + ret = mmc_regulator_set_ocr(c->vcc, 0); + } } else { - ret = twl_mmc_set_voltage(c, 0); + if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0) + ret = regulator_disable(c->vcc_aux); + if (ret == 0) + ret = mmc_regulator_set_ocr(c->vcc, 0); } return ret; } -static int twl_mmc3_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - /* - * Assume MMC3 has self-powered device connected, for example on-board - * chip with external power source. - */ - return 0; -} - static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) @@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) mmc->slots[0].wires = c->wires; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; + mmc->init = twl_mmc_late_init; - /* note: twl4030 card detect GPIOs normally switch VMMCx ... */ + /* note: twl4030 card detect GPIOs can disable VMMCx ... */ if (gpio_is_valid(c->gpio_cd)) { - mmc->init = twl_mmc_late_init; mmc->cleanup = twl_mmc_cleanup; mmc->suspend = twl_mmc_suspend; mmc->resume = twl_mmc_resume; @@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) } else mmc->slots[0].gpio_wp = -EINVAL; - /* NOTE: we assume OMAP's MMC1 and MMC2 use - * the TWL4030's VMMC1 and VMMC2, respectively; - * and that MMC3 device has it's own power source. + /* NOTE: MMC slots should have a Vcc regulator set up. + * This may be from a TWL4030-family chip, another + * controllable regulator, or a fixed supply. + * + * temporary HACK: ocr_mask instead of fixed supply */ + mmc->slots[0].ocr_mask = c->ocr_mask; switch (c->mmc) { case 1: + /* on-chip level shifting via PBIAS0/PBIAS1 */ mmc->slots[0].set_power = twl_mmc1_set_power; - mmc->slots[0].ocr_mask = MMC1_OCR; break; case 2: - mmc->slots[0].set_power = twl_mmc2_set_power; - if (c->transceiver) - mmc->slots[0].ocr_mask = MMC2_OCR; - else - mmc->slots[0].ocr_mask = MMC_VDD_165_195; - break; + if (c->ext_clock) + c->transceiver = 1; + if (c->transceiver && c->wires > 4) + c->wires = 4; + /* FALLTHROUGH */ case 3: - mmc->slots[0].set_power = twl_mmc3_set_power; - mmc->slots[0].ocr_mask = MMC_VDD_165_195; + /* off-chip level shifting, or none */ + mmc->slots[0].set_power = twl_mmc23_set_power; break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h index ea59e86..3807c45 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.h +++ b/arch/arm/mach-omap2/mmc-twl4030.h @@ -16,9 +16,10 @@ struct twl4030_hsmmc_info { int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ struct device *dev; /* returned: pointer to mmc adapter */ + int ocr_mask; /* temporary HACK */ }; -#if defined(CONFIG_TWL4030_CORE) && \ +#if defined(CONFIG_REGULATOR) && \ (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S new file mode 100644 index 0000000..4afadba --- /dev/null +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -0,0 +1,46 @@ +/* + * Secondary CPU startup routine source file. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar + * + * Interface functions needed for the SMP. This file is based on arm + * realview smp platform. + * Copyright (c) 2003 ARM Limited. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +/* Physical address needed since MMU not enabled yet on secondary core */ +#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804 + + __INIT + +/* + * OMAP4 specific entry point for secondary CPU to jump from ROM + * code. This routine also provides a holding flag into which + * secondary core is held until we're ready for it to initialise. + * The primary core will update the this flag using a hardware + * register AuxCoreBoot1. + */ +ENTRY(omap_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #0x0f +hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1 + ldr r2, [r1] + cmp r2, r0 + bne hold + + /* + * we've been released from the cpu_release,secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c new file mode 100644 index 0000000..8fe8d23 --- /dev/null +++ b/arch/arm/mach-omap2/omap-smp.c @@ -0,0 +1,178 @@ +/* + * OMAP4 SMP source file. It contains platform specific fucntions + * needed for the linux smp kernel. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar + * + * Platform file needed for the OMAP4 SMP. This file is based on arm + * realview smp platform. + * * Copyright (c) 2002 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +/* Registers used for communicating startup information */ +#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800) +#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804) + +/* SCU base address */ +static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE; + +/* + * Use SCU config register to count number of cores + */ +static inline unsigned int get_core_count(void) +{ + if (scu_base) + return scu_get_core_count(scu_base); + return 1; +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * If any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + + gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * Update the AuxCoreBoot1 with boot state for secondary core. + * omap_secondary_startup() routine will hold the secondary core till + * the AuxCoreBoot1 register is updated with cpu state + * A barrier is added to ensure that write buffer is drained + */ + __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1); + smp_wmb(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) + ; + + /* + * Now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return 0; +} + +static void __init wakeup_secondary(void) +{ + /* + * Write the address of secondary startup routine into the + * AuxCoreBoot0 where ROM code will jump and start executing + * on secondary core once out of WFE + * A barrier is added to ensure that write buffer is drained + */ + __raw_writel(virt_to_phys(omap_secondary_startup), \ + OMAP4_AUXCOREBOOT_REG0); + smp_wmb(); + + /* + * Send a 'sev' to wake the secondary core from WFE. + */ + set_event(); + mb(); +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "OMAP4: strange core count of 0? Default to 1\n"); + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "OMAP4: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + /* + * Initialise the SCU and wake up the secondary core using + * wakeup_secondary(). + */ + scu_enable(scu_base); + wakeup_secondary(); + } +} diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c new file mode 100644 index 0000000..194189c --- /dev/null +++ b/arch/arm/mach-omap2/omap3-iommu.c @@ -0,0 +1,105 @@ +/* + * omap iommu: omap3 device registration + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include + +#define OMAP3_MMU1_BASE 0x480bd400 +#define OMAP3_MMU2_BASE 0x5d000000 +#define OMAP3_MMU1_IRQ 24 +#define OMAP3_MMU2_IRQ 28 + + +static unsigned long iommu_base[] __initdata = { + OMAP3_MMU1_BASE, + OMAP3_MMU2_BASE, +}; + +static int iommu_irq[] __initdata = { + OMAP3_MMU1_IRQ, + OMAP3_MMU2_IRQ, +}; + +static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = { + { + .name = "isp", + .nr_tlb_entries = 8, + .clk_name = "cam_ick", + }, +#if defined(CONFIG_MPU_BRIDGE_IOMMU) + { + .name = "iva2", + .nr_tlb_entries = 32, + .clk_name = "iva2_ck", + }, +#endif +}; +#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata) + +static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES]; + +static int __init omap3_iommu_init(void) +{ + int i, err; + + for (i = 0; i < NR_IOMMU_DEVICES; i++) { + struct platform_device *pdev; + struct resource res[2]; + + pdev = platform_device_alloc("omap-iommu", i); + if (!pdev) { + err = -ENOMEM; + goto err_out; + } + + memset(res, 0, sizeof(res)); + res[0].start = iommu_base[i]; + res[0].end = iommu_base[i] + MMU_REG_SIZE - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = res[1].end = iommu_irq[i]; + res[1].flags = IORESOURCE_IRQ; + + err = platform_device_add_resources(pdev, res, + ARRAY_SIZE(res)); + if (err) + goto err_out; + err = platform_device_add_data(pdev, &omap3_iommu_pdata[i], + sizeof(omap3_iommu_pdata[0])); + if (err) + goto err_out; + err = platform_device_add(pdev); + if (err) + goto err_out; + omap3_iommu_pdev[i] = pdev; + } + return 0; + +err_out: + while (i--) + platform_device_put(omap3_iommu_pdev[i]); + return err; +} +module_init(omap3_iommu_init); + +static void __exit omap3_iommu_exit(void) +{ + int i; + + for (i = 0; i < NR_IOMMU_DEVICES; i++) + platform_device_unregister(omap3_iommu_pdev[i]); +} +module_exit(omap3_iommu_exit); + +MODULE_AUTHOR("Hiroshi DOYU"); +MODULE_DESCRIPTION("omap iommu: omap3 device registration"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c new file mode 100644 index 0000000..6cc375a --- /dev/null +++ b/arch/arm/mach-omap2/pm-debug.c @@ -0,0 +1,152 @@ +/* + * OMAP Power Management debug routines + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Copyright (C) 2006-2008 Nokia Corporation + * + * Written by: + * Richard Woodruff + * Tony Lindgren + * Juha Yrjola + * Amit Kucheria + * Igor Stoppa + * Jouni Hogander + * + * Based on pm.c for omap2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "prm.h" +#include "cm.h" +#include "pm.h" + +int omap2_pm_debug; + +#define DUMP_PRM_MOD_REG(mod, reg) \ + regs[reg_count].name = #mod "." #reg; \ + regs[reg_count++].val = prm_read_mod_reg(mod, reg) +#define DUMP_CM_MOD_REG(mod, reg) \ + regs[reg_count].name = #mod "." #reg; \ + regs[reg_count++].val = cm_read_mod_reg(mod, reg) +#define DUMP_PRM_REG(reg) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(reg) +#define DUMP_CM_REG(reg) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(reg) +#define DUMP_INTC_REG(reg, off) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off))) + +void omap2_pm_dump(int mode, int resume, unsigned int us) +{ + struct reg { + const char *name; + u32 val; + } regs[32]; + int reg_count = 0, i; + const char *s1 = NULL, *s2 = NULL; + + if (!resume) { +#if 0 + /* MPU */ + DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET); + DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL); + DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL); + DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST); + DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP); +#endif +#if 0 + /* INTC */ + DUMP_INTC_REG(INTC_MIR0, 0x0084); + DUMP_INTC_REG(INTC_MIR1, 0x00a4); + DUMP_INTC_REG(INTC_MIR2, 0x00c4); +#endif +#if 0 + DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1); + if (cpu_is_omap24xx()) { + DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2); + DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKEMUL_CTRL_OFFSET); + DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKSRC_CTRL_OFFSET); + } + DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN); + DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1); + DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2); + DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN); + DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN); + DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE); + DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST); +#endif +#if 0 + /* DSP */ + if (cpu_is_omap24xx()) { + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST); + } +#endif + } else { + DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1); + if (cpu_is_omap24xx()) + DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2); + DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST); + DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); +#if 1 + DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098); + DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8); + DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8); +#endif + } + + switch (mode) { + case 0: + s1 = "full"; + s2 = "retention"; + break; + case 1: + s1 = "MPU"; + s2 = "retention"; + break; + case 2: + s1 = "MPU"; + s2 = "idle"; + break; + } + + if (!resume) +#ifdef CONFIG_NO_HZ + printk(KERN_INFO + "--- Going to %s %s (next timer after %u ms)\n", s1, s2, + jiffies_to_msecs(get_next_timer_interrupt(jiffies) - + jiffies)); +#else + printk(KERN_INFO "--- Going to %s %s\n", s1, s2); +#endif + else + printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n", + us / 1000, us % 1000); + + for (i = 0; i < reg_count; i++) + printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); +} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c deleted file mode 100644 index ea8ceae..0000000 --- a/arch/arm/mach-omap2/pm.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/pm.c - * - * OMAP2 Power Management Routines - * - * Copyright (C) 2006 Nokia Corporation - * Tony Lindgren - * - * Copyright (C) 2005 Texas Instruments, Inc. - * Richard Woodruff - * - * Based on pm.c for omap1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -static struct clk *vclk; -static void (*omap2_sram_idle)(void); -static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev); -static void (*saved_idle)(void); - -extern void __init pmdomain_init(void); -extern void pmdomain_set_autoidle(void); - -static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE]; - -void omap2_pm_idle(void) -{ - local_irq_disable(); - local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } - - omap2_sram_idle(); - local_fiq_enable(); - local_irq_enable(); -} - -static int omap2_pm_prepare(void) -{ - /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; - return 0; -} - -static int omap2_pm_suspend(void) -{ - return 0; -} - -static int omap2_pm_enter(suspend_state_t state) -{ - int ret = 0; - - switch (state) - { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap2_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static void omap2_pm_finish(void) -{ - pm_idle = saved_idle; -} - -static struct platform_suspend_ops omap_pm_ops = { - .prepare = omap2_pm_prepare, - .enter = omap2_pm_enter, - .finish = omap2_pm_finish, - .valid = suspend_valid_only_mem, -}; - -static int __init omap2_pm_init(void) -{ - return 0; -} - -__initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h new file mode 100644 index 0000000..f7b3baf --- /dev/null +++ b/arch/arm/mach-omap2/pm.h @@ -0,0 +1,38 @@ +/* + * OMAP2/3 Power Management Routines + * + * Copyright (C) 2008 Nokia Corporation + * Jouni Hogander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_PM_H +#define __ARCH_ARM_MACH_OMAP2_PM_H + +extern int omap2_pm_init(void); +extern int omap3_pm_init(void); + +#ifdef CONFIG_PM_DEBUG +extern void omap2_pm_dump(int mode, int resume, unsigned int us); +extern int omap2_pm_debug; +#else +#define omap2_pm_dump(mode, resume, us) do {} while (0); +#define omap2_pm_debug 0 +#endif /* CONFIG_PM_DEBUG */ + +extern void omap24xx_idle_loop_suspend(void); + +extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); +extern void omap34xx_cpu_suspend(u32 *addr, int save_state); +extern void save_secure_ram_context(u32 *addr); + +extern unsigned int omap24xx_idle_loop_suspend_sz; +extern unsigned int omap34xx_suspend_sz; +extern unsigned int save_secure_ram_context_sz; +extern unsigned int omap24xx_cpu_suspend_sz; +extern unsigned int omap34xx_cpu_suspend_sz; + +#endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c new file mode 100644 index 0000000..db10255 --- /dev/null +++ b/arch/arm/mach-omap2/pm24xx.c @@ -0,0 +1,549 @@ +/* + * OMAP2 Power Management Routines + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Copyright (C) 2006-2008 Nokia Corporation + * + * Written by: + * Richard Woodruff + * Tony Lindgren + * Juha Yrjola + * Amit Kucheria + * Igor Stoppa + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "pm.h" + +#include +#include + +static void (*omap2_sram_idle)(void); +static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); + +static struct powerdomain *mpu_pwrdm; +static struct powerdomain *core_pwrdm; + +static struct clockdomain *dsp_clkdm; +static struct clockdomain *gfx_clkdm; + +static struct clk *osc_ck, *emul_ck; + +static int omap2_fclks_active(void) +{ + u32 f1, f2; + + f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + + /* Ignore UART clocks. These are handled by UART core (serial.c) */ + f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2); + f2 &= ~OMAP24XX_EN_UART3; + + if (f1 | f2) + return 1; + return 0; +} + +static void omap2_enter_full_retention(void) +{ + u32 l; + struct timespec ts_preidle, ts_postidle, ts_idle; + + /* There is 1 reference hold for all children of the oscillator + * clock, the following will remove it. If no one else uses the + * oscillator itself it will be disabled if/when we enter retention + * mode. + */ + clk_disable(osc_ck); + + /* Clear old wake-up events */ + /* REVISIT: These write to reserved bits? */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + + /* + * Set MPU powerdomain's next power state to RETENTION; + * preserve logic state during retention + */ + pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + + /* Workaround to kill USB */ + l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL; + omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0); + + omap2_gpio_prepare_for_retention(); + + if (omap2_pm_debug) { + omap2_pm_dump(0, 0, 0); + getnstimeofday(&ts_preidle); + } + + /* One last check for pending IRQs to avoid extra latency due + * to sleeping unnecessarily. */ + if (omap_irq_pending()) + goto no_sleep; + + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + omap_uart_prepare_idle(2); + + /* Jump to SRAM suspend code */ + omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL), + OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL), + OMAP_SDRC_REGADDR(SDRC_POWER)); + + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + +no_sleep: + if (omap2_pm_debug) { + unsigned long long tmp; + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; + omap2_pm_dump(0, 1, tmp); + } + omap2_gpio_resume_after_retention(); + + clk_enable(osc_ck); + + /* clear CORE wake-up events */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + + /* wakeup domain events - bit 1: GPT1, bit5 GPIO */ + prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST); + + /* MPU domain wake events */ + l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + if (l & 0x01) + prm_write_mod_reg(0x01, OCP_MOD, + OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + if (l & 0x20) + prm_write_mod_reg(0x20, OCP_MOD, + OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + + /* Mask future PRCM-to-MPU interrupts */ + prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); +} + +static int omap2_i2c_active(void) +{ + u32 l; + + l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1); +} + +static int sti_console_enabled; + +static int omap2_allow_mpu_retention(void) +{ + u32 l; + + /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ + l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 | + OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 | + OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1)) + return 0; + /* Check for UART3. */ + l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + if (l & OMAP24XX_EN_UART3) + return 0; + if (sti_console_enabled) + return 0; + + return 1; +} + +static void omap2_enter_mpu_retention(void) +{ + int only_idle = 0; + struct timespec ts_preidle, ts_postidle, ts_idle; + + /* Putting MPU into the WFI state while a transfer is active + * seems to cause the I2C block to timeout. Why? Good question. */ + if (omap2_i2c_active()) + return; + + /* The peripherals seem not to be able to wake up the MPU when + * it is in retention mode. */ + if (omap2_allow_mpu_retention()) { + /* REVISIT: These write to reserved bits? */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + + /* Try to enter MPU retention */ + prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) | + OMAP_LOGICRETSTATE, + MPU_MOD, PM_PWSTCTRL); + } else { + /* Block MPU retention */ + + prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL); + only_idle = 1; + } + + if (omap2_pm_debug) { + omap2_pm_dump(only_idle ? 2 : 1, 0, 0); + getnstimeofday(&ts_preidle); + } + + omap2_sram_idle(); + + if (omap2_pm_debug) { + unsigned long long tmp; + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; + omap2_pm_dump(only_idle ? 2 : 1, 1, tmp); + } +} + +static int omap2_can_sleep(void) +{ + if (omap2_fclks_active()) + return 0; + if (osc_ck->usecount > 1) + return 0; + if (omap_dma_running()) + return 0; + + return 1; +} + +static void omap2_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + if (!omap2_can_sleep()) { + if (omap_irq_pending()) + goto out; + omap2_enter_mpu_retention(); + goto out; + } + + if (omap_irq_pending()) + goto out; + + omap2_enter_full_retention(); + +out: + local_fiq_enable(); + local_irq_enable(); +} + +static int omap2_pm_prepare(void) +{ + /* We cannot sleep in idle until we have resumed */ + disable_hlt(); + return 0; +} + +static int omap2_pm_suspend(void) +{ + u32 wken_wkup, mir1; + + wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN); + prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN); + + /* Mask GPT1 */ + mir1 = omap_readl(0x480fe0a4); + omap_writel(1 << 5, 0x480fe0ac); + + omap_uart_prepare_suspend(); + omap2_enter_full_retention(); + + omap_writel(mir1, 0x480fe0a4); + prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); + + return 0; +} + +static int omap2_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap2_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap2_pm_finish(void) +{ + enable_hlt(); +} + +static struct platform_suspend_ops omap_pm_ops = { + .prepare = omap2_pm_prepare, + .enter = omap2_pm_enter, + .finish = omap2_pm_finish, + .valid = suspend_valid_only_mem, +}; + +static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm) +{ + omap2_clkdm_allow_idle(clkdm); + return 0; +} + +static void __init prcm_setup_regs(void) +{ + int i, num_mem_banks; + struct powerdomain *pwrdm; + + /* Enable autoidle */ + prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD, + OMAP2_PRCM_SYSCONFIG_OFFSET); + + /* Set all domain wakeup dependencies */ + prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP); + prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); + prm_write_mod_reg(0, CORE_MOD, PM_WKDEP); + if (cpu_is_omap2430()) + prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP); + + /* + * Set CORE powerdomain memory banks to retain their contents + * during RETENTION + */ + num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm); + for (i = 0; i < num_mem_banks; i++) + pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET); + + /* Set CORE powerdomain's next power state to RETENTION */ + pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET); + + /* + * Set MPU powerdomain's next power state to RETENTION; + * preserve logic state during retention + */ + pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + + /* Force-power down DSP, GFX powerdomains */ + + pwrdm = clkdm_get_pwrdm(dsp_clkdm); + pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); + omap2_clkdm_sleep(dsp_clkdm); + + pwrdm = clkdm_get_pwrdm(gfx_clkdm); + pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); + omap2_clkdm_sleep(gfx_clkdm); + + /* Enable clockdomain hardware-supervised control for all clkdms */ + clkdm_for_each(_pm_clkdm_enable_hwsup); + + /* Enable clock autoidle for all domains */ + cm_write_mod_reg(OMAP24XX_AUTO_CAM | + OMAP24XX_AUTO_MAILBOXES | + OMAP24XX_AUTO_WDT4 | + OMAP2420_AUTO_WDT3 | + OMAP24XX_AUTO_MSPRO | + OMAP2420_AUTO_MMC | + OMAP24XX_AUTO_FAC | + OMAP2420_AUTO_EAC | + OMAP24XX_AUTO_HDQ | + OMAP24XX_AUTO_UART2 | + OMAP24XX_AUTO_UART1 | + OMAP24XX_AUTO_I2C2 | + OMAP24XX_AUTO_I2C1 | + OMAP24XX_AUTO_MCSPI2 | + OMAP24XX_AUTO_MCSPI1 | + OMAP24XX_AUTO_MCBSP2 | + OMAP24XX_AUTO_MCBSP1 | + OMAP24XX_AUTO_GPT12 | + OMAP24XX_AUTO_GPT11 | + OMAP24XX_AUTO_GPT10 | + OMAP24XX_AUTO_GPT9 | + OMAP24XX_AUTO_GPT8 | + OMAP24XX_AUTO_GPT7 | + OMAP24XX_AUTO_GPT6 | + OMAP24XX_AUTO_GPT5 | + OMAP24XX_AUTO_GPT4 | + OMAP24XX_AUTO_GPT3 | + OMAP24XX_AUTO_GPT2 | + OMAP2420_AUTO_VLYNQ | + OMAP24XX_AUTO_DSS, + CORE_MOD, CM_AUTOIDLE1); + cm_write_mod_reg(OMAP24XX_AUTO_UART3 | + OMAP24XX_AUTO_SSI | + OMAP24XX_AUTO_USB, + CORE_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(OMAP24XX_AUTO_SDRC | + OMAP24XX_AUTO_GPMC | + OMAP24XX_AUTO_SDMA, + CORE_MOD, CM_AUTOIDLE3); + cm_write_mod_reg(OMAP24XX_AUTO_PKA | + OMAP24XX_AUTO_AES | + OMAP24XX_AUTO_RNG | + OMAP24XX_AUTO_SHA | + OMAP24XX_AUTO_DES, + CORE_MOD, OMAP24XX_CM_AUTOIDLE4); + + cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE); + + /* Put DPLL and both APLLs into autoidle mode */ + cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) | + (0x03 << OMAP24XX_AUTO_96M_SHIFT) | + (0x03 << OMAP24XX_AUTO_54M_SHIFT), + PLL_MOD, CM_AUTOIDLE); + + cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL | + OMAP24XX_AUTO_WDT1 | + OMAP24XX_AUTO_MPU_WDT | + OMAP24XX_AUTO_GPIOS | + OMAP24XX_AUTO_32KSYNC | + OMAP24XX_AUTO_GPT1, + WKUP_MOD, CM_AUTOIDLE); + + /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk + * stabilisation */ + prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKSSETUP_OFFSET); + + /* Configure automatic voltage transition */ + prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, + OMAP2_PRCM_VOLTSETUP_OFFSET); + prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT | + (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) | + OMAP24XX_MEMRETCTRL | + (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) | + (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT), + OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET); + + /* Enable wake-up events */ + prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1, + WKUP_MOD, PM_WKEN); +} + +int __init omap2_pm_init(void) +{ + u32 l; + + if (!cpu_is_omap24xx()) + return -ENODEV; + + printk(KERN_INFO "Power Management for OMAP2 initializing\n"); + l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET); + printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); + + /* Look up important powerdomains, clockdomains */ + + mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); + if (!mpu_pwrdm) + pr_err("PM: mpu_pwrdm not found\n"); + + core_pwrdm = pwrdm_lookup("core_pwrdm"); + if (!core_pwrdm) + pr_err("PM: core_pwrdm not found\n"); + + dsp_clkdm = clkdm_lookup("dsp_clkdm"); + if (!dsp_clkdm) + pr_err("PM: mpu_clkdm not found\n"); + + gfx_clkdm = clkdm_lookup("gfx_clkdm"); + if (!gfx_clkdm) + pr_err("PM: gfx_clkdm not found\n"); + + + osc_ck = clk_get(NULL, "osc_ck"); + if (IS_ERR(osc_ck)) { + printk(KERN_ERR "could not get osc_ck\n"); + return -ENODEV; + } + + if (cpu_is_omap242x()) { + emul_ck = clk_get(NULL, "emul_ck"); + if (IS_ERR(emul_ck)) { + printk(KERN_ERR "could not get emul_ck\n"); + clk_put(osc_ck); + return -ENODEV; + } + } + + prcm_setup_regs(); + + /* Hack to prevent MPU retention when STI console is enabled. */ + { + const struct omap_sti_console_config *sti; + + sti = omap_get_config(OMAP_TAG_STI_CONSOLE, + struct omap_sti_console_config); + if (sti != NULL && sti->enable) + sti_console_enabled = 1; + } + + /* + * We copy the assembler sleep/wakeup routines to SRAM. + * These routines need to be in SRAM as that's the only + * memory the MPU can see when it wakes up. + */ + if (cpu_is_omap24xx()) { + omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend, + omap24xx_idle_loop_suspend_sz); + + omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend, + omap24xx_cpu_suspend_sz); + } + + suspend_set_ops(&omap_pm_ops); + pm_idle = omap2_pm_idle; + + return 0; +} + +late_initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c new file mode 100644 index 0000000..841d4c5 --- /dev/null +++ b/arch/arm/mach-omap2/pm34xx.c @@ -0,0 +1,710 @@ +/* + * OMAP3 Power Management Routines + * + * Copyright (C) 2006-2008 Nokia Corporation + * Tony Lindgren + * Jouni Hogander + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm-regbits-34xx.h" + +#include "prm.h" +#include "pm.h" + +struct power_state { + struct powerdomain *pwrdm; + u32 next_state; + u32 saved_state; + struct list_head node; +}; + +static LIST_HEAD(pwrst_list); + +static void (*_omap_sram_idle)(u32 *addr, int save_state); + +static struct powerdomain *mpu_pwrdm; + +/* PRCM Interrupt Handler for wakeups */ +static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +{ + u32 wkst, irqstatus_mpu; + u32 fclk, iclk; + + /* WKUP */ + wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); + fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); + cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN); + cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN); + prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST); + while (prm_read_mod_reg(WKUP_MOD, PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN); + cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN); + } + + /* CORE */ + wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1); + if (wkst) { + iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); + fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1); + prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1); + while (prm_read_mod_reg(CORE_MOD, PM_WKST1)) + cpu_relax(); + cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1); + cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1); + } + wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3); + if (wkst) { + iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); + fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3); + cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3); + while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3)) + cpu_relax(); + cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3); + cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + } + + /* PER */ + wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); + fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN); + prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST); + while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN); + cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN); + } + + if (omap_rev() > OMAP3430_REV_ES1_0) { + /* USBHOST */ + wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD, + PM_WKST); + while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + } + } + + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + prm_write_mod_reg(irqstatus_mpu, OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)) + cpu_relax(); + + return IRQ_HANDLED; +} + +static void omap_sram_idle(void) +{ + /* Variable to tell what needs to be saved and restored + * in omap_sram_idle*/ + /* save_state = 0 => Nothing to save and restored */ + /* save_state = 1 => Only L1 and logic lost */ + /* save_state = 2 => Only L2 lost */ + /* save_state = 3 => L1, L2 and logic lost */ + int save_state = 0, mpu_next_state; + + if (!_omap_sram_idle) + return; + + mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); + switch (mpu_next_state) { + case PWRDM_POWER_RET: + /* No need to save context */ + save_state = 0; + break; + default: + /* Invalid state */ + printk(KERN_ERR "Invalid mpu state in sram_idle\n"); + return; + } + omap2_gpio_prepare_for_retention(); + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + omap_uart_prepare_idle(2); + + _omap_sram_idle(NULL, save_state); + cpu_init(); + + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + omap2_gpio_resume_after_retention(); +} + +/* + * Check if functional clocks are enabled before entering + * sleep. This function could be behind CONFIG_PM_DEBUG + * when all drivers are configuring their sysconfig registers + * properly and using their clocks properly. + */ +static int omap3_fclks_active(void) +{ + u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0, + fck_cam = 0, fck_per = 0, fck_usbhost = 0; + + fck_core1 = cm_read_mod_reg(CORE_MOD, + CM_FCLKEN1); + if (omap_rev() > OMAP3430_REV_ES1_0) { + fck_core3 = cm_read_mod_reg(CORE_MOD, + OMAP3430ES2_CM_FCLKEN3); + fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD, + CM_FCLKEN); + fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + } else + fck_sgx = cm_read_mod_reg(GFX_MOD, + OMAP3430ES2_CM_FCLKEN3); + fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD, + CM_FCLKEN); + fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD, + CM_FCLKEN); + fck_per = cm_read_mod_reg(OMAP3430_PER_MOD, + CM_FCLKEN); + + /* Ignore UART clocks. These are handled by UART core (serial.c) */ + fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2); + fck_per &= ~OMAP3430_EN_UART3; + + if (fck_core1 | fck_core3 | fck_sgx | fck_dss | + fck_cam | fck_per | fck_usbhost) + return 1; + return 0; +} + +static int omap3_can_sleep(void) +{ + if (!omap_uart_can_sleep()) + return 0; + if (omap3_fclks_active()) + return 0; + return 1; +} + +/* This sets pwrdm state (other than mpu & core. Currently only ON & + * RET are supported. Function is assuming that clkdm doesn't have + * hw_sup mode enabled. */ +static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +{ + u32 cur_state; + int sleep_switch = 0; + int ret = 0; + + if (pwrdm == NULL || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << state))) { + if (state == PWRDM_POWER_OFF) + return ret; + state--; + } + + cur_state = pwrdm_read_next_pwrst(pwrdm); + if (cur_state == state) + return ret; + + if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { + omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); + sleep_switch = 1; + pwrdm_wait_transition(pwrdm); + } + + ret = pwrdm_set_next_pwrst(pwrdm, state); + if (ret) { + printk(KERN_ERR "Unable to set state of powerdomain: %s\n", + pwrdm->name); + goto err; + } + + if (sleep_switch) { + omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); + pwrdm_wait_transition(pwrdm); + } + +err: + return ret; +} + +static void omap3_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + if (!omap3_can_sleep()) + goto out; + + if (omap_irq_pending()) + goto out; + + omap_sram_idle(); + +out: + local_fiq_enable(); + local_irq_enable(); +} + +static int omap3_pm_prepare(void) +{ + disable_hlt(); + return 0; +} + +static int omap3_pm_suspend(void) +{ + struct power_state *pwrst; + int state, ret = 0; + + /* Read current next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) + pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); + /* Set ones wanted by suspend */ + list_for_each_entry(pwrst, &pwrst_list, node) { + if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) + goto restore; + if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm)) + goto restore; + } + + omap_uart_prepare_suspend(); + omap_sram_idle(); + +restore: + /* Restore next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) { + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + state = pwrdm_read_prev_pwrst(pwrst->pwrdm); + if (state > pwrst->next_state) { + printk(KERN_INFO "Powerdomain (%s) didn't enter " + "target state %d\n", + pwrst->pwrdm->name, pwrst->next_state); + ret = -1; + } + } + if (ret) + printk(KERN_ERR "Could not enter target state in pm_suspend\n"); + else + printk(KERN_INFO "Successfully put all powerdomains " + "to target state\n"); + + return ret; +} + +static int omap3_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap3_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap3_pm_finish(void) +{ + enable_hlt(); +} + +static struct platform_suspend_ops omap_pm_ops = { + .prepare = omap3_pm_prepare, + .enter = omap3_pm_enter, + .finish = omap3_pm_finish, + .valid = suspend_valid_only_mem, +}; + + +/** + * omap3_iva_idle(): ensure IVA is in idle so it can be put into + * retention + * + * In cases where IVA2 is activated by bootcode, it may prevent + * full-chip retention or off-mode because it is not idle. This + * function forces the IVA2 into idle state so it can go + * into retention/off and thus allow full-chip retention/off. + * + **/ +static void __init omap3_iva_idle(void) +{ + /* ensure IVA2 clock is disabled */ + cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* if no clock activity, nothing else to do */ + if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) & + OMAP3430_CLKACTIVITY_IVA2_MASK)) + return; + + /* Reset IVA2 */ + prm_write_mod_reg(OMAP3430_RST1_IVA2 | + OMAP3430_RST2_IVA2 | + OMAP3430_RST3_IVA2, + OMAP3430_IVA2_MOD, RM_RSTCTRL); + + /* Enable IVA2 clock */ + cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2, + OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Set IVA2 boot mode to 'idle' */ + omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, + OMAP343X_CONTROL_IVA2_BOOTMOD); + + /* Un-reset IVA2 */ + prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL); + + /* Disable IVA2 clock */ + cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Reset IVA2 */ + prm_write_mod_reg(OMAP3430_RST1_IVA2 | + OMAP3430_RST2_IVA2 | + OMAP3430_RST3_IVA2, + OMAP3430_IVA2_MOD, RM_RSTCTRL); +} + +static void __init omap3_d2d_idle(void) +{ + u16 mask, padconf; + + /* In a stand alone OMAP3430 where there is not a stacked + * modem for the D2D Idle Ack and D2D MStandby must be pulled + * high. S CONTROL_PADCONF_SAD2D_IDLEACK and + * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */ + mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); + + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); + + /* reset modem */ + prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON | + OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST, + CORE_MOD, RM_RSTCTRL); + prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL); +} + +static void __init prcm_setup_regs(void) +{ + /* XXX Reset all wkdeps. This should be done when initializing + * powerdomains */ + prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); + prm_write_mod_reg(0, MPU_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP); + if (omap_rev() > OMAP3430_REV_ES1_0) { + prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP); + } else + prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); + + /* + * Enable interface clock autoidle for all modules. + * Note that in the long run this should be done by clockfw + */ + cm_write_mod_reg( + OMAP3430_AUTO_MODEM | + OMAP3430ES2_AUTO_MMC3 | + OMAP3430ES2_AUTO_ICR | + OMAP3430_AUTO_AES2 | + OMAP3430_AUTO_SHA12 | + OMAP3430_AUTO_DES2 | + OMAP3430_AUTO_MMC2 | + OMAP3430_AUTO_MMC1 | + OMAP3430_AUTO_MSPRO | + OMAP3430_AUTO_HDQ | + OMAP3430_AUTO_MCSPI4 | + OMAP3430_AUTO_MCSPI3 | + OMAP3430_AUTO_MCSPI2 | + OMAP3430_AUTO_MCSPI1 | + OMAP3430_AUTO_I2C3 | + OMAP3430_AUTO_I2C2 | + OMAP3430_AUTO_I2C1 | + OMAP3430_AUTO_UART2 | + OMAP3430_AUTO_UART1 | + OMAP3430_AUTO_GPT11 | + OMAP3430_AUTO_GPT10 | + OMAP3430_AUTO_MCBSP5 | + OMAP3430_AUTO_MCBSP1 | + OMAP3430ES1_AUTO_FAC | /* This is es1 only */ + OMAP3430_AUTO_MAILBOXES | + OMAP3430_AUTO_OMAPCTRL | + OMAP3430ES1_AUTO_FSHOSTUSB | + OMAP3430_AUTO_HSOTGUSB | + OMAP3430_AUTO_SAD2D | + OMAP3430_AUTO_SSI, + CORE_MOD, CM_AUTOIDLE1); + + cm_write_mod_reg( + OMAP3430_AUTO_PKA | + OMAP3430_AUTO_AES1 | + OMAP3430_AUTO_RNG | + OMAP3430_AUTO_SHA11 | + OMAP3430_AUTO_DES1, + CORE_MOD, CM_AUTOIDLE2); + + if (omap_rev() > OMAP3430_REV_ES1_0) { + cm_write_mod_reg( + OMAP3430_AUTO_MAD2D | + OMAP3430ES2_AUTO_USBTLL, + CORE_MOD, CM_AUTOIDLE3); + } + + cm_write_mod_reg( + OMAP3430_AUTO_WDT2 | + OMAP3430_AUTO_WDT1 | + OMAP3430_AUTO_GPIO1 | + OMAP3430_AUTO_32KSYNC | + OMAP3430_AUTO_GPT12 | + OMAP3430_AUTO_GPT1 , + WKUP_MOD, CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_DSS, + OMAP3430_DSS_MOD, + CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_CAM, + OMAP3430_CAM_MOD, + CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_GPIO6 | + OMAP3430_AUTO_GPIO5 | + OMAP3430_AUTO_GPIO4 | + OMAP3430_AUTO_GPIO3 | + OMAP3430_AUTO_GPIO2 | + OMAP3430_AUTO_WDT3 | + OMAP3430_AUTO_UART3 | + OMAP3430_AUTO_GPT9 | + OMAP3430_AUTO_GPT8 | + OMAP3430_AUTO_GPT7 | + OMAP3430_AUTO_GPT6 | + OMAP3430_AUTO_GPT5 | + OMAP3430_AUTO_GPT4 | + OMAP3430_AUTO_GPT3 | + OMAP3430_AUTO_GPT2 | + OMAP3430_AUTO_MCBSP4 | + OMAP3430_AUTO_MCBSP3 | + OMAP3430_AUTO_MCBSP2, + OMAP3430_PER_MOD, + CM_AUTOIDLE); + + if (omap_rev() > OMAP3430_REV_ES1_0) { + cm_write_mod_reg( + OMAP3430ES2_AUTO_USBHOST, + OMAP3430ES2_USBHOST_MOD, + CM_AUTOIDLE); + } + + /* + * Set all plls to autoidle. This is needed until autoidle is + * enabled by clockfw + */ + cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT, + OMAP3430_IVA2_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT, + MPU_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) | + (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT), + PLL_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT, + PLL_MOD, + CM_AUTOIDLE2); + + /* + * Enable control of expternal oscillator through + * sys_clkreq. In the long run clock framework should + * take care of this. + */ + prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, + 1 << OMAP_AUTOEXTCLKMODE_SHIFT, + OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + + /* setup wakup source */ + prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 | + OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12, + WKUP_MOD, PM_WKEN); + /* No need to write EN_IO, that is always enabled */ + prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 | + OMAP3430_EN_GPT12, + WKUP_MOD, OMAP3430_PM_MPUGRPSEL); + /* For some reason IO doesn't generate wakeup event even if + * it is selected to mpu wakeup goup */ + prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, + OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + omap3_iva_idle(); + omap3_d2d_idle(); +} + +static int __init pwrdms_setup(struct powerdomain *pwrdm) +{ + struct power_state *pwrst; + + if (!pwrdm->pwrsts) + return 0; + + pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL); + if (!pwrst) + return -ENOMEM; + pwrst->pwrdm = pwrdm; + pwrst->next_state = PWRDM_POWER_RET; + list_add(&pwrst->node, &pwrst_list); + + if (pwrdm_has_hdwr_sar(pwrdm)) + pwrdm_enable_hdwr_sar(pwrdm); + + return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); +} + +/* + * Enable hw supervised mode for all clockdomains if it's + * supported. Initiate sleep transition for other clockdomains, if + * they are not used + */ +static int __init clkdms_setup(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) + omap2_clkdm_allow_idle(clkdm); + else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && + atomic_read(&clkdm->usecount) == 0) + omap2_clkdm_sleep(clkdm); + return 0; +} + +int __init omap3_pm_init(void) +{ + struct power_state *pwrst, *tmp; + int ret; + + if (!cpu_is_omap34xx()) + return -ENODEV; + + printk(KERN_ERR "Power Management for TI OMAP3.\n"); + + /* XXX prcm_setup_regs needs to be before enabling hw + * supervised mode for powerdomains */ + prcm_setup_regs(); + + ret = request_irq(INT_34XX_PRCM_MPU_IRQ, + (irq_handler_t)prcm_interrupt_handler, + IRQF_DISABLED, "prcm", NULL); + if (ret) { + printk(KERN_ERR "request_irq failed to register for 0x%x\n", + INT_34XX_PRCM_MPU_IRQ); + goto err1; + } + + ret = pwrdm_for_each(pwrdms_setup); + if (ret) { + printk(KERN_ERR "Failed to setup powerdomains\n"); + goto err2; + } + + (void) clkdm_for_each(clkdms_setup); + + mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); + if (mpu_pwrdm == NULL) { + printk(KERN_ERR "Failed to get mpu_pwrdm\n"); + goto err2; + } + + _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, + omap34xx_cpu_suspend_sz); + + suspend_set_ops(&omap_pm_ops); + + pm_idle = omap3_pm_idle; + +err1: + return ret; +err2: + free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { + list_del(&pwrst->node); + kfree(pwrst); + } + return ret; +} + +late_initcall(omap3_pm_init); diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 812d50e..cb1ae84 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -276,6 +276,8 @@ /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP3430_EN_GPIO1 (1 << 3) #define OMAP3430_EN_GPIO1_SHIFT 3 +#define OMAP3430_EN_GPT12 (1 << 1) +#define OMAP3430_EN_GPT12_SHIFT 1 #define OMAP3430_EN_GPT1 (1 << 0) #define OMAP3430_EN_GPT1_SHIFT 0 diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 826d326..9937e28 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -16,17 +16,12 @@ #include "prcm-common.h" -#ifndef __ASSEMBLER__ -#define OMAP_PRM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg)) -#else #define OMAP2420_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) #define OMAP2430_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) -#endif /* * Architecture-specific global PRM registers @@ -38,80 +33,132 @@ * */ -/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */ -#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050 -#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080 - -/* 242x GR_MOD registers, use these only for assembly code */ -#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_VOLTCTRL_OFFSET) -#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET) - -/* 243x GR_MOD registers, use these only for assembly code */ -#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_VOLTCTRL_OFFSET) -#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET) - -/* These will disappear */ -#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000) -#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010) - -#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c) - -#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054) -#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060) -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070) -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0078) -#define OMAP24XX_PRCM_CLKCFG_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0080) -#define OMAP24XX_PRCM_CLKCFG_STATUS OMAP_PRM_REGADDR(OCP_MOD, 0x0084) -#define OMAP24XX_PRCM_VOLTSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0090) -#define OMAP24XX_PRCM_CLKSSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0094) -#define OMAP24XX_PRCM_POLCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0098) - -#define OMAP3430_PRM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0004) -#define OMAP3430_PRM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0014) - -#define OMAP3430_PRM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP3430_PRM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c) - - -#define OMAP3430_PRM_VC_SMPS_SA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) -#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) -#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) -#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) -#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) -#define OMAP3430_PRM_VC_CH_CONF OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) -#define OMAP3430_PRM_VC_I2C_CFG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) -#define OMAP3430_PRM_VC_BYPASS_VAL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) -#define OMAP3430_PRM_RSTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) -#define OMAP3430_PRM_RSTTIME OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) -#define OMAP3430_PRM_RSTST OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) -#define OMAP3430_PRM_VOLTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) -#define OMAP3430_PRM_SRAM_PCHARGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) -#define OMAP3430_PRM_CLKSRC_CTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) -#define OMAP3430_PRM_VOLTSETUP1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) -#define OMAP3430_PRM_VOLTOFFSET OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) -#define OMAP3430_PRM_CLKSETUP OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) -#define OMAP3430_PRM_POLCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) -#define OMAP3430_PRM_VOLTSETUP2 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) -#define OMAP3430_PRM_VP1_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) -#define OMAP3430_PRM_VP1_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) -#define OMAP3430_PRM_VP1_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) -#define OMAP3430_PRM_VP1_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) -#define OMAP3430_PRM_VP1_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) -#define OMAP3430_PRM_VP1_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) -#define OMAP3430_PRM_VP2_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) -#define OMAP3430_PRM_VP2_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) -#define OMAP3430_PRM_VP2_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) -#define OMAP3430_PRM_VP2_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) -#define OMAP3430_PRM_VP2_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) -#define OMAP3430_PRM_VP2_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) - -#define OMAP3430_PRM_CLKSEL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) -#define OMAP3430_PRM_CLKOUT_CTRL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) +#define OMAP2_PRCM_REVISION_OFFSET 0x0000 +#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 +#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 +#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2_PRCM_VOLTST_OFFSET 0x0054 +#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 +#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078 +#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080 +#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 +#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 +#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 +#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 +#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP3_PRM_REVISION_OFFSET 0x0004 +#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004) +#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014 +#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014) + +#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c) + + +#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020 +#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) +#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024 +#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) +#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028 +#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) +#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c +#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) +#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030 +#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) +#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034 +#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) +#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038 +#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) +#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c +#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) +#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050 +#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) +#define OMAP3_PRM_RSTTIME_OFFSET 0x0054 +#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) +#define OMAP3_PRM_RSTST_OFFSET 0x0058 +#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) +#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060 +#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) +#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064 +#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) +#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) +#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090 +#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) +#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094 +#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) +#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098 +#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) +#define OMAP3_PRM_POLCTRL_OFFSET 0x009c +#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) +#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0 +#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) +#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0 +#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) +#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4 +#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) +#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8 +#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) +#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc +#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) +#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0 +#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) +#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4 +#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) +#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0 +#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) +#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4 +#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) +#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8 +#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) +#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc +#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) +#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0 +#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) +#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4 +#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) + +#define OMAP3_PRM_CLKSEL_OFFSET 0x0040 +#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) +#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) /* * Module specific PRM registers from PRM_BASE + domain offset @@ -156,9 +203,11 @@ #define OMAP3430_PM_MPUGRPSEL 0x00a4 #define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL +#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8 #define OMAP3430_PM_IVAGRPSEL 0x00a8 #define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL +#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4 #define OMAP3430_PM_PREPWSTST 0x00e8 diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h new file mode 100644 index 0000000..02e1c2d --- /dev/null +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -0,0 +1,55 @@ +/* + * SDRC register values for the Micron MT46H32M32LF-6 + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF +#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF + +#include + +/* Micron MT46H32M32LF-6 */ +/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ +static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = { + [0] = { + .rate = 166000000, + .actim_ctrla = 0x9a9db4c6, + .actim_ctrlb = 0x00011217, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [1] = { + .rate = 165941176, + .actim_ctrla = 0x9a9db4c6, + .actim_ctrlb = 0x00011217, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 83000000, + .actim_ctrla = 0x51512283, + .actim_ctrlb = 0x0001120c, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [3] = { + .rate = 82970588, + .actim_ctrla = 0x51512283, + .actim_ctrlb = 0x0001120c, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [4] = { + .rate = 0 + }, +}; + +#endif diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h new file mode 100644 index 0000000..3751d29 --- /dev/null +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -0,0 +1,54 @@ +/* + * SDRC register values for the Qimonda HYB18M512160AF-6 + * + * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 +#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 + +#include + +/* Qimonda HYB18M512160AF-6 */ +static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { + [0] = { + .rate = 166000000, + .actim_ctrla = 0x629db4c6, + .actim_ctrlb = 0x00012214, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [1] = { + .rate = 165941176, + .actim_ctrla = 0x629db4c6, + .actim_ctrlb = 0x00012214, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 83000000, + .actim_ctrla = 0x31512283, + .actim_ctrlb = 0x0001220a, + .rfr_ctrl = 0x00025501, + .mr = 0x00000022, + }, + [3] = { + .rate = 82970588, + .actim_ctrla = 0x31512283, + .actim_ctrlb = 0x0001220a, + .rfr_ctrl = 0x00025501, + .mr = 0x00000022, + }, + [4] = { + .rate = 0 + }, +}; + +#endif diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2a30060..2045441 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; +/* SDRC_POWER register bits */ +#define SDRC_POWER_EXTCLKDIS_SHIFT 3 +#define SDRC_POWER_PWDENA_SHIFT 2 +#define SDRC_POWER_PAGEPOLICY_SHIFT 0 /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate @@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) { struct omap_sdrc_params *sp; + if (!sdrc_init_params) + return NULL; + sp = sdrc_init_params; - while (sp->rate != r) + while (sp->rate && sp->rate != r) sp++; if (!sp->rate) @@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) omap2_sms_base = omap2_globals->sms; } -/* turn on smart idle modes for SDRAM scheduler and controller */ +/** + * omap2_sdrc_init - initialize SMS, SDRC devices on boot + * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * + * Turn on smart idle modes for SDRAM scheduler and controller. + * Program a known-good configuration for the SDRC to deal with buggy + * bootloaders. + */ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) { u32 l; @@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) sdrc_write_reg(l, SDRC_SYSCONFIG); sdrc_init_params = sp; + + /* XXX Enable SRFRONIDLEREQ here also? */ + l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | + (1 << SDRC_POWER_PWDENA_SHIFT) | + (1 << SDRC_POWER_PAGEPOLICY_SHIFT); + sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 0afdad5..feaec7e 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force) m_type = omap2xxx_sdrc_get_type(); local_irq_save(flags); - __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP); + if (cpu_is_omap2420()) + __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP); + else + __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP); omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); curr_perf_level = level; local_irq_restore(flags); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 4dcf39c..b094c15 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -6,8 +6,13 @@ * Copyright (C) 2005-2008 Nokia Corporation * Author: Paul Mundt * + * Major rework for PM support by Kevin Hilman + * * Based off of arch/arm/mach-omap/omap1/serial.c * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar #include +#include +#include + +#include "prm.h" +#include "pm.h" +#include "prm-regbits-34xx.h" + +#define UART_OMAP_WER 0x17 /* Wake-up enable register */ + +#define DEFAULT_TIMEOUT (5 * HZ) -static struct clk *uart_ick[OMAP_MAX_NR_PORTS]; -static struct clk *uart_fck[OMAP_MAX_NR_PORTS]; +struct omap_uart_state { + int num; + int can_sleep; + struct timer_list timer; + u32 timeout; + + void __iomem *wk_st; + void __iomem *wk_en; + u32 wk_mask; + u32 padconf; + + struct clk *ick; + struct clk *fck; + int clocked; + + struct plat_serial8250_port *p; + struct list_head node; + +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) + int context_valid; + + /* Registers to be saved/restored for OFF-mode */ + u16 dll; + u16 dlh; + u16 ier; + u16 sysc; + u16 scr; + u16 wer; +#endif +}; + +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; +static LIST_HEAD(uart_list); static struct plat_serial8250_port serial_platform_data[] = { { @@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, * properly. Note that the TX watermark initialization may not be needed * once the 8250.c watermark handling code is merged. */ -static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +static inline void __init omap_uart_reset(struct omap_uart_state *uart) { + struct plat_serial8250_port *p = uart->p; + serial_write_reg(p, UART_OMAP_MDR1, 0x07); serial_write_reg(p, UART_OMAP_SCR, 0x08); serial_write_reg(p, UART_OMAP_MDR1, 0x00); serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); } -void omap_serial_enable_clocks(int enable) +#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) + +static int enable_off_mode; /* to be removed by full off-mode patches */ + +static void omap_uart_save_context(struct omap_uart_state *uart) { - int i; - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - if (uart_ick[i] && uart_fck[i]) { - if (enable) { - clk_enable(uart_ick[i]); - clk_enable(uart_fck[i]); - } else { - clk_disable(uart_ick[i]); - clk_disable(uart_fck[i]); + u16 lcr = 0; + struct plat_serial8250_port *p = uart->p; + + if (!enable_off_mode) + return; + + lcr = serial_read_reg(p, UART_LCR); + serial_write_reg(p, UART_LCR, 0xBF); + uart->dll = serial_read_reg(p, UART_DLL); + uart->dlh = serial_read_reg(p, UART_DLM); + serial_write_reg(p, UART_LCR, lcr); + uart->ier = serial_read_reg(p, UART_IER); + uart->sysc = serial_read_reg(p, UART_OMAP_SYSC); + uart->scr = serial_read_reg(p, UART_OMAP_SCR); + uart->wer = serial_read_reg(p, UART_OMAP_WER); + + uart->context_valid = 1; +} + +static void omap_uart_restore_context(struct omap_uart_state *uart) +{ + u16 efr = 0; + struct plat_serial8250_port *p = uart->p; + + if (!enable_off_mode) + return; + + if (!uart->context_valid) + return; + + uart->context_valid = 0; + + serial_write_reg(p, UART_OMAP_MDR1, 0x7); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + efr = serial_read_reg(p, UART_EFR); + serial_write_reg(p, UART_EFR, UART_EFR_ECB); + serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(p, UART_IER, 0x0); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(p, UART_DLL, uart->dll); + serial_write_reg(p, UART_DLM, uart->dlh); + serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(p, UART_IER, uart->ier); + serial_write_reg(p, UART_FCR, 0xA1); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(p, UART_EFR, efr); + serial_write_reg(p, UART_LCR, UART_LCR_WLEN8); + serial_write_reg(p, UART_OMAP_SCR, uart->scr); + serial_write_reg(p, UART_OMAP_WER, uart->wer); + serial_write_reg(p, UART_OMAP_SYSC, uart->sysc); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ +} +#else +static inline void omap_uart_save_context(struct omap_uart_state *uart) {} +static inline void omap_uart_restore_context(struct omap_uart_state *uart) {} +#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */ + +static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) +{ + if (uart->clocked) + return; + + clk_enable(uart->ick); + clk_enable(uart->fck); + uart->clocked = 1; + omap_uart_restore_context(uart); +} + +#ifdef CONFIG_PM + +static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) +{ + if (!uart->clocked) + return; + + omap_uart_save_context(uart); + uart->clocked = 0; + clk_disable(uart->ick); + clk_disable(uart->fck); +} + +static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, + int enable) +{ + struct plat_serial8250_port *p = uart->p; + u16 sysc; + + sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7; + if (enable) + sysc |= 0x2 << 3; + else + sysc |= 0x1 << 3; + + serial_write_reg(p, UART_OMAP_SYSC, sysc); +} + +static void omap_uart_block_sleep(struct omap_uart_state *uart) +{ + omap_uart_enable_clocks(uart); + + omap_uart_smart_idle_enable(uart, 0); + uart->can_sleep = 0; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + del_timer(&uart->timer); +} + +static void omap_uart_allow_sleep(struct omap_uart_state *uart) +{ + if (!uart->clocked) + return; + + omap_uart_smart_idle_enable(uart, 1); + uart->can_sleep = 1; + del_timer(&uart->timer); +} + +static void omap_uart_idle_timer(unsigned long data) +{ + struct omap_uart_state *uart = (struct omap_uart_state *)data; + + omap_uart_allow_sleep(uart); +} + +void omap_uart_prepare_idle(int num) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (num == uart->num && uart->can_sleep) { + omap_uart_disable_clocks(uart); + return; + } + } +} + +void omap_uart_resume_idle(int num) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (num == uart->num) { + omap_uart_enable_clocks(uart); + + /* Check for IO pad wakeup */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 p = omap_ctrl_readw(uart->padconf); + + if (p & OMAP3_PADCONF_WAKEUPEVENT0) + omap_uart_block_sleep(uart); } + + /* Check for normal UART wakeup */ + if (__raw_readl(uart->wk_st) & uart->wk_mask) + omap_uart_block_sleep(uart); + + return; } } } +void omap_uart_prepare_suspend(void) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + omap_uart_allow_sleep(uart); + } +} + +int omap_uart_can_sleep(void) +{ + struct omap_uart_state *uart; + int can_sleep = 1; + + list_for_each_entry(uart, &uart_list, node) { + if (!uart->clocked) + continue; + + if (!uart->can_sleep) { + can_sleep = 0; + continue; + } + + /* This UART can now safely sleep. */ + omap_uart_allow_sleep(uart); + } + + return can_sleep; +} + +/** + * omap_uart_interrupt() + * + * This handler is used only to detect that *any* UART interrupt has + * occurred. It does _nothing_ to handle the interrupt. Rather, + * any UART interrupt will trigger the inactivity timer so the + * UART will not idle or sleep for its timeout period. + * + **/ +static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) +{ + struct omap_uart_state *uart = dev_id; + + omap_uart_block_sleep(uart); + + return IRQ_NONE; +} + +static u32 sleep_timeout = DEFAULT_TIMEOUT; + +static void omap_uart_idle_init(struct omap_uart_state *uart) +{ + u32 v; + struct plat_serial8250_port *p = uart->p; + int ret; + + uart->can_sleep = 0; + uart->timeout = sleep_timeout; + setup_timer(&uart->timer, omap_uart_idle_timer, + (unsigned long) uart); + mod_timer(&uart->timer, jiffies + uart->timeout); + omap_uart_smart_idle_enable(uart, 0); + + if (cpu_is_omap34xx()) { + u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD; + u32 wk_mask = 0; + u32 padconf = 0; + + uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1); + uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1); + switch (uart->num) { + case 0: + wk_mask = OMAP3430_ST_UART1_MASK; + padconf = 0x182; + break; + case 1: + wk_mask = OMAP3430_ST_UART2_MASK; + padconf = 0x17a; + break; + case 2: + wk_mask = OMAP3430_ST_UART3_MASK; + padconf = 0x19e; + break; + } + uart->wk_mask = wk_mask; + uart->padconf = padconf; + } else if (cpu_is_omap24xx()) { + u32 wk_mask = 0; + + if (cpu_is_omap2430()) { + uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1); + } else if (cpu_is_omap2420()) { + uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1); + } + switch (uart->num) { + case 0: + wk_mask = OMAP24XX_ST_UART1_MASK; + break; + case 1: + wk_mask = OMAP24XX_ST_UART2_MASK; + break; + case 2: + wk_mask = OMAP24XX_ST_UART3_MASK; + break; + } + uart->wk_mask = wk_mask; + } else { + uart->wk_en = 0; + uart->wk_st = 0; + uart->wk_mask = 0; + uart->padconf = 0; + } + + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v; + + v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } + + p->flags |= UPF_SHARE_IRQ; + ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, + "serial idle", (void *)uart); + WARN_ON(ret); +} + +static ssize_t sleep_timeout_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%u\n", sleep_timeout / HZ); +} + +static ssize_t sleep_timeout_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + struct omap_uart_state *uart; + unsigned int value; + + if (sscanf(buf, "%u", &value) != 1) { + printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); + return -EINVAL; + } + sleep_timeout = value * HZ; + list_for_each_entry(uart, &uart_list, node) { + uart->timeout = sleep_timeout; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + } + return n; +} + +static struct kobj_attribute sleep_timeout_attr = + __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); + +#else +static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#endif /* CONFIG_PM */ + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, +}; + void __init omap_serial_init(void) { - int i; + int i, err; const struct omap_uart_config *info; char name[16]; @@ -114,9 +496,14 @@ void __init omap_serial_init(void) if (info == NULL) return; + if (cpu_is_omap44xx()) { + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) + serial_platform_data[i].irq += 32; + } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { struct plat_serial8250_port *p = serial_platform_data + i; + struct omap_uart_state *uart = &omap_uart[i]; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -125,35 +512,39 @@ void __init omap_serial_init(void) } sprintf(name, "uart%d_ick", i+1); - uart_ick[i] = clk_get(NULL, name); - if (IS_ERR(uart_ick[i])) { + uart->ick = clk_get(NULL, name); + if (IS_ERR(uart->ick)) { printk(KERN_ERR "Could not get uart%d_ick\n", i+1); - uart_ick[i] = NULL; - } else - clk_enable(uart_ick[i]); + uart->ick = NULL; + } sprintf(name, "uart%d_fck", i+1); - uart_fck[i] = clk_get(NULL, name); - if (IS_ERR(uart_fck[i])) { + uart->fck = clk_get(NULL, name); + if (IS_ERR(uart->fck)) { printk(KERN_ERR "Could not get uart%d_fck\n", i+1); - uart_fck[i] = NULL; - } else - clk_enable(uart_fck[i]); + uart->fck = NULL; + } - omap_serial_reset(p); + if (!uart->ick || !uart->fck) + continue; + + uart->num = i; + p->private_data = uart; + uart->p = p; + list_add(&uart->node, &uart_list); + + omap_uart_enable_clocks(uart); + omap_uart_reset(uart); + omap_uart_idle_init(uart); } -} -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; + err = platform_device_register(&serial_device); + +#ifdef CONFIG_PM + if (!err) + err = sysfs_create_file(&serial_device.dev.kobj, + &sleep_timeout_attr.attr); +#endif -static int __init omap_init(void) -{ - return platform_device_register(&serial_device); } -arch_initcall(omap_init); + diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index bf9e961..130aadb 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -28,7 +28,6 @@ #include #include #include -#include #include diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S new file mode 100644 index 0000000..e5e2553 --- /dev/null +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -0,0 +1,436 @@ +/* + * linux/arch/arm/mach-omap2/sleep.S + * + * (C) Copyright 2007 + * Texas Instruments + * Karthik Dasu + * + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include +#include + +#include "prm.h" +#include "sdrc.h" + +#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \ + OMAP3430_PM_PREPWSTST) +#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ + OMAP3430_PM_PREPWSTST) +#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL) +#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is + * available */ +#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\ + OMAP343X_CONTROL_MEM_WKUP +\ + SCRATCHPAD_MEM_OFFS) +#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) + + .text +/* Function call to get the restore pointer for resume from OFF */ +ENTRY(get_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore + ldmfd sp!, {pc} @ restore regs and return +ENTRY(get_restore_pointer_sz) + .word . - get_restore_pointer_sz +/* + * Forces OMAP into idle state + * + * omap34xx_suspend() - This bit of code just executes the WFI + * for normal idles. + * + * Note: This code get's copied to internal SRAM at boot. When the OMAP + * wakes up it continues execution at the point it went to sleep. + */ +ENTRY(omap34xx_cpu_suspend) + stmfd sp!, {r0-r12, lr} @ save registers on stack +loop: + /*b loop*/ @Enable to debug by stepping through code + /* r0 contains restore pointer in sdram */ + /* r1 contains information about saving context */ + ldr r4, sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + + cmp r1, #0x0 + /* If context save is required, do that and execute wfi */ + bne save_context_wfi + /* Data memory barrier and Data sync barrier */ + mov r1, #0 + mcr p15, 0, r1, c7, c10, 4 + mcr p15, 0, r1, c7, c10, 5 + + wfi @ wait for interrupt + + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl i_dll_wait + + ldmfd sp!, {r0-r12, pc} @ restore regs and return +restore: + /* b restore*/ @ Enable to debug restore code + /* Check what was the reason for mpu reset and store the reason in r9*/ + /* 1 - Only L1 and logic lost */ + /* 2 - Only L2 lost - In this case, we wont be here */ + /* 3 - Both L1 and L2 lost */ + ldr r1, pm_pwstctrl_mpu + ldr r2, [r1] + and r2, r2, #0x3 + cmp r2, #0x0 @ Check if target power state was OFF or RET + moveq r9, #0x3 @ MPU OFF => L1 and L2 lost + movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation + bne logic_l1_restore + /* Execute smi to invalidate L2 cache */ + mov r12, #0x1 @ set up to invalide L2 +smi: .word 0xE1600070 @ Call SMI monitor (smieq) +logic_l1_restore: + mov r1, #0 + /* Invalidate all instruction caches to PoU + * and flush branch target cache */ + mcr p15, 0, r1, c7, c5, 0 + + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldmia r3!, {r4-r6} + mov sp, r4 + msr spsr_cxsf, r5 + mov lr, r6 + + ldmia r3!, {r4-r9} + /* Coprocessor access Control Register */ + mcr p15, 0, r4, c1, c0, 2 + + /* TTBR0 */ + MCR p15, 0, r5, c2, c0, 0 + /* TTBR1 */ + MCR p15, 0, r6, c2, c0, 1 + /* Translation table base control register */ + MCR p15, 0, r7, c2, c0, 2 + /*domain access Control Register */ + MCR p15, 0, r8, c3, c0, 0 + /* data fault status Register */ + MCR p15, 0, r9, c5, c0, 0 + + ldmia r3!,{r4-r8} + /* instruction fault status Register */ + MCR p15, 0, r4, c5, c0, 1 + /*Data Auxiliary Fault Status Register */ + MCR p15, 0, r5, c5, c1, 0 + /*Instruction Auxiliary Fault Status Register*/ + MCR p15, 0, r6, c5, c1, 1 + /*Data Fault Address Register */ + MCR p15, 0, r7, c6, c0, 0 + /*Instruction Fault Address Register*/ + MCR p15, 0, r8, c6, c0, 2 + ldmia r3!,{r4-r7} + + /* user r/w thread and process ID */ + MCR p15, 0, r4, c13, c0, 2 + /* user ro thread and process ID */ + MCR p15, 0, r5, c13, c0, 3 + /*Privileged only thread and process ID */ + MCR p15, 0, r6, c13, c0, 4 + /* cache size selection */ + MCR p15, 2, r7, c0, c0, 0 + ldmia r3!,{r4-r8} + /* Data TLB lockdown registers */ + MCR p15, 0, r4, c10, c0, 0 + /* Instruction TLB lockdown registers */ + MCR p15, 0, r5, c10, c0, 1 + /* Secure or Nonsecure Vector Base Address */ + MCR p15, 0, r6, c12, c0, 0 + /* FCSE PID */ + MCR p15, 0, r7, c13, c0, 0 + /* Context PID */ + MCR p15, 0, r8, c13, c0, 1 + + ldmia r3!,{r4-r5} + /* primary memory remap register */ + MCR p15, 0, r4, c10, c2, 0 + /*normal memory remap register */ + MCR p15, 0, r5, c10, c2, 1 + + /* Restore cpsr */ + ldmia r3!,{r4} /*load CPSR from SDRAM*/ + msr cpsr, r4 /*store cpsr */ + + /* Enabling MMU here */ + mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */ + /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/ + and r7, #0x7 + cmp r7, #0x0 + beq usettbr0 +ttbr_error: + /* More work needs to be done to support N[0:2] value other than 0 + * So looping here so that the error can be detected + */ + b ttbr_error +usettbr0: + mrc p15, 0, r2, c2, c0, 0 + ldr r5, ttbrbit_mask + and r2, r5 + mov r4, pc + ldr r5, table_index_mask + and r4, r5 /* r4 = 31 to 20 bits of pc */ + /* Extract the value to be written to table entry */ + ldr r1, table_entry + add r1, r1, r4 /* r1 has value to be written to table entry*/ + /* Getting the address of table entry to modify */ + lsr r4, #18 + add r2, r4 /* r2 has the location which needs to be modified */ + /* Storing previous entry of location being modified */ + ldr r5, scratchpad_base + ldr r4, [r2] + str r4, [r5, #0xC0] + /* Modify the table entry */ + str r1, [r2] + /* Storing address of entry being modified + * - will be restored after enabling MMU */ + ldr r5, scratchpad_base + str r2, [r5, #0xC4] + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer + mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array + mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB + mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB + /* Restore control register but dont enable caches here*/ + /* Caches will be enabled after restoring MMU table entry */ + ldmia r3!, {r4} + /* Store previous value of control register in scratchpad */ + str r4, [r5, #0xC8] + ldr r2, cache_pred_disable_mask + and r4, r2 + mcr p15, 0, r4, c1, c0, 0 + + ldmfd sp!, {r0-r12, pc} @ restore regs and return +save_context_wfi: + /*b save_context_wfi*/ @ enable to debug save code + mov r8, r0 /* Store SDRAM address in r8 */ + /* Check what that target sleep state is:stored in r1*/ + /* 1 - Only L1 and logic lost */ + /* 2 - Only L2 lost */ + /* 3 - Both L1 and L2 lost */ + cmp r1, #0x2 /* Only L2 lost */ + beq clean_l2 + cmp r1, #0x1 /* L2 retained */ + /* r9 stores whether to clean L2 or not*/ + moveq r9, #0x0 /* Dont Clean L2 */ + movne r9, #0x1 /* Clean L2 */ +l1_logic_lost: + /* Store sp and spsr to SDRAM */ + mov r4, sp + mrs r5, spsr + mov r6, lr + stmia r8!, {r4-r6} + /* Save all ARM registers */ + /* Coprocessor access control register */ + mrc p15, 0, r6, c1, c0, 2 + stmia r8!, {r6} + /* TTBR0, TTBR1 and Translation table base control */ + mrc p15, 0, r4, c2, c0, 0 + mrc p15, 0, r5, c2, c0, 1 + mrc p15, 0, r6, c2, c0, 2 + stmia r8!, {r4-r6} + /* Domain access control register, data fault status register, + and instruction fault status register */ + mrc p15, 0, r4, c3, c0, 0 + mrc p15, 0, r5, c5, c0, 0 + mrc p15, 0, r6, c5, c0, 1 + stmia r8!, {r4-r6} + /* Data aux fault status register, instruction aux fault status, + datat fault address register and instruction fault address register*/ + mrc p15, 0, r4, c5, c1, 0 + mrc p15, 0, r5, c5, c1, 1 + mrc p15, 0, r6, c6, c0, 0 + mrc p15, 0, r7, c6, c0, 2 + stmia r8!, {r4-r7} + /* user r/w thread and process ID, user r/o thread and process ID, + priv only thread and process ID, cache size selection */ + mrc p15, 0, r4, c13, c0, 2 + mrc p15, 0, r5, c13, c0, 3 + mrc p15, 0, r6, c13, c0, 4 + mrc p15, 2, r7, c0, c0, 0 + stmia r8!, {r4-r7} + /* Data TLB lockdown, instruction TLB lockdown registers */ + mrc p15, 0, r5, c10, c0, 0 + mrc p15, 0, r6, c10, c0, 1 + stmia r8!, {r5-r6} + /* Secure or non secure vector base address, FCSE PID, Context PID*/ + mrc p15, 0, r4, c12, c0, 0 + mrc p15, 0, r5, c13, c0, 0 + mrc p15, 0, r6, c13, c0, 1 + stmia r8!, {r4-r6} + /* Primary remap, normal remap registers */ + mrc p15, 0, r4, c10, c2, 0 + mrc p15, 0, r5, c10, c2, 1 + stmia r8!,{r4-r5} + + /* Store current cpsr*/ + mrs r2, cpsr + stmia r8!, {r2} + + mrc p15, 0, r4, c1, c0, 0 + /* save control register */ + stmia r8!, {r4} +clean_caches: + /* Clean Data or unified cache to POU*/ + /* How to invalidate only L1 cache???? - #FIX_ME# */ + /* mcr p15, 0, r11, c7, c11, 1 */ + cmp r9, #1 /* Check whether L2 inval is required or not*/ + bne skip_l2_inval +clean_l2: + /* read clidr */ + mrc p15, 1, r0, c0, c0, 1 + /* extract loc from clidr */ + ands r3, r0, #0x7000000 + /* left align loc bit field */ + mov r3, r3, lsr #23 + /* if loc is 0, then no need to clean */ + beq finished + /* start clean at cache level 0 */ + mov r10, #0 +loop1: + /* work out 3x current cache level */ + add r2, r10, r10, lsr #1 + /* extract cache type bits from clidr*/ + mov r1, r0, lsr r2 + /* mask of the bits for current cache only */ + and r1, r1, #7 + /* see what cache we have at this level */ + cmp r1, #2 + /* skip if no cache, or just i-cache */ + blt skip + /* select current cache level in cssr */ + mcr p15, 2, r10, c0, c0, 0 + /* isb to sych the new cssr&csidr */ + isb + /* read the new csidr */ + mrc p15, 1, r1, c0, c0, 0 + /* extract the length of the cache lines */ + and r2, r1, #7 + /* add 4 (line length offset) */ + add r2, r2, #4 + ldr r4, assoc_mask + /* find maximum number on the way size */ + ands r4, r4, r1, lsr #3 + /* find bit position of way size increment */ + clz r5, r4 + ldr r7, numset_mask + /* extract max number of the index size*/ + ands r7, r7, r1, lsr #13 +loop2: + mov r9, r4 + /* create working copy of max way size*/ +loop3: + /* factor way and cache number into r11 */ + orr r11, r10, r9, lsl r5 + /* factor index number into r11 */ + orr r11, r11, r7, lsl r2 + /*clean & invalidate by set/way */ + mcr p15, 0, r11, c7, c10, 2 + /* decrement the way*/ + subs r9, r9, #1 + bge loop3 + /*decrement the index */ + subs r7, r7, #1 + bge loop2 +skip: + add r10, r10, #2 + /* increment cache number */ + cmp r3, r10 + bgt loop1 +finished: + /*swith back to cache level 0 */ + mov r10, #0 + /* select current cache level in cssr */ + mcr p15, 2, r10, c0, c0, 0 + isb +skip_l2_inval: + /* Data memory barrier and Data sync barrier */ + mov r1, #0 + mcr p15, 0, r1, c7, c10, 4 + mcr p15, 0, r1, c7, c10, 5 + + wfi @ wait for interrupt + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl i_dll_wait + /* restore regs and return */ + ldmfd sp!, {r0-r12, pc} + +i_dll_wait: + ldr r4, clk_stabilize_delay + +i_dll_delay: + subs r4, r4, #0x1 + bne i_dll_delay + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + bx lr +pm_prepwstst_core: + .word PM_PREPWSTST_CORE_V +pm_prepwstst_mpu: + .word PM_PREPWSTST_MPU_V +pm_pwstctrl_mpu: + .word PM_PWSTCTRL_MPU_P +scratchpad_base: + .word SCRATCHPAD_BASE_P +sdrc_power: + .word SDRC_POWER_V +context_mem: + .word 0x803E3E14 +clk_stabilize_delay: + .word 0x000001FF +assoc_mask: + .word 0x3ff +numset_mask: + .word 0x7fff +ttbrbit_mask: + .word 0xFFFFC000 +table_index_mask: + .word 0xFFF00000 +table_entry: + .word 0x00000C02 +cache_pred_disable_mask: + .word 0xFFFFE7FB +ENTRY(omap34xx_cpu_suspend_sz) + .word . - omap34xx_cpu_suspend diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index af4bd34..bb29985 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll: omap242x_sdi_sdrc_dlla_ctrl: .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) omap242x_sdi_prcm_voltctrl: - .word OMAP242X_PRCM_VOLTCTRL + .word OMAP2420_PRCM_VOLTCTRL prcm_mask_val: .word 0xFFFF3FFC omap242x_sdi_timer_32ksynct_cr: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_ddr_init_sz) .word . - omap242x_sram_ddr_init @@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl: omap242x_srs_sdrc_rfr_ctrl: .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0) omap242x_srs_prcm_voltctrl: - .word OMAP242X_PRCM_VOLTCTRL + .word OMAP2420_PRCM_VOLTCTRL ddr_prcm_mask_val: .word 0xFFFF3FFC omap242x_srs_timer_32ksynct: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_reprogram_sdrc_sz) .word . - omap242x_sram_reprogram_sdrc @@ -305,7 +305,7 @@ wait_dll_lock: ldmfd sp!, {r0-r12, pc} @ restore regs and return omap242x_ssp_set_config: - .word OMAP242X_PRCM_CLKCFG_CTRL + .word OMAP2420_PRCM_CLKCFG_CTRL omap242x_ssp_pll_ctl: .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN) omap242x_ssp_pll_stat: diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index 84363e2..9955abc 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll: omap243x_sdi_sdrc_dlla_ctrl: .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL) omap243x_sdi_prcm_voltctrl: - .word OMAP243X_PRCM_VOLTCTRL + .word OMAP2430_PRCM_VOLTCTRL prcm_mask_val: .word 0xFFFF3FFC omap243x_sdi_timer_32ksynct_cr: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_ddr_init_sz) .word . - omap243x_sram_ddr_init @@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl: omap243x_srs_sdrc_rfr_ctrl: .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0) omap243x_srs_prcm_voltctrl: - .word OMAP243X_PRCM_VOLTCTRL + .word OMAP2430_PRCM_VOLTCTRL ddr_prcm_mask_val: .word 0xFFFF3FFC omap243x_srs_timer_32ksynct: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_reprogram_sdrc_sz) .word . - omap243x_sram_reprogram_sdrc @@ -305,7 +305,7 @@ wait_dll_lock: ldmfd sp!, {r0-r12, pc} @ restore regs and return omap243x_ssp_set_config: - .word OMAP243X_PRCM_CLKCFG_CTRL + .word OMAP2430_PRCM_CLKCFG_CTRL omap243x_ssp_pll_ctl: .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN) omap243x_ssp_pll_stat: diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 2c71461..c080c82 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -40,69 +40,74 @@ /* * Change frequency of core dpll * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 + * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for + * SDRC rates < 83MHz */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack + ldr r4, [sp, #52] @ pull extra args off the stack + dsb @ flush buffered writes to interconnect cmp r3, #0x2 blne configure_sdrc - cmp r3, #0x2 + cmp r4, #0x1 + bleq unlock_dll blne lock_dll - cmp r3, #0x1 - blne unlock_dll bl sdram_in_selfrefresh @ put the SDRAM in self refresh bl configure_core_dpll bl enable_sdrc - cmp r3, #0x1 - blne wait_dll_unlock - cmp r3, #0x2 + cmp r4, #0x1 + bleq wait_dll_unlock blne wait_dll_lock cmp r3, #0x1 blne configure_sdrc + isb @ prevent speculative exec past here mov r0, #0 @ return value ldmfd sp!, {r1-r12, pc} @ restore regs and return unlock_dll: - ldr r4, omap3_sdrc_dlla_ctrl - ldr r5, [r4] - orr r5, r5, #0x4 - str r5, [r4] + ldr r11, omap3_sdrc_dlla_ctrl + ldr r12, [r11] + orr r12, r12, #0x4 + str r12, [r11] @ (no OCP barrier needed) bx lr lock_dll: - ldr r4, omap3_sdrc_dlla_ctrl - ldr r5, [r4] - bic r5, r5, #0x4 - str r5, [r4] + ldr r11, omap3_sdrc_dlla_ctrl + ldr r12, [r11] + bic r12, r12, #0x4 + str r12, [r11] @ (no OCP barrier needed) bx lr sdram_in_selfrefresh: - mov r5, #0x0 @ Move 0 to R5 - mcr p15, 0, r5, c7, c10, 5 @ memory barrier - ldr r4, omap3_sdrc_power @ read the SDRC_POWER register - ldr r5, [r4] @ read the contents of SDRC_POWER - orr r5, r5, #0x40 @ enable self refresh on idle req - str r5, [r4] @ write back to SDRC_POWER register - ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg - ldr r5, [r4] - bic r5, r5, #0x2 @ disable iclk bit for SRDC - str r5, [r4] + ldr r11, omap3_sdrc_power @ read the SDRC_POWER register + ldr r12, [r11] @ read the contents of SDRC_POWER + mov r9, r12 @ keep a copy of SDRC_POWER bits + orr r12, r12, #0x40 @ enable self refresh on idle req + bic r12, r12, #0x4 @ clear PWDENA + str r12, [r11] @ write back to SDRC_POWER register + ldr r12, [r11] @ posted-write barrier for SDRC + ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg + ldr r12, [r11] + bic r12, r12, #0x2 @ disable iclk bit for SDRC + str r12, [r11] wait_sdrc_idle: - ldr r4, omap3_cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 @ check for SDRC idle - cmp r5, #2 + ldr r11, omap3_cm_idlest1_core + ldr r12, [r11] + and r12, r12, #0x2 @ check for SDRC idle + cmp r12, #2 bne wait_sdrc_idle bx lr configure_core_dpll: - ldr r4, omap3_cm_clksel1_pll - ldr r5, [r4] - ldr r6, core_m2_mask_val @ modify m2 for core dpll - and r5, r5, r6 - orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val - str r5, [r4] - mov r5, #0x800 @ wait for the clock to stabilise + ldr r11, omap3_cm_clksel1_pll + ldr r12, [r11] + ldr r10, core_m2_mask_val @ modify m2 for core dpll + and r12, r12, r10 + orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val + str r12, [r11] + ldr r12, [r11] @ posted-write barrier for CM + mov r12, #0x800 @ wait for the clock to stabilise cmp r3, #2 bne wait_clk_stable bx lr wait_clk_stable: - subs r5, r5, #1 + subs r12, r12, #1 bne wait_clk_stable nop nop @@ -116,42 +121,42 @@ wait_clk_stable: nop bx lr enable_sdrc: - ldr r4, omap3_cm_iclken1_core - ldr r5, [r4] - orr r5, r5, #0x2 @ enable iclk bit for SDRC - str r5, [r4] + ldr r11, omap3_cm_iclken1_core + ldr r12, [r11] + orr r12, r12, #0x2 @ enable iclk bit for SDRC + str r12, [r11] wait_sdrc_idle1: - ldr r4, omap3_cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 - cmp r5, #0 + ldr r11, omap3_cm_idlest1_core + ldr r12, [r11] + and r12, r12, #0x2 + cmp r12, #0 bne wait_sdrc_idle1 - ldr r4, omap3_sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] +restore_sdrc_power_val: + ldr r11, omap3_sdrc_power + str r9, [r11] @ restore SDRC_POWER, no barrier needed bx lr wait_dll_lock: - ldr r4, omap3_sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x4 + ldr r11, omap3_sdrc_dlla_status + ldr r12, [r11] + and r12, r12, #0x4 + cmp r12, #0x4 bne wait_dll_lock bx lr wait_dll_unlock: - ldr r4, omap3_sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x0 + ldr r11, omap3_sdrc_dlla_status + ldr r12, [r11] + and r12, r12, #0x4 + cmp r12, #0x0 bne wait_dll_unlock bx lr configure_sdrc: - ldr r4, omap3_sdrc_rfr_ctrl - str r0, [r4] - ldr r4, omap3_sdrc_actim_ctrla - str r1, [r4] - ldr r4, omap3_sdrc_actim_ctrlb - str r2, [r4] + ldr r11, omap3_sdrc_rfr_ctrl + str r0, [r11] + ldr r11, omap3_sdrc_actim_ctrla + str r1, [r11] + ldr r11, omap3_sdrc_actim_ctrlb + str r2, [r11] + ldr r2, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index f36aba1..97eeeeb 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -17,9 +17,10 @@ * * Some parts based off of TI's 24xx code: * - * Copyright (C) 2004 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Texas Instruments, Inc. * * Roughly modelled after the OMAP1 MPU timer code. + * Added OMAP4 support - Santosh Shilimkar * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -37,6 +38,7 @@ #include #include +#include /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 @@ -82,7 +84,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_PERIODIC: period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; period -= 1; - + if (cpu_is_omap44xx()) + period = 0xff; /* FIXME: */ omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period); break; case CLOCK_EVT_MODE_ONESHOT: @@ -145,6 +148,9 @@ static void __init omap2_gp_clockevent_init(void) "timer-gp: omap_dm_timer_set_source() failed\n"); tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + if (cpu_is_omap44xx()) + /* Assuming 32kHz clk is driving GPT1 */ + tick_rate = 32768; /* FIXME: */ pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", gptimer_id, tick_rate); @@ -224,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { +#ifdef CONFIG_LOCAL_TIMERS + twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); +#endif omap_dm_timer_init(); omap2_gp_clockevent_init(); diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c new file mode 100644 index 0000000..c1a650a --- /dev/null +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -0,0 +1,34 @@ +/* + * The MPU local timer source file. In OMAP4, both cortex-a9 cores have + * own timer in it's MPU domain. These timers will be driving the + * linux kernel SMP tick framework when active. These timers are not + * part of the wake up domain. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar + * + * This file is based on arm realview smp platform file. + * Copyright (C) 2002 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = INT_44XX_LOCALTIMER_IRQ; + twd_timer_setup(evt); +} + diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 34a56a1..d85296d 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,10 +28,20 @@ #include #include -#include #include #include +#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404) + +static void __init usb_musb_pm_init(void) +{ + /* Ensure force-idle mode for OTG controller */ + if (cpu_is_omap34xx()) + omap_writel(0, OTG_SYSCONFIG); +} + +#ifdef CONFIG_USB_MUSB_SOC + static struct resource musb_resources[] = { [0] = { /* start and end set dynamically */ .flags = IORESOURCE_MEM, @@ -184,4 +194,13 @@ void __init usb_musb_init(void) printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); return; } + + usb_musb_pm_init(); +} + +#else +void __init usb_musb_init(void) +{ + usb_musb_pm_init(); } +#endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index c14d121..6f3f77d 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include "common.h" @@ -44,6 +45,7 @@ #define TARGET_DEV_BUS 1 #define TARGET_PCI 3 #define TARGET_PCIE 4 +#define TARGET_SRAM 9 #define ATTR_PCIE_MEM 0x59 #define ATTR_PCIE_IO 0x51 #define ATTR_PCIE_WA 0x79 @@ -53,6 +55,7 @@ #define ATTR_DEV_CS1 0x1d #define ATTR_DEV_CS2 0x1b #define ATTR_DEV_BOOT 0xf +#define ATTR_SRAM 0x0 /* * Helpers to get DDR bank info @@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win) return 0; } -static void __init setup_cpu_win(int win, u32 base, u32 size, +static int __init setup_cpu_win(int win, u32 base, u32 size, u8 target, u8 attr, int remap) { if (win >= 8) { printk(KERN_ERR "setup_cpu_win: trying to allocate " "window %d\n", win); - return; + return -ENOSPC; } writel(base & 0xffff0000, CPU_WIN_BASE(win)); @@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size, writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win)); writel(0, CPU_WIN_REMAP_HI(win)); } + return 0; } void __init orion5x_setup_cpu_mbus_bridge(void) @@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) setup_cpu_win(win_alloc_count++, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); } + +int __init orion5x_setup_sram_win(void) +{ + return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE, + ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1); +} diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b1c7778..eafcc49 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include "common.h" @@ -536,16 +536,52 @@ void __init orion5x_xor_init(void) platform_device_register(&orion5x_xor1_channel); } +static struct resource orion5x_crypto_res[] = { + { + .name = "regs", + .start = ORION5X_CRYPTO_PHYS_BASE, + .end = ORION5X_CRYPTO_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .name = "sram", + .start = ORION5X_SRAM_PHYS_BASE, + .end = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "crypto interrupt", + .start = IRQ_ORION5X_CESA, + .end = IRQ_ORION5X_CESA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion5x_crypto_device = { + .name = "mv_crypto", + .id = -1, + .num_resources = ARRAY_SIZE(orion5x_crypto_res), + .resource = orion5x_crypto_res, +}; + +int __init orion5x_crypto_init(void) +{ + int ret; + + ret = orion5x_setup_sram_win(); + if (ret) + return ret; + + return platform_device_register(&orion5x_crypto_device); +} /***************************************************************************** * Watchdog ****************************************************************************/ -static struct orion5x_wdt_platform_data orion5x_wdt_data = { +static struct orion_wdt_platform_data orion5x_wdt_data = { .tclk = 0, }; static struct platform_device orion5x_wdt_device = { - .name = "orion5x_wdt", + .name = "orion_wdt", .id = -1, .dev = { .platform_data = &orion5x_wdt_data, diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 798b9a5..de483e8 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size); void orion5x_setup_dev1_win(u32 base, u32 size); void orion5x_setup_dev2_win(u32 base, u32 size); void orion5x_setup_pcie_wa_win(u32 base, u32 size); +int orion5x_setup_sram_win(void); void orion5x_ehci0_init(void); void orion5x_ehci1_init(void); @@ -37,6 +38,7 @@ void orion5x_spi_init(void); void orion5x_uart0_init(void); void orion5x_uart1_init(void); void orion5x_xor_init(void); +int orion5x_crypto_init(void); /* * PCIe/PCI functions. diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index be896e5..5c9744c 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -17,8 +17,8 @@ #define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) -#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) -#define WDT_RESET 0x0002 +#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define WDT_RESET_OUT_EN 0x0002 #define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 377a773..2d87665 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -24,6 +24,7 @@ * f1000000 on-chip peripheral registers * f2000000 PCIe I/O space * f2100000 PCI I/O space + * f2200000 SRAM dedicated for the crypto unit * f4000000 device bus mappings (boot) * fa000000 device bus mappings (cs0) * fa800000 device bus mappings (cs2) @@ -49,6 +50,9 @@ #define ORION5X_PCI_IO_BUS_BASE 0x00100000 #define ORION5X_PCI_IO_SIZE SZ_1M +#define ORION5X_SRAM_PHYS_BASE (0xf2200000) +#define ORION5X_SRAM_SIZE SZ_8K + /* Relevant only for Orion-1/Orion-NAS */ #define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 #define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 @@ -94,6 +98,8 @@ #define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) #define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000) + #define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) #define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index e912490..60e734c 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd) /* * Enable and issue soft reset */ - orion5x_setbits(CPU_RESET_MASK, (1 << 2)); + orion5x_setbits(RSTOUTn_MASK, (1 << 2)); orion5x_setbits(CPU_SOFT_RESET, 1); } diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index e23a3f9..bc4c3b9 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL); u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL); + /* Initialize gpiolib. */ + orion_gpio_init(); + while (mode->mpp >= 0) { u32 *reg; int num_type; diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 41e6d50..61c086b 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -181,9 +181,9 @@ static void mss2_power_off(void) /* * Enable and issue soft reset */ - reg = readl(CPU_RESET_MASK); + reg = readl(RSTOUTn_MASK); reg |= 1 << 2; - writel(reg, CPU_RESET_MASK); + writel(reg, RSTOUTn_MASK); reg = readl(CPU_SOFT_RESET); reg |= 1; diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h index 0f9cdf4..37b3d48 100644 --- a/arch/arm/mach-orion5x/ts78xx-fpga.h +++ b/arch/arm/mach-orion5x/ts78xx-fpga.h @@ -25,6 +25,7 @@ struct fpga_devices { /* Technologic Systems */ struct fpga_device ts_rtc; struct fpga_device ts_nand; + struct fpga_device ts_rng; }; struct ts78xx_fpga_data { diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 9a6b397..5041d1b 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -270,12 +271,57 @@ static void ts78xx_ts_nand_unload(void) } /***************************************************************************** + * HW RNG + ****************************************************************************/ +#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044) + +static struct resource ts78xx_ts_rng_resource = { + .flags = IORESOURCE_MEM, + .start = TS_RNG_DATA, + .end = TS_RNG_DATA + 4 - 1, +}; + +static struct timeriomem_rng_data ts78xx_ts_rng_data = { + .period = 1000000, /* one second */ +}; + +static struct platform_device ts78xx_ts_rng_device = { + .name = "timeriomem_rng", + .id = -1, + .dev = { + .platform_data = &ts78xx_ts_rng_data, + }, + .resource = &ts78xx_ts_rng_resource, + .num_resources = 1, +}; + +static int ts78xx_ts_rng_load(void) +{ + int rc; + + if (ts78xx_fpga.supports.ts_rng.init == 0) { + rc = platform_device_register(&ts78xx_ts_rng_device); + if (!rc) + ts78xx_fpga.supports.ts_rng.init = 1; + } else + rc = platform_device_add(&ts78xx_ts_rng_device); + + return rc; +}; + +static void ts78xx_ts_rng_unload(void) +{ + platform_device_del(&ts78xx_ts_rng_device); +} + +/***************************************************************************** * FPGA 'hotplug' support code ****************************************************************************/ static void ts78xx_fpga_devices_zero_init(void) { ts78xx_fpga.supports.ts_rtc.init = 0; ts78xx_fpga.supports.ts_nand.init = 0; + ts78xx_fpga.supports.ts_rng.init = 0; } static void ts78xx_fpga_supports(void) @@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void) case TS7800_REV_5: ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; + ts78xx_fpga.supports.ts_rng.present = 1; break; default: ts78xx_fpga.supports.ts_rtc.present = 0; ts78xx_fpga.supports.ts_nand.present = 0; + ts78xx_fpga.supports.ts_rng.present = 0; } } @@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void) } ret |= tmp; } + if (ts78xx_fpga.supports.ts_rng.present == 1) { + tmp = ts78xx_ts_rng_load(); + if (tmp) { + printk(KERN_INFO "TS-78xx: RNG not registered\n"); + ts78xx_fpga.supports.ts_rng.present = 0; + } + ret |= tmp; + } return ret; } @@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void) ts78xx_ts_rtc_unload(); if (ts78xx_fpga.supports.ts_nand.present == 1) ts78xx_ts_nand_unload(); + if (ts78xx_fpga.supports.ts_rng.present == 1) + ts78xx_ts_rng_unload(); return ret; } diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 7ddc22c..6920821 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = { .duplex = DUPLEX_FULL, }; +static struct dsa_chip_data wnr854t_switch_chip_data = { + .port_names[0] = "lan3", + .port_names[1] = "lan4", + .port_names[2] = "wan", + .port_names[3] = "cpu", + .port_names[5] = "lan1", + .port_names[7] = "lan2", +}; + +static struct dsa_platform_data wnr854t_switch_plat_data = { + .nr_chips = 1, + .chip = &wnr854t_switch_chip_data, +}; + static void __init wnr854t_init(void) { /* @@ -110,6 +125,7 @@ static void __init wnr854t_init(void) * Configure peripherals. */ orion5x_eth_init(&wnr854t_eth_data); + orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); orion5x_uart0_init(); orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 17d3fbd..f4533f8 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -51,6 +51,12 @@ config MACH_INTELMOTE2 select IWMMXT select PXA_HAVE_BOARD_IRQS +config MACH_STARGATE2 + bool "Intel Stargate 2 Platform" + select PXA27x + select IWMMXT + select PXA_HAVE_BOARD_IRQS + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x @@ -88,6 +94,10 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. +config SHARPSL_PM + bool + select APM_EMULATION + config CORGI_SSP_DEPRECATED bool select PXA_SSP @@ -280,6 +290,7 @@ config MACH_ZYLONITE select PXA3xx select PXA_SSP select HAVE_PWM + select PXA_HAVE_BOARD_IRQS config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" @@ -308,6 +319,14 @@ config MACH_CM_X300 select PXA3xx select CPU_PXA300 +config MACH_H4700 + bool "HP iPAQ hx4700" + select PXA27x + select IWMMXT + select PXA_SSP + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x @@ -505,12 +524,6 @@ config PXA_SSP help Enable support for PXA2xx SSP ports -config PXA_PWM - tristate - default BACKLIGHT_PWM - help - Enable support for PXA2xx/PXA3xx PWM controllers - config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 682dbf4..d18ffef 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -15,7 +15,6 @@ endif # Generic drivers that other drivers may depend upon obj-$(CONFIG_PXA_SSP) += ssp.o -obj-$(CONFIG_PXA_PWM) += pwm.o # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o @@ -47,6 +46,7 @@ obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o +obj-$(CONFIG_MACH_H4700) += hx4700.o obj-$(CONFIG_MACH_MAGICIAN) += magician.o obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o @@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300) += cm-x300.o obj-$(CONFIG_PXA_EZX) += ezx.o obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o +obj-$(CONFIG_MACH_STARGATE2) += stargate2.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index db52d2c..49ae382 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -86,20 +86,3 @@ void clks_register(struct clk_lookup *clks, size_t num) for (i = 0; i < num; i++) clkdev_add(&clks[i]); } - -int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, - struct device *dev) -{ - struct clk *r = clk_get(dev, id); - struct clk_lookup *l; - - if (!r) - return -ENODEV; - - l = clkdev_alloc(r, alias, alias_dev_name); - clk_put(r); - if (!l) - return -ENODEV; - clkdev_add(l); - return 0; -} diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 34576ba..1d2cec2 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -335,6 +335,10 @@ void __init cmx270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config)); +#ifdef CONFIG_PM + pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); +#endif + cmx270_init_rtc(); cmx270_init_mmc(); cmx270_init_ohci(); diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index a9f48b1..465da26 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -21,18 +21,20 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include #include -#include +#include #include #include @@ -46,6 +48,11 @@ #define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ) +#define GPIO95_RTC_CS (95) +#define GPIO96_RTC_WR (96) +#define GPIO97_RTC_RD (97) +#define GPIO98_RTC_IO (98) + static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { /* LCD */ GPIO54_LCD_LDD_0, @@ -135,6 +142,12 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { GPIO85_GPIO, /* MMC WP */ GPIO99_GPIO, /* Ethernet IRQ */ + /* RTC GPIOs */ + GPIO95_GPIO, /* RTC CS */ + GPIO96_GPIO, /* RTC WR */ + GPIO97_GPIO, /* RTC RD */ + GPIO98_GPIO, /* RTC IO */ + /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, @@ -265,6 +278,7 @@ static struct mtd_partition cm_x300_nand_partitions[] = { static struct pxa3xx_nand_platform_data cm_x300_nand_info = { .enable_arbiter = 1, + .keep_config = 1, .parts = cm_x300_nand_partitions, .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions), }; @@ -441,6 +455,31 @@ static void __init cm_x300_init_i2c(void) static inline void cm_x300_init_i2c(void) {} #endif +#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) +struct v3020_platform_data cm_x300_v3020_pdata = { + .use_gpio = 1, + .gpio_cs = GPIO95_RTC_CS, + .gpio_wr = GPIO96_RTC_WR, + .gpio_rd = GPIO97_RTC_RD, + .gpio_io = GPIO98_RTC_IO, +}; + +static struct platform_device cm_x300_rtc_device = { + .name = "v3020", + .id = -1, + .dev = { + .platform_data = &cm_x300_v3020_pdata, + } +}; + +static void __init cm_x300_init_rtc(void) +{ + platform_device_register(&cm_x300_rtc_device); +} +#else +static inline void cm_x300_init_rtc(void) {} +#endif + static void __init cm_x300_init(void) { /* board-processor specific GPIO initialization */ @@ -453,6 +492,19 @@ static void __init cm_x300_init(void) cm_x300_init_nand(); cm_x300_init_leds(); cm_x300_init_i2c(); + cm_x300_init_rtc(); +} + +static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + mi->nr_banks = 2; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); + mi->bank[1].start = 0xc0000000; + mi->bank[1].node = 0; + mi->bank[1].size = (64*1024*1024); } MACHINE_START(CM_X300, "CM-X300 module") @@ -463,4 +515,5 @@ MACHINE_START(CM_X300, "CM-X300 module") .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, .init_machine = cm_x300_init, + .fixup = cm_x300_fixup, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 930e364..962dda2 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -42,7 +42,7 @@ #include #include -#include +#include #include #include #include @@ -445,13 +445,8 @@ static struct ads7846_platform_data corgi_ads7846_info = { .wait_for_sync = corgi_wait_for_hsync, }; -static void corgi_ads7846_cs(u32 command) -{ - gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip corgi_ads7846_chip = { - .cs_control = corgi_ads7846_cs, + .gpio_cs = CORGI_GPIO_ADS7846_CS, }; static void corgi_bl_kick_battery(void) @@ -475,22 +470,12 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = { .kick_battery = corgi_bl_kick_battery, }; -static void corgi_lcdcon_cs(u32 command) -{ - gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip corgi_lcdcon_chip = { - .cs_control = corgi_lcdcon_cs, + .gpio_cs = CORGI_GPIO_LCDCON_CS, }; -static void corgi_max1111_cs(u32 command) -{ - gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip corgi_max1111_chip = { - .cs_control = corgi_max1111_cs, + .gpio_cs = CORGI_GPIO_MAX1111_CS, }; static struct spi_board_info corgi_spi_devices[] = { @@ -520,32 +505,8 @@ static struct spi_board_info corgi_spi_devices[] = { static void __init corgi_init_spi(void) { - int err; - - err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS"); - if (err) - return; - - err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS"); - if (err) - goto err_free_1; - - err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS"); - if (err) - goto err_free_2; - - gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1); - gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1); - gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1); - pxa2xx_set_spi_info(1, &corgi_spi_info); spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices)); - return; - -err_free_2: - gpio_free(CORGI_GPIO_LCDCON_CS); -err_free_1: - gpio_free(CORGI_GPIO_ADS7846_CS); } #else static inline void corgi_init_spi(void) {} diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 7f04b3a..a093282 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -41,7 +41,6 @@ static void corgi_charger_init(void) pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); - sharpsl_pm_pxa_init(); } static void corgi_measure_temp(int on) @@ -191,7 +190,7 @@ unsigned long corgipm_read_devdata(int type) static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .init = corgi_charger_init, - .exit = sharpsl_pm_pxa_remove, + .exit = NULL, .gpio_batlock = CORGI_GPIO_BAT_COVER, .gpio_acin = CORGI_GPIO_AC_IN, .gpio_batfull = CORGI_GPIO_CHRG_FULL, diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 083a1d8..3a8ee22 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -36,6 +36,8 @@ #include #include #include +#include +#include #include @@ -47,6 +49,8 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); #define freq_debug 0 #endif +static struct regulator *vcc_core; + static unsigned int pxa27x_maxfreq; module_param(pxa27x_maxfreq, uint, 0); MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" @@ -58,6 +62,8 @@ typedef struct { unsigned int cccr; unsigned int div2; unsigned int cclkcfg; + int vmin; + int vmax; } pxa_freqs_t; /* Define the refresh period in mSec for the SDRAM and the number of rows */ @@ -82,24 +88,24 @@ static unsigned int sdram_rows; static pxa_freqs_t pxa255_run_freqs[] = { - /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */ - {132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */ - {199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */ - {265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */ - {331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */ - {398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */ + /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ + { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ + {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */ + {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */ + {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */ + {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */ + {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */ }; /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ static pxa_freqs_t pxa255_turbo_freqs[] = { /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */ - {199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */ - {298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */ - {298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */ - {398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */ + { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ + {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */ + {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */ + {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */ + {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */ }; #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) @@ -148,13 +154,13 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table ((T) ? CCLKCFG_TURBO : 0)) static pxa_freqs_t pxa27x_freqs[] = { - {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)}, - {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)}, - {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)}, - {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)}, - {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)}, - {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)}, - {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)} + {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 }, + {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 }, + {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 }, + {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 }, + {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 }, + {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 }, + {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 } }; #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) @@ -163,6 +169,47 @@ static struct cpufreq_frequency_table extern unsigned get_clk_frequency_khz(int info); +#ifdef CONFIG_REGULATOR + +static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) +{ + int ret = 0; + int vmin, vmax; + + if (!cpu_is_pxa27x()) + return 0; + + vmin = pxa_freq->vmin; + vmax = pxa_freq->vmax; + if ((vmin == -1) || (vmax == -1)) + return 0; + + ret = regulator_set_voltage(vcc_core, vmin, vmax); + if (ret) + pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n", + vmin, vmax); + return ret; +} + +static __init void pxa_cpufreq_init_voltages(void) +{ + vcc_core = regulator_get(NULL, "vcc_core"); + if (IS_ERR(vcc_core)) { + pr_info("cpufreq: Didn't find vcc_core regulator\n"); + vcc_core = NULL; + } else { + pr_info("cpufreq: Found vcc_core regulator\n"); + } +} +#else +static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) +{ + return 0; +} + +static __init void pxa_cpufreq_init_voltages(void) { } +#endif + static void find_freq_tables(struct cpufreq_frequency_table **freq_table, pxa_freqs_t **pxa_freqs) { @@ -251,6 +298,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned long flags; unsigned int new_freq_cpu, new_freq_mem; unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; + int ret = 0; /* Get the current policy */ find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); @@ -273,6 +321,10 @@ static int pxa_set_target(struct cpufreq_policy *policy, freqs.new / 1000, (pxa_freq_settings[idx].div2) ? (new_freq_mem / 2000) : (new_freq_mem / 1000)); + if (vcc_core && freqs.new > freqs.old) + ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); + if (ret) + return ret; /* * Tell everyone what we're about to do... * you should add a notify client with any platform specific @@ -335,6 +387,18 @@ static int pxa_set_target(struct cpufreq_policy *policy, */ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + /* + * Even if voltage setting fails, we don't report it, as the frequency + * change succeeded. The voltage reduction is not a critical failure, + * only power savings will suffer from this. + * + * Note: if the voltage change fails, and a return value is returned, a + * bug is triggered (seems a deadlock). Should anybody find out where, + * the "return 0" should become a "return ret". + */ + if (vcc_core && freqs.new < freqs.old) + ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); + return 0; } @@ -349,6 +413,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) if (cpu_is_pxa27x()) pxa27x_guess_max_freq(); + pxa_cpufreq_init_voltages(); + init_sdram_rows(); /* set default policy and cpuinfo */ diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 2b289f8..7d3e1b4 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -16,15 +16,17 @@ #include #include #include +#include #include #include #include #include -#include +#include #include #include #include +#include #include "generic.h" #include "devices.h" @@ -275,15 +277,26 @@ static struct resource csb726_lan_resources[] = { { .start = CSB726_IRQ_LAN, .end = CSB726_IRQ_LAN, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; +struct smsc911x_platform_config csb726_lan_config = { + .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + + static struct platform_device csb726_lan = { - .name = "smc911x", + .name = "smsc911x", .id = -1, .num_resources = ARRAY_SIZE(csb726_lan_resources), .resource = csb726_lan_resources, + .dev = { + .platform_data = &csb726_lan_config, + }, }; static struct platform_device *devices[] __initdata = { @@ -303,6 +316,7 @@ static void __init csb726_init(void) pxa27x_set_i2c_power_info(NULL); pxa_set_mci_info(&csb726_mci); pxa_set_ohci_info(&csb726_ohci_platform_data); + pxa_set_ac97_info(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 29970f7..ecc08f3 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -8,7 +8,7 @@ #include #include #include -#include +#include #include #include #include @@ -290,7 +290,7 @@ static struct resource pxa3xx_resources_i2c_power[] = { }; struct platform_device pxa3xx_device_i2c_power = { - .name = "pxa2xx-i2c", + .name = "pxa3xx-pwri2c", .id = 1, .resource = pxa3xx_resources_i2c_power, .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power), diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index bc0f73f..243e080 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include #include @@ -41,7 +43,7 @@ #include #include #include -#include +#include #include #include @@ -52,23 +54,31 @@ #define GPIO13_MMC_CD (13) #define GPIO95_MMC_WP (95) #define GPIO56_NAND_RB (56) +#define GPIO93_CAM_RESET (93) +#define GPIO16_USB_HUB_RESET (16) /* eXeda specific GPIOs */ #define GPIO114_MMC_CD (114) #define GPIO20_NAND_RB (20) #define GPIO38_SD_PWEN (38) +#define GPIO37_WLAN_RST (37) +#define GPIO95_TOUCHPAD_INT (95) +#define GPIO130_CAM_RESET (130) +#define GPIO10_USB_HUB_RESET (10) /* common GPIOs */ #define GPIO11_NAND_CS (11) -#define GPIO93_CAM_RESET (93) #define GPIO41_ETHIRQ (41) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) #define GPIO115_WLAN_PWEN (115) #define GPIO19_WLAN_STRAP (19) +#define GPIO9_USB_VBUS_EN (9) static int mmc_cd; static int nand_rb; static int dm9000_flags; +static int cam_reset; +static int usb_hub_reset; static unsigned long common_pin_config[] = { /* AC'97 */ @@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = { /* power controls */ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ - GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ /* NAND controls */ @@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = { }; static unsigned long em_x270_pin_config[] = { - GPIO13_GPIO, /* MMC card detect */ - GPIO56_GPIO, /* NAND Ready/Busy */ - GPIO95_GPIO, /* MMC Write protect */ + GPIO13_GPIO, /* MMC card detect */ + GPIO16_GPIO, /* USB hub reset */ + GPIO56_GPIO, /* NAND Ready/Busy */ + GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ + GPIO95_GPIO, /* MMC Write protect */ }; static unsigned long exeda_pin_config[] = { + GPIO10_GPIO, /* USB hub reset */ GPIO20_GPIO, /* NAND Ready/Busy */ GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */ + GPIO95_GPIO, /* touchpad IRQ */ GPIO114_GPIO, /* MMC card detect */ }; @@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {} /* PXA27x OHCI controller setup */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct regulator *em_x270_usb_ldo; + +static int em_x270_usb_hub_init(void) +{ + int err; + + em_x270_usb_ldo = regulator_get(NULL, "vcc usb"); + if (IS_ERR(em_x270_usb_ldo)) + return PTR_ERR(em_x270_usb_ldo); + + err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en"); + if (err) + goto err_free_usb_ldo; + + err = gpio_request(usb_hub_reset, "hub rst"); + if (err) + goto err_free_vbus_gpio; + + /* USB Hub power-on and reset */ + gpio_direction_output(usb_hub_reset, 0); + regulator_enable(em_x270_usb_ldo); + gpio_set_value(usb_hub_reset, 1); + gpio_set_value(usb_hub_reset, 0); + regulator_disable(em_x270_usb_ldo); + regulator_enable(em_x270_usb_ldo); + gpio_set_value(usb_hub_reset, 1); + + /* enable VBUS */ + gpio_direction_output(GPIO9_USB_VBUS_EN, 1); + + return 0; + +err_free_vbus_gpio: + gpio_free(GPIO9_USB_VBUS_EN); +err_free_usb_ldo: + regulator_put(em_x270_usb_ldo); + + return err; +} + static int em_x270_ohci_init(struct device *dev) { + int err; + + /* we don't want to entirely disable USB if the HUB init failed */ + err = em_x270_usb_hub_init(); + if (err) + pr_err("USB Hub initialization failed: %d\n", err); + /* enable port 2 transiever */ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; return 0; } +static void em_x270_ohci_exit(struct device *dev) +{ + gpio_free(usb_hub_reset); + gpio_free(GPIO9_USB_VBUS_EN); + + if (!IS_ERR(em_x270_usb_ldo)) { + if (regulator_is_enabled(em_x270_usb_ldo)) + regulator_disable(em_x270_usb_ldo); + + regulator_put(em_x270_usb_ldo); + } +} + static struct pxaohci_platform_data em_x270_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, .init = em_x270_ohci_init, + .exit = em_x270_ohci_exit, }; static void __init em_x270_init_ohci(void) @@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi) if (err) return err; + err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP"); + if (err) + goto err_free_pwen; + + if (machine_is_exeda()) { + err = gpio_request(GPIO37_WLAN_RST, "WLAN RST"); + if (err) + goto err_free_strap; + + gpio_direction_output(GPIO37_WLAN_RST, 1); + msleep(100); + } + gpio_direction_output(GPIO19_WLAN_STRAP, 1); - mdelay(100); + msleep(100); pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config)); gpio_direction_output(GPIO115_WLAN_PWEN, 0); - mdelay(100); + msleep(100); gpio_set_value(GPIO115_WLAN_PWEN, 1); - mdelay(100); + msleep(100); spi->bits_per_word = 16; spi_setup(spi); return 0; + +err_free_strap: + gpio_free(GPIO19_WLAN_STRAP); +err_free_pwen: + gpio_free(GPIO115_WLAN_PWEN); + + return err; } static int em_x270_libertas_teardown(struct spi_device *spi) { gpio_set_value(GPIO115_WLAN_PWEN, 0); gpio_free(GPIO115_WLAN_PWEN); + gpio_free(GPIO19_WLAN_STRAP); + + if (machine_is_exeda()) { + gpio_set_value(GPIO37_WLAN_RST, 0); + gpio_free(GPIO37_WLAN_RST); + } return 0; } @@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev) { int ret; - ret = gpio_request(GPIO93_CAM_RESET, "camera reset"); + ret = gpio_request(cam_reset, "camera reset"); if (ret) return ret; - gpio_direction_output(GPIO93_CAM_RESET, 0); + gpio_direction_output(cam_reset, 0); em_x270_camera_ldo = regulator_get(NULL, "vcc cam"); if (em_x270_camera_ldo == NULL) { - gpio_free(GPIO93_CAM_RESET); + gpio_free(cam_reset); return -ENODEV; } ret = regulator_enable(em_x270_camera_ldo); if (ret) { regulator_put(em_x270_camera_ldo); - gpio_free(GPIO93_CAM_RESET); + gpio_free(cam_reset); return ret; } - gpio_set_value(GPIO93_CAM_RESET, 1); + gpio_set_value(cam_reset, 1); return 0; } @@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on) if (on == is_on) return 0; - gpio_set_value(GPIO93_CAM_RESET, !on); + gpio_set_value(cam_reset, !on); if (on) ret = regulator_enable(em_x270_camera_ldo); @@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on) if (ret) return ret; - gpio_set_value(GPIO93_CAM_RESET, on); + gpio_set_value(cam_reset, on); return 0; } @@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = { }, }; -static struct i2c_pxa_platform_data em_x270_i2c_info = { - .fast_mode = 1, -}; - static void __init em_x270_init_camera(void) { - pxa_set_i2c_info(&em_x270_i2c_info); i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info)); pxa_set_camera_info(&em_x270_camera_platform_data); } @@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = { }; struct power_supply_info em_x270_psy_info = { - .name = "LP555597P6H-FPS", + .name = "battery", .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, .voltage_max_design = 4200000, .voltage_min_design = 3000000, @@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void) i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); } +static struct pca953x_platform_data exeda_gpio_ext_pdata = { + .gpio_base = 128, +}; + +static struct i2c_board_info exeda_i2c_info[] = { + { + I2C_BOARD_INFO("pca9555", 0x21), + .platform_data = &exeda_gpio_ext_pdata, + }, +}; + +static struct i2c_pxa_platform_data em_x270_i2c_info = { + .fast_mode = 1, +}; + +static void __init em_x270_init_i2c(void) +{ + pxa_set_i2c_info(&em_x270_i2c_info); + + if (machine_is_exeda()) + i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info)); +} + static void __init em_x270_module_init(void) { pr_info("%s\n", __func__); @@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void) mmc_cd = GPIO13_MMC_CD; nand_rb = GPIO56_NAND_RB; dm9000_flags = DM9000_PLATF_32BITONLY; + cam_reset = GPIO93_CAM_RESET; + usb_hub_reset = GPIO16_USB_HUB_RESET; } static void __init em_x270_exeda_init(void) @@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void) mmc_cd = GPIO114_MMC_CD; nand_rb = GPIO20_NAND_RB; dm9000_flags = DM9000_PLATF_16BITONLY; + cam_reset = GPIO130_CAM_RESET; + usb_hub_reset = GPIO10_USB_HUB_RESET; } static void __init em_x270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); +#ifdef CONFIG_PM + pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); +#endif + if (machine_is_em_x270()) em_x270_module_init(); else if (machine_is_exeda()) @@ -1111,8 +1237,9 @@ static void __init em_x270_init(void) em_x270_init_keypad(); em_x270_init_gpio_keys(); em_x270_init_ac97(); - em_x270_init_camera(); em_x270_init_spi(); + em_x270_init_i2c(); + em_x270_init_camera(); } MACHINE_START(EM_X270, "Compulab EM-X270") diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 7db966d..588b265 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -25,13 +26,19 @@ #include #include #include -#include +#include #include #include #include "devices.h" #include "generic.h" +#define GPIO12_A780_FLIP_LID 12 +#define GPIO15_A1200_FLIP_LID 15 +#define GPIO15_A910_FLIP_LID 15 +#define GPIO12_E680_LOCK_SWITCH 12 +#define GPIO15_E6_LOCK_SWITCH 15 + static struct platform_pwm_backlight_data ezx_backlight_data = { .pwm_id = 0, .max_brightness = 1023, @@ -88,7 +95,7 @@ static struct pxafb_mach_info ezx_fb_info_2 = { .lcd_conn = LCD_COLOR_TFT_18BPP, }; -static struct platform_device *devices[] __initdata = { +static struct platform_device *ezx_devices[] __initdata = { &ezx_backlight_device, }; @@ -651,6 +658,35 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = { #endif /* CONFIG_MACH_EZX_E2 */ #ifdef CONFIG_MACH_EZX_A780 +/* gpio_keys */ +static struct gpio_keys_button a780_buttons[] = { + [0] = { + .code = SW_LID, + .gpio = GPIO12_A780_FLIP_LID, + .active_low = 0, + .desc = "A780 flip lid", + .type = EV_SW, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data a780_gpio_keys_platform_data = { + .buttons = a780_buttons, + .nbuttons = ARRAY_SIZE(a780_buttons), +}; + +static struct platform_device a780_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &a780_gpio_keys_platform_data, + }, +}; + +static struct platform_device *a780_devices[] __initdata = { + &a780_gpio_keys, +}; + static void __init a780_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -663,7 +699,8 @@ static void __init a780_init(void) pxa_set_keypad_info(&a780_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(a780_devices)); } MACHINE_START(EZX_A780, "Motorola EZX A780") @@ -678,10 +715,39 @@ MACHINE_END #endif #ifdef CONFIG_MACH_EZX_E680 +/* gpio_keys */ +static struct gpio_keys_button e680_buttons[] = { + [0] = { + .code = KEY_SCREENLOCK, + .gpio = GPIO12_E680_LOCK_SWITCH, + .active_low = 0, + .desc = "E680 lock switch", + .type = EV_KEY, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data e680_gpio_keys_platform_data = { + .buttons = e680_buttons, + .nbuttons = ARRAY_SIZE(e680_buttons), +}; + +static struct platform_device e680_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &e680_gpio_keys_platform_data, + }, +}; + static struct i2c_board_info __initdata e680_i2c_board_info[] = { { I2C_BOARD_INFO("tea5767", 0x81) }, }; +static struct platform_device *e680_devices[] __initdata = { + &e680_gpio_keys, +}; + static void __init e680_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -695,7 +761,8 @@ static void __init e680_init(void) pxa_set_keypad_info(&e680_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(e680_devices)); } MACHINE_START(EZX_E680, "Motorola EZX E680") @@ -710,10 +777,39 @@ MACHINE_END #endif #ifdef CONFIG_MACH_EZX_A1200 +/* gpio_keys */ +static struct gpio_keys_button a1200_buttons[] = { + [0] = { + .code = SW_LID, + .gpio = GPIO15_A1200_FLIP_LID, + .active_low = 0, + .desc = "A1200 flip lid", + .type = EV_SW, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = { + .buttons = a1200_buttons, + .nbuttons = ARRAY_SIZE(a1200_buttons), +}; + +static struct platform_device a1200_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &a1200_gpio_keys_platform_data, + }, +}; + static struct i2c_board_info __initdata a1200_i2c_board_info[] = { { I2C_BOARD_INFO("tea5767", 0x81) }, }; +static struct platform_device *a1200_devices[] __initdata = { + &a1200_gpio_keys, +}; + static void __init a1200_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -727,7 +823,8 @@ static void __init a1200_init(void) pxa_set_keypad_info(&a1200_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(a1200_devices)); } MACHINE_START(EZX_A1200, "Motorola EZX A1200") @@ -742,6 +839,35 @@ MACHINE_END #endif #ifdef CONFIG_MACH_EZX_A910 +/* gpio_keys */ +static struct gpio_keys_button a910_buttons[] = { + [0] = { + .code = SW_LID, + .gpio = GPIO15_A910_FLIP_LID, + .active_low = 0, + .desc = "A910 flip lid", + .type = EV_SW, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data a910_gpio_keys_platform_data = { + .buttons = a910_buttons, + .nbuttons = ARRAY_SIZE(a910_buttons), +}; + +static struct platform_device a910_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &a910_gpio_keys_platform_data, + }, +}; + +static struct platform_device *a910_devices[] __initdata = { + &a910_gpio_keys, +}; + static void __init a910_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -754,7 +880,8 @@ static void __init a910_init(void) pxa_set_keypad_info(&a910_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(a910_devices)); } MACHINE_START(EZX_A910, "Motorola EZX A910") @@ -769,10 +896,39 @@ MACHINE_END #endif #ifdef CONFIG_MACH_EZX_E6 +/* gpio_keys */ +static struct gpio_keys_button e6_buttons[] = { + [0] = { + .code = KEY_SCREENLOCK, + .gpio = GPIO15_E6_LOCK_SWITCH, + .active_low = 0, + .desc = "E6 lock switch", + .type = EV_KEY, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data e6_gpio_keys_platform_data = { + .buttons = e6_buttons, + .nbuttons = ARRAY_SIZE(e6_buttons), +}; + +static struct platform_device e6_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &e6_gpio_keys_platform_data, + }, +}; + static struct i2c_board_info __initdata e6_i2c_board_info[] = { { I2C_BOARD_INFO("tea5767", 0x81) }, }; +static struct platform_device *e6_devices[] __initdata = { + &e6_gpio_keys, +}; + static void __init e6_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -786,7 +942,8 @@ static void __init e6_init(void) pxa_set_keypad_info(&e6_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(e6_devices)); } MACHINE_START(EZX_E6, "Motorola EZX E6") @@ -805,6 +962,9 @@ static struct i2c_board_info __initdata e2_i2c_board_info[] = { { I2C_BOARD_INFO("tea5767", 0x81) }, }; +static struct platform_device *e2_devices[] __initdata = { +}; + static void __init e2_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -818,7 +978,8 @@ static void __init e2_init(void) pxa_set_keypad_info(&e2_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(e2_devices)); } MACHINE_START(EZX_E2, "Motorola EZX E2") diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c new file mode 100644 index 0000000..7fff467 --- /dev/null +++ b/arch/arm/mach-pxa/hx4700.c @@ -0,0 +1,851 @@ +/* + * Support for HP iPAQ hx4700 PDAs. + * + * Copyright (c) 2008-2009 Philipp Zabel + * + * Based on code: + * Copyright (c) 2004 Hewlett-Packard Company. + * Copyright (c) 2005 SDG Systems, LLC + * Copyright (c) 2006 Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include
\n"; foreach $parameter (@{$args{'parameterlist'}}) { - print "
".$parameter."\n"; + print "
" . $parameter . "\n"; print "
"; output_highlight($args{'parameterdescs'}{$parameter}); } @@ -516,9 +516,9 @@ sub output_typedef_html(%) { my %args = %{$_[0]}; my ($parameter); my $count; - print "

typedef ".$args{'typedef'}."

\n"; + print "

typedef " . $args{'typedef'} . "

\n"; - print "typedef ".$args{'typedef'}."\n"; + print "typedef " . $args{'typedef'} . "\n"; output_section_html(@_); print "
\n"; } @@ -528,8 +528,8 @@ sub output_struct_html(%) { my %args = %{$_[0]}; my ($parameter); - print "

".$args{'type'}." ".$args{'struct'}. " - " .$args{'purpose'}."

\n"; - print "".$args{'type'}." ".$args{'struct'}." {
\n"; + print "

" . $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "

\n"; + print "" . $args{'type'} . " " . $args{'struct'} . " {
\n"; foreach $parameter (@{$args{'parameterlist'}}) { if ($parameter =~ /^#/) { print "$parameter
\n"; @@ -561,7 +561,7 @@ sub output_struct_html(%) { $parameter_name =~ s/\[.*//; ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - print "
".$parameter."\n"; + print "
" . $parameter . "\n"; print "
"; output_highlight($args{'parameterdescs'}{$parameter_name}); } @@ -576,9 +576,9 @@ sub output_function_html(%) { my ($parameter, $section); my $count; - print "

" .$args{'function'}." - ".$args{'purpose'}."

\n"; - print "".$args{'functiontype'}."\n"; - print "".$args{'function'}."\n"; + print "

" . $args{'function'} . " - " . $args{'purpose'} . "

\n"; + print "" . $args{'functiontype'} . "\n"; + print "" . $args{'function'} . "\n"; print "("; $count = 0; foreach $parameter (@{$args{'parameterlist'}}) { @@ -587,7 +587,7 @@ sub output_function_html(%) { # pointer-to-function print "$1$parameter) ($2)"; } else { - print "".$type." ".$parameter.""; + print "" . $type . " " . $parameter . ""; } if ($count != $#{$args{'parameterlist'}}) { $count++; @@ -603,7 +603,7 @@ sub output_function_html(%) { $parameter_name =~ s/\[.*//; ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - print "
".$parameter."\n"; + print "
" . $parameter . "\n"; print "
"; output_highlight($args{'parameterdescs'}{$parameter_name}); } @@ -657,7 +657,7 @@ sub output_function_xml(%) { my $count; my $id; - $id = "API-".$args{'function'}; + $id = "API-" . $args{'function'}; $id =~ s/[^A-Za-z0-9]/-/g; print "\n"; @@ -667,12 +667,12 @@ sub output_function_xml(%) { print " $man_date\n"; print "\n"; print "\n"; - print " ".$args{'function'}."\n"; + print " " . $args{'function'} . "\n"; print " 9\n"; print " " . $kernelversion . "\n"; print "\n"; print "\n"; - print " ".$args{'function'}."\n"; + print " " . $args{'function'} . "\n"; print " \n"; print " "; output_highlight ($args{'purpose'}); @@ -682,8 +682,8 @@ sub output_function_xml(%) { print "\n"; print " Synopsis\n"; print " \n"; - print " ".$args{'functiontype'}." "; - print "".$args{'function'}." \n"; + print " " . $args{'functiontype'} . " "; + print "" . $args{'function'} . " \n"; $count = 0; if ($#{$args{'parameterlist'}} >= 0) { @@ -694,7 +694,7 @@ sub output_function_xml(%) { print " $1$parameter)\n"; print " $2\n"; } else { - print " ".$type; + print " " . $type; print " $parameter\n"; } } @@ -734,7 +734,7 @@ sub output_struct_xml(%) { my ($parameter, $section); my $id; - $id = "API-struct-".$args{'struct'}; + $id = "API-struct-" . $args{'struct'}; $id =~ s/[^A-Za-z0-9]/-/g; print "\n"; @@ -744,12 +744,12 @@ sub output_struct_xml(%) { print " $man_date\n"; print "\n"; print "\n"; - print " ".$args{'type'}." ".$args{'struct'}."\n"; + print " " . $args{'type'} . " " . $args{'struct'} . "\n"; print " 9\n"; print " " . $kernelversion . "\n"; print "\n"; print "\n"; - print " ".$args{'type'}." ".$args{'struct'}."\n"; + print " " . $args{'type'} . " " . $args{'struct'} . "\n"; print " \n"; print " "; output_highlight ($args{'purpose'}); @@ -759,7 +759,7 @@ sub output_struct_xml(%) { print "\n"; print " Synopsis\n"; print " \n"; - print $args{'type'}." ".$args{'struct'}." {\n"; + print $args{'type'} . " " . $args{'struct'} . " {\n"; foreach $parameter (@{$args{'parameterlist'}}) { if ($parameter =~ /^#/) { print "$parameter\n"; @@ -779,7 +779,7 @@ sub output_struct_xml(%) { # bitfield print " $1 $parameter$2;\n"; } else { - print " ".$type." ".$parameter.";\n"; + print " " . $type . " " . $parameter . ";\n"; } } print "};"; @@ -824,7 +824,7 @@ sub output_enum_xml(%) { my $count; my $id; - $id = "API-enum-".$args{'enum'}; + $id = "API-enum-" . $args{'enum'}; $id =~ s/[^A-Za-z0-9]/-/g; print "\n"; @@ -834,12 +834,12 @@ sub output_enum_xml(%) { print " $man_date\n"; print "\n"; print "\n"; - print " enum ".$args{'enum'}."\n"; + print " enum " . $args{'enum'} . "\n"; print " 9\n"; print " " . $kernelversion . "\n"; print "\n"; print "\n"; - print " enum ".$args{'enum'}."\n"; + print " enum " . $args{'enum'} . "\n"; print " \n"; print " "; output_highlight ($args{'purpose'}); @@ -849,7 +849,7 @@ sub output_enum_xml(%) { print "\n"; print " Synopsis\n"; print " \n"; - print "enum ".$args{'enum'}." {\n"; + print "enum " . $args{'enum'} . " {\n"; $count = 0; foreach $parameter (@{$args{'parameterlist'}}) { print " $parameter"; @@ -891,7 +891,7 @@ sub output_typedef_xml(%) { my ($parameter, $section); my $id; - $id = "API-typedef-".$args{'typedef'}; + $id = "API-typedef-" . $args{'typedef'}; $id =~ s/[^A-Za-z0-9]/-/g; print "\n"; @@ -901,11 +901,11 @@ sub output_typedef_xml(%) { print " $man_date\n"; print "\n"; print "\n"; - print " typedef ".$args{'typedef'}."\n"; + print " typedef " . $args{'typedef'} . "\n"; print " 9\n"; print "\n"; print "\n"; - print " typedef ".$args{'typedef'}."\n"; + print " typedef " . $args{'typedef'} . "\n"; print " \n"; print " "; output_highlight ($args{'purpose'}); @@ -914,7 +914,7 @@ sub output_typedef_xml(%) { print "\n"; print " Synopsis\n"; - print " typedef ".$args{'typedef'}.";\n"; + print " typedef " . $args{'typedef'} . ";\n"; print "\n"; output_section_xml(@_); @@ -963,15 +963,15 @@ sub output_function_gnome { my $count; my $id; - $id = $args{'module'}."-".$args{'function'}; + $id = $args{'module'} . "-" . $args{'function'}; $id =~ s/[^A-Za-z0-9]/-/g; print "\n"; - print " ".$args{'function'}."\n"; + print " " . $args{'function'} . "\n"; print " \n"; - print " ".$args{'functiontype'}." "; - print "".$args{'function'}." "; + print " " . $args{'functiontype'} . " "; + print "" . $args{'function'} . " "; print "\n"; $count = 0; @@ -983,7 +983,7 @@ sub output_function_gnome { print " $1 $parameter)\n"; print " $2\n"; } else { - print " ".$type; + print " " . $type; print " $parameter\n"; } } @@ -1043,13 +1043,13 @@ sub output_function_man(%) { print ".TH \"$args{'function'}\" 9 \"$args{'function'}\" \"$man_date\" \"Kernel Hacker's Manual\" LINUX\n"; print ".SH NAME\n"; - print $args{'function'}." \\- ".$args{'purpose'}."\n"; + print $args{'function'} . " \\- " . $args{'purpose'} . "\n"; print ".SH SYNOPSIS\n"; if ($args{'functiontype'} ne "") { - print ".B \"".$args{'functiontype'}."\" ".$args{'function'}."\n"; + print ".B \"" . $args{'functiontype'} . "\" " . $args{'function'} . "\n"; } else { - print ".B \"".$args{'function'}."\n"; + print ".B \"" . $args{'function'} . "\n"; } $count = 0; my $parenth = "("; @@ -1061,10 +1061,10 @@ sub output_function_man(%) { $type = $args{'parametertypes'}{$parameter}; if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { # pointer-to-function - print ".BI \"".$parenth.$1."\" ".$parameter." \") (".$2.")".$post."\"\n"; + print ".BI \"" . $parenth . $1 . "\" " . $parameter . " \") (" . $2 . ")" . $post . "\"\n"; } else { $type =~ s/([^\*])$/$1 /; - print ".BI \"".$parenth.$type."\" ".$parameter." \"".$post."\"\n"; + print ".BI \"" . $parenth . $type . "\" " . $parameter . " \"" . $post . "\"\n"; } $count++; $parenth = ""; @@ -1075,7 +1075,7 @@ sub output_function_man(%) { my $parameter_name = $parameter; $parameter_name =~ s/\[.*//; - print ".IP \"".$parameter."\" 12\n"; + print ".IP \"" . $parameter . "\" 12\n"; output_highlight($args{'parameterdescs'}{$parameter_name}); } foreach $section (@{$args{'sectionlist'}}) { @@ -1094,10 +1094,10 @@ sub output_enum_man(%) { print ".TH \"$args{'module'}\" 9 \"enum $args{'enum'}\" \"$man_date\" \"API Manual\" LINUX\n"; print ".SH NAME\n"; - print "enum ".$args{'enum'}." \\- ".$args{'purpose'}."\n"; + print "enum " . $args{'enum'} . " \\- " . $args{'purpose'} . "\n"; print ".SH SYNOPSIS\n"; - print "enum ".$args{'enum'}." {\n"; + print "enum " . $args{'enum'} . " {\n"; $count = 0; foreach my $parameter (@{$args{'parameterlist'}}) { print ".br\n.BI \" $parameter\"\n"; @@ -1116,7 +1116,7 @@ sub output_enum_man(%) { my $parameter_name = $parameter; $parameter_name =~ s/\[.*//; - print ".IP \"".$parameter."\" 12\n"; + print ".IP \"" . $parameter . "\" 12\n"; output_highlight($args{'parameterdescs'}{$parameter_name}); } foreach $section (@{$args{'sectionlist'}}) { @@ -1131,13 +1131,13 @@ sub output_struct_man(%) { my %args = %{$_[0]}; my ($parameter, $section); - print ".TH \"$args{'module'}\" 9 \"".$args{'type'}." ".$args{'struct'}."\" \"$man_date\" \"API Manual\" LINUX\n"; + print ".TH \"$args{'module'}\" 9 \"" . $args{'type'} . " " . $args{'struct'} . "\" \"$man_date\" \"API Manual\" LINUX\n"; print ".SH NAME\n"; - print $args{'type'}." ".$args{'struct'}." \\- ".$args{'purpose'}."\n"; + print $args{'type'} . " " . $args{'struct'} . " \\- " . $args{'purpose'} . "\n"; print ".SH SYNOPSIS\n"; - print $args{'type'}." ".$args{'struct'}." {\n.br\n"; + print $args{'type'} . " " . $args{'struct'} . " {\n.br\n"; foreach my $parameter (@{$args{'parameterlist'}}) { if ($parameter =~ /^#/) { @@ -1151,13 +1151,13 @@ sub output_struct_man(%) { $type = $args{'parametertypes'}{$parameter}; if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { # pointer-to-function - print ".BI \" ".$1."\" ".$parameter." \") (".$2.")"."\"\n;\n"; + print ".BI \" " . $1 . "\" " . $parameter . " \") (" . $2 . ")" . "\"\n;\n"; } elsif ($type =~ m/^(.*?)\s*(:.*)/) { # bitfield - print ".BI \" ".$1."\ \" ".$parameter.$2." \""."\"\n;\n"; + print ".BI \" " . $1 . "\ \" " . $parameter . $2 . " \"" . "\"\n;\n"; } else { $type =~ s/([^\*])$/$1 /; - print ".BI \" ".$type."\" ".$parameter." \""."\"\n;\n"; + print ".BI \" " . $type . "\" " . $parameter . " \"" . "\"\n;\n"; } print "\n.br\n"; } @@ -1171,7 +1171,7 @@ sub output_struct_man(%) { $parameter_name =~ s/\[.*//; ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - print ".IP \"".$parameter."\" 12\n"; + print ".IP \"" . $parameter . "\" 12\n"; output_highlight($args{'parameterdescs'}{$parameter_name}); } foreach $section (@{$args{'sectionlist'}}) { @@ -1189,7 +1189,7 @@ sub output_typedef_man(%) { print ".TH \"$args{'module'}\" 9 \"$args{'typedef'}\" \"$man_date\" \"API Manual\" LINUX\n"; print ".SH NAME\n"; - print "typedef ".$args{'typedef'}." \\- ".$args{'purpose'}."\n"; + print "typedef " . $args{'typedef'} . " \\- " . $args{'purpose'} . "\n"; foreach $section (@{$args{'sectionlist'}}) { print ".SH \"$section\"\n"; @@ -1218,13 +1218,13 @@ sub output_function_text(%) { my $start; print "Name:\n\n"; - print $args{'function'}." - ".$args{'purpose'}."\n"; + print $args{'function'} . " - " . $args{'purpose'} . "\n"; print "\nSynopsis:\n\n"; if ($args{'functiontype'} ne "") { - $start = $args{'functiontype'}." ".$args{'function'}." ("; + $start = $args{'functiontype'} . " " . $args{'function'} . " ("; } else { - $start = $args{'function'}." ("; + $start = $args{'function'} . " ("; } print $start; @@ -1233,9 +1233,9 @@ sub output_function_text(%) { $type = $args{'parametertypes'}{$parameter}; if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { # pointer-to-function - print $1.$parameter.") (".$2; + print $1 . $parameter . ") (" . $2; } else { - print $type." ".$parameter; + print $type . " " . $parameter; } if ($count != $#{$args{'parameterlist'}}) { $count++; @@ -1251,7 +1251,7 @@ sub output_function_text(%) { my $parameter_name = $parameter; $parameter_name =~ s/\[.*//; - print $parameter."\n\t".$args{'parameterdescs'}{$parameter_name}."\n"; + print $parameter . "\n\t" . $args{'parameterdescs'}{$parameter_name} . "\n"; } output_section_text(@_); } @@ -1276,8 +1276,8 @@ sub output_enum_text(%) { my $count; print "Enum:\n\n"; - print "enum ".$args{'enum'}." - ".$args{'purpose'}."\n\n"; - print "enum ".$args{'enum'}." {\n"; + print "enum " . $args{'enum'} . " - " . $args{'purpose'} . "\n\n"; + print "enum " . $args{'enum'} . " {\n"; $count = 0; foreach $parameter (@{$args{'parameterlist'}}) { print "\t$parameter"; @@ -1292,7 +1292,7 @@ sub output_enum_text(%) { print "Constants:\n\n"; foreach $parameter (@{$args{'parameterlist'}}) { print "$parameter\n\t"; - print $args{'parameterdescs'}{$parameter}."\n"; + print $args{'parameterdescs'}{$parameter} . "\n"; } output_section_text(@_); @@ -1305,7 +1305,7 @@ sub output_typedef_text(%) { my $count; print "Typedef:\n\n"; - print "typedef ".$args{'typedef'}." - ".$args{'purpose'}."\n"; + print "typedef " . $args{'typedef'} . " - " . $args{'purpose'} . "\n"; output_section_text(@_); } @@ -1314,8 +1314,8 @@ sub output_struct_text(%) { my %args = %{$_[0]}; my ($parameter); - print $args{'type'}." ".$args{'struct'}." - ".$args{'purpose'}."\n\n"; - print $args{'type'}." ".$args{'struct'}." {\n"; + print $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "\n\n"; + print $args{'type'} . " " . $args{'struct'} . " {\n"; foreach $parameter (@{$args{'parameterlist'}}) { if ($parameter =~ /^#/) { print "$parameter\n"; @@ -1334,7 +1334,7 @@ sub output_struct_text(%) { # bitfield print "\t$1 $parameter$2;\n"; } else { - print "\t".$type." ".$parameter.";\n"; + print "\t" . $type . " " . $parameter . ";\n"; } } print "};\n\n"; @@ -1348,7 +1348,7 @@ sub output_struct_text(%) { ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; print "$parameter\n\t"; - print $args{'parameterdescs'}{$parameter_name}."\n"; + print $args{'parameterdescs'}{$parameter_name} . "\n"; } print "\n"; output_section_text(@_); @@ -1387,7 +1387,7 @@ sub output_declaration { # generic output function - calls the right one based on current output mode. sub output_blockhead { no strict 'refs'; - my $func = "output_blockhead_".$output_mode; + my $func = "output_blockhead_" . $output_mode; &$func(@_); $section_counter++; } @@ -1398,7 +1398,7 @@ sub output_blockhead { sub dump_declaration($$) { no strict 'refs'; my ($prototype, $file) = @_; - my $func = "dump_".$decl_type; + my $func = "dump_" . $decl_type; &$func(@_); } @@ -1645,7 +1645,7 @@ sub push_parameter($$$) { "or member '$param' not " . "described in '$declaration_name'\n"; } - print STDERR "Warning(${file}:$.):". + print STDERR "Warning(${file}:$.):" . " No description found for parameter '$param'\n"; ++$warnings; } @@ -1828,6 +1828,25 @@ sub reset_state { $state = 0; } +sub tracepoint_munge($) { + my $file = shift; + my $tracepointname = 0; + my $tracepointargs = 0; + + if($prototype =~ m/TRACE_EVENT\((.*?),/) { + $tracepointname = $1; + } + if($prototype =~ m/TP_PROTO\((.*?)\)/) { + $tracepointargs = $1; + } + if (($tracepointname eq 0) || ($tracepointargs eq 0)) { + print STDERR "Warning(${file}:$.): Unrecognized tracepoint format: \n". + "$prototype\n"; + } else { + $prototype = "static inline void trace_$tracepointname($tracepointargs)"; + } +} + sub syscall_munge() { my $void = 0; @@ -1882,6 +1901,9 @@ sub process_state3_function($$) { if ($prototype =~ /SYSCALL_DEFINE/) { syscall_munge(); } + if ($prototype =~ /TRACE_EVENT/) { + tracepoint_munge($file); + } dump_function($prototype, $file); reset_state(); } @@ -1907,7 +1929,7 @@ sub process_state3_type($$) { ($2 eq '{') && $brcount++; ($2 eq '}') && $brcount--; if (($2 eq ';') && ($brcount == 0)) { - dump_declaration($prototype,$file); + dump_declaration($prototype, $file); reset_state(); last; } @@ -2084,7 +2106,7 @@ sub process_file($) { $section = $section_default; $contents = ""; } else { - $contents .= $1."\n"; + $contents .= $1 . "\n"; } } else { # i dont know - bad line? ignore. diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index a334428..40e0045 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -641,7 +641,7 @@ static int do_virtio_entry(const char *filename, struct virtio_device_id *id, id->vendor = TO_NATIVE(id->vendor); strcpy(alias, "virtio:"); - ADD(alias, "d", 1, id->device); + ADD(alias, "d", id->device != VIRTIO_DEV_ANY_ID, id->device); ADD(alias, "v", id->vendor != VIRTIO_DEV_ANY_ID, id->vendor); add_wildcard(alias); diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 161b784..4522948 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -763,6 +763,8 @@ static void check_section(const char *modname, struct elf_info *elf, #define ALL_INIT_DATA_SECTIONS \ + ".init.setup$", ".init.rodata$", \ + ".devinit.rodata$", ".cpuinit.rodata$", ".meminit.rodata$" \ ".init.data$", ".devinit.data$", ".cpuinit.data$", ".meminit.data$" #define ALL_EXIT_DATA_SECTIONS \ ".exit.data$", ".devexit.data$", ".cpuexit.data$", ".memexit.data$" @@ -772,21 +774,23 @@ static void check_section(const char *modname, struct elf_info *elf, #define ALL_EXIT_TEXT_SECTIONS \ ".exit.text$", ".devexit.text$", ".cpuexit.text$", ".memexit.text$" -#define ALL_INIT_SECTIONS ALL_INIT_DATA_SECTIONS, ALL_INIT_TEXT_SECTIONS -#define ALL_EXIT_SECTIONS ALL_EXIT_DATA_SECTIONS, ALL_EXIT_TEXT_SECTIONS +#define ALL_INIT_SECTIONS INIT_SECTIONS, DEV_INIT_SECTIONS, \ + CPU_INIT_SECTIONS, MEM_INIT_SECTIONS +#define ALL_EXIT_SECTIONS EXIT_SECTIONS, DEV_EXIT_SECTIONS, \ + CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS #define DATA_SECTIONS ".data$", ".data.rel$" #define TEXT_SECTIONS ".text$" -#define INIT_SECTIONS ".init.data$", ".init.text$" -#define DEV_INIT_SECTIONS ".devinit.data$", ".devinit.text$" -#define CPU_INIT_SECTIONS ".cpuinit.data$", ".cpuinit.text$" -#define MEM_INIT_SECTIONS ".meminit.data$", ".meminit.text$" +#define INIT_SECTIONS ".init.*" +#define DEV_INIT_SECTIONS ".devinit.*" +#define CPU_INIT_SECTIONS ".cpuinit.*" +#define MEM_INIT_SECTIONS ".meminit.*" -#define EXIT_SECTIONS ".exit.data$", ".exit.text$" -#define DEV_EXIT_SECTIONS ".devexit.data$", ".devexit.text$" -#define CPU_EXIT_SECTIONS ".cpuexit.data$", ".cpuexit.text$" -#define MEM_EXIT_SECTIONS ".memexit.data$", ".memexit.text$" +#define EXIT_SECTIONS ".exit.*" +#define DEV_EXIT_SECTIONS ".devexit.*" +#define CPU_EXIT_SECTIONS ".cpuexit.*" +#define MEM_EXIT_SECTIONS ".memexit.*" /* init data sections */ static const char *init_data_sections[] = { ALL_INIT_DATA_SECTIONS, NULL }; @@ -869,12 +873,36 @@ const struct sectioncheck sectioncheck[] = { .tosec = { INIT_SECTIONS, NULL }, .mismatch = XXXINIT_TO_INIT, }, +/* Do not reference cpuinit code/data from meminit code/data */ +{ + .fromsec = { MEM_INIT_SECTIONS, NULL }, + .tosec = { CPU_INIT_SECTIONS, NULL }, + .mismatch = XXXINIT_TO_INIT, +}, +/* Do not reference meminit code/data from cpuinit code/data */ +{ + .fromsec = { CPU_INIT_SECTIONS, NULL }, + .tosec = { MEM_INIT_SECTIONS, NULL }, + .mismatch = XXXINIT_TO_INIT, +}, /* Do not reference exit code/data from devexit/cpuexit/memexit code/data */ { .fromsec = { DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS, NULL }, .tosec = { EXIT_SECTIONS, NULL }, .mismatch = XXXEXIT_TO_EXIT, }, +/* Do not reference cpuexit code/data from memexit code/data */ +{ + .fromsec = { MEM_EXIT_SECTIONS, NULL }, + .tosec = { CPU_EXIT_SECTIONS, NULL }, + .mismatch = XXXEXIT_TO_EXIT, +}, +/* Do not reference memexit code/data from cpuexit code/data */ +{ + .fromsec = { CPU_EXIT_SECTIONS, NULL }, + .tosec = { MEM_EXIT_SECTIONS, NULL }, + .mismatch = XXXEXIT_TO_EXIT, +}, /* Do not use exit code/data from init code */ { .fromsec = { ALL_INIT_SECTIONS, NULL }, @@ -1168,7 +1196,7 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch, "The variable %s references\n" "the %s %s%s%s\n" "If the reference is valid then annotate the\n" - "variable with __init* (see linux/init.h) " + "variable with __init* or __refdata (see linux/init.h) " "or name the variable:\n", fromsym, to, sec2annotation(tosec), tosym, to_p); while (*s) diff --git a/scripts/package/builddeb b/scripts/package/builddeb index 1264b8e..01c2d13 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -1,38 +1,58 @@ #!/bin/sh # -# builddeb 1.2 +# builddeb 1.3 # Copyright 2003 Wichert Akkerman # # Simple script to generate a deb package for a Linux kernel. All the -# complexity of what to do with a kernel after it is installer or removed +# complexity of what to do with a kernel after it is installed or removed # is left to other scripts and packages: they can install scripts in the -# /etc/kernel/{pre,post}{inst,rm}.d/ directories that will be called on -# package install and removal. +# /etc/kernel/{pre,post}{inst,rm}.d/ directories (or an alternative location +# specified in KDEB_HOOKDIR) that will be called on package install and +# removal. set -e +create_package() { + local pname="$1" pdir="$2" + + cp debian/copyright "$pdir/usr/share/doc/$pname/" + + # Fix ownership and permissions + chown -R root:root "$pdir" + chmod -R go-w "$pdir" + + # Create the package + dpkg-gencontrol -isp -p$pname -P"$pdir" + dpkg --build "$pdir" .. +} + # Some variables and settings used throughout the script version=$KERNELRELEASE -revision=`cat .version` +revision=$(cat .version) +if [ -n "$KDEB_PKGVERSION" ]; then + packageversion=$KDEB_PKGVERSION +else + packageversion=$version-$revision +fi tmpdir="$objtree/debian/tmp" fwdir="$objtree/debian/fwtmp" -packagename=linux-$version +packagename=linux-image-$version fwpackagename=linux-firmware-image -if [ "$ARCH" == "um" ] ; then +if [ "$ARCH" = "um" ] ; then packagename=user-mode-linux-$version fi # Setup the directory structure rm -rf "$tmpdir" "$fwdir" -mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" -mkdir -p "$fwdir/DEBIAN" "$fwdir/lib" -if [ "$ARCH" == "um" ] ; then - mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin" +mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" "$tmpdir/usr/share/doc/$packagename" +mkdir -p "$fwdir/DEBIAN" "$fwdir/lib" "$fwdir/usr/share/doc/$fwpackagename" +if [ "$ARCH" = "um" ] ; then + mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/bin" fi # Build and install the kernel -if [ "$ARCH" == "um" ] ; then +if [ "$ARCH" = "um" ] ; then $MAKE linux cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map" cp .config "$tmpdir/usr/share/doc/$packagename/config" @@ -41,53 +61,100 @@ if [ "$ARCH" == "um" ] ; then else cp System.map "$tmpdir/boot/System.map-$version" cp .config "$tmpdir/boot/config-$version" - cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version" + # Not all arches include the boot path in KBUILD_IMAGE + if ! cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"; then + cp arch/$ARCH/boot/$KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version" + fi fi if grep -q '^CONFIG_MODULES=y' .config ; then INSTALL_MOD_PATH="$tmpdir" make KBUILD_SRC= modules_install - if [ "$ARCH" == "um" ] ; then + if [ "$ARCH" = "um" ] ; then mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/" rmdir "$tmpdir/lib/modules/$version" fi fi # Install the maintainer scripts +# Note: hook scripts under /etc/kernel are also executed by official Debian +# kernel packages, as well as kernel packages built using make-kpkg +debhookdir=${KDEB_HOOKDIR:-/etc/kernel} for script in postinst postrm preinst prerm ; do - mkdir -p "$tmpdir/etc/kernel/$script.d" + mkdir -p "$tmpdir$debhookdir/$script.d" cat < "$tmpdir/DEBIAN/$script" #!/bin/sh set -e -test -d /etc/kernel/$script.d && run-parts --arg="$version" /etc/kernel/$script.d +# Pass maintainer script parameters to hook scripts +export DEB_MAINT_PARAMS="\$@" + +test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d exit 0 EOF chmod 755 "$tmpdir/DEBIAN/$script" done -name="Kernel Compiler <$(id -nu)@$(hostname -f)>" +# Try to determine maintainer and email values +if [ -n "$DEBEMAIL" ]; then + email=$DEBEMAIL +elif [ -n "$EMAIL" ]; then + email=$EMAIL +else + email=$(id -nu)@$(hostname -f) +fi +if [ -n "$DEBFULLNAME" ]; then + name=$DEBFULLNAME +elif [ -n "$NAME" ]; then + name=$NAME +else + name="Anonymous" +fi +maintainer="$name <$email>" + # Generate a simple changelog template cat < debian/changelog -linux ($version-$revision) unstable; urgency=low +linux-upstream ($packageversion) unstable; urgency=low - * A standard release + * Custom built Linux kernel. - -- $name $(date -R) + -- $maintainer $(date -R) EOF -# Generate a control file -if [ "$ARCH" == "um" ]; then +# Generate copyright file +cat < debian/copyright +This is a packacked upstream version of the Linux kernel. + +The sources may be found at most Linux ftp sites, including: +ftp://ftp.kernel.org/pub/linux/kernel +Copyright: 1991 - 2009 Linus Torvalds and others. + +The git repository for mainline kernel development is at: +git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 dated June, 1991. + +On Debian GNU/Linux systems, the complete text of the GNU General Public +License version 2 can be found in \`/usr/share/common-licenses/GPL-2'. +EOF + +# Generate a control file cat < debian/control -Source: linux -Section: base +Source: linux-upstream +Section: admin Priority: optional -Maintainer: $name -Standards-Version: 3.6.1 +Maintainer: $maintainer +Standards-Version: 3.8.1 +EOF + +if [ "$ARCH" = "um" ]; then + cat <> debian/control Package: $packagename -Provides: kernel-image-$version, linux-image-$version +Provides: linux-image, linux-image-2.6, linux-modules-$version Architecture: any Description: User Mode Linux kernel, version $version User-mode Linux is a port of the Linux kernel to its own system call @@ -97,30 +164,22 @@ Description: User Mode Linux kernel, version $version many other things. . This package contains the Linux kernel, modules and corresponding other - files version $version + files, version: $version. EOF else -cat < debian/control -Source: linux -Section: base -Priority: optional -Maintainer: $name -Standards-Version: 3.6.1 + cat <> debian/control Package: $packagename -Provides: kernel-image-$version, linux-image-$version +Provides: linux-image, linux-image-2.6, linux-modules-$version Suggests: $fwpackagename Architecture: any Description: Linux kernel, version $version This package contains the Linux kernel, modules and corresponding other - files version $version + files, version: $version. EOF -fi -# Fix some ownership and permissions -chown -R root:root "$tmpdir" -chmod -R go-w "$tmpdir" +fi # Do we have firmware? Move it out of the way and build it into a package. if [ -e "$tmpdir/lib/firmware" ]; then @@ -131,16 +190,12 @@ if [ -e "$tmpdir/lib/firmware" ]; then Package: $fwpackagename Architecture: all Description: Linux kernel firmware, version $version - This package contains firmware from the Linux kernel, version $version + This package contains firmware from the Linux kernel, version $version. EOF - dpkg-gencontrol -isp -p$fwpackagename -P"$fwdir" - dpkg --build "$fwdir" .. + create_package "$fwpackagename" "$fwdir" fi -# Perform the final magic -dpkg-gencontrol -isp -p$packagename -dpkg --build "$tmpdir" .. +create_package "$packagename" "$tmpdir" exit 0 - diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 409596e..91033e6 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -26,7 +26,7 @@ # which will also be the location of that section after final link. # e.g. # -# .section ".text.sched" +# .section ".sched.text", "ax" # .globl my_func # my_func: # [...] @@ -39,7 +39,7 @@ # [...] # # Both relocation offsets for the mcounts in the above example will be -# offset from .text.sched. If we make another file called tmp.s with: +# offset from .sched.text. If we make another file called tmp.s with: # # .section __mcount_loc # .quad my_func + 0x5 @@ -51,7 +51,7 @@ # But this gets hard if my_func is not globl (a static function). # In such a case we have: # -# .section ".text.sched" +# .section ".sched.text", "ax" # my_func: # [...] # call mcount (offset: 0x5) @@ -185,6 +185,19 @@ if ($arch eq "x86_64") { $objcopy .= " -O elf32-i386"; $cc .= " -m32"; +} elsif ($arch eq "s390" && $bits == 32) { + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_32\\s+_mcount\$"; + $alignment = 4; + $ld .= " -m elf_s390"; + $cc .= " -m31"; + +} elsif ($arch eq "s390" && $bits == 64) { + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$"; + $alignment = 8; + $type = ".quad"; + $ld .= " -m elf64_s390"; + $cc .= " -m64"; + } elsif ($arch eq "sh") { $alignment = 2; diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 0079047..46989b8 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -39,8 +39,10 @@ if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then printf -- '-svn%s' "`git svn find-rev $head`" fi - # Are there uncommitted changes? - git update-index --refresh --unmerged > /dev/null + # Update index only on r/w media + [ -w . ] && git update-index --refresh --unmerged > /dev/null + + # Check for uncommitted changes if git diff-index --name-only HEAD | grep -v "^scripts/package" \ | read dummy; then printf '%s' -dirty diff --git a/scripts/unifdef.c b/scripts/unifdef.c index 05a31a6..30d459f 100644 --- a/scripts/unifdef.c +++ b/scripts/unifdef.c @@ -678,8 +678,10 @@ eval_unary(const struct ops *ops, int *valp, const char **cpp) if (*cp == '!') { debug("eval%d !", ops - eval_ops); cp++; - if (eval_unary(ops, valp, &cp) == LT_IF) + if (eval_unary(ops, valp, &cp) == LT_IF) { + *cpp = cp; return (LT_IF); + } *valp = !*valp; } else if (*cp == '(') { cp++; @@ -700,13 +702,16 @@ eval_unary(const struct ops *ops, int *valp, const char **cpp) return (LT_IF); cp = skipcomment(cp); sym = findsym(cp); - if (sym < 0) - return (LT_IF); - *valp = (value[sym] != NULL); cp = skipsym(cp); cp = skipcomment(cp); if (*cp++ != ')') return (LT_IF); + if (sym >= 0) + *valp = (value[sym] != NULL); + else { + *cpp = cp; + return (LT_IF); + } keepthis = false; } else if (!endsym(*cp)) { debug("eval%d symbol", ops - eval_ops); @@ -741,11 +746,11 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) const struct op *op; const char *cp; int val; + Linetype lhs, rhs; debug("eval%d", ops - eval_ops); cp = *cpp; - if (ops->inner(ops+1, valp, &cp) == LT_IF) - return (LT_IF); + lhs = ops->inner(ops+1, valp, &cp); for (;;) { cp = skipcomment(cp); for (op = ops->op; op->str != NULL; op++) @@ -755,14 +760,32 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) break; cp += strlen(op->str); debug("eval%d %s", ops - eval_ops, op->str); - if (ops->inner(ops+1, &val, &cp) == LT_IF) - return (LT_IF); - *valp = op->fn(*valp, val); + rhs = ops->inner(ops+1, &val, &cp); + if (op->fn == op_and && (lhs == LT_FALSE || rhs == LT_FALSE)) { + debug("eval%d: and always false", ops - eval_ops); + if (lhs == LT_IF) + *valp = val; + lhs = LT_FALSE; + continue; + } + if (op->fn == op_or && (lhs == LT_TRUE || rhs == LT_TRUE)) { + debug("eval%d: or always true", ops - eval_ops); + if (lhs == LT_IF) + *valp = val; + lhs = LT_TRUE; + continue; + } + if (rhs == LT_IF) + lhs = LT_IF; + if (lhs != LT_IF) + *valp = op->fn(*valp, val); } *cpp = cp; debug("eval%d = %d", ops - eval_ops, *valp); - return (*valp ? LT_TRUE : LT_FALSE); + if (lhs != LT_IF) + lhs = (*valp ? LT_TRUE : LT_FALSE); + return lhs; } /* @@ -773,12 +796,15 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) static Linetype ifeval(const char **cpp) { + const char *cp = *cpp; int ret; int val; debug("eval %s", *cpp); keepthis = killconsts ? false : true; - ret = eval_table(eval_ops, &val, cpp); + ret = eval_table(eval_ops, &val, &cp); + if (ret != LT_IF) + *cpp = cp; debug("eval = %d", val); return (keepthis ? LT_IF : ret); } diff --git a/scripts/ver_linux b/scripts/ver_linux index dbb3037..7de36df 100755 --- a/scripts/ver_linux +++ b/scripts/ver_linux @@ -65,7 +65,7 @@ sed -n -e '/^.*\/libc-\([^/]*\)\.so$/{s//\1/;p;q}' < /proc/self/maps ldd -v > /dev/null 2>&1 && ldd -v || ldd --version |head -n 1 | awk \ 'NR==1{print "Dynamic linker (ldd) ", $NF}' -ls -l /usr/lib/lib{g,stdc}++.so 2>/dev/null | awk -F. \ +ls -l /usr/lib/libg++.so /usr/lib/libstdc++.so 2>/dev/null | awk -F. \ '{print "Linux C++ Library " $4"."$5"."$6}' ps --version 2>&1 | grep version | awk \ diff --git a/security/Kconfig b/security/Kconfig index bb24477..d23c839 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -110,28 +110,8 @@ config SECURITY_ROOTPLUG See for more information about this module. - - If you are unsure how to answer this question, answer N. - -config SECURITY_DEFAULT_MMAP_MIN_ADDR - int "Low address space to protect from user allocation" - depends on SECURITY - default 0 - help - This is the portion of low virtual memory which should be protected - from userspace allocation. Keeping a user from writing to low pages - can help reduce the impact of kernel NULL pointer bugs. - - For most ia64, ppc64 and x86 users with lots of address space - a value of 65536 is reasonable and should cause no problems. - On arm and other archs it should not be higher than 32768. - Programs which use vm86 functionality would either need additional - permissions from either the LSM or the capabilities module or have - this protection disabled. - - This value can be changed after boot using the - /proc/sys/vm/mmap_min_addr tunable. + If you are unsure how to answer this question, answer N. source security/selinux/Kconfig source security/smack/Kconfig diff --git a/security/Makefile b/security/Makefile index fa77021..c67557c 100644 --- a/security/Makefile +++ b/security/Makefile @@ -16,6 +16,9 @@ obj-$(CONFIG_SECURITYFS) += inode.o # Must precede capability.o in order to stack properly. obj-$(CONFIG_SECURITY_SELINUX) += selinux/built-in.o obj-$(CONFIG_SECURITY_SMACK) += smack/built-in.o +ifeq ($(CONFIG_AUDIT),y) +obj-$(CONFIG_SECURITY_SMACK) += lsm_audit.o +endif obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o diff --git a/security/commoncap.c b/security/commoncap.c index beac025..48b7e02 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -28,6 +28,28 @@ #include #include +/* + * If a non-root user executes a setuid-root binary in + * !secure(SECURE_NOROOT) mode, then we raise capabilities. + * However if fE is also set, then the intent is for only + * the file capabilities to be applied, and the setuid-root + * bit is left on either to change the uid (plausible) or + * to get full privilege on a kernel without file capabilities + * support. So in that case we do not raise capabilities. + * + * Warn if that happens, once per boot. + */ +static void warn_setuid_and_fcaps_mixed(char *fname) +{ + static int warned; + if (!warned) { + printk(KERN_INFO "warning: `%s' has both setuid-root and" + " effective capabilities. Therefore not raising all" + " capabilities.\n", fname); + warned = 1; + } +} + int cap_netlink_send(struct sock *sk, struct sk_buff *skb) { NETLINK_CB(skb).eff_cap = current_cap(); @@ -464,6 +486,15 @@ int cap_bprm_set_creds(struct linux_binprm *bprm) if (!issecure(SECURE_NOROOT)) { /* + * If the legacy file capability is set, then don't set privs + * for a setuid root binary run by a non-root user. Do set it + * for a root user just to cause least surprise to an admin. + */ + if (effective && new->uid != 0 && new->euid == 0) { + warn_setuid_and_fcaps_mixed(bprm->filename); + goto skip; + } + /* * To support inheritance of root-permissions and suid-root * executables under compatibility mode, we override the * capability sets for the file. @@ -478,6 +509,7 @@ int cap_bprm_set_creds(struct linux_binprm *bprm) if (new->euid == 0) effective = true; } +skip: /* Don't let someone trace a set[ug]id/setpcap binary with the revised * credentials unless they have the appropriate permit diff --git a/security/inode.c b/security/inode.c index f3b91bf..f7496c6 100644 --- a/security/inode.c +++ b/security/inode.c @@ -287,7 +287,7 @@ void securityfs_remove(struct dentry *dentry) { struct dentry *parent; - if (!dentry) + if (!dentry || IS_ERR(dentry)) return; parent = dentry->d_parent; diff --git a/security/integrity/ima/ima_audit.c b/security/integrity/ima/ima_audit.c index 1e082bb..ff513ff 100644 --- a/security/integrity/ima/ima_audit.c +++ b/security/integrity/ima/ima_audit.c @@ -22,18 +22,9 @@ static int ima_audit; static int __init ima_audit_setup(char *str) { unsigned long audit; - int rc, result = 0; - char *op = "ima_audit"; - char *cause; - rc = strict_strtoul(str, 0, &audit); - if (rc || audit > 1) - result = 1; - else - ima_audit = audit; - cause = ima_audit ? "enabled" : "not_enabled"; - integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, NULL, - op, cause, result, 0); + if (!strict_strtoul(str, 0, &audit)) + ima_audit = audit ? 1 : 0; return 1; } __setup("ima_audit=", ima_audit_setup); @@ -50,23 +41,14 @@ void integrity_audit_msg(int audit_msgno, struct inode *inode, ab = audit_log_start(current->audit_context, GFP_KERNEL, audit_msgno); audit_log_format(ab, "integrity: pid=%d uid=%u auid=%u ses=%u", - current->pid, current->cred->uid, + current->pid, current_cred()->uid, audit_get_loginuid(current), audit_get_sessionid(current)); audit_log_task_context(ab); - switch (audit_msgno) { - case AUDIT_INTEGRITY_DATA: - case AUDIT_INTEGRITY_METADATA: - case AUDIT_INTEGRITY_PCR: - case AUDIT_INTEGRITY_STATUS: - audit_log_format(ab, " op=%s cause=%s", op, cause); - break; - case AUDIT_INTEGRITY_HASH: - audit_log_format(ab, " op=%s hash=%s", op, cause); - break; - default: - audit_log_format(ab, " op=%s", op); - } + audit_log_format(ab, " op="); + audit_log_string(ab, op); + audit_log_format(ab, " cause="); + audit_log_string(ab, cause); audit_log_format(ab, " comm="); audit_log_untrustedstring(ab, current->comm); if (fname) { diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c index 50d572b..63003a6 100644 --- a/security/integrity/ima/ima_crypto.c +++ b/security/integrity/ima/ima_crypto.c @@ -103,7 +103,7 @@ int ima_calc_template_hash(int template_len, void *template, char *digest) return rc; } -static void ima_pcrread(int idx, u8 *pcr) +static void __init ima_pcrread(int idx, u8 *pcr) { if (!ima_used_chip) return; @@ -115,7 +115,7 @@ static void ima_pcrread(int idx, u8 *pcr) /* * Calculate the boot aggregate hash */ -int ima_calc_boot_aggregate(char *digest) +int __init ima_calc_boot_aggregate(char *digest) { struct hash_desc desc; struct scatterlist sg; diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c index ffbe259..6bfc7ea 100644 --- a/security/integrity/ima/ima_fs.c +++ b/security/integrity/ima/ima_fs.c @@ -15,6 +15,7 @@ * implemenents security file system for reporting * current measurement list and IMA statistics */ +#include #include #include #include @@ -84,8 +85,8 @@ static void *ima_measurements_next(struct seq_file *m, void *v, loff_t *pos) * against concurrent list-extension */ rcu_read_lock(); - qe = list_entry(rcu_dereference(qe->later.next), - struct ima_queue_entry, later); + qe = list_entry_rcu(qe->later.next, + struct ima_queue_entry, later); rcu_read_unlock(); (*pos)++; @@ -283,6 +284,9 @@ static atomic_t policy_opencount = ATOMIC_INIT(1); */ int ima_open_policy(struct inode * inode, struct file * filp) { + /* No point in being allowed to open it if you aren't going to write */ + if (!(filp->f_flags & O_WRONLY)) + return -EACCES; if (atomic_dec_and_test(&policy_opencount)) return 0; return -EBUSY; @@ -315,7 +319,7 @@ static struct file_operations ima_measure_policy_ops = { .release = ima_release_policy }; -int ima_fs_init(void) +int __init ima_fs_init(void) { ima_dir = securityfs_create_dir("ima", NULL); if (IS_ERR(ima_dir)) @@ -349,7 +353,7 @@ int ima_fs_init(void) goto out; ima_policy = securityfs_create_file("policy", - S_IRUSR | S_IRGRP | S_IWUSR, + S_IWUSR, ima_dir, NULL, &ima_measure_policy_ops); if (IS_ERR(ima_policy)) diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c index ec79f1e..b8dd693 100644 --- a/security/integrity/ima/ima_iint.c +++ b/security/integrity/ima/ima_iint.c @@ -196,7 +196,7 @@ static void init_once(void *foo) kref_set(&iint->refcount, 1); } -void ima_iintcache_init(void) +void __init ima_iintcache_init(void) { iint_cache = kmem_cache_create("iint_cache", sizeof(struct ima_iint_cache), 0, diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c index 0b0bb8c..a40da7a 100644 --- a/security/integrity/ima/ima_init.c +++ b/security/integrity/ima/ima_init.c @@ -38,7 +38,7 @@ int ima_used_chip; * a different value.) Violations add a zero entry to the measurement * list and extend the aggregate PCR value with ff...ff's. */ -static void ima_add_boot_aggregate(void) +static void __init ima_add_boot_aggregate(void) { struct ima_template_entry *entry; const char *op = "add_boot_aggregate"; @@ -71,7 +71,7 @@ err_out: audit_cause, result, 0); } -int ima_init(void) +int __init ima_init(void) { u8 pcr_i[IMA_DIGEST_SIZE]; int rc; diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index f4e7266..6f61187 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -29,20 +29,8 @@ int ima_initialized; char *ima_hash = "sha1"; static int __init hash_setup(char *str) { - const char *op = "hash_setup"; - const char *hash = "sha1"; - int result = 0; - int audit_info = 0; - - if (strncmp(str, "md5", 3) == 0) { - hash = "md5"; - ima_hash = str; - } else if (strncmp(str, "sha1", 4) != 0) { - hash = "invalid_hash_type"; - result = 1; - } - integrity_audit_msg(AUDIT_INTEGRITY_HASH, NULL, NULL, op, hash, - result, audit_info); + if (strncmp(str, "md5", 3) == 0) + ima_hash = "md5"; return 1; } __setup("ima_hash=", hash_setup); @@ -128,10 +116,6 @@ static int get_path_measurement(struct ima_iint_cache *iint, struct file *file, { int rc = 0; - if (IS_ERR(file)) { - pr_info("%s dentry_open failed\n", filename); - return rc; - } iint->opencount++; iint->readcount++; @@ -141,6 +125,15 @@ static int get_path_measurement(struct ima_iint_cache *iint, struct file *file, return rc; } +static void ima_update_counts(struct ima_iint_cache *iint, int mask) +{ + iint->opencount++; + if ((mask & MAY_WRITE) || (mask == 0)) + iint->writecount++; + else if (mask & (MAY_READ | MAY_EXEC)) + iint->readcount++; +} + /** * ima_path_check - based on policy, collect/store measurement. * @path: contains a pointer to the path to be measured @@ -156,10 +149,10 @@ static int get_path_measurement(struct ima_iint_cache *iint, struct file *file, * - Opening a file for read when already open for write, * could result in a file measurement error. * - * Return 0 on success, an error code on failure. - * (Based on the results of appraise_measurement().) + * Always return 0 and audit dentry_open failures. + * (Return code will be based upon measurement appraisal.) */ -int ima_path_check(struct path *path, int mask) +int ima_path_check(struct path *path, int mask, int update_counts) { struct inode *inode = path->dentry->d_inode; struct ima_iint_cache *iint; @@ -173,11 +166,8 @@ int ima_path_check(struct path *path, int mask) return 0; mutex_lock(&iint->mutex); - iint->opencount++; - if ((mask & MAY_WRITE) || (mask == 0)) - iint->writecount++; - else if (mask & (MAY_READ | MAY_EXEC)) - iint->readcount++; + if (update_counts) + ima_update_counts(iint, mask); rc = ima_must_measure(iint, inode, MAY_READ, PATH_CHECK); if (rc < 0) @@ -196,7 +186,19 @@ int ima_path_check(struct path *path, int mask) struct dentry *dentry = dget(path->dentry); struct vfsmount *mnt = mntget(path->mnt); - file = dentry_open(dentry, mnt, O_RDONLY, current->cred); + file = dentry_open(dentry, mnt, O_RDONLY | O_LARGEFILE, + current_cred()); + if (IS_ERR(file)) { + int audit_info = 0; + + integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, + dentry->d_name.name, + "add_measurement", + "dentry_open failed", + 1, audit_info); + file = NULL; + goto out; + } rc = get_path_measurement(iint, file, dentry->d_name.name); } out: @@ -206,6 +208,7 @@ out: kref_put(&iint->refcount, iint_free); return 0; } +EXPORT_SYMBOL_GPL(ima_path_check); static int process_measurement(struct file *file, const unsigned char *filename, int mask, int function) @@ -234,7 +237,16 @@ out: return rc; } -static void opencount_get(struct file *file) +/* + * ima_opens_get - increment file counts + * + * - for IPC shm and shmat file. + * - for nfsd exported files. + * + * Increment the counts for these files to prevent unnecessary + * imbalance messages. + */ +void ima_counts_get(struct file *file) { struct inode *inode = file->f_dentry->d_inode; struct ima_iint_cache *iint; @@ -246,8 +258,14 @@ static void opencount_get(struct file *file) return; mutex_lock(&iint->mutex); iint->opencount++; + if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) + iint->readcount++; + + if (file->f_mode & FMODE_WRITE) + iint->writecount++; mutex_unlock(&iint->mutex); } +EXPORT_SYMBOL_GPL(ima_counts_get); /** * ima_file_mmap - based on policy, collect/store measurement. @@ -272,18 +290,6 @@ int ima_file_mmap(struct file *file, unsigned long prot) return 0; } -/* - * ima_shm_check - IPC shm and shmat create/fput a file - * - * Maintain the opencount for these files to prevent unnecessary - * imbalance messages. - */ -void ima_shm_check(struct file *file) -{ - opencount_get(file); - return; -} - /** * ima_bprm_check - based on policy, collect/store measurement. * @bprm: contains the linux_binprm structure diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c index b5291ad..e127839 100644 --- a/security/integrity/ima/ima_policy.c +++ b/security/integrity/ima/ima_policy.c @@ -45,24 +45,30 @@ struct ima_measure_rule_entry { } lsm[MAX_LSM_RULES]; }; -/* Without LSM specific knowledge, the default policy can only be +/* + * Without LSM specific knowledge, the default policy can only be * written in terms of .action, .func, .mask, .fsmagic, and .uid */ + +/* + * The minimum rule set to allow for full TCB coverage. Measures all files + * opened or mmap for exec and everything read by root. Dangerous because + * normal users can easily run the machine out of memory simply building + * and running executables. + */ static struct ima_measure_rule_entry default_rules[] = { - {.action = DONT_MEASURE,.fsmagic = PROC_SUPER_MAGIC, - .flags = IMA_FSMAGIC}, + {.action = DONT_MEASURE,.fsmagic = PROC_SUPER_MAGIC,.flags = IMA_FSMAGIC}, {.action = DONT_MEASURE,.fsmagic = SYSFS_MAGIC,.flags = IMA_FSMAGIC}, {.action = DONT_MEASURE,.fsmagic = DEBUGFS_MAGIC,.flags = IMA_FSMAGIC}, {.action = DONT_MEASURE,.fsmagic = TMPFS_MAGIC,.flags = IMA_FSMAGIC}, - {.action = DONT_MEASURE,.fsmagic = SECURITYFS_MAGIC, - .flags = IMA_FSMAGIC}, - {.action = DONT_MEASURE,.fsmagic = 0xF97CFF8C,.flags = IMA_FSMAGIC}, + {.action = DONT_MEASURE,.fsmagic = SECURITYFS_MAGIC,.flags = IMA_FSMAGIC}, + {.action = DONT_MEASURE,.fsmagic = SELINUX_MAGIC,.flags = IMA_FSMAGIC}, {.action = MEASURE,.func = FILE_MMAP,.mask = MAY_EXEC, .flags = IMA_FUNC | IMA_MASK}, {.action = MEASURE,.func = BPRM_CHECK,.mask = MAY_EXEC, .flags = IMA_FUNC | IMA_MASK}, {.action = MEASURE,.func = PATH_CHECK,.mask = MAY_READ,.uid = 0, - .flags = IMA_FUNC | IMA_MASK | IMA_UID} + .flags = IMA_FUNC | IMA_MASK | IMA_UID}, }; static LIST_HEAD(measure_default_rules); @@ -71,6 +77,14 @@ static struct list_head *ima_measure; static DEFINE_MUTEX(ima_measure_mutex); +static bool ima_use_tcb __initdata; +static int __init default_policy_setup(char *str) +{ + ima_use_tcb = 1; + return 1; +} +__setup("ima_tcb", default_policy_setup); + /** * ima_match_rules - determine whether an inode matches the measure rule. * @rule: a pointer to a rule @@ -96,7 +110,7 @@ static bool ima_match_rules(struct ima_measure_rule_entry *rule, if ((rule->flags & IMA_UID) && rule->uid != tsk->cred->uid) return false; for (i = 0; i < MAX_LSM_RULES; i++) { - int rc; + int rc = 0; u32 osid, sid; if (!rule->lsm[i].rule) @@ -109,7 +123,7 @@ static bool ima_match_rules(struct ima_measure_rule_entry *rule, security_inode_getsecid(inode, &osid); rc = security_filter_rule_match(osid, rule->lsm[i].type, - AUDIT_EQUAL, + Audit_equal, rule->lsm[i].rule, NULL); break; @@ -119,7 +133,7 @@ static bool ima_match_rules(struct ima_measure_rule_entry *rule, security_task_getsecid(tsk, &sid); rc = security_filter_rule_match(sid, rule->lsm[i].type, - AUDIT_EQUAL, + Audit_equal, rule->lsm[i].rule, NULL); default: @@ -164,11 +178,17 @@ int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask) * ima_measure points to either the measure_default_rules or the * the new measure_policy_rules. */ -void ima_init_policy(void) +void __init ima_init_policy(void) { - int i; + int i, entries; + + /* if !ima_use_tcb set entries = 0 so we load NO default rules */ + if (ima_use_tcb) + entries = ARRAY_SIZE(default_rules); + else + entries = 0; - for (i = 0; i < ARRAY_SIZE(default_rules); i++) + for (i = 0; i < entries; i++) list_add_tail(&default_rules[i].list, &measure_default_rules); ima_measure = &measure_default_rules; } @@ -227,7 +247,7 @@ static int ima_lsm_rule_init(struct ima_measure_rule_entry *entry, entry->lsm[lsm_rule].type = audit_type; result = security_filter_rule_init(entry->lsm[lsm_rule].type, - AUDIT_EQUAL, args, + Audit_equal, args, &entry->lsm[lsm_rule].rule); return result; } diff --git a/security/lsm_audit.c b/security/lsm_audit.c new file mode 100644 index 0000000..94b8684 --- /dev/null +++ b/security/lsm_audit.c @@ -0,0 +1,386 @@ +/* + * common LSM auditing functions + * + * Based on code written for SELinux by : + * Stephen Smalley, + * James Morris + * Author : Etienne Basset, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, + * as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * ipv4_skb_to_auditdata : fill auditdata from skb + * @skb : the skb + * @ad : the audit data to fill + * @proto : the layer 4 protocol + * + * return 0 on success + */ +int ipv4_skb_to_auditdata(struct sk_buff *skb, + struct common_audit_data *ad, u8 *proto) +{ + int ret = 0; + struct iphdr *ih; + + ih = ip_hdr(skb); + if (ih == NULL) + return -EINVAL; + + ad->u.net.v4info.saddr = ih->saddr; + ad->u.net.v4info.daddr = ih->daddr; + + if (proto) + *proto = ih->protocol; + /* non initial fragment */ + if (ntohs(ih->frag_off) & IP_OFFSET) + return 0; + + switch (ih->protocol) { + case IPPROTO_TCP: { + struct tcphdr *th = tcp_hdr(skb); + if (th == NULL) + break; + + ad->u.net.sport = th->source; + ad->u.net.dport = th->dest; + break; + } + case IPPROTO_UDP: { + struct udphdr *uh = udp_hdr(skb); + if (uh == NULL) + break; + + ad->u.net.sport = uh->source; + ad->u.net.dport = uh->dest; + break; + } + case IPPROTO_DCCP: { + struct dccp_hdr *dh = dccp_hdr(skb); + if (dh == NULL) + break; + + ad->u.net.sport = dh->dccph_sport; + ad->u.net.dport = dh->dccph_dport; + break; + } + case IPPROTO_SCTP: { + struct sctphdr *sh = sctp_hdr(skb); + if (sh == NULL) + break; + ad->u.net.sport = sh->source; + ad->u.net.dport = sh->dest; + break; + } + default: + ret = -EINVAL; + } + return ret; +} +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +/** + * ipv6_skb_to_auditdata : fill auditdata from skb + * @skb : the skb + * @ad : the audit data to fill + * @proto : the layer 4 protocol + * + * return 0 on success + */ +int ipv6_skb_to_auditdata(struct sk_buff *skb, + struct common_audit_data *ad, u8 *proto) +{ + int offset, ret = 0; + struct ipv6hdr *ip6; + u8 nexthdr; + + ip6 = ipv6_hdr(skb); + if (ip6 == NULL) + return -EINVAL; + ipv6_addr_copy(&ad->u.net.v6info.saddr, &ip6->saddr); + ipv6_addr_copy(&ad->u.net.v6info.daddr, &ip6->daddr); + ret = 0; + /* IPv6 can have several extension header before the Transport header + * skip them */ + offset = skb_network_offset(skb); + offset += sizeof(*ip6); + nexthdr = ip6->nexthdr; + offset = ipv6_skip_exthdr(skb, offset, &nexthdr); + if (offset < 0) + return 0; + if (proto) + *proto = nexthdr; + switch (nexthdr) { + case IPPROTO_TCP: { + struct tcphdr _tcph, *th; + + th = skb_header_pointer(skb, offset, sizeof(_tcph), &_tcph); + if (th == NULL) + break; + + ad->u.net.sport = th->source; + ad->u.net.dport = th->dest; + break; + } + case IPPROTO_UDP: { + struct udphdr _udph, *uh; + + uh = skb_header_pointer(skb, offset, sizeof(_udph), &_udph); + if (uh == NULL) + break; + + ad->u.net.sport = uh->source; + ad->u.net.dport = uh->dest; + break; + } + case IPPROTO_DCCP: { + struct dccp_hdr _dccph, *dh; + + dh = skb_header_pointer(skb, offset, sizeof(_dccph), &_dccph); + if (dh == NULL) + break; + + ad->u.net.sport = dh->dccph_sport; + ad->u.net.dport = dh->dccph_dport; + break; + } + case IPPROTO_SCTP: { + struct sctphdr _sctph, *sh; + + sh = skb_header_pointer(skb, offset, sizeof(_sctph), &_sctph); + if (sh == NULL) + break; + ad->u.net.sport = sh->source; + ad->u.net.dport = sh->dest; + break; + } + default: + ret = -EINVAL; + } + return ret; +} +#endif + + +static inline void print_ipv6_addr(struct audit_buffer *ab, + struct in6_addr *addr, __be16 port, + char *name1, char *name2) +{ + if (!ipv6_addr_any(addr)) + audit_log_format(ab, " %s=%pI6", name1, addr); + if (port) + audit_log_format(ab, " %s=%d", name2, ntohs(port)); +} + +static inline void print_ipv4_addr(struct audit_buffer *ab, __be32 addr, + __be16 port, char *name1, char *name2) +{ + if (addr) + audit_log_format(ab, " %s=%pI4", name1, &addr); + if (port) + audit_log_format(ab, " %s=%d", name2, ntohs(port)); +} + +/** + * dump_common_audit_data - helper to dump common audit data + * @a : common audit data + * + */ +static void dump_common_audit_data(struct audit_buffer *ab, + struct common_audit_data *a) +{ + struct inode *inode = NULL; + struct task_struct *tsk = current; + + if (a->tsk) + tsk = a->tsk; + if (tsk && tsk->pid) { + audit_log_format(ab, " pid=%d comm=", tsk->pid); + audit_log_untrustedstring(ab, tsk->comm); + } + + switch (a->type) { + case LSM_AUDIT_DATA_IPC: + audit_log_format(ab, " key=%d ", a->u.ipc_id); + break; + case LSM_AUDIT_DATA_CAP: + audit_log_format(ab, " capability=%d ", a->u.cap); + break; + case LSM_AUDIT_DATA_FS: + if (a->u.fs.path.dentry) { + struct dentry *dentry = a->u.fs.path.dentry; + if (a->u.fs.path.mnt) { + audit_log_d_path(ab, "path=", &a->u.fs.path); + } else { + audit_log_format(ab, " name="); + audit_log_untrustedstring(ab, + dentry->d_name.name); + } + inode = dentry->d_inode; + } else if (a->u.fs.inode) { + struct dentry *dentry; + inode = a->u.fs.inode; + dentry = d_find_alias(inode); + if (dentry) { + audit_log_format(ab, " name="); + audit_log_untrustedstring(ab, + dentry->d_name.name); + dput(dentry); + } + } + if (inode) + audit_log_format(ab, " dev=%s ino=%lu", + inode->i_sb->s_id, + inode->i_ino); + break; + case LSM_AUDIT_DATA_TASK: + tsk = a->u.tsk; + if (tsk && tsk->pid) { + audit_log_format(ab, " pid=%d comm=", tsk->pid); + audit_log_untrustedstring(ab, tsk->comm); + } + break; + case LSM_AUDIT_DATA_NET: + if (a->u.net.sk) { + struct sock *sk = a->u.net.sk; + struct unix_sock *u; + int len = 0; + char *p = NULL; + + switch (sk->sk_family) { + case AF_INET: { + struct inet_sock *inet = inet_sk(sk); + + print_ipv4_addr(ab, inet->rcv_saddr, + inet->sport, + "laddr", "lport"); + print_ipv4_addr(ab, inet->daddr, + inet->dport, + "faddr", "fport"); + break; + } + case AF_INET6: { + struct inet_sock *inet = inet_sk(sk); + struct ipv6_pinfo *inet6 = inet6_sk(sk); + + print_ipv6_addr(ab, &inet6->rcv_saddr, + inet->sport, + "laddr", "lport"); + print_ipv6_addr(ab, &inet6->daddr, + inet->dport, + "faddr", "fport"); + break; + } + case AF_UNIX: + u = unix_sk(sk); + if (u->dentry) { + struct path path = { + .dentry = u->dentry, + .mnt = u->mnt + }; + audit_log_d_path(ab, "path=", &path); + break; + } + if (!u->addr) + break; + len = u->addr->len-sizeof(short); + p = &u->addr->name->sun_path[0]; + audit_log_format(ab, " path="); + if (*p) + audit_log_untrustedstring(ab, p); + else + audit_log_n_hex(ab, p, len); + break; + } + } + + switch (a->u.net.family) { + case AF_INET: + print_ipv4_addr(ab, a->u.net.v4info.saddr, + a->u.net.sport, + "saddr", "src"); + print_ipv4_addr(ab, a->u.net.v4info.daddr, + a->u.net.dport, + "daddr", "dest"); + break; + case AF_INET6: + print_ipv6_addr(ab, &a->u.net.v6info.saddr, + a->u.net.sport, + "saddr", "src"); + print_ipv6_addr(ab, &a->u.net.v6info.daddr, + a->u.net.dport, + "daddr", "dest"); + break; + } + if (a->u.net.netif > 0) { + struct net_device *dev; + + /* NOTE: we always use init's namespace */ + dev = dev_get_by_index(&init_net, a->u.net.netif); + if (dev) { + audit_log_format(ab, " netif=%s", dev->name); + dev_put(dev); + } + } + break; +#ifdef CONFIG_KEYS + case LSM_AUDIT_DATA_KEY: + audit_log_format(ab, " key_serial=%u", a->u.key_struct.key); + if (a->u.key_struct.key_desc) { + audit_log_format(ab, " key_desc="); + audit_log_untrustedstring(ab, a->u.key_struct.key_desc); + } + break; +#endif + } /* switch (a->type) */ +} + +/** + * common_lsm_audit - generic LSM auditing function + * @a: auxiliary audit data + * + * setup the audit buffer for common security information + * uses callback to print LSM specific information + */ +void common_lsm_audit(struct common_audit_data *a) +{ + struct audit_buffer *ab; + + if (a == NULL) + return; + /* we use GFP_ATOMIC so we won't sleep */ + ab = audit_log_start(current->audit_context, GFP_ATOMIC, AUDIT_AVC); + + if (ab == NULL) + return; + + if (a->lsm_pre_audit) + a->lsm_pre_audit(ab, a); + + dump_common_audit_data(ab, a); + + if (a->lsm_post_audit) + a->lsm_post_audit(ab, a); + + audit_log_end(ab); +} diff --git a/security/root_plug.c b/security/root_plug.c index 40fb4f1..2f7ffa6 100644 --- a/security/root_plug.c +++ b/security/root_plug.c @@ -71,18 +71,6 @@ static int rootplug_bprm_check_security (struct linux_binprm *bprm) } static struct security_operations rootplug_security_ops = { - /* Use the capability functions for some of the hooks */ - .ptrace_may_access = cap_ptrace_may_access, - .ptrace_traceme = cap_ptrace_traceme, - .capget = cap_capget, - .capset = cap_capset, - .capable = cap_capable, - - .bprm_set_creds = cap_bprm_set_creds, - - .task_fix_setuid = cap_task_fix_setuid, - .task_prctl = cap_task_prctl, - .bprm_check_security = rootplug_bprm_check_security, }; diff --git a/security/security.c b/security/security.c index 5284255..dc7674f 100644 --- a/security/security.c +++ b/security/security.c @@ -26,9 +26,6 @@ extern void security_fixup_ops(struct security_operations *ops); struct security_operations *security_ops; /* Initialized to NULL */ -/* amount of vm to protect from userspace access */ -unsigned long mmap_min_addr = CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR; - static inline int verify(struct security_operations *ops) { /* verify the security_operations structure exists */ diff --git a/security/selinux/avc.c b/security/selinux/avc.c index 7f9b5fa..b2ab608 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -927,7 +927,7 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid, if (denied) { if (flags & AVC_STRICT) rc = -EACCES; - else if (!selinux_enforcing || security_permissive_sid(ssid)) + else if (!selinux_enforcing || (avd->flags & AVD_FLAGS_PERMISSIVE)) avc_update_node(AVC_CALLBACK_GRANT, requested, ssid, tsid, tclass, avd->seqno); else diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 2fcad7c..15c2a08 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1980,10 +1980,6 @@ static int selinux_sysctl(ctl_table *table, int op) u32 tsid, sid; int rc; - rc = secondary_ops->sysctl(table, op); - if (rc) - return rc; - sid = current_sid(); rc = selinux_sysctl_get_sid(table, (op == 0001) ? @@ -2375,10 +2371,8 @@ static void selinux_bprm_committed_creds(struct linux_binprm *bprm) { const struct task_security_struct *tsec = current_security(); struct itimerval itimer; - struct sighand_struct *psig; u32 osid, sid; int rc, i; - unsigned long flags; osid = tsec->osid; sid = tsec->sid; @@ -2398,22 +2392,20 @@ static void selinux_bprm_committed_creds(struct linux_binprm *bprm) memset(&itimer, 0, sizeof itimer); for (i = 0; i < 3; i++) do_setitimer(i, &itimer, NULL); - flush_signals(current); spin_lock_irq(¤t->sighand->siglock); - flush_signal_handlers(current, 1); - sigemptyset(¤t->blocked); - recalc_sigpending(); + if (!(current->signal->flags & SIGNAL_GROUP_EXIT)) { + __flush_signals(current); + flush_signal_handlers(current, 1); + sigemptyset(¤t->blocked); + } spin_unlock_irq(¤t->sighand->siglock); } /* Wake up the parent if it is waiting so that it can recheck * wait permission to the new task SID. */ - read_lock_irq(&tasklist_lock); - psig = current->parent->sighand; - spin_lock_irqsave(&psig->siglock, flags); - wake_up_interruptible(¤t->parent->signal->wait_chldexit); - spin_unlock_irqrestore(&psig->siglock, flags); - read_unlock_irq(&tasklist_lock); + read_lock(&tasklist_lock); + wake_up_interruptible(¤t->real_parent->signal->wait_chldexit); + read_unlock(&tasklist_lock); } /* superblock security operations */ @@ -4503,7 +4495,7 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex, * when the packet is on it's final way out. * NOTE: there appear to be some IPv6 multicast cases where skb->dst * is NULL, in this case go ahead and apply access control. */ - if (skb->dst != NULL && skb->dst->xfrm != NULL) + if (skb_dst(skb) != NULL && skb_dst(skb)->xfrm != NULL) return NF_ACCEPT; #endif secmark_active = selinux_secmark_enabled(); diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h index 5c3434f..ca83579 100644 --- a/security/selinux/include/security.h +++ b/security/selinux/include/security.h @@ -8,14 +8,13 @@ #ifndef _SELINUX_SECURITY_H_ #define _SELINUX_SECURITY_H_ +#include #include "flask.h" #define SECSID_NULL 0x00000000 /* unspecified SID */ #define SECSID_WILD 0xffffffff /* wildcard SID */ #define SECCLASS_NULL 0x0000 /* no class */ -#define SELINUX_MAGIC 0xf97cff8c - /* Identify specific policy version changes */ #define POLICYDB_VERSION_BASE 15 #define POLICYDB_VERSION_BOOL 16 @@ -91,9 +90,11 @@ struct av_decision { u32 auditallow; u32 auditdeny; u32 seqno; + u32 flags; }; -int security_permissive_sid(u32 sid); +/* definitions of av_decision.flags */ +#define AVD_FLAGS_PERMISSIVE 0x0001 int security_compute_av(u32 ssid, u32 tsid, u16 tclass, u32 requested, diff --git a/security/selinux/nlmsgtab.c b/security/selinux/nlmsgtab.c index c6875fd..dd7cc6d 100644 --- a/security/selinux/nlmsgtab.c +++ b/security/selinux/nlmsgtab.c @@ -112,6 +112,8 @@ static struct nlmsg_perm nlmsg_audit_perms[] = { AUDIT_DEL_RULE, NETLINK_AUDIT_SOCKET__NLMSG_WRITE }, { AUDIT_USER, NETLINK_AUDIT_SOCKET__NLMSG_RELAY }, { AUDIT_SIGNAL_INFO, NETLINK_AUDIT_SOCKET__NLMSG_READ }, + { AUDIT_TRIM, NETLINK_AUDIT_SOCKET__NLMSG_WRITE }, + { AUDIT_MAKE_EQUIV, NETLINK_AUDIT_SOCKET__NLMSG_WRITE }, { AUDIT_TTY_GET, NETLINK_AUDIT_SOCKET__NLMSG_READ }, { AUDIT_TTY_SET, NETLINK_AUDIT_SOCKET__NLMSG_TTY_AUDIT }, }; diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index 2d5136e..b4fc506 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -527,10 +527,10 @@ static ssize_t sel_write_access(struct file *file, char *buf, size_t size) goto out2; length = scnprintf(buf, SIMPLE_TRANSACTION_LIMIT, - "%x %x %x %x %u", + "%x %x %x %x %u %x", avd.allowed, 0xffffffff, avd.auditallow, avd.auditdeny, - avd.seqno); + avd.seqno, avd.flags); out2: kfree(tcon); out: @@ -803,10 +803,6 @@ static ssize_t sel_read_bool(struct file *filep, char __user *buf, goto out; } - if (count > PAGE_SIZE) { - ret = -EINVAL; - goto out; - } page = (char *)get_zeroed_page(GFP_KERNEL); if (!page) { ret = -ENOMEM; diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index deeec6c..500e6f7 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -410,6 +410,7 @@ static int context_struct_compute_av(struct context *scontext, avd->auditallow = 0; avd->auditdeny = 0xffffffff; avd->seqno = latest_granting; + avd->flags = 0; /* * Check for all the invalid cases. @@ -528,31 +529,6 @@ inval_class: return 0; } -/* - * Given a sid find if the type has the permissive flag set - */ -int security_permissive_sid(u32 sid) -{ - struct context *context; - u32 type; - int rc; - - read_lock(&policy_rwlock); - - context = sidtab_search(&sidtab, sid); - BUG_ON(!context); - - type = context->type; - /* - * we are intentionally using type here, not type-1, the 0th bit may - * someday indicate that we are globally setting permissive in policy. - */ - rc = ebitmap_get_bit(&policydb.permissive_map, type); - - read_unlock(&policy_rwlock); - return rc; -} - static int security_validtrans_handle_fail(struct context *ocontext, struct context *ncontext, struct context *tcontext, @@ -767,6 +743,10 @@ int security_compute_av(u32 ssid, rc = context_struct_compute_av(scontext, tcontext, tclass, requested, avd); + + /* permissive domain? */ + if (ebitmap_get_bit(&policydb.permissive_map, scontext->type)) + avd->flags |= AVD_FLAGS_PERMISSIVE; out: read_unlock(&policy_rwlock); return rc; diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c index c0eb720..72b1845 100644 --- a/security/selinux/xfrm.c +++ b/security/selinux/xfrm.c @@ -447,7 +447,7 @@ int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb, struct dst_entry *dst; int rc = 0; - dst = skb->dst; + dst = skb_dst(skb); if (dst) { struct dst_entry *dst_test; diff --git a/security/smack/smack.h b/security/smack/smack.h index 42ef313..243bec1 100644 --- a/security/smack/smack.h +++ b/security/smack/smack.h @@ -20,6 +20,7 @@ #include #include #include +#include /* * Why 23? CIPSO is constrained to 30, so a 32 byte buffer is @@ -179,6 +180,20 @@ struct smack_known { #define MAY_NOT 0 /* + * Number of access types used by Smack (rwxa) + */ +#define SMK_NUM_ACCESS_TYPE 4 + +/* + * Smack audit data; is empty if CONFIG_AUDIT not set + * to save some stack + */ +struct smk_audit_info { +#ifdef CONFIG_AUDIT + struct common_audit_data a; +#endif +}; +/* * These functions are in smack_lsm.c */ struct inode_smack *new_inode_smack(char *); @@ -186,8 +201,8 @@ struct inode_smack *new_inode_smack(char *); /* * These functions are in smack_access.c */ -int smk_access(char *, char *, int); -int smk_curacc(char *, u32); +int smk_access(char *, char *, int, struct smk_audit_info *); +int smk_curacc(char *, u32, struct smk_audit_info *); int smack_to_cipso(const char *, struct smack_cipso *); void smack_from_cipso(u32, char *, char *); char *smack_from_secid(const u32); @@ -237,4 +252,93 @@ static inline char *smk_of_inode(const struct inode *isp) return sip->smk_inode; } +/* + * logging functions + */ +#define SMACK_AUDIT_DENIED 0x1 +#define SMACK_AUDIT_ACCEPT 0x2 +extern int log_policy; + +void smack_log(char *subject_label, char *object_label, + int request, + int result, struct smk_audit_info *auditdata); + +#ifdef CONFIG_AUDIT + +/* + * some inline functions to set up audit data + * they do nothing if CONFIG_AUDIT is not set + * + */ +static inline void smk_ad_init(struct smk_audit_info *a, const char *func, + char type) +{ + memset(a, 0, sizeof(*a)); + a->a.type = type; + a->a.function = func; +} + +static inline void smk_ad_setfield_u_tsk(struct smk_audit_info *a, + struct task_struct *t) +{ + a->a.u.tsk = t; +} +static inline void smk_ad_setfield_u_fs_path_dentry(struct smk_audit_info *a, + struct dentry *d) +{ + a->a.u.fs.path.dentry = d; +} +static inline void smk_ad_setfield_u_fs_path_mnt(struct smk_audit_info *a, + struct vfsmount *m) +{ + a->a.u.fs.path.mnt = m; +} +static inline void smk_ad_setfield_u_fs_inode(struct smk_audit_info *a, + struct inode *i) +{ + a->a.u.fs.inode = i; +} +static inline void smk_ad_setfield_u_fs_path(struct smk_audit_info *a, + struct path p) +{ + a->a.u.fs.path = p; +} +static inline void smk_ad_setfield_u_net_sk(struct smk_audit_info *a, + struct sock *sk) +{ + a->a.u.net.sk = sk; +} + +#else /* no AUDIT */ + +static inline void smk_ad_init(struct smk_audit_info *a, const char *func, + char type) +{ +} +static inline void smk_ad_setfield_u_tsk(struct smk_audit_info *a, + struct task_struct *t) +{ +} +static inline void smk_ad_setfield_u_fs_path_dentry(struct smk_audit_info *a, + struct dentry *d) +{ +} +static inline void smk_ad_setfield_u_fs_path_mnt(struct smk_audit_info *a, + struct vfsmount *m) +{ +} +static inline void smk_ad_setfield_u_fs_inode(struct smk_audit_info *a, + struct inode *i) +{ +} +static inline void smk_ad_setfield_u_fs_path(struct smk_audit_info *a, + struct path p) +{ +} +static inline void smk_ad_setfield_u_net_sk(struct smk_audit_info *a, + struct sock *sk) +{ +} +#endif + #endif /* _SECURITY_SMACK_H */ diff --git a/security/smack/smack_access.c b/security/smack/smack_access.c index ac0a270..513dc1a 100644 --- a/security/smack/smack_access.c +++ b/security/smack/smack_access.c @@ -59,11 +59,18 @@ LIST_HEAD(smack_known_list); */ static u32 smack_next_secid = 10; +/* + * what events do we log + * can be overwritten at run-time by /smack/logging + */ +int log_policy = SMACK_AUDIT_DENIED; + /** * smk_access - determine if a subject has a specific access to an object * @subject_label: a pointer to the subject's Smack label * @object_label: a pointer to the object's Smack label * @request: the access requested, in "MAY" format + * @a : a pointer to the audit data * * This function looks up the subject/object pair in the * access rule list and returns 0 if the access is permitted, @@ -78,10 +85,12 @@ static u32 smack_next_secid = 10; * will be on the list, so checking the pointers may be a worthwhile * optimization. */ -int smk_access(char *subject_label, char *object_label, int request) +int smk_access(char *subject_label, char *object_label, int request, + struct smk_audit_info *a) { u32 may = MAY_NOT; struct smack_rule *srp; + int rc = 0; /* * Hardcoded comparisons. @@ -89,8 +98,10 @@ int smk_access(char *subject_label, char *object_label, int request) * A star subject can't access any object. */ if (subject_label == smack_known_star.smk_known || - strcmp(subject_label, smack_known_star.smk_known) == 0) - return -EACCES; + strcmp(subject_label, smack_known_star.smk_known) == 0) { + rc = -EACCES; + goto out_audit; + } /* * An internet object can be accessed by any subject. * Tasks cannot be assigned the internet label. @@ -100,20 +111,20 @@ int smk_access(char *subject_label, char *object_label, int request) subject_label == smack_known_web.smk_known || strcmp(object_label, smack_known_web.smk_known) == 0 || strcmp(subject_label, smack_known_web.smk_known) == 0) - return 0; + goto out_audit; /* * A star object can be accessed by any subject. */ if (object_label == smack_known_star.smk_known || strcmp(object_label, smack_known_star.smk_known) == 0) - return 0; + goto out_audit; /* * An object can be accessed in any way by a subject * with the same label. */ if (subject_label == object_label || strcmp(subject_label, object_label) == 0) - return 0; + goto out_audit; /* * A hat subject can read any object. * A floor object can be read by any subject. @@ -121,10 +132,10 @@ int smk_access(char *subject_label, char *object_label, int request) if ((request & MAY_ANYREAD) == request) { if (object_label == smack_known_floor.smk_known || strcmp(object_label, smack_known_floor.smk_known) == 0) - return 0; + goto out_audit; if (subject_label == smack_known_hat.smk_known || strcmp(subject_label, smack_known_hat.smk_known) == 0) - return 0; + goto out_audit; } /* * Beyond here an explicit relationship is required. @@ -148,28 +159,36 @@ int smk_access(char *subject_label, char *object_label, int request) * This is a bit map operation. */ if ((request & may) == request) - return 0; - - return -EACCES; + goto out_audit; + + rc = -EACCES; +out_audit: +#ifdef CONFIG_AUDIT + if (a) + smack_log(subject_label, object_label, request, rc, a); +#endif + return rc; } /** * smk_curacc - determine if current has a specific access to an object * @obj_label: a pointer to the object's Smack label * @mode: the access requested, in "MAY" format + * @a : common audit data * * This function checks the current subject label/object label pair * in the access rule list and returns 0 if the access is permitted, * non zero otherwise. It allows that current may have the capability * to override the rules. */ -int smk_curacc(char *obj_label, u32 mode) +int smk_curacc(char *obj_label, u32 mode, struct smk_audit_info *a) { int rc; + char *sp = current_security(); - rc = smk_access(current_security(), obj_label, mode); + rc = smk_access(sp, obj_label, mode, NULL); if (rc == 0) - return 0; + goto out_audit; /* * Return if a specific label has been designated as the @@ -177,14 +196,105 @@ int smk_curacc(char *obj_label, u32 mode) * have that label. */ if (smack_onlycap != NULL && smack_onlycap != current->cred->security) - return rc; + goto out_audit; if (capable(CAP_MAC_OVERRIDE)) return 0; +out_audit: +#ifdef CONFIG_AUDIT + if (a) + smack_log(sp, obj_label, mode, rc, a); +#endif return rc; } +#ifdef CONFIG_AUDIT +/** + * smack_str_from_perm : helper to transalate an int to a + * readable string + * @string : the string to fill + * @access : the int + * + */ +static inline void smack_str_from_perm(char *string, int access) +{ + int i = 0; + if (access & MAY_READ) + string[i++] = 'r'; + if (access & MAY_WRITE) + string[i++] = 'w'; + if (access & MAY_EXEC) + string[i++] = 'x'; + if (access & MAY_APPEND) + string[i++] = 'a'; + string[i] = '\0'; +} +/** + * smack_log_callback - SMACK specific information + * will be called by generic audit code + * @ab : the audit_buffer + * @a : audit_data + * + */ +static void smack_log_callback(struct audit_buffer *ab, void *a) +{ + struct common_audit_data *ad = a; + struct smack_audit_data *sad = &ad->lsm_priv.smack_audit_data; + audit_log_format(ab, "lsm=SMACK fn=%s action=%s", ad->function, + sad->result ? "denied" : "granted"); + audit_log_format(ab, " subject="); + audit_log_untrustedstring(ab, sad->subject); + audit_log_format(ab, " object="); + audit_log_untrustedstring(ab, sad->object); + audit_log_format(ab, " requested=%s", sad->request); +} + +/** + * smack_log - Audit the granting or denial of permissions. + * @subject_label : smack label of the requester + * @object_label : smack label of the object being accessed + * @request: requested permissions + * @result: result from smk_access + * @a: auxiliary audit data + * + * Audit the granting or denial of permissions in accordance + * with the policy. + */ +void smack_log(char *subject_label, char *object_label, int request, + int result, struct smk_audit_info *ad) +{ + char request_buffer[SMK_NUM_ACCESS_TYPE + 1]; + struct smack_audit_data *sad; + struct common_audit_data *a = &ad->a; + + /* check if we have to log the current event */ + if (result != 0 && (log_policy & SMACK_AUDIT_DENIED) == 0) + return; + if (result == 0 && (log_policy & SMACK_AUDIT_ACCEPT) == 0) + return; + + if (a->function == NULL) + a->function = "unknown"; + + /* end preparing the audit data */ + sad = &a->lsm_priv.smack_audit_data; + smack_str_from_perm(request_buffer, request); + sad->subject = subject_label; + sad->object = object_label; + sad->request = request_buffer; + sad->result = result; + a->lsm_pre_audit = smack_log_callback; + + common_lsm_audit(a); +} +#else /* #ifdef CONFIG_AUDIT */ +void smack_log(char *subject_label, char *object_label, int request, + int result, struct smk_audit_info *ad) +{ +} +#endif + static DEFINE_MUTEX(smack_known_lock); /** @@ -209,7 +319,8 @@ struct smack_known *smk_import_entry(const char *string, int len) if (found) smack[i] = '\0'; else if (i >= len || string[i] > '~' || string[i] <= ' ' || - string[i] == '/') { + string[i] == '/' || string[i] == '"' || + string[i] == '\\' || string[i] == '\'') { smack[i] = '\0'; found = 1; } else diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 98b3195..0023182 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -30,7 +30,6 @@ #include #include #include - #include "smack.h" #define task_security(task) (task_cred_xxx((task), security)) @@ -103,14 +102,24 @@ struct inode_smack *new_inode_smack(char *smack) static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode) { int rc; + struct smk_audit_info ad; + char *sp, *tsp; rc = cap_ptrace_may_access(ctp, mode); if (rc != 0) return rc; - rc = smk_access(current_security(), task_security(ctp), MAY_READWRITE); + sp = current_security(); + tsp = task_security(ctp); + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK); + smk_ad_setfield_u_tsk(&ad, ctp); + + /* we won't log here, because rc can be overriden */ + rc = smk_access(sp, tsp, MAY_READWRITE, NULL); if (rc != 0 && capable(CAP_MAC_OVERRIDE)) - return 0; + rc = 0; + + smack_log(sp, tsp, MAY_READWRITE, rc, &ad); return rc; } @@ -125,14 +134,24 @@ static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode) static int smack_ptrace_traceme(struct task_struct *ptp) { int rc; + struct smk_audit_info ad; + char *sp, *tsp; rc = cap_ptrace_traceme(ptp); if (rc != 0) return rc; - rc = smk_access(task_security(ptp), current_security(), MAY_READWRITE); + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK); + smk_ad_setfield_u_tsk(&ad, ptp); + + sp = current_security(); + tsp = task_security(ptp); + /* we won't log here, because rc can be overriden */ + rc = smk_access(tsp, sp, MAY_READWRITE, NULL); if (rc != 0 && has_capability(ptp, CAP_MAC_OVERRIDE)) - return 0; + rc = 0; + + smack_log(tsp, sp, MAY_READWRITE, rc, &ad); return rc; } @@ -327,8 +346,14 @@ static int smack_sb_kern_mount(struct super_block *sb, int flags, void *data) static int smack_sb_statfs(struct dentry *dentry) { struct superblock_smack *sbp = dentry->d_sb->s_security; + int rc; + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, dentry); - return smk_curacc(sbp->smk_floor, MAY_READ); + rc = smk_curacc(sbp->smk_floor, MAY_READ, &ad); + return rc; } /** @@ -346,8 +371,12 @@ static int smack_sb_mount(char *dev_name, struct path *path, char *type, unsigned long flags, void *data) { struct superblock_smack *sbp = path->mnt->mnt_sb->s_security; + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path(&ad, *path); - return smk_curacc(sbp->smk_floor, MAY_WRITE); + return smk_curacc(sbp->smk_floor, MAY_WRITE, &ad); } /** @@ -361,10 +390,14 @@ static int smack_sb_mount(char *dev_name, struct path *path, static int smack_sb_umount(struct vfsmount *mnt, int flags) { struct superblock_smack *sbp; + struct smk_audit_info ad; - sbp = mnt->mnt_sb->s_security; + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, mnt->mnt_mountpoint); + smk_ad_setfield_u_fs_path_mnt(&ad, mnt); - return smk_curacc(sbp->smk_floor, MAY_WRITE); + sbp = mnt->mnt_sb->s_security; + return smk_curacc(sbp->smk_floor, MAY_WRITE, &ad); } /* @@ -441,15 +474,20 @@ static int smack_inode_init_security(struct inode *inode, struct inode *dir, static int smack_inode_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_dentry) { - int rc; char *isp; + struct smk_audit_info ad; + int rc; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, old_dentry); isp = smk_of_inode(old_dentry->d_inode); - rc = smk_curacc(isp, MAY_WRITE); + rc = smk_curacc(isp, MAY_WRITE, &ad); if (rc == 0 && new_dentry->d_inode != NULL) { isp = smk_of_inode(new_dentry->d_inode); - rc = smk_curacc(isp, MAY_WRITE); + smk_ad_setfield_u_fs_path_dentry(&ad, new_dentry); + rc = smk_curacc(isp, MAY_WRITE, &ad); } return rc; @@ -466,18 +504,24 @@ static int smack_inode_link(struct dentry *old_dentry, struct inode *dir, static int smack_inode_unlink(struct inode *dir, struct dentry *dentry) { struct inode *ip = dentry->d_inode; + struct smk_audit_info ad; int rc; + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, dentry); + /* * You need write access to the thing you're unlinking */ - rc = smk_curacc(smk_of_inode(ip), MAY_WRITE); - if (rc == 0) + rc = smk_curacc(smk_of_inode(ip), MAY_WRITE, &ad); + if (rc == 0) { /* * You also need write access to the containing directory */ - rc = smk_curacc(smk_of_inode(dir), MAY_WRITE); - + smk_ad_setfield_u_fs_path_dentry(&ad, NULL); + smk_ad_setfield_u_fs_inode(&ad, dir); + rc = smk_curacc(smk_of_inode(dir), MAY_WRITE, &ad); + } return rc; } @@ -491,17 +535,24 @@ static int smack_inode_unlink(struct inode *dir, struct dentry *dentry) */ static int smack_inode_rmdir(struct inode *dir, struct dentry *dentry) { + struct smk_audit_info ad; int rc; + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, dentry); + /* * You need write access to the thing you're removing */ - rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE); - if (rc == 0) + rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE, &ad); + if (rc == 0) { /* * You also need write access to the containing directory */ - rc = smk_curacc(smk_of_inode(dir), MAY_WRITE); + smk_ad_setfield_u_fs_path_dentry(&ad, NULL); + smk_ad_setfield_u_fs_inode(&ad, dir); + rc = smk_curacc(smk_of_inode(dir), MAY_WRITE, &ad); + } return rc; } @@ -525,15 +576,19 @@ static int smack_inode_rename(struct inode *old_inode, { int rc; char *isp; + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, old_dentry); isp = smk_of_inode(old_dentry->d_inode); - rc = smk_curacc(isp, MAY_READWRITE); + rc = smk_curacc(isp, MAY_READWRITE, &ad); if (rc == 0 && new_dentry->d_inode != NULL) { isp = smk_of_inode(new_dentry->d_inode); - rc = smk_curacc(isp, MAY_READWRITE); + smk_ad_setfield_u_fs_path_dentry(&ad, new_dentry); + rc = smk_curacc(isp, MAY_READWRITE, &ad); } - return rc; } @@ -548,13 +603,15 @@ static int smack_inode_rename(struct inode *old_inode, */ static int smack_inode_permission(struct inode *inode, int mask) { + struct smk_audit_info ad; /* * No permission to check. Existence test. Yup, it's there. */ if (mask == 0) return 0; - - return smk_curacc(smk_of_inode(inode), mask); + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_inode(&ad, inode); + return smk_curacc(smk_of_inode(inode), mask, &ad); } /** @@ -566,13 +623,16 @@ static int smack_inode_permission(struct inode *inode, int mask) */ static int smack_inode_setattr(struct dentry *dentry, struct iattr *iattr) { + struct smk_audit_info ad; /* * Need to allow for clearing the setuid bit. */ if (iattr->ia_valid & ATTR_FORCE) return 0; + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, dentry); - return smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE); + return smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE, &ad); } /** @@ -584,7 +644,12 @@ static int smack_inode_setattr(struct dentry *dentry, struct iattr *iattr) */ static int smack_inode_getattr(struct vfsmount *mnt, struct dentry *dentry) { - return smk_curacc(smk_of_inode(dentry->d_inode), MAY_READ); + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, dentry); + smk_ad_setfield_u_fs_path_mnt(&ad, mnt); + return smk_curacc(smk_of_inode(dentry->d_inode), MAY_READ, &ad); } /** @@ -602,6 +667,7 @@ static int smack_inode_getattr(struct vfsmount *mnt, struct dentry *dentry) static int smack_inode_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags) { + struct smk_audit_info ad; int rc = 0; if (strcmp(name, XATTR_NAME_SMACK) == 0 || @@ -619,8 +685,11 @@ static int smack_inode_setxattr(struct dentry *dentry, const char *name, } else rc = cap_inode_setxattr(dentry, name, value, size, flags); + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, dentry); + if (rc == 0) - rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE); + rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE, &ad); return rc; } @@ -672,7 +741,12 @@ static void smack_inode_post_setxattr(struct dentry *dentry, const char *name, */ static int smack_inode_getxattr(struct dentry *dentry, const char *name) { - return smk_curacc(smk_of_inode(dentry->d_inode), MAY_READ); + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, dentry); + + return smk_curacc(smk_of_inode(dentry->d_inode), MAY_READ, &ad); } /* @@ -686,6 +760,7 @@ static int smack_inode_getxattr(struct dentry *dentry, const char *name) */ static int smack_inode_removexattr(struct dentry *dentry, const char *name) { + struct smk_audit_info ad; int rc = 0; if (strcmp(name, XATTR_NAME_SMACK) == 0 || @@ -696,8 +771,10 @@ static int smack_inode_removexattr(struct dentry *dentry, const char *name) } else rc = cap_inode_removexattr(dentry, name); + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, dentry); if (rc == 0) - rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE); + rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE, &ad); return rc; } @@ -856,12 +933,16 @@ static int smack_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int rc = 0; + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path(&ad, file->f_path); if (_IOC_DIR(cmd) & _IOC_WRITE) - rc = smk_curacc(file->f_security, MAY_WRITE); + rc = smk_curacc(file->f_security, MAY_WRITE, &ad); if (rc == 0 && (_IOC_DIR(cmd) & _IOC_READ)) - rc = smk_curacc(file->f_security, MAY_READ); + rc = smk_curacc(file->f_security, MAY_READ, &ad); return rc; } @@ -875,7 +956,11 @@ static int smack_file_ioctl(struct file *file, unsigned int cmd, */ static int smack_file_lock(struct file *file, unsigned int cmd) { - return smk_curacc(file->f_security, MAY_WRITE); + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path_dentry(&ad, file->f_path.dentry); + return smk_curacc(file->f_security, MAY_WRITE, &ad); } /** @@ -889,8 +974,12 @@ static int smack_file_lock(struct file *file, unsigned int cmd) static int smack_file_fcntl(struct file *file, unsigned int cmd, unsigned long arg) { + struct smk_audit_info ad; int rc; + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS); + smk_ad_setfield_u_fs_path(&ad, file->f_path); + switch (cmd) { case F_DUPFD: case F_GETFD: @@ -898,7 +987,7 @@ static int smack_file_fcntl(struct file *file, unsigned int cmd, case F_GETLK: case F_GETOWN: case F_GETSIG: - rc = smk_curacc(file->f_security, MAY_READ); + rc = smk_curacc(file->f_security, MAY_READ, &ad); break; case F_SETFD: case F_SETFL: @@ -906,10 +995,10 @@ static int smack_file_fcntl(struct file *file, unsigned int cmd, case F_SETLKW: case F_SETOWN: case F_SETSIG: - rc = smk_curacc(file->f_security, MAY_WRITE); + rc = smk_curacc(file->f_security, MAY_WRITE, &ad); break; default: - rc = smk_curacc(file->f_security, MAY_READWRITE); + rc = smk_curacc(file->f_security, MAY_READWRITE, &ad); } return rc; @@ -944,14 +1033,21 @@ static int smack_file_send_sigiotask(struct task_struct *tsk, { struct file *file; int rc; + char *tsp = tsk->cred->security; + struct smk_audit_info ad; /* * struct fown_struct is never outside the context of a struct file */ file = container_of(fown, struct file, f_owner); - rc = smk_access(file->f_security, tsk->cred->security, MAY_WRITE); + /* we don't log here as rc can be overriden */ + rc = smk_access(file->f_security, tsp, MAY_WRITE, NULL); if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE)) - return 0; + rc = 0; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK); + smk_ad_setfield_u_tsk(&ad, tsk); + smack_log(file->f_security, tsp, MAY_WRITE, rc, &ad); return rc; } @@ -964,7 +1060,10 @@ static int smack_file_send_sigiotask(struct task_struct *tsk, static int smack_file_receive(struct file *file) { int may = 0; + struct smk_audit_info ad; + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK); + smk_ad_setfield_u_fs_path(&ad, file->f_path); /* * This code relies on bitmasks. */ @@ -973,7 +1072,7 @@ static int smack_file_receive(struct file *file) if (file->f_mode & FMODE_WRITE) may |= MAY_WRITE; - return smk_curacc(file->f_security, may); + return smk_curacc(file->f_security, may, &ad); } /* @@ -1053,6 +1152,22 @@ static int smack_kernel_create_files_as(struct cred *new, } /** + * smk_curacc_on_task - helper to log task related access + * @p: the task object + * @access : the access requested + * + * Return 0 if access is permitted + */ +static int smk_curacc_on_task(struct task_struct *p, int access) +{ + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK); + smk_ad_setfield_u_tsk(&ad, p); + return smk_curacc(task_security(p), access, &ad); +} + +/** * smack_task_setpgid - Smack check on setting pgid * @p: the task object * @pgid: unused @@ -1061,7 +1176,7 @@ static int smack_kernel_create_files_as(struct cred *new, */ static int smack_task_setpgid(struct task_struct *p, pid_t pgid) { - return smk_curacc(task_security(p), MAY_WRITE); + return smk_curacc_on_task(p, MAY_WRITE); } /** @@ -1072,7 +1187,7 @@ static int smack_task_setpgid(struct task_struct *p, pid_t pgid) */ static int smack_task_getpgid(struct task_struct *p) { - return smk_curacc(task_security(p), MAY_READ); + return smk_curacc_on_task(p, MAY_READ); } /** @@ -1083,7 +1198,7 @@ static int smack_task_getpgid(struct task_struct *p) */ static int smack_task_getsid(struct task_struct *p) { - return smk_curacc(task_security(p), MAY_READ); + return smk_curacc_on_task(p, MAY_READ); } /** @@ -1111,7 +1226,7 @@ static int smack_task_setnice(struct task_struct *p, int nice) rc = cap_task_setnice(p, nice); if (rc == 0) - rc = smk_curacc(task_security(p), MAY_WRITE); + rc = smk_curacc_on_task(p, MAY_WRITE); return rc; } @@ -1128,7 +1243,7 @@ static int smack_task_setioprio(struct task_struct *p, int ioprio) rc = cap_task_setioprio(p, ioprio); if (rc == 0) - rc = smk_curacc(task_security(p), MAY_WRITE); + rc = smk_curacc_on_task(p, MAY_WRITE); return rc; } @@ -1140,7 +1255,7 @@ static int smack_task_setioprio(struct task_struct *p, int ioprio) */ static int smack_task_getioprio(struct task_struct *p) { - return smk_curacc(task_security(p), MAY_READ); + return smk_curacc_on_task(p, MAY_READ); } /** @@ -1158,7 +1273,7 @@ static int smack_task_setscheduler(struct task_struct *p, int policy, rc = cap_task_setscheduler(p, policy, lp); if (rc == 0) - rc = smk_curacc(task_security(p), MAY_WRITE); + rc = smk_curacc_on_task(p, MAY_WRITE); return rc; } @@ -1170,7 +1285,7 @@ static int smack_task_setscheduler(struct task_struct *p, int policy, */ static int smack_task_getscheduler(struct task_struct *p) { - return smk_curacc(task_security(p), MAY_READ); + return smk_curacc_on_task(p, MAY_READ); } /** @@ -1181,7 +1296,7 @@ static int smack_task_getscheduler(struct task_struct *p) */ static int smack_task_movememory(struct task_struct *p) { - return smk_curacc(task_security(p), MAY_WRITE); + return smk_curacc_on_task(p, MAY_WRITE); } /** @@ -1199,18 +1314,23 @@ static int smack_task_movememory(struct task_struct *p) static int smack_task_kill(struct task_struct *p, struct siginfo *info, int sig, u32 secid) { + struct smk_audit_info ad; + + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK); + smk_ad_setfield_u_tsk(&ad, p); /* * Sending a signal requires that the sender * can write the receiver. */ if (secid == 0) - return smk_curacc(task_security(p), MAY_WRITE); + return smk_curacc(task_security(p), MAY_WRITE, &ad); /* * If the secid isn't 0 we're dealing with some USB IO * specific behavior. This is not clean. For one thing * we can't take privilege into account. */ - return smk_access(smack_from_secid(secid), task_security(p), MAY_WRITE); + return smk_access(smack_from_secid(secid), task_security(p), + MAY_WRITE, &ad); } /** @@ -1221,11 +1341,15 @@ static int smack_task_kill(struct task_struct *p, struct siginfo *info, */ static int smack_task_wait(struct task_struct *p) { + struct smk_audit_info ad; + char *sp = current_security(); + char *tsp = task_security(p); int rc; - rc = smk_access(current_security(), task_security(p), MAY_WRITE); + /* we don't log here, we can be overriden */ + rc = smk_access(sp, tsp, MAY_WRITE, NULL); if (rc == 0) - return 0; + goto out_log; /* * Allow the operation to succeed if either task @@ -1239,8 +1363,12 @@ static int smack_task_wait(struct task_struct *p) * the smack value. */ if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE)) - return 0; - + rc = 0; + /* we log only if we didn't get overriden */ + out_log: + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK); + smk_ad_setfield_u_tsk(&ad, p); + smack_log(sp, tsp, MAY_WRITE, rc, &ad); return rc; } @@ -1456,12 +1584,19 @@ static int smack_netlabel_send(struct sock *sk, struct sockaddr_in *sap) int sk_lbl; char *hostsp; struct socket_smack *ssp = sk->sk_security; + struct smk_audit_info ad; rcu_read_lock(); hostsp = smack_host_label(sap); if (hostsp != NULL) { sk_lbl = SMACK_UNLABELED_SOCKET; - rc = smk_access(ssp->smk_out, hostsp, MAY_WRITE); +#ifdef CONFIG_AUDIT + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET); + ad.a.u.net.family = sap->sin_family; + ad.a.u.net.dport = sap->sin_port; + ad.a.u.net.v4info.daddr = sap->sin_addr.s_addr; +#endif + rc = smk_access(ssp->smk_out, hostsp, MAY_WRITE, &ad); } else { sk_lbl = SMACK_CIPSO_SOCKET; rc = 0; @@ -1657,6 +1792,25 @@ static void smack_shm_free_security(struct shmid_kernel *shp) } /** + * smk_curacc_shm : check if current has access on shm + * @shp : the object + * @access : access requested + * + * Returns 0 if current has the requested access, error code otherwise + */ +static int smk_curacc_shm(struct shmid_kernel *shp, int access) +{ + char *ssp = smack_of_shm(shp); + struct smk_audit_info ad; + +#ifdef CONFIG_AUDIT + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_IPC); + ad.a.u.ipc_id = shp->shm_perm.id; +#endif + return smk_curacc(ssp, access, &ad); +} + +/** * smack_shm_associate - Smack access check for shm * @shp: the object * @shmflg: access requested @@ -1665,11 +1819,10 @@ static void smack_shm_free_security(struct shmid_kernel *shp) */ static int smack_shm_associate(struct shmid_kernel *shp, int shmflg) { - char *ssp = smack_of_shm(shp); int may; may = smack_flags_to_may(shmflg); - return smk_curacc(ssp, may); + return smk_curacc_shm(shp, may); } /** @@ -1681,7 +1834,6 @@ static int smack_shm_associate(struct shmid_kernel *shp, int shmflg) */ static int smack_shm_shmctl(struct shmid_kernel *shp, int cmd) { - char *ssp; int may; switch (cmd) { @@ -1704,9 +1856,7 @@ static int smack_shm_shmctl(struct shmid_kernel *shp, int cmd) default: return -EINVAL; } - - ssp = smack_of_shm(shp); - return smk_curacc(ssp, may); + return smk_curacc_shm(shp, may); } /** @@ -1720,11 +1870,10 @@ static int smack_shm_shmctl(struct shmid_kernel *shp, int cmd) static int smack_shm_shmat(struct shmid_kernel *shp, char __user *shmaddr, int shmflg) { - char *ssp = smack_of_shm(shp); int may; may = smack_flags_to_may(shmflg); - return smk_curacc(ssp, may); + return smk_curacc_shm(shp, may); } /** @@ -1766,6 +1915,25 @@ static void smack_sem_free_security(struct sem_array *sma) } /** + * smk_curacc_sem : check if current has access on sem + * @sma : the object + * @access : access requested + * + * Returns 0 if current has the requested access, error code otherwise + */ +static int smk_curacc_sem(struct sem_array *sma, int access) +{ + char *ssp = smack_of_sem(sma); + struct smk_audit_info ad; + +#ifdef CONFIG_AUDIT + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_IPC); + ad.a.u.ipc_id = sma->sem_perm.id; +#endif + return smk_curacc(ssp, access, &ad); +} + +/** * smack_sem_associate - Smack access check for sem * @sma: the object * @semflg: access requested @@ -1774,11 +1942,10 @@ static void smack_sem_free_security(struct sem_array *sma) */ static int smack_sem_associate(struct sem_array *sma, int semflg) { - char *ssp = smack_of_sem(sma); int may; may = smack_flags_to_may(semflg); - return smk_curacc(ssp, may); + return smk_curacc_sem(sma, may); } /** @@ -1790,7 +1957,6 @@ static int smack_sem_associate(struct sem_array *sma, int semflg) */ static int smack_sem_semctl(struct sem_array *sma, int cmd) { - char *ssp; int may; switch (cmd) { @@ -1819,8 +1985,7 @@ static int smack_sem_semctl(struct sem_array *sma, int cmd) return -EINVAL; } - ssp = smack_of_sem(sma); - return smk_curacc(ssp, may); + return smk_curacc_sem(sma, may); } /** @@ -1837,9 +2002,7 @@ static int smack_sem_semctl(struct sem_array *sma, int cmd) static int smack_sem_semop(struct sem_array *sma, struct sembuf *sops, unsigned nsops, int alter) { - char *ssp = smack_of_sem(sma); - - return smk_curacc(ssp, MAY_READWRITE); + return smk_curacc_sem(sma, MAY_READWRITE); } /** @@ -1881,6 +2044,25 @@ static char *smack_of_msq(struct msg_queue *msq) } /** + * smk_curacc_msq : helper to check if current has access on msq + * @msq : the msq + * @access : access requested + * + * return 0 if current has access, error otherwise + */ +static int smk_curacc_msq(struct msg_queue *msq, int access) +{ + char *msp = smack_of_msq(msq); + struct smk_audit_info ad; + +#ifdef CONFIG_AUDIT + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_IPC); + ad.a.u.ipc_id = msq->q_perm.id; +#endif + return smk_curacc(msp, access, &ad); +} + +/** * smack_msg_queue_associate - Smack access check for msg_queue * @msq: the object * @msqflg: access requested @@ -1889,11 +2071,10 @@ static char *smack_of_msq(struct msg_queue *msq) */ static int smack_msg_queue_associate(struct msg_queue *msq, int msqflg) { - char *msp = smack_of_msq(msq); int may; may = smack_flags_to_may(msqflg); - return smk_curacc(msp, may); + return smk_curacc_msq(msq, may); } /** @@ -1905,7 +2086,6 @@ static int smack_msg_queue_associate(struct msg_queue *msq, int msqflg) */ static int smack_msg_queue_msgctl(struct msg_queue *msq, int cmd) { - char *msp; int may; switch (cmd) { @@ -1927,8 +2107,7 @@ static int smack_msg_queue_msgctl(struct msg_queue *msq, int cmd) return -EINVAL; } - msp = smack_of_msq(msq); - return smk_curacc(msp, may); + return smk_curacc_msq(msq, may); } /** @@ -1942,11 +2121,10 @@ static int smack_msg_queue_msgctl(struct msg_queue *msq, int cmd) static int smack_msg_queue_msgsnd(struct msg_queue *msq, struct msg_msg *msg, int msqflg) { - char *msp = smack_of_msq(msq); - int rc; + int may; - rc = smack_flags_to_may(msqflg); - return smk_curacc(msp, rc); + may = smack_flags_to_may(msqflg); + return smk_curacc_msq(msq, may); } /** @@ -1962,9 +2140,7 @@ static int smack_msg_queue_msgsnd(struct msg_queue *msq, struct msg_msg *msg, static int smack_msg_queue_msgrcv(struct msg_queue *msq, struct msg_msg *msg, struct task_struct *target, long type, int mode) { - char *msp = smack_of_msq(msq); - - return smk_curacc(msp, MAY_READWRITE); + return smk_curacc_msq(msq, MAY_READWRITE); } /** @@ -1977,10 +2153,14 @@ static int smack_msg_queue_msgrcv(struct msg_queue *msq, struct msg_msg *msg, static int smack_ipc_permission(struct kern_ipc_perm *ipp, short flag) { char *isp = ipp->security; - int may; + int may = smack_flags_to_may(flag); + struct smk_audit_info ad; - may = smack_flags_to_may(flag); - return smk_curacc(isp, may); +#ifdef CONFIG_AUDIT + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_IPC); + ad.a.u.ipc_id = ipp->id; +#endif + return smk_curacc(isp, may, &ad); } /** @@ -2239,8 +2419,12 @@ static int smack_unix_stream_connect(struct socket *sock, { struct inode *sp = SOCK_INODE(sock); struct inode *op = SOCK_INODE(other); + struct smk_audit_info ad; - return smk_access(smk_of_inode(sp), smk_of_inode(op), MAY_READWRITE); + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET); + smk_ad_setfield_u_net_sk(&ad, other->sk); + return smk_access(smk_of_inode(sp), smk_of_inode(op), + MAY_READWRITE, &ad); } /** @@ -2255,8 +2439,11 @@ static int smack_unix_may_send(struct socket *sock, struct socket *other) { struct inode *sp = SOCK_INODE(sock); struct inode *op = SOCK_INODE(other); + struct smk_audit_info ad; - return smk_access(smk_of_inode(sp), smk_of_inode(op), MAY_WRITE); + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET); + smk_ad_setfield_u_net_sk(&ad, other->sk); + return smk_access(smk_of_inode(sp), smk_of_inode(op), MAY_WRITE, &ad); } /** @@ -2371,7 +2558,7 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb) char smack[SMK_LABELLEN]; char *csp; int rc; - + struct smk_audit_info ad; if (sk->sk_family != PF_INET && sk->sk_family != PF_INET6) return 0; @@ -2389,13 +2576,19 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb) netlbl_secattr_destroy(&secattr); +#ifdef CONFIG_AUDIT + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET); + ad.a.u.net.family = sk->sk_family; + ad.a.u.net.netif = skb->iif; + ipv4_skb_to_auditdata(skb, &ad.a, NULL); +#endif /* * Receiving a packet requires that the other end * be able to write here. Read access is not required. * This is the simplist possible security model * for networking. */ - rc = smk_access(csp, ssp->smk_in, MAY_WRITE); + rc = smk_access(csp, ssp->smk_in, MAY_WRITE, &ad); if (rc != 0) netlbl_skbuff_err(skb, rc, 0); return rc; @@ -2524,6 +2717,7 @@ static int smack_inet_conn_request(struct sock *sk, struct sk_buff *skb, struct iphdr *hdr; char smack[SMK_LABELLEN]; int rc; + struct smk_audit_info ad; /* handle mapped IPv4 packets arriving via IPv6 sockets */ if (family == PF_INET6 && skb->protocol == htons(ETH_P_IP)) @@ -2537,11 +2731,17 @@ static int smack_inet_conn_request(struct sock *sk, struct sk_buff *skb, strncpy(smack, smack_known_huh.smk_known, SMK_MAXLEN); netlbl_secattr_destroy(&secattr); +#ifdef CONFIG_AUDIT + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET); + ad.a.u.net.family = family; + ad.a.u.net.netif = skb->iif; + ipv4_skb_to_auditdata(skb, &ad.a, NULL); +#endif /* * Receiving a packet requires that the other end be able to write * here. Read access is not required. */ - rc = smk_access(smack, ssp->smk_in, MAY_WRITE); + rc = smk_access(smack, ssp->smk_in, MAY_WRITE, &ad); if (rc != 0) return rc; @@ -2643,6 +2843,7 @@ static int smack_key_permission(key_ref_t key_ref, const struct cred *cred, key_perm_t perm) { struct key *keyp; + struct smk_audit_info ad; keyp = key_ref_to_ptr(key_ref); if (keyp == NULL) @@ -2658,8 +2859,13 @@ static int smack_key_permission(key_ref_t key_ref, */ if (cred->security == NULL) return -EACCES; - - return smk_access(cred->security, keyp->security, MAY_READWRITE); +#ifdef CONFIG_AUDIT + smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_KEY); + ad.a.u.key_struct.key = keyp->serial; + ad.a.u.key_struct.key_desc = keyp->description; +#endif + return smk_access(cred->security, keyp->security, + MAY_READWRITE, &ad); } #endif /* CONFIG_KEYS */ @@ -2828,15 +3034,7 @@ struct security_operations smack_ops = { .ptrace_may_access = smack_ptrace_may_access, .ptrace_traceme = smack_ptrace_traceme, - .capget = cap_capget, - .capset = cap_capset, - .capable = cap_capable, .syslog = smack_syslog, - .settime = cap_settime, - .vm_enough_memory = cap_vm_enough_memory, - - .bprm_set_creds = cap_bprm_set_creds, - .bprm_secureexec = cap_bprm_secureexec, .sb_alloc_security = smack_sb_alloc_security, .sb_free_security = smack_sb_free_security, @@ -2860,8 +3058,6 @@ struct security_operations smack_ops = { .inode_post_setxattr = smack_inode_post_setxattr, .inode_getxattr = smack_inode_getxattr, .inode_removexattr = smack_inode_removexattr, - .inode_need_killpriv = cap_inode_need_killpriv, - .inode_killpriv = cap_inode_killpriv, .inode_getsecurity = smack_inode_getsecurity, .inode_setsecurity = smack_inode_setsecurity, .inode_listsecurity = smack_inode_listsecurity, @@ -2882,7 +3078,6 @@ struct security_operations smack_ops = { .cred_commit = smack_cred_commit, .kernel_act_as = smack_kernel_act_as, .kernel_create_files_as = smack_kernel_create_files_as, - .task_fix_setuid = cap_task_fix_setuid, .task_setpgid = smack_task_setpgid, .task_getpgid = smack_task_getpgid, .task_getsid = smack_task_getsid, @@ -2896,7 +3091,6 @@ struct security_operations smack_ops = { .task_kill = smack_task_kill, .task_wait = smack_task_wait, .task_to_inode = smack_task_to_inode, - .task_prctl = cap_task_prctl, .ipc_permission = smack_ipc_permission, .ipc_getsecid = smack_ipc_getsecid, @@ -2923,9 +3117,6 @@ struct security_operations smack_ops = { .sem_semctl = smack_sem_semctl, .sem_semop = smack_sem_semop, - .netlink_send = cap_netlink_send, - .netlink_recv = cap_netlink_recv, - .d_instantiate = smack_d_instantiate, .getprocattr = smack_getprocattr, diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c index e03a7e1..f83a809 100644 --- a/security/smack/smackfs.c +++ b/security/smack/smackfs.c @@ -41,6 +41,7 @@ enum smk_inos { SMK_AMBIENT = 7, /* internet ambient label */ SMK_NETLBLADDR = 8, /* single label hosts */ SMK_ONLYCAP = 9, /* the only "capable" label */ + SMK_LOGGING = 10, /* logging */ }; /* @@ -734,8 +735,8 @@ static void smk_netlbladdr_insert(struct smk_netlbladdr *new) return; } - m = list_entry(rcu_dereference(smk_netlbladdr_list.next), - struct smk_netlbladdr, list); + m = list_entry_rcu(smk_netlbladdr_list.next, + struct smk_netlbladdr, list); /* the comparison '>' is a bit hacky, but works */ if (new->smk_mask.s_addr > m->smk_mask.s_addr) { @@ -748,8 +749,8 @@ static void smk_netlbladdr_insert(struct smk_netlbladdr *new) list_add_rcu(&new->list, &m->list); return; } - m_next = list_entry(rcu_dereference(m->list.next), - struct smk_netlbladdr, list); + m_next = list_entry_rcu(m->list.next, + struct smk_netlbladdr, list); if (new->smk_mask.s_addr > m_next->smk_mask.s_addr) { list_add_rcu(&new->list, &m->list); return; @@ -775,7 +776,7 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, struct sockaddr_in newname; char smack[SMK_LABELLEN]; char *sp; - char data[SMK_NETLBLADDRMAX]; + char data[SMK_NETLBLADDRMAX + 1]; char *host = (char *)&newname.sin_addr.s_addr; int rc; struct netlbl_audit audit_info; @@ -1192,6 +1193,69 @@ static const struct file_operations smk_onlycap_ops = { }; /** + * smk_read_logging - read() for /smack/logging + * @filp: file pointer, not actually used + * @buf: where to put the result + * @cn: maximum to send along + * @ppos: where to start + * + * Returns number of bytes read or error code, as appropriate + */ +static ssize_t smk_read_logging(struct file *filp, char __user *buf, + size_t count, loff_t *ppos) +{ + char temp[32]; + ssize_t rc; + + if (*ppos != 0) + return 0; + + sprintf(temp, "%d\n", log_policy); + rc = simple_read_from_buffer(buf, count, ppos, temp, strlen(temp)); + return rc; +} + +/** + * smk_write_logging - write() for /smack/logging + * @file: file pointer, not actually used + * @buf: where to get the data from + * @count: bytes sent + * @ppos: where to start + * + * Returns number of bytes written or error code, as appropriate + */ +static ssize_t smk_write_logging(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + char temp[32]; + int i; + + if (!capable(CAP_MAC_ADMIN)) + return -EPERM; + + if (count >= sizeof(temp) || count == 0) + return -EINVAL; + + if (copy_from_user(temp, buf, count) != 0) + return -EFAULT; + + temp[count] = '\0'; + + if (sscanf(temp, "%d", &i) != 1) + return -EINVAL; + if (i < 0 || i > 3) + return -EINVAL; + log_policy = i; + return count; +} + + + +static const struct file_operations smk_logging_ops = { + .read = smk_read_logging, + .write = smk_write_logging, +}; +/** * smk_fill_super - fill the /smackfs superblock * @sb: the empty superblock * @data: unused @@ -1221,6 +1285,8 @@ static int smk_fill_super(struct super_block *sb, void *data, int silent) {"netlabel", &smk_netlbladdr_ops, S_IRUGO|S_IWUSR}, [SMK_ONLYCAP] = {"onlycap", &smk_onlycap_ops, S_IRUGO|S_IWUSR}, + [SMK_LOGGING] = + {"logging", &smk_logging_ops, S_IRUGO|S_IWUSR}, /* last one */ {""} }; diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c index ddfb9cc..fdd1f4b 100644 --- a/security/tomoyo/common.c +++ b/security/tomoyo/common.c @@ -28,7 +28,13 @@ static const char *tomoyo_mode_2[4] = { "disabled", "enabled", "enabled", "enabled" }; -/* Table for profile. */ +/* + * tomoyo_control_array is a static data which contains + * + * (1) functionality name used by /sys/kernel/security/tomoyo/profile . + * (2) initial values for "struct tomoyo_profile". + * (3) max values for "struct tomoyo_profile". + */ static struct { const char *keyword; unsigned int current_value; @@ -39,7 +45,13 @@ static struct { [TOMOYO_VERBOSE] = { "TOMOYO_VERBOSE", 1, 1 }, }; -/* Profile table. Memory is allocated as needed. */ +/* + * tomoyo_profile is a structure which is used for holding the mode of access + * controls. TOMOYO has 4 modes: disabled, learning, permissive, enforcing. + * An administrator can define up to 256 profiles. + * The ->profile of "struct tomoyo_domain_info" is used for remembering + * the profile's number (0 - 255) assigned to that domain. + */ static struct tomoyo_profile { unsigned int value[TOMOYO_MAX_CONTROL_INDEX]; const struct tomoyo_path_info *comment; @@ -428,7 +440,6 @@ void tomoyo_fill_path_info(struct tomoyo_path_info *ptr) const char *name = ptr->name; const int len = strlen(name); - ptr->total_len = len; ptr->const_len = tomoyo_const_part_length(name); ptr->is_dir = len && (name[len - 1] == '/'); ptr->is_patterned = (ptr->const_len < len); @@ -866,7 +877,6 @@ static struct tomoyo_profile *tomoyo_find_or_assign_new_profile(const unsigned if (profile >= TOMOYO_MAX_PROFILES) return NULL; - /***** EXCLUSIVE SECTION START *****/ mutex_lock(&lock); ptr = tomoyo_profile_ptr[profile]; if (ptr) @@ -880,7 +890,6 @@ static struct tomoyo_profile *tomoyo_find_or_assign_new_profile(const unsigned tomoyo_profile_ptr[profile] = ptr; ok: mutex_unlock(&lock); - /***** EXCLUSIVE SECTION END *****/ return ptr; } @@ -1009,7 +1018,19 @@ static int tomoyo_read_profile(struct tomoyo_io_buffer *head) return 0; } -/* Structure for policy manager. */ +/* + * tomoyo_policy_manager_entry is a structure which is used for holding list of + * domainnames or programs which are permitted to modify configuration via + * /sys/kernel/security/tomoyo/ interface. + * It has following fields. + * + * (1) "list" which is linked to tomoyo_policy_manager_list . + * (2) "manager" is a domainname or a program's pathname. + * (3) "is_domain" is a bool which is true if "manager" is a domainname, false + * otherwise. + * (4) "is_deleted" is a bool which is true if marked as deleted, false + * otherwise. + */ struct tomoyo_policy_manager_entry { struct list_head list; /* A path to program or a domainname. */ @@ -1018,7 +1039,36 @@ struct tomoyo_policy_manager_entry { bool is_deleted; /* True if this entry is deleted. */ }; -/* The list for "struct tomoyo_policy_manager_entry". */ +/* + * tomoyo_policy_manager_list is used for holding list of domainnames or + * programs which are permitted to modify configuration via + * /sys/kernel/security/tomoyo/ interface. + * + * An entry is added by + * + * # echo ' /sbin/mingetty /bin/login /bin/bash' > \ + * /sys/kernel/security/tomoyo/manager + * (if you want to specify by a domainname) + * + * or + * + * # echo '/usr/lib/ccs/editpolicy' > /sys/kernel/security/tomoyo/manager + * (if you want to specify by a program's location) + * + * and is deleted by + * + * # echo 'delete /sbin/mingetty /bin/login /bin/bash' > \ + * /sys/kernel/security/tomoyo/manager + * + * or + * + * # echo 'delete /usr/lib/ccs/editpolicy' > \ + * /sys/kernel/security/tomoyo/manager + * + * and all entries are retrieved by + * + * # cat /sys/kernel/security/tomoyo/manager + */ static LIST_HEAD(tomoyo_policy_manager_list); static DECLARE_RWSEM(tomoyo_policy_manager_list_lock); @@ -1050,7 +1100,6 @@ static int tomoyo_update_manager_entry(const char *manager, saved_manager = tomoyo_save_name(manager); if (!saved_manager) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_policy_manager_list_lock); list_for_each_entry(ptr, &tomoyo_policy_manager_list, list) { if (ptr->manager != saved_manager) @@ -1072,7 +1121,6 @@ static int tomoyo_update_manager_entry(const char *manager, error = 0; out: up_write(&tomoyo_policy_manager_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -1117,10 +1165,9 @@ static int tomoyo_read_manager_policy(struct tomoyo_io_buffer *head) list); if (ptr->is_deleted) continue; - if (!tomoyo_io_printf(head, "%s\n", ptr->manager->name)) { - done = false; + done = tomoyo_io_printf(head, "%s\n", ptr->manager->name); + if (!done) break; - } } up_read(&tomoyo_policy_manager_list_lock); head->read_eof = done; @@ -1197,13 +1244,11 @@ static bool tomoyo_is_select_one(struct tomoyo_io_buffer *head, if (sscanf(data, "pid=%u", &pid) == 1) { struct task_struct *p; - /***** CRITICAL SECTION START *****/ read_lock(&tasklist_lock); p = find_task_by_vpid(pid); if (p) domain = tomoyo_real_domain(p); read_unlock(&tasklist_lock); - /***** CRITICAL SECTION END *****/ } else if (!strncmp(data, "domain=", 7)) { if (tomoyo_is_domain_def(data + 7)) { down_read(&tomoyo_domain_list_lock); @@ -1447,15 +1492,14 @@ static int tomoyo_read_domain_policy(struct tomoyo_io_buffer *head) TOMOYO_DOMAIN_FLAGS_IGNORE_GLOBAL_ALLOW_READ) ignore_global_allow_read = TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ "\n"; - if (!tomoyo_io_printf(head, - "%s\n" TOMOYO_KEYWORD_USE_PROFILE "%u\n" - "%s%s%s\n", domain->domainname->name, - domain->profile, quota_exceeded, - transition_failed, - ignore_global_allow_read)) { - done = false; + done = tomoyo_io_printf(head, "%s\n" TOMOYO_KEYWORD_USE_PROFILE + "%u\n%s%s%s\n", + domain->domainname->name, + domain->profile, quota_exceeded, + transition_failed, + ignore_global_allow_read); + if (!done) break; - } head->read_step = 2; acl_loop: if (head->read_step == 3) @@ -1463,24 +1507,22 @@ acl_loop: /* Print ACL entries in the domain. */ down_read(&tomoyo_domain_acl_info_list_lock); list_for_each_cookie(apos, head->read_var2, - &domain->acl_info_list) { + &domain->acl_info_list) { struct tomoyo_acl_info *ptr = list_entry(apos, struct tomoyo_acl_info, - list); - if (!tomoyo_print_entry(head, ptr)) { - done = false; + list); + done = tomoyo_print_entry(head, ptr); + if (!done) break; - } } up_read(&tomoyo_domain_acl_info_list_lock); if (!done) break; head->read_step = 3; tail_mark: - if (!tomoyo_io_printf(head, "\n")) { - done = false; + done = tomoyo_io_printf(head, "\n"); + if (!done) break; - } head->read_step = 1; if (head->read_single_domain) break; @@ -1550,11 +1592,10 @@ static int tomoyo_read_domain_profile(struct tomoyo_io_buffer *head) domain = list_entry(pos, struct tomoyo_domain_info, list); if (domain->is_deleted) continue; - if (!tomoyo_io_printf(head, "%u %s\n", domain->profile, - domain->domainname->name)) { - done = false; + done = tomoyo_io_printf(head, "%u %s\n", domain->profile, + domain->domainname->name); + if (!done) break; - } } up_read(&tomoyo_domain_list_lock); head->read_eof = done; @@ -1594,13 +1635,11 @@ static int tomoyo_read_pid(struct tomoyo_io_buffer *head) const int pid = head->read_step; struct task_struct *p; struct tomoyo_domain_info *domain = NULL; - /***** CRITICAL SECTION START *****/ read_lock(&tasklist_lock); p = find_task_by_vpid(pid); if (p) domain = tomoyo_real_domain(p); read_unlock(&tasklist_lock); - /***** CRITICAL SECTION END *****/ if (domain) tomoyo_io_printf(head, "%d %u %s", pid, domain->profile, domain->domainname->name); @@ -2138,7 +2177,13 @@ static ssize_t tomoyo_write(struct file *file, const char __user *buf, return tomoyo_write_control(file, buf, count); } -/* Operations for /sys/kernel/security/tomoyo/ interface. */ +/* + * tomoyo_operations is a "struct file_operations" which is used for handling + * /sys/kernel/security/tomoyo/ interface. + * + * Some files under /sys/kernel/security/tomoyo/ directory accept open(O_RDWR). + * See tomoyo_io_buffer for internals. + */ static const struct file_operations tomoyo_operations = { .open = tomoyo_open, .release = tomoyo_release, diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h index 678f4ff..6d6ba09 100644 --- a/security/tomoyo/common.h +++ b/security/tomoyo/common.h @@ -26,16 +26,43 @@ struct dentry; struct vfsmount; -/* Temporary buffer for holding pathnames. */ +/* + * tomoyo_page_buffer is a structure which is used for holding a pathname + * obtained from "struct dentry" and "struct vfsmount" pair. + * As of now, it is 4096 bytes. If users complain that 4096 bytes is too small + * (because TOMOYO escapes non ASCII printable characters using \ooo format), + * we will make the buffer larger. + */ struct tomoyo_page_buffer { char buffer[4096]; }; -/* Structure for holding a token. */ +/* + * tomoyo_path_info is a structure which is used for holding a string data + * used by TOMOYO. + * This structure has several fields for supporting pattern matching. + * + * (1) "name" is the '\0' terminated string data. + * (2) "hash" is full_name_hash(name, strlen(name)). + * This allows tomoyo_pathcmp() to compare by hash before actually compare + * using strcmp(). + * (3) "const_len" is the length of the initial segment of "name" which + * consists entirely of non wildcard characters. In other words, the length + * which we can compare two strings using strncmp(). + * (4) "is_dir" is a bool which is true if "name" ends with "/", + * false otherwise. + * TOMOYO distinguishes directory and non-directory. A directory ends with + * "/" and non-directory does not end with "/". + * (5) "is_patterned" is a bool which is true if "name" contains wildcard + * characters, false otherwise. This allows TOMOYO to use "hash" and + * strcmp() for string comparison if "is_patterned" is false. + * (6) "depth" is calculated using the number of "/" characters in "name". + * This allows TOMOYO to avoid comparing two pathnames which never match + * (e.g. whether "/var/www/html/index.html" matches "/tmp/sh-thd-\$"). + */ struct tomoyo_path_info { const char *name; u32 hash; /* = full_name_hash(name, strlen(name)) */ - u16 total_len; /* = strlen(name) */ u16 const_len; /* = tomoyo_const_part_length(name) */ bool is_dir; /* = tomoyo_strendswith(name, "/") */ bool is_patterned; /* = tomoyo_path_contains_pattern(name) */ @@ -51,7 +78,20 @@ struct tomoyo_path_info { */ #define TOMOYO_MAX_PATHNAME_LEN 4000 -/* Structure for holding requested pathname. */ +/* + * tomoyo_path_info_with_data is a structure which is used for holding a + * pathname obtained from "struct dentry" and "struct vfsmount" pair. + * + * "struct tomoyo_path_info_with_data" consists of "struct tomoyo_path_info" + * and buffer for the pathname, while "struct tomoyo_page_buffer" consists of + * buffer for the pathname only. + * + * "struct tomoyo_path_info_with_data" is intended to allow TOMOYO to release + * both "struct tomoyo_path_info" and buffer for the pathname by single kfree() + * so that we don't need to return two pointers to the caller. If the caller + * puts "struct tomoyo_path_info" on stack memory, we will be able to remove + * "struct tomoyo_path_info_with_data". + */ struct tomoyo_path_info_with_data { /* Keep "head" first, for this pointer is passed to tomoyo_free(). */ struct tomoyo_path_info head; @@ -61,7 +101,15 @@ struct tomoyo_path_info_with_data { }; /* - * Common header for holding ACL entries. + * tomoyo_acl_info is a structure which is used for holding + * + * (1) "list" which is linked to the ->acl_info_list of + * "struct tomoyo_domain_info" + * (2) "type" which tells + * (a) type & 0x7F : type of the entry (either + * "struct tomoyo_single_path_acl_record" or + * "struct tomoyo_double_path_acl_record") + * (b) type & 0x80 : whether the entry is marked as "deleted". * * Packing "struct tomoyo_acl_info" allows * "struct tomoyo_single_path_acl_record" to embed "u16" and @@ -81,7 +129,28 @@ struct tomoyo_acl_info { /* This ACL entry is deleted. */ #define TOMOYO_ACL_DELETED 0x80 -/* Structure for domain information. */ +/* + * tomoyo_domain_info is a structure which is used for holding permissions + * (e.g. "allow_read /lib/libc-2.5.so") given to each domain. + * It has following fields. + * + * (1) "list" which is linked to tomoyo_domain_list . + * (2) "acl_info_list" which is linked to "struct tomoyo_acl_info". + * (3) "domainname" which holds the name of the domain. + * (4) "profile" which remembers profile number assigned to this domain. + * (5) "is_deleted" is a bool which is true if this domain is marked as + * "deleted", false otherwise. + * (6) "quota_warned" is a bool which is used for suppressing warning message + * when learning mode learned too much entries. + * (7) "flags" which remembers this domain's attributes. + * + * A domain's lifecycle is an analogy of files on / directory. + * Multiple domains with the same domainname cannot be created (as with + * creating files with the same filename fails with -EEXIST). + * If a process reached a domain, that process can reside in that domain after + * that domain is marked as "deleted" (as with a process can access an already + * open()ed file after that file was unlink()ed). + */ struct tomoyo_domain_info { struct list_head list; struct list_head acl_info_list; @@ -108,10 +177,18 @@ struct tomoyo_domain_info { #define TOMOYO_DOMAIN_FLAGS_TRANSITION_FAILED 2 /* - * Structure for "allow_read/write", "allow_execute", "allow_read", - * "allow_write", "allow_create", "allow_unlink", "allow_mkdir", "allow_rmdir", - * "allow_mkfifo", "allow_mksock", "allow_mkblock", "allow_mkchar", - * "allow_truncate", "allow_symlink" and "allow_rewrite" directive. + * tomoyo_single_path_acl_record is a structure which is used for holding an + * entry with one pathname operation (e.g. open(), mkdir()). + * It has following fields. + * + * (1) "head" which is a "struct tomoyo_acl_info". + * (2) "perm" which is a bitmask of permitted operations. + * (3) "filename" is the pathname. + * + * Directives held by this structure are "allow_read/write", "allow_execute", + * "allow_read", "allow_write", "allow_create", "allow_unlink", "allow_mkdir", + * "allow_rmdir", "allow_mkfifo", "allow_mksock", "allow_mkblock", + * "allow_mkchar", "allow_truncate", "allow_symlink" and "allow_rewrite". */ struct tomoyo_single_path_acl_record { struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_SINGLE_PATH_ACL */ @@ -120,7 +197,18 @@ struct tomoyo_single_path_acl_record { const struct tomoyo_path_info *filename; }; -/* Structure for "allow_rename" and "allow_link" directive. */ +/* + * tomoyo_double_path_acl_record is a structure which is used for holding an + * entry with two pathnames operation (i.e. link() and rename()). + * It has following fields. + * + * (1) "head" which is a "struct tomoyo_acl_info". + * (2) "perm" which is a bitmask of permitted operations. + * (3) "filename1" is the source/old pathname. + * (4) "filename2" is the destination/new pathname. + * + * Directives held by this structure are "allow_rename" and "allow_link". + */ struct tomoyo_double_path_acl_record { struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_DOUBLE_PATH_ACL */ u8 perm; @@ -153,7 +241,29 @@ struct tomoyo_double_path_acl_record { #define TOMOYO_VERBOSE 2 #define TOMOYO_MAX_CONTROL_INDEX 3 -/* Structure for reading/writing policy via securityfs interfaces. */ +/* + * tomoyo_io_buffer is a structure which is used for reading and modifying + * configuration via /sys/kernel/security/tomoyo/ interface. + * It has many fields. ->read_var1 , ->read_var2 , ->write_var1 are used as + * cursors. + * + * Since the content of /sys/kernel/security/tomoyo/domain_policy is a list of + * "struct tomoyo_domain_info" entries and each "struct tomoyo_domain_info" + * entry has a list of "struct tomoyo_acl_info", we need two cursors when + * reading (one is for traversing tomoyo_domain_list and the other is for + * traversing "struct tomoyo_acl_info"->acl_info_list ). + * + * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with + * "select ", TOMOYO seeks the cursor ->read_var1 and ->write_var1 to the + * domain with the domainname specified by the rest of that line (NULL is set + * if seek failed). + * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with + * "delete ", TOMOYO deletes an entry or a domain specified by the rest of that + * line (->write_var1 is set to NULL if a domain was deleted). + * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with + * neither "select " nor "delete ", an entry or a domain specified by that line + * is appended. + */ struct tomoyo_io_buffer { int (*read) (struct tomoyo_io_buffer *); int (*write) (struct tomoyo_io_buffer *); diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c index 2d67487..1d8b169 100644 --- a/security/tomoyo/domain.c +++ b/security/tomoyo/domain.c @@ -19,11 +19,63 @@ /* The initial domain. */ struct tomoyo_domain_info tomoyo_kernel_domain; -/* The list for "struct tomoyo_domain_info". */ +/* + * tomoyo_domain_list is used for holding list of domains. + * The ->acl_info_list of "struct tomoyo_domain_info" is used for holding + * permissions (e.g. "allow_read /lib/libc-2.5.so") given to each domain. + * + * An entry is added by + * + * # ( echo ""; echo "allow_execute /sbin/init" ) > \ + * /sys/kernel/security/tomoyo/domain_policy + * + * and is deleted by + * + * # ( echo ""; echo "delete allow_execute /sbin/init" ) > \ + * /sys/kernel/security/tomoyo/domain_policy + * + * and all entries are retrieved by + * + * # cat /sys/kernel/security/tomoyo/domain_policy + * + * A domain is added by + * + * # echo "" > /sys/kernel/security/tomoyo/domain_policy + * + * and is deleted by + * + * # echo "delete " > /sys/kernel/security/tomoyo/domain_policy + * + * and all domains are retrieved by + * + * # grep '^' /sys/kernel/security/tomoyo/domain_policy + * + * Normally, a domainname is monotonically getting longer because a domainname + * which the process will belong to if an execve() operation succeeds is + * defined as a concatenation of "current domainname" + "pathname passed to + * execve()". + * See tomoyo_domain_initializer_list and tomoyo_domain_keeper_list for + * exceptions. + */ LIST_HEAD(tomoyo_domain_list); DECLARE_RWSEM(tomoyo_domain_list_lock); -/* Structure for "initialize_domain" and "no_initialize_domain" keyword. */ +/* + * tomoyo_domain_initializer_entry is a structure which is used for holding + * "initialize_domain" and "no_initialize_domain" entries. + * It has following fields. + * + * (1) "list" which is linked to tomoyo_domain_initializer_list . + * (2) "domainname" which is "a domainname" or "the last component of a + * domainname". This field is NULL if "from" clause is not specified. + * (3) "program" which is a program's pathname. + * (4) "is_deleted" is a bool which is true if marked as deleted, false + * otherwise. + * (5) "is_not" is a bool which is true if "no_initialize_domain", false + * otherwise. + * (6) "is_last_name" is a bool which is true if "domainname" is "the last + * component of a domainname", false otherwise. + */ struct tomoyo_domain_initializer_entry { struct list_head list; const struct tomoyo_path_info *domainname; /* This may be NULL */ @@ -34,7 +86,23 @@ struct tomoyo_domain_initializer_entry { bool is_last_name; }; -/* Structure for "keep_domain" and "no_keep_domain" keyword. */ +/* + * tomoyo_domain_keeper_entry is a structure which is used for holding + * "keep_domain" and "no_keep_domain" entries. + * It has following fields. + * + * (1) "list" which is linked to tomoyo_domain_keeper_list . + * (2) "domainname" which is "a domainname" or "the last component of a + * domainname". + * (3) "program" which is a program's pathname. + * This field is NULL if "from" clause is not specified. + * (4) "is_deleted" is a bool which is true if marked as deleted, false + * otherwise. + * (5) "is_not" is a bool which is true if "no_initialize_domain", false + * otherwise. + * (6) "is_last_name" is a bool which is true if "domainname" is "the last + * component of a domainname", false otherwise. + */ struct tomoyo_domain_keeper_entry { struct list_head list; const struct tomoyo_path_info *domainname; @@ -45,7 +113,16 @@ struct tomoyo_domain_keeper_entry { bool is_last_name; }; -/* Structure for "alias" keyword. */ +/* + * tomoyo_alias_entry is a structure which is used for holding "alias" entries. + * It has following fields. + * + * (1) "list" which is linked to tomoyo_alias_list . + * (2) "original_name" which is a dereferenced pathname. + * (3) "aliased_name" which is a symlink's pathname. + * (4) "is_deleted" is a bool which is true if marked as deleted, false + * otherwise. + */ struct tomoyo_alias_entry { struct list_head list; const struct tomoyo_path_info *original_name; @@ -67,14 +144,12 @@ void tomoyo_set_domain_flag(struct tomoyo_domain_info *domain, { /* We need to serialize because this is bitfield operation. */ static DEFINE_SPINLOCK(lock); - /***** CRITICAL SECTION START *****/ spin_lock(&lock); if (!is_delete) domain->flags |= flags; else domain->flags &= ~flags; spin_unlock(&lock); - /***** CRITICAL SECTION END *****/ } /** @@ -94,7 +169,42 @@ const char *tomoyo_get_last_name(const struct tomoyo_domain_info *domain) return cp0; } -/* The list for "struct tomoyo_domain_initializer_entry". */ +/* + * tomoyo_domain_initializer_list is used for holding list of programs which + * triggers reinitialization of domainname. Normally, a domainname is + * monotonically getting longer. But sometimes, we restart daemon programs. + * It would be convenient for us that "a daemon started upon system boot" and + * "the daemon restarted from console" belong to the same domain. Thus, TOMOYO + * provides a way to shorten domainnames. + * + * An entry is added by + * + * # echo 'initialize_domain /usr/sbin/httpd' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and is deleted by + * + * # echo 'delete initialize_domain /usr/sbin/httpd' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and all entries are retrieved by + * + * # grep ^initialize_domain /sys/kernel/security/tomoyo/exception_policy + * + * In the example above, /usr/sbin/httpd will belong to + * " /usr/sbin/httpd" domain. + * + * You may specify a domainname using "from" keyword. + * "initialize_domain /usr/sbin/httpd from /etc/rc.d/init.d/httpd" + * will cause "/usr/sbin/httpd" executed from " /etc/rc.d/init.d/httpd" + * domain to belong to " /usr/sbin/httpd" domain. + * + * You may add "no_" prefix to "initialize_domain". + * "initialize_domain /usr/sbin/httpd" and + * "no_initialize_domain /usr/sbin/httpd from /etc/rc.d/init.d/httpd" + * will cause "/usr/sbin/httpd" to belong to " /usr/sbin/httpd" domain + * unless executed from " /etc/rc.d/init.d/httpd" domain. + */ static LIST_HEAD(tomoyo_domain_initializer_list); static DECLARE_RWSEM(tomoyo_domain_initializer_list_lock); @@ -135,7 +245,6 @@ static int tomoyo_update_domain_initializer_entry(const char *domainname, saved_program = tomoyo_save_name(program); if (!saved_program) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_domain_initializer_list_lock); list_for_each_entry(ptr, &tomoyo_domain_initializer_list, list) { if (ptr->is_not != is_not || @@ -161,7 +270,6 @@ static int tomoyo_update_domain_initializer_entry(const char *domainname, error = 0; out: up_write(&tomoyo_domain_initializer_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -193,13 +301,12 @@ bool tomoyo_read_domain_initializer_policy(struct tomoyo_io_buffer *head) from = " from "; domain = ptr->domainname->name; } - if (!tomoyo_io_printf(head, - "%s" TOMOYO_KEYWORD_INITIALIZE_DOMAIN - "%s%s%s\n", no, ptr->program->name, from, - domain)) { - done = false; + done = tomoyo_io_printf(head, + "%s" TOMOYO_KEYWORD_INITIALIZE_DOMAIN + "%s%s%s\n", no, ptr->program->name, + from, domain); + if (!done) break; - } } up_read(&tomoyo_domain_initializer_list_lock); return done; @@ -273,7 +380,44 @@ static bool tomoyo_is_domain_initializer(const struct tomoyo_path_info * return flag; } -/* The list for "struct tomoyo_domain_keeper_entry". */ +/* + * tomoyo_domain_keeper_list is used for holding list of domainnames which + * suppresses domain transition. Normally, a domainname is monotonically + * getting longer. But sometimes, we want to suppress domain transition. + * It would be convenient for us that programs executed from a login session + * belong to the same domain. Thus, TOMOYO provides a way to suppress domain + * transition. + * + * An entry is added by + * + * # echo 'keep_domain /usr/sbin/sshd /bin/bash' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and is deleted by + * + * # echo 'delete keep_domain /usr/sbin/sshd /bin/bash' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and all entries are retrieved by + * + * # grep ^keep_domain /sys/kernel/security/tomoyo/exception_policy + * + * In the example above, any process which belongs to + * " /usr/sbin/sshd /bin/bash" domain will remain in that domain, + * unless explicitly specified by "initialize_domain" or "no_keep_domain". + * + * You may specify a program using "from" keyword. + * "keep_domain /bin/pwd from /usr/sbin/sshd /bin/bash" + * will cause "/bin/pwd" executed from " /usr/sbin/sshd /bin/bash" + * domain to remain in " /usr/sbin/sshd /bin/bash" domain. + * + * You may add "no_" prefix to "keep_domain". + * "keep_domain /usr/sbin/sshd /bin/bash" and + * "no_keep_domain /usr/bin/passwd from /usr/sbin/sshd /bin/bash" will + * cause "/usr/bin/passwd" to belong to + * " /usr/sbin/sshd /bin/bash /usr/bin/passwd" domain, unless + * explicitly specified by "initialize_domain". + */ static LIST_HEAD(tomoyo_domain_keeper_list); static DECLARE_RWSEM(tomoyo_domain_keeper_list_lock); @@ -296,7 +440,6 @@ static int tomoyo_update_domain_keeper_entry(const char *domainname, struct tomoyo_domain_keeper_entry *ptr; const struct tomoyo_path_info *saved_domainname; const struct tomoyo_path_info *saved_program = NULL; - static DEFINE_MUTEX(lock); int error = -ENOMEM; bool is_last_name = false; @@ -315,7 +458,6 @@ static int tomoyo_update_domain_keeper_entry(const char *domainname, saved_domainname = tomoyo_save_name(domainname); if (!saved_domainname) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_domain_keeper_list_lock); list_for_each_entry(ptr, &tomoyo_domain_keeper_list, list) { if (ptr->is_not != is_not || @@ -341,7 +483,6 @@ static int tomoyo_update_domain_keeper_entry(const char *domainname, error = 0; out: up_write(&tomoyo_domain_keeper_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -394,13 +535,12 @@ bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head) from = " from "; program = ptr->program->name; } - if (!tomoyo_io_printf(head, - "%s" TOMOYO_KEYWORD_KEEP_DOMAIN - "%s%s%s\n", no, program, from, - ptr->domainname->name)) { - done = false; + done = tomoyo_io_printf(head, + "%s" TOMOYO_KEYWORD_KEEP_DOMAIN + "%s%s%s\n", no, program, from, + ptr->domainname->name); + if (!done) break; - } } up_read(&tomoyo_domain_keeper_list_lock); return done; @@ -446,7 +586,36 @@ static bool tomoyo_is_domain_keeper(const struct tomoyo_path_info *domainname, return flag; } -/* The list for "struct tomoyo_alias_entry". */ +/* + * tomoyo_alias_list is used for holding list of symlink's pathnames which are + * allowed to be passed to an execve() request. Normally, the domainname which + * the current process will belong to after execve() succeeds is calculated + * using dereferenced pathnames. But some programs behave differently depending + * on the name passed to argv[0]. For busybox, calculating domainname using + * dereferenced pathnames will cause all programs in the busybox to belong to + * the same domain. Thus, TOMOYO provides a way to allow use of symlink's + * pathname for checking execve()'s permission and calculating domainname which + * the current process will belong to after execve() succeeds. + * + * An entry is added by + * + * # echo 'alias /bin/busybox /bin/cat' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and is deleted by + * + * # echo 'delete alias /bin/busybox /bin/cat' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and all entries are retrieved by + * + * # grep ^alias /sys/kernel/security/tomoyo/exception_policy + * + * In the example above, if /bin/cat is a symlink to /bin/busybox and execution + * of /bin/cat is requested, permission is checked for /bin/cat rather than + * /bin/busybox and domainname which the current process will belong to after + * execve() succeeds is calculated using /bin/cat rather than /bin/busybox . + */ static LIST_HEAD(tomoyo_alias_list); static DECLARE_RWSEM(tomoyo_alias_list_lock); @@ -476,7 +645,6 @@ static int tomoyo_update_alias_entry(const char *original_name, saved_aliased_name = tomoyo_save_name(aliased_name); if (!saved_original_name || !saved_aliased_name) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_alias_list_lock); list_for_each_entry(ptr, &tomoyo_alias_list, list) { if (ptr->original_name != saved_original_name || @@ -499,7 +667,6 @@ static int tomoyo_update_alias_entry(const char *original_name, error = 0; out: up_write(&tomoyo_alias_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -522,12 +689,11 @@ bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head) ptr = list_entry(pos, struct tomoyo_alias_entry, list); if (ptr->is_deleted) continue; - if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_ALIAS "%s %s\n", - ptr->original_name->name, - ptr->aliased_name->name)) { - done = false; + done = tomoyo_io_printf(head, TOMOYO_KEYWORD_ALIAS "%s %s\n", + ptr->original_name->name, + ptr->aliased_name->name); + if (!done) break; - } } up_read(&tomoyo_alias_list_lock); return done; @@ -567,7 +733,6 @@ int tomoyo_delete_domain(char *domainname) name.name = domainname; tomoyo_fill_path_info(&name); - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_domain_list_lock); /* Is there an active domain? */ list_for_each_entry(domain, &tomoyo_domain_list, list) { @@ -581,7 +746,6 @@ int tomoyo_delete_domain(char *domainname) break; } up_write(&tomoyo_domain_list_lock); - /***** EXCLUSIVE SECTION END *****/ return 0; } @@ -600,7 +764,6 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char * struct tomoyo_domain_info *domain = NULL; const struct tomoyo_path_info *saved_domainname; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_domain_list_lock); domain = tomoyo_find_domain(domainname); if (domain) @@ -619,7 +782,6 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char * domain->domainname != saved_domainname) continue; flag = false; - /***** CRITICAL SECTION START *****/ read_lock(&tasklist_lock); for_each_process(p) { if (tomoyo_real_domain(p) != domain) @@ -628,7 +790,6 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char * break; } read_unlock(&tasklist_lock); - /***** CRITICAL SECTION END *****/ if (flag) continue; list_for_each_entry(ptr, &domain->acl_info_list, list) { @@ -651,7 +812,6 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char * } out: up_write(&tomoyo_domain_list_lock); - /***** EXCLUSIVE SECTION END *****/ return domain; } @@ -739,7 +899,7 @@ int tomoyo_find_next_domain(struct linux_binprm *bprm, } /* Check execute permission. */ - retval = tomoyo_check_exec_perm(old_domain, &r, tmp); + retval = tomoyo_check_exec_perm(old_domain, &r); if (retval < 0) goto out; diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c index 2316da8..5ae3a57 100644 --- a/security/tomoyo/file.c +++ b/security/tomoyo/file.c @@ -14,21 +14,50 @@ #include "realpath.h" #define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE]) -/* Structure for "allow_read" keyword. */ +/* + * tomoyo_globally_readable_file_entry is a structure which is used for holding + * "allow_read" entries. + * It has following fields. + * + * (1) "list" which is linked to tomoyo_globally_readable_list . + * (2) "filename" is a pathname which is allowed to open(O_RDONLY). + * (3) "is_deleted" is a bool which is true if marked as deleted, false + * otherwise. + */ struct tomoyo_globally_readable_file_entry { struct list_head list; const struct tomoyo_path_info *filename; bool is_deleted; }; -/* Structure for "file_pattern" keyword. */ +/* + * tomoyo_pattern_entry is a structure which is used for holding + * "tomoyo_pattern_list" entries. + * It has following fields. + * + * (1) "list" which is linked to tomoyo_pattern_list . + * (2) "pattern" is a pathname pattern which is used for converting pathnames + * to pathname patterns during learning mode. + * (3) "is_deleted" is a bool which is true if marked as deleted, false + * otherwise. + */ struct tomoyo_pattern_entry { struct list_head list; const struct tomoyo_path_info *pattern; bool is_deleted; }; -/* Structure for "deny_rewrite" keyword. */ +/* + * tomoyo_no_rewrite_entry is a structure which is used for holding + * "deny_rewrite" entries. + * It has following fields. + * + * (1) "list" which is linked to tomoyo_no_rewrite_list . + * (2) "pattern" is a pathname which is by default not permitted to modify + * already existing content. + * (3) "is_deleted" is a bool which is true if marked as deleted, false + * otherwise. + */ struct tomoyo_no_rewrite_entry { struct list_head list; const struct tomoyo_path_info *pattern; @@ -141,7 +170,31 @@ static int tomoyo_update_single_path_acl(const u8 type, const char *filename, struct tomoyo_domain_info * const domain, const bool is_delete); -/* The list for "struct tomoyo_globally_readable_file_entry". */ +/* + * tomoyo_globally_readable_list is used for holding list of pathnames which + * are by default allowed to be open()ed for reading by any process. + * + * An entry is added by + * + * # echo 'allow_read /lib/libc-2.5.so' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and is deleted by + * + * # echo 'delete allow_read /lib/libc-2.5.so' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and all entries are retrieved by + * + * # grep ^allow_read /sys/kernel/security/tomoyo/exception_policy + * + * In the example above, any process is allowed to + * open("/lib/libc-2.5.so", O_RDONLY). + * One exception is, if the domain which current process belongs to is marked + * as "ignore_global_allow_read", current process can't do so unless explicitly + * given "allow_read /lib/libc-2.5.so" to the domain which current process + * belongs to. + */ static LIST_HEAD(tomoyo_globally_readable_list); static DECLARE_RWSEM(tomoyo_globally_readable_list_lock); @@ -166,7 +219,6 @@ static int tomoyo_update_globally_readable_entry(const char *filename, saved_filename = tomoyo_save_name(filename); if (!saved_filename) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_globally_readable_list_lock); list_for_each_entry(ptr, &tomoyo_globally_readable_list, list) { if (ptr->filename != saved_filename) @@ -187,7 +239,6 @@ static int tomoyo_update_globally_readable_entry(const char *filename, error = 0; out: up_write(&tomoyo_globally_readable_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -249,17 +300,44 @@ bool tomoyo_read_globally_readable_policy(struct tomoyo_io_buffer *head) list); if (ptr->is_deleted) continue; - if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_ALLOW_READ "%s\n", - ptr->filename->name)) { - done = false; + done = tomoyo_io_printf(head, TOMOYO_KEYWORD_ALLOW_READ "%s\n", + ptr->filename->name); + if (!done) break; - } } up_read(&tomoyo_globally_readable_list_lock); return done; } -/* The list for "struct tomoyo_pattern_entry". */ +/* tomoyo_pattern_list is used for holding list of pathnames which are used for + * converting pathnames to pathname patterns during learning mode. + * + * An entry is added by + * + * # echo 'file_pattern /proc/\$/mounts' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and is deleted by + * + * # echo 'delete file_pattern /proc/\$/mounts' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and all entries are retrieved by + * + * # grep ^file_pattern /sys/kernel/security/tomoyo/exception_policy + * + * In the example above, if a process which belongs to a domain which is in + * learning mode requested open("/proc/1/mounts", O_RDONLY), + * "allow_read /proc/\$/mounts" is automatically added to the domain which that + * process belongs to. + * + * It is not a desirable behavior that we have to use /proc/\$/ instead of + * /proc/self/ when current process needs to access only current process's + * information. As of now, LSM version of TOMOYO is using __d_path() for + * calculating pathname. Non LSM version of TOMOYO is using its own function + * which pretends as if /proc/self/ is not a symlink; so that we can forbid + * current process from accessing other process's information. + */ static LIST_HEAD(tomoyo_pattern_list); static DECLARE_RWSEM(tomoyo_pattern_list_lock); @@ -284,7 +362,6 @@ static int tomoyo_update_file_pattern_entry(const char *pattern, saved_pattern = tomoyo_save_name(pattern); if (!saved_pattern) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_pattern_list_lock); list_for_each_entry(ptr, &tomoyo_pattern_list, list) { if (saved_pattern != ptr->pattern) @@ -305,7 +382,6 @@ static int tomoyo_update_file_pattern_entry(const char *pattern, error = 0; out: up_write(&tomoyo_pattern_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -373,17 +449,44 @@ bool tomoyo_read_file_pattern(struct tomoyo_io_buffer *head) ptr = list_entry(pos, struct tomoyo_pattern_entry, list); if (ptr->is_deleted) continue; - if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_FILE_PATTERN "%s\n", - ptr->pattern->name)) { - done = false; + done = tomoyo_io_printf(head, TOMOYO_KEYWORD_FILE_PATTERN + "%s\n", ptr->pattern->name); + if (!done) break; - } } up_read(&tomoyo_pattern_list_lock); return done; } -/* The list for "struct tomoyo_no_rewrite_entry". */ +/* + * tomoyo_no_rewrite_list is used for holding list of pathnames which are by + * default forbidden to modify already written content of a file. + * + * An entry is added by + * + * # echo 'deny_rewrite /var/log/messages' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and is deleted by + * + * # echo 'delete deny_rewrite /var/log/messages' > \ + * /sys/kernel/security/tomoyo/exception_policy + * + * and all entries are retrieved by + * + * # grep ^deny_rewrite /sys/kernel/security/tomoyo/exception_policy + * + * In the example above, if a process requested to rewrite /var/log/messages , + * the process can't rewrite unless the domain which that process belongs to + * has "allow_rewrite /var/log/messages" entry. + * + * It is not a desirable behavior that we have to add "\040(deleted)" suffix + * when we want to allow rewriting already unlink()ed file. As of now, + * LSM version of TOMOYO is using __d_path() for calculating pathname. + * Non LSM version of TOMOYO is using its own function which doesn't append + * " (deleted)" suffix if the file is already unlink()ed; so that we don't + * need to worry whether the file is already unlink()ed or not. + */ static LIST_HEAD(tomoyo_no_rewrite_list); static DECLARE_RWSEM(tomoyo_no_rewrite_list_lock); @@ -407,7 +510,6 @@ static int tomoyo_update_no_rewrite_entry(const char *pattern, saved_pattern = tomoyo_save_name(pattern); if (!saved_pattern) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_no_rewrite_list_lock); list_for_each_entry(ptr, &tomoyo_no_rewrite_list, list) { if (ptr->pattern != saved_pattern) @@ -428,7 +530,6 @@ static int tomoyo_update_no_rewrite_entry(const char *pattern, error = 0; out: up_write(&tomoyo_no_rewrite_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -489,11 +590,10 @@ bool tomoyo_read_no_rewrite_policy(struct tomoyo_io_buffer *head) ptr = list_entry(pos, struct tomoyo_no_rewrite_entry, list); if (ptr->is_deleted) continue; - if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_DENY_REWRITE "%s\n", - ptr->pattern->name)) { - done = false; + done = tomoyo_io_printf(head, TOMOYO_KEYWORD_DENY_REWRITE + "%s\n", ptr->pattern->name); + if (!done) break; - } } up_read(&tomoyo_no_rewrite_list_lock); return done; @@ -745,7 +845,6 @@ static int tomoyo_update_single_path_acl(const u8 type, const char *filename, saved_filename = tomoyo_save_name(filename); if (!saved_filename) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_domain_acl_info_list_lock); if (is_delete) goto delete; @@ -800,7 +899,6 @@ static int tomoyo_update_single_path_acl(const u8 type, const char *filename, } out: up_write(&tomoyo_domain_acl_info_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -836,7 +934,6 @@ static int tomoyo_update_double_path_acl(const u8 type, const char *filename1, saved_filename2 = tomoyo_save_name(filename2); if (!saved_filename1 || !saved_filename2) return -ENOMEM; - /***** EXCLUSIVE SECTION START *****/ down_write(&tomoyo_domain_acl_info_list_lock); if (is_delete) goto delete; @@ -884,7 +981,6 @@ static int tomoyo_update_double_path_acl(const u8 type, const char *filename1, } out: up_write(&tomoyo_domain_acl_info_list_lock); - /***** EXCLUSIVE SECTION END *****/ return error; } @@ -1025,13 +1121,11 @@ int tomoyo_check_file_perm(struct tomoyo_domain_info *domain, * * @domain: Pointer to "struct tomoyo_domain_info". * @filename: Check permission for "execute". - * @tmp: Buffer for temporary use. * * Returns 0 on success, negativevalue otherwise. */ int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain, - const struct tomoyo_path_info *filename, - struct tomoyo_page_buffer *tmp) + const struct tomoyo_path_info *filename) { const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE); diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 40927a8..5f2e332 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -220,7 +220,6 @@ void *tomoyo_alloc_element(const unsigned int size) = roundup(size, max(sizeof(void *), sizeof(long))); if (word_aligned_size > PATH_MAX) return NULL; - /***** EXCLUSIVE SECTION START *****/ mutex_lock(&lock); if (buf_used_len + word_aligned_size > PATH_MAX) { if (!tomoyo_quota_for_elements || @@ -251,7 +250,6 @@ void *tomoyo_alloc_element(const unsigned int size) } } mutex_unlock(&lock); - /***** EXCLUSIVE SECTION END *****/ return ptr; } @@ -267,7 +265,16 @@ static unsigned int tomoyo_quota_for_savename; */ #define TOMOYO_MAX_HASH 256 -/* Structure for string data. */ +/* + * tomoyo_name_entry is a structure which is used for linking + * "struct tomoyo_path_info" into tomoyo_name_list . + * + * Since tomoyo_name_list manages a list of strings which are shared by + * multiple processes (whereas "struct tomoyo_path_info" inside + * "struct tomoyo_path_info_with_data" is not shared), a reference counter will + * be added to "struct tomoyo_name_entry" rather than "struct tomoyo_path_info" + * when TOMOYO starts supporting garbage collector. + */ struct tomoyo_name_entry { struct list_head list; struct tomoyo_path_info entry; @@ -281,10 +288,10 @@ struct tomoyo_free_memory_block_list { }; /* - * The list for "struct tomoyo_name_entry". - * - * This list is updated only inside tomoyo_save_name(), thus - * no global mutex exists. + * tomoyo_name_list is used for holding string data used by TOMOYO. + * Since same string data is likely used for multiple times (e.g. + * "/lib/libc-2.5.so"), TOMOYO shares string data in the form of + * "const struct tomoyo_path_info *". */ static struct list_head tomoyo_name_list[TOMOYO_MAX_HASH]; @@ -318,7 +325,6 @@ const struct tomoyo_path_info *tomoyo_save_name(const char *name) return NULL; } hash = full_name_hash((const unsigned char *) name, len - 1); - /***** EXCLUSIVE SECTION START *****/ mutex_lock(&lock); list_for_each_entry(ptr, &tomoyo_name_list[hash % TOMOYO_MAX_HASH], list) { @@ -366,7 +372,6 @@ const struct tomoyo_path_info *tomoyo_save_name(const char *name) } out: mutex_unlock(&lock); - /***** EXCLUSIVE SECTION END *****/ return ptr ? &ptr->entry : NULL; } diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index e42be5c..3194d09 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -262,6 +262,10 @@ static int tomoyo_dentry_open(struct file *f, const struct cred *cred) return tomoyo_check_open_permission(tomoyo_domain(), &f->f_path, flags); } +/* + * tomoyo_security_ops is a "struct security_operations" which is used for + * registering TOMOYO. + */ static struct security_operations tomoyo_security_ops = { .name = "tomoyo", .cred_prepare = tomoyo_cred_prepare, diff --git a/security/tomoyo/tomoyo.h b/security/tomoyo/tomoyo.h index 41c6eba..0fd588a 100644 --- a/security/tomoyo/tomoyo.h +++ b/security/tomoyo/tomoyo.h @@ -17,13 +17,11 @@ struct path; struct inode; struct linux_binprm; struct pt_regs; -struct tomoyo_page_buffer; int tomoyo_check_file_perm(struct tomoyo_domain_info *domain, const char *filename, const u8 perm); int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain, - const struct tomoyo_path_info *filename, - struct tomoyo_page_buffer *buf); + const struct tomoyo_path_info *filename); int tomoyo_check_open_permission(struct tomoyo_domain_info *domain, struct path *path, const int flag); int tomoyo_check_1path_perm(struct tomoyo_domain_info *domain, @@ -90,17 +88,10 @@ static inline struct tomoyo_domain_info *tomoyo_domain(void) return current_cred()->security; } -/* Caller holds tasklist_lock spinlock. */ static inline struct tomoyo_domain_info *tomoyo_real_domain(struct task_struct *task) { - /***** CRITICAL SECTION START *****/ - const struct cred *cred = get_task_cred(task); - struct tomoyo_domain_info *domain = cred->security; - - put_cred(cred); - return domain; - /***** CRITICAL SECTION END *****/ + return task_cred_xxx(task, security); } #endif /* !defined(_SECURITY_TOMOYO_TOMOYO_H) */ diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c index fbf5c93..586965f 100644 --- a/sound/aoa/fabrics/layout.c +++ b/sound/aoa/fabrics/layout.c @@ -1037,7 +1037,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev) } ldev->selfptr_headphone.ptr = ldev; ldev->selfptr_lineout.ptr = ldev; - sdev->ofdev.dev.driver_data = ldev; + dev_set_drvdata(&sdev->ofdev.dev, ldev); list_add(&ldev->list, &layouts_list); layouts_list_items++; @@ -1081,7 +1081,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev) static int aoa_fabric_layout_remove(struct soundbus_dev *sdev) { - struct layout_dev *ldev = sdev->ofdev.dev.driver_data; + struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev); int i; for (i=0; iofdev.dev.driver_data; + struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev); if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off) ldev->gpio.methods->all_amps_off(&ldev->gpio); @@ -1124,7 +1124,7 @@ static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t sta static int aoa_fabric_layout_resume(struct soundbus_dev *sdev) { - struct layout_dev *ldev = sdev->ofdev.dev.driver_data; + struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev); if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off) ldev->gpio.methods->all_amps_restore(&ldev->gpio); diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c index 418c84c..4e3b819 100644 --- a/sound/aoa/soundbus/i2sbus/core.c +++ b/sound/aoa/soundbus/i2sbus/core.c @@ -358,14 +358,14 @@ static int i2sbus_probe(struct macio_dev* dev, const struct of_device_id *match) return -ENODEV; } - dev->ofdev.dev.driver_data = control; + dev_set_drvdata(&dev->ofdev.dev, control); return 0; } static int i2sbus_remove(struct macio_dev* dev) { - struct i2sbus_control *control = dev->ofdev.dev.driver_data; + struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev); struct i2sbus_dev *i2sdev, *tmp; list_for_each_entry_safe(i2sdev, tmp, &control->list, item) @@ -377,7 +377,7 @@ static int i2sbus_remove(struct macio_dev* dev) #ifdef CONFIG_PM static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state) { - struct i2sbus_control *control = dev->ofdev.dev.driver_data; + struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev); struct codec_info_item *cii; struct i2sbus_dev* i2sdev; int err, ret = 0; @@ -407,7 +407,7 @@ static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state) static int i2sbus_resume(struct macio_dev* dev) { - struct i2sbus_control *control = dev->ofdev.dev.driver_data; + struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev); struct codec_info_item *cii; struct i2sbus_dev* i2sdev; int err, ret = 0; diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 5c48e36..dc78272 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -1089,7 +1089,7 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) goto out; } - aaci->base = ioremap(dev->res.start, SZ_4K); + aaci->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!aaci->base) { ret = -ENOMEM; goto out; diff --git a/sound/core/Kconfig b/sound/core/Kconfig index 7bbdda0..6061fb5 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -205,3 +205,5 @@ config SND_PCM_XRUN_DEBUG config SND_VMASTER bool + +source "sound/core/seq/Kconfig" diff --git a/sound/core/init.c b/sound/core/init.c index fd56afe..d5d40d7 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -152,15 +152,8 @@ int snd_card_create(int idx, const char *xid, card = kzalloc(sizeof(*card) + extra_size, GFP_KERNEL); if (!card) return -ENOMEM; - if (xid) { - if (!snd_info_check_reserved_words(xid)) { - snd_printk(KERN_ERR - "given id string '%s' is reserved.\n", xid); - err = -EBUSY; - goto __error; - } + if (xid) strlcpy(card->id, xid, sizeof(card->id)); - } err = 0; mutex_lock(&snd_card_mutex); if (idx < 0) { @@ -483,22 +476,28 @@ int snd_card_free(struct snd_card *card) EXPORT_SYMBOL(snd_card_free); -static void choose_default_id(struct snd_card *card) +static void snd_card_set_id_no_lock(struct snd_card *card, const char *nid) { int i, len, idx_flag = 0, loops = SNDRV_CARDS; - char *id, *spos; + const char *spos, *src; + char *id; - id = spos = card->shortname; - while (*id != '\0') { - if (*id == ' ') - spos = id + 1; - id++; + if (nid == NULL) { + id = card->shortname; + spos = src = id; + while (*id != '\0') { + if (*id == ' ') + spos = id + 1; + id++; + } + } else { + spos = src = nid; } id = card->id; while (*spos != '\0' && !isalnum(*spos)) spos++; if (isdigit(*spos)) - *id++ = isalpha(card->shortname[0]) ? card->shortname[0] : 'D'; + *id++ = isalpha(src[0]) ? src[0] : 'D'; while (*spos != '\0' && (size_t)(id - card->id) < sizeof(card->id) - 1) { if (isalnum(*spos)) *id++ = *spos; @@ -513,7 +512,7 @@ static void choose_default_id(struct snd_card *card) while (1) { if (loops-- == 0) { - snd_printk(KERN_ERR "unable to choose default card id (%s)\n", id); + snd_printk(KERN_ERR "unable to set card id (%s)\n", id); strcpy(card->id, card->proc_root->name); return; } @@ -539,14 +538,33 @@ static void choose_default_id(struct snd_card *card) spos = id + len - 2; if ((size_t)len <= sizeof(card->id) - 2) spos++; - *spos++ = '_'; - *spos++ = '1'; - *spos++ = '\0'; + *(char *)spos++ = '_'; + *(char *)spos++ = '1'; + *(char *)spos++ = '\0'; idx_flag++; } } } +/** + * snd_card_set_id - set card identification name + * @card: soundcard structure + * @nid: new identification string + * + * This function sets the card identification and checks for name + * collisions. + */ +void snd_card_set_id(struct snd_card *card, const char *nid) +{ + /* check if user specified own card->id */ + if (card->id[0] != '\0') + return; + mutex_lock(&snd_card_mutex); + snd_card_set_id_no_lock(card, nid); + mutex_unlock(&snd_card_mutex); +} +EXPORT_SYMBOL(snd_card_set_id); + #ifndef CONFIG_SYSFS_DEPRECATED static ssize_t card_id_show_attr(struct device *dev, @@ -640,8 +658,7 @@ int snd_card_register(struct snd_card *card) mutex_unlock(&snd_card_mutex); return 0; } - if (card->id[0] == '\0') - choose_default_id(card); + snd_card_set_id_no_lock(card, card->id[0] == '\0' ? NULL : card->id); snd_cards[card->number] = card; mutex_unlock(&snd_card_mutex); init_info_for_card(card); diff --git a/sound/core/jack.c b/sound/core/jack.c index d54d1a0..f705eec 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -63,7 +63,7 @@ static int snd_jack_dev_register(struct snd_device *device) /* Default to the sound card device. */ if (!jack->input_dev->dev.parent) - jack->input_dev->dev.parent = card->dev; + jack->input_dev->dev.parent = snd_card_get_device_link(card); err = input_register_device(jack->input_dev); if (err == 0) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index dda000b..dbe406b 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -617,9 +618,7 @@ static long snd_pcm_oss_bytes(struct snd_pcm_substream *substream, long frames) #else { u64 bsize = (u64)runtime->oss.buffer_bytes * (u64)bytes; - u32 rem; - div64_32(&bsize, buffer_size, &rem); - return (long)bsize; + return div_u64(bsize, buffer_size); } #endif } diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index d659995..333e4dd 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -126,24 +127,37 @@ void snd_pcm_playback_silence(struct snd_pcm_substream *substream, snd_pcm_ufram } #ifdef CONFIG_SND_PCM_XRUN_DEBUG -#define xrun_debug(substream) ((substream)->pstr->xrun_debug) +#define xrun_debug(substream, mask) ((substream)->pstr->xrun_debug & (mask)) #else -#define xrun_debug(substream) 0 +#define xrun_debug(substream, mask) 0 #endif -#define dump_stack_on_xrun(substream) do { \ - if (xrun_debug(substream) > 1) \ - dump_stack(); \ +#define dump_stack_on_xrun(substream) do { \ + if (xrun_debug(substream, 2)) \ + dump_stack(); \ } while (0) +static void pcm_debug_name(struct snd_pcm_substream *substream, + char *name, size_t len) +{ + snprintf(name, len, "pcmC%dD%d%c:%d", + substream->pcm->card->number, + substream->pcm->device, + substream->stream ? 'c' : 'p', + substream->number); +} + static void xrun(struct snd_pcm_substream *substream) { + struct snd_pcm_runtime *runtime = substream->runtime; + + if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE) + snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp); snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); - if (xrun_debug(substream)) { - snd_printd(KERN_DEBUG "XRUN: pcmC%dD%d%c\n", - substream->pcm->card->number, - substream->pcm->device, - substream->stream ? 'c' : 'p'); + if (xrun_debug(substream, 1)) { + char name[16]; + pcm_debug_name(substream, name, sizeof(name)); + snd_printd(KERN_DEBUG "XRUN: %s\n", name); dump_stack_on_xrun(substream); } } @@ -154,16 +168,16 @@ snd_pcm_update_hw_ptr_pos(struct snd_pcm_substream *substream, { snd_pcm_uframes_t pos; - if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE) - snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp); pos = substream->ops->pointer(substream); if (pos == SNDRV_PCM_POS_XRUN) return pos; /* XRUN */ if (pos >= runtime->buffer_size) { if (printk_ratelimit()) { - snd_printd(KERN_ERR "BUG: stream = %i, pos = 0x%lx, " + char name[16]; + pcm_debug_name(substream, name, sizeof(name)); + snd_printd(KERN_ERR "BUG: %s, pos = 0x%lx, " "buffer size = 0x%lx, period size = 0x%lx\n", - substream->stream, pos, runtime->buffer_size, + name, pos, runtime->buffer_size, runtime->period_size); } pos = 0; @@ -197,7 +211,7 @@ static int snd_pcm_update_hw_ptr_post(struct snd_pcm_substream *substream, #define hw_ptr_error(substream, fmt, args...) \ do { \ - if (xrun_debug(substream)) { \ + if (xrun_debug(substream, 1)) { \ if (printk_ratelimit()) { \ snd_printd("PCM: " fmt, ##args); \ } \ @@ -251,7 +265,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) } /* Do jiffies check only in xrun_debug mode */ - if (!xrun_debug(substream)) + if (!xrun_debug(substream, 4)) goto no_jiffies_check; /* Skip the jiffies check for hardwares with BATCH flag. @@ -261,6 +275,9 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) if (runtime->hw.info & SNDRV_PCM_INFO_BATCH) goto no_jiffies_check; hdelta = new_hw_ptr - old_hw_ptr; + if (hdelta < runtime->delay) + goto no_jiffies_check; + hdelta -= runtime->delay; jdelta = jiffies - runtime->hw_ptr_jiffies; if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) { delta = jdelta / @@ -294,14 +311,20 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) hw_ptr_interrupt = new_hw_ptr - new_hw_ptr % runtime->period_size; } + runtime->hw_ptr_interrupt = hw_ptr_interrupt; + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && runtime->silence_size > 0) snd_pcm_playback_silence(substream, new_hw_ptr); + if (runtime->status->hw_ptr == new_hw_ptr) + return 0; + runtime->hw_ptr_base = hw_base; runtime->status->hw_ptr = new_hw_ptr; runtime->hw_ptr_jiffies = jiffies; - runtime->hw_ptr_interrupt = hw_ptr_interrupt; + if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE) + snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp); return snd_pcm_update_hw_ptr_post(substream, runtime); } @@ -342,8 +365,12 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; } /* Do jiffies check only in xrun_debug mode */ - if (xrun_debug(substream) && - ((delta * HZ) / runtime->rate) > jdelta + HZ/100) { + if (!xrun_debug(substream, 4)) + goto no_jiffies_check; + if (delta < runtime->delay) + goto no_jiffies_check; + delta -= runtime->delay; + if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) { hw_ptr_error(substream, "hw_ptr skipping! " "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n", @@ -352,13 +379,19 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) ((delta * HZ) / runtime->rate)); return 0; } + no_jiffies_check: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && runtime->silence_size > 0) snd_pcm_playback_silence(substream, new_hw_ptr); + if (runtime->status->hw_ptr == new_hw_ptr) + return 0; + runtime->hw_ptr_base = hw_base; runtime->status->hw_ptr = new_hw_ptr; runtime->hw_ptr_jiffies = jiffies; + if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE) + snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp); return snd_pcm_update_hw_ptr_post(substream, runtime); } @@ -452,7 +485,7 @@ static inline unsigned int muldiv32(unsigned int a, unsigned int b, *r = 0; return UINT_MAX; } - div64_32(&n, c, r); + n = div_u64_rem(n, c, r); if (n >= UINT_MAX) { *r = 0; return UINT_MAX; @@ -1524,6 +1557,23 @@ static int snd_pcm_lib_ioctl_channel_info(struct snd_pcm_substream *substream, return 0; } +static int snd_pcm_lib_ioctl_fifo_size(struct snd_pcm_substream *substream, + void *arg) +{ + struct snd_pcm_hw_params *params = arg; + snd_pcm_format_t format; + int channels, width; + + params->fifo_size = substream->runtime->hw.fifo_size; + if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_FIFO_IN_FRAMES)) { + format = params_format(params); + channels = params_channels(params); + width = snd_pcm_format_physical_width(format); + params->fifo_size /= width * channels; + } + return 0; +} + /** * snd_pcm_lib_ioctl - a generic PCM ioctl callback * @substream: the pcm substream instance @@ -1545,6 +1595,8 @@ int snd_pcm_lib_ioctl(struct snd_pcm_substream *substream, return snd_pcm_lib_ioctl_reset(substream, arg); case SNDRV_PCM_IOCTL1_CHANNEL_INFO: return snd_pcm_lib_ioctl_channel_info(substream, arg); + case SNDRV_PCM_IOCTL1_FIFO_SIZE: + return snd_pcm_lib_ioctl_fifo_size(substream, arg); } return -ENXIO; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index b5da656..84da3ba 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -312,9 +312,18 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream, hw = &substream->runtime->hw; if (!params->info) - params->info = hw->info; - if (!params->fifo_size) - params->fifo_size = hw->fifo_size; + params->info = hw->info & ~SNDRV_PCM_INFO_FIFO_IN_FRAMES; + if (!params->fifo_size) { + if (snd_mask_min(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT]) == + snd_mask_max(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT]) && + snd_mask_min(¶ms->masks[SNDRV_PCM_HW_PARAM_CHANNELS]) == + snd_mask_max(¶ms->masks[SNDRV_PCM_HW_PARAM_CHANNELS])) { + changed = substream->ops->ioctl(substream, + SNDRV_PCM_IOCTL1_FIFO_SIZE, params); + if (params < 0) + return changed; + } + } params->rmask = 0; return 0; } @@ -587,14 +596,15 @@ int snd_pcm_status(struct snd_pcm_substream *substream, if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { status->avail = snd_pcm_playback_avail(runtime); if (runtime->status->state == SNDRV_PCM_STATE_RUNNING || - runtime->status->state == SNDRV_PCM_STATE_DRAINING) + runtime->status->state == SNDRV_PCM_STATE_DRAINING) { status->delay = runtime->buffer_size - status->avail; - else + status->delay += runtime->delay; + } else status->delay = 0; } else { status->avail = snd_pcm_capture_avail(runtime); if (runtime->status->state == SNDRV_PCM_STATE_RUNNING) - status->delay = status->avail; + status->delay = status->avail + runtime->delay; else status->delay = 0; } @@ -2410,6 +2420,7 @@ static int snd_pcm_delay(struct snd_pcm_substream *substream, n = snd_pcm_playback_hw_avail(runtime); else n = snd_pcm_capture_avail(runtime); + n += runtime->delay; break; case SNDRV_PCM_STATE_XRUN: err = -EPIPE; diff --git a/sound/core/seq/Kconfig b/sound/core/seq/Kconfig new file mode 100644 index 0000000..b851fd8 --- /dev/null +++ b/sound/core/seq/Kconfig @@ -0,0 +1,16 @@ +# define SND_XXX_SEQ to min(SND_SEQUENCER,SND_XXX) + +config SND_RAWMIDI_SEQ + def_tristate SND_SEQUENCER && SND_RAWMIDI + +config SND_OPL3_LIB_SEQ + def_tristate SND_SEQUENCER && SND_OPL3_LIB + +config SND_OPL4_LIB_SEQ + def_tristate SND_SEQUENCER && SND_OPL4_LIB + +config SND_SBAWE_SEQ + def_tristate SND_SEQUENCER && SND_SBAWE + +config SND_EMU10K1_SEQ + def_tristate SND_SEQUENCER && SND_EMU10K1 diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile index 0695937..1bcb360 100644 --- a/sound/core/seq/Makefile +++ b/sound/core/seq/Makefile @@ -17,14 +17,6 @@ snd-seq-midi-event-objs := seq_midi_event.o snd-seq-dummy-objs := seq_dummy.o snd-seq-virmidi-objs := seq_virmidi.o -# -# this function returns: -# "m" - CONFIG_SND_SEQUENCER is m -# - CONFIG_SND_SEQUENCER is undefined -# otherwise parameter #1 value -# -sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1))) - obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o ifeq ($(CONFIG_SND_SEQUENCER_OSS),y) obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o @@ -33,8 +25,8 @@ obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o # Toplevel Module Dependency obj-$(CONFIG_SND_VIRMIDI) += snd-seq-virmidi.o snd-seq-midi-event.o -obj-$(call sequencer,$(CONFIG_SND_RAWMIDI)) += snd-seq-midi.o snd-seq-midi-event.o -obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o -obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o -obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-seq-midi-emul.o snd-seq-virmidi.o -obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-seq-midi-emul.o snd-seq-virmidi.o +obj-$(CONFIG_SND_RAWMIDI_SEQ) += snd-seq-midi.o snd-seq-midi-event.o +obj-$(CONFIG_SND_OPL3_LIB_SEQ) += snd-seq-midi-event.o snd-seq-midi-emul.o +obj-$(CONFIG_SND_OPL4_LIB_SEQ) += snd-seq-midi-event.o snd-seq-midi-emul.o +obj-$(CONFIG_SND_SBAWE_SEQ) += snd-seq-midi-emul.o snd-seq-virmidi.o +obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-seq-midi-emul.o snd-seq-virmidi.o diff --git a/sound/drivers/opl3/Makefile b/sound/drivers/opl3/Makefile index 19767a6..7f2c2a1 100644 --- a/sound/drivers/opl3/Makefile +++ b/sound/drivers/opl3/Makefile @@ -7,14 +7,6 @@ snd-opl3-lib-objs := opl3_lib.o opl3_synth.o snd-opl3-synth-y := opl3_seq.o opl3_midi.o opl3_drums.o snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o -# -# this function returns: -# "m" - CONFIG_SND_SEQUENCER is m -# - CONFIG_SND_SEQUENCER is undefined -# otherwise parameter #1 value -# -sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1))) - obj-$(CONFIG_SND_OPL3_LIB) += snd-opl3-lib.o obj-$(CONFIG_SND_OPL4_LIB) += snd-opl3-lib.o -obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-opl3-synth.o +obj-$(CONFIG_SND_OPL3_LIB_SEQ) += snd-opl3-synth.o diff --git a/sound/drivers/opl4/Makefile b/sound/drivers/opl4/Makefile index d178b39..b94009b 100644 --- a/sound/drivers/opl4/Makefile +++ b/sound/drivers/opl4/Makefile @@ -6,13 +6,5 @@ snd-opl4-lib-objs := opl4_lib.o opl4_mixer.o opl4_proc.o snd-opl4-synth-objs := opl4_seq.o opl4_synth.o yrw801.o -# -# this function returns: -# "m" - CONFIG_SND_SEQUENCER is m -# - CONFIG_SND_SEQUENCER is undefined -# otherwise parameter #1 value -# -sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1))) - obj-$(CONFIG_SND_OPL4_LIB) += snd-opl4-lib.o -obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-opl4-synth.o +obj-$(CONFIG_SND_OPL4_LIB_SEQ) += snd-opl4-synth.o diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index c6942a4..51a7e37 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -177,15 +177,18 @@ config SND_ES18XX will be called snd-es18xx. config SND_SC6000 - tristate "Gallant SC-6000, Audio Excel DSP 16" + tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16" depends on HAS_IOPORT select SND_WSS_LIB select SND_OPL3_LIB select SND_MPU401_UART help - Say Y here to include support for Gallant SC-6000 card and clones: + Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000 + cards and clones: Audio Excel DSP 16 and Zoltrix AV302. + These cards are based on CompuMedia ASC-9308 or ASC-9408 chips. + To compile this driver as a module, choose M here: the module will be called snd-sc6000. diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index 442b081..07df201 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -193,7 +193,7 @@ static int __devexit snd_es1688_remove(struct device *dev, unsigned int n) static struct isa_driver snd_es1688_driver = { .match = snd_es1688_match, .probe = snd_es1688_probe, - .remove = snd_es1688_remove, + .remove = __devexit_p(snd_es1688_remove), #if 0 /* FIXME */ .suspend = snd_es1688_suspend, .resume = snd_es1688_resume, diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c index 180a8de..65e4b18 100644 --- a/sound/isa/gus/gusextreme.c +++ b/sound/isa/gus/gusextreme.c @@ -348,7 +348,7 @@ static int __devexit snd_gusextreme_remove(struct device *dev, unsigned int n) static struct isa_driver snd_gusextreme_driver = { .match = snd_gusextreme_match, .probe = snd_gusextreme_probe, - .remove = snd_gusextreme_remove, + .remove = __devexit_p(snd_gusextreme_remove), #if 0 /* FIXME */ .suspend = snd_gusextreme_suspend, .resume = snd_gusextreme_resume, diff --git a/sound/isa/sb/Makefile b/sound/isa/sb/Makefile index 1098a56..faeffce 100644 --- a/sound/isa/sb/Makefile +++ b/sound/isa/sb/Makefile @@ -13,14 +13,6 @@ snd-sbawe-objs := sbawe.o emu8000.o snd-emu8000-synth-objs := emu8000_synth.o emu8000_callback.o emu8000_patch.o emu8000_pcm.o snd-es968-objs := es968.o -# -# this function returns: -# "m" - CONFIG_SND_SEQUENCER is m -# - CONFIG_SND_SEQUENCER is undefined -# otherwise parameter #1 value -# -sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1))) - # Toplevel Module Dependency obj-$(CONFIG_SND_SB_COMMON) += snd-sb-common.o obj-$(CONFIG_SND_SB16_DSP) += snd-sb16-dsp.o @@ -33,4 +25,4 @@ ifeq ($(CONFIG_SND_SB16_CSP),y) obj-$(CONFIG_SND_SB16) += snd-sb16-csp.o obj-$(CONFIG_SND_SBAWE) += snd-sb16-csp.o endif -obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emu8000-synth.o +obj-$(CONFIG_SND_SBAWE_SEQ) += snd-emu8000-synth.o diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c index 7820106..9a8bbf6 100644 --- a/sound/isa/sc6000.c +++ b/sound/isa/sc6000.c @@ -2,6 +2,8 @@ * Driver for Gallant SC-6000 soundcard. This card is also known as * Audio Excel DSP 16 or Zoltrix AV302. * These cards use CompuMedia ASC-9308 chip + AD1848 codec. + * SC-6600 and SC-7000 cards are also supported. They are based on + * CompuMedia ASC-9408 chip and CS4231 codec. * * Copyright (C) 2007 Krzysztof Helt * @@ -54,6 +56,7 @@ static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x300, 0x310, 0x320, 0x330 */ static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5, 7, 9, 10, 0 */ static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0, 1, 3 */ +static bool joystick[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = false }; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for sc-6000 based soundcard."); @@ -73,6 +76,8 @@ module_param_array(mpu_irq, int, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver."); module_param_array(dma, int, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver."); +module_param_array(joystick, bool, NULL, 0444); +MODULE_PARM_DESC(joystick, "Enable gameport."); /* * Commands of SC6000's DSP (SBPRO+special). @@ -191,7 +196,7 @@ static __devinit unsigned char sc6000_mpu_irq_to_softcfg(int mpu_irq) return val; } -static __devinit int sc6000_wait_data(char __iomem *vport) +static int sc6000_wait_data(char __iomem *vport) { int loop = 1000; unsigned char val = 0; @@ -206,7 +211,7 @@ static __devinit int sc6000_wait_data(char __iomem *vport) return -EAGAIN; } -static __devinit int sc6000_read(char __iomem *vport) +static int sc6000_read(char __iomem *vport) { if (sc6000_wait_data(vport)) return -EBUSY; @@ -215,7 +220,7 @@ static __devinit int sc6000_read(char __iomem *vport) } -static __devinit int sc6000_write(char __iomem *vport, int cmd) +static int sc6000_write(char __iomem *vport, int cmd) { unsigned char val; int loop = 500000; @@ -276,8 +281,33 @@ static int __devinit sc6000_dsp_reset(char __iomem *vport) } /* detection and initialization */ -static int __devinit sc6000_cfg_write(char __iomem *vport, - unsigned char softcfg) +static int __devinit sc6000_hw_cfg_write(char __iomem *vport, const int *cfg) +{ + if (sc6000_write(vport, COMMAND_6C) < 0) { + snd_printk(KERN_WARNING "CMD 0x%x: failed!\n", COMMAND_6C); + return -EIO; + } + if (sc6000_write(vport, COMMAND_5C) < 0) { + snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_5C); + return -EIO; + } + if (sc6000_write(vport, cfg[0]) < 0) { + snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[0]); + return -EIO; + } + if (sc6000_write(vport, cfg[1]) < 0) { + snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[1]); + return -EIO; + } + if (sc6000_write(vport, COMMAND_C5) < 0) { + snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_C5); + return -EIO; + } + + return 0; +} + +static int sc6000_cfg_write(char __iomem *vport, unsigned char softcfg) { if (sc6000_write(vport, WRITE_MDIRQ_CFG)) { @@ -291,7 +321,7 @@ static int __devinit sc6000_cfg_write(char __iomem *vport, return 0; } -static int __devinit sc6000_setup_board(char __iomem *vport, int config) +static int sc6000_setup_board(char __iomem *vport, int config) { int loop = 10; @@ -334,16 +364,39 @@ static int __devinit sc6000_init_mss(char __iomem *vport, int config, return 0; } -static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma, - char __iomem *vmss_port, int mpu_irq) +static void __devinit sc6000_hw_cfg_encode(char __iomem *vport, int *cfg, + long xport, long xmpu, + long xmss_port, int joystick) +{ + cfg[0] = 0; + cfg[1] = 0; + if (xport == 0x240) + cfg[0] |= 1; + if (xmpu != SNDRV_AUTO_PORT) { + cfg[0] |= (xmpu & 0x30) >> 2; + cfg[1] |= 0x20; + } + if (xmss_port == 0xe80) + cfg[0] |= 0x10; + cfg[0] |= 0x40; /* always set */ + if (!joystick) + cfg[0] |= 0x02; + cfg[1] |= 0x80; /* enable WSS system */ + cfg[1] &= ~0x40; /* disable IDE */ + snd_printd("hw cfg %x, %x\n", cfg[0], cfg[1]); +} + +static int __devinit sc6000_init_board(char __iomem *vport, + char __iomem *vmss_port, int dev) { char answer[15]; char version[2]; - int mss_config = sc6000_irq_to_softcfg(irq) | - sc6000_dma_to_softcfg(dma); + int mss_config = sc6000_irq_to_softcfg(irq[dev]) | + sc6000_dma_to_softcfg(dma[dev]); int config = mss_config | - sc6000_mpu_irq_to_softcfg(mpu_irq); + sc6000_mpu_irq_to_softcfg(mpu_irq[dev]); int err; + int old = 0; err = sc6000_dsp_reset(vport); if (err < 0) { @@ -360,7 +413,6 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma, /* * My SC-6000 card return "SC-6000" in DSPCopyright, so * if we have something different, we have to be warned. - * Mine returns "SC-6000A " - KH */ if (strncmp("SC-6000", answer, 7)) snd_printk(KERN_WARNING "Warning: non SC-6000 audio card!\n"); @@ -372,13 +424,32 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma, printk(KERN_INFO PFX "Detected model: %s, DSP version %d.%d\n", answer, version[0], version[1]); - /* - * 0x0A == (IRQ 7, DMA 1, MIRQ 0) - */ - err = sc6000_cfg_write(vport, 0x0a); + /* set configuration */ + sc6000_write(vport, COMMAND_5C); + if (sc6000_read(vport) < 0) + old = 1; + + if (!old) { + int cfg[2]; + sc6000_hw_cfg_encode(vport, &cfg[0], port[dev], mpu_port[dev], + mss_port[dev], joystick[dev]); + if (sc6000_hw_cfg_write(vport, cfg) < 0) { + snd_printk(KERN_ERR "sc6000_hw_cfg_write: failed!\n"); + return -EIO; + } + } + err = sc6000_setup_board(vport, config); if (err < 0) { - snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n"); - return -EFAULT; + snd_printk(KERN_ERR "sc6000_setup_board: failed!\n"); + return -ENODEV; + } + + sc6000_dsp_reset(vport); + + if (!old) { + sc6000_write(vport, COMMAND_60); + sc6000_write(vport, 0x02); + sc6000_dsp_reset(vport); } err = sc6000_setup_board(vport, config); @@ -386,10 +457,9 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma, snd_printk(KERN_ERR "sc6000_setup_board: failed!\n"); return -ENODEV; } - err = sc6000_init_mss(vport, config, vmss_port, mss_config); if (err < 0) { - snd_printk(KERN_ERR "Can not initialize " + snd_printk(KERN_ERR "Cannot initialize " "Microsoft Sound System mode.\n"); return -ENODEV; } @@ -485,14 +555,16 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev) struct snd_card *card; struct snd_wss *chip; struct snd_opl3 *opl3; - char __iomem *vport; + char __iomem **vport; char __iomem *vmss_port; - err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(vport), + &card); if (err < 0) return err; + vport = card->private_data; if (xirq == SNDRV_AUTO_IRQ) { xirq = snd_legacy_find_free_irq(possible_irqs); if (xirq < 0) { @@ -517,8 +589,8 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev) err = -EBUSY; goto err_exit; } - vport = devm_ioport_map(devptr, port[dev], 0x10); - if (!vport) { + *vport = devm_ioport_map(devptr, port[dev], 0x10); + if (*vport == NULL) { snd_printk(KERN_ERR PFX "I/O port cannot be iomaped.\n"); err = -EBUSY; @@ -533,7 +605,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev) goto err_unmap1; } vmss_port = devm_ioport_map(devptr, mss_port[dev], 4); - if (!vport) { + if (!vmss_port) { snd_printk(KERN_ERR PFX "MSS port I/O cannot be iomaped.\n"); err = -EBUSY; @@ -544,7 +616,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev) port[dev], xirq, xdma, mpu_irq[dev] == SNDRV_AUTO_IRQ ? 0 : mpu_irq[dev]); - err = sc6000_init_board(vport, xirq, xdma, vmss_port, mpu_irq[dev]); + err = sc6000_init_board(*vport, vmss_port, dev); if (err < 0) goto err_unmap2; @@ -552,7 +624,6 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev) WSS_HW_DETECT, 0, &chip); if (err < 0) goto err_unmap2; - card->private_data = chip; err = snd_wss_pcm(chip, 0, NULL); if (err < 0) { @@ -608,6 +679,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev) return 0; err_unmap2: + sc6000_setup_board(*vport, 0); release_region(mss_port[dev], 4); err_unmap1: release_region(port[dev], 0x10); @@ -618,11 +690,17 @@ err_exit: static int __devexit snd_sc6000_remove(struct device *devptr, unsigned int dev) { + struct snd_card *card = dev_get_drvdata(devptr); + char __iomem **vport = card->private_data; + + if (sc6000_setup_board(*vport, 0) < 0) + snd_printk(KERN_WARNING "sc6000_setup_board failed on exit!\n"); + release_region(port[dev], 0x10); release_region(mss_port[dev], 4); - snd_card_free(dev_get_drvdata(devptr)); dev_set_drvdata(devptr, NULL); + snd_card_free(card); return 0; } diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c index 66f3b48..e497525 100644 --- a/sound/mips/sgio2audio.c +++ b/sound/mips/sgio2audio.c @@ -619,8 +619,7 @@ static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream, /* hw_free callback */ static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream) { - if (substream->runtime->dma_area) - vfree(substream->runtime->dma_area); + vfree(substream->runtime->dma_area); substream->runtime->dma_area = NULL; return 0; } diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 1ca7427..bcf2a06 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -561,7 +561,7 @@ endif # SOUND_OSS config SOUND_SH_DAC_AUDIO tristate "SuperH DAC audio support" - depends on CPU_SH3 + depends on CPU_SH3 && HIGH_RES_TIMERS config SOUND_SH_DAC_AUDIO_CHANNEL int "DAC channel" diff --git a/sound/oss/msnd.c b/sound/oss/msnd.c index e4282d9..21eb6dc 100644 --- a/sound/oss/msnd.c +++ b/sound/oss/msnd.c @@ -100,7 +100,7 @@ void msnd_fifo_free(msnd_fifo *f) int msnd_fifo_alloc(msnd_fifo *f, size_t n) { msnd_fifo_free(f); - f->data = (char *)vmalloc(n); + f->data = vmalloc(n); f->n = n; f->tail = 0; f->head = 0; diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c index 78cfb66..b2ed875 100644 --- a/sound/oss/sh_dac_audio.c +++ b/sound/oss/sh_dac_audio.c @@ -18,47 +18,36 @@ #include #include #include +#include #include #include #include #include #include -#include -#include +#include #include #include #include #define MODNAME "sh_dac_audio" -#define TMU_TOCR_INIT 0x00 - -#define TMU1_TCR_INIT 0x0020 /* Clock/4, rising edge; interrupt on */ -#define TMU1_TSTR_INIT 0x02 /* Bit to turn on TMU1 */ - #define BUFFER_SIZE 48000 static int rate; static int empty; static char *data_buffer, *buffer_begin, *buffer_end; static int in_use, device_major; +static struct hrtimer hrtimer; +static ktime_t wakeups_per_second; static void dac_audio_start_timer(void) { - u8 tstr; - - tstr = ctrl_inb(TMU_TSTR); - tstr |= TMU1_TSTR_INIT; - ctrl_outb(tstr, TMU_TSTR); + hrtimer_start(&hrtimer, wakeups_per_second, HRTIMER_MODE_REL); } static void dac_audio_stop_timer(void) { - u8 tstr; - - tstr = ctrl_inb(TMU_TSTR); - tstr &= ~TMU1_TSTR_INIT; - ctrl_outb(tstr, TMU_TSTR); + hrtimer_cancel(&hrtimer); } static void dac_audio_reset(void) @@ -77,38 +66,30 @@ static void dac_audio_sync(void) static void dac_audio_start(void) { if (mach_is_hp6xx()) { - u16 v = inw(HD64461_GPADR); + u16 v = __raw_readw(HD64461_GPADR); v &= ~HD64461_GPADR_SPEAKER; - outw(v, HD64461_GPADR); + __raw_writew(v, HD64461_GPADR); } sh_dac_enable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); - ctrl_outw(TMU1_TCR_INIT, TMU1_TCR); } static void dac_audio_stop(void) { dac_audio_stop_timer(); if (mach_is_hp6xx()) { - u16 v = inw(HD64461_GPADR); + u16 v = __raw_readw(HD64461_GPADR); v |= HD64461_GPADR_SPEAKER; - outw(v, HD64461_GPADR); + __raw_writew(v, HD64461_GPADR); } - sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); + sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); sh_dac_disable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); } static void dac_audio_set_rate(void) { - unsigned long interval; - struct clk *clk; - - clk = clk_get(NULL, "module_clk"); - interval = (clk_get_rate(clk) / 4) / rate; - clk_put(clk); - ctrl_outl(interval, TMU1_TCOR); - ctrl_outl(interval, TMU1_TCNT); + wakeups_per_second = ktime_set(0, 1000000000 / rate); } static int dac_audio_ioctl(struct inode *inode, struct file *file, @@ -265,32 +246,26 @@ const struct file_operations dac_audio_fops = { .release = dac_audio_release, }; -static irqreturn_t timer1_interrupt(int irq, void *dev) +static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle) { - unsigned long timer_status; - - timer_status = ctrl_inw(TMU1_TCR); - timer_status &= ~0x100; - ctrl_outw(timer_status, TMU1_TCR); - if (!empty) { sh_dac_output(*buffer_begin, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); buffer_begin++; if (buffer_begin == data_buffer + BUFFER_SIZE) buffer_begin = data_buffer; - if (buffer_begin == buffer_end) { + if (buffer_begin == buffer_end) empty = 1; - dac_audio_stop_timer(); - } } - return IRQ_HANDLED; + + if (!empty) + hrtimer_start(&hrtimer, wakeups_per_second, HRTIMER_MODE_REL); + + return HRTIMER_NORESTART; } static int __init dac_audio_init(void) { - int retval; - if ((device_major = register_sound_dsp(&dac_audio_fops, -1)) < 0) { printk(KERN_ERR "Cannot register dsp device"); return device_major; @@ -306,21 +281,25 @@ static int __init dac_audio_init(void) rate = 8000; dac_audio_set_rate(); - retval = - request_irq(TIMER1_IRQ, timer1_interrupt, IRQF_DISABLED, MODNAME, 0); - if (retval < 0) { - printk(KERN_ERR "sh_dac_audio: IRQ %d request failed\n", - TIMER1_IRQ); - return retval; - } + /* Today: High Resolution Timer driven DAC playback. + * The timer callback gets called once per sample. Ouch. + * + * Future: A much better approach would be to use the + * SH7720 CMT+DMAC+DAC hardware combination like this: + * - Program sample rate using CMT0 or CMT1 + * - Program DMAC to use CMT for timing and output to DAC + * - Play sound using DMAC, let CPU sleep. + * - While at it, rewrite this driver to use ALSA. + */ + + hrtimer_init(&hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + hrtimer.function = sh_dac_audio_timer; return 0; } static void __exit dac_audio_exit(void) { - free_irq(TIMER1_IRQ, 0); - unregister_sound_dsp(device_major); kfree((void *)data_buffer); } diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index 6055fd6..e924492 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -935,7 +935,7 @@ snd_harmony_create(struct snd_card *card, h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE); if (h->iobase == NULL) { printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n", - padev->hpa.start); + (unsigned long)padev->hpa.start); err = -EBUSY; goto free_and_ret; } @@ -1020,7 +1020,7 @@ static struct parisc_driver snd_harmony_driver = { .name = "harmony", .id_table = snd_harmony_devtable, .probe = snd_harmony_probe, - .remove = snd_harmony_remove, + .remove = __devexit_p(snd_harmony_remove), }; static int __init diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 93422e3..748f6b7 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -275,6 +275,16 @@ config SND_CS5535AUDIO To compile this driver as a module, choose M here: the module will be called snd-cs5535audio. +config SND_CTXFI + tristate "Creative Sound Blaster X-Fi" + select SND_PCM + help + If you want to use soundcards based on Creative Sound Blastr X-Fi + boards with 20k1 or 20k2 chips, say Y here. + + To compile this driver as a module, choose M here: the module + will be called snd-ctxfi. + config SND_DARLA20 tristate "(Echoaudio) Darla20" select FW_LOADER @@ -532,6 +542,9 @@ config SND_HDSP To compile this driver as a module, choose M here: the module will be called snd-hdsp. +comment "Don't forget to add built-in firmwares for HDSP driver" + depends on SND_HDSP=y + config SND_HDSPM tristate "RME Hammerfall DSP MADI" select SND_HWDEP @@ -622,6 +635,16 @@ config SND_KORG1212 To compile this driver as a module, choose M here: the module will be called snd-korg1212. +config SND_LX6464ES + tristate "Digigram LX6464ES" + select SND_PCM + help + Say Y here to include support for Digigram LX6464ES boards. + + To compile this driver as a module, choose M here: the module + will be called snd-lx6464es. + + config SND_MAESTRO3 tristate "ESS Allegro/Maestro3" select SND_AC97_CODEC @@ -764,8 +787,8 @@ config SND_VIRTUOSO select SND_OXYGEN_LIB help Say Y here to include support for sound cards based on the - Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, and - Essence STX. + Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, + Essence ST (Deluxe), and Essence STX. Support for the HDAV1.3 (Deluxe) is very experimental. To compile this driver as a module, choose M here: the module diff --git a/sound/pci/Makefile b/sound/pci/Makefile index 65b25d2..ecfc609 100644 --- a/sound/pci/Makefile +++ b/sound/pci/Makefile @@ -59,9 +59,11 @@ obj-$(CONFIG_SND) += \ ali5451/ \ au88x0/ \ aw2/ \ + ctxfi/ \ ca0106/ \ cs46xx/ \ cs5535audio/ \ + lx6464es/ \ echoaudio/ \ emu10k1/ \ hda/ \ diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c index 3906f5a..23f49f3 100644 --- a/sound/pci/au88x0/au88x0_core.c +++ b/sound/pci/au88x0/au88x0_core.c @@ -1255,8 +1255,8 @@ static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma) int temp; temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2)); - temp = (dma->period_virt * dma->period_bytes) + (temp & POS_MASK); - return (temp); + temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1)); + return temp; } static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma) @@ -1504,8 +1504,7 @@ static int inline vortex_wtdma_getlinearpos(vortex_t * vortex, int wtdma) int temp; temp = hwread(vortex->mmio, VORTEX_WTDMA_STAT + (wtdma << 2)); - //temp = (temp & POS_MASK) + (((temp>>WT_SUBBUF_SHIFT) & WT_SUBBUF_MASK)*(dma->cfg0&POS_MASK)); - temp = (temp & POS_MASK) + ((dma->period_virt) * (dma->period_bytes)); + temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1)); return temp; } @@ -2441,7 +2440,8 @@ static irqreturn_t vortex_interrupt(int irq, void *dev_id) spin_lock(&vortex->lock); for (i = 0; i < NR_ADB; i++) { if (vortex->dma_adb[i].fifo_status == FIFO_START) { - if (vortex_adbdma_bufshift(vortex, i)) ; + if (!vortex_adbdma_bufshift(vortex, i)) + continue; spin_unlock(&vortex->lock); snd_pcm_period_elapsed(vortex->dma_adb[i]. substream); diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c index 6a3891a..296123a 100644 --- a/sound/pci/aw2/aw2-saa7146.c +++ b/sound/pci/aw2/aw2-saa7146.c @@ -108,7 +108,7 @@ void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip, #endif /* WS0_CTRL, WS0_SYNC: input TSL1, I2S */ - /* At initialization WS1 and WS2 are disbaled (configured as input */ + /* At initialization WS1 and WS2 are disabled (configured as input) */ acon1 |= 0 * WS1_CTRL; acon1 |= 0 * WS2_CTRL; diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index ce3f2e9..24585c6 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -810,6 +810,8 @@ static struct pci_device_id snd_bt87x_ids[] = { BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC), /* Voodoo TV 200 */ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC), + /* Askey Computer Corp. MagicTView'99 */ + BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x144f, 0x3000, GENERIC), /* AVerMedia Studio No. 103, 203, ...? */ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1461, 0x0003, AVPHONE98), /* Prolink PixelView PV-M4900 */ diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index bfac30f..57b992a 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -1319,7 +1319,6 @@ static int __devinit snd_ca0106_pcm(struct snd_ca0106 *emu, int device) } pcm->info_flags = 0; - pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX; strcpy(pcm->name, "CA0106"); for(substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c index c111efe..c8c6f43 100644 --- a/sound/pci/ca0106/ca0106_mixer.c +++ b/sound/pci/ca0106/ca0106_mixer.c @@ -739,7 +739,7 @@ static int __devinit rename_ctl(struct snd_card *card, const char *src, const ch } while (0) static __devinitdata -DECLARE_TLV_DB_SCALE(snd_ca0106_master_db_scale, -6375, 50, 1); +DECLARE_TLV_DB_SCALE(snd_ca0106_master_db_scale, -6375, 25, 1); static char *slave_vols[] __devinitdata = { "Analog Front Playback Volume", @@ -841,6 +841,9 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu) snd_ca0106_master_db_scale); if (!vmaster) return -ENOMEM; + err = snd_ctl_add(card, vmaster); + if (err < 0) + return err; add_slaves(card, vmaster, slave_vols); if (emu->details->spi_dac == 1) { @@ -848,8 +851,13 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu) NULL); if (!vmaster) return -ENOMEM; + err = snd_ctl_add(card, vmaster); + if (err < 0) + return err; add_slaves(card, vmaster, slave_sws); } + + strcpy(card->mixername, "CA0106"); return 0; } diff --git a/sound/pci/ctxfi/Makefile b/sound/pci/ctxfi/Makefile new file mode 100644 index 0000000..15075f8 --- /dev/null +++ b/sound/pci/ctxfi/Makefile @@ -0,0 +1,5 @@ +snd-ctxfi-objs := xfi.o ctatc.o ctvmem.o ctpcm.o ctmixer.o ctresource.o \ + ctsrc.o ctamixer.o ctdaio.o ctimap.o cthardware.o cttimer.o \ + cthw20k2.o cthw20k1.o + +obj-$(CONFIG_SND_CTXFI) += snd-ctxfi.o diff --git a/sound/pci/ctxfi/ct20k1reg.h b/sound/pci/ctxfi/ct20k1reg.h new file mode 100644 index 0000000..f2e34e3 --- /dev/null +++ b/sound/pci/ctxfi/ct20k1reg.h @@ -0,0 +1,636 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + */ + +#ifndef CT20K1REG_H +#define CT20k1REG_H + +/* 20k1 registers */ +#define DSPXRAM_START 0x000000 +#define DSPXRAM_END 0x013FFC +#define DSPAXRAM_START 0x020000 +#define DSPAXRAM_END 0x023FFC +#define DSPYRAM_START 0x040000 +#define DSPYRAM_END 0x04FFFC +#define DSPAYRAM_START 0x020000 +#define DSPAYRAM_END 0x063FFC +#define DSPMICRO_START 0x080000 +#define DSPMICRO_END 0x0B3FFC +#define DSP0IO_START 0x100000 +#define DSP0IO_END 0x101FFC +#define AUDIORINGIPDSP0_START 0x100000 +#define AUDIORINGIPDSP0_END 0x1003FC +#define AUDIORINGOPDSP0_START 0x100400 +#define AUDIORINGOPDSP0_END 0x1007FC +#define AUDPARARINGIODSP0_START 0x100800 +#define AUDPARARINGIODSP0_END 0x100BFC +#define DSP0LOCALHWREG_START 0x100C00 +#define DSP0LOCALHWREG_END 0x100C3C +#define DSP0XYRAMAGINDEX_START 0x100C40 +#define DSP0XYRAMAGINDEX_END 0x100C5C +#define DSP0XYRAMAGMDFR_START 0x100C60 +#define DSP0XYRAMAGMDFR_END 0x100C7C +#define DSP0INTCONTLVEC_START 0x100C80 +#define DSP0INTCONTLVEC_END 0x100CD8 +#define INTCONTLGLOBALREG_START 0x100D1C +#define INTCONTLGLOBALREG_END 0x100D3C +#define HOSTINTFPORTADDRCONTDSP0 0x100D40 +#define HOSTINTFPORTDATADSP0 0x100D44 +#define TIME0PERENBDSP0 0x100D60 +#define TIME0COUNTERDSP0 0x100D64 +#define TIME1PERENBDSP0 0x100D68 +#define TIME1COUNTERDSP0 0x100D6C +#define TIME2PERENBDSP0 0x100D70 +#define TIME2COUNTERDSP0 0x100D74 +#define TIME3PERENBDSP0 0x100D78 +#define TIME3COUNTERDSP0 0x100D7C +#define XRAMINDOPERREFNOUP_STARTDSP0 0x100D80 +#define XRAMINDOPERREFNOUP_ENDDSP0 0x100D9C +#define XRAMINDOPERREFUP_STARTDSP0 0x100DA0 +#define XRAMINDOPERREFUP_ENDDSP0 0x100DBC +#define YRAMINDOPERREFNOUP_STARTDSP0 0x100DC0 +#define YRAMINDOPERREFNOUP_ENDDSP0 0x100DDC +#define YRAMINDOPERREFUP_STARTDSP0 0x100DE0 +#define YRAMINDOPERREFUP_ENDDSP0 0x100DFC +#define DSP0CONDCODE 0x100E00 +#define DSP0STACKFLAG 0x100E04 +#define DSP0PROGCOUNTSTACKPTREG 0x100E08 +#define DSP0PROGCOUNTSTACKDATAREG 0x100E0C +#define DSP0CURLOOPADDRREG 0x100E10 +#define DSP0CURLOOPCOUNT 0x100E14 +#define DSP0TOPLOOPCOUNTSTACK 0x100E18 +#define DSP0TOPLOOPADDRSTACK 0x100E1C +#define DSP0LOOPSTACKPTR 0x100E20 +#define DSP0STASSTACKDATAREG 0x100E24 +#define DSP0STASSTACKPTR 0x100E28 +#define DSP0PROGCOUNT 0x100E2C +#define GLOBDSPDEBGREG 0x100E30 +#define GLOBDSPBREPTRREG 0x100E30 +#define DSP0XYRAMBASE_START 0x100EA0 +#define DSP0XYRAMBASE_END 0x100EBC +#define DSP0XYRAMLENG_START 0x100EC0 +#define DSP0XYRAMLENG_END 0x100EDC +#define SEMAPHOREREGDSP0 0x100EE0 +#define DSP0INTCONTMASKREG 0x100EE4 +#define DSP0INTCONTPENDREG 0x100EE8 +#define DSP0INTCONTSERVINT 0x100EEC +#define DSPINTCONTEXTINTMODREG 0x100EEC +#define GPIODSP0 0x100EFC +#define DMADSPBASEADDRREG_STARTDSP0 0x100F00 +#define DMADSPBASEADDRREG_ENDDSP0 0x100F1C +#define DMAHOSTBASEADDRREG_STARTDSP0 0x100F20 +#define DMAHOSTBASEADDRREG_ENDDSP0 0x100F3C +#define DMADSPCURADDRREG_STARTDSP0 0x100F40 +#define DMADSPCURADDRREG_ENDDSP0 0x100F5C +#define DMAHOSTCURADDRREG_STARTDSP0 0x100F60 +#define DMAHOSTCURADDRREG_ENDDSP0 0x100F7C +#define DMATANXCOUNTREG_STARTDSP0 0x100F80 +#define DMATANXCOUNTREG_ENDDSP0 0x100F9C +#define DMATIMEBUGREG_STARTDSP0 0x100FA0 +#define DMATIMEBUGREG_ENDDSP0 0x100FAC +#define DMACNTLMODFREG_STARTDSP0 0x100FA0 +#define DMACNTLMODFREG_ENDDSP0 0x100FAC + +#define DMAGLOBSTATSREGDSP0 0x100FEC +#define DSP0XGPRAM_START 0x101000 +#define DSP0XGPRAM_END 0x1017FC +#define DSP0YGPRAM_START 0x101800 +#define DSP0YGPRAM_END 0x101FFC + + + + +#define AUDIORINGIPDSP1_START 0x102000 +#define AUDIORINGIPDSP1_END 0x1023FC +#define AUDIORINGOPDSP1_START 0x102400 +#define AUDIORINGOPDSP1_END 0x1027FC +#define AUDPARARINGIODSP1_START 0x102800 +#define AUDPARARINGIODSP1_END 0x102BFC +#define DSP1LOCALHWREG_START 0x102C00 +#define DSP1LOCALHWREG_END 0x102C3C +#define DSP1XYRAMAGINDEX_START 0x102C40 +#define DSP1XYRAMAGINDEX_END 0x102C5C +#define DSP1XYRAMAGMDFR_START 0x102C60 +#define DSP1XYRAMAGMDFR_END 0x102C7C +#define DSP1INTCONTLVEC_START 0x102C80 +#define DSP1INTCONTLVEC_END 0x102CD8 +#define HOSTINTFPORTADDRCONTDSP1 0x102D40 +#define HOSTINTFPORTDATADSP1 0x102D44 +#define TIME0PERENBDSP1 0x102D60 +#define TIME0COUNTERDSP1 0x102D64 +#define TIME1PERENBDSP1 0x102D68 +#define TIME1COUNTERDSP1 0x102D6C +#define TIME2PERENBDSP1 0x102D70 +#define TIME2COUNTERDSP1 0x102D74 +#define TIME3PERENBDSP1 0x102D78 +#define TIME3COUNTERDSP1 0x102D7C +#define XRAMINDOPERREFNOUP_STARTDSP1 0x102D80 +#define XRAMINDOPERREFNOUP_ENDDSP1 0x102D9C +#define XRAMINDOPERREFUP_STARTDSP1 0x102DA0 +#define XRAMINDOPERREFUP_ENDDSP1 0x102DBC +#define YRAMINDOPERREFNOUP_STARTDSP1 0x102DC0 +#define YRAMINDOPERREFNOUP_ENDDSP1 0x102DDC +#define YRAMINDOPERREFUP_STARTDSP1 0x102DE0 +#define YRAMINDOPERREFUP_ENDDSP1 0x102DFC + +#define DSP1CONDCODE 0x102E00 +#define DSP1STACKFLAG 0x102E04 +#define DSP1PROGCOUNTSTACKPTREG 0x102E08 +#define DSP1PROGCOUNTSTACKDATAREG 0x102E0C +#define DSP1CURLOOPADDRREG 0x102E10 +#define DSP1CURLOOPCOUNT 0x102E14 +#define DSP1TOPLOOPCOUNTSTACK 0x102E18 +#define DSP1TOPLOOPADDRSTACK 0x102E1C +#define DSP1LOOPSTACKPTR 0x102E20 +#define DSP1STASSTACKDATAREG 0x102E24 +#define DSP1STASSTACKPTR 0x102E28 +#define DSP1PROGCOUNT 0x102E2C +#define DSP1XYRAMBASE_START 0x102EA0 +#define DSP1XYRAMBASE_END 0x102EBC +#define DSP1XYRAMLENG_START 0x102EC0 +#define DSP1XYRAMLENG_END 0x102EDC +#define SEMAPHOREREGDSP1 0x102EE0 +#define DSP1INTCONTMASKREG 0x102EE4 +#define DSP1INTCONTPENDREG 0x102EE8 +#define DSP1INTCONTSERVINT 0x102EEC +#define GPIODSP1 0x102EFC +#define DMADSPBASEADDRREG_STARTDSP1 0x102F00 +#define DMADSPBASEADDRREG_ENDDSP1 0x102F1C +#define DMAHOSTBASEADDRREG_STARTDSP1 0x102F20 +#define DMAHOSTBASEADDRREG_ENDDSP1 0x102F3C +#define DMADSPCURADDRREG_STARTDSP1 0x102F40 +#define DMADSPCURADDRREG_ENDDSP1 0x102F5C +#define DMAHOSTCURADDRREG_STARTDSP1 0x102F60 +#define DMAHOSTCURADDRREG_ENDDSP1 0x102F7C +#define DMATANXCOUNTREG_STARTDSP1 0x102F80 +#define DMATANXCOUNTREG_ENDDSP1 0x102F9C +#define DMATIMEBUGREG_STARTDSP1 0x102FA0 +#define DMATIMEBUGREG_ENDDSP1 0x102FAC +#define DMACNTLMODFREG_STARTDSP1 0x102FA0 +#define DMACNTLMODFREG_ENDDSP1 0x102FAC + +#define DMAGLOBSTATSREGDSP1 0x102FEC +#define DSP1XGPRAM_START 0x103000 +#define DSP1XGPRAM_END 0x1033FC +#define DSP1YGPRAM_START 0x103400 +#define DSP1YGPRAM_END 0x1037FC + + + +#define AUDIORINGIPDSP2_START 0x104000 +#define AUDIORINGIPDSP2_END 0x1043FC +#define AUDIORINGOPDSP2_START 0x104400 +#define AUDIORINGOPDSP2_END 0x1047FC +#define AUDPARARINGIODSP2_START 0x104800 +#define AUDPARARINGIODSP2_END 0x104BFC +#define DSP2LOCALHWREG_START 0x104C00 +#define DSP2LOCALHWREG_END 0x104C3C +#define DSP2XYRAMAGINDEX_START 0x104C40 +#define DSP2XYRAMAGINDEX_END 0x104C5C +#define DSP2XYRAMAGMDFR_START 0x104C60 +#define DSP2XYRAMAGMDFR_END 0x104C7C +#define DSP2INTCONTLVEC_START 0x104C80 +#define DSP2INTCONTLVEC_END 0x104CD8 +#define HOSTINTFPORTADDRCONTDSP2 0x104D40 +#define HOSTINTFPORTDATADSP2 0x104D44 +#define TIME0PERENBDSP2 0x104D60 +#define TIME0COUNTERDSP2 0x104D64 +#define TIME1PERENBDSP2 0x104D68 +#define TIME1COUNTERDSP2 0x104D6C +#define TIME2PERENBDSP2 0x104D70 +#define TIME2COUNTERDSP2 0x104D74 +#define TIME3PERENBDSP2 0x104D78 +#define TIME3COUNTERDSP2 0x104D7C +#define XRAMINDOPERREFNOUP_STARTDSP2 0x104D80 +#define XRAMINDOPERREFNOUP_ENDDSP2 0x104D9C +#define XRAMINDOPERREFUP_STARTDSP2 0x104DA0 +#define XRAMINDOPERREFUP_ENDDSP2 0x104DBC +#define YRAMINDOPERREFNOUP_STARTDSP2 0x104DC0 +#define YRAMINDOPERREFNOUP_ENDDSP2 0x104DDC +#define YRAMINDOPERREFUP_STARTDSP2 0x104DE0 +#define YRAMINDOPERREFUP_ENDDSP2 0x104DFC +#define DSP2CONDCODE 0x104E00 +#define DSP2STACKFLAG 0x104E04 +#define DSP2PROGCOUNTSTACKPTREG 0x104E08 +#define DSP2PROGCOUNTSTACKDATAREG 0x104E0C +#define DSP2CURLOOPADDRREG 0x104E10 +#define DSP2CURLOOPCOUNT 0x104E14 +#define DSP2TOPLOOPCOUNTSTACK 0x104E18 +#define DSP2TOPLOOPADDRSTACK 0x104E1C +#define DSP2LOOPSTACKPTR 0x104E20 +#define DSP2STASSTACKDATAREG 0x104E24 +#define DSP2STASSTACKPTR 0x104E28 +#define DSP2PROGCOUNT 0x104E2C +#define DSP2XYRAMBASE_START 0x104EA0 +#define DSP2XYRAMBASE_END 0x104EBC +#define DSP2XYRAMLENG_START 0x104EC0 +#define DSP2XYRAMLENG_END 0x104EDC +#define SEMAPHOREREGDSP2 0x104EE0 +#define DSP2INTCONTMASKREG 0x104EE4 +#define DSP2INTCONTPENDREG 0x104EE8 +#define DSP2INTCONTSERVINT 0x104EEC +#define GPIODSP2 0x104EFC +#define DMADSPBASEADDRREG_STARTDSP2 0x104F00 +#define DMADSPBASEADDRREG_ENDDSP2 0x104F1C +#define DMAHOSTBASEADDRREG_STARTDSP2 0x104F20 +#define DMAHOSTBASEADDRREG_ENDDSP2 0x104F3C +#define DMADSPCURADDRREG_STARTDSP2 0x104F40 +#define DMADSPCURADDRREG_ENDDSP2 0x104F5C +#define DMAHOSTCURADDRREG_STARTDSP2 0x104F60 +#define DMAHOSTCURADDRREG_ENDDSP2 0x104F7C +#define DMATANXCOUNTREG_STARTDSP2 0x104F80 +#define DMATANXCOUNTREG_ENDDSP2 0x104F9C +#define DMATIMEBUGREG_STARTDSP2 0x104FA0 +#define DMATIMEBUGREG_ENDDSP2 0x104FAC +#define DMACNTLMODFREG_STARTDSP2 0x104FA0 +#define DMACNTLMODFREG_ENDDSP2 0x104FAC + +#define DMAGLOBSTATSREGDSP2 0x104FEC +#define DSP2XGPRAM_START 0x105000 +#define DSP2XGPRAM_END 0x1051FC +#define DSP2YGPRAM_START 0x105800 +#define DSP2YGPRAM_END 0x1059FC + + + +#define AUDIORINGIPDSP3_START 0x106000 +#define AUDIORINGIPDSP3_END 0x1063FC +#define AUDIORINGOPDSP3_START 0x106400 +#define AUDIORINGOPDSP3_END 0x1067FC +#define AUDPARARINGIODSP3_START 0x106800 +#define AUDPARARINGIODSP3_END 0x106BFC +#define DSP3LOCALHWREG_START 0x106C00 +#define DSP3LOCALHWREG_END 0x106C3C +#define DSP3XYRAMAGINDEX_START 0x106C40 +#define DSP3XYRAMAGINDEX_END 0x106C5C +#define DSP3XYRAMAGMDFR_START 0x106C60 +#define DSP3XYRAMAGMDFR_END 0x106C7C +#define DSP3INTCONTLVEC_START 0x106C80 +#define DSP3INTCONTLVEC_END 0x106CD8 +#define HOSTINTFPORTADDRCONTDSP3 0x106D40 +#define HOSTINTFPORTDATADSP3 0x106D44 +#define TIME0PERENBDSP3 0x106D60 +#define TIME0COUNTERDSP3 0x106D64 +#define TIME1PERENBDSP3 0x106D68 +#define TIME1COUNTERDSP3 0x106D6C +#define TIME2PERENBDSP3 0x106D70 +#define TIME2COUNTERDSP3 0x106D74 +#define TIME3PERENBDSP3 0x106D78 +#define TIME3COUNTERDSP3 0x106D7C +#define XRAMINDOPERREFNOUP_STARTDSP3 0x106D80 +#define XRAMINDOPERREFNOUP_ENDDSP3 0x106D9C +#define XRAMINDOPERREFUP_STARTDSP3 0x106DA0 +#define XRAMINDOPERREFUP_ENDDSP3 0x106DBC +#define YRAMINDOPERREFNOUP_STARTDSP3 0x106DC0 +#define YRAMINDOPERREFNOUP_ENDDSP3 0x106DDC +#define YRAMINDOPERREFUP_STARTDSP3 0x106DE0 +#define YRAMINDOPERREFUP_ENDDSP3 0x100DFC + +#define DSP3CONDCODE 0x106E00 +#define DSP3STACKFLAG 0x106E04 +#define DSP3PROGCOUNTSTACKPTREG 0x106E08 +#define DSP3PROGCOUNTSTACKDATAREG 0x106E0C +#define DSP3CURLOOPADDRREG 0x106E10 +#define DSP3CURLOOPCOUNT 0x106E14 +#define DSP3TOPLOOPCOUNTSTACK 0x106E18 +#define DSP3TOPLOOPADDRSTACK 0x106E1C +#define DSP3LOOPSTACKPTR 0x106E20 +#define DSP3STASSTACKDATAREG 0x106E24 +#define DSP3STASSTACKPTR 0x106E28 +#define DSP3PROGCOUNT 0x106E2C +#define DSP3XYRAMBASE_START 0x106EA0 +#define DSP3XYRAMBASE_END 0x106EBC +#define DSP3XYRAMLENG_START 0x106EC0 +#define DSP3XYRAMLENG_END 0x106EDC +#define SEMAPHOREREGDSP3 0x106EE0 +#define DSP3INTCONTMASKREG 0x106EE4 +#define DSP3INTCONTPENDREG 0x106EE8 +#define DSP3INTCONTSERVINT 0x106EEC +#define GPIODSP3 0x106EFC +#define DMADSPBASEADDRREG_STARTDSP3 0x106F00 +#define DMADSPBASEADDRREG_ENDDSP3 0x106F1C +#define DMAHOSTBASEADDRREG_STARTDSP3 0x106F20 +#define DMAHOSTBASEADDRREG_ENDDSP3 0x106F3C +#define DMADSPCURADDRREG_STARTDSP3 0x106F40 +#define DMADSPCURADDRREG_ENDDSP3 0x106F5C +#define DMAHOSTCURADDRREG_STARTDSP3 0x106F60 +#define DMAHOSTCURADDRREG_ENDDSP3 0x106F7C +#define DMATANXCOUNTREG_STARTDSP3 0x106F80 +#define DMATANXCOUNTREG_ENDDSP3 0x106F9C +#define DMATIMEBUGREG_STARTDSP3 0x106FA0 +#define DMATIMEBUGREG_ENDDSP3 0x106FAC +#define DMACNTLMODFREG_STARTDSP3 0x106FA0 +#define DMACNTLMODFREG_ENDDSP3 0x106FAC + +#define DMAGLOBSTATSREGDSP3 0x106FEC +#define DSP3XGPRAM_START 0x107000 +#define DSP3XGPRAM_END 0x1071FC +#define DSP3YGPRAM_START 0x107800 +#define DSP3YGPRAM_END 0x1079FC + +/* end of DSP reg definitions */ + +#define DSPAIMAP_START 0x108000 +#define DSPAIMAP_END 0x1083FC +#define DSPPIMAP_START 0x108400 +#define DSPPIMAP_END 0x1087FC +#define DSPPOMAP_START 0x108800 +#define DSPPOMAP_END 0x108BFC +#define DSPPOCTL 0x108C00 +#define TKCTL_START 0x110000 +#define TKCTL_END 0x110FFC +#define TKCC_START 0x111000 +#define TKCC_END 0x111FFC +#define TKIMAP_START 0x112000 +#define TKIMAP_END 0x112FFC +#define TKDCTR16 0x113000 +#define TKPB16 0x113004 +#define TKBS16 0x113008 +#define TKDCTR32 0x11300C +#define TKPB32 0x113010 +#define TKBS32 0x113014 +#define ICDCTR16 0x113018 +#define ITBS16 0x11301C +#define ICDCTR32 0x113020 +#define ITBS32 0x113024 +#define ITSTART 0x113028 +#define TKSQ 0x11302C + +#define TKSCCTL_START 0x114000 +#define TKSCCTL_END 0x11403C +#define TKSCADR_START 0x114100 +#define TKSCADR_END 0x11413C +#define TKSCDATAX_START 0x114800 +#define TKSCDATAX_END 0x1149FC +#define TKPCDATAX_START 0x120000 +#define TKPCDATAX_END 0x12FFFC + +#define MALSA 0x130000 +#define MAPPHA 0x130004 +#define MAPPLA 0x130008 +#define MALSB 0x130010 +#define MAPPHB 0x130014 +#define MAPPLB 0x130018 + +#define TANSPORTMAPABREGS_START 0x130020 +#define TANSPORTMAPABREGS_END 0x13A2FC + +#define PTPAHX 0x13B000 +#define PTPALX 0x13B004 + +#define TANSPPAGETABLEPHYADDR015_START 0x13B008 +#define TANSPPAGETABLEPHYADDR015_END 0x13B07C +#define TRNQADRX_START 0x13B100 +#define TRNQADRX_END 0x13B13C +#define TRNQTIMX_START 0x13B200 +#define TRNQTIMX_END 0x13B23C +#define TRNQAPARMX_START 0x13B300 +#define TRNQAPARMX_END 0x13B33C + +#define TRNQCNT 0x13B400 +#define TRNCTL 0x13B404 +#define TRNIS 0x13B408 +#define TRNCURTS 0x13B40C + +#define AMOP_START 0x140000 +#define AMOPLO 0x140000 +#define AMOPHI 0x140004 +#define AMOP_END 0x147FFC +#define PMOP_START 0x148000 +#define PMOPLO 0x148000 +#define PMOPHI 0x148004 +#define PMOP_END 0x14FFFC +#define PCURR_START 0x150000 +#define PCURR_END 0x153FFC +#define PTRAG_START 0x154000 +#define PTRAG_END 0x157FFC +#define PSR_START 0x158000 +#define PSR_END 0x15BFFC + +#define PFSTAT4SEG_START 0x160000 +#define PFSTAT4SEG_END 0x160BFC +#define PFSTAT2SEG_START 0x160C00 +#define PFSTAT2SEG_END 0x1617FC +#define PFTARG4SEG_START 0x164000 +#define PFTARG4SEG_END 0x164BFC +#define PFTARG2SEG_START 0x164C00 +#define PFTARG2SEG_END 0x1657FC +#define PFSR4SEG_START 0x168000 +#define PFSR4SEG_END 0x168BFC +#define PFSR2SEG_START 0x168C00 +#define PFSR2SEG_END 0x1697FC +#define PCURRMS4SEG_START 0x16C000 +#define PCURRMS4SEG_END 0x16CCFC +#define PCURRMS2SEG_START 0x16CC00 +#define PCURRMS2SEG_END 0x16D7FC +#define PTARGMS4SEG_START 0x170000 +#define PTARGMS4SEG_END 0x172FFC +#define PTARGMS2SEG_START 0x173000 +#define PTARGMS2SEG_END 0x1747FC +#define PSRMS4SEG_START 0x170000 +#define PSRMS4SEG_END 0x172FFC +#define PSRMS2SEG_START 0x173000 +#define PSRMS2SEG_END 0x1747FC + +#define PRING_LO_START 0x190000 +#define PRING_LO_END 0x193FFC +#define PRING_HI_START 0x194000 +#define PRING_HI_END 0x197FFC +#define PRING_LO_HI_START 0x198000 +#define PRING_LO_HI 0x198000 +#define PRING_LO_HI_END 0x19BFFC + +#define PINTFIFO 0x1A0000 +#define SRCCTL 0x1B0000 +#define SRCCCR 0x1B0004 +#define SRCIMAP 0x1B0008 +#define SRCODDC 0x1B000C +#define SRCCA 0x1B0010 +#define SRCCF 0x1B0014 +#define SRCSA 0x1B0018 +#define SRCLA 0x1B001C +#define SRCCTLSWR 0x1B0020 + +/* SRC HERE */ +#define SRCALBA 0x1B002C +#define SRCMCTL 0x1B012C +#define SRCCERR 0x1B022C +#define SRCITB 0x1B032C +#define SRCIPM 0x1B082C +#define SRCIP 0x1B102C +#define SRCENBSTAT 0x1B202C +#define SRCENBLO 0x1B212C +#define SRCENBHI 0x1B222C +#define SRCENBS 0x1B232C +#define SRCENB 0x1B282C +#define SRCENB07 0x1B282C +#define SRCENBS07 0x1B302C + +#define SRCDN0Z 0x1B0030 +#define SRCDN0Z0 0x1B0030 +#define SRCDN0Z1 0x1B0034 +#define SRCDN0Z2 0x1B0038 +#define SRCDN0Z3 0x1B003C +#define SRCDN1Z 0x1B0040 +#define SRCDN1Z0 0x1B0040 +#define SRCDN1Z1 0x1B0044 +#define SRCDN1Z2 0x1B0048 +#define SRCDN1Z3 0x1B004C +#define SRCDN1Z4 0x1B0050 +#define SRCDN1Z5 0x1B0054 +#define SRCDN1Z6 0x1B0058 +#define SRCDN1Z7 0x1B005C +#define SRCUPZ 0x1B0060 +#define SRCUPZ0 0x1B0060 +#define SRCUPZ1 0x1B0064 +#define SRCUPZ2 0x1B0068 +#define SRCUPZ3 0x1B006C +#define SRCUPZ4 0x1B0070 +#define SRCUPZ5 0x1B0074 +#define SRCUPZ6 0x1B0078 +#define SRCUPZ7 0x1B007C +#define SRCCD0 0x1B0080 +#define SRCCD1 0x1B0084 +#define SRCCD2 0x1B0088 +#define SRCCD3 0x1B008C +#define SRCCD4 0x1B0090 +#define SRCCD5 0x1B0094 +#define SRCCD6 0x1B0098 +#define SRCCD7 0x1B009C +#define SRCCD8 0x1B00A0 +#define SRCCD9 0x1B00A4 +#define SRCCDA 0x1B00A8 +#define SRCCDB 0x1B00AC +#define SRCCDC 0x1B00B0 +#define SRCCDD 0x1B00B4 +#define SRCCDE 0x1B00B8 +#define SRCCDF 0x1B00BC +#define SRCCD10 0x1B00C0 +#define SRCCD11 0x1B00C4 +#define SRCCD12 0x1B00C8 +#define SRCCD13 0x1B00CC +#define SRCCD14 0x1B00D0 +#define SRCCD15 0x1B00D4 +#define SRCCD16 0x1B00D8 +#define SRCCD17 0x1B00DC +#define SRCCD18 0x1B00E0 +#define SRCCD19 0x1B00E4 +#define SRCCD1A 0x1B00E8 +#define SRCCD1B 0x1B00EC +#define SRCCD1C 0x1B00F0 +#define SRCCD1D 0x1B00F4 +#define SRCCD1E 0x1B00F8 +#define SRCCD1F 0x1B00FC + +#define SRCCONTRBLOCK_START 0x1B0100 +#define SRCCONTRBLOCK_END 0x1BFFFC +#define FILTOP_START 0x1C0000 +#define FILTOP_END 0x1C05FC +#define FILTIMAP_START 0x1C0800 +#define FILTIMAP_END 0x1C0DFC +#define FILTZ1_START 0x1C1000 +#define FILTZ1_END 0x1C15FC +#define FILTZ2_START 0x1C1800 +#define FILTZ2_END 0x1C1DFC +#define DAOIMAP_START 0x1C5000 +#define DAOIMAP 0x1C5000 +#define DAOIMAP_END 0x1C5124 + +#define AC97D 0x1C5400 +#define AC97A 0x1C5404 +#define AC97CTL 0x1C5408 +#define I2SCTL 0x1C5420 + +#define SPOS 0x1C5440 +#define SPOSA 0x1C5440 +#define SPOSB 0x1C5444 +#define SPOSC 0x1C5448 +#define SPOSD 0x1C544C + +#define SPISA 0x1C5450 +#define SPISB 0x1C5454 +#define SPISC 0x1C5458 +#define SPISD 0x1C545C + +#define SPFSCTL 0x1C5460 + +#define SPFS0 0x1C5468 +#define SPFS1 0x1C546C +#define SPFS2 0x1C5470 +#define SPFS3 0x1C5474 +#define SPFS4 0x1C5478 +#define SPFS5 0x1C547C + +#define SPOCTL 0x1C5480 +#define SPICTL 0x1C5484 +#define SPISTS 0x1C5488 +#define SPINTP 0x1C548C +#define SPINTE 0x1C5490 +#define SPUTCTLAB 0x1C5494 +#define SPUTCTLCD 0x1C5498 + +#define SRTSPA 0x1C54C0 +#define SRTSPB 0x1C54C4 +#define SRTSPC 0x1C54C8 +#define SRTSPD 0x1C54CC + +#define SRTSCTL 0x1C54D0 +#define SRTSCTLA 0x1C54D0 +#define SRTSCTLB 0x1C54D4 +#define SRTSCTLC 0x1C54D8 +#define SRTSCTLD 0x1C54DC + +#define SRTI2S 0x1C54E0 +#define SRTICTL 0x1C54F0 + +#define WC 0x1C6000 +#define TIMR 0x1C6004 +# define TIMR_IE (1<<15) +# define TIMR_IP (1<<14) + +#define GIP 0x1C6010 +#define GIE 0x1C6014 +#define DIE 0x1C6018 +#define DIC 0x1C601C +#define GPIO 0x1C6020 +#define GPIOCTL 0x1C6024 +#define GPIP 0x1C6028 +#define GPIE 0x1C602C +#define DSPINT0 0x1C6030 +#define DSPEIOC 0x1C6034 +#define MUADAT 0x1C6040 +#define MUACMD 0x1C6044 +#define MUASTAT 0x1C6044 +#define MUBDAT 0x1C6048 +#define MUBCMD 0x1C604C +#define MUBSTAT 0x1C604C +#define UARTCMA 0x1C6050 +#define UARTCMB 0x1C6054 +#define UARTIP 0x1C6058 +#define UARTIE 0x1C605C +#define PLLCTL 0x1C6060 +#define PLLDCD 0x1C6064 +#define GCTL 0x1C6070 +#define ID0 0x1C6080 +#define ID1 0x1C6084 +#define ID2 0x1C6088 +#define ID3 0x1C608C +#define SDRCTL 0x1C7000 + + +#define I2SA_L 0x0L +#define I2SA_R 0x1L +#define I2SB_L 0x8L +#define I2SB_R 0x9L +#define I2SC_L 0x10L +#define I2SC_R 0x11L +#define I2SD_L 0x18L +#define I2SD_R 0x19L + +#endif /* CT20K1REG_H */ + + diff --git a/sound/pci/ctxfi/ct20k2reg.h b/sound/pci/ctxfi/ct20k2reg.h new file mode 100644 index 0000000..2d07986 --- /dev/null +++ b/sound/pci/ctxfi/ct20k2reg.h @@ -0,0 +1,85 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + */ + +#ifndef _20K2REGISTERS_H_ +#define _20K2REGISTERS_H_ + + +/* Timer Registers */ +#define TIMER_TIMR 0x1B7004 +#define INTERRUPT_GIP 0x1B7010 +#define INTERRUPT_GIE 0x1B7014 + +/* I2C Registers */ +#define I2C_IF_ADDRESS 0x1B9000 +#define I2C_IF_WDATA 0x1B9004 +#define I2C_IF_RDATA 0x1B9008 +#define I2C_IF_STATUS 0x1B900C +#define I2C_IF_WLOCK 0x1B9010 + +/* Global Control Registers */ +#define GLOBAL_CNTL_GCTL 0x1B7090 + +/* PLL Registers */ +#define PLL_CTL 0x1B7080 +#define PLL_STAT 0x1B7084 +#define PLL_ENB 0x1B7088 + +/* SRC Registers */ +#define SRC_CTL 0x1A0000 /* 0x1A0000 + (256 * Chn) */ +#define SRC_CCR 0x1A0004 /* 0x1A0004 + (256 * Chn) */ +#define SRC_IMAP 0x1A0008 /* 0x1A0008 + (256 * Chn) */ +#define SRC_CA 0x1A0010 /* 0x1A0010 + (256 * Chn) */ +#define SRC_CF 0x1A0014 /* 0x1A0014 + (256 * Chn) */ +#define SRC_SA 0x1A0018 /* 0x1A0018 + (256 * Chn) */ +#define SRC_LA 0x1A001C /* 0x1A001C + (256 * Chn) */ +#define SRC_CTLSWR 0x1A0020 /* 0x1A0020 + (256 * Chn) */ +#define SRC_CD 0x1A0080 /* 0x1A0080 + (256 * Chn) + (4 * Regn) */ +#define SRC_MCTL 0x1A012C +#define SRC_IP 0x1A102C /* 0x1A102C + (256 * Regn) */ +#define SRC_ENB 0x1A282C /* 0x1A282C + (256 * Regn) */ +#define SRC_ENBSTAT 0x1A202C +#define SRC_ENBSA 0x1A232C +#define SRC_DN0Z 0x1A0030 +#define SRC_DN1Z 0x1A0040 +#define SRC_UPZ 0x1A0060 + +/* GPIO Registers */ +#define GPIO_DATA 0x1B7020 +#define GPIO_CTRL 0x1B7024 + +/* Virtual memory registers */ +#define VMEM_PTPAL 0x1C6300 /* 0x1C6300 + (16 * Chn) */ +#define VMEM_PTPAH 0x1C6304 /* 0x1C6304 + (16 * Chn) */ +#define VMEM_CTL 0x1C7000 + +/* Transport Registers */ +#define TRANSPORT_ENB 0x1B6000 +#define TRANSPORT_CTL 0x1B6004 +#define TRANSPORT_INT 0x1B6008 + +/* Audio IO */ +#define AUDIO_IO_AIM 0x1B5000 /* 0x1B5000 + (0x04 * Chn) */ +#define AUDIO_IO_TX_CTL 0x1B5400 /* 0x1B5400 + (0x40 * Chn) */ +#define AUDIO_IO_TX_CSTAT_L 0x1B5408 /* 0x1B5408 + (0x40 * Chn) */ +#define AUDIO_IO_TX_CSTAT_H 0x1B540C /* 0x1B540C + (0x40 * Chn) */ +#define AUDIO_IO_RX_CTL 0x1B5410 /* 0x1B5410 + (0x40 * Chn) */ +#define AUDIO_IO_RX_SRT_CTL 0x1B5420 /* 0x1B5420 + (0x40 * Chn) */ +#define AUDIO_IO_MCLK 0x1B5600 +#define AUDIO_IO_TX_BLRCLK 0x1B5604 +#define AUDIO_IO_RX_BLRCLK 0x1B5608 + +/* Mixer */ +#define MIXER_AMOPLO 0x130000 /* 0x130000 + (8 * Chn) [4095 : 0] */ +#define MIXER_AMOPHI 0x130004 /* 0x130004 + (8 * Chn) [4095 : 0] */ +#define MIXER_PRING_LO_HI 0x188000 /* 0x188000 + (4 * Chn) [4095 : 0] */ +#define MIXER_PMOPLO 0x138000 /* 0x138000 + (8 * Chn) [4095 : 0] */ +#define MIXER_PMOPHI 0x138004 /* 0x138004 + (8 * Chn) [4095 : 0] */ +#define MIXER_AR_ENABLE 0x19000C + +#endif diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c new file mode 100644 index 0000000..a1db51b --- /dev/null +++ b/sound/pci/ctxfi/ctamixer.c @@ -0,0 +1,488 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctamixer.c + * + * @Brief + * This file contains the implementation of the Audio Mixer + * resource management object. + * + * @Author Liu Chun + * @Date May 21 2008 + * + */ + +#include "ctamixer.h" +#include "cthardware.h" +#include + +#define AMIXER_RESOURCE_NUM 256 +#define SUM_RESOURCE_NUM 256 + +#define AMIXER_Y_IMMEDIATE 1 + +#define BLANK_SLOT 4094 + +static int amixer_master(struct rsc *rsc) +{ + rsc->conj = 0; + return rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0]; +} + +static int amixer_next_conj(struct rsc *rsc) +{ + rsc->conj++; + return container_of(rsc, struct amixer, rsc)->idx[rsc->conj]; +} + +static int amixer_index(const struct rsc *rsc) +{ + return container_of(rsc, struct amixer, rsc)->idx[rsc->conj]; +} + +static int amixer_output_slot(const struct rsc *rsc) +{ + return (amixer_index(rsc) << 4) + 0x4; +} + +static struct rsc_ops amixer_basic_rsc_ops = { + .master = amixer_master, + .next_conj = amixer_next_conj, + .index = amixer_index, + .output_slot = amixer_output_slot, +}; + +static int amixer_set_input(struct amixer *amixer, struct rsc *rsc) +{ + struct hw *hw; + + hw = amixer->rsc.hw; + hw->amixer_set_mode(amixer->rsc.ctrl_blk, AMIXER_Y_IMMEDIATE); + amixer->input = rsc; + if (NULL == rsc) + hw->amixer_set_x(amixer->rsc.ctrl_blk, BLANK_SLOT); + else + hw->amixer_set_x(amixer->rsc.ctrl_blk, + rsc->ops->output_slot(rsc)); + + return 0; +} + +/* y is a 14-bit immediate constant */ +static int amixer_set_y(struct amixer *amixer, unsigned int y) +{ + struct hw *hw; + + hw = amixer->rsc.hw; + hw->amixer_set_y(amixer->rsc.ctrl_blk, y); + + return 0; +} + +static int amixer_set_invalid_squash(struct amixer *amixer, unsigned int iv) +{ + struct hw *hw; + + hw = amixer->rsc.hw; + hw->amixer_set_iv(amixer->rsc.ctrl_blk, iv); + + return 0; +} + +static int amixer_set_sum(struct amixer *amixer, struct sum *sum) +{ + struct hw *hw; + + hw = amixer->rsc.hw; + amixer->sum = sum; + if (NULL == sum) { + hw->amixer_set_se(amixer->rsc.ctrl_blk, 0); + } else { + hw->amixer_set_se(amixer->rsc.ctrl_blk, 1); + hw->amixer_set_sadr(amixer->rsc.ctrl_blk, + sum->rsc.ops->index(&sum->rsc)); + } + + return 0; +} + +static int amixer_commit_write(struct amixer *amixer) +{ + struct hw *hw; + unsigned int index; + int i; + struct rsc *input; + struct sum *sum; + + hw = amixer->rsc.hw; + input = amixer->input; + sum = amixer->sum; + + /* Program master and conjugate resources */ + amixer->rsc.ops->master(&amixer->rsc); + if (NULL != input) + input->ops->master(input); + + if (NULL != sum) + sum->rsc.ops->master(&sum->rsc); + + for (i = 0; i < amixer->rsc.msr; i++) { + hw->amixer_set_dirty_all(amixer->rsc.ctrl_blk); + if (NULL != input) { + hw->amixer_set_x(amixer->rsc.ctrl_blk, + input->ops->output_slot(input)); + input->ops->next_conj(input); + } + if (NULL != sum) { + hw->amixer_set_sadr(amixer->rsc.ctrl_blk, + sum->rsc.ops->index(&sum->rsc)); + sum->rsc.ops->next_conj(&sum->rsc); + } + index = amixer->rsc.ops->output_slot(&amixer->rsc); + hw->amixer_commit_write(hw, index, amixer->rsc.ctrl_blk); + amixer->rsc.ops->next_conj(&amixer->rsc); + } + amixer->rsc.ops->master(&amixer->rsc); + if (NULL != input) + input->ops->master(input); + + if (NULL != sum) + sum->rsc.ops->master(&sum->rsc); + + return 0; +} + +static int amixer_commit_raw_write(struct amixer *amixer) +{ + struct hw *hw; + unsigned int index; + + hw = amixer->rsc.hw; + index = amixer->rsc.ops->output_slot(&amixer->rsc); + hw->amixer_commit_write(hw, index, amixer->rsc.ctrl_blk); + + return 0; +} + +static int amixer_get_y(struct amixer *amixer) +{ + struct hw *hw; + + hw = amixer->rsc.hw; + return hw->amixer_get_y(amixer->rsc.ctrl_blk); +} + +static int amixer_setup(struct amixer *amixer, struct rsc *input, + unsigned int scale, struct sum *sum) +{ + amixer_set_input(amixer, input); + amixer_set_y(amixer, scale); + amixer_set_sum(amixer, sum); + amixer_commit_write(amixer); + return 0; +} + +static struct amixer_rsc_ops amixer_ops = { + .set_input = amixer_set_input, + .set_invalid_squash = amixer_set_invalid_squash, + .set_scale = amixer_set_y, + .set_sum = amixer_set_sum, + .commit_write = amixer_commit_write, + .commit_raw_write = amixer_commit_raw_write, + .setup = amixer_setup, + .get_scale = amixer_get_y, +}; + +static int amixer_rsc_init(struct amixer *amixer, + const struct amixer_desc *desc, + struct amixer_mgr *mgr) +{ + int err; + + err = rsc_init(&amixer->rsc, amixer->idx[0], + AMIXER, desc->msr, mgr->mgr.hw); + if (err) + return err; + + /* Set amixer specific operations */ + amixer->rsc.ops = &amixer_basic_rsc_ops; + amixer->ops = &amixer_ops; + amixer->input = NULL; + amixer->sum = NULL; + + amixer_setup(amixer, NULL, 0, NULL); + + return 0; +} + +static int amixer_rsc_uninit(struct amixer *amixer) +{ + amixer_setup(amixer, NULL, 0, NULL); + rsc_uninit(&amixer->rsc); + amixer->ops = NULL; + amixer->input = NULL; + amixer->sum = NULL; + return 0; +} + +static int get_amixer_rsc(struct amixer_mgr *mgr, + const struct amixer_desc *desc, + struct amixer **ramixer) +{ + int err, i; + unsigned int idx; + struct amixer *amixer; + unsigned long flags; + + *ramixer = NULL; + + /* Allocate mem for amixer resource */ + amixer = kzalloc(sizeof(*amixer), GFP_KERNEL); + if (NULL == amixer) { + err = -ENOMEM; + return err; + } + + /* Check whether there are sufficient + * amixer resources to meet request. */ + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i = 0; i < desc->msr; i++) { + err = mgr_get_resource(&mgr->mgr, 1, &idx); + if (err) + break; + + amixer->idx[i] = idx; + } + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + if (err) { + printk(KERN_ERR "ctxfi: Can't meet AMIXER resource request!\n"); + goto error; + } + + err = amixer_rsc_init(amixer, desc, mgr); + if (err) + goto error; + + *ramixer = amixer; + + return 0; + +error: + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i--; i >= 0; i--) + mgr_put_resource(&mgr->mgr, 1, amixer->idx[i]); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + kfree(amixer); + return err; +} + +static int put_amixer_rsc(struct amixer_mgr *mgr, struct amixer *amixer) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i = 0; i < amixer->rsc.msr; i++) + mgr_put_resource(&mgr->mgr, 1, amixer->idx[i]); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + amixer_rsc_uninit(amixer); + kfree(amixer); + + return 0; +} + +int amixer_mgr_create(void *hw, struct amixer_mgr **ramixer_mgr) +{ + int err; + struct amixer_mgr *amixer_mgr; + + *ramixer_mgr = NULL; + amixer_mgr = kzalloc(sizeof(*amixer_mgr), GFP_KERNEL); + if (NULL == amixer_mgr) + return -ENOMEM; + + err = rsc_mgr_init(&amixer_mgr->mgr, AMIXER, AMIXER_RESOURCE_NUM, hw); + if (err) + goto error; + + spin_lock_init(&amixer_mgr->mgr_lock); + + amixer_mgr->get_amixer = get_amixer_rsc; + amixer_mgr->put_amixer = put_amixer_rsc; + + *ramixer_mgr = amixer_mgr; + + return 0; + +error: + kfree(amixer_mgr); + return err; +} + +int amixer_mgr_destroy(struct amixer_mgr *amixer_mgr) +{ + rsc_mgr_uninit(&amixer_mgr->mgr); + kfree(amixer_mgr); + return 0; +} + +/* SUM resource management */ + +static int sum_master(struct rsc *rsc) +{ + rsc->conj = 0; + return rsc->idx = container_of(rsc, struct sum, rsc)->idx[0]; +} + +static int sum_next_conj(struct rsc *rsc) +{ + rsc->conj++; + return container_of(rsc, struct sum, rsc)->idx[rsc->conj]; +} + +static int sum_index(const struct rsc *rsc) +{ + return container_of(rsc, struct sum, rsc)->idx[rsc->conj]; +} + +static int sum_output_slot(const struct rsc *rsc) +{ + return (sum_index(rsc) << 4) + 0xc; +} + +static struct rsc_ops sum_basic_rsc_ops = { + .master = sum_master, + .next_conj = sum_next_conj, + .index = sum_index, + .output_slot = sum_output_slot, +}; + +static int sum_rsc_init(struct sum *sum, + const struct sum_desc *desc, + struct sum_mgr *mgr) +{ + int err; + + err = rsc_init(&sum->rsc, sum->idx[0], SUM, desc->msr, mgr->mgr.hw); + if (err) + return err; + + sum->rsc.ops = &sum_basic_rsc_ops; + + return 0; +} + +static int sum_rsc_uninit(struct sum *sum) +{ + rsc_uninit(&sum->rsc); + return 0; +} + +static int get_sum_rsc(struct sum_mgr *mgr, + const struct sum_desc *desc, + struct sum **rsum) +{ + int err, i; + unsigned int idx; + struct sum *sum; + unsigned long flags; + + *rsum = NULL; + + /* Allocate mem for sum resource */ + sum = kzalloc(sizeof(*sum), GFP_KERNEL); + if (NULL == sum) { + err = -ENOMEM; + return err; + } + + /* Check whether there are sufficient sum resources to meet request. */ + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i = 0; i < desc->msr; i++) { + err = mgr_get_resource(&mgr->mgr, 1, &idx); + if (err) + break; + + sum->idx[i] = idx; + } + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + if (err) { + printk(KERN_ERR "ctxfi: Can't meet SUM resource request!\n"); + goto error; + } + + err = sum_rsc_init(sum, desc, mgr); + if (err) + goto error; + + *rsum = sum; + + return 0; + +error: + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i--; i >= 0; i--) + mgr_put_resource(&mgr->mgr, 1, sum->idx[i]); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + kfree(sum); + return err; +} + +static int put_sum_rsc(struct sum_mgr *mgr, struct sum *sum) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i = 0; i < sum->rsc.msr; i++) + mgr_put_resource(&mgr->mgr, 1, sum->idx[i]); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + sum_rsc_uninit(sum); + kfree(sum); + + return 0; +} + +int sum_mgr_create(void *hw, struct sum_mgr **rsum_mgr) +{ + int err; + struct sum_mgr *sum_mgr; + + *rsum_mgr = NULL; + sum_mgr = kzalloc(sizeof(*sum_mgr), GFP_KERNEL); + if (NULL == sum_mgr) + return -ENOMEM; + + err = rsc_mgr_init(&sum_mgr->mgr, SUM, SUM_RESOURCE_NUM, hw); + if (err) + goto error; + + spin_lock_init(&sum_mgr->mgr_lock); + + sum_mgr->get_sum = get_sum_rsc; + sum_mgr->put_sum = put_sum_rsc; + + *rsum_mgr = sum_mgr; + + return 0; + +error: + kfree(sum_mgr); + return err; +} + +int sum_mgr_destroy(struct sum_mgr *sum_mgr) +{ + rsc_mgr_uninit(&sum_mgr->mgr); + kfree(sum_mgr); + return 0; +} + diff --git a/sound/pci/ctxfi/ctamixer.h b/sound/pci/ctxfi/ctamixer.h new file mode 100644 index 0000000..cc49e5a --- /dev/null +++ b/sound/pci/ctxfi/ctamixer.h @@ -0,0 +1,96 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctamixer.h + * + * @Brief + * This file contains the definition of the Audio Mixer + * resource management object. + * + * @Author Liu Chun + * @Date May 21 2008 + * + */ + +#ifndef CTAMIXER_H +#define CTAMIXER_H + +#include "ctresource.h" +#include + +/* Define the descriptor of a summation node resource */ +struct sum { + struct rsc rsc; /* Basic resource info */ + unsigned char idx[8]; +}; + +/* Define sum resource request description info */ +struct sum_desc { + unsigned int msr; +}; + +struct sum_mgr { + struct rsc_mgr mgr; /* Basic resource manager info */ + spinlock_t mgr_lock; + + /* request one sum resource */ + int (*get_sum)(struct sum_mgr *mgr, + const struct sum_desc *desc, struct sum **rsum); + /* return one sum resource */ + int (*put_sum)(struct sum_mgr *mgr, struct sum *sum); +}; + +/* Constructor and destructor of daio resource manager */ +int sum_mgr_create(void *hw, struct sum_mgr **rsum_mgr); +int sum_mgr_destroy(struct sum_mgr *sum_mgr); + +/* Define the descriptor of a amixer resource */ +struct amixer_rsc_ops; + +struct amixer { + struct rsc rsc; /* Basic resource info */ + unsigned char idx[8]; + struct rsc *input; /* pointer to a resource acting as source */ + struct sum *sum; /* Put amixer output to this summation node */ + struct amixer_rsc_ops *ops; /* AMixer specific operations */ +}; + +struct amixer_rsc_ops { + int (*set_input)(struct amixer *amixer, struct rsc *rsc); + int (*set_scale)(struct amixer *amixer, unsigned int scale); + int (*set_invalid_squash)(struct amixer *amixer, unsigned int iv); + int (*set_sum)(struct amixer *amixer, struct sum *sum); + int (*commit_write)(struct amixer *amixer); + /* Only for interleaved recording */ + int (*commit_raw_write)(struct amixer *amixer); + int (*setup)(struct amixer *amixer, struct rsc *input, + unsigned int scale, struct sum *sum); + int (*get_scale)(struct amixer *amixer); +}; + +/* Define amixer resource request description info */ +struct amixer_desc { + unsigned int msr; +}; + +struct amixer_mgr { + struct rsc_mgr mgr; /* Basic resource manager info */ + spinlock_t mgr_lock; + + /* request one amixer resource */ + int (*get_amixer)(struct amixer_mgr *mgr, + const struct amixer_desc *desc, + struct amixer **ramixer); + /* return one amixer resource */ + int (*put_amixer)(struct amixer_mgr *mgr, struct amixer *amixer); +}; + +/* Constructor and destructor of amixer resource manager */ +int amixer_mgr_create(void *hw, struct amixer_mgr **ramixer_mgr); +int amixer_mgr_destroy(struct amixer_mgr *amixer_mgr); + +#endif /* CTAMIXER_H */ diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c new file mode 100644 index 0000000..80fb2ba --- /dev/null +++ b/sound/pci/ctxfi/ctatc.c @@ -0,0 +1,1619 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctatc.c + * + * @Brief + * This file contains the implementation of the device resource management + * object. + * + * @Author Liu Chun + * @Date Mar 28 2008 + */ + +#include "ctatc.h" +#include "ctpcm.h" +#include "ctmixer.h" +#include "cthardware.h" +#include "ctsrc.h" +#include "ctamixer.h" +#include "ctdaio.h" +#include "cttimer.h" +#include +#include +#include +#include + +#define MONO_SUM_SCALE 0x19a8 /* 2^(-0.5) in 14-bit floating format */ +#define DAIONUM 7 +#define MAX_MULTI_CHN 8 + +#define IEC958_DEFAULT_CON ((IEC958_AES0_NONAUDIO \ + | IEC958_AES0_CON_NOT_COPYRIGHT) \ + | ((IEC958_AES1_CON_MIXER \ + | IEC958_AES1_CON_ORIGINAL) << 8) \ + | (0x10 << 16) \ + | ((IEC958_AES3_CON_FS_48000) << 24)) + +static struct snd_pci_quirk __devinitdata subsys_20k1_list[] = { + SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0022, "SB055x", CTSB055X), + SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x002f, "SB055x", CTSB055X), + SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0029, "SB073x", CTSB073X), + SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0031, "SB073x", CTSB073X), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000, 0x6000, + "UAA", CTUAA), + SND_PCI_QUIRK_VENDOR(PCI_VENDOR_ID_CREATIVE, + "Unknown", CT20K1_UNKNOWN), + { } /* terminator */ +}; + +static struct snd_pci_quirk __devinitdata subsys_20k2_list[] = { + SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB0760, + "SB0760", CTSB0760), + SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08801, + "SB0880", CTSB0880), + SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08802, + "SB0880", CTSB0880), + SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08803, + "SB0880", CTSB0880), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000, + PCI_SUBDEVICE_ID_CREATIVE_HENDRIX, "HENDRIX", + CTHENDRIX), + { } /* terminator */ +}; + +static const char *ct_subsys_name[NUM_CTCARDS] = { + [CTSB055X] = "SB055x", + [CTSB073X] = "SB073x", + [CTSB0760] = "SB076x", + [CTUAA] = "UAA", + [CT20K1_UNKNOWN] = "Unknown", + [CTHENDRIX] = "Hendrix", + [CTSB0880] = "SB0880", +}; + +static struct { + int (*create)(struct ct_atc *atc, + enum CTALSADEVS device, const char *device_name); + int (*destroy)(void *alsa_dev); + const char *public_name; +} alsa_dev_funcs[NUM_CTALSADEVS] = { + [FRONT] = { .create = ct_alsa_pcm_create, + .destroy = NULL, + .public_name = "Front/WaveIn"}, + [SURROUND] = { .create = ct_alsa_pcm_create, + .destroy = NULL, + .public_name = "Surround"}, + [CLFE] = { .create = ct_alsa_pcm_create, + .destroy = NULL, + .public_name = "Center/LFE"}, + [SIDE] = { .create = ct_alsa_pcm_create, + .destroy = NULL, + .public_name = "Side"}, + [IEC958] = { .create = ct_alsa_pcm_create, + .destroy = NULL, + .public_name = "IEC958 Non-audio"}, + + [MIXER] = { .create = ct_alsa_mix_create, + .destroy = NULL, + .public_name = "Mixer"} +}; + +typedef int (*create_t)(void *, void **); +typedef int (*destroy_t)(void *); + +static struct { + int (*create)(void *hw, void **rmgr); + int (*destroy)(void *mgr); +} rsc_mgr_funcs[NUM_RSCTYP] = { + [SRC] = { .create = (create_t)src_mgr_create, + .destroy = (destroy_t)src_mgr_destroy }, + [SRCIMP] = { .create = (create_t)srcimp_mgr_create, + .destroy = (destroy_t)srcimp_mgr_destroy }, + [AMIXER] = { .create = (create_t)amixer_mgr_create, + .destroy = (destroy_t)amixer_mgr_destroy }, + [SUM] = { .create = (create_t)sum_mgr_create, + .destroy = (destroy_t)sum_mgr_destroy }, + [DAIO] = { .create = (create_t)daio_mgr_create, + .destroy = (destroy_t)daio_mgr_destroy } +}; + +static int +atc_pcm_release_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm); + +/* * + * Only mono and interleaved modes are supported now. + * Always allocates a contiguous channel block. + * */ + +static int ct_map_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct snd_pcm_runtime *runtime; + struct ct_vm *vm; + + if (NULL == apcm->substream) + return 0; + + runtime = apcm->substream->runtime; + vm = atc->vm; + + apcm->vm_block = vm->map(vm, apcm->substream, runtime->dma_bytes); + + if (NULL == apcm->vm_block) + return -ENOENT; + + return 0; +} + +static void ct_unmap_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct ct_vm *vm; + + if (NULL == apcm->vm_block) + return; + + vm = atc->vm; + + vm->unmap(vm, apcm->vm_block); + + apcm->vm_block = NULL; +} + +static unsigned long atc_get_ptp_phys(struct ct_atc *atc, int index) +{ + struct ct_vm *vm; + void *kvirt_addr; + unsigned long phys_addr; + + vm = atc->vm; + kvirt_addr = vm->get_ptp_virt(vm, index); + if (kvirt_addr == NULL) + phys_addr = (~0UL); + else + phys_addr = virt_to_phys(kvirt_addr); + + return phys_addr; +} + +static unsigned int convert_format(snd_pcm_format_t snd_format) +{ + switch (snd_format) { + case SNDRV_PCM_FORMAT_U8: + return SRC_SF_U8; + case SNDRV_PCM_FORMAT_S16_LE: + return SRC_SF_S16; + case SNDRV_PCM_FORMAT_S24_3LE: + return SRC_SF_S24; + case SNDRV_PCM_FORMAT_S32_LE: + return SRC_SF_S32; + case SNDRV_PCM_FORMAT_FLOAT_LE: + return SRC_SF_F32; + default: + printk(KERN_ERR "ctxfi: not recognized snd format is %d \n", + snd_format); + return SRC_SF_S16; + } +} + +static unsigned int +atc_get_pitch(unsigned int input_rate, unsigned int output_rate) +{ + unsigned int pitch; + int b; + + /* get pitch and convert to fixed-point 8.24 format. */ + pitch = (input_rate / output_rate) << 24; + input_rate %= output_rate; + input_rate /= 100; + output_rate /= 100; + for (b = 31; ((b >= 0) && !(input_rate >> b)); ) + b--; + + if (b >= 0) { + input_rate <<= (31 - b); + input_rate /= output_rate; + b = 24 - (31 - b); + if (b >= 0) + input_rate <<= b; + else + input_rate >>= -b; + + pitch |= input_rate; + } + + return pitch; +} + +static int select_rom(unsigned int pitch) +{ + if ((pitch > 0x00428f5c) && (pitch < 0x01b851ec)) { + /* 0.26 <= pitch <= 1.72 */ + return 1; + } else if ((0x01d66666 == pitch) || (0x01d66667 == pitch)) { + /* pitch == 1.8375 */ + return 2; + } else if (0x02000000 == pitch) { + /* pitch == 2 */ + return 3; + } else if ((pitch >= 0x0) && (pitch <= 0x08000000)) { + /* 0 <= pitch <= 8 */ + return 0; + } else { + return -ENOENT; + } +} + +static int atc_pcm_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src_mgr *src_mgr = atc->rsc_mgrs[SRC]; + struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER]; + struct src_desc desc = {0}; + struct amixer_desc mix_dsc = {0}; + struct src *src; + struct amixer *amixer; + int err; + int n_amixer = apcm->substream->runtime->channels, i = 0; + int device = apcm->substream->pcm->device; + unsigned int pitch; + unsigned long flags; + + if (NULL != apcm->src) { + /* Prepared pcm playback */ + return 0; + } + + /* first release old resources */ + atc->pcm_release_resources(atc, apcm); + + /* Get SRC resource */ + desc.multi = apcm->substream->runtime->channels; + desc.msr = atc->msr; + desc.mode = MEMRD; + err = src_mgr->get_src(src_mgr, &desc, (struct src **)&apcm->src); + if (err) + goto error1; + + pitch = atc_get_pitch(apcm->substream->runtime->rate, + (atc->rsr * atc->msr)); + src = apcm->src; + src->ops->set_pitch(src, pitch); + src->ops->set_rom(src, select_rom(pitch)); + src->ops->set_sf(src, convert_format(apcm->substream->runtime->format)); + src->ops->set_pm(src, (src->ops->next_interleave(src) != NULL)); + + /* Get AMIXER resource */ + n_amixer = (n_amixer < 2) ? 2 : n_amixer; + apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL); + if (NULL == apcm->amixers) { + err = -ENOMEM; + goto error1; + } + mix_dsc.msr = atc->msr; + for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) { + err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc, + (struct amixer **)&apcm->amixers[i]); + if (err) + goto error1; + + apcm->n_amixer++; + } + + /* Set up device virtual mem map */ + err = ct_map_audio_buffer(atc, apcm); + if (err < 0) + goto error1; + + /* Connect resources */ + src = apcm->src; + for (i = 0; i < n_amixer; i++) { + amixer = apcm->amixers[i]; + spin_lock_irqsave(&atc->atc_lock, flags); + amixer->ops->setup(amixer, &src->rsc, + INIT_VOL, atc->pcm[i+device*2]); + spin_unlock_irqrestore(&atc->atc_lock, flags); + src = src->ops->next_interleave(src); + if (NULL == src) + src = apcm->src; + } + + ct_timer_prepare(apcm->timer); + + return 0; + +error1: + atc_pcm_release_resources(atc, apcm); + return err; +} + +static int +atc_pcm_release_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src_mgr *src_mgr = atc->rsc_mgrs[SRC]; + struct srcimp_mgr *srcimp_mgr = atc->rsc_mgrs[SRCIMP]; + struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER]; + struct sum_mgr *sum_mgr = atc->rsc_mgrs[SUM]; + struct srcimp *srcimp; + int i; + + if (NULL != apcm->srcimps) { + for (i = 0; i < apcm->n_srcimp; i++) { + srcimp = apcm->srcimps[i]; + srcimp->ops->unmap(srcimp); + srcimp_mgr->put_srcimp(srcimp_mgr, srcimp); + apcm->srcimps[i] = NULL; + } + kfree(apcm->srcimps); + apcm->srcimps = NULL; + } + + if (NULL != apcm->srccs) { + for (i = 0; i < apcm->n_srcc; i++) { + src_mgr->put_src(src_mgr, apcm->srccs[i]); + apcm->srccs[i] = NULL; + } + kfree(apcm->srccs); + apcm->srccs = NULL; + } + + if (NULL != apcm->amixers) { + for (i = 0; i < apcm->n_amixer; i++) { + amixer_mgr->put_amixer(amixer_mgr, apcm->amixers[i]); + apcm->amixers[i] = NULL; + } + kfree(apcm->amixers); + apcm->amixers = NULL; + } + + if (NULL != apcm->mono) { + sum_mgr->put_sum(sum_mgr, apcm->mono); + apcm->mono = NULL; + } + + if (NULL != apcm->src) { + src_mgr->put_src(src_mgr, apcm->src); + apcm->src = NULL; + } + + if (NULL != apcm->vm_block) { + /* Undo device virtual mem map */ + ct_unmap_audio_buffer(atc, apcm); + apcm->vm_block = NULL; + } + + return 0; +} + +static int atc_pcm_playback_start(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + unsigned int max_cisz; + struct src *src = apcm->src; + + if (apcm->started) + return 0; + apcm->started = 1; + + max_cisz = src->multi * src->rsc.msr; + max_cisz = 0x80 * (max_cisz < 8 ? max_cisz : 8); + + src->ops->set_sa(src, apcm->vm_block->addr); + src->ops->set_la(src, apcm->vm_block->addr + apcm->vm_block->size); + src->ops->set_ca(src, apcm->vm_block->addr + max_cisz); + src->ops->set_cisz(src, max_cisz); + + src->ops->set_bm(src, 1); + src->ops->set_state(src, SRC_STATE_INIT); + src->ops->commit_write(src); + + ct_timer_start(apcm->timer); + return 0; +} + +static int atc_pcm_stop(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src *src; + int i; + + ct_timer_stop(apcm->timer); + + src = apcm->src; + src->ops->set_bm(src, 0); + src->ops->set_state(src, SRC_STATE_OFF); + src->ops->commit_write(src); + + if (NULL != apcm->srccs) { + for (i = 0; i < apcm->n_srcc; i++) { + src = apcm->srccs[i]; + src->ops->set_bm(src, 0); + src->ops->set_state(src, SRC_STATE_OFF); + src->ops->commit_write(src); + } + } + + apcm->started = 0; + + return 0; +} + +static int +atc_pcm_playback_position(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src *src = apcm->src; + u32 size, max_cisz; + int position; + + if (!src) + return 0; + position = src->ops->get_ca(src); + + size = apcm->vm_block->size; + max_cisz = src->multi * src->rsc.msr; + max_cisz = 128 * (max_cisz < 8 ? max_cisz : 8); + + return (position + size - max_cisz - apcm->vm_block->addr) % size; +} + +struct src_node_conf_t { + unsigned int pitch; + unsigned int msr:8; + unsigned int mix_msr:8; + unsigned int imp_msr:8; + unsigned int vo:1; +}; + +static void setup_src_node_conf(struct ct_atc *atc, struct ct_atc_pcm *apcm, + struct src_node_conf_t *conf, int *n_srcc) +{ + unsigned int pitch; + + /* get pitch and convert to fixed-point 8.24 format. */ + pitch = atc_get_pitch((atc->rsr * atc->msr), + apcm->substream->runtime->rate); + *n_srcc = 0; + + if (1 == atc->msr) { + *n_srcc = apcm->substream->runtime->channels; + conf[0].pitch = pitch; + conf[0].mix_msr = conf[0].imp_msr = conf[0].msr = 1; + conf[0].vo = 1; + } else if (2 == atc->msr) { + if (0x8000000 < pitch) { + /* Need two-stage SRCs, SRCIMPs and + * AMIXERs for converting format */ + conf[0].pitch = (atc->msr << 24); + conf[0].msr = conf[0].mix_msr = 1; + conf[0].imp_msr = atc->msr; + conf[0].vo = 0; + conf[1].pitch = atc_get_pitch(atc->rsr, + apcm->substream->runtime->rate); + conf[1].msr = conf[1].mix_msr = conf[1].imp_msr = 1; + conf[1].vo = 1; + *n_srcc = apcm->substream->runtime->channels * 2; + } else if (0x1000000 < pitch) { + /* Need one-stage SRCs, SRCIMPs and + * AMIXERs for converting format */ + conf[0].pitch = pitch; + conf[0].msr = conf[0].mix_msr + = conf[0].imp_msr = atc->msr; + conf[0].vo = 1; + *n_srcc = apcm->substream->runtime->channels; + } + } +} + +static int +atc_pcm_capture_get_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src_mgr *src_mgr = atc->rsc_mgrs[SRC]; + struct srcimp_mgr *srcimp_mgr = atc->rsc_mgrs[SRCIMP]; + struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER]; + struct sum_mgr *sum_mgr = atc->rsc_mgrs[SUM]; + struct src_desc src_dsc = {0}; + struct src *src; + struct srcimp_desc srcimp_dsc = {0}; + struct srcimp *srcimp; + struct amixer_desc mix_dsc = {0}; + struct sum_desc sum_dsc = {0}; + unsigned int pitch; + int multi, err, i; + int n_srcimp, n_amixer, n_srcc, n_sum; + struct src_node_conf_t src_node_conf[2] = {{0} }; + + /* first release old resources */ + atc_pcm_release_resources(atc, apcm); + + /* The numbers of converting SRCs and SRCIMPs should be determined + * by pitch value. */ + + multi = apcm->substream->runtime->channels; + + /* get pitch and convert to fixed-point 8.24 format. */ + pitch = atc_get_pitch((atc->rsr * atc->msr), + apcm->substream->runtime->rate); + + setup_src_node_conf(atc, apcm, src_node_conf, &n_srcc); + n_sum = (1 == multi) ? 1 : 0; + n_amixer = n_sum * 2 + n_srcc; + n_srcimp = n_srcc; + if ((multi > 1) && (0x8000000 >= pitch)) { + /* Need extra AMIXERs and SRCIMPs for special treatment + * of interleaved recording of conjugate channels */ + n_amixer += multi * atc->msr; + n_srcimp += multi * atc->msr; + } else { + n_srcimp += multi; + } + + if (n_srcc) { + apcm->srccs = kzalloc(sizeof(void *)*n_srcc, GFP_KERNEL); + if (NULL == apcm->srccs) + return -ENOMEM; + } + if (n_amixer) { + apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL); + if (NULL == apcm->amixers) { + err = -ENOMEM; + goto error1; + } + } + apcm->srcimps = kzalloc(sizeof(void *)*n_srcimp, GFP_KERNEL); + if (NULL == apcm->srcimps) { + err = -ENOMEM; + goto error1; + } + + /* Allocate SRCs for sample rate conversion if needed */ + src_dsc.multi = 1; + src_dsc.mode = ARCRW; + for (i = 0, apcm->n_srcc = 0; i < n_srcc; i++) { + src_dsc.msr = src_node_conf[i/multi].msr; + err = src_mgr->get_src(src_mgr, &src_dsc, + (struct src **)&apcm->srccs[i]); + if (err) + goto error1; + + src = apcm->srccs[i]; + pitch = src_node_conf[i/multi].pitch; + src->ops->set_pitch(src, pitch); + src->ops->set_rom(src, select_rom(pitch)); + src->ops->set_vo(src, src_node_conf[i/multi].vo); + + apcm->n_srcc++; + } + + /* Allocate AMIXERs for routing SRCs of conversion if needed */ + for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) { + if (i < (n_sum*2)) + mix_dsc.msr = atc->msr; + else if (i < (n_sum*2+n_srcc)) + mix_dsc.msr = src_node_conf[(i-n_sum*2)/multi].mix_msr; + else + mix_dsc.msr = 1; + + err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc, + (struct amixer **)&apcm->amixers[i]); + if (err) + goto error1; + + apcm->n_amixer++; + } + + /* Allocate a SUM resource to mix all input channels together */ + sum_dsc.msr = atc->msr; + err = sum_mgr->get_sum(sum_mgr, &sum_dsc, (struct sum **)&apcm->mono); + if (err) + goto error1; + + pitch = atc_get_pitch((atc->rsr * atc->msr), + apcm->substream->runtime->rate); + /* Allocate SRCIMP resources */ + for (i = 0, apcm->n_srcimp = 0; i < n_srcimp; i++) { + if (i < (n_srcc)) + srcimp_dsc.msr = src_node_conf[i/multi].imp_msr; + else if (1 == multi) + srcimp_dsc.msr = (pitch <= 0x8000000) ? atc->msr : 1; + else + srcimp_dsc.msr = 1; + + err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc, &srcimp); + if (err) + goto error1; + + apcm->srcimps[i] = srcimp; + apcm->n_srcimp++; + } + + /* Allocate a SRC for writing data to host memory */ + src_dsc.multi = apcm->substream->runtime->channels; + src_dsc.msr = 1; + src_dsc.mode = MEMWR; + err = src_mgr->get_src(src_mgr, &src_dsc, (struct src **)&apcm->src); + if (err) + goto error1; + + src = apcm->src; + src->ops->set_pitch(src, pitch); + + /* Set up device virtual mem map */ + err = ct_map_audio_buffer(atc, apcm); + if (err < 0) + goto error1; + + return 0; + +error1: + atc_pcm_release_resources(atc, apcm); + return err; +} + +static int atc_pcm_capture_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src *src; + struct amixer *amixer; + struct srcimp *srcimp; + struct ct_mixer *mixer = atc->mixer; + struct sum *mono; + struct rsc *out_ports[8] = {NULL}; + int err, i, j, n_sum, multi; + unsigned int pitch; + int mix_base = 0, imp_base = 0; + + if (NULL != apcm->src) { + /* Prepared pcm capture */ + return 0; + } + + /* Get needed resources. */ + err = atc_pcm_capture_get_resources(atc, apcm); + if (err) + return err; + + /* Connect resources */ + mixer->get_output_ports(mixer, MIX_PCMO_FRONT, + &out_ports[0], &out_ports[1]); + + multi = apcm->substream->runtime->channels; + if (1 == multi) { + mono = apcm->mono; + for (i = 0; i < 2; i++) { + amixer = apcm->amixers[i]; + amixer->ops->setup(amixer, out_ports[i], + MONO_SUM_SCALE, mono); + } + out_ports[0] = &mono->rsc; + n_sum = 1; + mix_base = n_sum * 2; + } + + for (i = 0; i < apcm->n_srcc; i++) { + src = apcm->srccs[i]; + srcimp = apcm->srcimps[imp_base+i]; + amixer = apcm->amixers[mix_base+i]; + srcimp->ops->map(srcimp, src, out_ports[i%multi]); + amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL); + out_ports[i%multi] = &amixer->rsc; + } + + pitch = atc_get_pitch((atc->rsr * atc->msr), + apcm->substream->runtime->rate); + + if ((multi > 1) && (pitch <= 0x8000000)) { + /* Special connection for interleaved + * recording with conjugate channels */ + for (i = 0; i < multi; i++) { + out_ports[i]->ops->master(out_ports[i]); + for (j = 0; j < atc->msr; j++) { + amixer = apcm->amixers[apcm->n_srcc+j*multi+i]; + amixer->ops->set_input(amixer, out_ports[i]); + amixer->ops->set_scale(amixer, INIT_VOL); + amixer->ops->set_sum(amixer, NULL); + amixer->ops->commit_raw_write(amixer); + out_ports[i]->ops->next_conj(out_ports[i]); + + srcimp = apcm->srcimps[apcm->n_srcc+j*multi+i]; + srcimp->ops->map(srcimp, apcm->src, + &amixer->rsc); + } + } + } else { + for (i = 0; i < multi; i++) { + srcimp = apcm->srcimps[apcm->n_srcc+i]; + srcimp->ops->map(srcimp, apcm->src, out_ports[i]); + } + } + + ct_timer_prepare(apcm->timer); + + return 0; +} + +static int atc_pcm_capture_start(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src *src; + struct src_mgr *src_mgr = atc->rsc_mgrs[SRC]; + int i, multi; + + if (apcm->started) + return 0; + + apcm->started = 1; + multi = apcm->substream->runtime->channels; + /* Set up converting SRCs */ + for (i = 0; i < apcm->n_srcc; i++) { + src = apcm->srccs[i]; + src->ops->set_pm(src, ((i%multi) != (multi-1))); + src_mgr->src_disable(src_mgr, src); + } + + /* Set up recording SRC */ + src = apcm->src; + src->ops->set_sf(src, convert_format(apcm->substream->runtime->format)); + src->ops->set_sa(src, apcm->vm_block->addr); + src->ops->set_la(src, apcm->vm_block->addr + apcm->vm_block->size); + src->ops->set_ca(src, apcm->vm_block->addr); + src_mgr->src_disable(src_mgr, src); + + /* Disable relevant SRCs firstly */ + src_mgr->commit_write(src_mgr); + + /* Enable SRCs respectively */ + for (i = 0; i < apcm->n_srcc; i++) { + src = apcm->srccs[i]; + src->ops->set_state(src, SRC_STATE_RUN); + src->ops->commit_write(src); + src_mgr->src_enable_s(src_mgr, src); + } + src = apcm->src; + src->ops->set_bm(src, 1); + src->ops->set_state(src, SRC_STATE_RUN); + src->ops->commit_write(src); + src_mgr->src_enable_s(src_mgr, src); + + /* Enable relevant SRCs synchronously */ + src_mgr->commit_write(src_mgr); + + ct_timer_start(apcm->timer); + return 0; +} + +static int +atc_pcm_capture_position(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src *src = apcm->src; + + if (!src) + return 0; + return src->ops->get_ca(src) - apcm->vm_block->addr; +} + +static int spdif_passthru_playback_get_resources(struct ct_atc *atc, + struct ct_atc_pcm *apcm) +{ + struct src_mgr *src_mgr = atc->rsc_mgrs[SRC]; + struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER]; + struct src_desc desc = {0}; + struct amixer_desc mix_dsc = {0}; + struct src *src; + int err; + int n_amixer = apcm->substream->runtime->channels, i; + unsigned int pitch, rsr = atc->pll_rate; + + /* first release old resources */ + atc_pcm_release_resources(atc, apcm); + + /* Get SRC resource */ + desc.multi = apcm->substream->runtime->channels; + desc.msr = 1; + while (apcm->substream->runtime->rate > (rsr * desc.msr)) + desc.msr <<= 1; + + desc.mode = MEMRD; + err = src_mgr->get_src(src_mgr, &desc, (struct src **)&apcm->src); + if (err) + goto error1; + + pitch = atc_get_pitch(apcm->substream->runtime->rate, (rsr * desc.msr)); + src = apcm->src; + src->ops->set_pitch(src, pitch); + src->ops->set_rom(src, select_rom(pitch)); + src->ops->set_sf(src, convert_format(apcm->substream->runtime->format)); + src->ops->set_pm(src, (src->ops->next_interleave(src) != NULL)); + src->ops->set_bp(src, 1); + + /* Get AMIXER resource */ + n_amixer = (n_amixer < 2) ? 2 : n_amixer; + apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL); + if (NULL == apcm->amixers) { + err = -ENOMEM; + goto error1; + } + mix_dsc.msr = desc.msr; + for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) { + err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc, + (struct amixer **)&apcm->amixers[i]); + if (err) + goto error1; + + apcm->n_amixer++; + } + + /* Set up device virtual mem map */ + err = ct_map_audio_buffer(atc, apcm); + if (err < 0) + goto error1; + + return 0; + +error1: + atc_pcm_release_resources(atc, apcm); + return err; +} + +static int atc_pll_init(struct ct_atc *atc, int rate) +{ + struct hw *hw = atc->hw; + int err; + err = hw->pll_init(hw, rate); + atc->pll_rate = err ? 0 : rate; + return err; +} + +static int +spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct dao *dao = container_of(atc->daios[SPDIFOO], struct dao, daio); + unsigned long flags; + unsigned int rate = apcm->substream->runtime->rate; + unsigned int status; + int err; + unsigned char iec958_con_fs; + + switch (rate) { + case 48000: + iec958_con_fs = IEC958_AES3_CON_FS_48000; + break; + case 44100: + iec958_con_fs = IEC958_AES3_CON_FS_44100; + break; + case 32000: + iec958_con_fs = IEC958_AES3_CON_FS_32000; + break; + default: + return -ENOENT; + } + + spin_lock_irqsave(&atc->atc_lock, flags); + dao->ops->get_spos(dao, &status); + if (((status >> 24) & IEC958_AES3_CON_FS) != iec958_con_fs) { + status &= ((~IEC958_AES3_CON_FS) << 24); + status |= (iec958_con_fs << 24); + dao->ops->set_spos(dao, status); + dao->ops->commit_write(dao); + } + if ((rate != atc->pll_rate) && (32000 != rate)) + err = atc_pll_init(atc, rate); + spin_unlock_irqrestore(&atc->atc_lock, flags); + + return err; +} + +static int +spdif_passthru_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm) +{ + struct src *src; + struct amixer *amixer; + struct dao *dao; + int err; + int i; + unsigned long flags; + + if (NULL != apcm->src) + return 0; + + /* Configure SPDIFOO and PLL to passthrough mode; + * determine pll_rate. */ + err = spdif_passthru_playback_setup(atc, apcm); + if (err) + return err; + + /* Get needed resources. */ + err = spdif_passthru_playback_get_resources(atc, apcm); + if (err) + return err; + + /* Connect resources */ + src = apcm->src; + for (i = 0; i < apcm->n_amixer; i++) { + amixer = apcm->amixers[i]; + amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL); + src = src->ops->next_interleave(src); + if (NULL == src) + src = apcm->src; + } + /* Connect to SPDIFOO */ + spin_lock_irqsave(&atc->atc_lock, flags); + dao = container_of(atc->daios[SPDIFOO], struct dao, daio); + amixer = apcm->amixers[0]; + dao->ops->set_left_input(dao, &amixer->rsc); + amixer = apcm->amixers[1]; + dao->ops->set_right_input(dao, &amixer->rsc); + spin_unlock_irqrestore(&atc->atc_lock, flags); + + ct_timer_prepare(apcm->timer); + + return 0; +} + +static int atc_select_line_in(struct ct_atc *atc) +{ + struct hw *hw = atc->hw; + struct ct_mixer *mixer = atc->mixer; + struct src *src; + + if (hw->is_adc_source_selected(hw, ADC_LINEIN)) + return 0; + + mixer->set_input_left(mixer, MIX_MIC_IN, NULL); + mixer->set_input_right(mixer, MIX_MIC_IN, NULL); + + hw->select_adc_source(hw, ADC_LINEIN); + + src = atc->srcs[2]; + mixer->set_input_left(mixer, MIX_LINE_IN, &src->rsc); + src = atc->srcs[3]; + mixer->set_input_right(mixer, MIX_LINE_IN, &src->rsc); + + return 0; +} + +static int atc_select_mic_in(struct ct_atc *atc) +{ + struct hw *hw = atc->hw; + struct ct_mixer *mixer = atc->mixer; + struct src *src; + + if (hw->is_adc_source_selected(hw, ADC_MICIN)) + return 0; + + mixer->set_input_left(mixer, MIX_LINE_IN, NULL); + mixer->set_input_right(mixer, MIX_LINE_IN, NULL); + + hw->select_adc_source(hw, ADC_MICIN); + + src = atc->srcs[2]; + mixer->set_input_left(mixer, MIX_MIC_IN, &src->rsc); + src = atc->srcs[3]; + mixer->set_input_right(mixer, MIX_MIC_IN, &src->rsc); + + return 0; +} + +static int atc_have_digit_io_switch(struct ct_atc *atc) +{ + struct hw *hw = atc->hw; + + return hw->have_digit_io_switch(hw); +} + +static int atc_select_digit_io(struct ct_atc *atc) +{ + struct hw *hw = atc->hw; + + if (hw->is_adc_source_selected(hw, ADC_NONE)) + return 0; + + hw->select_adc_source(hw, ADC_NONE); + + return 0; +} + +static int atc_daio_unmute(struct ct_atc *atc, unsigned char state, int type) +{ + struct daio_mgr *daio_mgr = atc->rsc_mgrs[DAIO]; + + if (state) + daio_mgr->daio_enable(daio_mgr, atc->daios[type]); + else + daio_mgr->daio_disable(daio_mgr, atc->daios[type]); + + daio_mgr->commit_write(daio_mgr); + + return 0; +} + +static int +atc_dao_get_status(struct ct_atc *atc, unsigned int *status, int type) +{ + struct dao *dao = container_of(atc->daios[type], struct dao, daio); + return dao->ops->get_spos(dao, status); +} + +static int +atc_dao_set_status(struct ct_atc *atc, unsigned int status, int type) +{ + struct dao *dao = container_of(atc->daios[type], struct dao, daio); + + dao->ops->set_spos(dao, status); + dao->ops->commit_write(dao); + return 0; +} + +static int atc_line_front_unmute(struct ct_atc *atc, unsigned char state) +{ + return atc_daio_unmute(atc, state, LINEO1); +} + +static int atc_line_surround_unmute(struct ct_atc *atc, unsigned char state) +{ + return atc_daio_unmute(atc, state, LINEO4); +} + +static int atc_line_clfe_unmute(struct ct_atc *atc, unsigned char state) +{ + return atc_daio_unmute(atc, state, LINEO3); +} + +static int atc_line_rear_unmute(struct ct_atc *atc, unsigned char state) +{ + return atc_daio_unmute(atc, state, LINEO2); +} + +static int atc_line_in_unmute(struct ct_atc *atc, unsigned char state) +{ + return atc_daio_unmute(atc, state, LINEIM); +} + +static int atc_spdif_out_unmute(struct ct_atc *atc, unsigned char state) +{ + return atc_daio_unmute(atc, state, SPDIFOO); +} + +static int atc_spdif_in_unmute(struct ct_atc *atc, unsigned char state) +{ + return atc_daio_unmute(atc, state, SPDIFIO); +} + +static int atc_spdif_out_get_status(struct ct_atc *atc, unsigned int *status) +{ + return atc_dao_get_status(atc, status, SPDIFOO); +} + +static int atc_spdif_out_set_status(struct ct_atc *atc, unsigned int status) +{ + return atc_dao_set_status(atc, status, SPDIFOO); +} + +static int atc_spdif_out_passthru(struct ct_atc *atc, unsigned char state) +{ + unsigned long flags; + struct dao_desc da_dsc = {0}; + struct dao *dao; + int err; + struct ct_mixer *mixer = atc->mixer; + struct rsc *rscs[2] = {NULL}; + unsigned int spos = 0; + + spin_lock_irqsave(&atc->atc_lock, flags); + dao = container_of(atc->daios[SPDIFOO], struct dao, daio); + da_dsc.msr = state ? 1 : atc->msr; + da_dsc.passthru = state ? 1 : 0; + err = dao->ops->reinit(dao, &da_dsc); + if (state) { + spos = IEC958_DEFAULT_CON; + } else { + mixer->get_output_ports(mixer, MIX_SPDIF_OUT, + &rscs[0], &rscs[1]); + dao->ops->set_left_input(dao, rscs[0]); + dao->ops->set_right_input(dao, rscs[1]); + /* Restore PLL to atc->rsr if needed. */ + if (atc->pll_rate != atc->rsr) + err = atc_pll_init(atc, atc->rsr); + } + dao->ops->set_spos(dao, spos); + dao->ops->commit_write(dao); + spin_unlock_irqrestore(&atc->atc_lock, flags); + + return err; +} + +static int ct_atc_destroy(struct ct_atc *atc) +{ + struct daio_mgr *daio_mgr; + struct dao *dao; + struct dai *dai; + struct daio *daio; + struct sum_mgr *sum_mgr; + struct src_mgr *src_mgr; + struct srcimp_mgr *srcimp_mgr; + struct srcimp *srcimp; + struct ct_mixer *mixer; + int i = 0; + + if (NULL == atc) + return 0; + + if (atc->timer) { + ct_timer_free(atc->timer); + atc->timer = NULL; + } + + /* Stop hardware and disable all interrupts */ + if (NULL != atc->hw) + ((struct hw *)atc->hw)->card_stop(atc->hw); + + /* Destroy internal mixer objects */ + if (NULL != atc->mixer) { + mixer = atc->mixer; + mixer->set_input_left(mixer, MIX_LINE_IN, NULL); + mixer->set_input_right(mixer, MIX_LINE_IN, NULL); + mixer->set_input_left(mixer, MIX_MIC_IN, NULL); + mixer->set_input_right(mixer, MIX_MIC_IN, NULL); + mixer->set_input_left(mixer, MIX_SPDIF_IN, NULL); + mixer->set_input_right(mixer, MIX_SPDIF_IN, NULL); + ct_mixer_destroy(atc->mixer); + } + + if (NULL != atc->daios) { + daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO]; + for (i = 0; i < atc->n_daio; i++) { + daio = atc->daios[i]; + if (daio->type < LINEIM) { + dao = container_of(daio, struct dao, daio); + dao->ops->clear_left_input(dao); + dao->ops->clear_right_input(dao); + } else { + dai = container_of(daio, struct dai, daio); + /* some thing to do for dai ... */ + } + daio_mgr->put_daio(daio_mgr, daio); + } + kfree(atc->daios); + } + + if (NULL != atc->pcm) { + sum_mgr = atc->rsc_mgrs[SUM]; + for (i = 0; i < atc->n_pcm; i++) + sum_mgr->put_sum(sum_mgr, atc->pcm[i]); + + kfree(atc->pcm); + } + + if (NULL != atc->srcs) { + src_mgr = atc->rsc_mgrs[SRC]; + for (i = 0; i < atc->n_src; i++) + src_mgr->put_src(src_mgr, atc->srcs[i]); + + kfree(atc->srcs); + } + + if (NULL != atc->srcimps) { + srcimp_mgr = atc->rsc_mgrs[SRCIMP]; + for (i = 0; i < atc->n_srcimp; i++) { + srcimp = atc->srcimps[i]; + srcimp->ops->unmap(srcimp); + srcimp_mgr->put_srcimp(srcimp_mgr, atc->srcimps[i]); + } + kfree(atc->srcimps); + } + + for (i = 0; i < NUM_RSCTYP; i++) { + if ((NULL != rsc_mgr_funcs[i].destroy) && + (NULL != atc->rsc_mgrs[i])) + rsc_mgr_funcs[i].destroy(atc->rsc_mgrs[i]); + + } + + if (NULL != atc->hw) + destroy_hw_obj((struct hw *)atc->hw); + + /* Destroy device virtual memory manager object */ + if (NULL != atc->vm) { + ct_vm_destroy(atc->vm); + atc->vm = NULL; + } + + kfree(atc); + + return 0; +} + +static int atc_dev_free(struct snd_device *dev) +{ + struct ct_atc *atc = dev->device_data; + return ct_atc_destroy(atc); +} + +static int __devinit atc_identify_card(struct ct_atc *atc) +{ + const struct snd_pci_quirk *p; + const struct snd_pci_quirk *list; + + switch (atc->chip_type) { + case ATC20K1: + atc->chip_name = "20K1"; + list = subsys_20k1_list; + break; + case ATC20K2: + atc->chip_name = "20K2"; + list = subsys_20k2_list; + break; + default: + return -ENOENT; + } + p = snd_pci_quirk_lookup(atc->pci, list); + if (!p) + return -ENOENT; + atc->model = p->value; + atc->model_name = ct_subsys_name[atc->model]; + snd_printd("ctxfi: chip %s model %s (%04x:%04x) is found\n", + atc->chip_name, atc->model_name, + atc->pci->subsystem_vendor, + atc->pci->subsystem_device); + return 0; +} + +int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc) +{ + enum CTALSADEVS i; + int err; + + alsa_dev_funcs[MIXER].public_name = atc->chip_name; + + for (i = 0; i < NUM_CTALSADEVS; i++) { + if (NULL == alsa_dev_funcs[i].create) + continue; + + err = alsa_dev_funcs[i].create(atc, i, + alsa_dev_funcs[i].public_name); + if (err) { + printk(KERN_ERR "ctxfi: " + "Creating alsa device %d failed!\n", i); + return err; + } + } + + return 0; +} + +static int __devinit atc_create_hw_devs(struct ct_atc *atc) +{ + struct hw *hw; + struct card_conf info = {0}; + int i, err; + + err = create_hw_obj(atc->pci, atc->chip_type, atc->model, &hw); + if (err) { + printk(KERN_ERR "Failed to create hw obj!!!\n"); + return err; + } + atc->hw = hw; + + /* Initialize card hardware. */ + info.rsr = atc->rsr; + info.msr = atc->msr; + info.vm_pgt_phys = atc_get_ptp_phys(atc, 0); + err = hw->card_init(hw, &info); + if (err < 0) + return err; + + for (i = 0; i < NUM_RSCTYP; i++) { + if (NULL == rsc_mgr_funcs[i].create) + continue; + + err = rsc_mgr_funcs[i].create(atc->hw, &atc->rsc_mgrs[i]); + if (err) { + printk(KERN_ERR "ctxfi: " + "Failed to create rsc_mgr %d!!!\n", i); + return err; + } + } + + return 0; +} + +static int __devinit atc_get_resources(struct ct_atc *atc) +{ + struct daio_desc da_desc = {0}; + struct daio_mgr *daio_mgr; + struct src_desc src_dsc = {0}; + struct src_mgr *src_mgr; + struct srcimp_desc srcimp_dsc = {0}; + struct srcimp_mgr *srcimp_mgr; + struct sum_desc sum_dsc = {0}; + struct sum_mgr *sum_mgr; + int err, i; + + atc->daios = kzalloc(sizeof(void *)*(DAIONUM), GFP_KERNEL); + if (NULL == atc->daios) + return -ENOMEM; + + atc->srcs = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL); + if (NULL == atc->srcs) + return -ENOMEM; + + atc->srcimps = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL); + if (NULL == atc->srcimps) + return -ENOMEM; + + atc->pcm = kzalloc(sizeof(void *)*(2*4), GFP_KERNEL); + if (NULL == atc->pcm) + return -ENOMEM; + + daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO]; + da_desc.msr = atc->msr; + for (i = 0, atc->n_daio = 0; i < DAIONUM-1; i++) { + da_desc.type = i; + err = daio_mgr->get_daio(daio_mgr, &da_desc, + (struct daio **)&atc->daios[i]); + if (err) { + printk(KERN_ERR "ctxfi: Failed to get DAIO " + "resource %d!!!\n", i); + return err; + } + atc->n_daio++; + } + if (atc->model == CTSB073X) + da_desc.type = SPDIFI1; + else + da_desc.type = SPDIFIO; + err = daio_mgr->get_daio(daio_mgr, &da_desc, + (struct daio **)&atc->daios[i]); + if (err) { + printk(KERN_ERR "ctxfi: Failed to get S/PDIF-in resource!!!\n"); + return err; + } + atc->n_daio++; + + src_mgr = atc->rsc_mgrs[SRC]; + src_dsc.multi = 1; + src_dsc.msr = atc->msr; + src_dsc.mode = ARCRW; + for (i = 0, atc->n_src = 0; i < (2*2); i++) { + err = src_mgr->get_src(src_mgr, &src_dsc, + (struct src **)&atc->srcs[i]); + if (err) + return err; + + atc->n_src++; + } + + srcimp_mgr = atc->rsc_mgrs[SRCIMP]; + srcimp_dsc.msr = 8; /* SRCIMPs for S/PDIFIn SRT */ + for (i = 0, atc->n_srcimp = 0; i < (2*1); i++) { + err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc, + (struct srcimp **)&atc->srcimps[i]); + if (err) + return err; + + atc->n_srcimp++; + } + srcimp_dsc.msr = 8; /* SRCIMPs for LINE/MICIn SRT */ + for (i = 0; i < (2*1); i++) { + err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc, + (struct srcimp **)&atc->srcimps[2*1+i]); + if (err) + return err; + + atc->n_srcimp++; + } + + sum_mgr = atc->rsc_mgrs[SUM]; + sum_dsc.msr = atc->msr; + for (i = 0, atc->n_pcm = 0; i < (2*4); i++) { + err = sum_mgr->get_sum(sum_mgr, &sum_dsc, + (struct sum **)&atc->pcm[i]); + if (err) + return err; + + atc->n_pcm++; + } + + err = ct_mixer_create(atc, (struct ct_mixer **)&atc->mixer); + if (err) { + printk(KERN_ERR "ctxfi: Failed to create mixer obj!!!\n"); + return err; + } + + return 0; +} + +static void __devinit +atc_connect_dai(struct src_mgr *src_mgr, struct dai *dai, + struct src **srcs, struct srcimp **srcimps) +{ + struct rsc *rscs[2] = {NULL}; + struct src *src; + struct srcimp *srcimp; + int i = 0; + + rscs[0] = &dai->daio.rscl; + rscs[1] = &dai->daio.rscr; + for (i = 0; i < 2; i++) { + src = srcs[i]; + srcimp = srcimps[i]; + srcimp->ops->map(srcimp, src, rscs[i]); + src_mgr->src_disable(src_mgr, src); + } + + src_mgr->commit_write(src_mgr); /* Actually disable SRCs */ + + src = srcs[0]; + src->ops->set_pm(src, 1); + for (i = 0; i < 2; i++) { + src = srcs[i]; + src->ops->set_state(src, SRC_STATE_RUN); + src->ops->commit_write(src); + src_mgr->src_enable_s(src_mgr, src); + } + + dai->ops->set_srt_srcl(dai, &(srcs[0]->rsc)); + dai->ops->set_srt_srcr(dai, &(srcs[1]->rsc)); + + dai->ops->set_enb_src(dai, 1); + dai->ops->set_enb_srt(dai, 1); + dai->ops->commit_write(dai); + + src_mgr->commit_write(src_mgr); /* Synchronously enable SRCs */ +} + +static void __devinit atc_connect_resources(struct ct_atc *atc) +{ + struct dai *dai; + struct dao *dao; + struct src *src; + struct sum *sum; + struct ct_mixer *mixer; + struct rsc *rscs[2] = {NULL}; + int i, j; + + mixer = atc->mixer; + + for (i = MIX_WAVE_FRONT, j = LINEO1; i <= MIX_SPDIF_OUT; i++, j++) { + mixer->get_output_ports(mixer, i, &rscs[0], &rscs[1]); + dao = container_of(atc->daios[j], struct dao, daio); + dao->ops->set_left_input(dao, rscs[0]); + dao->ops->set_right_input(dao, rscs[1]); + } + + dai = container_of(atc->daios[LINEIM], struct dai, daio); + atc_connect_dai(atc->rsc_mgrs[SRC], dai, + (struct src **)&atc->srcs[2], + (struct srcimp **)&atc->srcimps[2]); + src = atc->srcs[2]; + mixer->set_input_left(mixer, MIX_LINE_IN, &src->rsc); + src = atc->srcs[3]; + mixer->set_input_right(mixer, MIX_LINE_IN, &src->rsc); + + dai = container_of(atc->daios[SPDIFIO], struct dai, daio); + atc_connect_dai(atc->rsc_mgrs[SRC], dai, + (struct src **)&atc->srcs[0], + (struct srcimp **)&atc->srcimps[0]); + + src = atc->srcs[0]; + mixer->set_input_left(mixer, MIX_SPDIF_IN, &src->rsc); + src = atc->srcs[1]; + mixer->set_input_right(mixer, MIX_SPDIF_IN, &src->rsc); + + for (i = MIX_PCMI_FRONT, j = 0; i <= MIX_PCMI_SURROUND; i++, j += 2) { + sum = atc->pcm[j]; + mixer->set_input_left(mixer, i, &sum->rsc); + sum = atc->pcm[j+1]; + mixer->set_input_right(mixer, i, &sum->rsc); + } +} + +static struct ct_atc atc_preset __devinitdata = { + .map_audio_buffer = ct_map_audio_buffer, + .unmap_audio_buffer = ct_unmap_audio_buffer, + .pcm_playback_prepare = atc_pcm_playback_prepare, + .pcm_release_resources = atc_pcm_release_resources, + .pcm_playback_start = atc_pcm_playback_start, + .pcm_playback_stop = atc_pcm_stop, + .pcm_playback_position = atc_pcm_playback_position, + .pcm_capture_prepare = atc_pcm_capture_prepare, + .pcm_capture_start = atc_pcm_capture_start, + .pcm_capture_stop = atc_pcm_stop, + .pcm_capture_position = atc_pcm_capture_position, + .spdif_passthru_playback_prepare = spdif_passthru_playback_prepare, + .get_ptp_phys = atc_get_ptp_phys, + .select_line_in = atc_select_line_in, + .select_mic_in = atc_select_mic_in, + .select_digit_io = atc_select_digit_io, + .line_front_unmute = atc_line_front_unmute, + .line_surround_unmute = atc_line_surround_unmute, + .line_clfe_unmute = atc_line_clfe_unmute, + .line_rear_unmute = atc_line_rear_unmute, + .line_in_unmute = atc_line_in_unmute, + .spdif_out_unmute = atc_spdif_out_unmute, + .spdif_in_unmute = atc_spdif_in_unmute, + .spdif_out_get_status = atc_spdif_out_get_status, + .spdif_out_set_status = atc_spdif_out_set_status, + .spdif_out_passthru = atc_spdif_out_passthru, + .have_digit_io_switch = atc_have_digit_io_switch, +}; + +/** + * ct_atc_create - create and initialize a hardware manager + * @card: corresponding alsa card object + * @pci: corresponding kernel pci device object + * @ratc: return created object address in it + * + * Creates and initializes a hardware manager. + * + * Creates kmallocated ct_atc structure. Initializes hardware. + * Returns 0 if suceeds, or negative error code if fails. + */ + +int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci, + unsigned int rsr, unsigned int msr, + int chip_type, struct ct_atc **ratc) +{ + struct ct_atc *atc; + static struct snd_device_ops ops = { + .dev_free = atc_dev_free, + }; + int err; + + *ratc = NULL; + + atc = kzalloc(sizeof(*atc), GFP_KERNEL); + if (NULL == atc) + return -ENOMEM; + + /* Set operations */ + *atc = atc_preset; + + atc->card = card; + atc->pci = pci; + atc->rsr = rsr; + atc->msr = msr; + atc->chip_type = chip_type; + + spin_lock_init(&atc->atc_lock); + + /* Find card model */ + err = atc_identify_card(atc); + if (err < 0) { + printk(KERN_ERR "ctatc: Card not recognised\n"); + goto error1; + } + + /* Set up device virtual memory management object */ + err = ct_vm_create(&atc->vm); + if (err < 0) + goto error1; + + /* Create all atc hw devices */ + err = atc_create_hw_devs(atc); + if (err < 0) + goto error1; + + /* Get resources */ + err = atc_get_resources(atc); + if (err < 0) + goto error1; + + /* Build topology */ + atc_connect_resources(atc); + + atc->timer = ct_timer_new(atc); + if (!atc->timer) + goto error1; + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, atc, &ops); + if (err < 0) + goto error1; + + snd_card_set_dev(card, &pci->dev); + + *ratc = atc; + return 0; + +error1: + ct_atc_destroy(atc); + printk(KERN_ERR "ctxfi: Something wrong!!!\n"); + return err; +} diff --git a/sound/pci/ctxfi/ctatc.h b/sound/pci/ctxfi/ctatc.h new file mode 100644 index 0000000..a033472 --- /dev/null +++ b/sound/pci/ctxfi/ctatc.h @@ -0,0 +1,147 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctatc.h + * + * @Brief + * This file contains the definition of the device resource management object. + * + * @Author Liu Chun + * @Date Mar 28 2008 + * + */ + +#ifndef CTATC_H +#define CTATC_H + +#include +#include +#include +#include +#include + +#include "ctvmem.h" +#include "ctresource.h" + +enum CTALSADEVS { /* Types of alsa devices */ + FRONT, + SURROUND, + CLFE, + SIDE, + IEC958, + MIXER, + NUM_CTALSADEVS /* This should always be the last */ +}; + +struct ct_atc_chip_sub_details { + u16 subsys; + const char *nm_model; +}; + +struct ct_atc_chip_details { + u16 vendor; + u16 device; + const struct ct_atc_chip_sub_details *sub_details; + const char *nm_card; +}; + +struct ct_atc; +struct ct_timer; +struct ct_timer_instance; + +/* alsa pcm stream descriptor */ +struct ct_atc_pcm { + struct snd_pcm_substream *substream; + void (*interrupt)(struct ct_atc_pcm *apcm); + struct ct_timer_instance *timer; + unsigned int started:1; + + /* Only mono and interleaved modes are supported now. */ + struct ct_vm_block *vm_block; + void *src; /* SRC for interacting with host memory */ + void **srccs; /* SRCs for sample rate conversion */ + void **srcimps; /* SRC Input Mappers */ + void **amixers; /* AMIXERs for routing converted data */ + void *mono; /* A SUM resource for mixing chs to one */ + unsigned char n_srcc; /* Number of converting SRCs */ + unsigned char n_srcimp; /* Number of SRC Input Mappers */ + unsigned char n_amixer; /* Number of AMIXERs */ +}; + +/* Chip resource management object */ +struct ct_atc { + struct pci_dev *pci; + struct snd_card *card; + unsigned int rsr; /* reference sample rate in Hz */ + unsigned int msr; /* master sample rate in rsr */ + unsigned int pll_rate; /* current rate of Phase Lock Loop */ + + int chip_type; + int model; + const char *chip_name; + const char *model_name; + + struct ct_vm *vm; /* device virtual memory manager for this card */ + int (*map_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm); + void (*unmap_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm); + unsigned long (*get_ptp_phys)(struct ct_atc *atc, int index); + + spinlock_t atc_lock; + + int (*pcm_playback_prepare)(struct ct_atc *atc, + struct ct_atc_pcm *apcm); + int (*pcm_playback_start)(struct ct_atc *atc, struct ct_atc_pcm *apcm); + int (*pcm_playback_stop)(struct ct_atc *atc, struct ct_atc_pcm *apcm); + int (*pcm_playback_position)(struct ct_atc *atc, + struct ct_atc_pcm *apcm); + int (*spdif_passthru_playback_prepare)(struct ct_atc *atc, + struct ct_atc_pcm *apcm); + int (*pcm_capture_prepare)(struct ct_atc *atc, struct ct_atc_pcm *apcm); + int (*pcm_capture_start)(struct ct_atc *atc, struct ct_atc_pcm *apcm); + int (*pcm_capture_stop)(struct ct_atc *atc, struct ct_atc_pcm *apcm); + int (*pcm_capture_position)(struct ct_atc *atc, + struct ct_atc_pcm *apcm); + int (*pcm_release_resources)(struct ct_atc *atc, + struct ct_atc_pcm *apcm); + int (*select_line_in)(struct ct_atc *atc); + int (*select_mic_in)(struct ct_atc *atc); + int (*select_digit_io)(struct ct_atc *atc); + int (*line_front_unmute)(struct ct_atc *atc, unsigned char state); + int (*line_surround_unmute)(struct ct_atc *atc, unsigned char state); + int (*line_clfe_unmute)(struct ct_atc *atc, unsigned char state); + int (*line_rear_unmute)(struct ct_atc *atc, unsigned char state); + int (*line_in_unmute)(struct ct_atc *atc, unsigned char state); + int (*spdif_out_unmute)(struct ct_atc *atc, unsigned char state); + int (*spdif_in_unmute)(struct ct_atc *atc, unsigned char state); + int (*spdif_out_get_status)(struct ct_atc *atc, unsigned int *status); + int (*spdif_out_set_status)(struct ct_atc *atc, unsigned int status); + int (*spdif_out_passthru)(struct ct_atc *atc, unsigned char state); + int (*have_digit_io_switch)(struct ct_atc *atc); + + /* Don't touch! Used for internal object. */ + void *rsc_mgrs[NUM_RSCTYP]; /* chip resource managers */ + void *mixer; /* internal mixer object */ + void *hw; /* chip specific hardware access object */ + void **daios; /* digital audio io resources */ + void **pcm; /* SUMs for collecting all pcm stream */ + void **srcs; /* Sample Rate Converters for input signal */ + void **srcimps; /* input mappers for SRCs */ + unsigned char n_daio; + unsigned char n_src; + unsigned char n_srcimp; + unsigned char n_pcm; + + struct ct_timer *timer; +}; + + +int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci, + unsigned int rsr, unsigned int msr, int chip_type, + struct ct_atc **ratc); +int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc); + +#endif /* CTATC_H */ diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c new file mode 100644 index 0000000..082e35c --- /dev/null +++ b/sound/pci/ctxfi/ctdaio.c @@ -0,0 +1,769 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctdaio.c + * + * @Brief + * This file contains the implementation of Digital Audio Input Output + * resource management object. + * + * @Author Liu Chun + * @Date May 23 2008 + * + */ + +#include "ctdaio.h" +#include "cthardware.h" +#include "ctimap.h" +#include +#include + +#define DAIO_RESOURCE_NUM NUM_DAIOTYP +#define DAIO_OUT_MAX SPDIFOO + +union daio_usage { + struct { + unsigned short lineo1:1; + unsigned short lineo2:1; + unsigned short lineo3:1; + unsigned short lineo4:1; + unsigned short spdifoo:1; + unsigned short lineim:1; + unsigned short spdifio:1; + unsigned short spdifi1:1; + } bf; + unsigned short data; +}; + +struct daio_rsc_idx { + unsigned short left; + unsigned short right; +}; + +struct daio_rsc_idx idx_20k1[NUM_DAIOTYP] = { + [LINEO1] = {.left = 0x00, .right = 0x01}, + [LINEO2] = {.left = 0x18, .right = 0x19}, + [LINEO3] = {.left = 0x08, .right = 0x09}, + [LINEO4] = {.left = 0x10, .right = 0x11}, + [LINEIM] = {.left = 0x1b5, .right = 0x1bd}, + [SPDIFOO] = {.left = 0x20, .right = 0x21}, + [SPDIFIO] = {.left = 0x15, .right = 0x1d}, + [SPDIFI1] = {.left = 0x95, .right = 0x9d}, +}; + +struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = { + [LINEO1] = {.left = 0x40, .right = 0x41}, + [LINEO2] = {.left = 0x70, .right = 0x71}, + [LINEO3] = {.left = 0x50, .right = 0x51}, + [LINEO4] = {.left = 0x60, .right = 0x61}, + [LINEIM] = {.left = 0x45, .right = 0xc5}, + [SPDIFOO] = {.left = 0x00, .right = 0x01}, + [SPDIFIO] = {.left = 0x05, .right = 0x85}, +}; + +static int daio_master(struct rsc *rsc) +{ + /* Actually, this is not the resource index of DAIO. + * For DAO, it is the input mapper index. And, for DAI, + * it is the output time-slot index. */ + return rsc->conj = rsc->idx; +} + +static int daio_index(const struct rsc *rsc) +{ + return rsc->conj; +} + +static int daio_out_next_conj(struct rsc *rsc) +{ + return rsc->conj += 2; +} + +static int daio_in_next_conj_20k1(struct rsc *rsc) +{ + return rsc->conj += 0x200; +} + +static int daio_in_next_conj_20k2(struct rsc *rsc) +{ + return rsc->conj += 0x100; +} + +static struct rsc_ops daio_out_rsc_ops = { + .master = daio_master, + .next_conj = daio_out_next_conj, + .index = daio_index, + .output_slot = NULL, +}; + +static struct rsc_ops daio_in_rsc_ops_20k1 = { + .master = daio_master, + .next_conj = daio_in_next_conj_20k1, + .index = NULL, + .output_slot = daio_index, +}; + +static struct rsc_ops daio_in_rsc_ops_20k2 = { + .master = daio_master, + .next_conj = daio_in_next_conj_20k2, + .index = NULL, + .output_slot = daio_index, +}; + +static unsigned int daio_device_index(enum DAIOTYP type, struct hw *hw) +{ + switch (hw->chip_type) { + case ATC20K1: + switch (type) { + case SPDIFOO: return 0; + case SPDIFIO: return 0; + case SPDIFI1: return 1; + case LINEO1: return 4; + case LINEO2: return 7; + case LINEO3: return 5; + case LINEO4: return 6; + case LINEIM: return 7; + default: return -EINVAL; + } + case ATC20K2: + switch (type) { + case SPDIFOO: return 0; + case SPDIFIO: return 0; + case LINEO1: return 4; + case LINEO2: return 7; + case LINEO3: return 5; + case LINEO4: return 6; + case LINEIM: return 4; + default: return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int dao_rsc_reinit(struct dao *dao, const struct dao_desc *desc); + +static int dao_spdif_get_spos(struct dao *dao, unsigned int *spos) +{ + ((struct hw *)dao->hw)->dao_get_spos(dao->ctrl_blk, spos); + return 0; +} + +static int dao_spdif_set_spos(struct dao *dao, unsigned int spos) +{ + ((struct hw *)dao->hw)->dao_set_spos(dao->ctrl_blk, spos); + return 0; +} + +static int dao_commit_write(struct dao *dao) +{ + ((struct hw *)dao->hw)->dao_commit_write(dao->hw, + daio_device_index(dao->daio.type, dao->hw), dao->ctrl_blk); + return 0; +} + +static int dao_set_left_input(struct dao *dao, struct rsc *input) +{ + struct imapper *entry; + struct daio *daio = &dao->daio; + int i; + + entry = kzalloc((sizeof(*entry) * daio->rscl.msr), GFP_KERNEL); + if (NULL == entry) + return -ENOMEM; + + /* Program master and conjugate resources */ + input->ops->master(input); + daio->rscl.ops->master(&daio->rscl); + for (i = 0; i < daio->rscl.msr; i++, entry++) { + entry->slot = input->ops->output_slot(input); + entry->user = entry->addr = daio->rscl.ops->index(&daio->rscl); + dao->mgr->imap_add(dao->mgr, entry); + dao->imappers[i] = entry; + + input->ops->next_conj(input); + daio->rscl.ops->next_conj(&daio->rscl); + } + input->ops->master(input); + daio->rscl.ops->master(&daio->rscl); + + return 0; +} + +static int dao_set_right_input(struct dao *dao, struct rsc *input) +{ + struct imapper *entry; + struct daio *daio = &dao->daio; + int i; + + entry = kzalloc((sizeof(*entry) * daio->rscr.msr), GFP_KERNEL); + if (NULL == entry) + return -ENOMEM; + + /* Program master and conjugate resources */ + input->ops->master(input); + daio->rscr.ops->master(&daio->rscr); + for (i = 0; i < daio->rscr.msr; i++, entry++) { + entry->slot = input->ops->output_slot(input); + entry->user = entry->addr = daio->rscr.ops->index(&daio->rscr); + dao->mgr->imap_add(dao->mgr, entry); + dao->imappers[daio->rscl.msr + i] = entry; + + input->ops->next_conj(input); + daio->rscr.ops->next_conj(&daio->rscr); + } + input->ops->master(input); + daio->rscr.ops->master(&daio->rscr); + + return 0; +} + +static int dao_clear_left_input(struct dao *dao) +{ + struct imapper *entry; + struct daio *daio = &dao->daio; + int i; + + if (NULL == dao->imappers[0]) + return 0; + + entry = dao->imappers[0]; + dao->mgr->imap_delete(dao->mgr, entry); + /* Program conjugate resources */ + for (i = 1; i < daio->rscl.msr; i++) { + entry = dao->imappers[i]; + dao->mgr->imap_delete(dao->mgr, entry); + dao->imappers[i] = NULL; + } + + kfree(dao->imappers[0]); + dao->imappers[0] = NULL; + + return 0; +} + +static int dao_clear_right_input(struct dao *dao) +{ + struct imapper *entry; + struct daio *daio = &dao->daio; + int i; + + if (NULL == dao->imappers[daio->rscl.msr]) + return 0; + + entry = dao->imappers[daio->rscl.msr]; + dao->mgr->imap_delete(dao->mgr, entry); + /* Program conjugate resources */ + for (i = 1; i < daio->rscr.msr; i++) { + entry = dao->imappers[daio->rscl.msr + i]; + dao->mgr->imap_delete(dao->mgr, entry); + dao->imappers[daio->rscl.msr + i] = NULL; + } + + kfree(dao->imappers[daio->rscl.msr]); + dao->imappers[daio->rscl.msr] = NULL; + + return 0; +} + +static struct dao_rsc_ops dao_ops = { + .set_spos = dao_spdif_set_spos, + .commit_write = dao_commit_write, + .get_spos = dao_spdif_get_spos, + .reinit = dao_rsc_reinit, + .set_left_input = dao_set_left_input, + .set_right_input = dao_set_right_input, + .clear_left_input = dao_clear_left_input, + .clear_right_input = dao_clear_right_input, +}; + +static int dai_set_srt_srcl(struct dai *dai, struct rsc *src) +{ + src->ops->master(src); + ((struct hw *)dai->hw)->dai_srt_set_srcm(dai->ctrl_blk, + src->ops->index(src)); + return 0; +} + +static int dai_set_srt_srcr(struct dai *dai, struct rsc *src) +{ + src->ops->master(src); + ((struct hw *)dai->hw)->dai_srt_set_srco(dai->ctrl_blk, + src->ops->index(src)); + return 0; +} + +static int dai_set_srt_msr(struct dai *dai, unsigned int msr) +{ + unsigned int rsr; + + for (rsr = 0; msr > 1; msr >>= 1) + rsr++; + + ((struct hw *)dai->hw)->dai_srt_set_rsr(dai->ctrl_blk, rsr); + return 0; +} + +static int dai_set_enb_src(struct dai *dai, unsigned int enb) +{ + ((struct hw *)dai->hw)->dai_srt_set_ec(dai->ctrl_blk, enb); + return 0; +} + +static int dai_set_enb_srt(struct dai *dai, unsigned int enb) +{ + ((struct hw *)dai->hw)->dai_srt_set_et(dai->ctrl_blk, enb); + return 0; +} + +static int dai_commit_write(struct dai *dai) +{ + ((struct hw *)dai->hw)->dai_commit_write(dai->hw, + daio_device_index(dai->daio.type, dai->hw), dai->ctrl_blk); + return 0; +} + +static struct dai_rsc_ops dai_ops = { + .set_srt_srcl = dai_set_srt_srcl, + .set_srt_srcr = dai_set_srt_srcr, + .set_srt_msr = dai_set_srt_msr, + .set_enb_src = dai_set_enb_src, + .set_enb_srt = dai_set_enb_srt, + .commit_write = dai_commit_write, +}; + +static int daio_rsc_init(struct daio *daio, + const struct daio_desc *desc, + void *hw) +{ + int err; + unsigned int idx_l, idx_r; + + switch (((struct hw *)hw)->chip_type) { + case ATC20K1: + idx_l = idx_20k1[desc->type].left; + idx_r = idx_20k1[desc->type].right; + break; + case ATC20K2: + idx_l = idx_20k2[desc->type].left; + idx_r = idx_20k2[desc->type].right; + break; + default: + return -EINVAL; + } + err = rsc_init(&daio->rscl, idx_l, DAIO, desc->msr, hw); + if (err) + return err; + + err = rsc_init(&daio->rscr, idx_r, DAIO, desc->msr, hw); + if (err) + goto error1; + + /* Set daio->rscl/r->ops to daio specific ones */ + if (desc->type <= DAIO_OUT_MAX) { + daio->rscl.ops = daio->rscr.ops = &daio_out_rsc_ops; + } else { + switch (((struct hw *)hw)->chip_type) { + case ATC20K1: + daio->rscl.ops = daio->rscr.ops = &daio_in_rsc_ops_20k1; + break; + case ATC20K2: + daio->rscl.ops = daio->rscr.ops = &daio_in_rsc_ops_20k2; + break; + default: + break; + } + } + daio->type = desc->type; + + return 0; + +error1: + rsc_uninit(&daio->rscl); + return err; +} + +static int daio_rsc_uninit(struct daio *daio) +{ + rsc_uninit(&daio->rscl); + rsc_uninit(&daio->rscr); + + return 0; +} + +static int dao_rsc_init(struct dao *dao, + const struct daio_desc *desc, + struct daio_mgr *mgr) +{ + struct hw *hw = mgr->mgr.hw; + unsigned int conf; + int err; + + err = daio_rsc_init(&dao->daio, desc, mgr->mgr.hw); + if (err) + return err; + + dao->imappers = kzalloc(sizeof(void *)*desc->msr*2, GFP_KERNEL); + if (NULL == dao->imappers) { + err = -ENOMEM; + goto error1; + } + dao->ops = &dao_ops; + dao->mgr = mgr; + dao->hw = hw; + err = hw->dao_get_ctrl_blk(&dao->ctrl_blk); + if (err) + goto error2; + + hw->daio_mgr_dsb_dao(mgr->mgr.ctrl_blk, + daio_device_index(dao->daio.type, hw)); + hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk); + + conf = (desc->msr & 0x7) | (desc->passthru << 3); + hw->daio_mgr_dao_init(mgr->mgr.ctrl_blk, + daio_device_index(dao->daio.type, hw), conf); + hw->daio_mgr_enb_dao(mgr->mgr.ctrl_blk, + daio_device_index(dao->daio.type, hw)); + hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk); + + return 0; + +error2: + kfree(dao->imappers); + dao->imappers = NULL; +error1: + daio_rsc_uninit(&dao->daio); + return err; +} + +static int dao_rsc_uninit(struct dao *dao) +{ + if (NULL != dao->imappers) { + if (NULL != dao->imappers[0]) + dao_clear_left_input(dao); + + if (NULL != dao->imappers[dao->daio.rscl.msr]) + dao_clear_right_input(dao); + + kfree(dao->imappers); + dao->imappers = NULL; + } + ((struct hw *)dao->hw)->dao_put_ctrl_blk(dao->ctrl_blk); + dao->hw = dao->ctrl_blk = NULL; + daio_rsc_uninit(&dao->daio); + + return 0; +} + +static int dao_rsc_reinit(struct dao *dao, const struct dao_desc *desc) +{ + struct daio_mgr *mgr = dao->mgr; + struct daio_desc dsc = {0}; + + dsc.type = dao->daio.type; + dsc.msr = desc->msr; + dsc.passthru = desc->passthru; + dao_rsc_uninit(dao); + return dao_rsc_init(dao, &dsc, mgr); +} + +static int dai_rsc_init(struct dai *dai, + const struct daio_desc *desc, + struct daio_mgr *mgr) +{ + int err; + struct hw *hw = mgr->mgr.hw; + unsigned int rsr, msr; + + err = daio_rsc_init(&dai->daio, desc, mgr->mgr.hw); + if (err) + return err; + + dai->ops = &dai_ops; + dai->hw = mgr->mgr.hw; + err = hw->dai_get_ctrl_blk(&dai->ctrl_blk); + if (err) + goto error1; + + for (rsr = 0, msr = desc->msr; msr > 1; msr >>= 1) + rsr++; + + hw->dai_srt_set_rsr(dai->ctrl_blk, rsr); + hw->dai_srt_set_drat(dai->ctrl_blk, 0); + /* default to disabling control of a SRC */ + hw->dai_srt_set_ec(dai->ctrl_blk, 0); + hw->dai_srt_set_et(dai->ctrl_blk, 0); /* default to disabling SRT */ + hw->dai_commit_write(hw, + daio_device_index(dai->daio.type, dai->hw), dai->ctrl_blk); + + return 0; + +error1: + daio_rsc_uninit(&dai->daio); + return err; +} + +static int dai_rsc_uninit(struct dai *dai) +{ + ((struct hw *)dai->hw)->dai_put_ctrl_blk(dai->ctrl_blk); + dai->hw = dai->ctrl_blk = NULL; + daio_rsc_uninit(&dai->daio); + return 0; +} + +static int daio_mgr_get_rsc(struct rsc_mgr *mgr, enum DAIOTYP type) +{ + if (((union daio_usage *)mgr->rscs)->data & (0x1 << type)) + return -ENOENT; + + ((union daio_usage *)mgr->rscs)->data |= (0x1 << type); + + return 0; +} + +static int daio_mgr_put_rsc(struct rsc_mgr *mgr, enum DAIOTYP type) +{ + ((union daio_usage *)mgr->rscs)->data &= ~(0x1 << type); + + return 0; +} + +static int get_daio_rsc(struct daio_mgr *mgr, + const struct daio_desc *desc, + struct daio **rdaio) +{ + int err; + struct dai *dai = NULL; + struct dao *dao = NULL; + unsigned long flags; + + *rdaio = NULL; + + /* Check whether there are sufficient daio resources to meet request. */ + spin_lock_irqsave(&mgr->mgr_lock, flags); + err = daio_mgr_get_rsc(&mgr->mgr, desc->type); + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + if (err) { + printk(KERN_ERR "Can't meet DAIO resource request!\n"); + return err; + } + + /* Allocate mem for daio resource */ + if (desc->type <= DAIO_OUT_MAX) { + dao = kzalloc(sizeof(*dao), GFP_KERNEL); + if (NULL == dao) { + err = -ENOMEM; + goto error; + } + err = dao_rsc_init(dao, desc, mgr); + if (err) + goto error; + + *rdaio = &dao->daio; + } else { + dai = kzalloc(sizeof(*dai), GFP_KERNEL); + if (NULL == dai) { + err = -ENOMEM; + goto error; + } + err = dai_rsc_init(dai, desc, mgr); + if (err) + goto error; + + *rdaio = &dai->daio; + } + + mgr->daio_enable(mgr, *rdaio); + mgr->commit_write(mgr); + + return 0; + +error: + if (NULL != dao) + kfree(dao); + else if (NULL != dai) + kfree(dai); + + spin_lock_irqsave(&mgr->mgr_lock, flags); + daio_mgr_put_rsc(&mgr->mgr, desc->type); + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + return err; +} + +static int put_daio_rsc(struct daio_mgr *mgr, struct daio *daio) +{ + unsigned long flags; + + mgr->daio_disable(mgr, daio); + mgr->commit_write(mgr); + + spin_lock_irqsave(&mgr->mgr_lock, flags); + daio_mgr_put_rsc(&mgr->mgr, daio->type); + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + + if (daio->type <= DAIO_OUT_MAX) { + dao_rsc_uninit(container_of(daio, struct dao, daio)); + kfree(container_of(daio, struct dao, daio)); + } else { + dai_rsc_uninit(container_of(daio, struct dai, daio)); + kfree(container_of(daio, struct dai, daio)); + } + + return 0; +} + +static int daio_mgr_enb_daio(struct daio_mgr *mgr, struct daio *daio) +{ + struct hw *hw = mgr->mgr.hw; + + if (DAIO_OUT_MAX >= daio->type) { + hw->daio_mgr_enb_dao(mgr->mgr.ctrl_blk, + daio_device_index(daio->type, hw)); + } else { + hw->daio_mgr_enb_dai(mgr->mgr.ctrl_blk, + daio_device_index(daio->type, hw)); + } + return 0; +} + +static int daio_mgr_dsb_daio(struct daio_mgr *mgr, struct daio *daio) +{ + struct hw *hw = mgr->mgr.hw; + + if (DAIO_OUT_MAX >= daio->type) { + hw->daio_mgr_dsb_dao(mgr->mgr.ctrl_blk, + daio_device_index(daio->type, hw)); + } else { + hw->daio_mgr_dsb_dai(mgr->mgr.ctrl_blk, + daio_device_index(daio->type, hw)); + } + return 0; +} + +static int daio_map_op(void *data, struct imapper *entry) +{ + struct rsc_mgr *mgr = &((struct daio_mgr *)data)->mgr; + struct hw *hw = mgr->hw; + + hw->daio_mgr_set_imaparc(mgr->ctrl_blk, entry->slot); + hw->daio_mgr_set_imapnxt(mgr->ctrl_blk, entry->next); + hw->daio_mgr_set_imapaddr(mgr->ctrl_blk, entry->addr); + hw->daio_mgr_commit_write(mgr->hw, mgr->ctrl_blk); + + return 0; +} + +static int daio_imap_add(struct daio_mgr *mgr, struct imapper *entry) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&mgr->imap_lock, flags); + if ((0 == entry->addr) && (mgr->init_imap_added)) { + input_mapper_delete(&mgr->imappers, mgr->init_imap, + daio_map_op, mgr); + mgr->init_imap_added = 0; + } + err = input_mapper_add(&mgr->imappers, entry, daio_map_op, mgr); + spin_unlock_irqrestore(&mgr->imap_lock, flags); + + return err; +} + +static int daio_imap_delete(struct daio_mgr *mgr, struct imapper *entry) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&mgr->imap_lock, flags); + err = input_mapper_delete(&mgr->imappers, entry, daio_map_op, mgr); + if (list_empty(&mgr->imappers)) { + input_mapper_add(&mgr->imappers, mgr->init_imap, + daio_map_op, mgr); + mgr->init_imap_added = 1; + } + spin_unlock_irqrestore(&mgr->imap_lock, flags); + + return err; +} + +static int daio_mgr_commit_write(struct daio_mgr *mgr) +{ + struct hw *hw = mgr->mgr.hw; + + hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk); + return 0; +} + +int daio_mgr_create(void *hw, struct daio_mgr **rdaio_mgr) +{ + int err, i; + struct daio_mgr *daio_mgr; + struct imapper *entry; + + *rdaio_mgr = NULL; + daio_mgr = kzalloc(sizeof(*daio_mgr), GFP_KERNEL); + if (NULL == daio_mgr) + return -ENOMEM; + + err = rsc_mgr_init(&daio_mgr->mgr, DAIO, DAIO_RESOURCE_NUM, hw); + if (err) + goto error1; + + spin_lock_init(&daio_mgr->mgr_lock); + spin_lock_init(&daio_mgr->imap_lock); + INIT_LIST_HEAD(&daio_mgr->imappers); + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (NULL == entry) { + err = -ENOMEM; + goto error2; + } + entry->slot = entry->addr = entry->next = entry->user = 0; + list_add(&entry->list, &daio_mgr->imappers); + daio_mgr->init_imap = entry; + daio_mgr->init_imap_added = 1; + + daio_mgr->get_daio = get_daio_rsc; + daio_mgr->put_daio = put_daio_rsc; + daio_mgr->daio_enable = daio_mgr_enb_daio; + daio_mgr->daio_disable = daio_mgr_dsb_daio; + daio_mgr->imap_add = daio_imap_add; + daio_mgr->imap_delete = daio_imap_delete; + daio_mgr->commit_write = daio_mgr_commit_write; + + for (i = 0; i < 8; i++) { + ((struct hw *)hw)->daio_mgr_dsb_dao(daio_mgr->mgr.ctrl_blk, i); + ((struct hw *)hw)->daio_mgr_dsb_dai(daio_mgr->mgr.ctrl_blk, i); + } + ((struct hw *)hw)->daio_mgr_commit_write(hw, daio_mgr->mgr.ctrl_blk); + + *rdaio_mgr = daio_mgr; + + return 0; + +error2: + rsc_mgr_uninit(&daio_mgr->mgr); +error1: + kfree(daio_mgr); + return err; +} + +int daio_mgr_destroy(struct daio_mgr *daio_mgr) +{ + unsigned long flags; + + /* free daio input mapper list */ + spin_lock_irqsave(&daio_mgr->imap_lock, flags); + free_input_mapper_list(&daio_mgr->imappers); + spin_unlock_irqrestore(&daio_mgr->imap_lock, flags); + + rsc_mgr_uninit(&daio_mgr->mgr); + kfree(daio_mgr); + + return 0; +} + diff --git a/sound/pci/ctxfi/ctdaio.h b/sound/pci/ctxfi/ctdaio.h new file mode 100644 index 0000000..0f52ce5 --- /dev/null +++ b/sound/pci/ctxfi/ctdaio.h @@ -0,0 +1,122 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctdaio.h + * + * @Brief + * This file contains the definition of Digital Audio Input Output + * resource management object. + * + * @Author Liu Chun + * @Date May 23 2008 + * + */ + +#ifndef CTDAIO_H +#define CTDAIO_H + +#include "ctresource.h" +#include "ctimap.h" +#include +#include + +/* Define the descriptor of a daio resource */ +enum DAIOTYP { + LINEO1, + LINEO2, + LINEO3, + LINEO4, + SPDIFOO, /* S/PDIF Out (Flexijack/Optical) */ + LINEIM, + SPDIFIO, /* S/PDIF In (Flexijack/Optical) on the card */ + SPDIFI1, /* S/PDIF In on internal Drive Bay */ + NUM_DAIOTYP +}; + +struct dao_rsc_ops; +struct dai_rsc_ops; +struct daio_mgr; + +struct daio { + struct rsc rscl; /* Basic resource info for left TX/RX */ + struct rsc rscr; /* Basic resource info for right TX/RX */ + enum DAIOTYP type; +}; + +struct dao { + struct daio daio; + struct dao_rsc_ops *ops; /* DAO specific operations */ + struct imapper **imappers; + struct daio_mgr *mgr; + void *hw; + void *ctrl_blk; +}; + +struct dai { + struct daio daio; + struct dai_rsc_ops *ops; /* DAI specific operations */ + void *hw; + void *ctrl_blk; +}; + +struct dao_desc { + unsigned int msr:4; + unsigned int passthru:1; +}; + +struct dao_rsc_ops { + int (*set_spos)(struct dao *dao, unsigned int spos); + int (*commit_write)(struct dao *dao); + int (*get_spos)(struct dao *dao, unsigned int *spos); + int (*reinit)(struct dao *dao, const struct dao_desc *desc); + int (*set_left_input)(struct dao *dao, struct rsc *input); + int (*set_right_input)(struct dao *dao, struct rsc *input); + int (*clear_left_input)(struct dao *dao); + int (*clear_right_input)(struct dao *dao); +}; + +struct dai_rsc_ops { + int (*set_srt_srcl)(struct dai *dai, struct rsc *src); + int (*set_srt_srcr)(struct dai *dai, struct rsc *src); + int (*set_srt_msr)(struct dai *dai, unsigned int msr); + int (*set_enb_src)(struct dai *dai, unsigned int enb); + int (*set_enb_srt)(struct dai *dai, unsigned int enb); + int (*commit_write)(struct dai *dai); +}; + +/* Define daio resource request description info */ +struct daio_desc { + unsigned int type:4; + unsigned int msr:4; + unsigned int passthru:1; +}; + +struct daio_mgr { + struct rsc_mgr mgr; /* Basic resource manager info */ + spinlock_t mgr_lock; + spinlock_t imap_lock; + struct list_head imappers; + struct imapper *init_imap; + unsigned int init_imap_added; + + /* request one daio resource */ + int (*get_daio)(struct daio_mgr *mgr, + const struct daio_desc *desc, struct daio **rdaio); + /* return one daio resource */ + int (*put_daio)(struct daio_mgr *mgr, struct daio *daio); + int (*daio_enable)(struct daio_mgr *mgr, struct daio *daio); + int (*daio_disable)(struct daio_mgr *mgr, struct daio *daio); + int (*imap_add)(struct daio_mgr *mgr, struct imapper *entry); + int (*imap_delete)(struct daio_mgr *mgr, struct imapper *entry); + int (*commit_write)(struct daio_mgr *mgr); +}; + +/* Constructor and destructor of daio resource manager */ +int daio_mgr_create(void *hw, struct daio_mgr **rdaio_mgr); +int daio_mgr_destroy(struct daio_mgr *daio_mgr); + +#endif /* CTDAIO_H */ diff --git a/sound/pci/ctxfi/cthardware.c b/sound/pci/ctxfi/cthardware.c new file mode 100644 index 0000000..8e64f48 --- /dev/null +++ b/sound/pci/ctxfi/cthardware.c @@ -0,0 +1,91 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File cthardware.c + * + * @Brief + * This file contains the implementation of hardware access methord. + * + * @Author Liu Chun + * @Date Jun 26 2008 + * + */ + +#include "cthardware.h" +#include "cthw20k1.h" +#include "cthw20k2.h" +#include + +int __devinit create_hw_obj(struct pci_dev *pci, enum CHIPTYP chip_type, + enum CTCARDS model, struct hw **rhw) +{ + int err; + + switch (chip_type) { + case ATC20K1: + err = create_20k1_hw_obj(rhw); + break; + case ATC20K2: + err = create_20k2_hw_obj(rhw); + break; + default: + err = -ENODEV; + break; + } + if (err) + return err; + + (*rhw)->pci = pci; + (*rhw)->chip_type = chip_type; + (*rhw)->model = model; + + return 0; +} + +int destroy_hw_obj(struct hw *hw) +{ + int err; + + switch (hw->pci->device) { + case 0x0005: /* 20k1 device */ + err = destroy_20k1_hw_obj(hw); + break; + case 0x000B: /* 20k2 device */ + err = destroy_20k2_hw_obj(hw); + break; + default: + err = -ENODEV; + break; + } + + return err; +} + +unsigned int get_field(unsigned int data, unsigned int field) +{ + int i; + + BUG_ON(!field); + /* @field should always be greater than 0 */ + for (i = 0; !(field & (1 << i)); ) + i++; + + return (data & field) >> i; +} + +void set_field(unsigned int *data, unsigned int field, unsigned int value) +{ + int i; + + BUG_ON(!field); + /* @field should always be greater than 0 */ + for (i = 0; !(field & (1 << i)); ) + i++; + + *data = (*data & (~field)) | ((value << i) & field); +} + diff --git a/sound/pci/ctxfi/cthardware.h b/sound/pci/ctxfi/cthardware.h new file mode 100644 index 0000000..4a8e04f --- /dev/null +++ b/sound/pci/ctxfi/cthardware.h @@ -0,0 +1,196 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File cthardware.h + * + * @Brief + * This file contains the definition of hardware access methord. + * + * @Author Liu Chun + * @Date May 13 2008 + * + */ + +#ifndef CTHARDWARE_H +#define CTHARDWARE_H + +#include +#include + +enum CHIPTYP { + ATC20K1, + ATC20K2, + ATCNONE +}; + +enum CTCARDS { + /* 20k1 models */ + CTSB055X, + CTSB073X, + CTUAA, + CT20K1_UNKNOWN, + /* 20k2 models */ + CTSB0760, + CTHENDRIX, + CTSB0880, + NUM_CTCARDS /* This should always be the last */ +}; + +/* Type of input source for ADC */ +enum ADCSRC{ + ADC_MICIN, + ADC_LINEIN, + ADC_VIDEO, + ADC_AUX, + ADC_NONE /* Switch to digital input */ +}; + +struct card_conf { + /* device virtual mem page table page physical addr + * (supporting one page table page now) */ + unsigned long vm_pgt_phys; + unsigned int rsr; /* reference sample rate in Hzs*/ + unsigned int msr; /* master sample rate in rsrs */ +}; + +struct hw { + int (*card_init)(struct hw *hw, struct card_conf *info); + int (*card_stop)(struct hw *hw); + int (*pll_init)(struct hw *hw, unsigned int rsr); + int (*is_adc_source_selected)(struct hw *hw, enum ADCSRC source); + int (*select_adc_source)(struct hw *hw, enum ADCSRC source); + int (*have_digit_io_switch)(struct hw *hw); + + /* SRC operations */ + int (*src_rsc_get_ctrl_blk)(void **rblk); + int (*src_rsc_put_ctrl_blk)(void *blk); + int (*src_set_state)(void *blk, unsigned int state); + int (*src_set_bm)(void *blk, unsigned int bm); + int (*src_set_rsr)(void *blk, unsigned int rsr); + int (*src_set_sf)(void *blk, unsigned int sf); + int (*src_set_wr)(void *blk, unsigned int wr); + int (*src_set_pm)(void *blk, unsigned int pm); + int (*src_set_rom)(void *blk, unsigned int rom); + int (*src_set_vo)(void *blk, unsigned int vo); + int (*src_set_st)(void *blk, unsigned int st); + int (*src_set_ie)(void *blk, unsigned int ie); + int (*src_set_ilsz)(void *blk, unsigned int ilsz); + int (*src_set_bp)(void *blk, unsigned int bp); + int (*src_set_cisz)(void *blk, unsigned int cisz); + int (*src_set_ca)(void *blk, unsigned int ca); + int (*src_set_sa)(void *blk, unsigned int sa); + int (*src_set_la)(void *blk, unsigned int la); + int (*src_set_pitch)(void *blk, unsigned int pitch); + int (*src_set_clear_zbufs)(void *blk, unsigned int clear); + int (*src_set_dirty)(void *blk, unsigned int flags); + int (*src_set_dirty_all)(void *blk); + int (*src_commit_write)(struct hw *hw, unsigned int idx, void *blk); + int (*src_get_ca)(struct hw *hw, unsigned int idx, void *blk); + unsigned int (*src_get_dirty)(void *blk); + unsigned int (*src_dirty_conj_mask)(void); + int (*src_mgr_get_ctrl_blk)(void **rblk); + int (*src_mgr_put_ctrl_blk)(void *blk); + /* syncly enable src @idx */ + int (*src_mgr_enbs_src)(void *blk, unsigned int idx); + /* enable src @idx */ + int (*src_mgr_enb_src)(void *blk, unsigned int idx); + /* disable src @idx */ + int (*src_mgr_dsb_src)(void *blk, unsigned int idx); + int (*src_mgr_commit_write)(struct hw *hw, void *blk); + + /* SRC Input Mapper operations */ + int (*srcimp_mgr_get_ctrl_blk)(void **rblk); + int (*srcimp_mgr_put_ctrl_blk)(void *blk); + int (*srcimp_mgr_set_imaparc)(void *blk, unsigned int slot); + int (*srcimp_mgr_set_imapuser)(void *blk, unsigned int user); + int (*srcimp_mgr_set_imapnxt)(void *blk, unsigned int next); + int (*srcimp_mgr_set_imapaddr)(void *blk, unsigned int addr); + int (*srcimp_mgr_commit_write)(struct hw *hw, void *blk); + + /* AMIXER operations */ + int (*amixer_rsc_get_ctrl_blk)(void **rblk); + int (*amixer_rsc_put_ctrl_blk)(void *blk); + int (*amixer_mgr_get_ctrl_blk)(void **rblk); + int (*amixer_mgr_put_ctrl_blk)(void *blk); + int (*amixer_set_mode)(void *blk, unsigned int mode); + int (*amixer_set_iv)(void *blk, unsigned int iv); + int (*amixer_set_x)(void *blk, unsigned int x); + int (*amixer_set_y)(void *blk, unsigned int y); + int (*amixer_set_sadr)(void *blk, unsigned int sadr); + int (*amixer_set_se)(void *blk, unsigned int se); + int (*amixer_set_dirty)(void *blk, unsigned int flags); + int (*amixer_set_dirty_all)(void *blk); + int (*amixer_commit_write)(struct hw *hw, unsigned int idx, void *blk); + int (*amixer_get_y)(void *blk); + unsigned int (*amixer_get_dirty)(void *blk); + + /* DAIO operations */ + int (*dai_get_ctrl_blk)(void **rblk); + int (*dai_put_ctrl_blk)(void *blk); + int (*dai_srt_set_srco)(void *blk, unsigned int src); + int (*dai_srt_set_srcm)(void *blk, unsigned int src); + int (*dai_srt_set_rsr)(void *blk, unsigned int rsr); + int (*dai_srt_set_drat)(void *blk, unsigned int drat); + int (*dai_srt_set_ec)(void *blk, unsigned int ec); + int (*dai_srt_set_et)(void *blk, unsigned int et); + int (*dai_commit_write)(struct hw *hw, unsigned int idx, void *blk); + int (*dao_get_ctrl_blk)(void **rblk); + int (*dao_put_ctrl_blk)(void *blk); + int (*dao_set_spos)(void *blk, unsigned int spos); + int (*dao_commit_write)(struct hw *hw, unsigned int idx, void *blk); + int (*dao_get_spos)(void *blk, unsigned int *spos); + + int (*daio_mgr_get_ctrl_blk)(struct hw *hw, void **rblk); + int (*daio_mgr_put_ctrl_blk)(void *blk); + int (*daio_mgr_enb_dai)(void *blk, unsigned int idx); + int (*daio_mgr_dsb_dai)(void *blk, unsigned int idx); + int (*daio_mgr_enb_dao)(void *blk, unsigned int idx); + int (*daio_mgr_dsb_dao)(void *blk, unsigned int idx); + int (*daio_mgr_dao_init)(void *blk, unsigned int idx, + unsigned int conf); + int (*daio_mgr_set_imaparc)(void *blk, unsigned int slot); + int (*daio_mgr_set_imapnxt)(void *blk, unsigned int next); + int (*daio_mgr_set_imapaddr)(void *blk, unsigned int addr); + int (*daio_mgr_commit_write)(struct hw *hw, void *blk); + + int (*set_timer_irq)(struct hw *hw, int enable); + int (*set_timer_tick)(struct hw *hw, unsigned int tick); + unsigned int (*get_wc)(struct hw *hw); + + void (*irq_callback)(void *data, unsigned int bit); + void *irq_callback_data; + + struct pci_dev *pci; /* the pci kernel structure of this card */ + int irq; + unsigned long io_base; + unsigned long mem_base; + + enum CHIPTYP chip_type; + enum CTCARDS model; +}; + +int create_hw_obj(struct pci_dev *pci, enum CHIPTYP chip_type, + enum CTCARDS model, struct hw **rhw); +int destroy_hw_obj(struct hw *hw); + +unsigned int get_field(unsigned int data, unsigned int field); +void set_field(unsigned int *data, unsigned int field, unsigned int value); + +/* IRQ bits */ +#define PLL_INT (1 << 10) /* PLL input-clock out-of-range */ +#define FI_INT (1 << 9) /* forced interrupt */ +#define IT_INT (1 << 8) /* timer interrupt */ +#define PCI_INT (1 << 7) /* PCI bus error pending */ +#define URT_INT (1 << 6) /* UART Tx/Rx */ +#define GPI_INT (1 << 5) /* GPI pin */ +#define MIX_INT (1 << 4) /* mixer parameter segment FIFO channels */ +#define DAI_INT (1 << 3) /* DAI (SR-tracker or SPDIF-receiver) */ +#define TP_INT (1 << 2) /* transport priority queue */ +#define DSP_INT (1 << 1) /* DSP */ +#define SRC_INT (1 << 0) /* SRC channels */ + +#endif /* CTHARDWARE_H */ diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c new file mode 100644 index 0000000..cb69d9d --- /dev/null +++ b/sound/pci/ctxfi/cthw20k1.c @@ -0,0 +1,2248 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File cthw20k1.c + * + * @Brief + * This file contains the implementation of hardware access methord for 20k1. + * + * @Author Liu Chun + * @Date Jun 24 2008 + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "cthw20k1.h" +#include "ct20k1reg.h" + +#if BITS_PER_LONG == 32 +#define CT_XFI_DMA_MASK DMA_BIT_MASK(32) /* 32 bit PTE */ +#else +#define CT_XFI_DMA_MASK DMA_BIT_MASK(64) /* 64 bit PTE */ +#endif + +struct hw20k1 { + struct hw hw; + spinlock_t reg_20k1_lock; + spinlock_t reg_pci_lock; +}; + +static u32 hw_read_20kx(struct hw *hw, u32 reg); +static void hw_write_20kx(struct hw *hw, u32 reg, u32 data); +static u32 hw_read_pci(struct hw *hw, u32 reg); +static void hw_write_pci(struct hw *hw, u32 reg, u32 data); + +/* + * Type definition block. + * The layout of control structures can be directly applied on 20k2 chip. + */ + +/* + * SRC control block definitions. + */ + +/* SRC resource control block */ +#define SRCCTL_STATE 0x00000007 +#define SRCCTL_BM 0x00000008 +#define SRCCTL_RSR 0x00000030 +#define SRCCTL_SF 0x000001C0 +#define SRCCTL_WR 0x00000200 +#define SRCCTL_PM 0x00000400 +#define SRCCTL_ROM 0x00001800 +#define SRCCTL_VO 0x00002000 +#define SRCCTL_ST 0x00004000 +#define SRCCTL_IE 0x00008000 +#define SRCCTL_ILSZ 0x000F0000 +#define SRCCTL_BP 0x00100000 + +#define SRCCCR_CISZ 0x000007FF +#define SRCCCR_CWA 0x001FF800 +#define SRCCCR_D 0x00200000 +#define SRCCCR_RS 0x01C00000 +#define SRCCCR_NAL 0x3E000000 +#define SRCCCR_RA 0xC0000000 + +#define SRCCA_CA 0x03FFFFFF +#define SRCCA_RS 0x1C000000 +#define SRCCA_NAL 0xE0000000 + +#define SRCSA_SA 0x03FFFFFF + +#define SRCLA_LA 0x03FFFFFF + +/* Mixer Parameter Ring ram Low and Hight register. + * Fixed-point value in 8.24 format for parameter channel */ +#define MPRLH_PITCH 0xFFFFFFFF + +/* SRC resource register dirty flags */ +union src_dirty { + struct { + u16 ctl:1; + u16 ccr:1; + u16 sa:1; + u16 la:1; + u16 ca:1; + u16 mpr:1; + u16 czbfs:1; /* Clear Z-Buffers */ + u16 rsv:9; + } bf; + u16 data; +}; + +struct src_rsc_ctrl_blk { + unsigned int ctl; + unsigned int ccr; + unsigned int ca; + unsigned int sa; + unsigned int la; + unsigned int mpr; + union src_dirty dirty; +}; + +/* SRC manager control block */ +union src_mgr_dirty { + struct { + u16 enb0:1; + u16 enb1:1; + u16 enb2:1; + u16 enb3:1; + u16 enb4:1; + u16 enb5:1; + u16 enb6:1; + u16 enb7:1; + u16 enbsa:1; + u16 rsv:7; + } bf; + u16 data; +}; + +struct src_mgr_ctrl_blk { + unsigned int enbsa; + unsigned int enb[8]; + union src_mgr_dirty dirty; +}; + +/* SRCIMP manager control block */ +#define SRCAIM_ARC 0x00000FFF +#define SRCAIM_NXT 0x00FF0000 +#define SRCAIM_SRC 0xFF000000 + +struct srcimap { + unsigned int srcaim; + unsigned int idx; +}; + +/* SRCIMP manager register dirty flags */ +union srcimp_mgr_dirty { + struct { + u16 srcimap:1; + u16 rsv:15; + } bf; + u16 data; +}; + +struct srcimp_mgr_ctrl_blk { + struct srcimap srcimap; + union srcimp_mgr_dirty dirty; +}; + +/* + * Function implementation block. + */ + +static int src_get_rsc_ctrl_blk(void **rblk) +{ + struct src_rsc_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int src_put_rsc_ctrl_blk(void *blk) +{ + kfree((struct src_rsc_ctrl_blk *)blk); + + return 0; +} + +static int src_set_state(void *blk, unsigned int state) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_STATE, state); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_bm(void *blk, unsigned int bm) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_BM, bm); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_rsr(void *blk, unsigned int rsr) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_RSR, rsr); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_sf(void *blk, unsigned int sf) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_SF, sf); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_wr(void *blk, unsigned int wr) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_WR, wr); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_pm(void *blk, unsigned int pm) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_PM, pm); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_rom(void *blk, unsigned int rom) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_ROM, rom); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_vo(void *blk, unsigned int vo) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_VO, vo); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_st(void *blk, unsigned int st) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_ST, st); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_ie(void *blk, unsigned int ie) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_IE, ie); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_ilsz(void *blk, unsigned int ilsz) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_ILSZ, ilsz); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_bp(void *blk, unsigned int bp) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_BP, bp); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_cisz(void *blk, unsigned int cisz) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ccr, SRCCCR_CISZ, cisz); + ctl->dirty.bf.ccr = 1; + return 0; +} + +static int src_set_ca(void *blk, unsigned int ca) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ca, SRCCA_CA, ca); + ctl->dirty.bf.ca = 1; + return 0; +} + +static int src_set_sa(void *blk, unsigned int sa) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->sa, SRCSA_SA, sa); + ctl->dirty.bf.sa = 1; + return 0; +} + +static int src_set_la(void *blk, unsigned int la) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->la, SRCLA_LA, la); + ctl->dirty.bf.la = 1; + return 0; +} + +static int src_set_pitch(void *blk, unsigned int pitch) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->mpr, MPRLH_PITCH, pitch); + ctl->dirty.bf.mpr = 1; + return 0; +} + +static int src_set_clear_zbufs(void *blk, unsigned int clear) +{ + ((struct src_rsc_ctrl_blk *)blk)->dirty.bf.czbfs = (clear ? 1 : 0); + return 0; +} + +static int src_set_dirty(void *blk, unsigned int flags) +{ + ((struct src_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff); + return 0; +} + +static int src_set_dirty_all(void *blk) +{ + ((struct src_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0); + return 0; +} + +#define AR_SLOT_SIZE 4096 +#define AR_SLOT_BLOCK_SIZE 16 +#define AR_PTS_PITCH 6 +#define AR_PARAM_SRC_OFFSET 0x60 + +static unsigned int src_param_pitch_mixer(unsigned int src_idx) +{ + return ((src_idx << 4) + AR_PTS_PITCH + AR_SLOT_SIZE + - AR_PARAM_SRC_OFFSET) % AR_SLOT_SIZE; + +} + +static int src_commit_write(struct hw *hw, unsigned int idx, void *blk) +{ + struct src_rsc_ctrl_blk *ctl = blk; + int i; + + if (ctl->dirty.bf.czbfs) { + /* Clear Z-Buffer registers */ + for (i = 0; i < 8; i++) + hw_write_20kx(hw, SRCUPZ+idx*0x100+i*0x4, 0); + + for (i = 0; i < 4; i++) + hw_write_20kx(hw, SRCDN0Z+idx*0x100+i*0x4, 0); + + for (i = 0; i < 8; i++) + hw_write_20kx(hw, SRCDN1Z+idx*0x100+i*0x4, 0); + + ctl->dirty.bf.czbfs = 0; + } + if (ctl->dirty.bf.mpr) { + /* Take the parameter mixer resource in the same group as that + * the idx src is in for simplicity. Unlike src, all conjugate + * parameter mixer resources must be programmed for + * corresponding conjugate src resources. */ + unsigned int pm_idx = src_param_pitch_mixer(idx); + hw_write_20kx(hw, PRING_LO_HI+4*pm_idx, ctl->mpr); + hw_write_20kx(hw, PMOPLO+8*pm_idx, 0x3); + hw_write_20kx(hw, PMOPHI+8*pm_idx, 0x0); + ctl->dirty.bf.mpr = 0; + } + if (ctl->dirty.bf.sa) { + hw_write_20kx(hw, SRCSA+idx*0x100, ctl->sa); + ctl->dirty.bf.sa = 0; + } + if (ctl->dirty.bf.la) { + hw_write_20kx(hw, SRCLA+idx*0x100, ctl->la); + ctl->dirty.bf.la = 0; + } + if (ctl->dirty.bf.ca) { + hw_write_20kx(hw, SRCCA+idx*0x100, ctl->ca); + ctl->dirty.bf.ca = 0; + } + + /* Write srccf register */ + hw_write_20kx(hw, SRCCF+idx*0x100, 0x0); + + if (ctl->dirty.bf.ccr) { + hw_write_20kx(hw, SRCCCR+idx*0x100, ctl->ccr); + ctl->dirty.bf.ccr = 0; + } + if (ctl->dirty.bf.ctl) { + hw_write_20kx(hw, SRCCTL+idx*0x100, ctl->ctl); + ctl->dirty.bf.ctl = 0; + } + + return 0; +} + +static int src_get_ca(struct hw *hw, unsigned int idx, void *blk) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + ctl->ca = hw_read_20kx(hw, SRCCA+idx*0x100); + ctl->dirty.bf.ca = 0; + + return get_field(ctl->ca, SRCCA_CA); +} + +static unsigned int src_get_dirty(void *blk) +{ + return ((struct src_rsc_ctrl_blk *)blk)->dirty.data; +} + +static unsigned int src_dirty_conj_mask(void) +{ + return 0x20; +} + +static int src_mgr_enbs_src(void *blk, unsigned int idx) +{ + ((struct src_mgr_ctrl_blk *)blk)->enbsa = ~(0x0); + ((struct src_mgr_ctrl_blk *)blk)->dirty.bf.enbsa = 1; + ((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32)); + return 0; +} + +static int src_mgr_enb_src(void *blk, unsigned int idx) +{ + ((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32)); + ((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32)); + return 0; +} + +static int src_mgr_dsb_src(void *blk, unsigned int idx) +{ + ((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] &= ~(0x1 << (idx%32)); + ((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32)); + return 0; +} + +static int src_mgr_commit_write(struct hw *hw, void *blk) +{ + struct src_mgr_ctrl_blk *ctl = blk; + int i; + unsigned int ret; + + if (ctl->dirty.bf.enbsa) { + do { + ret = hw_read_20kx(hw, SRCENBSTAT); + } while (ret & 0x1); + hw_write_20kx(hw, SRCENBS, ctl->enbsa); + ctl->dirty.bf.enbsa = 0; + } + for (i = 0; i < 8; i++) { + if ((ctl->dirty.data & (0x1 << i))) { + hw_write_20kx(hw, SRCENB+(i*0x100), ctl->enb[i]); + ctl->dirty.data &= ~(0x1 << i); + } + } + + return 0; +} + +static int src_mgr_get_ctrl_blk(void **rblk) +{ + struct src_mgr_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int src_mgr_put_ctrl_blk(void *blk) +{ + kfree((struct src_mgr_ctrl_blk *)blk); + + return 0; +} + +static int srcimp_mgr_get_ctrl_blk(void **rblk) +{ + struct srcimp_mgr_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int srcimp_mgr_put_ctrl_blk(void *blk) +{ + kfree((struct srcimp_mgr_ctrl_blk *)blk); + + return 0; +} + +static int srcimp_mgr_set_imaparc(void *blk, unsigned int slot) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->srcimap.srcaim, SRCAIM_ARC, slot); + ctl->dirty.bf.srcimap = 1; + return 0; +} + +static int srcimp_mgr_set_imapuser(void *blk, unsigned int user) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->srcimap.srcaim, SRCAIM_SRC, user); + ctl->dirty.bf.srcimap = 1; + return 0; +} + +static int srcimp_mgr_set_imapnxt(void *blk, unsigned int next) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->srcimap.srcaim, SRCAIM_NXT, next); + ctl->dirty.bf.srcimap = 1; + return 0; +} + +static int srcimp_mgr_set_imapaddr(void *blk, unsigned int addr) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + ctl->srcimap.idx = addr; + ctl->dirty.bf.srcimap = 1; + return 0; +} + +static int srcimp_mgr_commit_write(struct hw *hw, void *blk) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + if (ctl->dirty.bf.srcimap) { + hw_write_20kx(hw, SRCIMAP+ctl->srcimap.idx*0x100, + ctl->srcimap.srcaim); + ctl->dirty.bf.srcimap = 0; + } + + return 0; +} + +/* + * AMIXER control block definitions. + */ + +#define AMOPLO_M 0x00000003 +#define AMOPLO_X 0x0003FFF0 +#define AMOPLO_Y 0xFFFC0000 + +#define AMOPHI_SADR 0x000000FF +#define AMOPHI_SE 0x80000000 + +/* AMIXER resource register dirty flags */ +union amixer_dirty { + struct { + u16 amoplo:1; + u16 amophi:1; + u16 rsv:14; + } bf; + u16 data; +}; + +/* AMIXER resource control block */ +struct amixer_rsc_ctrl_blk { + unsigned int amoplo; + unsigned int amophi; + union amixer_dirty dirty; +}; + +static int amixer_set_mode(void *blk, unsigned int mode) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amoplo, AMOPLO_M, mode); + ctl->dirty.bf.amoplo = 1; + return 0; +} + +static int amixer_set_iv(void *blk, unsigned int iv) +{ + /* 20k1 amixer does not have this field */ + return 0; +} + +static int amixer_set_x(void *blk, unsigned int x) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amoplo, AMOPLO_X, x); + ctl->dirty.bf.amoplo = 1; + return 0; +} + +static int amixer_set_y(void *blk, unsigned int y) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amoplo, AMOPLO_Y, y); + ctl->dirty.bf.amoplo = 1; + return 0; +} + +static int amixer_set_sadr(void *blk, unsigned int sadr) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amophi, AMOPHI_SADR, sadr); + ctl->dirty.bf.amophi = 1; + return 0; +} + +static int amixer_set_se(void *blk, unsigned int se) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amophi, AMOPHI_SE, se); + ctl->dirty.bf.amophi = 1; + return 0; +} + +static int amixer_set_dirty(void *blk, unsigned int flags) +{ + ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff); + return 0; +} + +static int amixer_set_dirty_all(void *blk) +{ + ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0); + return 0; +} + +static int amixer_commit_write(struct hw *hw, unsigned int idx, void *blk) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + if (ctl->dirty.bf.amoplo || ctl->dirty.bf.amophi) { + hw_write_20kx(hw, AMOPLO+idx*8, ctl->amoplo); + ctl->dirty.bf.amoplo = 0; + hw_write_20kx(hw, AMOPHI+idx*8, ctl->amophi); + ctl->dirty.bf.amophi = 0; + } + + return 0; +} + +static int amixer_get_y(void *blk) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + return get_field(ctl->amoplo, AMOPLO_Y); +} + +static unsigned int amixer_get_dirty(void *blk) +{ + return ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data; +} + +static int amixer_rsc_get_ctrl_blk(void **rblk) +{ + struct amixer_rsc_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int amixer_rsc_put_ctrl_blk(void *blk) +{ + kfree((struct amixer_rsc_ctrl_blk *)blk); + + return 0; +} + +static int amixer_mgr_get_ctrl_blk(void **rblk) +{ + /*amixer_mgr_ctrl_blk_t *blk;*/ + + *rblk = NULL; + /*blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk;*/ + + return 0; +} + +static int amixer_mgr_put_ctrl_blk(void *blk) +{ + /*kfree((amixer_mgr_ctrl_blk_t *)blk);*/ + + return 0; +} + +/* + * DAIO control block definitions. + */ + +/* Receiver Sample Rate Tracker Control register */ +#define SRTCTL_SRCR 0x000000FF +#define SRTCTL_SRCL 0x0000FF00 +#define SRTCTL_RSR 0x00030000 +#define SRTCTL_DRAT 0x000C0000 +#define SRTCTL_RLE 0x10000000 +#define SRTCTL_RLP 0x20000000 +#define SRTCTL_EC 0x40000000 +#define SRTCTL_ET 0x80000000 + +/* DAIO Receiver register dirty flags */ +union dai_dirty { + struct { + u16 srtctl:1; + u16 rsv:15; + } bf; + u16 data; +}; + +/* DAIO Receiver control block */ +struct dai_ctrl_blk { + unsigned int srtctl; + union dai_dirty dirty; +}; + +/* S/PDIF Transmitter register dirty flags */ +union dao_dirty { + struct { + u16 spos:1; + u16 rsv:15; + } bf; + u16 data; +}; + +/* S/PDIF Transmitter control block */ +struct dao_ctrl_blk { + unsigned int spos; /* S/PDIF Output Channel Status Register */ + union dao_dirty dirty; +}; + +/* Audio Input Mapper RAM */ +#define AIM_ARC 0x00000FFF +#define AIM_NXT 0x007F0000 + +struct daoimap { + unsigned int aim; + unsigned int idx; +}; + +/* I2S Transmitter/Receiver Control register */ +#define I2SCTL_EA 0x00000004 +#define I2SCTL_EI 0x00000010 + +/* S/PDIF Transmitter Control register */ +#define SPOCTL_OE 0x00000001 +#define SPOCTL_OS 0x0000000E +#define SPOCTL_RIV 0x00000010 +#define SPOCTL_LIV 0x00000020 +#define SPOCTL_SR 0x000000C0 + +/* S/PDIF Receiver Control register */ +#define SPICTL_EN 0x00000001 +#define SPICTL_I24 0x00000002 +#define SPICTL_IB 0x00000004 +#define SPICTL_SM 0x00000008 +#define SPICTL_VM 0x00000010 + +/* DAIO manager register dirty flags */ +union daio_mgr_dirty { + struct { + u32 i2soctl:4; + u32 i2sictl:4; + u32 spoctl:4; + u32 spictl:4; + u32 daoimap:1; + u32 rsv:15; + } bf; + u32 data; +}; + +/* DAIO manager control block */ +struct daio_mgr_ctrl_blk { + unsigned int i2sctl; + unsigned int spoctl; + unsigned int spictl; + struct daoimap daoimap; + union daio_mgr_dirty dirty; +}; + +static int dai_srt_set_srcr(void *blk, unsigned int src) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srtctl, SRTCTL_SRCR, src); + ctl->dirty.bf.srtctl = 1; + return 0; +} + +static int dai_srt_set_srcl(void *blk, unsigned int src) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srtctl, SRTCTL_SRCL, src); + ctl->dirty.bf.srtctl = 1; + return 0; +} + +static int dai_srt_set_rsr(void *blk, unsigned int rsr) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srtctl, SRTCTL_RSR, rsr); + ctl->dirty.bf.srtctl = 1; + return 0; +} + +static int dai_srt_set_drat(void *blk, unsigned int drat) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srtctl, SRTCTL_DRAT, drat); + ctl->dirty.bf.srtctl = 1; + return 0; +} + +static int dai_srt_set_ec(void *blk, unsigned int ec) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srtctl, SRTCTL_EC, ec ? 1 : 0); + ctl->dirty.bf.srtctl = 1; + return 0; +} + +static int dai_srt_set_et(void *blk, unsigned int et) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srtctl, SRTCTL_ET, et ? 1 : 0); + ctl->dirty.bf.srtctl = 1; + return 0; +} + +static int dai_commit_write(struct hw *hw, unsigned int idx, void *blk) +{ + struct dai_ctrl_blk *ctl = blk; + + if (ctl->dirty.bf.srtctl) { + if (idx < 4) { + /* S/PDIF SRTs */ + hw_write_20kx(hw, SRTSCTL+0x4*idx, ctl->srtctl); + } else { + /* I2S SRT */ + hw_write_20kx(hw, SRTICTL, ctl->srtctl); + } + ctl->dirty.bf.srtctl = 0; + } + + return 0; +} + +static int dai_get_ctrl_blk(void **rblk) +{ + struct dai_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int dai_put_ctrl_blk(void *blk) +{ + kfree((struct dai_ctrl_blk *)blk); + + return 0; +} + +static int dao_set_spos(void *blk, unsigned int spos) +{ + ((struct dao_ctrl_blk *)blk)->spos = spos; + ((struct dao_ctrl_blk *)blk)->dirty.bf.spos = 1; + return 0; +} + +static int dao_commit_write(struct hw *hw, unsigned int idx, void *blk) +{ + struct dao_ctrl_blk *ctl = blk; + + if (ctl->dirty.bf.spos) { + if (idx < 4) { + /* S/PDIF SPOSx */ + hw_write_20kx(hw, SPOS+0x4*idx, ctl->spos); + } + ctl->dirty.bf.spos = 0; + } + + return 0; +} + +static int dao_get_spos(void *blk, unsigned int *spos) +{ + *spos = ((struct dao_ctrl_blk *)blk)->spos; + return 0; +} + +static int dao_get_ctrl_blk(void **rblk) +{ + struct dao_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int dao_put_ctrl_blk(void *blk) +{ + kfree((struct dao_ctrl_blk *)blk); + + return 0; +} + +static int daio_mgr_enb_dai(void *blk, unsigned int idx) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + if (idx < 4) { + /* S/PDIF input */ + set_field(&ctl->spictl, SPICTL_EN << (idx*8), 1); + ctl->dirty.bf.spictl |= (0x1 << idx); + } else { + /* I2S input */ + idx %= 4; + set_field(&ctl->i2sctl, I2SCTL_EI << (idx*8), 1); + ctl->dirty.bf.i2sictl |= (0x1 << idx); + } + return 0; +} + +static int daio_mgr_dsb_dai(void *blk, unsigned int idx) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + if (idx < 4) { + /* S/PDIF input */ + set_field(&ctl->spictl, SPICTL_EN << (idx*8), 0); + ctl->dirty.bf.spictl |= (0x1 << idx); + } else { + /* I2S input */ + idx %= 4; + set_field(&ctl->i2sctl, I2SCTL_EI << (idx*8), 0); + ctl->dirty.bf.i2sictl |= (0x1 << idx); + } + return 0; +} + +static int daio_mgr_enb_dao(void *blk, unsigned int idx) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + if (idx < 4) { + /* S/PDIF output */ + set_field(&ctl->spoctl, SPOCTL_OE << (idx*8), 1); + ctl->dirty.bf.spoctl |= (0x1 << idx); + } else { + /* I2S output */ + idx %= 4; + set_field(&ctl->i2sctl, I2SCTL_EA << (idx*8), 1); + ctl->dirty.bf.i2soctl |= (0x1 << idx); + } + return 0; +} + +static int daio_mgr_dsb_dao(void *blk, unsigned int idx) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + if (idx < 4) { + /* S/PDIF output */ + set_field(&ctl->spoctl, SPOCTL_OE << (idx*8), 0); + ctl->dirty.bf.spoctl |= (0x1 << idx); + } else { + /* I2S output */ + idx %= 4; + set_field(&ctl->i2sctl, I2SCTL_EA << (idx*8), 0); + ctl->dirty.bf.i2soctl |= (0x1 << idx); + } + return 0; +} + +static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + if (idx < 4) { + /* S/PDIF output */ + switch ((conf & 0x7)) { + case 0: + set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 3); + break; /* CDIF */ + case 1: + set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 0); + break; + case 2: + set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 1); + break; + case 4: + set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 2); + break; + default: + break; + } + set_field(&ctl->spoctl, SPOCTL_LIV << (idx*8), + (conf >> 4) & 0x1); /* Non-audio */ + set_field(&ctl->spoctl, SPOCTL_RIV << (idx*8), + (conf >> 4) & 0x1); /* Non-audio */ + set_field(&ctl->spoctl, SPOCTL_OS << (idx*8), + ((conf >> 3) & 0x1) ? 2 : 2); /* Raw */ + + ctl->dirty.bf.spoctl |= (0x1 << idx); + } else { + /* I2S output */ + /*idx %= 4; */ + } + return 0; +} + +static int daio_mgr_set_imaparc(void *blk, unsigned int slot) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->daoimap.aim, AIM_ARC, slot); + ctl->dirty.bf.daoimap = 1; + return 0; +} + +static int daio_mgr_set_imapnxt(void *blk, unsigned int next) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->daoimap.aim, AIM_NXT, next); + ctl->dirty.bf.daoimap = 1; + return 0; +} + +static int daio_mgr_set_imapaddr(void *blk, unsigned int addr) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + ctl->daoimap.idx = addr; + ctl->dirty.bf.daoimap = 1; + return 0; +} + +static int daio_mgr_commit_write(struct hw *hw, void *blk) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + int i; + + if (ctl->dirty.bf.i2sictl || ctl->dirty.bf.i2soctl) { + for (i = 0; i < 4; i++) { + if ((ctl->dirty.bf.i2sictl & (0x1 << i))) + ctl->dirty.bf.i2sictl &= ~(0x1 << i); + + if ((ctl->dirty.bf.i2soctl & (0x1 << i))) + ctl->dirty.bf.i2soctl &= ~(0x1 << i); + } + hw_write_20kx(hw, I2SCTL, ctl->i2sctl); + mdelay(1); + } + if (ctl->dirty.bf.spoctl) { + for (i = 0; i < 4; i++) { + if ((ctl->dirty.bf.spoctl & (0x1 << i))) + ctl->dirty.bf.spoctl &= ~(0x1 << i); + } + hw_write_20kx(hw, SPOCTL, ctl->spoctl); + mdelay(1); + } + if (ctl->dirty.bf.spictl) { + for (i = 0; i < 4; i++) { + if ((ctl->dirty.bf.spictl & (0x1 << i))) + ctl->dirty.bf.spictl &= ~(0x1 << i); + } + hw_write_20kx(hw, SPICTL, ctl->spictl); + mdelay(1); + } + if (ctl->dirty.bf.daoimap) { + hw_write_20kx(hw, DAOIMAP+ctl->daoimap.idx*4, + ctl->daoimap.aim); + ctl->dirty.bf.daoimap = 0; + } + + return 0; +} + +static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk) +{ + struct daio_mgr_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + blk->i2sctl = hw_read_20kx(hw, I2SCTL); + blk->spoctl = hw_read_20kx(hw, SPOCTL); + blk->spictl = hw_read_20kx(hw, SPICTL); + + *rblk = blk; + + return 0; +} + +static int daio_mgr_put_ctrl_blk(void *blk) +{ + kfree((struct daio_mgr_ctrl_blk *)blk); + + return 0; +} + +/* Timer interrupt */ +static int set_timer_irq(struct hw *hw, int enable) +{ + hw_write_20kx(hw, GIE, enable ? IT_INT : 0); + return 0; +} + +static int set_timer_tick(struct hw *hw, unsigned int ticks) +{ + if (ticks) + ticks |= TIMR_IE | TIMR_IP; + hw_write_20kx(hw, TIMR, ticks); + return 0; +} + +static unsigned int get_wc(struct hw *hw) +{ + return hw_read_20kx(hw, WC); +} + +/* Card hardware initialization block */ +struct dac_conf { + unsigned int msr; /* master sample rate in rsrs */ +}; + +struct adc_conf { + unsigned int msr; /* master sample rate in rsrs */ + unsigned char input; /* the input source of ADC */ + unsigned char mic20db; /* boost mic by 20db if input is microphone */ +}; + +struct daio_conf { + unsigned int msr; /* master sample rate in rsrs */ +}; + +struct trn_conf { + unsigned long vm_pgt_phys; +}; + +static int hw_daio_init(struct hw *hw, const struct daio_conf *info) +{ + u32 i2sorg; + u32 spdorg; + + /* Read I2S CTL. Keep original value. */ + /*i2sorg = hw_read_20kx(hw, I2SCTL);*/ + i2sorg = 0x94040404; /* enable all audio out and I2S-D input */ + /* Program I2S with proper master sample rate and enable + * the correct I2S channel. */ + i2sorg &= 0xfffffffc; + + /* Enable S/PDIF-out-A in fixed 24-bit data + * format and default to 48kHz. */ + /* Disable all before doing any changes. */ + hw_write_20kx(hw, SPOCTL, 0x0); + spdorg = 0x05; + + switch (info->msr) { + case 1: + i2sorg |= 1; + spdorg |= (0x0 << 6); + break; + case 2: + i2sorg |= 2; + spdorg |= (0x1 << 6); + break; + case 4: + i2sorg |= 3; + spdorg |= (0x2 << 6); + break; + default: + i2sorg |= 1; + break; + } + + hw_write_20kx(hw, I2SCTL, i2sorg); + hw_write_20kx(hw, SPOCTL, spdorg); + + /* Enable S/PDIF-in-A in fixed 24-bit data format. */ + /* Disable all before doing any changes. */ + hw_write_20kx(hw, SPICTL, 0x0); + mdelay(1); + spdorg = 0x0a0a0a0a; + hw_write_20kx(hw, SPICTL, spdorg); + mdelay(1); + + return 0; +} + +/* TRANSPORT operations */ +static int hw_trn_init(struct hw *hw, const struct trn_conf *info) +{ + u32 trnctl; + u32 ptp_phys_low, ptp_phys_high; + + /* Set up device page table */ + if ((~0UL) == info->vm_pgt_phys) { + printk(KERN_ERR "Wrong device page table page address!\n"); + return -1; + } + + trnctl = 0x13; /* 32-bit, 4k-size page */ + ptp_phys_low = (u32)info->vm_pgt_phys; + ptp_phys_high = upper_32_bits(info->vm_pgt_phys); + if (sizeof(void *) == 8) /* 64bit address */ + trnctl |= (1 << 2); +#if 0 /* Only 4k h/w pages for simplicitiy */ +#if PAGE_SIZE == 8192 + trnctl |= (1<<5); +#endif +#endif + hw_write_20kx(hw, PTPALX, ptp_phys_low); + hw_write_20kx(hw, PTPAHX, ptp_phys_high); + hw_write_20kx(hw, TRNCTL, trnctl); + hw_write_20kx(hw, TRNIS, 0x200c01); /* realy needed? */ + + return 0; +} + +/* Card initialization */ +#define GCTL_EAC 0x00000001 +#define GCTL_EAI 0x00000002 +#define GCTL_BEP 0x00000004 +#define GCTL_BES 0x00000008 +#define GCTL_DSP 0x00000010 +#define GCTL_DBP 0x00000020 +#define GCTL_ABP 0x00000040 +#define GCTL_TBP 0x00000080 +#define GCTL_SBP 0x00000100 +#define GCTL_FBP 0x00000200 +#define GCTL_XA 0x00000400 +#define GCTL_ET 0x00000800 +#define GCTL_PR 0x00001000 +#define GCTL_MRL 0x00002000 +#define GCTL_SDE 0x00004000 +#define GCTL_SDI 0x00008000 +#define GCTL_SM 0x00010000 +#define GCTL_SR 0x00020000 +#define GCTL_SD 0x00040000 +#define GCTL_SE 0x00080000 +#define GCTL_AID 0x00100000 + +static int hw_pll_init(struct hw *hw, unsigned int rsr) +{ + unsigned int pllctl; + int i; + + pllctl = (48000 == rsr) ? 0x1480a001 : 0x1480a731; + for (i = 0; i < 3; i++) { + if (hw_read_20kx(hw, PLLCTL) == pllctl) + break; + + hw_write_20kx(hw, PLLCTL, pllctl); + mdelay(40); + } + if (i >= 3) { + printk(KERN_ALERT "PLL initialization failed!!!\n"); + return -EBUSY; + } + + return 0; +} + +static int hw_auto_init(struct hw *hw) +{ + unsigned int gctl; + int i; + + gctl = hw_read_20kx(hw, GCTL); + set_field(&gctl, GCTL_EAI, 0); + hw_write_20kx(hw, GCTL, gctl); + set_field(&gctl, GCTL_EAI, 1); + hw_write_20kx(hw, GCTL, gctl); + mdelay(10); + for (i = 0; i < 400000; i++) { + gctl = hw_read_20kx(hw, GCTL); + if (get_field(gctl, GCTL_AID)) + break; + } + if (!get_field(gctl, GCTL_AID)) { + printk(KERN_ALERT "Card Auto-init failed!!!\n"); + return -EBUSY; + } + + return 0; +} + +static int i2c_unlock(struct hw *hw) +{ + if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa) + return 0; + + hw_write_pci(hw, 0xcc, 0x8c); + hw_write_pci(hw, 0xcc, 0x0e); + if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa) + return 0; + + hw_write_pci(hw, 0xcc, 0xee); + hw_write_pci(hw, 0xcc, 0xaa); + if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa) + return 0; + + return -1; +} + +static void i2c_lock(struct hw *hw) +{ + if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa) + hw_write_pci(hw, 0xcc, 0x00); +} + +static void i2c_write(struct hw *hw, u32 device, u32 addr, u32 data) +{ + unsigned int ret; + + do { + ret = hw_read_pci(hw, 0xEC); + } while (!(ret & 0x800000)); + hw_write_pci(hw, 0xE0, device); + hw_write_pci(hw, 0xE4, (data << 8) | (addr & 0xff)); +} + +/* DAC operations */ + +static int hw_reset_dac(struct hw *hw) +{ + u32 i; + u16 gpioorg; + unsigned int ret; + + if (i2c_unlock(hw)) + return -1; + + do { + ret = hw_read_pci(hw, 0xEC); + } while (!(ret & 0x800000)); + hw_write_pci(hw, 0xEC, 0x05); /* write to i2c status control */ + + /* To be effective, need to reset the DAC twice. */ + for (i = 0; i < 2; i++) { + /* set gpio */ + mdelay(100); + gpioorg = (u16)hw_read_20kx(hw, GPIO); + gpioorg &= 0xfffd; + hw_write_20kx(hw, GPIO, gpioorg); + mdelay(1); + hw_write_20kx(hw, GPIO, gpioorg | 0x2); + } + + i2c_write(hw, 0x00180080, 0x01, 0x80); + i2c_write(hw, 0x00180080, 0x02, 0x10); + + i2c_lock(hw); + + return 0; +} + +static int hw_dac_init(struct hw *hw, const struct dac_conf *info) +{ + u32 data; + u16 gpioorg; + unsigned int ret; + + if (hw->model == CTSB055X) { + /* SB055x, unmute outputs */ + gpioorg = (u16)hw_read_20kx(hw, GPIO); + gpioorg &= 0xffbf; /* set GPIO6 to low */ + gpioorg |= 2; /* set GPIO1 to high */ + hw_write_20kx(hw, GPIO, gpioorg); + return 0; + } + + /* mute outputs */ + gpioorg = (u16)hw_read_20kx(hw, GPIO); + gpioorg &= 0xffbf; + hw_write_20kx(hw, GPIO, gpioorg); + + hw_reset_dac(hw); + + if (i2c_unlock(hw)) + return -1; + + hw_write_pci(hw, 0xEC, 0x05); /* write to i2c status control */ + do { + ret = hw_read_pci(hw, 0xEC); + } while (!(ret & 0x800000)); + + switch (info->msr) { + case 1: + data = 0x24; + break; + case 2: + data = 0x25; + break; + case 4: + data = 0x26; + break; + default: + data = 0x24; + break; + } + + i2c_write(hw, 0x00180080, 0x06, data); + i2c_write(hw, 0x00180080, 0x09, data); + i2c_write(hw, 0x00180080, 0x0c, data); + i2c_write(hw, 0x00180080, 0x0f, data); + + i2c_lock(hw); + + /* unmute outputs */ + gpioorg = (u16)hw_read_20kx(hw, GPIO); + gpioorg = gpioorg | 0x40; + hw_write_20kx(hw, GPIO, gpioorg); + + return 0; +} + +/* ADC operations */ + +static int is_adc_input_selected_SB055x(struct hw *hw, enum ADCSRC type) +{ + return 0; +} + +static int is_adc_input_selected_SBx(struct hw *hw, enum ADCSRC type) +{ + u32 data; + + data = hw_read_20kx(hw, GPIO); + switch (type) { + case ADC_MICIN: + data = ((data & (0x1<<7)) && (data & (0x1<<8))); + break; + case ADC_LINEIN: + data = (!(data & (0x1<<7)) && (data & (0x1<<8))); + break; + case ADC_NONE: /* Digital I/O */ + data = (!(data & (0x1<<8))); + break; + default: + data = 0; + } + return data; +} + +static int is_adc_input_selected_hendrix(struct hw *hw, enum ADCSRC type) +{ + u32 data; + + data = hw_read_20kx(hw, GPIO); + switch (type) { + case ADC_MICIN: + data = (data & (0x1 << 7)) ? 1 : 0; + break; + case ADC_LINEIN: + data = (data & (0x1 << 7)) ? 0 : 1; + break; + default: + data = 0; + } + return data; +} + +static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type) +{ + switch (hw->model) { + case CTSB055X: + return is_adc_input_selected_SB055x(hw, type); + case CTSB073X: + return is_adc_input_selected_hendrix(hw, type); + case CTUAA: + return is_adc_input_selected_hendrix(hw, type); + default: + return is_adc_input_selected_SBx(hw, type); + } +} + +static int +adc_input_select_SB055x(struct hw *hw, enum ADCSRC type, unsigned char boost) +{ + u32 data; + + /* + * check and set the following GPIO bits accordingly + * ADC_Gain = GPIO2 + * DRM_off = GPIO3 + * Mic_Pwr_on = GPIO7 + * Digital_IO_Sel = GPIO8 + * Mic_Sw = GPIO9 + * Aux/MicLine_Sw = GPIO12 + */ + data = hw_read_20kx(hw, GPIO); + data &= 0xec73; + switch (type) { + case ADC_MICIN: + data |= (0x1<<7) | (0x1<<8) | (0x1<<9) ; + data |= boost ? (0x1<<2) : 0; + break; + case ADC_LINEIN: + data |= (0x1<<8); + break; + case ADC_AUX: + data |= (0x1<<8) | (0x1<<12); + break; + case ADC_NONE: + data |= (0x1<<12); /* set to digital */ + break; + default: + return -1; + } + + hw_write_20kx(hw, GPIO, data); + + return 0; +} + + +static int +adc_input_select_SBx(struct hw *hw, enum ADCSRC type, unsigned char boost) +{ + u32 data; + u32 i2c_data; + unsigned int ret; + + if (i2c_unlock(hw)) + return -1; + + do { + ret = hw_read_pci(hw, 0xEC); + } while (!(ret & 0x800000)); /* i2c ready poll */ + /* set i2c access mode as Direct Control */ + hw_write_pci(hw, 0xEC, 0x05); + + data = hw_read_20kx(hw, GPIO); + switch (type) { + case ADC_MICIN: + data |= ((0x1 << 7) | (0x1 << 8)); + i2c_data = 0x1; /* Mic-in */ + break; + case ADC_LINEIN: + data &= ~(0x1 << 7); + data |= (0x1 << 8); + i2c_data = 0x2; /* Line-in */ + break; + case ADC_NONE: + data &= ~(0x1 << 8); + i2c_data = 0x0; /* set to Digital */ + break; + default: + i2c_lock(hw); + return -1; + } + hw_write_20kx(hw, GPIO, data); + i2c_write(hw, 0x001a0080, 0x2a, i2c_data); + if (boost) { + i2c_write(hw, 0x001a0080, 0x1c, 0xe7); /* +12dB boost */ + i2c_write(hw, 0x001a0080, 0x1e, 0xe7); /* +12dB boost */ + } else { + i2c_write(hw, 0x001a0080, 0x1c, 0xcf); /* No boost */ + i2c_write(hw, 0x001a0080, 0x1e, 0xcf); /* No boost */ + } + + i2c_lock(hw); + + return 0; +} + +static int +adc_input_select_hendrix(struct hw *hw, enum ADCSRC type, unsigned char boost) +{ + u32 data; + u32 i2c_data; + unsigned int ret; + + if (i2c_unlock(hw)) + return -1; + + do { + ret = hw_read_pci(hw, 0xEC); + } while (!(ret & 0x800000)); /* i2c ready poll */ + /* set i2c access mode as Direct Control */ + hw_write_pci(hw, 0xEC, 0x05); + + data = hw_read_20kx(hw, GPIO); + switch (type) { + case ADC_MICIN: + data |= (0x1 << 7); + i2c_data = 0x1; /* Mic-in */ + break; + case ADC_LINEIN: + data &= ~(0x1 << 7); + i2c_data = 0x2; /* Line-in */ + break; + default: + i2c_lock(hw); + return -1; + } + hw_write_20kx(hw, GPIO, data); + i2c_write(hw, 0x001a0080, 0x2a, i2c_data); + if (boost) { + i2c_write(hw, 0x001a0080, 0x1c, 0xe7); /* +12dB boost */ + i2c_write(hw, 0x001a0080, 0x1e, 0xe7); /* +12dB boost */ + } else { + i2c_write(hw, 0x001a0080, 0x1c, 0xcf); /* No boost */ + i2c_write(hw, 0x001a0080, 0x1e, 0xcf); /* No boost */ + } + + i2c_lock(hw); + + return 0; +} + +static int hw_adc_input_select(struct hw *hw, enum ADCSRC type) +{ + int state = type == ADC_MICIN; + + switch (hw->model) { + case CTSB055X: + return adc_input_select_SB055x(hw, type, state); + case CTSB073X: + return adc_input_select_hendrix(hw, type, state); + case CTUAA: + return adc_input_select_hendrix(hw, type, state); + default: + return adc_input_select_SBx(hw, type, state); + } +} + +static int adc_init_SB055x(struct hw *hw, int input, int mic20db) +{ + return adc_input_select_SB055x(hw, input, mic20db); +} + +static int adc_init_SBx(struct hw *hw, int input, int mic20db) +{ + u16 gpioorg; + u16 input_source; + u32 adcdata; + unsigned int ret; + + input_source = 0x100; /* default to analog */ + switch (input) { + case ADC_MICIN: + adcdata = 0x1; + input_source = 0x180; /* set GPIO7 to select Mic */ + break; + case ADC_LINEIN: + adcdata = 0x2; + break; + case ADC_VIDEO: + adcdata = 0x4; + break; + case ADC_AUX: + adcdata = 0x8; + break; + case ADC_NONE: + adcdata = 0x0; + input_source = 0x0; /* set to Digital */ + break; + default: + adcdata = 0x0; + break; + } + + if (i2c_unlock(hw)) + return -1; + + do { + ret = hw_read_pci(hw, 0xEC); + } while (!(ret & 0x800000)); /* i2c ready poll */ + hw_write_pci(hw, 0xEC, 0x05); /* write to i2c status control */ + + i2c_write(hw, 0x001a0080, 0x0e, 0x08); + i2c_write(hw, 0x001a0080, 0x18, 0x0a); + i2c_write(hw, 0x001a0080, 0x28, 0x86); + i2c_write(hw, 0x001a0080, 0x2a, adcdata); + + if (mic20db) { + i2c_write(hw, 0x001a0080, 0x1c, 0xf7); + i2c_write(hw, 0x001a0080, 0x1e, 0xf7); + } else { + i2c_write(hw, 0x001a0080, 0x1c, 0xcf); + i2c_write(hw, 0x001a0080, 0x1e, 0xcf); + } + + if (!(hw_read_20kx(hw, ID0) & 0x100)) + i2c_write(hw, 0x001a0080, 0x16, 0x26); + + i2c_lock(hw); + + gpioorg = (u16)hw_read_20kx(hw, GPIO); + gpioorg &= 0xfe7f; + gpioorg |= input_source; + hw_write_20kx(hw, GPIO, gpioorg); + + return 0; +} + +static int hw_adc_init(struct hw *hw, const struct adc_conf *info) +{ + if (hw->model == CTSB055X) + return adc_init_SB055x(hw, info->input, info->mic20db); + else + return adc_init_SBx(hw, info->input, info->mic20db); +} + +static int hw_have_digit_io_switch(struct hw *hw) +{ + /* SB073x and Vista compatible cards have no digit IO switch */ + return !(hw->model == CTSB073X || hw->model == CTUAA); +} + +#define CTLBITS(a, b, c, d) (((a) << 24) | ((b) << 16) | ((c) << 8) | (d)) + +#define UAA_CFG_PWRSTATUS 0x44 +#define UAA_CFG_SPACE_FLAG 0xA0 +#define UAA_CORE_CHANGE 0x3FFC +static int uaa_to_xfi(struct pci_dev *pci) +{ + unsigned int bar0, bar1, bar2, bar3, bar4, bar5; + unsigned int cmd, irq, cl_size, l_timer, pwr; + unsigned int is_uaa; + unsigned int data[4] = {0}; + unsigned int io_base; + void *mem_base; + int i; + const u32 CTLX = CTLBITS('C', 'T', 'L', 'X'); + const u32 CTL_ = CTLBITS('C', 'T', 'L', '-'); + const u32 CTLF = CTLBITS('C', 'T', 'L', 'F'); + const u32 CTLi = CTLBITS('C', 'T', 'L', 'i'); + const u32 CTLA = CTLBITS('C', 'T', 'L', 'A'); + const u32 CTLZ = CTLBITS('C', 'T', 'L', 'Z'); + const u32 CTLL = CTLBITS('C', 'T', 'L', 'L'); + + /* By default, Hendrix card UAA Bar0 should be using memory... */ + io_base = pci_resource_start(pci, 0); + mem_base = ioremap(io_base, pci_resource_len(pci, 0)); + if (NULL == mem_base) + return -ENOENT; + + /* Read current mode from Mode Change Register */ + for (i = 0; i < 4; i++) + data[i] = readl(mem_base + UAA_CORE_CHANGE); + + /* Determine current mode... */ + if (data[0] == CTLA) { + is_uaa = ((data[1] == CTLZ && data[2] == CTLL + && data[3] == CTLA) || (data[1] == CTLA + && data[2] == CTLZ && data[3] == CTLL)); + } else if (data[0] == CTLZ) { + is_uaa = (data[1] == CTLL + && data[2] == CTLA && data[3] == CTLA); + } else if (data[0] == CTLL) { + is_uaa = (data[1] == CTLA + && data[2] == CTLA && data[3] == CTLZ); + } else { + is_uaa = 0; + } + + if (!is_uaa) { + /* Not in UAA mode currently. Return directly. */ + iounmap(mem_base); + return 0; + } + + pci_read_config_dword(pci, PCI_BASE_ADDRESS_0, &bar0); + pci_read_config_dword(pci, PCI_BASE_ADDRESS_1, &bar1); + pci_read_config_dword(pci, PCI_BASE_ADDRESS_2, &bar2); + pci_read_config_dword(pci, PCI_BASE_ADDRESS_3, &bar3); + pci_read_config_dword(pci, PCI_BASE_ADDRESS_4, &bar4); + pci_read_config_dword(pci, PCI_BASE_ADDRESS_5, &bar5); + pci_read_config_dword(pci, PCI_INTERRUPT_LINE, &irq); + pci_read_config_dword(pci, PCI_CACHE_LINE_SIZE, &cl_size); + pci_read_config_dword(pci, PCI_LATENCY_TIMER, &l_timer); + pci_read_config_dword(pci, UAA_CFG_PWRSTATUS, &pwr); + pci_read_config_dword(pci, PCI_COMMAND, &cmd); + + /* Set up X-Fi core PCI configuration space. */ + /* Switch to X-Fi config space with BAR0 exposed. */ + pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x87654321); + /* Copy UAA's BAR5 into X-Fi BAR0 */ + pci_write_config_dword(pci, PCI_BASE_ADDRESS_0, bar5); + /* Switch to X-Fi config space without BAR0 exposed. */ + pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x12345678); + pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, bar1); + pci_write_config_dword(pci, PCI_BASE_ADDRESS_2, bar2); + pci_write_config_dword(pci, PCI_BASE_ADDRESS_3, bar3); + pci_write_config_dword(pci, PCI_BASE_ADDRESS_4, bar4); + pci_write_config_dword(pci, PCI_INTERRUPT_LINE, irq); + pci_write_config_dword(pci, PCI_CACHE_LINE_SIZE, cl_size); + pci_write_config_dword(pci, PCI_LATENCY_TIMER, l_timer); + pci_write_config_dword(pci, UAA_CFG_PWRSTATUS, pwr); + pci_write_config_dword(pci, PCI_COMMAND, cmd); + + /* Switch to X-Fi mode */ + writel(CTLX, (mem_base + UAA_CORE_CHANGE)); + writel(CTL_, (mem_base + UAA_CORE_CHANGE)); + writel(CTLF, (mem_base + UAA_CORE_CHANGE)); + writel(CTLi, (mem_base + UAA_CORE_CHANGE)); + + iounmap(mem_base); + + return 0; +} + +static irqreturn_t ct_20k1_interrupt(int irq, void *dev_id) +{ + struct hw *hw = dev_id; + unsigned int status; + + status = hw_read_20kx(hw, GIP); + if (!status) + return IRQ_NONE; + + if (hw->irq_callback) + hw->irq_callback(hw->irq_callback_data, status); + + hw_write_20kx(hw, GIP, status); + return IRQ_HANDLED; +} + +static int hw_card_start(struct hw *hw) +{ + int err; + struct pci_dev *pci = hw->pci; + + err = pci_enable_device(pci); + if (err < 0) + return err; + + /* Set DMA transfer mask */ + if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 || + pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) { + printk(KERN_ERR "architecture does not support PCI " + "busmaster DMA with mask 0x%llx\n", + CT_XFI_DMA_MASK); + err = -ENXIO; + goto error1; + } + + err = pci_request_regions(pci, "XFi"); + if (err < 0) + goto error1; + + /* Switch to X-Fi mode from UAA mode if neeeded */ + if (hw->model == CTUAA) { + err = uaa_to_xfi(pci); + if (err) + goto error2; + + hw->io_base = pci_resource_start(pci, 5); + } else { + hw->io_base = pci_resource_start(pci, 0); + } + + err = request_irq(pci->irq, ct_20k1_interrupt, IRQF_SHARED, + "ctxfi", hw); + if (err < 0) { + printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq); + goto error2; + } + hw->irq = pci->irq; + + pci_set_master(pci); + + return 0; + +error2: + pci_release_regions(pci); + hw->io_base = 0; +error1: + pci_disable_device(pci); + return err; +} + +static int hw_card_stop(struct hw *hw) +{ + /* TODO: Disable interrupt and so on... */ + if (hw->irq >= 0) + synchronize_irq(hw->irq); + return 0; +} + +static int hw_card_shutdown(struct hw *hw) +{ + if (hw->irq >= 0) + free_irq(hw->irq, hw); + + hw->irq = -1; + + if (NULL != ((void *)hw->mem_base)) + iounmap((void *)hw->mem_base); + + hw->mem_base = (unsigned long)NULL; + + if (hw->io_base) + pci_release_regions(hw->pci); + + hw->io_base = 0; + + pci_disable_device(hw->pci); + + return 0; +} + +static int hw_card_init(struct hw *hw, struct card_conf *info) +{ + int err; + unsigned int gctl; + u32 data; + struct dac_conf dac_info = {0}; + struct adc_conf adc_info = {0}; + struct daio_conf daio_info = {0}; + struct trn_conf trn_info = {0}; + + /* Get PCI io port base address and do Hendrix switch if needed. */ + if (!hw->io_base) { + err = hw_card_start(hw); + if (err) + return err; + } + + /* PLL init */ + err = hw_pll_init(hw, info->rsr); + if (err < 0) + return err; + + /* kick off auto-init */ + err = hw_auto_init(hw); + if (err < 0) + return err; + + /* Enable audio ring */ + gctl = hw_read_20kx(hw, GCTL); + set_field(&gctl, GCTL_EAC, 1); + set_field(&gctl, GCTL_DBP, 1); + set_field(&gctl, GCTL_TBP, 1); + set_field(&gctl, GCTL_FBP, 1); + set_field(&gctl, GCTL_ET, 1); + hw_write_20kx(hw, GCTL, gctl); + mdelay(10); + + /* Reset all global pending interrupts */ + hw_write_20kx(hw, GIE, 0); + /* Reset all SRC pending interrupts */ + hw_write_20kx(hw, SRCIP, 0); + mdelay(30); + + /* Detect the card ID and configure GPIO accordingly. */ + switch (hw->model) { + case CTSB055X: + hw_write_20kx(hw, GPIOCTL, 0x13fe); + break; + case CTSB073X: + hw_write_20kx(hw, GPIOCTL, 0x00e6); + break; + case CTUAA: + hw_write_20kx(hw, GPIOCTL, 0x00c2); + break; + default: + hw_write_20kx(hw, GPIOCTL, 0x01e6); + break; + } + + trn_info.vm_pgt_phys = info->vm_pgt_phys; + err = hw_trn_init(hw, &trn_info); + if (err < 0) + return err; + + daio_info.msr = info->msr; + err = hw_daio_init(hw, &daio_info); + if (err < 0) + return err; + + dac_info.msr = info->msr; + err = hw_dac_init(hw, &dac_info); + if (err < 0) + return err; + + adc_info.msr = info->msr; + adc_info.input = ADC_LINEIN; + adc_info.mic20db = 0; + err = hw_adc_init(hw, &adc_info); + if (err < 0) + return err; + + data = hw_read_20kx(hw, SRCMCTL); + data |= 0x1; /* Enables input from the audio ring */ + hw_write_20kx(hw, SRCMCTL, data); + + return 0; +} + +static u32 hw_read_20kx(struct hw *hw, u32 reg) +{ + u32 value; + unsigned long flags; + + spin_lock_irqsave( + &container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags); + outl(reg, hw->io_base + 0x0); + value = inl(hw->io_base + 0x4); + spin_unlock_irqrestore( + &container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags); + + return value; +} + +static void hw_write_20kx(struct hw *hw, u32 reg, u32 data) +{ + unsigned long flags; + + spin_lock_irqsave( + &container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags); + outl(reg, hw->io_base + 0x0); + outl(data, hw->io_base + 0x4); + spin_unlock_irqrestore( + &container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags); + +} + +static u32 hw_read_pci(struct hw *hw, u32 reg) +{ + u32 value; + unsigned long flags; + + spin_lock_irqsave( + &container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags); + outl(reg, hw->io_base + 0x10); + value = inl(hw->io_base + 0x14); + spin_unlock_irqrestore( + &container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags); + + return value; +} + +static void hw_write_pci(struct hw *hw, u32 reg, u32 data) +{ + unsigned long flags; + + spin_lock_irqsave( + &container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags); + outl(reg, hw->io_base + 0x10); + outl(data, hw->io_base + 0x14); + spin_unlock_irqrestore( + &container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags); +} + +static struct hw ct20k1_preset __devinitdata = { + .irq = -1, + + .card_init = hw_card_init, + .card_stop = hw_card_stop, + .pll_init = hw_pll_init, + .is_adc_source_selected = hw_is_adc_input_selected, + .select_adc_source = hw_adc_input_select, + .have_digit_io_switch = hw_have_digit_io_switch, + + .src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk, + .src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk, + .src_mgr_get_ctrl_blk = src_mgr_get_ctrl_blk, + .src_mgr_put_ctrl_blk = src_mgr_put_ctrl_blk, + .src_set_state = src_set_state, + .src_set_bm = src_set_bm, + .src_set_rsr = src_set_rsr, + .src_set_sf = src_set_sf, + .src_set_wr = src_set_wr, + .src_set_pm = src_set_pm, + .src_set_rom = src_set_rom, + .src_set_vo = src_set_vo, + .src_set_st = src_set_st, + .src_set_ie = src_set_ie, + .src_set_ilsz = src_set_ilsz, + .src_set_bp = src_set_bp, + .src_set_cisz = src_set_cisz, + .src_set_ca = src_set_ca, + .src_set_sa = src_set_sa, + .src_set_la = src_set_la, + .src_set_pitch = src_set_pitch, + .src_set_dirty = src_set_dirty, + .src_set_clear_zbufs = src_set_clear_zbufs, + .src_set_dirty_all = src_set_dirty_all, + .src_commit_write = src_commit_write, + .src_get_ca = src_get_ca, + .src_get_dirty = src_get_dirty, + .src_dirty_conj_mask = src_dirty_conj_mask, + .src_mgr_enbs_src = src_mgr_enbs_src, + .src_mgr_enb_src = src_mgr_enb_src, + .src_mgr_dsb_src = src_mgr_dsb_src, + .src_mgr_commit_write = src_mgr_commit_write, + + .srcimp_mgr_get_ctrl_blk = srcimp_mgr_get_ctrl_blk, + .srcimp_mgr_put_ctrl_blk = srcimp_mgr_put_ctrl_blk, + .srcimp_mgr_set_imaparc = srcimp_mgr_set_imaparc, + .srcimp_mgr_set_imapuser = srcimp_mgr_set_imapuser, + .srcimp_mgr_set_imapnxt = srcimp_mgr_set_imapnxt, + .srcimp_mgr_set_imapaddr = srcimp_mgr_set_imapaddr, + .srcimp_mgr_commit_write = srcimp_mgr_commit_write, + + .amixer_rsc_get_ctrl_blk = amixer_rsc_get_ctrl_blk, + .amixer_rsc_put_ctrl_blk = amixer_rsc_put_ctrl_blk, + .amixer_mgr_get_ctrl_blk = amixer_mgr_get_ctrl_blk, + .amixer_mgr_put_ctrl_blk = amixer_mgr_put_ctrl_blk, + .amixer_set_mode = amixer_set_mode, + .amixer_set_iv = amixer_set_iv, + .amixer_set_x = amixer_set_x, + .amixer_set_y = amixer_set_y, + .amixer_set_sadr = amixer_set_sadr, + .amixer_set_se = amixer_set_se, + .amixer_set_dirty = amixer_set_dirty, + .amixer_set_dirty_all = amixer_set_dirty_all, + .amixer_commit_write = amixer_commit_write, + .amixer_get_y = amixer_get_y, + .amixer_get_dirty = amixer_get_dirty, + + .dai_get_ctrl_blk = dai_get_ctrl_blk, + .dai_put_ctrl_blk = dai_put_ctrl_blk, + .dai_srt_set_srco = dai_srt_set_srcr, + .dai_srt_set_srcm = dai_srt_set_srcl, + .dai_srt_set_rsr = dai_srt_set_rsr, + .dai_srt_set_drat = dai_srt_set_drat, + .dai_srt_set_ec = dai_srt_set_ec, + .dai_srt_set_et = dai_srt_set_et, + .dai_commit_write = dai_commit_write, + + .dao_get_ctrl_blk = dao_get_ctrl_blk, + .dao_put_ctrl_blk = dao_put_ctrl_blk, + .dao_set_spos = dao_set_spos, + .dao_commit_write = dao_commit_write, + .dao_get_spos = dao_get_spos, + + .daio_mgr_get_ctrl_blk = daio_mgr_get_ctrl_blk, + .daio_mgr_put_ctrl_blk = daio_mgr_put_ctrl_blk, + .daio_mgr_enb_dai = daio_mgr_enb_dai, + .daio_mgr_dsb_dai = daio_mgr_dsb_dai, + .daio_mgr_enb_dao = daio_mgr_enb_dao, + .daio_mgr_dsb_dao = daio_mgr_dsb_dao, + .daio_mgr_dao_init = daio_mgr_dao_init, + .daio_mgr_set_imaparc = daio_mgr_set_imaparc, + .daio_mgr_set_imapnxt = daio_mgr_set_imapnxt, + .daio_mgr_set_imapaddr = daio_mgr_set_imapaddr, + .daio_mgr_commit_write = daio_mgr_commit_write, + + .set_timer_irq = set_timer_irq, + .set_timer_tick = set_timer_tick, + .get_wc = get_wc, +}; + +int __devinit create_20k1_hw_obj(struct hw **rhw) +{ + struct hw20k1 *hw20k1; + + *rhw = NULL; + hw20k1 = kzalloc(sizeof(*hw20k1), GFP_KERNEL); + if (NULL == hw20k1) + return -ENOMEM; + + spin_lock_init(&hw20k1->reg_20k1_lock); + spin_lock_init(&hw20k1->reg_pci_lock); + + hw20k1->hw = ct20k1_preset; + + *rhw = &hw20k1->hw; + + return 0; +} + +int destroy_20k1_hw_obj(struct hw *hw) +{ + if (hw->io_base) + hw_card_shutdown(hw); + + kfree(container_of(hw, struct hw20k1, hw)); + return 0; +} diff --git a/sound/pci/ctxfi/cthw20k1.h b/sound/pci/ctxfi/cthw20k1.h new file mode 100644 index 0000000..02f72fb --- /dev/null +++ b/sound/pci/ctxfi/cthw20k1.h @@ -0,0 +1,26 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File cthw20k1.h + * + * @Brief + * This file contains the definition of hardware access methord. + * + * @Author Liu Chun + * @Date May 13 2008 + * + */ + +#ifndef CTHW20K1_H +#define CTHW20K1_H + +#include "cthardware.h" + +int create_20k1_hw_obj(struct hw **rhw); +int destroy_20k1_hw_obj(struct hw *hw); + +#endif /* CTHW20K1_H */ diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c new file mode 100644 index 0000000..4493a51 --- /dev/null +++ b/sound/pci/ctxfi/cthw20k2.c @@ -0,0 +1,2137 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File cthw20k2.c + * + * @Brief + * This file contains the implementation of hardware access methord for 20k2. + * + * @Author Liu Chun + * @Date May 14 2008 + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "cthw20k2.h" +#include "ct20k2reg.h" + +#if BITS_PER_LONG == 32 +#define CT_XFI_DMA_MASK DMA_BIT_MASK(32) /* 32 bit PTE */ +#else +#define CT_XFI_DMA_MASK DMA_BIT_MASK(64) /* 64 bit PTE */ +#endif + +struct hw20k2 { + struct hw hw; + /* for i2c */ + unsigned char dev_id; + unsigned char addr_size; + unsigned char data_size; +}; + +static u32 hw_read_20kx(struct hw *hw, u32 reg); +static void hw_write_20kx(struct hw *hw, u32 reg, u32 data); + +/* + * Type definition block. + * The layout of control structures can be directly applied on 20k2 chip. + */ + +/* + * SRC control block definitions. + */ + +/* SRC resource control block */ +#define SRCCTL_STATE 0x00000007 +#define SRCCTL_BM 0x00000008 +#define SRCCTL_RSR 0x00000030 +#define SRCCTL_SF 0x000001C0 +#define SRCCTL_WR 0x00000200 +#define SRCCTL_PM 0x00000400 +#define SRCCTL_ROM 0x00001800 +#define SRCCTL_VO 0x00002000 +#define SRCCTL_ST 0x00004000 +#define SRCCTL_IE 0x00008000 +#define SRCCTL_ILSZ 0x000F0000 +#define SRCCTL_BP 0x00100000 + +#define SRCCCR_CISZ 0x000007FF +#define SRCCCR_CWA 0x001FF800 +#define SRCCCR_D 0x00200000 +#define SRCCCR_RS 0x01C00000 +#define SRCCCR_NAL 0x3E000000 +#define SRCCCR_RA 0xC0000000 + +#define SRCCA_CA 0x0FFFFFFF +#define SRCCA_RS 0xE0000000 + +#define SRCSA_SA 0x0FFFFFFF + +#define SRCLA_LA 0x0FFFFFFF + +/* Mixer Parameter Ring ram Low and Hight register. + * Fixed-point value in 8.24 format for parameter channel */ +#define MPRLH_PITCH 0xFFFFFFFF + +/* SRC resource register dirty flags */ +union src_dirty { + struct { + u16 ctl:1; + u16 ccr:1; + u16 sa:1; + u16 la:1; + u16 ca:1; + u16 mpr:1; + u16 czbfs:1; /* Clear Z-Buffers */ + u16 rsv:9; + } bf; + u16 data; +}; + +struct src_rsc_ctrl_blk { + unsigned int ctl; + unsigned int ccr; + unsigned int ca; + unsigned int sa; + unsigned int la; + unsigned int mpr; + union src_dirty dirty; +}; + +/* SRC manager control block */ +union src_mgr_dirty { + struct { + u16 enb0:1; + u16 enb1:1; + u16 enb2:1; + u16 enb3:1; + u16 enb4:1; + u16 enb5:1; + u16 enb6:1; + u16 enb7:1; + u16 enbsa:1; + u16 rsv:7; + } bf; + u16 data; +}; + +struct src_mgr_ctrl_blk { + unsigned int enbsa; + unsigned int enb[8]; + union src_mgr_dirty dirty; +}; + +/* SRCIMP manager control block */ +#define SRCAIM_ARC 0x00000FFF +#define SRCAIM_NXT 0x00FF0000 +#define SRCAIM_SRC 0xFF000000 + +struct srcimap { + unsigned int srcaim; + unsigned int idx; +}; + +/* SRCIMP manager register dirty flags */ +union srcimp_mgr_dirty { + struct { + u16 srcimap:1; + u16 rsv:15; + } bf; + u16 data; +}; + +struct srcimp_mgr_ctrl_blk { + struct srcimap srcimap; + union srcimp_mgr_dirty dirty; +}; + +/* + * Function implementation block. + */ + +static int src_get_rsc_ctrl_blk(void **rblk) +{ + struct src_rsc_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int src_put_rsc_ctrl_blk(void *blk) +{ + kfree(blk); + + return 0; +} + +static int src_set_state(void *blk, unsigned int state) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_STATE, state); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_bm(void *blk, unsigned int bm) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_BM, bm); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_rsr(void *blk, unsigned int rsr) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_RSR, rsr); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_sf(void *blk, unsigned int sf) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_SF, sf); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_wr(void *blk, unsigned int wr) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_WR, wr); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_pm(void *blk, unsigned int pm) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_PM, pm); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_rom(void *blk, unsigned int rom) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_ROM, rom); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_vo(void *blk, unsigned int vo) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_VO, vo); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_st(void *blk, unsigned int st) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_ST, st); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_ie(void *blk, unsigned int ie) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_IE, ie); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_ilsz(void *blk, unsigned int ilsz) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_ILSZ, ilsz); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_bp(void *blk, unsigned int bp) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ctl, SRCCTL_BP, bp); + ctl->dirty.bf.ctl = 1; + return 0; +} + +static int src_set_cisz(void *blk, unsigned int cisz) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ccr, SRCCCR_CISZ, cisz); + ctl->dirty.bf.ccr = 1; + return 0; +} + +static int src_set_ca(void *blk, unsigned int ca) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->ca, SRCCA_CA, ca); + ctl->dirty.bf.ca = 1; + return 0; +} + +static int src_set_sa(void *blk, unsigned int sa) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->sa, SRCSA_SA, sa); + ctl->dirty.bf.sa = 1; + return 0; +} + +static int src_set_la(void *blk, unsigned int la) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->la, SRCLA_LA, la); + ctl->dirty.bf.la = 1; + return 0; +} + +static int src_set_pitch(void *blk, unsigned int pitch) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->mpr, MPRLH_PITCH, pitch); + ctl->dirty.bf.mpr = 1; + return 0; +} + +static int src_set_clear_zbufs(void *blk, unsigned int clear) +{ + ((struct src_rsc_ctrl_blk *)blk)->dirty.bf.czbfs = (clear ? 1 : 0); + return 0; +} + +static int src_set_dirty(void *blk, unsigned int flags) +{ + ((struct src_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff); + return 0; +} + +static int src_set_dirty_all(void *blk) +{ + ((struct src_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0); + return 0; +} + +#define AR_SLOT_SIZE 4096 +#define AR_SLOT_BLOCK_SIZE 16 +#define AR_PTS_PITCH 6 +#define AR_PARAM_SRC_OFFSET 0x60 + +static unsigned int src_param_pitch_mixer(unsigned int src_idx) +{ + return ((src_idx << 4) + AR_PTS_PITCH + AR_SLOT_SIZE + - AR_PARAM_SRC_OFFSET) % AR_SLOT_SIZE; + +} + +static int src_commit_write(struct hw *hw, unsigned int idx, void *blk) +{ + struct src_rsc_ctrl_blk *ctl = blk; + int i; + + if (ctl->dirty.bf.czbfs) { + /* Clear Z-Buffer registers */ + for (i = 0; i < 8; i++) + hw_write_20kx(hw, SRC_UPZ+idx*0x100+i*0x4, 0); + + for (i = 0; i < 4; i++) + hw_write_20kx(hw, SRC_DN0Z+idx*0x100+i*0x4, 0); + + for (i = 0; i < 8; i++) + hw_write_20kx(hw, SRC_DN1Z+idx*0x100+i*0x4, 0); + + ctl->dirty.bf.czbfs = 0; + } + if (ctl->dirty.bf.mpr) { + /* Take the parameter mixer resource in the same group as that + * the idx src is in for simplicity. Unlike src, all conjugate + * parameter mixer resources must be programmed for + * corresponding conjugate src resources. */ + unsigned int pm_idx = src_param_pitch_mixer(idx); + hw_write_20kx(hw, MIXER_PRING_LO_HI+4*pm_idx, ctl->mpr); + hw_write_20kx(hw, MIXER_PMOPLO+8*pm_idx, 0x3); + hw_write_20kx(hw, MIXER_PMOPHI+8*pm_idx, 0x0); + ctl->dirty.bf.mpr = 0; + } + if (ctl->dirty.bf.sa) { + hw_write_20kx(hw, SRC_SA+idx*0x100, ctl->sa); + ctl->dirty.bf.sa = 0; + } + if (ctl->dirty.bf.la) { + hw_write_20kx(hw, SRC_LA+idx*0x100, ctl->la); + ctl->dirty.bf.la = 0; + } + if (ctl->dirty.bf.ca) { + hw_write_20kx(hw, SRC_CA+idx*0x100, ctl->ca); + ctl->dirty.bf.ca = 0; + } + + /* Write srccf register */ + hw_write_20kx(hw, SRC_CF+idx*0x100, 0x0); + + if (ctl->dirty.bf.ccr) { + hw_write_20kx(hw, SRC_CCR+idx*0x100, ctl->ccr); + ctl->dirty.bf.ccr = 0; + } + if (ctl->dirty.bf.ctl) { + hw_write_20kx(hw, SRC_CTL+idx*0x100, ctl->ctl); + ctl->dirty.bf.ctl = 0; + } + + return 0; +} + +static int src_get_ca(struct hw *hw, unsigned int idx, void *blk) +{ + struct src_rsc_ctrl_blk *ctl = blk; + + ctl->ca = hw_read_20kx(hw, SRC_CA+idx*0x100); + ctl->dirty.bf.ca = 0; + + return get_field(ctl->ca, SRCCA_CA); +} + +static unsigned int src_get_dirty(void *blk) +{ + return ((struct src_rsc_ctrl_blk *)blk)->dirty.data; +} + +static unsigned int src_dirty_conj_mask(void) +{ + return 0x20; +} + +static int src_mgr_enbs_src(void *blk, unsigned int idx) +{ + ((struct src_mgr_ctrl_blk *)blk)->enbsa |= (0x1 << ((idx%128)/4)); + ((struct src_mgr_ctrl_blk *)blk)->dirty.bf.enbsa = 1; + ((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32)); + return 0; +} + +static int src_mgr_enb_src(void *blk, unsigned int idx) +{ + ((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32)); + ((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32)); + return 0; +} + +static int src_mgr_dsb_src(void *blk, unsigned int idx) +{ + ((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] &= ~(0x1 << (idx%32)); + ((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32)); + return 0; +} + +static int src_mgr_commit_write(struct hw *hw, void *blk) +{ + struct src_mgr_ctrl_blk *ctl = blk; + int i; + unsigned int ret; + + if (ctl->dirty.bf.enbsa) { + do { + ret = hw_read_20kx(hw, SRC_ENBSTAT); + } while (ret & 0x1); + hw_write_20kx(hw, SRC_ENBSA, ctl->enbsa); + ctl->dirty.bf.enbsa = 0; + } + for (i = 0; i < 8; i++) { + if ((ctl->dirty.data & (0x1 << i))) { + hw_write_20kx(hw, SRC_ENB+(i*0x100), ctl->enb[i]); + ctl->dirty.data &= ~(0x1 << i); + } + } + + return 0; +} + +static int src_mgr_get_ctrl_blk(void **rblk) +{ + struct src_mgr_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int src_mgr_put_ctrl_blk(void *blk) +{ + kfree(blk); + + return 0; +} + +static int srcimp_mgr_get_ctrl_blk(void **rblk) +{ + struct srcimp_mgr_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int srcimp_mgr_put_ctrl_blk(void *blk) +{ + kfree(blk); + + return 0; +} + +static int srcimp_mgr_set_imaparc(void *blk, unsigned int slot) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->srcimap.srcaim, SRCAIM_ARC, slot); + ctl->dirty.bf.srcimap = 1; + return 0; +} + +static int srcimp_mgr_set_imapuser(void *blk, unsigned int user) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->srcimap.srcaim, SRCAIM_SRC, user); + ctl->dirty.bf.srcimap = 1; + return 0; +} + +static int srcimp_mgr_set_imapnxt(void *blk, unsigned int next) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->srcimap.srcaim, SRCAIM_NXT, next); + ctl->dirty.bf.srcimap = 1; + return 0; +} + +static int srcimp_mgr_set_imapaddr(void *blk, unsigned int addr) +{ + ((struct srcimp_mgr_ctrl_blk *)blk)->srcimap.idx = addr; + ((struct srcimp_mgr_ctrl_blk *)blk)->dirty.bf.srcimap = 1; + return 0; +} + +static int srcimp_mgr_commit_write(struct hw *hw, void *blk) +{ + struct srcimp_mgr_ctrl_blk *ctl = blk; + + if (ctl->dirty.bf.srcimap) { + hw_write_20kx(hw, SRC_IMAP+ctl->srcimap.idx*0x100, + ctl->srcimap.srcaim); + ctl->dirty.bf.srcimap = 0; + } + + return 0; +} + +/* + * AMIXER control block definitions. + */ + +#define AMOPLO_M 0x00000003 +#define AMOPLO_IV 0x00000004 +#define AMOPLO_X 0x0003FFF0 +#define AMOPLO_Y 0xFFFC0000 + +#define AMOPHI_SADR 0x000000FF +#define AMOPHI_SE 0x80000000 + +/* AMIXER resource register dirty flags */ +union amixer_dirty { + struct { + u16 amoplo:1; + u16 amophi:1; + u16 rsv:14; + } bf; + u16 data; +}; + +/* AMIXER resource control block */ +struct amixer_rsc_ctrl_blk { + unsigned int amoplo; + unsigned int amophi; + union amixer_dirty dirty; +}; + +static int amixer_set_mode(void *blk, unsigned int mode) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amoplo, AMOPLO_M, mode); + ctl->dirty.bf.amoplo = 1; + return 0; +} + +static int amixer_set_iv(void *blk, unsigned int iv) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amoplo, AMOPLO_IV, iv); + ctl->dirty.bf.amoplo = 1; + return 0; +} + +static int amixer_set_x(void *blk, unsigned int x) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amoplo, AMOPLO_X, x); + ctl->dirty.bf.amoplo = 1; + return 0; +} + +static int amixer_set_y(void *blk, unsigned int y) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amoplo, AMOPLO_Y, y); + ctl->dirty.bf.amoplo = 1; + return 0; +} + +static int amixer_set_sadr(void *blk, unsigned int sadr) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amophi, AMOPHI_SADR, sadr); + ctl->dirty.bf.amophi = 1; + return 0; +} + +static int amixer_set_se(void *blk, unsigned int se) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + set_field(&ctl->amophi, AMOPHI_SE, se); + ctl->dirty.bf.amophi = 1; + return 0; +} + +static int amixer_set_dirty(void *blk, unsigned int flags) +{ + ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff); + return 0; +} + +static int amixer_set_dirty_all(void *blk) +{ + ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0); + return 0; +} + +static int amixer_commit_write(struct hw *hw, unsigned int idx, void *blk) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + if (ctl->dirty.bf.amoplo || ctl->dirty.bf.amophi) { + hw_write_20kx(hw, MIXER_AMOPLO+idx*8, ctl->amoplo); + ctl->dirty.bf.amoplo = 0; + hw_write_20kx(hw, MIXER_AMOPHI+idx*8, ctl->amophi); + ctl->dirty.bf.amophi = 0; + } + + return 0; +} + +static int amixer_get_y(void *blk) +{ + struct amixer_rsc_ctrl_blk *ctl = blk; + + return get_field(ctl->amoplo, AMOPLO_Y); +} + +static unsigned int amixer_get_dirty(void *blk) +{ + return ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data; +} + +static int amixer_rsc_get_ctrl_blk(void **rblk) +{ + struct amixer_rsc_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int amixer_rsc_put_ctrl_blk(void *blk) +{ + kfree(blk); + + return 0; +} + +static int amixer_mgr_get_ctrl_blk(void **rblk) +{ + *rblk = NULL; + + return 0; +} + +static int amixer_mgr_put_ctrl_blk(void *blk) +{ + return 0; +} + +/* + * DAIO control block definitions. + */ + +/* Receiver Sample Rate Tracker Control register */ +#define SRTCTL_SRCO 0x000000FF +#define SRTCTL_SRCM 0x0000FF00 +#define SRTCTL_RSR 0x00030000 +#define SRTCTL_DRAT 0x00300000 +#define SRTCTL_EC 0x01000000 +#define SRTCTL_ET 0x10000000 + +/* DAIO Receiver register dirty flags */ +union dai_dirty { + struct { + u16 srt:1; + u16 rsv:15; + } bf; + u16 data; +}; + +/* DAIO Receiver control block */ +struct dai_ctrl_blk { + unsigned int srt; + union dai_dirty dirty; +}; + +/* Audio Input Mapper RAM */ +#define AIM_ARC 0x00000FFF +#define AIM_NXT 0x007F0000 + +struct daoimap { + unsigned int aim; + unsigned int idx; +}; + +/* Audio Transmitter Control and Status register */ +#define ATXCTL_EN 0x00000001 +#define ATXCTL_MODE 0x00000010 +#define ATXCTL_CD 0x00000020 +#define ATXCTL_RAW 0x00000100 +#define ATXCTL_MT 0x00000200 +#define ATXCTL_NUC 0x00003000 +#define ATXCTL_BEN 0x00010000 +#define ATXCTL_BMUX 0x00700000 +#define ATXCTL_B24 0x01000000 +#define ATXCTL_CPF 0x02000000 +#define ATXCTL_RIV 0x10000000 +#define ATXCTL_LIV 0x20000000 +#define ATXCTL_RSAT 0x40000000 +#define ATXCTL_LSAT 0x80000000 + +/* XDIF Transmitter register dirty flags */ +union dao_dirty { + struct { + u16 atxcsl:1; + u16 rsv:15; + } bf; + u16 data; +}; + +/* XDIF Transmitter control block */ +struct dao_ctrl_blk { + /* XDIF Transmitter Channel Status Low Register */ + unsigned int atxcsl; + union dao_dirty dirty; +}; + +/* Audio Receiver Control register */ +#define ARXCTL_EN 0x00000001 + +/* DAIO manager register dirty flags */ +union daio_mgr_dirty { + struct { + u32 atxctl:8; + u32 arxctl:8; + u32 daoimap:1; + u32 rsv:15; + } bf; + u32 data; +}; + +/* DAIO manager control block */ +struct daio_mgr_ctrl_blk { + struct daoimap daoimap; + unsigned int txctl[8]; + unsigned int rxctl[8]; + union daio_mgr_dirty dirty; +}; + +static int dai_srt_set_srco(void *blk, unsigned int src) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srt, SRTCTL_SRCO, src); + ctl->dirty.bf.srt = 1; + return 0; +} + +static int dai_srt_set_srcm(void *blk, unsigned int src) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srt, SRTCTL_SRCM, src); + ctl->dirty.bf.srt = 1; + return 0; +} + +static int dai_srt_set_rsr(void *blk, unsigned int rsr) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srt, SRTCTL_RSR, rsr); + ctl->dirty.bf.srt = 1; + return 0; +} + +static int dai_srt_set_drat(void *blk, unsigned int drat) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srt, SRTCTL_DRAT, drat); + ctl->dirty.bf.srt = 1; + return 0; +} + +static int dai_srt_set_ec(void *blk, unsigned int ec) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srt, SRTCTL_EC, ec ? 1 : 0); + ctl->dirty.bf.srt = 1; + return 0; +} + +static int dai_srt_set_et(void *blk, unsigned int et) +{ + struct dai_ctrl_blk *ctl = blk; + + set_field(&ctl->srt, SRTCTL_ET, et ? 1 : 0); + ctl->dirty.bf.srt = 1; + return 0; +} + +static int dai_commit_write(struct hw *hw, unsigned int idx, void *blk) +{ + struct dai_ctrl_blk *ctl = blk; + + if (ctl->dirty.bf.srt) { + hw_write_20kx(hw, AUDIO_IO_RX_SRT_CTL+0x40*idx, ctl->srt); + ctl->dirty.bf.srt = 0; + } + + return 0; +} + +static int dai_get_ctrl_blk(void **rblk) +{ + struct dai_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int dai_put_ctrl_blk(void *blk) +{ + kfree(blk); + + return 0; +} + +static int dao_set_spos(void *blk, unsigned int spos) +{ + ((struct dao_ctrl_blk *)blk)->atxcsl = spos; + ((struct dao_ctrl_blk *)blk)->dirty.bf.atxcsl = 1; + return 0; +} + +static int dao_commit_write(struct hw *hw, unsigned int idx, void *blk) +{ + struct dao_ctrl_blk *ctl = blk; + + if (ctl->dirty.bf.atxcsl) { + if (idx < 4) { + /* S/PDIF SPOSx */ + hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_L+0x40*idx, + ctl->atxcsl); + } + ctl->dirty.bf.atxcsl = 0; + } + + return 0; +} + +static int dao_get_spos(void *blk, unsigned int *spos) +{ + *spos = ((struct dao_ctrl_blk *)blk)->atxcsl; + return 0; +} + +static int dao_get_ctrl_blk(void **rblk) +{ + struct dao_ctrl_blk *blk; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + *rblk = blk; + + return 0; +} + +static int dao_put_ctrl_blk(void *blk) +{ + kfree(blk); + + return 0; +} + +static int daio_mgr_enb_dai(void *blk, unsigned int idx) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->rxctl[idx], ARXCTL_EN, 1); + ctl->dirty.bf.arxctl |= (0x1 << idx); + return 0; +} + +static int daio_mgr_dsb_dai(void *blk, unsigned int idx) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->rxctl[idx], ARXCTL_EN, 0); + + ctl->dirty.bf.arxctl |= (0x1 << idx); + return 0; +} + +static int daio_mgr_enb_dao(void *blk, unsigned int idx) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->txctl[idx], ATXCTL_EN, 1); + ctl->dirty.bf.atxctl |= (0x1 << idx); + return 0; +} + +static int daio_mgr_dsb_dao(void *blk, unsigned int idx) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->txctl[idx], ATXCTL_EN, 0); + ctl->dirty.bf.atxctl |= (0x1 << idx); + return 0; +} + +static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + if (idx < 4) { + /* S/PDIF output */ + switch ((conf & 0x7)) { + case 1: + set_field(&ctl->txctl[idx], ATXCTL_NUC, 0); + break; + case 2: + set_field(&ctl->txctl[idx], ATXCTL_NUC, 1); + break; + case 4: + set_field(&ctl->txctl[idx], ATXCTL_NUC, 2); + break; + case 8: + set_field(&ctl->txctl[idx], ATXCTL_NUC, 3); + break; + default: + break; + } + /* CDIF */ + set_field(&ctl->txctl[idx], ATXCTL_CD, (!(conf & 0x7))); + /* Non-audio */ + set_field(&ctl->txctl[idx], ATXCTL_LIV, (conf >> 4) & 0x1); + /* Non-audio */ + set_field(&ctl->txctl[idx], ATXCTL_RIV, (conf >> 4) & 0x1); + set_field(&ctl->txctl[idx], ATXCTL_RAW, + ((conf >> 3) & 0x1) ? 0 : 0); + ctl->dirty.bf.atxctl |= (0x1 << idx); + } else { + /* I2S output */ + /*idx %= 4; */ + } + return 0; +} + +static int daio_mgr_set_imaparc(void *blk, unsigned int slot) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->daoimap.aim, AIM_ARC, slot); + ctl->dirty.bf.daoimap = 1; + return 0; +} + +static int daio_mgr_set_imapnxt(void *blk, unsigned int next) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + + set_field(&ctl->daoimap.aim, AIM_NXT, next); + ctl->dirty.bf.daoimap = 1; + return 0; +} + +static int daio_mgr_set_imapaddr(void *blk, unsigned int addr) +{ + ((struct daio_mgr_ctrl_blk *)blk)->daoimap.idx = addr; + ((struct daio_mgr_ctrl_blk *)blk)->dirty.bf.daoimap = 1; + return 0; +} + +static int daio_mgr_commit_write(struct hw *hw, void *blk) +{ + struct daio_mgr_ctrl_blk *ctl = blk; + unsigned int data; + int i; + + for (i = 0; i < 8; i++) { + if ((ctl->dirty.bf.atxctl & (0x1 << i))) { + data = ctl->txctl[i]; + hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data); + ctl->dirty.bf.atxctl &= ~(0x1 << i); + mdelay(1); + } + if ((ctl->dirty.bf.arxctl & (0x1 << i))) { + data = ctl->rxctl[i]; + hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data); + ctl->dirty.bf.arxctl &= ~(0x1 << i); + mdelay(1); + } + } + if (ctl->dirty.bf.daoimap) { + hw_write_20kx(hw, AUDIO_IO_AIM+ctl->daoimap.idx*4, + ctl->daoimap.aim); + ctl->dirty.bf.daoimap = 0; + } + + return 0; +} + +static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk) +{ + struct daio_mgr_ctrl_blk *blk; + int i; + + *rblk = NULL; + blk = kzalloc(sizeof(*blk), GFP_KERNEL); + if (NULL == blk) + return -ENOMEM; + + for (i = 0; i < 8; i++) { + blk->txctl[i] = hw_read_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i)); + blk->rxctl[i] = hw_read_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i)); + } + + *rblk = blk; + + return 0; +} + +static int daio_mgr_put_ctrl_blk(void *blk) +{ + kfree(blk); + + return 0; +} + +/* Card hardware initialization block */ +struct dac_conf { + unsigned int msr; /* master sample rate in rsrs */ +}; + +struct adc_conf { + unsigned int msr; /* master sample rate in rsrs */ + unsigned char input; /* the input source of ADC */ + unsigned char mic20db; /* boost mic by 20db if input is microphone */ +}; + +struct daio_conf { + unsigned int msr; /* master sample rate in rsrs */ +}; + +struct trn_conf { + unsigned long vm_pgt_phys; +}; + +static int hw_daio_init(struct hw *hw, const struct daio_conf *info) +{ + u32 data; + int i; + + /* Program I2S with proper sample rate and enable the correct I2S + * channel. ED(0/8/16/24): Enable all I2S/I2X master clock output */ + if (1 == info->msr) { + hw_write_20kx(hw, AUDIO_IO_MCLK, 0x01010101); + hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x01010101); + hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0); + } else if (2 == info->msr) { + hw_write_20kx(hw, AUDIO_IO_MCLK, 0x11111111); + /* Specify all playing 96khz + * EA [0] - Enabled + * RTA [4:5] - 96kHz + * EB [8] - Enabled + * RTB [12:13] - 96kHz + * EC [16] - Enabled + * RTC [20:21] - 96kHz + * ED [24] - Enabled + * RTD [28:29] - 96kHz */ + hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x11111111); + hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0); + } else { + printk(KERN_ALERT "ctxfi: ERROR!!! Invalid sampling rate!!!\n"); + return -EINVAL; + } + + for (i = 0; i < 8; i++) { + if (i <= 3) { + /* 1st 3 channels are SPDIFs (SB0960) */ + if (i == 3) + data = 0x1001001; + else + data = 0x1000001; + + hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data); + hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data); + + /* Initialize the SPDIF Out Channel status registers. + * The value specified here is based on the typical + * values provided in the specification, namely: Clock + * Accuracy of 1000ppm, Sample Rate of 48KHz, + * unspecified source number, Generation status = 1, + * Category code = 0x12 (Digital Signal Mixer), + * Mode = 0, Emph = 0, Copy Permitted, AN = 0 + * (indicating that we're transmitting digital audio, + * and the Professional Use bit is 0. */ + + hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_L+(0x40*i), + 0x02109204); /* Default to 48kHz */ + + hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_H+(0x40*i), 0x0B); + } else { + /* Next 5 channels are I2S (SB0960) */ + data = 0x11; + hw_write_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i), data); + if (2 == info->msr) { + /* Four channels per sample period */ + data |= 0x1000; + } + hw_write_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i), data); + } + } + + return 0; +} + +/* TRANSPORT operations */ +static int hw_trn_init(struct hw *hw, const struct trn_conf *info) +{ + u32 vmctl, data; + u32 ptp_phys_low, ptp_phys_high; + int i; + + /* Set up device page table */ + if ((~0UL) == info->vm_pgt_phys) { + printk(KERN_ALERT "ctxfi: " + "Wrong device page table page address!!!\n"); + return -1; + } + + vmctl = 0x80000C0F; /* 32-bit, 4k-size page */ + ptp_phys_low = (u32)info->vm_pgt_phys; + ptp_phys_high = upper_32_bits(info->vm_pgt_phys); + if (sizeof(void *) == 8) /* 64bit address */ + vmctl |= (3 << 8); + /* Write page table physical address to all PTPAL registers */ + for (i = 0; i < 64; i++) { + hw_write_20kx(hw, VMEM_PTPAL+(16*i), ptp_phys_low); + hw_write_20kx(hw, VMEM_PTPAH+(16*i), ptp_phys_high); + } + /* Enable virtual memory transfer */ + hw_write_20kx(hw, VMEM_CTL, vmctl); + /* Enable transport bus master and queueing of request */ + hw_write_20kx(hw, TRANSPORT_CTL, 0x03); + hw_write_20kx(hw, TRANSPORT_INT, 0x200c01); + /* Enable transport ring */ + data = hw_read_20kx(hw, TRANSPORT_ENB); + hw_write_20kx(hw, TRANSPORT_ENB, (data | 0x03)); + + return 0; +} + +/* Card initialization */ +#define GCTL_AIE 0x00000001 +#define GCTL_UAA 0x00000002 +#define GCTL_DPC 0x00000004 +#define GCTL_DBP 0x00000008 +#define GCTL_ABP 0x00000010 +#define GCTL_TBP 0x00000020 +#define GCTL_SBP 0x00000040 +#define GCTL_FBP 0x00000080 +#define GCTL_ME 0x00000100 +#define GCTL_AID 0x00001000 + +#define PLLCTL_SRC 0x00000007 +#define PLLCTL_SPE 0x00000008 +#define PLLCTL_RD 0x000000F0 +#define PLLCTL_FD 0x0001FF00 +#define PLLCTL_OD 0x00060000 +#define PLLCTL_B 0x00080000 +#define PLLCTL_AS 0x00100000 +#define PLLCTL_LF 0x03E00000 +#define PLLCTL_SPS 0x1C000000 +#define PLLCTL_AD 0x60000000 + +#define PLLSTAT_CCS 0x00000007 +#define PLLSTAT_SPL 0x00000008 +#define PLLSTAT_CRD 0x000000F0 +#define PLLSTAT_CFD 0x0001FF00 +#define PLLSTAT_SL 0x00020000 +#define PLLSTAT_FAS 0x00040000 +#define PLLSTAT_B 0x00080000 +#define PLLSTAT_PD 0x00100000 +#define PLLSTAT_OCA 0x00200000 +#define PLLSTAT_NCA 0x00400000 + +static int hw_pll_init(struct hw *hw, unsigned int rsr) +{ + unsigned int pllenb; + unsigned int pllctl; + unsigned int pllstat; + int i; + + pllenb = 0xB; + hw_write_20kx(hw, PLL_ENB, pllenb); + pllctl = 0x20D00000; + set_field(&pllctl, PLLCTL_FD, 16 - 4); + hw_write_20kx(hw, PLL_CTL, pllctl); + mdelay(40); + pllctl = hw_read_20kx(hw, PLL_CTL); + set_field(&pllctl, PLLCTL_B, 0); + if (48000 == rsr) { + set_field(&pllctl, PLLCTL_FD, 16 - 2); + set_field(&pllctl, PLLCTL_RD, 1 - 1); + } else { /* 44100 */ + set_field(&pllctl, PLLCTL_FD, 147 - 2); + set_field(&pllctl, PLLCTL_RD, 10 - 1); + } + hw_write_20kx(hw, PLL_CTL, pllctl); + mdelay(40); + for (i = 0; i < 1000; i++) { + pllstat = hw_read_20kx(hw, PLL_STAT); + if (get_field(pllstat, PLLSTAT_PD)) + continue; + + if (get_field(pllstat, PLLSTAT_B) != + get_field(pllctl, PLLCTL_B)) + continue; + + if (get_field(pllstat, PLLSTAT_CCS) != + get_field(pllctl, PLLCTL_SRC)) + continue; + + if (get_field(pllstat, PLLSTAT_CRD) != + get_field(pllctl, PLLCTL_RD)) + continue; + + if (get_field(pllstat, PLLSTAT_CFD) != + get_field(pllctl, PLLCTL_FD)) + continue; + + break; + } + if (i >= 1000) { + printk(KERN_ALERT "ctxfi: PLL initialization failed!!!\n"); + return -EBUSY; + } + + return 0; +} + +static int hw_auto_init(struct hw *hw) +{ + unsigned int gctl; + int i; + + gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL); + set_field(&gctl, GCTL_AIE, 0); + hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl); + set_field(&gctl, GCTL_AIE, 1); + hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl); + mdelay(10); + for (i = 0; i < 400000; i++) { + gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL); + if (get_field(gctl, GCTL_AID)) + break; + } + if (!get_field(gctl, GCTL_AID)) { + printk(KERN_ALERT "ctxfi: Card Auto-init failed!!!\n"); + return -EBUSY; + } + + return 0; +} + +/* DAC operations */ + +#define CS4382_MC1 0x1 +#define CS4382_MC2 0x2 +#define CS4382_MC3 0x3 +#define CS4382_FC 0x4 +#define CS4382_IC 0x5 +#define CS4382_XC1 0x6 +#define CS4382_VCA1 0x7 +#define CS4382_VCB1 0x8 +#define CS4382_XC2 0x9 +#define CS4382_VCA2 0xA +#define CS4382_VCB2 0xB +#define CS4382_XC3 0xC +#define CS4382_VCA3 0xD +#define CS4382_VCB3 0xE +#define CS4382_XC4 0xF +#define CS4382_VCA4 0x10 +#define CS4382_VCB4 0x11 +#define CS4382_CREV 0x12 + +/* I2C status */ +#define STATE_LOCKED 0x00 +#define STATE_UNLOCKED 0xAA +#define DATA_READY 0x800000 /* Used with I2C_IF_STATUS */ +#define DATA_ABORT 0x10000 /* Used with I2C_IF_STATUS */ + +#define I2C_STATUS_DCM 0x00000001 +#define I2C_STATUS_BC 0x00000006 +#define I2C_STATUS_APD 0x00000008 +#define I2C_STATUS_AB 0x00010000 +#define I2C_STATUS_DR 0x00800000 + +#define I2C_ADDRESS_PTAD 0x0000FFFF +#define I2C_ADDRESS_SLAD 0x007F0000 + +struct regs_cs4382 { + u32 mode_control_1; + u32 mode_control_2; + u32 mode_control_3; + + u32 filter_control; + u32 invert_control; + + u32 mix_control_P1; + u32 vol_control_A1; + u32 vol_control_B1; + + u32 mix_control_P2; + u32 vol_control_A2; + u32 vol_control_B2; + + u32 mix_control_P3; + u32 vol_control_A3; + u32 vol_control_B3; + + u32 mix_control_P4; + u32 vol_control_A4; + u32 vol_control_B4; +}; + +static int hw20k2_i2c_unlock_full_access(struct hw *hw) +{ + u8 UnlockKeySequence_FLASH_FULLACCESS_MODE[2] = {0xB3, 0xD4}; + + /* Send keys for forced BIOS mode */ + hw_write_20kx(hw, I2C_IF_WLOCK, + UnlockKeySequence_FLASH_FULLACCESS_MODE[0]); + hw_write_20kx(hw, I2C_IF_WLOCK, + UnlockKeySequence_FLASH_FULLACCESS_MODE[1]); + /* Check whether the chip is unlocked */ + if (hw_read_20kx(hw, I2C_IF_WLOCK) == STATE_UNLOCKED) + return 0; + + return -1; +} + +static int hw20k2_i2c_lock_chip(struct hw *hw) +{ + /* Write twice */ + hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED); + hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED); + if (hw_read_20kx(hw, I2C_IF_WLOCK) == STATE_LOCKED) + return 0; + + return -1; +} + +static int hw20k2_i2c_init(struct hw *hw, u8 dev_id, u8 addr_size, u8 data_size) +{ + struct hw20k2 *hw20k2 = (struct hw20k2 *)hw; + int err; + unsigned int i2c_status; + unsigned int i2c_addr; + + err = hw20k2_i2c_unlock_full_access(hw); + if (err < 0) + return err; + + hw20k2->addr_size = addr_size; + hw20k2->data_size = data_size; + hw20k2->dev_id = dev_id; + + i2c_addr = 0; + set_field(&i2c_addr, I2C_ADDRESS_SLAD, dev_id); + + hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr); + + i2c_status = hw_read_20kx(hw, I2C_IF_STATUS); + + set_field(&i2c_status, I2C_STATUS_DCM, 1); /* Direct control mode */ + + hw_write_20kx(hw, I2C_IF_STATUS, i2c_status); + + return 0; +} + +static int hw20k2_i2c_uninit(struct hw *hw) +{ + unsigned int i2c_status; + unsigned int i2c_addr; + + i2c_addr = 0; + set_field(&i2c_addr, I2C_ADDRESS_SLAD, 0x57); /* I2C id */ + + hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr); + + i2c_status = hw_read_20kx(hw, I2C_IF_STATUS); + + set_field(&i2c_status, I2C_STATUS_DCM, 0); /* I2C mode */ + + hw_write_20kx(hw, I2C_IF_STATUS, i2c_status); + + return hw20k2_i2c_lock_chip(hw); +} + +static int hw20k2_i2c_wait_data_ready(struct hw *hw) +{ + int i = 0x400000; + unsigned int ret; + + do { + ret = hw_read_20kx(hw, I2C_IF_STATUS); + } while ((!(ret & DATA_READY)) && --i); + + return i; +} + +static int hw20k2_i2c_read(struct hw *hw, u16 addr, u32 *datap) +{ + struct hw20k2 *hw20k2 = (struct hw20k2 *)hw; + unsigned int i2c_status; + + i2c_status = hw_read_20kx(hw, I2C_IF_STATUS); + set_field(&i2c_status, I2C_STATUS_BC, + (4 == hw20k2->addr_size) ? 0 : hw20k2->addr_size); + hw_write_20kx(hw, I2C_IF_STATUS, i2c_status); + if (!hw20k2_i2c_wait_data_ready(hw)) + return -1; + + hw_write_20kx(hw, I2C_IF_WDATA, addr); + if (!hw20k2_i2c_wait_data_ready(hw)) + return -1; + + /* Force a read operation */ + hw_write_20kx(hw, I2C_IF_RDATA, 0); + if (!hw20k2_i2c_wait_data_ready(hw)) + return -1; + + *datap = hw_read_20kx(hw, I2C_IF_RDATA); + + return 0; +} + +static int hw20k2_i2c_write(struct hw *hw, u16 addr, u32 data) +{ + struct hw20k2 *hw20k2 = (struct hw20k2 *)hw; + unsigned int i2c_data = (data << (hw20k2->addr_size * 8)) | addr; + unsigned int i2c_status; + + i2c_status = hw_read_20kx(hw, I2C_IF_STATUS); + + set_field(&i2c_status, I2C_STATUS_BC, + (4 == (hw20k2->addr_size + hw20k2->data_size)) ? + 0 : (hw20k2->addr_size + hw20k2->data_size)); + + hw_write_20kx(hw, I2C_IF_STATUS, i2c_status); + hw20k2_i2c_wait_data_ready(hw); + /* Dummy write to trigger the write oprtation */ + hw_write_20kx(hw, I2C_IF_WDATA, 0); + hw20k2_i2c_wait_data_ready(hw); + + /* This is the real data */ + hw_write_20kx(hw, I2C_IF_WDATA, i2c_data); + hw20k2_i2c_wait_data_ready(hw); + + return 0; +} + +static int hw_dac_init(struct hw *hw, const struct dac_conf *info) +{ + int err; + u32 data; + int i; + struct regs_cs4382 cs_read = {0}; + struct regs_cs4382 cs_def = { + 0x00000001, /* Mode Control 1 */ + 0x00000000, /* Mode Control 2 */ + 0x00000084, /* Mode Control 3 */ + 0x00000000, /* Filter Control */ + 0x00000000, /* Invert Control */ + 0x00000024, /* Mixing Control Pair 1 */ + 0x00000000, /* Vol Control A1 */ + 0x00000000, /* Vol Control B1 */ + 0x00000024, /* Mixing Control Pair 2 */ + 0x00000000, /* Vol Control A2 */ + 0x00000000, /* Vol Control B2 */ + 0x00000024, /* Mixing Control Pair 3 */ + 0x00000000, /* Vol Control A3 */ + 0x00000000, /* Vol Control B3 */ + 0x00000024, /* Mixing Control Pair 4 */ + 0x00000000, /* Vol Control A4 */ + 0x00000000 /* Vol Control B4 */ + }; + + /* Set DAC reset bit as output */ + data = hw_read_20kx(hw, GPIO_CTRL); + data |= 0x02; + hw_write_20kx(hw, GPIO_CTRL, data); + + err = hw20k2_i2c_init(hw, 0x18, 1, 1); + if (err < 0) + goto End; + + for (i = 0; i < 2; i++) { + /* Reset DAC twice just in-case the chip + * didn't initialized properly */ + data = hw_read_20kx(hw, GPIO_DATA); + /* GPIO data bit 1 */ + data &= 0xFFFFFFFD; + hw_write_20kx(hw, GPIO_DATA, data); + mdelay(10); + data |= 0x2; + hw_write_20kx(hw, GPIO_DATA, data); + mdelay(50); + + /* Reset the 2nd time */ + data &= 0xFFFFFFFD; + hw_write_20kx(hw, GPIO_DATA, data); + mdelay(10); + data |= 0x2; + hw_write_20kx(hw, GPIO_DATA, data); + mdelay(50); + + if (hw20k2_i2c_read(hw, CS4382_MC1, &cs_read.mode_control_1)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_MC2, &cs_read.mode_control_2)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_MC3, &cs_read.mode_control_3)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_FC, &cs_read.filter_control)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_IC, &cs_read.invert_control)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_XC1, &cs_read.mix_control_P1)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_VCA1, &cs_read.vol_control_A1)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_VCB1, &cs_read.vol_control_B1)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_XC2, &cs_read.mix_control_P2)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_VCA2, &cs_read.vol_control_A2)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_VCB2, &cs_read.vol_control_B2)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_XC3, &cs_read.mix_control_P3)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_VCA3, &cs_read.vol_control_A3)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_VCB3, &cs_read.vol_control_B3)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_XC4, &cs_read.mix_control_P4)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_VCA4, &cs_read.vol_control_A4)) + continue; + + if (hw20k2_i2c_read(hw, CS4382_VCB4, &cs_read.vol_control_B4)) + continue; + + if (memcmp(&cs_read, &cs_def, sizeof(cs_read))) + continue; + else + break; + } + + if (i >= 2) + goto End; + + /* Note: Every I2C write must have some delay. + * This is not a requirement but the delay works here... */ + hw20k2_i2c_write(hw, CS4382_MC1, 0x80); + hw20k2_i2c_write(hw, CS4382_MC2, 0x10); + if (1 == info->msr) { + hw20k2_i2c_write(hw, CS4382_XC1, 0x24); + hw20k2_i2c_write(hw, CS4382_XC2, 0x24); + hw20k2_i2c_write(hw, CS4382_XC3, 0x24); + hw20k2_i2c_write(hw, CS4382_XC4, 0x24); + } else if (2 == info->msr) { + hw20k2_i2c_write(hw, CS4382_XC1, 0x25); + hw20k2_i2c_write(hw, CS4382_XC2, 0x25); + hw20k2_i2c_write(hw, CS4382_XC3, 0x25); + hw20k2_i2c_write(hw, CS4382_XC4, 0x25); + } else { + hw20k2_i2c_write(hw, CS4382_XC1, 0x26); + hw20k2_i2c_write(hw, CS4382_XC2, 0x26); + hw20k2_i2c_write(hw, CS4382_XC3, 0x26); + hw20k2_i2c_write(hw, CS4382_XC4, 0x26); + } + + return 0; +End: + + hw20k2_i2c_uninit(hw); + return -1; +} + +/* ADC operations */ +#define MAKE_WM8775_ADDR(addr, data) (u32)(((addr<<1)&0xFE)|((data>>8)&0x1)) +#define MAKE_WM8775_DATA(data) (u32)(data&0xFF) + +#define WM8775_IC 0x0B +#define WM8775_MMC 0x0C +#define WM8775_AADCL 0x0E +#define WM8775_AADCR 0x0F +#define WM8775_ADCMC 0x15 +#define WM8775_RESET 0x17 + +static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type) +{ + u32 data; + + data = hw_read_20kx(hw, GPIO_DATA); + switch (type) { + case ADC_MICIN: + data = (data & (0x1 << 14)) ? 1 : 0; + break; + case ADC_LINEIN: + data = (data & (0x1 << 14)) ? 0 : 1; + break; + default: + data = 0; + } + return data; +} + +static int hw_adc_input_select(struct hw *hw, enum ADCSRC type) +{ + u32 data; + + data = hw_read_20kx(hw, GPIO_DATA); + switch (type) { + case ADC_MICIN: + data |= (0x1 << 14); + hw_write_20kx(hw, GPIO_DATA, data); + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101), + MAKE_WM8775_DATA(0x101)); /* Mic-in */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7), + MAKE_WM8775_DATA(0xE7)); /* +12dB boost */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7), + MAKE_WM8775_DATA(0xE7)); /* +12dB boost */ + break; + case ADC_LINEIN: + data &= ~(0x1 << 14); + hw_write_20kx(hw, GPIO_DATA, data); + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102), + MAKE_WM8775_DATA(0x102)); /* Line-in */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF), + MAKE_WM8775_DATA(0xCF)); /* No boost */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF), + MAKE_WM8775_DATA(0xCF)); /* No boost */ + break; + default: + break; + } + + return 0; +} + +static int hw_adc_init(struct hw *hw, const struct adc_conf *info) +{ + int err; + u32 mux = 2, data, ctl; + + /* Set ADC reset bit as output */ + data = hw_read_20kx(hw, GPIO_CTRL); + data |= (0x1 << 15); + hw_write_20kx(hw, GPIO_CTRL, data); + + /* Initialize I2C */ + err = hw20k2_i2c_init(hw, 0x1A, 1, 1); + if (err < 0) { + printk(KERN_ALERT "ctxfi: Failure to acquire I2C!!!\n"); + goto error; + } + + /* Make ADC in normal operation */ + data = hw_read_20kx(hw, GPIO_DATA); + data &= ~(0x1 << 15); + mdelay(10); + data |= (0x1 << 15); + hw_write_20kx(hw, GPIO_DATA, data); + mdelay(50); + + /* Set the master mode (256fs) */ + if (1 == info->msr) { + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x02), + MAKE_WM8775_DATA(0x02)); + } else if (2 == info->msr) { + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A), + MAKE_WM8775_DATA(0x0A)); + } else { + printk(KERN_ALERT "ctxfi: Invalid master sampling " + "rate (msr %d)!!!\n", info->msr); + err = -EINVAL; + goto error; + } + + /* Configure GPIO bit 14 change to line-in/mic-in */ + ctl = hw_read_20kx(hw, GPIO_CTRL); + ctl |= 0x1 << 14; + hw_write_20kx(hw, GPIO_CTRL, ctl); + + /* Check using Mic-in or Line-in */ + data = hw_read_20kx(hw, GPIO_DATA); + + if (mux == 1) { + /* Configures GPIO data to select Mic-in */ + data |= 0x1 << 14; + hw_write_20kx(hw, GPIO_DATA, data); + + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101), + MAKE_WM8775_DATA(0x101)); /* Mic-in */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7), + MAKE_WM8775_DATA(0xE7)); /* +12dB boost */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7), + MAKE_WM8775_DATA(0xE7)); /* +12dB boost */ + } else if (mux == 2) { + /* Configures GPIO data to select Line-in */ + data &= ~(0x1 << 14); + hw_write_20kx(hw, GPIO_DATA, data); + + /* Setup ADC */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102), + MAKE_WM8775_DATA(0x102)); /* Line-in */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF), + MAKE_WM8775_DATA(0xCF)); /* No boost */ + hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF), + MAKE_WM8775_DATA(0xCF)); /* No boost */ + } else { + printk(KERN_ALERT "ctxfi: ERROR!!! Invalid input mux!!!\n"); + err = -EINVAL; + goto error; + } + + return 0; + +error: + hw20k2_i2c_uninit(hw); + return err; +} + +static int hw_have_digit_io_switch(struct hw *hw) +{ + return 0; +} + +static int hw_card_start(struct hw *hw) +{ + int err = 0; + struct pci_dev *pci = hw->pci; + unsigned int gctl; + + err = pci_enable_device(pci); + if (err < 0) + return err; + + /* Set DMA transfer mask */ + if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 || + pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) { + printk(KERN_ERR "ctxfi: architecture does not support PCI " + "busmaster DMA with mask 0x%llx\n", CT_XFI_DMA_MASK); + err = -ENXIO; + goto error1; + } + + err = pci_request_regions(pci, "XFi"); + if (err < 0) + goto error1; + + hw->io_base = pci_resource_start(hw->pci, 2); + hw->mem_base = (unsigned long)ioremap(hw->io_base, + pci_resource_len(hw->pci, 2)); + if (NULL == (void *)hw->mem_base) { + err = -ENOENT; + goto error2; + } + + /* Switch to 20k2 mode from UAA mode. */ + gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL); + set_field(&gctl, GCTL_UAA, 0); + hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl); + + /*if ((err = request_irq(pci->irq, ct_atc_interrupt, IRQF_SHARED, + atc->chip_details->nm_card, hw))) { + goto error3; + } + hw->irq = pci->irq; + */ + + pci_set_master(pci); + + return 0; + +/*error3: + iounmap((void *)hw->mem_base); + hw->mem_base = (unsigned long)NULL;*/ +error2: + pci_release_regions(pci); + hw->io_base = 0; +error1: + pci_disable_device(pci); + return err; +} + +static int hw_card_stop(struct hw *hw) +{ + /* TODO: Disable interrupt and so on... */ + return 0; +} + +static int hw_card_shutdown(struct hw *hw) +{ + if (hw->irq >= 0) + free_irq(hw->irq, hw); + + hw->irq = -1; + + if (NULL != ((void *)hw->mem_base)) + iounmap((void *)hw->mem_base); + + hw->mem_base = (unsigned long)NULL; + + if (hw->io_base) + pci_release_regions(hw->pci); + + hw->io_base = 0; + + pci_disable_device(hw->pci); + + return 0; +} + +static int hw_card_init(struct hw *hw, struct card_conf *info) +{ + int err; + unsigned int gctl; + u32 data = 0; + struct dac_conf dac_info = {0}; + struct adc_conf adc_info = {0}; + struct daio_conf daio_info = {0}; + struct trn_conf trn_info = {0}; + + /* Get PCI io port/memory base address and + * do 20kx core switch if needed. */ + if (!hw->io_base) { + err = hw_card_start(hw); + if (err) + return err; + } + + /* PLL init */ + err = hw_pll_init(hw, info->rsr); + if (err < 0) + return err; + + /* kick off auto-init */ + err = hw_auto_init(hw); + if (err < 0) + return err; + + gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL); + set_field(&gctl, GCTL_DBP, 1); + set_field(&gctl, GCTL_TBP, 1); + set_field(&gctl, GCTL_FBP, 1); + set_field(&gctl, GCTL_DPC, 0); + hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl); + + /* Reset all global pending interrupts */ + hw_write_20kx(hw, INTERRUPT_GIE, 0); + /* Reset all SRC pending interrupts */ + hw_write_20kx(hw, SRC_IP, 0); + + /* TODO: detect the card ID and configure GPIO accordingly. */ + /* Configures GPIO (0xD802 0x98028) */ + /*hw_write_20kx(hw, GPIO_CTRL, 0x7F07);*/ + /* Configures GPIO (SB0880) */ + /*hw_write_20kx(hw, GPIO_CTRL, 0xFF07);*/ + hw_write_20kx(hw, GPIO_CTRL, 0xD802); + + /* Enable audio ring */ + hw_write_20kx(hw, MIXER_AR_ENABLE, 0x01); + + trn_info.vm_pgt_phys = info->vm_pgt_phys; + err = hw_trn_init(hw, &trn_info); + if (err < 0) + return err; + + daio_info.msr = info->msr; + err = hw_daio_init(hw, &daio_info); + if (err < 0) + return err; + + dac_info.msr = info->msr; + err = hw_dac_init(hw, &dac_info); + if (err < 0) + return err; + + adc_info.msr = info->msr; + adc_info.input = ADC_LINEIN; + adc_info.mic20db = 0; + err = hw_adc_init(hw, &adc_info); + if (err < 0) + return err; + + data = hw_read_20kx(hw, SRC_MCTL); + data |= 0x1; /* Enables input from the audio ring */ + hw_write_20kx(hw, SRC_MCTL, data); + + return 0; +} + +static u32 hw_read_20kx(struct hw *hw, u32 reg) +{ + return readl((void *)(hw->mem_base + reg)); +} + +static void hw_write_20kx(struct hw *hw, u32 reg, u32 data) +{ + writel(data, (void *)(hw->mem_base + reg)); +} + +static struct hw ct20k2_preset __devinitdata = { + .irq = -1, + + .card_init = hw_card_init, + .card_stop = hw_card_stop, + .pll_init = hw_pll_init, + .is_adc_source_selected = hw_is_adc_input_selected, + .select_adc_source = hw_adc_input_select, + .have_digit_io_switch = hw_have_digit_io_switch, + + .src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk, + .src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk, + .src_mgr_get_ctrl_blk = src_mgr_get_ctrl_blk, + .src_mgr_put_ctrl_blk = src_mgr_put_ctrl_blk, + .src_set_state = src_set_state, + .src_set_bm = src_set_bm, + .src_set_rsr = src_set_rsr, + .src_set_sf = src_set_sf, + .src_set_wr = src_set_wr, + .src_set_pm = src_set_pm, + .src_set_rom = src_set_rom, + .src_set_vo = src_set_vo, + .src_set_st = src_set_st, + .src_set_ie = src_set_ie, + .src_set_ilsz = src_set_ilsz, + .src_set_bp = src_set_bp, + .src_set_cisz = src_set_cisz, + .src_set_ca = src_set_ca, + .src_set_sa = src_set_sa, + .src_set_la = src_set_la, + .src_set_pitch = src_set_pitch, + .src_set_dirty = src_set_dirty, + .src_set_clear_zbufs = src_set_clear_zbufs, + .src_set_dirty_all = src_set_dirty_all, + .src_commit_write = src_commit_write, + .src_get_ca = src_get_ca, + .src_get_dirty = src_get_dirty, + .src_dirty_conj_mask = src_dirty_conj_mask, + .src_mgr_enbs_src = src_mgr_enbs_src, + .src_mgr_enb_src = src_mgr_enb_src, + .src_mgr_dsb_src = src_mgr_dsb_src, + .src_mgr_commit_write = src_mgr_commit_write, + + .srcimp_mgr_get_ctrl_blk = srcimp_mgr_get_ctrl_blk, + .srcimp_mgr_put_ctrl_blk = srcimp_mgr_put_ctrl_blk, + .srcimp_mgr_set_imaparc = srcimp_mgr_set_imaparc, + .srcimp_mgr_set_imapuser = srcimp_mgr_set_imapuser, + .srcimp_mgr_set_imapnxt = srcimp_mgr_set_imapnxt, + .srcimp_mgr_set_imapaddr = srcimp_mgr_set_imapaddr, + .srcimp_mgr_commit_write = srcimp_mgr_commit_write, + + .amixer_rsc_get_ctrl_blk = amixer_rsc_get_ctrl_blk, + .amixer_rsc_put_ctrl_blk = amixer_rsc_put_ctrl_blk, + .amixer_mgr_get_ctrl_blk = amixer_mgr_get_ctrl_blk, + .amixer_mgr_put_ctrl_blk = amixer_mgr_put_ctrl_blk, + .amixer_set_mode = amixer_set_mode, + .amixer_set_iv = amixer_set_iv, + .amixer_set_x = amixer_set_x, + .amixer_set_y = amixer_set_y, + .amixer_set_sadr = amixer_set_sadr, + .amixer_set_se = amixer_set_se, + .amixer_set_dirty = amixer_set_dirty, + .amixer_set_dirty_all = amixer_set_dirty_all, + .amixer_commit_write = amixer_commit_write, + .amixer_get_y = amixer_get_y, + .amixer_get_dirty = amixer_get_dirty, + + .dai_get_ctrl_blk = dai_get_ctrl_blk, + .dai_put_ctrl_blk = dai_put_ctrl_blk, + .dai_srt_set_srco = dai_srt_set_srco, + .dai_srt_set_srcm = dai_srt_set_srcm, + .dai_srt_set_rsr = dai_srt_set_rsr, + .dai_srt_set_drat = dai_srt_set_drat, + .dai_srt_set_ec = dai_srt_set_ec, + .dai_srt_set_et = dai_srt_set_et, + .dai_commit_write = dai_commit_write, + + .dao_get_ctrl_blk = dao_get_ctrl_blk, + .dao_put_ctrl_blk = dao_put_ctrl_blk, + .dao_set_spos = dao_set_spos, + .dao_commit_write = dao_commit_write, + .dao_get_spos = dao_get_spos, + + .daio_mgr_get_ctrl_blk = daio_mgr_get_ctrl_blk, + .daio_mgr_put_ctrl_blk = daio_mgr_put_ctrl_blk, + .daio_mgr_enb_dai = daio_mgr_enb_dai, + .daio_mgr_dsb_dai = daio_mgr_dsb_dai, + .daio_mgr_enb_dao = daio_mgr_enb_dao, + .daio_mgr_dsb_dao = daio_mgr_dsb_dao, + .daio_mgr_dao_init = daio_mgr_dao_init, + .daio_mgr_set_imaparc = daio_mgr_set_imaparc, + .daio_mgr_set_imapnxt = daio_mgr_set_imapnxt, + .daio_mgr_set_imapaddr = daio_mgr_set_imapaddr, + .daio_mgr_commit_write = daio_mgr_commit_write, +}; + +int __devinit create_20k2_hw_obj(struct hw **rhw) +{ + struct hw20k2 *hw20k2; + + *rhw = NULL; + hw20k2 = kzalloc(sizeof(*hw20k2), GFP_KERNEL); + if (!hw20k2) + return -ENOMEM; + + hw20k2->hw = ct20k2_preset; + *rhw = &hw20k2->hw; + + return 0; +} + +int destroy_20k2_hw_obj(struct hw *hw) +{ + if (hw->io_base) + hw_card_shutdown(hw); + + kfree(hw); + return 0; +} diff --git a/sound/pci/ctxfi/cthw20k2.h b/sound/pci/ctxfi/cthw20k2.h new file mode 100644 index 0000000..d2b7daa --- /dev/null +++ b/sound/pci/ctxfi/cthw20k2.h @@ -0,0 +1,26 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File cthw20k2.h + * + * @Brief + * This file contains the definition of hardware access methord. + * + * @Author Liu Chun + * @Date May 13 2008 + * + */ + +#ifndef CTHW20K2_H +#define CTHW20K2_H + +#include "cthardware.h" + +int create_20k2_hw_obj(struct hw **rhw); +int destroy_20k2_hw_obj(struct hw *hw); + +#endif /* CTHW20K2_H */ diff --git a/sound/pci/ctxfi/ctimap.c b/sound/pci/ctxfi/ctimap.c new file mode 100644 index 0000000..0b73368 --- /dev/null +++ b/sound/pci/ctxfi/ctimap.c @@ -0,0 +1,112 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctimap.c + * + * @Brief + * This file contains the implementation of generic input mapper operations + * for input mapper management. + * + * @Author Liu Chun + * @Date May 23 2008 + * + */ + +#include "ctimap.h" +#include + +int input_mapper_add(struct list_head *mappers, struct imapper *entry, + int (*map_op)(void *, struct imapper *), void *data) +{ + struct list_head *pos, *pre, *head; + struct imapper *pre_ent, *pos_ent; + + head = mappers; + + if (list_empty(head)) { + entry->next = entry->addr; + map_op(data, entry); + list_add(&entry->list, head); + return 0; + } + + list_for_each(pos, head) { + pos_ent = list_entry(pos, struct imapper, list); + if (pos_ent->slot > entry->slot) { + /* found a position in list */ + break; + } + } + + if (pos != head) { + pre = pos->prev; + if (pre == head) + pre = head->prev; + + __list_add(&entry->list, pos->prev, pos); + } else { + pre = head->prev; + pos = head->next; + list_add_tail(&entry->list, head); + } + + pre_ent = list_entry(pre, struct imapper, list); + pos_ent = list_entry(pos, struct imapper, list); + + entry->next = pos_ent->addr; + map_op(data, entry); + pre_ent->next = entry->addr; + map_op(data, pre_ent); + + return 0; +} + +int input_mapper_delete(struct list_head *mappers, struct imapper *entry, + int (*map_op)(void *, struct imapper *), void *data) +{ + struct list_head *next, *pre, *head; + struct imapper *pre_ent, *next_ent; + + head = mappers; + + if (list_empty(head)) + return 0; + + pre = (entry->list.prev == head) ? head->prev : entry->list.prev; + next = (entry->list.next == head) ? head->next : entry->list.next; + + if (pre == &entry->list) { + /* entry is the only one node in mappers list */ + entry->next = entry->addr = entry->user = entry->slot = 0; + map_op(data, entry); + list_del(&entry->list); + return 0; + } + + pre_ent = list_entry(pre, struct imapper, list); + next_ent = list_entry(next, struct imapper, list); + + pre_ent->next = next_ent->addr; + map_op(data, pre_ent); + list_del(&entry->list); + + return 0; +} + +void free_input_mapper_list(struct list_head *head) +{ + struct imapper *entry; + struct list_head *pos; + + while (!list_empty(head)) { + pos = head->next; + list_del(pos); + entry = list_entry(pos, struct imapper, list); + kfree(entry); + } +} + diff --git a/sound/pci/ctxfi/ctimap.h b/sound/pci/ctxfi/ctimap.h new file mode 100644 index 0000000..53ccf9b --- /dev/null +++ b/sound/pci/ctxfi/ctimap.h @@ -0,0 +1,40 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctimap.h + * + * @Brief + * This file contains the definition of generic input mapper operations + * for input mapper management. + * + * @Author Liu Chun + * @Date May 23 2008 + * + */ + +#ifndef CTIMAP_H +#define CTIMAP_H + +#include + +struct imapper { + unsigned short slot; /* the id of the slot containing input data */ + unsigned short user; /* the id of the user resource consuming data */ + unsigned short addr; /* the input mapper ram id */ + unsigned short next; /* the next input mapper ram id */ + struct list_head list; +}; + +int input_mapper_add(struct list_head *mappers, struct imapper *entry, + int (*map_op)(void *, struct imapper *), void *data); + +int input_mapper_delete(struct list_head *mappers, struct imapper *entry, + int (*map_op)(void *, struct imapper *), void *data); + +void free_input_mapper_list(struct list_head *mappers); + +#endif /* CTIMAP_H */ diff --git a/sound/pci/ctxfi/ctmixer.c b/sound/pci/ctxfi/ctmixer.c new file mode 100644 index 0000000..666722d --- /dev/null +++ b/sound/pci/ctxfi/ctmixer.c @@ -0,0 +1,1123 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctmixer.c + * + * @Brief + * This file contains the implementation of alsa mixer device functions. + * + * @Author Liu Chun + * @Date May 28 2008 + * + */ + + +#include "ctmixer.h" +#include "ctamixer.h" +#include +#include +#include +#include +#include +#include + +enum CT_SUM_CTL { + SUM_IN_F, + SUM_IN_R, + SUM_IN_C, + SUM_IN_S, + SUM_IN_F_C, + + NUM_CT_SUMS +}; + +enum CT_AMIXER_CTL { + /* volume control mixers */ + AMIXER_MASTER_F, + AMIXER_MASTER_R, + AMIXER_MASTER_C, + AMIXER_MASTER_S, + AMIXER_PCM_F, + AMIXER_PCM_R, + AMIXER_PCM_C, + AMIXER_PCM_S, + AMIXER_SPDIFI, + AMIXER_LINEIN, + AMIXER_MIC, + AMIXER_SPDIFO, + AMIXER_WAVE_F, + AMIXER_WAVE_R, + AMIXER_WAVE_C, + AMIXER_WAVE_S, + AMIXER_MASTER_F_C, + AMIXER_PCM_F_C, + AMIXER_SPDIFI_C, + AMIXER_LINEIN_C, + AMIXER_MIC_C, + + /* this should always be the last one */ + NUM_CT_AMIXERS +}; + +enum CTALSA_MIXER_CTL { + /* volume control mixers */ + MIXER_MASTER_P, + MIXER_PCM_P, + MIXER_LINEIN_P, + MIXER_MIC_P, + MIXER_SPDIFI_P, + MIXER_SPDIFO_P, + MIXER_WAVEF_P, + MIXER_WAVER_P, + MIXER_WAVEC_P, + MIXER_WAVES_P, + MIXER_MASTER_C, + MIXER_PCM_C, + MIXER_LINEIN_C, + MIXER_MIC_C, + MIXER_SPDIFI_C, + + /* switch control mixers */ + MIXER_PCM_C_S, + MIXER_LINEIN_C_S, + MIXER_MIC_C_S, + MIXER_SPDIFI_C_S, + MIXER_LINEIN_P_S, + MIXER_SPDIFO_P_S, + MIXER_SPDIFI_P_S, + MIXER_WAVEF_P_S, + MIXER_WAVER_P_S, + MIXER_WAVEC_P_S, + MIXER_WAVES_P_S, + MIXER_DIGITAL_IO_S, + MIXER_IEC958_MASK, + MIXER_IEC958_DEFAULT, + MIXER_IEC958_STREAM, + + /* this should always be the last one */ + NUM_CTALSA_MIXERS +}; + +#define VOL_MIXER_START MIXER_MASTER_P +#define VOL_MIXER_END MIXER_SPDIFI_C +#define VOL_MIXER_NUM (VOL_MIXER_END - VOL_MIXER_START + 1) +#define SWH_MIXER_START MIXER_PCM_C_S +#define SWH_MIXER_END MIXER_DIGITAL_IO_S +#define SWH_CAPTURE_START MIXER_PCM_C_S +#define SWH_CAPTURE_END MIXER_SPDIFI_C_S + +#define CHN_NUM 2 + +struct ct_kcontrol_init { + unsigned char ctl; + char *name; +}; + +static struct ct_kcontrol_init +ct_kcontrol_init_table[NUM_CTALSA_MIXERS] = { + [MIXER_MASTER_P] = { + .ctl = 1, + .name = "Master Playback Volume", + }, + [MIXER_MASTER_C] = { + .ctl = 1, + .name = "Master Capture Volume", + }, + [MIXER_PCM_P] = { + .ctl = 1, + .name = "PCM Playback Volume", + }, + [MIXER_PCM_C] = { + .ctl = 1, + .name = "PCM Capture Volume", + }, + [MIXER_LINEIN_P] = { + .ctl = 1, + .name = "Line-in Playback Volume", + }, + [MIXER_LINEIN_C] = { + .ctl = 1, + .name = "Line-in Capture Volume", + }, + [MIXER_MIC_P] = { + .ctl = 1, + .name = "Mic Playback Volume", + }, + [MIXER_MIC_C] = { + .ctl = 1, + .name = "Mic Capture Volume", + }, + [MIXER_SPDIFI_P] = { + .ctl = 1, + .name = "S/PDIF-in Playback Volume", + }, + [MIXER_SPDIFI_C] = { + .ctl = 1, + .name = "S/PDIF-in Capture Volume", + }, + [MIXER_SPDIFO_P] = { + .ctl = 1, + .name = "S/PDIF-out Playback Volume", + }, + [MIXER_WAVEF_P] = { + .ctl = 1, + .name = "Front Playback Volume", + }, + [MIXER_WAVES_P] = { + .ctl = 1, + .name = "Side Playback Volume", + }, + [MIXER_WAVEC_P] = { + .ctl = 1, + .name = "Center/LFE Playback Volume", + }, + [MIXER_WAVER_P] = { + .ctl = 1, + .name = "Surround Playback Volume", + }, + + [MIXER_PCM_C_S] = { + .ctl = 1, + .name = "PCM Capture Switch", + }, + [MIXER_LINEIN_C_S] = { + .ctl = 1, + .name = "Line-in Capture Switch", + }, + [MIXER_MIC_C_S] = { + .ctl = 1, + .name = "Mic Capture Switch", + }, + [MIXER_SPDIFI_C_S] = { + .ctl = 1, + .name = "S/PDIF-in Capture Switch", + }, + [MIXER_LINEIN_P_S] = { + .ctl = 1, + .name = "Line-in Playback Switch", + }, + [MIXER_SPDIFO_P_S] = { + .ctl = 1, + .name = "S/PDIF-out Playback Switch", + }, + [MIXER_SPDIFI_P_S] = { + .ctl = 1, + .name = "S/PDIF-in Playback Switch", + }, + [MIXER_WAVEF_P_S] = { + .ctl = 1, + .name = "Front Playback Switch", + }, + [MIXER_WAVES_P_S] = { + .ctl = 1, + .name = "Side Playback Switch", + }, + [MIXER_WAVEC_P_S] = { + .ctl = 1, + .name = "Center/LFE Playback Switch", + }, + [MIXER_WAVER_P_S] = { + .ctl = 1, + .name = "Surround Playback Switch", + }, + [MIXER_DIGITAL_IO_S] = { + .ctl = 0, + .name = "Digit-IO Playback Switch", + }, +}; + +static void +ct_mixer_recording_select(struct ct_mixer *mixer, enum CT_AMIXER_CTL type); + +static void +ct_mixer_recording_unselect(struct ct_mixer *mixer, enum CT_AMIXER_CTL type); + +static struct snd_kcontrol *kctls[2] = {NULL}; + +static enum CT_AMIXER_CTL get_amixer_index(enum CTALSA_MIXER_CTL alsa_index) +{ + switch (alsa_index) { + case MIXER_MASTER_P: return AMIXER_MASTER_F; + case MIXER_MASTER_C: return AMIXER_MASTER_F_C; + case MIXER_PCM_P: return AMIXER_PCM_F; + case MIXER_PCM_C: + case MIXER_PCM_C_S: return AMIXER_PCM_F_C; + case MIXER_LINEIN_P: return AMIXER_LINEIN; + case MIXER_LINEIN_C: + case MIXER_LINEIN_C_S: return AMIXER_LINEIN_C; + case MIXER_MIC_P: return AMIXER_MIC; + case MIXER_MIC_C: + case MIXER_MIC_C_S: return AMIXER_MIC_C; + case MIXER_SPDIFI_P: return AMIXER_SPDIFI; + case MIXER_SPDIFI_C: + case MIXER_SPDIFI_C_S: return AMIXER_SPDIFI_C; + case MIXER_SPDIFO_P: return AMIXER_SPDIFO; + case MIXER_WAVEF_P: return AMIXER_WAVE_F; + case MIXER_WAVES_P: return AMIXER_WAVE_S; + case MIXER_WAVEC_P: return AMIXER_WAVE_C; + case MIXER_WAVER_P: return AMIXER_WAVE_R; + default: return NUM_CT_AMIXERS; + } +} + +static enum CT_AMIXER_CTL get_recording_amixer(enum CT_AMIXER_CTL index) +{ + switch (index) { + case AMIXER_MASTER_F: return AMIXER_MASTER_F_C; + case AMIXER_PCM_F: return AMIXER_PCM_F_C; + case AMIXER_SPDIFI: return AMIXER_SPDIFI_C; + case AMIXER_LINEIN: return AMIXER_LINEIN_C; + case AMIXER_MIC: return AMIXER_MIC_C; + default: return NUM_CT_AMIXERS; + } +} + +static unsigned char +get_switch_state(struct ct_mixer *mixer, enum CTALSA_MIXER_CTL type) +{ + return (mixer->switch_state & (0x1 << (type - SWH_MIXER_START))) + ? 1 : 0; +} + +static void +set_switch_state(struct ct_mixer *mixer, + enum CTALSA_MIXER_CTL type, unsigned char state) +{ + if (state) + mixer->switch_state |= (0x1 << (type - SWH_MIXER_START)); + else + mixer->switch_state &= ~(0x1 << (type - SWH_MIXER_START)); +} + +#if 0 /* not used */ +/* Map integer value ranging from 0 to 65535 to 14-bit float value ranging + * from 2^-6 to (1+1023/1024) */ +static unsigned int uint16_to_float14(unsigned int x) +{ + unsigned int i; + + if (x < 17) + return 0; + + x *= 2031; + x /= 65535; + x += 16; + + /* i <= 6 */ + for (i = 0; !(x & 0x400); i++) + x <<= 1; + + x = (((7 - i) & 0x7) << 10) | (x & 0x3ff); + + return x; +} + +static unsigned int float14_to_uint16(unsigned int x) +{ + unsigned int e; + + if (!x) + return x; + + e = (x >> 10) & 0x7; + x &= 0x3ff; + x += 1024; + x >>= (7 - e); + x -= 16; + x *= 65535; + x /= 2031; + + return x; +} +#endif /* not used */ + +#define VOL_SCALE 0x1c +#define VOL_MAX 0x100 + +static const DECLARE_TLV_DB_SCALE(ct_vol_db_scale, -6400, 25, 1); + +static int ct_alsa_mix_volume_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = VOL_MAX; + + return 0; +} + +static int ct_alsa_mix_volume_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct ct_atc *atc = snd_kcontrol_chip(kcontrol); + enum CT_AMIXER_CTL type = get_amixer_index(kcontrol->private_value); + struct amixer *amixer; + int i, val; + + for (i = 0; i < 2; i++) { + amixer = ((struct ct_mixer *)atc->mixer)-> + amixers[type*CHN_NUM+i]; + val = amixer->ops->get_scale(amixer) / VOL_SCALE; + if (val < 0) + val = 0; + else if (val > VOL_MAX) + val = VOL_MAX; + ucontrol->value.integer.value[i] = val; + } + + return 0; +} + +static int ct_alsa_mix_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct ct_atc *atc = snd_kcontrol_chip(kcontrol); + struct ct_mixer *mixer = atc->mixer; + enum CT_AMIXER_CTL type = get_amixer_index(kcontrol->private_value); + struct amixer *amixer; + int i, j, val, oval, change = 0; + + for (i = 0; i < 2; i++) { + val = ucontrol->value.integer.value[i]; + if (val < 0) + val = 0; + else if (val > VOL_MAX) + val = VOL_MAX; + val *= VOL_SCALE; + amixer = mixer->amixers[type*CHN_NUM+i]; + oval = amixer->ops->get_scale(amixer); + if (val != oval) { + amixer->ops->set_scale(amixer, val); + amixer->ops->commit_write(amixer); + change = 1; + /* Synchronize Master/PCM playback AMIXERs. */ + if (AMIXER_MASTER_F == type || AMIXER_PCM_F == type) { + for (j = 1; j < 4; j++) { + amixer = mixer-> + amixers[(type+j)*CHN_NUM+i]; + amixer->ops->set_scale(amixer, val); + amixer->ops->commit_write(amixer); + } + } + } + } + + return change; +} + +static struct snd_kcontrol_new vol_ctl = { + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = ct_alsa_mix_volume_info, + .get = ct_alsa_mix_volume_get, + .put = ct_alsa_mix_volume_put, + .tlv = { .p = ct_vol_db_scale }, +}; + +static void +do_line_mic_switch(struct ct_atc *atc, enum CTALSA_MIXER_CTL type) +{ + + if (MIXER_LINEIN_C_S == type) { + atc->select_line_in(atc); + set_switch_state(atc->mixer, MIXER_MIC_C_S, 0); + snd_ctl_notify(atc->card, SNDRV_CTL_EVENT_MASK_VALUE, + &kctls[1]->id); + } else if (MIXER_MIC_C_S == type) { + atc->select_mic_in(atc); + set_switch_state(atc->mixer, MIXER_LINEIN_C_S, 0); + snd_ctl_notify(atc->card, SNDRV_CTL_EVENT_MASK_VALUE, + &kctls[0]->id); + } +} + +static void +do_digit_io_switch(struct ct_atc *atc, int state) +{ + struct ct_mixer *mixer = atc->mixer; + + if (state) { + atc->select_digit_io(atc); + atc->spdif_out_unmute(atc, + get_switch_state(mixer, MIXER_SPDIFO_P_S)); + atc->spdif_in_unmute(atc, 1); + atc->line_in_unmute(atc, 0); + return; + } + + if (get_switch_state(mixer, MIXER_LINEIN_C_S)) + atc->select_line_in(atc); + else if (get_switch_state(mixer, MIXER_MIC_C_S)) + atc->select_mic_in(atc); + + atc->spdif_out_unmute(atc, 0); + atc->spdif_in_unmute(atc, 0); + atc->line_in_unmute(atc, 1); + return; +} + +static int ct_alsa_mix_switch_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + uinfo->value.integer.step = 1; + + return 0; +} + +static int ct_alsa_mix_switch_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct ct_mixer *mixer = + ((struct ct_atc *)snd_kcontrol_chip(kcontrol))->mixer; + enum CTALSA_MIXER_CTL type = kcontrol->private_value; + + ucontrol->value.integer.value[0] = get_switch_state(mixer, type); + return 0; +} + +static int ct_alsa_mix_switch_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct ct_atc *atc = snd_kcontrol_chip(kcontrol); + struct ct_mixer *mixer = atc->mixer; + enum CTALSA_MIXER_CTL type = kcontrol->private_value; + int state; + + state = ucontrol->value.integer.value[0]; + if (get_switch_state(mixer, type) == state) + return 0; + + set_switch_state(mixer, type, state); + /* Do changes in mixer. */ + if ((SWH_CAPTURE_START <= type) && (SWH_CAPTURE_END >= type)) { + if (state) { + ct_mixer_recording_select(mixer, + get_amixer_index(type)); + } else { + ct_mixer_recording_unselect(mixer, + get_amixer_index(type)); + } + } + /* Do changes out of mixer. */ + if (state && (MIXER_LINEIN_C_S == type || MIXER_MIC_C_S == type)) + do_line_mic_switch(atc, type); + else if (MIXER_WAVEF_P_S == type) + atc->line_front_unmute(atc, state); + else if (MIXER_WAVES_P_S == type) + atc->line_surround_unmute(atc, state); + else if (MIXER_WAVEC_P_S == type) + atc->line_clfe_unmute(atc, state); + else if (MIXER_WAVER_P_S == type) + atc->line_rear_unmute(atc, state); + else if (MIXER_LINEIN_P_S == type) + atc->line_in_unmute(atc, state); + else if (MIXER_SPDIFO_P_S == type) + atc->spdif_out_unmute(atc, state); + else if (MIXER_SPDIFI_P_S == type) + atc->spdif_in_unmute(atc, state); + else if (MIXER_DIGITAL_IO_S == type) + do_digit_io_switch(atc, state); + + return 1; +} + +static struct snd_kcontrol_new swh_ctl = { + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = ct_alsa_mix_switch_info, + .get = ct_alsa_mix_switch_get, + .put = ct_alsa_mix_switch_put +}; + +static int ct_spdif_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + return 0; +} + +static int ct_spdif_get_mask(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.iec958.status[0] = 0xff; + ucontrol->value.iec958.status[1] = 0xff; + ucontrol->value.iec958.status[2] = 0xff; + ucontrol->value.iec958.status[3] = 0xff; + return 0; +} + +static int ct_spdif_default_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + unsigned int status = SNDRV_PCM_DEFAULT_CON_SPDIF; + + ucontrol->value.iec958.status[0] = (status >> 0) & 0xff; + ucontrol->value.iec958.status[1] = (status >> 8) & 0xff; + ucontrol->value.iec958.status[2] = (status >> 16) & 0xff; + ucontrol->value.iec958.status[3] = (status >> 24) & 0xff; + + return 0; +} + +static int ct_spdif_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct ct_atc *atc = snd_kcontrol_chip(kcontrol); + unsigned int status; + + atc->spdif_out_get_status(atc, &status); + ucontrol->value.iec958.status[0] = (status >> 0) & 0xff; + ucontrol->value.iec958.status[1] = (status >> 8) & 0xff; + ucontrol->value.iec958.status[2] = (status >> 16) & 0xff; + ucontrol->value.iec958.status[3] = (status >> 24) & 0xff; + + return 0; +} + +static int ct_spdif_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct ct_atc *atc = snd_kcontrol_chip(kcontrol); + int change; + unsigned int status, old_status; + + status = (ucontrol->value.iec958.status[0] << 0) | + (ucontrol->value.iec958.status[1] << 8) | + (ucontrol->value.iec958.status[2] << 16) | + (ucontrol->value.iec958.status[3] << 24); + + atc->spdif_out_get_status(atc, &old_status); + change = (old_status != status); + if (change) + atc->spdif_out_set_status(atc, status); + + return change; +} + +static struct snd_kcontrol_new iec958_mask_ctl = { + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK), + .count = 1, + .info = ct_spdif_info, + .get = ct_spdif_get_mask, + .private_value = MIXER_IEC958_MASK +}; + +static struct snd_kcontrol_new iec958_default_ctl = { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), + .count = 1, + .info = ct_spdif_info, + .get = ct_spdif_default_get, + .put = ct_spdif_put, + .private_value = MIXER_IEC958_DEFAULT +}; + +static struct snd_kcontrol_new iec958_ctl = { + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM), + .count = 1, + .info = ct_spdif_info, + .get = ct_spdif_get, + .put = ct_spdif_put, + .private_value = MIXER_IEC958_STREAM +}; + +#define NUM_IEC958_CTL 3 + +static int +ct_mixer_kcontrol_new(struct ct_mixer *mixer, struct snd_kcontrol_new *new) +{ + struct snd_kcontrol *kctl; + int err; + + kctl = snd_ctl_new1(new, mixer->atc); + if (NULL == kctl) + return -ENOMEM; + + if (SNDRV_CTL_ELEM_IFACE_PCM == kctl->id.iface) + kctl->id.device = IEC958; + + err = snd_ctl_add(mixer->atc->card, kctl); + if (err) + return err; + + switch (new->private_value) { + case MIXER_LINEIN_C_S: + kctls[0] = kctl; break; + case MIXER_MIC_C_S: + kctls[1] = kctl; break; + default: + break; + } + + return 0; +} + +static int ct_mixer_kcontrols_create(struct ct_mixer *mixer) +{ + enum CTALSA_MIXER_CTL type; + struct ct_atc *atc = mixer->atc; + int err; + + /* Create snd kcontrol instances on demand */ + for (type = VOL_MIXER_START; type <= VOL_MIXER_END; type++) { + if (ct_kcontrol_init_table[type].ctl) { + vol_ctl.name = ct_kcontrol_init_table[type].name; + vol_ctl.private_value = (unsigned long)type; + err = ct_mixer_kcontrol_new(mixer, &vol_ctl); + if (err) + return err; + } + } + + ct_kcontrol_init_table[MIXER_DIGITAL_IO_S].ctl = + atc->have_digit_io_switch(atc); + for (type = SWH_MIXER_START; type <= SWH_MIXER_END; type++) { + if (ct_kcontrol_init_table[type].ctl) { + swh_ctl.name = ct_kcontrol_init_table[type].name; + swh_ctl.private_value = (unsigned long)type; + err = ct_mixer_kcontrol_new(mixer, &swh_ctl); + if (err) + return err; + } + } + + err = ct_mixer_kcontrol_new(mixer, &iec958_mask_ctl); + if (err) + return err; + + err = ct_mixer_kcontrol_new(mixer, &iec958_default_ctl); + if (err) + return err; + + err = ct_mixer_kcontrol_new(mixer, &iec958_ctl); + if (err) + return err; + + atc->line_front_unmute(atc, 1); + set_switch_state(mixer, MIXER_WAVEF_P_S, 1); + atc->line_surround_unmute(atc, 0); + set_switch_state(mixer, MIXER_WAVES_P_S, 0); + atc->line_clfe_unmute(atc, 0); + set_switch_state(mixer, MIXER_WAVEC_P_S, 0); + atc->line_rear_unmute(atc, 0); + set_switch_state(mixer, MIXER_WAVER_P_S, 0); + atc->spdif_out_unmute(atc, 0); + set_switch_state(mixer, MIXER_SPDIFO_P_S, 0); + atc->line_in_unmute(atc, 0); + set_switch_state(mixer, MIXER_LINEIN_P_S, 0); + atc->spdif_in_unmute(atc, 0); + set_switch_state(mixer, MIXER_SPDIFI_P_S, 0); + + set_switch_state(mixer, MIXER_PCM_C_S, 1); + set_switch_state(mixer, MIXER_LINEIN_C_S, 1); + set_switch_state(mixer, MIXER_SPDIFI_C_S, 1); + + return 0; +} + +static void +ct_mixer_recording_select(struct ct_mixer *mixer, enum CT_AMIXER_CTL type) +{ + struct amixer *amix_d; + struct sum *sum_c; + int i; + + for (i = 0; i < 2; i++) { + amix_d = mixer->amixers[type*CHN_NUM+i]; + sum_c = mixer->sums[SUM_IN_F_C*CHN_NUM+i]; + amix_d->ops->set_sum(amix_d, sum_c); + amix_d->ops->commit_write(amix_d); + } +} + +static void +ct_mixer_recording_unselect(struct ct_mixer *mixer, enum CT_AMIXER_CTL type) +{ + struct amixer *amix_d; + int i; + + for (i = 0; i < 2; i++) { + amix_d = mixer->amixers[type*CHN_NUM+i]; + amix_d->ops->set_sum(amix_d, NULL); + amix_d->ops->commit_write(amix_d); + } +} + +static int ct_mixer_get_resources(struct ct_mixer *mixer) +{ + struct sum_mgr *sum_mgr; + struct sum *sum; + struct sum_desc sum_desc = {0}; + struct amixer_mgr *amixer_mgr; + struct amixer *amixer; + struct amixer_desc am_desc = {0}; + int err; + int i; + + /* Allocate sum resources for mixer obj */ + sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM]; + sum_desc.msr = mixer->atc->msr; + for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) { + err = sum_mgr->get_sum(sum_mgr, &sum_desc, &sum); + if (err) { + printk(KERN_ERR "ctxfi:Failed to get sum resources for " + "front output!\n"); + break; + } + mixer->sums[i] = sum; + } + if (err) + goto error1; + + /* Allocate amixer resources for mixer obj */ + amixer_mgr = (struct amixer_mgr *)mixer->atc->rsc_mgrs[AMIXER]; + am_desc.msr = mixer->atc->msr; + for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) { + err = amixer_mgr->get_amixer(amixer_mgr, &am_desc, &amixer); + if (err) { + printk(KERN_ERR "ctxfi:Failed to get amixer resources " + "for mixer obj!\n"); + break; + } + mixer->amixers[i] = amixer; + } + if (err) + goto error2; + + return 0; + +error2: + for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) { + if (NULL != mixer->amixers[i]) { + amixer = mixer->amixers[i]; + amixer_mgr->put_amixer(amixer_mgr, amixer); + mixer->amixers[i] = NULL; + } + } +error1: + for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) { + if (NULL != mixer->sums[i]) { + sum_mgr->put_sum(sum_mgr, (struct sum *)mixer->sums[i]); + mixer->sums[i] = NULL; + } + } + + return err; +} + +static int ct_mixer_get_mem(struct ct_mixer **rmixer) +{ + struct ct_mixer *mixer; + int err; + + *rmixer = NULL; + /* Allocate mem for mixer obj */ + mixer = kzalloc(sizeof(*mixer), GFP_KERNEL); + if (NULL == mixer) + return -ENOMEM; + + mixer->amixers = kzalloc(sizeof(void *)*(NUM_CT_AMIXERS*CHN_NUM), + GFP_KERNEL); + if (NULL == mixer->amixers) { + err = -ENOMEM; + goto error1; + } + mixer->sums = kzalloc(sizeof(void *)*(NUM_CT_SUMS*CHN_NUM), GFP_KERNEL); + if (NULL == mixer->sums) { + err = -ENOMEM; + goto error2; + } + + *rmixer = mixer; + return 0; + +error2: + kfree(mixer->amixers); +error1: + kfree(mixer); + return err; +} + +static int ct_mixer_topology_build(struct ct_mixer *mixer) +{ + struct sum *sum; + struct amixer *amix_d, *amix_s; + enum CT_AMIXER_CTL i, j; + + /* Build topology from destination to source */ + + /* Set up Master mixer */ + for (i = AMIXER_MASTER_F, j = SUM_IN_F; + i <= AMIXER_MASTER_S; i++, j++) { + amix_d = mixer->amixers[i*CHN_NUM]; + sum = mixer->sums[j*CHN_NUM]; + amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL); + amix_d = mixer->amixers[i*CHN_NUM+1]; + sum = mixer->sums[j*CHN_NUM+1]; + amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL); + } + + /* Set up Wave-out mixer */ + for (i = AMIXER_WAVE_F, j = AMIXER_MASTER_F; + i <= AMIXER_WAVE_S; i++, j++) { + amix_d = mixer->amixers[i*CHN_NUM]; + amix_s = mixer->amixers[j*CHN_NUM]; + amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL); + amix_d = mixer->amixers[i*CHN_NUM+1]; + amix_s = mixer->amixers[j*CHN_NUM+1]; + amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL); + } + + /* Set up S/PDIF-out mixer */ + amix_d = mixer->amixers[AMIXER_SPDIFO*CHN_NUM]; + amix_s = mixer->amixers[AMIXER_MASTER_F*CHN_NUM]; + amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL); + amix_d = mixer->amixers[AMIXER_SPDIFO*CHN_NUM+1]; + amix_s = mixer->amixers[AMIXER_MASTER_F*CHN_NUM+1]; + amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL); + + /* Set up PCM-in mixer */ + for (i = AMIXER_PCM_F, j = SUM_IN_F; i <= AMIXER_PCM_S; i++, j++) { + amix_d = mixer->amixers[i*CHN_NUM]; + sum = mixer->sums[j*CHN_NUM]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + amix_d = mixer->amixers[i*CHN_NUM+1]; + sum = mixer->sums[j*CHN_NUM+1]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + } + + /* Set up Line-in mixer */ + amix_d = mixer->amixers[AMIXER_LINEIN*CHN_NUM]; + sum = mixer->sums[SUM_IN_F*CHN_NUM]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + amix_d = mixer->amixers[AMIXER_LINEIN*CHN_NUM+1]; + sum = mixer->sums[SUM_IN_F*CHN_NUM+1]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + + /* Set up Mic-in mixer */ + amix_d = mixer->amixers[AMIXER_MIC*CHN_NUM]; + sum = mixer->sums[SUM_IN_F*CHN_NUM]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + amix_d = mixer->amixers[AMIXER_MIC*CHN_NUM+1]; + sum = mixer->sums[SUM_IN_F*CHN_NUM+1]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + + /* Set up S/PDIF-in mixer */ + amix_d = mixer->amixers[AMIXER_SPDIFI*CHN_NUM]; + sum = mixer->sums[SUM_IN_F*CHN_NUM]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + amix_d = mixer->amixers[AMIXER_SPDIFI*CHN_NUM+1]; + sum = mixer->sums[SUM_IN_F*CHN_NUM+1]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + + /* Set up Master recording mixer */ + amix_d = mixer->amixers[AMIXER_MASTER_F_C*CHN_NUM]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM]; + amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL); + amix_d = mixer->amixers[AMIXER_MASTER_F_C*CHN_NUM+1]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1]; + amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL); + + /* Set up PCM-in recording mixer */ + amix_d = mixer->amixers[AMIXER_PCM_F_C*CHN_NUM]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + amix_d = mixer->amixers[AMIXER_PCM_F_C*CHN_NUM+1]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + + /* Set up Line-in recording mixer */ + amix_d = mixer->amixers[AMIXER_LINEIN_C*CHN_NUM]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + amix_d = mixer->amixers[AMIXER_LINEIN_C*CHN_NUM+1]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + + /* Set up Mic-in recording mixer */ + amix_d = mixer->amixers[AMIXER_MIC_C*CHN_NUM]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + amix_d = mixer->amixers[AMIXER_MIC_C*CHN_NUM+1]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + + /* Set up S/PDIF-in recording mixer */ + amix_d = mixer->amixers[AMIXER_SPDIFI_C*CHN_NUM]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + amix_d = mixer->amixers[AMIXER_SPDIFI_C*CHN_NUM+1]; + sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1]; + amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum); + + return 0; +} + +static int mixer_set_input_port(struct amixer *amixer, struct rsc *rsc) +{ + amixer->ops->set_input(amixer, rsc); + amixer->ops->commit_write(amixer); + + return 0; +} + +static enum CT_AMIXER_CTL port_to_amixer(enum MIXER_PORT_T type) +{ + switch (type) { + case MIX_WAVE_FRONT: return AMIXER_WAVE_F; + case MIX_WAVE_SURROUND: return AMIXER_WAVE_S; + case MIX_WAVE_CENTLFE: return AMIXER_WAVE_C; + case MIX_WAVE_REAR: return AMIXER_WAVE_R; + case MIX_PCMO_FRONT: return AMIXER_MASTER_F_C; + case MIX_SPDIF_OUT: return AMIXER_SPDIFO; + case MIX_LINE_IN: return AMIXER_LINEIN; + case MIX_MIC_IN: return AMIXER_MIC; + case MIX_SPDIF_IN: return AMIXER_SPDIFI; + case MIX_PCMI_FRONT: return AMIXER_PCM_F; + case MIX_PCMI_SURROUND: return AMIXER_PCM_S; + case MIX_PCMI_CENTLFE: return AMIXER_PCM_C; + case MIX_PCMI_REAR: return AMIXER_PCM_R; + default: return 0; + } +} + +static int mixer_get_output_ports(struct ct_mixer *mixer, + enum MIXER_PORT_T type, + struct rsc **rleft, struct rsc **rright) +{ + enum CT_AMIXER_CTL amix = port_to_amixer(type); + + if (NULL != rleft) + *rleft = &((struct amixer *)mixer->amixers[amix*CHN_NUM])->rsc; + + if (NULL != rright) + *rright = + &((struct amixer *)mixer->amixers[amix*CHN_NUM+1])->rsc; + + return 0; +} + +static int mixer_set_input_left(struct ct_mixer *mixer, + enum MIXER_PORT_T type, struct rsc *rsc) +{ + enum CT_AMIXER_CTL amix = port_to_amixer(type); + + mixer_set_input_port(mixer->amixers[amix*CHN_NUM], rsc); + amix = get_recording_amixer(amix); + if (amix < NUM_CT_AMIXERS) + mixer_set_input_port(mixer->amixers[amix*CHN_NUM], rsc); + + return 0; +} + +static int +mixer_set_input_right(struct ct_mixer *mixer, + enum MIXER_PORT_T type, struct rsc *rsc) +{ + enum CT_AMIXER_CTL amix = port_to_amixer(type); + + mixer_set_input_port(mixer->amixers[amix*CHN_NUM+1], rsc); + amix = get_recording_amixer(amix); + if (amix < NUM_CT_AMIXERS) + mixer_set_input_port(mixer->amixers[amix*CHN_NUM+1], rsc); + + return 0; +} + +int ct_mixer_destroy(struct ct_mixer *mixer) +{ + struct sum_mgr *sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM]; + struct amixer_mgr *amixer_mgr = + (struct amixer_mgr *)mixer->atc->rsc_mgrs[AMIXER]; + struct amixer *amixer; + int i = 0; + + /* Release amixer resources */ + for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) { + if (NULL != mixer->amixers[i]) { + amixer = mixer->amixers[i]; + amixer_mgr->put_amixer(amixer_mgr, amixer); + } + } + + /* Release sum resources */ + for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) { + if (NULL != mixer->sums[i]) + sum_mgr->put_sum(sum_mgr, (struct sum *)mixer->sums[i]); + } + + /* Release mem assigned to mixer object */ + kfree(mixer->sums); + kfree(mixer->amixers); + kfree(mixer); + + return 0; +} + +int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer) +{ + struct ct_mixer *mixer; + int err; + + *rmixer = NULL; + + /* Allocate mem for mixer obj */ + err = ct_mixer_get_mem(&mixer); + if (err) + return err; + + mixer->switch_state = 0; + mixer->atc = atc; + /* Set operations */ + mixer->get_output_ports = mixer_get_output_ports; + mixer->set_input_left = mixer_set_input_left; + mixer->set_input_right = mixer_set_input_right; + + /* Allocate chip resources for mixer obj */ + err = ct_mixer_get_resources(mixer); + if (err) + goto error; + + /* Build internal mixer topology */ + ct_mixer_topology_build(mixer); + + *rmixer = mixer; + + return 0; + +error: + ct_mixer_destroy(mixer); + return err; +} + +int ct_alsa_mix_create(struct ct_atc *atc, + enum CTALSADEVS device, + const char *device_name) +{ + int err; + + /* Create snd kcontrol instances on demand */ + /* vol_ctl.device = swh_ctl.device = device; */ /* better w/ device 0 */ + err = ct_mixer_kcontrols_create((struct ct_mixer *)atc->mixer); + if (err) + return err; + + strcpy(atc->card->mixername, device_name); + + return 0; +} diff --git a/sound/pci/ctxfi/ctmixer.h b/sound/pci/ctxfi/ctmixer.h new file mode 100644 index 0000000..e2d96eb --- /dev/null +++ b/sound/pci/ctxfi/ctmixer.h @@ -0,0 +1,67 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctmixer.h + * + * @Brief + * This file contains the definition of the mixer device functions. + * + * @Author Liu Chun + * @Date Mar 28 2008 + * + */ + +#ifndef CTMIXER_H +#define CTMIXER_H + +#include "ctatc.h" +#include "ctresource.h" + +#define INIT_VOL 0x1c00 + +enum MIXER_PORT_T { + MIX_WAVE_FRONT, + MIX_WAVE_REAR, + MIX_WAVE_CENTLFE, + MIX_WAVE_SURROUND, + MIX_SPDIF_OUT, + MIX_PCMO_FRONT, + MIX_MIC_IN, + MIX_LINE_IN, + MIX_SPDIF_IN, + MIX_PCMI_FRONT, + MIX_PCMI_REAR, + MIX_PCMI_CENTLFE, + MIX_PCMI_SURROUND, + + NUM_MIX_PORTS +}; + +/* alsa mixer descriptor */ +struct ct_mixer { + struct ct_atc *atc; + + void **amixers; /* amixer resources for volume control */ + void **sums; /* sum resources for signal collection */ + unsigned int switch_state; /* A bit-map to indicate state of switches */ + + int (*get_output_ports)(struct ct_mixer *mixer, enum MIXER_PORT_T type, + struct rsc **rleft, struct rsc **rright); + + int (*set_input_left)(struct ct_mixer *mixer, + enum MIXER_PORT_T type, struct rsc *rsc); + int (*set_input_right)(struct ct_mixer *mixer, + enum MIXER_PORT_T type, struct rsc *rsc); +}; + +int ct_alsa_mix_create(struct ct_atc *atc, + enum CTALSADEVS device, + const char *device_name); +int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer); +int ct_mixer_destroy(struct ct_mixer *mixer); + +#endif /* CTMIXER_H */ diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c new file mode 100644 index 0000000..9e5c0c4 --- /dev/null +++ b/sound/pci/ctxfi/ctpcm.c @@ -0,0 +1,426 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctpcm.c + * + * @Brief + * This file contains the definition of the pcm device functions. + * + * @Author Liu Chun + * @Date Apr 2 2008 + * + */ + +#include "ctpcm.h" +#include "cttimer.h" +#include + +/* Hardware descriptions for playback */ +static struct snd_pcm_hardware ct_pcm_playback_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE), + .formats = (SNDRV_PCM_FMTBIT_U8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_3LE | + SNDRV_PCM_FMTBIT_S32_LE | + SNDRV_PCM_FMTBIT_FLOAT_LE), + .rates = (SNDRV_PCM_RATE_CONTINUOUS | + SNDRV_PCM_RATE_8000_192000), + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = (128*1024), + .period_bytes_min = (64), + .period_bytes_max = (128*1024), + .periods_min = 2, + .periods_max = 1024, + .fifo_size = 0, +}; + +static struct snd_pcm_hardware ct_spdif_passthru_playback_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = (SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_32000), + .rate_min = 32000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = (128*1024), + .period_bytes_min = (64), + .period_bytes_max = (128*1024), + .periods_min = 2, + .periods_max = 1024, + .fifo_size = 0, +}; + +/* Hardware descriptions for capture */ +static struct snd_pcm_hardware ct_pcm_capture_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_MMAP_VALID), + .formats = (SNDRV_PCM_FMTBIT_U8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_3LE | + SNDRV_PCM_FMTBIT_S32_LE | + SNDRV_PCM_FMTBIT_FLOAT_LE), + .rates = (SNDRV_PCM_RATE_CONTINUOUS | + SNDRV_PCM_RATE_8000_96000), + .rate_min = 8000, + .rate_max = 96000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = (128*1024), + .period_bytes_min = (384), + .period_bytes_max = (64*1024), + .periods_min = 2, + .periods_max = 1024, + .fifo_size = 0, +}; + +static void ct_atc_pcm_interrupt(struct ct_atc_pcm *atc_pcm) +{ + struct ct_atc_pcm *apcm = atc_pcm; + + if (NULL == apcm->substream) + return; + + snd_pcm_period_elapsed(apcm->substream); +} + +static void ct_atc_pcm_free_substream(struct snd_pcm_runtime *runtime) +{ + struct ct_atc_pcm *apcm = runtime->private_data; + struct ct_atc *atc = snd_pcm_substream_chip(apcm->substream); + + atc->pcm_release_resources(atc, apcm); + ct_timer_instance_free(apcm->timer); + kfree(apcm); + runtime->private_data = NULL; +} + +/* pcm playback operations */ +static int ct_pcm_playback_open(struct snd_pcm_substream *substream) +{ + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm; + int err; + + apcm = kzalloc(sizeof(*apcm), GFP_KERNEL); + if (NULL == apcm) + return -ENOMEM; + + apcm->substream = substream; + apcm->interrupt = ct_atc_pcm_interrupt; + runtime->private_data = apcm; + runtime->private_free = ct_atc_pcm_free_substream; + if (IEC958 == substream->pcm->device) { + runtime->hw = ct_spdif_passthru_playback_hw; + atc->spdif_out_passthru(atc, 1); + } else { + runtime->hw = ct_pcm_playback_hw; + if (FRONT == substream->pcm->device) + runtime->hw.channels_max = 8; + } + + err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) { + kfree(apcm); + return err; + } + err = snd_pcm_hw_constraint_minmax(runtime, + SNDRV_PCM_HW_PARAM_BUFFER_BYTES, + 1024, UINT_MAX); + if (err < 0) { + kfree(apcm); + return err; + } + + apcm->timer = ct_timer_instance_new(atc->timer, apcm); + if (!apcm->timer) + return -ENOMEM; + + return 0; +} + +static int ct_pcm_playback_close(struct snd_pcm_substream *substream) +{ + struct ct_atc *atc = snd_pcm_substream_chip(substream); + + /* TODO: Notify mixer inactive. */ + if (IEC958 == substream->pcm->device) + atc->spdif_out_passthru(atc, 0); + + /* The ct_atc_pcm object will be freed by runtime->private_free */ + + return 0; +} + +static int ct_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct ct_atc_pcm *apcm = substream->runtime->private_data; + int err; + + err = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; + /* clear previous resources */ + atc->pcm_release_resources(atc, apcm); + return err; +} + +static int ct_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct ct_atc_pcm *apcm = substream->runtime->private_data; + + /* clear previous resources */ + atc->pcm_release_resources(atc, apcm); + /* Free snd-allocated pages */ + return snd_pcm_lib_free_pages(substream); +} + + +static int ct_pcm_playback_prepare(struct snd_pcm_substream *substream) +{ + int err; + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm = runtime->private_data; + + if (IEC958 == substream->pcm->device) + err = atc->spdif_passthru_playback_prepare(atc, apcm); + else + err = atc->pcm_playback_prepare(atc, apcm); + + if (err < 0) { + printk(KERN_ERR "ctxfi: Preparing pcm playback failed!!!\n"); + return err; + } + + return 0; +} + +static int +ct_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm = runtime->private_data; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + atc->pcm_playback_start(atc, apcm); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + atc->pcm_playback_stop(atc, apcm); + break; + default: + break; + } + + return 0; +} + +static snd_pcm_uframes_t +ct_pcm_playback_pointer(struct snd_pcm_substream *substream) +{ + unsigned long position; + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm = runtime->private_data; + + /* Read out playback position */ + position = atc->pcm_playback_position(atc, apcm); + position = bytes_to_frames(runtime, position); + if (position >= runtime->buffer_size) + position = 0; + return position; +} + +/* pcm capture operations */ +static int ct_pcm_capture_open(struct snd_pcm_substream *substream) +{ + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm; + int err; + + apcm = kzalloc(sizeof(*apcm), GFP_KERNEL); + if (NULL == apcm) + return -ENOMEM; + + apcm->started = 0; + apcm->substream = substream; + apcm->interrupt = ct_atc_pcm_interrupt; + runtime->private_data = apcm; + runtime->private_free = ct_atc_pcm_free_substream; + runtime->hw = ct_pcm_capture_hw; + runtime->hw.rate_max = atc->rsr * atc->msr; + + err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) { + kfree(apcm); + return err; + } + err = snd_pcm_hw_constraint_minmax(runtime, + SNDRV_PCM_HW_PARAM_BUFFER_BYTES, + 1024, UINT_MAX); + if (err < 0) { + kfree(apcm); + return err; + } + + apcm->timer = ct_timer_instance_new(atc->timer, apcm); + if (!apcm->timer) + return -ENOMEM; + + return 0; +} + +static int ct_pcm_capture_close(struct snd_pcm_substream *substream) +{ + /* The ct_atc_pcm object will be freed by runtime->private_free */ + /* TODO: Notify mixer inactive. */ + return 0; +} + +static int ct_pcm_capture_prepare(struct snd_pcm_substream *substream) +{ + int err; + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm = runtime->private_data; + + err = atc->pcm_capture_prepare(atc, apcm); + if (err < 0) { + printk(KERN_ERR "ctxfi: Preparing pcm capture failed!!!\n"); + return err; + } + + return 0; +} + +static int +ct_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm = runtime->private_data; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + atc->pcm_capture_start(atc, apcm); + break; + case SNDRV_PCM_TRIGGER_STOP: + atc->pcm_capture_stop(atc, apcm); + break; + default: + atc->pcm_capture_stop(atc, apcm); + break; + } + + return 0; +} + +static snd_pcm_uframes_t +ct_pcm_capture_pointer(struct snd_pcm_substream *substream) +{ + unsigned long position; + struct ct_atc *atc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm = runtime->private_data; + + /* Read out playback position */ + position = atc->pcm_capture_position(atc, apcm); + position = bytes_to_frames(runtime, position); + if (position >= runtime->buffer_size) + position = 0; + return position; +} + +/* PCM operators for playback */ +static struct snd_pcm_ops ct_pcm_playback_ops = { + .open = ct_pcm_playback_open, + .close = ct_pcm_playback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = ct_pcm_hw_params, + .hw_free = ct_pcm_hw_free, + .prepare = ct_pcm_playback_prepare, + .trigger = ct_pcm_playback_trigger, + .pointer = ct_pcm_playback_pointer, + .page = snd_pcm_sgbuf_ops_page, +}; + +/* PCM operators for capture */ +static struct snd_pcm_ops ct_pcm_capture_ops = { + .open = ct_pcm_capture_open, + .close = ct_pcm_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = ct_pcm_hw_params, + .hw_free = ct_pcm_hw_free, + .prepare = ct_pcm_capture_prepare, + .trigger = ct_pcm_capture_trigger, + .pointer = ct_pcm_capture_pointer, + .page = snd_pcm_sgbuf_ops_page, +}; + +/* Create ALSA pcm device */ +int ct_alsa_pcm_create(struct ct_atc *atc, + enum CTALSADEVS device, + const char *device_name) +{ + struct snd_pcm *pcm; + int err; + int playback_count, capture_count; + + playback_count = (IEC958 == device) ? 1 : 8; + capture_count = (FRONT == device) ? 1 : 0; + err = snd_pcm_new(atc->card, "ctxfi", device, + playback_count, capture_count, &pcm); + if (err < 0) { + printk(KERN_ERR "ctxfi: snd_pcm_new failed!! Err=%d\n", err); + return err; + } + + pcm->private_data = atc; + pcm->info_flags = 0; + pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX; + strlcpy(pcm->name, device_name, sizeof(pcm->name)); + + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &ct_pcm_playback_ops); + + if (FRONT == device) + snd_pcm_set_ops(pcm, + SNDRV_PCM_STREAM_CAPTURE, &ct_pcm_capture_ops); + + snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG, + snd_dma_pci_data(atc->pci), 128*1024, 128*1024); + + return 0; +} diff --git a/sound/pci/ctxfi/ctpcm.h b/sound/pci/ctxfi/ctpcm.h new file mode 100644 index 0000000..178da0d --- /dev/null +++ b/sound/pci/ctxfi/ctpcm.h @@ -0,0 +1,27 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctpcm.h + * + * @Brief + * This file contains the definition of the pcm device functions. + * + * @Author Liu Chun + * @Date Mar 28 2008 + * + */ + +#ifndef CTPCM_H +#define CTPCM_H + +#include "ctatc.h" + +int ct_alsa_pcm_create(struct ct_atc *atc, + enum CTALSADEVS device, + const char *device_name); + +#endif /* CTPCM_H */ diff --git a/sound/pci/ctxfi/ctresource.c b/sound/pci/ctxfi/ctresource.c new file mode 100644 index 0000000..889c495 --- /dev/null +++ b/sound/pci/ctxfi/ctresource.c @@ -0,0 +1,301 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctresource.c + * + * @Brief + * This file contains the implementation of some generic helper functions. + * + * @Author Liu Chun + * @Date May 15 2008 + * + */ + +#include "ctresource.h" +#include "cthardware.h" +#include +#include + +#define AUDIO_SLOT_BLOCK_NUM 256 + +/* Resource allocation based on bit-map management mechanism */ +static int +get_resource(u8 *rscs, unsigned int amount, + unsigned int multi, unsigned int *ridx) +{ + int i, j, k, n; + + /* Check whether there are sufficient resources to meet request. */ + for (i = 0, n = multi; i < amount; i++) { + j = i / 8; + k = i % 8; + if (rscs[j] & ((u8)1 << k)) { + n = multi; + continue; + } + if (!(--n)) + break; /* found sufficient contiguous resources */ + } + + if (i >= amount) { + /* Can not find sufficient contiguous resources */ + return -ENOENT; + } + + /* Mark the contiguous bits in resource bit-map as used */ + for (n = multi; n > 0; n--) { + j = i / 8; + k = i % 8; + rscs[j] |= ((u8)1 << k); + i--; + } + + *ridx = i + 1; + + return 0; +} + +static int put_resource(u8 *rscs, unsigned int multi, unsigned int idx) +{ + unsigned int i, j, k, n; + + /* Mark the contiguous bits in resource bit-map as used */ + for (n = multi, i = idx; n > 0; n--) { + j = i / 8; + k = i % 8; + rscs[j] &= ~((u8)1 << k); + i++; + } + + return 0; +} + +int mgr_get_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int *ridx) +{ + int err; + + if (n > mgr->avail) + return -ENOENT; + + err = get_resource(mgr->rscs, mgr->amount, n, ridx); + if (!err) + mgr->avail -= n; + + return err; +} + +int mgr_put_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int idx) +{ + put_resource(mgr->rscs, n, idx); + mgr->avail += n; + + return 0; +} + +static unsigned char offset_in_audio_slot_block[NUM_RSCTYP] = { + /* SRC channel is at Audio Ring slot 1 every 16 slots. */ + [SRC] = 0x1, + [AMIXER] = 0x4, + [SUM] = 0xc, +}; + +static int rsc_index(const struct rsc *rsc) +{ + return rsc->conj; +} + +static int audio_ring_slot(const struct rsc *rsc) +{ + return (rsc->conj << 4) + offset_in_audio_slot_block[rsc->type]; +} + +static int rsc_next_conj(struct rsc *rsc) +{ + unsigned int i; + for (i = 0; (i < 8) && (!(rsc->msr & (0x1 << i))); ) + i++; + rsc->conj += (AUDIO_SLOT_BLOCK_NUM >> i); + return rsc->conj; +} + +static int rsc_master(struct rsc *rsc) +{ + return rsc->conj = rsc->idx; +} + +static struct rsc_ops rsc_generic_ops = { + .index = rsc_index, + .output_slot = audio_ring_slot, + .master = rsc_master, + .next_conj = rsc_next_conj, +}; + +int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw) +{ + int err = 0; + + rsc->idx = idx; + rsc->conj = idx; + rsc->type = type; + rsc->msr = msr; + rsc->hw = hw; + rsc->ops = &rsc_generic_ops; + if (NULL == hw) { + rsc->ctrl_blk = NULL; + return 0; + } + + switch (type) { + case SRC: + err = ((struct hw *)hw)->src_rsc_get_ctrl_blk(&rsc->ctrl_blk); + break; + case AMIXER: + err = ((struct hw *)hw)-> + amixer_rsc_get_ctrl_blk(&rsc->ctrl_blk); + break; + case SRCIMP: + case SUM: + case DAIO: + break; + default: + printk(KERN_ERR + "ctxfi: Invalid resource type value %d!\n", type); + return -EINVAL; + } + + if (err) { + printk(KERN_ERR + "ctxfi: Failed to get resource control block!\n"); + return err; + } + + return 0; +} + +int rsc_uninit(struct rsc *rsc) +{ + if ((NULL != rsc->hw) && (NULL != rsc->ctrl_blk)) { + switch (rsc->type) { + case SRC: + ((struct hw *)rsc->hw)-> + src_rsc_put_ctrl_blk(rsc->ctrl_blk); + break; + case AMIXER: + ((struct hw *)rsc->hw)-> + amixer_rsc_put_ctrl_blk(rsc->ctrl_blk); + break; + case SUM: + case DAIO: + break; + default: + printk(KERN_ERR "ctxfi: " + "Invalid resource type value %d!\n", rsc->type); + break; + } + + rsc->hw = rsc->ctrl_blk = NULL; + } + + rsc->idx = rsc->conj = 0; + rsc->type = NUM_RSCTYP; + rsc->msr = 0; + + return 0; +} + +int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type, + unsigned int amount, void *hw_obj) +{ + int err = 0; + struct hw *hw = hw_obj; + + mgr->type = NUM_RSCTYP; + + mgr->rscs = kzalloc(((amount + 8 - 1) / 8), GFP_KERNEL); + if (NULL == mgr->rscs) + return -ENOMEM; + + switch (type) { + case SRC: + err = hw->src_mgr_get_ctrl_blk(&mgr->ctrl_blk); + break; + case SRCIMP: + err = hw->srcimp_mgr_get_ctrl_blk(&mgr->ctrl_blk); + break; + case AMIXER: + err = hw->amixer_mgr_get_ctrl_blk(&mgr->ctrl_blk); + break; + case DAIO: + err = hw->daio_mgr_get_ctrl_blk(hw, &mgr->ctrl_blk); + break; + case SUM: + break; + default: + printk(KERN_ERR + "ctxfi: Invalid resource type value %d!\n", type); + err = -EINVAL; + goto error; + } + + if (err) { + printk(KERN_ERR + "ctxfi: Failed to get manager control block!\n"); + goto error; + } + + mgr->type = type; + mgr->avail = mgr->amount = amount; + mgr->hw = hw; + + return 0; + +error: + kfree(mgr->rscs); + return err; +} + +int rsc_mgr_uninit(struct rsc_mgr *mgr) +{ + if (NULL != mgr->rscs) { + kfree(mgr->rscs); + mgr->rscs = NULL; + } + + if ((NULL != mgr->hw) && (NULL != mgr->ctrl_blk)) { + switch (mgr->type) { + case SRC: + ((struct hw *)mgr->hw)-> + src_mgr_put_ctrl_blk(mgr->ctrl_blk); + break; + case SRCIMP: + ((struct hw *)mgr->hw)-> + srcimp_mgr_put_ctrl_blk(mgr->ctrl_blk); + break; + case AMIXER: + ((struct hw *)mgr->hw)-> + amixer_mgr_put_ctrl_blk(mgr->ctrl_blk); + break; + case DAIO: + ((struct hw *)mgr->hw)-> + daio_mgr_put_ctrl_blk(mgr->ctrl_blk); + break; + case SUM: + break; + default: + printk(KERN_ERR "ctxfi: " + "Invalid resource type value %d!\n", mgr->type); + break; + } + + mgr->hw = mgr->ctrl_blk = NULL; + } + + mgr->type = NUM_RSCTYP; + mgr->avail = mgr->amount = 0; + + return 0; +} diff --git a/sound/pci/ctxfi/ctresource.h b/sound/pci/ctxfi/ctresource.h new file mode 100644 index 0000000..0838c2e --- /dev/null +++ b/sound/pci/ctxfi/ctresource.h @@ -0,0 +1,72 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctresource.h + * + * @Brief + * This file contains the definition of generic hardware resources for + * resource management. + * + * @Author Liu Chun + * @Date May 13 2008 + * + */ + +#ifndef CTRESOURCE_H +#define CTRESOURCE_H + +#include + +enum RSCTYP { + SRC, + SRCIMP, + AMIXER, + SUM, + DAIO, + NUM_RSCTYP /* This must be the last one and less than 16 */ +}; + +struct rsc_ops; + +struct rsc { + u32 idx:12; /* The index of a resource */ + u32 type:4; /* The type (RSCTYP) of a resource */ + u32 conj:12; /* Current conjugate index */ + u32 msr:4; /* The Master Sample Rate a resource working on */ + void *ctrl_blk; /* Chip specific control info block for a resource */ + void *hw; /* Chip specific object for hardware access means */ + struct rsc_ops *ops; /* Generic resource operations */ +}; + +struct rsc_ops { + int (*master)(struct rsc *rsc); /* Move to master resource */ + int (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */ + int (*index)(const struct rsc *rsc); /* Return the index of resource */ + /* Return the output slot number */ + int (*output_slot)(const struct rsc *rsc); +}; + +int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw); +int rsc_uninit(struct rsc *rsc); + +struct rsc_mgr { + enum RSCTYP type; /* The type (RSCTYP) of resource to manage */ + unsigned int amount; /* The total amount of a kind of resource */ + unsigned int avail; /* The amount of currently available resources */ + unsigned char *rscs; /* The bit-map for resource allocation */ + void *ctrl_blk; /* Chip specific control info block */ + void *hw; /* Chip specific object for hardware access */ +}; + +/* Resource management is based on bit-map mechanism */ +int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type, + unsigned int amount, void *hw); +int rsc_mgr_uninit(struct rsc_mgr *mgr); +int mgr_get_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int *ridx); +int mgr_put_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int idx); + +#endif /* CTRESOURCE_H */ diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c new file mode 100644 index 0000000..e1c145d --- /dev/null +++ b/sound/pci/ctxfi/ctsrc.c @@ -0,0 +1,886 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctsrc.c + * + * @Brief + * This file contains the implementation of the Sample Rate Convertor + * resource management object. + * + * @Author Liu Chun + * @Date May 13 2008 + * + */ + +#include "ctsrc.h" +#include "cthardware.h" +#include + +#define SRC_RESOURCE_NUM 64 +#define SRCIMP_RESOURCE_NUM 256 + +static unsigned int conj_mask; + +static int src_default_config_memrd(struct src *src); +static int src_default_config_memwr(struct src *src); +static int src_default_config_arcrw(struct src *src); + +static int (*src_default_config[3])(struct src *) = { + [MEMRD] = src_default_config_memrd, + [MEMWR] = src_default_config_memwr, + [ARCRW] = src_default_config_arcrw +}; + +static int src_set_state(struct src *src, unsigned int state) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_state(src->rsc.ctrl_blk, state); + + return 0; +} + +static int src_set_bm(struct src *src, unsigned int bm) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_bm(src->rsc.ctrl_blk, bm); + + return 0; +} + +static int src_set_sf(struct src *src, unsigned int sf) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_sf(src->rsc.ctrl_blk, sf); + + return 0; +} + +static int src_set_pm(struct src *src, unsigned int pm) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_pm(src->rsc.ctrl_blk, pm); + + return 0; +} + +static int src_set_rom(struct src *src, unsigned int rom) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_rom(src->rsc.ctrl_blk, rom); + + return 0; +} + +static int src_set_vo(struct src *src, unsigned int vo) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_vo(src->rsc.ctrl_blk, vo); + + return 0; +} + +static int src_set_st(struct src *src, unsigned int st) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_st(src->rsc.ctrl_blk, st); + + return 0; +} + +static int src_set_bp(struct src *src, unsigned int bp) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_bp(src->rsc.ctrl_blk, bp); + + return 0; +} + +static int src_set_cisz(struct src *src, unsigned int cisz) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_cisz(src->rsc.ctrl_blk, cisz); + + return 0; +} + +static int src_set_ca(struct src *src, unsigned int ca) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_ca(src->rsc.ctrl_blk, ca); + + return 0; +} + +static int src_set_sa(struct src *src, unsigned int sa) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_sa(src->rsc.ctrl_blk, sa); + + return 0; +} + +static int src_set_la(struct src *src, unsigned int la) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_la(src->rsc.ctrl_blk, la); + + return 0; +} + +static int src_set_pitch(struct src *src, unsigned int pitch) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_pitch(src->rsc.ctrl_blk, pitch); + + return 0; +} + +static int src_set_clear_zbufs(struct src *src) +{ + struct hw *hw; + + hw = src->rsc.hw; + hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1); + + return 0; +} + +static int src_commit_write(struct src *src) +{ + struct hw *hw; + int i; + unsigned int dirty = 0; + + hw = src->rsc.hw; + src->rsc.ops->master(&src->rsc); + if (src->rsc.msr > 1) { + /* Save dirty flags for conjugate resource programming */ + dirty = hw->src_get_dirty(src->rsc.ctrl_blk) & conj_mask; + } + hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc), + src->rsc.ctrl_blk); + + /* Program conjugate parameter mixer resources */ + if (MEMWR == src->mode) + return 0; + + for (i = 1; i < src->rsc.msr; i++) { + src->rsc.ops->next_conj(&src->rsc); + hw->src_set_dirty(src->rsc.ctrl_blk, dirty); + hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc), + src->rsc.ctrl_blk); + } + src->rsc.ops->master(&src->rsc); + + return 0; +} + +static int src_get_ca(struct src *src) +{ + struct hw *hw; + + hw = src->rsc.hw; + return hw->src_get_ca(hw, src->rsc.ops->index(&src->rsc), + src->rsc.ctrl_blk); +} + +static int src_init(struct src *src) +{ + src_default_config[src->mode](src); + + return 0; +} + +static struct src *src_next_interleave(struct src *src) +{ + return src->intlv; +} + +static int src_default_config_memrd(struct src *src) +{ + struct hw *hw = src->rsc.hw; + unsigned int rsr, msr; + + hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF); + hw->src_set_bm(src->rsc.ctrl_blk, 1); + for (rsr = 0, msr = src->rsc.msr; msr > 1; msr >>= 1) + rsr++; + + hw->src_set_rsr(src->rsc.ctrl_blk, rsr); + hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_S16); + hw->src_set_wr(src->rsc.ctrl_blk, 0); + hw->src_set_pm(src->rsc.ctrl_blk, 0); + hw->src_set_rom(src->rsc.ctrl_blk, 0); + hw->src_set_vo(src->rsc.ctrl_blk, 0); + hw->src_set_st(src->rsc.ctrl_blk, 0); + hw->src_set_ilsz(src->rsc.ctrl_blk, src->multi - 1); + hw->src_set_cisz(src->rsc.ctrl_blk, 0x80); + hw->src_set_sa(src->rsc.ctrl_blk, 0x0); + hw->src_set_la(src->rsc.ctrl_blk, 0x1000); + hw->src_set_ca(src->rsc.ctrl_blk, 0x80); + hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000); + hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1); + + src->rsc.ops->master(&src->rsc); + hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc), + src->rsc.ctrl_blk); + + for (msr = 1; msr < src->rsc.msr; msr++) { + src->rsc.ops->next_conj(&src->rsc); + hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000); + hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc), + src->rsc.ctrl_blk); + } + src->rsc.ops->master(&src->rsc); + + return 0; +} + +static int src_default_config_memwr(struct src *src) +{ + struct hw *hw = src->rsc.hw; + + hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF); + hw->src_set_bm(src->rsc.ctrl_blk, 1); + hw->src_set_rsr(src->rsc.ctrl_blk, 0); + hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_S16); + hw->src_set_wr(src->rsc.ctrl_blk, 1); + hw->src_set_pm(src->rsc.ctrl_blk, 0); + hw->src_set_rom(src->rsc.ctrl_blk, 0); + hw->src_set_vo(src->rsc.ctrl_blk, 0); + hw->src_set_st(src->rsc.ctrl_blk, 0); + hw->src_set_ilsz(src->rsc.ctrl_blk, 0); + hw->src_set_cisz(src->rsc.ctrl_blk, 0x80); + hw->src_set_sa(src->rsc.ctrl_blk, 0x0); + hw->src_set_la(src->rsc.ctrl_blk, 0x1000); + hw->src_set_ca(src->rsc.ctrl_blk, 0x80); + hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000); + hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1); + + src->rsc.ops->master(&src->rsc); + hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc), + src->rsc.ctrl_blk); + + return 0; +} + +static int src_default_config_arcrw(struct src *src) +{ + struct hw *hw = src->rsc.hw; + unsigned int rsr, msr; + unsigned int dirty; + + hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF); + hw->src_set_bm(src->rsc.ctrl_blk, 0); + for (rsr = 0, msr = src->rsc.msr; msr > 1; msr >>= 1) + rsr++; + + hw->src_set_rsr(src->rsc.ctrl_blk, rsr); + hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_F32); + hw->src_set_wr(src->rsc.ctrl_blk, 0); + hw->src_set_pm(src->rsc.ctrl_blk, 0); + hw->src_set_rom(src->rsc.ctrl_blk, 0); + hw->src_set_vo(src->rsc.ctrl_blk, 0); + hw->src_set_st(src->rsc.ctrl_blk, 0); + hw->src_set_ilsz(src->rsc.ctrl_blk, 0); + hw->src_set_cisz(src->rsc.ctrl_blk, 0x80); + hw->src_set_sa(src->rsc.ctrl_blk, 0x0); + /*hw->src_set_sa(src->rsc.ctrl_blk, 0x100);*/ + hw->src_set_la(src->rsc.ctrl_blk, 0x1000); + /*hw->src_set_la(src->rsc.ctrl_blk, 0x03ffffe0);*/ + hw->src_set_ca(src->rsc.ctrl_blk, 0x80); + hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000); + hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1); + + dirty = hw->src_get_dirty(src->rsc.ctrl_blk); + src->rsc.ops->master(&src->rsc); + for (msr = 0; msr < src->rsc.msr; msr++) { + hw->src_set_dirty(src->rsc.ctrl_blk, dirty); + hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc), + src->rsc.ctrl_blk); + src->rsc.ops->next_conj(&src->rsc); + } + src->rsc.ops->master(&src->rsc); + + return 0; +} + +static struct src_rsc_ops src_rsc_ops = { + .set_state = src_set_state, + .set_bm = src_set_bm, + .set_sf = src_set_sf, + .set_pm = src_set_pm, + .set_rom = src_set_rom, + .set_vo = src_set_vo, + .set_st = src_set_st, + .set_bp = src_set_bp, + .set_cisz = src_set_cisz, + .set_ca = src_set_ca, + .set_sa = src_set_sa, + .set_la = src_set_la, + .set_pitch = src_set_pitch, + .set_clr_zbufs = src_set_clear_zbufs, + .commit_write = src_commit_write, + .get_ca = src_get_ca, + .init = src_init, + .next_interleave = src_next_interleave, +}; + +static int +src_rsc_init(struct src *src, u32 idx, + const struct src_desc *desc, struct src_mgr *mgr) +{ + int err; + int i, n; + struct src *p; + + n = (MEMRD == desc->mode) ? desc->multi : 1; + for (i = 0, p = src; i < n; i++, p++) { + err = rsc_init(&p->rsc, idx + i, SRC, desc->msr, mgr->mgr.hw); + if (err) + goto error1; + + /* Initialize src specific rsc operations */ + p->ops = &src_rsc_ops; + p->multi = (0 == i) ? desc->multi : 1; + p->mode = desc->mode; + src_default_config[desc->mode](p); + mgr->src_enable(mgr, p); + p->intlv = p + 1; + } + (--p)->intlv = NULL; /* Set @intlv of the last SRC to NULL */ + + mgr->commit_write(mgr); + + return 0; + +error1: + for (i--, p--; i >= 0; i--, p--) { + mgr->src_disable(mgr, p); + rsc_uninit(&p->rsc); + } + mgr->commit_write(mgr); + return err; +} + +static int src_rsc_uninit(struct src *src, struct src_mgr *mgr) +{ + int i, n; + struct src *p; + + n = (MEMRD == src->mode) ? src->multi : 1; + for (i = 0, p = src; i < n; i++, p++) { + mgr->src_disable(mgr, p); + rsc_uninit(&p->rsc); + p->multi = 0; + p->ops = NULL; + p->mode = NUM_SRCMODES; + p->intlv = NULL; + } + mgr->commit_write(mgr); + + return 0; +} + +static int +get_src_rsc(struct src_mgr *mgr, const struct src_desc *desc, struct src **rsrc) +{ + unsigned int idx = SRC_RESOURCE_NUM; + int err; + struct src *src; + unsigned long flags; + + *rsrc = NULL; + + /* Check whether there are sufficient src resources to meet request. */ + spin_lock_irqsave(&mgr->mgr_lock, flags); + if (MEMRD == desc->mode) + err = mgr_get_resource(&mgr->mgr, desc->multi, &idx); + else + err = mgr_get_resource(&mgr->mgr, 1, &idx); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + if (err) { + printk(KERN_ERR "ctxfi: Can't meet SRC resource request!\n"); + return err; + } + + /* Allocate mem for master src resource */ + if (MEMRD == desc->mode) + src = kzalloc(sizeof(*src)*desc->multi, GFP_KERNEL); + else + src = kzalloc(sizeof(*src), GFP_KERNEL); + + if (NULL == src) { + err = -ENOMEM; + goto error1; + } + + err = src_rsc_init(src, idx, desc, mgr); + if (err) + goto error2; + + *rsrc = src; + + return 0; + +error2: + kfree(src); +error1: + spin_lock_irqsave(&mgr->mgr_lock, flags); + if (MEMRD == desc->mode) + mgr_put_resource(&mgr->mgr, desc->multi, idx); + else + mgr_put_resource(&mgr->mgr, 1, idx); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + return err; +} + +static int put_src_rsc(struct src_mgr *mgr, struct src *src) +{ + unsigned long flags; + + spin_lock_irqsave(&mgr->mgr_lock, flags); + src->rsc.ops->master(&src->rsc); + if (MEMRD == src->mode) + mgr_put_resource(&mgr->mgr, src->multi, + src->rsc.ops->index(&src->rsc)); + else + mgr_put_resource(&mgr->mgr, 1, src->rsc.ops->index(&src->rsc)); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + src_rsc_uninit(src, mgr); + kfree(src); + + return 0; +} + +static int src_enable_s(struct src_mgr *mgr, struct src *src) +{ + struct hw *hw = mgr->mgr.hw; + int i; + + src->rsc.ops->master(&src->rsc); + for (i = 0; i < src->rsc.msr; i++) { + hw->src_mgr_enbs_src(mgr->mgr.ctrl_blk, + src->rsc.ops->index(&src->rsc)); + src->rsc.ops->next_conj(&src->rsc); + } + src->rsc.ops->master(&src->rsc); + + return 0; +} + +static int src_enable(struct src_mgr *mgr, struct src *src) +{ + struct hw *hw = mgr->mgr.hw; + int i; + + src->rsc.ops->master(&src->rsc); + for (i = 0; i < src->rsc.msr; i++) { + hw->src_mgr_enb_src(mgr->mgr.ctrl_blk, + src->rsc.ops->index(&src->rsc)); + src->rsc.ops->next_conj(&src->rsc); + } + src->rsc.ops->master(&src->rsc); + + return 0; +} + +static int src_disable(struct src_mgr *mgr, struct src *src) +{ + struct hw *hw = mgr->mgr.hw; + int i; + + src->rsc.ops->master(&src->rsc); + for (i = 0; i < src->rsc.msr; i++) { + hw->src_mgr_dsb_src(mgr->mgr.ctrl_blk, + src->rsc.ops->index(&src->rsc)); + src->rsc.ops->next_conj(&src->rsc); + } + src->rsc.ops->master(&src->rsc); + + return 0; +} + +static int src_mgr_commit_write(struct src_mgr *mgr) +{ + struct hw *hw = mgr->mgr.hw; + + hw->src_mgr_commit_write(hw, mgr->mgr.ctrl_blk); + + return 0; +} + +int src_mgr_create(void *hw, struct src_mgr **rsrc_mgr) +{ + int err, i; + struct src_mgr *src_mgr; + + *rsrc_mgr = NULL; + src_mgr = kzalloc(sizeof(*src_mgr), GFP_KERNEL); + if (NULL == src_mgr) + return -ENOMEM; + + err = rsc_mgr_init(&src_mgr->mgr, SRC, SRC_RESOURCE_NUM, hw); + if (err) + goto error1; + + spin_lock_init(&src_mgr->mgr_lock); + conj_mask = ((struct hw *)hw)->src_dirty_conj_mask(); + + src_mgr->get_src = get_src_rsc; + src_mgr->put_src = put_src_rsc; + src_mgr->src_enable_s = src_enable_s; + src_mgr->src_enable = src_enable; + src_mgr->src_disable = src_disable; + src_mgr->commit_write = src_mgr_commit_write; + + /* Disable all SRC resources. */ + for (i = 0; i < 256; i++) + ((struct hw *)hw)->src_mgr_dsb_src(src_mgr->mgr.ctrl_blk, i); + + ((struct hw *)hw)->src_mgr_commit_write(hw, src_mgr->mgr.ctrl_blk); + + *rsrc_mgr = src_mgr; + + return 0; + +error1: + kfree(src_mgr); + return err; +} + +int src_mgr_destroy(struct src_mgr *src_mgr) +{ + rsc_mgr_uninit(&src_mgr->mgr); + kfree(src_mgr); + + return 0; +} + +/* SRCIMP resource manager operations */ + +static int srcimp_master(struct rsc *rsc) +{ + rsc->conj = 0; + return rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0]; +} + +static int srcimp_next_conj(struct rsc *rsc) +{ + rsc->conj++; + return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj]; +} + +static int srcimp_index(const struct rsc *rsc) +{ + return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj]; +} + +static struct rsc_ops srcimp_basic_rsc_ops = { + .master = srcimp_master, + .next_conj = srcimp_next_conj, + .index = srcimp_index, + .output_slot = NULL, +}; + +static int srcimp_map(struct srcimp *srcimp, struct src *src, struct rsc *input) +{ + struct imapper *entry; + int i; + + srcimp->rsc.ops->master(&srcimp->rsc); + src->rsc.ops->master(&src->rsc); + input->ops->master(input); + + /* Program master and conjugate resources */ + for (i = 0; i < srcimp->rsc.msr; i++) { + entry = &srcimp->imappers[i]; + entry->slot = input->ops->output_slot(input); + entry->user = src->rsc.ops->index(&src->rsc); + entry->addr = srcimp->rsc.ops->index(&srcimp->rsc); + srcimp->mgr->imap_add(srcimp->mgr, entry); + srcimp->mapped |= (0x1 << i); + + srcimp->rsc.ops->next_conj(&srcimp->rsc); + input->ops->next_conj(input); + } + + srcimp->rsc.ops->master(&srcimp->rsc); + input->ops->master(input); + + return 0; +} + +static int srcimp_unmap(struct srcimp *srcimp) +{ + int i; + + /* Program master and conjugate resources */ + for (i = 0; i < srcimp->rsc.msr; i++) { + if (srcimp->mapped & (0x1 << i)) { + srcimp->mgr->imap_delete(srcimp->mgr, + &srcimp->imappers[i]); + srcimp->mapped &= ~(0x1 << i); + } + } + + return 0; +} + +static struct srcimp_rsc_ops srcimp_ops = { + .map = srcimp_map, + .unmap = srcimp_unmap +}; + +static int srcimp_rsc_init(struct srcimp *srcimp, + const struct srcimp_desc *desc, + struct srcimp_mgr *mgr) +{ + int err; + + err = rsc_init(&srcimp->rsc, srcimp->idx[0], + SRCIMP, desc->msr, mgr->mgr.hw); + if (err) + return err; + + /* Reserve memory for imapper nodes */ + srcimp->imappers = kzalloc(sizeof(struct imapper)*desc->msr, + GFP_KERNEL); + if (NULL == srcimp->imappers) { + err = -ENOMEM; + goto error1; + } + + /* Set srcimp specific operations */ + srcimp->rsc.ops = &srcimp_basic_rsc_ops; + srcimp->ops = &srcimp_ops; + srcimp->mgr = mgr; + + srcimp->rsc.ops->master(&srcimp->rsc); + + return 0; + +error1: + rsc_uninit(&srcimp->rsc); + return err; +} + +static int srcimp_rsc_uninit(struct srcimp *srcimp) +{ + if (NULL != srcimp->imappers) { + kfree(srcimp->imappers); + srcimp->imappers = NULL; + } + srcimp->ops = NULL; + srcimp->mgr = NULL; + rsc_uninit(&srcimp->rsc); + + return 0; +} + +static int get_srcimp_rsc(struct srcimp_mgr *mgr, + const struct srcimp_desc *desc, + struct srcimp **rsrcimp) +{ + int err, i; + unsigned int idx; + struct srcimp *srcimp; + unsigned long flags; + + *rsrcimp = NULL; + + /* Allocate mem for SRCIMP resource */ + srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL); + if (NULL == srcimp) { + err = -ENOMEM; + return err; + } + + /* Check whether there are sufficient SRCIMP resources. */ + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i = 0; i < desc->msr; i++) { + err = mgr_get_resource(&mgr->mgr, 1, &idx); + if (err) + break; + + srcimp->idx[i] = idx; + } + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + if (err) { + printk(KERN_ERR "ctxfi: Can't meet SRCIMP resource request!\n"); + goto error1; + } + + err = srcimp_rsc_init(srcimp, desc, mgr); + if (err) + goto error1; + + *rsrcimp = srcimp; + + return 0; + +error1: + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i--; i >= 0; i--) + mgr_put_resource(&mgr->mgr, 1, srcimp->idx[i]); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + kfree(srcimp); + return err; +} + +static int put_srcimp_rsc(struct srcimp_mgr *mgr, struct srcimp *srcimp) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&mgr->mgr_lock, flags); + for (i = 0; i < srcimp->rsc.msr; i++) + mgr_put_resource(&mgr->mgr, 1, srcimp->idx[i]); + + spin_unlock_irqrestore(&mgr->mgr_lock, flags); + srcimp_rsc_uninit(srcimp); + kfree(srcimp); + + return 0; +} + +static int srcimp_map_op(void *data, struct imapper *entry) +{ + struct rsc_mgr *mgr = &((struct srcimp_mgr *)data)->mgr; + struct hw *hw = mgr->hw; + + hw->srcimp_mgr_set_imaparc(mgr->ctrl_blk, entry->slot); + hw->srcimp_mgr_set_imapuser(mgr->ctrl_blk, entry->user); + hw->srcimp_mgr_set_imapnxt(mgr->ctrl_blk, entry->next); + hw->srcimp_mgr_set_imapaddr(mgr->ctrl_blk, entry->addr); + hw->srcimp_mgr_commit_write(mgr->hw, mgr->ctrl_blk); + + return 0; +} + +static int srcimp_imap_add(struct srcimp_mgr *mgr, struct imapper *entry) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&mgr->imap_lock, flags); + if ((0 == entry->addr) && (mgr->init_imap_added)) { + input_mapper_delete(&mgr->imappers, + mgr->init_imap, srcimp_map_op, mgr); + mgr->init_imap_added = 0; + } + err = input_mapper_add(&mgr->imappers, entry, srcimp_map_op, mgr); + spin_unlock_irqrestore(&mgr->imap_lock, flags); + + return err; +} + +static int srcimp_imap_delete(struct srcimp_mgr *mgr, struct imapper *entry) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&mgr->imap_lock, flags); + err = input_mapper_delete(&mgr->imappers, entry, srcimp_map_op, mgr); + if (list_empty(&mgr->imappers)) { + input_mapper_add(&mgr->imappers, mgr->init_imap, + srcimp_map_op, mgr); + mgr->init_imap_added = 1; + } + spin_unlock_irqrestore(&mgr->imap_lock, flags); + + return err; +} + +int srcimp_mgr_create(void *hw, struct srcimp_mgr **rsrcimp_mgr) +{ + int err; + struct srcimp_mgr *srcimp_mgr; + struct imapper *entry; + + *rsrcimp_mgr = NULL; + srcimp_mgr = kzalloc(sizeof(*srcimp_mgr), GFP_KERNEL); + if (NULL == srcimp_mgr) + return -ENOMEM; + + err = rsc_mgr_init(&srcimp_mgr->mgr, SRCIMP, SRCIMP_RESOURCE_NUM, hw); + if (err) + goto error1; + + spin_lock_init(&srcimp_mgr->mgr_lock); + spin_lock_init(&srcimp_mgr->imap_lock); + INIT_LIST_HEAD(&srcimp_mgr->imappers); + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (NULL == entry) { + err = -ENOMEM; + goto error2; + } + entry->slot = entry->addr = entry->next = entry->user = 0; + list_add(&entry->list, &srcimp_mgr->imappers); + srcimp_mgr->init_imap = entry; + srcimp_mgr->init_imap_added = 1; + + srcimp_mgr->get_srcimp = get_srcimp_rsc; + srcimp_mgr->put_srcimp = put_srcimp_rsc; + srcimp_mgr->imap_add = srcimp_imap_add; + srcimp_mgr->imap_delete = srcimp_imap_delete; + + *rsrcimp_mgr = srcimp_mgr; + + return 0; + +error2: + rsc_mgr_uninit(&srcimp_mgr->mgr); +error1: + kfree(srcimp_mgr); + return err; +} + +int srcimp_mgr_destroy(struct srcimp_mgr *srcimp_mgr) +{ + unsigned long flags; + + /* free src input mapper list */ + spin_lock_irqsave(&srcimp_mgr->imap_lock, flags); + free_input_mapper_list(&srcimp_mgr->imappers); + spin_unlock_irqrestore(&srcimp_mgr->imap_lock, flags); + + rsc_mgr_uninit(&srcimp_mgr->mgr); + kfree(srcimp_mgr); + + return 0; +} diff --git a/sound/pci/ctxfi/ctsrc.h b/sound/pci/ctxfi/ctsrc.h new file mode 100644 index 0000000..259366a --- /dev/null +++ b/sound/pci/ctxfi/ctsrc.h @@ -0,0 +1,149 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctsrc.h + * + * @Brief + * This file contains the definition of the Sample Rate Convertor + * resource management object. + * + * @Author Liu Chun + * @Date May 13 2008 + * + */ + +#ifndef CTSRC_H +#define CTSRC_H + +#include "ctresource.h" +#include "ctimap.h" +#include +#include + +#define SRC_STATE_OFF 0x0 +#define SRC_STATE_INIT 0x4 +#define SRC_STATE_RUN 0x5 + +#define SRC_SF_U8 0x0 +#define SRC_SF_S16 0x1 +#define SRC_SF_S24 0x2 +#define SRC_SF_S32 0x3 +#define SRC_SF_F32 0x4 + +/* Define the descriptor of a src resource */ +enum SRCMODE { + MEMRD, /* Read data from host memory */ + MEMWR, /* Write data to host memory */ + ARCRW, /* Read from and write to audio ring channel */ + NUM_SRCMODES +}; + +struct src_rsc_ops; + +struct src { + struct rsc rsc; /* Basic resource info */ + struct src *intlv; /* Pointer to next interleaved SRC in a series */ + struct src_rsc_ops *ops; /* SRC specific operations */ + /* Number of contiguous srcs for interleaved usage */ + unsigned char multi; + unsigned char mode; /* Working mode of this SRC resource */ +}; + +struct src_rsc_ops { + int (*set_state)(struct src *src, unsigned int state); + int (*set_bm)(struct src *src, unsigned int bm); + int (*set_sf)(struct src *src, unsigned int sf); + int (*set_pm)(struct src *src, unsigned int pm); + int (*set_rom)(struct src *src, unsigned int rom); + int (*set_vo)(struct src *src, unsigned int vo); + int (*set_st)(struct src *src, unsigned int st); + int (*set_bp)(struct src *src, unsigned int bp); + int (*set_cisz)(struct src *src, unsigned int cisz); + int (*set_ca)(struct src *src, unsigned int ca); + int (*set_sa)(struct src *src, unsigned int sa); + int (*set_la)(struct src *src, unsigned int la); + int (*set_pitch)(struct src *src, unsigned int pitch); + int (*set_clr_zbufs)(struct src *src); + int (*commit_write)(struct src *src); + int (*get_ca)(struct src *src); + int (*init)(struct src *src); + struct src* (*next_interleave)(struct src *src); +}; + +/* Define src resource request description info */ +struct src_desc { + /* Number of contiguous master srcs for interleaved usage */ + unsigned char multi; + unsigned char msr; + unsigned char mode; /* Working mode of the requested srcs */ +}; + +/* Define src manager object */ +struct src_mgr { + struct rsc_mgr mgr; /* Basic resource manager info */ + spinlock_t mgr_lock; + + /* request src resource */ + int (*get_src)(struct src_mgr *mgr, + const struct src_desc *desc, struct src **rsrc); + /* return src resource */ + int (*put_src)(struct src_mgr *mgr, struct src *src); + int (*src_enable_s)(struct src_mgr *mgr, struct src *src); + int (*src_enable)(struct src_mgr *mgr, struct src *src); + int (*src_disable)(struct src_mgr *mgr, struct src *src); + int (*commit_write)(struct src_mgr *mgr); +}; + +/* Define the descriptor of a SRC Input Mapper resource */ +struct srcimp_mgr; +struct srcimp_rsc_ops; + +struct srcimp { + struct rsc rsc; + unsigned char idx[8]; + struct imapper *imappers; + unsigned int mapped; /* A bit-map indicating which conj rsc is mapped */ + struct srcimp_mgr *mgr; + struct srcimp_rsc_ops *ops; +}; + +struct srcimp_rsc_ops { + int (*map)(struct srcimp *srcimp, struct src *user, struct rsc *input); + int (*unmap)(struct srcimp *srcimp); +}; + +/* Define SRCIMP resource request description info */ +struct srcimp_desc { + unsigned int msr; +}; + +struct srcimp_mgr { + struct rsc_mgr mgr; /* Basic resource manager info */ + spinlock_t mgr_lock; + spinlock_t imap_lock; + struct list_head imappers; + struct imapper *init_imap; + unsigned int init_imap_added; + + /* request srcimp resource */ + int (*get_srcimp)(struct srcimp_mgr *mgr, + const struct srcimp_desc *desc, + struct srcimp **rsrcimp); + /* return srcimp resource */ + int (*put_srcimp)(struct srcimp_mgr *mgr, struct srcimp *srcimp); + int (*imap_add)(struct srcimp_mgr *mgr, struct imapper *entry); + int (*imap_delete)(struct srcimp_mgr *mgr, struct imapper *entry); +}; + +/* Constructor and destructor of SRC resource manager */ +int src_mgr_create(void *hw, struct src_mgr **rsrc_mgr); +int src_mgr_destroy(struct src_mgr *src_mgr); +/* Constructor and destructor of SRCIMP resource manager */ +int srcimp_mgr_create(void *hw, struct srcimp_mgr **rsrc_mgr); +int srcimp_mgr_destroy(struct srcimp_mgr *srcimp_mgr); + +#endif /* CTSRC_H */ diff --git a/sound/pci/ctxfi/cttimer.c b/sound/pci/ctxfi/cttimer.c new file mode 100644 index 0000000..779c6c3 --- /dev/null +++ b/sound/pci/ctxfi/cttimer.c @@ -0,0 +1,441 @@ +/* + * PCM timer handling on ctxfi + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + */ + +#include +#include +#include +#include +#include +#include "ctatc.h" +#include "cthardware.h" +#include "cttimer.h" + +static int use_system_timer; +MODULE_PARM_DESC(use_system_timer, "Foce to use system-timer"); +module_param(use_system_timer, bool, S_IRUGO); + +struct ct_timer_ops { + void (*init)(struct ct_timer_instance *); + void (*prepare)(struct ct_timer_instance *); + void (*start)(struct ct_timer_instance *); + void (*stop)(struct ct_timer_instance *); + void (*free_instance)(struct ct_timer_instance *); + void (*interrupt)(struct ct_timer *); + void (*free_global)(struct ct_timer *); +}; + +/* timer instance -- assigned to each PCM stream */ +struct ct_timer_instance { + spinlock_t lock; + struct ct_timer *timer_base; + struct ct_atc_pcm *apcm; + struct snd_pcm_substream *substream; + struct timer_list timer; + struct list_head instance_list; + struct list_head running_list; + unsigned int position; + unsigned int frag_count; + unsigned int running:1; + unsigned int need_update:1; +}; + +/* timer instance manager */ +struct ct_timer { + spinlock_t lock; /* global timer lock (for xfitimer) */ + spinlock_t list_lock; /* lock for instance list */ + struct ct_atc *atc; + struct ct_timer_ops *ops; + struct list_head instance_head; + struct list_head running_head; + unsigned int wc; /* current wallclock */ + unsigned int irq_handling:1; /* in IRQ handling */ + unsigned int reprogram:1; /* need to reprogram the internval */ + unsigned int running:1; /* global timer running */ +}; + + +/* + * system-timer-based updates + */ + +static void ct_systimer_callback(unsigned long data) +{ + struct ct_timer_instance *ti = (struct ct_timer_instance *)data; + struct snd_pcm_substream *substream = ti->substream; + struct snd_pcm_runtime *runtime = substream->runtime; + struct ct_atc_pcm *apcm = ti->apcm; + unsigned int period_size = runtime->period_size; + unsigned int buffer_size = runtime->buffer_size; + unsigned long flags; + unsigned int position, dist, interval; + + position = substream->ops->pointer(substream); + dist = (position + buffer_size - ti->position) % buffer_size; + if (dist >= period_size || + position / period_size != ti->position / period_size) { + apcm->interrupt(apcm); + ti->position = position; + } + /* Add extra HZ*5/1000 to avoid overrun issue when recording + * at 8kHz in 8-bit format or at 88kHz in 24-bit format. */ + interval = ((period_size - (position % period_size)) + * HZ + (runtime->rate - 1)) / runtime->rate + HZ * 5 / 1000; + spin_lock_irqsave(&ti->lock, flags); + if (ti->running) + mod_timer(&ti->timer, jiffies + interval); + spin_unlock_irqrestore(&ti->lock, flags); +} + +static void ct_systimer_init(struct ct_timer_instance *ti) +{ + setup_timer(&ti->timer, ct_systimer_callback, + (unsigned long)ti); +} + +static void ct_systimer_start(struct ct_timer_instance *ti) +{ + struct snd_pcm_runtime *runtime = ti->substream->runtime; + unsigned long flags; + + spin_lock_irqsave(&ti->lock, flags); + ti->running = 1; + mod_timer(&ti->timer, + jiffies + (runtime->period_size * HZ + + (runtime->rate - 1)) / runtime->rate); + spin_unlock_irqrestore(&ti->lock, flags); +} + +static void ct_systimer_stop(struct ct_timer_instance *ti) +{ + unsigned long flags; + + spin_lock_irqsave(&ti->lock, flags); + ti->running = 0; + del_timer(&ti->timer); + spin_unlock_irqrestore(&ti->lock, flags); +} + +static void ct_systimer_prepare(struct ct_timer_instance *ti) +{ + ct_systimer_stop(ti); + try_to_del_timer_sync(&ti->timer); +} + +#define ct_systimer_free ct_systimer_prepare + +static struct ct_timer_ops ct_systimer_ops = { + .init = ct_systimer_init, + .free_instance = ct_systimer_free, + .prepare = ct_systimer_prepare, + .start = ct_systimer_start, + .stop = ct_systimer_stop, +}; + + +/* + * Handling multiple streams using a global emu20k1 timer irq + */ + +#define CT_TIMER_FREQ 48000 +#define MIN_TICKS 1 +#define MAX_TICKS ((1 << 13) - 1) + +static void ct_xfitimer_irq_rearm(struct ct_timer *atimer, int ticks) +{ + struct hw *hw = atimer->atc->hw; + if (ticks > MAX_TICKS) + ticks = MAX_TICKS; + hw->set_timer_tick(hw, ticks); + if (!atimer->running) + hw->set_timer_irq(hw, 1); + atimer->running = 1; +} + +static void ct_xfitimer_irq_stop(struct ct_timer *atimer) +{ + if (atimer->running) { + struct hw *hw = atimer->atc->hw; + hw->set_timer_irq(hw, 0); + hw->set_timer_tick(hw, 0); + atimer->running = 0; + } +} + +static inline unsigned int ct_xfitimer_get_wc(struct ct_timer *atimer) +{ + struct hw *hw = atimer->atc->hw; + return hw->get_wc(hw); +} + +/* + * reprogram the timer interval; + * checks the running instance list and determines the next timer interval. + * also updates the each stream position, returns the number of streams + * to call snd_pcm_period_elapsed() appropriately + * + * call this inside the lock and irq disabled + */ +static int ct_xfitimer_reprogram(struct ct_timer *atimer) +{ + struct ct_timer_instance *ti; + unsigned int min_intr = (unsigned int)-1; + int updates = 0; + unsigned int wc, diff; + + if (list_empty(&atimer->running_head)) { + ct_xfitimer_irq_stop(atimer); + atimer->reprogram = 0; /* clear flag */ + return 0; + } + + wc = ct_xfitimer_get_wc(atimer); + diff = wc - atimer->wc; + atimer->wc = wc; + list_for_each_entry(ti, &atimer->running_head, running_list) { + if (ti->frag_count > diff) + ti->frag_count -= diff; + else { + unsigned int pos; + unsigned int period_size, rate; + + period_size = ti->substream->runtime->period_size; + rate = ti->substream->runtime->rate; + pos = ti->substream->ops->pointer(ti->substream); + if (pos / period_size != ti->position / period_size) { + ti->need_update = 1; + ti->position = pos; + updates++; + } + pos %= period_size; + pos = period_size - pos; + ti->frag_count = div_u64((u64)pos * CT_TIMER_FREQ + + rate - 1, rate); + } + if (ti->frag_count < min_intr) + min_intr = ti->frag_count; + } + + if (min_intr < MIN_TICKS) + min_intr = MIN_TICKS; + ct_xfitimer_irq_rearm(atimer, min_intr); + atimer->reprogram = 0; /* clear flag */ + return updates; +} + +/* look through the instance list and call period_elapsed if needed */ +static void ct_xfitimer_check_period(struct ct_timer *atimer) +{ + struct ct_timer_instance *ti; + unsigned long flags; + + spin_lock_irqsave(&atimer->list_lock, flags); + list_for_each_entry(ti, &atimer->instance_head, instance_list) { + if (ti->need_update) { + ti->need_update = 0; + ti->apcm->interrupt(ti->apcm); + } + } + spin_unlock_irqrestore(&atimer->list_lock, flags); +} + +/* Handle timer-interrupt */ +static void ct_xfitimer_callback(struct ct_timer *atimer) +{ + int update; + unsigned long flags; + + spin_lock_irqsave(&atimer->lock, flags); + atimer->irq_handling = 1; + do { + update = ct_xfitimer_reprogram(atimer); + spin_unlock(&atimer->lock); + if (update) + ct_xfitimer_check_period(atimer); + spin_lock(&atimer->lock); + } while (atimer->reprogram); + atimer->irq_handling = 0; + spin_unlock_irqrestore(&atimer->lock, flags); +} + +static void ct_xfitimer_prepare(struct ct_timer_instance *ti) +{ + ti->frag_count = ti->substream->runtime->period_size; + ti->need_update = 0; +} + + +/* start/stop the timer */ +static void ct_xfitimer_update(struct ct_timer *atimer) +{ + unsigned long flags; + int update; + + spin_lock_irqsave(&atimer->lock, flags); + if (atimer->irq_handling) { + /* reached from IRQ handler; let it handle later */ + atimer->reprogram = 1; + spin_unlock_irqrestore(&atimer->lock, flags); + return; + } + + ct_xfitimer_irq_stop(atimer); + update = ct_xfitimer_reprogram(atimer); + spin_unlock_irqrestore(&atimer->lock, flags); + if (update) + ct_xfitimer_check_period(atimer); +} + +static void ct_xfitimer_start(struct ct_timer_instance *ti) +{ + struct ct_timer *atimer = ti->timer_base; + unsigned long flags; + + spin_lock_irqsave(&atimer->lock, flags); + if (list_empty(&ti->running_list)) + atimer->wc = ct_xfitimer_get_wc(atimer); + list_add(&ti->running_list, &atimer->running_head); + spin_unlock_irqrestore(&atimer->lock, flags); + ct_xfitimer_update(atimer); +} + +static void ct_xfitimer_stop(struct ct_timer_instance *ti) +{ + struct ct_timer *atimer = ti->timer_base; + unsigned long flags; + + spin_lock_irqsave(&atimer->lock, flags); + list_del_init(&ti->running_list); + ti->need_update = 0; + spin_unlock_irqrestore(&atimer->lock, flags); + ct_xfitimer_update(atimer); +} + +static void ct_xfitimer_free_global(struct ct_timer *atimer) +{ + ct_xfitimer_irq_stop(atimer); +} + +static struct ct_timer_ops ct_xfitimer_ops = { + .prepare = ct_xfitimer_prepare, + .start = ct_xfitimer_start, + .stop = ct_xfitimer_stop, + .interrupt = ct_xfitimer_callback, + .free_global = ct_xfitimer_free_global, +}; + +/* + * timer instance + */ + +struct ct_timer_instance * +ct_timer_instance_new(struct ct_timer *atimer, struct ct_atc_pcm *apcm) +{ + struct ct_timer_instance *ti; + + ti = kzalloc(sizeof(*ti), GFP_KERNEL); + if (!ti) + return NULL; + spin_lock_init(&ti->lock); + INIT_LIST_HEAD(&ti->instance_list); + INIT_LIST_HEAD(&ti->running_list); + ti->timer_base = atimer; + ti->apcm = apcm; + ti->substream = apcm->substream; + if (atimer->ops->init) + atimer->ops->init(ti); + + spin_lock_irq(&atimer->list_lock); + list_add(&ti->instance_list, &atimer->instance_head); + spin_unlock_irq(&atimer->list_lock); + + return ti; +} + +void ct_timer_prepare(struct ct_timer_instance *ti) +{ + if (ti->timer_base->ops->prepare) + ti->timer_base->ops->prepare(ti); + ti->position = 0; + ti->running = 0; +} + +void ct_timer_start(struct ct_timer_instance *ti) +{ + struct ct_timer *atimer = ti->timer_base; + atimer->ops->start(ti); +} + +void ct_timer_stop(struct ct_timer_instance *ti) +{ + struct ct_timer *atimer = ti->timer_base; + atimer->ops->stop(ti); +} + +void ct_timer_instance_free(struct ct_timer_instance *ti) +{ + struct ct_timer *atimer = ti->timer_base; + + atimer->ops->stop(ti); /* to be sure */ + if (atimer->ops->free_instance) + atimer->ops->free_instance(ti); + + spin_lock_irq(&atimer->list_lock); + list_del(&ti->instance_list); + spin_unlock_irq(&atimer->list_lock); + + kfree(ti); +} + +/* + * timer manager + */ + +static void ct_timer_interrupt(void *data, unsigned int status) +{ + struct ct_timer *timer = data; + + /* Interval timer interrupt */ + if ((status & IT_INT) && timer->ops->interrupt) + timer->ops->interrupt(timer); +} + +struct ct_timer *ct_timer_new(struct ct_atc *atc) +{ + struct ct_timer *atimer; + struct hw *hw; + + atimer = kzalloc(sizeof(*atimer), GFP_KERNEL); + if (!atimer) + return NULL; + spin_lock_init(&atimer->lock); + spin_lock_init(&atimer->list_lock); + INIT_LIST_HEAD(&atimer->instance_head); + INIT_LIST_HEAD(&atimer->running_head); + atimer->atc = atc; + hw = atc->hw; + if (!use_system_timer && hw->set_timer_irq) { + snd_printd(KERN_INFO "ctxfi: Use xfi-native timer\n"); + atimer->ops = &ct_xfitimer_ops; + hw->irq_callback_data = atimer; + hw->irq_callback = ct_timer_interrupt; + } else { + snd_printd(KERN_INFO "ctxfi: Use system timer\n"); + atimer->ops = &ct_systimer_ops; + } + return atimer; +} + +void ct_timer_free(struct ct_timer *atimer) +{ + struct hw *hw = atimer->atc->hw; + hw->irq_callback = NULL; + if (atimer->ops->free_global) + atimer->ops->free_global(atimer); + kfree(atimer); +} + diff --git a/sound/pci/ctxfi/cttimer.h b/sound/pci/ctxfi/cttimer.h new file mode 100644 index 0000000..9793482 --- /dev/null +++ b/sound/pci/ctxfi/cttimer.h @@ -0,0 +1,29 @@ +/* + * Timer handling + */ + +#ifndef __CTTIMER_H +#define __CTTIMER_H + +#include +#include +#include + +struct snd_pcm_substream; +struct ct_atc; +struct ct_atc_pcm; + +struct ct_timer; +struct ct_timer_instance; + +struct ct_timer *ct_timer_new(struct ct_atc *atc); +void ct_timer_free(struct ct_timer *atimer); + +struct ct_timer_instance * +ct_timer_instance_new(struct ct_timer *atimer, struct ct_atc_pcm *apcm); +void ct_timer_instance_free(struct ct_timer_instance *ti); +void ct_timer_start(struct ct_timer_instance *ti); +void ct_timer_stop(struct ct_timer_instance *ti); +void ct_timer_prepare(struct ct_timer_instance *ti); + +#endif /* __CTTIMER_H */ diff --git a/sound/pci/ctxfi/ctvmem.c b/sound/pci/ctxfi/ctvmem.c new file mode 100644 index 0000000..67665a7 --- /dev/null +++ b/sound/pci/ctxfi/ctvmem.c @@ -0,0 +1,250 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctvmem.c + * + * @Brief + * This file contains the implementation of virtual memory management object + * for card device. + * + * @Author Liu Chun + * @Date Apr 1 2008 + */ + +#include "ctvmem.h" +#include +#include +#include +#include + +#define CT_PTES_PER_PAGE (CT_PAGE_SIZE / sizeof(void *)) +#define CT_ADDRS_PER_PAGE (CT_PTES_PER_PAGE * CT_PAGE_SIZE) + +/* * + * Find or create vm block based on requested @size. + * @size must be page aligned. + * */ +static struct ct_vm_block * +get_vm_block(struct ct_vm *vm, unsigned int size) +{ + struct ct_vm_block *block = NULL, *entry; + struct list_head *pos; + + size = CT_PAGE_ALIGN(size); + if (size > vm->size) { + printk(KERN_ERR "ctxfi: Fail! No sufficient device virtural " + "memory space available!\n"); + return NULL; + } + + mutex_lock(&vm->lock); + list_for_each(pos, &vm->unused) { + entry = list_entry(pos, struct ct_vm_block, list); + if (entry->size >= size) + break; /* found a block that is big enough */ + } + if (pos == &vm->unused) + goto out; + + if (entry->size == size) { + /* Move the vm node from unused list to used list directly */ + list_del(&entry->list); + list_add(&entry->list, &vm->used); + vm->size -= size; + block = entry; + goto out; + } + + block = kzalloc(sizeof(*block), GFP_KERNEL); + if (NULL == block) + goto out; + + block->addr = entry->addr; + block->size = size; + list_add(&block->list, &vm->used); + entry->addr += size; + entry->size -= size; + vm->size -= size; + + out: + mutex_unlock(&vm->lock); + return block; +} + +static void put_vm_block(struct ct_vm *vm, struct ct_vm_block *block) +{ + struct ct_vm_block *entry, *pre_ent; + struct list_head *pos, *pre; + + block->size = CT_PAGE_ALIGN(block->size); + + mutex_lock(&vm->lock); + list_del(&block->list); + vm->size += block->size; + + list_for_each(pos, &vm->unused) { + entry = list_entry(pos, struct ct_vm_block, list); + if (entry->addr >= (block->addr + block->size)) + break; /* found a position */ + } + if (pos == &vm->unused) { + list_add_tail(&block->list, &vm->unused); + entry = block; + } else { + if ((block->addr + block->size) == entry->addr) { + entry->addr = block->addr; + entry->size += block->size; + kfree(block); + } else { + __list_add(&block->list, pos->prev, pos); + entry = block; + } + } + + pos = &entry->list; + pre = pos->prev; + while (pre != &vm->unused) { + entry = list_entry(pos, struct ct_vm_block, list); + pre_ent = list_entry(pre, struct ct_vm_block, list); + if ((pre_ent->addr + pre_ent->size) > entry->addr) + break; + + pre_ent->size += entry->size; + list_del(pos); + kfree(entry); + pos = pre; + pre = pos->prev; + } + mutex_unlock(&vm->lock); +} + +/* Map host addr (kmalloced/vmalloced) to device logical addr. */ +static struct ct_vm_block * +ct_vm_map(struct ct_vm *vm, struct snd_pcm_substream *substream, int size) +{ + struct ct_vm_block *block; + unsigned int pte_start; + unsigned i, pages; + unsigned long *ptp; + + block = get_vm_block(vm, size); + if (block == NULL) { + printk(KERN_ERR "ctxfi: No virtual memory block that is big " + "enough to allocate!\n"); + return NULL; + } + + ptp = vm->ptp[0]; + pte_start = (block->addr >> CT_PAGE_SHIFT); + pages = block->size >> CT_PAGE_SHIFT; + for (i = 0; i < pages; i++) { + unsigned long addr; + addr = snd_pcm_sgbuf_get_addr(substream, i << CT_PAGE_SHIFT); + ptp[pte_start + i] = addr; + } + + block->size = size; + return block; +} + +static void ct_vm_unmap(struct ct_vm *vm, struct ct_vm_block *block) +{ + /* do unmapping */ + put_vm_block(vm, block); +} + +/* * + * return the host (kmalloced) addr of the @index-th device + * page talbe page on success, or NULL on failure. + * The first returned NULL indicates the termination. + * */ +static void * +ct_get_ptp_virt(struct ct_vm *vm, int index) +{ + void *addr; + + addr = (index >= CT_PTP_NUM) ? NULL : vm->ptp[index]; + + return addr; +} + +int ct_vm_create(struct ct_vm **rvm) +{ + struct ct_vm *vm; + struct ct_vm_block *block; + int i; + + *rvm = NULL; + + vm = kzalloc(sizeof(*vm), GFP_KERNEL); + if (NULL == vm) + return -ENOMEM; + + mutex_init(&vm->lock); + + /* Allocate page table pages */ + for (i = 0; i < CT_PTP_NUM; i++) { + vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (NULL == vm->ptp[i]) + break; + } + if (!i) { + /* no page table pages are allocated */ + kfree(vm); + return -ENOMEM; + } + vm->size = CT_ADDRS_PER_PAGE * i; + /* Initialise remaining ptps */ + for (; i < CT_PTP_NUM; i++) + vm->ptp[i] = NULL; + + vm->map = ct_vm_map; + vm->unmap = ct_vm_unmap; + vm->get_ptp_virt = ct_get_ptp_virt; + INIT_LIST_HEAD(&vm->unused); + INIT_LIST_HEAD(&vm->used); + block = kzalloc(sizeof(*block), GFP_KERNEL); + if (NULL != block) { + block->addr = 0; + block->size = vm->size; + list_add(&block->list, &vm->unused); + } + + *rvm = vm; + return 0; +} + +/* The caller must ensure no mapping pages are being used + * by hardware before calling this function */ +void ct_vm_destroy(struct ct_vm *vm) +{ + int i; + struct list_head *pos; + struct ct_vm_block *entry; + + /* free used and unused list nodes */ + while (!list_empty(&vm->used)) { + pos = vm->used.next; + list_del(pos); + entry = list_entry(pos, struct ct_vm_block, list); + kfree(entry); + } + while (!list_empty(&vm->unused)) { + pos = vm->unused.next; + list_del(pos); + entry = list_entry(pos, struct ct_vm_block, list); + kfree(entry); + } + + /* free allocated page table pages */ + for (i = 0; i < CT_PTP_NUM; i++) + kfree(vm->ptp[i]); + + vm->size = 0; + + kfree(vm); +} diff --git a/sound/pci/ctxfi/ctvmem.h b/sound/pci/ctxfi/ctvmem.h new file mode 100644 index 0000000..01e4fd0 --- /dev/null +++ b/sound/pci/ctxfi/ctvmem.h @@ -0,0 +1,61 @@ +/** + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + * + * @File ctvmem.h + * + * @Brief + * This file contains the definition of virtual memory management object + * for card device. + * + * @Author Liu Chun + * @Date Mar 28 2008 + */ + +#ifndef CTVMEM_H +#define CTVMEM_H + +#define CT_PTP_NUM 1 /* num of device page table pages */ + +#include +#include + +/* The chip can handle the page table of 4k pages + * (emu20k1 can handle even 8k pages, but we don't use it right now) + */ +#define CT_PAGE_SIZE 4096 +#define CT_PAGE_SHIFT 12 +#define CT_PAGE_MASK (~(PAGE_SIZE - 1)) +#define CT_PAGE_ALIGN(addr) ALIGN(addr, CT_PAGE_SIZE) + +struct ct_vm_block { + unsigned int addr; /* starting logical addr of this block */ + unsigned int size; /* size of this device virtual mem block */ + struct list_head list; +}; + +struct snd_pcm_substream; + +/* Virtual memory management object for card device */ +struct ct_vm { + void *ptp[CT_PTP_NUM]; /* Device page table pages */ + unsigned int size; /* Available addr space in bytes */ + struct list_head unused; /* List of unused blocks */ + struct list_head used; /* List of used blocks */ + struct mutex lock; + + /* Map host addr (kmalloced/vmalloced) to device logical addr. */ + struct ct_vm_block *(*map)(struct ct_vm *, struct snd_pcm_substream *, + int size); + /* Unmap device logical addr area. */ + void (*unmap)(struct ct_vm *, struct ct_vm_block *block); + void *(*get_ptp_virt)(struct ct_vm *vm, int index); +}; + +int ct_vm_create(struct ct_vm **rvm); +void ct_vm_destroy(struct ct_vm *vm); + +#endif /* CTVMEM_H */ diff --git a/sound/pci/ctxfi/xfi.c b/sound/pci/ctxfi/xfi.c new file mode 100644 index 0000000..2d3dd89 --- /dev/null +++ b/sound/pci/ctxfi/xfi.c @@ -0,0 +1,142 @@ +/* + * xfi linux driver. + * + * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved. + * + * This source file is released under GPL v2 license (no other versions). + * See the COPYING file included in the main directory of this source + * distribution for the license terms and conditions. + */ + +#include +#include +#include +#include +#include +#include +#include "ctatc.h" +#include "cthardware.h" + +MODULE_AUTHOR("Creative Technology Ltd"); +MODULE_DESCRIPTION("X-Fi driver version 1.03"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("{{Creative Labs, Sound Blaster X-Fi}"); + +static unsigned int reference_rate = 48000; +static unsigned int multiple = 2; +MODULE_PARM_DESC(reference_rate, "Reference rate (default=48000)"); +module_param(reference_rate, uint, S_IRUGO); +MODULE_PARM_DESC(multiple, "Rate multiplier (default=2)"); +module_param(multiple, uint, S_IRUGO); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for Creative X-Fi driver"); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for Creative X-Fi driver"); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable Creative X-Fi driver"); + +static struct pci_device_id ct_pci_dev_ids[] = { + /* only X-Fi is supported, so... */ + { PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K1), + .driver_data = ATC20K1, + }, + { PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K2), + .driver_data = ATC20K2, + }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, ct_pci_dev_ids); + +static int __devinit +ct_card_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) +{ + static int dev; + struct snd_card *card; + struct ct_atc *atc; + int err; + + if (dev >= SNDRV_CARDS) + return -ENODEV; + + if (!enable[dev]) { + dev++; + return -ENOENT; + } + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err) + return err; + if ((reference_rate != 48000) && (reference_rate != 44100)) { + printk(KERN_ERR "ctxfi: Invalid reference_rate value %u!!!\n", + reference_rate); + printk(KERN_ERR "ctxfi: The valid values for reference_rate " + "are 48000 and 44100, Value 48000 is assumed.\n"); + reference_rate = 48000; + } + if ((multiple != 1) && (multiple != 2)) { + printk(KERN_ERR "ctxfi: Invalid multiple value %u!!!\n", + multiple); + printk(KERN_ERR "ctxfi: The valid values for multiple are " + "1 and 2, Value 2 is assumed.\n"); + multiple = 2; + } + err = ct_atc_create(card, pci, reference_rate, multiple, + pci_id->driver_data, &atc); + if (err < 0) + goto error; + + card->private_data = atc; + + /* Create alsa devices supported by this card */ + err = ct_atc_create_alsa_devs(atc); + if (err < 0) + goto error; + + strcpy(card->driver, "SB-XFi"); + strcpy(card->shortname, "Creative X-Fi"); + snprintf(card->longname, sizeof(card->longname), "%s %s %s", + card->shortname, atc->chip_name, atc->model_name); + + err = snd_card_register(card); + if (err < 0) + goto error; + + pci_set_drvdata(pci, card); + dev++; + + return 0; + +error: + snd_card_free(card); + return err; +} + +static void __devexit ct_card_remove(struct pci_dev *pci) +{ + snd_card_free(pci_get_drvdata(pci)); + pci_set_drvdata(pci, NULL); +} + +static struct pci_driver ct_driver = { + .name = "SB-XFi", + .id_table = ct_pci_dev_ids, + .probe = ct_card_probe, + .remove = __devexit_p(ct_card_remove), +}; + +static int __init ct_card_init(void) +{ + return pci_register_driver(&ct_driver); +} + +static void __exit ct_card_exit(void) +{ + pci_unregister_driver(&ct_driver); +} + +module_init(ct_card_init) +module_exit(ct_card_exit) diff --git a/sound/pci/emu10k1/Makefile b/sound/pci/emu10k1/Makefile index cf2d563..fc5591e 100644 --- a/sound/pci/emu10k1/Makefile +++ b/sound/pci/emu10k1/Makefile @@ -9,15 +9,7 @@ snd-emu10k1-objs := emu10k1.o emu10k1_main.o \ snd-emu10k1-synth-objs := emu10k1_synth.o emu10k1_callback.o emu10k1_patch.o snd-emu10k1x-objs := emu10k1x.o -# -# this function returns: -# "m" - CONFIG_SND_SEQUENCER is m -# - CONFIG_SND_SEQUENCER is undefined -# otherwise parameter #1 value -# -sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1))) - # Toplevel Module Dependency obj-$(CONFIG_SND_EMU10K1) += snd-emu10k1.o -obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-emu10k1-synth.o +obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-emu10k1-synth.o obj-$(CONFIG_SND_EMU10K1X) += snd-emu10k1x.o diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index 1970f0e..4d3ad79 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -858,7 +858,6 @@ static int __devinit snd_emu10k1x_pcm(struct emu10k1x *emu, int device, struct s } pcm->info_flags = 0; - pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX; switch(device) { case 0: strcpy(pcm->name, "EMU10K1X Front"); diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c index 78f62fd..55b83ef 100644 --- a/sound/pci/emu10k1/emupcm.c +++ b/sound/pci/emu10k1/emupcm.c @@ -1736,7 +1736,7 @@ static struct snd_pcm_hardware snd_emu10k1_fx8010_playback = .buffer_bytes_max = (128*1024), .period_bytes_min = 1024, .period_bytes_max = (128*1024), - .periods_min = 1, + .periods_min = 2, .periods_max = 1024, .fifo_size = 0, }; diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index eb2a19b..c710150 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -139,6 +139,19 @@ config SND_HDA_CODEC_CONEXANT snd-hda-codec-conexant. This module is automatically loaded at probing. +config SND_HDA_CODEC_CA0110 + bool "Build Creative CA0110-IBG codec support" + depends on SND_HDA_INTEL + default y + help + Say Y here to include Creative CA0110-IBG codec support in + snd-hda-intel driver, found on some Creative X-Fi cards. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-ca0110. + This module is automatically loaded at probing. + config SND_HDA_CODEC_CMEDIA bool "Build C-Media HD-audio codec support" default y diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 50f9d09..e3081d4 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -13,6 +13,7 @@ snd-hda-codec-analog-objs := patch_analog.o snd-hda-codec-idt-objs := patch_sigmatel.o snd-hda-codec-si3054-objs := patch_si3054.o snd-hda-codec-atihdmi-objs := patch_atihdmi.o +snd-hda-codec-ca0110-objs := patch_ca0110.o snd-hda-codec-conexant-objs := patch_conexant.o snd-hda-codec-via-objs := patch_via.o snd-hda-codec-nvhdmi-objs := patch_nvhdmi.o @@ -40,6 +41,9 @@ endif ifdef CONFIG_SND_HDA_CODEC_ATIHDMI obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o endif +ifdef CONFIG_SND_HDA_CODEC_CA0110 +obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o +endif ifdef CONFIG_SND_HDA_CODEC_CONEXANT obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-conexant.o endif diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 4de5bac..29272f2 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -45,6 +45,46 @@ static void snd_hda_generate_beep(struct work_struct *work) AC_VERB_SET_BEEP_CONTROL, beep->tone); } +/* (non-standard) Linear beep tone calculation for IDT/STAC codecs + * + * The tone frequency of beep generator on IDT/STAC codecs is + * defined from the 8bit tone parameter, in Hz, + * freq = 48000 * (257 - tone) / 1024 + * that is from 12kHz to 93.75kHz in step of 46.875 hz + */ +static int beep_linear_tone(struct hda_beep *beep, int hz) +{ + hz *= 1000; /* fixed point */ + hz = hz - DIGBEEP_HZ_MIN; + if (hz < 0) + hz = 0; /* turn off PC beep*/ + else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN)) + hz = 0xff; + else { + hz /= DIGBEEP_HZ_STEP; + hz++; + } + return hz; +} + +/* HD-audio standard beep tone parameter calculation + * + * The tone frequency in Hz is calculated as + * freq = 48000 / (tone * 4) + * from 47Hz to 12kHz + */ +static int beep_standard_tone(struct hda_beep *beep, int hz) +{ + if (hz <= 0) + return 0; /* disabled */ + hz = 12000 / hz; + if (hz > 0xff) + return 0xff; + if (hz <= 0) + return 1; + return hz; +} + static int snd_hda_beep_event(struct input_dev *dev, unsigned int type, unsigned int code, int hz) { @@ -55,21 +95,14 @@ static int snd_hda_beep_event(struct input_dev *dev, unsigned int type, if (hz) hz = 1000; case SND_TONE: - hz *= 1000; /* fixed point */ - hz = hz - DIGBEEP_HZ_MIN; - if (hz < 0) - hz = 0; /* turn off PC beep*/ - else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN)) - hz = 0xff; - else { - hz /= DIGBEEP_HZ_STEP; - hz++; - } + if (beep->linear_tone) + beep->tone = beep_linear_tone(beep, hz); + else + beep->tone = beep_standard_tone(beep, hz); break; default: return -1; } - beep->tone = hz; /* schedule beep event */ schedule_work(&beep->beep_work); diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h index 51bf6a5..0c3de78 100644 --- a/sound/pci/hda/hda_beep.h +++ b/sound/pci/hda/hda_beep.h @@ -30,8 +30,9 @@ struct hda_beep { struct hda_codec *codec; char phys[32]; int tone; - int nid; - int enabled; + hda_nid_t nid; + unsigned int enabled:1; + unsigned int linear_tone:1; /* linear tone for IDT/STAC codec */ struct work_struct beep_work; /* scheduled task for beep event */ }; diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 8820faf..562403a 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -48,6 +48,7 @@ static struct hda_vendor_id hda_vendor_ids[] = { { 0x1095, "Silicon Image" }, { 0x10de, "Nvidia" }, { 0x10ec, "Realtek" }, + { 0x1102, "Creative" }, { 0x1106, "VIA" }, { 0x111d, "IDT" }, { 0x11c1, "LSI" }, @@ -157,6 +158,39 @@ make_codec_cmd(struct hda_codec *codec, hda_nid_t nid, int direct, return val; } +/* + * Send and receive a verb + */ +static int codec_exec_verb(struct hda_codec *codec, unsigned int cmd, + unsigned int *res) +{ + struct hda_bus *bus = codec->bus; + int err; + + if (res) + *res = -1; + again: + snd_hda_power_up(codec); + mutex_lock(&bus->cmd_mutex); + err = bus->ops.command(bus, cmd); + if (!err && res) + *res = bus->ops.get_response(bus); + mutex_unlock(&bus->cmd_mutex); + snd_hda_power_down(codec); + if (res && *res == -1 && bus->rirb_error) { + if (bus->response_reset) { + snd_printd("hda_codec: resetting BUS due to " + "fatal communication error\n"); + bus->ops.bus_reset(bus); + } + goto again; + } + /* clear reset-flag when the communication gets recovered */ + if (!err) + bus->response_reset = 0; + return err; +} + /** * snd_hda_codec_read - send a command and get the response * @codec: the HDA codec @@ -173,18 +207,9 @@ unsigned int snd_hda_codec_read(struct hda_codec *codec, hda_nid_t nid, int direct, unsigned int verb, unsigned int parm) { - struct hda_bus *bus = codec->bus; + unsigned cmd = make_codec_cmd(codec, nid, direct, verb, parm); unsigned int res; - - res = make_codec_cmd(codec, nid, direct, verb, parm); - snd_hda_power_up(codec); - mutex_lock(&bus->cmd_mutex); - if (!bus->ops.command(bus, res)) - res = bus->ops.get_response(bus); - else - res = (unsigned int)-1; - mutex_unlock(&bus->cmd_mutex); - snd_hda_power_down(codec); + codec_exec_verb(codec, cmd, &res); return res; } EXPORT_SYMBOL_HDA(snd_hda_codec_read); @@ -204,17 +229,10 @@ EXPORT_SYMBOL_HDA(snd_hda_codec_read); int snd_hda_codec_write(struct hda_codec *codec, hda_nid_t nid, int direct, unsigned int verb, unsigned int parm) { - struct hda_bus *bus = codec->bus; + unsigned int cmd = make_codec_cmd(codec, nid, direct, verb, parm); unsigned int res; - int err; - - res = make_codec_cmd(codec, nid, direct, verb, parm); - snd_hda_power_up(codec); - mutex_lock(&bus->cmd_mutex); - err = bus->ops.command(bus, res); - mutex_unlock(&bus->cmd_mutex); - snd_hda_power_down(codec); - return err; + return codec_exec_verb(codec, cmd, + codec->bus->sync_write ? &res : NULL); } EXPORT_SYMBOL_HDA(snd_hda_codec_write); @@ -613,7 +631,10 @@ static int get_codec_name(struct hda_codec *codec) const struct hda_vendor_id *c; const char *vendor = NULL; u16 vendor_id = codec->vendor_id >> 16; - char tmp[16], name[32]; + char tmp[16]; + + if (codec->vendor_name) + goto get_chip_name; for (c = hda_vendor_ids; c->id; c++) { if (c->id == vendor_id) { @@ -625,14 +646,21 @@ static int get_codec_name(struct hda_codec *codec) sprintf(tmp, "Generic %04x", vendor_id); vendor = tmp; } + codec->vendor_name = kstrdup(vendor, GFP_KERNEL); + if (!codec->vendor_name) + return -ENOMEM; + + get_chip_name: + if (codec->chip_name) + return 0; + if (codec->preset && codec->preset->name) - snprintf(name, sizeof(name), "%s %s", vendor, - codec->preset->name); - else - snprintf(name, sizeof(name), "%s ID %x", vendor, - codec->vendor_id & 0xffff); - codec->name = kstrdup(name, GFP_KERNEL); - if (!codec->name) + codec->chip_name = kstrdup(codec->preset->name, GFP_KERNEL); + else { + sprintf(tmp, "ID %x", codec->vendor_id & 0xffff); + codec->chip_name = kstrdup(tmp, GFP_KERNEL); + } + if (!codec->chip_name) return -ENOMEM; return 0; } @@ -838,7 +866,8 @@ static void snd_hda_codec_free(struct hda_codec *codec) module_put(codec->owner); free_hda_cache(&codec->amp_cache); free_hda_cache(&codec->cmd_cache); - kfree(codec->name); + kfree(codec->vendor_name); + kfree(codec->chip_name); kfree(codec->modelname); kfree(codec->wcaps); kfree(codec); @@ -979,15 +1008,16 @@ int snd_hda_codec_configure(struct hda_codec *codec) int err; codec->preset = find_codec_preset(codec); - if (!codec->name) { + if (!codec->vendor_name || !codec->chip_name) { err = get_codec_name(codec); if (err < 0) return err; } /* audio codec should override the mixer name */ if (codec->afg || !*codec->bus->card->mixername) - strlcpy(codec->bus->card->mixername, codec->name, - sizeof(codec->bus->card->mixername)); + snprintf(codec->bus->card->mixername, + sizeof(codec->bus->card->mixername), + "%s %s", codec->vendor_name, codec->chip_name); if (is_generic_config(codec)) { err = snd_hda_parse_generic_codec(codec); @@ -1055,6 +1085,8 @@ EXPORT_SYMBOL_HDA(snd_hda_codec_cleanup_stream); /* FIXME: more better hash key? */ #define HDA_HASH_KEY(nid,dir,idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24)) #define HDA_HASH_PINCAP_KEY(nid) (u32)((nid) + (0x02 << 24)) +#define HDA_HASH_PARPCM_KEY(nid) (u32)((nid) + (0x03 << 24)) +#define HDA_HASH_PARSTR_KEY(nid) (u32)((nid) + (0x04 << 24)) #define INFO_AMP_CAPS (1<<0) #define INFO_AMP_VOL(ch) (1 << (1 + (ch))) @@ -1145,19 +1177,32 @@ int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir, } EXPORT_SYMBOL_HDA(snd_hda_override_amp_caps); -u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid) +static unsigned int +query_caps_hash(struct hda_codec *codec, hda_nid_t nid, u32 key, + unsigned int (*func)(struct hda_codec *, hda_nid_t)) { struct hda_amp_info *info; - info = get_alloc_amp_hash(codec, HDA_HASH_PINCAP_KEY(nid)); + info = get_alloc_amp_hash(codec, key); if (!info) return 0; if (!info->head.val) { - info->amp_caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP); info->head.val |= INFO_AMP_CAPS; + info->amp_caps = func(codec, nid); } return info->amp_caps; } + +static unsigned int read_pin_cap(struct hda_codec *codec, hda_nid_t nid) +{ + return snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP); +} + +u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid) +{ + return query_caps_hash(codec, nid, HDA_HASH_PINCAP_KEY(nid), + read_pin_cap); +} EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps); /* @@ -1432,6 +1477,8 @@ _snd_hda_find_mixer_ctl(struct hda_codec *codec, memset(&id, 0, sizeof(id)); id.iface = SNDRV_CTL_ELEM_IFACE_MIXER; id.index = idx; + if (snd_BUG_ON(strlen(name) >= sizeof(id.name))) + return NULL; strcpy(id.name, name); return snd_ctl_find_id(codec->bus->card, &id); } @@ -2242,28 +2289,22 @@ EXPORT_SYMBOL_HDA(snd_hda_create_spdif_in_ctls); int snd_hda_codec_write_cache(struct hda_codec *codec, hda_nid_t nid, int direct, unsigned int verb, unsigned int parm) { - struct hda_bus *bus = codec->bus; - unsigned int res; - int err; + int err = snd_hda_codec_write(codec, nid, direct, verb, parm); + struct hda_cache_head *c; + u32 key; - res = make_codec_cmd(codec, nid, direct, verb, parm); - snd_hda_power_up(codec); - mutex_lock(&bus->cmd_mutex); - err = bus->ops.command(bus, res); - if (!err) { - struct hda_cache_head *c; - u32 key; - /* parm may contain the verb stuff for get/set amp */ - verb = verb | (parm >> 8); - parm &= 0xff; - key = build_cmd_cache_key(nid, verb); - c = get_alloc_hash(&codec->cmd_cache, key); - if (c) - c->val = parm; - } - mutex_unlock(&bus->cmd_mutex); - snd_hda_power_down(codec); - return err; + if (err < 0) + return err; + /* parm may contain the verb stuff for get/set amp */ + verb = verb | (parm >> 8); + parm &= 0xff; + key = build_cmd_cache_key(nid, verb); + mutex_lock(&codec->bus->cmd_mutex); + c = get_alloc_hash(&codec->cmd_cache, key); + if (c) + c->val = parm; + mutex_unlock(&codec->bus->cmd_mutex); + return 0; } EXPORT_SYMBOL_HDA(snd_hda_codec_write_cache); @@ -2321,7 +2362,8 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg, if (wcaps & AC_WCAP_POWER) { unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; - if (wid_type == AC_WID_PIN) { + if (power_state == AC_PWRST_D3 && + wid_type == AC_WID_PIN) { unsigned int pincap; /* * don't power down the widget if it controls @@ -2333,7 +2375,7 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg, nid, 0, AC_VERB_GET_EAPD_BTLENABLE, 0); eapd &= 0x02; - if (power_state == AC_PWRST_D3 && eapd) + if (eapd) continue; } } @@ -2544,6 +2586,41 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate, } EXPORT_SYMBOL_HDA(snd_hda_calc_stream_format); +static unsigned int get_pcm_param(struct hda_codec *codec, hda_nid_t nid) +{ + unsigned int val = 0; + if (nid != codec->afg && + (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD)) + val = snd_hda_param_read(codec, nid, AC_PAR_PCM); + if (!val || val == -1) + val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM); + if (!val || val == -1) + return 0; + return val; +} + +static unsigned int query_pcm_param(struct hda_codec *codec, hda_nid_t nid) +{ + return query_caps_hash(codec, nid, HDA_HASH_PARPCM_KEY(nid), + get_pcm_param); +} + +static unsigned int get_stream_param(struct hda_codec *codec, hda_nid_t nid) +{ + unsigned int streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM); + if (!streams || streams == -1) + streams = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM); + if (!streams || streams == -1) + return 0; + return streams; +} + +static unsigned int query_stream_param(struct hda_codec *codec, hda_nid_t nid) +{ + return query_caps_hash(codec, nid, HDA_HASH_PARSTR_KEY(nid), + get_stream_param); +} + /** * snd_hda_query_supported_pcm - query the supported PCM rates and formats * @codec: the HDA codec @@ -2562,15 +2639,8 @@ static int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid, { unsigned int i, val, wcaps; - val = 0; wcaps = get_wcaps(codec, nid); - if (nid != codec->afg && (wcaps & AC_WCAP_FORMAT_OVRD)) { - val = snd_hda_param_read(codec, nid, AC_PAR_PCM); - if (val == -1) - return -EIO; - } - if (!val) - val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM); + val = query_pcm_param(codec, nid); if (ratesp) { u32 rates = 0; @@ -2592,15 +2662,9 @@ static int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid, u64 formats = 0; unsigned int streams, bps; - streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM); - if (streams == -1) + streams = query_stream_param(codec, nid); + if (!streams) return -EIO; - if (!streams) { - streams = snd_hda_param_read(codec, codec->afg, - AC_PAR_STREAM); - if (streams == -1) - return -EIO; - } bps = 0; if (streams & AC_SUPFMT_PCM) { @@ -2674,17 +2738,9 @@ int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid, int i; unsigned int val = 0, rate, stream; - if (nid != codec->afg && - (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD)) { - val = snd_hda_param_read(codec, nid, AC_PAR_PCM); - if (val == -1) - return 0; - } - if (!val) { - val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM); - if (val == -1) - return 0; - } + val = query_pcm_param(codec, nid); + if (!val) + return 0; rate = format & 0xff00; for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++) @@ -2696,12 +2752,8 @@ int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid, if (i >= AC_PAR_PCM_RATE_BITS) return 0; - stream = snd_hda_param_read(codec, nid, AC_PAR_STREAM); - if (stream == -1) - return 0; - if (!stream && nid != codec->afg) - stream = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM); - if (!stream || stream == -1) + stream = query_stream_param(codec, nid); + if (!stream) return 0; if (stream & AC_SUPFMT_PCM) { @@ -3835,11 +3887,10 @@ EXPORT_SYMBOL_HDA(auto_pin_cfg_labels); /** * snd_hda_suspend - suspend the codecs * @bus: the HDA bus - * @state: suspsend state * * Returns 0 if successful. */ -int snd_hda_suspend(struct hda_bus *bus, pm_message_t state) +int snd_hda_suspend(struct hda_bus *bus) { struct hda_codec *codec; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 2fdecf4..cad79ef 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -574,6 +574,8 @@ struct hda_bus_ops { /* attach a PCM stream */ int (*attach_pcm)(struct hda_bus *bus, struct hda_codec *codec, struct hda_pcm *pcm); + /* reset bus for retry verb */ + void (*bus_reset)(struct hda_bus *bus); #ifdef CONFIG_SND_HDA_POWER_SAVE /* notify power-up/down from codec to controller */ void (*pm_notify)(struct hda_bus *bus); @@ -622,7 +624,13 @@ struct hda_bus { /* misc op flags */ unsigned int needs_damn_long_delay :1; + unsigned int allow_bus_reset:1; /* allow bus reset at fatal error */ + unsigned int sync_write:1; /* sync after verb write */ + /* status for codec/controller */ unsigned int shutdown :1; /* being unloaded */ + unsigned int rirb_error:1; /* error in codec communication */ + unsigned int response_reset:1; /* controller was reset */ + unsigned int in_reset:1; /* during reset operation */ }; /* @@ -747,7 +755,8 @@ struct hda_codec { /* detected preset */ const struct hda_codec_preset *preset; struct module *owner; - const char *name; /* codec name */ + const char *vendor_name; /* codec vendor name */ + const char *chip_name; /* codec chip name */ const char *modelname; /* model name for preset */ /* set by patch */ @@ -905,7 +914,7 @@ void snd_hda_get_codec_name(struct hda_codec *codec, char *name, int namelen); * power management */ #ifdef CONFIG_PM -int snd_hda_suspend(struct hda_bus *bus, pm_message_t state); +int snd_hda_suspend(struct hda_bus *bus); int snd_hda_resume(struct hda_bus *bus); #endif diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index 1c57505..6812fbe 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -242,7 +242,8 @@ CODEC_INFO_SHOW(subsystem_id); CODEC_INFO_SHOW(revision_id); CODEC_INFO_SHOW(afg); CODEC_INFO_SHOW(mfg); -CODEC_INFO_STR_SHOW(name); +CODEC_INFO_STR_SHOW(vendor_name); +CODEC_INFO_STR_SHOW(chip_name); CODEC_INFO_STR_SHOW(modelname); #define CODEC_INFO_STORE(type) \ @@ -275,7 +276,8 @@ static ssize_t type##_store(struct device *dev, \ CODEC_INFO_STORE(vendor_id); CODEC_INFO_STORE(subsystem_id); CODEC_INFO_STORE(revision_id); -CODEC_INFO_STR_STORE(name); +CODEC_INFO_STR_STORE(vendor_name); +CODEC_INFO_STR_STORE(chip_name); CODEC_INFO_STR_STORE(modelname); #define CODEC_ACTION_STORE(type) \ @@ -499,7 +501,8 @@ static struct device_attribute codec_attrs[] = { CODEC_ATTR_RW(revision_id), CODEC_ATTR_RO(afg), CODEC_ATTR_RO(mfg), - CODEC_ATTR_RW(name), + CODEC_ATTR_RW(vendor_name), + CODEC_ATTR_RW(chip_name), CODEC_ATTR_RW(modelname), CODEC_ATTR_RW(init_verbs), CODEC_ATTR_RW(hints), diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 3128e1a..4e9ea70 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -128,21 +128,33 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6}," "{ULI, M5461}}"); MODULE_DESCRIPTION("Intel HDA driver"); +#ifdef CONFIG_SND_VERBOSE_PRINTK +#define SFX /* nop */ +#else #define SFX "hda-intel: " - +#endif /* * registers */ #define ICH6_REG_GCAP 0x00 +#define ICH6_GCAP_64OK (1 << 0) /* 64bit address support */ +#define ICH6_GCAP_NSDO (3 << 1) /* # of serial data out signals */ +#define ICH6_GCAP_BSS (31 << 3) /* # of bidirectional streams */ +#define ICH6_GCAP_ISS (15 << 8) /* # of input streams */ +#define ICH6_GCAP_OSS (15 << 12) /* # of output streams */ #define ICH6_REG_VMIN 0x02 #define ICH6_REG_VMAJ 0x03 #define ICH6_REG_OUTPAY 0x04 #define ICH6_REG_INPAY 0x06 #define ICH6_REG_GCTL 0x08 +#define ICH6_GCTL_RESET (1 << 0) /* controller reset */ +#define ICH6_GCTL_FCNTRL (1 << 1) /* flush control */ +#define ICH6_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ #define ICH6_REG_WAKEEN 0x0c #define ICH6_REG_STATESTS 0x0e #define ICH6_REG_GSTS 0x10 +#define ICH6_GSTS_FSTS (1 << 1) /* flush status */ #define ICH6_REG_INTCTL 0x20 #define ICH6_REG_INTSTS 0x24 #define ICH6_REG_WALCLK 0x30 @@ -150,17 +162,27 @@ MODULE_DESCRIPTION("Intel HDA driver"); #define ICH6_REG_CORBLBASE 0x40 #define ICH6_REG_CORBUBASE 0x44 #define ICH6_REG_CORBWP 0x48 -#define ICH6_REG_CORBRP 0x4A +#define ICH6_REG_CORBRP 0x4a +#define ICH6_CORBRP_RST (1 << 15) /* read pointer reset */ #define ICH6_REG_CORBCTL 0x4c +#define ICH6_CORBCTL_RUN (1 << 1) /* enable DMA */ +#define ICH6_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ #define ICH6_REG_CORBSTS 0x4d +#define ICH6_CORBSTS_CMEI (1 << 0) /* memory error indication */ #define ICH6_REG_CORBSIZE 0x4e #define ICH6_REG_RIRBLBASE 0x50 #define ICH6_REG_RIRBUBASE 0x54 #define ICH6_REG_RIRBWP 0x58 +#define ICH6_RIRBWP_RST (1 << 15) /* write pointer reset */ #define ICH6_REG_RINTCNT 0x5a #define ICH6_REG_RIRBCTL 0x5c +#define ICH6_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ +#define ICH6_RBCTL_DMA_EN (1 << 1) /* enable DMA */ +#define ICH6_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ #define ICH6_REG_RIRBSTS 0x5d +#define ICH6_RBSTS_IRQ (1 << 0) /* response irq */ +#define ICH6_RBSTS_OVERRUN (1 << 2) /* overrun irq */ #define ICH6_REG_RIRBSIZE 0x5e #define ICH6_REG_IC 0x60 @@ -257,16 +279,6 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; #define ICH6_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ #define ICH6_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ -/* GCTL unsolicited response enable bit */ -#define ICH6_GCTL_UREN (1<<8) - -/* GCTL reset bit */ -#define ICH6_GCTL_RESET (1<<0) - -/* CORB/RIRB control, read/write pointer */ -#define ICH6_RBCTL_DMA_EN 0x02 /* enable DMA */ -#define ICH6_RBCTL_IRQ_EN 0x01 /* enable IRQ */ -#define ICH6_RBRWP_CLR 0x8000 /* read/write pointer clear */ /* below are so far hardcoded - should read registers in future */ #define ICH6_MAX_CORB_ENTRIES 256 #define ICH6_MAX_RIRB_ENTRIES 256 @@ -512,25 +524,25 @@ static void azx_init_cmd_io(struct azx *chip) /* set the corb write pointer to 0 */ azx_writew(chip, CORBWP, 0); /* reset the corb hw read pointer */ - azx_writew(chip, CORBRP, ICH6_RBRWP_CLR); + azx_writew(chip, CORBRP, ICH6_CORBRP_RST); /* enable corb dma */ - azx_writeb(chip, CORBCTL, ICH6_RBCTL_DMA_EN); + azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN); /* RIRB set up */ chip->rirb.addr = chip->rb.addr + 2048; chip->rirb.buf = (u32 *)(chip->rb.area + 2048); + chip->rirb.wp = chip->rirb.rp = chip->rirb.cmds = 0; azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr); azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr)); /* set the rirb size to 256 entries (ULI requires explicitly) */ azx_writeb(chip, RIRBSIZE, 0x02); /* reset the rirb hw write pointer */ - azx_writew(chip, RIRBWP, ICH6_RBRWP_CLR); + azx_writew(chip, RIRBWP, ICH6_RIRBWP_RST); /* set N=1, get RIRB response interrupt for new entry */ azx_writew(chip, RINTCNT, 1); /* enable rirb dma and response irq */ azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN); - chip->rirb.rp = chip->rirb.cmds = 0; } static void azx_free_cmd_io(struct azx *chip) @@ -606,6 +618,7 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus) } if (!chip->rirb.cmds) { smp_rmb(); + bus->rirb_error = 0; return chip->rirb.res; /* the last value */ } if (time_after(jiffies, timeout)) @@ -619,19 +632,21 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus) } if (chip->msi) { - snd_printk(KERN_WARNING "hda_intel: No response from codec, " + snd_printk(KERN_WARNING SFX "No response from codec, " "disabling MSI: last cmd=0x%08x\n", chip->last_cmd); free_irq(chip->irq, chip); chip->irq = -1; pci_disable_msi(chip->pci); chip->msi = 0; - if (azx_acquire_irq(chip, 1) < 0) + if (azx_acquire_irq(chip, 1) < 0) { + bus->rirb_error = 1; return -1; + } goto again; } if (!chip->polling_mode) { - snd_printk(KERN_WARNING "hda_intel: azx_get_response timeout, " + snd_printk(KERN_WARNING SFX "azx_get_response timeout, " "switching to polling mode: last cmd=0x%08x\n", chip->last_cmd); chip->polling_mode = 1; @@ -646,14 +661,23 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus) return -1; } + /* a fatal communication error; need either to reset or to fallback + * to the single_cmd mode + */ + bus->rirb_error = 1; + if (bus->allow_bus_reset && !bus->response_reset && !bus->in_reset) { + bus->response_reset = 1; + return -1; /* give a chance to retry */ + } + snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, " "switching to single_cmd mode: last cmd=0x%08x\n", chip->last_cmd); - chip->rirb.rp = azx_readb(chip, RIRBWP); - chip->rirb.cmds = 0; - /* switch to single_cmd mode */ chip->single_cmd = 1; + bus->response_reset = 0; + /* re-initialize CORB/RIRB */ azx_free_cmd_io(chip); + azx_init_cmd_io(chip); return -1; } @@ -667,12 +691,34 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus) * I left the codes, however, for debugging/testing purposes. */ +/* receive a response */ +static int azx_single_wait_for_response(struct azx *chip) +{ + int timeout = 50; + + while (timeout--) { + /* check IRV busy bit */ + if (azx_readw(chip, IRS) & ICH6_IRS_VALID) { + /* reuse rirb.res as the response return value */ + chip->rirb.res = azx_readl(chip, IR); + return 0; + } + udelay(1); + } + if (printk_ratelimit()) + snd_printd(SFX "get_response timeout: IRS=0x%x\n", + azx_readw(chip, IRS)); + chip->rirb.res = -1; + return -EIO; +} + /* send a command */ static int azx_single_send_cmd(struct hda_bus *bus, u32 val) { struct azx *chip = bus->private_data; int timeout = 50; + bus->rirb_error = 0; while (timeout--) { /* check ICB busy bit */ if (!((azx_readw(chip, IRS) & ICH6_IRS_BUSY))) { @@ -682,7 +728,7 @@ static int azx_single_send_cmd(struct hda_bus *bus, u32 val) azx_writel(chip, IC, val); azx_writew(chip, IRS, azx_readw(chip, IRS) | ICH6_IRS_BUSY); - return 0; + return azx_single_wait_for_response(chip); } udelay(1); } @@ -696,18 +742,7 @@ static int azx_single_send_cmd(struct hda_bus *bus, u32 val) static unsigned int azx_single_get_response(struct hda_bus *bus) { struct azx *chip = bus->private_data; - int timeout = 50; - - while (timeout--) { - /* check IRV busy bit */ - if (azx_readw(chip, IRS) & ICH6_IRS_VALID) - return azx_readl(chip, IR); - udelay(1); - } - if (printk_ratelimit()) - snd_printd(SFX "get_response timeout: IRS=0x%x\n", - azx_readw(chip, IRS)); - return (unsigned int)-1; + return chip->rirb.res; } /* @@ -775,17 +810,17 @@ static int azx_reset(struct azx *chip) /* check to see if controller is ready */ if (!azx_readb(chip, GCTL)) { - snd_printd("azx_reset: controller not ready!\n"); + snd_printd(SFX "azx_reset: controller not ready!\n"); return -EBUSY; } /* Accept unsolicited responses */ - azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UREN); + azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL); /* detect codecs */ if (!chip->codec_mask) { chip->codec_mask = azx_readw(chip, STATESTS); - snd_printdd("codec_mask = 0x%x\n", chip->codec_mask); + snd_printdd(SFX "codec_mask = 0x%x\n", chip->codec_mask); } return 0; @@ -895,8 +930,7 @@ static void azx_init_chip(struct azx *chip) azx_int_enable(chip); /* initialize the codec command I/O */ - if (!chip->single_cmd) - azx_init_cmd_io(chip); + azx_init_cmd_io(chip); /* program the position buffer */ azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr); @@ -953,12 +987,12 @@ static void azx_init_pci(struct azx *chip) case AZX_DRIVER_SCH: pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop); if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) { - pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, \ + pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, snoop & (~INTEL_SCH_HDA_DEVC_NOSNOOP)); pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop); - snd_printdd("HDA snoop disabled, enabling ... %s\n",\ - (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) \ + snd_printdd(SFX "HDA snoop disabled, enabling ... %s\n", + (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) ? "Failed" : "OK"); } break; @@ -1012,7 +1046,7 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id) /* clear rirb int */ status = azx_readb(chip, RIRBSTS); if (status & RIRB_INT_MASK) { - if (!chip->single_cmd && (status & RIRB_INT_RESPONSE)) + if (status & RIRB_INT_RESPONSE) azx_update_rirb(chip); azx_writeb(chip, RIRBSTS, RIRB_INT_MASK); } @@ -1098,7 +1132,7 @@ static int azx_setup_periods(struct azx *chip, pos_align; pos_adj = frames_to_bytes(runtime, pos_adj); if (pos_adj >= period_bytes) { - snd_printk(KERN_WARNING "Too big adjustment %d\n", + snd_printk(KERN_WARNING SFX "Too big adjustment %d\n", bdl_pos_adj[chip->dev_index]); pos_adj = 0; } else { @@ -1122,7 +1156,7 @@ static int azx_setup_periods(struct azx *chip, return 0; error: - snd_printk(KERN_ERR "Too many BDL entries: buffer=%d, period=%d\n", + snd_printk(KERN_ERR SFX "Too many BDL entries: buffer=%d, period=%d\n", azx_dev->bufsize, period_bytes); return -EINVAL; } @@ -1215,7 +1249,7 @@ static int probe_codec(struct azx *chip, int addr) chip->probing = 0; if (res == -1) return -EIO; - snd_printdd("hda_intel: codec #%d probed OK\n", addr); + snd_printdd(SFX "codec #%d probed OK\n", addr); return 0; } @@ -1223,6 +1257,26 @@ static int azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec, struct hda_pcm *cpcm); static void azx_stop_chip(struct azx *chip); +static void azx_bus_reset(struct hda_bus *bus) +{ + struct azx *chip = bus->private_data; + + bus->in_reset = 1; + azx_stop_chip(chip); + azx_init_chip(chip); +#ifdef CONFIG_PM + if (chip->initialized) { + int i; + + for (i = 0; i < AZX_MAX_PCMS; i++) + snd_pcm_suspend_all(chip->pcm[i]); + snd_hda_suspend(chip->bus); + snd_hda_resume(chip->bus); + } +#endif + bus->in_reset = 0; +} + /* * Codec initialization */ @@ -1246,6 +1300,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model, bus_temp.ops.command = azx_send_cmd; bus_temp.ops.get_response = azx_get_response; bus_temp.ops.attach_pcm = azx_attach_pcm_stream; + bus_temp.ops.bus_reset = azx_bus_reset; #ifdef CONFIG_SND_HDA_POWER_SAVE bus_temp.power_save = &power_save; bus_temp.ops.pm_notify = azx_power_notify; @@ -1270,8 +1325,8 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model, /* Some BIOSen give you wrong codec addresses * that don't exist */ - snd_printk(KERN_WARNING - "hda_intel: Codec #%d probe error; " + snd_printk(KERN_WARNING SFX + "Codec #%d probe error; " "disabling it...\n", c); chip->codec_mask &= ~(1 << c); /* More badly, accessing to a non-existing @@ -1487,7 +1542,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream) bufsize = snd_pcm_lib_buffer_bytes(substream); period_bytes = snd_pcm_lib_period_bytes(substream); - snd_printdd("azx_pcm_prepare: bufsize=0x%x, format=0x%x\n", + snd_printdd(SFX "azx_pcm_prepare: bufsize=0x%x, format=0x%x\n", bufsize, format_val); if (bufsize != azx_dev->bufsize || @@ -1830,7 +1885,7 @@ azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec, &pcm); if (err < 0) return err; - strcpy(pcm->name, cpcm->name); + strlcpy(pcm->name, cpcm->name, sizeof(pcm->name)); apcm = kzalloc(sizeof(*apcm), GFP_KERNEL); if (apcm == NULL) return -ENOMEM; @@ -1973,7 +2028,7 @@ static int azx_suspend(struct pci_dev *pci, pm_message_t state) for (i = 0; i < AZX_MAX_PCMS; i++) snd_pcm_suspend_all(chip->pcm[i]); if (chip->initialized) - snd_hda_suspend(chip->bus, state); + snd_hda_suspend(chip->bus); azx_stop_chip(chip); if (chip->irq >= 0) { free_irq(chip->irq, chip); @@ -2265,14 +2320,14 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, synchronize_irq(chip->irq); gcap = azx_readw(chip, GCAP); - snd_printdd("chipset global capabilities = 0x%x\n", gcap); + snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap); /* ATI chips seems buggy about 64bit DMA addresses */ if (chip->driver_type == AZX_DRIVER_ATI) - gcap &= ~0x01; + gcap &= ~ICH6_GCAP_64OK; /* allow 64bit DMA address if supported by H/W */ - if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64))) + if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64))) pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64)); else { pci_set_dma_mask(pci, DMA_BIT_MASK(32)); @@ -2309,7 +2364,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev), GFP_KERNEL); if (!chip->azx_dev) { - snd_printk(KERN_ERR "cannot malloc azx_dev\n"); + snd_printk(KERN_ERR SFX "cannot malloc azx_dev\n"); goto errout; } @@ -2332,11 +2387,9 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, goto errout; } /* allocate CORB/RIRB */ - if (!chip->single_cmd) { - err = azx_alloc_cmd_io(chip); - if (err < 0) - goto errout; - } + err = azx_alloc_cmd_io(chip); + if (err < 0) + goto errout; /* initialize streams */ azx_init_stream(chip); @@ -2359,9 +2412,11 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, } strcpy(card->driver, "HDA-Intel"); - strcpy(card->shortname, driver_short_names[chip->driver_type]); - sprintf(card->longname, "%s at 0x%lx irq %i", - card->shortname, chip->addr, chip->irq); + strlcpy(card->shortname, driver_short_names[chip->driver_type], + sizeof(card->shortname)); + snprintf(card->longname, sizeof(card->longname), + "%s at 0x%lx irq %i", + card->shortname, chip->addr, chip->irq); *rchip = chip; return 0; @@ -2514,6 +2569,20 @@ static struct pci_device_id azx_ids[] = { { PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA }, /* Teradici */ { PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA }, + /* Creative X-Fi (CA0110-IBG) */ +#if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE) + /* the following entry conflicts with snd-ctxfi driver, + * as ctxfi driver mutates from HD-audio to native mode with + * a special command sequence. + */ + { PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_ANY_ID), + .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, + .class_mask = 0xffffff, + .driver_data = AZX_DRIVER_GENERIC }, +#else + /* this entry seems still valid -- i.e. without emu20kx chip */ + { PCI_DEVICE(0x1102, 0x0009), .driver_data = AZX_DRIVER_GENERIC }, +#endif /* AMD Generic, PCI class code and Vendor ID for HD Audio */ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID), .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index 93d7499..418c5d1 100644 --- a/sound/pci/hda/hda_proc.c +++ b/sound/pci/hda/hda_proc.c @@ -466,8 +466,12 @@ static void print_codec_info(struct snd_info_entry *entry, hda_nid_t nid; int i, nodes; - snd_iprintf(buffer, "Codec: %s\n", - codec->name ? codec->name : "Not Set"); + snd_iprintf(buffer, "Codec: "); + if (codec->vendor_name && codec->chip_name) + snd_iprintf(buffer, "%s %s\n", + codec->vendor_name, codec->chip_name); + else + snd_iprintf(buffer, "Not Set\n"); snd_iprintf(buffer, "Address: %d\n", codec->addr); snd_iprintf(buffer, "Function Id: 0x%x\n", codec->function_id); snd_iprintf(buffer, "Vendor Id: 0x%08x\n", codec->vendor_id); diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c new file mode 100644 index 0000000..392d108 --- /dev/null +++ b/sound/pci/hda/patch_ca0110.c @@ -0,0 +1,573 @@ +/* + * HD audio interface patch for Creative X-Fi CA0110-IBG chip + * + * Copyright (c) 2008 Takashi Iwai + * + * This driver is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include "hda_codec.h" +#include "hda_local.h" + +/* + */ + +struct ca0110_spec { + struct auto_pin_cfg autocfg; + struct hda_multi_out multiout; + hda_nid_t out_pins[AUTO_CFG_MAX_OUTS]; + hda_nid_t dacs[AUTO_CFG_MAX_OUTS]; + hda_nid_t hp_dac; + hda_nid_t input_pins[AUTO_PIN_LAST]; + hda_nid_t adcs[AUTO_PIN_LAST]; + hda_nid_t dig_out; + hda_nid_t dig_in; + unsigned int num_inputs; + const char *input_labels[AUTO_PIN_LAST]; + struct hda_pcm pcm_rec[2]; /* PCM information */ +}; + +/* + * PCM callbacks + */ +static int ca0110_playback_pcm_open(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct ca0110_spec *spec = codec->spec; + return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream, + hinfo); +} + +static int ca0110_playback_pcm_prepare(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + unsigned int stream_tag, + unsigned int format, + struct snd_pcm_substream *substream) +{ + struct ca0110_spec *spec = codec->spec; + return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, + stream_tag, format, substream); +} + +static int ca0110_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct ca0110_spec *spec = codec->spec; + return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout); +} + +/* + * Digital out + */ +static int ca0110_dig_playback_pcm_open(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct ca0110_spec *spec = codec->spec; + return snd_hda_multi_out_dig_open(codec, &spec->multiout); +} + +static int ca0110_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct ca0110_spec *spec = codec->spec; + return snd_hda_multi_out_dig_close(codec, &spec->multiout); +} + +static int ca0110_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + unsigned int stream_tag, + unsigned int format, + struct snd_pcm_substream *substream) +{ + struct ca0110_spec *spec = codec->spec; + return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag, + format, substream); +} + +/* + * Analog capture + */ +static int ca0110_capture_pcm_prepare(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + unsigned int stream_tag, + unsigned int format, + struct snd_pcm_substream *substream) +{ + struct ca0110_spec *spec = codec->spec; + + snd_hda_codec_setup_stream(codec, spec->adcs[substream->number], + stream_tag, 0, format); + return 0; +} + +static int ca0110_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct ca0110_spec *spec = codec->spec; + + snd_hda_codec_cleanup_stream(codec, spec->adcs[substream->number]); + return 0; +} + +/* + */ + +static char *dirstr[2] = { "Playback", "Capture" }; + +static int _add_switch(struct hda_codec *codec, hda_nid_t nid, const char *pfx, + int chan, int dir) +{ + char namestr[44]; + int type = dir ? HDA_INPUT : HDA_OUTPUT; + struct snd_kcontrol_new knew = + HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type); + sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]); + return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec)); +} + +static int _add_volume(struct hda_codec *codec, hda_nid_t nid, const char *pfx, + int chan, int dir) +{ + char namestr[44]; + int type = dir ? HDA_INPUT : HDA_OUTPUT; + struct snd_kcontrol_new knew = + HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type); + sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]); + return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec)); +} + +#define add_out_switch(codec, nid, pfx) _add_switch(codec, nid, pfx, 3, 0) +#define add_out_volume(codec, nid, pfx) _add_volume(codec, nid, pfx, 3, 0) +#define add_in_switch(codec, nid, pfx) _add_switch(codec, nid, pfx, 3, 1) +#define add_in_volume(codec, nid, pfx) _add_volume(codec, nid, pfx, 3, 1) +#define add_mono_switch(codec, nid, pfx, chan) \ + _add_switch(codec, nid, pfx, chan, 0) +#define add_mono_volume(codec, nid, pfx, chan) \ + _add_volume(codec, nid, pfx, chan, 0) + +static int ca0110_build_controls(struct hda_codec *codec) +{ + struct ca0110_spec *spec = codec->spec; + struct auto_pin_cfg *cfg = &spec->autocfg; + static char *prefix[AUTO_CFG_MAX_OUTS] = { + "Front", "Surround", NULL, "Side", "Multi" + }; + hda_nid_t mutenid; + int i, err; + + for (i = 0; i < spec->multiout.num_dacs; i++) { + if (get_wcaps(codec, spec->out_pins[i]) & AC_WCAP_OUT_AMP) + mutenid = spec->out_pins[i]; + else + mutenid = spec->multiout.dac_nids[i]; + if (!prefix[i]) { + err = add_mono_switch(codec, mutenid, + "Center", 1); + if (err < 0) + return err; + err = add_mono_switch(codec, mutenid, + "LFE", 1); + if (err < 0) + return err; + err = add_mono_volume(codec, spec->multiout.dac_nids[i], + "Center", 1); + if (err < 0) + return err; + err = add_mono_volume(codec, spec->multiout.dac_nids[i], + "LFE", 1); + if (err < 0) + return err; + } else { + err = add_out_switch(codec, mutenid, + prefix[i]); + if (err < 0) + return err; + err = add_out_volume(codec, spec->multiout.dac_nids[i], + prefix[i]); + if (err < 0) + return err; + } + } + if (cfg->hp_outs) { + if (get_wcaps(codec, cfg->hp_pins[0]) & AC_WCAP_OUT_AMP) + mutenid = cfg->hp_pins[0]; + else + mutenid = spec->multiout.dac_nids[i]; + + err = add_out_switch(codec, mutenid, "Headphone"); + if (err < 0) + return err; + if (spec->hp_dac) { + err = add_out_volume(codec, spec->hp_dac, "Headphone"); + if (err < 0) + return err; + } + } + for (i = 0; i < spec->num_inputs; i++) { + const char *label = spec->input_labels[i]; + if (get_wcaps(codec, spec->input_pins[i]) & AC_WCAP_IN_AMP) + mutenid = spec->input_pins[i]; + else + mutenid = spec->adcs[i]; + err = add_in_switch(codec, mutenid, label); + if (err < 0) + return err; + err = add_in_volume(codec, spec->adcs[i], label); + if (err < 0) + return err; + } + + if (spec->dig_out) { + err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out); + if (err < 0) + return err; + err = snd_hda_create_spdif_share_sw(codec, &spec->multiout); + if (err < 0) + return err; + spec->multiout.share_spdif = 1; + } + if (spec->dig_in) { + err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); + if (err < 0) + return err; + err = add_in_volume(codec, spec->dig_in, "IEC958"); + } + return 0; +} + +/* + */ +static struct hda_pcm_stream ca0110_pcm_analog_playback = { + .substreams = 1, + .channels_min = 2, + .channels_max = 8, + .ops = { + .open = ca0110_playback_pcm_open, + .prepare = ca0110_playback_pcm_prepare, + .cleanup = ca0110_playback_pcm_cleanup + }, +}; + +static struct hda_pcm_stream ca0110_pcm_analog_capture = { + .substreams = 1, + .channels_min = 2, + .channels_max = 2, + .ops = { + .prepare = ca0110_capture_pcm_prepare, + .cleanup = ca0110_capture_pcm_cleanup + }, +}; + +static struct hda_pcm_stream ca0110_pcm_digital_playback = { + .substreams = 1, + .channels_min = 2, + .channels_max = 2, + .ops = { + .open = ca0110_dig_playback_pcm_open, + .close = ca0110_dig_playback_pcm_close, + .prepare = ca0110_dig_playback_pcm_prepare + }, +}; + +static struct hda_pcm_stream ca0110_pcm_digital_capture = { + .substreams = 1, + .channels_min = 2, + .channels_max = 2, +}; + +static int ca0110_build_pcms(struct hda_codec *codec) +{ + struct ca0110_spec *spec = codec->spec; + struct hda_pcm *info = spec->pcm_rec; + + codec->pcm_info = info; + codec->num_pcms = 0; + + info->name = "CA0110 Analog"; + info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ca0110_pcm_analog_playback; + info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dacs[0]; + info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = + spec->multiout.max_channels; + info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0110_pcm_analog_capture; + info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = spec->num_inputs; + info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0]; + codec->num_pcms++; + + if (!spec->dig_out && !spec->dig_in) + return 0; + + info++; + info->name = "CA0110 Digital"; + info->pcm_type = HDA_PCM_TYPE_SPDIF; + if (spec->dig_out) { + info->stream[SNDRV_PCM_STREAM_PLAYBACK] = + ca0110_pcm_digital_playback; + info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out; + } + if (spec->dig_in) { + info->stream[SNDRV_PCM_STREAM_CAPTURE] = + ca0110_pcm_digital_capture; + info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in; + } + codec->num_pcms++; + + return 0; +} + +static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac) +{ + if (pin) { + snd_hda_codec_write(codec, pin, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP); + if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP) + snd_hda_codec_write(codec, pin, 0, + AC_VERB_SET_AMP_GAIN_MUTE, + AMP_OUT_UNMUTE); + } + if (dac) + snd_hda_codec_write(codec, dac, 0, + AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO); +} + +static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc) +{ + if (pin) { + snd_hda_codec_write(codec, pin, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80); + if (get_wcaps(codec, pin) & AC_WCAP_IN_AMP) + snd_hda_codec_write(codec, pin, 0, + AC_VERB_SET_AMP_GAIN_MUTE, + AMP_IN_UNMUTE(0)); + } + if (adc) + snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE, + AMP_IN_UNMUTE(0)); +} + +static int ca0110_init(struct hda_codec *codec) +{ + struct ca0110_spec *spec = codec->spec; + struct auto_pin_cfg *cfg = &spec->autocfg; + int i; + + for (i = 0; i < spec->multiout.num_dacs; i++) + init_output(codec, spec->out_pins[i], + spec->multiout.dac_nids[i]); + init_output(codec, cfg->hp_pins[0], spec->hp_dac); + init_output(codec, cfg->dig_out_pins[0], spec->dig_out); + + for (i = 0; i < spec->num_inputs; i++) + init_input(codec, spec->input_pins[i], spec->adcs[i]); + init_input(codec, cfg->dig_in_pin, spec->dig_in); + return 0; +} + +static void ca0110_free(struct hda_codec *codec) +{ + kfree(codec->spec); +} + +static struct hda_codec_ops ca0110_patch_ops = { + .build_controls = ca0110_build_controls, + .build_pcms = ca0110_build_pcms, + .init = ca0110_init, + .free = ca0110_free, +}; + + +static void parse_line_outs(struct hda_codec *codec) +{ + struct ca0110_spec *spec = codec->spec; + struct auto_pin_cfg *cfg = &spec->autocfg; + int i, n; + unsigned int def_conf; + hda_nid_t nid; + + n = 0; + for (i = 0; i < cfg->line_outs; i++) { + nid = cfg->line_out_pins[i]; + def_conf = snd_hda_codec_get_pincfg(codec, nid); + if (!def_conf) + continue; /* invalid pin */ + if (snd_hda_get_connections(codec, nid, &spec->dacs[i], 1) != 1) + continue; + spec->out_pins[n++] = nid; + } + spec->multiout.dac_nids = spec->dacs; + spec->multiout.num_dacs = n; + spec->multiout.max_channels = n * 2; +} + +static void parse_hp_out(struct hda_codec *codec) +{ + struct ca0110_spec *spec = codec->spec; + struct auto_pin_cfg *cfg = &spec->autocfg; + int i; + unsigned int def_conf; + hda_nid_t nid, dac; + + if (!cfg->hp_outs) + return; + nid = cfg->hp_pins[0]; + def_conf = snd_hda_codec_get_pincfg(codec, nid); + if (!def_conf) { + cfg->hp_outs = 0; + return; + } + if (snd_hda_get_connections(codec, nid, &dac, 1) != 1) + return; + + for (i = 0; i < cfg->line_outs; i++) + if (dac == spec->dacs[i]) + break; + if (i >= cfg->line_outs) { + spec->hp_dac = dac; + spec->multiout.hp_nid = dac; + } +} + +static void parse_input(struct hda_codec *codec) +{ + struct ca0110_spec *spec = codec->spec; + struct auto_pin_cfg *cfg = &spec->autocfg; + hda_nid_t nid, pin; + int n, i, j; + + n = 0; + nid = codec->start_nid; + for (i = 0; i < codec->num_nodes; i++, nid++) { + unsigned int wcaps = get_wcaps(codec, nid); + unsigned int type = (wcaps & AC_WCAP_TYPE) >> + AC_WCAP_TYPE_SHIFT; + if (type != AC_WID_AUD_IN) + continue; + if (snd_hda_get_connections(codec, nid, &pin, 1) != 1) + continue; + if (pin == cfg->dig_in_pin) { + spec->dig_in = nid; + continue; + } + for (j = 0; j < AUTO_PIN_LAST; j++) + if (cfg->input_pins[j] == pin) + break; + if (j >= AUTO_PIN_LAST) + continue; + spec->input_pins[n] = pin; + spec->input_labels[n] = auto_pin_cfg_labels[j]; + spec->adcs[n] = nid; + n++; + } + spec->num_inputs = n; +} + +static void parse_digital(struct hda_codec *codec) +{ + struct ca0110_spec *spec = codec->spec; + struct auto_pin_cfg *cfg = &spec->autocfg; + + if (cfg->dig_outs && + snd_hda_get_connections(codec, cfg->dig_out_pins[0], + &spec->dig_out, 1) == 1) + spec->multiout.dig_out_nid = cfg->dig_out_pins[0]; +} + +static int ca0110_parse_auto_config(struct hda_codec *codec) +{ + struct ca0110_spec *spec = codec->spec; + int err; + + err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL); + if (err < 0) + return err; + + parse_line_outs(codec); + parse_hp_out(codec); + parse_digital(codec); + parse_input(codec); + return 0; +} + + +int patch_ca0110(struct hda_codec *codec) +{ + struct ca0110_spec *spec; + int err; + + spec = kzalloc(sizeof(*spec), GFP_KERNEL); + if (!spec) + return -ENOMEM; + codec->spec = spec; + + codec->bus->needs_damn_long_delay = 1; + + err = ca0110_parse_auto_config(codec); + if (err < 0) + goto error; + + codec->patch_ops = ca0110_patch_ops; + + return 0; + + error: + kfree(codec->spec); + codec->spec = NULL; + return err; +} + + +/* + * patch entries + */ +static struct hda_codec_preset snd_hda_preset_ca0110[] = { + { .id = 0x1102000a, .name = "CA0110-IBG", .patch = patch_ca0110 }, + { .id = 0x1102000b, .name = "CA0110-IBG", .patch = patch_ca0110 }, + { .id = 0x1102000d, .name = "SB0880 X-Fi", .patch = patch_ca0110 }, + {} /* terminator */ +}; + +MODULE_ALIAS("snd-hda-codec-id:1102000a"); +MODULE_ALIAS("snd-hda-codec-id:1102000b"); +MODULE_ALIAS("snd-hda-codec-id:1102000d"); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Creative CA0110-IBG HD-audio codec"); + +static struct hda_codec_preset_list ca0110_list = { + .preset = snd_hda_preset_ca0110, + .owner = THIS_MODULE, +}; + +static int __init patch_ca0110_init(void) +{ + return snd_hda_add_codec_preset(&ca0110_list); +} + +static void __exit patch_ca0110_exit(void) +{ + snd_hda_delete_codec_preset(&ca0110_list); +} + +module_init(patch_ca0110_init) +module_exit(patch_ca0110_exit) diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c index d57d813..f5792e2 100644 --- a/sound/pci/hda/patch_nvhdmi.c +++ b/sound/pci/hda/patch_nvhdmi.c @@ -35,9 +35,28 @@ struct nvhdmi_spec { struct hda_pcm pcm_rec; }; +#define Nv_VERB_SET_Channel_Allocation 0xF79 +#define Nv_VERB_SET_Info_Frame_Checksum 0xF7A +#define Nv_VERB_SET_Audio_Protection_On 0xF98 +#define Nv_VERB_SET_Audio_Protection_Off 0xF99 + +#define Nv_Master_Convert_nid 0x04 +#define Nv_Master_Pin_nid 0x05 + +static hda_nid_t nvhdmi_convert_nids[4] = { + /*front, rear, clfe, rear_surr */ + 0x6, 0x8, 0xa, 0xc, +}; + static struct hda_verb nvhdmi_basic_init[] = { + /* set audio protect on */ + { 0x1, Nv_VERB_SET_Audio_Protection_On, 0x1}, /* enable digital output on pin widget */ - { 0x05, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x5, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 }, + { 0x7, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 }, + { 0x9, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 }, + { 0xb, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 }, + { 0xd, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 }, {} /* terminator */ }; @@ -66,48 +85,205 @@ static int nvhdmi_init(struct hda_codec *codec) * Digital out */ static int nvhdmi_dig_playback_pcm_open(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - struct snd_pcm_substream *substream) + struct hda_codec *codec, + struct snd_pcm_substream *substream) { struct nvhdmi_spec *spec = codec->spec; return snd_hda_multi_out_dig_open(codec, &spec->multiout); } -static int nvhdmi_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - struct snd_pcm_substream *substream) +static int nvhdmi_dig_playback_pcm_close_8ch(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) { struct nvhdmi_spec *spec = codec->spec; + int i; + + snd_hda_codec_write(codec, Nv_Master_Convert_nid, + 0, AC_VERB_SET_CHANNEL_STREAMID, 0); + for (i = 0; i < 4; i++) { + /* set the stream id */ + snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0, + AC_VERB_SET_CHANNEL_STREAMID, 0); + /* set the stream format */ + snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0, + AC_VERB_SET_STREAM_FORMAT, 0); + } + return snd_hda_multi_out_dig_close(codec, &spec->multiout); } -static int nvhdmi_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - unsigned int stream_tag, - unsigned int format, - struct snd_pcm_substream *substream) +static int nvhdmi_dig_playback_pcm_close_2ch(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct nvhdmi_spec *spec = codec->spec; + return snd_hda_multi_out_dig_close(codec, &spec->multiout); +} + +static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + unsigned int stream_tag, + unsigned int format, + struct snd_pcm_substream *substream) +{ + int chs; + unsigned int dataDCC1, dataDCC2, chan, chanmask, channel_id; + int i; + + mutex_lock(&codec->spdif_mutex); + + chs = substream->runtime->channels; + chan = chs ? (chs - 1) : 1; + + switch (chs) { + default: + case 0: + case 2: + chanmask = 0x00; + break; + case 4: + chanmask = 0x08; + break; + case 6: + chanmask = 0x0b; + break; + case 8: + chanmask = 0x13; + break; + } + dataDCC1 = AC_DIG1_ENABLE | AC_DIG1_COPYRIGHT; + dataDCC2 = 0x2; + + /* set the Audio InforFrame Channel Allocation */ + snd_hda_codec_write(codec, 0x1, 0, + Nv_VERB_SET_Channel_Allocation, chanmask); + + /* turn off SPDIF once; otherwise the IEC958 bits won't be updated */ + if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) + snd_hda_codec_write(codec, + Nv_Master_Convert_nid, + 0, + AC_VERB_SET_DIGI_CONVERT_1, + codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff); + + /* set the stream id */ + snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0, + AC_VERB_SET_CHANNEL_STREAMID, (stream_tag << 4) | 0x0); + + /* set the stream format */ + snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0, + AC_VERB_SET_STREAM_FORMAT, format); + + /* turn on again (if needed) */ + /* enable and set the channel status audio/data flag */ + if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) { + snd_hda_codec_write(codec, + Nv_Master_Convert_nid, + 0, + AC_VERB_SET_DIGI_CONVERT_1, + codec->spdif_ctls & 0xff); + snd_hda_codec_write(codec, + Nv_Master_Convert_nid, + 0, + AC_VERB_SET_DIGI_CONVERT_2, dataDCC2); + } + + for (i = 0; i < 4; i++) { + if (chs == 2) + channel_id = 0; + else + channel_id = i * 2; + + /* turn off SPDIF once; + *otherwise the IEC958 bits won't be updated + */ + if (codec->spdif_status_reset && + (codec->spdif_ctls & AC_DIG1_ENABLE)) + snd_hda_codec_write(codec, + nvhdmi_convert_nids[i], + 0, + AC_VERB_SET_DIGI_CONVERT_1, + codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff); + /* set the stream id */ + snd_hda_codec_write(codec, + nvhdmi_convert_nids[i], + 0, + AC_VERB_SET_CHANNEL_STREAMID, + (stream_tag << 4) | channel_id); + /* set the stream format */ + snd_hda_codec_write(codec, + nvhdmi_convert_nids[i], + 0, + AC_VERB_SET_STREAM_FORMAT, + format); + /* turn on again (if needed) */ + /* enable and set the channel status audio/data flag */ + if (codec->spdif_status_reset && + (codec->spdif_ctls & AC_DIG1_ENABLE)) { + snd_hda_codec_write(codec, + nvhdmi_convert_nids[i], + 0, + AC_VERB_SET_DIGI_CONVERT_1, + codec->spdif_ctls & 0xff); + snd_hda_codec_write(codec, + nvhdmi_convert_nids[i], + 0, + AC_VERB_SET_DIGI_CONVERT_2, dataDCC2); + } + } + + /* set the Audio Info Frame Checksum */ + snd_hda_codec_write(codec, 0x1, 0, + Nv_VERB_SET_Info_Frame_Checksum, + (0x71 - chan - chanmask)); + + mutex_unlock(&codec->spdif_mutex); + return 0; +} + +static int nvhdmi_dig_playback_pcm_prepare_2ch(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + unsigned int stream_tag, + unsigned int format, + struct snd_pcm_substream *substream) { struct nvhdmi_spec *spec = codec->spec; return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag, - format, substream); + format, substream); } -static struct hda_pcm_stream nvhdmi_pcm_digital_playback = { +static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = { + .substreams = 1, + .channels_min = 2, + .channels_max = 8, + .nid = Nv_Master_Convert_nid, + .rates = SNDRV_PCM_RATE_48000, + .maxbps = 16, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .ops = { + .open = nvhdmi_dig_playback_pcm_open, + .close = nvhdmi_dig_playback_pcm_close_8ch, + .prepare = nvhdmi_dig_playback_pcm_prepare_8ch + }, +}; + +static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = { .substreams = 1, .channels_min = 2, .channels_max = 2, - .nid = 0x4, /* NID to query formats and rates and setup streams */ + .nid = Nv_Master_Convert_nid, .rates = SNDRV_PCM_RATE_48000, .maxbps = 16, .formats = SNDRV_PCM_FMTBIT_S16_LE, .ops = { .open = nvhdmi_dig_playback_pcm_open, - .close = nvhdmi_dig_playback_pcm_close, - .prepare = nvhdmi_dig_playback_pcm_prepare + .close = nvhdmi_dig_playback_pcm_close_2ch, + .prepare = nvhdmi_dig_playback_pcm_prepare_2ch }, }; -static int nvhdmi_build_pcms(struct hda_codec *codec) +static int nvhdmi_build_pcms_8ch(struct hda_codec *codec) { struct nvhdmi_spec *spec = codec->spec; struct hda_pcm *info = &spec->pcm_rec; @@ -117,7 +293,24 @@ static int nvhdmi_build_pcms(struct hda_codec *codec) info->name = "NVIDIA HDMI"; info->pcm_type = HDA_PCM_TYPE_HDMI; - info->stream[SNDRV_PCM_STREAM_PLAYBACK] = nvhdmi_pcm_digital_playback; + info->stream[SNDRV_PCM_STREAM_PLAYBACK] + = nvhdmi_pcm_digital_playback_8ch; + + return 0; +} + +static int nvhdmi_build_pcms_2ch(struct hda_codec *codec) +{ + struct nvhdmi_spec *spec = codec->spec; + struct hda_pcm *info = &spec->pcm_rec; + + codec->num_pcms = 1; + codec->pcm_info = info; + + info->name = "NVIDIA HDMI"; + info->pcm_type = HDA_PCM_TYPE_HDMI; + info->stream[SNDRV_PCM_STREAM_PLAYBACK] + = nvhdmi_pcm_digital_playback_2ch; return 0; } @@ -127,14 +320,40 @@ static void nvhdmi_free(struct hda_codec *codec) kfree(codec->spec); } -static struct hda_codec_ops nvhdmi_patch_ops = { +static struct hda_codec_ops nvhdmi_patch_ops_8ch = { + .build_controls = nvhdmi_build_controls, + .build_pcms = nvhdmi_build_pcms_8ch, + .init = nvhdmi_init, + .free = nvhdmi_free, +}; + +static struct hda_codec_ops nvhdmi_patch_ops_2ch = { .build_controls = nvhdmi_build_controls, - .build_pcms = nvhdmi_build_pcms, + .build_pcms = nvhdmi_build_pcms_2ch, .init = nvhdmi_init, .free = nvhdmi_free, }; -static int patch_nvhdmi(struct hda_codec *codec) +static int patch_nvhdmi_8ch(struct hda_codec *codec) +{ + struct nvhdmi_spec *spec; + + spec = kzalloc(sizeof(*spec), GFP_KERNEL); + if (spec == NULL) + return -ENOMEM; + + codec->spec = spec; + + spec->multiout.num_dacs = 0; /* no analog */ + spec->multiout.max_channels = 8; + spec->multiout.dig_out_nid = Nv_Master_Convert_nid; + + codec->patch_ops = nvhdmi_patch_ops_8ch; + + return 0; +} + +static int patch_nvhdmi_2ch(struct hda_codec *codec) { struct nvhdmi_spec *spec; @@ -144,13 +363,11 @@ static int patch_nvhdmi(struct hda_codec *codec) codec->spec = spec; - spec->multiout.num_dacs = 0; /* no analog */ + spec->multiout.num_dacs = 0; /* no analog */ spec->multiout.max_channels = 2; - spec->multiout.dig_out_nid = 0x4; /* NID for copying analog to digital, - * seems to be unused in pure-digital - * case. */ + spec->multiout.dig_out_nid = Nv_Master_Convert_nid; - codec->patch_ops = nvhdmi_patch_ops; + codec->patch_ops = nvhdmi_patch_ops_2ch; return 0; } @@ -159,11 +376,11 @@ static int patch_nvhdmi(struct hda_codec *codec) * patch entries */ static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { - { .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi }, - { .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi }, - { .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi }, - { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi }, - { .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi }, + { .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, + { .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, + { .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch }, + { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch }, + { .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch }, {} /* terminator */ }; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0fd258e..337d2a5 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -190,6 +190,7 @@ enum { ALC663_ASUS_MODE6, ALC272_DELL, ALC272_DELL_ZM1, + ALC272_SAMSUNG_NC10, ALC662_AUTO, ALC662_MODEL_LAST, }; @@ -205,6 +206,7 @@ enum { ALC882_ASUS_A7M, ALC885_MACPRO, ALC885_MBP3, + ALC885_MB5, ALC885_IMAC24, ALC882_AUTO, ALC882_MODEL_LAST, @@ -218,9 +220,11 @@ enum { ALC883_6ST_DIG, ALC883_TARGA_DIG, ALC883_TARGA_2ch_DIG, + ALC883_TARGA_8ch_DIG, ALC883_ACER, ALC883_ACER_ASPIRE, ALC888_ACER_ASPIRE_4930G, + ALC888_ACER_ASPIRE_8930G, ALC883_MEDION, ALC883_MEDION_MD2, ALC883_LAPTOP_EAPD, @@ -238,7 +242,9 @@ enum { ALC883_3ST_6ch_INTEL, ALC888_ASUS_M90V, ALC888_ASUS_EEE1601, + ALC889A_MB31, ALC1200_ASUS_P5Q, + ALC883_SONY_VAIO_TT, ALC883_AUTO, ALC883_MODEL_LAST, }; @@ -253,6 +259,15 @@ enum { /* for GPIO Poll */ #define GPIO_MASK 0x03 +/* extra amp-initialization sequence types */ +enum { + ALC_INIT_NONE, + ALC_INIT_DEFAULT, + ALC_INIT_GPIO1, + ALC_INIT_GPIO2, + ALC_INIT_GPIO3, +}; + struct alc_spec { /* codec parameterization */ struct snd_kcontrol_new *mixers[5]; /* mixer arrays */ @@ -266,13 +281,13 @@ struct alc_spec { */ unsigned int num_init_verbs; - char *stream_name_analog; /* analog PCM stream */ + char stream_name_analog[16]; /* analog PCM stream */ struct hda_pcm_stream *stream_analog_playback; struct hda_pcm_stream *stream_analog_capture; struct hda_pcm_stream *stream_analog_alt_playback; struct hda_pcm_stream *stream_analog_alt_capture; - char *stream_name_digital; /* digital PCM stream */ + char stream_name_digital[16]; /* digital PCM stream */ struct hda_pcm_stream *stream_digital_playback; struct hda_pcm_stream *stream_digital_capture; @@ -301,6 +316,8 @@ struct alc_spec { const struct hda_channel_mode *channel_mode; int num_channel_mode; int need_dac_fix; + int const_channel_count; + int ext_channel_count; /* PCM information */ struct hda_pcm pcm_rec[3]; /* used in alc_build_pcms() */ @@ -322,6 +339,7 @@ struct alc_spec { /* other flags */ unsigned int no_analog :1; /* digital I/O only */ + int init_amp; /* for virtual master */ hda_nid_t vmaster_nid; @@ -355,6 +373,7 @@ struct alc_config_preset { unsigned int num_channel_mode; const struct hda_channel_mode *channel_mode; int need_dac_fix; + int const_channel_count; unsigned int num_mux_defs; const struct hda_input_mux *input_mux; void (*unsol_event)(struct hda_codec *, unsigned int); @@ -449,7 +468,7 @@ static int alc_ch_mode_get(struct snd_kcontrol *kcontrol, struct alc_spec *spec = codec->spec; return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode, spec->num_channel_mode, - spec->multiout.max_channels); + spec->ext_channel_count); } static int alc_ch_mode_put(struct snd_kcontrol *kcontrol, @@ -459,9 +478,12 @@ static int alc_ch_mode_put(struct snd_kcontrol *kcontrol, struct alc_spec *spec = codec->spec; int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode, spec->num_channel_mode, - &spec->multiout.max_channels); - if (err >= 0 && spec->need_dac_fix) - spec->multiout.num_dacs = spec->multiout.max_channels / 2; + &spec->ext_channel_count); + if (err >= 0 && !spec->const_channel_count) { + spec->multiout.max_channels = spec->ext_channel_count; + if (spec->need_dac_fix) + spec->multiout.num_dacs = spec->multiout.max_channels / 2; + } return err; } @@ -841,8 +863,13 @@ static void setup_preset(struct alc_spec *spec, spec->channel_mode = preset->channel_mode; spec->num_channel_mode = preset->num_channel_mode; spec->need_dac_fix = preset->need_dac_fix; + spec->const_channel_count = preset->const_channel_count; - spec->multiout.max_channels = spec->channel_mode[0].channels; + if (preset->const_channel_count) + spec->multiout.max_channels = preset->const_channel_count; + else + spec->multiout.max_channels = spec->channel_mode[0].channels; + spec->ext_channel_count = spec->channel_mode[0].channels; spec->multiout.num_dacs = preset->num_dacs; spec->multiout.dac_nids = preset->dac_nids; @@ -921,20 +948,26 @@ static void alc_fix_pll_init(struct hda_codec *codec, hda_nid_t nid, alc_fix_pll(codec); } -static void alc_sku_automute(struct hda_codec *codec) +static void alc_automute_pin(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; unsigned int present; - unsigned int hp_nid = spec->autocfg.hp_pins[0]; - unsigned int sp_nid = spec->autocfg.speaker_pins[0]; + unsigned int nid = spec->autocfg.hp_pins[0]; + int i; /* need to execute and sync at first */ - snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0); - present = snd_hda_codec_read(codec, hp_nid, 0, + snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); + present = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0); - spec->jack_present = (present & 0x80000000) != 0; - snd_hda_codec_write(codec, sp_nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - spec->jack_present ? 0 : PIN_OUT); + spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0; + for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) { + nid = spec->autocfg.speaker_pins[i]; + if (!nid) + break; + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, + spec->jack_present ? 0 : PIN_OUT); + } } #if 0 /* it's broken in some acses -- temporarily disabled */ @@ -969,16 +1002,19 @@ static void alc_sku_unsol_event(struct hda_codec *codec, unsigned int res) res >>= 28; else res >>= 26; - if (res == ALC880_HP_EVENT) - alc_sku_automute(codec); - - if (res == ALC880_MIC_EVENT) + switch (res) { + case ALC880_HP_EVENT: + alc_automute_pin(codec); + break; + case ALC880_MIC_EVENT: alc_mic_automute(codec); + break; + } } static void alc_inithook(struct hda_codec *codec) { - alc_sku_automute(codec); + alc_automute_pin(codec); alc_mic_automute(codec); } @@ -1000,69 +1036,21 @@ static void alc888_coef_init(struct hda_codec *codec) AC_VERB_SET_PROC_COEF, 0x3030); } -/* 32-bit subsystem ID for BIOS loading in HD Audio codec. - * 31 ~ 16 : Manufacture ID - * 15 ~ 8 : SKU ID - * 7 ~ 0 : Assembly ID - * port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36 - */ -static void alc_subsystem_id(struct hda_codec *codec, - unsigned int porta, unsigned int porte, - unsigned int portd) +static void alc_auto_init_amp(struct hda_codec *codec, int type) { - unsigned int ass, tmp, i; - unsigned nid; - struct alc_spec *spec = codec->spec; - - ass = codec->subsystem_id & 0xffff; - if ((ass != codec->bus->pci->subsystem_device) && (ass & 1)) - goto do_sku; - - /* - * 31~30 : port conetcivity - * 29~21 : reserve - * 20 : PCBEEP input - * 19~16 : Check sum (15:1) - * 15~1 : Custom - * 0 : override - */ - nid = 0x1d; - if (codec->vendor_id == 0x10ec0260) - nid = 0x17; - ass = snd_hda_codec_get_pincfg(codec, nid); - if (!(ass & 1) && !(ass & 0x100000)) - return; - if ((ass >> 30) != 1) /* no physical connection */ - return; + unsigned int tmp; - /* check sum */ - tmp = 0; - for (i = 1; i < 16; i++) { - if ((ass >> i) & 1) - tmp++; - } - if (((ass >> 16) & 0xf) != tmp) - return; -do_sku: - /* - * 0 : override - * 1 : Swap Jack - * 2 : 0 --> Desktop, 1 --> Laptop - * 3~5 : External Amplifier control - * 7~6 : Reserved - */ - tmp = (ass & 0x38) >> 3; /* external Amp control */ - switch (tmp) { - case 1: + switch (type) { + case ALC_INIT_GPIO1: snd_hda_sequence_write(codec, alc_gpio1_init_verbs); break; - case 3: + case ALC_INIT_GPIO2: snd_hda_sequence_write(codec, alc_gpio2_init_verbs); break; - case 7: + case ALC_INIT_GPIO3: snd_hda_sequence_write(codec, alc_gpio3_init_verbs); break; - case 5: /* set EAPD output high */ + case ALC_INIT_DEFAULT: switch (codec->vendor_id) { case 0x10ec0260: snd_hda_codec_write(codec, 0x0f, 0, @@ -1116,7 +1104,7 @@ do_sku: tmp | 0x2010); break; case 0x10ec0888: - /*alc888_coef_init(codec);*/ /* called in alc_init() */ + alc888_coef_init(codec); break; case 0x10ec0267: case 0x10ec0268: @@ -1131,7 +1119,107 @@ do_sku: tmp | 0x3000); break; } - default: + break; + } +} + +static void alc_init_auto_hp(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + if (!spec->autocfg.hp_pins[0]) + return; + + if (!spec->autocfg.speaker_pins[0]) { + if (spec->autocfg.line_out_pins[0] && + spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT) + spec->autocfg.speaker_pins[0] = + spec->autocfg.line_out_pins[0]; + else + return; + } + + snd_printdd("realtek: Enable HP auto-muting on NID 0x%x\n", + spec->autocfg.hp_pins[0]); + snd_hda_codec_write_cache(codec, spec->autocfg.hp_pins[0], 0, + AC_VERB_SET_UNSOLICITED_ENABLE, + AC_USRSP_EN | ALC880_HP_EVENT); + spec->unsol_event = alc_sku_unsol_event; +} + +/* check subsystem ID and set up device-specific initialization; + * return 1 if initialized, 0 if invalid SSID + */ +/* 32-bit subsystem ID for BIOS loading in HD Audio codec. + * 31 ~ 16 : Manufacture ID + * 15 ~ 8 : SKU ID + * 7 ~ 0 : Assembly ID + * port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36 + */ +static int alc_subsystem_id(struct hda_codec *codec, + hda_nid_t porta, hda_nid_t porte, + hda_nid_t portd) +{ + unsigned int ass, tmp, i; + unsigned nid; + struct alc_spec *spec = codec->spec; + + ass = codec->subsystem_id & 0xffff; + if ((ass != codec->bus->pci->subsystem_device) && (ass & 1)) + goto do_sku; + + /* invalid SSID, check the special NID pin defcfg instead */ + /* + * 31~30 : port conetcivity + * 29~21 : reserve + * 20 : PCBEEP input + * 19~16 : Check sum (15:1) + * 15~1 : Custom + * 0 : override + */ + nid = 0x1d; + if (codec->vendor_id == 0x10ec0260) + nid = 0x17; + ass = snd_hda_codec_get_pincfg(codec, nid); + snd_printd("realtek: No valid SSID, " + "checking pincfg 0x%08x for NID 0x%x\n", + ass, nid); + if (!(ass & 1) && !(ass & 0x100000)) + return 0; + if ((ass >> 30) != 1) /* no physical connection */ + return 0; + + /* check sum */ + tmp = 0; + for (i = 1; i < 16; i++) { + if ((ass >> i) & 1) + tmp++; + } + if (((ass >> 16) & 0xf) != tmp) + return 0; +do_sku: + snd_printd("realtek: Enabling init ASM_ID=0x%04x CODEC_ID=%08x\n", + ass & 0xffff, codec->vendor_id); + /* + * 0 : override + * 1 : Swap Jack + * 2 : 0 --> Desktop, 1 --> Laptop + * 3~5 : External Amplifier control + * 7~6 : Reserved + */ + tmp = (ass & 0x38) >> 3; /* external Amp control */ + switch (tmp) { + case 1: + spec->init_amp = ALC_INIT_GPIO1; + break; + case 3: + spec->init_amp = ALC_INIT_GPIO2; + break; + case 7: + spec->init_amp = ALC_INIT_GPIO3; + break; + case 5: + spec->init_amp = ALC_INIT_DEFAULT; break; } @@ -1139,7 +1227,7 @@ do_sku: * when the external headphone out jack is plugged" */ if (!(ass & 0x8000)) - return; + return 1; /* * 10~8 : Jack location * 12~11: Headphone out -> 00: PortA, 01: PortE, 02: PortD, 03: Resvered @@ -1147,14 +1235,6 @@ do_sku: * 15 : 1 --> enable the function "Mute internal speaker * when the external headphone out jack is plugged" */ - if (!spec->autocfg.speaker_pins[0]) { - if (spec->autocfg.line_out_pins[0]) - spec->autocfg.speaker_pins[0] = - spec->autocfg.line_out_pins[0]; - else - return; - } - if (!spec->autocfg.hp_pins[0]) { tmp = (ass >> 11) & 0x3; /* HP to chassis */ if (tmp == 0) @@ -1164,23 +1244,23 @@ do_sku: else if (tmp == 2) spec->autocfg.hp_pins[0] = portd; else - return; + return 1; } - if (spec->autocfg.hp_pins[0]) - snd_hda_codec_write(codec, spec->autocfg.hp_pins[0], 0, - AC_VERB_SET_UNSOLICITED_ENABLE, - AC_USRSP_EN | ALC880_HP_EVENT); -#if 0 /* it's broken in some acses -- temporarily disabled */ - if (spec->autocfg.input_pins[AUTO_PIN_MIC] && - spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC]) - snd_hda_codec_write(codec, - spec->autocfg.input_pins[AUTO_PIN_MIC], 0, - AC_VERB_SET_UNSOLICITED_ENABLE, - AC_USRSP_EN | ALC880_MIC_EVENT); -#endif /* disabled */ + alc_init_auto_hp(codec); + return 1; +} - spec->unsol_event = alc_sku_unsol_event; +static void alc_ssid_check(struct hda_codec *codec, + hda_nid_t porta, hda_nid_t porte, hda_nid_t portd) +{ + if (!alc_subsystem_id(codec, porta, porte, portd)) { + struct alc_spec *spec = codec->spec; + snd_printd("realtek: " + "Enable default setup for auto mode as fallback\n"); + spec->init_amp = ALC_INIT_DEFAULT; + alc_init_auto_hp(codec); + } } /* @@ -1315,32 +1395,58 @@ static struct hda_verb alc888_fujitsu_xa3530_verbs[] = { {} }; -static void alc888_fujitsu_xa3530_automute(struct hda_codec *codec) +static void alc_automute_amp(struct hda_codec *codec) { - unsigned int present; - unsigned int bits; - /* Line out presence */ - present = snd_hda_codec_read(codec, 0x17, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - /* HP out presence */ - present = present || snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; + struct alc_spec *spec = codec->spec; + unsigned int val, mute; + hda_nid_t nid; + int i; + + spec->jack_present = 0; + for (i = 0; i < ARRAY_SIZE(spec->autocfg.hp_pins); i++) { + nid = spec->autocfg.hp_pins[i]; + if (!nid) + break; + val = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_PIN_SENSE, 0); + if (val & AC_PINSENSE_PRESENCE) { + spec->jack_present = 1; + break; + } + } + + mute = spec->jack_present ? HDA_AMP_MUTE : 0; /* Toggle internal speakers muting */ - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); - /* Toggle internal bass muting */ - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); + for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) { + nid = spec->autocfg.speaker_pins[i]; + if (!nid) + break; + snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0, + HDA_AMP_MUTE, mute); + } } -static void alc888_fujitsu_xa3530_unsol_event(struct hda_codec *codec, - unsigned int res) +static void alc_automute_amp_unsol_event(struct hda_codec *codec, + unsigned int res) { - if (res >> 26 == ALC880_HP_EVENT) - alc888_fujitsu_xa3530_automute(codec); + if (codec->vendor_id == 0x10ec0880) + res >>= 28; + else + res >>= 26; + if (res == ALC880_HP_EVENT) + alc_automute_amp(codec); } +static void alc888_fujitsu_xa3530_init_hook(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x17; /* line-out */ + spec->autocfg.hp_pins[1] = 0x1b; /* hp */ + spec->autocfg.speaker_pins[0] = 0x14; /* speaker */ + spec->autocfg.speaker_pins[1] = 0x15; /* bass */ + alc_automute_amp(codec); +} /* * ALC888 Acer Aspire 4930G model @@ -1364,6 +1470,59 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = { { } }; +/* + * ALC889 Acer Aspire 8930G model + */ + +static struct hda_verb alc889_acer_aspire_8930g_verbs[] = { +/* Front Mic: set to PIN_IN (empty by default) */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, +/* Unselect Front Mic by default in input mixer 3 */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)}, +/* Enable unsolicited event for HP jack */ + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, +/* Connect Internal Front to Front */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Connect Internal Rear to Rear */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1b, AC_VERB_SET_CONNECT_SEL, 0x01}, +/* Connect Internal CLFE to CLFE */ + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x16, AC_VERB_SET_CONNECT_SEL, 0x02}, +/* Connect HP out to Front */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Enable all DACs */ +/* DAC DISABLE/MUTE 1? */ +/* setting bits 1-5 disables DAC nids 0x02-0x06 apparently. Init=0x38 */ + {0x20, AC_VERB_SET_COEF_INDEX, 0x03}, + {0x20, AC_VERB_SET_PROC_COEF, 0x0000}, +/* DAC DISABLE/MUTE 2? */ +/* some bit here disables the other DACs. Init=0x4900 */ + {0x20, AC_VERB_SET_COEF_INDEX, 0x08}, + {0x20, AC_VERB_SET_PROC_COEF, 0x0000}, +/* Enable amplifiers */ + {0x14, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, + {0x15, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, +/* DMIC fix + * This laptop has a stereo digital microphone. The mics are only 1cm apart + * which makes the stereo useless. However, either the mic or the ALC889 + * makes the signal become a difference/sum signal instead of standard + * stereo, which is annoying. So instead we flip this bit which makes the + * codec replicate the sum signal to both channels, turning it into a + * normal mono mic. + */ +/* DMIC_CONTROL? Init value = 0x0001 */ + {0x20, AC_VERB_SET_COEF_INDEX, 0x0b}, + {0x20, AC_VERB_SET_PROC_COEF, 0x0003}, + { } +}; + static struct hda_input_mux alc888_2_capture_sources[2] = { /* Front mic only available on one ADC */ { @@ -1385,6 +1544,38 @@ static struct hda_input_mux alc888_2_capture_sources[2] = { } }; +static struct hda_input_mux alc889_capture_sources[3] = { + /* Digital mic only available on first "ADC" */ + { + .num_items = 5, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + { "Front Mic", 0xb }, + { "Input Mix", 0xa }, + }, + }, + { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + { "Input Mix", 0xa }, + }, + }, + { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + { "Input Mix", 0xa }, + }, + } +}; + static struct snd_kcontrol_new alc888_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), @@ -1407,22 +1598,24 @@ static struct snd_kcontrol_new alc888_base_mixer[] = { { } /* end */ }; -static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec) +static void alc888_acer_aspire_4930g_init_hook(struct hda_codec *codec) { - unsigned int present; - unsigned int bits; - present = snd_hda_codec_read(codec, 0x15, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_amp(codec); } -static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec, - unsigned int res) +static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec) { - if (res >> 26 == ALC880_HP_EVENT) - alc888_acer_aspire_4930g_automute(codec); + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + spec->autocfg.speaker_pins[1] = 0x16; + spec->autocfg.speaker_pins[2] = 0x1b; + alc_automute_amp(codec); } /* @@ -2390,21 +2583,6 @@ static struct hda_verb alc880_beep_init_verbs[] = { { } }; -/* toggle speaker-output according to the hp-jack state */ -static void alc880_uniwill_hp_automute(struct hda_codec *codec) -{ - unsigned int present; - unsigned char bits; - - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); - snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); -} - /* auto-toggle front mic */ static void alc880_uniwill_mic_automute(struct hda_codec *codec) { @@ -2417,9 +2595,14 @@ static void alc880_uniwill_mic_automute(struct hda_codec *codec) snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits); } -static void alc880_uniwill_automute(struct hda_codec *codec) +static void alc880_uniwill_init_hook(struct hda_codec *codec) { - alc880_uniwill_hp_automute(codec); + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x16; + alc_automute_amp(codec); alc880_uniwill_mic_automute(codec); } @@ -2430,24 +2613,22 @@ static void alc880_uniwill_unsol_event(struct hda_codec *codec, * definition. 4bit tag is placed at 28 bit! */ switch (res >> 28) { - case ALC880_HP_EVENT: - alc880_uniwill_hp_automute(codec); - break; case ALC880_MIC_EVENT: alc880_uniwill_mic_automute(codec); break; + default: + alc_automute_amp_unsol_event(codec, res); + break; } } -static void alc880_uniwill_p53_hp_automute(struct hda_codec *codec) +static void alc880_uniwill_p53_init_hook(struct hda_codec *codec) { - unsigned int present; - unsigned char bits; + struct alc_spec *spec = codec->spec; - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, HDA_AMP_MUTE, bits); + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x15; + alc_automute_amp(codec); } static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec) @@ -2469,10 +2650,10 @@ static void alc880_uniwill_p53_unsol_event(struct hda_codec *codec, /* Looks like the unsol event is incompatible with the standard * definition. 4bit tag is placed at 28 bit! */ - if ((res >> 28) == ALC880_HP_EVENT) - alc880_uniwill_p53_hp_automute(codec); if ((res >> 28) == ALC880_DCVOL_EVENT) alc880_uniwill_p53_dcvol_automute(codec); + else + alc_automute_amp_unsol_event(codec, res); } /* @@ -2542,6 +2723,7 @@ static struct hda_verb alc880_pin_asus_init_verbs[] = { /* Enable GPIO mask and set output */ #define alc880_gpio1_init_verbs alc_gpio1_init_verbs #define alc880_gpio2_init_verbs alc_gpio2_init_verbs +#define alc880_gpio3_init_verbs alc_gpio3_init_verbs /* Clevo m520g init */ static struct hda_verb alc880_pin_clevo_init_verbs[] = { @@ -2704,30 +2886,18 @@ static struct hda_verb alc880_lg_init_verbs[] = { {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* jack sense */ - {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1}, + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, { } }; /* toggle speaker-output according to the hp-jack state */ -static void alc880_lg_automute(struct hda_codec *codec) +static void alc880_lg_init_hook(struct hda_codec *codec) { - unsigned int present; - unsigned char bits; - - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); -} + struct alc_spec *spec = codec->spec; -static void alc880_lg_unsol_event(struct hda_codec *codec, unsigned int res) -{ - /* Looks like the unsol event is incompatible with the standard - * definition. 4bit tag is placed at 28 bit! - */ - if ((res >> 28) == 0x01) - alc880_lg_automute(codec); + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x17; + alc_automute_amp(codec); } /* @@ -2801,30 +2971,18 @@ static struct hda_verb alc880_lg_lw_init_verbs[] = { {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* jack sense */ - {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1}, + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, { } }; /* toggle speaker-output according to the hp-jack state */ -static void alc880_lg_lw_automute(struct hda_codec *codec) +static void alc880_lg_lw_init_hook(struct hda_codec *codec) { - unsigned int present; - unsigned char bits; + struct alc_spec *spec = codec->spec; - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); -} - -static void alc880_lg_lw_unsol_event(struct hda_codec *codec, unsigned int res) -{ - /* Looks like the unsol event is incompatible with the standard - * definition. 4bit tag is placed at 28 bit! - */ - if ((res >> 28) == 0x01) - alc880_lg_lw_automute(codec); + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_amp(codec); } static struct snd_kcontrol_new alc880_medion_rim_mixer[] = { @@ -2871,16 +3029,10 @@ static struct hda_verb alc880_medion_rim_init_verbs[] = { /* toggle speaker-output according to the hp-jack state */ static void alc880_medion_rim_automute(struct hda_codec *codec) { - unsigned int present; - unsigned char bits; - - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) - & AC_PINSENSE_PRESENCE; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); - if (present) + struct alc_spec *spec = codec->spec; + alc_automute_amp(codec); + /* toggle EAPD */ + if (spec->jack_present) snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0); else snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 2); @@ -2896,6 +3048,15 @@ static void alc880_medion_rim_unsol_event(struct hda_codec *codec, alc880_medion_rim_automute(codec); } +static void alc880_medion_rim_init_hook(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x1b; + alc880_medion_rim_automute(codec); +} + #ifdef CONFIG_SND_HDA_POWER_SAVE static struct hda_amp_list alc880_loopbacks[] = { { 0x0b, HDA_INPUT, 0 }, @@ -2924,8 +3085,7 @@ static int alc_init(struct hda_codec *codec) unsigned int i; alc_fix_pll(codec); - if (codec->vendor_id == 0x10ec0888) - alc888_coef_init(codec); + alc_auto_init_amp(codec, spec->init_amp); for (i = 0; i < spec->num_init_verbs; i++) snd_hda_sequence_write(codec, spec->init_verbs[i]); @@ -3127,7 +3287,10 @@ static int alc_build_pcms(struct hda_codec *codec) if (spec->no_analog) goto skip_analog; + snprintf(spec->stream_name_analog, sizeof(spec->stream_name_analog), + "%s Analog", codec->chip_name); info->name = spec->stream_name_analog; + if (spec->stream_analog_playback) { if (snd_BUG_ON(!spec->multiout.dac_nids)) return -EINVAL; @@ -3153,6 +3316,9 @@ static int alc_build_pcms(struct hda_codec *codec) skip_analog: /* SPDIF for stream index #1 */ if (spec->multiout.dig_out_nid || spec->dig_in_nid) { + snprintf(spec->stream_name_digital, + sizeof(spec->stream_name_digital), + "%s Digital", codec->chip_name); codec->num_pcms = 2; codec->slave_dig_outs = spec->multiout.slave_dig_outs; info = spec->pcm_rec + 1; @@ -3755,7 +3921,7 @@ static struct alc_config_preset alc880_presets[] = { .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_f1734_capture_source, .unsol_event = alc880_uniwill_p53_unsol_event, - .init_hook = alc880_uniwill_p53_hp_automute, + .init_hook = alc880_uniwill_p53_init_hook, }, [ALC880_ASUS] = { .mixers = { alc880_asus_mixer }, @@ -3832,7 +3998,7 @@ static struct alc_config_preset alc880_presets[] = { .need_dac_fix = 1, .input_mux = &alc880_capture_source, .unsol_event = alc880_uniwill_unsol_event, - .init_hook = alc880_uniwill_automute, + .init_hook = alc880_uniwill_init_hook, }, [ALC880_UNIWILL_P53] = { .mixers = { alc880_uniwill_p53_mixer }, @@ -3844,7 +4010,7 @@ static struct alc_config_preset alc880_presets[] = { .channel_mode = alc880_threestack_modes, .input_mux = &alc880_capture_source, .unsol_event = alc880_uniwill_p53_unsol_event, - .init_hook = alc880_uniwill_p53_hp_automute, + .init_hook = alc880_uniwill_p53_init_hook, }, [ALC880_FUJITSU] = { .mixers = { alc880_fujitsu_mixer }, @@ -3858,7 +4024,7 @@ static struct alc_config_preset alc880_presets[] = { .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_capture_source, .unsol_event = alc880_uniwill_p53_unsol_event, - .init_hook = alc880_uniwill_p53_hp_automute, + .init_hook = alc880_uniwill_p53_init_hook, }, [ALC880_CLEVO] = { .mixers = { alc880_three_stack_mixer }, @@ -3883,8 +4049,8 @@ static struct alc_config_preset alc880_presets[] = { .channel_mode = alc880_lg_ch_modes, .need_dac_fix = 1, .input_mux = &alc880_lg_capture_source, - .unsol_event = alc880_lg_unsol_event, - .init_hook = alc880_lg_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc880_lg_init_hook, #ifdef CONFIG_SND_HDA_POWER_SAVE .loopbacks = alc880_lg_loopbacks, #endif @@ -3899,8 +4065,8 @@ static struct alc_config_preset alc880_presets[] = { .num_channel_mode = ARRAY_SIZE(alc880_lg_lw_modes), .channel_mode = alc880_lg_lw_modes, .input_mux = &alc880_lg_lw_capture_source, - .unsol_event = alc880_lg_lw_unsol_event, - .init_hook = alc880_lg_lw_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc880_lg_lw_init_hook, }, [ALC880_MEDION_RIM] = { .mixers = { alc880_medion_rim_mixer }, @@ -3914,7 +4080,7 @@ static struct alc_config_preset alc880_presets[] = { .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_medion_rim_capture_source, .unsol_event = alc880_medion_rim_unsol_event, - .init_hook = alc880_medion_rim_automute, + .init_hook = alc880_medion_rim_init_hook, }, #ifdef CONFIG_SND_DEBUG [ALC880_TEST] = { @@ -4199,7 +4365,6 @@ static void alc880_auto_init_multi_out(struct hda_codec *codec) struct alc_spec *spec = codec->spec; int i; - alc_subsystem_id(codec, 0x15, 0x1b, 0x14); for (i = 0; i < spec->autocfg.line_outs; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; int pin_type = get_pin_type(spec->autocfg.line_out_type); @@ -4304,6 +4469,8 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux[0]; + alc_ssid_check(codec, 0x15, 0x1b, 0x14); + return 1; } @@ -4361,8 +4528,8 @@ static int patch_alc880(struct hda_codec *codec) alc880_models, alc880_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for ALC880, " - "trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", codec->chip_name); board_config = ALC880_AUTO; } @@ -4389,12 +4556,10 @@ static int patch_alc880(struct hda_codec *codec) if (board_config != ALC880_AUTO) setup_preset(spec, &alc880_presets[board_config]); - spec->stream_name_analog = "ALC880 Analog"; spec->stream_analog_playback = &alc880_pcm_analog_playback; spec->stream_analog_capture = &alc880_pcm_analog_capture; spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture; - spec->stream_name_digital = "ALC880 Digital"; spec->stream_digital_playback = &alc880_pcm_digital_playback; spec->stream_digital_capture = &alc880_pcm_digital_capture; @@ -5679,7 +5844,6 @@ static void alc260_auto_init_multi_out(struct hda_codec *codec) struct alc_spec *spec = codec->spec; hda_nid_t nid; - alc_subsystem_id(codec, 0x10, 0x15, 0x0f); nid = spec->autocfg.line_out_pins[0]; if (nid) { int pin_type = get_pin_type(spec->autocfg.line_out_type); @@ -5789,6 +5953,8 @@ static int alc260_parse_auto_config(struct hda_codec *codec) spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux[0]; + alc_ssid_check(codec, 0x10, 0x15, 0x0f); + return 1; } @@ -6006,8 +6172,9 @@ static int patch_alc260(struct hda_codec *codec) alc260_models, alc260_cfg_tbl); if (board_config < 0) { - snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260, " - "trying auto-probe from BIOS...\n"); + snd_printd(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", + codec->chip_name); board_config = ALC260_AUTO; } @@ -6034,11 +6201,9 @@ static int patch_alc260(struct hda_codec *codec) if (board_config != ALC260_AUTO) setup_preset(spec, &alc260_presets[board_config]); - spec->stream_name_analog = "ALC260 Analog"; spec->stream_analog_playback = &alc260_pcm_analog_playback; spec->stream_analog_capture = &alc260_pcm_analog_capture; - spec->stream_name_digital = "ALC260 Digital"; spec->stream_digital_playback = &alc260_pcm_digital_playback; spec->stream_digital_capture = &alc260_pcm_digital_capture; @@ -6115,6 +6280,16 @@ static struct hda_input_mux alc882_capture_source = { { "CD", 0x4 }, }, }; + +static struct hda_input_mux mb5_capture_source = { + .num_items = 3, + .items = { + { "Mic", 0x1 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + /* * 2ch mode */ @@ -6202,6 +6377,34 @@ static struct hda_channel_mode alc885_mbp_6ch_modes[2] = { { 6, alc885_mbp_ch6_init }, }; +/* + * 2ch + * Speakers/Woofer/HP = Front + * LineIn = Input + */ +static struct hda_verb alc885_mb5_ch2_init[] = { + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + { } /* end */ +}; + +/* + * 6ch mode + * Speakers/HP = Front + * Woofer = LFE + * LineIn = Surround + */ +static struct hda_verb alc885_mb5_ch6_init[] = { + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, + { } /* end */ +}; + +static struct hda_channel_mode alc885_mb5_6ch_modes[2] = { + { 2, alc885_mb5_ch2_init }, + { 6, alc885_mb5_ch6_init }, +}; /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17 * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b @@ -6244,6 +6447,25 @@ static struct snd_kcontrol_new alc885_mbp3_mixer[] = { HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT), { } /* end */ }; + +static struct snd_kcontrol_new alc885_mb5_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_MUTE ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x19, 0x00, HDA_INPUT), + { } /* end */ +}; + static struct snd_kcontrol_new alc882_w2jc_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), @@ -6471,6 +6693,55 @@ static struct hda_verb alc882_macpro_init_verbs[] = { { } }; +/* Macbook 5,1 */ +static struct hda_verb alc885_mb5_init_verbs[] = { + /* DACs */ + {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Front mixer */ + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + /* Surround mixer */ + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + /* LFE mixer */ + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + /* HP mixer */ + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + /* Front Pin (0x0c) */ + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x18, AC_VERB_SET_CONNECT_SEL, 0x00}, + /* LFE Pin (0x0e) */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x02}, + /* HP Pin (0x0f) */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x03}, + /* Front Mic pin: input vref at 80% */ + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Line In pin */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + { } +}; + /* Macbook Pro rev3 */ static struct hda_verb alc885_mbp3_init_verbs[] = { /* Front mixer: unmute input/output amp left and right (volume = 0) */ @@ -6560,45 +6831,23 @@ static struct hda_verb alc885_imac24_init_verbs[] = { }; /* Toggle speaker-output according to the hp-jack state */ -static void alc885_imac24_automute(struct hda_codec *codec) +static void alc885_imac24_automute_init_hook(struct hda_codec *codec) { - unsigned int present; - - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); - snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); -} + struct alc_spec *spec = codec->spec; -/* Processes unsolicited events. */ -static void alc885_imac24_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - /* Headphone insertion or removal. */ - if ((res >> 26) == ALC880_HP_EVENT) - alc885_imac24_automute(codec); + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x18; + spec->autocfg.speaker_pins[1] = 0x1a; + alc_automute_amp(codec); } -static void alc885_mbp3_automute(struct hda_codec *codec) +static void alc885_mbp3_init_hook(struct hda_codec *codec) { - unsigned int present; - - present = snd_hda_codec_read(codec, 0x15, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? 0 : HDA_AMP_MUTE); + struct alc_spec *spec = codec->spec; -} -static void alc885_mbp3_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - /* Headphone insertion or removal. */ - if ((res >> 26) == ALC880_HP_EVENT) - alc885_mbp3_automute(codec); + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_amp(codec); } @@ -6623,24 +6872,25 @@ static struct hda_verb alc882_targa_verbs[] = { /* toggle speaker-output according to the hp-jack state */ static void alc882_targa_automute(struct hda_codec *codec) { - unsigned int present; - - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); + struct alc_spec *spec = codec->spec; + alc_automute_amp(codec); snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA, - present ? 1 : 3); + spec->jack_present ? 1 : 3); +} + +static void alc882_targa_init_hook(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x1b; + alc882_targa_automute(codec); } static void alc882_targa_unsol_event(struct hda_codec *codec, unsigned int res) { - /* Looks like the unsol event is incompatible with the standard - * definition. 4bit tag is placed at 26 bit! - */ - if (((res >> 26) == ALC880_HP_EVENT)) { + if ((res >> 26) == ALC880_HP_EVENT) alc882_targa_automute(codec); - } } static struct hda_verb alc882_asus_a7j_verbs[] = { @@ -6722,7 +6972,7 @@ static void alc885_macpro_init_hook(struct hda_codec *codec) static void alc885_imac24_init_hook(struct hda_codec *codec) { alc885_macpro_init_hook(codec); - alc885_imac24_automute(codec); + alc885_imac24_automute_init_hook(codec); } /* @@ -6815,6 +7065,7 @@ static const char *alc882_models[ALC882_MODEL_LAST] = { [ALC882_ASUS_A7J] = "asus-a7j", [ALC882_ASUS_A7M] = "asus-a7m", [ALC885_MACPRO] = "macpro", + [ALC885_MB5] = "mb5", [ALC885_MBP3] = "mbp3", [ALC885_IMAC24] = "imac24", [ALC882_AUTO] = "auto", @@ -6892,8 +7143,20 @@ static struct alc_config_preset alc882_presets[] = { .input_mux = &alc882_capture_source, .dig_out_nid = ALC882_DIGOUT_NID, .dig_in_nid = ALC882_DIGIN_NID, - .unsol_event = alc885_mbp3_unsol_event, - .init_hook = alc885_mbp3_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc885_mbp3_init_hook, + }, + [ALC885_MB5] = { + .mixers = { alc885_mb5_mixer, alc882_chmode_mixer }, + .init_verbs = { alc885_mb5_init_verbs, + alc880_gpio1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .channel_mode = alc885_mb5_6ch_modes, + .num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes), + .input_mux = &mb5_capture_source, + .dig_out_nid = ALC882_DIGOUT_NID, + .dig_in_nid = ALC882_DIGIN_NID, }, [ALC885_MACPRO] = { .mixers = { alc882_macpro_mixer }, @@ -6917,7 +7180,7 @@ static struct alc_config_preset alc882_presets[] = { .num_channel_mode = ARRAY_SIZE(alc882_ch_modes), .channel_mode = alc882_ch_modes, .input_mux = &alc882_capture_source, - .unsol_event = alc885_imac24_unsol_event, + .unsol_event = alc_automute_amp_unsol_event, .init_hook = alc885_imac24_init_hook, }, [ALC882_TARGA] = { @@ -6934,7 +7197,7 @@ static struct alc_config_preset alc882_presets[] = { .need_dac_fix = 1, .input_mux = &alc882_capture_source, .unsol_event = alc882_targa_unsol_event, - .init_hook = alc882_targa_automute, + .init_hook = alc882_targa_init_hook, }, [ALC882_ASUS_A7J] = { .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer }, @@ -7014,7 +7277,6 @@ static void alc882_auto_init_multi_out(struct hda_codec *codec) struct alc_spec *spec = codec->spec; int i; - alc_subsystem_id(codec, 0x15, 0x1b, 0x14); for (i = 0; i <= HDA_SIDE; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; int pin_type = get_pin_type(spec->autocfg.line_out_type); @@ -7197,10 +7459,17 @@ static int patch_alc882(struct hda_codec *codec) case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */ case 0x106b00a4: /* MacbookPro4,1 */ case 0x106b2c00: /* Macbook Pro rev3 */ - case 0x106b3600: /* Macbook 3.1 */ + /* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */ case 0x106b3800: /* MacbookPro4,1 - latter revision */ board_config = ALC885_MBP3; break; + case 0x106b3f00: /* Macbook 5,1 */ + case 0x106b4000: /* Macbook Pro 5,1 - FIXME: HP jack sense + * seems not working, so apparently + * no perfect solution yet + */ + board_config = ALC885_MB5; + break; default: /* ALC889A is handled better as ALC888-compatible */ if (codec->revision_id == 0x100101 || @@ -7208,8 +7477,9 @@ static int patch_alc882(struct hda_codec *codec) alc_free(codec); return patch_alc883(codec); } - printk(KERN_INFO "hda_codec: Unknown model for ALC882, " - "trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", + codec->chip_name); board_config = ALC882_AUTO; } } @@ -7239,14 +7509,6 @@ static int patch_alc882(struct hda_codec *codec) if (board_config != ALC882_AUTO) setup_preset(spec, &alc882_presets[board_config]); - if (codec->vendor_id == 0x10ec0885) { - spec->stream_name_analog = "ALC885 Analog"; - spec->stream_name_digital = "ALC885 Digital"; - } else { - spec->stream_name_analog = "ALC882 Analog"; - spec->stream_name_digital = "ALC882 Digital"; - } - spec->stream_analog_playback = &alc882_pcm_analog_playback; spec->stream_analog_capture = &alc882_pcm_analog_capture; /* FIXME: setup DAC5 */ @@ -7399,6 +7661,17 @@ static struct hda_input_mux alc883_asus_eee1601_capture_source = { }, }; +static struct hda_input_mux alc889A_mb31_capture_source = { + .num_items = 2, + .items = { + { "Mic", 0x0 }, + /* Front Mic (0x01) unused */ + { "Line", 0x2 }, + /* Line 2 (0x03) unused */ + /* CD (0x04) unsused? */ + }, +}; + /* * 2ch mode */ @@ -7448,6 +7721,73 @@ static struct hda_channel_mode alc883_3ST_6ch_modes[3] = { { 6, alc883_3ST_ch6_init }, }; + +/* + * 2ch mode + */ +static struct hda_verb alc883_4ST_ch2_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { } /* end */ +}; + +/* + * 4ch mode + */ +static struct hda_verb alc883_4ST_ch4_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +/* + * 6ch mode + */ +static struct hda_verb alc883_4ST_ch6_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +/* + * 8ch mode + */ +static struct hda_verb alc883_4ST_ch8_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +static struct hda_channel_mode alc883_4ST_8ch_modes[4] = { + { 2, alc883_4ST_ch2_init }, + { 4, alc883_4ST_ch4_init }, + { 6, alc883_4ST_ch6_init }, + { 8, alc883_4ST_ch8_init }, +}; + + /* * 2ch mode */ @@ -7517,6 +7857,49 @@ static struct hda_channel_mode alc883_sixstack_modes[2] = { { 8, alc883_sixstack_ch8_init }, }; +/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */ +static struct hda_verb alc889A_mb31_ch2_init[] = { + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP as front */ + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Line as input */ + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line off */ + { } /* end */ +}; + +/* 4ch mode (Speaker:front, Subwoofer:CLFE, Line:CLFE, Headphones:front) */ +static struct hda_verb alc889A_mb31_ch4_init[] = { + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP as front */ + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Line as output */ + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */ + { } /* end */ +}; + +/* 5ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:rear) */ +static struct hda_verb alc889A_mb31_ch5_init[] = { + {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* HP as rear */ + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Line as input */ + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line off */ + { } /* end */ +}; + +/* 6ch mode (Speaker:front, Subwoofer:off, Line:CLFE, Headphones:Rear) */ +static struct hda_verb alc889A_mb31_ch6_init[] = { + {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* HP as front */ + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Subwoofer off */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Line as output */ + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */ + { } /* end */ +}; + +static struct hda_channel_mode alc889A_mb31_6ch_modes[4] = { + { 2, alc889A_mb31_ch2_init }, + { 4, alc889A_mb31_ch4_init }, + { 5, alc889A_mb31_ch5_init }, + { 6, alc889A_mb31_ch6_init }, +}; + static struct hda_verb alc883_medion_eapd_verbs[] = { /* eanable EAPD on medion laptop */ {0x20, AC_VERB_SET_COEF_INDEX, 0x07}, @@ -7782,8 +8165,6 @@ static struct snd_kcontrol_new alc888_lenovo_sky_mixer[] = { HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0d, 2, 2, HDA_INPUT), HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), - HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x1a, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), @@ -7797,6 +8178,42 @@ static struct snd_kcontrol_new alc888_lenovo_sky_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc889A_mb31_mixer[] = { + /* Output mixers */ + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x00, + HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x02, HDA_INPUT), + /* Output switches */ + HDA_CODEC_MUTE("Enable Speaker", 0x14, 0x00, HDA_OUTPUT), + HDA_CODEC_MUTE("Enable Headphones", 0x15, 0x00, HDA_OUTPUT), + HDA_CODEC_MUTE_MONO("Enable LFE", 0x16, 2, 0x00, HDA_OUTPUT), + /* Boost mixers */ + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT), + HDA_CODEC_VOLUME("Line Boost", 0x1a, 0x00, HDA_INPUT), + /* Input mixers */ + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + { } /* end */ +}; + +static struct snd_kcontrol_new alc883_vaiott_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x19, 0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + { } /* end */ +}; + static struct hda_bind_ctls alc883_bind_cap_vol = { .ops = &snd_hda_bind_vol, .values = { @@ -7932,16 +8349,14 @@ static struct hda_verb alc883_init_verbs[] = { }; /* toggle speaker-output according to the hp-jack state */ -static void alc883_mitac_hp_automute(struct hda_codec *codec) +static void alc883_mitac_init_hook(struct hda_codec *codec) { - unsigned int present; + struct alc_spec *spec = codec->spec; - present = snd_hda_codec_read(codec, 0x15, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); - snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + spec->autocfg.speaker_pins[1] = 0x17; + alc_automute_amp(codec); } /* auto-toggle front mic */ @@ -7958,25 +8373,6 @@ static void alc883_mitac_mic_automute(struct hda_codec *codec) } */ -static void alc883_mitac_automute(struct hda_codec *codec) -{ - alc883_mitac_hp_automute(codec); - /* alc883_mitac_mic_automute(codec); */ -} - -static void alc883_mitac_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - switch (res >> 26) { - case ALC880_HP_EVENT: - alc883_mitac_hp_automute(codec); - break; - case ALC880_MIC_EVENT: - /* alc883_mitac_mic_automute(codec); */ - break; - } -} - static struct hda_verb alc883_mitac_verbs[] = { /* HP */ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, @@ -8028,14 +8424,24 @@ static struct hda_verb alc883_tagra_verbs[] = { {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */ - {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/surround */ - {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ +/* Connect Line-Out side jack (SPDIF) to Side */ + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, +/* Connect Mic jack to CLFE */ + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, +/* Connect Line-in jack to Surround */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, +/* Connect HP out jack to Front */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, - {0x01, AC_VERB_SET_GPIO_MASK, 0x03}, - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x03}, { } /* end */ }; @@ -8094,29 +8500,26 @@ static struct hda_verb alc888_6st_dell_verbs[] = { { } }; -static void alc888_3st_hp_front_automute(struct hda_codec *codec) -{ - unsigned int present, bits; +static struct hda_verb alc883_vaiott_verbs[] = { + /* HP */ + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); - snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); - snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); -} + /* enable unsolicited event */ + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + + { } /* end */ +}; -static void alc888_3st_hp_unsol_event(struct hda_codec *codec, - unsigned int res) +static void alc888_3st_hp_init_hook(struct hda_codec *codec) { - switch (res >> 26) { - case ALC880_HP_EVENT: - alc888_3st_hp_front_automute(codec); - break; - } + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x14; + spec->autocfg.speaker_pins[1] = 0x16; + spec->autocfg.speaker_pins[2] = 0x18; + alc_automute_amp(codec); } static struct hda_verb alc888_3st_hp_verbs[] = { @@ -8213,56 +8616,18 @@ static struct hda_verb alc883_medion_md2_verbs[] = { }; /* toggle speaker-output according to the hp-jack state */ -static void alc883_medion_md2_automute(struct hda_codec *codec) +static void alc883_medion_md2_init_hook(struct hda_codec *codec) { - unsigned int present; - - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); -} - -static void alc883_medion_md2_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) == ALC880_HP_EVENT) - alc883_medion_md2_automute(codec); -} - -/* toggle speaker-output according to the hp-jack state */ -static void alc883_tagra_automute(struct hda_codec *codec) -{ - unsigned int present; - unsigned char bits; - - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); - snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA, - present ? 1 : 3); -} + struct alc_spec *spec = codec->spec; -static void alc883_tagra_unsol_event(struct hda_codec *codec, unsigned int res) -{ - if ((res >> 26) == ALC880_HP_EVENT) - alc883_tagra_automute(codec); + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x15; + alc_automute_amp(codec); } /* toggle speaker-output according to the hp-jack state */ -static void alc883_clevo_m720_hp_automute(struct hda_codec *codec) -{ - unsigned int present; - unsigned char bits; - - present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0) - & AC_PINSENSE_PRESENCE; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); -} +#define alc883_tagra_init_hook alc882_targa_init_hook +#define alc883_tagra_unsol_event alc882_targa_unsol_event static void alc883_clevo_m720_mic_automute(struct hda_codec *codec) { @@ -8274,9 +8639,13 @@ static void alc883_clevo_m720_mic_automute(struct hda_codec *codec) HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); } -static void alc883_clevo_m720_automute(struct hda_codec *codec) +static void alc883_clevo_m720_init_hook(struct hda_codec *codec) { - alc883_clevo_m720_hp_automute(codec); + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_amp(codec); alc883_clevo_m720_mic_automute(codec); } @@ -8284,52 +8653,32 @@ static void alc883_clevo_m720_unsol_event(struct hda_codec *codec, unsigned int res) { switch (res >> 26) { - case ALC880_HP_EVENT: - alc883_clevo_m720_hp_automute(codec); - break; case ALC880_MIC_EVENT: alc883_clevo_m720_mic_automute(codec); break; + default: + alc_automute_amp_unsol_event(codec, res); + break; } } /* toggle speaker-output according to the hp-jack state */ -static void alc883_2ch_fujitsu_pi2515_automute(struct hda_codec *codec) +static void alc883_2ch_fujitsu_pi2515_init_hook(struct hda_codec *codec) { - unsigned int present; - unsigned char bits; - - present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0) - & AC_PINSENSE_PRESENCE; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); -} + struct alc_spec *spec = codec->spec; -static void alc883_2ch_fujitsu_pi2515_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) == ALC880_HP_EVENT) - alc883_2ch_fujitsu_pi2515_automute(codec); + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x15; + alc_automute_amp(codec); } -static void alc883_haier_w66_automute(struct hda_codec *codec) +static void alc883_haier_w66_init_hook(struct hda_codec *codec) { - unsigned int present; - unsigned char bits; + struct alc_spec *spec = codec->spec; - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? 0x80 : 0; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - 0x80, bits); -} - -static void alc883_haier_w66_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) == ALC880_HP_EVENT) - alc883_haier_w66_automute(codec); + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_amp(codec); } static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec) @@ -8337,8 +8686,8 @@ static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec) unsigned int present; unsigned char bits; - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; bits = present ? HDA_AMP_MUTE : 0; snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, HDA_AMP_MUTE, bits); @@ -8368,23 +8717,14 @@ static void alc883_lenovo_101e_unsol_event(struct hda_codec *codec, } /* toggle speaker-output according to the hp-jack state */ -static void alc883_acer_aspire_automute(struct hda_codec *codec) +static void alc883_acer_aspire_init_hook(struct hda_codec *codec) { - unsigned int present; - - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); - snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); -} + struct alc_spec *spec = codec->spec; -static void alc883_acer_aspire_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) == ALC880_HP_EVENT) - alc883_acer_aspire_automute(codec); + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x15; + spec->autocfg.speaker_pins[1] = 0x16; + alc_automute_amp(codec); } static struct hda_verb alc883_acer_eapd_verbs[] = { @@ -8405,75 +8745,39 @@ static struct hda_verb alc883_acer_eapd_verbs[] = { { } }; -static void alc888_6st_dell_front_automute(struct hda_codec *codec) +static void alc888_6st_dell_init_hook(struct hda_codec *codec) { - unsigned int present; - - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); - snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); - snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); -} + struct alc_spec *spec = codec->spec; -static void alc888_6st_dell_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - switch (res >> 26) { - case ALC880_HP_EVENT: - /* printk(KERN_DEBUG "hp_event\n"); */ - alc888_6st_dell_front_automute(codec); - break; - } + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x14; + spec->autocfg.speaker_pins[1] = 0x15; + spec->autocfg.speaker_pins[2] = 0x16; + spec->autocfg.speaker_pins[3] = 0x17; + alc_automute_amp(codec); } -static void alc888_lenovo_sky_front_automute(struct hda_codec *codec) +static void alc888_lenovo_sky_init_hook(struct hda_codec *codec) { - unsigned int mute; - unsigned int present; + struct alc_spec *spec = codec->spec; - snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0); - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0); - present = (present & 0x80000000) != 0; - if (present) { - /* mute internal speaker */ - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - } else { - /* unmute internal speaker if necessary */ - mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0); - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - } + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x14; + spec->autocfg.speaker_pins[1] = 0x15; + spec->autocfg.speaker_pins[2] = 0x16; + spec->autocfg.speaker_pins[3] = 0x17; + spec->autocfg.speaker_pins[4] = 0x1a; + alc_automute_amp(codec); } -static void alc883_lenovo_sky_unsol_event(struct hda_codec *codec, - unsigned int res) +static void alc883_vaiott_init_hook(struct hda_codec *codec) { - if ((res >> 26) == ALC880_HP_EVENT) - alc888_lenovo_sky_front_automute(codec); + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + spec->autocfg.speaker_pins[1] = 0x17; + alc_automute_amp(codec); } /* @@ -8561,39 +8865,33 @@ static void alc883_nb_mic_automute(struct hda_codec *codec) 0x7000 | (0x01 << 8) | (present ? 0x80 : 0)); } -static void alc883_M90V_speaker_automute(struct hda_codec *codec) +static void alc883_M90V_init_hook(struct hda_codec *codec) { - unsigned int present; - unsigned char bits; + struct alc_spec *spec = codec->spec; - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0) - & AC_PINSENSE_PRESENCE; - bits = present ? 0 : PIN_OUT; - snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - bits); - snd_hda_codec_write(codec, 0x15, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - bits); - snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - bits); + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x14; + spec->autocfg.speaker_pins[1] = 0x15; + spec->autocfg.speaker_pins[2] = 0x16; + alc_automute_pin(codec); } static void alc883_mode2_unsol_event(struct hda_codec *codec, unsigned int res) { switch (res >> 26) { - case ALC880_HP_EVENT: - alc883_M90V_speaker_automute(codec); - break; case ALC880_MIC_EVENT: alc883_nb_mic_automute(codec); break; + default: + alc_sku_unsol_event(codec, res); + break; } } static void alc883_mode2_inithook(struct hda_codec *codec) { - alc883_M90V_speaker_automute(codec); + alc883_M90V_init_hook(codec); alc883_nb_mic_automute(codec); } @@ -8610,32 +8908,49 @@ static struct hda_verb alc888_asus_eee1601_verbs[] = { { } /* end */ }; -static void alc883_eee1601_speaker_automute(struct hda_codec *codec) +static void alc883_eee1601_inithook(struct hda_codec *codec) { - unsigned int present; - unsigned char bits; + struct alc_spec *spec = codec->spec; - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0) - & AC_PINSENSE_PRESENCE; - bits = present ? 0 : PIN_OUT; - snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - bits); + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x1b; + alc_automute_pin(codec); } -static void alc883_eee1601_unsol_event(struct hda_codec *codec, - unsigned int res) +static struct hda_verb alc889A_mb31_verbs[] = { + /* Init rear pin (used as headphone output) */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4}, /* Apple Headphones */ + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Connect to front */ + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + /* Init line pin (used as output in 4ch and 6ch mode) */ + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x02}, /* Connect to CLFE */ + /* Init line 2 pin (used as headphone out by default) */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Use as input */ + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mute output */ + { } /* end */ +}; + +/* Mute speakers according to the headphone jack state */ +static void alc889A_mb31_automute(struct hda_codec *codec) { - switch (res >> 26) { - case ALC880_HP_EVENT: - alc883_eee1601_speaker_automute(codec); - break; + unsigned int present; + + /* Mute only in 2ch or 4ch mode */ + if (snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_CONNECT_SEL, 0) + == 0x00) { + present = snd_hda_codec_read(codec, 0x15, 0, + AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE; + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); + snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, + HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); } } -static void alc883_eee1601_inithook(struct hda_codec *codec) +static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res) { - alc883_eee1601_speaker_automute(codec); + if ((res >> 26) == ALC880_HP_EVENT) + alc889A_mb31_automute(codec); } #ifdef CONFIG_SND_HDA_POWER_SAVE @@ -8659,9 +8974,11 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { [ALC883_6ST_DIG] = "6stack-dig", [ALC883_TARGA_DIG] = "targa-dig", [ALC883_TARGA_2ch_DIG] = "targa-2ch-dig", + [ALC883_TARGA_8ch_DIG] = "targa-8ch-dig", [ALC883_ACER] = "acer", [ALC883_ACER_ASPIRE] = "acer-aspire", [ALC888_ACER_ASPIRE_4930G] = "acer-aspire-4930g", + [ALC888_ACER_ASPIRE_8930G] = "acer-aspire-8930g", [ALC883_MEDION] = "medion", [ALC883_MEDION_MD2] = "medion-md2", [ALC883_LAPTOP_EAPD] = "laptop-eapd", @@ -8678,6 +8995,8 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { [ALC888_FUJITSU_XA3530] = "fujitsu-xa3530", [ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel", [ALC1200_ASUS_P5Q] = "asus-p5q", + [ALC889A_MB31] = "mb31", + [ALC883_SONY_VAIO_TT] = "sony-vaio-tt", [ALC883_AUTO] = "auto", }; @@ -8693,14 +9012,18 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G", ALC888_ACER_ASPIRE_4930G), + SND_PCI_QUIRK(0x1025, 0x0145, "Acer Aspire 8930G", + ALC888_ACER_ASPIRE_8930G), SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO), SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO), SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G", ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G", ALC888_ACER_ASPIRE_4930G), - /* default Acer */ - SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), + /* default Acer -- disabled as it causes more problems. + * model=auto should work fine now + */ + /* SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), */ SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL), SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG), SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP), @@ -8736,6 +9059,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1462, 0x4314, "MSI", ALC883_TARGA_DIG), SND_PCI_QUIRK(0x1462, 0x4319, "MSI", ALC883_TARGA_DIG), SND_PCI_QUIRK(0x1462, 0x4324, "MSI", ALC883_TARGA_DIG), + SND_PCI_QUIRK(0x1462, 0x6510, "MSI GX620", ALC883_TARGA_8ch_DIG), SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x7250, "MSI", ALC883_6ST_DIG), @@ -8768,6 +9092,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC), SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch), + SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT), {} }; @@ -8848,7 +9173,7 @@ static struct alc_config_preset alc883_presets[] = { .need_dac_fix = 1, .input_mux = &alc883_capture_source, .unsol_event = alc883_tagra_unsol_event, - .init_hook = alc883_tagra_automute, + .init_hook = alc883_tagra_init_hook, }, [ALC883_TARGA_2ch_DIG] = { .mixers = { alc883_tagra_2ch_mixer}, @@ -8862,7 +9187,25 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_capture_source, .unsol_event = alc883_tagra_unsol_event, - .init_hook = alc883_tagra_automute, + .init_hook = alc883_tagra_init_hook, + }, + [ALC883_TARGA_8ch_DIG] = { + .mixers = { alc883_base_mixer, alc883_chmode_mixer }, + .init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs, + alc883_tagra_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev), + .adc_nids = alc883_adc_nids_rev, + .capsrc_nids = alc883_capsrc_nids_rev, + .dig_out_nid = ALC883_DIGOUT_NID, + .dig_in_nid = ALC883_DIGIN_NID, + .num_channel_mode = ARRAY_SIZE(alc883_4ST_8ch_modes), + .channel_mode = alc883_4ST_8ch_modes, + .need_dac_fix = 1, + .input_mux = &alc883_capture_source, + .unsol_event = alc883_tagra_unsol_event, + .init_hook = alc883_tagra_init_hook, }, [ALC883_ACER] = { .mixers = { alc883_base_mixer }, @@ -8887,8 +9230,8 @@ static struct alc_config_preset alc883_presets[] = { .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_capture_source, - .unsol_event = alc883_acer_aspire_unsol_event, - .init_hook = alc883_acer_aspire_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc883_acer_aspire_init_hook, }, [ALC888_ACER_ASPIRE_4930G] = { .mixers = { alc888_base_mixer, @@ -8907,8 +9250,29 @@ static struct alc_config_preset alc883_presets[] = { .num_mux_defs = ARRAY_SIZE(alc888_2_capture_sources), .input_mux = alc888_2_capture_sources, - .unsol_event = alc888_acer_aspire_4930g_unsol_event, - .init_hook = alc888_acer_aspire_4930g_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc888_acer_aspire_4930g_init_hook, + }, + [ALC888_ACER_ASPIRE_8930G] = { + .mixers = { alc888_base_mixer, + alc883_chmode_mixer }, + .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, + alc889_acer_aspire_8930g_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc889_adc_nids), + .adc_nids = alc889_adc_nids, + .capsrc_nids = alc889_capsrc_nids, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes), + .channel_mode = alc883_3ST_6ch_modes, + .need_dac_fix = 1, + .const_channel_count = 6, + .num_mux_defs = + ARRAY_SIZE(alc889_capture_sources), + .input_mux = alc889_capture_sources, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc889_acer_aspire_8930g_init_hook, }, [ALC883_MEDION] = { .mixers = { alc883_fivestack_mixer, @@ -8932,8 +9296,8 @@ static struct alc_config_preset alc883_presets[] = { .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_capture_source, - .unsol_event = alc883_medion_md2_unsol_event, - .init_hook = alc883_medion_md2_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc883_medion_md2_init_hook, }, [ALC883_LAPTOP_EAPD] = { .mixers = { alc883_base_mixer }, @@ -8954,7 +9318,7 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_capture_source, .unsol_event = alc883_clevo_m720_unsol_event, - .init_hook = alc883_clevo_m720_automute, + .init_hook = alc883_clevo_m720_init_hook, }, [ALC883_LENOVO_101E_2ch] = { .mixers = { alc883_lenovo_101e_2ch_mixer}, @@ -8978,8 +9342,8 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_3ST_2ch_modes, .need_dac_fix = 1, .input_mux = &alc883_lenovo_nb0763_capture_source, - .unsol_event = alc883_medion_md2_unsol_event, - .init_hook = alc883_medion_md2_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc883_medion_md2_init_hook, }, [ALC888_LENOVO_MS7195_DIG] = { .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer }, @@ -9003,8 +9367,8 @@ static struct alc_config_preset alc883_presets[] = { .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_capture_source, - .unsol_event = alc883_haier_w66_unsol_event, - .init_hook = alc883_haier_w66_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc883_haier_w66_init_hook, }, [ALC888_3ST_HP] = { .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer }, @@ -9015,8 +9379,8 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc888_3st_hp_modes, .need_dac_fix = 1, .input_mux = &alc883_capture_source, - .unsol_event = alc888_3st_hp_unsol_event, - .init_hook = alc888_3st_hp_front_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc888_3st_hp_init_hook, }, [ALC888_6ST_DELL] = { .mixers = { alc883_base_mixer, alc883_chmode_mixer }, @@ -9028,8 +9392,8 @@ static struct alc_config_preset alc883_presets[] = { .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes), .channel_mode = alc883_sixstack_modes, .input_mux = &alc883_capture_source, - .unsol_event = alc888_6st_dell_unsol_event, - .init_hook = alc888_6st_dell_front_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc888_6st_dell_init_hook, }, [ALC883_MITAC] = { .mixers = { alc883_mitac_mixer }, @@ -9039,8 +9403,8 @@ static struct alc_config_preset alc883_presets[] = { .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_capture_source, - .unsol_event = alc883_mitac_unsol_event, - .init_hook = alc883_mitac_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc883_mitac_init_hook, }, [ALC883_FUJITSU_PI2515] = { .mixers = { alc883_2ch_fujitsu_pi2515_mixer }, @@ -9052,8 +9416,8 @@ static struct alc_config_preset alc883_presets[] = { .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_fujitsu_pi2515_capture_source, - .unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event, - .init_hook = alc883_2ch_fujitsu_pi2515_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc883_2ch_fujitsu_pi2515_init_hook, }, [ALC888_FUJITSU_XA3530] = { .mixers = { alc888_base_mixer, alc883_chmode_mixer }, @@ -9070,8 +9434,8 @@ static struct alc_config_preset alc883_presets[] = { .num_mux_defs = ARRAY_SIZE(alc888_2_capture_sources), .input_mux = alc888_2_capture_sources, - .unsol_event = alc888_fujitsu_xa3530_unsol_event, - .init_hook = alc888_fujitsu_xa3530_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc888_fujitsu_xa3530_init_hook, }, [ALC888_LENOVO_SKY] = { .mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer }, @@ -9083,8 +9447,8 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_sixstack_modes, .need_dac_fix = 1, .input_mux = &alc883_lenovo_sky_capture_source, - .unsol_event = alc883_lenovo_sky_unsol_event, - .init_hook = alc888_lenovo_sky_front_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc888_lenovo_sky_init_hook, }, [ALC888_ASUS_M90V] = { .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer }, @@ -9112,7 +9476,7 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_3ST_2ch_modes, .need_dac_fix = 1, .input_mux = &alc883_asus_eee1601_capture_source, - .unsol_event = alc883_eee1601_unsol_event, + .unsol_event = alc_sku_unsol_event, .init_hook = alc883_eee1601_inithook, }, [ALC1200_ASUS_P5Q] = { @@ -9127,6 +9491,32 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_sixstack_modes, .input_mux = &alc883_capture_source, }, + [ALC889A_MB31] = { + .mixers = { alc889A_mb31_mixer, alc883_chmode_mixer}, + .init_verbs = { alc883_init_verbs, alc889A_mb31_verbs, + alc880_gpio1_init_verbs }, + .adc_nids = alc883_adc_nids, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), + .dac_nids = alc883_dac_nids, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .channel_mode = alc889A_mb31_6ch_modes, + .num_channel_mode = ARRAY_SIZE(alc889A_mb31_6ch_modes), + .input_mux = &alc889A_mb31_capture_source, + .dig_out_nid = ALC883_DIGOUT_NID, + .unsol_event = alc889A_mb31_unsol_event, + .init_hook = alc889A_mb31_automute, + }, + [ALC883_SONY_VAIO_TT] = { + .mixers = { alc883_vaiott_mixer }, + .init_verbs = { alc883_init_verbs, alc883_vaiott_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), + .channel_mode = alc883_3ST_2ch_modes, + .input_mux = &alc883_capture_source, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc883_vaiott_init_hook, + }, }; @@ -9155,7 +9545,6 @@ static void alc883_auto_init_multi_out(struct hda_codec *codec) struct alc_spec *spec = codec->spec; int i; - alc_subsystem_id(codec, 0x15, 0x1b, 0x14); for (i = 0; i <= HDA_SIDE; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; int pin_type = get_pin_type(spec->autocfg.line_out_type); @@ -9273,10 +9662,18 @@ static int patch_alc883(struct hda_codec *codec) board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST, alc883_models, alc883_cfg_tbl); - if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for ALC883, " - "trying auto-probe from BIOS...\n"); - board_config = ALC883_AUTO; + if (board_config < 0 || board_config >= ALC883_MODEL_LAST) { + /* Pick up systems that don't supply PCI SSID */ + switch (codec->subsystem_id) { + case 0x106b3600: /* Macbook 3.1 */ + board_config = ALC889A_MB31; + break; + default: + printk(KERN_INFO + "hda_codec: Unknown model for %s, trying " + "auto-probe from BIOS...\n", codec->chip_name); + board_config = ALC883_AUTO; + } } if (board_config == ALC883_AUTO) { @@ -9304,13 +9701,6 @@ static int patch_alc883(struct hda_codec *codec) switch (codec->vendor_id) { case 0x10ec0888: - if (codec->revision_id == 0x100101) { - spec->stream_name_analog = "ALC1200 Analog"; - spec->stream_name_digital = "ALC1200 Digital"; - } else { - spec->stream_name_analog = "ALC888 Analog"; - spec->stream_name_digital = "ALC888 Digital"; - } if (!spec->num_adc_nids) { spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids); spec->adc_nids = alc883_adc_nids; @@ -9318,10 +9708,9 @@ static int patch_alc883(struct hda_codec *codec) if (!spec->capsrc_nids) spec->capsrc_nids = alc883_capsrc_nids; spec->capture_style = CAPT_MIX; /* matrix-style capture */ + spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */ break; case 0x10ec0889: - spec->stream_name_analog = "ALC889 Analog"; - spec->stream_name_digital = "ALC889 Digital"; if (!spec->num_adc_nids) { spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids); spec->adc_nids = alc889_adc_nids; @@ -9332,8 +9721,6 @@ static int patch_alc883(struct hda_codec *codec) capture */ break; default: - spec->stream_name_analog = "ALC883 Analog"; - spec->stream_name_digital = "ALC883 Digital"; if (!spec->num_adc_nids) { spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids); spec->adc_nids = alc883_adc_nids; @@ -9413,24 +9800,6 @@ static struct snd_kcontrol_new alc262_base_mixer[] = { { } /* end */ }; -static struct snd_kcontrol_new alc262_hippo1_mixer[] = { - HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), - HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), - HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), - /*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/ - HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), - { } /* end */ -}; - /* update HP, line and mono-out pins according to the master switch */ static void alc262_hp_master_update(struct hda_codec *codec) { @@ -9486,14 +9855,7 @@ static void alc262_hp_wildwest_unsol_event(struct hda_codec *codec, alc262_hp_wildwest_automute(codec); } -static int alc262_hp_master_sw_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - struct alc_spec *spec = codec->spec; - *ucontrol->value.integer.value = spec->master_sw; - return 0; -} +#define alc262_hp_master_sw_get alc260_hp_master_sw_get static int alc262_hp_master_sw_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -9509,14 +9871,17 @@ static int alc262_hp_master_sw_put(struct snd_kcontrol *kcontrol, return 1; } +#define ALC262_HP_MASTER_SWITCH \ + { \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = "Master Playback Switch", \ + .info = snd_ctl_boolean_mono_info, \ + .get = alc262_hp_master_sw_get, \ + .put = alc262_hp_master_sw_put, \ + } + static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Master Playback Switch", - .info = snd_ctl_boolean_mono_info, - .get = alc262_hp_master_sw_get, - .put = alc262_hp_master_sw_put, - }, + ALC262_HP_MASTER_SWITCH, HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), @@ -9540,13 +9905,7 @@ static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = { }; static struct snd_kcontrol_new alc262_HP_BPC_WildWest_mixer[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Master Playback Switch", - .info = snd_ctl_boolean_mono_info, - .get = alc262_hp_master_sw_get, - .put = alc262_hp_master_sw_put, - }, + ALC262_HP_MASTER_SWITCH, HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), @@ -9573,32 +9932,13 @@ static struct snd_kcontrol_new alc262_HP_BPC_WildWest_option_mixer[] = { }; /* mute/unmute internal speaker according to the hp jack and mute state */ -static void alc262_hp_t5735_automute(struct hda_codec *codec, int force) +static void alc262_hp_t5735_init_hook(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - if (force || !spec->sense_updated) { - unsigned int present; - present = snd_hda_codec_read(codec, 0x15, 0, - AC_VERB_GET_PIN_SENSE, 0); - spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0; - spec->sense_updated = 1; - } - snd_hda_codec_amp_stereo(codec, 0x0c, HDA_OUTPUT, 0, HDA_AMP_MUTE, - spec->jack_present ? HDA_AMP_MUTE : 0); -} - -static void alc262_hp_t5735_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) != ALC880_HP_EVENT) - return; - alc262_hp_t5735_automute(codec, 1); -} - -static void alc262_hp_t5735_init_hook(struct hda_codec *codec) -{ - alc262_hp_t5735_automute(codec, 1); + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */ + alc_automute_amp(codec); } static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = { @@ -9651,46 +9991,132 @@ static struct hda_input_mux alc262_hp_rp5700_capture_source = { }, }; -/* bind hp and internal speaker mute (with plug check) */ -static int alc262_sony_master_sw_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) +/* bind hp and internal speaker mute (with plug check) as master switch */ +static void alc262_hippo_master_update(struct hda_codec *codec) { - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - long *valp = ucontrol->value.integer.value; - int change; + struct alc_spec *spec = codec->spec; + hda_nid_t hp_nid = spec->autocfg.hp_pins[0]; + hda_nid_t line_nid = spec->autocfg.line_out_pins[0]; + hda_nid_t speaker_nid = spec->autocfg.speaker_pins[0]; + unsigned int mute; - /* change hp mute */ - change = snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp[0] ? 0 : HDA_AMP_MUTE); - change |= snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp[1] ? 0 : HDA_AMP_MUTE); - if (change) { - /* change speaker according to HP jack state */ - struct alc_spec *spec = codec->spec; - unsigned int mute; - if (spec->jack_present) - mute = HDA_AMP_MUTE; - else - mute = snd_hda_codec_amp_read(codec, 0x15, 0, - HDA_OUTPUT, 0); - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + /* HP */ + mute = spec->master_sw ? 0 : HDA_AMP_MUTE; + snd_hda_codec_amp_stereo(codec, hp_nid, HDA_OUTPUT, 0, + HDA_AMP_MUTE, mute); + /* mute internal speaker per jack sense */ + if (spec->jack_present) + mute = HDA_AMP_MUTE; + if (line_nid) + snd_hda_codec_amp_stereo(codec, line_nid, HDA_OUTPUT, 0, HDA_AMP_MUTE, mute); + if (speaker_nid && speaker_nid != line_nid) + snd_hda_codec_amp_stereo(codec, speaker_nid, HDA_OUTPUT, 0, + HDA_AMP_MUTE, mute); +} + +#define alc262_hippo_master_sw_get alc262_hp_master_sw_get + +static int alc262_hippo_master_sw_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + struct alc_spec *spec = codec->spec; + int val = !!*ucontrol->value.integer.value; + + if (val == spec->master_sw) + return 0; + spec->master_sw = val; + alc262_hippo_master_update(codec); + return 1; +} + +#define ALC262_HIPPO_MASTER_SWITCH \ + { \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = "Master Playback Switch", \ + .info = snd_ctl_boolean_mono_info, \ + .get = alc262_hippo_master_sw_get, \ + .put = alc262_hippo_master_sw_put, \ } - return change; + +static struct snd_kcontrol_new alc262_hippo_mixer[] = { + ALC262_HIPPO_MASTER_SWITCH, + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + { } /* end */ +}; + +static struct snd_kcontrol_new alc262_hippo1_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + ALC262_HIPPO_MASTER_SWITCH, + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), + { } /* end */ +}; + +/* mute/unmute internal speaker according to the hp jack and mute state */ +static void alc262_hippo_automute(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + hda_nid_t hp_nid = spec->autocfg.hp_pins[0]; + unsigned int present; + + /* need to execute and sync at first */ + snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0); + present = snd_hda_codec_read(codec, hp_nid, 0, + AC_VERB_GET_PIN_SENSE, 0); + spec->jack_present = (present & 0x80000000) != 0; + alc262_hippo_master_update(codec); +} + +static void alc262_hippo_unsol_event(struct hda_codec *codec, unsigned int res) +{ + if ((res >> 26) != ALC880_HP_EVENT) + return; + alc262_hippo_automute(codec); +} + +static void alc262_hippo_init_hook(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + alc262_hippo_automute(codec); +} + +static void alc262_hippo1_init_hook(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x14; + alc262_hippo_automute(codec); } + static struct snd_kcontrol_new alc262_sony_mixer[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Master Playback Switch", - .info = snd_hda_mixer_amp_switch_info, - .get = snd_hda_mixer_amp_switch_get, - .put = alc262_sony_master_sw_put, - .private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT), - }, + ALC262_HIPPO_MASTER_SWITCH, HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), @@ -9699,8 +10125,8 @@ static struct snd_kcontrol_new alc262_sony_mixer[] = { }; static struct snd_kcontrol_new alc262_benq_t31_mixer[] = { - HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + ALC262_HIPPO_MASTER_SWITCH, HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), @@ -9741,34 +10167,15 @@ static struct hda_verb alc262_tyan_verbs[] = { }; /* unsolicited event for HP jack sensing */ -static void alc262_tyan_automute(struct hda_codec *codec) +static void alc262_tyan_init_hook(struct hda_codec *codec) { - unsigned int mute; - unsigned int present; + struct alc_spec *spec = codec->spec; - snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0); - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0); - present = (present & 0x80000000) != 0; - if (present) { - /* mute line output on ATX panel */ - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - } else { - /* unmute line output if necessary */ - mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0); - snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - } + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x15; + alc_automute_amp(codec); } -static void alc262_tyan_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) != ALC880_HP_EVENT) - return; - alc262_tyan_automute(codec); -} #define alc262_capture_mixer alc882_capture_mixer #define alc262_capture_alt_mixer alc882_capture_alt_mixer @@ -9923,99 +10330,25 @@ static void alc262_dmic_automute(struct hda_codec *codec) AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x09); } -/* toggle speaker-output according to the hp-jack state */ -static void alc262_toshiba_s06_speaker_automute(struct hda_codec *codec) -{ - unsigned int present; - unsigned char bits; - - present = snd_hda_codec_read(codec, 0x15, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? 0 : PIN_OUT; - snd_hda_codec_write(codec, 0x14, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, bits); -} - - /* unsolicited event for HP jack sensing */ static void alc262_toshiba_s06_unsol_event(struct hda_codec *codec, unsigned int res) { - if ((res >> 26) == ALC880_HP_EVENT) - alc262_toshiba_s06_speaker_automute(codec); if ((res >> 26) == ALC880_MIC_EVENT) alc262_dmic_automute(codec); - + else + alc_sku_unsol_event(codec, res); } static void alc262_toshiba_s06_init_hook(struct hda_codec *codec) { - alc262_toshiba_s06_speaker_automute(codec); - alc262_dmic_automute(codec); -} - -/* mute/unmute internal speaker according to the hp jack and mute state */ -static void alc262_hippo_automute(struct hda_codec *codec) -{ struct alc_spec *spec = codec->spec; - unsigned int mute; - unsigned int present; - - /* need to execute and sync at first */ - snd_hda_codec_read(codec, 0x15, 0, AC_VERB_SET_PIN_SENSE, 0); - present = snd_hda_codec_read(codec, 0x15, 0, - AC_VERB_GET_PIN_SENSE, 0); - spec->jack_present = (present & 0x80000000) != 0; - if (spec->jack_present) { - /* mute internal speaker */ - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - } else { - /* unmute internal speaker if necessary */ - mute = snd_hda_codec_amp_read(codec, 0x15, 0, HDA_OUTPUT, 0); - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - } -} - -/* unsolicited event for HP jack sensing */ -static void alc262_hippo_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) != ALC880_HP_EVENT) - return; - alc262_hippo_automute(codec); -} - -static void alc262_hippo1_automute(struct hda_codec *codec) -{ - unsigned int mute; - unsigned int present; - snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0); - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0); - present = (present & 0x80000000) != 0; - if (present) { - /* mute internal speaker */ - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - } else { - /* unmute internal speaker if necessary */ - mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0); - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - } -} - -/* unsolicited event for HP jack sensing */ -static void alc262_hippo1_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) != ALC880_HP_EVENT) - return; - alc262_hippo1_automute(codec); + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_pin(codec); + alc262_dmic_automute(codec); } /* @@ -10285,14 +10618,7 @@ static struct snd_kcontrol_new alc262_lenovo_3000_mixer[] = { static struct snd_kcontrol_new alc262_toshiba_rx1_mixer[] = { HDA_BIND_VOL("Master Playback Volume", &alc262_fujitsu_bind_master_vol), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Master Playback Switch", - .info = snd_hda_mixer_amp_switch_info, - .get = snd_hda_mixer_amp_switch_get, - .put = alc262_sony_master_sw_put, - .private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT), - }, + ALC262_HIPPO_MASTER_SWITCH, HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), @@ -10639,31 +10965,46 @@ static struct hda_verb alc262_HP_BPC_init_verbs[] = { {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 }, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, - {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 }, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, /* FIXME: use matrix-type input source selection */ - /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ - /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ + /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 0b, 12 */ + /* Input mixer1: only unmute Mic */ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))}, /* Input mixer2 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))}, /* Input mixer3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))}, {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, @@ -10843,6 +11184,8 @@ static int alc262_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + alc_ssid_check(codec, 0x15, 0x14, 0x1b); + return 1; } @@ -10945,7 +11288,7 @@ static struct alc_config_preset alc262_presets[] = { .input_mux = &alc262_capture_source, }, [ALC262_HIPPO] = { - .mixers = { alc262_base_mixer }, + .mixers = { alc262_hippo_mixer }, .init_verbs = { alc262_init_verbs, alc262_hippo_unsol_verbs}, .num_dacs = ARRAY_SIZE(alc262_dac_nids), .dac_nids = alc262_dac_nids, @@ -10955,7 +11298,7 @@ static struct alc_config_preset alc262_presets[] = { .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, .unsol_event = alc262_hippo_unsol_event, - .init_hook = alc262_hippo_automute, + .init_hook = alc262_hippo_init_hook, }, [ALC262_HIPPO_1] = { .mixers = { alc262_hippo1_mixer }, @@ -10967,8 +11310,8 @@ static struct alc_config_preset alc262_presets[] = { .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, - .unsol_event = alc262_hippo1_unsol_event, - .init_hook = alc262_hippo1_automute, + .unsol_event = alc262_hippo_unsol_event, + .init_hook = alc262_hippo1_init_hook, }, [ALC262_FUJITSU] = { .mixers = { alc262_fujitsu_mixer }, @@ -11030,7 +11373,7 @@ static struct alc_config_preset alc262_presets[] = { .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, - .unsol_event = alc262_hp_t5735_unsol_event, + .unsol_event = alc_automute_amp_unsol_event, .init_hook = alc262_hp_t5735_init_hook, }, [ALC262_HP_RP5700] = { @@ -11062,7 +11405,7 @@ static struct alc_config_preset alc262_presets[] = { .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, .unsol_event = alc262_hippo_unsol_event, - .init_hook = alc262_hippo_automute, + .init_hook = alc262_hippo_init_hook, }, [ALC262_BENQ_T31] = { .mixers = { alc262_benq_t31_mixer }, @@ -11074,7 +11417,7 @@ static struct alc_config_preset alc262_presets[] = { .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, .unsol_event = alc262_hippo_unsol_event, - .init_hook = alc262_hippo_automute, + .init_hook = alc262_hippo_init_hook, }, [ALC262_ULTRA] = { .mixers = { alc262_ultra_mixer }, @@ -11139,7 +11482,7 @@ static struct alc_config_preset alc262_presets[] = { .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, .unsol_event = alc262_hippo_unsol_event, - .init_hook = alc262_hippo_automute, + .init_hook = alc262_hippo_init_hook, }, [ALC262_TYAN] = { .mixers = { alc262_tyan_mixer }, @@ -11151,8 +11494,8 @@ static struct alc_config_preset alc262_presets[] = { .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, - .unsol_event = alc262_tyan_unsol_event, - .init_hook = alc262_tyan_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc262_tyan_init_hook, }, }; @@ -11187,8 +11530,8 @@ static int patch_alc262(struct hda_codec *codec) alc262_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for ALC262, " - "trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", codec->chip_name); board_config = ALC262_AUTO; } @@ -11217,11 +11560,9 @@ static int patch_alc262(struct hda_codec *codec) if (board_config != ALC262_AUTO) setup_preset(spec, &alc262_presets[board_config]); - spec->stream_name_analog = "ALC262 Analog"; spec->stream_analog_playback = &alc262_pcm_analog_playback; spec->stream_analog_capture = &alc262_pcm_analog_capture; - spec->stream_name_digital = "ALC262 Digital"; spec->stream_digital_playback = &alc262_pcm_digital_playback; spec->stream_digital_capture = &alc262_pcm_digital_capture; @@ -11296,6 +11637,17 @@ static struct snd_kcontrol_new alc268_base_mixer[] = { { } }; +static struct snd_kcontrol_new alc268_toshiba_mixer[] = { + /* output mixer control */ + HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT), + ALC262_HIPPO_MASTER_SWITCH, + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT), + { } +}; + /* bind Beep switches of both NID 0x0f and 0x10 */ static struct hda_bind_ctls alc268_bind_beep_sw = { .ops = &snd_hda_bind_sw, @@ -11319,8 +11671,6 @@ static struct hda_verb alc268_eapd_verbs[] = { }; /* Toshiba specific */ -#define alc268_toshiba_automute alc262_hippo_automute - static struct hda_verb alc268_toshiba_verbs[] = { {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, { } /* end */ @@ -11456,13 +11806,8 @@ static struct hda_verb alc268_acer_verbs[] = { }; /* unsolicited event for HP jack sensing */ -static void alc268_toshiba_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) != ALC880_HP_EVENT) - return; - alc268_toshiba_automute(codec); -} +#define alc268_toshiba_unsol_event alc262_hippo_unsol_event +#define alc268_toshiba_init_hook alc262_hippo_init_hook static void alc268_acer_unsol_event(struct hda_codec *codec, unsigned int res) @@ -11537,30 +11882,15 @@ static struct hda_verb alc268_dell_verbs[] = { }; /* mute/unmute internal speaker according to the hp jack and mute state */ -static void alc268_dell_automute(struct hda_codec *codec) +static void alc268_dell_init_hook(struct hda_codec *codec) { - unsigned int present; - unsigned int mute; - - present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0); - if (present & 0x80000000) - mute = HDA_AMP_MUTE; - else - mute = snd_hda_codec_amp_read(codec, 0x15, 0, HDA_OUTPUT, 0); - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); -} + struct alc_spec *spec = codec->spec; -static void alc268_dell_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) != ALC880_HP_EVENT) - return; - alc268_dell_automute(codec); + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_pin(codec); } -#define alc268_dell_init_hook alc268_dell_automute - static struct snd_kcontrol_new alc267_quanta_il1_mixer[] = { HDA_CODEC_VOLUME("Speaker Playback Volume", 0x2, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), @@ -11579,16 +11909,6 @@ static struct hda_verb alc267_quanta_il1_verbs[] = { { } }; -static void alc267_quanta_il1_hp_automute(struct hda_codec *codec) -{ - unsigned int present; - - present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0) - & AC_PINSENSE_PRESENCE; - snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - present ? 0 : PIN_OUT); -} - static void alc267_quanta_il1_mic_automute(struct hda_codec *codec) { unsigned int present; @@ -11600,9 +11920,13 @@ static void alc267_quanta_il1_mic_automute(struct hda_codec *codec) present ? 0x00 : 0x01); } -static void alc267_quanta_il1_automute(struct hda_codec *codec) +static void alc267_quanta_il1_init_hook(struct hda_codec *codec) { - alc267_quanta_il1_hp_automute(codec); + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_pin(codec); alc267_quanta_il1_mic_automute(codec); } @@ -11610,12 +11934,12 @@ static void alc267_quanta_il1_unsol_event(struct hda_codec *codec, unsigned int res) { switch (res >> 26) { - case ALC880_HP_EVENT: - alc267_quanta_il1_hp_automute(codec); - break; case ALC880_MIC_EVENT: alc267_quanta_il1_mic_automute(codec); break; + default: + alc_sku_unsol_event(codec, res); + break; } } @@ -12063,16 +12387,16 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { ALC268_ACER_ASPIRE_ONE), SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL), SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL), - SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA), - SND_PCI_QUIRK(0x103c, 0x30f1, "HP TX25xx series", ALC268_TOSHIBA), + SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP TX25xx series", + ALC268_TOSHIBA), SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST), - SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA), - SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA), - SND_PCI_QUIRK(0x1179, 0xff64, "TOSHIBA L305", ALC268_TOSHIBA), + SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO), + SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05", + ALC268_TOSHIBA), SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA), SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER), SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1), - SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO), + SND_PCI_QUIRK(0x1854, 0x1775, "LG R510", ALC268_DELL), {} }; @@ -12090,7 +12414,7 @@ static struct alc_config_preset alc268_presets[] = { .channel_mode = alc268_modes, .input_mux = &alc268_capture_source, .unsol_event = alc267_quanta_il1_unsol_event, - .init_hook = alc267_quanta_il1_automute, + .init_hook = alc267_quanta_il1_init_hook, }, [ALC268_3ST] = { .mixers = { alc268_base_mixer, alc268_capture_alt_mixer, @@ -12108,7 +12432,7 @@ static struct alc_config_preset alc268_presets[] = { .input_mux = &alc268_capture_source, }, [ALC268_TOSHIBA] = { - .mixers = { alc268_base_mixer, alc268_capture_alt_mixer, + .mixers = { alc268_toshiba_mixer, alc268_capture_alt_mixer, alc268_beep_mixer }, .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs, alc268_toshiba_verbs }, @@ -12122,7 +12446,7 @@ static struct alc_config_preset alc268_presets[] = { .channel_mode = alc268_modes, .input_mux = &alc268_capture_source, .unsol_event = alc268_toshiba_unsol_event, - .init_hook = alc268_toshiba_automute, + .init_hook = alc268_toshiba_init_hook, }, [ALC268_ACER] = { .mixers = { alc268_acer_mixer, alc268_capture_alt_mixer, @@ -12185,7 +12509,7 @@ static struct alc_config_preset alc268_presets[] = { .hp_nid = 0x02, .num_channel_mode = ARRAY_SIZE(alc268_modes), .channel_mode = alc268_modes, - .unsol_event = alc268_dell_unsol_event, + .unsol_event = alc_sku_unsol_event, .init_hook = alc268_dell_init_hook, .input_mux = &alc268_capture_source, }, @@ -12205,7 +12529,7 @@ static struct alc_config_preset alc268_presets[] = { .channel_mode = alc268_modes, .input_mux = &alc268_capture_source, .unsol_event = alc268_toshiba_unsol_event, - .init_hook = alc268_toshiba_automute + .init_hook = alc268_toshiba_init_hook }, #ifdef CONFIG_SND_DEBUG [ALC268_TEST] = { @@ -12243,8 +12567,8 @@ static int patch_alc268(struct hda_codec *codec) alc268_cfg_tbl); if (board_config < 0 || board_config >= ALC268_MODEL_LAST) { - printk(KERN_INFO "hda_codec: Unknown model for ALC268, " - "trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", codec->chip_name); board_config = ALC268_AUTO; } @@ -12265,14 +12589,6 @@ static int patch_alc268(struct hda_codec *codec) if (board_config != ALC268_AUTO) setup_preset(spec, &alc268_presets[board_config]); - if (codec->vendor_id == 0x10ec0267) { - spec->stream_name_analog = "ALC267 Analog"; - spec->stream_name_digital = "ALC267 Digital"; - } else { - spec->stream_name_analog = "ALC268 Analog"; - spec->stream_name_digital = "ALC268 Digital"; - } - spec->stream_analog_playback = &alc268_pcm_analog_playback; spec->stream_analog_capture = &alc268_pcm_analog_capture; spec->stream_analog_alt_capture = &alc268_pcm_analog_alt_capture; @@ -13099,8 +13415,8 @@ static int patch_alc269(struct hda_codec *codec) alc269_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for ALC269, " - "trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", codec->chip_name); board_config = ALC269_AUTO; } @@ -13127,7 +13443,6 @@ static int patch_alc269(struct hda_codec *codec) if (board_config != ALC269_AUTO) setup_preset(spec, &alc269_presets[board_config]); - spec->stream_name_analog = "ALC269 Analog"; if (codec->subsystem_id == 0x17aa3bf8) { /* Due to a hardware problem on Lenovo Ideadpad, we need to * fix the sample rate of analog I/O to 44.1kHz @@ -13138,7 +13453,6 @@ static int patch_alc269(struct hda_codec *codec) spec->stream_analog_playback = &alc269_pcm_analog_playback; spec->stream_analog_capture = &alc269_pcm_analog_capture; } - spec->stream_name_digital = "ALC269 Digital"; spec->stream_digital_playback = &alc269_pcm_digital_playback; spec->stream_digital_capture = &alc269_pcm_digital_capture; @@ -13927,7 +14241,6 @@ static void alc861_auto_init_multi_out(struct hda_codec *codec) struct alc_spec *spec = codec->spec; int i; - alc_subsystem_id(codec, 0x0e, 0x0f, 0x0b); for (i = 0; i < spec->autocfg.line_outs; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; int pin_type = get_pin_type(spec->autocfg.line_out_type); @@ -14010,6 +14323,8 @@ static int alc861_parse_auto_config(struct hda_codec *codec) spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids); set_capture_mixer(spec); + alc_ssid_check(codec, 0x0e, 0x0f, 0x0b); + return 1; } @@ -14199,8 +14514,8 @@ static int patch_alc861(struct hda_codec *codec) alc861_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for ALC861, " - "trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", codec->chip_name); board_config = ALC861_AUTO; } @@ -14227,11 +14542,9 @@ static int patch_alc861(struct hda_codec *codec) if (board_config != ALC861_AUTO) setup_preset(spec, &alc861_presets[board_config]); - spec->stream_name_analog = "ALC861 Analog"; spec->stream_analog_playback = &alc861_pcm_analog_playback; spec->stream_analog_capture = &alc861_pcm_analog_capture; - spec->stream_name_digital = "ALC861 Digital"; spec->stream_digital_playback = &alc861_pcm_digital_playback; spec->stream_digital_capture = &alc861_pcm_digital_capture; @@ -14618,19 +14931,6 @@ static struct hda_verb alc861vd_lenovo_unsol_verbs[] = { {} }; -/* toggle speaker-output according to the hp-jack state */ -static void alc861vd_lenovo_hp_automute(struct hda_codec *codec) -{ - unsigned int present; - unsigned char bits; - - present = snd_hda_codec_read(codec, 0x1b, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, bits); -} - static void alc861vd_lenovo_mic_automute(struct hda_codec *codec) { unsigned int present; @@ -14643,9 +14943,13 @@ static void alc861vd_lenovo_mic_automute(struct hda_codec *codec) HDA_AMP_MUTE, bits); } -static void alc861vd_lenovo_automute(struct hda_codec *codec) +static void alc861vd_lenovo_init_hook(struct hda_codec *codec) { - alc861vd_lenovo_hp_automute(codec); + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x1b; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_amp(codec); alc861vd_lenovo_mic_automute(codec); } @@ -14653,12 +14957,12 @@ static void alc861vd_lenovo_unsol_event(struct hda_codec *codec, unsigned int res) { switch (res >> 26) { - case ALC880_HP_EVENT: - alc861vd_lenovo_hp_automute(codec); - break; case ALC880_MIC_EVENT: alc861vd_lenovo_mic_automute(codec); break; + default: + alc_automute_amp_unsol_event(codec, res); + break; } } @@ -14708,20 +15012,13 @@ static struct hda_verb alc861vd_dallas_verbs[] = { }; /* toggle speaker-output according to the hp-jack state */ -static void alc861vd_dallas_automute(struct hda_codec *codec) +static void alc861vd_dallas_init_hook(struct hda_codec *codec) { - unsigned int present; - - present = snd_hda_codec_read(codec, 0x15, 0, - AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); -} + struct alc_spec *spec = codec->spec; -static void alc861vd_dallas_unsol_event(struct hda_codec *codec, unsigned int res) -{ - if ((res >> 26) == ALC880_HP_EVENT) - alc861vd_dallas_automute(codec); + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + alc_automute_amp(codec); } #ifdef CONFIG_SND_HDA_POWER_SAVE @@ -14835,7 +15132,7 @@ static struct alc_config_preset alc861vd_presets[] = { .channel_mode = alc861vd_3stack_2ch_modes, .input_mux = &alc861vd_capture_source, .unsol_event = alc861vd_lenovo_unsol_event, - .init_hook = alc861vd_lenovo_automute, + .init_hook = alc861vd_lenovo_init_hook, }, [ALC861VD_DALLAS] = { .mixers = { alc861vd_dallas_mixer }, @@ -14845,8 +15142,8 @@ static struct alc_config_preset alc861vd_presets[] = { .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes), .channel_mode = alc861vd_3stack_2ch_modes, .input_mux = &alc861vd_dallas_capture_source, - .unsol_event = alc861vd_dallas_unsol_event, - .init_hook = alc861vd_dallas_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc861vd_dallas_init_hook, }, [ALC861VD_HP] = { .mixers = { alc861vd_hp_mixer }, @@ -14857,8 +15154,8 @@ static struct alc_config_preset alc861vd_presets[] = { .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes), .channel_mode = alc861vd_3stack_2ch_modes, .input_mux = &alc861vd_hp_capture_source, - .unsol_event = alc861vd_dallas_unsol_event, - .init_hook = alc861vd_dallas_automute, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc861vd_dallas_init_hook, }, [ALC660VD_ASUS_V1S] = { .mixers = { alc861vd_lenovo_mixer }, @@ -14873,7 +15170,7 @@ static struct alc_config_preset alc861vd_presets[] = { .channel_mode = alc861vd_3stack_2ch_modes, .input_mux = &alc861vd_capture_source, .unsol_event = alc861vd_lenovo_unsol_event, - .init_hook = alc861vd_lenovo_automute, + .init_hook = alc861vd_lenovo_init_hook, }, }; @@ -14891,7 +15188,6 @@ static void alc861vd_auto_init_multi_out(struct hda_codec *codec) struct alc_spec *spec = codec->spec; int i; - alc_subsystem_id(codec, 0x15, 0x1b, 0x14); for (i = 0; i <= HDA_SIDE; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; int pin_type = get_pin_type(spec->autocfg.line_out_type); @@ -15109,6 +15405,8 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + alc_ssid_check(codec, 0x15, 0x1b, 0x14); + return 1; } @@ -15140,8 +15438,8 @@ static int patch_alc861vd(struct hda_codec *codec) alc861vd_cfg_tbl); if (board_config < 0 || board_config >= ALC861VD_MODEL_LAST) { - printk(KERN_INFO "hda_codec: Unknown model for ALC660VD/" - "ALC861VD, trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", codec->chip_name); board_config = ALC861VD_AUTO; } @@ -15169,13 +15467,8 @@ static int patch_alc861vd(struct hda_codec *codec) setup_preset(spec, &alc861vd_presets[board_config]); if (codec->vendor_id == 0x10ec0660) { - spec->stream_name_analog = "ALC660-VD Analog"; - spec->stream_name_digital = "ALC660-VD Digital"; /* always turn on EAPD */ add_verb(spec, alc660vd_eapd_verbs); - } else { - spec->stream_name_analog = "ALC861VD Analog"; - spec->stream_name_digital = "ALC861VD Digital"; } spec->stream_analog_playback = &alc861vd_pcm_analog_playback; @@ -15289,6 +15582,38 @@ static struct hda_input_mux alc663_m51va_capture_source = { }, }; +#if 1 /* set to 0 for testing other input sources below */ +static struct hda_input_mux alc272_nc10_capture_source = { + .num_items = 2, + .items = { + { "Autoselect Mic", 0x0 }, + { "Internal Mic", 0x1 }, + }, +}; +#else +static struct hda_input_mux alc272_nc10_capture_source = { + .num_items = 16, + .items = { + { "Autoselect Mic", 0x0 }, + { "Internal Mic", 0x1 }, + { "In-0x02", 0x2 }, + { "In-0x03", 0x3 }, + { "In-0x04", 0x4 }, + { "In-0x05", 0x5 }, + { "In-0x06", 0x6 }, + { "In-0x07", 0x7 }, + { "In-0x08", 0x8 }, + { "In-0x09", 0x9 }, + { "In-0x0a", 0x0a }, + { "In-0x0b", 0x0b }, + { "In-0x0c", 0x0c }, + { "In-0x0d", 0x0d }, + { "In-0x0e", 0x0e }, + { "In-0x0f", 0x0f }, + }, +}; +#endif + /* * 2ch mode */ @@ -15428,10 +15753,8 @@ static struct snd_kcontrol_new alc662_lenovo_101e_mixer[] = { }; static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = { - HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), - - HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Line-Out Playback Switch", 0x1b, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT), + ALC262_HIPPO_MASTER_SWITCH, HDA_CODEC_VOLUME("e-Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_VOLUME("e-Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), @@ -15444,15 +15767,11 @@ static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = { }; static struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = { - HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Line-Out Playback Switch", 0x14, 0x0, HDA_OUTPUT), + ALC262_HIPPO_MASTER_SWITCH, + HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Surround Playback Switch", 0x03, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Center Playback Switch", 0x04, 1, 2, HDA_INPUT), - HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x04, 2, 2, HDA_INPUT), - HDA_CODEC_MUTE("Speaker Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("MuteCtrl Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), @@ -15960,51 +16279,25 @@ static void alc662_eeepc_mic_automute(struct hda_codec *codec) static void alc662_eeepc_unsol_event(struct hda_codec *codec, unsigned int res) { - if ((res >> 26) == ALC880_HP_EVENT) - alc262_hippo1_automute( codec ); - if ((res >> 26) == ALC880_MIC_EVENT) alc662_eeepc_mic_automute(codec); + else + alc262_hippo_unsol_event(codec, res); } static void alc662_eeepc_inithook(struct hda_codec *codec) { - alc262_hippo1_automute( codec ); + alc262_hippo1_init_hook(codec); alc662_eeepc_mic_automute(codec); } -static void alc662_eeepc_ep20_automute(struct hda_codec *codec) -{ - unsigned int mute; - unsigned int present; - - snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0); - present = snd_hda_codec_read(codec, 0x14, 0, - AC_VERB_GET_PIN_SENSE, 0); - present = (present & 0x80000000) != 0; - if (present) { - /* mute internal speaker */ - snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - } else { - /* unmute internal speaker if necessary */ - mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0); - snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0, - HDA_AMP_MUTE, mute); - } -} - -/* unsolicited event for HP jack sensing */ -static void alc662_eeepc_ep20_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) == ALC880_HP_EVENT) - alc662_eeepc_ep20_automute(codec); -} - static void alc662_eeepc_ep20_inithook(struct hda_codec *codec) { - alc662_eeepc_ep20_automute(codec); + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x14; + spec->autocfg.speaker_pins[0] = 0x1b; + alc262_hippo_master_update(codec); } static void alc663_m51va_speaker_automute(struct hda_codec *codec) @@ -16338,35 +16631,9 @@ static void alc663_g50v_inithook(struct hda_codec *codec) alc662_eeepc_mic_automute(codec); } -/* bind hp and internal speaker mute (with plug check) */ -static int alc662_ecs_master_sw_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - long *valp = ucontrol->value.integer.value; - int change; - - change = snd_hda_codec_amp_update(codec, 0x1b, 0, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp[0] ? 0 : HDA_AMP_MUTE); - change |= snd_hda_codec_amp_update(codec, 0x1b, 1, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp[1] ? 0 : HDA_AMP_MUTE); - if (change) - alc262_hippo1_automute(codec); - return change; -} - static struct snd_kcontrol_new alc662_ecs_mixer[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Master Playback Switch", - .info = snd_hda_mixer_amp_switch_info, - .get = snd_hda_mixer_amp_switch_get, - .put = alc662_ecs_master_sw_put, - .private_value = HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT), - }, + ALC262_HIPPO_MASTER_SWITCH, HDA_CODEC_VOLUME("e-Mic/LineIn Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_VOLUME("e-Mic/LineIn Playback Volume", 0x0b, 0x0, HDA_INPUT), @@ -16378,6 +16645,23 @@ static struct snd_kcontrol_new alc662_ecs_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc272_nc10_mixer[] = { + /* Master Playback automatically created from Speaker and Headphone */ + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME("Ext Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Ext Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Ext Mic Boost", 0x18, 0, HDA_INPUT), + + HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT), + { } /* end */ +}; + #ifdef CONFIG_SND_HDA_POWER_SAVE #define alc662_loopbacks alc880_loopbacks #endif @@ -16411,6 +16695,9 @@ static const char *alc662_models[ALC662_MODEL_LAST] = { [ALC663_ASUS_MODE4] = "asus-mode4", [ALC663_ASUS_MODE5] = "asus-mode5", [ALC663_ASUS_MODE6] = "asus-mode6", + [ALC272_DELL] = "dell", + [ALC272_DELL_ZM1] = "dell-zm1", + [ALC272_SAMSUNG_NC10] = "samsung-nc10", [ALC662_AUTO] = "auto", }; @@ -16468,6 +16755,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS), SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K", ALC662_3ST_6ch_DIG), + SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10), SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L", ALC662_3ST_6ch_DIG), SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG), @@ -16558,7 +16846,7 @@ static struct alc_config_preset alc662_presets[] = { .num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes), .channel_mode = alc662_3ST_6ch_modes, .input_mux = &alc662_lenovo_101e_capture_source, - .unsol_event = alc662_eeepc_ep20_unsol_event, + .unsol_event = alc662_eeepc_unsol_event, .init_hook = alc662_eeepc_ep20_inithook, }, [ALC662_ECS] = { @@ -16739,6 +17027,18 @@ static struct alc_config_preset alc662_presets[] = { .unsol_event = alc663_m51va_unsol_event, .init_hook = alc663_m51va_inithook, }, + [ALC272_SAMSUNG_NC10] = { + .mixers = { alc272_nc10_mixer }, + .init_verbs = { alc662_init_verbs, + alc663_21jd_amic_init_verbs }, + .num_dacs = ARRAY_SIZE(alc272_dac_nids), + .dac_nids = alc272_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .channel_mode = alc662_3ST_2ch_modes, + .input_mux = &alc272_nc10_capture_source, + .unsol_event = alc663_mode4_unsol_event, + .init_hook = alc663_mode4_inithook, + }, }; @@ -16933,7 +17233,6 @@ static void alc662_auto_init_multi_out(struct hda_codec *codec) struct alc_spec *spec = codec->spec; int i; - alc_subsystem_id(codec, 0x15, 0x1b, 0x14); for (i = 0; i <= HDA_SIDE; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; int pin_type = get_pin_type(spec->autocfg.line_out_type); @@ -17030,6 +17329,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + alc_ssid_check(codec, 0x15, 0x1b, 0x14); + return 1; } @@ -17062,8 +17363,8 @@ static int patch_alc662(struct hda_codec *codec) alc662_models, alc662_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for ALC662, " - "trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", codec->chip_name); board_config = ALC662_AUTO; } @@ -17090,17 +17391,6 @@ static int patch_alc662(struct hda_codec *codec) if (board_config != ALC662_AUTO) setup_preset(spec, &alc662_presets[board_config]); - if (codec->vendor_id == 0x10ec0663) { - spec->stream_name_analog = "ALC663 Analog"; - spec->stream_name_digital = "ALC663 Digital"; - } else if (codec->vendor_id == 0x10ec0272) { - spec->stream_name_analog = "ALC272 Analog"; - spec->stream_name_digital = "ALC272 Digital"; - } else { - spec->stream_name_analog = "ALC662 Analog"; - spec->stream_name_digital = "ALC662 Digital"; - } - spec->stream_analog_playback = &alc662_pcm_analog_playback; spec->stream_analog_capture = &alc662_pcm_analog_capture; diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d2fd8ef..93e47c9 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -100,6 +100,7 @@ enum { STAC_HP_M4, STAC_HP_DV5, STAC_HP_HDX, + STAC_HP_DV4_1222NR, STAC_92HD71BXX_MODELS }; @@ -193,6 +194,7 @@ struct sigmatel_spec { unsigned int gpio_dir; unsigned int gpio_data; unsigned int gpio_mute; + unsigned int gpio_led; /* stream */ unsigned int stream_delay; @@ -634,6 +636,40 @@ static int stac92xx_smux_enum_put(struct snd_kcontrol *kcontrol, return 0; } +static unsigned int stac92xx_vref_set(struct hda_codec *codec, + hda_nid_t nid, unsigned int new_vref) +{ + unsigned int error; + unsigned int pincfg; + pincfg = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_PIN_WIDGET_CONTROL, 0); + + pincfg &= 0xff; + pincfg &= ~(AC_PINCTL_VREFEN | AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN); + pincfg |= new_vref; + + if (new_vref == AC_PINCTL_VREF_HIZ) + pincfg |= AC_PINCTL_OUT_EN; + else + pincfg |= AC_PINCTL_IN_EN; + + error = snd_hda_codec_write_cache(codec, nid, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, pincfg); + if (error < 0) + return error; + else + return 1; +} + +static unsigned int stac92xx_vref_get(struct hda_codec *codec, hda_nid_t nid) +{ + unsigned int vref; + vref = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_PIN_WIDGET_CONTROL, 0); + vref &= AC_PINCTL_VREFEN; + return vref; +} + static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); @@ -995,6 +1031,17 @@ static struct hda_verb stac9205_core_init[] = { .private_value = verb_read | (verb_write << 16), \ } +#define DC_BIAS(xname, idx, nid) \ + { \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = idx, \ + .info = stac92xx_dc_bias_info, \ + .get = stac92xx_dc_bias_get, \ + .put = stac92xx_dc_bias_put, \ + .private_value = nid, \ + } + static struct snd_kcontrol_new stac9200_mixer[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT), HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT), @@ -1543,6 +1590,8 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30, + "SigmaTel",STAC_9205_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, "DFI LanParty", STAC_REF), /* Dell laptops have BIOS problem */ @@ -1837,6 +1886,7 @@ static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = { [STAC_HP_M4] = NULL, [STAC_HP_DV5] = NULL, [STAC_HP_HDX] = NULL, + [STAC_HP_DV4_1222NR] = NULL, }; static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = { @@ -1848,6 +1898,7 @@ static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = { [STAC_HP_M4] = "hp-m4", [STAC_HP_DV5] = "hp-dv5", [STAC_HP_HDX] = "hp-hdx", + [STAC_HP_DV4_1222NR] = "hp-dv4-1222nr", }; static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { @@ -1856,6 +1907,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD71BXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, "DFI LanParty", STAC_92HD71BXX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb, + "HP dv4-1222nr", STAC_HP_DV4_1222NR), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080, "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0, @@ -2545,7 +2598,8 @@ static int stac92xx_build_pcms(struct hda_codec *codec) return 0; } -static unsigned int stac92xx_get_vref(struct hda_codec *codec, hda_nid_t nid) +static unsigned int stac92xx_get_default_vref(struct hda_codec *codec, + hda_nid_t nid) { unsigned int pincap = snd_hda_query_pin_caps(codec, nid); pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT; @@ -2599,15 +2653,108 @@ static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol, return 1; } -#define stac92xx_io_switch_info snd_ctl_boolean_mono_info +static int stac92xx_dc_bias_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + int i; + static char *texts[] = { + "Mic In", "Line In", "Line Out" + }; + + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + struct sigmatel_spec *spec = codec->spec; + hda_nid_t nid = kcontrol->private_value; + + if (nid == spec->mic_switch || nid == spec->line_switch) + i = 3; + else + i = 2; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->value.enumerated.items = i; + uinfo->count = 1; + if (uinfo->value.enumerated.item >= i) + uinfo->value.enumerated.item = i-1; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + + return 0; +} + +static int stac92xx_dc_bias_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + hda_nid_t nid = kcontrol->private_value; + unsigned int vref = stac92xx_vref_get(codec, nid); + + if (vref == stac92xx_get_default_vref(codec, nid)) + ucontrol->value.enumerated.item[0] = 0; + else if (vref == AC_PINCTL_VREF_GRD) + ucontrol->value.enumerated.item[0] = 1; + else if (vref == AC_PINCTL_VREF_HIZ) + ucontrol->value.enumerated.item[0] = 2; + + return 0; +} + +static int stac92xx_dc_bias_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int new_vref = 0; + unsigned int error; + hda_nid_t nid = kcontrol->private_value; + + if (ucontrol->value.enumerated.item[0] == 0) + new_vref = stac92xx_get_default_vref(codec, nid); + else if (ucontrol->value.enumerated.item[0] == 1) + new_vref = AC_PINCTL_VREF_GRD; + else if (ucontrol->value.enumerated.item[0] == 2) + new_vref = AC_PINCTL_VREF_HIZ; + else + return 0; + + if (new_vref != stac92xx_vref_get(codec, nid)) { + error = stac92xx_vref_set(codec, nid, new_vref); + return error; + } + + return 0; +} + +static int stac92xx_io_switch_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[2]; + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + struct sigmatel_spec *spec = codec->spec; + + if (kcontrol->private_value == spec->line_switch) + texts[0] = "Line In"; + else + texts[0] = "Mic In"; + texts[1] = "Line Out"; + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->value.enumerated.items = 2; + uinfo->count = 1; + + if (uinfo->value.enumerated.item >= 2) + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + + return 0; +} static int stac92xx_io_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - int io_idx = kcontrol-> private_value & 0xff; + hda_nid_t nid = kcontrol->private_value; + int io_idx = (nid == spec->mic_switch) ? 1 : 0; - ucontrol->value.integer.value[0] = spec->io_switch[io_idx]; + ucontrol->value.enumerated.item[0] = spec->io_switch[io_idx]; return 0; } @@ -2615,9 +2762,9 @@ static int stac92xx_io_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_ { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - hda_nid_t nid = kcontrol->private_value >> 8; - int io_idx = kcontrol-> private_value & 0xff; - unsigned short val = !!ucontrol->value.integer.value[0]; + hda_nid_t nid = kcontrol->private_value; + int io_idx = (nid == spec->mic_switch) ? 1 : 0; + unsigned short val = !!ucontrol->value.enumerated.item[0]; spec->io_switch[io_idx] = val; @@ -2626,7 +2773,7 @@ static int stac92xx_io_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_ else { unsigned int pinctl = AC_PINCTL_IN_EN; if (io_idx) /* set VREF for mic */ - pinctl |= stac92xx_get_vref(codec, nid); + pinctl |= stac92xx_get_default_vref(codec, nid); stac92xx_auto_set_pinctl(codec, nid, pinctl); } @@ -2707,7 +2854,8 @@ enum { STAC_CTL_WIDGET_AMP_VOL, STAC_CTL_WIDGET_HP_SWITCH, STAC_CTL_WIDGET_IO_SWITCH, - STAC_CTL_WIDGET_CLFE_SWITCH + STAC_CTL_WIDGET_CLFE_SWITCH, + STAC_CTL_WIDGET_DC_BIAS }; static struct snd_kcontrol_new stac92xx_control_templates[] = { @@ -2719,6 +2867,7 @@ static struct snd_kcontrol_new stac92xx_control_templates[] = { STAC_CODEC_HP_SWITCH(NULL), STAC_CODEC_IO_SWITCH(NULL, 0), STAC_CODEC_CLFE_SWITCH(NULL, 0), + DC_BIAS(NULL, 0, 0), }; /* add dynamic controls */ @@ -2782,6 +2931,34 @@ static struct snd_kcontrol_new stac_input_src_temp = { .put = stac92xx_mux_enum_put, }; +static inline int stac92xx_add_jack_mode_control(struct hda_codec *codec, + hda_nid_t nid, int idx) +{ + int def_conf = snd_hda_codec_get_pincfg(codec, nid); + int control = 0; + struct sigmatel_spec *spec = codec->spec; + char name[22]; + + if (!((get_defcfg_connect(def_conf)) & AC_JACK_PORT_FIXED)) { + if (stac92xx_get_default_vref(codec, nid) == AC_PINCTL_VREF_GRD + && nid == spec->line_switch) + control = STAC_CTL_WIDGET_IO_SWITCH; + else if (snd_hda_query_pin_caps(codec, nid) + & (AC_PINCAP_VREF_GRD << AC_PINCAP_VREF_SHIFT)) + control = STAC_CTL_WIDGET_DC_BIAS; + else if (nid == spec->mic_switch) + control = STAC_CTL_WIDGET_IO_SWITCH; + } + + if (control) { + strcpy(name, auto_pin_cfg_labels[idx]); + return stac92xx_add_control(codec->spec, control, + strcat(name, " Jack Mode"), nid); + } + + return 0; +} + static int stac92xx_add_input_source(struct sigmatel_spec *spec) { struct snd_kcontrol_new *knew; @@ -3144,7 +3321,9 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg) { struct sigmatel_spec *spec = codec->spec; + hda_nid_t nid; int err; + int idx; err = create_multi_out_ctls(codec, cfg->line_outs, cfg->line_out_pins, spec->multiout.dac_nids, @@ -3161,20 +3340,13 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, return err; } - if (spec->line_switch) { - err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH, - "Line In as Output Switch", - spec->line_switch << 8); - if (err < 0) - return err; - } - - if (spec->mic_switch) { - err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH, - "Mic as Output Switch", - (spec->mic_switch << 8) | 1); - if (err < 0) - return err; + for (idx = AUTO_PIN_MIC; idx <= AUTO_PIN_FRONT_LINE; idx++) { + nid = cfg->input_pins[idx]; + if (nid) { + err = stac92xx_add_jack_mode_control(codec, nid, idx); + if (err < 0) + return err; + } } return 0; @@ -3639,6 +3811,8 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = snd_hda_attach_beep_device(codec, nid); if (err < 0) return err; + /* IDT/STAC codecs have linear beep tone parameter */ + codec->beep->linear_tone = 1; /* if no beep switch is available, make its own one */ caps = query_amp_caps(codec, nid, HDA_OUTPUT); if (codec->beep && @@ -4082,7 +4256,7 @@ static int stac92xx_init(struct hda_codec *codec) unsigned int pinctl, conf; if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) { /* for mic pins, force to initialize */ - pinctl = stac92xx_get_vref(codec, nid); + pinctl = stac92xx_get_default_vref(codec, nid); pinctl |= AC_PINCTL_IN_EN; stac92xx_auto_set_pinctl(codec, nid, pinctl); } else { @@ -4535,17 +4709,19 @@ static int stac92xx_resume(struct hda_codec *codec) return 0; } - /* - * using power check for controlling mute led of HP HDX notebooks + * using power check for controlling mute led of HP notebooks * check for mute state only on Speakers (nid = 0x10) * * For this feature CONFIG_SND_HDA_POWER_SAVE is needed, otherwise * the LED is NOT working properly ! + * + * Changed name to reflect that it now works for any designated + * model, not just HP HDX. */ #ifdef CONFIG_SND_HDA_POWER_SAVE -static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec, +static int stac92xx_hp_check_power_status(struct hda_codec *codec, hda_nid_t nid) { struct sigmatel_spec *spec = codec->spec; @@ -4553,9 +4729,9 @@ static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec, if (nid == 0x10) { if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) & HDA_AMP_MUTE) - spec->gpio_data &= ~0x08; /* orange */ + spec->gpio_data &= ~spec->gpio_led; /* orange */ else - spec->gpio_data |= 0x08; /* white */ + spec->gpio_data |= spec->gpio_led; /* white */ stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, @@ -5201,6 +5377,15 @@ again: if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP) snd_hda_sequence_write_cache(codec, unmute_init); + /* Some HP machines seem to have unstable codec communications + * especially with ATI fglrx driver. For recovering from the + * CORB/RIRB stall, allow the BUS reset and keep always sync + */ + if (spec->board_config == STAC_HP_DV5) { + codec->bus->sync_write = 1; + codec->bus->allow_bus_reset = 1; + } + spec->aloopback_ctl = stac92hd71bxx_loopback; spec->aloopback_mask = 0x50; spec->aloopback_shift = 0; @@ -5234,6 +5419,15 @@ again: spec->num_smuxes = 0; spec->num_dmuxes = 1; break; + case STAC_HP_DV4_1222NR: + spec->num_dmics = 1; + /* I don't know if it needs 1 or 2 smuxes - will wait for + * bug reports to fix if needed + */ + spec->num_smuxes = 1; + spec->num_dmuxes = 1; + spec->gpio_led = 0x01; + /* fallthrough */ case STAC_HP_DV5: snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010); stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN); @@ -5242,22 +5436,21 @@ again: spec->num_dmics = 1; spec->num_dmuxes = 1; spec->num_smuxes = 1; - /* - * For controlling MUTE LED on HP HDX16/HDX18 notebooks, - * the CONFIG_SND_HDA_POWER_SAVE is needed to be set. - */ -#ifdef CONFIG_SND_HDA_POWER_SAVE /* orange/white mute led on GPIO3, orange=0, white=1 */ - spec->gpio_mask |= 0x08; - spec->gpio_dir |= 0x08; - spec->gpio_data |= 0x08; /* set to white */ + spec->gpio_led = 0x08; + break; + } +#ifdef CONFIG_SND_HDA_POWER_SAVE + if (spec->gpio_led) { + spec->gpio_mask |= spec->gpio_led; + spec->gpio_dir |= spec->gpio_led; + spec->gpio_data |= spec->gpio_led; /* register check_power_status callback. */ codec->patch_ops.check_power_status = - stac92xx_hp_hdx_check_power_status; + stac92xx_hp_check_power_status; + } #endif - break; - }; spec->multiout.dac_nids = spec->dac_nids; if (spec->dinput_mux) @@ -5282,7 +5475,7 @@ again: codec->proc_widget_hook = stac92hd7x_proc_hook; return 0; -}; +} static int patch_stac922x(struct hda_codec *codec) { @@ -5437,7 +5630,7 @@ static int patch_stac927x(struct hda_codec *codec) /* correct the device field to SPDIF out */ snd_hda_codec_set_pincfg(codec, 0x21, 0x01442070); break; - }; + } /* configure the analog microphone on some laptops */ snd_hda_codec_set_pincfg(codec, 0x0c, 0x90a79130); /* correct the front output jack as a hp out */ @@ -5747,6 +5940,7 @@ static struct hda_codec_preset snd_hda_preset_sigmatel[] = { { .id = 0x83847661, .name = "CXD9872RD/K", .patch = patch_stac9872 }, { .id = 0x83847662, .name = "STAC9872AK", .patch = patch_stac9872 }, { .id = 0x83847664, .name = "CXD9872AKD", .patch = patch_stac9872 }, + { .id = 0x83847698, .name = "STAC9205", .patch = patch_stac9205 }, { .id = 0x838476a0, .name = "STAC9205", .patch = patch_stac9205 }, { .id = 0x838476a1, .name = "STAC9205D", .patch = patch_stac9205 }, { .id = 0x838476a2, .name = "STAC9204", .patch = patch_stac9205 }, diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index b25a5cc..8e004fb 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -205,7 +205,7 @@ struct via_spec { /* playback */ struct hda_multi_out multiout; - hda_nid_t extra_dig_out_nid; + hda_nid_t slave_dig_outs[2]; /* capture */ unsigned int num_adc_nids; @@ -731,21 +731,6 @@ static int via_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, return snd_hda_multi_out_dig_close(codec, &spec->multiout); } -/* setup SPDIF output stream */ -static void setup_dig_playback_stream(struct hda_codec *codec, hda_nid_t nid, - unsigned int stream_tag, unsigned int format) -{ - /* turn off SPDIF once; otherwise the IEC958 bits won't be updated */ - if (codec->spdif_ctls & AC_DIG1_ENABLE) - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, - codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff); - snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format); - /* turn on again (if needed) */ - if (codec->spdif_ctls & AC_DIG1_ENABLE) - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, - codec->spdif_ctls & 0xff); -} - static int via_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct hda_codec *codec, unsigned int stream_tag, @@ -753,19 +738,16 @@ static int via_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) { struct via_spec *spec = codec->spec; - hda_nid_t nid; - - /* 1st or 2nd S/PDIF */ - if (substream->number == 0) - nid = spec->multiout.dig_out_nid; - else if (substream->number == 1) - nid = spec->extra_dig_out_nid; - else - return -1; + return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, + stream_tag, format, substream); +} - mutex_lock(&codec->spdif_mutex); - setup_dig_playback_stream(codec, nid, stream_tag, format); - mutex_unlock(&codec->spdif_mutex); +static int via_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct via_spec *spec = codec->spec; + snd_hda_multi_out_dig_cleanup(codec, &spec->multiout); return 0; } @@ -842,7 +824,8 @@ static struct hda_pcm_stream vt1708_pcm_digital_playback = { .ops = { .open = via_dig_playback_pcm_open, .close = via_dig_playback_pcm_close, - .prepare = via_dig_playback_pcm_prepare + .prepare = via_dig_playback_pcm_prepare, + .cleanup = via_dig_playback_pcm_cleanup }, }; @@ -874,13 +857,6 @@ static int via_build_controls(struct hda_codec *codec) if (err < 0) return err; spec->multiout.share_spdif = 1; - - if (spec->extra_dig_out_nid) { - err = snd_hda_create_spdif_out_ctls(codec, - spec->extra_dig_out_nid); - if (err < 0) - return err; - } } if (spec->dig_in_nid) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid); @@ -1013,10 +989,6 @@ static void via_unsol_event(struct hda_codec *codec, via_gpio_control(codec); } -static hda_nid_t slave_dig_outs[] = { - 0, -}; - static int via_init(struct hda_codec *codec) { struct via_spec *spec = codec->spec; @@ -1051,8 +1023,9 @@ static int via_init(struct hda_codec *codec) snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN); - /* no slave outs */ - codec->slave_dig_outs = slave_dig_outs; + /* assign slave outs */ + if (spec->slave_dig_outs[0]) + codec->slave_dig_outs = spec->slave_dig_outs; return 0; } @@ -2134,7 +2107,8 @@ static struct hda_pcm_stream vt1708B_pcm_digital_playback = { .ops = { .open = via_dig_playback_pcm_open, .close = via_dig_playback_pcm_close, - .prepare = via_dig_playback_pcm_prepare + .prepare = via_dig_playback_pcm_prepare, + .cleanup = via_dig_playback_pcm_cleanup }, }; @@ -2589,14 +2563,15 @@ static struct hda_pcm_stream vt1708S_pcm_analog_capture = { }; static struct hda_pcm_stream vt1708S_pcm_digital_playback = { - .substreams = 2, + .substreams = 1, .channels_min = 2, .channels_max = 2, /* NID is set in via_build_pcms */ .ops = { .open = via_dig_playback_pcm_open, .close = via_dig_playback_pcm_close, - .prepare = via_dig_playback_pcm_prepare + .prepare = via_dig_playback_pcm_prepare, + .cleanup = via_dig_playback_pcm_cleanup }, }; @@ -2805,14 +2780,37 @@ static int vt1708S_auto_create_analog_input_ctls(struct via_spec *spec, return 0; } +/* fill out digital output widgets; one for master and one for slave outputs */ +static void fill_dig_outs(struct hda_codec *codec) +{ + struct via_spec *spec = codec->spec; + int i; + + for (i = 0; i < spec->autocfg.dig_outs; i++) { + hda_nid_t nid; + int conn; + + nid = spec->autocfg.dig_out_pins[i]; + if (!nid) + continue; + conn = snd_hda_get_connections(codec, nid, &nid, 1); + if (conn < 1) + continue; + if (!spec->multiout.dig_out_nid) + spec->multiout.dig_out_nid = nid; + else { + spec->slave_dig_outs[0] = nid; + break; /* at most two dig outs */ + } + } +} + static int vt1708S_parse_auto_config(struct hda_codec *codec) { struct via_spec *spec = codec->spec; int err; - static hda_nid_t vt1708s_ignore[] = {0x21, 0}; - err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, - vt1708s_ignore); + err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL); if (err < 0) return err; err = vt1708S_auto_fill_dac_nids(spec, &spec->autocfg); @@ -2833,10 +2831,7 @@ static int vt1708S_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_outs) - spec->multiout.dig_out_nid = VT1708S_DIGOUT_NID; - - spec->extra_dig_out_nid = 0x15; + fill_dig_outs(codec); if (spec->kctls.list) spec->mixers[spec->num_mixers++] = spec->kctls.list; @@ -3000,7 +2995,8 @@ static struct hda_pcm_stream vt1702_pcm_digital_playback = { .ops = { .open = via_dig_playback_pcm_open, .close = via_dig_playback_pcm_close, - .prepare = via_dig_playback_pcm_prepare + .prepare = via_dig_playback_pcm_prepare, + .cleanup = via_dig_playback_pcm_cleanup }, }; @@ -3128,10 +3124,8 @@ static int vt1702_parse_auto_config(struct hda_codec *codec) { struct via_spec *spec = codec->spec; int err; - static hda_nid_t vt1702_ignore[] = {0x1C, 0}; - err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, - vt1702_ignore); + err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL); if (err < 0) return err; err = vt1702_auto_fill_dac_nids(spec, &spec->autocfg); @@ -3152,10 +3146,7 @@ static int vt1702_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_outs) - spec->multiout.dig_out_nid = VT1702_DIGOUT_NID; - - spec->extra_dig_out_nid = 0x1B; + fill_dig_outs(codec); if (spec->kctls.list) spec->mixers[spec->num_mixers++] = spec->kctls.list; diff --git a/sound/pci/ice1712/Makefile b/sound/pci/ice1712/Makefile index f99fe08..536eae2 100644 --- a/sound/pci/ice1712/Makefile +++ b/sound/pci/ice1712/Makefile @@ -5,7 +5,7 @@ snd-ice17xx-ak4xxx-objs := ak4xxx.o snd-ice1712-objs := ice1712.o delta.o hoontech.o ews.o -snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o +snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o # Toplevel Module Dependency obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o snd-ice17xx-ak4xxx.o diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h index fdae6de..adc909e 100644 --- a/sound/pci/ice1712/ice1712.h +++ b/sound/pci/ice1712/ice1712.h @@ -335,6 +335,7 @@ struct snd_ice1712 { unsigned int force_rdma1:1; /* VT1720/4 - RDMA1 as non-spdif */ unsigned int midi_output:1; /* VT1720/4: MIDI output triggered */ unsigned int midi_input:1; /* VT1720/4: MIDI input triggered */ + unsigned int own_routing:1; /* VT1720/4: use own routing ctls */ unsigned int num_total_dacs; /* total DACs */ unsigned int num_total_adcs; /* total ADCs */ unsigned int cur_rate; /* current rate */ @@ -458,10 +459,17 @@ static inline int snd_ice1712_gpio_read_bits(struct snd_ice1712 *ice, return snd_ice1712_gpio_read(ice) & mask; } +/* route access functions */ +int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift); +int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val, + int shift); + int snd_ice1712_spdif_build_controls(struct snd_ice1712 *ice); -int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak, const struct snd_akm4xxx *template, - const struct snd_ak4xxx_private *priv, struct snd_ice1712 *ice); +int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak, + const struct snd_akm4xxx *template, + const struct snd_ak4xxx_private *priv, + struct snd_ice1712 *ice); void snd_ice1712_akm4xxx_free(struct snd_ice1712 *ice); int snd_ice1712_akm4xxx_build_controls(struct snd_ice1712 *ice); diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 128510e..36ade77 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -49,6 +49,7 @@ #include "prodigy192.h" #include "prodigy_hifi.h" #include "juli.h" +#include "maya44.h" #include "phase.h" #include "wtm.h" #include "se.h" @@ -65,6 +66,7 @@ MODULE_SUPPORTED_DEVICE("{" PRODIGY192_DEVICE_DESC PRODIGY_HIFI_DEVICE_DESC JULI_DEVICE_DESC + MAYA44_DEVICE_DESC PHASE_DEVICE_DESC WTM_DEVICE_DESC SE_DEVICE_DESC @@ -626,7 +628,7 @@ static unsigned char stdclock_set_mclk(struct snd_ice1712 *ice, return 0; } -static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate, +static int snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate, int force) { unsigned long flags; @@ -634,17 +636,18 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate, unsigned int i, old_rate; if (rate > ice->hw_rates->list[ice->hw_rates->count - 1]) - return; + return -EINVAL; + spin_lock_irqsave(&ice->reg_lock, flags); if ((inb(ICEMT1724(ice, DMA_CONTROL)) & DMA_STARTS) || (inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) { /* running? we cannot change the rate now... */ spin_unlock_irqrestore(&ice->reg_lock, flags); - return; + return -EBUSY; } if (!force && is_pro_rate_locked(ice)) { spin_unlock_irqrestore(&ice->reg_lock, flags); - return; + return (rate == ice->cur_rate) ? 0 : -EBUSY; } old_rate = ice->get_rate(ice); @@ -652,7 +655,7 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate, ice->set_rate(ice, rate); else if (rate == ice->cur_rate) { spin_unlock_irqrestore(&ice->reg_lock, flags); - return; + return 0; } ice->cur_rate = rate; @@ -674,13 +677,15 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate, } if (ice->spdif.ops.setup_rate) ice->spdif.ops.setup_rate(ice, rate); + + return 0; } static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_ice1712 *ice = snd_pcm_substream_chip(substream); - int i, chs; + int i, chs, err; chs = params_channels(hw_params); mutex_lock(&ice->open_mutex); @@ -715,7 +720,11 @@ static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream, } } mutex_unlock(&ice->open_mutex); - snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0); + + err = snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0); + if (err < 0) + return err; + return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); } @@ -848,20 +857,39 @@ static snd_pcm_uframes_t snd_vt1724_pcm_pointer(struct snd_pcm_substream *substr #endif } -static const struct vt1724_pcm_reg vt1724_playback_pro_reg = { +static const struct vt1724_pcm_reg vt1724_pdma0_reg = { .addr = VT1724_MT_PLAYBACK_ADDR, .size = VT1724_MT_PLAYBACK_SIZE, .count = VT1724_MT_PLAYBACK_COUNT, .start = VT1724_PDMA0_START, }; -static const struct vt1724_pcm_reg vt1724_capture_pro_reg = { +static const struct vt1724_pcm_reg vt1724_pdma4_reg = { + .addr = VT1724_MT_PDMA4_ADDR, + .size = VT1724_MT_PDMA4_SIZE, + .count = VT1724_MT_PDMA4_COUNT, + .start = VT1724_PDMA4_START, +}; + +static const struct vt1724_pcm_reg vt1724_rdma0_reg = { .addr = VT1724_MT_CAPTURE_ADDR, .size = VT1724_MT_CAPTURE_SIZE, .count = VT1724_MT_CAPTURE_COUNT, .start = VT1724_RDMA0_START, }; +static const struct vt1724_pcm_reg vt1724_rdma1_reg = { + .addr = VT1724_MT_RDMA1_ADDR, + .size = VT1724_MT_RDMA1_SIZE, + .count = VT1724_MT_RDMA1_COUNT, + .start = VT1724_RDMA1_START, +}; + +#define vt1724_playback_pro_reg vt1724_pdma0_reg +#define vt1724_playback_spdif_reg vt1724_pdma4_reg +#define vt1724_capture_pro_reg vt1724_rdma0_reg +#define vt1724_capture_spdif_reg vt1724_rdma1_reg + static const struct snd_pcm_hardware snd_vt1724_playback_pro = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | @@ -1077,20 +1105,6 @@ static int __devinit snd_vt1724_pcm_profi(struct snd_ice1712 *ice, int device) * SPDIF PCM */ -static const struct vt1724_pcm_reg vt1724_playback_spdif_reg = { - .addr = VT1724_MT_PDMA4_ADDR, - .size = VT1724_MT_PDMA4_SIZE, - .count = VT1724_MT_PDMA4_COUNT, - .start = VT1724_PDMA4_START, -}; - -static const struct vt1724_pcm_reg vt1724_capture_spdif_reg = { - .addr = VT1724_MT_RDMA1_ADDR, - .size = VT1724_MT_RDMA1_SIZE, - .count = VT1724_MT_RDMA1_COUNT, - .start = VT1724_RDMA1_START, -}; - /* update spdif control bits; call with reg_lock */ static void update_spdif_bits(struct snd_ice1712 *ice, unsigned int val) { @@ -1963,7 +1977,7 @@ static inline int digital_route_shift(int idx) return idx * 3; } -static int get_route_val(struct snd_ice1712 *ice, int shift) +int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift) { unsigned long val; unsigned char eitem; @@ -1982,7 +1996,8 @@ static int get_route_val(struct snd_ice1712 *ice, int shift) return eitem; } -static int put_route_val(struct snd_ice1712 *ice, unsigned int val, int shift) +int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val, + int shift) { unsigned int old_val, nval; int change; @@ -2010,7 +2025,7 @@ static int snd_vt1724_pro_route_analog_get(struct snd_kcontrol *kcontrol, struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); ucontrol->value.enumerated.item[0] = - get_route_val(ice, analog_route_shift(idx)); + snd_ice1724_get_route_val(ice, analog_route_shift(idx)); return 0; } @@ -2019,8 +2034,9 @@ static int snd_vt1724_pro_route_analog_put(struct snd_kcontrol *kcontrol, { struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); - return put_route_val(ice, ucontrol->value.enumerated.item[0], - analog_route_shift(idx)); + return snd_ice1724_put_route_val(ice, + ucontrol->value.enumerated.item[0], + analog_route_shift(idx)); } static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol, @@ -2029,7 +2045,7 @@ static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol, struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); ucontrol->value.enumerated.item[0] = - get_route_val(ice, digital_route_shift(idx)); + snd_ice1724_get_route_val(ice, digital_route_shift(idx)); return 0; } @@ -2038,11 +2054,13 @@ static int snd_vt1724_pro_route_spdif_put(struct snd_kcontrol *kcontrol, { struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); - return put_route_val(ice, ucontrol->value.enumerated.item[0], - digital_route_shift(idx)); + return snd_ice1724_put_route_val(ice, + ucontrol->value.enumerated.item[0], + digital_route_shift(idx)); } -static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata = { +static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata = +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "H/W Playback Route", .info = snd_vt1724_pro_route_info, @@ -2109,6 +2127,7 @@ static struct snd_ice1712_card_info *card_tables[] __devinitdata = { snd_vt1724_prodigy_hifi_cards, snd_vt1724_prodigy192_cards, snd_vt1724_juli_cards, + snd_vt1724_maya44_cards, snd_vt1724_phase_cards, snd_vt1724_wtm_cards, snd_vt1724_se_cards, @@ -2246,8 +2265,10 @@ static int __devinit snd_vt1724_read_eeprom(struct snd_ice1712 *ice, static void __devinit snd_vt1724_chip_reset(struct snd_ice1712 *ice) { outb(VT1724_RESET , ICEREG1724(ice, CONTROL)); + inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */ msleep(10); outb(0, ICEREG1724(ice, CONTROL)); + inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */ msleep(10); } @@ -2277,9 +2298,12 @@ static int __devinit snd_vt1724_spdif_build_controls(struct snd_ice1712 *ice) if (snd_BUG_ON(!ice->pcm)) return -EIO; - err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice)); - if (err < 0) - return err; + if (!ice->own_routing) { + err = snd_ctl_add(ice->card, + snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice)); + if (err < 0) + return err; + } err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_spdif_switch, ice)); if (err < 0) @@ -2326,7 +2350,7 @@ static int __devinit snd_vt1724_build_controls(struct snd_ice1712 *ice) if (err < 0) return err; - if (ice->num_total_dacs > 0) { + if (!ice->own_routing && ice->num_total_dacs > 0) { struct snd_kcontrol_new tmp = snd_vt1724_mixer_pro_analog_route; tmp.count = ice->num_total_dacs; if (ice->vt1720 && tmp.count > 2) diff --git a/sound/pci/ice1712/maya44.c b/sound/pci/ice1712/maya44.c new file mode 100644 index 0000000..3e1c20a --- /dev/null +++ b/sound/pci/ice1712/maya44.c @@ -0,0 +1,779 @@ +/* + * ALSA driver for ICEnsemble VT1724 (Envy24HT) + * + * Lowlevel functions for ESI Maya44 cards + * + * Copyright (c) 2009 Takashi Iwai + * Based on the patches by Rainer Zimmermann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "ice1712.h" +#include "envy24ht.h" +#include "maya44.h" + +/* WM8776 register indexes */ +#define WM8776_REG_HEADPHONE_L 0x00 +#define WM8776_REG_HEADPHONE_R 0x01 +#define WM8776_REG_HEADPHONE_MASTER 0x02 +#define WM8776_REG_DAC_ATTEN_L 0x03 +#define WM8776_REG_DAC_ATTEN_R 0x04 +#define WM8776_REG_DAC_ATTEN_MASTER 0x05 +#define WM8776_REG_DAC_PHASE 0x06 +#define WM8776_REG_DAC_CONTROL 0x07 +#define WM8776_REG_DAC_MUTE 0x08 +#define WM8776_REG_DAC_DEEMPH 0x09 +#define WM8776_REG_DAC_IF_CONTROL 0x0a +#define WM8776_REG_ADC_IF_CONTROL 0x0b +#define WM8776_REG_MASTER_MODE_CONTROL 0x0c +#define WM8776_REG_POWERDOWN 0x0d +#define WM8776_REG_ADC_ATTEN_L 0x0e +#define WM8776_REG_ADC_ATTEN_R 0x0f +#define WM8776_REG_ADC_ALC1 0x10 +#define WM8776_REG_ADC_ALC2 0x11 +#define WM8776_REG_ADC_ALC3 0x12 +#define WM8776_REG_ADC_NOISE_GATE 0x13 +#define WM8776_REG_ADC_LIMITER 0x14 +#define WM8776_REG_ADC_MUX 0x15 +#define WM8776_REG_OUTPUT_MUX 0x16 +#define WM8776_REG_RESET 0x17 + +#define WM8776_NUM_REGS 0x18 + +/* clock ratio identifiers for snd_wm8776_set_rate() */ +#define WM8776_CLOCK_RATIO_128FS 0 +#define WM8776_CLOCK_RATIO_192FS 1 +#define WM8776_CLOCK_RATIO_256FS 2 +#define WM8776_CLOCK_RATIO_384FS 3 +#define WM8776_CLOCK_RATIO_512FS 4 +#define WM8776_CLOCK_RATIO_768FS 5 + +enum { WM_VOL_HP, WM_VOL_DAC, WM_VOL_ADC, WM_NUM_VOLS }; +enum { WM_SW_DAC, WM_SW_BYPASS, WM_NUM_SWITCHES }; + +struct snd_wm8776 { + unsigned char addr; + unsigned short regs[WM8776_NUM_REGS]; + unsigned char volumes[WM_NUM_VOLS][2]; + unsigned int switch_bits; +}; + +struct snd_maya44 { + struct snd_ice1712 *ice; + struct snd_wm8776 wm[2]; + struct mutex mutex; +}; + + +/* write the given register and save the data to the cache */ +static void wm8776_write(struct snd_ice1712 *ice, struct snd_wm8776 *wm, + unsigned char reg, unsigned short val) +{ + /* + * WM8776 registers are up to 9 bits wide, bit 8 is placed in the LSB + * of the address field + */ + snd_vt1724_write_i2c(ice, wm->addr, + (reg << 1) | ((val >> 8) & 1), + val & 0xff); + wm->regs[reg] = val; +} + +/* + * update the given register with and/or mask and save the data to the cache + */ +static int wm8776_write_bits(struct snd_ice1712 *ice, struct snd_wm8776 *wm, + unsigned char reg, + unsigned short mask, unsigned short val) +{ + val |= wm->regs[reg] & ~mask; + if (val != wm->regs[reg]) { + wm8776_write(ice, wm, reg, val); + return 1; + } + return 0; +} + + +/* + * WM8776 volume controls + */ + +struct maya_vol_info { + unsigned int maxval; /* volume range: 0..maxval */ + unsigned char regs[2]; /* left and right registers */ + unsigned short mask; /* value mask */ + unsigned short offset; /* zero-value offset */ + unsigned short mute; /* mute bit */ + unsigned short update; /* update bits */ + unsigned char mux_bits[2]; /* extra bits for ADC mute */ +}; + +static struct maya_vol_info vol_info[WM_NUM_VOLS] = { + [WM_VOL_HP] = { + .maxval = 80, + .regs = { WM8776_REG_HEADPHONE_L, WM8776_REG_HEADPHONE_R }, + .mask = 0x7f, + .offset = 0x30, + .mute = 0x00, + .update = 0x180, /* update and zero-cross enable */ + }, + [WM_VOL_DAC] = { + .maxval = 255, + .regs = { WM8776_REG_DAC_ATTEN_L, WM8776_REG_DAC_ATTEN_R }, + .mask = 0xff, + .offset = 0x01, + .mute = 0x00, + .update = 0x100, /* zero-cross enable */ + }, + [WM_VOL_ADC] = { + .maxval = 91, + .regs = { WM8776_REG_ADC_ATTEN_L, WM8776_REG_ADC_ATTEN_R }, + .mask = 0xff, + .offset = 0xa5, + .mute = 0xa5, + .update = 0x100, /* update */ + .mux_bits = { 0x80, 0x40 }, /* ADCMUX bits */ + }, +}; + +/* + * dB tables + */ +/* headphone output: mute, -73..+6db (1db step) */ +static const DECLARE_TLV_DB_SCALE(db_scale_hp, -7400, 100, 1); +/* DAC output: mute, -127..0db (0.5db step) */ +static const DECLARE_TLV_DB_SCALE(db_scale_dac, -12750, 50, 1); +/* ADC gain: mute, -21..+24db (0.5db step) */ +static const DECLARE_TLV_DB_SCALE(db_scale_adc, -2100, 50, 1); + +static int maya_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + unsigned int idx = kcontrol->private_value; + struct maya_vol_info *vol = &vol_info[idx]; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = vol->maxval; + return 0; +} + +static int maya_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + struct snd_wm8776 *wm = + &chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)]; + unsigned int idx = kcontrol->private_value; + + mutex_lock(&chip->mutex); + ucontrol->value.integer.value[0] = wm->volumes[idx][0]; + ucontrol->value.integer.value[1] = wm->volumes[idx][1]; + mutex_unlock(&chip->mutex); + return 0; +} + +static int maya_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + struct snd_wm8776 *wm = + &chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)]; + unsigned int idx = kcontrol->private_value; + struct maya_vol_info *vol = &vol_info[idx]; + unsigned int val, data; + int ch, changed = 0; + + mutex_lock(&chip->mutex); + for (ch = 0; ch < 2; ch++) { + val = ucontrol->value.integer.value[ch]; + if (val > vol->maxval) + val = vol->maxval; + if (val == wm->volumes[idx][ch]) + continue; + if (!val) + data = vol->mute; + else + data = (val - 1) + vol->offset; + data |= vol->update; + changed |= wm8776_write_bits(chip->ice, wm, vol->regs[ch], + vol->mask | vol->update, data); + if (vol->mux_bits[ch]) + wm8776_write_bits(chip->ice, wm, WM8776_REG_ADC_MUX, + vol->mux_bits[ch], + val ? 0 : vol->mux_bits[ch]); + wm->volumes[idx][ch] = val; + } + mutex_unlock(&chip->mutex); + return changed; +} + +/* + * WM8776 switch controls + */ + +#define COMPOSE_SW_VAL(idx, reg, mask) ((idx) | ((reg) << 8) | ((mask) << 16)) +#define GET_SW_VAL_IDX(val) ((val) & 0xff) +#define GET_SW_VAL_REG(val) (((val) >> 8) & 0xff) +#define GET_SW_VAL_MASK(val) (((val) >> 16) & 0xff) + +#define maya_sw_info snd_ctl_boolean_mono_info + +static int maya_sw_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + struct snd_wm8776 *wm = + &chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)]; + unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value); + + ucontrol->value.integer.value[0] = (wm->switch_bits >> idx) & 1; + return 0; +} + +static int maya_sw_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + struct snd_wm8776 *wm = + &chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)]; + unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value); + unsigned int mask, val; + int changed; + + mutex_lock(&chip->mutex); + mask = 1 << idx; + wm->switch_bits &= ~mask; + val = ucontrol->value.integer.value[0]; + if (val) + wm->switch_bits |= mask; + mask = GET_SW_VAL_MASK(kcontrol->private_value); + changed = wm8776_write_bits(chip->ice, wm, + GET_SW_VAL_REG(kcontrol->private_value), + mask, val ? mask : 0); + mutex_unlock(&chip->mutex); + return changed; +} + +/* + * GPIO pins (known ones for maya44) + */ +#define GPIO_PHANTOM_OFF 2 +#define GPIO_MIC_RELAY 4 +#define GPIO_SPDIF_IN_INV 5 +#define GPIO_MUST_BE_0 7 + +/* + * GPIO switch controls + */ + +#define COMPOSE_GPIO_VAL(shift, inv) ((shift) | ((inv) << 8)) +#define GET_GPIO_VAL_SHIFT(val) ((val) & 0xff) +#define GET_GPIO_VAL_INV(val) (((val) >> 8) & 1) + +static int maya_set_gpio_bits(struct snd_ice1712 *ice, unsigned int mask, + unsigned int bits) +{ + unsigned int data; + data = snd_ice1712_gpio_read(ice); + if ((data & mask) == bits) + return 0; + snd_ice1712_gpio_write(ice, (data & ~mask) | bits); + return 1; +} + +#define maya_gpio_sw_info snd_ctl_boolean_mono_info + +static int maya_gpio_sw_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value); + unsigned int val; + + val = (snd_ice1712_gpio_read(chip->ice) >> shift) & 1; + if (GET_GPIO_VAL_INV(kcontrol->private_value)) + val = !val; + ucontrol->value.integer.value[0] = val; + return 0; +} + +static int maya_gpio_sw_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value); + unsigned int val, mask; + int changed; + + mutex_lock(&chip->mutex); + mask = 1 << shift; + val = ucontrol->value.integer.value[0]; + if (GET_GPIO_VAL_INV(kcontrol->private_value)) + val = !val; + val = val ? mask : 0; + changed = maya_set_gpio_bits(chip->ice, mask, val); + mutex_unlock(&chip->mutex); + return changed; +} + +/* + * capture source selection + */ + +/* known working input slots (0-4) */ +#define MAYA_LINE_IN 1 /* in-2 */ +#define MAYA_MIC_IN 4 /* in-5 */ + +static void wm8776_select_input(struct snd_maya44 *chip, int idx, int line) +{ + wm8776_write_bits(chip->ice, &chip->wm[idx], WM8776_REG_ADC_MUX, + 0x1f, 1 << line); +} + +static int maya_rec_src_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[] = { "Line", "Mic" }; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = ARRAY_SIZE(texts); + if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) + uinfo->value.enumerated.item = + uinfo->value.enumerated.items - 1; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; +} + +static int maya_rec_src_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + int sel; + + if (snd_ice1712_gpio_read(chip->ice) & (1 << GPIO_MIC_RELAY)) + sel = 1; + else + sel = 0; + ucontrol->value.enumerated.item[0] = sel; + return 0; +} + +static int maya_rec_src_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + int sel = ucontrol->value.enumerated.item[0]; + int changed; + + mutex_lock(&chip->mutex); + changed = maya_set_gpio_bits(chip->ice, GPIO_MIC_RELAY, + sel ? GPIO_MIC_RELAY : 0); + wm8776_select_input(chip, 0, sel ? MAYA_MIC_IN : MAYA_LINE_IN); + mutex_unlock(&chip->mutex); + return changed; +} + +/* + * Maya44 routing switch settings have different meanings than the standard + * ice1724 switches as defined in snd_vt1724_pro_route_info (ice1724.c). + */ +static int maya_pb_route_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[] = { + "PCM Out", /* 0 */ + "Input 1", "Input 2", "Input 3", "Input 4" + }; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = ARRAY_SIZE(texts); + if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) + uinfo->value.enumerated.item = + uinfo->value.enumerated.items - 1; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; +} + +static int maya_pb_route_shift(int idx) +{ + static const unsigned char shift[10] = + { 8, 20, 0, 3, 11, 23, 14, 26, 17, 29 }; + return shift[idx % 10]; +} + +static int maya_pb_route_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); + ucontrol->value.enumerated.item[0] = + snd_ice1724_get_route_val(chip->ice, maya_pb_route_shift(idx)); + return 0; +} + +static int maya_pb_route_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); + int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); + return snd_ice1724_put_route_val(chip->ice, + ucontrol->value.enumerated.item[0], + maya_pb_route_shift(idx)); +} + + +/* + * controls to be added + */ + +static struct snd_kcontrol_new maya_controls[] __devinitdata = { + { + .name = "Crossmix Playback Volume", + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = maya_vol_info, + .get = maya_vol_get, + .put = maya_vol_put, + .tlv = { .p = db_scale_hp }, + .private_value = WM_VOL_HP, + .count = 2, + }, + { + .name = "PCM Playback Volume", + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = maya_vol_info, + .get = maya_vol_get, + .put = maya_vol_put, + .tlv = { .p = db_scale_dac }, + .private_value = WM_VOL_DAC, + .count = 2, + }, + { + .name = "Line Capture Volume", + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = maya_vol_info, + .get = maya_vol_get, + .put = maya_vol_put, + .tlv = { .p = db_scale_adc }, + .private_value = WM_VOL_ADC, + .count = 2, + }, + { + .name = "PCM Playback Switch", + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = maya_sw_info, + .get = maya_sw_get, + .put = maya_sw_put, + .private_value = COMPOSE_SW_VAL(WM_SW_DAC, + WM8776_REG_OUTPUT_MUX, 0x01), + .count = 2, + }, + { + .name = "Bypass Playback Switch", + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = maya_sw_info, + .get = maya_sw_get, + .put = maya_sw_put, + .private_value = COMPOSE_SW_VAL(WM_SW_BYPASS, + WM8776_REG_OUTPUT_MUX, 0x04), + .count = 2, + }, + { + .name = "Capture Source", + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = maya_rec_src_info, + .get = maya_rec_src_get, + .put = maya_rec_src_put, + }, + { + .name = "Mic Phantom Power Switch", + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = maya_gpio_sw_info, + .get = maya_gpio_sw_get, + .put = maya_gpio_sw_put, + .private_value = COMPOSE_GPIO_VAL(GPIO_PHANTOM_OFF, 1), + }, + { + .name = "SPDIF Capture Switch", + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = maya_gpio_sw_info, + .get = maya_gpio_sw_get, + .put = maya_gpio_sw_put, + .private_value = COMPOSE_GPIO_VAL(GPIO_SPDIF_IN_INV, 1), + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "H/W Playback Route", + .info = maya_pb_route_info, + .get = maya_pb_route_get, + .put = maya_pb_route_put, + .count = 4, /* FIXME: do controls 5-9 have any meaning? */ + }, +}; + +static int __devinit maya44_add_controls(struct snd_ice1712 *ice) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(maya_controls); i++) { + err = snd_ctl_add(ice->card, snd_ctl_new1(&maya_controls[i], + ice->spec)); + if (err < 0) + return err; + } + return 0; +} + + +/* + * initialize a wm8776 chip + */ +static void __devinit wm8776_init(struct snd_ice1712 *ice, + struct snd_wm8776 *wm, unsigned int addr) +{ + static const unsigned short inits_wm8776[] = { + 0x02, 0x100, /* R2: headphone L+R muted + update */ + 0x05, 0x100, /* R5: DAC output L+R muted + update */ + 0x06, 0x000, /* R6: DAC output phase normal */ + 0x07, 0x091, /* R7: DAC enable zero cross detection, + normal output */ + 0x08, 0x000, /* R8: DAC soft mute off */ + 0x09, 0x000, /* R9: no deemph, DAC zero detect disabled */ + 0x0a, 0x022, /* R10: DAC I2C mode, std polarities, 24bit */ + 0x0b, 0x022, /* R11: ADC I2C mode, std polarities, 24bit, + highpass filter enabled */ + 0x0c, 0x042, /* R12: ADC+DAC slave, ADC+DAC 44,1kHz */ + 0x0d, 0x000, /* R13: all power up */ + 0x0e, 0x100, /* R14: ADC left muted, + enable zero cross detection */ + 0x0f, 0x100, /* R15: ADC right muted, + enable zero cross detection */ + /* R16: ALC...*/ + 0x11, 0x000, /* R17: disable ALC */ + /* R18: ALC...*/ + /* R19: noise gate...*/ + 0x15, 0x000, /* R21: ADC input mux init, mute all inputs */ + 0x16, 0x001, /* R22: output mux, select DAC */ + 0xff, 0xff + }; + + const unsigned short *ptr; + unsigned char reg; + unsigned short data; + + wm->addr = addr; + /* enable DAC output; mute bypass, aux & all inputs */ + wm->switch_bits = (1 << WM_SW_DAC); + + ptr = inits_wm8776; + while (*ptr != 0xff) { + reg = *ptr++; + data = *ptr++; + wm8776_write(ice, wm, reg, data); + } +} + + +/* + * change the rate on the WM8776 codecs. + * this assumes that the VT17xx's rate is changed by the calling function. + * NOTE: even though the WM8776's are running in slave mode and rate + * selection is automatic, we need to call snd_wm8776_set_rate() here + * to make sure some flags are set correctly. + */ +static void set_rate(struct snd_ice1712 *ice, unsigned int rate) +{ + struct snd_maya44 *chip = ice->spec; + unsigned int ratio, adc_ratio, val; + int i; + + switch (rate) { + case 192000: + ratio = WM8776_CLOCK_RATIO_128FS; + break; + case 176400: + ratio = WM8776_CLOCK_RATIO_128FS; + break; + case 96000: + ratio = WM8776_CLOCK_RATIO_256FS; + break; + case 88200: + ratio = WM8776_CLOCK_RATIO_384FS; + break; + case 48000: + ratio = WM8776_CLOCK_RATIO_512FS; + break; + case 44100: + ratio = WM8776_CLOCK_RATIO_512FS; + break; + case 32000: + ratio = WM8776_CLOCK_RATIO_768FS; + break; + case 0: + /* no hint - S/PDIF input is master, simply return */ + return; + default: + snd_BUG(); + return; + } + + /* + * this currently sets the same rate for ADC and DAC, but limits + * ADC rate to 256X (96kHz). For 256X mode (96kHz), this sets ADC + * oversampling to 64x, as recommended by WM8776 datasheet. + * Setting the rate is not really necessary in slave mode. + */ + adc_ratio = ratio; + if (adc_ratio < WM8776_CLOCK_RATIO_256FS) + adc_ratio = WM8776_CLOCK_RATIO_256FS; + + val = adc_ratio; + if (adc_ratio == WM8776_CLOCK_RATIO_256FS) + val |= 8; + val |= ratio << 4; + + mutex_lock(&chip->mutex); + for (i = 0; i < 2; i++) + wm8776_write_bits(ice, &chip->wm[i], + WM8776_REG_MASTER_MODE_CONTROL, + 0x180, val); + mutex_unlock(&chip->mutex); +} + +/* + * supported sample rates (to override the default one) + */ + +static unsigned int rates[] = { + 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000 +}; + +/* playback rates: 32..192 kHz */ +static struct snd_pcm_hw_constraint_list dac_rates = { + .count = ARRAY_SIZE(rates), + .list = rates, + .mask = 0 +}; + + +/* + * chip addresses on I2C bus + */ +static unsigned char wm8776_addr[2] __devinitdata = { + 0x34, 0x36, /* codec 0 & 1 */ +}; + +/* + * initialize the chip + */ +static int __devinit maya44_init(struct snd_ice1712 *ice) +{ + int i; + struct snd_maya44 *chip; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + mutex_init(&chip->mutex); + chip->ice = ice; + ice->spec = chip; + + /* initialise codecs */ + ice->num_total_dacs = 4; + ice->num_total_adcs = 4; + ice->akm_codecs = 0; + + for (i = 0; i < 2; i++) { + wm8776_init(ice, &chip->wm[i], wm8776_addr[i]); + wm8776_select_input(chip, i, MAYA_LINE_IN); + } + + /* set card specific rates */ + ice->hw_rates = &dac_rates; + + /* register change rate notifier */ + ice->gpio.set_pro_rate = set_rate; + + /* RDMA1 (2nd input channel) is used for ADC by default */ + ice->force_rdma1 = 1; + + /* have an own routing control */ + ice->own_routing = 1; + + return 0; +} + + +/* + * Maya44 boards don't provide the EEPROM data except for the vendor IDs. + * hence the driver needs to sets up it properly. + */ + +static unsigned char maya44_eeprom[] __devinitdata = { + [ICE_EEP2_SYSCONF] = 0x45, + /* clock xin1=49.152MHz, mpu401, 2 stereo ADCs+DACs */ + [ICE_EEP2_ACLINK] = 0x80, + /* I2S */ + [ICE_EEP2_I2S] = 0xf8, + /* vol, 96k, 24bit, 192k */ + [ICE_EEP2_SPDIF] = 0xc3, + /* enable spdif out, spdif out supp, spdif-in, ext spdif out */ + [ICE_EEP2_GPIO_DIR] = 0xff, + [ICE_EEP2_GPIO_DIR1] = 0xff, + [ICE_EEP2_GPIO_DIR2] = 0xff, + [ICE_EEP2_GPIO_MASK] = 0/*0x9f*/, + [ICE_EEP2_GPIO_MASK1] = 0/*0xff*/, + [ICE_EEP2_GPIO_MASK2] = 0/*0x7f*/, + [ICE_EEP2_GPIO_STATE] = (1 << GPIO_PHANTOM_OFF) | + (1 << GPIO_SPDIF_IN_INV), + [ICE_EEP2_GPIO_STATE1] = 0x00, + [ICE_EEP2_GPIO_STATE2] = 0x00, +}; + +/* entry point */ +struct snd_ice1712_card_info snd_vt1724_maya44_cards[] __devinitdata = { + { + .subvendor = VT1724_SUBDEVICE_MAYA44, + .name = "ESI Maya44", + .model = "maya44", + .chip_init = maya44_init, + .build_controls = maya44_add_controls, + .eeprom_size = sizeof(maya44_eeprom), + .eeprom_data = maya44_eeprom, + }, + { } /* terminator */ +}; diff --git a/sound/pci/ice1712/maya44.h b/sound/pci/ice1712/maya44.h new file mode 100644 index 0000000..eafd03a --- /dev/null +++ b/sound/pci/ice1712/maya44.h @@ -0,0 +1,10 @@ +#ifndef __SOUND_MAYA44_H +#define __SOUND_MAYA44_H + +#define MAYA44_DEVICE_DESC "{ESI,Maya44}," + +#define VT1724_SUBDEVICE_MAYA44 0x34315441 /* Maya44 */ + +extern struct snd_ice1712_card_info snd_vt1724_maya44_cards[]; + +#endif /* __SOUND_MAYA44_H */ diff --git a/sound/pci/lx6464es/Makefile b/sound/pci/lx6464es/Makefile new file mode 100644 index 0000000..eb04a6c --- /dev/null +++ b/sound/pci/lx6464es/Makefile @@ -0,0 +1,2 @@ +snd-lx6464es-objs := lx6464es.o lx_core.o +obj-$(CONFIG_SND_LX6464ES) += snd-lx6464es.o diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c new file mode 100644 index 0000000..ccf1b38 --- /dev/null +++ b/sound/pci/lx6464es/lx6464es.c @@ -0,0 +1,1159 @@ +/* -*- linux-c -*- * + * + * ALSA driver for the digigram lx6464es interface + * + * Copyright (c) 2008, 2009 Tim Blechmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include "lx6464es.h" + +MODULE_AUTHOR("Tim Blechmann"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("digigram lx6464es"); +MODULE_SUPPORTED_DEVICE("{digigram lx6464es{}}"); + + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for Digigram LX6464ES interface."); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for Digigram LX6464ES interface."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable/disable specific Digigram LX6464ES soundcards."); + +static const char card_name[] = "LX6464ES"; + + +#define PCI_DEVICE_ID_PLX_LX6464ES PCI_DEVICE_ID_PLX_9056 + +static struct pci_device_id snd_lx6464es_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES), + .subvendor = PCI_VENDOR_ID_DIGIGRAM, + .subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM + }, /* LX6464ES */ + { PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES), + .subvendor = PCI_VENDOR_ID_DIGIGRAM, + .subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM + }, /* LX6464ES-CAE */ + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, snd_lx6464es_ids); + + + +/* PGO pour USERo dans le registre pci_0x06/loc_0xEC */ +#define CHIPSC_RESET_XILINX (1L<<16) + + +/* alsa callbacks */ +static struct snd_pcm_hardware lx_caps = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_SYNC_START), + .formats = (SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_S24_3LE | + SNDRV_PCM_FMTBIT_S24_3BE), + .rates = (SNDRV_PCM_RATE_CONTINUOUS | + SNDRV_PCM_RATE_8000_192000), + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 2, + .channels_max = 64, + .buffer_bytes_max = 64*2*3*MICROBLAZE_IBL_MAX*MAX_STREAM_BUFFER, + .period_bytes_min = (2*2*MICROBLAZE_IBL_MIN*2), + .period_bytes_max = (4*64*MICROBLAZE_IBL_MAX*MAX_STREAM_BUFFER), + .periods_min = 2, + .periods_max = MAX_STREAM_BUFFER, +}; + +static int lx_set_granularity(struct lx6464es *chip, u32 gran); + + +static int lx_hardware_open(struct lx6464es *chip, + struct snd_pcm_substream *substream) +{ + int err = 0; + struct snd_pcm_runtime *runtime = substream->runtime; + int channels = runtime->channels; + int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + + snd_pcm_uframes_t period_size = runtime->period_size; + + snd_printd(LXP "allocating pipe for %d channels\n", channels); + err = lx_pipe_allocate(chip, 0, is_capture, channels); + if (err < 0) { + snd_printk(KERN_ERR LXP "allocating pipe failed\n"); + return err; + } + + err = lx_set_granularity(chip, period_size); + if (err < 0) { + snd_printk(KERN_ERR LXP "setting granularity to %ld failed\n", + period_size); + return err; + } + + return 0; +} + +static int lx_hardware_start(struct lx6464es *chip, + struct snd_pcm_substream *substream) +{ + int err = 0; + struct snd_pcm_runtime *runtime = substream->runtime; + int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + + snd_printd(LXP "setting stream format\n"); + err = lx_stream_set_format(chip, runtime, 0, is_capture); + if (err < 0) { + snd_printk(KERN_ERR LXP "setting stream format failed\n"); + return err; + } + + snd_printd(LXP "starting pipe\n"); + err = lx_pipe_start(chip, 0, is_capture); + if (err < 0) { + snd_printk(KERN_ERR LXP "starting pipe failed\n"); + return err; + } + + snd_printd(LXP "waiting for pipe to start\n"); + err = lx_pipe_wait_for_start(chip, 0, is_capture); + if (err < 0) { + snd_printk(KERN_ERR LXP "waiting for pipe failed\n"); + return err; + } + + return err; +} + + +static int lx_hardware_stop(struct lx6464es *chip, + struct snd_pcm_substream *substream) +{ + int err = 0; + int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + + snd_printd(LXP "pausing pipe\n"); + err = lx_pipe_pause(chip, 0, is_capture); + if (err < 0) { + snd_printk(KERN_ERR LXP "pausing pipe failed\n"); + return err; + } + + snd_printd(LXP "waiting for pipe to become idle\n"); + err = lx_pipe_wait_for_idle(chip, 0, is_capture); + if (err < 0) { + snd_printk(KERN_ERR LXP "waiting for pipe failed\n"); + return err; + } + + snd_printd(LXP "stopping pipe\n"); + err = lx_pipe_stop(chip, 0, is_capture); + if (err < 0) { + snd_printk(LXP "stopping pipe failed\n"); + return err; + } + + return err; +} + + +static int lx_hardware_close(struct lx6464es *chip, + struct snd_pcm_substream *substream) +{ + int err = 0; + int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + + snd_printd(LXP "releasing pipe\n"); + err = lx_pipe_release(chip, 0, is_capture); + if (err < 0) { + snd_printk(LXP "releasing pipe failed\n"); + return err; + } + + return err; +} + + +static int lx_pcm_open(struct snd_pcm_substream *substream) +{ + struct lx6464es *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int err = 0; + int board_rate; + + snd_printdd("->lx_pcm_open\n"); + mutex_lock(&chip->setup_mutex); + + /* copy the struct snd_pcm_hardware struct */ + runtime->hw = lx_caps; + +#if 0 + /* buffer-size should better be multiple of period-size */ + err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) { + snd_printk(KERN_WARNING LXP "could not constrain periods\n"); + goto exit; + } +#endif + + /* the clock rate cannot be changed */ + board_rate = chip->board_sample_rate; + err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE, + board_rate, board_rate); + + if (err < 0) { + snd_printk(KERN_WARNING LXP "could not constrain periods\n"); + goto exit; + } + + /* constrain period size */ + err = snd_pcm_hw_constraint_minmax(runtime, + SNDRV_PCM_HW_PARAM_PERIOD_SIZE, + MICROBLAZE_IBL_MIN, + MICROBLAZE_IBL_MAX); + if (err < 0) { + snd_printk(KERN_WARNING LXP + "could not constrain period size\n"); + goto exit; + } + + snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_BUFFER_SIZE, 32); + + snd_pcm_set_sync(substream); + err = 0; + +exit: + runtime->private_data = chip; + + mutex_unlock(&chip->setup_mutex); + snd_printdd("<-lx_pcm_open, %d\n", err); + return err; +} + +static int lx_pcm_close(struct snd_pcm_substream *substream) +{ + int err = 0; + snd_printdd("->lx_pcm_close\n"); + return err; +} + +static snd_pcm_uframes_t lx_pcm_stream_pointer(struct snd_pcm_substream + *substream) +{ + struct lx6464es *chip = snd_pcm_substream_chip(substream); + snd_pcm_uframes_t pos; + unsigned long flags; + int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + + struct lx_stream *lx_stream = is_capture ? &chip->capture_stream : + &chip->playback_stream; + + snd_printdd("->lx_pcm_stream_pointer\n"); + + spin_lock_irqsave(&chip->lock, flags); + pos = lx_stream->frame_pos * substream->runtime->period_size; + spin_unlock_irqrestore(&chip->lock, flags); + + snd_printdd(LXP "stream_pointer at %ld\n", pos); + return pos; +} + +static int lx_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct lx6464es *chip = snd_pcm_substream_chip(substream); + int err = 0; + const int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + + snd_printdd("->lx_pcm_prepare\n"); + + mutex_lock(&chip->setup_mutex); + + if (chip->hardware_running[is_capture]) { + err = lx_hardware_stop(chip, substream); + if (err < 0) { + snd_printk(KERN_ERR LXP "failed to stop hardware. " + "Error code %d\n", err); + goto exit; + } + + err = lx_hardware_close(chip, substream); + if (err < 0) { + snd_printk(KERN_ERR LXP "failed to close hardware. " + "Error code %d\n", err); + goto exit; + } + } + + snd_printd(LXP "opening hardware\n"); + err = lx_hardware_open(chip, substream); + if (err < 0) { + snd_printk(KERN_ERR LXP "failed to open hardware. " + "Error code %d\n", err); + goto exit; + } + + err = lx_hardware_start(chip, substream); + if (err < 0) { + snd_printk(KERN_ERR LXP "failed to start hardware. " + "Error code %d\n", err); + goto exit; + } + + chip->hardware_running[is_capture] = 1; + + if (chip->board_sample_rate != substream->runtime->rate) { + if (!err) + chip->board_sample_rate = substream->runtime->rate; + } + +exit: + mutex_unlock(&chip->setup_mutex); + return err; +} + +static int lx_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params, int is_capture) +{ + struct lx6464es *chip = snd_pcm_substream_chip(substream); + int err = 0; + + snd_printdd("->lx_pcm_hw_params\n"); + + mutex_lock(&chip->setup_mutex); + + /* set dma buffer */ + err = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + + if (is_capture) + chip->capture_stream.stream = substream; + else + chip->playback_stream.stream = substream; + + mutex_unlock(&chip->setup_mutex); + return err; +} + +static int lx_pcm_hw_params_playback(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + return lx_pcm_hw_params(substream, hw_params, 0); +} + +static int lx_pcm_hw_params_capture(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + return lx_pcm_hw_params(substream, hw_params, 1); +} + +static int lx_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct lx6464es *chip = snd_pcm_substream_chip(substream); + int err = 0; + int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + + snd_printdd("->lx_pcm_hw_free\n"); + mutex_lock(&chip->setup_mutex); + + if (chip->hardware_running[is_capture]) { + err = lx_hardware_stop(chip, substream); + if (err < 0) { + snd_printk(KERN_ERR LXP "failed to stop hardware. " + "Error code %d\n", err); + goto exit; + } + + err = lx_hardware_close(chip, substream); + if (err < 0) { + snd_printk(KERN_ERR LXP "failed to close hardware. " + "Error code %d\n", err); + goto exit; + } + + chip->hardware_running[is_capture] = 0; + } + + err = snd_pcm_lib_free_pages(substream); + + if (is_capture) + chip->capture_stream.stream = 0; + else + chip->playback_stream.stream = 0; + +exit: + mutex_unlock(&chip->setup_mutex); + return err; +} + +static void lx_trigger_start(struct lx6464es *chip, struct lx_stream *lx_stream) +{ + struct snd_pcm_substream *substream = lx_stream->stream; + const int is_capture = lx_stream->is_capture; + + int err; + + const u32 channels = substream->runtime->channels; + const u32 bytes_per_frame = channels * 3; + const u32 period_size = substream->runtime->period_size; + const u32 periods = substream->runtime->periods; + const u32 period_bytes = period_size * bytes_per_frame; + + dma_addr_t buf = substream->dma_buffer.addr; + int i; + + u32 needed, freed; + u32 size_array[5]; + + for (i = 0; i != periods; ++i) { + u32 buffer_index = 0; + + err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, + size_array); + snd_printdd(LXP "starting: needed %d, freed %d\n", + needed, freed); + + err = lx_buffer_give(chip, 0, is_capture, period_bytes, + lower_32_bits(buf), upper_32_bits(buf), + &buffer_index); + + snd_printdd(LXP "starting: buffer index %x on %p (%d bytes)\n", + buffer_index, (void *)buf, period_bytes); + buf += period_bytes; + } + + err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, size_array); + snd_printdd(LXP "starting: needed %d, freed %d\n", needed, freed); + + snd_printd(LXP "starting: starting stream\n"); + err = lx_stream_start(chip, 0, is_capture); + if (err < 0) + snd_printk(KERN_ERR LXP "couldn't start stream\n"); + else + lx_stream->status = LX_STREAM_STATUS_RUNNING; + + lx_stream->frame_pos = 0; +} + +static void lx_trigger_stop(struct lx6464es *chip, struct lx_stream *lx_stream) +{ + const int is_capture = lx_stream->is_capture; + int err; + + snd_printd(LXP "stopping: stopping stream\n"); + err = lx_stream_stop(chip, 0, is_capture); + if (err < 0) + snd_printk(KERN_ERR LXP "couldn't stop stream\n"); + else + lx_stream->status = LX_STREAM_STATUS_FREE; + +} + +static void lx_trigger_tasklet_dispatch_stream(struct lx6464es *chip, + struct lx_stream *lx_stream) +{ + switch (lx_stream->status) { + case LX_STREAM_STATUS_SCHEDULE_RUN: + lx_trigger_start(chip, lx_stream); + break; + + case LX_STREAM_STATUS_SCHEDULE_STOP: + lx_trigger_stop(chip, lx_stream); + break; + + default: + break; + } +} + +static void lx_trigger_tasklet(unsigned long data) +{ + struct lx6464es *chip = (struct lx6464es *)data; + unsigned long flags; + + snd_printdd("->lx_trigger_tasklet\n"); + + spin_lock_irqsave(&chip->lock, flags); + lx_trigger_tasklet_dispatch_stream(chip, &chip->capture_stream); + lx_trigger_tasklet_dispatch_stream(chip, &chip->playback_stream); + spin_unlock_irqrestore(&chip->lock, flags); +} + +static int lx_pcm_trigger_dispatch(struct lx6464es *chip, + struct lx_stream *lx_stream, int cmd) +{ + int err = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + lx_stream->status = LX_STREAM_STATUS_SCHEDULE_RUN; + break; + + case SNDRV_PCM_TRIGGER_STOP: + lx_stream->status = LX_STREAM_STATUS_SCHEDULE_STOP; + break; + + default: + err = -EINVAL; + goto exit; + } + tasklet_schedule(&chip->trigger_tasklet); + +exit: + return err; +} + + +static int lx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct lx6464es *chip = snd_pcm_substream_chip(substream); + const int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + struct lx_stream *stream = is_capture ? &chip->capture_stream : + &chip->playback_stream; + + snd_printdd("->lx_pcm_trigger\n"); + + return lx_pcm_trigger_dispatch(chip, stream, cmd); +} + +static int snd_lx6464es_free(struct lx6464es *chip) +{ + snd_printdd("->snd_lx6464es_free\n"); + + lx_irq_disable(chip); + + if (chip->irq >= 0) + free_irq(chip->irq, chip); + + iounmap(chip->port_dsp_bar); + ioport_unmap(chip->port_plx_remapped); + + pci_release_regions(chip->pci); + pci_disable_device(chip->pci); + + kfree(chip); + + return 0; +} + +static int snd_lx6464es_dev_free(struct snd_device *device) +{ + return snd_lx6464es_free(device->device_data); +} + +/* reset the dsp during initialization */ +static int __devinit lx_init_xilinx_reset(struct lx6464es *chip) +{ + int i; + u32 plx_reg = lx_plx_reg_read(chip, ePLX_CHIPSC); + + snd_printdd("->lx_init_xilinx_reset\n"); + + /* activate reset of xilinx */ + plx_reg &= ~CHIPSC_RESET_XILINX; + + lx_plx_reg_write(chip, ePLX_CHIPSC, plx_reg); + msleep(1); + + lx_plx_reg_write(chip, ePLX_MBOX3, 0); + msleep(1); + + plx_reg |= CHIPSC_RESET_XILINX; + lx_plx_reg_write(chip, ePLX_CHIPSC, plx_reg); + + /* deactivate reset of xilinx */ + for (i = 0; i != 100; ++i) { + u32 reg_mbox3; + msleep(10); + reg_mbox3 = lx_plx_reg_read(chip, ePLX_MBOX3); + if (reg_mbox3) { + snd_printd(LXP "xilinx reset done\n"); + snd_printdd(LXP "xilinx took %d loops\n", i); + break; + } + } + + /* todo: add some error handling? */ + + /* clear mr */ + lx_dsp_reg_write(chip, eReg_CSM, 0); + + /* le xilinx ES peut ne pas etre encore pret, on attend. */ + msleep(600); + + return 0; +} + +static int __devinit lx_init_xilinx_test(struct lx6464es *chip) +{ + u32 reg; + + snd_printdd("->lx_init_xilinx_test\n"); + + /* TEST if we have access to Xilinx/MicroBlaze */ + lx_dsp_reg_write(chip, eReg_CSM, 0); + + reg = lx_dsp_reg_read(chip, eReg_CSM); + + if (reg) { + snd_printk(KERN_ERR LXP "Problem: Reg_CSM %x.\n", reg); + + /* PCI9056_SPACE0_REMAP */ + lx_plx_reg_write(chip, ePLX_PCICR, 1); + + reg = lx_dsp_reg_read(chip, eReg_CSM); + if (reg) { + snd_printk(KERN_ERR LXP "Error: Reg_CSM %x.\n", reg); + return -EAGAIN; /* seems to be appropriate */ + } + } + + snd_printd(LXP "Xilinx/MicroBlaze access test successful\n"); + + return 0; +} + +/* initialize ethersound */ +static int __devinit lx_init_ethersound_config(struct lx6464es *chip) +{ + int i; + u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES); + + u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) | + (64 << IOCR_INPUTS_OFFSET) | + (FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET); + + u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) + | (default_conf_es & CONFES_WRITE_PART_MASK); + + snd_printdd("->lx_init_ethersound\n"); + + chip->freq_ratio = FREQ_RATIO_SINGLE_MODE; + + /* + * write it to the card ! + * this actually kicks the ES xilinx, the first time since poweron. + * the MAC address in the Reg_ADMACESMSB Reg_ADMACESLSB registers + * is not ready before this is done, and the bit 2 in Reg_CSES is set. + * */ + lx_dsp_reg_write(chip, eReg_CONFES, conf_es); + + for (i = 0; i != 1000; ++i) { + if (lx_dsp_reg_read(chip, eReg_CSES) & 4) { + snd_printd(LXP "ethersound initialized after %dms\n", + i); + goto ethersound_initialized; + } + msleep(1); + } + snd_printk(KERN_WARNING LXP + "ethersound could not be initialized after %dms\n", i); + return -ETIMEDOUT; + + ethersound_initialized: + snd_printd(LXP "ethersound initialized\n"); + return 0; +} + +static int __devinit lx_init_get_version_features(struct lx6464es *chip) +{ + u32 dsp_version; + + int err; + + snd_printdd("->lx_init_get_version_features\n"); + + err = lx_dsp_get_version(chip, &dsp_version); + + if (err == 0) { + u32 freq; + + snd_printk(LXP "DSP version: V%02d.%02d #%d\n", + (dsp_version>>16) & 0xff, (dsp_version>>8) & 0xff, + dsp_version & 0xff); + + /* later: what firmware version do we expect? */ + + /* retrieve Play/Rec features */ + /* done here because we may have to handle alternate + * DSP files. */ + /* later */ + + /* init the EtherSound sample rate */ + err = lx_dsp_get_clock_frequency(chip, &freq); + if (err == 0) + chip->board_sample_rate = freq; + snd_printd(LXP "actual clock frequency %d\n", freq); + } else { + snd_printk(KERN_ERR LXP "DSP corrupted \n"); + err = -EAGAIN; + } + + return err; +} + +static int lx_set_granularity(struct lx6464es *chip, u32 gran) +{ + int err = 0; + u32 snapped_gran = MICROBLAZE_IBL_MIN; + + snd_printdd("->lx_set_granularity\n"); + + /* blocksize is a power of 2 */ + while ((snapped_gran < gran) && + (snapped_gran < MICROBLAZE_IBL_MAX)) { + snapped_gran *= 2; + } + + if (snapped_gran == chip->pcm_granularity) + return 0; + + err = lx_dsp_set_granularity(chip, snapped_gran); + if (err < 0) { + snd_printk(KERN_WARNING LXP "could not set granularity\n"); + err = -EAGAIN; + } + + if (snapped_gran != gran) + snd_printk(LXP "snapped blocksize to %d\n", snapped_gran); + + snd_printd(LXP "set blocksize on board %d\n", snapped_gran); + chip->pcm_granularity = snapped_gran; + + return err; +} + +/* initialize and test the xilinx dsp chip */ +static int __devinit lx_init_dsp(struct lx6464es *chip) +{ + int err; + u8 mac_address[6]; + int i; + + snd_printdd("->lx_init_dsp\n"); + + snd_printd(LXP "initialize board\n"); + err = lx_init_xilinx_reset(chip); + if (err) + return err; + + snd_printd(LXP "testing board\n"); + err = lx_init_xilinx_test(chip); + if (err) + return err; + + snd_printd(LXP "initialize ethersound configuration\n"); + err = lx_init_ethersound_config(chip); + if (err) + return err; + + lx_irq_enable(chip); + + /** \todo the mac address should be ready by not, but it isn't, + * so we wait for it */ + for (i = 0; i != 1000; ++i) { + err = lx_dsp_get_mac(chip, mac_address); + if (err) + return err; + if (mac_address[0] || mac_address[1] || mac_address[2] || + mac_address[3] || mac_address[4] || mac_address[5]) + goto mac_ready; + msleep(1); + } + return -ETIMEDOUT; + +mac_ready: + snd_printd(LXP "mac address ready read after: %dms\n", i); + snd_printk(LXP "mac address: %02X.%02X.%02X.%02X.%02X.%02X\n", + mac_address[0], mac_address[1], mac_address[2], + mac_address[3], mac_address[4], mac_address[5]); + + err = lx_init_get_version_features(chip); + if (err) + return err; + + lx_set_granularity(chip, MICROBLAZE_IBL_DEFAULT); + + chip->playback_mute = 0; + + return err; +} + +static struct snd_pcm_ops lx_ops_playback = { + .open = lx_pcm_open, + .close = lx_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .prepare = lx_pcm_prepare, + .hw_params = lx_pcm_hw_params_playback, + .hw_free = lx_pcm_hw_free, + .trigger = lx_pcm_trigger, + .pointer = lx_pcm_stream_pointer, +}; + +static struct snd_pcm_ops lx_ops_capture = { + .open = lx_pcm_open, + .close = lx_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .prepare = lx_pcm_prepare, + .hw_params = lx_pcm_hw_params_capture, + .hw_free = lx_pcm_hw_free, + .trigger = lx_pcm_trigger, + .pointer = lx_pcm_stream_pointer, +}; + +static int __devinit lx_pcm_create(struct lx6464es *chip) +{ + int err; + struct snd_pcm *pcm; + + u32 size = 64 * /* channels */ + 3 * /* 24 bit samples */ + MAX_STREAM_BUFFER * /* periods */ + MICROBLAZE_IBL_MAX * /* frames per period */ + 2; /* duplex */ + + size = PAGE_ALIGN(size); + + /* hardcoded device name & channel count */ + err = snd_pcm_new(chip->card, (char *)card_name, 0, + 1, 1, &pcm); + + pcm->private_data = chip; + + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &lx_ops_playback); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &lx_ops_capture); + + pcm->info_flags = 0; + strcpy(pcm->name, card_name); + + err = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data(chip->pci), + size, size); + if (err < 0) + return err; + + chip->pcm = pcm; + chip->capture_stream.is_capture = 1; + + return 0; +} + +static int lx_control_playback_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int lx_control_playback_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct lx6464es *chip = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = chip->playback_mute; + return 0; +} + +static int lx_control_playback_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct lx6464es *chip = snd_kcontrol_chip(kcontrol); + int changed = 0; + int current_value = chip->playback_mute; + + if (current_value != ucontrol->value.integer.value[0]) { + lx_level_unmute(chip, 0, !current_value); + chip->playback_mute = !current_value; + changed = 1; + } + return changed; +} + +static struct snd_kcontrol_new lx_control_playback_switch __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "PCM Playback Switch", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .private_value = 0, + .info = lx_control_playback_info, + .get = lx_control_playback_get, + .put = lx_control_playback_put +}; + + + +static void lx_proc_levels_read(struct snd_info_entry *entry, + struct snd_info_buffer *buffer) +{ + u32 levels[64]; + int err; + int i, j; + struct lx6464es *chip = entry->private_data; + + snd_iprintf(buffer, "capture levels:\n"); + err = lx_level_peaks(chip, 1, 64, levels); + if (err < 0) + return; + + for (i = 0; i != 8; ++i) { + for (j = 0; j != 8; ++j) + snd_iprintf(buffer, "%08x ", levels[i*8+j]); + snd_iprintf(buffer, "\n"); + } + + snd_iprintf(buffer, "\nplayback levels:\n"); + + err = lx_level_peaks(chip, 0, 64, levels); + if (err < 0) + return; + + for (i = 0; i != 8; ++i) { + for (j = 0; j != 8; ++j) + snd_iprintf(buffer, "%08x ", levels[i*8+j]); + snd_iprintf(buffer, "\n"); + } + + snd_iprintf(buffer, "\n"); +} + +static int __devinit lx_proc_create(struct snd_card *card, struct lx6464es *chip) +{ + struct snd_info_entry *entry; + int err = snd_card_proc_new(card, "levels", &entry); + if (err < 0) + return err; + + snd_info_set_text_ops(entry, chip, lx_proc_levels_read); + return 0; +} + + +static int __devinit snd_lx6464es_create(struct snd_card *card, + struct pci_dev *pci, + struct lx6464es **rchip) +{ + struct lx6464es *chip; + int err; + + static struct snd_device_ops ops = { + .dev_free = snd_lx6464es_dev_free, + }; + + snd_printdd("->snd_lx6464es_create\n"); + + *rchip = NULL; + + /* enable PCI device */ + err = pci_enable_device(pci); + if (err < 0) + return err; + + pci_set_master(pci); + + /* check if we can restrict PCI DMA transfers to 32 bits */ + err = pci_set_dma_mask(pci, DMA_32BIT_MASK); + if (err < 0) { + snd_printk(KERN_ERR "architecture does not support " + "32bit PCI busmaster DMA\n"); + pci_disable_device(pci); + return -ENXIO; + } + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (chip == NULL) { + err = -ENOMEM; + goto alloc_failed; + } + + chip->card = card; + chip->pci = pci; + chip->irq = -1; + + /* initialize synchronization structs */ + spin_lock_init(&chip->lock); + spin_lock_init(&chip->msg_lock); + mutex_init(&chip->setup_mutex); + tasklet_init(&chip->trigger_tasklet, lx_trigger_tasklet, + (unsigned long)chip); + tasklet_init(&chip->tasklet_capture, lx_tasklet_capture, + (unsigned long)chip); + tasklet_init(&chip->tasklet_playback, lx_tasklet_playback, + (unsigned long)chip); + + /* request resources */ + err = pci_request_regions(pci, card_name); + if (err < 0) + goto request_regions_failed; + + /* plx port */ + chip->port_plx = pci_resource_start(pci, 1); + chip->port_plx_remapped = ioport_map(chip->port_plx, + pci_resource_len(pci, 1)); + + /* dsp port */ + chip->port_dsp_bar = pci_ioremap_bar(pci, 2); + + err = request_irq(pci->irq, lx_interrupt, IRQF_SHARED, + card_name, chip); + if (err) { + snd_printk(KERN_ERR LXP "unable to grab IRQ %d\n", pci->irq); + goto request_irq_failed; + } + chip->irq = pci->irq; + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) + goto device_new_failed; + + err = lx_init_dsp(chip); + if (err < 0) { + snd_printk(KERN_ERR LXP "error during DSP initialization\n"); + return err; + } + + err = lx_pcm_create(chip); + if (err < 0) + return err; + + err = lx_proc_create(card, chip); + if (err < 0) + return err; + + err = snd_ctl_add(card, snd_ctl_new1(&lx_control_playback_switch, + chip)); + if (err < 0) + return err; + + snd_card_set_dev(card, &pci->dev); + + *rchip = chip; + return 0; + +device_new_failed: + free_irq(pci->irq, chip); + +request_irq_failed: + pci_release_regions(pci); + +request_regions_failed: + kfree(chip); + +alloc_failed: + pci_disable_device(pci); + + return err; +} + +static int __devinit snd_lx6464es_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id) +{ + static int dev; + struct snd_card *card; + struct lx6464es *chip; + int err; + + snd_printdd("->snd_lx6464es_probe\n"); + + if (dev >= SNDRV_CARDS) + return -ENODEV; + if (!enable[dev]) { + dev++; + return -ENOENT; + } + + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; + + err = snd_lx6464es_create(card, pci, &chip); + if (err < 0) { + snd_printk(KERN_ERR LXP "error during snd_lx6464es_create\n"); + goto out_free; + } + + strcpy(card->driver, "lx6464es"); + strcpy(card->shortname, "Digigram LX6464ES"); + sprintf(card->longname, "%s at 0x%lx, 0x%p, irq %i", + card->shortname, chip->port_plx, + chip->port_dsp_bar, chip->irq); + + err = snd_card_register(card); + if (err < 0) + goto out_free; + + snd_printdd(LXP "initialization successful\n"); + pci_set_drvdata(pci, card); + dev++; + return 0; + +out_free: + snd_card_free(card); + return err; + +} + +static void __devexit snd_lx6464es_remove(struct pci_dev *pci) +{ + snd_card_free(pci_get_drvdata(pci)); + pci_set_drvdata(pci, NULL); +} + + +static struct pci_driver driver = { + .name = "Digigram LX6464ES", + .id_table = snd_lx6464es_ids, + .probe = snd_lx6464es_probe, + .remove = __devexit_p(snd_lx6464es_remove), +}; + + +/* module initialization */ +static int __init mod_init(void) +{ + return pci_register_driver(&driver); +} + +static void __exit mod_exit(void) +{ + pci_unregister_driver(&driver); +} + +module_init(mod_init); +module_exit(mod_exit); diff --git a/sound/pci/lx6464es/lx6464es.h b/sound/pci/lx6464es/lx6464es.h new file mode 100644 index 0000000..012c010 --- /dev/null +++ b/sound/pci/lx6464es/lx6464es.h @@ -0,0 +1,114 @@ +/* -*- linux-c -*- * + * + * ALSA driver for the digigram lx6464es interface + * + * Copyright (c) 2009 Tim Blechmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * + */ + +#ifndef LX6464ES_H +#define LX6464ES_H + +#include +#include + +#include +#include + +#include "lx_core.h" + +#define LXP "LX6464ES: " + +enum { + ES_cmd_free = 0, /* no command executing */ + ES_cmd_processing = 1, /* execution of a read/write command */ + ES_read_pending = 2, /* a asynchron read command is pending */ + ES_read_finishing = 3, /* a read command has finished waiting (set by + * Interrupt or CancelIrp) */ +}; + +enum lx_stream_status { + LX_STREAM_STATUS_FREE, +/* LX_STREAM_STATUS_OPEN, */ + LX_STREAM_STATUS_SCHEDULE_RUN, +/* LX_STREAM_STATUS_STARTED, */ + LX_STREAM_STATUS_RUNNING, + LX_STREAM_STATUS_SCHEDULE_STOP, +/* LX_STREAM_STATUS_STOPPED, */ +/* LX_STREAM_STATUS_PAUSED */ +}; + + +struct lx_stream { + struct snd_pcm_substream *stream; + snd_pcm_uframes_t frame_pos; + enum lx_stream_status status; /* free, open, running, draining + * pause */ + int is_capture:1; +}; + + +struct lx6464es { + struct snd_card *card; + struct pci_dev *pci; + int irq; + + spinlock_t lock; /* interrupt spinlock */ + struct mutex setup_mutex; /* mutex used in hw_params, open + * and close */ + + struct tasklet_struct trigger_tasklet; /* trigger tasklet */ + struct tasklet_struct tasklet_capture; + struct tasklet_struct tasklet_playback; + + /* ports */ + unsigned long port_plx; /* io port (size=256) */ + void __iomem *port_plx_remapped; /* remapped plx port */ + void __iomem *port_dsp_bar; /* memory port (32-bit, + * non-prefetchable, + * size=8K) */ + + /* messaging */ + spinlock_t msg_lock; /* message spinlock */ + atomic_t send_message_locked; + struct lx_rmh rmh; + + /* configuration */ + uint freq_ratio : 2; + uint playback_mute : 1; + uint hardware_running[2]; + u32 board_sample_rate; /* sample rate read from + * board */ + u32 sample_rate; /* our sample rate */ + u16 pcm_granularity; /* board blocksize */ + + /* dma */ + struct snd_dma_buffer capture_dma_buf; + struct snd_dma_buffer playback_dma_buf; + + /* pcm */ + struct snd_pcm *pcm; + + /* streams */ + struct lx_stream capture_stream; + struct lx_stream playback_stream; +}; + + +#endif /* LX6464ES_H */ diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c new file mode 100644 index 0000000..5812780 --- /dev/null +++ b/sound/pci/lx6464es/lx_core.c @@ -0,0 +1,1444 @@ +/* -*- linux-c -*- * + * + * ALSA driver for the digigram lx6464es interface + * low-level interface + * + * Copyright (c) 2009 Tim Blechmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * + */ + +/* #define RMH_DEBUG 1 */ + +#include +#include +#include + +#include "lx6464es.h" +#include "lx_core.h" + +/* low-level register access */ + +static const unsigned long dsp_port_offsets[] = { + 0, + 0x400, + 0x401, + 0x402, + 0x403, + 0x404, + 0x405, + 0x406, + 0x407, + 0x408, + 0x409, + 0x40a, + 0x40b, + 0x40c, + + 0x410, + 0x411, + 0x412, + 0x413, + 0x414, + 0x415, + 0x416, + + 0x420, + 0x430, + 0x431, + 0x432, + 0x433, + 0x434, + 0x440 +}; + +static void __iomem *lx_dsp_register(struct lx6464es *chip, int port) +{ + void __iomem *base_address = chip->port_dsp_bar; + return base_address + dsp_port_offsets[port]*4; +} + +unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port) +{ + void __iomem *address = lx_dsp_register(chip, port); + return ioread32(address); +} + +void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len) +{ + void __iomem *address = lx_dsp_register(chip, port); + memcpy_fromio(data, address, len*sizeof(u32)); +} + + +void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data) +{ + void __iomem *address = lx_dsp_register(chip, port); + iowrite32(data, address); +} + +void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data, + u32 len) +{ + void __iomem *address = lx_dsp_register(chip, port); + memcpy_toio(address, data, len*sizeof(u32)); +} + + +static const unsigned long plx_port_offsets[] = { + 0x04, + 0x40, + 0x44, + 0x48, + 0x4c, + 0x50, + 0x54, + 0x58, + 0x5c, + 0x64, + 0x68, + 0x6C +}; + +static void __iomem *lx_plx_register(struct lx6464es *chip, int port) +{ + void __iomem *base_address = chip->port_plx_remapped; + return base_address + plx_port_offsets[port]; +} + +unsigned long lx_plx_reg_read(struct lx6464es *chip, int port) +{ + void __iomem *address = lx_plx_register(chip, port); + return ioread32(address); +} + +void lx_plx_reg_write(struct lx6464es *chip, int port, u32 data) +{ + void __iomem *address = lx_plx_register(chip, port); + iowrite32(data, address); +} + +u32 lx_plx_mbox_read(struct lx6464es *chip, int mbox_nr) +{ + int index; + + switch (mbox_nr) { + case 1: + index = ePLX_MBOX1; break; + case 2: + index = ePLX_MBOX2; break; + case 3: + index = ePLX_MBOX3; break; + case 4: + index = ePLX_MBOX4; break; + case 5: + index = ePLX_MBOX5; break; + case 6: + index = ePLX_MBOX6; break; + case 7: + index = ePLX_MBOX7; break; + case 0: /* reserved for HF flags */ + snd_BUG(); + default: + return 0xdeadbeef; + } + + return lx_plx_reg_read(chip, index); +} + +int lx_plx_mbox_write(struct lx6464es *chip, int mbox_nr, u32 value) +{ + int index = -1; + + switch (mbox_nr) { + case 1: + index = ePLX_MBOX1; break; + case 3: + index = ePLX_MBOX3; break; + case 4: + index = ePLX_MBOX4; break; + case 5: + index = ePLX_MBOX5; break; + case 6: + index = ePLX_MBOX6; break; + case 7: + index = ePLX_MBOX7; break; + case 0: /* reserved for HF flags */ + case 2: /* reserved for Pipe States + * the DSP keeps an image of it */ + snd_BUG(); + return -EBADRQC; + } + + lx_plx_reg_write(chip, index, value); + return 0; +} + + +/* rmh */ + +#ifdef CONFIG_SND_DEBUG +#define CMD_NAME(a) a +#else +#define CMD_NAME(a) NULL +#endif + +#define Reg_CSM_MR 0x00000002 +#define Reg_CSM_MC 0x00000001 + +struct dsp_cmd_info { + u32 dcCodeOp; /* Op Code of the command (usually 1st 24-bits + * word).*/ + u16 dcCmdLength; /* Command length in words of 24 bits.*/ + u16 dcStatusType; /* Status type: 0 for fixed length, 1 for + * random. */ + u16 dcStatusLength; /* Status length (if fixed).*/ + char *dcOpName; +}; + +/* + Initialization and control data for the Microblaze interface + - OpCode: + the opcode field of the command set at the proper offset + - CmdLength + the number of command words + - StatusType + offset in the status registers: 0 means that the return value may be + different from 0, and must be read + - StatusLength + the number of status words (in addition to the return value) +*/ + +static struct dsp_cmd_info dsp_commands[] = +{ + { (CMD_00_INFO_DEBUG << OPCODE_OFFSET) , 1 /*custom*/ + , 1 , 0 /**/ , CMD_NAME("INFO_DEBUG") }, + { (CMD_01_GET_SYS_CFG << OPCODE_OFFSET) , 1 /**/ + , 1 , 2 /**/ , CMD_NAME("GET_SYS_CFG") }, + { (CMD_02_SET_GRANULARITY << OPCODE_OFFSET) , 1 /**/ + , 1 , 0 /**/ , CMD_NAME("SET_GRANULARITY") }, + { (CMD_03_SET_TIMER_IRQ << OPCODE_OFFSET) , 1 /**/ + , 1 , 0 /**/ , CMD_NAME("SET_TIMER_IRQ") }, + { (CMD_04_GET_EVENT << OPCODE_OFFSET) , 1 /**/ + , 1 , 0 /*up to 10*/ , CMD_NAME("GET_EVENT") }, + { (CMD_05_GET_PIPES << OPCODE_OFFSET) , 1 /**/ + , 1 , 2 /*up to 4*/ , CMD_NAME("GET_PIPES") }, + { (CMD_06_ALLOCATE_PIPE << OPCODE_OFFSET) , 1 /**/ + , 0 , 0 /**/ , CMD_NAME("ALLOCATE_PIPE") }, + { (CMD_07_RELEASE_PIPE << OPCODE_OFFSET) , 1 /**/ + , 0 , 0 /**/ , CMD_NAME("RELEASE_PIPE") }, + { (CMD_08_ASK_BUFFERS << OPCODE_OFFSET) , 1 /**/ + , 1 , MAX_STREAM_BUFFER , CMD_NAME("ASK_BUFFERS") }, + { (CMD_09_STOP_PIPE << OPCODE_OFFSET) , 1 /**/ + , 0 , 0 /*up to 2*/ , CMD_NAME("STOP_PIPE") }, + { (CMD_0A_GET_PIPE_SPL_COUNT << OPCODE_OFFSET) , 1 /**/ + , 1 , 1 /*up to 2*/ , CMD_NAME("GET_PIPE_SPL_COUNT") }, + { (CMD_0B_TOGGLE_PIPE_STATE << OPCODE_OFFSET) , 1 /*up to 5*/ + , 1 , 0 /**/ , CMD_NAME("TOGGLE_PIPE_STATE") }, + { (CMD_0C_DEF_STREAM << OPCODE_OFFSET) , 1 /*up to 4*/ + , 1 , 0 /**/ , CMD_NAME("DEF_STREAM") }, + { (CMD_0D_SET_MUTE << OPCODE_OFFSET) , 3 /**/ + , 1 , 0 /**/ , CMD_NAME("SET_MUTE") }, + { (CMD_0E_GET_STREAM_SPL_COUNT << OPCODE_OFFSET) , 1/**/ + , 1 , 2 /**/ , CMD_NAME("GET_STREAM_SPL_COUNT") }, + { (CMD_0F_UPDATE_BUFFER << OPCODE_OFFSET) , 3 /*up to 4*/ + , 0 , 1 /**/ , CMD_NAME("UPDATE_BUFFER") }, + { (CMD_10_GET_BUFFER << OPCODE_OFFSET) , 1 /**/ + , 1 , 4 /**/ , CMD_NAME("GET_BUFFER") }, + { (CMD_11_CANCEL_BUFFER << OPCODE_OFFSET) , 1 /**/ + , 1 , 1 /*up to 4*/ , CMD_NAME("CANCEL_BUFFER") }, + { (CMD_12_GET_PEAK << OPCODE_OFFSET) , 1 /**/ + , 1 , 1 /**/ , CMD_NAME("GET_PEAK") }, + { (CMD_13_SET_STREAM_STATE << OPCODE_OFFSET) , 1 /**/ + , 1 , 0 /**/ , CMD_NAME("SET_STREAM_STATE") }, +}; + +static void lx_message_init(struct lx_rmh *rmh, enum cmd_mb_opcodes cmd) +{ + snd_BUG_ON(cmd >= CMD_14_INVALID); + + rmh->cmd[0] = dsp_commands[cmd].dcCodeOp; + rmh->cmd_len = dsp_commands[cmd].dcCmdLength; + rmh->stat_len = dsp_commands[cmd].dcStatusLength; + rmh->dsp_stat = dsp_commands[cmd].dcStatusType; + rmh->cmd_idx = cmd; + memset(&rmh->cmd[1], 0, (REG_CRM_NUMBER - 1) * sizeof(u32)); + +#ifdef CONFIG_SND_DEBUG + memset(rmh->stat, 0, REG_CRM_NUMBER * sizeof(u32)); +#endif +#ifdef RMH_DEBUG + rmh->cmd_idx = cmd; +#endif +} + +#ifdef RMH_DEBUG +#define LXRMH "lx6464es rmh: " +static void lx_message_dump(struct lx_rmh *rmh) +{ + u8 idx = rmh->cmd_idx; + int i; + + snd_printk(LXRMH "command %s\n", dsp_commands[idx].dcOpName); + + for (i = 0; i != rmh->cmd_len; ++i) + snd_printk(LXRMH "\tcmd[%d] %08x\n", i, rmh->cmd[i]); + + for (i = 0; i != rmh->stat_len; ++i) + snd_printk(LXRMH "\tstat[%d]: %08x\n", i, rmh->stat[i]); + snd_printk("\n"); +} +#else +static inline void lx_message_dump(struct lx_rmh *rmh) +{} +#endif + + + +/* sleep 500 - 100 = 400 times 100us -> the timeout is >= 40 ms */ +#define XILINX_TIMEOUT_MS 40 +#define XILINX_POLL_NO_SLEEP 100 +#define XILINX_POLL_ITERATIONS 150 + +#if 0 /* not used now */ +static int lx_message_send(struct lx6464es *chip, struct lx_rmh *rmh) +{ + u32 reg = ED_DSP_TIMED_OUT; + int dwloop; + int answer_received; + + if (lx_dsp_reg_read(chip, eReg_CSM) & (Reg_CSM_MC | Reg_CSM_MR)) { + snd_printk(KERN_ERR LXP "PIOSendMessage eReg_CSM %x\n", reg); + return -EBUSY; + } + + /* write command */ + lx_dsp_reg_writebuf(chip, eReg_CRM1, rmh->cmd, rmh->cmd_len); + + snd_BUG_ON(atomic_read(&chip->send_message_locked) != 0); + atomic_set(&chip->send_message_locked, 1); + + /* MicoBlaze gogogo */ + lx_dsp_reg_write(chip, eReg_CSM, Reg_CSM_MC); + + /* wait for interrupt to answer */ + for (dwloop = 0; dwloop != XILINX_TIMEOUT_MS; ++dwloop) { + answer_received = atomic_read(&chip->send_message_locked); + if (answer_received == 0) + break; + msleep(1); + } + + if (answer_received == 0) { + /* in Debug mode verify Reg_CSM_MR */ + snd_BUG_ON(!(lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR)); + + /* command finished, read status */ + if (rmh->dsp_stat == 0) + reg = lx_dsp_reg_read(chip, eReg_CRM1); + else + reg = 0; + } else { + int i; + snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send! " + "Interrupts disabled?\n"); + + /* attente bit Reg_CSM_MR */ + for (i = 0; i != XILINX_POLL_ITERATIONS; i++) { + if ((lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR)) { + if (rmh->dsp_stat == 0) + reg = lx_dsp_reg_read(chip, eReg_CRM1); + else + reg = 0; + goto polling_successful; + } + + if (i > XILINX_POLL_NO_SLEEP) + msleep(1); + } + snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send! " + "polling failed\n"); + +polling_successful: + atomic_set(&chip->send_message_locked, 0); + } + + if ((reg & ERROR_VALUE) == 0) { + /* read response */ + if (rmh->stat_len) { + snd_BUG_ON(rmh->stat_len >= (REG_CRM_NUMBER-1)); + + lx_dsp_reg_readbuf(chip, eReg_CRM2, rmh->stat, + rmh->stat_len); + } + } else + snd_printk(KERN_WARNING LXP "lx_message_send: error_value %x\n", + reg); + + /* clear Reg_CSM_MR */ + lx_dsp_reg_write(chip, eReg_CSM, 0); + + switch (reg) { + case ED_DSP_TIMED_OUT: + snd_printk(KERN_WARNING LXP "lx_message_send: dsp timeout\n"); + return -ETIMEDOUT; + + case ED_DSP_CRASHED: + snd_printk(KERN_WARNING LXP "lx_message_send: dsp crashed\n"); + return -EAGAIN; + } + + lx_message_dump(rmh); + return 0; +} +#endif /* not used now */ + +static int lx_message_send_atomic(struct lx6464es *chip, struct lx_rmh *rmh) +{ + u32 reg = ED_DSP_TIMED_OUT; + int dwloop; + + if (lx_dsp_reg_read(chip, eReg_CSM) & (Reg_CSM_MC | Reg_CSM_MR)) { + snd_printk(KERN_ERR LXP "PIOSendMessage eReg_CSM %x\n", reg); + return -EBUSY; + } + + /* write command */ + lx_dsp_reg_writebuf(chip, eReg_CRM1, rmh->cmd, rmh->cmd_len); + + /* MicoBlaze gogogo */ + lx_dsp_reg_write(chip, eReg_CSM, Reg_CSM_MC); + + /* wait for interrupt to answer */ + for (dwloop = 0; dwloop != XILINX_TIMEOUT_MS * 1000; ++dwloop) { + if (lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR) { + if (rmh->dsp_stat == 0) + reg = lx_dsp_reg_read(chip, eReg_CRM1); + else + reg = 0; + goto polling_successful; + } else + udelay(1); + } + snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send_atomic! " + "polling failed\n"); + +polling_successful: + if ((reg & ERROR_VALUE) == 0) { + /* read response */ + if (rmh->stat_len) { + snd_BUG_ON(rmh->stat_len >= (REG_CRM_NUMBER-1)); + lx_dsp_reg_readbuf(chip, eReg_CRM2, rmh->stat, + rmh->stat_len); + } + } else + snd_printk(LXP "rmh error: %08x\n", reg); + + /* clear Reg_CSM_MR */ + lx_dsp_reg_write(chip, eReg_CSM, 0); + + switch (reg) { + case ED_DSP_TIMED_OUT: + snd_printk(KERN_WARNING LXP "lx_message_send: dsp timeout\n"); + return -ETIMEDOUT; + + case ED_DSP_CRASHED: + snd_printk(KERN_WARNING LXP "lx_message_send: dsp crashed\n"); + return -EAGAIN; + } + + lx_message_dump(rmh); + + return reg; +} + + +/* low-level dsp access */ +int __devinit lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version) +{ + u16 ret; + unsigned long flags; + + spin_lock_irqsave(&chip->msg_lock, flags); + + lx_message_init(&chip->rmh, CMD_01_GET_SYS_CFG); + ret = lx_message_send_atomic(chip, &chip->rmh); + + *rdsp_version = chip->rmh.stat[1]; + spin_unlock_irqrestore(&chip->msg_lock, flags); + return ret; +} + +int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq) +{ + u16 ret = 0; + unsigned long flags; + u32 freq_raw = 0; + u32 freq = 0; + u32 frequency = 0; + + spin_lock_irqsave(&chip->msg_lock, flags); + + lx_message_init(&chip->rmh, CMD_01_GET_SYS_CFG); + ret = lx_message_send_atomic(chip, &chip->rmh); + + if (ret == 0) { + freq_raw = chip->rmh.stat[0] >> FREQ_FIELD_OFFSET; + freq = freq_raw & XES_FREQ_COUNT8_MASK; + + if ((freq < XES_FREQ_COUNT8_48_MAX) || + (freq > XES_FREQ_COUNT8_44_MIN)) + frequency = 0; /* unknown */ + else if (freq >= XES_FREQ_COUNT8_44_MAX) + frequency = 44100; + else + frequency = 48000; + } + + spin_unlock_irqrestore(&chip->msg_lock, flags); + + *rfreq = frequency * chip->freq_ratio; + + return ret; +} + +int lx_dsp_get_mac(struct lx6464es *chip, u8 *mac_address) +{ + u32 macmsb, maclsb; + + macmsb = lx_dsp_reg_read(chip, eReg_ADMACESMSB) & 0x00FFFFFF; + maclsb = lx_dsp_reg_read(chip, eReg_ADMACESLSB) & 0x00FFFFFF; + + /* todo: endianess handling */ + mac_address[5] = ((u8 *)(&maclsb))[0]; + mac_address[4] = ((u8 *)(&maclsb))[1]; + mac_address[3] = ((u8 *)(&maclsb))[2]; + mac_address[2] = ((u8 *)(&macmsb))[0]; + mac_address[1] = ((u8 *)(&macmsb))[1]; + mac_address[0] = ((u8 *)(&macmsb))[2]; + + return 0; +} + + +int lx_dsp_set_granularity(struct lx6464es *chip, u32 gran) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&chip->msg_lock, flags); + + lx_message_init(&chip->rmh, CMD_02_SET_GRANULARITY); + chip->rmh.cmd[0] |= gran; + + ret = lx_message_send_atomic(chip, &chip->rmh); + spin_unlock_irqrestore(&chip->msg_lock, flags); + return ret; +} + +int lx_dsp_read_async_events(struct lx6464es *chip, u32 *data) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&chip->msg_lock, flags); + + lx_message_init(&chip->rmh, CMD_04_GET_EVENT); + chip->rmh.stat_len = 9; /* we don't necessarily need the full length */ + + ret = lx_message_send_atomic(chip, &chip->rmh); + + if (!ret) + memcpy(data, chip->rmh.stat, chip->rmh.stat_len * sizeof(u32)); + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return ret; +} + +#define CSES_TIMEOUT 100 /* microseconds */ +#define CSES_CE 0x0001 +#define CSES_BROADCAST 0x0002 +#define CSES_UPDATE_LDSV 0x0004 + +int lx_dsp_es_check_pipeline(struct lx6464es *chip) +{ + int i; + + for (i = 0; i != CSES_TIMEOUT; ++i) { + /* + * le bit CSES_UPDATE_LDSV est à 1 dés que le macprog + * est pret. il re-passe à 0 lorsque le premier read a + * été fait. pour l'instant on retire le test car ce bit + * passe a 1 environ 200 à 400 ms aprés que le registre + * confES à été écrit (kick du xilinx ES). + * + * On ne teste que le bit CE. + * */ + + u32 cses = lx_dsp_reg_read(chip, eReg_CSES); + + if ((cses & CSES_CE) == 0) + return 0; + + udelay(1); + } + + return -ETIMEDOUT; +} + + +#define PIPE_INFO_TO_CMD(capture, pipe) \ + ((u32)((u32)(pipe) | ((capture) ? ID_IS_CAPTURE : 0L)) << ID_OFFSET) + + + +/* low-level pipe handling */ +int lx_pipe_allocate(struct lx6464es *chip, u32 pipe, int is_capture, + int channels) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_06_ALLOCATE_PIPE); + + chip->rmh.cmd[0] |= pipe_cmd; + chip->rmh.cmd[0] |= channels; + + err = lx_message_send_atomic(chip, &chip->rmh); + spin_unlock_irqrestore(&chip->msg_lock, flags); + + if (err != 0) + snd_printk(KERN_ERR "lx6464es: could not allocate pipe\n"); + + return err; +} + +int lx_pipe_release(struct lx6464es *chip, u32 pipe, int is_capture) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_07_RELEASE_PIPE); + + chip->rmh.cmd[0] |= pipe_cmd; + + err = lx_message_send_atomic(chip, &chip->rmh); + spin_unlock_irqrestore(&chip->msg_lock, flags); + + return err; +} + +int lx_buffer_ask(struct lx6464es *chip, u32 pipe, int is_capture, + u32 *r_needed, u32 *r_freed, u32 *size_array) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + +#ifdef CONFIG_SND_DEBUG + if (size_array) + memset(size_array, 0, sizeof(u32)*MAX_STREAM_BUFFER); +#endif + + *r_needed = 0; + *r_freed = 0; + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_08_ASK_BUFFERS); + + chip->rmh.cmd[0] |= pipe_cmd; + + err = lx_message_send_atomic(chip, &chip->rmh); + + if (!err) { + int i; + for (i = 0; i < MAX_STREAM_BUFFER; ++i) { + u32 stat = chip->rmh.stat[i]; + if (stat & (BF_EOB << BUFF_FLAGS_OFFSET)) { + /* finished */ + *r_freed += 1; + if (size_array) + size_array[i] = stat & MASK_DATA_SIZE; + } else if ((stat & (BF_VALID << BUFF_FLAGS_OFFSET)) + == 0) + /* free */ + *r_needed += 1; + } + +#if 0 + snd_printdd(LXP "CMD_08_ASK_BUFFERS: needed %d, freed %d\n", + *r_needed, *r_freed); + for (i = 0; i < MAX_STREAM_BUFFER; ++i) { + for (i = 0; i != chip->rmh.stat_len; ++i) + snd_printdd(" stat[%d]: %x, %x\n", i, + chip->rmh.stat[i], + chip->rmh.stat[i] & MASK_DATA_SIZE); + } +#endif + } + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + + +int lx_pipe_stop(struct lx6464es *chip, u32 pipe, int is_capture) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_09_STOP_PIPE); + + chip->rmh.cmd[0] |= pipe_cmd; + + err = lx_message_send_atomic(chip, &chip->rmh); + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +static int lx_pipe_toggle_state(struct lx6464es *chip, u32 pipe, int is_capture) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_0B_TOGGLE_PIPE_STATE); + + chip->rmh.cmd[0] |= pipe_cmd; + + err = lx_message_send_atomic(chip, &chip->rmh); + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + + +int lx_pipe_start(struct lx6464es *chip, u32 pipe, int is_capture) +{ + int err; + + err = lx_pipe_wait_for_idle(chip, pipe, is_capture); + if (err < 0) + return err; + + err = lx_pipe_toggle_state(chip, pipe, is_capture); + + return err; +} + +int lx_pipe_pause(struct lx6464es *chip, u32 pipe, int is_capture) +{ + int err = 0; + + err = lx_pipe_wait_for_start(chip, pipe, is_capture); + if (err < 0) + return err; + + err = lx_pipe_toggle_state(chip, pipe, is_capture); + + return err; +} + + +int lx_pipe_sample_count(struct lx6464es *chip, u32 pipe, int is_capture, + u64 *rsample_count) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_0A_GET_PIPE_SPL_COUNT); + + chip->rmh.cmd[0] |= pipe_cmd; + chip->rmh.stat_len = 2; /* need all words here! */ + + err = lx_message_send_atomic(chip, &chip->rmh); /* don't sleep! */ + + if (err != 0) + snd_printk(KERN_ERR + "lx6464es: could not query pipe's sample count\n"); + else { + *rsample_count = ((u64)(chip->rmh.stat[0] & MASK_SPL_COUNT_HI) + << 24) /* hi part */ + + chip->rmh.stat[1]; /* lo part */ + } + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +int lx_pipe_state(struct lx6464es *chip, u32 pipe, int is_capture, u16 *rstate) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_0A_GET_PIPE_SPL_COUNT); + + chip->rmh.cmd[0] |= pipe_cmd; + + err = lx_message_send_atomic(chip, &chip->rmh); + + if (err != 0) + snd_printk(KERN_ERR "lx6464es: could not query pipe's state\n"); + else + *rstate = (chip->rmh.stat[0] >> PSTATE_OFFSET) & 0x0F; + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +static int lx_pipe_wait_for_state(struct lx6464es *chip, u32 pipe, + int is_capture, u16 state) +{ + int i; + + /* max 2*PCMOnlyGranularity = 2*1024 at 44100 = < 50 ms: + * timeout 50 ms */ + for (i = 0; i != 50; ++i) { + u16 current_state; + int err = lx_pipe_state(chip, pipe, is_capture, ¤t_state); + + if (err < 0) + return err; + + if (current_state == state) + return 0; + + mdelay(1); + } + + return -ETIMEDOUT; +} + +int lx_pipe_wait_for_start(struct lx6464es *chip, u32 pipe, int is_capture) +{ + return lx_pipe_wait_for_state(chip, pipe, is_capture, PSTATE_RUN); +} + +int lx_pipe_wait_for_idle(struct lx6464es *chip, u32 pipe, int is_capture) +{ + return lx_pipe_wait_for_state(chip, pipe, is_capture, PSTATE_IDLE); +} + +/* low-level stream handling */ +int lx_stream_set_state(struct lx6464es *chip, u32 pipe, + int is_capture, enum stream_state_t state) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_13_SET_STREAM_STATE); + + chip->rmh.cmd[0] |= pipe_cmd; + chip->rmh.cmd[0] |= state; + + err = lx_message_send_atomic(chip, &chip->rmh); + spin_unlock_irqrestore(&chip->msg_lock, flags); + + return err; +} + +int lx_stream_set_format(struct lx6464es *chip, struct snd_pcm_runtime *runtime, + u32 pipe, int is_capture) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + u32 channels = runtime->channels; + + if (runtime->channels != channels) + snd_printk(KERN_ERR LXP "channel count mismatch: %d vs %d", + runtime->channels, channels); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_0C_DEF_STREAM); + + chip->rmh.cmd[0] |= pipe_cmd; + + if (runtime->sample_bits == 16) + /* 16 bit format */ + chip->rmh.cmd[0] |= (STREAM_FMT_16b << STREAM_FMT_OFFSET); + + if (snd_pcm_format_little_endian(runtime->format)) + /* little endian/intel format */ + chip->rmh.cmd[0] |= (STREAM_FMT_intel << STREAM_FMT_OFFSET); + + chip->rmh.cmd[0] |= channels-1; + + err = lx_message_send_atomic(chip, &chip->rmh); + spin_unlock_irqrestore(&chip->msg_lock, flags); + + return err; +} + +int lx_stream_state(struct lx6464es *chip, u32 pipe, int is_capture, + int *rstate) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_0E_GET_STREAM_SPL_COUNT); + + chip->rmh.cmd[0] |= pipe_cmd; + + err = lx_message_send_atomic(chip, &chip->rmh); + + *rstate = (chip->rmh.stat[0] & SF_START) ? START_STATE : PAUSE_STATE; + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +int lx_stream_sample_position(struct lx6464es *chip, u32 pipe, int is_capture, + u64 *r_bytepos) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_0E_GET_STREAM_SPL_COUNT); + + chip->rmh.cmd[0] |= pipe_cmd; + + err = lx_message_send_atomic(chip, &chip->rmh); + + *r_bytepos = ((u64) (chip->rmh.stat[0] & MASK_SPL_COUNT_HI) + << 32) /* hi part */ + + chip->rmh.stat[1]; /* lo part */ + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +/* low-level buffer handling */ +int lx_buffer_give(struct lx6464es *chip, u32 pipe, int is_capture, + u32 buffer_size, u32 buf_address_lo, u32 buf_address_hi, + u32 *r_buffer_index) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_0F_UPDATE_BUFFER); + + chip->rmh.cmd[0] |= pipe_cmd; + chip->rmh.cmd[0] |= BF_NOTIFY_EOB; /* request interrupt notification */ + + /* todo: pause request, circular buffer */ + + chip->rmh.cmd[1] = buffer_size & MASK_DATA_SIZE; + chip->rmh.cmd[2] = buf_address_lo; + + if (buf_address_hi) { + chip->rmh.cmd_len = 4; + chip->rmh.cmd[3] = buf_address_hi; + chip->rmh.cmd[0] |= BF_64BITS_ADR; + } + + err = lx_message_send_atomic(chip, &chip->rmh); + + if (err == 0) { + *r_buffer_index = chip->rmh.stat[0]; + goto done; + } + + if (err == EB_RBUFFERS_TABLE_OVERFLOW) + snd_printk(LXP "lx_buffer_give EB_RBUFFERS_TABLE_OVERFLOW\n"); + + if (err == EB_INVALID_STREAM) + snd_printk(LXP "lx_buffer_give EB_INVALID_STREAM\n"); + + if (err == EB_CMD_REFUSED) + snd_printk(LXP "lx_buffer_give EB_CMD_REFUSED\n"); + + done: + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +int lx_buffer_free(struct lx6464es *chip, u32 pipe, int is_capture, + u32 *r_buffer_size) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_11_CANCEL_BUFFER); + + chip->rmh.cmd[0] |= pipe_cmd; + chip->rmh.cmd[0] |= MASK_BUFFER_ID; /* ask for the current buffer: the + * microblaze will seek for it */ + + err = lx_message_send_atomic(chip, &chip->rmh); + + if (err == 0) + *r_buffer_size = chip->rmh.stat[0] & MASK_DATA_SIZE; + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +int lx_buffer_cancel(struct lx6464es *chip, u32 pipe, int is_capture, + u32 buffer_index) +{ + int err; + unsigned long flags; + + u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe); + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_11_CANCEL_BUFFER); + + chip->rmh.cmd[0] |= pipe_cmd; + chip->rmh.cmd[0] |= buffer_index; + + err = lx_message_send_atomic(chip, &chip->rmh); + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + + +/* low-level gain/peak handling + * + * \todo: can we unmute capture/playback channels independently? + * + * */ +int lx_level_unmute(struct lx6464es *chip, int is_capture, int unmute) +{ + int err; + unsigned long flags; + + /* bit set to 1: channel muted */ + u64 mute_mask = unmute ? 0 : 0xFFFFFFFFFFFFFFFFLLU; + + spin_lock_irqsave(&chip->msg_lock, flags); + lx_message_init(&chip->rmh, CMD_0D_SET_MUTE); + + chip->rmh.cmd[0] |= PIPE_INFO_TO_CMD(is_capture, 0); + + chip->rmh.cmd[1] = (u32)(mute_mask >> (u64)32); /* hi part */ + chip->rmh.cmd[2] = (u32)(mute_mask & (u64)0xFFFFFFFF); /* lo part */ + + snd_printk("mute %x %x %x\n", chip->rmh.cmd[0], chip->rmh.cmd[1], + chip->rmh.cmd[2]); + + err = lx_message_send_atomic(chip, &chip->rmh); + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +static u32 peak_map[] = { + 0x00000109, /* -90.308dB */ + 0x0000083B, /* -72.247dB */ + 0x000020C4, /* -60.205dB */ + 0x00008273, /* -48.030dB */ + 0x00020756, /* -36.005dB */ + 0x00040C37, /* -30.001dB */ + 0x00081385, /* -24.002dB */ + 0x00101D3F, /* -18.000dB */ + 0x0016C310, /* -15.000dB */ + 0x002026F2, /* -12.001dB */ + 0x002D6A86, /* -9.000dB */ + 0x004026E6, /* -6.004dB */ + 0x005A9DF6, /* -3.000dB */ + 0x0065AC8B, /* -2.000dB */ + 0x00721481, /* -1.000dB */ + 0x007FFFFF, /* FS */ +}; + +int lx_level_peaks(struct lx6464es *chip, int is_capture, int channels, + u32 *r_levels) +{ + int err = 0; + unsigned long flags; + int i; + spin_lock_irqsave(&chip->msg_lock, flags); + + for (i = 0; i < channels; i += 4) { + u32 s0, s1, s2, s3; + + lx_message_init(&chip->rmh, CMD_12_GET_PEAK); + chip->rmh.cmd[0] |= PIPE_INFO_TO_CMD(is_capture, i); + + err = lx_message_send_atomic(chip, &chip->rmh); + + if (err == 0) { + s0 = peak_map[chip->rmh.stat[0] & 0x0F]; + s1 = peak_map[(chip->rmh.stat[0] >> 4) & 0xf]; + s2 = peak_map[(chip->rmh.stat[0] >> 8) & 0xf]; + s3 = peak_map[(chip->rmh.stat[0] >> 12) & 0xf]; + } else + s0 = s1 = s2 = s3 = 0; + + r_levels[0] = s0; + r_levels[1] = s1; + r_levels[2] = s2; + r_levels[3] = s3; + + r_levels += 4; + } + + spin_unlock_irqrestore(&chip->msg_lock, flags); + return err; +} + +/* interrupt handling */ +#define PCX_IRQ_NONE 0 +#define IRQCS_ACTIVE_PCIDB 0x00002000L /* Bit nø 13 */ +#define IRQCS_ENABLE_PCIIRQ 0x00000100L /* Bit nø 08 */ +#define IRQCS_ENABLE_PCIDB 0x00000200L /* Bit nø 09 */ + +static u32 lx_interrupt_test_ack(struct lx6464es *chip) +{ + u32 irqcs = lx_plx_reg_read(chip, ePLX_IRQCS); + + /* Test if PCI Doorbell interrupt is active */ + if (irqcs & IRQCS_ACTIVE_PCIDB) { + u32 temp; + irqcs = PCX_IRQ_NONE; + + while ((temp = lx_plx_reg_read(chip, ePLX_L2PCIDB))) { + /* RAZ interrupt */ + irqcs |= temp; + lx_plx_reg_write(chip, ePLX_L2PCIDB, temp); + } + + return irqcs; + } + return PCX_IRQ_NONE; +} + +static int lx_interrupt_ack(struct lx6464es *chip, u32 *r_irqsrc, + int *r_async_pending, int *r_async_escmd) +{ + u32 irq_async; + u32 irqsrc = lx_interrupt_test_ack(chip); + + if (irqsrc == PCX_IRQ_NONE) + return 0; + + *r_irqsrc = irqsrc; + + irq_async = irqsrc & MASK_SYS_ASYNC_EVENTS; /* + EtherSound response + * (set by xilinx) + EOB */ + + if (irq_async & MASK_SYS_STATUS_ESA) { + irq_async &= ~MASK_SYS_STATUS_ESA; + *r_async_escmd = 1; + } + + if (irqsrc & MASK_SYS_STATUS_CMD_DONE) + /* xilinx command notification */ + atomic_set(&chip->send_message_locked, 0); + + if (irq_async) { + /* snd_printd("interrupt: async event pending\n"); */ + *r_async_pending = 1; + } + + return 1; +} + +static int lx_interrupt_handle_async_events(struct lx6464es *chip, u32 irqsrc, + int *r_freq_changed, + u64 *r_notified_in_pipe_mask, + u64 *r_notified_out_pipe_mask) +{ + int err; + u32 stat[9]; /* answer from CMD_04_GET_EVENT */ + + /* On peut optimiser pour ne pas lire les evenements vides + * les mots de réponse sont dans l'ordre suivant : + * Stat[0] mot de status général + * Stat[1] fin de buffer OUT pF + * Stat[2] fin de buffer OUT pf + * Stat[3] fin de buffer IN pF + * Stat[4] fin de buffer IN pf + * Stat[5] underrun poid fort + * Stat[6] underrun poid faible + * Stat[7] overrun poid fort + * Stat[8] overrun poid faible + * */ + + u64 orun_mask; + u64 urun_mask; +#if 0 + int has_underrun = (irqsrc & MASK_SYS_STATUS_URUN) ? 1 : 0; + int has_overrun = (irqsrc & MASK_SYS_STATUS_ORUN) ? 1 : 0; +#endif + int eb_pending_out = (irqsrc & MASK_SYS_STATUS_EOBO) ? 1 : 0; + int eb_pending_in = (irqsrc & MASK_SYS_STATUS_EOBI) ? 1 : 0; + + *r_freq_changed = (irqsrc & MASK_SYS_STATUS_FREQ) ? 1 : 0; + + err = lx_dsp_read_async_events(chip, stat); + if (err < 0) + return err; + + if (eb_pending_in) { + *r_notified_in_pipe_mask = ((u64)stat[3] << 32) + + stat[4]; + snd_printdd(LXP "interrupt: EOBI pending %llx\n", + *r_notified_in_pipe_mask); + } + if (eb_pending_out) { + *r_notified_out_pipe_mask = ((u64)stat[1] << 32) + + stat[2]; + snd_printdd(LXP "interrupt: EOBO pending %llx\n", + *r_notified_out_pipe_mask); + } + + orun_mask = ((u64)stat[7] << 32) + stat[8]; + urun_mask = ((u64)stat[5] << 32) + stat[6]; + + /* todo: handle xrun notification */ + + return err; +} + +static int lx_interrupt_request_new_buffer(struct lx6464es *chip, + struct lx_stream *lx_stream) +{ + struct snd_pcm_substream *substream = lx_stream->stream; + int is_capture = lx_stream->is_capture; + int err; + unsigned long flags; + + const u32 channels = substream->runtime->channels; + const u32 bytes_per_frame = channels * 3; + const u32 period_size = substream->runtime->period_size; + const u32 period_bytes = period_size * bytes_per_frame; + const u32 pos = lx_stream->frame_pos; + const u32 next_pos = ((pos+1) == substream->runtime->periods) ? + 0 : pos + 1; + + dma_addr_t buf = substream->dma_buffer.addr + pos * period_bytes; + u32 buf_hi = 0; + u32 buf_lo = 0; + u32 buffer_index = 0; + + u32 needed, freed; + u32 size_array[MAX_STREAM_BUFFER]; + + snd_printdd("->lx_interrupt_request_new_buffer\n"); + + spin_lock_irqsave(&chip->lock, flags); + + err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, size_array); + snd_printdd(LXP "interrupt: needed %d, freed %d\n", needed, freed); + + unpack_pointer(buf, &buf_lo, &buf_hi); + err = lx_buffer_give(chip, 0, is_capture, period_bytes, buf_lo, buf_hi, + &buffer_index); + snd_printdd(LXP "interrupt: gave buffer index %x on %p (%d bytes)\n", + buffer_index, (void *)buf, period_bytes); + + lx_stream->frame_pos = next_pos; + spin_unlock_irqrestore(&chip->lock, flags); + + return err; +} + +void lx_tasklet_playback(unsigned long data) +{ + struct lx6464es *chip = (struct lx6464es *)data; + struct lx_stream *lx_stream = &chip->playback_stream; + int err; + + snd_printdd("->lx_tasklet_playback\n"); + + err = lx_interrupt_request_new_buffer(chip, lx_stream); + if (err < 0) + snd_printk(KERN_ERR LXP + "cannot request new buffer for playback\n"); + + snd_pcm_period_elapsed(lx_stream->stream); +} + +void lx_tasklet_capture(unsigned long data) +{ + struct lx6464es *chip = (struct lx6464es *)data; + struct lx_stream *lx_stream = &chip->capture_stream; + int err; + + snd_printdd("->lx_tasklet_capture\n"); + err = lx_interrupt_request_new_buffer(chip, lx_stream); + if (err < 0) + snd_printk(KERN_ERR LXP + "cannot request new buffer for capture\n"); + + snd_pcm_period_elapsed(lx_stream->stream); +} + + + +static int lx_interrupt_handle_audio_transfer(struct lx6464es *chip, + u64 notified_in_pipe_mask, + u64 notified_out_pipe_mask) +{ + int err = 0; + + if (notified_in_pipe_mask) { + snd_printdd(LXP "requesting audio transfer for capture\n"); + tasklet_hi_schedule(&chip->tasklet_capture); + } + + if (notified_out_pipe_mask) { + snd_printdd(LXP "requesting audio transfer for playback\n"); + tasklet_hi_schedule(&chip->tasklet_playback); + } + + return err; +} + + +irqreturn_t lx_interrupt(int irq, void *dev_id) +{ + struct lx6464es *chip = dev_id; + int async_pending, async_escmd; + u32 irqsrc; + + spin_lock(&chip->lock); + + snd_printdd("**************************************************\n"); + + if (!lx_interrupt_ack(chip, &irqsrc, &async_pending, &async_escmd)) { + spin_unlock(&chip->lock); + snd_printdd("IRQ_NONE\n"); + return IRQ_NONE; /* this device did not cause the interrupt */ + } + + if (irqsrc & MASK_SYS_STATUS_CMD_DONE) + goto exit; + +#if 0 + if (irqsrc & MASK_SYS_STATUS_EOBI) + snd_printdd(LXP "interrupt: EOBI\n"); + + if (irqsrc & MASK_SYS_STATUS_EOBO) + snd_printdd(LXP "interrupt: EOBO\n"); + + if (irqsrc & MASK_SYS_STATUS_URUN) + snd_printdd(LXP "interrupt: URUN\n"); + + if (irqsrc & MASK_SYS_STATUS_ORUN) + snd_printdd(LXP "interrupt: ORUN\n"); +#endif + + if (async_pending) { + u64 notified_in_pipe_mask = 0; + u64 notified_out_pipe_mask = 0; + int freq_changed; + int err; + + /* handle async events */ + err = lx_interrupt_handle_async_events(chip, irqsrc, + &freq_changed, + ¬ified_in_pipe_mask, + ¬ified_out_pipe_mask); + if (err) + snd_printk(KERN_ERR LXP + "error handling async events\n"); + + err = lx_interrupt_handle_audio_transfer(chip, + notified_in_pipe_mask, + notified_out_pipe_mask + ); + if (err) + snd_printk(KERN_ERR LXP + "error during audio transfer\n"); + } + + if (async_escmd) { +#if 0 + /* backdoor for ethersound commands + * + * for now, we do not need this + * + * */ + + snd_printdd("lx6464es: interrupt requests escmd handling\n"); +#endif + } + +exit: + spin_unlock(&chip->lock); + return IRQ_HANDLED; /* this device caused the interrupt */ +} + + +static void lx_irq_set(struct lx6464es *chip, int enable) +{ + u32 reg = lx_plx_reg_read(chip, ePLX_IRQCS); + + /* enable/disable interrupts + * + * Set the Doorbell and PCI interrupt enable bits + * + * */ + if (enable) + reg |= (IRQCS_ENABLE_PCIIRQ | IRQCS_ENABLE_PCIDB); + else + reg &= ~(IRQCS_ENABLE_PCIIRQ | IRQCS_ENABLE_PCIDB); + lx_plx_reg_write(chip, ePLX_IRQCS, reg); +} + +void lx_irq_enable(struct lx6464es *chip) +{ + snd_printdd("->lx_irq_enable\n"); + lx_irq_set(chip, 1); +} + +void lx_irq_disable(struct lx6464es *chip) +{ + snd_printdd("->lx_irq_disable\n"); + lx_irq_set(chip, 0); +} diff --git a/sound/pci/lx6464es/lx_core.h b/sound/pci/lx6464es/lx_core.h new file mode 100644 index 0000000..6bd9cbb --- /dev/null +++ b/sound/pci/lx6464es/lx_core.h @@ -0,0 +1,242 @@ +/* -*- linux-c -*- * + * + * ALSA driver for the digigram lx6464es interface + * low-level interface + * + * Copyright (c) 2009 Tim Blechmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * + */ + +#ifndef LX_CORE_H +#define LX_CORE_H + +#include + +#include "lx_defs.h" + +#define REG_CRM_NUMBER 12 + +struct lx6464es; + +/* low-level register access */ + +/* dsp register access */ +enum { + eReg_BASE, + eReg_CSM, + eReg_CRM1, + eReg_CRM2, + eReg_CRM3, + eReg_CRM4, + eReg_CRM5, + eReg_CRM6, + eReg_CRM7, + eReg_CRM8, + eReg_CRM9, + eReg_CRM10, + eReg_CRM11, + eReg_CRM12, + + eReg_ICR, + eReg_CVR, + eReg_ISR, + eReg_RXHTXH, + eReg_RXMTXM, + eReg_RHLTXL, + eReg_RESETDSP, + + eReg_CSUF, + eReg_CSES, + eReg_CRESMSB, + eReg_CRESLSB, + eReg_ADMACESMSB, + eReg_ADMACESLSB, + eReg_CONFES, + + eMaxPortLx +}; + +unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port); +void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len); +void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data); +void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data, + u32 len); + +/* plx register access */ +enum { + ePLX_PCICR, + + ePLX_MBOX0, + ePLX_MBOX1, + ePLX_MBOX2, + ePLX_MBOX3, + ePLX_MBOX4, + ePLX_MBOX5, + ePLX_MBOX6, + ePLX_MBOX7, + + ePLX_L2PCIDB, + ePLX_IRQCS, + ePLX_CHIPSC, + + eMaxPort +}; + +unsigned long lx_plx_reg_read(struct lx6464es *chip, int port); +void lx_plx_reg_write(struct lx6464es *chip, int port, u32 data); + +/* rhm */ +struct lx_rmh { + u16 cmd_len; /* length of the command to send (WORDs) */ + u16 stat_len; /* length of the status received (WORDs) */ + u16 dsp_stat; /* status type, RMP_SSIZE_XXX */ + u16 cmd_idx; /* index of the command */ + u32 cmd[REG_CRM_NUMBER]; + u32 stat[REG_CRM_NUMBER]; +}; + + +/* low-level dsp access */ +int __devinit lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version); +int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq); +int lx_dsp_set_granularity(struct lx6464es *chip, u32 gran); +int lx_dsp_read_async_events(struct lx6464es *chip, u32 *data); +int lx_dsp_get_mac(struct lx6464es *chip, u8 *mac_address); + + +/* low-level pipe handling */ +int lx_pipe_allocate(struct lx6464es *chip, u32 pipe, int is_capture, + int channels); +int lx_pipe_release(struct lx6464es *chip, u32 pipe, int is_capture); +int lx_pipe_sample_count(struct lx6464es *chip, u32 pipe, int is_capture, + u64 *rsample_count); +int lx_pipe_state(struct lx6464es *chip, u32 pipe, int is_capture, u16 *rstate); +int lx_pipe_stop(struct lx6464es *chip, u32 pipe, int is_capture); +int lx_pipe_start(struct lx6464es *chip, u32 pipe, int is_capture); +int lx_pipe_pause(struct lx6464es *chip, u32 pipe, int is_capture); + +int lx_pipe_wait_for_start(struct lx6464es *chip, u32 pipe, int is_capture); +int lx_pipe_wait_for_idle(struct lx6464es *chip, u32 pipe, int is_capture); + +/* low-level stream handling */ +int lx_stream_set_format(struct lx6464es *chip, struct snd_pcm_runtime *runtime, + u32 pipe, int is_capture); +int lx_stream_state(struct lx6464es *chip, u32 pipe, int is_capture, + int *rstate); +int lx_stream_sample_position(struct lx6464es *chip, u32 pipe, int is_capture, + u64 *r_bytepos); + +int lx_stream_set_state(struct lx6464es *chip, u32 pipe, + int is_capture, enum stream_state_t state); + +static inline int lx_stream_start(struct lx6464es *chip, u32 pipe, + int is_capture) +{ + snd_printdd("->lx_stream_start\n"); + return lx_stream_set_state(chip, pipe, is_capture, SSTATE_RUN); +} + +static inline int lx_stream_pause(struct lx6464es *chip, u32 pipe, + int is_capture) +{ + snd_printdd("->lx_stream_pause\n"); + return lx_stream_set_state(chip, pipe, is_capture, SSTATE_PAUSE); +} + +static inline int lx_stream_stop(struct lx6464es *chip, u32 pipe, + int is_capture) +{ + snd_printdd("->lx_stream_stop\n"); + return lx_stream_set_state(chip, pipe, is_capture, SSTATE_STOP); +} + +/* low-level buffer handling */ +int lx_buffer_ask(struct lx6464es *chip, u32 pipe, int is_capture, + u32 *r_needed, u32 *r_freed, u32 *size_array); +int lx_buffer_give(struct lx6464es *chip, u32 pipe, int is_capture, + u32 buffer_size, u32 buf_address_lo, u32 buf_address_hi, + u32 *r_buffer_index); +int lx_buffer_free(struct lx6464es *chip, u32 pipe, int is_capture, + u32 *r_buffer_size); +int lx_buffer_cancel(struct lx6464es *chip, u32 pipe, int is_capture, + u32 buffer_index); + +/* low-level gain/peak handling */ +int lx_level_unmute(struct lx6464es *chip, int is_capture, int unmute); +int lx_level_peaks(struct lx6464es *chip, int is_capture, int channels, + u32 *r_levels); + + +/* interrupt handling */ +irqreturn_t lx_interrupt(int irq, void *dev_id); +void lx_irq_enable(struct lx6464es *chip); +void lx_irq_disable(struct lx6464es *chip); + +void lx_tasklet_capture(unsigned long data); +void lx_tasklet_playback(unsigned long data); + + +/* Stream Format Header Defines (for LIN and IEEE754) */ +#define HEADER_FMT_BASE HEADER_FMT_BASE_LIN +#define HEADER_FMT_BASE_LIN 0xFED00000 +#define HEADER_FMT_BASE_FLOAT 0xFAD00000 +#define HEADER_FMT_MONO 0x00000080 /* bit 23 in header_lo. WARNING: old + * bit 22 is ignored in float + * format */ +#define HEADER_FMT_INTEL 0x00008000 +#define HEADER_FMT_16BITS 0x00002000 +#define HEADER_FMT_24BITS 0x00004000 +#define HEADER_FMT_UPTO11 0x00000200 /* frequency is less or equ. to 11k. + * */ +#define HEADER_FMT_UPTO32 0x00000100 /* frequency is over 11k and less + * then 32k.*/ + + +#define BIT_FMP_HEADER 23 +#define BIT_FMP_SD 22 +#define BIT_FMP_MULTICHANNEL 19 + +#define START_STATE 1 +#define PAUSE_STATE 0 + + + + + +/* from PcxAll_e.h */ +/* Start/Pause condition for pipes (PCXStartPipe, PCXPausePipe) */ +#define START_PAUSE_IMMEDIATE 0 +#define START_PAUSE_ON_SYNCHRO 1 +#define START_PAUSE_ON_TIME_CODE 2 + + +/* Pipe / Stream state */ +#define START_STATE 1 +#define PAUSE_STATE 0 + +static inline void unpack_pointer(dma_addr_t ptr, u32 *r_low, u32 *r_high) +{ + *r_low = (u32)(ptr & 0xffffffff); +#if BITS_PER_LONG == 32 + *r_high = 0; +#else + *r_high = (u32)((u64)ptr>>32); +#endif +} + +#endif /* LX_CORE_H */ diff --git a/sound/pci/lx6464es/lx_defs.h b/sound/pci/lx6464es/lx_defs.h new file mode 100644 index 0000000..49d36bd --- /dev/null +++ b/sound/pci/lx6464es/lx_defs.h @@ -0,0 +1,376 @@ +/* -*- linux-c -*- * + * + * ALSA driver for the digigram lx6464es interface + * adapted upstream headers + * + * Copyright (c) 2009 Tim Blechmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * + */ + +#ifndef LX_DEFS_H +#define LX_DEFS_H + +/* code adapted from ethersound.h */ +#define XES_FREQ_COUNT8_MASK 0x00001FFF /* compteur 25MHz entre 8 ech. */ +#define XES_FREQ_COUNT8_44_MIN 0x00001288 /* 25M / + * [ 44k - ( 44.1k + 48k ) / 2 ] + * * 8 */ +#define XES_FREQ_COUNT8_44_MAX 0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ] + * * 8 */ +#define XES_FREQ_COUNT8_48_MAX 0x00000F08 /* 25M / + * [ 48k + ( 44.1k + 48k ) / 2 ] + * * 8 */ + +/* code adapted from LXES_registers.h */ + +#define IOCR_OUTPUTS_OFFSET 0 /* (rw) offset for the number of OUTs in the + * ConfES register. */ +#define IOCR_INPUTS_OFFSET 8 /* (rw) offset for the number of INs in the + * ConfES register. */ +#define FREQ_RATIO_OFFSET 19 /* (rw) offset for frequency ratio in the + * ConfES register. */ +#define FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio: + * sample rate = frequency rate. */ + +#define CONFES_READ_PART_MASK 0x00070000 +#define CONFES_WRITE_PART_MASK 0x00F80000 + +/* code adapted from if_drv_mb.h */ + +#define MASK_SYS_STATUS_ERROR (1L << 31) /* events that lead to a PCI irq if + * not yet pending */ +#define MASK_SYS_STATUS_URUN (1L << 30) +#define MASK_SYS_STATUS_ORUN (1L << 29) +#define MASK_SYS_STATUS_EOBO (1L << 28) +#define MASK_SYS_STATUS_EOBI (1L << 27) +#define MASK_SYS_STATUS_FREQ (1L << 26) +#define MASK_SYS_STATUS_ESA (1L << 25) /* reserved, this is set by the + * XES */ +#define MASK_SYS_STATUS_TIMER (1L << 24) + +#define MASK_SYS_ASYNC_EVENTS (MASK_SYS_STATUS_ERROR | \ + MASK_SYS_STATUS_URUN | \ + MASK_SYS_STATUS_ORUN | \ + MASK_SYS_STATUS_EOBO | \ + MASK_SYS_STATUS_EOBI | \ + MASK_SYS_STATUS_FREQ | \ + MASK_SYS_STATUS_ESA) + +#define MASK_SYS_PCI_EVENTS (MASK_SYS_ASYNC_EVENTS | \ + MASK_SYS_STATUS_TIMER) + +#define MASK_SYS_TIMER_COUNT 0x0000FFFF + +#define MASK_SYS_STATUS_EOT_PLX (1L << 22) /* event that remains + * internal: reserved fo end + * of plx dma */ +#define MASK_SYS_STATUS_XES (1L << 21) /* event that remains + * internal: pending XES + * IRQ */ +#define MASK_SYS_STATUS_CMD_DONE (1L << 20) /* alternate command + * management: notify driver + * instead of polling */ + + +#define MAX_STREAM_BUFFER 5 /* max amount of stream buffers. */ + +#define MICROBLAZE_IBL_MIN 32 +#define MICROBLAZE_IBL_DEFAULT 128 +#define MICROBLAZE_IBL_MAX 512 +/* #define MASK_GRANULARITY (2*MICROBLAZE_IBL_MAX-1) */ + + + +/* command opcodes, see reference for details */ + +/* + the capture bit position in the object_id field in driver commands + depends upon the number of managed channels. For now, 64 IN + 64 OUT are + supported. HOwever, the communication protocol forsees 1024 channels, hence + bit 10 indicates a capture (input) object). +*/ +#define ID_IS_CAPTURE (1L << 10) +#define ID_OFFSET 13 /* object ID is at the 13th bit in the + * 1st command word.*/ +#define ID_CH_MASK 0x3F +#define OPCODE_OFFSET 24 /* offset of the command opcode in the first + * command word.*/ + +enum cmd_mb_opcodes { + CMD_00_INFO_DEBUG = 0x00, + CMD_01_GET_SYS_CFG = 0x01, + CMD_02_SET_GRANULARITY = 0x02, + CMD_03_SET_TIMER_IRQ = 0x03, + CMD_04_GET_EVENT = 0x04, + CMD_05_GET_PIPES = 0x05, + + CMD_06_ALLOCATE_PIPE = 0x06, + CMD_07_RELEASE_PIPE = 0x07, + CMD_08_ASK_BUFFERS = 0x08, + CMD_09_STOP_PIPE = 0x09, + CMD_0A_GET_PIPE_SPL_COUNT = 0x0a, + CMD_0B_TOGGLE_PIPE_STATE = 0x0b, + + CMD_0C_DEF_STREAM = 0x0c, + CMD_0D_SET_MUTE = 0x0d, + CMD_0E_GET_STREAM_SPL_COUNT = 0x0e, + CMD_0F_UPDATE_BUFFER = 0x0f, + CMD_10_GET_BUFFER = 0x10, + CMD_11_CANCEL_BUFFER = 0x11, + CMD_12_GET_PEAK = 0x12, + CMD_13_SET_STREAM_STATE = 0x13, + CMD_14_INVALID = 0x14, +}; + +/* pipe states */ +enum pipe_state_t { + PSTATE_IDLE = 0, /* the pipe is not processed in the XES_IRQ + * (free or stopped, or paused). */ + PSTATE_RUN = 1, /* sustained play/record state. */ + PSTATE_PURGE = 2, /* the ES channels are now off, render pipes do + * not DMA, record pipe do a last DMA. */ + PSTATE_ACQUIRE = 3, /* the ES channels are now on, render pipes do + * not yet increase their sample count, record + * pipes do not DMA. */ + PSTATE_CLOSING = 4, /* the pipe is releasing, and may not yet + * receive an "alloc" command. */ +}; + +/* stream states */ +enum stream_state_t { + SSTATE_STOP = 0x00, /* setting to stop resets the stream spl + * count.*/ + SSTATE_RUN = (0x01 << 0), /* start DMA and spl count handling. */ + SSTATE_PAUSE = (0x01 << 1), /* pause DMA and spl count handling. */ +}; + +/* buffer flags */ +enum buffer_flags { + BF_VALID = 0x80, /* set if the buffer is valid, clear if free.*/ + BF_CURRENT = 0x40, /* set if this is the current buffer (there is + * always a current buffer).*/ + BF_NOTIFY_EOB = 0x20, /* set if this buffer must cause a PCI event + * when finished.*/ + BF_CIRCULAR = 0x10, /* set if buffer[1] must be copied to buffer[0] + * by the end of this buffer.*/ + BF_64BITS_ADR = 0x08, /* set if the hi part of the address is valid.*/ + BF_xx = 0x04, /* future extension.*/ + BF_EOB = 0x02, /* set if finished, but not yet free.*/ + BF_PAUSE = 0x01, /* pause stream at buffer end.*/ + BF_ZERO = 0x00, /* no flags (init).*/ +}; + +/** +* Stream Flags definitions +*/ +enum stream_flags { + SF_ZERO = 0x00000000, /* no flags (stream invalid). */ + SF_VALID = 0x10000000, /* the stream has a valid DMA_conf + * info (setstreamformat). */ + SF_XRUN = 0x20000000, /* the stream is un x-run state. */ + SF_START = 0x40000000, /* the DMA is running.*/ + SF_ASIO = 0x80000000, /* ASIO.*/ +}; + + +#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */ +#define PSTATE_OFFSET 28 /* 4 MSBits are status bits */ + + +#define MASK_STREAM_HAS_MAPPING (1L << 12) +#define MASK_STREAM_IS_ASIO (1L << 9) +#define STREAM_FMT_OFFSET 10 /* the stream fmt bits start at the 10th + * bit in the command word. */ + +#define STREAM_FMT_16b 0x02 +#define STREAM_FMT_intel 0x01 + +#define FREQ_FIELD_OFFSET 15 /* offset of the freq field in the response + * word */ + +#define BUFF_FLAGS_OFFSET 24 /* offset of the buffer flags in the + * response word. */ +#define MASK_DATA_SIZE 0x00FFFFFF /* this must match the field size of + * datasize in the buffer_t structure. */ + +#define MASK_BUFFER_ID 0xFF /* the cancel command awaits a buffer ID, + * may be 0xFF for "current". */ + + +/* code adapted from PcxErr_e.h */ + +/* Bits masks */ + +#define ERROR_MASK 0x8000 + +#define SOURCE_MASK 0x7800 + +#define E_SOURCE_BOARD 0x4000 /* 8 >> 1 */ +#define E_SOURCE_DRV 0x2000 /* 4 >> 1 */ +#define E_SOURCE_API 0x1000 /* 2 >> 1 */ +/* Error tools */ +#define E_SOURCE_TOOLS 0x0800 /* 1 >> 1 */ +/* Error pcxaudio */ +#define E_SOURCE_AUDIO 0x1800 /* 3 >> 1 */ +/* Error virtual pcx */ +#define E_SOURCE_VPCX 0x2800 /* 5 >> 1 */ +/* Error dispatcher */ +#define E_SOURCE_DISPATCHER 0x3000 /* 6 >> 1 */ +/* Error from CobraNet firmware */ +#define E_SOURCE_COBRANET 0x3800 /* 7 >> 1 */ + +#define E_SOURCE_USER 0x7800 + +#define CLASS_MASK 0x0700 + +#define CODE_MASK 0x00FF + +/* Bits values */ + +/* Values for the error/warning bit */ +#define ERROR_VALUE 0x8000 +#define WARNING_VALUE 0x0000 + +/* Class values */ +#define E_CLASS_GENERAL 0x0000 +#define E_CLASS_INVALID_CMD 0x0100 +#define E_CLASS_INVALID_STD_OBJECT 0x0200 +#define E_CLASS_RSRC_IMPOSSIBLE 0x0300 +#define E_CLASS_WRONG_CONTEXT 0x0400 +#define E_CLASS_BAD_SPECIFIC_PARAMETER 0x0500 +#define E_CLASS_REAL_TIME_ERROR 0x0600 +#define E_CLASS_DIRECTSHOW 0x0700 +#define E_CLASS_FREE 0x0700 + + +/* Complete DRV error code for the general class */ +#define ED_GN (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL) +#define ED_CONCURRENCY (ED_GN | 0x01) +#define ED_DSP_CRASHED (ED_GN | 0x02) +#define ED_UNKNOWN_BOARD (ED_GN | 0x03) +#define ED_NOT_INSTALLED (ED_GN | 0x04) +#define ED_CANNOT_OPEN_SVC_MANAGER (ED_GN | 0x05) +#define ED_CANNOT_READ_REGISTRY (ED_GN | 0x06) +#define ED_DSP_VERSION_MISMATCH (ED_GN | 0x07) +#define ED_UNAVAILABLE_FEATURE (ED_GN | 0x08) +#define ED_CANCELLED (ED_GN | 0x09) +#define ED_NO_RESPONSE_AT_IRQA (ED_GN | 0x10) +#define ED_INVALID_ADDRESS (ED_GN | 0x11) +#define ED_DSP_CORRUPTED (ED_GN | 0x12) +#define ED_PENDING_OPERATION (ED_GN | 0x13) +#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE (ED_GN | 0x14) +#define ED_NET_REGISTER_ERROR (ED_GN | 0x15) +#define ED_NET_THREAD_ERROR (ED_GN | 0x16) +#define ED_NET_OPEN_ERROR (ED_GN | 0x17) +#define ED_NET_CLOSE_ERROR (ED_GN | 0x18) +#define ED_NET_NO_MORE_PACKET (ED_GN | 0x19) +#define ED_NET_NO_MORE_BUFFER (ED_GN | 0x1A) +#define ED_NET_SEND_ERROR (ED_GN | 0x1B) +#define ED_NET_RECEIVE_ERROR (ED_GN | 0x1C) +#define ED_NET_WRONG_MSG_SIZE (ED_GN | 0x1D) +#define ED_NET_WAIT_ERROR (ED_GN | 0x1E) +#define ED_NET_EEPROM_ERROR (ED_GN | 0x1F) +#define ED_INVALID_RS232_COM_NUMBER (ED_GN | 0x20) +#define ED_INVALID_RS232_INIT (ED_GN | 0x21) +#define ED_FILE_ERROR (ED_GN | 0x22) +#define ED_INVALID_GPIO_CMD (ED_GN | 0x23) +#define ED_RS232_ALREADY_OPENED (ED_GN | 0x24) +#define ED_RS232_NOT_OPENED (ED_GN | 0x25) +#define ED_GPIO_ALREADY_OPENED (ED_GN | 0x26) +#define ED_GPIO_NOT_OPENED (ED_GN | 0x27) +#define ED_REGISTRY_ERROR (ED_GN | 0x28) /* <- NCX */ +#define ED_INVALID_SERVICE (ED_GN | 0x29) /* <- NCX */ + +#define ED_READ_FILE_ALREADY_OPENED (ED_GN | 0x2a) /* <- Decalage + * pour RCX + * (old 0x28) + * */ +#define ED_READ_FILE_INVALID_COMMAND (ED_GN | 0x2b) /* ~ */ +#define ED_READ_FILE_INVALID_PARAMETER (ED_GN | 0x2c) /* ~ */ +#define ED_READ_FILE_ALREADY_CLOSED (ED_GN | 0x2d) /* ~ */ +#define ED_READ_FILE_NO_INFORMATION (ED_GN | 0x2e) /* ~ */ +#define ED_READ_FILE_INVALID_HANDLE (ED_GN | 0x2f) /* ~ */ +#define ED_READ_FILE_END_OF_FILE (ED_GN | 0x30) /* ~ */ +#define ED_READ_FILE_ERROR (ED_GN | 0x31) /* ~ */ + +#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour + * PCX (old 0x14) */ +#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */ +#define ED_DSP_CRASHED_EXC_ILLEGAL (ED_GN | 0x34) /* ~ */ +#define ED_DSP_CRASHED_EXC_TIMER_REENTRY (ED_GN | 0x35) /* ~ */ +#define ED_DSP_CRASHED_EXC_FATAL_ERROR (ED_GN | 0x36) /* ~ */ + +#define ED_FLASH_PCCARD_NOT_PRESENT (ED_GN | 0x37) + +#define ED_NO_CURRENT_CLOCK (ED_GN | 0x38) + +/* Complete DRV error code for real time class */ +#define ED_RT (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR) +#define ED_DSP_TIMED_OUT (ED_RT | 0x01) +#define ED_DSP_CHK_TIMED_OUT (ED_RT | 0x02) +#define ED_STREAM_OVERRUN (ED_RT | 0x03) +#define ED_DSP_BUSY (ED_RT | 0x04) +#define ED_DSP_SEMAPHORE_TIME_OUT (ED_RT | 0x05) +#define ED_BOARD_TIME_OUT (ED_RT | 0x06) +#define ED_XILINX_ERROR (ED_RT | 0x07) +#define ED_COBRANET_ITF_NOT_RESPONDING (ED_RT | 0x08) + +/* Complete BOARD error code for the invaid standard object class */ +#define EB_ISO (ERROR_VALUE | E_SOURCE_BOARD | \ + E_CLASS_INVALID_STD_OBJECT) +#define EB_INVALID_EFFECT (EB_ISO | 0x00) +#define EB_INVALID_PIPE (EB_ISO | 0x40) +#define EB_INVALID_STREAM (EB_ISO | 0x80) +#define EB_INVALID_AUDIO (EB_ISO | 0xC0) + +/* Complete BOARD error code for impossible resource allocation class */ +#define EB_RI (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE) +#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01) +#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE (EB_RI | 0x02) + +#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE \ + EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE +#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE \ + EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE + +#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE (EB_RI | 0x03) +#define EB_TOO_MANY_DIFFERED_CMD (EB_RI | 0x04) +#define EB_RBUFFERS_TABLE_OVERFLOW (EB_RI | 0x05) +#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE (EB_RI | 0x08) +#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE (EB_RI | 0x09) +#define EB_RBUFFER_NOT_AVAILABLE (EB_RI | 0x0A) +#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE (EB_RI | 0x0B) +#define EB_STATUS_DIALOG_IMPOSSIBLE (EB_RI | 0x1D) +#define EB_CONTROL_CMD_IMPOSSIBLE (EB_RI | 0x1E) +#define EB_STATUS_SEND_IMPOSSIBLE (EB_RI | 0x1F) +#define EB_ALLOCATE_PIPE_IMPOSSIBLE (EB_RI | 0x40) +#define EB_ALLOCATE_STREAM_IMPOSSIBLE (EB_RI | 0x80) +#define EB_ALLOCATE_AUDIO_IMPOSSIBLE (EB_RI | 0xC0) + +/* Complete BOARD error code for wrong call context class */ +#define EB_WCC (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT) +#define EB_CMD_REFUSED (EB_WCC | 0x00) +#define EB_START_STREAM_REFUSED (EB_WCC | 0xFC) +#define EB_SPC_REFUSED (EB_WCC | 0xFD) +#define EB_CSN_REFUSED (EB_WCC | 0xFE) +#define EB_CSE_REFUSED (EB_WCC | 0xFF) + + + + +#endif /* LX_DEFS_H */ diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c index c262049..3b5ca70 100644 --- a/sound/pci/oxygen/oxygen_pcm.c +++ b/sound/pci/oxygen/oxygen_pcm.c @@ -487,10 +487,14 @@ static int oxygen_hw_free(struct snd_pcm_substream *substream) { struct oxygen *chip = snd_pcm_substream_chip(substream); unsigned int channel = oxygen_substream_channel(substream); + unsigned int channel_mask = 1 << channel; spin_lock_irq(&chip->reg_lock); - chip->interrupt_mask &= ~(1 << channel); + chip->interrupt_mask &= ~channel_mask; oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, chip->interrupt_mask); + + oxygen_set_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask); + oxygen_clear_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask); spin_unlock_irq(&chip->reg_lock); return snd_pcm_lib_free_pages(substream); diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index bc5ce11..bf971f7 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -113,8 +113,8 @@ */ /* - * Xonar Essence STX - * ----------------- + * Xonar Essence ST (Deluxe)/STX + * ----------------------------- * * CMI8788: * @@ -180,6 +180,8 @@ enum { MODEL_DX, MODEL_HDAV, /* without daughterboard */ MODEL_HDAV_H6, /* with H6 daughterboard */ + MODEL_ST, + MODEL_ST_H6, MODEL_STX, }; @@ -188,8 +190,10 @@ static struct pci_device_id xonar_ids[] __devinitdata = { { OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX }, { OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X }, { OXYGEN_PCI_SUBID(0x1043, 0x8314), .driver_data = MODEL_HDAV }, + { OXYGEN_PCI_SUBID(0x1043, 0x8327), .driver_data = MODEL_DX }, { OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 }, { OXYGEN_PCI_SUBID(0x1043, 0x835c), .driver_data = MODEL_STX }, + { OXYGEN_PCI_SUBID(0x1043, 0x835d), .driver_data = MODEL_ST }, { OXYGEN_PCI_SUBID_BROKEN_EEPROM }, { } }; @@ -210,9 +214,9 @@ MODULE_DEVICE_TABLE(pci, xonar_ids); #define GPIO_DX_FRONT_PANEL 0x0002 #define GPIO_DX_INPUT_ROUTE 0x0100 -#define GPIO_HDAV_DB_MASK 0x0030 -#define GPIO_HDAV_DB_H6 0x0000 -#define GPIO_HDAV_DB_XX 0x0020 +#define GPIO_DB_MASK 0x0030 +#define GPIO_DB_H6 0x0000 +#define GPIO_DB_XX 0x0020 #define GPIO_ST_HP_REAR 0x0002 #define GPIO_ST_HP 0x0080 @@ -530,7 +534,7 @@ static void xonar_hdav_init(struct oxygen *chip) snd_component_add(chip->card, "CS5381"); } -static void xonar_stx_init(struct oxygen *chip) +static void xonar_st_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -539,12 +543,11 @@ static void xonar_stx_init(struct oxygen *chip) OXYGEN_2WIRE_INTERRUPT_MASK | OXYGEN_2WIRE_SPEED_FAST); + if (chip->model.private_data == MODEL_ST_H6) + chip->model.dac_channels = 8; data->anti_pop_delay = 100; - data->dacs = 1; + data->dacs = chip->model.private_data == MODEL_ST_H6 ? 4 : 1; data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE; - data->ext_power_reg = OXYGEN_GPI_DATA; - data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; - data->ext_power_bit = GPI_DX_EXT_POWER; data->pcm1796_oversampling = PCM1796_OS_64; pcm1796_init(chip); @@ -560,6 +563,17 @@ static void xonar_stx_init(struct oxygen *chip) snd_component_add(chip->card, "CS5381"); } +static void xonar_stx_init(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + data->ext_power_reg = OXYGEN_GPI_DATA; + data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; + data->ext_power_bit = GPI_DX_EXT_POWER; + + xonar_st_init(chip); +} + static void xonar_disable_output(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -1021,7 +1035,8 @@ static const struct oxygen_model model_xonar_hdav = { .model_data_size = sizeof(struct xonar_data), .device_config = PLAYBACK_0_TO_I2S | PLAYBACK_1_TO_SPDIF | - CAPTURE_0_FROM_I2S_2, + CAPTURE_0_FROM_I2S_2 | + CAPTURE_1_FROM_SPDIF, .dac_channels = 8, .dac_volume_min = 255 - 2*60, .dac_volume_max = 255, @@ -1034,7 +1049,7 @@ static const struct oxygen_model model_xonar_hdav = { static const struct oxygen_model model_xonar_st = { .longname = "Asus Virtuoso 100", .chip = "AV200", - .init = xonar_stx_init, + .init = xonar_st_init, .control_filter = xonar_st_control_filter, .mixer_init = xonar_st_mixer_init, .cleanup = xonar_st_cleanup, @@ -1067,6 +1082,7 @@ static int __devinit get_xonar_model(struct oxygen *chip, [MODEL_D2] = &model_xonar_d2, [MODEL_D2X] = &model_xonar_d2, [MODEL_HDAV] = &model_xonar_hdav, + [MODEL_ST] = &model_xonar_st, [MODEL_STX] = &model_xonar_st, }; static const char *const names[] = { @@ -1076,6 +1092,8 @@ static int __devinit get_xonar_model(struct oxygen *chip, [MODEL_D2X] = "Xonar D2X", [MODEL_HDAV] = "Xonar HDAV1.3", [MODEL_HDAV_H6] = "Xonar HDAV1.3+H6", + [MODEL_ST] = "Xonar Essence ST", + [MODEL_ST_H6] = "Xonar Essence ST+H6", [MODEL_STX] = "Xonar Essence STX", }; unsigned int model = id->driver_data; @@ -1092,21 +1110,27 @@ static int __devinit get_xonar_model(struct oxygen *chip, chip->model.init = xonar_dx_init; break; case MODEL_HDAV: - oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, - GPIO_HDAV_DB_MASK); - switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & - GPIO_HDAV_DB_MASK) { - case GPIO_HDAV_DB_H6: + oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK); + switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) { + case GPIO_DB_H6: model = MODEL_HDAV_H6; break; - case GPIO_HDAV_DB_XX: + case GPIO_DB_XX: snd_printk(KERN_ERR "unknown daughterboard\n"); return -ENODEV; } break; + case MODEL_ST: + oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK); + switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) { + case GPIO_DB_H6: + model = MODEL_ST_H6; + break; + } + break; case MODEL_STX: - oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, - GPIO_HDAV_DB_MASK); + chip->model.init = xonar_stx_init; + oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK); break; } diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index e51a5ef..235a71e 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -507,41 +507,19 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip); */ static struct pci_device_id snd_riptide_ids[] = { - { - .vendor = 0x127a,.device = 0x4310, - .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID, - }, - { - .vendor = 0x127a,.device = 0x4320, - .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID, - }, - { - .vendor = 0x127a,.device = 0x4330, - .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID, - }, - { - .vendor = 0x127a,.device = 0x4340, - .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID, - }, + { PCI_DEVICE(0x127a, 0x4310) }, + { PCI_DEVICE(0x127a, 0x4320) }, + { PCI_DEVICE(0x127a, 0x4330) }, + { PCI_DEVICE(0x127a, 0x4340) }, {0,}, }; #ifdef SUPPORT_JOYSTICK static struct pci_device_id snd_riptide_joystick_ids[] __devinitdata = { - { - .vendor = 0x127a,.device = 0x4312, - .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID, - }, - { - .vendor = 0x127a,.device = 0x4322, - .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID, - }, - {.vendor = 0x127a,.device = 0x4332, - .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID, - }, - {.vendor = 0x127a,.device = 0x4342, - .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID, - }, + { PCI_DEVICE(0x127a, 0x4312) }, + { PCI_DEVICE(0x127a, 0x4322) }, + { PCI_DEVICE(0x127a, 0x4332) }, + { PCI_DEVICE(0x127a, 0x4342) }, {0,}, }; #endif @@ -1209,12 +1187,79 @@ static int riptide_resume(struct pci_dev *pci) } #endif +static int try_to_load_firmware(struct cmdif *cif, struct snd_riptide *chip) +{ + union firmware_version firmware = { .ret = CMDRET_ZERO }; + int i, timeout, err; + + for (i = 0; i < 2; i++) { + WRITE_PORT_ULONG(cif->hwport->port[i].data1, 0); + WRITE_PORT_ULONG(cif->hwport->port[i].data2, 0); + } + SET_GRESET(cif->hwport); + udelay(100); + UNSET_GRESET(cif->hwport); + udelay(100); + + for (timeout = 100000; --timeout; udelay(10)) { + if (IS_READY(cif->hwport) && !IS_GERR(cif->hwport)) + break; + } + if (!timeout) { + snd_printk(KERN_ERR + "Riptide: device not ready, audio status: 0x%x " + "ready: %d gerr: %d\n", + READ_AUDIO_STATUS(cif->hwport), + IS_READY(cif->hwport), IS_GERR(cif->hwport)); + return -EIO; + } else { + snd_printdd + ("Riptide: audio status: 0x%x ready: %d gerr: %d\n", + READ_AUDIO_STATUS(cif->hwport), + IS_READY(cif->hwport), IS_GERR(cif->hwport)); + } + + SEND_GETV(cif, &firmware.ret); + snd_printdd("Firmware version: ASIC: %d CODEC %d AUXDSP %d PROG %d\n", + firmware.firmware.ASIC, firmware.firmware.CODEC, + firmware.firmware.AUXDSP, firmware.firmware.PROG); + + for (i = 0; i < FIRMWARE_VERSIONS; i++) { + if (!memcmp(&firmware_versions[i], &firmware, sizeof(firmware))) + break; + } + if (i >= FIRMWARE_VERSIONS) + return 0; /* no match */ + + if (!chip) + return 1; /* OK */ + + snd_printdd("Writing Firmware\n"); + if (!chip->fw_entry) { + err = request_firmware(&chip->fw_entry, "riptide.hex", + &chip->pci->dev); + if (err) { + snd_printk(KERN_ERR + "Riptide: Firmware not available %d\n", err); + return -EIO; + } + } + err = loadfirmware(cif, chip->fw_entry->data, chip->fw_entry->size); + if (err) { + snd_printk(KERN_ERR + "Riptide: Could not load firmware %d\n", err); + return err; + } + + chip->firmware = firmware; + + return 1; /* OK */ +} + static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip) { - int timeout, tries; union cmdret rptr = CMDRET_ZERO; - union firmware_version firmware; - int i, j, err, has_firmware; + int err, tries; if (!cif) return -EINVAL; @@ -1227,75 +1272,11 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip) cif->is_reset = 0; tries = RESET_TRIES; - has_firmware = 0; - while (has_firmware == 0 && tries-- > 0) { - for (i = 0; i < 2; i++) { - WRITE_PORT_ULONG(cif->hwport->port[i].data1, 0); - WRITE_PORT_ULONG(cif->hwport->port[i].data2, 0); - } - SET_GRESET(cif->hwport); - udelay(100); - UNSET_GRESET(cif->hwport); - udelay(100); - - for (timeout = 100000; --timeout; udelay(10)) { - if (IS_READY(cif->hwport) && !IS_GERR(cif->hwport)) - break; - } - if (timeout == 0) { - snd_printk(KERN_ERR - "Riptide: device not ready, audio status: 0x%x ready: %d gerr: %d\n", - READ_AUDIO_STATUS(cif->hwport), - IS_READY(cif->hwport), IS_GERR(cif->hwport)); - return -EIO; - } else { - snd_printdd - ("Riptide: audio status: 0x%x ready: %d gerr: %d\n", - READ_AUDIO_STATUS(cif->hwport), - IS_READY(cif->hwport), IS_GERR(cif->hwport)); - } - - SEND_GETV(cif, &rptr); - for (i = 0; i < 4; i++) - firmware.ret.retwords[i] = rptr.retwords[i]; - - snd_printdd - ("Firmware version: ASIC: %d CODEC %d AUXDSP %d PROG %d\n", - firmware.firmware.ASIC, firmware.firmware.CODEC, - firmware.firmware.AUXDSP, firmware.firmware.PROG); - - for (j = 0; j < FIRMWARE_VERSIONS; j++) { - has_firmware = 1; - for (i = 0; i < 4; i++) { - if (firmware_versions[j].ret.retwords[i] != - firmware.ret.retwords[i]) - has_firmware = 0; - } - if (has_firmware) - break; - } - - if (chip != NULL && has_firmware == 0) { - snd_printdd("Writing Firmware\n"); - if (!chip->fw_entry) { - if ((err = - request_firmware(&chip->fw_entry, - "riptide.hex", - &chip->pci->dev)) != 0) { - snd_printk(KERN_ERR - "Riptide: Firmware not available %d\n", - err); - return -EIO; - } - } - err = loadfirmware(cif, chip->fw_entry->data, - chip->fw_entry->size); - if (err) - snd_printk(KERN_ERR - "Riptide: Could not load firmware %d\n", - err); - } - } + do { + err = try_to_load_firmware(cif, chip); + if (err < 0) + return err; + } while (!err && --tries); SEND_SACR(cif, 0, AC97_RESET); SEND_RACR(cif, AC97_RESET, &rptr); @@ -1337,11 +1318,6 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip) SET_AIE(cif->hwport); SET_AIACK(cif->hwport); cif->is_reset = 1; - if (chip) { - for (i = 0; i < 4; i++) - chip->firmware.ret.retwords[i] = - firmware.ret.retwords[i]; - } return 0; } @@ -2038,14 +2014,12 @@ static int __devinit snd_riptide_mixer(struct snd_riptide *chip) } #ifdef SUPPORT_JOYSTICK -static int have_joystick; -static struct pci_dev *riptide_gameport_pci; -static struct gameport *riptide_gameport; static int __devinit snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id) { static int dev; + struct gameport *gameport; if (dev >= SNDRV_CARDS) return -ENODEV; @@ -2054,36 +2028,33 @@ snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id) return -ENOENT; } - if (joystick_port[dev]) { - riptide_gameport = gameport_allocate_port(); - if (riptide_gameport) { - if (!request_region - (joystick_port[dev], 8, "Riptide gameport")) { - snd_printk(KERN_WARNING - "Riptide: cannot grab gameport 0x%x\n", - joystick_port[dev]); - gameport_free_port(riptide_gameport); - riptide_gameport = NULL; - } else { - riptide_gameport_pci = pci; - riptide_gameport->io = joystick_port[dev]; - gameport_register_port(riptide_gameport); - } - } + if (!joystick_port[dev++]) + return 0; + + gameport = gameport_allocate_port(); + if (!gameport) + return -ENOMEM; + if (!request_region(joystick_port[dev], 8, "Riptide gameport")) { + snd_printk(KERN_WARNING + "Riptide: cannot grab gameport 0x%x\n", + joystick_port[dev]); + gameport_free_port(gameport); + return -EBUSY; } - dev++; + + gameport->io = joystick_port[dev]; + gameport_register_port(gameport); + pci_set_drvdata(pci, gameport); return 0; } static void __devexit snd_riptide_joystick_remove(struct pci_dev *pci) { - if (riptide_gameport) { - if (riptide_gameport_pci == pci) { - release_region(riptide_gameport->io, 8); - riptide_gameport_pci = NULL; - gameport_unregister_port(riptide_gameport); - riptide_gameport = NULL; - } + struct gameport *gameport = pci_get_drvdata(pci); + if (gameport) { + release_region(gameport->io, 8); + gameport_unregister_port(gameport); + pci_set_drvdata(pci, NULL); } } #endif @@ -2094,8 +2065,8 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) static int dev; struct snd_card *card; struct snd_riptide *chip; - unsigned short addr; - int err = 0; + unsigned short val; + int err; if (dev >= SNDRV_CARDS) return -ENODEV; @@ -2107,60 +2078,63 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); if (err < 0) return err; - if ((err = snd_riptide_create(card, pci, &chip)) < 0) { - snd_card_free(card); - return err; - } + err = snd_riptide_create(card, pci, &chip); + if (err < 0) + goto error; card->private_data = chip; - if ((err = snd_riptide_pcm(chip, 0, NULL)) < 0) { - snd_card_free(card); - return err; - } - if ((err = snd_riptide_mixer(chip)) < 0) { - snd_card_free(card); - return err; - } - pci_write_config_word(chip->pci, PCI_EXT_Legacy_Mask, LEGACY_ENABLE_ALL - | (opl3_port[dev] ? LEGACY_ENABLE_FM : 0) + err = snd_riptide_pcm(chip, 0, NULL); + if (err < 0) + goto error; + err = snd_riptide_mixer(chip); + if (err < 0) + goto error; + + val = LEGACY_ENABLE_ALL; + if (opl3_port[dev]) + val |= LEGACY_ENABLE_FM; #ifdef SUPPORT_JOYSTICK - | (joystick_port[dev] ? LEGACY_ENABLE_GAMEPORT : - 0) + if (joystick_port[dev]) + val |= LEGACY_ENABLE_GAMEPORT; #endif - | (mpu_port[dev] - ? (LEGACY_ENABLE_MPU_INT | LEGACY_ENABLE_MPU) : - 0) - | ((chip->irq << 4) & 0xF0)); - if ((addr = mpu_port[dev]) != 0) { - pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, addr); - if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE, - addr, 0, chip->irq, 0, - &chip->rmidi)) < 0) + if (mpu_port[dev]) + val |= LEGACY_ENABLE_MPU_INT | LEGACY_ENABLE_MPU; + val |= (chip->irq << 4) & 0xf0; + pci_write_config_word(chip->pci, PCI_EXT_Legacy_Mask, val); + if (mpu_port[dev]) { + val = mpu_port[dev]; + pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, val); + err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE, + val, 0, chip->irq, 0, + &chip->rmidi); + if (err < 0) snd_printk(KERN_WARNING "Riptide: Can't Allocate MPU at 0x%x\n", - addr); + val); else - chip->mpuaddr = addr; + chip->mpuaddr = val; } - if ((addr = opl3_port[dev]) != 0) { - pci_write_config_word(chip->pci, PCI_EXT_FM_Base, addr); - if ((err = snd_opl3_create(card, addr, addr + 2, - OPL3_HW_RIPTIDE, 0, - &chip->opl3)) < 0) + if (opl3_port[dev]) { + val = opl3_port[dev]; + pci_write_config_word(chip->pci, PCI_EXT_FM_Base, val); + err = snd_opl3_create(card, val, val + 2, + OPL3_HW_RIPTIDE, 0, &chip->opl3); + if (err < 0) snd_printk(KERN_WARNING "Riptide: Can't Allocate OPL3 at 0x%x\n", - addr); + val); else { - chip->opladdr = addr; - if ((err = - snd_opl3_hwdep_new(chip->opl3, 0, 1, NULL)) < 0) + chip->opladdr = val; + err = snd_opl3_hwdep_new(chip->opl3, 0, 1, NULL); + if (err < 0) snd_printk(KERN_WARNING "Riptide: Can't Allocate OPL3-HWDEP\n"); } } #ifdef SUPPORT_JOYSTICK - if ((addr = joystick_port[dev]) != 0) { - pci_write_config_word(chip->pci, PCI_EXT_Game_Base, addr); - chip->gameaddr = addr; + if (joystick_port[dev]) { + val = joystick_port[dev]; + pci_write_config_word(chip->pci, PCI_EXT_Game_Base, val); + chip->gameaddr = val; } #endif @@ -2178,13 +2152,16 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) chip->opladdr); #endif snd_riptide_proc_init(chip); - if ((err = snd_card_register(card)) < 0) { - snd_card_free(card); - return err; - } + err = snd_card_register(card); + if (err < 0) + goto error; pci_set_drvdata(pci, card); dev++; return 0; + + error: + snd_card_free(card); + return err; } static void __devexit snd_card_riptide_remove(struct pci_dev *pci) @@ -2216,14 +2193,11 @@ static struct pci_driver joystick_driver = { static int __init alsa_card_riptide_init(void) { int err; - if ((err = pci_register_driver(&driver)) < 0) + err = pci_register_driver(&driver); + if (err < 0) return err; #if defined(SUPPORT_JOYSTICK) - if (pci_register_driver(&joystick_driver) < 0) { - have_joystick = 0; - snd_printk(KERN_INFO "no joystick found\n"); - } else - have_joystick = 1; + pci_register_driver(&joystick_driver); #endif return 0; } @@ -2232,8 +2206,7 @@ static void __exit alsa_card_riptide_exit(void) { pci_unregister_driver(&driver); #if defined(SUPPORT_JOYSTICK) - if (have_joystick) - pci_unregister_driver(&joystick_driver); + pci_unregister_driver(&joystick_driver); #endif } diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index 314e735..3da5c02 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -402,9 +403,9 @@ MODULE_FIRMWARE("digiface_firmware_rev11.bin"); #define HDSP_DMA_AREA_BYTES ((HDSP_MAX_CHANNELS+1) * HDSP_CHANNEL_BUFFER_BYTES) #define HDSP_DMA_AREA_KILOBYTES (HDSP_DMA_AREA_BYTES/1024) -/* use hotplug firmeare loader? */ +/* use hotplug firmware loader? */ #if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) -#if !defined(HDSP_USE_HWDEP_LOADER) && !defined(CONFIG_SND_HDSP) +#if !defined(HDSP_USE_HWDEP_LOADER) #define HDSP_FW_LOADER #endif #endif @@ -1047,7 +1048,6 @@ static int hdsp_set_interrupt_interval(struct hdsp *s, unsigned int frames) static void hdsp_set_dds_value(struct hdsp *hdsp, int rate) { u64 n; - u32 r; if (rate >= 112000) rate /= 4; @@ -1055,7 +1055,7 @@ static void hdsp_set_dds_value(struct hdsp *hdsp, int rate) rate /= 2; n = DDS_NUMERATOR; - div64_32(&n, rate, &r); + n = div_u64(n, rate); /* n should be less than 2^32 for being written to FREQ register */ snd_BUG_ON(n >> 32); /* HDSP_freqReg and HDSP_resetPointer are the same, so keep the DDS @@ -3097,7 +3097,6 @@ static int snd_hdsp_get_adat_sync_check(struct snd_kcontrol *kcontrol, struct sn static int hdsp_dds_offset(struct hdsp *hdsp) { u64 n; - u32 r; unsigned int dds_value = hdsp->dds_value; int system_sample_rate = hdsp->system_sample_rate; @@ -3109,7 +3108,7 @@ static int hdsp_dds_offset(struct hdsp *hdsp) * dds_value = n / rate * rate = n / dds_value */ - div64_32(&n, dds_value, &r); + n = div_u64(n, dds_value); if (system_sample_rate >= 112000) n *= 4; else if (system_sample_rate >= 56000) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index bac2dc0..0dce331 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -831,7 +832,6 @@ static int hdspm_set_interrupt_interval(struct hdspm * s, unsigned int frames) static void hdspm_set_dds_value(struct hdspm *hdspm, int rate) { u64 n; - u32 r; if (rate >= 112000) rate /= 4; @@ -844,7 +844,7 @@ static void hdspm_set_dds_value(struct hdspm *hdspm, int rate) */ /* n = 104857600000000ULL; */ /* = 2^20 * 10^8 */ n = 110100480000000ULL; /* Value checked for AES32 and MADI */ - div64_32(&n, rate, &r); + n = div_u64(n, rate); /* n should be less than 2^32 for being written to FREQ register */ snd_BUG_ON(n >> 32); hdspm_write(hdspm, HDSPM_freqReg, (u32)n); diff --git a/sound/pci/sis7019.h b/sound/pci/sis7019.h index 013b673..bc8c768 100644 --- a/sound/pci/sis7019.h +++ b/sound/pci/sis7019.h @@ -203,7 +203,7 @@ #define SIS_WEISR_B 0xac -/* Playback DMA parameters (paramter RAM) */ +/* Playback DMA parameters (parameter RAM) */ #define SIS_PLAY_DMA_OFFSET 0x0000 #define SIS_PLAY_DMA_SIZE 0x10 #define SIS_PLAY_DMA_ADDR(addr, num) \ @@ -228,7 +228,7 @@ #define SIS_PLAY_DMA_SSO_MASK 0xffff0000 #define SIS_PLAY_DMA_ESO_MASK 0x0000ffff -/* Capture DMA parameters (paramter RAM) */ +/* Capture DMA parameters (parameter RAM) */ #define SIS_CAPTURE_DMA_OFFSET 0x0800 #define SIS_CAPTURE_DMA_SIZE 0x10 #define SIS_CAPTURE_DMA_ADDR(addr, num) \ diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c index c0efe44..6416d3f 100644 --- a/sound/pci/vx222/vx222_ops.c +++ b/sound/pci/vx222/vx222_ops.c @@ -367,7 +367,7 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x unsigned int port; const unsigned char *image; - /* XILINX reset (wait at least 1 milisecond between reset on and off). */ + /* XILINX reset (wait at least 1 millisecond between reset on and off). */ vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK); vx_inl(chip, CNTRL); msleep(10); diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 80df9b1..2cc0eda 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -477,7 +477,7 @@ static int snd_pmac_awacs_put_master_amp(struct snd_kcontrol *kcontrol, #define AMP_CH_SPK 0 #define AMP_CH_HD 1 -static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __devinitdata = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "PC Speaker Playback Volume", .info = snd_pmac_awacs_info_volume_amp, @@ -514,7 +514,7 @@ static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __initdata = { }, }; -static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Headphone Playback Switch", .info = snd_pmac_boolean_stereo_info, @@ -523,7 +523,7 @@ static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __initdata = { .private_value = AMP_CH_HD, }; -static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "PC Speaker Playback Switch", .info = snd_pmac_boolean_stereo_info, @@ -595,46 +595,46 @@ static int snd_pmac_screamer_mic_boost_put(struct snd_kcontrol *kcontrol, /* * lists of mixer elements */ -static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __devinitdata = { AWACS_SWITCH("Master Capture Switch", 1, SHIFT_LOOPTHRU, 0), AWACS_VOLUME("Master Capture Volume", 0, 4, 0), /* AWACS_SWITCH("Unknown Playback Switch", 6, SHIFT_PAROUT0, 0), */ }; -static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __initdata = { +static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __devinitdata = { AWACS_VOLUME("Master Playback Volume", 2, 6, 1), AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1), AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_LINE, 0), }; -static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __initdata = { +static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __devinitdata = { AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), }; -static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = { +static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __devinitdata = { AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), }; -static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __initdata = { +static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __devinitdata = { AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), AWACS_VOLUME("Master Playback Volume", 5, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), }; -static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __devinitdata = { AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), }; -static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __devinitdata = { AWACS_VOLUME("Headphone Playback Volume", 2, 6, 1), }; -static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __devinitdata = { AWACS_VOLUME("Master Playback Volume", 2, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), }; @@ -642,34 +642,34 @@ static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = { /* FIXME: is this correct order? * screamer (powerbook G3 pismo) seems to have different bits... */ -static struct snd_kcontrol_new snd_pmac_awacs_mixers2[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_mixers2[] __devinitdata = { AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_LINE, 0), AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_MIC, 0), }; -static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __initdata = { +static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __devinitdata = { AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_LINE, 0), }; -static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __devinitdata = { AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), }; -static struct snd_kcontrol_new snd_pmac_awacs_master_sw __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_master_sw __devinitdata = AWACS_SWITCH("Master Playback Switch", 1, SHIFT_HDMUTE, 1); -static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __devinitdata = AWACS_SWITCH("Line out Playback Switch", 1, SHIFT_HDMUTE, 1); -static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __devinitdata = AWACS_SWITCH("Headphone Playback Switch", 1, SHIFT_HDMUTE, 1); -static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __devinitdata = { AWACS_SWITCH("Mic Boost Capture Switch", 0, SHIFT_GAINLINE, 0), }; -static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __initdata = { +static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __devinitdata = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Mic Boost Capture Volume", .info = snd_pmac_screamer_mic_boost_info, @@ -678,34 +678,34 @@ static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __initdata = { }, }; -static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __devinitdata = { AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0), }; -static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __initdata = +static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __devinitdata = { AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0), AWACS_SWITCH("CD Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0), }; -static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __initdata = +static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __devinitdata = { AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0), AWACS_SWITCH("Mic Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0), }; -static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __initdata = { +static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __devinitdata = { AWACS_VOLUME("PC Speaker Playback Volume", 4, 6, 1), }; -static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __devinitdata = AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1); -static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __devinitdata = AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1); -static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __devinitdata = AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0); @@ -872,7 +872,7 @@ static void snd_pmac_awacs_update_automute(struct snd_pmac *chip, int do_notify) /* * initialize chip */ -int __init +int __devinit snd_pmac_awacs_init(struct snd_pmac *chip) { int pm7500 = IS_PM7500; diff --git a/sound/ppc/beep.c b/sound/ppc/beep.c index 89f5c32..a9d3507 100644 --- a/sound/ppc/beep.c +++ b/sound/ppc/beep.c @@ -215,7 +215,7 @@ static struct snd_kcontrol_new snd_pmac_beep_mixer = { }; /* Initialize beep stuff */ -int __init snd_pmac_attach_beep(struct snd_pmac *chip) +int __devinit snd_pmac_attach_beep(struct snd_pmac *chip) { struct pmac_beep *beep; struct input_dev *input_dev; diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c index 45a7629..16ed240 100644 --- a/sound/ppc/burgundy.c +++ b/sound/ppc/burgundy.c @@ -46,12 +46,12 @@ snd_pmac_burgundy_extend_wait(struct snd_pmac *chip) timeout = 50; while (!(in_le32(&chip->awacs->codec_stat) & MASK_EXTEND) && timeout--) udelay(1); - if (! timeout) + if (timeout < 0) printk(KERN_DEBUG "burgundy_extend_wait: timeout #1\n"); timeout = 50; while ((in_le32(&chip->awacs->codec_stat) & MASK_EXTEND) && timeout--) udelay(1); - if (! timeout) + if (timeout < 0) printk(KERN_DEBUG "burgundy_extend_wait: timeout #2\n"); } @@ -468,7 +468,7 @@ static int snd_pmac_burgundy_put_switch_b(struct snd_kcontrol *kcontrol, /* * Burgundy mixers */ -static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __initdata = { +static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __devinitdata = { BURGUNDY_VOLUME_W("Master Playback Volume", 0, MASK_ADDR_BURGUNDY_MASTER_VOLUME, 8), BURGUNDY_VOLUME_W("CD Capture Volume", 0, @@ -496,7 +496,7 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __initdata = { */ BURGUNDY_SWITCH_B("PCM Capture Switch", 0, MASK_ADDR_BURGUNDY_HOSTIFEH, 0x01, 0, 0) }; -static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __initdata = { +static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __devinitdata = { BURGUNDY_VOLUME_W("Line in Capture Volume", 0, MASK_ADDR_BURGUNDY_VOLLINE, 16), BURGUNDY_VOLUME_W("Mic Capture Volume", 0, @@ -522,7 +522,7 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __initdata = { BURGUNDY_SWITCH_B("Mic Boost Capture Switch", 0, MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1) }; -static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __initdata = { +static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __devinitdata = { BURGUNDY_VOLUME_W("Line in Capture Volume", 0, MASK_ADDR_BURGUNDY_VOLMIC, 16), BURGUNDY_VOLUME_B("Line in Gain Capture Volume", 0, @@ -538,33 +538,33 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __initdata = { /* BURGUNDY_SWITCH_B("Line in Boost Capture Switch", 0, * MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1) */ }; -static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __initdata = +static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __devinitdata = BURGUNDY_SWITCH_B("Master Playback Switch", 0, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, BURGUNDY_OUTPUT_LEFT | BURGUNDY_LINEOUT_LEFT | BURGUNDY_HP_LEFT, BURGUNDY_OUTPUT_RIGHT | BURGUNDY_LINEOUT_RIGHT | BURGUNDY_HP_RIGHT, 1); -static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __initdata = +static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __devinitdata = BURGUNDY_SWITCH_B("Master Playback Switch", 0, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, BURGUNDY_OUTPUT_INTERN | BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1); -static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __initdata = +static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __devinitdata = BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1); -static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __initdata = +static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __devinitdata = BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, BURGUNDY_OUTPUT_INTERN, 0, 0); -static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __initdata = +static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __devinitdata = BURGUNDY_SWITCH_B("Line out Playback Switch", 0, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, BURGUNDY_LINEOUT_LEFT, BURGUNDY_LINEOUT_RIGHT, 1); -static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __initdata = +static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __devinitdata = BURGUNDY_SWITCH_B("Line out Playback Switch", 0, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1); -static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __initdata = +static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __devinitdata = BURGUNDY_SWITCH_B("Headphone Playback Switch", 0, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, BURGUNDY_HP_LEFT, BURGUNDY_HP_RIGHT, 1); @@ -618,7 +618,7 @@ static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_noti /* * initialize burgundy */ -int __init snd_pmac_burgundy_init(struct snd_pmac *chip) +int __devinit snd_pmac_burgundy_init(struct snd_pmac *chip) { int imac = machine_is_compatible("iMac"); int i, err; diff --git a/sound/ppc/daca.c b/sound/ppc/daca.c index f8d478c..24200b7 100644 --- a/sound/ppc/daca.c +++ b/sound/ppc/daca.c @@ -244,7 +244,7 @@ static void daca_cleanup(struct snd_pmac *chip) } /* exported */ -int __init snd_pmac_daca_init(struct snd_pmac *chip) +int __devinit snd_pmac_daca_init(struct snd_pmac *chip) { int i, err; struct pmac_daca *mix; diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c index a5afb26..835fa19 100644 --- a/sound/ppc/keywest.c +++ b/sound/ppc/keywest.c @@ -33,10 +33,6 @@ static struct pmac_keywest *keywest_ctx; -#ifndef i2c_device_name -#define i2c_device_name(x) ((x)->name) -#endif - static int keywest_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -56,7 +52,7 @@ static int keywest_attach_adapter(struct i2c_adapter *adapter) if (! keywest_ctx) return -EINVAL; - if (strncmp(i2c_device_name(adapter), "mac-io", 6)) + if (strncmp(adapter->name, "mac-io", 6)) return 0; /* ignored */ memset(&info, 0, sizeof(struct i2c_board_info)); @@ -109,7 +105,7 @@ void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c) } } -int __init snd_pmac_tumbler_post_init(void) +int __devinit snd_pmac_tumbler_post_init(void) { int err; @@ -124,7 +120,7 @@ int __init snd_pmac_tumbler_post_init(void) } /* exported */ -int __init snd_pmac_keywest_init(struct pmac_keywest *i2c) +int __devinit snd_pmac_keywest_init(struct pmac_keywest *i2c) { int err; diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c index 9b4e9c3..7bc492e 100644 --- a/sound/ppc/pmac.c +++ b/sound/ppc/pmac.c @@ -702,7 +702,7 @@ static struct snd_pcm_ops snd_pmac_capture_ops = { .pointer = snd_pmac_capture_pointer, }; -int __init snd_pmac_pcm_new(struct snd_pmac *chip) +int __devinit snd_pmac_pcm_new(struct snd_pmac *chip) { struct snd_pcm *pcm; int err; @@ -908,7 +908,7 @@ static int snd_pmac_dev_free(struct snd_device *device) * check the machine support byteswap (little-endian) */ -static void __init detect_byte_swap(struct snd_pmac *chip) +static void __devinit detect_byte_swap(struct snd_pmac *chip) { struct device_node *mio; @@ -934,7 +934,7 @@ static void __init detect_byte_swap(struct snd_pmac *chip) /* * detect a sound chip */ -static int __init snd_pmac_detect(struct snd_pmac *chip) +static int __devinit snd_pmac_detect(struct snd_pmac *chip) { struct device_node *sound; struct device_node *dn; @@ -1143,7 +1143,7 @@ static int pmac_hp_detect_get(struct snd_kcontrol *kcontrol, return 0; } -static struct snd_kcontrol_new auto_mute_controls[] __initdata = { +static struct snd_kcontrol_new auto_mute_controls[] __devinitdata = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Auto Mute Switch", .info = snd_pmac_boolean_mono_info, @@ -1158,7 +1158,7 @@ static struct snd_kcontrol_new auto_mute_controls[] __initdata = { }, }; -int __init snd_pmac_add_automute(struct snd_pmac *chip) +int __devinit snd_pmac_add_automute(struct snd_pmac *chip) { int err; chip->auto_mute = 1; @@ -1175,7 +1175,7 @@ int __init snd_pmac_add_automute(struct snd_pmac *chip) /* * create and detect a pmac chip record */ -int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return) +int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return) { struct snd_pmac *chip; struct device_node *np; diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index f361c26..53c81a5 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -18,81 +18,31 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include +#include #include -#include -#include #include +#include +#include + +#include +#include #include #include -#include -#include #include +#include #include -#include -#include -#include -#include + #include +#include #include #include #include -#include "snd_ps3_reg.h" #include "snd_ps3.h" - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("PS3 sound driver"); -MODULE_AUTHOR("Sony Computer Entertainment Inc."); - -/* module entries */ -static int __init snd_ps3_init(void); -static void __exit snd_ps3_exit(void); - -/* ALSA snd driver ops */ -static int snd_ps3_pcm_open(struct snd_pcm_substream *substream); -static int snd_ps3_pcm_close(struct snd_pcm_substream *substream); -static int snd_ps3_pcm_prepare(struct snd_pcm_substream *substream); -static int snd_ps3_pcm_trigger(struct snd_pcm_substream *substream, - int cmd); -static snd_pcm_uframes_t snd_ps3_pcm_pointer(struct snd_pcm_substream - *substream); -static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params); -static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream); - - -/* ps3_system_bus_driver entries */ -static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev); -static int snd_ps3_driver_remove(struct ps3_system_bus_device *dev); - -/* address setup */ -static int snd_ps3_map_mmio(void); -static void snd_ps3_unmap_mmio(void); -static int snd_ps3_allocate_irq(void); -static void snd_ps3_free_irq(void); -static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start); - -/* interrupt handler */ -static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id); - - -/* set sampling rate/format */ -static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream); -/* take effect parameter change */ -static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card); -/* initialize avsetting and take it effect */ -static int snd_ps3_init_avsetting(struct snd_ps3_card_info *card); -/* setup dma */ -static int snd_ps3_program_dma(struct snd_ps3_card_info *card, - enum snd_ps3_dma_filltype filltype); -static void snd_ps3_wait_for_dma_stop(struct snd_ps3_card_info *card); - -static dma_addr_t v_to_bus(struct snd_ps3_card_info *, void *vaddr, int ch); +#include "snd_ps3_reg.h" -module_init(snd_ps3_init); -module_exit(snd_ps3_exit); - /* * global */ @@ -165,25 +115,13 @@ static const struct snd_pcm_hardware snd_ps3_pcm_hw = { .fifo_size = PS3_AUDIO_FIFO_SIZE }; -static struct snd_pcm_ops snd_ps3_pcm_spdif_ops = -{ - .open = snd_ps3_pcm_open, - .close = snd_ps3_pcm_close, - .prepare = snd_ps3_pcm_prepare, - .ioctl = snd_pcm_lib_ioctl, - .trigger = snd_ps3_pcm_trigger, - .pointer = snd_ps3_pcm_pointer, - .hw_params = snd_ps3_pcm_hw_params, - .hw_free = snd_ps3_pcm_hw_free -}; - static int snd_ps3_verify_dma_stop(struct snd_ps3_card_info *card, int count, int force_stop) { int dma_ch, done, retries, stop_forced = 0; uint32_t status; - for (dma_ch = 0; dma_ch < 8; dma_ch ++) { + for (dma_ch = 0; dma_ch < 8; dma_ch++) { retries = count; do { status = read_reg(PS3_AUDIO_KICK(dma_ch)) & @@ -259,9 +197,7 @@ static void snd_ps3_kick_dma(struct snd_ps3_card_info *card) /* * convert virtual addr to ioif bus addr. */ -static dma_addr_t v_to_bus(struct snd_ps3_card_info *card, - void * paddr, - int ch) +static dma_addr_t v_to_bus(struct snd_ps3_card_info *card, void *paddr, int ch) { return card->dma_start_bus_addr[ch] + (paddr - card->dma_start_vaddr[ch]); @@ -321,7 +257,7 @@ static int snd_ps3_program_dma(struct snd_ps3_card_info *card, spin_lock_irqsave(&card->dma_lock, irqsave); for (ch = 0; ch < 2; ch++) { start_vaddr = card->dma_next_transfer_vaddr[0]; - for (stage = 0; stage < fill_stages; stage ++) { + for (stage = 0; stage < fill_stages; stage++) { dma_ch = stage * 2 + ch; if (silent) dma_addr = card->null_buffer_start_dma_addr; @@ -372,6 +308,71 @@ static int snd_ps3_program_dma(struct snd_ps3_card_info *card, } /* + * Interrupt handler + */ +static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id) +{ + + uint32_t port_intr; + int underflow_occured = 0; + struct snd_ps3_card_info *card = dev_id; + + if (!card->running) { + update_reg(PS3_AUDIO_AX_IS, 0); + update_reg(PS3_AUDIO_INTR_0, 0); + return IRQ_HANDLED; + } + + port_intr = read_reg(PS3_AUDIO_AX_IS); + /* + *serial buffer empty detected (every 4 times), + *program next dma and kick it + */ + if (port_intr & PS3_AUDIO_AX_IE_ASOBEIE(0)) { + write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBEIE(0)); + if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) { + write_reg(PS3_AUDIO_AX_IS, port_intr); + underflow_occured = 1; + } + if (card->silent) { + /* we are still in silent time */ + snd_ps3_program_dma(card, + (underflow_occured) ? + SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL : + SND_PS3_DMA_FILLTYPE_SILENT_RUNNING); + snd_ps3_kick_dma(card); + card->silent--; + } else { + snd_ps3_program_dma(card, + (underflow_occured) ? + SND_PS3_DMA_FILLTYPE_FIRSTFILL : + SND_PS3_DMA_FILLTYPE_RUNNING); + snd_ps3_kick_dma(card); + snd_pcm_period_elapsed(card->substream); + } + } else if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) { + write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBUIE(0)); + /* + * serial out underflow, but buffer empty not detected. + * in this case, fill fifo with 0 to recover. After + * filling dummy data, serial automatically start to + * consume them and then will generate normal buffer + * empty interrupts. + * If both buffer underflow and buffer empty are occured, + * it is better to do nomal data transfer than empty one + */ + snd_ps3_program_dma(card, + SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL); + snd_ps3_kick_dma(card); + snd_ps3_program_dma(card, + SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL); + snd_ps3_kick_dma(card); + } + /* clear interrupt cause */ + return IRQ_HANDLED; +}; + +/* * audio mute on/off * mute_on : 0 output enabled * 1 mute @@ -382,6 +383,142 @@ static int snd_ps3_mute(int mute_on) } /* + * av setting + * NOTE: calling this function may generate audio interrupt. + */ +static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card) +{ + int ret, retries, i; + pr_debug("%s: start\n", __func__); + + ret = ps3av_set_audio_mode(card->avs.avs_audio_ch, + card->avs.avs_audio_rate, + card->avs.avs_audio_width, + card->avs.avs_audio_format, + card->avs.avs_audio_source); + /* + * Reset the following unwanted settings: + */ + + /* disable all 3wire buffers */ + update_mask_reg(PS3_AUDIO_AO_3WMCTRL, + ~(PS3_AUDIO_AO_3WMCTRL_ASOEN(0) | + PS3_AUDIO_AO_3WMCTRL_ASOEN(1) | + PS3_AUDIO_AO_3WMCTRL_ASOEN(2) | + PS3_AUDIO_AO_3WMCTRL_ASOEN(3)), + 0); + wmb(); /* ensure the hardware sees the change */ + /* wait for actually stopped */ + retries = 1000; + while ((read_reg(PS3_AUDIO_AO_3WMCTRL) & + (PS3_AUDIO_AO_3WMCTRL_ASORUN(0) | + PS3_AUDIO_AO_3WMCTRL_ASORUN(1) | + PS3_AUDIO_AO_3WMCTRL_ASORUN(2) | + PS3_AUDIO_AO_3WMCTRL_ASORUN(3))) && + --retries) { + udelay(1); + } + + /* reset buffer pointer */ + for (i = 0; i < 4; i++) { + update_reg(PS3_AUDIO_AO_3WCTRL(i), + PS3_AUDIO_AO_3WCTRL_ASOBRST_RESET); + udelay(10); + } + wmb(); /* ensure the hardware actually start resetting */ + + /* enable 3wire#0 buffer */ + update_reg(PS3_AUDIO_AO_3WMCTRL, PS3_AUDIO_AO_3WMCTRL_ASOEN(0)); + + + /* In 24bit mode,ALSA inserts a zero byte at first byte of per sample */ + update_mask_reg(PS3_AUDIO_AO_3WCTRL(0), + ~PS3_AUDIO_AO_3WCTRL_ASODF, + PS3_AUDIO_AO_3WCTRL_ASODF_LSB); + update_mask_reg(PS3_AUDIO_AO_SPDCTRL(0), + ~PS3_AUDIO_AO_SPDCTRL_SPODF, + PS3_AUDIO_AO_SPDCTRL_SPODF_LSB); + /* ensure all the setting above is written back to register */ + wmb(); + /* avsetting driver altered AX_IE, caller must reset it if you want */ + pr_debug("%s: end\n", __func__); + return ret; +} + +/* + * set sampling rate according to the substream + */ +static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream) +{ + struct snd_ps3_card_info *card = snd_pcm_substream_chip(substream); + struct snd_ps3_avsetting_info avs; + int ret; + + avs = card->avs; + + pr_debug("%s: called freq=%d width=%d\n", __func__, + substream->runtime->rate, + snd_pcm_format_width(substream->runtime->format)); + + pr_debug("%s: before freq=%d width=%d\n", __func__, + card->avs.avs_audio_rate, card->avs.avs_audio_width); + + /* sample rate */ + switch (substream->runtime->rate) { + case 44100: + avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_44K; + break; + case 48000: + avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K; + break; + case 88200: + avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_88K; + break; + case 96000: + avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_96K; + break; + default: + pr_info("%s: invalid rate %d\n", __func__, + substream->runtime->rate); + return 1; + } + + /* width */ + switch (snd_pcm_format_width(substream->runtime->format)) { + case 16: + avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16; + break; + case 24: + avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_24; + break; + default: + pr_info("%s: invalid width %d\n", __func__, + snd_pcm_format_width(substream->runtime->format)); + return 1; + } + + memcpy(avs.avs_cs_info, ps3av_mode_cs_info, 8); + + if (memcmp(&card->avs, &avs, sizeof(avs))) { + pr_debug("%s: after freq=%d width=%d\n", __func__, + card->avs.avs_audio_rate, card->avs.avs_audio_width); + + card->avs = avs; + snd_ps3_change_avsetting(card); + ret = 0; + } else + ret = 1; + + /* check CS non-audio bit and mute accordingly */ + if (avs.avs_cs_info[0] & 0x02) + ps3av_audio_mute_analog(1); /* mute if non-audio */ + else + ps3av_audio_mute_analog(0); + + return ret; +} + +/* * PCM operators */ static int snd_ps3_pcm_open(struct snd_pcm_substream *substream) @@ -406,6 +543,13 @@ static int snd_ps3_pcm_open(struct snd_pcm_substream *substream) return 0; }; +static int snd_ps3_pcm_close(struct snd_pcm_substream *substream) +{ + /* mute on */ + snd_ps3_mute(1); + return 0; +}; + static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { @@ -417,6 +561,13 @@ static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream, return 0; }; +static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream) +{ + int ret; + ret = snd_pcm_lib_free_pages(substream); + return ret; +}; + static int snd_ps3_delay_to_bytes(struct snd_pcm_substream *substream, unsigned int delay_ms) { @@ -556,202 +707,6 @@ static snd_pcm_uframes_t snd_ps3_pcm_pointer( return ret; }; -static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream) -{ - int ret; - ret = snd_pcm_lib_free_pages(substream); - return ret; -}; - -static int snd_ps3_pcm_close(struct snd_pcm_substream *substream) -{ - /* mute on */ - snd_ps3_mute(1); - return 0; -}; - -static void snd_ps3_audio_fixup(struct snd_ps3_card_info *card) -{ - /* - * avsetting driver seems to never change the followings - * so, init them here once - */ - - /* no dma interrupt needed */ - write_reg(PS3_AUDIO_INTR_EN_0, 0); - - /* use every 4 buffer empty interrupt */ - update_mask_reg(PS3_AUDIO_AX_IC, - PS3_AUDIO_AX_IC_AASOIMD_MASK, - PS3_AUDIO_AX_IC_AASOIMD_EVERY4); - - /* enable 3wire clocks */ - update_mask_reg(PS3_AUDIO_AO_3WMCTRL, - ~(PS3_AUDIO_AO_3WMCTRL_ASOBCLKD_DISABLED | - PS3_AUDIO_AO_3WMCTRL_ASOLRCKD_DISABLED), - 0); - update_reg(PS3_AUDIO_AO_3WMCTRL, - PS3_AUDIO_AO_3WMCTRL_ASOPLRCK_DEFAULT); -} - -/* - * av setting - * NOTE: calling this function may generate audio interrupt. - */ -static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card) -{ - int ret, retries, i; - pr_debug("%s: start\n", __func__); - - ret = ps3av_set_audio_mode(card->avs.avs_audio_ch, - card->avs.avs_audio_rate, - card->avs.avs_audio_width, - card->avs.avs_audio_format, - card->avs.avs_audio_source); - /* - * Reset the following unwanted settings: - */ - - /* disable all 3wire buffers */ - update_mask_reg(PS3_AUDIO_AO_3WMCTRL, - ~(PS3_AUDIO_AO_3WMCTRL_ASOEN(0) | - PS3_AUDIO_AO_3WMCTRL_ASOEN(1) | - PS3_AUDIO_AO_3WMCTRL_ASOEN(2) | - PS3_AUDIO_AO_3WMCTRL_ASOEN(3)), - 0); - wmb(); /* ensure the hardware sees the change */ - /* wait for actually stopped */ - retries = 1000; - while ((read_reg(PS3_AUDIO_AO_3WMCTRL) & - (PS3_AUDIO_AO_3WMCTRL_ASORUN(0) | - PS3_AUDIO_AO_3WMCTRL_ASORUN(1) | - PS3_AUDIO_AO_3WMCTRL_ASORUN(2) | - PS3_AUDIO_AO_3WMCTRL_ASORUN(3))) && - --retries) { - udelay(1); - } - - /* reset buffer pointer */ - for (i = 0; i < 4; i++) { - update_reg(PS3_AUDIO_AO_3WCTRL(i), - PS3_AUDIO_AO_3WCTRL_ASOBRST_RESET); - udelay(10); - } - wmb(); /* ensure the hardware actually start resetting */ - - /* enable 3wire#0 buffer */ - update_reg(PS3_AUDIO_AO_3WMCTRL, PS3_AUDIO_AO_3WMCTRL_ASOEN(0)); - - - /* In 24bit mode,ALSA inserts a zero byte at first byte of per sample */ - update_mask_reg(PS3_AUDIO_AO_3WCTRL(0), - ~PS3_AUDIO_AO_3WCTRL_ASODF, - PS3_AUDIO_AO_3WCTRL_ASODF_LSB); - update_mask_reg(PS3_AUDIO_AO_SPDCTRL(0), - ~PS3_AUDIO_AO_SPDCTRL_SPODF, - PS3_AUDIO_AO_SPDCTRL_SPODF_LSB); - /* ensure all the setting above is written back to register */ - wmb(); - /* avsetting driver altered AX_IE, caller must reset it if you want */ - pr_debug("%s: end\n", __func__); - return ret; -} - -static int snd_ps3_init_avsetting(struct snd_ps3_card_info *card) -{ - int ret; - pr_debug("%s: start\n", __func__); - card->avs.avs_audio_ch = PS3AV_CMD_AUDIO_NUM_OF_CH_2; - card->avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K; - card->avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16; - card->avs.avs_audio_format = PS3AV_CMD_AUDIO_FORMAT_PCM; - card->avs.avs_audio_source = PS3AV_CMD_AUDIO_SOURCE_SERIAL; - memcpy(card->avs.avs_cs_info, ps3av_mode_cs_info, 8); - - ret = snd_ps3_change_avsetting(card); - - snd_ps3_audio_fixup(card); - - /* to start to generate SPDIF signal, fill data */ - snd_ps3_program_dma(card, SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL); - snd_ps3_kick_dma(card); - pr_debug("%s: end\n", __func__); - return ret; -} - -/* - * set sampling rate according to the substream - */ -static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream) -{ - struct snd_ps3_card_info *card = snd_pcm_substream_chip(substream); - struct snd_ps3_avsetting_info avs; - int ret; - - avs = card->avs; - - pr_debug("%s: called freq=%d width=%d\n", __func__, - substream->runtime->rate, - snd_pcm_format_width(substream->runtime->format)); - - pr_debug("%s: before freq=%d width=%d\n", __func__, - card->avs.avs_audio_rate, card->avs.avs_audio_width); - - /* sample rate */ - switch (substream->runtime->rate) { - case 44100: - avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_44K; - break; - case 48000: - avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K; - break; - case 88200: - avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_88K; - break; - case 96000: - avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_96K; - break; - default: - pr_info("%s: invalid rate %d\n", __func__, - substream->runtime->rate); - return 1; - } - - /* width */ - switch (snd_pcm_format_width(substream->runtime->format)) { - case 16: - avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16; - break; - case 24: - avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_24; - break; - default: - pr_info("%s: invalid width %d\n", __func__, - snd_pcm_format_width(substream->runtime->format)); - return 1; - } - - memcpy(avs.avs_cs_info, ps3av_mode_cs_info, 8); - - if (memcmp(&card->avs, &avs, sizeof(avs))) { - pr_debug("%s: after freq=%d width=%d\n", __func__, - card->avs.avs_audio_rate, card->avs.avs_audio_width); - - card->avs = avs; - snd_ps3_change_avsetting(card); - ret = 0; - } else - ret = 1; - - /* check CS non-audio bit and mute accordingly */ - if (avs.avs_cs_info[0] & 0x02) - ps3av_audio_mute_analog(1); /* mute if non-audio */ - else - ps3av_audio_mute_analog(0); - - return ret; -} - /* * SPDIF status bits controls */ @@ -798,28 +753,39 @@ static struct snd_kcontrol_new spdif_ctls[] = { { .access = SNDRV_CTL_ELEM_ACCESS_READ, .iface = SNDRV_CTL_ELEM_IFACE_PCM, - .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK), .info = snd_ps3_spdif_mask_info, .get = snd_ps3_spdif_cmask_get, }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, .iface = SNDRV_CTL_ELEM_IFACE_PCM, - .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK), .info = snd_ps3_spdif_mask_info, .get = snd_ps3_spdif_pmask_get, }, { .iface = SNDRV_CTL_ELEM_IFACE_PCM, - .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), .info = snd_ps3_spdif_mask_info, .get = snd_ps3_spdif_default_get, .put = snd_ps3_spdif_default_put, }, }; +static struct snd_pcm_ops snd_ps3_pcm_spdif_ops = { + .open = snd_ps3_pcm_open, + .close = snd_ps3_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_ps3_pcm_hw_params, + .hw_free = snd_ps3_pcm_hw_free, + .prepare = snd_ps3_pcm_prepare, + .trigger = snd_ps3_pcm_trigger, + .pointer = snd_ps3_pcm_pointer, +}; + -static int snd_ps3_map_mmio(void) +static int __devinit snd_ps3_map_mmio(void) { the_card.mapped_mmio_vaddr = ioremap(the_card.ps3_dev->m_region->bus_addr, @@ -841,7 +807,7 @@ static void snd_ps3_unmap_mmio(void) the_card.mapped_mmio_vaddr = NULL; } -static int snd_ps3_allocate_irq(void) +static int __devinit snd_ps3_allocate_irq(void) { int ret; u64 lpar_addr, lpar_size; @@ -899,7 +865,7 @@ static void snd_ps3_free_irq(void) ps3_irq_plug_destroy(the_card.irq_no); } -static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start) +static void __devinit snd_ps3_audio_set_base_addr(uint64_t ioaddr_start) { uint64_t val; int ret; @@ -915,7 +881,53 @@ static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start) ret); } -static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev) +static void __devinit snd_ps3_audio_fixup(struct snd_ps3_card_info *card) +{ + /* + * avsetting driver seems to never change the followings + * so, init them here once + */ + + /* no dma interrupt needed */ + write_reg(PS3_AUDIO_INTR_EN_0, 0); + + /* use every 4 buffer empty interrupt */ + update_mask_reg(PS3_AUDIO_AX_IC, + PS3_AUDIO_AX_IC_AASOIMD_MASK, + PS3_AUDIO_AX_IC_AASOIMD_EVERY4); + + /* enable 3wire clocks */ + update_mask_reg(PS3_AUDIO_AO_3WMCTRL, + ~(PS3_AUDIO_AO_3WMCTRL_ASOBCLKD_DISABLED | + PS3_AUDIO_AO_3WMCTRL_ASOLRCKD_DISABLED), + 0); + update_reg(PS3_AUDIO_AO_3WMCTRL, + PS3_AUDIO_AO_3WMCTRL_ASOPLRCK_DEFAULT); +} + +static int __devinit snd_ps3_init_avsetting(struct snd_ps3_card_info *card) +{ + int ret; + pr_debug("%s: start\n", __func__); + card->avs.avs_audio_ch = PS3AV_CMD_AUDIO_NUM_OF_CH_2; + card->avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K; + card->avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16; + card->avs.avs_audio_format = PS3AV_CMD_AUDIO_FORMAT_PCM; + card->avs.avs_audio_source = PS3AV_CMD_AUDIO_SOURCE_SERIAL; + memcpy(card->avs.avs_cs_info, ps3av_mode_cs_info, 8); + + ret = snd_ps3_change_avsetting(card); + + snd_ps3_audio_fixup(card); + + /* to start to generate SPDIF signal, fill data */ + snd_ps3_program_dma(card, SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL); + snd_ps3_kick_dma(card); + pr_debug("%s: end\n", __func__); + return ret; +} + +static int __devinit snd_ps3_driver_probe(struct ps3_system_bus_device *dev) { int i, ret; u64 lpar_addr, lpar_size; @@ -1020,11 +1032,12 @@ static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev) * its size should be lager than PS3_AUDIO_FIFO_STAGE_SIZE * 2 * PAGE_SIZE is enogh */ - if (!(the_card.null_buffer_start_vaddr = - dma_alloc_coherent(&the_card.ps3_dev->core, - PAGE_SIZE, - &the_card.null_buffer_start_dma_addr, - GFP_KERNEL))) { + the_card.null_buffer_start_vaddr = + dma_alloc_coherent(&the_card.ps3_dev->core, + PAGE_SIZE, + &the_card.null_buffer_start_dma_addr, + GFP_KERNEL); + if (!the_card.null_buffer_start_vaddr) { pr_info("%s: nullbuffer alloc failed\n", __func__); goto clean_preallocate; } @@ -1115,71 +1128,6 @@ static struct ps3_system_bus_driver snd_ps3_bus_driver_info = { /* - * Interrupt handler - */ -static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id) -{ - - uint32_t port_intr; - int underflow_occured = 0; - struct snd_ps3_card_info *card = dev_id; - - if (!card->running) { - update_reg(PS3_AUDIO_AX_IS, 0); - update_reg(PS3_AUDIO_INTR_0, 0); - return IRQ_HANDLED; - } - - port_intr = read_reg(PS3_AUDIO_AX_IS); - /* - *serial buffer empty detected (every 4 times), - *program next dma and kick it - */ - if (port_intr & PS3_AUDIO_AX_IE_ASOBEIE(0)) { - write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBEIE(0)); - if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) { - write_reg(PS3_AUDIO_AX_IS, port_intr); - underflow_occured = 1; - } - if (card->silent) { - /* we are still in silent time */ - snd_ps3_program_dma(card, - (underflow_occured) ? - SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL : - SND_PS3_DMA_FILLTYPE_SILENT_RUNNING); - snd_ps3_kick_dma(card); - card->silent --; - } else { - snd_ps3_program_dma(card, - (underflow_occured) ? - SND_PS3_DMA_FILLTYPE_FIRSTFILL : - SND_PS3_DMA_FILLTYPE_RUNNING); - snd_ps3_kick_dma(card); - snd_pcm_period_elapsed(card->substream); - } - } else if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) { - write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBUIE(0)); - /* - * serial out underflow, but buffer empty not detected. - * in this case, fill fifo with 0 to recover. After - * filling dummy data, serial automatically start to - * consume them and then will generate normal buffer - * empty interrupts. - * If both buffer underflow and buffer empty are occured, - * it is better to do nomal data transfer than empty one - */ - snd_ps3_program_dma(card, - SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL); - snd_ps3_kick_dma(card); - snd_ps3_program_dma(card, - SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL); - snd_ps3_kick_dma(card); - } - /* clear interrupt cause */ - return IRQ_HANDLED; -}; - -/* * module/subsystem initialize/terminate */ static int __init snd_ps3_init(void) @@ -1197,10 +1145,15 @@ static int __init snd_ps3_init(void) return ret; } +module_init(snd_ps3_init); static void __exit snd_ps3_exit(void) { ps3_system_bus_driver_unregister(&snd_ps3_bus_driver_info); } +module_exit(snd_ps3_exit); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("PS3 sound driver"); +MODULE_AUTHOR("Sony Computer Entertainment Inc."); MODULE_ALIAS(PS3_MODULE_ALIAS_SOUND); diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c index 40222fc..08e584d 100644 --- a/sound/ppc/tumbler.c +++ b/sound/ppc/tumbler.c @@ -838,7 +838,7 @@ static int snapper_put_capture_source(struct snd_kcontrol *kcontrol, /* */ -static struct snd_kcontrol_new tumbler_mixers[] __initdata = { +static struct snd_kcontrol_new tumbler_mixers[] __devinitdata = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Master Playback Volume", .info = tumbler_info_master_volume, @@ -862,7 +862,7 @@ static struct snd_kcontrol_new tumbler_mixers[] __initdata = { }, }; -static struct snd_kcontrol_new snapper_mixers[] __initdata = { +static struct snd_kcontrol_new snapper_mixers[] __devinitdata = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Master Playback Volume", .info = tumbler_info_master_volume, @@ -895,7 +895,7 @@ static struct snd_kcontrol_new snapper_mixers[] __initdata = { }, }; -static struct snd_kcontrol_new tumbler_hp_sw __initdata = { +static struct snd_kcontrol_new tumbler_hp_sw __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Headphone Playback Switch", .info = snd_pmac_boolean_mono_info, @@ -903,7 +903,7 @@ static struct snd_kcontrol_new tumbler_hp_sw __initdata = { .put = tumbler_put_mute_switch, .private_value = TUMBLER_MUTE_HP, }; -static struct snd_kcontrol_new tumbler_speaker_sw __initdata = { +static struct snd_kcontrol_new tumbler_speaker_sw __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "PC Speaker Playback Switch", .info = snd_pmac_boolean_mono_info, @@ -911,7 +911,7 @@ static struct snd_kcontrol_new tumbler_speaker_sw __initdata = { .put = tumbler_put_mute_switch, .private_value = TUMBLER_MUTE_AMP, }; -static struct snd_kcontrol_new tumbler_lineout_sw __initdata = { +static struct snd_kcontrol_new tumbler_lineout_sw __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Line Out Playback Switch", .info = snd_pmac_boolean_mono_info, @@ -919,7 +919,7 @@ static struct snd_kcontrol_new tumbler_lineout_sw __initdata = { .put = tumbler_put_mute_switch, .private_value = TUMBLER_MUTE_LINE, }; -static struct snd_kcontrol_new tumbler_drc_sw __initdata = { +static struct snd_kcontrol_new tumbler_drc_sw __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "DRC Switch", .info = snd_pmac_boolean_mono_info, @@ -1269,7 +1269,7 @@ static void tumbler_resume(struct snd_pmac *chip) #endif /* initialize tumbler */ -static int __init tumbler_init(struct snd_pmac *chip) +static int __devinit tumbler_init(struct snd_pmac *chip) { int irq; struct pmac_tumbler *mix = chip->mixer_data; @@ -1339,7 +1339,7 @@ static void tumbler_cleanup(struct snd_pmac *chip) } /* exported */ -int __init snd_pmac_tumbler_init(struct snd_pmac *chip) +int __devinit snd_pmac_tumbler_init(struct snd_pmac *chip) { int i, err; struct pmac_tumbler *mix; diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 3d2bb6f..d3e786a 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -32,7 +32,9 @@ source "sound/soc/fsl/Kconfig" source "sound/soc/omap/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" +source "sound/soc/s6000/Kconfig" source "sound/soc/sh/Kconfig" +source "sound/soc/txx9/Kconfig" # Supported codecs source "sound/soc/codecs/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 0237879..6f1e28d 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -10,4 +10,6 @@ obj-$(CONFIG_SND_SOC) += fsl/ obj-$(CONFIG_SND_SOC) += omap/ obj-$(CONFIG_SND_SOC) += pxa/ obj-$(CONFIG_SND_SOC) += s3c24xx/ +obj-$(CONFIG_SND_SOC) += s6000/ obj-$(CONFIG_SND_SOC) += sh/ +obj-$(CONFIG_SND_SOC) += txx9/ diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index a608d70..e720d5e 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -41,3 +41,11 @@ config SND_AT32_SOC_PLAYPAQ_SLAVE and FRAME signals on the PlayPaq. Unless you want to play with the AT32 as the SSC master, you probably want to say N here, as this will give you better sound quality. + +config SND_AT91_SOC_AFEB9260 + tristate "SoC Audio support for AFEB9260 board" + depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_SOC_TLV320AIC23 + help + Say Y here to support sound on AFEB9260 board. diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile index f54a7cc..e7ea56b 100644 --- a/sound/soc/atmel/Makefile +++ b/sound/soc/atmel/Makefile @@ -13,3 +13,4 @@ snd-soc-playpaq-objs := playpaq_wm8510.o obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o +obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index 7065753..9eb610c 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -117,7 +117,7 @@ static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( * Find actual rate, compare to requested rate */ actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); - pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", + pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n", rate, actual_rate); diff --git a/sound/soc/atmel/snd-soc-afeb9260.c b/sound/soc/atmel/snd-soc-afeb9260.c new file mode 100644 index 0000000..23349de --- /dev/null +++ b/sound/soc/atmel/snd-soc-afeb9260.c @@ -0,0 +1,203 @@ +/* + * afeb9260.c -- SoC audio for AFEB9260 + * + * Copyright (C) 2009 Sergey Lapin + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "../codecs/tlv320aic23.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + +#define CODEC_CLOCK 12000000 + +static int afeb9260_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int err; + + /* Set codec DAI configuration */ + err = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_I2S| + SND_SOC_DAIFMT_NB_IF | + SND_SOC_DAIFMT_CBM_CFM); + if (err < 0) { + printk(KERN_ERR "can't set codec DAI configuration\n"); + return err; + } + + /* Set cpu DAI configuration */ + err = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_IF | + SND_SOC_DAIFMT_CBM_CFM); + if (err < 0) { + printk(KERN_ERR "can't set cpu DAI configuration\n"); + return err; + } + + /* Set the codec system clock for DAC and ADC */ + err = + snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, SND_SOC_CLOCK_IN); + + if (err < 0) { + printk(KERN_ERR "can't set codec system clock\n"); + return err; + } + + return err; +} + +static struct snd_soc_ops afeb9260_ops = { + .hw_params = afeb9260_hw_params, +}; + +static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "LHPOUT"}, + {"Headphone Jack", NULL, "RHPOUT"}, + + {"LLINEIN", NULL, "Line In"}, + {"RLINEIN", NULL, "Line In"}, + + {"MICIN", NULL, "Mic Jack"}, +}; + +static int afeb9260_tlv320aic23_init(struct snd_soc_codec *codec) +{ + + /* Add afeb9260 specific widgets */ + snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets, + ARRAY_SIZE(tlv320aic23_dapm_widgets)); + + /* Set up afeb9260 specific audio path audio_map */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Line In"); + snd_soc_dapm_enable_pin(codec, "Mic Jack"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link afeb9260_dai = { + .name = "TLV320AIC23", + .stream_name = "AIC23", + .cpu_dai = &atmel_ssc_dai[0], + .codec_dai = &tlv320aic23_dai, + .init = afeb9260_tlv320aic23_init, + .ops = &afeb9260_ops, +}; + +/* Audio machine driver */ +static struct snd_soc_card snd_soc_machine_afeb9260 = { + .name = "AFEB9260", + .platform = &atmel_soc_platform, + .dai_link = &afeb9260_dai, + .num_links = 1, +}; + +/* Audio subsystem */ +static struct snd_soc_device afeb9260_snd_devdata = { + .card = &snd_soc_machine_afeb9260, + .codec_dev = &soc_codec_dev_tlv320aic23, +}; + +static struct platform_device *afeb9260_snd_device; + +static int __init afeb9260_soc_init(void) +{ + int err; + struct device *dev; + struct atmel_ssc_info *ssc_p = afeb9260_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + + if (!(machine_is_afeb9260())) + return -ENODEV; + + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + printk(KERN_ERR "ASoC: Failed to request SSC 0\n"); + err = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + afeb9260_snd_device = platform_device_alloc("soc-audio", -1); + if (!afeb9260_snd_device) { + printk(KERN_ERR "ASoC: Platform device allocation failed\n"); + return -ENOMEM; + } + + platform_set_drvdata(afeb9260_snd_device, &afeb9260_snd_devdata); + afeb9260_snd_devdata.dev = &afeb9260_snd_device->dev; + err = platform_device_add(afeb9260_snd_device); + if (err) + goto err1; + + dev = &afeb9260_snd_device->dev; + + return 0; +err1: + platform_device_del(afeb9260_snd_device); + platform_device_put(afeb9260_snd_device); +err_ssc: + return err; + +} + +static void __exit afeb9260_soc_exit(void) +{ + platform_device_unregister(afeb9260_snd_device); +} + +module_init(afeb9260_soc_init); +module_exit(afeb9260_soc_exit); + +MODULE_AUTHOR("Sergey Lapin "); +MODULE_DESCRIPTION("ALSA SoC for AFEB9260"); +MODULE_LICENSE("GPL"); + diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c index 8a935f2..b1ed423 100644 --- a/sound/soc/blackfin/bf5xx-ac97.c +++ b/sound/soc/blackfin/bf5xx-ac97.c @@ -31,6 +31,15 @@ #include "bf5xx-sport.h" #include "bf5xx-ac97.h" +/* Anomaly notes: + * 05000250 - AD1980 is running in TDM mode and RFS/TFS are generated by SPORT + * contrtoller. But, RFSDIV and TFSDIV are always set to 16*16-1, + * while the max AC97 data size is 13*16. The DIV is always larger + * than data size. AD73311 and ad2602 are not running in TDM mode. + * AD1836 and AD73322 depend on external RFS/TFS only. So, this + * anomaly does not affect blackfin sound drivers. +*/ + static int *cmd_count; static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM; diff --git a/sound/soc/blackfin/bf5xx-sport.c b/sound/soc/blackfin/bf5xx-sport.c index b7953c8..469ce7f 100644 --- a/sound/soc/blackfin/bf5xx-sport.c +++ b/sound/soc/blackfin/bf5xx-sport.c @@ -190,7 +190,7 @@ static inline int sport_hook_rx_dummy(struct sport_device *sport) desc = get_dma_next_desc_ptr(sport->dma_rx_chan); /* Copy the descriptor which will be damaged to backup */ temp_desc = *desc; - desc->x_count = 0xa; + desc->x_count = sport->dummy_count / 2; desc->y_count = 0; desc->next_desc_addr = sport->dummy_rx_desc; local_irq_restore(flags); @@ -309,7 +309,7 @@ static inline int sport_hook_tx_dummy(struct sport_device *sport) desc = get_dma_next_desc_ptr(sport->dma_tx_chan); /* Store the descriptor which will be damaged */ temp_desc = *desc; - desc->x_count = 0xa; + desc->x_count = sport->dummy_count / 2; desc->y_count = 0; desc->next_desc_addr = sport->dummy_tx_desc; local_irq_restore(flags); diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index b6c7f7a..bbc97fd 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -18,7 +18,9 @@ config SND_SOC_ALL_CODECS select SND_SOC_AK4535 if I2C select SND_SOC_CS4270 if I2C select SND_SOC_PCM3008 + select SND_SOC_SPDIF select SND_SOC_SSM2602 if I2C + select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_TLV320AIC23 if I2C select SND_SOC_TLV320AIC26 if SPI_MASTER select SND_SOC_TLV320AIC3X if I2C @@ -35,8 +37,12 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8900 if I2C select SND_SOC_WM8903 if I2C + select SND_SOC_WM8940 if I2C + select SND_SOC_WM8960 if I2C select SND_SOC_WM8971 if I2C + select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8990 if I2C + select SND_SOC_WM9081 if I2C select SND_SOC_WM9705 if SND_SOC_AC97_BUS select SND_SOC_WM9712 if SND_SOC_AC97_BUS select SND_SOC_WM9713 if SND_SOC_AC97_BUS @@ -86,9 +92,15 @@ config SND_SOC_L3 config SND_SOC_PCM3008 tristate +config SND_SOC_SPDIF + tristate + config SND_SOC_SSM2602 tristate +config SND_SOC_STAC9766 + tristate + config SND_SOC_TLV320AIC23 tristate @@ -138,12 +150,24 @@ config SND_SOC_WM8900 config SND_SOC_WM8903 tristate +config SND_SOC_WM8940 + tristate + +config SND_SOC_WM8960 + tristate + config SND_SOC_WM8971 tristate +config SND_SOC_WM8988 + tristate + config SND_SOC_WM8990 tristate +config SND_SOC_WM9081 + tristate + config SND_SOC_WM9705 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f265380..8b75305 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -6,7 +6,9 @@ snd-soc-ak4535-objs := ak4535.o snd-soc-cs4270-objs := cs4270.o snd-soc-l3-objs := l3.o snd-soc-pcm3008-objs := pcm3008.o +snd-soc-spdif-objs := spdif_transciever.o snd-soc-ssm2602-objs := ssm2602.o +snd-soc-stac9766-objs := stac9766.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic26-objs := tlv320aic26.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o @@ -23,8 +25,12 @@ snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o snd-soc-wm8900-objs := wm8900.o snd-soc-wm8903-objs := wm8903.o +snd-soc-wm8940-objs := wm8940.o +snd-soc-wm8960-objs := wm8960.o snd-soc-wm8971-objs := wm8971.o +snd-soc-wm8988-objs := wm8988.o snd-soc-wm8990-objs := wm8990.o +snd-soc-wm9081-objs := wm9081.o snd-soc-wm9705-objs := wm9705.o snd-soc-wm9712-objs := wm9712.o snd-soc-wm9713-objs := wm9713.o @@ -37,7 +43,9 @@ obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o +obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o +obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o @@ -55,7 +63,11 @@ obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o +obj-$(CONFIG_SND_SOC_WM8940) += snd-soc-wm8940.o +obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o +obj-$(CONFIG_SND_SOC_WM8988) += snd-soc-wm8988.o obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o +obj-$(CONFIG_SND_SOC_WM9081) += snd-soc-wm9081.o obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index b0d4af1..932299b 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -53,13 +53,13 @@ struct snd_soc_dai ac97_dai = { .channels_min = 1, .channels_max = 2, .rates = STD_AC97_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .formats = SND_SOC_STD_AC97_FMTS,}, .capture = { .stream_name = "AC97 Capture", .channels_min = 1, .channels_max = 2, .rates = STD_AC97_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .formats = SND_SOC_STD_AC97_FMTS,}, .ops = &ac97_dai_ops, }; EXPORT_SYMBOL_GPL(ac97_dai); diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c index ddb3b08..d7440a9 100644 --- a/sound/soc/codecs/ad1980.c +++ b/sound/soc/codecs/ad1980.c @@ -137,13 +137,13 @@ struct snd_soc_dai ad1980_dai = { .channels_min = 2, .channels_max = 6, .rates = SNDRV_PCM_RATE_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE, }, + .formats = SND_SOC_STD_AC97_FMTS, }, .capture = { .stream_name = "Capture", .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE, }, + .formats = SND_SOC_STD_AC97_FMTS, }, }; EXPORT_SYMBOL_GPL(ad1980_dai); diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 7fa09a3..a32b822 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -18,7 +18,7 @@ * - The machine driver's 'startup' function must call * cs4270_set_dai_sysclk() with the value of MCLK. * - Only I2S and left-justified modes are supported - * - Power management is not supported + * - Power management is supported */ #include @@ -27,6 +27,7 @@ #include #include #include +#include #include "cs4270.h" @@ -56,6 +57,7 @@ #define CS4270_FIRSTREG 0x01 #define CS4270_LASTREG 0x08 #define CS4270_NUMREGS (CS4270_LASTREG - CS4270_FIRSTREG + 1) +#define CS4270_I2C_INCR 0x80 /* Bit masks for the CS4270 registers */ #define CS4270_CHIPID_ID 0xF0 @@ -64,6 +66,8 @@ #define CS4270_PWRCTL_PDN_ADC 0x20 #define CS4270_PWRCTL_PDN_DAC 0x02 #define CS4270_PWRCTL_PDN 0x01 +#define CS4270_PWRCTL_PDN_ALL \ + (CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN) #define CS4270_MODE_SPEED_MASK 0x30 #define CS4270_MODE_1X 0x00 #define CS4270_MODE_2X 0x10 @@ -109,6 +113,7 @@ struct cs4270_private { unsigned int mclk; /* Input frequency of the MCLK pin */ unsigned int mode; /* The mode (I2S or left-justified) */ unsigned int slave_mode; + unsigned int manual_mute; }; /** @@ -295,7 +300,7 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec) s32 length; length = i2c_smbus_read_i2c_block_data(i2c_client, - CS4270_FIRSTREG | 0x80, CS4270_NUMREGS, cache); + CS4270_FIRSTREG | CS4270_I2C_INCR, CS4270_NUMREGS, cache); if (length != CS4270_NUMREGS) { dev_err(codec->dev, "i2c read failure, addr=0x%x\n", @@ -453,7 +458,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, } /** - * cs4270_mute - enable/disable the CS4270 external mute + * cs4270_dai_mute - enable/disable the CS4270 external mute * @dai: the SOC DAI * @mute: 0 = disable mute, 1 = enable mute * @@ -462,21 +467,52 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, * board does not have the MUTEA or MUTEB pins connected to such circuitry, * then this function will do nothing. */ -static int cs4270_mute(struct snd_soc_dai *dai, int mute) +static int cs4270_dai_mute(struct snd_soc_dai *dai, int mute) { struct snd_soc_codec *codec = dai->codec; + struct cs4270_private *cs4270 = codec->private_data; int reg6; reg6 = snd_soc_read(codec, CS4270_MUTE); if (mute) reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B; - else + else { reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B); + reg6 |= cs4270->manual_mute; + } return snd_soc_write(codec, CS4270_MUTE, reg6); } +/** + * cs4270_soc_put_mute - put callback for the 'Master Playback switch' + * alsa control. + * @kcontrol: mixer control + * @ucontrol: control element information + * + * This function basically passes the arguments on to the generic + * snd_soc_put_volsw() function and saves the mute information in + * our private data structure. This is because we want to prevent + * cs4270_dai_mute() neglecting the user's decision to manually + * mute the codec's output. + * + * Returns 0 for success. + */ +static int cs4270_soc_put_mute(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct cs4270_private *cs4270 = codec->private_data; + int left = !ucontrol->value.integer.value[0]; + int right = !ucontrol->value.integer.value[1]; + + cs4270->manual_mute = (left ? CS4270_MUTE_DAC_A : 0) | + (right ? CS4270_MUTE_DAC_B : 0); + + return snd_soc_put_volsw(kcontrol, ucontrol); +} + /* A list of non-DAPM controls that the CS4270 supports */ static const struct snd_kcontrol_new cs4270_snd_controls[] = { SOC_DOUBLE_R("Master Playback Volume", @@ -486,7 +522,9 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = { SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0), SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1), SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0), - SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 0) + SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1), + SOC_DOUBLE_EXT("Master Playback Switch", CS4270_MUTE, 0, 1, 1, 1, + snd_soc_get_volsw, cs4270_soc_put_mute), }; /* @@ -506,7 +544,7 @@ static struct snd_soc_dai_ops cs4270_dai_ops = { .hw_params = cs4270_hw_params, .set_sysclk = cs4270_set_dai_sysclk, .set_fmt = cs4270_set_dai_fmt, - .digital_mute = cs4270_mute, + .digital_mute = cs4270_dai_mute, }; struct snd_soc_dai cs4270_dai = { @@ -753,6 +791,57 @@ static struct i2c_device_id cs4270_id[] = { }; MODULE_DEVICE_TABLE(i2c, cs4270_id); +#ifdef CONFIG_PM + +/* This suspend/resume implementation can handle both - a simple standby + * where the codec remains powered, and a full suspend, where the voltage + * domain the codec is connected to is teared down and/or any other hardware + * reset condition is asserted. + * + * The codec's own power saving features are enabled in the suspend callback, + * and all registers are written back to the hardware when resuming. + */ + +static int cs4270_i2c_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct cs4270_private *cs4270 = i2c_get_clientdata(client); + struct snd_soc_codec *codec = &cs4270->codec; + int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL; + + return snd_soc_write(codec, CS4270_PWRCTL, reg); +} + +static int cs4270_i2c_resume(struct i2c_client *client) +{ + struct cs4270_private *cs4270 = i2c_get_clientdata(client); + struct snd_soc_codec *codec = &cs4270->codec; + int reg; + + /* In case the device was put to hard reset during sleep, we need to + * wait 500ns here before any I2C communication. */ + ndelay(500); + + /* first restore the entire register cache ... */ + for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) { + u8 val = snd_soc_read(codec, reg); + + if (i2c_smbus_write_byte_data(client, reg, val)) { + dev_err(codec->dev, "i2c write failed\n"); + return -EIO; + } + } + + /* ... then disable the power-down bits */ + reg = snd_soc_read(codec, CS4270_PWRCTL); + reg &= ~CS4270_PWRCTL_PDN_ALL; + + return snd_soc_write(codec, CS4270_PWRCTL, reg); +} +#else +#define cs4270_i2c_suspend NULL +#define cs4270_i2c_resume NULL +#endif /* CONFIG_PM */ + /* * cs4270_i2c_driver - I2C device identification * @@ -767,6 +856,8 @@ static struct i2c_driver cs4270_i2c_driver = { .id_table = cs4270_id, .probe = cs4270_i2c_probe, .remove = cs4270_i2c_remove, + .suspend = cs4270_i2c_suspend, + .resume = cs4270_i2c_resume, }; /* diff --git a/sound/soc/codecs/spdif_transciever.c b/sound/soc/codecs/spdif_transciever.c new file mode 100644 index 0000000..218b33a --- /dev/null +++ b/sound/soc/codecs/spdif_transciever.c @@ -0,0 +1,71 @@ +/* + * ALSA SoC SPDIF DIT driver + * + * This driver is used by controllers which can operate in DIT (SPDI/F) where + * no codec is needed. This file provides stub codec that can be used + * in these configurations. TI DaVinci Audio controller uses this driver. + * + * Author: Steve Chen, + * Copyright: (C) 2009 MontaVista Software, Inc., + * Copyright: (C) 2009 Texas Instruments, India + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include "spdif_transciever.h" + +#define STUB_RATES SNDRV_PCM_RATE_8000_96000 +#define STUB_FORMATS SNDRV_PCM_FMTBIT_S16_LE + +struct snd_soc_dai dit_stub_dai = { + .name = "DIT", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 384, + .rates = STUB_RATES, + .formats = STUB_FORMATS, + }, +}; + +static int spdif_dit_probe(struct platform_device *pdev) +{ + dit_stub_dai.dev = &pdev->dev; + return snd_soc_register_dai(&dit_stub_dai); +} + +static int spdif_dit_remove(struct platform_device *pdev) +{ + snd_soc_unregister_dai(&dit_stub_dai); + return 0; +} + +static struct platform_driver spdif_dit_driver = { + .probe = spdif_dit_probe, + .remove = spdif_dit_remove, + .driver = { + .name = "spdif-dit", + .owner = THIS_MODULE, + }, +}; + +static int __init dit_modinit(void) +{ + return platform_driver_register(&spdif_dit_driver); +} + +static void __exit dit_exit(void) +{ + platform_driver_unregister(&spdif_dit_driver); +} + +module_init(dit_modinit); +module_exit(dit_exit); + diff --git a/sound/soc/codecs/spdif_transciever.h b/sound/soc/codecs/spdif_transciever.h new file mode 100644 index 0000000..296f2eb --- /dev/null +++ b/sound/soc/codecs/spdif_transciever.h @@ -0,0 +1,17 @@ +/* + * ALSA SoC DIT/DIR driver header + * + * Author: Steve Chen, + * Copyright: (C) 2008 MontaVista Software, Inc., + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef CODEC_STUBS_H +#define CODEC_STUBS_H + +extern struct snd_soc_dai dit_stub_dai; + +#endif /* CODEC_STUBS_H */ diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index 87f606c..1fc4c8e 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -336,15 +336,17 @@ static int ssm2602_startup(struct snd_pcm_substream *substream, master_runtime->sample_bits, master_runtime->rate); - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_RATE, - master_runtime->rate, - master_runtime->rate); - - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_SAMPLE_BITS, - master_runtime->sample_bits, - master_runtime->sample_bits); + if (master_runtime->rate != 0) + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + master_runtime->rate, + master_runtime->rate); + + if (master_runtime->sample_bits != 0) + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + master_runtime->sample_bits, + master_runtime->sample_bits); ssm2602->slave_substream = substream; } else @@ -372,6 +374,11 @@ static void ssm2602_shutdown(struct snd_pcm_substream *substream, struct snd_soc_device *socdev = rtd->socdev; struct snd_soc_codec *codec = socdev->card->codec; struct ssm2602_priv *ssm2602 = codec->private_data; + + if (ssm2602->master_substream == substream) + ssm2602->master_substream = ssm2602->slave_substream; + + ssm2602->slave_substream = NULL; /* deactivate */ if (!codec->active) ssm2602_write(codec, SSM2602_ACTIVE, 0); @@ -497,11 +504,9 @@ static int ssm2602_set_bias_level(struct snd_soc_codec *codec, return 0; } -#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ - SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ - SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ - SNDRV_PCM_RATE_96000) +#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_32000 |\ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\ + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) #define SSM2602_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c new file mode 100644 index 0000000..8ad4b7b --- /dev/null +++ b/sound/soc/codecs/stac9766.c @@ -0,0 +1,463 @@ +/* + * stac9766.c -- ALSA SoC STAC9766 codec support + * + * Copyright 2009 Jon Smirl, Digispeaker + * Author: Jon Smirl + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Features:- + * + * o Support for AC97 Codec, S/PDIF + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "stac9766.h" + +#define STAC9766_VERSION "0.10" + +/* + * STAC9766 register cache + */ +static const u16 stac9766_reg[] = { + 0x6A90, 0x8000, 0x8000, 0x8000, /* 6 */ + 0x0000, 0x0000, 0x8008, 0x8008, /* e */ + 0x8808, 0x8808, 0x8808, 0x8808, /* 16 */ + 0x8808, 0x0000, 0x8000, 0x0000, /* 1e */ + 0x0000, 0x0000, 0x0000, 0x000f, /* 26 */ + 0x0a05, 0x0400, 0xbb80, 0x0000, /* 2e */ + 0x0000, 0xbb80, 0x0000, 0x0000, /* 36 */ + 0x0000, 0x2000, 0x0000, 0x0100, /* 3e */ + 0x0000, 0x0000, 0x0080, 0x0000, /* 46 */ + 0x0000, 0x0000, 0x0003, 0xffff, /* 4e */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 56 */ + 0x4000, 0x0000, 0x0000, 0x0000, /* 5e */ + 0x1201, 0xFFFF, 0xFFFF, 0x0000, /* 66 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 6e */ + 0x0000, 0x0000, 0x0000, 0x0006, /* 76 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 7e */ +}; + +static const char *stac9766_record_mux[] = {"Mic", "CD", "Video", "AUX", + "Line", "Stereo Mix", "Mono Mix", "Phone"}; +static const char *stac9766_mono_mux[] = {"Mix", "Mic"}; +static const char *stac9766_mic_mux[] = {"Mic1", "Mic2"}; +static const char *stac9766_SPDIF_mux[] = {"PCM", "ADC Record"}; +static const char *stac9766_popbypass_mux[] = {"Normal", "Bypass Mixer"}; +static const char *stac9766_record_all_mux[] = {"All analog", + "Analog plus DAC"}; +static const char *stac9766_boost1[] = {"0dB", "10dB"}; +static const char *stac9766_boost2[] = {"0dB", "20dB"}; +static const char *stac9766_stereo_mic[] = {"Off", "On"}; + +static const struct soc_enum stac9766_record_enum = + SOC_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 8, stac9766_record_mux); +static const struct soc_enum stac9766_mono_enum = + SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 9, 2, stac9766_mono_mux); +static const struct soc_enum stac9766_mic_enum = + SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 8, 2, stac9766_mic_mux); +static const struct soc_enum stac9766_SPDIF_enum = + SOC_ENUM_SINGLE(AC97_STAC_DA_CONTROL, 1, 2, stac9766_SPDIF_mux); +static const struct soc_enum stac9766_popbypass_enum = + SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 15, 2, stac9766_popbypass_mux); +static const struct soc_enum stac9766_record_all_enum = + SOC_ENUM_SINGLE(AC97_STAC_ANALOG_SPECIAL, 12, 2, + stac9766_record_all_mux); +static const struct soc_enum stac9766_boost1_enum = + SOC_ENUM_SINGLE(AC97_MIC, 6, 2, stac9766_boost1); /* 0/10dB */ +static const struct soc_enum stac9766_boost2_enum = + SOC_ENUM_SINGLE(AC97_STAC_ANALOG_SPECIAL, 2, 2, stac9766_boost2); /* 0/20dB */ +static const struct soc_enum stac9766_stereo_mic_enum = + SOC_ENUM_SINGLE(AC97_STAC_STEREO_MIC, 2, 1, stac9766_stereo_mic); + +static const DECLARE_TLV_DB_LINEAR(master_tlv, -4600, 0); +static const DECLARE_TLV_DB_LINEAR(record_tlv, 0, 2250); +static const DECLARE_TLV_DB_LINEAR(beep_tlv, -4500, 0); +static const DECLARE_TLV_DB_LINEAR(mix_tlv, -3450, 1200); + +static const struct snd_kcontrol_new stac9766_snd_ac97_controls[] = { + SOC_DOUBLE_TLV("Speaker Volume", AC97_MASTER, 8, 0, 31, 1, master_tlv), + SOC_SINGLE("Speaker Switch", AC97_MASTER, 15, 1, 1), + SOC_DOUBLE_TLV("Headphone Volume", AC97_HEADPHONE, 8, 0, 31, 1, + master_tlv), + SOC_SINGLE("Headphone Switch", AC97_HEADPHONE, 15, 1, 1), + SOC_SINGLE_TLV("Mono Out Volume", AC97_MASTER_MONO, 0, 31, 1, + master_tlv), + SOC_SINGLE("Mono Out Switch", AC97_MASTER_MONO, 15, 1, 1), + + SOC_DOUBLE_TLV("Record Volume", AC97_REC_GAIN, 8, 0, 15, 0, record_tlv), + SOC_SINGLE("Record Switch", AC97_REC_GAIN, 15, 1, 1), + + + SOC_SINGLE_TLV("Beep Volume", AC97_PC_BEEP, 1, 15, 1, beep_tlv), + SOC_SINGLE("Beep Switch", AC97_PC_BEEP, 15, 1, 1), + SOC_SINGLE("Beep Frequency", AC97_PC_BEEP, 5, 127, 1), + SOC_SINGLE_TLV("Phone Volume", AC97_PHONE, 0, 31, 1, mix_tlv), + SOC_SINGLE("Phone Switch", AC97_PHONE, 15, 1, 1), + + SOC_ENUM("Mic Boost1", stac9766_boost1_enum), + SOC_ENUM("Mic Boost2", stac9766_boost2_enum), + SOC_SINGLE_TLV("Mic Volume", AC97_MIC, 0, 31, 1, mix_tlv), + SOC_SINGLE("Mic Switch", AC97_MIC, 15, 1, 1), + SOC_ENUM("Stereo Mic", stac9766_stereo_mic_enum), + + SOC_DOUBLE_TLV("Line Volume", AC97_LINE, 8, 0, 31, 1, mix_tlv), + SOC_SINGLE("Line Switch", AC97_LINE, 15, 1, 1), + SOC_DOUBLE_TLV("CD Volume", AC97_CD, 8, 0, 31, 1, mix_tlv), + SOC_SINGLE("CD Switch", AC97_CD, 15, 1, 1), + SOC_DOUBLE_TLV("AUX Volume", AC97_AUX, 8, 0, 31, 1, mix_tlv), + SOC_SINGLE("AUX Switch", AC97_AUX, 15, 1, 1), + SOC_DOUBLE_TLV("Video Volume", AC97_VIDEO, 8, 0, 31, 1, mix_tlv), + SOC_SINGLE("Video Switch", AC97_VIDEO, 15, 1, 1), + + SOC_DOUBLE_TLV("DAC Volume", AC97_PCM, 8, 0, 31, 1, mix_tlv), + SOC_SINGLE("DAC Switch", AC97_PCM, 15, 1, 1), + SOC_SINGLE("Loopback Test Switch", AC97_GENERAL_PURPOSE, 7, 1, 0), + SOC_SINGLE("3D Volume", AC97_3D_CONTROL, 3, 2, 1), + SOC_SINGLE("3D Switch", AC97_GENERAL_PURPOSE, 13, 1, 0), + + SOC_ENUM("SPDIF Mux", stac9766_SPDIF_enum), + SOC_ENUM("Mic1/2 Mux", stac9766_mic_enum), + SOC_ENUM("Record All Mux", stac9766_record_all_enum), + SOC_ENUM("Record Mux", stac9766_record_enum), + SOC_ENUM("Mono Mux", stac9766_mono_enum), + SOC_ENUM("Pop Bypass Mux", stac9766_popbypass_enum), +}; + +static int stac9766_ac97_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int val) +{ + u16 *cache = codec->reg_cache; + + if (reg > AC97_STAC_PAGE0) { + stac9766_ac97_write(codec, AC97_INT_PAGING, 0); + soc_ac97_ops.write(codec->ac97, reg, val); + stac9766_ac97_write(codec, AC97_INT_PAGING, 1); + return 0; + } + if (reg / 2 > ARRAY_SIZE(stac9766_reg)) + return -EIO; + + soc_ac97_ops.write(codec->ac97, reg, val); + cache[reg / 2] = val; + return 0; +} + +static unsigned int stac9766_ac97_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 val = 0, *cache = codec->reg_cache; + + if (reg > AC97_STAC_PAGE0) { + stac9766_ac97_write(codec, AC97_INT_PAGING, 0); + val = soc_ac97_ops.read(codec->ac97, reg - AC97_STAC_PAGE0); + stac9766_ac97_write(codec, AC97_INT_PAGING, 1); + return val; + } + if (reg / 2 > ARRAY_SIZE(stac9766_reg)) + return -EIO; + + if (reg == AC97_RESET || reg == AC97_GPIO_STATUS || + reg == AC97_INT_PAGING || reg == AC97_VENDOR_ID1 || + reg == AC97_VENDOR_ID2) { + + val = soc_ac97_ops.read(codec->ac97, reg); + return val; + } + return cache[reg / 2]; +} + +static int ac97_analog_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned short reg, vra; + + vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS); + + vra |= 0x1; /* enable variable rate audio */ + + stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + reg = AC97_PCM_FRONT_DAC_RATE; + else + reg = AC97_PCM_LR_ADC_RATE; + + return stac9766_ac97_write(codec, reg, runtime->rate); +} + +static int ac97_digital_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned short reg, vra; + + stac9766_ac97_write(codec, AC97_SPDIF, 0x2002); + + vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS); + vra |= 0x5; /* Enable VRA and SPDIF out */ + + stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra); + + reg = AC97_PCM_FRONT_DAC_RATE; + + return stac9766_ac97_write(codec, reg, runtime->rate); +} + +static int ac97_digital_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned short vra; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_STOP: + vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS); + vra &= !0x04; + stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra); + break; + } + return 0; +} + +static int stac9766_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + switch (level) { + case SND_SOC_BIAS_ON: /* full On */ + case SND_SOC_BIAS_PREPARE: /* partial On */ + case SND_SOC_BIAS_STANDBY: /* Off, with power */ + stac9766_ac97_write(codec, AC97_POWERDOWN, 0x0000); + break; + case SND_SOC_BIAS_OFF: /* Off, without power */ + /* disable everything including AC link */ + stac9766_ac97_write(codec, AC97_POWERDOWN, 0xffff); + break; + } + codec->bias_level = level; + return 0; +} + +static int stac9766_reset(struct snd_soc_codec *codec, int try_warm) +{ + if (try_warm && soc_ac97_ops.warm_reset) { + soc_ac97_ops.warm_reset(codec->ac97); + if (stac9766_ac97_read(codec, 0) == stac9766_reg[0]) + return 1; + } + + soc_ac97_ops.reset(codec->ac97); + if (soc_ac97_ops.warm_reset) + soc_ac97_ops.warm_reset(codec->ac97); + if (stac9766_ac97_read(codec, 0) != stac9766_reg[0]) + return -EIO; + return 0; +} + +static int stac9766_codec_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + stac9766_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int stac9766_codec_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + u16 id, reset; + + reset = 0; + /* give the codec an AC97 warm reset to start the link */ +reset: + if (reset > 5) { + printk(KERN_ERR "stac9766 failed to resume"); + return -EIO; + } + codec->ac97->bus->ops->warm_reset(codec->ac97); + id = soc_ac97_ops.read(codec->ac97, AC97_VENDOR_ID2); + if (id != 0x4c13) { + stac9766_reset(codec, 0); + reset++; + goto reset; + } + stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + if (codec->suspend_bias_level == SND_SOC_BIAS_ON) + stac9766_set_bias_level(codec, SND_SOC_BIAS_ON); + + return 0; +} + +static struct snd_soc_dai_ops stac9766_dai_ops_analog = { + .prepare = ac97_analog_prepare, +}; + +static struct snd_soc_dai_ops stac9766_dai_ops_digital = { + .prepare = ac97_digital_prepare, + .trigger = ac97_digital_trigger, +}; + +struct snd_soc_dai stac9766_dai[] = { +{ + .name = "stac9766 analog", + .id = 0, + .ac97_control = 1, + + /* stream cababilities */ + .playback = { + .stream_name = "stac9766 analog", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SND_SOC_STD_AC97_FMTS, + }, + .capture = { + .stream_name = "stac9766 analog", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SND_SOC_STD_AC97_FMTS, + }, + /* alsa ops */ + .ops = &stac9766_dai_ops_analog, +}, +{ + .name = "stac9766 IEC958", + .id = 1, + .ac97_control = 1, + + /* stream cababilities */ + .playback = { + .stream_name = "stac9766 IEC958", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE, + }, + /* alsa ops */ + .ops = &stac9766_dai_ops_digital, +} +}; +EXPORT_SYMBOL_GPL(stac9766_dai); + +static int stac9766_codec_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + printk(KERN_INFO "STAC9766 SoC Audio Codec %s\n", STAC9766_VERSION); + + socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (socdev->card->codec == NULL) + return -ENOMEM; + codec = socdev->card->codec; + mutex_init(&codec->mutex); + + codec->reg_cache = kmemdup(stac9766_reg, sizeof(stac9766_reg), + GFP_KERNEL); + if (codec->reg_cache == NULL) { + ret = -ENOMEM; + goto cache_err; + } + codec->reg_cache_size = sizeof(stac9766_reg); + codec->reg_cache_step = 2; + + codec->name = "STAC9766"; + codec->owner = THIS_MODULE; + codec->dai = stac9766_dai; + codec->num_dai = ARRAY_SIZE(stac9766_dai); + codec->write = stac9766_ac97_write; + codec->read = stac9766_ac97_read; + codec->set_bias_level = stac9766_set_bias_level; + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); + if (ret < 0) + goto codec_err; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) + goto pcm_err; + + /* do a cold reset for the controller and then try + * a warm reset followed by an optional cold reset for codec */ + stac9766_reset(codec, 0); + ret = stac9766_reset(codec, 1); + if (ret < 0) { + printk(KERN_ERR "Failed to reset STAC9766: AC97 link error\n"); + goto reset_err; + } + + stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + snd_soc_add_controls(codec, stac9766_snd_ac97_controls, + ARRAY_SIZE(stac9766_snd_ac97_controls)); + + ret = snd_soc_init_card(socdev); + if (ret < 0) + goto reset_err; + return 0; + +reset_err: + snd_soc_free_pcms(socdev); +pcm_err: + snd_soc_free_ac97_codec(codec); +codec_err: + kfree(codec->private_data); +cache_err: + kfree(socdev->card->codec); + socdev->card->codec = NULL; + return ret; +} + +static int stac9766_codec_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + if (codec == NULL) + return 0; + + snd_soc_free_pcms(socdev); + snd_soc_free_ac97_codec(codec); + kfree(codec->reg_cache); + kfree(codec); + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_stac9766 = { + .probe = stac9766_codec_probe, + .remove = stac9766_codec_remove, + .suspend = stac9766_codec_suspend, + .resume = stac9766_codec_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_stac9766); + +MODULE_DESCRIPTION("ASoC stac9766 driver"); +MODULE_AUTHOR("Jon Smirl "); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/stac9766.h b/sound/soc/codecs/stac9766.h new file mode 100644 index 0000000..65642eb --- /dev/null +++ b/sound/soc/codecs/stac9766.h @@ -0,0 +1,21 @@ +/* + * stac9766.h -- STAC9766 Soc Audio driver + */ + +#ifndef _STAC9766_H +#define _STAC9766_H + +#define AC97_STAC_PAGE0 0x1000 +#define AC97_STAC_DA_CONTROL (AC97_STAC_PAGE0 | 0x6A) +#define AC97_STAC_ANALOG_SPECIAL (AC97_STAC_PAGE0 | 0x6E) +#define AC97_STAC_STEREO_MIC 0x78 + +/* STAC9766 DAI ID's */ +#define STAC9766_DAI_AC97_ANALOG 0 +#define STAC9766_DAI_AC97_DIGITAL 1 + +extern struct snd_soc_dai stac9766_dai[]; +extern struct snd_soc_codec_device soc_codec_dev_stac9766; + + +#endif diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index c3f4afb..0b8dcb5 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -86,7 +86,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg, */ if ((reg < 0 || reg > 9) && (reg != 15)) { - printk(KERN_WARNING "%s Invalid register R%d\n", __func__, reg); + printk(KERN_WARNING "%s Invalid register R%u\n", __func__, reg); return -1; } @@ -98,7 +98,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg, if (codec->hw_write(codec->control_data, data, 2) == 2) return 0; - printk(KERN_ERR "%s cannot write %03x to register R%d\n", __func__, + printk(KERN_ERR "%s cannot write %03x to register R%u\n", __func__, value, reg); return -EIO; @@ -273,14 +273,14 @@ static const unsigned short sr_valid_mask[] = { * Every divisor is a factor of 11*12 */ #define SR_MULT (11*12) -#define A(x) (x) ? (SR_MULT/x) : 0 +#define A(x) (SR_MULT/x) static const unsigned char sr_adc_mult_table[] = { - A(2), A(2), A(12), A(12), A(0), A(0), A(3), A(1), - A(2), A(2), A(11), A(11), A(0), A(0), A(0), A(1) + A(2), A(2), A(12), A(12), 0, 0, A(3), A(1), + A(2), A(2), A(11), A(11), 0, 0, 0, A(1) }; static const unsigned char sr_dac_mult_table[] = { - A(2), A(12), A(2), A(12), A(0), A(0), A(3), A(1), - A(2), A(11), A(2), A(11), A(0), A(0), A(0), A(1) + A(2), A(12), A(2), A(12), 0, 0, A(3), A(1), + A(2), A(11), A(2), A(11), 0, 0, 0, A(1) }; static unsigned get_score(int adc, int adc_l, int adc_h, int need_adc, @@ -523,6 +523,8 @@ static int tlv320aic23_set_dai_fmt(struct snd_soc_dai *codec_dai, case SND_SOC_DAIFMT_I2S: iface_reg |= TLV320AIC23_FOR_I2S; break; + case SND_SOC_DAIFMT_DSP_A: + iface_reg |= TLV320AIC23_LRP_ON; case SND_SOC_DAIFMT_DSP_B: iface_reg |= TLV320AIC23_FOR_DSP; break; diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index df7c8c2..4dbb853 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -115,6 +115,7 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = { 0x00, /* REG_VIBRA_PWM_SET (0x47) */ 0x00, /* REG_ANAMIC_GAIN (0x48) */ 0x00, /* REG_MISC_SET_2 (0x49) */ + 0x00, /* REG_SW_SHADOW (0x4A) - Shadow, non HW register */ }; /* codec private data */ @@ -125,6 +126,17 @@ struct twl4030_priv { struct snd_pcm_substream *master_substream; struct snd_pcm_substream *slave_substream; + + unsigned int configured; + unsigned int rate; + unsigned int sample_bits; + unsigned int channels; + + unsigned int sysclk; + + /* Headset output state handling */ + unsigned int hsl_enabled; + unsigned int hsr_enabled; }; /* @@ -161,7 +173,11 @@ static int twl4030_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int value) { twl4030_write_reg_cache(codec, reg, value); - return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg); + if (likely(reg < TWL4030_REG_SW_SHADOW)) + return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, + reg); + else + return 0; } static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable) @@ -188,6 +204,7 @@ static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable) static void twl4030_init_chip(struct snd_soc_codec *codec) { + u8 *cache = codec->reg_cache; int i; /* clear CODECPDZ prior to setting register defaults */ @@ -195,7 +212,7 @@ static void twl4030_init_chip(struct snd_soc_codec *codec) /* set all audio section registers to reasonable defaults */ for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++) - twl4030_write(codec, i, twl4030_reg[i]); + twl4030_write(codec, i, cache[i]); } @@ -232,7 +249,7 @@ static void twl4030_codec_mute(struct snd_soc_codec *codec, int mute) TWL4030_REG_PRECKL_CTL); reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL); twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, - reg_val & (~TWL4030_PRECKL_GAIN), + reg_val & (~TWL4030_PRECKR_GAIN), TWL4030_REG_PRECKR_CTL); /* Disable PLL */ @@ -316,104 +333,60 @@ static void twl4030_power_down(struct snd_soc_codec *codec) } /* Earpiece */ -static const char *twl4030_earpiece_texts[] = - {"Off", "DACL1", "DACL2", "DACR1"}; - -static const unsigned int twl4030_earpiece_values[] = - {0x0, 0x1, 0x2, 0x4}; - -static const struct soc_enum twl4030_earpiece_enum = - SOC_VALUE_ENUM_SINGLE(TWL4030_REG_EAR_CTL, 1, 0x7, - ARRAY_SIZE(twl4030_earpiece_texts), - twl4030_earpiece_texts, - twl4030_earpiece_values); - -static const struct snd_kcontrol_new twl4030_dapm_earpiece_control = -SOC_DAPM_VALUE_ENUM("Route", twl4030_earpiece_enum); +static const struct snd_kcontrol_new twl4030_dapm_earpiece_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_EAR_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_EAR_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_EAR_CTL, 2, 1, 0), + SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_EAR_CTL, 3, 1, 0), +}; /* PreDrive Left */ -static const char *twl4030_predrivel_texts[] = - {"Off", "DACL1", "DACL2", "DACR2"}; - -static const unsigned int twl4030_predrivel_values[] = - {0x0, 0x1, 0x2, 0x4}; - -static const struct soc_enum twl4030_predrivel_enum = - SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDL_CTL, 1, 0x7, - ARRAY_SIZE(twl4030_predrivel_texts), - twl4030_predrivel_texts, - twl4030_predrivel_values); - -static const struct snd_kcontrol_new twl4030_dapm_predrivel_control = -SOC_DAPM_VALUE_ENUM("Route", twl4030_predrivel_enum); +static const struct snd_kcontrol_new twl4030_dapm_predrivel_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDL_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PREDL_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDL_CTL, 2, 1, 0), + SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDL_CTL, 3, 1, 0), +}; /* PreDrive Right */ -static const char *twl4030_predriver_texts[] = - {"Off", "DACR1", "DACR2", "DACL2"}; - -static const unsigned int twl4030_predriver_values[] = - {0x0, 0x1, 0x2, 0x4}; - -static const struct soc_enum twl4030_predriver_enum = - SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDR_CTL, 1, 0x7, - ARRAY_SIZE(twl4030_predriver_texts), - twl4030_predriver_texts, - twl4030_predriver_values); - -static const struct snd_kcontrol_new twl4030_dapm_predriver_control = -SOC_DAPM_VALUE_ENUM("Route", twl4030_predriver_enum); +static const struct snd_kcontrol_new twl4030_dapm_predriver_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDR_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PREDR_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDR_CTL, 2, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDR_CTL, 3, 1, 0), +}; /* Headset Left */ -static const char *twl4030_hsol_texts[] = - {"Off", "DACL1", "DACL2"}; - -static const struct soc_enum twl4030_hsol_enum = - SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 1, - ARRAY_SIZE(twl4030_hsol_texts), - twl4030_hsol_texts); - -static const struct snd_kcontrol_new twl4030_dapm_hsol_control = -SOC_DAPM_ENUM("Route", twl4030_hsol_enum); +static const struct snd_kcontrol_new twl4030_dapm_hsol_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_HS_SEL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_HS_SEL, 2, 1, 0), +}; /* Headset Right */ -static const char *twl4030_hsor_texts[] = - {"Off", "DACR1", "DACR2"}; - -static const struct soc_enum twl4030_hsor_enum = - SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 4, - ARRAY_SIZE(twl4030_hsor_texts), - twl4030_hsor_texts); - -static const struct snd_kcontrol_new twl4030_dapm_hsor_control = -SOC_DAPM_ENUM("Route", twl4030_hsor_enum); +static const struct snd_kcontrol_new twl4030_dapm_hsor_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 3, 1, 0), + SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_HS_SEL, 4, 1, 0), + SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_HS_SEL, 5, 1, 0), +}; /* Carkit Left */ -static const char *twl4030_carkitl_texts[] = - {"Off", "DACL1", "DACL2"}; - -static const struct soc_enum twl4030_carkitl_enum = - SOC_ENUM_SINGLE(TWL4030_REG_PRECKL_CTL, 1, - ARRAY_SIZE(twl4030_carkitl_texts), - twl4030_carkitl_texts); - -static const struct snd_kcontrol_new twl4030_dapm_carkitl_control = -SOC_DAPM_ENUM("Route", twl4030_carkitl_enum); +static const struct snd_kcontrol_new twl4030_dapm_carkitl_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKL_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PRECKL_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PRECKL_CTL, 2, 1, 0), +}; /* Carkit Right */ -static const char *twl4030_carkitr_texts[] = - {"Off", "DACR1", "DACR2"}; - -static const struct soc_enum twl4030_carkitr_enum = - SOC_ENUM_SINGLE(TWL4030_REG_PRECKR_CTL, 1, - ARRAY_SIZE(twl4030_carkitr_texts), - twl4030_carkitr_texts); - -static const struct snd_kcontrol_new twl4030_dapm_carkitr_control = -SOC_DAPM_ENUM("Route", twl4030_carkitr_enum); +static const struct snd_kcontrol_new twl4030_dapm_carkitr_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKR_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PRECKR_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PRECKR_CTL, 2, 1, 0), +}; /* Handsfree Left */ static const char *twl4030_handsfreel_texts[] = - {"Voice", "DACL1", "DACL2", "DACR2"}; + {"Voice", "AudioL1", "AudioL2", "AudioR2"}; static const struct soc_enum twl4030_handsfreel_enum = SOC_ENUM_SINGLE(TWL4030_REG_HFL_CTL, 0, @@ -423,9 +396,13 @@ static const struct soc_enum twl4030_handsfreel_enum = static const struct snd_kcontrol_new twl4030_dapm_handsfreel_control = SOC_DAPM_ENUM("Route", twl4030_handsfreel_enum); +/* Handsfree Left virtual mute */ +static const struct snd_kcontrol_new twl4030_dapm_handsfreelmute_control = + SOC_DAPM_SINGLE("Switch", TWL4030_REG_SW_SHADOW, 0, 1, 0); + /* Handsfree Right */ static const char *twl4030_handsfreer_texts[] = - {"Voice", "DACR1", "DACR2", "DACL2"}; + {"Voice", "AudioR1", "AudioR2", "AudioL2"}; static const struct soc_enum twl4030_handsfreer_enum = SOC_ENUM_SINGLE(TWL4030_REG_HFR_CTL, 0, @@ -435,37 +412,48 @@ static const struct soc_enum twl4030_handsfreer_enum = static const struct snd_kcontrol_new twl4030_dapm_handsfreer_control = SOC_DAPM_ENUM("Route", twl4030_handsfreer_enum); -/* Left analog microphone selection */ -static const char *twl4030_analoglmic_texts[] = - {"Off", "Main mic", "Headset mic", "AUXL", "Carkit mic"}; +/* Handsfree Right virtual mute */ +static const struct snd_kcontrol_new twl4030_dapm_handsfreermute_control = + SOC_DAPM_SINGLE("Switch", TWL4030_REG_SW_SHADOW, 1, 1, 0); -static const unsigned int twl4030_analoglmic_values[] = - {0x0, 0x1, 0x2, 0x4, 0x8}; +/* Vibra */ +/* Vibra audio path selection */ +static const char *twl4030_vibra_texts[] = + {"AudioL1", "AudioR1", "AudioL2", "AudioR2"}; -static const struct soc_enum twl4030_analoglmic_enum = - SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICL, 0, 0xf, - ARRAY_SIZE(twl4030_analoglmic_texts), - twl4030_analoglmic_texts, - twl4030_analoglmic_values); +static const struct soc_enum twl4030_vibra_enum = + SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 2, + ARRAY_SIZE(twl4030_vibra_texts), + twl4030_vibra_texts); -static const struct snd_kcontrol_new twl4030_dapm_analoglmic_control = -SOC_DAPM_VALUE_ENUM("Route", twl4030_analoglmic_enum); +static const struct snd_kcontrol_new twl4030_dapm_vibra_control = +SOC_DAPM_ENUM("Route", twl4030_vibra_enum); -/* Right analog microphone selection */ -static const char *twl4030_analogrmic_texts[] = - {"Off", "Sub mic", "AUXR"}; +/* Vibra path selection: local vibrator (PWM) or audio driven */ +static const char *twl4030_vibrapath_texts[] = + {"Local vibrator", "Audio"}; -static const unsigned int twl4030_analogrmic_values[] = - {0x0, 0x1, 0x4}; +static const struct soc_enum twl4030_vibrapath_enum = + SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 4, + ARRAY_SIZE(twl4030_vibrapath_texts), + twl4030_vibrapath_texts); -static const struct soc_enum twl4030_analogrmic_enum = - SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICR, 0, 0x5, - ARRAY_SIZE(twl4030_analogrmic_texts), - twl4030_analogrmic_texts, - twl4030_analogrmic_values); +static const struct snd_kcontrol_new twl4030_dapm_vibrapath_control = +SOC_DAPM_ENUM("Route", twl4030_vibrapath_enum); -static const struct snd_kcontrol_new twl4030_dapm_analogrmic_control = -SOC_DAPM_VALUE_ENUM("Route", twl4030_analogrmic_enum); +/* Left analog microphone selection */ +static const struct snd_kcontrol_new twl4030_dapm_analoglmic_controls[] = { + SOC_DAPM_SINGLE("Main mic", TWL4030_REG_ANAMICL, 0, 1, 0), + SOC_DAPM_SINGLE("Headset mic", TWL4030_REG_ANAMICL, 1, 1, 0), + SOC_DAPM_SINGLE("AUXL", TWL4030_REG_ANAMICL, 2, 1, 0), + SOC_DAPM_SINGLE("Carkit mic", TWL4030_REG_ANAMICL, 3, 1, 0), +}; + +/* Right analog microphone selection */ +static const struct snd_kcontrol_new twl4030_dapm_analogrmic_controls[] = { + SOC_DAPM_SINGLE("Sub mic", TWL4030_REG_ANAMICR, 0, 1, 0), + SOC_DAPM_SINGLE("AUXR", TWL4030_REG_ANAMICR, 2, 1, 0), +}; /* TX1 L/R Analog/Digital microphone selection */ static const char *twl4030_micpathtx1_texts[] = @@ -507,6 +495,10 @@ static const struct snd_kcontrol_new twl4030_dapm_abypassr2_control = static const struct snd_kcontrol_new twl4030_dapm_abypassl2_control = SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXL2_APGA_CTL, 2, 1, 0); +/* Analog bypass for Voice */ +static const struct snd_kcontrol_new twl4030_dapm_abypassv_control = + SOC_DAPM_SINGLE("Switch", TWL4030_REG_VDL_APGA_CTL, 2, 1, 0); + /* Digital bypass gain, 0 mutes the bypass */ static const unsigned int twl4030_dapm_dbypass_tlv[] = { TLV_DB_RANGE_HEAD(2), @@ -526,6 +518,18 @@ static const struct snd_kcontrol_new twl4030_dapm_dbypassr_control = TWL4030_REG_ATX2ARXPGA, 0, 7, 0, twl4030_dapm_dbypass_tlv); +/* + * Voice Sidetone GAIN volume control: + * from -51 to -10 dB in 1 dB steps (mute instead of -51 dB) + */ +static DECLARE_TLV_DB_SCALE(twl4030_dapm_dbypassv_tlv, -5100, 100, 1); + +/* Digital bypass voice: sidetone (VUL -> VDL)*/ +static const struct snd_kcontrol_new twl4030_dapm_dbypassv_control = + SOC_DAPM_SINGLE_TLV("Volume", + TWL4030_REG_VSTPGA, 0, 0x29, 0, + twl4030_dapm_dbypassv_tlv); + static int micpath_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -556,63 +560,143 @@ static int micpath_event(struct snd_soc_dapm_widget *w, return 0; } -static int handsfree_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) +static void handsfree_ramp(struct snd_soc_codec *codec, int reg, int ramp) { - struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value; unsigned char hs_ctl; - hs_ctl = twl4030_read_reg_cache(w->codec, e->reg); + hs_ctl = twl4030_read_reg_cache(codec, reg); - if (hs_ctl & TWL4030_HF_CTL_REF_EN) { + if (ramp) { + /* HF ramp-up */ + hs_ctl |= TWL4030_HF_CTL_REF_EN; + twl4030_write(codec, reg, hs_ctl); + udelay(10); hs_ctl |= TWL4030_HF_CTL_RAMP_EN; - twl4030_write(w->codec, e->reg, hs_ctl); + twl4030_write(codec, reg, hs_ctl); + udelay(40); hs_ctl |= TWL4030_HF_CTL_LOOP_EN; - twl4030_write(w->codec, e->reg, hs_ctl); hs_ctl |= TWL4030_HF_CTL_HB_EN; - twl4030_write(w->codec, e->reg, hs_ctl); + twl4030_write(codec, reg, hs_ctl); } else { - hs_ctl &= ~(TWL4030_HF_CTL_RAMP_EN | TWL4030_HF_CTL_LOOP_EN - | TWL4030_HF_CTL_HB_EN); - twl4030_write(w->codec, e->reg, hs_ctl); + /* HF ramp-down */ + hs_ctl &= ~TWL4030_HF_CTL_LOOP_EN; + hs_ctl &= ~TWL4030_HF_CTL_HB_EN; + twl4030_write(codec, reg, hs_ctl); + hs_ctl &= ~TWL4030_HF_CTL_RAMP_EN; + twl4030_write(codec, reg, hs_ctl); + udelay(40); + hs_ctl &= ~TWL4030_HF_CTL_REF_EN; + twl4030_write(codec, reg, hs_ctl); } +} +static int handsfreelpga_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + switch (event) { + case SND_SOC_DAPM_POST_PMU: + handsfree_ramp(w->codec, TWL4030_REG_HFL_CTL, 1); + break; + case SND_SOC_DAPM_POST_PMD: + handsfree_ramp(w->codec, TWL4030_REG_HFL_CTL, 0); + break; + } return 0; } -static int headsetl_event(struct snd_soc_dapm_widget *w, +static int handsfreerpga_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { + switch (event) { + case SND_SOC_DAPM_POST_PMU: + handsfree_ramp(w->codec, TWL4030_REG_HFR_CTL, 1); + break; + case SND_SOC_DAPM_POST_PMD: + handsfree_ramp(w->codec, TWL4030_REG_HFR_CTL, 0); + break; + } + return 0; +} + +static void headset_ramp(struct snd_soc_codec *codec, int ramp) +{ unsigned char hs_gain, hs_pop; + struct twl4030_priv *twl4030 = codec->private_data; + /* Base values for ramp delay calculation: 2^19 - 2^26 */ + unsigned int ramp_base[] = {524288, 1048576, 2097152, 4194304, + 8388608, 16777216, 33554432, 67108864}; - /* Save the current volume */ - hs_gain = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_GAIN_SET); - hs_pop = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_POPN_SET); + hs_gain = twl4030_read_reg_cache(codec, TWL4030_REG_HS_GAIN_SET); + hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET); - switch (event) { - case SND_SOC_DAPM_POST_PMU: - /* Do the anti-pop/bias ramp enable according to the TRM */ + if (ramp) { + /* Headset ramp-up according to the TRM */ hs_pop |= TWL4030_VMID_EN; - twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); - /* Is this needed? Can we just use whatever gain here? */ - twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET, - (hs_gain & (~0x0f)) | 0x0a); + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop); + twl4030_write(codec, TWL4030_REG_HS_GAIN_SET, hs_gain); hs_pop |= TWL4030_RAMP_EN; - twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); - - /* Restore the original volume */ - twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET, hs_gain); - break; - case SND_SOC_DAPM_POST_PMD: - /* Do the anti-pop/bias ramp disable according to the TRM */ + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop); + } else { + /* Headset ramp-down _not_ according to + * the TRM, but in a way that it is working */ hs_pop &= ~TWL4030_RAMP_EN; - twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop); + /* Wait ramp delay time + 1, so the VMID can settle */ + mdelay((ramp_base[(hs_pop & TWL4030_RAMP_DELAY) >> 2] / + twl4030->sysclk) + 1); /* Bypass the reg_cache to mute the headset */ twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, hs_gain & (~0x0f), TWL4030_REG_HS_GAIN_SET); + hs_pop &= ~TWL4030_VMID_EN; - twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop); + } +} + +static int headsetlpga_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct twl4030_priv *twl4030 = w->codec->private_data; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /* Do the ramp-up only once */ + if (!twl4030->hsr_enabled) + headset_ramp(w->codec, 1); + + twl4030->hsl_enabled = 1; + break; + case SND_SOC_DAPM_POST_PMD: + /* Do the ramp-down only if both headsetL/R is disabled */ + if (!twl4030->hsr_enabled) + headset_ramp(w->codec, 0); + + twl4030->hsl_enabled = 0; + break; + } + return 0; +} + +static int headsetrpga_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct twl4030_priv *twl4030 = w->codec->private_data; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /* Do the ramp-up only once */ + if (!twl4030->hsl_enabled) + headset_ramp(w->codec, 1); + + twl4030->hsr_enabled = 1; + break; + case SND_SOC_DAPM_POST_PMD: + /* Do the ramp-down only if both headsetL/R is disabled */ + if (!twl4030->hsl_enabled) + headset_ramp(w->codec, 0); + + twl4030->hsr_enabled = 0; break; } return 0; @@ -624,7 +708,7 @@ static int bypass_event(struct snd_soc_dapm_widget *w, struct soc_mixer_control *m = (struct soc_mixer_control *)w->kcontrols->private_value; struct twl4030_priv *twl4030 = w->codec->private_data; - unsigned char reg; + unsigned char reg, misc; reg = twl4030_read_reg_cache(w->codec, m->reg); @@ -636,14 +720,34 @@ static int bypass_event(struct snd_soc_dapm_widget *w, else twl4030->bypass_state &= ~(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL)); + } else if (m->reg == TWL4030_REG_VDL_APGA_CTL) { + /* Analog voice bypass */ + if (reg & (1 << m->shift)) + twl4030->bypass_state |= (1 << 4); + else + twl4030->bypass_state &= ~(1 << 4); + } else if (m->reg == TWL4030_REG_VSTPGA) { + /* Voice digital bypass */ + if (reg) + twl4030->bypass_state |= (1 << 5); + else + twl4030->bypass_state &= ~(1 << 5); } else { /* Digital bypass */ if (reg & (0x7 << m->shift)) - twl4030->bypass_state |= (1 << (m->shift ? 5 : 4)); + twl4030->bypass_state |= (1 << (m->shift ? 7 : 6)); else - twl4030->bypass_state &= ~(1 << (m->shift ? 5 : 4)); + twl4030->bypass_state &= ~(1 << (m->shift ? 7 : 6)); } + /* Enable master analog loopback mode if any analog switch is enabled*/ + misc = twl4030_read_reg_cache(w->codec, TWL4030_REG_MISC_SET_1); + if (twl4030->bypass_state & 0x1F) + misc |= TWL4030_FMLOOP_EN; + else + misc &= ~TWL4030_FMLOOP_EN; + twl4030_write(w->codec, TWL4030_REG_MISC_SET_1, misc); + if (w->codec->bias_level == SND_SOC_BIAS_STANDBY) { if (twl4030->bypass_state) twl4030_codec_mute(w->codec, 0); @@ -810,6 +914,48 @@ static int snd_soc_put_volsw_r2_twl4030(struct snd_kcontrol *kcontrol, return err; } +/* Codec operation modes */ +static const char *twl4030_op_modes_texts[] = { + "Option 2 (voice/audio)", "Option 1 (audio)" +}; + +static const struct soc_enum twl4030_op_modes_enum = + SOC_ENUM_SINGLE(TWL4030_REG_CODEC_MODE, 0, + ARRAY_SIZE(twl4030_op_modes_texts), + twl4030_op_modes_texts); + +int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct twl4030_priv *twl4030 = codec->private_data; + struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; + unsigned short val; + unsigned short mask, bitmask; + + if (twl4030->configured) { + printk(KERN_ERR "twl4030 operation mode cannot be " + "changed on-the-fly\n"); + return -EBUSY; + } + + for (bitmask = 1; bitmask < e->max; bitmask <<= 1) + ; + if (ucontrol->value.enumerated.item[0] > e->max - 1) + return -EINVAL; + + val = ucontrol->value.enumerated.item[0] << e->shift_l; + mask = (bitmask - 1) << e->shift_l; + if (e->shift_l != e->shift_r) { + if (ucontrol->value.enumerated.item[1] > e->max - 1) + return -EINVAL; + val |= ucontrol->value.enumerated.item[1] << e->shift_r; + mask |= (bitmask - 1) << e->shift_r; + } + + return snd_soc_update_bits(codec, e->reg, mask, val); +} + /* * FGAIN volume control: * from -62 to 0 dB in 1 dB steps (mute instead of -63 dB) @@ -824,6 +970,12 @@ static DECLARE_TLV_DB_SCALE(digital_fine_tlv, -6300, 100, 1); static DECLARE_TLV_DB_SCALE(digital_coarse_tlv, 0, 600, 0); /* + * Voice Downlink GAIN volume control: + * from -37 to 12 dB in 1 dB steps (mute instead of -37 dB) + */ +static DECLARE_TLV_DB_SCALE(digital_voice_downlink_tlv, -3700, 100, 1); + +/* * Analog playback gain * -24 dB to 12 dB in 2 dB steps */ @@ -864,7 +1016,32 @@ static const struct soc_enum twl4030_rampdelay_enum = ARRAY_SIZE(twl4030_rampdelay_texts), twl4030_rampdelay_texts); +/* Vibra H-bridge direction mode */ +static const char *twl4030_vibradirmode_texts[] = { + "Vibra H-bridge direction", "Audio data MSB", +}; + +static const struct soc_enum twl4030_vibradirmode_enum = + SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 5, + ARRAY_SIZE(twl4030_vibradirmode_texts), + twl4030_vibradirmode_texts); + +/* Vibra H-bridge direction */ +static const char *twl4030_vibradir_texts[] = { + "Positive polarity", "Negative polarity", +}; + +static const struct soc_enum twl4030_vibradir_enum = + SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 1, + ARRAY_SIZE(twl4030_vibradir_texts), + twl4030_vibradir_texts); + static const struct snd_kcontrol_new twl4030_snd_controls[] = { + /* Codec operation mode control */ + SOC_ENUM_EXT("Codec Operation Mode", twl4030_op_modes_enum, + snd_soc_get_enum_double, + snd_soc_put_twl4030_opmode_enum_double), + /* Common playback gain controls */ SOC_DOUBLE_R_TLV("DAC1 Digital Fine Playback Volume", TWL4030_REG_ARXL1PGA, TWL4030_REG_ARXR1PGA, @@ -893,6 +1070,16 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = { TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL, 1, 1, 0), + /* Common voice downlink gain controls */ + SOC_SINGLE_TLV("DAC Voice Digital Downlink Volume", + TWL4030_REG_VRXPGA, 0, 0x31, 0, digital_voice_downlink_tlv), + + SOC_SINGLE_TLV("DAC Voice Analog Downlink Volume", + TWL4030_REG_VDL_APGA_CTL, 3, 0x12, 1, analog_tlv), + + SOC_SINGLE("DAC Voice Analog Downlink Switch", + TWL4030_REG_VDL_APGA_CTL, 1, 1, 0), + /* Separate output gain controls */ SOC_DOUBLE_R_TLV_TWL4030("PreDriv Playback Volume", TWL4030_REG_PREDL_CTL, TWL4030_REG_PREDR_CTL, @@ -920,6 +1107,9 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = { 0, 3, 5, 0, input_gain_tlv), SOC_ENUM("HS ramp delay", twl4030_rampdelay_enum), + + SOC_ENUM("Vibra H-bridge mode", twl4030_vibradirmode_enum), + SOC_ENUM("Vibra H-bridge direction", twl4030_vibradir_enum), }; static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { @@ -947,26 +1137,19 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("CARKITR"), SND_SOC_DAPM_OUTPUT("HFL"), SND_SOC_DAPM_OUTPUT("HFR"), + SND_SOC_DAPM_OUTPUT("VIBRA"), /* DACs */ - SND_SOC_DAPM_DAC("DAC Right1", "Right Front Playback", + SND_SOC_DAPM_DAC("DAC Right1", "Right Front HiFi Playback", SND_SOC_NOPM, 0, 0), - SND_SOC_DAPM_DAC("DAC Left1", "Left Front Playback", + SND_SOC_DAPM_DAC("DAC Left1", "Left Front HiFi Playback", SND_SOC_NOPM, 0, 0), - SND_SOC_DAPM_DAC("DAC Right2", "Right Rear Playback", + SND_SOC_DAPM_DAC("DAC Right2", "Right Rear HiFi Playback", SND_SOC_NOPM, 0, 0), - SND_SOC_DAPM_DAC("DAC Left2", "Left Rear Playback", + SND_SOC_DAPM_DAC("DAC Left2", "Left Rear HiFi Playback", + SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC("DAC Voice", "Voice Playback", SND_SOC_NOPM, 0, 0), - - /* Analog PGAs */ - SND_SOC_DAPM_PGA("ARXR1_APGA", TWL4030_REG_ARXR1_APGA_CTL, - 0, 0, NULL, 0), - SND_SOC_DAPM_PGA("ARXL1_APGA", TWL4030_REG_ARXL1_APGA_CTL, - 0, 0, NULL, 0), - SND_SOC_DAPM_PGA("ARXR2_APGA", TWL4030_REG_ARXR2_APGA_CTL, - 0, 0, NULL, 0), - SND_SOC_DAPM_PGA("ARXL2_APGA", TWL4030_REG_ARXL2_APGA_CTL, - 0, 0, NULL, 0), /* Analog bypasses */ SND_SOC_DAPM_SWITCH_E("Right1 Analog Loopback", SND_SOC_NOPM, 0, 0, @@ -981,6 +1164,9 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_SWITCH_E("Left2 Analog Loopback", SND_SOC_NOPM, 0, 0, &twl4030_dapm_abypassl2_control, bypass_event, SND_SOC_DAPM_POST_REG), + SND_SOC_DAPM_SWITCH_E("Voice Analog Loopback", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_abypassv_control, + bypass_event, SND_SOC_DAPM_POST_REG), /* Digital bypasses */ SND_SOC_DAPM_SWITCH_E("Left Digital Loopback", SND_SOC_NOPM, 0, 0, @@ -989,43 +1175,88 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_SWITCH_E("Right Digital Loopback", SND_SOC_NOPM, 0, 0, &twl4030_dapm_dbypassr_control, bypass_event, SND_SOC_DAPM_POST_REG), + SND_SOC_DAPM_SWITCH_E("Voice Digital Loopback", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_dbypassv_control, bypass_event, + SND_SOC_DAPM_POST_REG), - SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer", TWL4030_REG_AVDAC_CTL, - 0, 0, NULL, 0), - SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer", TWL4030_REG_AVDAC_CTL, - 1, 0, NULL, 0), - SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer", TWL4030_REG_AVDAC_CTL, - 2, 0, NULL, 0), - SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer", TWL4030_REG_AVDAC_CTL, - 3, 0, NULL, 0), - - /* Output MUX controls */ + /* Digital mixers, power control for the physical DACs */ + SND_SOC_DAPM_MIXER("Digital R1 Playback Mixer", + TWL4030_REG_AVDAC_CTL, 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Digital L1 Playback Mixer", + TWL4030_REG_AVDAC_CTL, 1, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Digital R2 Playback Mixer", + TWL4030_REG_AVDAC_CTL, 2, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Digital L2 Playback Mixer", + TWL4030_REG_AVDAC_CTL, 3, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Digital Voice Playback Mixer", + TWL4030_REG_AVDAC_CTL, 4, 0, NULL, 0), + + /* Analog mixers, power control for the physical PGAs */ + SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer", + TWL4030_REG_ARXR1_APGA_CTL, 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer", + TWL4030_REG_ARXL1_APGA_CTL, 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer", + TWL4030_REG_ARXR2_APGA_CTL, 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer", + TWL4030_REG_ARXL2_APGA_CTL, 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Analog Voice Playback Mixer", + TWL4030_REG_VDL_APGA_CTL, 0, 0, NULL, 0), + + /* Output MIXER controls */ /* Earpiece */ - SND_SOC_DAPM_VALUE_MUX("Earpiece Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_earpiece_control), + SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_earpiece_controls[0], + ARRAY_SIZE(twl4030_dapm_earpiece_controls)), /* PreDrivL/R */ - SND_SOC_DAPM_VALUE_MUX("PredriveL Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_predrivel_control), - SND_SOC_DAPM_VALUE_MUX("PredriveR Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_predriver_control), + SND_SOC_DAPM_MIXER("PredriveL Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_predrivel_controls[0], + ARRAY_SIZE(twl4030_dapm_predrivel_controls)), + SND_SOC_DAPM_MIXER("PredriveR Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_predriver_controls[0], + ARRAY_SIZE(twl4030_dapm_predriver_controls)), /* HeadsetL/R */ - SND_SOC_DAPM_MUX_E("HeadsetL Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_hsol_control, headsetl_event, - SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), - SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_hsor_control), + SND_SOC_DAPM_MIXER("HeadsetL Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_hsol_controls[0], + ARRAY_SIZE(twl4030_dapm_hsol_controls)), + SND_SOC_DAPM_PGA_E("HeadsetL PGA", SND_SOC_NOPM, + 0, 0, NULL, 0, headsetlpga_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MIXER("HeadsetR Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_hsor_controls[0], + ARRAY_SIZE(twl4030_dapm_hsor_controls)), + SND_SOC_DAPM_PGA_E("HeadsetR PGA", SND_SOC_NOPM, + 0, 0, NULL, 0, headsetrpga_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), /* CarkitL/R */ - SND_SOC_DAPM_MUX("CarkitL Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_carkitl_control), - SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_carkitr_control), + SND_SOC_DAPM_MIXER("CarkitL Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_carkitl_controls[0], + ARRAY_SIZE(twl4030_dapm_carkitl_controls)), + SND_SOC_DAPM_MIXER("CarkitR Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_carkitr_controls[0], + ARRAY_SIZE(twl4030_dapm_carkitr_controls)), + + /* Output MUX controls */ /* HandsfreeL/R */ - SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0, - &twl4030_dapm_handsfreel_control, handsfree_event, - SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), - SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0, - &twl4030_dapm_handsfreer_control, handsfree_event, - SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("HandsfreeL Mux", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_handsfreel_control), + SND_SOC_DAPM_SWITCH("HandsfreeL Switch", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_handsfreelmute_control), + SND_SOC_DAPM_PGA_E("HandsfreeL PGA", SND_SOC_NOPM, + 0, 0, NULL, 0, handsfreelpga_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("HandsfreeR Mux", SND_SOC_NOPM, 5, 0, + &twl4030_dapm_handsfreer_control), + SND_SOC_DAPM_SWITCH("HandsfreeR Switch", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_handsfreermute_control), + SND_SOC_DAPM_PGA_E("HandsfreeR PGA", SND_SOC_NOPM, + 0, 0, NULL, 0, handsfreerpga_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), + /* Vibra */ + SND_SOC_DAPM_MUX("Vibra Mux", TWL4030_REG_VIBRA_CTL, 0, 0, + &twl4030_dapm_vibra_control), + SND_SOC_DAPM_MUX("Vibra Route", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_vibrapath_control), /* Introducing four virtual ADC, since TWL4030 have four channel for capture */ @@ -1050,11 +1281,15 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD| SND_SOC_DAPM_POST_REG), - /* Analog input muxes with switch for the capture amplifiers */ - SND_SOC_DAPM_VALUE_MUX("Analog Left Capture Route", - TWL4030_REG_ANAMICL, 4, 0, &twl4030_dapm_analoglmic_control), - SND_SOC_DAPM_VALUE_MUX("Analog Right Capture Route", - TWL4030_REG_ANAMICR, 4, 0, &twl4030_dapm_analogrmic_control), + /* Analog input mixers for the capture amplifiers */ + SND_SOC_DAPM_MIXER("Analog Left Capture Route", + TWL4030_REG_ANAMICL, 4, 0, + &twl4030_dapm_analoglmic_controls[0], + ARRAY_SIZE(twl4030_dapm_analoglmic_controls)), + SND_SOC_DAPM_MIXER("Analog Right Capture Route", + TWL4030_REG_ANAMICR, 4, 0, + &twl4030_dapm_analogrmic_controls[0], + ARRAY_SIZE(twl4030_dapm_analogrmic_controls)), SND_SOC_DAPM_PGA("ADC Physical Left", TWL4030_REG_AVADC_CTL, 3, 0, NULL, 0), @@ -1073,62 +1308,86 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { }; static const struct snd_soc_dapm_route intercon[] = { - {"Analog L1 Playback Mixer", NULL, "DAC Left1"}, - {"Analog R1 Playback Mixer", NULL, "DAC Right1"}, - {"Analog L2 Playback Mixer", NULL, "DAC Left2"}, - {"Analog R2 Playback Mixer", NULL, "DAC Right2"}, - - {"ARXL1_APGA", NULL, "Analog L1 Playback Mixer"}, - {"ARXR1_APGA", NULL, "Analog R1 Playback Mixer"}, - {"ARXL2_APGA", NULL, "Analog L2 Playback Mixer"}, - {"ARXR2_APGA", NULL, "Analog R2 Playback Mixer"}, + {"Digital L1 Playback Mixer", NULL, "DAC Left1"}, + {"Digital R1 Playback Mixer", NULL, "DAC Right1"}, + {"Digital L2 Playback Mixer", NULL, "DAC Left2"}, + {"Digital R2 Playback Mixer", NULL, "DAC Right2"}, + {"Digital Voice Playback Mixer", NULL, "DAC Voice"}, + + {"Analog L1 Playback Mixer", NULL, "Digital L1 Playback Mixer"}, + {"Analog R1 Playback Mixer", NULL, "Digital R1 Playback Mixer"}, + {"Analog L2 Playback Mixer", NULL, "Digital L2 Playback Mixer"}, + {"Analog R2 Playback Mixer", NULL, "Digital R2 Playback Mixer"}, + {"Analog Voice Playback Mixer", NULL, "Digital Voice Playback Mixer"}, /* Internal playback routings */ /* Earpiece */ - {"Earpiece Mux", "DACL1", "ARXL1_APGA"}, - {"Earpiece Mux", "DACL2", "ARXL2_APGA"}, - {"Earpiece Mux", "DACR1", "ARXR1_APGA"}, + {"Earpiece Mixer", "Voice", "Analog Voice Playback Mixer"}, + {"Earpiece Mixer", "AudioL1", "Analog L1 Playback Mixer"}, + {"Earpiece Mixer", "AudioL2", "Analog L2 Playback Mixer"}, + {"Earpiece Mixer", "AudioR1", "Analog R1 Playback Mixer"}, /* PreDrivL */ - {"PredriveL Mux", "DACL1", "ARXL1_APGA"}, - {"PredriveL Mux", "DACL2", "ARXL2_APGA"}, - {"PredriveL Mux", "DACR2", "ARXR2_APGA"}, + {"PredriveL Mixer", "Voice", "Analog Voice Playback Mixer"}, + {"PredriveL Mixer", "AudioL1", "Analog L1 Playback Mixer"}, + {"PredriveL Mixer", "AudioL2", "Analog L2 Playback Mixer"}, + {"PredriveL Mixer", "AudioR2", "Analog R2 Playback Mixer"}, /* PreDrivR */ - {"PredriveR Mux", "DACR1", "ARXR1_APGA"}, - {"PredriveR Mux", "DACR2", "ARXR2_APGA"}, - {"PredriveR Mux", "DACL2", "ARXL2_APGA"}, + {"PredriveR Mixer", "Voice", "Analog Voice Playback Mixer"}, + {"PredriveR Mixer", "AudioR1", "Analog R1 Playback Mixer"}, + {"PredriveR Mixer", "AudioR2", "Analog R2 Playback Mixer"}, + {"PredriveR Mixer", "AudioL2", "Analog L2 Playback Mixer"}, /* HeadsetL */ - {"HeadsetL Mux", "DACL1", "ARXL1_APGA"}, - {"HeadsetL Mux", "DACL2", "ARXL2_APGA"}, + {"HeadsetL Mixer", "Voice", "Analog Voice Playback Mixer"}, + {"HeadsetL Mixer", "AudioL1", "Analog L1 Playback Mixer"}, + {"HeadsetL Mixer", "AudioL2", "Analog L2 Playback Mixer"}, + {"HeadsetL PGA", NULL, "HeadsetL Mixer"}, /* HeadsetR */ - {"HeadsetR Mux", "DACR1", "ARXR1_APGA"}, - {"HeadsetR Mux", "DACR2", "ARXR2_APGA"}, + {"HeadsetR Mixer", "Voice", "Analog Voice Playback Mixer"}, + {"HeadsetR Mixer", "AudioR1", "Analog R1 Playback Mixer"}, + {"HeadsetR Mixer", "AudioR2", "Analog R2 Playback Mixer"}, + {"HeadsetR PGA", NULL, "HeadsetR Mixer"}, /* CarkitL */ - {"CarkitL Mux", "DACL1", "ARXL1_APGA"}, - {"CarkitL Mux", "DACL2", "ARXL2_APGA"}, + {"CarkitL Mixer", "Voice", "Analog Voice Playback Mixer"}, + {"CarkitL Mixer", "AudioL1", "Analog L1 Playback Mixer"}, + {"CarkitL Mixer", "AudioL2", "Analog L2 Playback Mixer"}, /* CarkitR */ - {"CarkitR Mux", "DACR1", "ARXR1_APGA"}, - {"CarkitR Mux", "DACR2", "ARXR2_APGA"}, + {"CarkitR Mixer", "Voice", "Analog Voice Playback Mixer"}, + {"CarkitR Mixer", "AudioR1", "Analog R1 Playback Mixer"}, + {"CarkitR Mixer", "AudioR2", "Analog R2 Playback Mixer"}, /* HandsfreeL */ - {"HandsfreeL Mux", "DACL1", "ARXL1_APGA"}, - {"HandsfreeL Mux", "DACL2", "ARXL2_APGA"}, - {"HandsfreeL Mux", "DACR2", "ARXR2_APGA"}, + {"HandsfreeL Mux", "Voice", "Analog Voice Playback Mixer"}, + {"HandsfreeL Mux", "AudioL1", "Analog L1 Playback Mixer"}, + {"HandsfreeL Mux", "AudioL2", "Analog L2 Playback Mixer"}, + {"HandsfreeL Mux", "AudioR2", "Analog R2 Playback Mixer"}, + {"HandsfreeL Switch", "Switch", "HandsfreeL Mux"}, + {"HandsfreeL PGA", NULL, "HandsfreeL Switch"}, /* HandsfreeR */ - {"HandsfreeR Mux", "DACR1", "ARXR1_APGA"}, - {"HandsfreeR Mux", "DACR2", "ARXR2_APGA"}, - {"HandsfreeR Mux", "DACL2", "ARXL2_APGA"}, + {"HandsfreeR Mux", "Voice", "Analog Voice Playback Mixer"}, + {"HandsfreeR Mux", "AudioR1", "Analog R1 Playback Mixer"}, + {"HandsfreeR Mux", "AudioR2", "Analog R2 Playback Mixer"}, + {"HandsfreeR Mux", "AudioL2", "Analog L2 Playback Mixer"}, + {"HandsfreeR Switch", "Switch", "HandsfreeR Mux"}, + {"HandsfreeR PGA", NULL, "HandsfreeR Switch"}, + /* Vibra */ + {"Vibra Mux", "AudioL1", "DAC Left1"}, + {"Vibra Mux", "AudioR1", "DAC Right1"}, + {"Vibra Mux", "AudioL2", "DAC Left2"}, + {"Vibra Mux", "AudioR2", "DAC Right2"}, /* outputs */ - {"OUTL", NULL, "ARXL2_APGA"}, - {"OUTR", NULL, "ARXR2_APGA"}, - {"EARPIECE", NULL, "Earpiece Mux"}, - {"PREDRIVEL", NULL, "PredriveL Mux"}, - {"PREDRIVER", NULL, "PredriveR Mux"}, - {"HSOL", NULL, "HeadsetL Mux"}, - {"HSOR", NULL, "HeadsetR Mux"}, - {"CARKITL", NULL, "CarkitL Mux"}, - {"CARKITR", NULL, "CarkitR Mux"}, - {"HFL", NULL, "HandsfreeL Mux"}, - {"HFR", NULL, "HandsfreeR Mux"}, + {"OUTL", NULL, "Analog L2 Playback Mixer"}, + {"OUTR", NULL, "Analog R2 Playback Mixer"}, + {"EARPIECE", NULL, "Earpiece Mixer"}, + {"PREDRIVEL", NULL, "PredriveL Mixer"}, + {"PREDRIVER", NULL, "PredriveR Mixer"}, + {"HSOL", NULL, "HeadsetL PGA"}, + {"HSOR", NULL, "HeadsetR PGA"}, + {"CARKITL", NULL, "CarkitL Mixer"}, + {"CARKITR", NULL, "CarkitR Mixer"}, + {"HFL", NULL, "HandsfreeL PGA"}, + {"HFR", NULL, "HandsfreeR PGA"}, + {"Vibra Route", "Audio", "Vibra Mux"}, + {"VIBRA", NULL, "Vibra Route"}, /* Capture path */ {"Analog Left Capture Route", "Main mic", "MAINMIC"}, @@ -1168,18 +1427,22 @@ static const struct snd_soc_dapm_route intercon[] = { {"Left1 Analog Loopback", "Switch", "Analog Left Capture Route"}, {"Right2 Analog Loopback", "Switch", "Analog Right Capture Route"}, {"Left2 Analog Loopback", "Switch", "Analog Left Capture Route"}, + {"Voice Analog Loopback", "Switch", "Analog Left Capture Route"}, {"Analog R1 Playback Mixer", NULL, "Right1 Analog Loopback"}, {"Analog L1 Playback Mixer", NULL, "Left1 Analog Loopback"}, {"Analog R2 Playback Mixer", NULL, "Right2 Analog Loopback"}, {"Analog L2 Playback Mixer", NULL, "Left2 Analog Loopback"}, + {"Analog Voice Playback Mixer", NULL, "Voice Analog Loopback"}, /* Digital bypass routes */ {"Right Digital Loopback", "Volume", "TX1 Capture Route"}, {"Left Digital Loopback", "Volume", "TX1 Capture Route"}, + {"Voice Digital Loopback", "Volume", "TX2 Capture Route"}, - {"Analog R2 Playback Mixer", NULL, "Right Digital Loopback"}, - {"Analog L2 Playback Mixer", NULL, "Left Digital Loopback"}, + {"Digital R2 Playback Mixer", NULL, "Right Digital Loopback"}, + {"Digital L2 Playback Mixer", NULL, "Left Digital Loopback"}, + {"Digital Voice Playback Mixer", NULL, "Voice Digital Loopback"}, }; @@ -1226,6 +1489,58 @@ static int twl4030_set_bias_level(struct snd_soc_codec *codec, return 0; } +static void twl4030_constraints(struct twl4030_priv *twl4030, + struct snd_pcm_substream *mst_substream) +{ + struct snd_pcm_substream *slv_substream; + + /* Pick the stream, which need to be constrained */ + if (mst_substream == twl4030->master_substream) + slv_substream = twl4030->slave_substream; + else if (mst_substream == twl4030->slave_substream) + slv_substream = twl4030->master_substream; + else /* This should not happen.. */ + return; + + /* Set the constraints according to the already configured stream */ + snd_pcm_hw_constraint_minmax(slv_substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + twl4030->rate, + twl4030->rate); + + snd_pcm_hw_constraint_minmax(slv_substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + twl4030->sample_bits, + twl4030->sample_bits); + + snd_pcm_hw_constraint_minmax(slv_substream->runtime, + SNDRV_PCM_HW_PARAM_CHANNELS, + twl4030->channels, + twl4030->channels); +} + +/* In case of 4 channel mode, the RX1 L/R for playback and the TX2 L/R for + * capture has to be enabled/disabled. */ +static void twl4030_tdm_enable(struct snd_soc_codec *codec, int direction, + int enable) +{ + u8 reg, mask; + + reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION); + + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + mask = TWL4030_ARXL1_VRX_EN | TWL4030_ARXR1_EN; + else + mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN; + + if (enable) + reg |= mask; + else + reg &= ~mask; + + twl4030_write(codec, TWL4030_REG_OPTION, reg); +} + static int twl4030_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -1234,26 +1549,25 @@ static int twl4030_startup(struct snd_pcm_substream *substream, struct snd_soc_codec *codec = socdev->card->codec; struct twl4030_priv *twl4030 = codec->private_data; - /* If we already have a playback or capture going then constrain - * this substream to match it. - */ if (twl4030->master_substream) { - struct snd_pcm_runtime *master_runtime; - master_runtime = twl4030->master_substream->runtime; - - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_RATE, - master_runtime->rate, - master_runtime->rate); - - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_SAMPLE_BITS, - master_runtime->sample_bits, - master_runtime->sample_bits); - twl4030->slave_substream = substream; - } else + /* The DAI has one configuration for playback and capture, so + * if the DAI has been already configured then constrain this + * substream to match it. */ + if (twl4030->configured) + twl4030_constraints(twl4030, twl4030->master_substream); + } else { + if (!(twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) & + TWL4030_OPTION_1)) { + /* In option2 4 channel is not supported, set the + * constraint for the first stream for channels, the + * second stream will 'inherit' this cosntraint */ + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_CHANNELS, + 2, 2); + } twl4030->master_substream = substream; + } return 0; } @@ -1270,6 +1584,17 @@ static void twl4030_shutdown(struct snd_pcm_substream *substream, twl4030->master_substream = twl4030->slave_substream; twl4030->slave_substream = NULL; + + /* If all streams are closed, or the remaining stream has not yet + * been configured than set the DAI as not configured. */ + if (!twl4030->master_substream) + twl4030->configured = 0; + else if (!twl4030->master_substream->runtime->channels) + twl4030->configured = 0; + + /* If the closing substream had 4 channel, do the necessary cleanup */ + if (substream->runtime->channels == 4) + twl4030_tdm_enable(codec, substream->stream, 0); } static int twl4030_hw_params(struct snd_pcm_substream *substream, @@ -1282,8 +1607,24 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream, struct twl4030_priv *twl4030 = codec->private_data; u8 mode, old_mode, format, old_format; - if (substream == twl4030->slave_substream) - /* Ignoring hw_params for slave substream */ + /* If the substream has 4 channel, do the necessary setup */ + if (params_channels(params) == 4) { + u8 format, mode; + + format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF); + mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE); + + /* Safety check: are we in the correct operating mode and + * the interface is in TDM mode? */ + if ((mode & TWL4030_OPTION_1) && + ((format & TWL4030_AIF_FORMAT) == TWL4030_AIF_FORMAT_TDM)) + twl4030_tdm_enable(codec, substream->stream, 1); + else + return -EINVAL; + } + + if (twl4030->configured) + /* Ignoring hw_params for already configured DAI */ return 0; /* bit rate */ @@ -1363,6 +1704,21 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream, /* set CODECPDZ afterwards */ twl4030_codec_enable(codec, 1); } + + /* Store the important parameters for the DAI configuration and set + * the DAI as configured */ + twl4030->configured = 1; + twl4030->rate = params_rate(params); + twl4030->sample_bits = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS)->min; + twl4030->channels = params_channels(params); + + /* If both playback and capture streams are open, and one of them + * is setting the hw parameters right now (since we are here), set + * constraints to the other stream to match the current one. */ + if (twl4030->slave_substream) + twl4030_constraints(twl4030, substream); + return 0; } @@ -1370,17 +1726,21 @@ static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) { struct snd_soc_codec *codec = codec_dai->codec; + struct twl4030_priv *twl4030 = codec->private_data; u8 infreq; switch (freq) { case 19200000: infreq = TWL4030_APLL_INFREQ_19200KHZ; + twl4030->sysclk = 19200; break; case 26000000: infreq = TWL4030_APLL_INFREQ_26000KHZ; + twl4030->sysclk = 26000; break; case 38400000: infreq = TWL4030_APLL_INFREQ_38400KHZ; + twl4030->sysclk = 38400; break; default: printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n", @@ -1424,6 +1784,9 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai, case SND_SOC_DAIFMT_I2S: format |= TWL4030_AIF_FORMAT_CODEC; break; + case SND_SOC_DAIFMT_DSP_A: + format |= TWL4030_AIF_FORMAT_TDM; + break; default: return -EINVAL; } @@ -1443,6 +1806,180 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai, return 0; } +/* In case of voice mode, the RX1 L(VRX) for downlink and the TX2 L/R + * (VTXL, VTXR) for uplink has to be enabled/disabled. */ +static void twl4030_voice_enable(struct snd_soc_codec *codec, int direction, + int enable) +{ + u8 reg, mask; + + reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION); + + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + mask = TWL4030_ARXL1_VRX_EN; + else + mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN; + + if (enable) + reg |= mask; + else + reg &= ~mask; + + twl4030_write(codec, TWL4030_REG_OPTION, reg); +} + +static int twl4030_voice_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + u8 infreq; + u8 mode; + + /* If the system master clock is not 26MHz, the voice PCM interface is + * not avilable. + */ + infreq = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL) + & TWL4030_APLL_INFREQ; + + if (infreq != TWL4030_APLL_INFREQ_26000KHZ) { + printk(KERN_ERR "TWL4030 voice startup: " + "MCLK is not 26MHz, call set_sysclk() on init\n"); + return -EINVAL; + } + + /* If the codec mode is not option2, the voice PCM interface is not + * avilable. + */ + mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) + & TWL4030_OPT_MODE; + + if (mode != TWL4030_OPTION_2) { + printk(KERN_ERR "TWL4030 voice startup: " + "the codec mode is not option2\n"); + return -EINVAL; + } + + return 0; +} + +static void twl4030_voice_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + + /* Enable voice digital filters */ + twl4030_voice_enable(codec, substream->stream, 0); +} + +static int twl4030_voice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + u8 old_mode, mode; + + /* Enable voice digital filters */ + twl4030_voice_enable(codec, substream->stream, 1); + + /* bit rate */ + old_mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) + & ~(TWL4030_CODECPDZ); + mode = old_mode; + + switch (params_rate(params)) { + case 8000: + mode &= ~(TWL4030_SEL_16K); + break; + case 16000: + mode |= TWL4030_SEL_16K; + break; + default: + printk(KERN_ERR "TWL4030 voice hw params: unknown rate %d\n", + params_rate(params)); + return -EINVAL; + } + + if (mode != old_mode) { + /* change rate and set CODECPDZ */ + twl4030_codec_enable(codec, 0); + twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode); + twl4030_codec_enable(codec, 1); + } + + return 0; +} + +static int twl4030_voice_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u8 infreq; + + switch (freq) { + case 26000000: + infreq = TWL4030_APLL_INFREQ_26000KHZ; + break; + default: + printk(KERN_ERR "TWL4030 voice set sysclk: unknown rate %d\n", + freq); + return -EINVAL; + } + + infreq |= TWL4030_APLL_EN; + twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq); + + return 0; +} + +static int twl4030_voice_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u8 old_format, format; + + /* get format */ + old_format = twl4030_read_reg_cache(codec, TWL4030_REG_VOICE_IF); + format = old_format; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFM: + format &= ~(TWL4030_VIF_SLAVE_EN); + break; + case SND_SOC_DAIFMT_CBS_CFS: + format |= TWL4030_VIF_SLAVE_EN; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_NF: + format &= ~(TWL4030_VIF_FORMAT); + break; + case SND_SOC_DAIFMT_NB_IF: + format |= TWL4030_VIF_FORMAT; + break; + default: + return -EINVAL; + } + + if (format != old_format) { + /* change format and set CODECPDZ */ + twl4030_codec_enable(codec, 0); + twl4030_write(codec, TWL4030_REG_VOICE_IF, format); + twl4030_codec_enable(codec, 1); + } + + return 0; +} + #define TWL4030_RATES (SNDRV_PCM_RATE_8000_48000) #define TWL4030_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE) @@ -1454,21 +1991,47 @@ static struct snd_soc_dai_ops twl4030_dai_ops = { .set_fmt = twl4030_set_dai_fmt, }; -struct snd_soc_dai twl4030_dai = { +static struct snd_soc_dai_ops twl4030_dai_voice_ops = { + .startup = twl4030_voice_startup, + .shutdown = twl4030_voice_shutdown, + .hw_params = twl4030_voice_hw_params, + .set_sysclk = twl4030_voice_set_dai_sysclk, + .set_fmt = twl4030_voice_set_dai_fmt, +}; + +struct snd_soc_dai twl4030_dai[] = { +{ .name = "twl4030", .playback = { - .stream_name = "Playback", + .stream_name = "HiFi Playback", .channels_min = 2, - .channels_max = 2, + .channels_max = 4, .rates = TWL4030_RATES | SNDRV_PCM_RATE_96000, .formats = TWL4030_FORMATS,}, .capture = { .stream_name = "Capture", .channels_min = 2, - .channels_max = 2, + .channels_max = 4, .rates = TWL4030_RATES, .formats = TWL4030_FORMATS,}, .ops = &twl4030_dai_ops, +}, +{ + .name = "twl4030 Voice", + .playback = { + .stream_name = "Voice Playback", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .ops = &twl4030_dai_voice_ops, +}, }; EXPORT_SYMBOL_GPL(twl4030_dai); @@ -1500,6 +2063,8 @@ static int twl4030_resume(struct platform_device *pdev) static int twl4030_init(struct snd_soc_device *socdev) { struct snd_soc_codec *codec = socdev->card->codec; + struct twl4030_setup_data *setup = socdev->codec_data; + struct twl4030_priv *twl4030 = codec->private_data; int ret = 0; printk(KERN_INFO "TWL4030 Audio Codec init \n"); @@ -1509,14 +2074,31 @@ static int twl4030_init(struct snd_soc_device *socdev) codec->read = twl4030_read_reg_cache; codec->write = twl4030_write; codec->set_bias_level = twl4030_set_bias_level; - codec->dai = &twl4030_dai; - codec->num_dai = 1; + codec->dai = twl4030_dai; + codec->num_dai = ARRAY_SIZE(twl4030_dai), codec->reg_cache_size = sizeof(twl4030_reg); codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg), GFP_KERNEL); if (codec->reg_cache == NULL) return -ENOMEM; + /* Configuration for headset ramp delay from setup data */ + if (setup) { + unsigned char hs_pop; + + if (setup->sysclk) + twl4030->sysclk = setup->sysclk; + else + twl4030->sysclk = 26000; + + hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET); + hs_pop &= ~TWL4030_RAMP_DELAY; + hs_pop |= (setup->ramp_delay_value << 2); + twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, hs_pop); + } else { + twl4030->sysclk = 26000; + } + /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { @@ -1604,13 +2186,13 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030); static int __init twl4030_modinit(void) { - return snd_soc_register_dai(&twl4030_dai); + return snd_soc_register_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai)); } module_init(twl4030_modinit); static void __exit twl4030_exit(void) { - snd_soc_unregister_dai(&twl4030_dai); + snd_soc_unregister_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai)); } module_exit(twl4030_exit); diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h index cb63765..fe5f395 100644 --- a/sound/soc/codecs/twl4030.h +++ b/sound/soc/codecs/twl4030.h @@ -92,8 +92,9 @@ #define TWL4030_REG_VIBRA_PWM_SET 0x47 #define TWL4030_REG_ANAMIC_GAIN 0x48 #define TWL4030_REG_MISC_SET_2 0x49 +#define TWL4030_REG_SW_SHADOW 0x4A -#define TWL4030_CACHEREGNUM (TWL4030_REG_MISC_SET_2 + 1) +#define TWL4030_CACHEREGNUM (TWL4030_REG_SW_SHADOW + 1) /* Bitfield Definitions */ @@ -110,9 +111,22 @@ #define TWL4030_APLL_RATE_44100 0x90 #define TWL4030_APLL_RATE_48000 0xA0 #define TWL4030_APLL_RATE_96000 0xE0 -#define TWL4030_SEL_16K 0x04 +#define TWL4030_SEL_16K 0x08 #define TWL4030_CODECPDZ 0x02 #define TWL4030_OPT_MODE 0x01 +#define TWL4030_OPTION_1 (1 << 0) +#define TWL4030_OPTION_2 (0 << 0) + +/* TWL4030_OPTION (0x02) Fields */ + +#define TWL4030_ATXL1_EN (1 << 0) +#define TWL4030_ATXR1_EN (1 << 1) +#define TWL4030_ATXL2_VTXL_EN (1 << 2) +#define TWL4030_ATXR2_VTXR_EN (1 << 3) +#define TWL4030_ARXL1_VRX_EN (1 << 4) +#define TWL4030_ARXR1_EN (1 << 5) +#define TWL4030_ARXL2_EN (1 << 6) +#define TWL4030_ARXR2_EN (1 << 7) /* TWL4030_REG_MICBIAS_CTL (0x04) Fields */ @@ -171,6 +185,17 @@ #define TWL4030_CLK256FS_EN 0x02 #define TWL4030_AIF_EN 0x01 +/* VOICE_IF (0x0F) Fields */ + +#define TWL4030_VIF_SLAVE_EN 0x80 +#define TWL4030_VIF_DIN_EN 0x40 +#define TWL4030_VIF_DOUT_EN 0x20 +#define TWL4030_VIF_SWAP 0x10 +#define TWL4030_VIF_FORMAT 0x08 +#define TWL4030_VIF_TRI_EN 0x04 +#define TWL4030_VIF_SUB_EN 0x02 +#define TWL4030_VIF_EN 0x01 + /* EAR_CTL (0x21) */ #define TWL4030_EAR_GAIN 0x30 @@ -236,7 +261,19 @@ #define TWL4030_SMOOTH_ANAVOL_EN 0x02 #define TWL4030_DIGMIC_LR_SWAP_EN 0x01 -extern struct snd_soc_dai twl4030_dai; +/* TWL4030_REG_SW_SHADOW (0x4A) Fields */ +#define TWL4030_HFL_EN 0x01 +#define TWL4030_HFR_EN 0x02 + +#define TWL4030_DAI_HIFI 0 +#define TWL4030_DAI_VOICE 1 + +extern struct snd_soc_dai twl4030_dai[2]; extern struct snd_soc_codec_device soc_codec_dev_twl4030; +struct twl4030_setup_data { + unsigned int ramp_delay_value; + unsigned int sysclk; +}; + #endif /* End of __TWL4030_AUDIO_H__ */ diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c index ddefb8f..269b108 100644 --- a/sound/soc/codecs/uda134x.c +++ b/sound/soc/codecs/uda134x.c @@ -101,7 +101,7 @@ static int uda134x_write(struct snd_soc_codec *codec, unsigned int reg, pr_debug("%s reg: %02X, value:%02X\n", __func__, reg, value); if (reg >= UDA134X_REGS_NUM) { - printk(KERN_ERR "%s unkown register: reg: %d", + printk(KERN_ERR "%s unkown register: reg: %u", __func__, reg); return -EINVAL; } @@ -296,7 +296,7 @@ static int uda134x_set_dai_sysclk(struct snd_soc_dai *codec_dai, struct snd_soc_codec *codec = codec_dai->codec; struct uda134x_priv *uda134x = codec->private_data; - pr_debug("%s clk_id: %d, freq: %d, dir: %d\n", __func__, + pr_debug("%s clk_id: %d, freq: %u, dir: %d\n", __func__, clk_id, freq, dir); /* Anything between 256fs*8Khz and 512fs*48Khz should be acceptable diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 0275321..e7348d3 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1108,7 +1108,7 @@ static int wm8350_set_fll(struct snd_soc_dai *codec_dai, if (ret < 0) return ret; dev_dbg(wm8350->dev, - "FLL in %d FLL out %d N 0x%x K 0x%x div %d ratio %d", + "FLL in %u FLL out %u N 0x%x K 0x%x div %d ratio %d", freq_in, freq_out, fll_div.n, fll_div.k, fll_div.div, fll_div.ratio); diff --git a/sound/soc/codecs/wm8350.h b/sound/soc/codecs/wm8350.h index d11bd92..d088eb4 100644 --- a/sound/soc/codecs/wm8350.h +++ b/sound/soc/codecs/wm8350.h @@ -13,6 +13,7 @@ #define _WM8350_H #include +#include extern struct snd_soc_dai wm8350_dai; extern struct snd_soc_codec_device soc_codec_dev_wm8350; diff --git a/sound/soc/codecs/wm8400.c b/sound/soc/codecs/wm8400.c index 510efa6..502eefa 100644 --- a/sound/soc/codecs/wm8400.c +++ b/sound/soc/codecs/wm8400.c @@ -954,7 +954,7 @@ static int fll_factors(struct wm8400_priv *wm8400, struct fll_factors *factors, factors->outdiv *= 2; if (factors->outdiv > 32) { dev_err(wm8400->wm8400->dev, - "Unsupported FLL output frequency %dHz\n", + "Unsupported FLL output frequency %uHz\n", Fout); return -EINVAL; } @@ -1003,7 +1003,7 @@ static int fll_factors(struct wm8400_priv *wm8400, struct fll_factors *factors, factors->k = K / 10; dev_dbg(wm8400->wm8400->dev, - "FLL: Fref=%d Fout=%d N=%x K=%x, FRATIO=%x OUTDIV=%x\n", + "FLL: Fref=%u Fout=%u N=%x K=%x, FRATIO=%x OUTDIV=%x\n", Fref, Fout, factors->n, factors->k, factors->fratio, factors->outdiv); @@ -1473,8 +1473,8 @@ static int wm8400_codec_probe(struct platform_device *dev) codec = &priv->codec; codec->private_data = priv; - codec->control_data = dev->dev.driver_data; - priv->wm8400 = dev->dev.driver_data; + codec->control_data = dev_get_drvdata(&dev->dev); + priv->wm8400 = dev_get_drvdata(&dev->dev); ret = regulator_bulk_get(priv->wm8400->dev, ARRAY_SIZE(power), &power[0]); diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index 6a4cea0..c8b8dba 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -298,7 +298,7 @@ static void pll_factors(unsigned int target, unsigned int source) if ((Ndiv < 6) || (Ndiv > 12)) printk(KERN_WARNING - "WM8510 N value %d outwith recommended range!d\n", + "WM8510 N value %u outwith recommended range!d\n", Ndiv); pll_div.n = Ndiv; diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index 9f6be3d..86c4b24 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -415,7 +415,7 @@ static int pll_factors(struct _pll_div *pll_div, unsigned int target, unsigned int K, Ndiv, Nmod; int i; - pr_debug("wm8580: PLL %dHz->%dHz\n", source, target); + pr_debug("wm8580: PLL %uHz->%uHz\n", source, target); /* Scale the output frequency up; the PLL should run in the * region of 90-100MHz. @@ -447,7 +447,7 @@ static int pll_factors(struct _pll_div *pll_div, unsigned int target, if ((Ndiv < 5) || (Ndiv > 13)) { printk(KERN_ERR - "WM8580 N=%d outside supported range\n", Ndiv); + "WM8580 N=%u outside supported range\n", Ndiv); return -EINVAL; } diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index e043e3f..7a20587 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -666,14 +666,14 @@ static int __devinit wm8731_spi_probe(struct spi_device *spi) codec->hw_write = (hw_write_t)wm8731_spi_write; codec->dev = &spi->dev; - spi->dev.driver_data = wm8731; + dev_set_drvdata(&spi->dev, wm8731); return wm8731_register(wm8731); } static int __devexit wm8731_spi_remove(struct spi_device *spi) { - struct wm8731_priv *wm8731 = spi->dev.driver_data; + struct wm8731_priv *wm8731 = dev_get_drvdata(&spi->dev); wm8731_unregister(wm8731); diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index a6e8f3f..d28eeac 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -703,7 +703,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int target, if ((Ndiv < 6) || (Ndiv > 12)) printk(KERN_WARNING - "wm8753: unsupported N = %d\n", Ndiv); + "wm8753: unsupported N = %u\n", Ndiv); pll_div->n = Ndiv; Nmod = target % source; @@ -1822,14 +1822,14 @@ static int __devinit wm8753_spi_probe(struct spi_device *spi) codec->hw_write = (hw_write_t)wm8753_spi_write; codec->dev = &spi->dev; - spi->dev.driver_data = wm8753; + dev_set_drvdata(&spi->dev, wm8753); return wm8753_register(wm8753); } static int __devexit wm8753_spi_remove(struct spi_device *spi) { - struct wm8753_priv *wm8753 = spi->dev.driver_data; + struct wm8753_priv *wm8753 = dev_get_drvdata(&spi->dev); wm8753_unregister(wm8753); return 0; } diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c index 46c5ea1..3c78945 100644 --- a/sound/soc/codecs/wm8900.c +++ b/sound/soc/codecs/wm8900.c @@ -778,11 +778,11 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, } if (target > 100000000) - printk(KERN_WARNING "wm8900: FLL rate %d out of range, Fref=%d" - " Fout=%d\n", target, Fref, Fout); + printk(KERN_WARNING "wm8900: FLL rate %u out of range, Fref=%u" + " Fout=%u\n", target, Fref, Fout); if (div > 32) { printk(KERN_ERR "wm8900: Invalid FLL division rate %u, " - "Fref=%d, Fout=%d, target=%d\n", + "Fref=%u, Fout=%u, target=%u\n", div, Fref, Fout, target); return -EINVAL; } diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 8cf571f..d8a9222 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -217,7 +217,6 @@ struct wm8903_priv { int sysclk; /* Reference counts */ - int charge_pump_users; int class_w_users; int playback_active; int capture_active; @@ -373,6 +372,15 @@ static void wm8903_reset(struct snd_soc_codec *codec) #define WM8903_OUTPUT_INT 0x2 #define WM8903_OUTPUT_IN 0x1 +static int wm8903_cp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + WARN_ON(event != SND_SOC_DAPM_POST_PMU); + mdelay(4); + + return 0; +} + /* * Event for headphone and line out amplifier power changes. Special * power up/down sequences are required in order to maximise pop/click @@ -382,19 +390,20 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; - struct wm8903_priv *wm8903 = codec->private_data; - struct i2c_client *i2c = codec->control_data; u16 val; u16 reg; + u16 dcs_reg; + u16 dcs_bit; int shift; - u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0); switch (w->reg) { case WM8903_POWER_MANAGEMENT_2: reg = WM8903_ANALOGUE_HP_0; + dcs_bit = 0 + w->shift; break; case WM8903_POWER_MANAGEMENT_3: reg = WM8903_ANALOGUE_LINEOUT_0; + dcs_bit = 2 + w->shift; break; default: BUG(); @@ -419,18 +428,6 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w, /* Short the output */ val &= ~(WM8903_OUTPUT_SHORT << shift); wm8903_write(codec, reg, val); - - wm8903->charge_pump_users++; - - dev_dbg(&i2c->dev, "Charge pump use count now %d\n", - wm8903->charge_pump_users); - - if (wm8903->charge_pump_users == 1) { - dev_dbg(&i2c->dev, "Enabling charge pump\n"); - wm8903_write(codec, WM8903_CHARGE_PUMP_0, - cp_reg | WM8903_CP_ENA); - mdelay(4); - } } if (event & SND_SOC_DAPM_POST_PMU) { @@ -446,6 +443,11 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w, val |= (WM8903_OUTPUT_OUT << shift); wm8903_write(codec, reg, val); + /* Enable the DC servo */ + dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0); + dcs_reg |= dcs_bit; + wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg); + /* Remove the short */ val |= (WM8903_OUTPUT_SHORT << shift); wm8903_write(codec, reg, val); @@ -458,25 +460,17 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w, val &= ~(WM8903_OUTPUT_SHORT << shift); wm8903_write(codec, reg, val); + /* Disable the DC servo */ + dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0); + dcs_reg &= ~dcs_bit; + wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg); + /* Then disable the intermediate and output stages */ val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT | WM8903_OUTPUT_IN) << shift); wm8903_write(codec, reg, val); } - if (event & SND_SOC_DAPM_POST_PMD) { - wm8903->charge_pump_users--; - - dev_dbg(&i2c->dev, "Charge pump use count now %d\n", - wm8903->charge_pump_users); - - if (wm8903->charge_pump_users == 0) { - dev_dbg(&i2c->dev, "Disabling charge pump\n"); - wm8903_write(codec, WM8903_CHARGE_PUMP_0, - cp_reg & ~WM8903_CP_ENA); - } - } - return 0; } @@ -539,6 +533,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, /* ALSA can only do steps of .01dB */ static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); +static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0); static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0); @@ -657,6 +652,16 @@ static const struct soc_enum rinput_inv_enum = SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text); +static const char *sidetone_text[] = { + "None", "Left", "Right" +}; + +static const struct soc_enum lsidetone_enum = + SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 2, 3, sidetone_text); + +static const struct soc_enum rsidetone_enum = + SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text); + static const struct snd_kcontrol_new wm8903_snd_controls[] = { /* Input PGAs - No TLV since the scale depends on PGA mode */ @@ -700,6 +705,9 @@ SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT, SOC_ENUM("ADC Companding Mode", adc_companding), SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0), +SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8, + 12, 0, digital_sidetone_tlv), + /* DAC */ SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT, WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), @@ -762,6 +770,12 @@ static const struct snd_kcontrol_new rinput_mux = static const struct snd_kcontrol_new rinput_inv_mux = SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum); +static const struct snd_kcontrol_new lsidetone_mux = + SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum); + +static const struct snd_kcontrol_new rsidetone_mux = + SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum); + static const struct snd_kcontrol_new left_output_mixer[] = { SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0), SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0), @@ -828,6 +842,9 @@ SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0), SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0), SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0), +SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux), +SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux), + SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0), SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0), @@ -844,26 +861,29 @@ SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0, SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, 1, 0, NULL, 0, wm8903_output_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, 0, 0, NULL, 0, wm8903_output_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0, NULL, 0, wm8903_output_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0, NULL, 0, wm8903_output_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, NULL, 0), SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0, + wm8903_cp_event, SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0), }; static const struct snd_soc_dapm_route intercon[] = { @@ -909,7 +929,19 @@ static const struct snd_soc_dapm_route intercon[] = { { "Right Input PGA", NULL, "Right Input Mode Mux" }, { "ADCL", NULL, "Left Input PGA" }, + { "ADCL", NULL, "CLK_DSP" }, { "ADCR", NULL, "Right Input PGA" }, + { "ADCR", NULL, "CLK_DSP" }, + + { "DACL Sidetone", "Left", "ADCL" }, + { "DACL Sidetone", "Right", "ADCR" }, + { "DACR Sidetone", "Left", "ADCL" }, + { "DACR Sidetone", "Right", "ADCR" }, + + { "DACL", NULL, "DACL Sidetone" }, + { "DACL", NULL, "CLK_DSP" }, + { "DACR", NULL, "DACR Sidetone" }, + { "DACR", NULL, "CLK_DSP" }, { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" }, { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" }, @@ -951,6 +983,11 @@ static const struct snd_soc_dapm_route intercon[] = { { "ROP", NULL, "Right Speaker PGA" }, { "RON", NULL, "Right Speaker PGA" }, + + { "Left Headphone Output PGA", NULL, "Charge Pump" }, + { "Right Headphone Output PGA", NULL, "Charge Pump" }, + { "Left Line Output PGA", NULL, "Charge Pump" }, + { "Right Line Output PGA", NULL, "Charge Pump" }, }; static int wm8903_add_widgets(struct snd_soc_codec *codec) @@ -985,6 +1022,11 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec, wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA); + /* Change DC servo dither level in startup sequence */ + wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11); + wm8903_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257); + wm8903_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2); + wm8903_run_sequence(codec, 0); wm8903_sync_reg_cache(codec, codec->reg_cache); @@ -1277,14 +1319,8 @@ static int wm8903_startup(struct snd_pcm_substream *substream, if (wm8903->master_substream) { master_runtime = wm8903->master_substream->runtime; - dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n", - master_runtime->sample_bits, - master_runtime->rate); - - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_RATE, - master_runtime->rate, - master_runtime->rate); + dev_dbg(&i2c->dev, "Constraining to %d bits\n", + master_runtime->sample_bits); snd_pcm_hw_constraint_minmax(substream->runtime, SNDRV_PCM_HW_PARAM_SAMPLE_BITS, @@ -1523,6 +1559,7 @@ struct snd_soc_dai wm8903_dai = { .formats = WM8903_FORMATS, }, .ops = &wm8903_dai_ops, + .symmetric_rates = 1, }; EXPORT_SYMBOL_GPL(wm8903_dai); diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c new file mode 100644 index 0000000..b8e17d6 --- /dev/null +++ b/sound/soc/codecs/wm8940.c @@ -0,0 +1,955 @@ +/* + * wm8940.c -- WM8940 ALSA Soc Audio driver + * + * Author: Jonathan Cameron + * + * Based on wm8510.c + * Copyright 2006 Wolfson Microelectronics PLC. + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Not currently handled: + * Notch filter control + * AUXMode (inverting vs mixer) + * No means to obtain current gain if alc enabled. + * No use made of gpio + * Fast VMID discharge for power down + * Soft Start + * DLR and ALR Swaps not enabled + * Digital Sidetone not supported + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "wm8940.h" + +struct wm8940_priv { + unsigned int sysclk; + u16 reg_cache[WM8940_CACHEREGNUM]; + struct snd_soc_codec codec; +}; + +static u16 wm8940_reg_defaults[] = { + 0x8940, /* Soft Reset */ + 0x0000, /* Power 1 */ + 0x0000, /* Power 2 */ + 0x0000, /* Power 3 */ + 0x0010, /* Interface Control */ + 0x0000, /* Companding Control */ + 0x0140, /* Clock Control */ + 0x0000, /* Additional Controls */ + 0x0000, /* GPIO Control */ + 0x0002, /* Auto Increment Control */ + 0x0000, /* DAC Control */ + 0x00FF, /* DAC Volume */ + 0, + 0, + 0x0100, /* ADC Control */ + 0x00FF, /* ADC Volume */ + 0x0000, /* Notch Filter 1 Control 1 */ + 0x0000, /* Notch Filter 1 Control 2 */ + 0x0000, /* Notch Filter 2 Control 1 */ + 0x0000, /* Notch Filter 2 Control 2 */ + 0x0000, /* Notch Filter 3 Control 1 */ + 0x0000, /* Notch Filter 3 Control 2 */ + 0x0000, /* Notch Filter 4 Control 1 */ + 0x0000, /* Notch Filter 4 Control 2 */ + 0x0032, /* DAC Limit Control 1 */ + 0x0000, /* DAC Limit Control 2 */ + 0, + 0, + 0, + 0, + 0, + 0, + 0x0038, /* ALC Control 1 */ + 0x000B, /* ALC Control 2 */ + 0x0032, /* ALC Control 3 */ + 0x0000, /* Noise Gate */ + 0x0041, /* PLLN */ + 0x000C, /* PLLK1 */ + 0x0093, /* PLLK2 */ + 0x00E9, /* PLLK3 */ + 0, + 0, + 0x0030, /* ALC Control 4 */ + 0, + 0x0002, /* Input Control */ + 0x0050, /* PGA Gain */ + 0, + 0x0002, /* ADC Boost Control */ + 0, + 0x0002, /* Output Control */ + 0x0000, /* Speaker Mixer Control */ + 0, + 0, + 0, + 0x0079, /* Speaker Volume */ + 0, + 0x0000, /* Mono Mixer Control */ +}; + +static inline unsigned int wm8940_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + + if (reg >= ARRAY_SIZE(wm8940_reg_defaults)) + return -1; + + return cache[reg]; +} + +static inline int wm8940_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + + if (reg >= ARRAY_SIZE(wm8940_reg_defaults)) + return -1; + + cache[reg] = value; + + return 0; +} + +static int wm8940_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + int ret; + u8 data[3] = { reg, + (value & 0xff00) >> 8, + (value & 0x00ff) + }; + + wm8940_write_reg_cache(codec, reg, value); + + ret = codec->hw_write(codec->control_data, data, 3); + + if (ret < 0) + return ret; + else if (ret != 3) + return -EIO; + return 0; +} + +static const char *wm8940_companding[] = { "Off", "NC", "u-law", "A-law" }; +static const struct soc_enum wm8940_adc_companding_enum += SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 1, 4, wm8940_companding); +static const struct soc_enum wm8940_dac_companding_enum += SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 3, 4, wm8940_companding); + +static const char *wm8940_alc_mode_text[] = {"ALC", "Limiter"}; +static const struct soc_enum wm8940_alc_mode_enum += SOC_ENUM_SINGLE(WM8940_ALC3, 8, 2, wm8940_alc_mode_text); + +static const char *wm8940_mic_bias_level_text[] = {"0.9", "0.65"}; +static const struct soc_enum wm8940_mic_bias_level_enum += SOC_ENUM_SINGLE(WM8940_INPUTCTL, 8, 2, wm8940_mic_bias_level_text); + +static const char *wm8940_filter_mode_text[] = {"Audio", "Application"}; +static const struct soc_enum wm8940_filter_mode_enum += SOC_ENUM_SINGLE(WM8940_ADC, 7, 2, wm8940_filter_mode_text); + +static DECLARE_TLV_DB_SCALE(wm8940_spk_vol_tlv, -5700, 100, 1); +static DECLARE_TLV_DB_SCALE(wm8940_att_tlv, -1000, 1000, 0); +static DECLARE_TLV_DB_SCALE(wm8940_pga_vol_tlv, -1200, 75, 0); +static DECLARE_TLV_DB_SCALE(wm8940_alc_min_tlv, -1200, 600, 0); +static DECLARE_TLV_DB_SCALE(wm8940_alc_max_tlv, 675, 600, 0); +static DECLARE_TLV_DB_SCALE(wm8940_alc_tar_tlv, -2250, 50, 0); +static DECLARE_TLV_DB_SCALE(wm8940_lim_boost_tlv, 0, 100, 0); +static DECLARE_TLV_DB_SCALE(wm8940_lim_thresh_tlv, -600, 100, 0); +static DECLARE_TLV_DB_SCALE(wm8940_adc_tlv, -12750, 50, 1); +static DECLARE_TLV_DB_SCALE(wm8940_capture_boost_vol_tlv, 0, 2000, 0); + +static const struct snd_kcontrol_new wm8940_snd_controls[] = { + SOC_SINGLE("Digital Loopback Switch", WM8940_COMPANDINGCTL, + 6, 1, 0), + SOC_ENUM("DAC Companding", wm8940_dac_companding_enum), + SOC_ENUM("ADC Companding", wm8940_adc_companding_enum), + + SOC_ENUM("ALC Mode", wm8940_alc_mode_enum), + SOC_SINGLE("ALC Switch", WM8940_ALC1, 8, 1, 0), + SOC_SINGLE_TLV("ALC Capture Max Gain", WM8940_ALC1, + 3, 7, 1, wm8940_alc_max_tlv), + SOC_SINGLE_TLV("ALC Capture Min Gain", WM8940_ALC1, + 0, 7, 0, wm8940_alc_min_tlv), + SOC_SINGLE_TLV("ALC Capture Target", WM8940_ALC2, + 0, 14, 0, wm8940_alc_tar_tlv), + SOC_SINGLE("ALC Capture Hold", WM8940_ALC2, 4, 10, 0), + SOC_SINGLE("ALC Capture Decay", WM8940_ALC3, 4, 10, 0), + SOC_SINGLE("ALC Capture Attach", WM8940_ALC3, 0, 10, 0), + SOC_SINGLE("ALC ZC Switch", WM8940_ALC4, 1, 1, 0), + SOC_SINGLE("ALC Capture Noise Gate Switch", WM8940_NOISEGATE, + 3, 1, 0), + SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8940_NOISEGATE, + 0, 7, 0), + + SOC_SINGLE("DAC Playback Limiter Switch", WM8940_DACLIM1, 8, 1, 0), + SOC_SINGLE("DAC Playback Limiter Attack", WM8940_DACLIM1, 0, 9, 0), + SOC_SINGLE("DAC Playback Limiter Decay", WM8940_DACLIM1, 4, 11, 0), + SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8940_DACLIM2, + 4, 9, 1, wm8940_lim_thresh_tlv), + SOC_SINGLE_TLV("DAC Playback Limiter Boost", WM8940_DACLIM2, + 0, 12, 0, wm8940_lim_boost_tlv), + + SOC_SINGLE("Capture PGA ZC Switch", WM8940_PGAGAIN, 7, 1, 0), + SOC_SINGLE_TLV("Capture PGA Volume", WM8940_PGAGAIN, + 0, 63, 0, wm8940_pga_vol_tlv), + SOC_SINGLE_TLV("Digital Playback Volume", WM8940_DACVOL, + 0, 255, 0, wm8940_adc_tlv), + SOC_SINGLE_TLV("Digital Capture Volume", WM8940_ADCVOL, + 0, 255, 0, wm8940_adc_tlv), + SOC_ENUM("Mic Bias Level", wm8940_mic_bias_level_enum), + SOC_SINGLE_TLV("Capture Boost Volue", WM8940_ADCBOOST, + 8, 1, 0, wm8940_capture_boost_vol_tlv), + SOC_SINGLE_TLV("Speaker Playback Volume", WM8940_SPKVOL, + 0, 63, 0, wm8940_spk_vol_tlv), + SOC_SINGLE("Speaker Playback Switch", WM8940_SPKVOL, 6, 1, 1), + + SOC_SINGLE_TLV("Speaker Mixer Line Bypass Volume", WM8940_SPKVOL, + 8, 1, 1, wm8940_att_tlv), + SOC_SINGLE("Speaker Playback ZC Switch", WM8940_SPKVOL, 7, 1, 0), + + SOC_SINGLE("Mono Out Switch", WM8940_MONOMIX, 6, 1, 1), + SOC_SINGLE_TLV("Mono Mixer Line Bypass Volume", WM8940_MONOMIX, + 7, 1, 1, wm8940_att_tlv), + + SOC_SINGLE("High Pass Filter Switch", WM8940_ADC, 8, 1, 0), + SOC_ENUM("High Pass Filter Mode", wm8940_filter_mode_enum), + SOC_SINGLE("High Pass Filter Cut Off", WM8940_ADC, 4, 7, 0), + SOC_SINGLE("ADC Inversion Switch", WM8940_ADC, 0, 1, 0), + SOC_SINGLE("DAC Inversion Switch", WM8940_DAC, 0, 1, 0), + SOC_SINGLE("DAC Auto Mute Switch", WM8940_DAC, 2, 1, 0), + SOC_SINGLE("ZC Timeout Clock Switch", WM8940_ADDCNTRL, 0, 1, 0), +}; + +static const struct snd_kcontrol_new wm8940_speaker_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_SPKMIX, 1, 1, 0), + SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_SPKMIX, 5, 1, 0), + SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_SPKMIX, 0, 1, 0), +}; + +static const struct snd_kcontrol_new wm8940_mono_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_MONOMIX, 1, 1, 0), + SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_MONOMIX, 2, 1, 0), + SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_MONOMIX, 0, 1, 0), +}; + +static DECLARE_TLV_DB_SCALE(wm8940_boost_vol_tlv, -1500, 300, 1); +static const struct snd_kcontrol_new wm8940_input_boost_controls[] = { + SOC_DAPM_SINGLE("Mic PGA Switch", WM8940_PGAGAIN, 6, 1, 1), + SOC_DAPM_SINGLE_TLV("Aux Volume", WM8940_ADCBOOST, + 0, 7, 0, wm8940_boost_vol_tlv), + SOC_DAPM_SINGLE_TLV("Mic Volume", WM8940_ADCBOOST, + 4, 7, 0, wm8940_boost_vol_tlv), +}; + +static const struct snd_kcontrol_new wm8940_micpga_controls[] = { + SOC_DAPM_SINGLE("AUX Switch", WM8940_INPUTCTL, 2, 1, 0), + SOC_DAPM_SINGLE("MICP Switch", WM8940_INPUTCTL, 0, 1, 0), + SOC_DAPM_SINGLE("MICN Switch", WM8940_INPUTCTL, 1, 1, 0), +}; + +static const struct snd_soc_dapm_widget wm8940_dapm_widgets[] = { + SND_SOC_DAPM_MIXER("Speaker Mixer", WM8940_POWER3, 2, 0, + &wm8940_speaker_mixer_controls[0], + ARRAY_SIZE(wm8940_speaker_mixer_controls)), + SND_SOC_DAPM_MIXER("Mono Mixer", WM8940_POWER3, 3, 0, + &wm8940_mono_mixer_controls[0], + ARRAY_SIZE(wm8940_mono_mixer_controls)), + SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8940_POWER3, 0, 0), + + SND_SOC_DAPM_PGA("SpkN Out", WM8940_POWER3, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("SpkP Out", WM8940_POWER3, 6, 0, NULL, 0), + SND_SOC_DAPM_PGA("Mono Out", WM8940_POWER3, 7, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("MONOOUT"), + SND_SOC_DAPM_OUTPUT("SPKOUTP"), + SND_SOC_DAPM_OUTPUT("SPKOUTN"), + + SND_SOC_DAPM_PGA("Aux Input", WM8940_POWER1, 6, 0, NULL, 0), + SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8940_POWER2, 0, 0), + SND_SOC_DAPM_MIXER("Mic PGA", WM8940_POWER2, 2, 0, + &wm8940_micpga_controls[0], + ARRAY_SIZE(wm8940_micpga_controls)), + SND_SOC_DAPM_MIXER("Boost Mixer", WM8940_POWER2, 4, 0, + &wm8940_input_boost_controls[0], + ARRAY_SIZE(wm8940_input_boost_controls)), + SND_SOC_DAPM_MICBIAS("Mic Bias", WM8940_POWER1, 4, 0), + + SND_SOC_DAPM_INPUT("MICN"), + SND_SOC_DAPM_INPUT("MICP"), + SND_SOC_DAPM_INPUT("AUX"), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* Mono output mixer */ + {"Mono Mixer", "PCM Playback Switch", "DAC"}, + {"Mono Mixer", "Aux Playback Switch", "Aux Input"}, + {"Mono Mixer", "Line Bypass Switch", "Boost Mixer"}, + + /* Speaker output mixer */ + {"Speaker Mixer", "PCM Playback Switch", "DAC"}, + {"Speaker Mixer", "Aux Playback Switch", "Aux Input"}, + {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"}, + + /* Outputs */ + {"Mono Out", NULL, "Mono Mixer"}, + {"MONOOUT", NULL, "Mono Out"}, + {"SpkN Out", NULL, "Speaker Mixer"}, + {"SpkP Out", NULL, "Speaker Mixer"}, + {"SPKOUTN", NULL, "SpkN Out"}, + {"SPKOUTP", NULL, "SpkP Out"}, + + /* Microphone PGA */ + {"Mic PGA", "MICN Switch", "MICN"}, + {"Mic PGA", "MICP Switch", "MICP"}, + {"Mic PGA", "AUX Switch", "AUX"}, + + /* Boost Mixer */ + {"Boost Mixer", "Mic PGA Switch", "Mic PGA"}, + {"Boost Mixer", "Mic Volume", "MICP"}, + {"Boost Mixer", "Aux Volume", "Aux Input"}, + + {"ADC", NULL, "Boost Mixer"}, +}; + +static int wm8940_add_widgets(struct snd_soc_codec *codec) +{ + int ret; + + ret = snd_soc_dapm_new_controls(codec, wm8940_dapm_widgets, + ARRAY_SIZE(wm8940_dapm_widgets)); + if (ret) + goto error_ret; + ret = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + if (ret) + goto error_ret; + ret = snd_soc_dapm_new_widgets(codec); + +error_ret: + return ret; +} + +#define wm8940_reset(c) wm8940_write(c, WM8940_SOFTRESET, 0); + +static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFE67; + u16 clk = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0x1fe; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + clk |= 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + wm8940_write(codec, WM8940_CLOCK, clk); + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= (2 << 3); + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= (1 << 3); + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= (3 << 3); + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= (3 << 3) | (1 << 7); + break; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= (1 << 7); + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= (1 << 8); + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= (1 << 8) | (1 << 7); + break; + } + + wm8940_write(codec, WM8940_IFACE, iface); + + return 0; +} + +static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFD9F; + u16 addcntrl = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFF1; + u16 companding = wm8940_read_reg_cache(codec, + WM8940_COMPANDINGCTL) & 0xFFDF; + int ret; + + /* LoutR control */ + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE + && params_channels(params) == 2) + iface |= (1 << 9); + + switch (params_rate(params)) { + case SNDRV_PCM_RATE_8000: + addcntrl |= (0x5 << 1); + break; + case SNDRV_PCM_RATE_11025: + addcntrl |= (0x4 << 1); + break; + case SNDRV_PCM_RATE_16000: + addcntrl |= (0x3 << 1); + break; + case SNDRV_PCM_RATE_22050: + addcntrl |= (0x2 << 1); + break; + case SNDRV_PCM_RATE_32000: + addcntrl |= (0x1 << 1); + break; + case SNDRV_PCM_RATE_44100: + case SNDRV_PCM_RATE_48000: + break; + } + ret = wm8940_write(codec, WM8940_ADDCNTRL, addcntrl); + if (ret) + goto error_ret; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + companding = companding | (1 << 5); + break; + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= (1 << 5); + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= (2 << 5); + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= (3 << 5); + break; + } + ret = wm8940_write(codec, WM8940_COMPANDINGCTL, companding); + if (ret) + goto error_ret; + ret = wm8940_write(codec, WM8940_IFACE, iface); + +error_ret: + return ret; +} + +static int wm8940_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 mute_reg = wm8940_read_reg_cache(codec, WM8940_DAC) & 0xffbf; + + if (mute) + mute_reg |= 0x40; + + return wm8940_write(codec, WM8940_DAC, mute_reg); +} + +static int wm8940_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 val; + u16 pwr_reg = wm8940_read_reg_cache(codec, WM8940_POWER1) & 0x1F0; + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_ON: + /* ensure bufioen and biasen */ + pwr_reg |= (1 << 2) | (1 << 3); + /* Enable thermal shutdown */ + val = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL); + ret = wm8940_write(codec, WM8940_OUTPUTCTL, val | 0x2); + if (ret) + break; + /* set vmid to 75k */ + ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1); + break; + case SND_SOC_BIAS_PREPARE: + /* ensure bufioen and biasen */ + pwr_reg |= (1 << 2) | (1 << 3); + ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1); + break; + case SND_SOC_BIAS_STANDBY: + /* ensure bufioen and biasen */ + pwr_reg |= (1 << 2) | (1 << 3); + /* set vmid to 300k for standby */ + ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x2); + break; + case SND_SOC_BIAS_OFF: + ret = wm8940_write(codec, WM8940_POWER1, pwr_reg); + break; + } + + return ret; +} + +struct pll_ { + unsigned int pre_scale:2; + unsigned int n:4; + unsigned int k; +}; + +static struct pll_ pll_div; + +/* The size in bits of the pll divide multiplied by 10 + * to allow rounding later */ +#define FIXED_PLL_SIZE ((1 << 24) * 10) +static void pll_factors(unsigned int target, unsigned int source) +{ + unsigned long long Kpart; + unsigned int K, Ndiv, Nmod; + /* The left shift ist to avoid accuracy loss when right shifting */ + Ndiv = target / source; + + if (Ndiv > 12) { + source <<= 1; + /* Multiply by 2 */ + pll_div.pre_scale = 0; + Ndiv = target / source; + } else if (Ndiv < 3) { + source >>= 2; + /* Divide by 4 */ + pll_div.pre_scale = 3; + Ndiv = target / source; + } else if (Ndiv < 6) { + source >>= 1; + /* divide by 2 */ + pll_div.pre_scale = 2; + Ndiv = target / source; + } else + pll_div.pre_scale = 1; + + if ((Ndiv < 6) || (Ndiv > 12)) + printk(KERN_WARNING + "WM8940 N value %d outwith recommended range!d\n", + Ndiv); + + pll_div.n = Ndiv; + Nmod = target % source; + Kpart = FIXED_PLL_SIZE * (long long)Nmod; + + do_div(Kpart, source); + + K = Kpart & 0xFFFFFFFF; + + /* Check if we need to round */ + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + K /= 10; + + pll_div.k = K; +} + +/* Untested at the moment */ +static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + /* Turn off PLL */ + reg = wm8940_read_reg_cache(codec, WM8940_POWER1); + wm8940_write(codec, WM8940_POWER1, reg & 0x1df); + + if (freq_in == 0 || freq_out == 0) { + /* Clock CODEC directly from MCLK */ + reg = wm8940_read_reg_cache(codec, WM8940_CLOCK); + wm8940_write(codec, WM8940_CLOCK, reg & 0x0ff); + /* Pll power down */ + wm8940_write(codec, WM8940_PLLN, (1 << 7)); + return 0; + } + + /* Pll is followed by a frequency divide by 4 */ + pll_factors(freq_out*4, freq_in); + if (pll_div.k) + wm8940_write(codec, WM8940_PLLN, + (pll_div.pre_scale << 4) | pll_div.n | (1 << 6)); + else /* No factional component */ + wm8940_write(codec, WM8940_PLLN, + (pll_div.pre_scale << 4) | pll_div.n); + wm8940_write(codec, WM8940_PLLK1, pll_div.k >> 18); + wm8940_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff); + wm8940_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff); + /* Enable the PLL */ + reg = wm8940_read_reg_cache(codec, WM8940_POWER1); + wm8940_write(codec, WM8940_POWER1, reg | 0x020); + + /* Run CODEC from PLL instead of MCLK */ + reg = wm8940_read_reg_cache(codec, WM8940_CLOCK); + wm8940_write(codec, WM8940_CLOCK, reg | 0x100); + + return 0; +} + +static int wm8940_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8940_priv *wm8940 = codec->private_data; + + switch (freq) { + case 11289600: + case 12000000: + case 12288000: + case 16934400: + case 18432000: + wm8940->sysclk = freq; + return 0; + } + return -EINVAL; +} + +static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai, + int div_id, int div) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + int ret = 0; + + switch (div_id) { + case WM8940_BCLKDIV: + reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFFEF3; + ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 2)); + break; + case WM8940_MCLKDIV: + reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFF1F; + ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 5)); + break; + case WM8940_OPCLKDIV: + reg = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFCF; + ret = wm8940_write(codec, WM8940_ADDCNTRL, reg | (div << 4)); + break; + } + return ret; +} + +#define WM8940_RATES SNDRV_PCM_RATE_8000_48000 + +#define WM8940_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8940_dai_ops = { + .hw_params = wm8940_i2s_hw_params, + .set_sysclk = wm8940_set_dai_sysclk, + .digital_mute = wm8940_mute, + .set_fmt = wm8940_set_dai_fmt, + .set_clkdiv = wm8940_set_dai_clkdiv, + .set_pll = wm8940_set_dai_pll, +}; + +struct snd_soc_dai wm8940_dai = { + .name = "WM8940", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8940_RATES, + .formats = WM8940_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8940_RATES, + .formats = WM8940_FORMATS, + }, + .ops = &wm8940_dai_ops, + .symmetric_rates = 1, +}; +EXPORT_SYMBOL_GPL(wm8940_dai); + +static int wm8940_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + return wm8940_set_bias_level(codec, SND_SOC_BIAS_OFF); +} + +static int wm8940_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + int i; + int ret; + u8 data[3]; + u16 *cache = codec->reg_cache; + + /* Sync reg_cache with the hardware + * Could use auto incremented writes to speed this up + */ + for (i = 0; i < ARRAY_SIZE(wm8940_reg_defaults); i++) { + data[0] = i; + data[1] = (cache[i] & 0xFF00) >> 8; + data[2] = cache[i] & 0x00FF; + ret = codec->hw_write(codec->control_data, data, 3); + if (ret < 0) + goto error_ret; + else if (ret != 3) { + ret = -EIO; + goto error_ret; + } + } + ret = wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + if (ret) + goto error_ret; + ret = wm8940_set_bias_level(codec, codec->suspend_bias_level); + +error_ret: + return ret; +} + +static struct snd_soc_codec *wm8940_codec; + +static int wm8940_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + + int ret = 0; + + if (wm8940_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = wm8940_codec; + codec = wm8940_codec; + + mutex_init(&codec->mutex); + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + ret = snd_soc_add_controls(codec, wm8940_snd_controls, + ARRAY_SIZE(wm8940_snd_controls)); + if (ret) + goto error_free_pcms; + ret = wm8940_add_widgets(codec); + if (ret) + goto error_free_pcms; + + ret = snd_soc_init_card(socdev); + if (ret < 0) { + dev_err(codec->dev, "failed to register card: %d\n", ret); + goto error_free_pcms; + } + + return ret; + +error_free_pcms: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + return ret; +} + +static int wm8940_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8940 = { + .probe = wm8940_probe, + .remove = wm8940_remove, + .suspend = wm8940_suspend, + .resume = wm8940_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8940); + +static int wm8940_register(struct wm8940_priv *wm8940) +{ + struct wm8940_setup_data *pdata = wm8940->codec.dev->platform_data; + struct snd_soc_codec *codec = &wm8940->codec; + int ret; + u16 reg; + if (wm8940_codec) { + dev_err(codec->dev, "Another WM8940 is registered\n"); + return -EINVAL; + } + + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->private_data = wm8940; + codec->name = "WM8940"; + codec->owner = THIS_MODULE; + codec->read = wm8940_read_reg_cache; + codec->write = wm8940_write; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = wm8940_set_bias_level; + codec->dai = &wm8940_dai; + codec->num_dai = 1; + codec->reg_cache_size = ARRAY_SIZE(wm8940_reg_defaults); + codec->reg_cache = &wm8940->reg_cache; + + memcpy(codec->reg_cache, wm8940_reg_defaults, + sizeof(wm8940_reg_defaults)); + + ret = wm8940_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + return ret; + } + + wm8940_dai.dev = codec->dev; + + wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + ret = wm8940_write(codec, WM8940_POWER1, 0x180); + if (ret < 0) + return ret; + + if (!pdata) + dev_warn(codec->dev, "No platform data supplied\n"); + else { + reg = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL); + ret = wm8940_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi); + if (ret < 0) + return ret; + } + + + wm8940_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm8940_dai); + if (ret) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + return 0; +} + +static void wm8940_unregister(struct wm8940_priv *wm8940) +{ + wm8940_set_bias_level(&wm8940->codec, SND_SOC_BIAS_OFF); + snd_soc_unregister_dai(&wm8940_dai); + snd_soc_unregister_codec(&wm8940->codec); + kfree(wm8940); + wm8940_codec = NULL; +} + +static int wm8940_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8940_priv *wm8940; + struct snd_soc_codec *codec; + + wm8940 = kzalloc(sizeof *wm8940, GFP_KERNEL); + if (wm8940 == NULL) + return -ENOMEM; + + codec = &wm8940->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + i2c_set_clientdata(i2c, wm8940); + codec->control_data = i2c; + codec->dev = &i2c->dev; + + return wm8940_register(wm8940); +} + +static int __devexit wm8940_i2c_remove(struct i2c_client *client) +{ + struct wm8940_priv *wm8940 = i2c_get_clientdata(client); + + wm8940_unregister(wm8940); + + return 0; +} + +static const struct i2c_device_id wm8940_i2c_id[] = { + { "wm8940", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8940_i2c_id); + +static struct i2c_driver wm8940_i2c_driver = { + .driver = { + .name = "WM8940 I2C Codec", + .owner = THIS_MODULE, + }, + .probe = wm8940_i2c_probe, + .remove = __devexit_p(wm8940_i2c_remove), + .id_table = wm8940_i2c_id, +}; + +static int __init wm8940_modinit(void) +{ + int ret; + + ret = i2c_add_driver(&wm8940_i2c_driver); + if (ret) + printk(KERN_ERR "Failed to register WM8940 I2C driver: %d\n", + ret); + return ret; +} +module_init(wm8940_modinit); + +static void __exit wm8940_exit(void) +{ + i2c_del_driver(&wm8940_i2c_driver); +} +module_exit(wm8940_exit); + +MODULE_DESCRIPTION("ASoC WM8940 driver"); +MODULE_AUTHOR("Jonathan Cameron"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8940.h b/sound/soc/codecs/wm8940.h new file mode 100644 index 0000000..8410eed --- /dev/null +++ b/sound/soc/codecs/wm8940.h @@ -0,0 +1,104 @@ +/* + * wm8940.h -- WM8940 Soc Audio driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8940_H +#define _WM8940_H + +struct wm8940_setup_data { + /* Vref to analogue output resistance */ +#define WM8940_VROI_1K 0 +#define WM8940_VROI_30K 1 + unsigned int vroi:1; +}; +extern struct snd_soc_dai wm8940_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8940; + +/* WM8940 register space */ +#define WM8940_SOFTRESET 0x00 +#define WM8940_POWER1 0x01 +#define WM8940_POWER2 0x02 +#define WM8940_POWER3 0x03 +#define WM8940_IFACE 0x04 +#define WM8940_COMPANDINGCTL 0x05 +#define WM8940_CLOCK 0x06 +#define WM8940_ADDCNTRL 0x07 +#define WM8940_GPIO 0x08 +#define WM8940_CTLINT 0x09 +#define WM8940_DAC 0x0A +#define WM8940_DACVOL 0x0B + +#define WM8940_ADC 0x0E +#define WM8940_ADCVOL 0x0F +#define WM8940_NOTCH1 0x10 +#define WM8940_NOTCH2 0x11 +#define WM8940_NOTCH3 0x12 +#define WM8940_NOTCH4 0x13 +#define WM8940_NOTCH5 0x14 +#define WM8940_NOTCH6 0x15 +#define WM8940_NOTCH7 0x16 +#define WM8940_NOTCH8 0x17 +#define WM8940_DACLIM1 0x18 +#define WM8940_DACLIM2 0x19 + +#define WM8940_ALC1 0x20 +#define WM8940_ALC2 0x21 +#define WM8940_ALC3 0x22 +#define WM8940_NOISEGATE 0x23 +#define WM8940_PLLN 0x24 +#define WM8940_PLLK1 0x25 +#define WM8940_PLLK2 0x26 +#define WM8940_PLLK3 0x27 + +#define WM8940_ALC4 0x2A + +#define WM8940_INPUTCTL 0x2C +#define WM8940_PGAGAIN 0x2D + +#define WM8940_ADCBOOST 0x2F + +#define WM8940_OUTPUTCTL 0x31 +#define WM8940_SPKMIX 0x32 + +#define WM8940_SPKVOL 0x36 + +#define WM8940_MONOMIX 0x38 + +#define WM8940_CACHEREGNUM 0x57 + + +/* Clock divider Id's */ +#define WM8940_BCLKDIV 0 +#define WM8940_MCLKDIV 1 +#define WM8940_OPCLKDIV 2 + +/* MCLK clock dividers */ +#define WM8940_MCLKDIV_1 0 +#define WM8940_MCLKDIV_1_5 1 +#define WM8940_MCLKDIV_2 2 +#define WM8940_MCLKDIV_3 3 +#define WM8940_MCLKDIV_4 4 +#define WM8940_MCLKDIV_6 5 +#define WM8940_MCLKDIV_8 6 +#define WM8940_MCLKDIV_12 7 + +/* BCLK clock dividers */ +#define WM8940_BCLKDIV_1 0 +#define WM8940_BCLKDIV_2 1 +#define WM8940_BCLKDIV_4 2 +#define WM8940_BCLKDIV_8 3 +#define WM8940_BCLKDIV_16 4 +#define WM8940_BCLKDIV_32 5 + +/* PLL Out Dividers */ +#define WM8940_OPCLKDIV_1 0 +#define WM8940_OPCLKDIV_2 1 +#define WM8940_OPCLKDIV_3 2 +#define WM8940_OPCLKDIV_4 3 + +#endif /* _WM8940_H */ + diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c new file mode 100644 index 0000000..e224d8a --- /dev/null +++ b/sound/soc/codecs/wm8960.c @@ -0,0 +1,969 @@ +/* + * wm8960.c -- WM8960 ALSA SoC Audio driver + * + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "wm8960.h" + +#define AUDIO_NAME "wm8960" + +struct snd_soc_codec_device soc_codec_dev_wm8960; + +/* R25 - Power 1 */ +#define WM8960_VREF 0x40 + +/* R28 - Anti-pop 1 */ +#define WM8960_POBCTRL 0x80 +#define WM8960_BUFDCOPEN 0x10 +#define WM8960_BUFIOEN 0x08 +#define WM8960_SOFT_ST 0x04 +#define WM8960_HPSTBY 0x01 + +/* R29 - Anti-pop 2 */ +#define WM8960_DISOP 0x40 + +/* + * wm8960 register cache + * We can't read the WM8960 register space when we are + * using 2 wire for device control, so we cache them instead. + */ +static const u16 wm8960_reg[WM8960_CACHEREGNUM] = { + 0x0097, 0x0097, 0x0000, 0x0000, + 0x0000, 0x0008, 0x0000, 0x000a, + 0x01c0, 0x0000, 0x00ff, 0x00ff, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x007b, 0x0100, 0x0032, + 0x0000, 0x00c3, 0x00c3, 0x01c0, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0100, 0x0100, 0x0050, 0x0050, + 0x0050, 0x0050, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0040, 0x0000, + 0x0000, 0x0050, 0x0050, 0x0000, + 0x0002, 0x0037, 0x004d, 0x0080, + 0x0008, 0x0031, 0x0026, 0x00e9, +}; + +struct wm8960_priv { + u16 reg_cache[WM8960_CACHEREGNUM]; + struct snd_soc_codec codec; +}; + +/* + * read wm8960 register cache + */ +static inline unsigned int wm8960_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg == WM8960_RESET) + return 0; + if (reg >= WM8960_CACHEREGNUM) + return -1; + return cache[reg]; +} + +/* + * write wm8960 register cache + */ +static inline void wm8960_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + if (reg >= WM8960_CACHEREGNUM) + return; + cache[reg] = value; +} + +static inline unsigned int wm8960_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + return wm8960_read_reg_cache(codec, reg); +} + +/* + * write to the WM8960 register space + */ +static int wm8960_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + /* data is + * D15..D9 WM8960 register offset + * D8...D0 register data + */ + data[0] = (reg << 1) | ((value >> 8) & 0x0001); + data[1] = value & 0x00ff; + + wm8960_write_reg_cache(codec, reg, value); + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +#define wm8960_reset(c) wm8960_write(c, WM8960_RESET, 0) + +/* enumerated controls */ +static const char *wm8960_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"}; +static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted", + "Right Inverted", "Stereo Inversion"}; +static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"}; +static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"}; +static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"}; +static const char *wm8960_alcmode[] = {"ALC", "Limiter"}; + +static const struct soc_enum wm8960_enum[] = { + SOC_ENUM_SINGLE(WM8960_DACCTL1, 1, 4, wm8960_deemph), + SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity), + SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity), + SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff), + SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff), + SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc), + SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode), +}; + +static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0); +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1); +static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0); +static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); + +static const struct snd_kcontrol_new wm8960_snd_controls[] = { +SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL, + 0, 63, 0, adc_tlv), +SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL, + 6, 1, 0), +SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL, + 7, 1, 0), + +SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC, + 0, 255, 0, dac_tlv), + +SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1, + 0, 127, 0, out_tlv), +SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1, + 7, 1, 0), + +SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2, + 0, 127, 0, out_tlv), +SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2, + 7, 1, 0), +SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0), +SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0), + +SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0), +SOC_ENUM("ADC Polarity", wm8960_enum[1]), +SOC_ENUM("Playback De-emphasis", wm8960_enum[0]), +SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0), + +SOC_ENUM("DAC Polarity", wm8960_enum[2]), + +SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[3]), +SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[4]), +SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0), +SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0), + +SOC_ENUM("ALC Function", wm8960_enum[5]), +SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0), +SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1), +SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0), +SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0), +SOC_ENUM("ALC Mode", wm8960_enum[6]), +SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0), +SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0), + +SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0), +SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0), + +SOC_DOUBLE_R("ADC PCM Capture Volume", WM8960_LINPATH, WM8960_RINPATH, + 0, 127, 0), + +SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume", + WM8960_BYPASS1, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume", + WM8960_LOUTMIX, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume", + WM8960_BYPASS2, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume", + WM8960_ROUTMIX, 4, 7, 1, bypass_tlv), +}; + +static const struct snd_kcontrol_new wm8960_lin_boost[] = { +SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0), +SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0), +SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_lin[] = { +SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_rin_boost[] = { +SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0), +SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0), +SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_rin[] = { +SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_loutput_mixer[] = { +SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0), +SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0), +SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_routput_mixer[] = { +SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0), +SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0), +SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_mono_out[] = { +SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0), +SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0), +}; + +static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("LINPUT1"), +SND_SOC_DAPM_INPUT("RINPUT1"), +SND_SOC_DAPM_INPUT("LINPUT2"), +SND_SOC_DAPM_INPUT("RINPUT2"), +SND_SOC_DAPM_INPUT("LINPUT3"), +SND_SOC_DAPM_INPUT("RINPUT3"), + +SND_SOC_DAPM_MICBIAS("MICB", WM8960_POWER1, 1, 0), + +SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0, + wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)), +SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0, + wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)), + +SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0, + wm8960_lin, ARRAY_SIZE(wm8960_lin)), +SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0, + wm8960_rin, ARRAY_SIZE(wm8960_rin)), + +SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER2, 3, 0), +SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER2, 2, 0), + +SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0), +SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0), + +SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0, + &wm8960_loutput_mixer[0], + ARRAY_SIZE(wm8960_loutput_mixer)), +SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0, + &wm8960_routput_mixer[0], + ARRAY_SIZE(wm8960_routput_mixer)), + +SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0, + &wm8960_mono_out[0], + ARRAY_SIZE(wm8960_mono_out)), + +SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0), + +SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0), + +SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0), +SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0), + +SND_SOC_DAPM_OUTPUT("SPK_LP"), +SND_SOC_DAPM_OUTPUT("SPK_LN"), +SND_SOC_DAPM_OUTPUT("HP_L"), +SND_SOC_DAPM_OUTPUT("HP_R"), +SND_SOC_DAPM_OUTPUT("SPK_RP"), +SND_SOC_DAPM_OUTPUT("SPK_RN"), +SND_SOC_DAPM_OUTPUT("OUT3"), +}; + +static const struct snd_soc_dapm_route audio_paths[] = { + { "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" }, + { "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" }, + { "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" }, + + { "Left Input Mixer", "Boost Switch", "Left Boost Mixer", }, + { "Left Input Mixer", NULL, "LINPUT1", }, /* Really Boost Switch */ + { "Left Input Mixer", NULL, "LINPUT2" }, + { "Left Input Mixer", NULL, "LINPUT3" }, + + { "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" }, + { "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" }, + { "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" }, + + { "Right Input Mixer", "Boost Switch", "Right Boost Mixer", }, + { "Right Input Mixer", NULL, "RINPUT1", }, /* Really Boost Switch */ + { "Right Input Mixer", NULL, "RINPUT2" }, + { "Right Input Mixer", NULL, "LINPUT3" }, + + { "Left ADC", NULL, "Left Input Mixer" }, + { "Right ADC", NULL, "Right Input Mixer" }, + + { "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" }, + { "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer"} , + { "Left Output Mixer", "PCM Playback Switch", "Left DAC" }, + + { "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" }, + { "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" } , + { "Right Output Mixer", "PCM Playback Switch", "Right DAC" }, + + { "Mono Output Mixer", "Left Switch", "Left Output Mixer" }, + { "Mono Output Mixer", "Right Switch", "Right Output Mixer" }, + + { "LOUT1 PGA", NULL, "Left Output Mixer" }, + { "ROUT1 PGA", NULL, "Right Output Mixer" }, + + { "HP_L", NULL, "LOUT1 PGA" }, + { "HP_R", NULL, "ROUT1 PGA" }, + + { "Left Speaker PGA", NULL, "Left Output Mixer" }, + { "Right Speaker PGA", NULL, "Right Output Mixer" }, + + { "Left Speaker Output", NULL, "Left Speaker PGA" }, + { "Right Speaker Output", NULL, "Right Speaker PGA" }, + + { "SPK_LN", NULL, "Left Speaker Output" }, + { "SPK_LP", NULL, "Left Speaker Output" }, + { "SPK_RN", NULL, "Right Speaker Output" }, + { "SPK_RP", NULL, "Right Speaker Output" }, + + { "OUT3", NULL, "Mono Output Mixer", } +}; + +static int wm8960_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8960_dapm_widgets, + ARRAY_SIZE(wm8960_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface |= 0x0040; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0002; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0001; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= 0x0013; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0090; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0080; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0010; + break; + default: + return -EINVAL; + } + + /* set iface */ + wm8960_write(codec, WM8960_IFACE1, iface); + return 0; +} + +static int wm8960_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + u16 iface = wm8960_read(codec, WM8960_IFACE1) & 0xfff3; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0004; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0008; + break; + } + + /* set iface */ + wm8960_write(codec, WM8960_IFACE1, iface); + return 0; +} + +static int wm8960_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 mute_reg = wm8960_read(codec, WM8960_DACCTL1) & 0xfff7; + + if (mute) + wm8960_write(codec, WM8960_DACCTL1, mute_reg | 0x8); + else + wm8960_write(codec, WM8960_DACCTL1, mute_reg); + return 0; +} + +static int wm8960_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm8960_data *pdata = codec->dev->platform_data; + u16 reg; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + /* Set VMID to 2x50k */ + reg = wm8960_read(codec, WM8960_POWER1); + reg &= ~0x180; + reg |= 0x80; + wm8960_write(codec, WM8960_POWER1, reg); + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Enable anti-pop features */ + wm8960_write(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN | WM8960_BUFIOEN); + + /* Discharge HP output */ + reg = WM8960_DISOP; + if (pdata) + reg |= pdata->dres << 4; + wm8960_write(codec, WM8960_APOP2, reg); + + msleep(400); + + wm8960_write(codec, WM8960_APOP2, 0); + + /* Enable & ramp VMID at 2x50k */ + reg = wm8960_read(codec, WM8960_POWER1); + reg |= 0x80; + wm8960_write(codec, WM8960_POWER1, reg); + msleep(100); + + /* Enable VREF */ + wm8960_write(codec, WM8960_POWER1, reg | WM8960_VREF); + + /* Disable anti-pop features */ + wm8960_write(codec, WM8960_APOP1, WM8960_BUFIOEN); + } + + /* Set VMID to 2x250k */ + reg = wm8960_read(codec, WM8960_POWER1); + reg &= ~0x180; + reg |= 0x100; + wm8960_write(codec, WM8960_POWER1, reg); + break; + + case SND_SOC_BIAS_OFF: + /* Enable anti-pop features */ + wm8960_write(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN | WM8960_BUFIOEN); + + /* Disable VMID and VREF, let them discharge */ + wm8960_write(codec, WM8960_POWER1, 0); + msleep(600); + + wm8960_write(codec, WM8960_APOP1, 0); + break; + } + + codec->bias_level = level; + + return 0; +} + +/* PLL divisors */ +struct _pll_div { + u32 pre_div:1; + u32 n:4; + u32 k:24; +}; + +/* The size in bits of the pll divide multiplied by 10 + * to allow rounding later */ +#define FIXED_PLL_SIZE ((1 << 24) * 10) + +static int pll_factors(unsigned int source, unsigned int target, + struct _pll_div *pll_div) +{ + unsigned long long Kpart; + unsigned int K, Ndiv, Nmod; + + pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target); + + /* Scale up target to PLL operating frequency */ + target *= 4; + + Ndiv = target / source; + if (Ndiv < 6) { + source >>= 1; + pll_div->pre_div = 1; + Ndiv = target / source; + } else + pll_div->pre_div = 0; + + if ((Ndiv < 6) || (Ndiv > 12)) { + pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv); + return -EINVAL; + } + + pll_div->n = Ndiv; + Nmod = target % source; + Kpart = FIXED_PLL_SIZE * (long long)Nmod; + + do_div(Kpart, source); + + K = Kpart & 0xFFFFFFFF; + + /* Check if we need to round */ + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + K /= 10; + + pll_div->k = K; + + pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n", + pll_div->n, pll_div->k, pll_div->pre_div); + + return 0; +} + +static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + static struct _pll_div pll_div; + int ret; + + if (freq_in && freq_out) { + ret = pll_factors(freq_in, freq_out, &pll_div); + if (ret != 0) + return ret; + } + + /* Disable the PLL: even if we are changing the frequency the + * PLL needs to be disabled while we do so. */ + wm8960_write(codec, WM8960_CLOCK1, + wm8960_read(codec, WM8960_CLOCK1) & ~1); + wm8960_write(codec, WM8960_POWER2, + wm8960_read(codec, WM8960_POWER2) & ~1); + + if (!freq_in || !freq_out) + return 0; + + reg = wm8960_read(codec, WM8960_PLL1) & ~0x3f; + reg |= pll_div.pre_div << 4; + reg |= pll_div.n; + + if (pll_div.k) { + reg |= 0x20; + + wm8960_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f); + wm8960_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff); + wm8960_write(codec, WM8960_PLL4, pll_div.k & 0x1ff); + } + wm8960_write(codec, WM8960_PLL1, reg); + + /* Turn it on */ + wm8960_write(codec, WM8960_POWER2, + wm8960_read(codec, WM8960_POWER2) | 1); + msleep(250); + wm8960_write(codec, WM8960_CLOCK1, + wm8960_read(codec, WM8960_CLOCK1) | 1); + + return 0; +} + +static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, + int div_id, int div) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + switch (div_id) { + case WM8960_SYSCLKSEL: + reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1fe; + wm8960_write(codec, WM8960_CLOCK1, reg | div); + break; + case WM8960_SYSCLKDIV: + reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1f9; + wm8960_write(codec, WM8960_CLOCK1, reg | div); + break; + case WM8960_DACDIV: + reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1c7; + wm8960_write(codec, WM8960_CLOCK1, reg | div); + break; + case WM8960_OPCLKDIV: + reg = wm8960_read(codec, WM8960_PLL1) & 0x03f; + wm8960_write(codec, WM8960_PLL1, reg | div); + break; + case WM8960_DCLKDIV: + reg = wm8960_read(codec, WM8960_CLOCK2) & 0x03f; + wm8960_write(codec, WM8960_CLOCK2, reg | div); + break; + case WM8960_TOCLKSEL: + reg = wm8960_read(codec, WM8960_ADDCTL1) & 0x1fd; + wm8960_write(codec, WM8960_ADDCTL1, reg | div); + break; + default: + return -EINVAL; + } + + return 0; +} + +#define WM8960_RATES SNDRV_PCM_RATE_8000_48000 + +#define WM8960_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_ops wm8960_dai_ops = { + .hw_params = wm8960_hw_params, + .digital_mute = wm8960_mute, + .set_fmt = wm8960_set_dai_fmt, + .set_clkdiv = wm8960_set_dai_clkdiv, + .set_pll = wm8960_set_dai_pll, +}; + +struct snd_soc_dai wm8960_dai = { + .name = "WM8960", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8960_RATES, + .formats = WM8960_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8960_RATES, + .formats = WM8960_FORMATS,}, + .ops = &wm8960_dai_ops, + .symmetric_rates = 1, +}; +EXPORT_SYMBOL_GPL(wm8960_dai); + +static int wm8960_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + wm8960_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8960_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + int i; + u8 data[2]; + u16 *cache = codec->reg_cache; + + /* Sync reg_cache with the hardware */ + for (i = 0; i < ARRAY_SIZE(wm8960_reg); i++) { + data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001); + data[1] = cache[i] & 0x00ff; + codec->hw_write(codec->control_data, data, 2); + } + + wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + wm8960_set_bias_level(codec, codec->suspend_bias_level); + return 0; +} + +static struct snd_soc_codec *wm8960_codec; + +static int wm8960_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + if (wm8960_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = wm8960_codec; + codec = wm8960_codec; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + snd_soc_add_controls(codec, wm8960_snd_controls, + ARRAY_SIZE(wm8960_snd_controls)); + wm8960_add_widgets(codec); + ret = snd_soc_init_card(socdev); + if (ret < 0) { + dev_err(codec->dev, "failed to register card: %d\n", ret); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + return ret; +} + +/* power down chip */ +static int wm8960_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8960 = { + .probe = wm8960_probe, + .remove = wm8960_remove, + .suspend = wm8960_suspend, + .resume = wm8960_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8960); + +static int wm8960_register(struct wm8960_priv *wm8960) +{ + struct wm8960_data *pdata = wm8960->codec.dev->platform_data; + struct snd_soc_codec *codec = &wm8960->codec; + int ret; + u16 reg; + + if (wm8960_codec) { + dev_err(codec->dev, "Another WM8960 is registered\n"); + return -EINVAL; + } + + if (!pdata) { + dev_warn(codec->dev, "No platform data supplied\n"); + } else { + if (pdata->dres > WM8960_DRES_MAX) { + dev_err(codec->dev, "Invalid DRES: %d\n", pdata->dres); + pdata->dres = 0; + } + } + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->private_data = wm8960; + codec->name = "WM8960"; + codec->owner = THIS_MODULE; + codec->read = wm8960_read_reg_cache; + codec->write = wm8960_write; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = wm8960_set_bias_level; + codec->dai = &wm8960_dai; + codec->num_dai = 1; + codec->reg_cache_size = WM8960_CACHEREGNUM; + codec->reg_cache = &wm8960->reg_cache; + + memcpy(codec->reg_cache, wm8960_reg, sizeof(wm8960_reg)); + + ret = wm8960_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + return ret; + } + + wm8960_dai.dev = codec->dev; + + wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Latch the update bits */ + reg = wm8960_read(codec, WM8960_LINVOL); + wm8960_write(codec, WM8960_LINVOL, reg | 0x100); + reg = wm8960_read(codec, WM8960_RINVOL); + wm8960_write(codec, WM8960_RINVOL, reg | 0x100); + reg = wm8960_read(codec, WM8960_LADC); + wm8960_write(codec, WM8960_LADC, reg | 0x100); + reg = wm8960_read(codec, WM8960_RADC); + wm8960_write(codec, WM8960_RADC, reg | 0x100); + reg = wm8960_read(codec, WM8960_LDAC); + wm8960_write(codec, WM8960_LDAC, reg | 0x100); + reg = wm8960_read(codec, WM8960_RDAC); + wm8960_write(codec, WM8960_RDAC, reg | 0x100); + reg = wm8960_read(codec, WM8960_LOUT1); + wm8960_write(codec, WM8960_LOUT1, reg | 0x100); + reg = wm8960_read(codec, WM8960_ROUT1); + wm8960_write(codec, WM8960_ROUT1, reg | 0x100); + reg = wm8960_read(codec, WM8960_LOUT2); + wm8960_write(codec, WM8960_LOUT2, reg | 0x100); + reg = wm8960_read(codec, WM8960_ROUT2); + wm8960_write(codec, WM8960_ROUT2, reg | 0x100); + + wm8960_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm8960_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + return 0; +} + +static void wm8960_unregister(struct wm8960_priv *wm8960) +{ + wm8960_set_bias_level(&wm8960->codec, SND_SOC_BIAS_OFF); + snd_soc_unregister_dai(&wm8960_dai); + snd_soc_unregister_codec(&wm8960->codec); + kfree(wm8960); + wm8960_codec = NULL; +} + +static __devinit int wm8960_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8960_priv *wm8960; + struct snd_soc_codec *codec; + + wm8960 = kzalloc(sizeof(struct wm8960_priv), GFP_KERNEL); + if (wm8960 == NULL) + return -ENOMEM; + + codec = &wm8960->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + + i2c_set_clientdata(i2c, wm8960); + codec->control_data = i2c; + + codec->dev = &i2c->dev; + + return wm8960_register(wm8960); +} + +static __devexit int wm8960_i2c_remove(struct i2c_client *client) +{ + struct wm8960_priv *wm8960 = i2c_get_clientdata(client); + wm8960_unregister(wm8960); + return 0; +} + +static const struct i2c_device_id wm8960_i2c_id[] = { + { "wm8960", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id); + +static struct i2c_driver wm8960_i2c_driver = { + .driver = { + .name = "WM8960 I2C Codec", + .owner = THIS_MODULE, + }, + .probe = wm8960_i2c_probe, + .remove = __devexit_p(wm8960_i2c_remove), + .id_table = wm8960_i2c_id, +}; + +static int __init wm8960_modinit(void) +{ + int ret; + + ret = i2c_add_driver(&wm8960_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8960 I2C driver: %d\n", + ret); + } + + return ret; +} +module_init(wm8960_modinit); + +static void __exit wm8960_exit(void) +{ + i2c_del_driver(&wm8960_i2c_driver); +} +module_exit(wm8960_exit); + + +MODULE_DESCRIPTION("ASoC WM8960 driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h new file mode 100644 index 0000000..c9af56c --- /dev/null +++ b/sound/soc/codecs/wm8960.h @@ -0,0 +1,127 @@ +/* + * wm8960.h -- WM8960 Soc Audio driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8960_H +#define _WM8960_H + +/* WM8960 register space */ + + +#define WM8960_CACHEREGNUM 56 + +#define WM8960_LINVOL 0x0 +#define WM8960_RINVOL 0x1 +#define WM8960_LOUT1 0x2 +#define WM8960_ROUT1 0x3 +#define WM8960_CLOCK1 0x4 +#define WM8960_DACCTL1 0x5 +#define WM8960_DACCTL2 0x6 +#define WM8960_IFACE1 0x7 +#define WM8960_CLOCK2 0x8 +#define WM8960_IFACE2 0x9 +#define WM8960_LDAC 0xa +#define WM8960_RDAC 0xb + +#define WM8960_RESET 0xf +#define WM8960_3D 0x10 +#define WM8960_ALC1 0x11 +#define WM8960_ALC2 0x12 +#define WM8960_ALC3 0x13 +#define WM8960_NOISEG 0x14 +#define WM8960_LADC 0x15 +#define WM8960_RADC 0x16 +#define WM8960_ADDCTL1 0x17 +#define WM8960_ADDCTL2 0x18 +#define WM8960_POWER1 0x19 +#define WM8960_POWER2 0x1a +#define WM8960_ADDCTL3 0x1b +#define WM8960_APOP1 0x1c +#define WM8960_APOP2 0x1d + +#define WM8960_LINPATH 0x20 +#define WM8960_RINPATH 0x21 +#define WM8960_LOUTMIX 0x22 + +#define WM8960_ROUTMIX 0x25 +#define WM8960_MONOMIX1 0x26 +#define WM8960_MONOMIX2 0x27 +#define WM8960_LOUT2 0x28 +#define WM8960_ROUT2 0x29 +#define WM8960_MONO 0x2a +#define WM8960_INBMIX1 0x2b +#define WM8960_INBMIX2 0x2c +#define WM8960_BYPASS1 0x2d +#define WM8960_BYPASS2 0x2e +#define WM8960_POWER3 0x2f +#define WM8960_ADDCTL4 0x30 +#define WM8960_CLASSD1 0x31 + +#define WM8960_CLASSD3 0x33 +#define WM8960_PLL1 0x34 +#define WM8960_PLL2 0x35 +#define WM8960_PLL3 0x36 +#define WM8960_PLL4 0x37 + + +/* + * WM8960 Clock dividers + */ +#define WM8960_SYSCLKDIV 0 +#define WM8960_DACDIV 1 +#define WM8960_OPCLKDIV 2 +#define WM8960_DCLKDIV 3 +#define WM8960_TOCLKSEL 4 +#define WM8960_SYSCLKSEL 5 + +#define WM8960_SYSCLK_DIV_1 (0 << 1) +#define WM8960_SYSCLK_DIV_2 (2 << 1) + +#define WM8960_SYSCLK_MCLK (0 << 0) +#define WM8960_SYSCLK_PLL (1 << 0) + +#define WM8960_DAC_DIV_1 (0 << 3) +#define WM8960_DAC_DIV_1_5 (1 << 3) +#define WM8960_DAC_DIV_2 (2 << 3) +#define WM8960_DAC_DIV_3 (3 << 3) +#define WM8960_DAC_DIV_4 (4 << 3) +#define WM8960_DAC_DIV_5_5 (5 << 3) +#define WM8960_DAC_DIV_6 (6 << 3) + +#define WM8960_DCLK_DIV_1_5 (0 << 6) +#define WM8960_DCLK_DIV_2 (1 << 6) +#define WM8960_DCLK_DIV_3 (2 << 6) +#define WM8960_DCLK_DIV_4 (3 << 6) +#define WM8960_DCLK_DIV_6 (4 << 6) +#define WM8960_DCLK_DIV_8 (5 << 6) +#define WM8960_DCLK_DIV_12 (6 << 6) +#define WM8960_DCLK_DIV_16 (7 << 6) + +#define WM8960_TOCLK_F19 (0 << 1) +#define WM8960_TOCLK_F21 (1 << 1) + +#define WM8960_OPCLK_DIV_1 (0 << 0) +#define WM8960_OPCLK_DIV_2 (1 << 0) +#define WM8960_OPCLK_DIV_3 (2 << 0) +#define WM8960_OPCLK_DIV_4 (3 << 0) +#define WM8960_OPCLK_DIV_5_5 (4 << 0) +#define WM8960_OPCLK_DIV_6 (5 << 0) + +extern struct snd_soc_dai wm8960_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8960; + +#define WM8960_DRES_400R 0 +#define WM8960_DRES_200R 1 +#define WM8960_DRES_600R 2 +#define WM8960_DRES_150R 3 +#define WM8960_DRES_MAX 3 + +struct wm8960_data { + int dres; +}; + +#endif diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c new file mode 100644 index 0000000..c05f718 --- /dev/null +++ b/sound/soc/codecs/wm8988.c @@ -0,0 +1,1097 @@ +/* + * wm8988.c -- WM8988 ALSA SoC audio driver + * + * Copyright 2009 Wolfson Microelectronics plc + * Copyright 2005 Openedhand Ltd. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "wm8988.h" + +/* + * wm8988 register cache + * We can't read the WM8988 register space when we + * are using 2 wire for device control, so we cache them instead. + */ +static const u16 wm8988_reg[] = { + 0x0097, 0x0097, 0x0079, 0x0079, /* 0 */ + 0x0000, 0x0008, 0x0000, 0x000a, /* 4 */ + 0x0000, 0x0000, 0x00ff, 0x00ff, /* 8 */ + 0x000f, 0x000f, 0x0000, 0x0000, /* 12 */ + 0x0000, 0x007b, 0x0000, 0x0032, /* 16 */ + 0x0000, 0x00c3, 0x00c3, 0x00c0, /* 20 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 24 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 28 */ + 0x0000, 0x0000, 0x0050, 0x0050, /* 32 */ + 0x0050, 0x0050, 0x0050, 0x0050, /* 36 */ + 0x0079, 0x0079, 0x0079, /* 40 */ +}; + +/* codec private data */ +struct wm8988_priv { + unsigned int sysclk; + struct snd_soc_codec codec; + struct snd_pcm_hw_constraint_list *sysclk_constraints; + u16 reg_cache[WM8988_NUM_REG]; +}; + + +/* + * read wm8988 register cache + */ +static inline unsigned int wm8988_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg > WM8988_NUM_REG) + return -1; + return cache[reg]; +} + +/* + * write wm8988 register cache + */ +static inline void wm8988_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + if (reg > WM8988_NUM_REG) + return; + cache[reg] = value; +} + +static int wm8988_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + /* data is + * D15..D9 WM8753 register offset + * D8...D0 register data + */ + data[0] = (reg << 1) | ((value >> 8) & 0x0001); + data[1] = value & 0x00ff; + + wm8988_write_reg_cache(codec, reg, value); + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +#define wm8988_reset(c) wm8988_write(c, WM8988_RESET, 0) + +/* + * WM8988 Controls + */ + +static const char *bass_boost_txt[] = {"Linear Control", "Adaptive Boost"}; +static const struct soc_enum bass_boost = + SOC_ENUM_SINGLE(WM8988_BASS, 7, 2, bass_boost_txt); + +static const char *bass_filter_txt[] = { "130Hz @ 48kHz", "200Hz @ 48kHz" }; +static const struct soc_enum bass_filter = + SOC_ENUM_SINGLE(WM8988_BASS, 6, 2, bass_filter_txt); + +static const char *treble_txt[] = {"8kHz", "4kHz"}; +static const struct soc_enum treble = + SOC_ENUM_SINGLE(WM8988_TREBLE, 6, 2, treble_txt); + +static const char *stereo_3d_lc_txt[] = {"200Hz", "500Hz"}; +static const struct soc_enum stereo_3d_lc = + SOC_ENUM_SINGLE(WM8988_3D, 5, 2, stereo_3d_lc_txt); + +static const char *stereo_3d_uc_txt[] = {"2.2kHz", "1.5kHz"}; +static const struct soc_enum stereo_3d_uc = + SOC_ENUM_SINGLE(WM8988_3D, 6, 2, stereo_3d_uc_txt); + +static const char *stereo_3d_func_txt[] = {"Capture", "Playback"}; +static const struct soc_enum stereo_3d_func = + SOC_ENUM_SINGLE(WM8988_3D, 7, 2, stereo_3d_func_txt); + +static const char *alc_func_txt[] = {"Off", "Right", "Left", "Stereo"}; +static const struct soc_enum alc_func = + SOC_ENUM_SINGLE(WM8988_ALC1, 7, 4, alc_func_txt); + +static const char *ng_type_txt[] = {"Constant PGA Gain", + "Mute ADC Output"}; +static const struct soc_enum ng_type = + SOC_ENUM_SINGLE(WM8988_NGATE, 1, 2, ng_type_txt); + +static const char *deemph_txt[] = {"None", "32Khz", "44.1Khz", "48Khz"}; +static const struct soc_enum deemph = + SOC_ENUM_SINGLE(WM8988_ADCDAC, 1, 4, deemph_txt); + +static const char *adcpol_txt[] = {"Normal", "L Invert", "R Invert", + "L + R Invert"}; +static const struct soc_enum adcpol = + SOC_ENUM_SINGLE(WM8988_ADCDAC, 5, 4, adcpol_txt); + +static const DECLARE_TLV_DB_SCALE(pga_tlv, -1725, 75, 0); +static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1); +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); +static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); + +static const struct snd_kcontrol_new wm8988_snd_controls[] = { + +SOC_ENUM("Bass Boost", bass_boost), +SOC_ENUM("Bass Filter", bass_filter), +SOC_SINGLE("Bass Volume", WM8988_BASS, 0, 15, 1), + +SOC_SINGLE("Treble Volume", WM8988_TREBLE, 0, 15, 0), +SOC_ENUM("Treble Cut-off", treble), + +SOC_SINGLE("3D Switch", WM8988_3D, 0, 1, 0), +SOC_SINGLE("3D Volume", WM8988_3D, 1, 15, 0), +SOC_ENUM("3D Lower Cut-off", stereo_3d_lc), +SOC_ENUM("3D Upper Cut-off", stereo_3d_uc), +SOC_ENUM("3D Mode", stereo_3d_func), + +SOC_SINGLE("ALC Capture Target Volume", WM8988_ALC1, 0, 7, 0), +SOC_SINGLE("ALC Capture Max Volume", WM8988_ALC1, 4, 7, 0), +SOC_ENUM("ALC Capture Function", alc_func), +SOC_SINGLE("ALC Capture ZC Switch", WM8988_ALC2, 7, 1, 0), +SOC_SINGLE("ALC Capture Hold Time", WM8988_ALC2, 0, 15, 0), +SOC_SINGLE("ALC Capture Decay Time", WM8988_ALC3, 4, 15, 0), +SOC_SINGLE("ALC Capture Attack Time", WM8988_ALC3, 0, 15, 0), +SOC_SINGLE("ALC Capture NG Threshold", WM8988_NGATE, 3, 31, 0), +SOC_ENUM("ALC Capture NG Type", ng_type), +SOC_SINGLE("ALC Capture NG Switch", WM8988_NGATE, 0, 1, 0), + +SOC_SINGLE("ZC Timeout Switch", WM8988_ADCTL1, 0, 1, 0), + +SOC_DOUBLE_R_TLV("Capture Digital Volume", WM8988_LADC, WM8988_RADC, + 0, 255, 0, adc_tlv), +SOC_DOUBLE_R_TLV("Capture Volume", WM8988_LINVOL, WM8988_RINVOL, + 0, 63, 0, pga_tlv), +SOC_DOUBLE_R("Capture ZC Switch", WM8988_LINVOL, WM8988_RINVOL, 6, 1, 0), +SOC_DOUBLE_R("Capture Switch", WM8988_LINVOL, WM8988_RINVOL, 7, 1, 1), + +SOC_ENUM("Playback De-emphasis", deemph), + +SOC_ENUM("Capture Polarity", adcpol), +SOC_SINGLE("Playback 6dB Attenuate", WM8988_ADCDAC, 7, 1, 0), +SOC_SINGLE("Capture 6dB Attenuate", WM8988_ADCDAC, 8, 1, 0), + +SOC_DOUBLE_R_TLV("PCM Volume", WM8988_LDAC, WM8988_RDAC, 0, 255, 0, dac_tlv), + +SOC_SINGLE_TLV("Left Mixer Left Bypass Volume", WM8988_LOUTM1, 4, 7, 1, + bypass_tlv), +SOC_SINGLE_TLV("Left Mixer Right Bypass Volume", WM8988_LOUTM2, 4, 7, 1, + bypass_tlv), +SOC_SINGLE_TLV("Right Mixer Left Bypass Volume", WM8988_ROUTM1, 4, 7, 1, + bypass_tlv), +SOC_SINGLE_TLV("Right Mixer Right Bypass Volume", WM8988_ROUTM2, 4, 7, 1, + bypass_tlv), + +SOC_DOUBLE_R("Output 1 Playback ZC Switch", WM8988_LOUT1V, + WM8988_ROUT1V, 7, 1, 0), +SOC_DOUBLE_R_TLV("Output 1 Playback Volume", WM8988_LOUT1V, WM8988_ROUT1V, + 0, 127, 0, out_tlv), + +SOC_DOUBLE_R("Output 2 Playback ZC Switch", WM8988_LOUT2V, + WM8988_ROUT2V, 7, 1, 0), +SOC_DOUBLE_R_TLV("Output 2 Playback Volume", WM8988_LOUT2V, WM8988_ROUT2V, + 0, 127, 0, out_tlv), + +}; + +/* + * DAPM Controls + */ + +static int wm8988_lrc_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + u16 adctl2 = wm8988_read_reg_cache(codec, WM8988_ADCTL2); + + /* Use the DAC to gate LRC if active, otherwise use ADC */ + if (wm8988_read_reg_cache(codec, WM8988_PWR2) & 0x180) + adctl2 &= ~0x4; + else + adctl2 |= 0x4; + + return wm8988_write(codec, WM8988_ADCTL2, adctl2); +} + +static const char *wm8988_line_texts[] = { + "Line 1", "Line 2", "PGA", "Differential"}; + +static const unsigned int wm8988_line_values[] = { + 0, 1, 3, 4}; + +static const struct soc_enum wm8988_lline_enum = + SOC_VALUE_ENUM_SINGLE(WM8988_LOUTM1, 0, 7, + ARRAY_SIZE(wm8988_line_texts), + wm8988_line_texts, + wm8988_line_values); +static const struct snd_kcontrol_new wm8988_left_line_controls = + SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum); + +static const struct soc_enum wm8988_rline_enum = + SOC_VALUE_ENUM_SINGLE(WM8988_ROUTM1, 0, 7, + ARRAY_SIZE(wm8988_line_texts), + wm8988_line_texts, + wm8988_line_values); +static const struct snd_kcontrol_new wm8988_right_line_controls = + SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum); + +/* Left Mixer */ +static const struct snd_kcontrol_new wm8988_left_mixer_controls[] = { + SOC_DAPM_SINGLE("Playback Switch", WM8988_LOUTM1, 8, 1, 0), + SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_LOUTM1, 7, 1, 0), + SOC_DAPM_SINGLE("Right Playback Switch", WM8988_LOUTM2, 8, 1, 0), + SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_LOUTM2, 7, 1, 0), +}; + +/* Right Mixer */ +static const struct snd_kcontrol_new wm8988_right_mixer_controls[] = { + SOC_DAPM_SINGLE("Left Playback Switch", WM8988_ROUTM1, 8, 1, 0), + SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_ROUTM1, 7, 1, 0), + SOC_DAPM_SINGLE("Playback Switch", WM8988_ROUTM2, 8, 1, 0), + SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_ROUTM2, 7, 1, 0), +}; + +static const char *wm8988_pga_sel[] = {"Line 1", "Line 2", "Differential"}; +static const unsigned int wm8988_pga_val[] = { 0, 1, 3 }; + +/* Left PGA Mux */ +static const struct soc_enum wm8988_lpga_enum = + SOC_VALUE_ENUM_SINGLE(WM8988_LADCIN, 6, 3, + ARRAY_SIZE(wm8988_pga_sel), + wm8988_pga_sel, + wm8988_pga_val); +static const struct snd_kcontrol_new wm8988_left_pga_controls = + SOC_DAPM_VALUE_ENUM("Route", wm8988_lpga_enum); + +/* Right PGA Mux */ +static const struct soc_enum wm8988_rpga_enum = + SOC_VALUE_ENUM_SINGLE(WM8988_RADCIN, 6, 3, + ARRAY_SIZE(wm8988_pga_sel), + wm8988_pga_sel, + wm8988_pga_val); +static const struct snd_kcontrol_new wm8988_right_pga_controls = + SOC_DAPM_VALUE_ENUM("Route", wm8988_rpga_enum); + +/* Differential Mux */ +static const char *wm8988_diff_sel[] = {"Line 1", "Line 2"}; +static const struct soc_enum diffmux = + SOC_ENUM_SINGLE(WM8988_ADCIN, 8, 2, wm8988_diff_sel); +static const struct snd_kcontrol_new wm8988_diffmux_controls = + SOC_DAPM_ENUM("Route", diffmux); + +/* Mono ADC Mux */ +static const char *wm8988_mono_mux[] = {"Stereo", "Mono (Left)", + "Mono (Right)", "Digital Mono"}; +static const struct soc_enum monomux = + SOC_ENUM_SINGLE(WM8988_ADCIN, 6, 4, wm8988_mono_mux); +static const struct snd_kcontrol_new wm8988_monomux_controls = + SOC_DAPM_ENUM("Route", monomux); + +static const struct snd_soc_dapm_widget wm8988_dapm_widgets[] = { + SND_SOC_DAPM_MICBIAS("Mic Bias", WM8988_PWR1, 1, 0), + + SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0, + &wm8988_diffmux_controls), + SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0, + &wm8988_monomux_controls), + SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0, + &wm8988_monomux_controls), + + SND_SOC_DAPM_MUX("Left PGA Mux", WM8988_PWR1, 5, 0, + &wm8988_left_pga_controls), + SND_SOC_DAPM_MUX("Right PGA Mux", WM8988_PWR1, 4, 0, + &wm8988_right_pga_controls), + + SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0, + &wm8988_left_line_controls), + SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0, + &wm8988_right_line_controls), + + SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8988_PWR1, 2, 0), + SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8988_PWR1, 3, 0), + + SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8988_PWR2, 7, 0), + SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8988_PWR2, 8, 0), + + SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0, + &wm8988_left_mixer_controls[0], + ARRAY_SIZE(wm8988_left_mixer_controls)), + SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0, + &wm8988_right_mixer_controls[0], + ARRAY_SIZE(wm8988_right_mixer_controls)), + + SND_SOC_DAPM_PGA("Right Out 2", WM8988_PWR2, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("Left Out 2", WM8988_PWR2, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right Out 1", WM8988_PWR2, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("Left Out 1", WM8988_PWR2, 6, 0, NULL, 0), + + SND_SOC_DAPM_POST("LRC control", wm8988_lrc_control), + + SND_SOC_DAPM_OUTPUT("LOUT1"), + SND_SOC_DAPM_OUTPUT("ROUT1"), + SND_SOC_DAPM_OUTPUT("LOUT2"), + SND_SOC_DAPM_OUTPUT("ROUT2"), + SND_SOC_DAPM_OUTPUT("VREF"), + + SND_SOC_DAPM_INPUT("LINPUT1"), + SND_SOC_DAPM_INPUT("LINPUT2"), + SND_SOC_DAPM_INPUT("RINPUT1"), + SND_SOC_DAPM_INPUT("RINPUT2"), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + + { "Left Line Mux", "Line 1", "LINPUT1" }, + { "Left Line Mux", "Line 2", "LINPUT2" }, + { "Left Line Mux", "PGA", "Left PGA Mux" }, + { "Left Line Mux", "Differential", "Differential Mux" }, + + { "Right Line Mux", "Line 1", "RINPUT1" }, + { "Right Line Mux", "Line 2", "RINPUT2" }, + { "Right Line Mux", "PGA", "Right PGA Mux" }, + { "Right Line Mux", "Differential", "Differential Mux" }, + + { "Left PGA Mux", "Line 1", "LINPUT1" }, + { "Left PGA Mux", "Line 2", "LINPUT2" }, + { "Left PGA Mux", "Differential", "Differential Mux" }, + + { "Right PGA Mux", "Line 1", "RINPUT1" }, + { "Right PGA Mux", "Line 2", "RINPUT2" }, + { "Right PGA Mux", "Differential", "Differential Mux" }, + + { "Differential Mux", "Line 1", "LINPUT1" }, + { "Differential Mux", "Line 1", "RINPUT1" }, + { "Differential Mux", "Line 2", "LINPUT2" }, + { "Differential Mux", "Line 2", "RINPUT2" }, + + { "Left ADC Mux", "Stereo", "Left PGA Mux" }, + { "Left ADC Mux", "Mono (Left)", "Left PGA Mux" }, + { "Left ADC Mux", "Digital Mono", "Left PGA Mux" }, + + { "Right ADC Mux", "Stereo", "Right PGA Mux" }, + { "Right ADC Mux", "Mono (Right)", "Right PGA Mux" }, + { "Right ADC Mux", "Digital Mono", "Right PGA Mux" }, + + { "Left ADC", NULL, "Left ADC Mux" }, + { "Right ADC", NULL, "Right ADC Mux" }, + + { "Left Line Mux", "Line 1", "LINPUT1" }, + { "Left Line Mux", "Line 2", "LINPUT2" }, + { "Left Line Mux", "PGA", "Left PGA Mux" }, + { "Left Line Mux", "Differential", "Differential Mux" }, + + { "Right Line Mux", "Line 1", "RINPUT1" }, + { "Right Line Mux", "Line 2", "RINPUT2" }, + { "Right Line Mux", "PGA", "Right PGA Mux" }, + { "Right Line Mux", "Differential", "Differential Mux" }, + + { "Left Mixer", "Playback Switch", "Left DAC" }, + { "Left Mixer", "Left Bypass Switch", "Left Line Mux" }, + { "Left Mixer", "Right Playback Switch", "Right DAC" }, + { "Left Mixer", "Right Bypass Switch", "Right Line Mux" }, + + { "Right Mixer", "Left Playback Switch", "Left DAC" }, + { "Right Mixer", "Left Bypass Switch", "Left Line Mux" }, + { "Right Mixer", "Playback Switch", "Right DAC" }, + { "Right Mixer", "Right Bypass Switch", "Right Line Mux" }, + + { "Left Out 1", NULL, "Left Mixer" }, + { "LOUT1", NULL, "Left Out 1" }, + { "Right Out 1", NULL, "Right Mixer" }, + { "ROUT1", NULL, "Right Out 1" }, + + { "Left Out 2", NULL, "Left Mixer" }, + { "LOUT2", NULL, "Left Out 2" }, + { "Right Out 2", NULL, "Right Mixer" }, + { "ROUT2", NULL, "Right Out 2" }, +}; + +struct _coeff_div { + u32 mclk; + u32 rate; + u16 fs; + u8 sr:5; + u8 usb:1; +}; + +/* codec hifi mclk clock divider coefficients */ +static const struct _coeff_div coeff_div[] = { + /* 8k */ + {12288000, 8000, 1536, 0x6, 0x0}, + {11289600, 8000, 1408, 0x16, 0x0}, + {18432000, 8000, 2304, 0x7, 0x0}, + {16934400, 8000, 2112, 0x17, 0x0}, + {12000000, 8000, 1500, 0x6, 0x1}, + + /* 11.025k */ + {11289600, 11025, 1024, 0x18, 0x0}, + {16934400, 11025, 1536, 0x19, 0x0}, + {12000000, 11025, 1088, 0x19, 0x1}, + + /* 16k */ + {12288000, 16000, 768, 0xa, 0x0}, + {18432000, 16000, 1152, 0xb, 0x0}, + {12000000, 16000, 750, 0xa, 0x1}, + + /* 22.05k */ + {11289600, 22050, 512, 0x1a, 0x0}, + {16934400, 22050, 768, 0x1b, 0x0}, + {12000000, 22050, 544, 0x1b, 0x1}, + + /* 32k */ + {12288000, 32000, 384, 0xc, 0x0}, + {18432000, 32000, 576, 0xd, 0x0}, + {12000000, 32000, 375, 0xa, 0x1}, + + /* 44.1k */ + {11289600, 44100, 256, 0x10, 0x0}, + {16934400, 44100, 384, 0x11, 0x0}, + {12000000, 44100, 272, 0x11, 0x1}, + + /* 48k */ + {12288000, 48000, 256, 0x0, 0x0}, + {18432000, 48000, 384, 0x1, 0x0}, + {12000000, 48000, 250, 0x0, 0x1}, + + /* 88.2k */ + {11289600, 88200, 128, 0x1e, 0x0}, + {16934400, 88200, 192, 0x1f, 0x0}, + {12000000, 88200, 136, 0x1f, 0x1}, + + /* 96k */ + {12288000, 96000, 128, 0xe, 0x0}, + {18432000, 96000, 192, 0xf, 0x0}, + {12000000, 96000, 125, 0xe, 0x1}, +}; + +static inline int get_coeff(int mclk, int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(coeff_div); i++) { + if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk) + return i; + } + + return -EINVAL; +} + +/* The set of rates we can generate from the above for each SYSCLK */ + +static unsigned int rates_12288[] = { + 8000, 12000, 16000, 24000, 24000, 32000, 48000, 96000, +}; + +static struct snd_pcm_hw_constraint_list constraints_12288 = { + .count = ARRAY_SIZE(rates_12288), + .list = rates_12288, +}; + +static unsigned int rates_112896[] = { + 8000, 11025, 22050, 44100, +}; + +static struct snd_pcm_hw_constraint_list constraints_112896 = { + .count = ARRAY_SIZE(rates_112896), + .list = rates_112896, +}; + +static unsigned int rates_12[] = { + 8000, 11025, 12000, 16000, 22050, 2400, 32000, 41100, 48000, + 48000, 88235, 96000, +}; + +static struct snd_pcm_hw_constraint_list constraints_12 = { + .count = ARRAY_SIZE(rates_12), + .list = rates_12, +}; + +/* + * Note that this should be called from init rather than from hw_params. + */ +static int wm8988_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8988_priv *wm8988 = codec->private_data; + + switch (freq) { + case 11289600: + case 18432000: + case 22579200: + case 36864000: + wm8988->sysclk_constraints = &constraints_112896; + wm8988->sysclk = freq; + return 0; + + case 12288000: + case 16934400: + case 24576000: + case 33868800: + wm8988->sysclk_constraints = &constraints_12288; + wm8988->sysclk = freq; + return 0; + + case 12000000: + case 24000000: + wm8988->sysclk_constraints = &constraints_12; + wm8988->sysclk = freq; + return 0; + } + return -EINVAL; +} + +static int wm8988_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface = 0x0040; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0002; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0001; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= 0x0013; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0090; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0080; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0010; + break; + default: + return -EINVAL; + } + + wm8988_write(codec, WM8988_IFACE, iface); + return 0; +} + +static int wm8988_pcm_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8988_priv *wm8988 = codec->private_data; + + /* The set of sample rates that can be supported depends on the + * MCLK supplied to the CODEC - enforce this. + */ + if (!wm8988->sysclk) { + dev_err(codec->dev, + "No MCLK configured, call set_sysclk() on init\n"); + return -EINVAL; + } + + snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + wm8988->sysclk_constraints); + + return 0; +} + +static int wm8988_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + struct wm8988_priv *wm8988 = codec->private_data; + u16 iface = wm8988_read_reg_cache(codec, WM8988_IFACE) & 0x1f3; + u16 srate = wm8988_read_reg_cache(codec, WM8988_SRATE) & 0x180; + int coeff; + + coeff = get_coeff(wm8988->sysclk, params_rate(params)); + if (coeff < 0) { + coeff = get_coeff(wm8988->sysclk / 2, params_rate(params)); + srate |= 0x40; + } + if (coeff < 0) { + dev_err(codec->dev, + "Unable to configure sample rate %dHz with %dHz MCLK\n", + params_rate(params), wm8988->sysclk); + return coeff; + } + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0004; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0008; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x000c; + break; + } + + /* set iface & srate */ + wm8988_write(codec, WM8988_IFACE, iface); + if (coeff >= 0) + wm8988_write(codec, WM8988_SRATE, srate | + (coeff_div[coeff].sr << 1) | coeff_div[coeff].usb); + + return 0; +} + +static int wm8988_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 mute_reg = wm8988_read_reg_cache(codec, WM8988_ADCDAC) & 0xfff7; + + if (mute) + wm8988_write(codec, WM8988_ADCDAC, mute_reg | 0x8); + else + wm8988_write(codec, WM8988_ADCDAC, mute_reg); + return 0; +} + +static int wm8988_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 pwr_reg = wm8988_read_reg_cache(codec, WM8988_PWR1) & ~0x1c1; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + /* VREF, VMID=2x50k, digital enabled */ + wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x00c0); + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* VREF, VMID=2x5k */ + wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x1c1); + + /* Charge caps */ + msleep(100); + } + + /* VREF, VMID=2*500k, digital stopped */ + wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x0141); + break; + + case SND_SOC_BIAS_OFF: + wm8988_write(codec, WM8988_PWR1, 0x0000); + break; + } + codec->bias_level = level; + return 0; +} + +#define WM8988_RATES SNDRV_PCM_RATE_8000_96000 + +#define WM8988_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_ops wm8988_ops = { + .startup = wm8988_pcm_startup, + .hw_params = wm8988_pcm_hw_params, + .set_fmt = wm8988_set_dai_fmt, + .set_sysclk = wm8988_set_dai_sysclk, + .digital_mute = wm8988_mute, +}; + +struct snd_soc_dai wm8988_dai = { + .name = "WM8988", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8988_RATES, + .formats = WM8988_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8988_RATES, + .formats = WM8988_FORMATS, + }, + .ops = &wm8988_ops, + .symmetric_rates = 1, +}; +EXPORT_SYMBOL_GPL(wm8988_dai); + +static int wm8988_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + wm8988_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8988_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + int i; + u8 data[2]; + u16 *cache = codec->reg_cache; + + /* Sync reg_cache with the hardware */ + for (i = 0; i < WM8988_NUM_REG; i++) { + if (i == WM8988_RESET) + continue; + data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001); + data[1] = cache[i] & 0x00ff; + codec->hw_write(codec->control_data, data, 2); + } + + wm8988_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + return 0; +} + +static struct snd_soc_codec *wm8988_codec; + +static int wm8988_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + if (wm8988_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = wm8988_codec; + codec = wm8988_codec; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + snd_soc_add_controls(codec, wm8988_snd_controls, + ARRAY_SIZE(wm8988_snd_controls)); + snd_soc_dapm_new_controls(codec, wm8988_dapm_widgets, + ARRAY_SIZE(wm8988_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + snd_soc_dapm_new_widgets(codec); + + ret = snd_soc_init_card(socdev); + if (ret < 0) { + dev_err(codec->dev, "failed to register card: %d\n", ret); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + return ret; +} + +static int wm8988_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8988 = { + .probe = wm8988_probe, + .remove = wm8988_remove, + .suspend = wm8988_suspend, + .resume = wm8988_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8988); + +static int wm8988_register(struct wm8988_priv *wm8988) +{ + struct snd_soc_codec *codec = &wm8988->codec; + int ret; + u16 reg; + + if (wm8988_codec) { + dev_err(codec->dev, "Another WM8988 is registered\n"); + ret = -EINVAL; + goto err; + } + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->private_data = wm8988; + codec->name = "WM8988"; + codec->owner = THIS_MODULE; + codec->read = wm8988_read_reg_cache; + codec->write = wm8988_write; + codec->dai = &wm8988_dai; + codec->num_dai = 1; + codec->reg_cache_size = ARRAY_SIZE(wm8988->reg_cache); + codec->reg_cache = &wm8988->reg_cache; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = wm8988_set_bias_level; + + memcpy(codec->reg_cache, wm8988_reg, + sizeof(wm8988_reg)); + + ret = wm8988_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + return ret; + } + + /* set the update bits (we always update left then right) */ + reg = wm8988_read_reg_cache(codec, WM8988_RADC); + wm8988_write(codec, WM8988_RADC, reg | 0x100); + reg = wm8988_read_reg_cache(codec, WM8988_RDAC); + wm8988_write(codec, WM8988_RDAC, reg | 0x0100); + reg = wm8988_read_reg_cache(codec, WM8988_ROUT1V); + wm8988_write(codec, WM8988_ROUT1V, reg | 0x0100); + reg = wm8988_read_reg_cache(codec, WM8988_ROUT2V); + wm8988_write(codec, WM8988_ROUT2V, reg | 0x0100); + reg = wm8988_read_reg_cache(codec, WM8988_RINVOL); + wm8988_write(codec, WM8988_RINVOL, reg | 0x0100); + + wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_STANDBY); + + wm8988_dai.dev = codec->dev; + + wm8988_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm8988_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + return 0; + +err: + kfree(wm8988); + return ret; +} + +static void wm8988_unregister(struct wm8988_priv *wm8988) +{ + wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_OFF); + snd_soc_unregister_dai(&wm8988_dai); + snd_soc_unregister_codec(&wm8988->codec); + kfree(wm8988); + wm8988_codec = NULL; +} + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static int wm8988_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8988_priv *wm8988; + struct snd_soc_codec *codec; + + wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL); + if (wm8988 == NULL) + return -ENOMEM; + + codec = &wm8988->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + + i2c_set_clientdata(i2c, wm8988); + codec->control_data = i2c; + + codec->dev = &i2c->dev; + + return wm8988_register(wm8988); +} + +static int wm8988_i2c_remove(struct i2c_client *client) +{ + struct wm8988_priv *wm8988 = i2c_get_clientdata(client); + wm8988_unregister(wm8988); + return 0; +} + +static const struct i2c_device_id wm8988_i2c_id[] = { + { "wm8988", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8988_i2c_id); + +static struct i2c_driver wm8988_i2c_driver = { + .driver = { + .name = "WM8988", + .owner = THIS_MODULE, + }, + .probe = wm8988_i2c_probe, + .remove = wm8988_i2c_remove, + .id_table = wm8988_i2c_id, +}; +#endif + +#if defined(CONFIG_SPI_MASTER) +static int wm8988_spi_write(struct spi_device *spi, const char *data, int len) +{ + struct spi_transfer t; + struct spi_message m; + u8 msg[2]; + + if (len <= 0) + return 0; + + msg[0] = data[0]; + msg[1] = data[1]; + + spi_message_init(&m); + memset(&t, 0, (sizeof t)); + + t.tx_buf = &msg[0]; + t.len = len; + + spi_message_add_tail(&t, &m); + spi_sync(spi, &m); + + return len; +} + +static int __devinit wm8988_spi_probe(struct spi_device *spi) +{ + struct wm8988_priv *wm8988; + struct snd_soc_codec *codec; + + wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL); + if (wm8988 == NULL) + return -ENOMEM; + + codec = &wm8988->codec; + codec->hw_write = (hw_write_t)wm8988_spi_write; + codec->control_data = spi; + codec->dev = &spi->dev; + + spi->dev.driver_data = wm8988; + + return wm8988_register(wm8988); +} + +static int __devexit wm8988_spi_remove(struct spi_device *spi) +{ + struct wm8988_priv *wm8988 = spi->dev.driver_data; + + wm8988_unregister(wm8988); + + return 0; +} + +static struct spi_driver wm8988_spi_driver = { + .driver = { + .name = "wm8988", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm8988_spi_probe, + .remove = __devexit_p(wm8988_spi_remove), +}; +#endif + +static int __init wm8988_modinit(void) +{ + int ret; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8988_i2c_driver); + if (ret != 0) + pr_err("WM8988: Unable to register I2C driver: %d\n", ret); +#endif +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&wm8988_spi_driver); + if (ret != 0) + pr_err("WM8988: Unable to register SPI driver: %d\n", ret); +#endif + return ret; +} +module_init(wm8988_modinit); + +static void __exit wm8988_exit(void) +{ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8988_i2c_driver); +#endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8988_spi_driver); +#endif +} +module_exit(wm8988_exit); + + +MODULE_DESCRIPTION("ASoC WM8988 driver"); +MODULE_AUTHOR("Mark Brown "); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8988.h b/sound/soc/codecs/wm8988.h new file mode 100644 index 0000000..4552d37 --- /dev/null +++ b/sound/soc/codecs/wm8988.h @@ -0,0 +1,60 @@ +/* + * Copyright 2005 Openedhand Ltd. + * + * Author: Richard Purdie + * + * Based on WM8753.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _WM8988_H +#define _WM8988_H + +/* WM8988 register space */ + +#define WM8988_LINVOL 0x00 +#define WM8988_RINVOL 0x01 +#define WM8988_LOUT1V 0x02 +#define WM8988_ROUT1V 0x03 +#define WM8988_ADCDAC 0x05 +#define WM8988_IFACE 0x07 +#define WM8988_SRATE 0x08 +#define WM8988_LDAC 0x0a +#define WM8988_RDAC 0x0b +#define WM8988_BASS 0x0c +#define WM8988_TREBLE 0x0d +#define WM8988_RESET 0x0f +#define WM8988_3D 0x10 +#define WM8988_ALC1 0x11 +#define WM8988_ALC2 0x12 +#define WM8988_ALC3 0x13 +#define WM8988_NGATE 0x14 +#define WM8988_LADC 0x15 +#define WM8988_RADC 0x16 +#define WM8988_ADCTL1 0x17 +#define WM8988_ADCTL2 0x18 +#define WM8988_PWR1 0x19 +#define WM8988_PWR2 0x1a +#define WM8988_ADCTL3 0x1b +#define WM8988_ADCIN 0x1f +#define WM8988_LADCIN 0x20 +#define WM8988_RADCIN 0x21 +#define WM8988_LOUTM1 0x22 +#define WM8988_LOUTM2 0x23 +#define WM8988_ROUTM1 0x24 +#define WM8988_ROUTM2 0x25 +#define WM8988_LOUT2V 0x28 +#define WM8988_ROUT2V 0x29 +#define WM8988_LPPB 0x43 +#define WM8988_NUM_REG 0x44 + +#define WM8988_SYSCLK 0 + +extern struct snd_soc_dai wm8988_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8988; + +#endif diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 40cd274..d029818 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -998,7 +998,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int target, if ((Ndiv < 6) || (Ndiv > 12)) printk(KERN_WARNING - "WM8990 N value outwith recommended range! N = %d\n", Ndiv); + "WM8990 N value outwith recommended range! N = %u\n", Ndiv); pll_div->n = Ndiv; Nmod = target % source; diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c new file mode 100644 index 0000000..86fc57e --- /dev/null +++ b/sound/soc/codecs/wm9081.c @@ -0,0 +1,1534 @@ +/* + * wm9081.c -- WM9081 ALSA SoC Audio driver + * + * Author: Mark Brown + * + * Copyright 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "wm9081.h" + +static u16 wm9081_reg_defaults[] = { + 0x0000, /* R0 - Software Reset */ + 0x0000, /* R1 */ + 0x00B9, /* R2 - Analogue Lineout */ + 0x00B9, /* R3 - Analogue Speaker PGA */ + 0x0001, /* R4 - VMID Control */ + 0x0068, /* R5 - Bias Control 1 */ + 0x0000, /* R6 */ + 0x0000, /* R7 - Analogue Mixer */ + 0x0000, /* R8 - Anti Pop Control */ + 0x01DB, /* R9 - Analogue Speaker 1 */ + 0x0018, /* R10 - Analogue Speaker 2 */ + 0x0180, /* R11 - Power Management */ + 0x0000, /* R12 - Clock Control 1 */ + 0x0038, /* R13 - Clock Control 2 */ + 0x4000, /* R14 - Clock Control 3 */ + 0x0000, /* R15 */ + 0x0000, /* R16 - FLL Control 1 */ + 0x0200, /* R17 - FLL Control 2 */ + 0x0000, /* R18 - FLL Control 3 */ + 0x0204, /* R19 - FLL Control 4 */ + 0x0000, /* R20 - FLL Control 5 */ + 0x0000, /* R21 */ + 0x0000, /* R22 - Audio Interface 1 */ + 0x0002, /* R23 - Audio Interface 2 */ + 0x0008, /* R24 - Audio Interface 3 */ + 0x0022, /* R25 - Audio Interface 4 */ + 0x0000, /* R26 - Interrupt Status */ + 0x0006, /* R27 - Interrupt Status Mask */ + 0x0000, /* R28 - Interrupt Polarity */ + 0x0000, /* R29 - Interrupt Control */ + 0x00C0, /* R30 - DAC Digital 1 */ + 0x0008, /* R31 - DAC Digital 2 */ + 0x09AF, /* R32 - DRC 1 */ + 0x4201, /* R33 - DRC 2 */ + 0x0000, /* R34 - DRC 3 */ + 0x0000, /* R35 - DRC 4 */ + 0x0000, /* R36 */ + 0x0000, /* R37 */ + 0x0000, /* R38 - Write Sequencer 1 */ + 0x0000, /* R39 - Write Sequencer 2 */ + 0x0002, /* R40 - MW Slave 1 */ + 0x0000, /* R41 */ + 0x0000, /* R42 - EQ 1 */ + 0x0000, /* R43 - EQ 2 */ + 0x0FCA, /* R44 - EQ 3 */ + 0x0400, /* R45 - EQ 4 */ + 0x00B8, /* R46 - EQ 5 */ + 0x1EB5, /* R47 - EQ 6 */ + 0xF145, /* R48 - EQ 7 */ + 0x0B75, /* R49 - EQ 8 */ + 0x01C5, /* R50 - EQ 9 */ + 0x169E, /* R51 - EQ 10 */ + 0xF829, /* R52 - EQ 11 */ + 0x07AD, /* R53 - EQ 12 */ + 0x1103, /* R54 - EQ 13 */ + 0x1C58, /* R55 - EQ 14 */ + 0xF373, /* R56 - EQ 15 */ + 0x0A54, /* R57 - EQ 16 */ + 0x0558, /* R58 - EQ 17 */ + 0x0564, /* R59 - EQ 18 */ + 0x0559, /* R60 - EQ 19 */ + 0x4000, /* R61 - EQ 20 */ +}; + +static struct { + int ratio; + int clk_sys_rate; +} clk_sys_rates[] = { + { 64, 0 }, + { 128, 1 }, + { 192, 2 }, + { 256, 3 }, + { 384, 4 }, + { 512, 5 }, + { 768, 6 }, + { 1024, 7 }, + { 1408, 8 }, + { 1536, 9 }, +}; + +static struct { + int rate; + int sample_rate; +} sample_rates[] = { + { 8000, 0 }, + { 11025, 1 }, + { 12000, 2 }, + { 16000, 3 }, + { 22050, 4 }, + { 24000, 5 }, + { 32000, 6 }, + { 44100, 7 }, + { 48000, 8 }, + { 88200, 9 }, + { 96000, 10 }, +}; + +static struct { + int div; /* *10 due to .5s */ + int bclk_div; +} bclk_divs[] = { + { 10, 0 }, + { 15, 1 }, + { 20, 2 }, + { 30, 3 }, + { 40, 4 }, + { 50, 5 }, + { 55, 6 }, + { 60, 7 }, + { 80, 8 }, + { 100, 9 }, + { 110, 10 }, + { 120, 11 }, + { 160, 12 }, + { 200, 13 }, + { 220, 14 }, + { 240, 15 }, + { 250, 16 }, + { 300, 17 }, + { 320, 18 }, + { 440, 19 }, + { 480, 20 }, +}; + +struct wm9081_priv { + struct snd_soc_codec codec; + u16 reg_cache[WM9081_MAX_REGISTER + 1]; + int sysclk_source; + int mclk_rate; + int sysclk_rate; + int fs; + int bclk; + int master; + int fll_fref; + int fll_fout; + struct wm9081_retune_mobile_config *retune; +}; + +static int wm9081_reg_is_volatile(int reg) +{ + switch (reg) { + default: + return 0; + } +} + +static unsigned int wm9081_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + BUG_ON(reg > WM9081_MAX_REGISTER); + return cache[reg]; +} + +static unsigned int wm9081_read_hw(struct snd_soc_codec *codec, u8 reg) +{ + struct i2c_msg xfer[2]; + u16 data; + int ret; + struct i2c_client *client = codec->control_data; + + BUG_ON(reg > WM9081_MAX_REGISTER); + + /* Write register */ + xfer[0].addr = client->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = ® + + /* Read data */ + xfer[1].addr = client->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = 2; + xfer[1].buf = (u8 *)&data; + + ret = i2c_transfer(client->adapter, xfer, 2); + if (ret != 2) { + dev_err(&client->dev, "i2c_transfer() returned %d\n", ret); + return 0; + } + + return (data >> 8) | ((data & 0xff) << 8); +} + +static unsigned int wm9081_read(struct snd_soc_codec *codec, unsigned int reg) +{ + if (wm9081_reg_is_volatile(reg)) + return wm9081_read_hw(codec, reg); + else + return wm9081_read_reg_cache(codec, reg); +} + +static int wm9081_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u16 *cache = codec->reg_cache; + u8 data[3]; + + BUG_ON(reg > WM9081_MAX_REGISTER); + + if (!wm9081_reg_is_volatile(reg)) + cache[reg] = value; + + data[0] = reg; + data[1] = value >> 8; + data[2] = value & 0x00ff; + + if (codec->hw_write(codec->control_data, data, 3) == 3) + return 0; + else + return -EIO; +} + +static int wm9081_reset(struct snd_soc_codec *codec) +{ + return wm9081_write(codec, WM9081_SOFTWARE_RESET, 0); +} + +static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0); +static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0); +static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0); +static unsigned int drc_max_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0), +}; +static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0); +static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0); + +static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); + +static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0); +static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1); +static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); + +static const char *drc_high_text[] = { + "1", + "1/2", + "1/4", + "1/8", + "1/16", + "0", +}; + +static const struct soc_enum drc_high = + SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text); + +static const char *drc_low_text[] = { + "1", + "1/2", + "1/4", + "1/8", + "0", +}; + +static const struct soc_enum drc_low = + SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text); + +static const char *drc_atk_text[] = { + "181us", + "181us", + "363us", + "726us", + "1.45ms", + "2.9ms", + "5.8ms", + "11.6ms", + "23.2ms", + "46.4ms", + "92.8ms", + "185.6ms", +}; + +static const struct soc_enum drc_atk = + SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text); + +static const char *drc_dcy_text[] = { + "186ms", + "372ms", + "743ms", + "1.49s", + "2.97s", + "5.94s", + "11.89s", + "23.78s", + "47.56s", +}; + +static const struct soc_enum drc_dcy = + SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text); + +static const char *drc_qr_dcy_text[] = { + "0.725ms", + "1.45ms", + "5.8ms", +}; + +static const struct soc_enum drc_qr_dcy = + SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text); + +static const char *dac_deemph_text[] = { + "None", + "32kHz", + "44.1kHz", + "48kHz", +}; + +static const struct soc_enum dac_deemph = + SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text); + +static const char *speaker_mode_text[] = { + "Class D", + "Class AB", +}; + +static const struct soc_enum speaker_mode = + SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text); + +static int speaker_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg; + + reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2); + if (reg & WM9081_SPK_MODE) + ucontrol->value.integer.value[0] = 1; + else + ucontrol->value.integer.value[0] = 0; + + return 0; +} + +/* + * Stop any attempts to change speaker mode while the speaker is enabled. + * + * We also have some special anti-pop controls dependant on speaker + * mode which must be changed along with the mode. + */ +static int speaker_mode_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg_pwr = wm9081_read(codec, WM9081_POWER_MANAGEMENT); + unsigned int reg2 = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2); + + /* Are we changing anything? */ + if (ucontrol->value.integer.value[0] == + ((reg2 & WM9081_SPK_MODE) != 0)) + return 0; + + /* Don't try to change modes while enabled */ + if (reg_pwr & WM9081_SPK_ENA) + return -EINVAL; + + if (ucontrol->value.integer.value[0]) { + /* Class AB */ + reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL); + reg2 |= WM9081_SPK_MODE; + } else { + /* Class D */ + reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL; + reg2 &= ~WM9081_SPK_MODE; + } + + wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2); + + return 0; +} + +static const struct snd_kcontrol_new wm9081_snd_controls[] = { +SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv), +SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv), + +SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv), + +SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1), +SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0), +SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv), + +SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0), +SOC_ENUM("DRC High Slope", drc_high), +SOC_ENUM("DRC Low Slope", drc_low), +SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv), +SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv), +SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv), +SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv), +SOC_ENUM("DRC Attack", drc_atk), +SOC_ENUM("DRC Decay", drc_dcy), +SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0), +SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv), +SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy), +SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv), + +SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0), + +SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0), +SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0), +SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1), +SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0), +SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0, + out_tlv), +SOC_ENUM("DAC Deemphasis", dac_deemph), +SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put), +}; + +static const struct snd_kcontrol_new wm9081_eq_controls[] = { +SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv), +SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv), +SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv), +SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv), +SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv), +}; + +static const struct snd_kcontrol_new mixer[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0), +SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0), +SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0), +}; + +static int speaker_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + unsigned int reg = wm9081_read(codec, WM9081_POWER_MANAGEMENT); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + reg |= WM9081_SPK_ENA; + break; + + case SND_SOC_DAPM_PRE_PMD: + reg &= ~WM9081_SPK_ENA; + break; + } + + wm9081_write(codec, WM9081_POWER_MANAGEMENT, reg); + + return 0; +} + +struct _fll_div { + u16 fll_fratio; + u16 fll_outdiv; + u16 fll_clk_ref_div; + u16 n; + u16 k; +}; + +/* The size in bits of the FLL divide multiplied by 10 + * to allow rounding later */ +#define FIXED_FLL_SIZE ((1 << 16) * 10) + +static struct { + unsigned int min; + unsigned int max; + u16 fll_fratio; + int ratio; +} fll_fratios[] = { + { 0, 64000, 4, 16 }, + { 64000, 128000, 3, 8 }, + { 128000, 256000, 2, 4 }, + { 256000, 1000000, 1, 2 }, + { 1000000, 13500000, 0, 1 }, +}; + +static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, + unsigned int Fout) +{ + u64 Kpart; + unsigned int K, Ndiv, Nmod, target; + unsigned int div; + int i; + + /* Fref must be <=13.5MHz */ + div = 1; + while ((Fref / div) > 13500000) { + div *= 2; + + if (div > 8) { + pr_err("Can't scale %dMHz input down to <=13.5MHz\n", + Fref); + return -EINVAL; + } + } + fll_div->fll_clk_ref_div = div / 2; + + pr_debug("Fref=%u Fout=%u\n", Fref, Fout); + + /* Apply the division for our remaining calculations */ + Fref /= div; + + /* Fvco should be 90-100MHz; don't check the upper bound */ + div = 0; + target = Fout * 2; + while (target < 90000000) { + div++; + target *= 2; + if (div > 7) { + pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", + Fout); + return -EINVAL; + } + } + fll_div->fll_outdiv = div; + + pr_debug("Fvco=%dHz\n", target); + + /* Find an appropraite FLL_FRATIO and factor it out of the target */ + for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { + if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { + fll_div->fll_fratio = fll_fratios[i].fll_fratio; + target /= fll_fratios[i].ratio; + break; + } + } + if (i == ARRAY_SIZE(fll_fratios)) { + pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); + return -EINVAL; + } + + /* Now, calculate N.K */ + Ndiv = target / Fref; + + fll_div->n = Ndiv; + Nmod = target % Fref; + pr_debug("Nmod=%d\n", Nmod); + + /* Calculate fractional part - scale up so we can round. */ + Kpart = FIXED_FLL_SIZE * (long long)Nmod; + + do_div(Kpart, Fref); + + K = Kpart & 0xFFFFFFFF; + + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + fll_div->k = K / 10; + + pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n", + fll_div->n, fll_div->k, + fll_div->fll_fratio, fll_div->fll_outdiv, + fll_div->fll_clk_ref_div); + + return 0; +} + +static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id, + unsigned int Fref, unsigned int Fout) +{ + struct wm9081_priv *wm9081 = codec->private_data; + u16 reg1, reg4, reg5; + struct _fll_div fll_div; + int ret; + int clk_sys_reg; + + /* Any change? */ + if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout) + return 0; + + /* Disable the FLL */ + if (Fout == 0) { + dev_dbg(codec->dev, "FLL disabled\n"); + wm9081->fll_fref = 0; + wm9081->fll_fout = 0; + + return 0; + } + + ret = fll_factors(&fll_div, Fref, Fout); + if (ret != 0) + return ret; + + reg5 = wm9081_read(codec, WM9081_FLL_CONTROL_5); + reg5 &= ~WM9081_FLL_CLK_SRC_MASK; + + switch (fll_id) { + case WM9081_SYSCLK_FLL_MCLK: + reg5 |= 0x1; + break; + + default: + dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id); + return -EINVAL; + } + + /* Disable CLK_SYS while we reconfigure */ + clk_sys_reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3); + if (clk_sys_reg & WM9081_CLK_SYS_ENA) + wm9081_write(codec, WM9081_CLOCK_CONTROL_3, + clk_sys_reg & ~WM9081_CLK_SYS_ENA); + + /* Any FLL configuration change requires that the FLL be + * disabled first. */ + reg1 = wm9081_read(codec, WM9081_FLL_CONTROL_1); + reg1 &= ~WM9081_FLL_ENA; + wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1); + + /* Apply the configuration */ + if (fll_div.k) + reg1 |= WM9081_FLL_FRAC_MASK; + else + reg1 &= ~WM9081_FLL_FRAC_MASK; + wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1); + + wm9081_write(codec, WM9081_FLL_CONTROL_2, + (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) | + (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT)); + wm9081_write(codec, WM9081_FLL_CONTROL_3, fll_div.k); + + reg4 = wm9081_read(codec, WM9081_FLL_CONTROL_4); + reg4 &= ~WM9081_FLL_N_MASK; + reg4 |= fll_div.n << WM9081_FLL_N_SHIFT; + wm9081_write(codec, WM9081_FLL_CONTROL_4, reg4); + + reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK; + reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT; + wm9081_write(codec, WM9081_FLL_CONTROL_5, reg5); + + /* Enable the FLL */ + wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA); + + /* Then bring CLK_SYS up again if it was disabled */ + if (clk_sys_reg & WM9081_CLK_SYS_ENA) + wm9081_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg); + + dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout); + + wm9081->fll_fref = Fref; + wm9081->fll_fout = Fout; + + return 0; +} + +static int configure_clock(struct snd_soc_codec *codec) +{ + struct wm9081_priv *wm9081 = codec->private_data; + int new_sysclk, i, target; + unsigned int reg; + int ret = 0; + int mclkdiv = 0; + int fll = 0; + + switch (wm9081->sysclk_source) { + case WM9081_SYSCLK_MCLK: + if (wm9081->mclk_rate > 12225000) { + mclkdiv = 1; + wm9081->sysclk_rate = wm9081->mclk_rate / 2; + } else { + wm9081->sysclk_rate = wm9081->mclk_rate; + } + wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0); + break; + + case WM9081_SYSCLK_FLL_MCLK: + /* If we have a sample rate calculate a CLK_SYS that + * gives us a suitable DAC configuration, plus BCLK. + * Ideally we would check to see if we can clock + * directly from MCLK and only use the FLL if this is + * not the case, though care must be taken with free + * running mode. + */ + if (wm9081->master && wm9081->bclk) { + /* Make sure we can generate CLK_SYS and BCLK + * and that we've got 3MHz for optimal + * performance. */ + for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { + target = wm9081->fs * clk_sys_rates[i].ratio; + new_sysclk = target; + if (target >= wm9081->bclk && + target > 3000000) + break; + } + } else if (wm9081->fs) { + for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { + new_sysclk = clk_sys_rates[i].ratio + * wm9081->fs; + if (new_sysclk > 3000000) + break; + } + } else { + new_sysclk = 12288000; + } + + ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, + wm9081->mclk_rate, new_sysclk); + if (ret == 0) { + wm9081->sysclk_rate = new_sysclk; + + /* Switch SYSCLK over to FLL */ + fll = 1; + } else { + wm9081->sysclk_rate = wm9081->mclk_rate; + } + break; + + default: + return -EINVAL; + } + + reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_1); + if (mclkdiv) + reg |= WM9081_MCLKDIV2; + else + reg &= ~WM9081_MCLKDIV2; + wm9081_write(codec, WM9081_CLOCK_CONTROL_1, reg); + + reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3); + if (fll) + reg |= WM9081_CLK_SRC_SEL; + else + reg &= ~WM9081_CLK_SRC_SEL; + wm9081_write(codec, WM9081_CLOCK_CONTROL_3, reg); + + dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate); + + return ret; +} + +static int clk_sys_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm9081_priv *wm9081 = codec->private_data; + + /* This should be done on init() for bypass paths */ + switch (wm9081->sysclk_source) { + case WM9081_SYSCLK_MCLK: + dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate); + break; + case WM9081_SYSCLK_FLL_MCLK: + dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n", + wm9081->mclk_rate); + break; + default: + dev_err(codec->dev, "System clock not configured\n"); + return -EINVAL; + } + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + configure_clock(codec); + break; + + case SND_SOC_DAPM_POST_PMD: + /* Disable the FLL if it's running */ + wm9081_set_fll(codec, 0, 0, 0); + break; + } + + return 0; +} + +static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("IN1"), +SND_SOC_DAPM_INPUT("IN2"), + +SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0), + +SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0, + mixer, ARRAY_SIZE(mixer)), + +SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0), + +SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0, + speaker_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_OUTPUT("LINEOUT"), +SND_SOC_DAPM_OUTPUT("SPKN"), +SND_SOC_DAPM_OUTPUT("SPKP"), + +SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0), +}; + + +static const struct snd_soc_dapm_route audio_paths[] = { + { "DAC", NULL, "CLK_SYS" }, + { "DAC", NULL, "CLK_DSP" }, + + { "Mixer", "IN1 Switch", "IN1" }, + { "Mixer", "IN2 Switch", "IN2" }, + { "Mixer", "Playback Switch", "DAC" }, + + { "LINEOUT PGA", NULL, "Mixer" }, + { "LINEOUT PGA", NULL, "TOCLK" }, + { "LINEOUT PGA", NULL, "CLK_SYS" }, + + { "LINEOUT", NULL, "LINEOUT PGA" }, + + { "Speaker PGA", NULL, "Mixer" }, + { "Speaker PGA", NULL, "TOCLK" }, + { "Speaker PGA", NULL, "CLK_SYS" }, + + { "SPKN", NULL, "Speaker PGA" }, + { "SPKP", NULL, "Speaker PGA" }, +}; + +static int wm9081_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 reg; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + /* VMID=2*40k */ + reg = wm9081_read(codec, WM9081_VMID_CONTROL); + reg &= ~WM9081_VMID_SEL_MASK; + reg |= 0x2; + wm9081_write(codec, WM9081_VMID_CONTROL, reg); + + /* Normal bias current */ + reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); + reg &= ~WM9081_STBY_BIAS_ENA; + wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); + break; + + case SND_SOC_BIAS_STANDBY: + /* Initial cold start */ + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Disable LINEOUT discharge */ + reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL); + reg &= ~WM9081_LINEOUT_DISCH; + wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg); + + /* Select startup bias source */ + reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); + reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA; + wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); + + /* VMID 2*4k; Soft VMID ramp enable */ + reg = wm9081_read(codec, WM9081_VMID_CONTROL); + reg |= WM9081_VMID_RAMP | 0x6; + wm9081_write(codec, WM9081_VMID_CONTROL, reg); + + mdelay(100); + + /* Normal bias enable & soft start off */ + reg |= WM9081_BIAS_ENA; + reg &= ~WM9081_VMID_RAMP; + wm9081_write(codec, WM9081_VMID_CONTROL, reg); + + /* Standard bias source */ + reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); + reg &= ~WM9081_BIAS_SRC; + wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); + } + + /* VMID 2*240k */ + reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); + reg &= ~WM9081_VMID_SEL_MASK; + reg |= 0x40; + wm9081_write(codec, WM9081_VMID_CONTROL, reg); + + /* Standby bias current on */ + reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); + reg |= WM9081_STBY_BIAS_ENA; + wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); + break; + + case SND_SOC_BIAS_OFF: + /* Startup bias source */ + reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); + reg |= WM9081_BIAS_SRC; + wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); + + /* Disable VMID and biases with soft ramping */ + reg = wm9081_read(codec, WM9081_VMID_CONTROL); + reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA); + reg |= WM9081_VMID_RAMP; + wm9081_write(codec, WM9081_VMID_CONTROL, reg); + + /* Actively discharge LINEOUT */ + reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL); + reg |= WM9081_LINEOUT_DISCH; + wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg); + break; + } + + codec->bias_level = level; + + return 0; +} + +static int wm9081_set_dai_fmt(struct snd_soc_dai *dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm9081_priv *wm9081 = codec->private_data; + unsigned int aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2); + + aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV | + WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + wm9081->master = 0; + break; + case SND_SOC_DAIFMT_CBS_CFM: + aif2 |= WM9081_LRCLK_DIR; + wm9081->master = 1; + break; + case SND_SOC_DAIFMT_CBM_CFS: + aif2 |= WM9081_BCLK_DIR; + wm9081->master = 1; + break; + case SND_SOC_DAIFMT_CBM_CFM: + aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR; + wm9081->master = 1; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_B: + aif2 |= WM9081_AIF_LRCLK_INV; + case SND_SOC_DAIFMT_DSP_A: + aif2 |= 0x3; + break; + case SND_SOC_DAIFMT_I2S: + aif2 |= 0x2; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + aif2 |= 0x1; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + /* frame inversion not valid for DSP modes */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + aif2 |= WM9081_AIF_BCLK_INV; + break; + default: + return -EINVAL; + } + break; + + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV; + break; + case SND_SOC_DAIFMT_IB_NF: + aif2 |= WM9081_AIF_BCLK_INV; + break; + case SND_SOC_DAIFMT_NB_IF: + aif2 |= WM9081_AIF_LRCLK_INV; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); + + return 0; +} + +static int wm9081_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm9081_priv *wm9081 = codec->private_data; + int ret, i, best, best_val, cur_val; + unsigned int clk_ctrl2, aif1, aif2, aif3, aif4; + + clk_ctrl2 = wm9081_read(codec, WM9081_CLOCK_CONTROL_2); + clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK); + + aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1); + + aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2); + aif2 &= ~WM9081_AIF_WL_MASK; + + aif3 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_3); + aif3 &= ~WM9081_BCLK_DIV_MASK; + + aif4 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_4); + aif4 &= ~WM9081_LRCLK_RATE_MASK; + + /* What BCLK do we need? */ + wm9081->fs = params_rate(params); + wm9081->bclk = 2 * wm9081->fs; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + wm9081->bclk *= 16; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + wm9081->bclk *= 20; + aif2 |= 0x4; + break; + case SNDRV_PCM_FORMAT_S24_LE: + wm9081->bclk *= 24; + aif2 |= 0x8; + break; + case SNDRV_PCM_FORMAT_S32_LE: + wm9081->bclk *= 32; + aif2 |= 0xc; + break; + default: + return -EINVAL; + } + + if (aif1 & WM9081_AIFDAC_TDM_MODE_MASK) { + int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >> + WM9081_AIFDAC_TDM_MODE_SHIFT) + 1; + wm9081->bclk *= slots; + } + + dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk); + + ret = configure_clock(codec); + if (ret != 0) + return ret; + + /* Select nearest CLK_SYS_RATE */ + best = 0; + best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio) + - wm9081->fs); + for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) { + cur_val = abs((wm9081->sysclk_rate / + clk_sys_rates[i].ratio) - wm9081->fs);; + if (cur_val < best_val) { + best = i; + best_val = cur_val; + } + } + dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n", + clk_sys_rates[best].ratio); + clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate + << WM9081_CLK_SYS_RATE_SHIFT); + + /* SAMPLE_RATE */ + best = 0; + best_val = abs(wm9081->fs - sample_rates[0].rate); + for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { + /* Closest match */ + cur_val = abs(wm9081->fs - sample_rates[i].rate); + if (cur_val < best_val) { + best = i; + best_val = cur_val; + } + } + dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n", + sample_rates[best].rate); + clk_ctrl2 |= (sample_rates[best].sample_rate + << WM9081_SAMPLE_RATE_SHIFT); + + /* BCLK_DIV */ + best = 0; + best_val = INT_MAX; + for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { + cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div) + - wm9081->bclk; + if (cur_val < 0) /* Table is sorted */ + break; + if (cur_val < best_val) { + best = i; + best_val = cur_val; + } + } + wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div; + dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n", + bclk_divs[best].div, wm9081->bclk); + aif3 |= bclk_divs[best].bclk_div; + + /* LRCLK is a simple fraction of BCLK */ + dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs); + aif4 |= wm9081->bclk / wm9081->fs; + + /* Apply a ReTune Mobile configuration if it's in use */ + if (wm9081->retune) { + struct wm9081_retune_mobile_config *retune = wm9081->retune; + struct wm9081_retune_mobile_setting *s; + int eq1; + + best = 0; + best_val = abs(retune->configs[0].rate - wm9081->fs); + for (i = 0; i < retune->num_configs; i++) { + cur_val = abs(retune->configs[i].rate - wm9081->fs); + if (cur_val < best_val) { + best_val = cur_val; + best = i; + } + } + s = &retune->configs[best]; + + dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n", + s->name, s->rate); + + /* If the EQ is enabled then disable it while we write out */ + eq1 = wm9081_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA; + if (eq1 & WM9081_EQ_ENA) + wm9081_write(codec, WM9081_EQ_1, 0); + + /* Write out the other values */ + for (i = 1; i < ARRAY_SIZE(s->config); i++) + wm9081_write(codec, WM9081_EQ_1 + i, s->config[i]); + + eq1 |= (s->config[0] & ~WM9081_EQ_ENA); + wm9081_write(codec, WM9081_EQ_1, eq1); + } + + wm9081_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2); + wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); + wm9081_write(codec, WM9081_AUDIO_INTERFACE_3, aif3); + wm9081_write(codec, WM9081_AUDIO_INTERFACE_4, aif4); + + return 0; +} + +static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + unsigned int reg; + + reg = wm9081_read(codec, WM9081_DAC_DIGITAL_2); + + if (mute) + reg |= WM9081_DAC_MUTE; + else + reg &= ~WM9081_DAC_MUTE; + + wm9081_write(codec, WM9081_DAC_DIGITAL_2, reg); + + return 0; +} + +static int wm9081_set_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm9081_priv *wm9081 = codec->private_data; + + switch (clk_id) { + case WM9081_SYSCLK_MCLK: + case WM9081_SYSCLK_FLL_MCLK: + wm9081->sysclk_source = clk_id; + wm9081->mclk_rate = freq; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int wm9081_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int mask, int slots) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned int aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1); + + aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK); + + if (slots < 1 || slots > 4) + return -EINVAL; + + aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT; + + switch (mask) { + case 1: + break; + case 2: + aif1 |= 0x10; + break; + case 4: + aif1 |= 0x20; + break; + case 8: + aif1 |= 0x30; + break; + default: + return -EINVAL; + } + + wm9081_write(codec, WM9081_AUDIO_INTERFACE_1, aif1); + + return 0; +} + +#define WM9081_RATES SNDRV_PCM_RATE_8000_96000 + +#define WM9081_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm9081_dai_ops = { + .hw_params = wm9081_hw_params, + .set_sysclk = wm9081_set_sysclk, + .set_fmt = wm9081_set_dai_fmt, + .digital_mute = wm9081_digital_mute, + .set_tdm_slot = wm9081_set_tdm_slot, +}; + +/* We report two channels because the CODEC processes a stereo signal, even + * though it is only capable of handling a mono output. + */ +struct snd_soc_dai wm9081_dai = { + .name = "WM9081", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM9081_RATES, + .formats = WM9081_FORMATS, + }, + .ops = &wm9081_dai_ops, +}; +EXPORT_SYMBOL_GPL(wm9081_dai); + + +static struct snd_soc_codec *wm9081_codec; + +static int wm9081_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + struct wm9081_priv *wm9081; + int ret = 0; + + if (wm9081_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = wm9081_codec; + codec = wm9081_codec; + wm9081 = codec->private_data; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + snd_soc_add_controls(codec, wm9081_snd_controls, + ARRAY_SIZE(wm9081_snd_controls)); + if (!wm9081->retune) { + dev_dbg(codec->dev, + "No ReTune Mobile data, using normal EQ\n"); + snd_soc_add_controls(codec, wm9081_eq_controls, + ARRAY_SIZE(wm9081_eq_controls)); + } + + snd_soc_dapm_new_controls(codec, wm9081_dapm_widgets, + ARRAY_SIZE(wm9081_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths)); + snd_soc_dapm_new_widgets(codec); + + ret = snd_soc_init_card(socdev); + if (ret < 0) { + dev_err(codec->dev, "failed to register card: %d\n", ret); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + return ret; +} + +static int wm9081_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +#ifdef CONFIG_PM +static int wm9081_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int wm9081_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + u16 *reg_cache = codec->reg_cache; + int i; + + for (i = 0; i < codec->reg_cache_size; i++) { + if (i == WM9081_SOFTWARE_RESET) + continue; + + wm9081_write(codec, i, reg_cache[i]); + } + + wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + return 0; +} +#else +#define wm9081_suspend NULL +#define wm9081_resume NULL +#endif + +struct snd_soc_codec_device soc_codec_dev_wm9081 = { + .probe = wm9081_probe, + .remove = wm9081_remove, + .suspend = wm9081_suspend, + .resume = wm9081_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081); + +static int wm9081_register(struct wm9081_priv *wm9081) +{ + struct snd_soc_codec *codec = &wm9081->codec; + int ret; + u16 reg; + + if (wm9081_codec) { + dev_err(codec->dev, "Another WM9081 is registered\n"); + ret = -EINVAL; + goto err; + } + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->private_data = wm9081; + codec->name = "WM9081"; + codec->owner = THIS_MODULE; + codec->read = wm9081_read; + codec->write = wm9081_write; + codec->dai = &wm9081_dai; + codec->num_dai = 1; + codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache); + codec->reg_cache = &wm9081->reg_cache; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = wm9081_set_bias_level; + + memcpy(codec->reg_cache, wm9081_reg_defaults, + sizeof(wm9081_reg_defaults)); + + reg = wm9081_read_hw(codec, WM9081_SOFTWARE_RESET); + if (reg != 0x9081) { + dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg); + ret = -EINVAL; + goto err; + } + + ret = wm9081_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + return ret; + } + + wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Enable zero cross by default */ + reg = wm9081_read(codec, WM9081_ANALOGUE_LINEOUT); + wm9081_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC); + reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_PGA); + wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_PGA, + reg | WM9081_SPKPGAZC); + + wm9081_dai.dev = codec->dev; + + wm9081_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm9081_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + return 0; + +err: + kfree(wm9081); + return ret; +} + +static void wm9081_unregister(struct wm9081_priv *wm9081) +{ + wm9081_set_bias_level(&wm9081->codec, SND_SOC_BIAS_OFF); + snd_soc_unregister_dai(&wm9081_dai); + snd_soc_unregister_codec(&wm9081->codec); + kfree(wm9081); + wm9081_codec = NULL; +} + +static __devinit int wm9081_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm9081_priv *wm9081; + struct snd_soc_codec *codec; + + wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL); + if (wm9081 == NULL) + return -ENOMEM; + + codec = &wm9081->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + wm9081->retune = i2c->dev.platform_data; + + i2c_set_clientdata(i2c, wm9081); + codec->control_data = i2c; + + codec->dev = &i2c->dev; + + return wm9081_register(wm9081); +} + +static __devexit int wm9081_i2c_remove(struct i2c_client *client) +{ + struct wm9081_priv *wm9081 = i2c_get_clientdata(client); + wm9081_unregister(wm9081); + return 0; +} + +static const struct i2c_device_id wm9081_i2c_id[] = { + { "wm9081", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id); + +static struct i2c_driver wm9081_i2c_driver = { + .driver = { + .name = "wm9081", + .owner = THIS_MODULE, + }, + .probe = wm9081_i2c_probe, + .remove = __devexit_p(wm9081_i2c_remove), + .id_table = wm9081_i2c_id, +}; + +static int __init wm9081_modinit(void) +{ + int ret; + + ret = i2c_add_driver(&wm9081_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n", + ret); + } + + return ret; +} +module_init(wm9081_modinit); + +static void __exit wm9081_exit(void) +{ + i2c_del_driver(&wm9081_i2c_driver); +} +module_exit(wm9081_exit); + + +MODULE_DESCRIPTION("ASoC WM9081 driver"); +MODULE_AUTHOR("Mark Brown "); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm9081.h b/sound/soc/codecs/wm9081.h new file mode 100644 index 0000000..42d3bc7 --- /dev/null +++ b/sound/soc/codecs/wm9081.h @@ -0,0 +1,787 @@ +#ifndef WM9081_H +#define WM9081_H + +/* + * wm9081.c -- WM9081 ALSA SoC Audio driver + * + * Author: Mark Brown + * + * Copyright 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +extern struct snd_soc_dai wm9081_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm9081; + +/* + * SYSCLK sources + */ +#define WM9081_SYSCLK_MCLK 1 /* Use MCLK without FLL */ +#define WM9081_SYSCLK_FLL_MCLK 2 /* Use MCLK, enabling FLL if required */ + +/* + * Register values. + */ +#define WM9081_SOFTWARE_RESET 0x00 +#define WM9081_ANALOGUE_LINEOUT 0x02 +#define WM9081_ANALOGUE_SPEAKER_PGA 0x03 +#define WM9081_VMID_CONTROL 0x04 +#define WM9081_BIAS_CONTROL_1 0x05 +#define WM9081_ANALOGUE_MIXER 0x07 +#define WM9081_ANTI_POP_CONTROL 0x08 +#define WM9081_ANALOGUE_SPEAKER_1 0x09 +#define WM9081_ANALOGUE_SPEAKER_2 0x0A +#define WM9081_POWER_MANAGEMENT 0x0B +#define WM9081_CLOCK_CONTROL_1 0x0C +#define WM9081_CLOCK_CONTROL_2 0x0D +#define WM9081_CLOCK_CONTROL_3 0x0E +#define WM9081_FLL_CONTROL_1 0x10 +#define WM9081_FLL_CONTROL_2 0x11 +#define WM9081_FLL_CONTROL_3 0x12 +#define WM9081_FLL_CONTROL_4 0x13 +#define WM9081_FLL_CONTROL_5 0x14 +#define WM9081_AUDIO_INTERFACE_1 0x16 +#define WM9081_AUDIO_INTERFACE_2 0x17 +#define WM9081_AUDIO_INTERFACE_3 0x18 +#define WM9081_AUDIO_INTERFACE_4 0x19 +#define WM9081_INTERRUPT_STATUS 0x1A +#define WM9081_INTERRUPT_STATUS_MASK 0x1B +#define WM9081_INTERRUPT_POLARITY 0x1C +#define WM9081_INTERRUPT_CONTROL 0x1D +#define WM9081_DAC_DIGITAL_1 0x1E +#define WM9081_DAC_DIGITAL_2 0x1F +#define WM9081_DRC_1 0x20 +#define WM9081_DRC_2 0x21 +#define WM9081_DRC_3 0x22 +#define WM9081_DRC_4 0x23 +#define WM9081_WRITE_SEQUENCER_1 0x26 +#define WM9081_WRITE_SEQUENCER_2 0x27 +#define WM9081_MW_SLAVE_1 0x28 +#define WM9081_EQ_1 0x2A +#define WM9081_EQ_2 0x2B +#define WM9081_EQ_3 0x2C +#define WM9081_EQ_4 0x2D +#define WM9081_EQ_5 0x2E +#define WM9081_EQ_6 0x2F +#define WM9081_EQ_7 0x30 +#define WM9081_EQ_8 0x31 +#define WM9081_EQ_9 0x32 +#define WM9081_EQ_10 0x33 +#define WM9081_EQ_11 0x34 +#define WM9081_EQ_12 0x35 +#define WM9081_EQ_13 0x36 +#define WM9081_EQ_14 0x37 +#define WM9081_EQ_15 0x38 +#define WM9081_EQ_16 0x39 +#define WM9081_EQ_17 0x3A +#define WM9081_EQ_18 0x3B +#define WM9081_EQ_19 0x3C +#define WM9081_EQ_20 0x3D + +#define WM9081_REGISTER_COUNT 55 +#define WM9081_MAX_REGISTER 0x3D + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - Software Reset + */ +#define WM9081_SW_RST_DEV_ID1_MASK 0xFFFF /* SW_RST_DEV_ID1 - [15:0] */ +#define WM9081_SW_RST_DEV_ID1_SHIFT 0 /* SW_RST_DEV_ID1 - [15:0] */ +#define WM9081_SW_RST_DEV_ID1_WIDTH 16 /* SW_RST_DEV_ID1 - [15:0] */ + +/* + * R2 (0x02) - Analogue Lineout + */ +#define WM9081_LINEOUT_MUTE 0x0080 /* LINEOUT_MUTE */ +#define WM9081_LINEOUT_MUTE_MASK 0x0080 /* LINEOUT_MUTE */ +#define WM9081_LINEOUT_MUTE_SHIFT 7 /* LINEOUT_MUTE */ +#define WM9081_LINEOUT_MUTE_WIDTH 1 /* LINEOUT_MUTE */ +#define WM9081_LINEOUTZC 0x0040 /* LINEOUTZC */ +#define WM9081_LINEOUTZC_MASK 0x0040 /* LINEOUTZC */ +#define WM9081_LINEOUTZC_SHIFT 6 /* LINEOUTZC */ +#define WM9081_LINEOUTZC_WIDTH 1 /* LINEOUTZC */ +#define WM9081_LINEOUT_VOL_MASK 0x003F /* LINEOUT_VOL - [5:0] */ +#define WM9081_LINEOUT_VOL_SHIFT 0 /* LINEOUT_VOL - [5:0] */ +#define WM9081_LINEOUT_VOL_WIDTH 6 /* LINEOUT_VOL - [5:0] */ + +/* + * R3 (0x03) - Analogue Speaker PGA + */ +#define WM9081_SPKPGA_MUTE 0x0080 /* SPKPGA_MUTE */ +#define WM9081_SPKPGA_MUTE_MASK 0x0080 /* SPKPGA_MUTE */ +#define WM9081_SPKPGA_MUTE_SHIFT 7 /* SPKPGA_MUTE */ +#define WM9081_SPKPGA_MUTE_WIDTH 1 /* SPKPGA_MUTE */ +#define WM9081_SPKPGAZC 0x0040 /* SPKPGAZC */ +#define WM9081_SPKPGAZC_MASK 0x0040 /* SPKPGAZC */ +#define WM9081_SPKPGAZC_SHIFT 6 /* SPKPGAZC */ +#define WM9081_SPKPGAZC_WIDTH 1 /* SPKPGAZC */ +#define WM9081_SPKPGA_VOL_MASK 0x003F /* SPKPGA_VOL - [5:0] */ +#define WM9081_SPKPGA_VOL_SHIFT 0 /* SPKPGA_VOL - [5:0] */ +#define WM9081_SPKPGA_VOL_WIDTH 6 /* SPKPGA_VOL - [5:0] */ + +/* + * R4 (0x04) - VMID Control + */ +#define WM9081_VMID_BUF_ENA 0x0020 /* VMID_BUF_ENA */ +#define WM9081_VMID_BUF_ENA_MASK 0x0020 /* VMID_BUF_ENA */ +#define WM9081_VMID_BUF_ENA_SHIFT 5 /* VMID_BUF_ENA */ +#define WM9081_VMID_BUF_ENA_WIDTH 1 /* VMID_BUF_ENA */ +#define WM9081_VMID_RAMP 0x0008 /* VMID_RAMP */ +#define WM9081_VMID_RAMP_MASK 0x0008 /* VMID_RAMP */ +#define WM9081_VMID_RAMP_SHIFT 3 /* VMID_RAMP */ +#define WM9081_VMID_RAMP_WIDTH 1 /* VMID_RAMP */ +#define WM9081_VMID_SEL_MASK 0x0006 /* VMID_SEL - [2:1] */ +#define WM9081_VMID_SEL_SHIFT 1 /* VMID_SEL - [2:1] */ +#define WM9081_VMID_SEL_WIDTH 2 /* VMID_SEL - [2:1] */ +#define WM9081_VMID_FAST_ST 0x0001 /* VMID_FAST_ST */ +#define WM9081_VMID_FAST_ST_MASK 0x0001 /* VMID_FAST_ST */ +#define WM9081_VMID_FAST_ST_SHIFT 0 /* VMID_FAST_ST */ +#define WM9081_VMID_FAST_ST_WIDTH 1 /* VMID_FAST_ST */ + +/* + * R5 (0x05) - Bias Control 1 + */ +#define WM9081_BIAS_SRC 0x0040 /* BIAS_SRC */ +#define WM9081_BIAS_SRC_MASK 0x0040 /* BIAS_SRC */ +#define WM9081_BIAS_SRC_SHIFT 6 /* BIAS_SRC */ +#define WM9081_BIAS_SRC_WIDTH 1 /* BIAS_SRC */ +#define WM9081_STBY_BIAS_LVL 0x0020 /* STBY_BIAS_LVL */ +#define WM9081_STBY_BIAS_LVL_MASK 0x0020 /* STBY_BIAS_LVL */ +#define WM9081_STBY_BIAS_LVL_SHIFT 5 /* STBY_BIAS_LVL */ +#define WM9081_STBY_BIAS_LVL_WIDTH 1 /* STBY_BIAS_LVL */ +#define WM9081_STBY_BIAS_ENA 0x0010 /* STBY_BIAS_ENA */ +#define WM9081_STBY_BIAS_ENA_MASK 0x0010 /* STBY_BIAS_ENA */ +#define WM9081_STBY_BIAS_ENA_SHIFT 4 /* STBY_BIAS_ENA */ +#define WM9081_STBY_BIAS_ENA_WIDTH 1 /* STBY_BIAS_ENA */ +#define WM9081_BIAS_LVL_MASK 0x000C /* BIAS_LVL - [3:2] */ +#define WM9081_BIAS_LVL_SHIFT 2 /* BIAS_LVL - [3:2] */ +#define WM9081_BIAS_LVL_WIDTH 2 /* BIAS_LVL - [3:2] */ +#define WM9081_BIAS_ENA 0x0002 /* BIAS_ENA */ +#define WM9081_BIAS_ENA_MASK 0x0002 /* BIAS_ENA */ +#define WM9081_BIAS_ENA_SHIFT 1 /* BIAS_ENA */ +#define WM9081_BIAS_ENA_WIDTH 1 /* BIAS_ENA */ +#define WM9081_STARTUP_BIAS_ENA 0x0001 /* STARTUP_BIAS_ENA */ +#define WM9081_STARTUP_BIAS_ENA_MASK 0x0001 /* STARTUP_BIAS_ENA */ +#define WM9081_STARTUP_BIAS_ENA_SHIFT 0 /* STARTUP_BIAS_ENA */ +#define WM9081_STARTUP_BIAS_ENA_WIDTH 1 /* STARTUP_BIAS_ENA */ + +/* + * R7 (0x07) - Analogue Mixer + */ +#define WM9081_DAC_SEL 0x0010 /* DAC_SEL */ +#define WM9081_DAC_SEL_MASK 0x0010 /* DAC_SEL */ +#define WM9081_DAC_SEL_SHIFT 4 /* DAC_SEL */ +#define WM9081_DAC_SEL_WIDTH 1 /* DAC_SEL */ +#define WM9081_IN2_VOL 0x0008 /* IN2_VOL */ +#define WM9081_IN2_VOL_MASK 0x0008 /* IN2_VOL */ +#define WM9081_IN2_VOL_SHIFT 3 /* IN2_VOL */ +#define WM9081_IN2_VOL_WIDTH 1 /* IN2_VOL */ +#define WM9081_IN2_ENA 0x0004 /* IN2_ENA */ +#define WM9081_IN2_ENA_MASK 0x0004 /* IN2_ENA */ +#define WM9081_IN2_ENA_SHIFT 2 /* IN2_ENA */ +#define WM9081_IN2_ENA_WIDTH 1 /* IN2_ENA */ +#define WM9081_IN1_VOL 0x0002 /* IN1_VOL */ +#define WM9081_IN1_VOL_MASK 0x0002 /* IN1_VOL */ +#define WM9081_IN1_VOL_SHIFT 1 /* IN1_VOL */ +#define WM9081_IN1_VOL_WIDTH 1 /* IN1_VOL */ +#define WM9081_IN1_ENA 0x0001 /* IN1_ENA */ +#define WM9081_IN1_ENA_MASK 0x0001 /* IN1_ENA */ +#define WM9081_IN1_ENA_SHIFT 0 /* IN1_ENA */ +#define WM9081_IN1_ENA_WIDTH 1 /* IN1_ENA */ + +/* + * R8 (0x08) - Anti Pop Control + */ +#define WM9081_LINEOUT_DISCH 0x0004 /* LINEOUT_DISCH */ +#define WM9081_LINEOUT_DISCH_MASK 0x0004 /* LINEOUT_DISCH */ +#define WM9081_LINEOUT_DISCH_SHIFT 2 /* LINEOUT_DISCH */ +#define WM9081_LINEOUT_DISCH_WIDTH 1 /* LINEOUT_DISCH */ +#define WM9081_LINEOUT_VROI 0x0002 /* LINEOUT_VROI */ +#define WM9081_LINEOUT_VROI_MASK 0x0002 /* LINEOUT_VROI */ +#define WM9081_LINEOUT_VROI_SHIFT 1 /* LINEOUT_VROI */ +#define WM9081_LINEOUT_VROI_WIDTH 1 /* LINEOUT_VROI */ +#define WM9081_LINEOUT_CLAMP 0x0001 /* LINEOUT_CLAMP */ +#define WM9081_LINEOUT_CLAMP_MASK 0x0001 /* LINEOUT_CLAMP */ +#define WM9081_LINEOUT_CLAMP_SHIFT 0 /* LINEOUT_CLAMP */ +#define WM9081_LINEOUT_CLAMP_WIDTH 1 /* LINEOUT_CLAMP */ + +/* + * R9 (0x09) - Analogue Speaker 1 + */ +#define WM9081_SPK_DCGAIN_MASK 0x0038 /* SPK_DCGAIN - [5:3] */ +#define WM9081_SPK_DCGAIN_SHIFT 3 /* SPK_DCGAIN - [5:3] */ +#define WM9081_SPK_DCGAIN_WIDTH 3 /* SPK_DCGAIN - [5:3] */ +#define WM9081_SPK_ACGAIN_MASK 0x0007 /* SPK_ACGAIN - [2:0] */ +#define WM9081_SPK_ACGAIN_SHIFT 0 /* SPK_ACGAIN - [2:0] */ +#define WM9081_SPK_ACGAIN_WIDTH 3 /* SPK_ACGAIN - [2:0] */ + +/* + * R10 (0x0A) - Analogue Speaker 2 + */ +#define WM9081_SPK_MODE 0x0040 /* SPK_MODE */ +#define WM9081_SPK_MODE_MASK 0x0040 /* SPK_MODE */ +#define WM9081_SPK_MODE_SHIFT 6 /* SPK_MODE */ +#define WM9081_SPK_MODE_WIDTH 1 /* SPK_MODE */ +#define WM9081_SPK_INV_MUTE 0x0010 /* SPK_INV_MUTE */ +#define WM9081_SPK_INV_MUTE_MASK 0x0010 /* SPK_INV_MUTE */ +#define WM9081_SPK_INV_MUTE_SHIFT 4 /* SPK_INV_MUTE */ +#define WM9081_SPK_INV_MUTE_WIDTH 1 /* SPK_INV_MUTE */ +#define WM9081_OUT_SPK_CTRL 0x0008 /* OUT_SPK_CTRL */ +#define WM9081_OUT_SPK_CTRL_MASK 0x0008 /* OUT_SPK_CTRL */ +#define WM9081_OUT_SPK_CTRL_SHIFT 3 /* OUT_SPK_CTRL */ +#define WM9081_OUT_SPK_CTRL_WIDTH 1 /* OUT_SPK_CTRL */ + +/* + * R11 (0x0B) - Power Management + */ +#define WM9081_TSHUT_ENA 0x0100 /* TSHUT_ENA */ +#define WM9081_TSHUT_ENA_MASK 0x0100 /* TSHUT_ENA */ +#define WM9081_TSHUT_ENA_SHIFT 8 /* TSHUT_ENA */ +#define WM9081_TSHUT_ENA_WIDTH 1 /* TSHUT_ENA */ +#define WM9081_TSENSE_ENA 0x0080 /* TSENSE_ENA */ +#define WM9081_TSENSE_ENA_MASK 0x0080 /* TSENSE_ENA */ +#define WM9081_TSENSE_ENA_SHIFT 7 /* TSENSE_ENA */ +#define WM9081_TSENSE_ENA_WIDTH 1 /* TSENSE_ENA */ +#define WM9081_TEMP_SHUT 0x0040 /* TEMP_SHUT */ +#define WM9081_TEMP_SHUT_MASK 0x0040 /* TEMP_SHUT */ +#define WM9081_TEMP_SHUT_SHIFT 6 /* TEMP_SHUT */ +#define WM9081_TEMP_SHUT_WIDTH 1 /* TEMP_SHUT */ +#define WM9081_LINEOUT_ENA 0x0010 /* LINEOUT_ENA */ +#define WM9081_LINEOUT_ENA_MASK 0x0010 /* LINEOUT_ENA */ +#define WM9081_LINEOUT_ENA_SHIFT 4 /* LINEOUT_ENA */ +#define WM9081_LINEOUT_ENA_WIDTH 1 /* LINEOUT_ENA */ +#define WM9081_SPKPGA_ENA 0x0004 /* SPKPGA_ENA */ +#define WM9081_SPKPGA_ENA_MASK 0x0004 /* SPKPGA_ENA */ +#define WM9081_SPKPGA_ENA_SHIFT 2 /* SPKPGA_ENA */ +#define WM9081_SPKPGA_ENA_WIDTH 1 /* SPKPGA_ENA */ +#define WM9081_SPK_ENA 0x0002 /* SPK_ENA */ +#define WM9081_SPK_ENA_MASK 0x0002 /* SPK_ENA */ +#define WM9081_SPK_ENA_SHIFT 1 /* SPK_ENA */ +#define WM9081_SPK_ENA_WIDTH 1 /* SPK_ENA */ +#define WM9081_DAC_ENA 0x0001 /* DAC_ENA */ +#define WM9081_DAC_ENA_MASK 0x0001 /* DAC_ENA */ +#define WM9081_DAC_ENA_SHIFT 0 /* DAC_ENA */ +#define WM9081_DAC_ENA_WIDTH 1 /* DAC_ENA */ + +/* + * R12 (0x0C) - Clock Control 1 + */ +#define WM9081_CLK_OP_DIV_MASK 0x1C00 /* CLK_OP_DIV - [12:10] */ +#define WM9081_CLK_OP_DIV_SHIFT 10 /* CLK_OP_DIV - [12:10] */ +#define WM9081_CLK_OP_DIV_WIDTH 3 /* CLK_OP_DIV - [12:10] */ +#define WM9081_CLK_TO_DIV_MASK 0x0300 /* CLK_TO_DIV - [9:8] */ +#define WM9081_CLK_TO_DIV_SHIFT 8 /* CLK_TO_DIV - [9:8] */ +#define WM9081_CLK_TO_DIV_WIDTH 2 /* CLK_TO_DIV - [9:8] */ +#define WM9081_MCLKDIV2 0x0080 /* MCLKDIV2 */ +#define WM9081_MCLKDIV2_MASK 0x0080 /* MCLKDIV2 */ +#define WM9081_MCLKDIV2_SHIFT 7 /* MCLKDIV2 */ +#define WM9081_MCLKDIV2_WIDTH 1 /* MCLKDIV2 */ + +/* + * R13 (0x0D) - Clock Control 2 + */ +#define WM9081_CLK_SYS_RATE_MASK 0x00F0 /* CLK_SYS_RATE - [7:4] */ +#define WM9081_CLK_SYS_RATE_SHIFT 4 /* CLK_SYS_RATE - [7:4] */ +#define WM9081_CLK_SYS_RATE_WIDTH 4 /* CLK_SYS_RATE - [7:4] */ +#define WM9081_SAMPLE_RATE_MASK 0x000F /* SAMPLE_RATE - [3:0] */ +#define WM9081_SAMPLE_RATE_SHIFT 0 /* SAMPLE_RATE - [3:0] */ +#define WM9081_SAMPLE_RATE_WIDTH 4 /* SAMPLE_RATE - [3:0] */ + +/* + * R14 (0x0E) - Clock Control 3 + */ +#define WM9081_CLK_SRC_SEL 0x2000 /* CLK_SRC_SEL */ +#define WM9081_CLK_SRC_SEL_MASK 0x2000 /* CLK_SRC_SEL */ +#define WM9081_CLK_SRC_SEL_SHIFT 13 /* CLK_SRC_SEL */ +#define WM9081_CLK_SRC_SEL_WIDTH 1 /* CLK_SRC_SEL */ +#define WM9081_CLK_OP_ENA 0x0020 /* CLK_OP_ENA */ +#define WM9081_CLK_OP_ENA_MASK 0x0020 /* CLK_OP_ENA */ +#define WM9081_CLK_OP_ENA_SHIFT 5 /* CLK_OP_ENA */ +#define WM9081_CLK_OP_ENA_WIDTH 1 /* CLK_OP_ENA */ +#define WM9081_CLK_TO_ENA 0x0004 /* CLK_TO_ENA */ +#define WM9081_CLK_TO_ENA_MASK 0x0004 /* CLK_TO_ENA */ +#define WM9081_CLK_TO_ENA_SHIFT 2 /* CLK_TO_ENA */ +#define WM9081_CLK_TO_ENA_WIDTH 1 /* CLK_TO_ENA */ +#define WM9081_CLK_DSP_ENA 0x0002 /* CLK_DSP_ENA */ +#define WM9081_CLK_DSP_ENA_MASK 0x0002 /* CLK_DSP_ENA */ +#define WM9081_CLK_DSP_ENA_SHIFT 1 /* CLK_DSP_ENA */ +#define WM9081_CLK_DSP_ENA_WIDTH 1 /* CLK_DSP_ENA */ +#define WM9081_CLK_SYS_ENA 0x0001 /* CLK_SYS_ENA */ +#define WM9081_CLK_SYS_ENA_MASK 0x0001 /* CLK_SYS_ENA */ +#define WM9081_CLK_SYS_ENA_SHIFT 0 /* CLK_SYS_ENA */ +#define WM9081_CLK_SYS_ENA_WIDTH 1 /* CLK_SYS_ENA */ + +/* + * R16 (0x10) - FLL Control 1 + */ +#define WM9081_FLL_HOLD 0x0008 /* FLL_HOLD */ +#define WM9081_FLL_HOLD_MASK 0x0008 /* FLL_HOLD */ +#define WM9081_FLL_HOLD_SHIFT 3 /* FLL_HOLD */ +#define WM9081_FLL_HOLD_WIDTH 1 /* FLL_HOLD */ +#define WM9081_FLL_FRAC 0x0004 /* FLL_FRAC */ +#define WM9081_FLL_FRAC_MASK 0x0004 /* FLL_FRAC */ +#define WM9081_FLL_FRAC_SHIFT 2 /* FLL_FRAC */ +#define WM9081_FLL_FRAC_WIDTH 1 /* FLL_FRAC */ +#define WM9081_FLL_ENA 0x0001 /* FLL_ENA */ +#define WM9081_FLL_ENA_MASK 0x0001 /* FLL_ENA */ +#define WM9081_FLL_ENA_SHIFT 0 /* FLL_ENA */ +#define WM9081_FLL_ENA_WIDTH 1 /* FLL_ENA */ + +/* + * R17 (0x11) - FLL Control 2 + */ +#define WM9081_FLL_OUTDIV_MASK 0x0700 /* FLL_OUTDIV - [10:8] */ +#define WM9081_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [10:8] */ +#define WM9081_FLL_OUTDIV_WIDTH 3 /* FLL_OUTDIV - [10:8] */ +#define WM9081_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */ +#define WM9081_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */ +#define WM9081_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */ +#define WM9081_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */ +#define WM9081_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */ +#define WM9081_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */ + +/* + * R18 (0x12) - FLL Control 3 + */ +#define WM9081_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */ +#define WM9081_FLL_K_SHIFT 0 /* FLL_K - [15:0] */ +#define WM9081_FLL_K_WIDTH 16 /* FLL_K - [15:0] */ + +/* + * R19 (0x13) - FLL Control 4 + */ +#define WM9081_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */ +#define WM9081_FLL_N_SHIFT 5 /* FLL_N - [14:5] */ +#define WM9081_FLL_N_WIDTH 10 /* FLL_N - [14:5] */ +#define WM9081_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */ +#define WM9081_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */ +#define WM9081_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */ + +/* + * R20 (0x14) - FLL Control 5 + */ +#define WM9081_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */ +#define WM9081_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */ +#define WM9081_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */ +#define WM9081_FLL_CLK_SRC_MASK 0x0003 /* FLL_CLK_SRC - [1:0] */ +#define WM9081_FLL_CLK_SRC_SHIFT 0 /* FLL_CLK_SRC - [1:0] */ +#define WM9081_FLL_CLK_SRC_WIDTH 2 /* FLL_CLK_SRC - [1:0] */ + +/* + * R22 (0x16) - Audio Interface 1 + */ +#define WM9081_AIFDAC_CHAN 0x0040 /* AIFDAC_CHAN */ +#define WM9081_AIFDAC_CHAN_MASK 0x0040 /* AIFDAC_CHAN */ +#define WM9081_AIFDAC_CHAN_SHIFT 6 /* AIFDAC_CHAN */ +#define WM9081_AIFDAC_CHAN_WIDTH 1 /* AIFDAC_CHAN */ +#define WM9081_AIFDAC_TDM_SLOT_MASK 0x0030 /* AIFDAC_TDM_SLOT - [5:4] */ +#define WM9081_AIFDAC_TDM_SLOT_SHIFT 4 /* AIFDAC_TDM_SLOT - [5:4] */ +#define WM9081_AIFDAC_TDM_SLOT_WIDTH 2 /* AIFDAC_TDM_SLOT - [5:4] */ +#define WM9081_AIFDAC_TDM_MODE_MASK 0x000C /* AIFDAC_TDM_MODE - [3:2] */ +#define WM9081_AIFDAC_TDM_MODE_SHIFT 2 /* AIFDAC_TDM_MODE - [3:2] */ +#define WM9081_AIFDAC_TDM_MODE_WIDTH 2 /* AIFDAC_TDM_MODE - [3:2] */ +#define WM9081_DAC_COMP 0x0002 /* DAC_COMP */ +#define WM9081_DAC_COMP_MASK 0x0002 /* DAC_COMP */ +#define WM9081_DAC_COMP_SHIFT 1 /* DAC_COMP */ +#define WM9081_DAC_COMP_WIDTH 1 /* DAC_COMP */ +#define WM9081_DAC_COMPMODE 0x0001 /* DAC_COMPMODE */ +#define WM9081_DAC_COMPMODE_MASK 0x0001 /* DAC_COMPMODE */ +#define WM9081_DAC_COMPMODE_SHIFT 0 /* DAC_COMPMODE */ +#define WM9081_DAC_COMPMODE_WIDTH 1 /* DAC_COMPMODE */ + +/* + * R23 (0x17) - Audio Interface 2 + */ +#define WM9081_AIF_TRIS 0x0200 /* AIF_TRIS */ +#define WM9081_AIF_TRIS_MASK 0x0200 /* AIF_TRIS */ +#define WM9081_AIF_TRIS_SHIFT 9 /* AIF_TRIS */ +#define WM9081_AIF_TRIS_WIDTH 1 /* AIF_TRIS */ +#define WM9081_DAC_DAT_INV 0x0100 /* DAC_DAT_INV */ +#define WM9081_DAC_DAT_INV_MASK 0x0100 /* DAC_DAT_INV */ +#define WM9081_DAC_DAT_INV_SHIFT 8 /* DAC_DAT_INV */ +#define WM9081_DAC_DAT_INV_WIDTH 1 /* DAC_DAT_INV */ +#define WM9081_AIF_BCLK_INV 0x0080 /* AIF_BCLK_INV */ +#define WM9081_AIF_BCLK_INV_MASK 0x0080 /* AIF_BCLK_INV */ +#define WM9081_AIF_BCLK_INV_SHIFT 7 /* AIF_BCLK_INV */ +#define WM9081_AIF_BCLK_INV_WIDTH 1 /* AIF_BCLK_INV */ +#define WM9081_BCLK_DIR 0x0040 /* BCLK_DIR */ +#define WM9081_BCLK_DIR_MASK 0x0040 /* BCLK_DIR */ +#define WM9081_BCLK_DIR_SHIFT 6 /* BCLK_DIR */ +#define WM9081_BCLK_DIR_WIDTH 1 /* BCLK_DIR */ +#define WM9081_LRCLK_DIR 0x0020 /* LRCLK_DIR */ +#define WM9081_LRCLK_DIR_MASK 0x0020 /* LRCLK_DIR */ +#define WM9081_LRCLK_DIR_SHIFT 5 /* LRCLK_DIR */ +#define WM9081_LRCLK_DIR_WIDTH 1 /* LRCLK_DIR */ +#define WM9081_AIF_LRCLK_INV 0x0010 /* AIF_LRCLK_INV */ +#define WM9081_AIF_LRCLK_INV_MASK 0x0010 /* AIF_LRCLK_INV */ +#define WM9081_AIF_LRCLK_INV_SHIFT 4 /* AIF_LRCLK_INV */ +#define WM9081_AIF_LRCLK_INV_WIDTH 1 /* AIF_LRCLK_INV */ +#define WM9081_AIF_WL_MASK 0x000C /* AIF_WL - [3:2] */ +#define WM9081_AIF_WL_SHIFT 2 /* AIF_WL - [3:2] */ +#define WM9081_AIF_WL_WIDTH 2 /* AIF_WL - [3:2] */ +#define WM9081_AIF_FMT_MASK 0x0003 /* AIF_FMT - [1:0] */ +#define WM9081_AIF_FMT_SHIFT 0 /* AIF_FMT - [1:0] */ +#define WM9081_AIF_FMT_WIDTH 2 /* AIF_FMT - [1:0] */ + +/* + * R24 (0x18) - Audio Interface 3 + */ +#define WM9081_BCLK_DIV_MASK 0x001F /* BCLK_DIV - [4:0] */ +#define WM9081_BCLK_DIV_SHIFT 0 /* BCLK_DIV - [4:0] */ +#define WM9081_BCLK_DIV_WIDTH 5 /* BCLK_DIV - [4:0] */ + +/* + * R25 (0x19) - Audio Interface 4 + */ +#define WM9081_LRCLK_RATE_MASK 0x07FF /* LRCLK_RATE - [10:0] */ +#define WM9081_LRCLK_RATE_SHIFT 0 /* LRCLK_RATE - [10:0] */ +#define WM9081_LRCLK_RATE_WIDTH 11 /* LRCLK_RATE - [10:0] */ + +/* + * R26 (0x1A) - Interrupt Status + */ +#define WM9081_WSEQ_BUSY_EINT 0x0004 /* WSEQ_BUSY_EINT */ +#define WM9081_WSEQ_BUSY_EINT_MASK 0x0004 /* WSEQ_BUSY_EINT */ +#define WM9081_WSEQ_BUSY_EINT_SHIFT 2 /* WSEQ_BUSY_EINT */ +#define WM9081_WSEQ_BUSY_EINT_WIDTH 1 /* WSEQ_BUSY_EINT */ +#define WM9081_TSHUT_EINT 0x0001 /* TSHUT_EINT */ +#define WM9081_TSHUT_EINT_MASK 0x0001 /* TSHUT_EINT */ +#define WM9081_TSHUT_EINT_SHIFT 0 /* TSHUT_EINT */ +#define WM9081_TSHUT_EINT_WIDTH 1 /* TSHUT_EINT */ + +/* + * R27 (0x1B) - Interrupt Status Mask + */ +#define WM9081_IM_WSEQ_BUSY_EINT 0x0004 /* IM_WSEQ_BUSY_EINT */ +#define WM9081_IM_WSEQ_BUSY_EINT_MASK 0x0004 /* IM_WSEQ_BUSY_EINT */ +#define WM9081_IM_WSEQ_BUSY_EINT_SHIFT 2 /* IM_WSEQ_BUSY_EINT */ +#define WM9081_IM_WSEQ_BUSY_EINT_WIDTH 1 /* IM_WSEQ_BUSY_EINT */ +#define WM9081_IM_TSHUT_EINT 0x0001 /* IM_TSHUT_EINT */ +#define WM9081_IM_TSHUT_EINT_MASK 0x0001 /* IM_TSHUT_EINT */ +#define WM9081_IM_TSHUT_EINT_SHIFT 0 /* IM_TSHUT_EINT */ +#define WM9081_IM_TSHUT_EINT_WIDTH 1 /* IM_TSHUT_EINT */ + +/* + * R28 (0x1C) - Interrupt Polarity + */ +#define WM9081_TSHUT_INV 0x0001 /* TSHUT_INV */ +#define WM9081_TSHUT_INV_MASK 0x0001 /* TSHUT_INV */ +#define WM9081_TSHUT_INV_SHIFT 0 /* TSHUT_INV */ +#define WM9081_TSHUT_INV_WIDTH 1 /* TSHUT_INV */ + +/* + * R29 (0x1D) - Interrupt Control + */ +#define WM9081_IRQ_POL 0x8000 /* IRQ_POL */ +#define WM9081_IRQ_POL_MASK 0x8000 /* IRQ_POL */ +#define WM9081_IRQ_POL_SHIFT 15 /* IRQ_POL */ +#define WM9081_IRQ_POL_WIDTH 1 /* IRQ_POL */ +#define WM9081_IRQ_OP_CTRL 0x0001 /* IRQ_OP_CTRL */ +#define WM9081_IRQ_OP_CTRL_MASK 0x0001 /* IRQ_OP_CTRL */ +#define WM9081_IRQ_OP_CTRL_SHIFT 0 /* IRQ_OP_CTRL */ +#define WM9081_IRQ_OP_CTRL_WIDTH 1 /* IRQ_OP_CTRL */ + +/* + * R30 (0x1E) - DAC Digital 1 + */ +#define WM9081_DAC_VOL_MASK 0x00FF /* DAC_VOL - [7:0] */ +#define WM9081_DAC_VOL_SHIFT 0 /* DAC_VOL - [7:0] */ +#define WM9081_DAC_VOL_WIDTH 8 /* DAC_VOL - [7:0] */ + +/* + * R31 (0x1F) - DAC Digital 2 + */ +#define WM9081_DAC_MUTERATE 0x0400 /* DAC_MUTERATE */ +#define WM9081_DAC_MUTERATE_MASK 0x0400 /* DAC_MUTERATE */ +#define WM9081_DAC_MUTERATE_SHIFT 10 /* DAC_MUTERATE */ +#define WM9081_DAC_MUTERATE_WIDTH 1 /* DAC_MUTERATE */ +#define WM9081_DAC_MUTEMODE 0x0200 /* DAC_MUTEMODE */ +#define WM9081_DAC_MUTEMODE_MASK 0x0200 /* DAC_MUTEMODE */ +#define WM9081_DAC_MUTEMODE_SHIFT 9 /* DAC_MUTEMODE */ +#define WM9081_DAC_MUTEMODE_WIDTH 1 /* DAC_MUTEMODE */ +#define WM9081_DAC_MUTE 0x0008 /* DAC_MUTE */ +#define WM9081_DAC_MUTE_MASK 0x0008 /* DAC_MUTE */ +#define WM9081_DAC_MUTE_SHIFT 3 /* DAC_MUTE */ +#define WM9081_DAC_MUTE_WIDTH 1 /* DAC_MUTE */ +#define WM9081_DEEMPH_MASK 0x0006 /* DEEMPH - [2:1] */ +#define WM9081_DEEMPH_SHIFT 1 /* DEEMPH - [2:1] */ +#define WM9081_DEEMPH_WIDTH 2 /* DEEMPH - [2:1] */ + +/* + * R32 (0x20) - DRC 1 + */ +#define WM9081_DRC_ENA 0x8000 /* DRC_ENA */ +#define WM9081_DRC_ENA_MASK 0x8000 /* DRC_ENA */ +#define WM9081_DRC_ENA_SHIFT 15 /* DRC_ENA */ +#define WM9081_DRC_ENA_WIDTH 1 /* DRC_ENA */ +#define WM9081_DRC_STARTUP_GAIN_MASK 0x07C0 /* DRC_STARTUP_GAIN - [10:6] */ +#define WM9081_DRC_STARTUP_GAIN_SHIFT 6 /* DRC_STARTUP_GAIN - [10:6] */ +#define WM9081_DRC_STARTUP_GAIN_WIDTH 5 /* DRC_STARTUP_GAIN - [10:6] */ +#define WM9081_DRC_FF_DLY 0x0020 /* DRC_FF_DLY */ +#define WM9081_DRC_FF_DLY_MASK 0x0020 /* DRC_FF_DLY */ +#define WM9081_DRC_FF_DLY_SHIFT 5 /* DRC_FF_DLY */ +#define WM9081_DRC_FF_DLY_WIDTH 1 /* DRC_FF_DLY */ +#define WM9081_DRC_QR 0x0004 /* DRC_QR */ +#define WM9081_DRC_QR_MASK 0x0004 /* DRC_QR */ +#define WM9081_DRC_QR_SHIFT 2 /* DRC_QR */ +#define WM9081_DRC_QR_WIDTH 1 /* DRC_QR */ +#define WM9081_DRC_ANTICLIP 0x0002 /* DRC_ANTICLIP */ +#define WM9081_DRC_ANTICLIP_MASK 0x0002 /* DRC_ANTICLIP */ +#define WM9081_DRC_ANTICLIP_SHIFT 1 /* DRC_ANTICLIP */ +#define WM9081_DRC_ANTICLIP_WIDTH 1 /* DRC_ANTICLIP */ + +/* + * R33 (0x21) - DRC 2 + */ +#define WM9081_DRC_ATK_MASK 0xF000 /* DRC_ATK - [15:12] */ +#define WM9081_DRC_ATK_SHIFT 12 /* DRC_ATK - [15:12] */ +#define WM9081_DRC_ATK_WIDTH 4 /* DRC_ATK - [15:12] */ +#define WM9081_DRC_DCY_MASK 0x0F00 /* DRC_DCY - [11:8] */ +#define WM9081_DRC_DCY_SHIFT 8 /* DRC_DCY - [11:8] */ +#define WM9081_DRC_DCY_WIDTH 4 /* DRC_DCY - [11:8] */ +#define WM9081_DRC_QR_THR_MASK 0x00C0 /* DRC_QR_THR - [7:6] */ +#define WM9081_DRC_QR_THR_SHIFT 6 /* DRC_QR_THR - [7:6] */ +#define WM9081_DRC_QR_THR_WIDTH 2 /* DRC_QR_THR - [7:6] */ +#define WM9081_DRC_QR_DCY_MASK 0x0030 /* DRC_QR_DCY - [5:4] */ +#define WM9081_DRC_QR_DCY_SHIFT 4 /* DRC_QR_DCY - [5:4] */ +#define WM9081_DRC_QR_DCY_WIDTH 2 /* DRC_QR_DCY - [5:4] */ +#define WM9081_DRC_MINGAIN_MASK 0x000C /* DRC_MINGAIN - [3:2] */ +#define WM9081_DRC_MINGAIN_SHIFT 2 /* DRC_MINGAIN - [3:2] */ +#define WM9081_DRC_MINGAIN_WIDTH 2 /* DRC_MINGAIN - [3:2] */ +#define WM9081_DRC_MAXGAIN_MASK 0x0003 /* DRC_MAXGAIN - [1:0] */ +#define WM9081_DRC_MAXGAIN_SHIFT 0 /* DRC_MAXGAIN - [1:0] */ +#define WM9081_DRC_MAXGAIN_WIDTH 2 /* DRC_MAXGAIN - [1:0] */ + +/* + * R34 (0x22) - DRC 3 + */ +#define WM9081_DRC_HI_COMP_MASK 0x0038 /* DRC_HI_COMP - [5:3] */ +#define WM9081_DRC_HI_COMP_SHIFT 3 /* DRC_HI_COMP - [5:3] */ +#define WM9081_DRC_HI_COMP_WIDTH 3 /* DRC_HI_COMP - [5:3] */ +#define WM9081_DRC_LO_COMP_MASK 0x0007 /* DRC_LO_COMP - [2:0] */ +#define WM9081_DRC_LO_COMP_SHIFT 0 /* DRC_LO_COMP - [2:0] */ +#define WM9081_DRC_LO_COMP_WIDTH 3 /* DRC_LO_COMP - [2:0] */ + +/* + * R35 (0x23) - DRC 4 + */ +#define WM9081_DRC_KNEE_IP_MASK 0x07E0 /* DRC_KNEE_IP - [10:5] */ +#define WM9081_DRC_KNEE_IP_SHIFT 5 /* DRC_KNEE_IP - [10:5] */ +#define WM9081_DRC_KNEE_IP_WIDTH 6 /* DRC_KNEE_IP - [10:5] */ +#define WM9081_DRC_KNEE_OP_MASK 0x001F /* DRC_KNEE_OP - [4:0] */ +#define WM9081_DRC_KNEE_OP_SHIFT 0 /* DRC_KNEE_OP - [4:0] */ +#define WM9081_DRC_KNEE_OP_WIDTH 5 /* DRC_KNEE_OP - [4:0] */ + +/* + * R38 (0x26) - Write Sequencer 1 + */ +#define WM9081_WSEQ_ENA 0x8000 /* WSEQ_ENA */ +#define WM9081_WSEQ_ENA_MASK 0x8000 /* WSEQ_ENA */ +#define WM9081_WSEQ_ENA_SHIFT 15 /* WSEQ_ENA */ +#define WM9081_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */ +#define WM9081_WSEQ_ABORT 0x0200 /* WSEQ_ABORT */ +#define WM9081_WSEQ_ABORT_MASK 0x0200 /* WSEQ_ABORT */ +#define WM9081_WSEQ_ABORT_SHIFT 9 /* WSEQ_ABORT */ +#define WM9081_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */ +#define WM9081_WSEQ_START 0x0100 /* WSEQ_START */ +#define WM9081_WSEQ_START_MASK 0x0100 /* WSEQ_START */ +#define WM9081_WSEQ_START_SHIFT 8 /* WSEQ_START */ +#define WM9081_WSEQ_START_WIDTH 1 /* WSEQ_START */ +#define WM9081_WSEQ_START_INDEX_MASK 0x007F /* WSEQ_START_INDEX - [6:0] */ +#define WM9081_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [6:0] */ +#define WM9081_WSEQ_START_INDEX_WIDTH 7 /* WSEQ_START_INDEX - [6:0] */ + +/* + * R39 (0x27) - Write Sequencer 2 + */ +#define WM9081_WSEQ_CURRENT_INDEX_MASK 0x07F0 /* WSEQ_CURRENT_INDEX - [10:4] */ +#define WM9081_WSEQ_CURRENT_INDEX_SHIFT 4 /* WSEQ_CURRENT_INDEX - [10:4] */ +#define WM9081_WSEQ_CURRENT_INDEX_WIDTH 7 /* WSEQ_CURRENT_INDEX - [10:4] */ +#define WM9081_WSEQ_BUSY 0x0001 /* WSEQ_BUSY */ +#define WM9081_WSEQ_BUSY_MASK 0x0001 /* WSEQ_BUSY */ +#define WM9081_WSEQ_BUSY_SHIFT 0 /* WSEQ_BUSY */ +#define WM9081_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */ + +/* + * R40 (0x28) - MW Slave 1 + */ +#define WM9081_SPI_CFG 0x0020 /* SPI_CFG */ +#define WM9081_SPI_CFG_MASK 0x0020 /* SPI_CFG */ +#define WM9081_SPI_CFG_SHIFT 5 /* SPI_CFG */ +#define WM9081_SPI_CFG_WIDTH 1 /* SPI_CFG */ +#define WM9081_SPI_4WIRE 0x0010 /* SPI_4WIRE */ +#define WM9081_SPI_4WIRE_MASK 0x0010 /* SPI_4WIRE */ +#define WM9081_SPI_4WIRE_SHIFT 4 /* SPI_4WIRE */ +#define WM9081_SPI_4WIRE_WIDTH 1 /* SPI_4WIRE */ +#define WM9081_ARA_ENA 0x0008 /* ARA_ENA */ +#define WM9081_ARA_ENA_MASK 0x0008 /* ARA_ENA */ +#define WM9081_ARA_ENA_SHIFT 3 /* ARA_ENA */ +#define WM9081_ARA_ENA_WIDTH 1 /* ARA_ENA */ +#define WM9081_AUTO_INC 0x0002 /* AUTO_INC */ +#define WM9081_AUTO_INC_MASK 0x0002 /* AUTO_INC */ +#define WM9081_AUTO_INC_SHIFT 1 /* AUTO_INC */ +#define WM9081_AUTO_INC_WIDTH 1 /* AUTO_INC */ + +/* + * R42 (0x2A) - EQ 1 + */ +#define WM9081_EQ_B1_GAIN_MASK 0xF800 /* EQ_B1_GAIN - [15:11] */ +#define WM9081_EQ_B1_GAIN_SHIFT 11 /* EQ_B1_GAIN - [15:11] */ +#define WM9081_EQ_B1_GAIN_WIDTH 5 /* EQ_B1_GAIN - [15:11] */ +#define WM9081_EQ_B2_GAIN_MASK 0x07C0 /* EQ_B2_GAIN - [10:6] */ +#define WM9081_EQ_B2_GAIN_SHIFT 6 /* EQ_B2_GAIN - [10:6] */ +#define WM9081_EQ_B2_GAIN_WIDTH 5 /* EQ_B2_GAIN - [10:6] */ +#define WM9081_EQ_B4_GAIN_MASK 0x003E /* EQ_B4_GAIN - [5:1] */ +#define WM9081_EQ_B4_GAIN_SHIFT 1 /* EQ_B4_GAIN - [5:1] */ +#define WM9081_EQ_B4_GAIN_WIDTH 5 /* EQ_B4_GAIN - [5:1] */ +#define WM9081_EQ_ENA 0x0001 /* EQ_ENA */ +#define WM9081_EQ_ENA_MASK 0x0001 /* EQ_ENA */ +#define WM9081_EQ_ENA_SHIFT 0 /* EQ_ENA */ +#define WM9081_EQ_ENA_WIDTH 1 /* EQ_ENA */ + +/* + * R43 (0x2B) - EQ 2 + */ +#define WM9081_EQ_B3_GAIN_MASK 0xF800 /* EQ_B3_GAIN - [15:11] */ +#define WM9081_EQ_B3_GAIN_SHIFT 11 /* EQ_B3_GAIN - [15:11] */ +#define WM9081_EQ_B3_GAIN_WIDTH 5 /* EQ_B3_GAIN - [15:11] */ +#define WM9081_EQ_B5_GAIN_MASK 0x07C0 /* EQ_B5_GAIN - [10:6] */ +#define WM9081_EQ_B5_GAIN_SHIFT 6 /* EQ_B5_GAIN - [10:6] */ +#define WM9081_EQ_B5_GAIN_WIDTH 5 /* EQ_B5_GAIN - [10:6] */ + +/* + * R44 (0x2C) - EQ 3 + */ +#define WM9081_EQ_B1_A_MASK 0xFFFF /* EQ_B1_A - [15:0] */ +#define WM9081_EQ_B1_A_SHIFT 0 /* EQ_B1_A - [15:0] */ +#define WM9081_EQ_B1_A_WIDTH 16 /* EQ_B1_A - [15:0] */ + +/* + * R45 (0x2D) - EQ 4 + */ +#define WM9081_EQ_B1_B_MASK 0xFFFF /* EQ_B1_B - [15:0] */ +#define WM9081_EQ_B1_B_SHIFT 0 /* EQ_B1_B - [15:0] */ +#define WM9081_EQ_B1_B_WIDTH 16 /* EQ_B1_B - [15:0] */ + +/* + * R46 (0x2E) - EQ 5 + */ +#define WM9081_EQ_B1_PG_MASK 0xFFFF /* EQ_B1_PG - [15:0] */ +#define WM9081_EQ_B1_PG_SHIFT 0 /* EQ_B1_PG - [15:0] */ +#define WM9081_EQ_B1_PG_WIDTH 16 /* EQ_B1_PG - [15:0] */ + +/* + * R47 (0x2F) - EQ 6 + */ +#define WM9081_EQ_B2_A_MASK 0xFFFF /* EQ_B2_A - [15:0] */ +#define WM9081_EQ_B2_A_SHIFT 0 /* EQ_B2_A - [15:0] */ +#define WM9081_EQ_B2_A_WIDTH 16 /* EQ_B2_A - [15:0] */ + +/* + * R48 (0x30) - EQ 7 + */ +#define WM9081_EQ_B2_B_MASK 0xFFFF /* EQ_B2_B - [15:0] */ +#define WM9081_EQ_B2_B_SHIFT 0 /* EQ_B2_B - [15:0] */ +#define WM9081_EQ_B2_B_WIDTH 16 /* EQ_B2_B - [15:0] */ + +/* + * R49 (0x31) - EQ 8 + */ +#define WM9081_EQ_B2_C_MASK 0xFFFF /* EQ_B2_C - [15:0] */ +#define WM9081_EQ_B2_C_SHIFT 0 /* EQ_B2_C - [15:0] */ +#define WM9081_EQ_B2_C_WIDTH 16 /* EQ_B2_C - [15:0] */ + +/* + * R50 (0x32) - EQ 9 + */ +#define WM9081_EQ_B2_PG_MASK 0xFFFF /* EQ_B2_PG - [15:0] */ +#define WM9081_EQ_B2_PG_SHIFT 0 /* EQ_B2_PG - [15:0] */ +#define WM9081_EQ_B2_PG_WIDTH 16 /* EQ_B2_PG - [15:0] */ + +/* + * R51 (0x33) - EQ 10 + */ +#define WM9081_EQ_B4_A_MASK 0xFFFF /* EQ_B4_A - [15:0] */ +#define WM9081_EQ_B4_A_SHIFT 0 /* EQ_B4_A - [15:0] */ +#define WM9081_EQ_B4_A_WIDTH 16 /* EQ_B4_A - [15:0] */ + +/* + * R52 (0x34) - EQ 11 + */ +#define WM9081_EQ_B4_B_MASK 0xFFFF /* EQ_B4_B - [15:0] */ +#define WM9081_EQ_B4_B_SHIFT 0 /* EQ_B4_B - [15:0] */ +#define WM9081_EQ_B4_B_WIDTH 16 /* EQ_B4_B - [15:0] */ + +/* + * R53 (0x35) - EQ 12 + */ +#define WM9081_EQ_B4_C_MASK 0xFFFF /* EQ_B4_C - [15:0] */ +#define WM9081_EQ_B4_C_SHIFT 0 /* EQ_B4_C - [15:0] */ +#define WM9081_EQ_B4_C_WIDTH 16 /* EQ_B4_C - [15:0] */ + +/* + * R54 (0x36) - EQ 13 + */ +#define WM9081_EQ_B4_PG_MASK 0xFFFF /* EQ_B4_PG - [15:0] */ +#define WM9081_EQ_B4_PG_SHIFT 0 /* EQ_B4_PG - [15:0] */ +#define WM9081_EQ_B4_PG_WIDTH 16 /* EQ_B4_PG - [15:0] */ + +/* + * R55 (0x37) - EQ 14 + */ +#define WM9081_EQ_B3_A_MASK 0xFFFF /* EQ_B3_A - [15:0] */ +#define WM9081_EQ_B3_A_SHIFT 0 /* EQ_B3_A - [15:0] */ +#define WM9081_EQ_B3_A_WIDTH 16 /* EQ_B3_A - [15:0] */ + +/* + * R56 (0x38) - EQ 15 + */ +#define WM9081_EQ_B3_B_MASK 0xFFFF /* EQ_B3_B - [15:0] */ +#define WM9081_EQ_B3_B_SHIFT 0 /* EQ_B3_B - [15:0] */ +#define WM9081_EQ_B3_B_WIDTH 16 /* EQ_B3_B - [15:0] */ + +/* + * R57 (0x39) - EQ 16 + */ +#define WM9081_EQ_B3_C_MASK 0xFFFF /* EQ_B3_C - [15:0] */ +#define WM9081_EQ_B3_C_SHIFT 0 /* EQ_B3_C - [15:0] */ +#define WM9081_EQ_B3_C_WIDTH 16 /* EQ_B3_C - [15:0] */ + +/* + * R58 (0x3A) - EQ 17 + */ +#define WM9081_EQ_B3_PG_MASK 0xFFFF /* EQ_B3_PG - [15:0] */ +#define WM9081_EQ_B3_PG_SHIFT 0 /* EQ_B3_PG - [15:0] */ +#define WM9081_EQ_B3_PG_WIDTH 16 /* EQ_B3_PG - [15:0] */ + +/* + * R59 (0x3B) - EQ 18 + */ +#define WM9081_EQ_B5_A_MASK 0xFFFF /* EQ_B5_A - [15:0] */ +#define WM9081_EQ_B5_A_SHIFT 0 /* EQ_B5_A - [15:0] */ +#define WM9081_EQ_B5_A_WIDTH 16 /* EQ_B5_A - [15:0] */ + +/* + * R60 (0x3C) - EQ 19 + */ +#define WM9081_EQ_B5_B_MASK 0xFFFF /* EQ_B5_B - [15:0] */ +#define WM9081_EQ_B5_B_SHIFT 0 /* EQ_B5_B - [15:0] */ +#define WM9081_EQ_B5_B_WIDTH 16 /* EQ_B5_B - [15:0] */ + +/* + * R61 (0x3D) - EQ 20 + */ +#define WM9081_EQ_B5_PG_MASK 0xFFFF /* EQ_B5_PG - [15:0] */ +#define WM9081_EQ_B5_PG_SHIFT 0 /* EQ_B5_PG - [15:0] */ +#define WM9081_EQ_B5_PG_WIDTH 16 /* EQ_B5_PG - [15:0] */ + + +#endif diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index c2d1a7a..fa88b46 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -282,14 +282,14 @@ struct snd_soc_dai wm9705_dai[] = { .channels_min = 1, .channels_max = 2, .rates = WM9705_AC97_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE, + .formats = SND_SOC_STD_AC97_FMTS, }, .capture = { .stream_name = "HiFi Capture", .channels_min = 1, .channels_max = 2, .rates = WM9705_AC97_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE, + .formats = SND_SOC_STD_AC97_FMTS, }, .ops = &wm9705_dai_ops, }, diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 765cf1e..1fd4e88 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -534,13 +534,13 @@ struct snd_soc_dai wm9712_dai[] = { .channels_min = 1, .channels_max = 2, .rates = WM9712_AC97_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .formats = SND_SOC_STD_AC97_FMTS,}, .capture = { .stream_name = "HiFi Capture", .channels_min = 1, .channels_max = 2, .rates = WM9712_AC97_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .formats = SND_SOC_STD_AC97_FMTS,}, .ops = &wm9712_dai_ops_hifi, }, { @@ -550,7 +550,7 @@ struct snd_soc_dai wm9712_dai[] = { .channels_min = 1, .channels_max = 1, .rates = WM9712_AC97_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .formats = SND_SOC_STD_AC97_FMTS,}, .ops = &wm9712_dai_ops_aux, } }; @@ -585,6 +585,8 @@ static int wm9712_reset(struct snd_soc_codec *codec, int try_warm) } soc_ac97_ops.reset(codec->ac97); + if (soc_ac97_ops.warm_reset) + soc_ac97_ops.warm_reset(codec->ac97); if (ac97_read(codec, 0) != wm9712_reg[0]) goto err; return 0; diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 523bad0..abed37a 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -189,6 +189,26 @@ SOC_SINGLE("3D Lower Cut-off Switch", AC97_REC_GAIN_MIC, 4, 1, 0), SOC_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1), }; +static int wm9713_voice_shutdown(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + u16 status, rate; + + BUG_ON(event != SND_SOC_DAPM_PRE_PMD); + + /* Gracefully shut down the voice interface. */ + status = ac97_read(codec, AC97_EXTENDED_MID) | 0x1000; + rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF; + ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00); + ac97_write(codec, AC97_EXTENDED_MID, status); + + return 0; +} + + /* We have to create a fake left and right HP mixers because * the codec only has a single control that is shared by both channels. * This makes it impossible to determine the audio path using the current @@ -400,7 +420,8 @@ SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("HP Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("Line Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("Capture Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), -SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1), +SND_SOC_DAPM_DAC_E("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1, + wm9713_voice_shutdown, SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_DAC("Aux DAC", "Aux Playback", AC97_EXTENDED_MID, 11, 1), SND_SOC_DAPM_PGA("Left ADC", AC97_EXTENDED_MID, 5, 1, NULL, 0), SND_SOC_DAPM_PGA("Right ADC", AC97_EXTENDED_MID, 4, 1, NULL, 0), @@ -689,7 +710,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source) Ndiv = target / source; if ((Ndiv < 5) || (Ndiv > 12)) printk(KERN_WARNING - "WM9713 PLL N value %d out of recommended range!\n", + "WM9713 PLL N value %u out of recommended range!\n", Ndiv); pll_div->n = Ndiv; @@ -936,21 +957,6 @@ static int wm9713_pcm_hw_params(struct snd_pcm_substream *substream, return 0; } -static void wm9713_voiceshutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct snd_soc_codec *codec = dai->codec; - u16 status, rate; - - /* Gracefully shut down the voice interface. */ - status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000; - rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF; - ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200); - schedule_timeout_interruptible(msecs_to_jiffies(1)); - ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00); - ac97_write(codec, AC97_EXTENDED_MID, status); -} - static int ac97_hifi_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -1019,7 +1025,6 @@ static struct snd_soc_dai_ops wm9713_dai_ops_aux = { static struct snd_soc_dai_ops wm9713_dai_ops_voice = { .hw_params = wm9713_pcm_hw_params, - .shutdown = wm9713_voiceshutdown, .set_clkdiv = wm9713_set_dai_clkdiv, .set_pll = wm9713_set_dai_pll, .set_fmt = wm9713_set_dai_fmt, @@ -1035,13 +1040,13 @@ struct snd_soc_dai wm9713_dai[] = { .channels_min = 1, .channels_max = 2, .rates = WM9713_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .formats = SND_SOC_STD_AC97_FMTS,}, .capture = { .stream_name = "HiFi Capture", .channels_min = 1, .channels_max = 2, .rates = WM9713_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .formats = SND_SOC_STD_AC97_FMTS,}, .ops = &wm9713_dai_ops_hifi, }, { @@ -1051,7 +1056,7 @@ struct snd_soc_dai wm9713_dai[] = { .channels_min = 1, .channels_max = 1, .rates = WM9713_RATES, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .formats = SND_SOC_STD_AC97_FMTS,}, .ops = &wm9713_dai_ops_aux, }, { @@ -1069,6 +1074,7 @@ struct snd_soc_dai wm9713_dai[] = { .rates = WM9713_PCM_RATES, .formats = WM9713_PCM_FORMATS,}, .ops = &wm9713_dai_ops_voice, + .symmetric_rates = 1, }, }; EXPORT_SYMBOL_GPL(wm9713_dai); diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 9fc9082..5dbebf8 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -1,5 +1,8 @@ config SND_SOC_OF_SIMPLE tristate + +config SND_MPC52xx_DMA + tristate # ASoC platform support for the Freescale MPC8610 SOC. This compiles drivers # for the SSI and the Elo DMA controller. You will still need to select @@ -22,7 +25,34 @@ config SND_SOC_MPC8610_HPCD config SND_SOC_MPC5200_I2S tristate "Freescale MPC5200 PSC in I2S mode driver" depends on PPC_MPC52xx && PPC_BESTCOMM - select SND_SOC_OF_SIMPLE + select SND_MPC52xx_DMA select PPC_BESTCOMM_GEN_BD help Say Y here to support the MPC5200 PSCs in I2S mode. + +config SND_SOC_MPC5200_AC97 + tristate "Freescale MPC5200 PSC in AC97 mode driver" + depends on PPC_MPC52xx && PPC_BESTCOMM + select AC97_BUS + select SND_MPC52xx_DMA + select PPC_BESTCOMM_GEN_BD + help + Say Y here to support the MPC5200 PSCs in AC97 mode. + +config SND_MPC52xx_SOC_PCM030 + tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712" + depends on PPC_MPC5200_SIMPLE && BROKEN + select SND_SOC_MPC5200_AC97 + select SND_SOC_WM9712 + help + Say Y if you want to add support for sound on the Phytec pcm030 + baseboard. + +config SND_MPC52xx_SOC_EFIKA + tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" + depends on PPC_EFIKA && BROKEN + select SND_SOC_MPC5200_AC97 + select SND_SOC_STAC9766 + help + Say Y if you want to add support for sound on the Efika. + diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index f85134c..a83a739 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -10,5 +10,12 @@ snd-soc-fsl-ssi-objs := fsl_ssi.o snd-soc-fsl-dma-objs := fsl_dma.o obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o +# MPC5200 Platform Support +obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o +obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o + +# MPC5200 Machine Support +obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o +obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c new file mode 100644 index 0000000..85b0e75 --- /dev/null +++ b/sound/soc/fsl/efika-audio-fabric.c @@ -0,0 +1,90 @@ +/* + * Efika driver for the PSC of the Freescale MPC52xx + * configured as AC97 interface + * + * Copyright 2008 Jon Smirl, Digispeaker + * Author: Jon Smirl + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "mpc5200_dma.h" +#include "mpc5200_psc_ac97.h" +#include "../codecs/stac9766.h" + +static struct snd_soc_device device; +static struct snd_soc_card card; + +static struct snd_soc_dai_link efika_fabric_dai[] = { +{ + .name = "AC97", + .stream_name = "AC97 Analog", + .codec_dai = &stac9766_dai[STAC9766_DAI_AC97_ANALOG], + .cpu_dai = &psc_ac97_dai[MPC5200_AC97_NORMAL], +}, +{ + .name = "AC97", + .stream_name = "AC97 IEC958", + .codec_dai = &stac9766_dai[STAC9766_DAI_AC97_DIGITAL], + .cpu_dai = &psc_ac97_dai[MPC5200_AC97_SPDIF], +}, +}; + +static __init int efika_fabric_init(void) +{ + struct platform_device *pdev; + int rc; + + if (!machine_is_compatible("bplan,efika")) + return -ENODEV; + + card.platform = &mpc5200_audio_dma_platform; + card.name = "Efika"; + card.dai_link = efika_fabric_dai; + card.num_links = ARRAY_SIZE(efika_fabric_dai); + + device.card = &card; + device.codec_dev = &soc_codec_dev_stac9766; + + pdev = platform_device_alloc("soc-audio", 1); + if (!pdev) { + pr_err("efika_fabric_init: platform_device_alloc() failed\n"); + return -ENODEV; + } + + platform_set_drvdata(pdev, &device); + device.dev = &pdev->dev; + + rc = platform_device_add(pdev); + if (rc) { + pr_err("efika_fabric_init: platform_device_add() failed\n"); + return -ENODEV; + } + return 0; +} + +module_init(efika_fabric_init); + + +MODULE_AUTHOR("Jon Smirl "); +MODULE_DESCRIPTION(DRV_NAME ": mpc5200 Efika fabric driver"); +MODULE_LICENSE("GPL"); + diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 3711d84..93f0f38 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -375,18 +375,14 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, struct snd_pcm_runtime *first_runtime = ssi_private->first_stream->runtime; - if (!first_runtime->rate || !first_runtime->sample_bits) { + if (!first_runtime->sample_bits) { dev_err(substream->pcm->card->dev, - "set sample rate and size in %s stream first\n", + "set sample size in %s stream first\n", substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? "capture" : "playback"); return -EAGAIN; } - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_RATE, - first_runtime->rate, first_runtime->rate); - /* If we're in synchronous mode, then we need to constrain * the sample size as well. We don't support independent sample * rates in asynchronous mode. @@ -674,7 +670,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info) ssi_private->dev = ssi_info->dev; ssi_private->asynchronous = ssi_info->asynchronous; - ssi_private->dev->driver_data = fsl_ssi_dai; + dev_set_drvdata(ssi_private->dev, fsl_ssi_dai); /* Initialize the the device_attribute structure */ dev_attr->attr.name = "ssi-stats"; @@ -693,6 +689,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info) fsl_ssi_dai->name = ssi_private->name; fsl_ssi_dai->id = ssi_info->id; fsl_ssi_dai->dev = ssi_info->dev; + fsl_ssi_dai->symmetric_rates = 1; ret = snd_soc_register_dai(fsl_ssi_dai); if (ret != 0) { diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c new file mode 100644 index 0000000..efec33a --- /dev/null +++ b/sound/soc/fsl/mpc5200_dma.c @@ -0,0 +1,564 @@ +/* + * Freescale MPC5200 PSC DMA + * ALSA SoC Platform driver + * + * Copyright (C) 2008 Secret Lab Technologies Ltd. + * Copyright (C) 2009 Jon Smirl, Digispeaker + */ + +#include +#include + +#include + +#include +#include +#include + +#include "mpc5200_dma.h" + +/* + * Interrupt handlers + */ +static irqreturn_t psc_dma_status_irq(int irq, void *_psc_dma) +{ + struct psc_dma *psc_dma = _psc_dma; + struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs; + u16 isr; + + isr = in_be16(®s->mpc52xx_psc_isr); + + /* Playback underrun error */ + if (psc_dma->playback.active && (isr & MPC52xx_PSC_IMR_TXEMP)) + psc_dma->stats.underrun_count++; + + /* Capture overrun error */ + if (psc_dma->capture.active && (isr & MPC52xx_PSC_IMR_ORERR)) + psc_dma->stats.overrun_count++; + + out_8(®s->command, MPC52xx_PSC_RST_ERR_STAT); + + return IRQ_HANDLED; +} + +/** + * psc_dma_bcom_enqueue_next_buffer - Enqueue another audio buffer + * @s: pointer to stream private data structure + * + * Enqueues another audio period buffer into the bestcomm queue. + * + * Note: The routine must only be called when there is space available in + * the queue. Otherwise the enqueue will fail and the audio ring buffer + * will get out of sync + */ +static void psc_dma_bcom_enqueue_next_buffer(struct psc_dma_stream *s) +{ + struct bcom_bd *bd; + + /* Prepare and enqueue the next buffer descriptor */ + bd = bcom_prepare_next_buffer(s->bcom_task); + bd->status = s->period_bytes; + bd->data[0] = s->period_next_pt; + bcom_submit_next_buffer(s->bcom_task, NULL); + + /* Update for next period */ + s->period_next_pt += s->period_bytes; + if (s->period_next_pt >= s->period_end) + s->period_next_pt = s->period_start; +} + +static void psc_dma_bcom_enqueue_tx(struct psc_dma_stream *s) +{ + while (s->appl_ptr < s->runtime->control->appl_ptr) { + + if (bcom_queue_full(s->bcom_task)) + return; + + s->appl_ptr += s->period_size; + + psc_dma_bcom_enqueue_next_buffer(s); + } +} + +/* Bestcomm DMA irq handler */ +static irqreturn_t psc_dma_bcom_irq_tx(int irq, void *_psc_dma_stream) +{ + struct psc_dma_stream *s = _psc_dma_stream; + + spin_lock(&s->psc_dma->lock); + /* For each finished period, dequeue the completed period buffer + * and enqueue a new one in it's place. */ + while (bcom_buffer_done(s->bcom_task)) { + bcom_retrieve_buffer(s->bcom_task, NULL, NULL); + + s->period_current_pt += s->period_bytes; + if (s->period_current_pt >= s->period_end) + s->period_current_pt = s->period_start; + } + psc_dma_bcom_enqueue_tx(s); + spin_unlock(&s->psc_dma->lock); + + /* If the stream is active, then also inform the PCM middle layer + * of the period finished event. */ + if (s->active) + snd_pcm_period_elapsed(s->stream); + + return IRQ_HANDLED; +} + +static irqreturn_t psc_dma_bcom_irq_rx(int irq, void *_psc_dma_stream) +{ + struct psc_dma_stream *s = _psc_dma_stream; + + spin_lock(&s->psc_dma->lock); + /* For each finished period, dequeue the completed period buffer + * and enqueue a new one in it's place. */ + while (bcom_buffer_done(s->bcom_task)) { + bcom_retrieve_buffer(s->bcom_task, NULL, NULL); + + s->period_current_pt += s->period_bytes; + if (s->period_current_pt >= s->period_end) + s->period_current_pt = s->period_start; + + psc_dma_bcom_enqueue_next_buffer(s); + } + spin_unlock(&s->psc_dma->lock); + + /* If the stream is active, then also inform the PCM middle layer + * of the period finished event. */ + if (s->active) + snd_pcm_period_elapsed(s->stream); + + return IRQ_HANDLED; +} + +static int psc_dma_hw_free(struct snd_pcm_substream *substream) +{ + snd_pcm_set_runtime_buffer(substream, NULL); + return 0; +} + +/** + * psc_dma_trigger: start and stop the DMA transfer. + * + * This function is called by ALSA to start, stop, pause, and resume the DMA + * transfer of data. + */ +static int psc_dma_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct psc_dma_stream *s; + struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs; + u16 imr; + unsigned long flags; + int i; + + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) + s = &psc_dma->capture; + else + s = &psc_dma->playback; + + dev_dbg(psc_dma->dev, "psc_dma_trigger(substream=%p, cmd=%i)" + " stream_id=%i\n", + substream, cmd, substream->pstr->stream); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + s->period_bytes = frames_to_bytes(runtime, + runtime->period_size); + s->period_start = virt_to_phys(runtime->dma_area); + s->period_end = s->period_start + + (s->period_bytes * runtime->periods); + s->period_next_pt = s->period_start; + s->period_current_pt = s->period_start; + s->period_size = runtime->period_size; + s->active = 1; + + /* track appl_ptr so that we have a better chance of detecting + * end of stream and not over running it. + */ + s->runtime = runtime; + s->appl_ptr = s->runtime->control->appl_ptr - + (runtime->period_size * runtime->periods); + + /* Fill up the bestcomm bd queue and enable DMA. + * This will begin filling the PSC's fifo. + */ + spin_lock_irqsave(&psc_dma->lock, flags); + + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) { + bcom_gen_bd_rx_reset(s->bcom_task); + for (i = 0; i < runtime->periods; i++) + if (!bcom_queue_full(s->bcom_task)) + psc_dma_bcom_enqueue_next_buffer(s); + } else { + bcom_gen_bd_tx_reset(s->bcom_task); + psc_dma_bcom_enqueue_tx(s); + } + + bcom_enable(s->bcom_task); + spin_unlock_irqrestore(&psc_dma->lock, flags); + + out_8(®s->command, MPC52xx_PSC_RST_ERR_STAT); + + break; + + case SNDRV_PCM_TRIGGER_STOP: + s->active = 0; + + spin_lock_irqsave(&psc_dma->lock, flags); + bcom_disable(s->bcom_task); + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) + bcom_gen_bd_rx_reset(s->bcom_task); + else + bcom_gen_bd_tx_reset(s->bcom_task); + spin_unlock_irqrestore(&psc_dma->lock, flags); + + break; + + default: + dev_dbg(psc_dma->dev, "invalid command\n"); + return -EINVAL; + } + + /* Update interrupt enable settings */ + imr = 0; + if (psc_dma->playback.active) + imr |= MPC52xx_PSC_IMR_TXEMP; + if (psc_dma->capture.active) + imr |= MPC52xx_PSC_IMR_ORERR; + out_be16(®s->isr_imr.imr, psc_dma->imr | imr); + + return 0; +} + + +/* --------------------------------------------------------------------- + * The PSC DMA 'ASoC platform' driver + * + * Can be referenced by an 'ASoC machine' driver + * This driver only deals with the audio bus; it doesn't have any + * interaction with the attached codec + */ + +static const struct snd_pcm_hardware psc_dma_hardware = { + .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_BATCH, + .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE, + .rate_min = 8000, + .rate_max = 48000, + .channels_min = 1, + .channels_max = 2, + .period_bytes_max = 1024 * 1024, + .period_bytes_min = 32, + .periods_min = 2, + .periods_max = 256, + .buffer_bytes_max = 2 * 1024 * 1024, + .fifo_size = 512, +}; + +static int psc_dma_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data; + struct psc_dma_stream *s; + int rc; + + dev_dbg(psc_dma->dev, "psc_dma_open(substream=%p)\n", substream); + + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) + s = &psc_dma->capture; + else + s = &psc_dma->playback; + + snd_soc_set_runtime_hwparams(substream, &psc_dma_hardware); + + rc = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (rc < 0) { + dev_err(substream->pcm->card->dev, "invalid buffer size\n"); + return rc; + } + + s->stream = substream; + return 0; +} + +static int psc_dma_close(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data; + struct psc_dma_stream *s; + + dev_dbg(psc_dma->dev, "psc_dma_close(substream=%p)\n", substream); + + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) + s = &psc_dma->capture; + else + s = &psc_dma->playback; + + if (!psc_dma->playback.active && + !psc_dma->capture.active) { + + /* Disable all interrupts and reset the PSC */ + out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr); + out_8(&psc_dma->psc_regs->command, 4 << 4); /* reset error */ + } + s->stream = NULL; + return 0; +} + +static snd_pcm_uframes_t +psc_dma_pointer(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data; + struct psc_dma_stream *s; + dma_addr_t count; + + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) + s = &psc_dma->capture; + else + s = &psc_dma->playback; + + count = s->period_current_pt - s->period_start; + + return bytes_to_frames(substream->runtime, count); +} + +static int +psc_dma_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + + return 0; +} + +static struct snd_pcm_ops psc_dma_ops = { + .open = psc_dma_open, + .close = psc_dma_close, + .hw_free = psc_dma_hw_free, + .ioctl = snd_pcm_lib_ioctl, + .pointer = psc_dma_pointer, + .trigger = psc_dma_trigger, + .hw_params = psc_dma_hw_params, +}; + +static u64 psc_dma_dmamask = 0xffffffff; +static int psc_dma_new(struct snd_card *card, struct snd_soc_dai *dai, + struct snd_pcm *pcm) +{ + struct snd_soc_pcm_runtime *rtd = pcm->private_data; + struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data; + size_t size = psc_dma_hardware.buffer_bytes_max; + int rc = 0; + + dev_dbg(rtd->socdev->dev, "psc_dma_new(card=%p, dai=%p, pcm=%p)\n", + card, dai, pcm); + + if (!card->dev->dma_mask) + card->dev->dma_mask = &psc_dma_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (pcm->streams[0].substream) { + rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev, + size, &pcm->streams[0].substream->dma_buffer); + if (rc) + goto playback_alloc_err; + } + + if (pcm->streams[1].substream) { + rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev, + size, &pcm->streams[1].substream->dma_buffer); + if (rc) + goto capture_alloc_err; + } + + if (rtd->socdev->card->codec->ac97) + rtd->socdev->card->codec->ac97->private_data = psc_dma; + + return 0; + + capture_alloc_err: + if (pcm->streams[0].substream) + snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer); + + playback_alloc_err: + dev_err(card->dev, "Cannot allocate buffer(s)\n"); + + return -ENOMEM; +} + +static void psc_dma_free(struct snd_pcm *pcm) +{ + struct snd_soc_pcm_runtime *rtd = pcm->private_data; + struct snd_pcm_substream *substream; + int stream; + + dev_dbg(rtd->socdev->dev, "psc_dma_free(pcm=%p)\n", pcm); + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (substream) { + snd_dma_free_pages(&substream->dma_buffer); + substream->dma_buffer.area = NULL; + substream->dma_buffer.addr = 0; + } + } +} + +struct snd_soc_platform mpc5200_audio_dma_platform = { + .name = "mpc5200-psc-audio", + .pcm_ops = &psc_dma_ops, + .pcm_new = &psc_dma_new, + .pcm_free = &psc_dma_free, +}; +EXPORT_SYMBOL_GPL(mpc5200_audio_dma_platform); + +int mpc5200_audio_dma_create(struct of_device *op) +{ + phys_addr_t fifo; + struct psc_dma *psc_dma; + struct resource res; + int size, irq, rc; + const __be32 *prop; + void __iomem *regs; + + /* Fetch the registers and IRQ of the PSC */ + irq = irq_of_parse_and_map(op->node, 0); + if (of_address_to_resource(op->node, 0, &res)) { + dev_err(&op->dev, "Missing reg property\n"); + return -ENODEV; + } + regs = ioremap(res.start, 1 + res.end - res.start); + if (!regs) { + dev_err(&op->dev, "Could not map registers\n"); + return -ENODEV; + } + + /* Allocate and initialize the driver private data */ + psc_dma = kzalloc(sizeof *psc_dma, GFP_KERNEL); + if (!psc_dma) { + iounmap(regs); + return -ENOMEM; + } + + /* Get the PSC ID */ + prop = of_get_property(op->node, "cell-index", &size); + if (!prop || size < sizeof *prop) + return -ENODEV; + + spin_lock_init(&psc_dma->lock); + psc_dma->id = be32_to_cpu(*prop); + psc_dma->irq = irq; + psc_dma->psc_regs = regs; + psc_dma->fifo_regs = regs + sizeof *psc_dma->psc_regs; + psc_dma->dev = &op->dev; + psc_dma->playback.psc_dma = psc_dma; + psc_dma->capture.psc_dma = psc_dma; + snprintf(psc_dma->name, sizeof psc_dma->name, "PSC%u", psc_dma->id); + + /* Find the address of the fifo data registers and setup the + * DMA tasks */ + fifo = res.start + offsetof(struct mpc52xx_psc, buffer.buffer_32); + psc_dma->capture.bcom_task = + bcom_psc_gen_bd_rx_init(psc_dma->id, 10, fifo, 512); + psc_dma->playback.bcom_task = + bcom_psc_gen_bd_tx_init(psc_dma->id, 10, fifo); + if (!psc_dma->capture.bcom_task || + !psc_dma->playback.bcom_task) { + dev_err(&op->dev, "Could not allocate bestcomm tasks\n"); + iounmap(regs); + kfree(psc_dma); + return -ENODEV; + } + + /* Disable all interrupts and reset the PSC */ + out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr); + /* reset receiver */ + out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_RX); + /* reset transmitter */ + out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_TX); + /* reset error */ + out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_ERR_STAT); + /* reset mode */ + out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_SEL_MODE_REG_1); + + /* Set up mode register; + * First write: RxRdy (FIFO Alarm) generates rx FIFO irq + * Second write: register Normal mode for non loopback + */ + out_8(&psc_dma->psc_regs->mode, 0); + out_8(&psc_dma->psc_regs->mode, 0); + + /* Set the TX and RX fifo alarm thresholds */ + out_be16(&psc_dma->fifo_regs->rfalarm, 0x100); + out_8(&psc_dma->fifo_regs->rfcntl, 0x4); + out_be16(&psc_dma->fifo_regs->tfalarm, 0x100); + out_8(&psc_dma->fifo_regs->tfcntl, 0x7); + + /* Lookup the IRQ numbers */ + psc_dma->playback.irq = + bcom_get_task_irq(psc_dma->playback.bcom_task); + psc_dma->capture.irq = + bcom_get_task_irq(psc_dma->capture.bcom_task); + + rc = request_irq(psc_dma->irq, &psc_dma_status_irq, IRQF_SHARED, + "psc-dma-status", psc_dma); + rc |= request_irq(psc_dma->capture.irq, + &psc_dma_bcom_irq_rx, IRQF_SHARED, + "psc-dma-capture", &psc_dma->capture); + rc |= request_irq(psc_dma->playback.irq, + &psc_dma_bcom_irq_tx, IRQF_SHARED, + "psc-dma-playback", &psc_dma->playback); + if (rc) { + free_irq(psc_dma->irq, psc_dma); + free_irq(psc_dma->capture.irq, + &psc_dma->capture); + free_irq(psc_dma->playback.irq, + &psc_dma->playback); + return -ENODEV; + } + + /* Save what we've done so it can be found again later */ + dev_set_drvdata(&op->dev, psc_dma); + + /* Tell the ASoC OF helpers about it */ + return snd_soc_register_platform(&mpc5200_audio_dma_platform); +} +EXPORT_SYMBOL_GPL(mpc5200_audio_dma_create); + +int mpc5200_audio_dma_destroy(struct of_device *op) +{ + struct psc_dma *psc_dma = dev_get_drvdata(&op->dev); + + dev_dbg(&op->dev, "mpc5200_audio_dma_destroy()\n"); + + snd_soc_unregister_platform(&mpc5200_audio_dma_platform); + + bcom_gen_bd_rx_release(psc_dma->capture.bcom_task); + bcom_gen_bd_tx_release(psc_dma->playback.bcom_task); + + /* Release irqs */ + free_irq(psc_dma->irq, psc_dma); + free_irq(psc_dma->capture.irq, &psc_dma->capture); + free_irq(psc_dma->playback.irq, &psc_dma->playback); + + iounmap(psc_dma->psc_regs); + kfree(psc_dma); + dev_set_drvdata(&op->dev, NULL); + + return 0; +} +EXPORT_SYMBOL_GPL(mpc5200_audio_dma_destroy); + +MODULE_AUTHOR("Grant Likely "); +MODULE_DESCRIPTION("Freescale MPC5200 PSC in DMA mode ASoC Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h new file mode 100644 index 0000000..2000803 --- /dev/null +++ b/sound/soc/fsl/mpc5200_dma.h @@ -0,0 +1,80 @@ +/* + * Freescale MPC5200 Audio DMA driver + */ + +#ifndef __SOUND_SOC_FSL_MPC5200_DMA_H__ +#define __SOUND_SOC_FSL_MPC5200_DMA_H__ + +#define PSC_STREAM_NAME_LEN 32 + +/** + * psc_ac97_stream - Data specific to a single stream (playback or capture) + * @active: flag indicating if the stream is active + * @psc_dma: pointer back to parent psc_dma data structure + * @bcom_task: bestcomm task structure + * @irq: irq number for bestcomm task + * @period_start: physical address of start of DMA region + * @period_end: physical address of end of DMA region + * @period_next_pt: physical address of next DMA buffer to enqueue + * @period_bytes: size of DMA period in bytes + */ +struct psc_dma_stream { + struct snd_pcm_runtime *runtime; + snd_pcm_uframes_t appl_ptr; + + int active; + struct psc_dma *psc_dma; + struct bcom_task *bcom_task; + int irq; + struct snd_pcm_substream *stream; + dma_addr_t period_start; + dma_addr_t period_end; + dma_addr_t period_next_pt; + dma_addr_t period_current_pt; + int period_bytes; + int period_size; +}; + +/** + * psc_dma - Private driver data + * @name: short name for this device ("PSC0", "PSC1", etc) + * @psc_regs: pointer to the PSC's registers + * @fifo_regs: pointer to the PSC's FIFO registers + * @irq: IRQ of this PSC + * @dev: struct device pointer + * @dai: the CPU DAI for this device + * @sicr: Base value used in serial interface control register; mode is ORed + * with this value. + * @playback: Playback stream context data + * @capture: Capture stream context data + */ +struct psc_dma { + char name[32]; + struct mpc52xx_psc __iomem *psc_regs; + struct mpc52xx_psc_fifo __iomem *fifo_regs; + unsigned int irq; + struct device *dev; + spinlock_t lock; + u32 sicr; + uint sysclk; + int imr; + int id; + unsigned int slots; + + /* per-stream data */ + struct psc_dma_stream playback; + struct psc_dma_stream capture; + + /* Statistics */ + struct { + unsigned long overrun_count; + unsigned long underrun_count; + } stats; +}; + +int mpc5200_audio_dma_create(struct of_device *op); +int mpc5200_audio_dma_destroy(struct of_device *op); + +extern struct snd_soc_platform mpc5200_audio_dma_platform; + +#endif /* __SOUND_SOC_FSL_MPC5200_DMA_H__ */ diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c new file mode 100644 index 0000000..794a247 --- /dev/null +++ b/sound/soc/fsl/mpc5200_psc_ac97.c @@ -0,0 +1,329 @@ +/* + * linux/sound/mpc5200-ac97.c -- AC97 support for the Freescale MPC52xx chip. + * + * Copyright (C) 2009 Jon Smirl, Digispeaker + * Author: Jon Smirl + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "mpc5200_dma.h" +#include "mpc5200_psc_ac97.h" + +#define DRV_NAME "mpc5200-psc-ac97" + +/* ALSA only supports a single AC97 device so static is recommend here */ +static struct psc_dma *psc_dma; + +static unsigned short psc_ac97_read(struct snd_ac97 *ac97, unsigned short reg) +{ + int status; + unsigned int val; + + /* Wait for command send status zero = ready */ + status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) & + MPC52xx_PSC_SR_CMDSEND), 100, 0); + if (status == 0) { + pr_err("timeout on ac97 bus (rdy)\n"); + return -ENODEV; + } + /* Send the read */ + out_be32(&psc_dma->psc_regs->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24)); + + /* Wait for the answer */ + status = spin_event_timeout((in_be16(&psc_dma->psc_regs->sr_csr.status) & + MPC52xx_PSC_SR_DATA_VAL), 100, 0); + if (status == 0) { + pr_err("timeout on ac97 read (val) %x\n", + in_be16(&psc_dma->psc_regs->sr_csr.status)); + return -ENODEV; + } + /* Get the data */ + val = in_be32(&psc_dma->psc_regs->ac97_data); + if (((val >> 24) & 0x7f) != reg) { + pr_err("reg echo error on ac97 read\n"); + return -ENODEV; + } + val = (val >> 8) & 0xffff; + + return (unsigned short) val; +} + +static void psc_ac97_write(struct snd_ac97 *ac97, + unsigned short reg, unsigned short val) +{ + int status; + + /* Wait for command status zero = ready */ + status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) & + MPC52xx_PSC_SR_CMDSEND), 100, 0); + if (status == 0) { + pr_err("timeout on ac97 bus (write)\n"); + return; + } + /* Write data */ + out_be32(&psc_dma->psc_regs->ac97_cmd, + ((reg & 0x7f) << 24) | (val << 8)); +} + +static void psc_ac97_warm_reset(struct snd_ac97 *ac97) +{ + struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs; + + out_be32(®s->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR); + udelay(3); + out_be32(®s->sicr, psc_dma->sicr); +} + +static void psc_ac97_cold_reset(struct snd_ac97 *ac97) +{ + struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs; + + /* Do a cold reset */ + out_8(®s->op1, MPC52xx_PSC_OP_RES); + udelay(10); + out_8(®s->op0, MPC52xx_PSC_OP_RES); + udelay(50); + psc_ac97_warm_reset(ac97); +} + +struct snd_ac97_bus_ops soc_ac97_ops = { + .read = psc_ac97_read, + .write = psc_ac97_write, + .reset = psc_ac97_cold_reset, + .warm_reset = psc_ac97_warm_reset, +}; +EXPORT_SYMBOL_GPL(soc_ac97_ops); + +static int psc_ac97_hw_analog_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct psc_dma *psc_dma = cpu_dai->private_data; + + dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i" + " periods=%i buffer_size=%i buffer_bytes=%i channels=%i" + " rate=%i format=%i\n", + __func__, substream, params_period_size(params), + params_period_bytes(params), params_periods(params), + params_buffer_size(params), params_buffer_bytes(params), + params_channels(params), params_rate(params), + params_format(params)); + + + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) { + if (params_channels(params) == 1) + psc_dma->slots |= 0x00000100; + else + psc_dma->slots |= 0x00000300; + } else { + if (params_channels(params) == 1) + psc_dma->slots |= 0x01000000; + else + psc_dma->slots |= 0x03000000; + } + out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots); + + return 0; +} + +static int psc_ac97_hw_digital_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct psc_dma *psc_dma = cpu_dai->private_data; + + if (params_channels(params) == 1) + out_be32(&psc_dma->psc_regs->ac97_slots, 0x01000000); + else + out_be32(&psc_dma->psc_regs->ac97_slots, 0x03000000); + + return 0; +} + +static int psc_ac97_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_STOP: + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) + psc_dma->slots &= 0xFFFF0000; + else + psc_dma->slots &= 0x0000FFFF; + + out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots); + break; + } + return 0; +} + +static int psc_ac97_probe(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct psc_dma *psc_dma = cpu_dai->private_data; + struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs; + + /* Go */ + out_8(®s->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE); + return 0; +} + +/* --------------------------------------------------------------------- + * ALSA SoC Bindings + * + * - Digital Audio Interface (DAI) template + * - create/destroy dai hooks + */ + +/** + * psc_ac97_dai_template: template CPU Digital Audio Interface + */ +static struct snd_soc_dai_ops psc_ac97_analog_ops = { + .hw_params = psc_ac97_hw_analog_params, + .trigger = psc_ac97_trigger, +}; + +static struct snd_soc_dai_ops psc_ac97_digital_ops = { + .hw_params = psc_ac97_hw_digital_params, +}; + +struct snd_soc_dai psc_ac97_dai[] = { +{ + .name = "AC97", + .ac97_control = 1, + .probe = psc_ac97_probe, + .playback = { + .channels_min = 1, + .channels_max = 6, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FMTBIT_S32_BE, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FMTBIT_S32_BE, + }, + .ops = &psc_ac97_analog_ops, +}, +{ + .name = "SPDIF", + .ac97_control = 1, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE, + }, + .ops = &psc_ac97_digital_ops, +} }; +EXPORT_SYMBOL_GPL(psc_ac97_dai); + + + +/* --------------------------------------------------------------------- + * OF platform bus binding code: + * - Probe/remove operations + * - OF device match table + */ +static int __devinit psc_ac97_of_probe(struct of_device *op, + const struct of_device_id *match) +{ + int rc, i; + struct snd_ac97 ac97; + struct mpc52xx_psc __iomem *regs; + + rc = mpc5200_audio_dma_create(op); + if (rc != 0) + return rc; + + for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++) + psc_ac97_dai[i].dev = &op->dev; + + rc = snd_soc_register_dais(psc_ac97_dai, ARRAY_SIZE(psc_ac97_dai)); + if (rc != 0) { + dev_err(&op->dev, "Failed to register DAI\n"); + return rc; + } + + psc_dma = dev_get_drvdata(&op->dev); + regs = psc_dma->psc_regs; + ac97.private_data = psc_dma; + + for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++) + psc_ac97_dai[i].private_data = psc_dma; + + psc_dma->imr = 0; + out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr); + + /* Configure the serial interface mode to AC97 */ + psc_dma->sicr = MPC52xx_PSC_SICR_SIM_AC97 | MPC52xx_PSC_SICR_ENAC97; + out_be32(®s->sicr, psc_dma->sicr); + + /* No slots active */ + out_be32(®s->ac97_slots, 0x00000000); + + return 0; +} + +static int __devexit psc_ac97_of_remove(struct of_device *op) +{ + return mpc5200_audio_dma_destroy(op); +} + +/* Match table for of_platform binding */ +static struct of_device_id psc_ac97_match[] __devinitdata = { + { .compatible = "fsl,mpc5200-psc-ac97", }, + { .compatible = "fsl,mpc5200b-psc-ac97", }, + {} +}; +MODULE_DEVICE_TABLE(of, psc_ac97_match); + +static struct of_platform_driver psc_ac97_driver = { + .match_table = psc_ac97_match, + .probe = psc_ac97_of_probe, + .remove = __devexit_p(psc_ac97_of_remove), + .driver = { + .name = "mpc5200-psc-ac97", + .owner = THIS_MODULE, + }, +}; + +/* --------------------------------------------------------------------- + * Module setup and teardown; simply register the of_platform driver + * for the PSC in AC97 mode. + */ +static int __init psc_ac97_init(void) +{ + return of_register_platform_driver(&psc_ac97_driver); +} +module_init(psc_ac97_init); + +static void __exit psc_ac97_exit(void) +{ + of_unregister_platform_driver(&psc_ac97_driver); +} +module_exit(psc_ac97_exit); + +MODULE_AUTHOR("Jon Smirl "); +MODULE_DESCRIPTION("mpc5200 AC97 module"); +MODULE_LICENSE("GPL"); + diff --git a/sound/soc/fsl/mpc5200_psc_ac97.h b/sound/soc/fsl/mpc5200_psc_ac97.h new file mode 100644 index 0000000..4bc18c3 --- /dev/null +++ b/sound/soc/fsl/mpc5200_psc_ac97.h @@ -0,0 +1,15 @@ +/* + * Freescale MPC5200 PSC in AC97 mode + * ALSA SoC Digital Audio Interface (DAI) driver + * + */ + +#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__ +#define __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__ + +extern struct snd_soc_dai psc_ac97_dai[]; + +#define MPC5200_AC97_NORMAL 0 +#define MPC5200_AC97_SPDIF 1 + +#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__ */ diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c index 1111c71..ce8de90 100644 --- a/sound/soc/fsl/mpc5200_psc_i2s.c +++ b/sound/soc/fsl/mpc5200_psc_i2s.c @@ -3,31 +3,21 @@ * ALSA SoC Digital Audio Interface (DAI) driver * * Copyright (C) 2008 Secret Lab Technologies Ltd. + * Copyright (C) 2009 Jon Smirl, Digispeaker */ -#include #include -#include -#include -#include #include #include -#include -#include #include #include -#include #include -#include -#include -#include #include -MODULE_AUTHOR("Grant Likely "); -MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver"); -MODULE_LICENSE("GPL"); +#include "mpc5200_psc_i2s.h" +#include "mpc5200_dma.h" /** * PSC_I2S_RATES: sample rates supported by the I2S @@ -44,191 +34,17 @@ MODULE_LICENSE("GPL"); * PSC_I2S_FORMATS: audio formats supported by the PSC I2S mode */ #define PSC_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | \ - SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE | \ - SNDRV_PCM_FMTBIT_S32_BE) - -/** - * psc_i2s_stream - Data specific to a single stream (playback or capture) - * @active: flag indicating if the stream is active - * @psc_i2s: pointer back to parent psc_i2s data structure - * @bcom_task: bestcomm task structure - * @irq: irq number for bestcomm task - * @period_start: physical address of start of DMA region - * @period_end: physical address of end of DMA region - * @period_next_pt: physical address of next DMA buffer to enqueue - * @period_bytes: size of DMA period in bytes - */ -struct psc_i2s_stream { - int active; - struct psc_i2s *psc_i2s; - struct bcom_task *bcom_task; - int irq; - struct snd_pcm_substream *stream; - dma_addr_t period_start; - dma_addr_t period_end; - dma_addr_t period_next_pt; - dma_addr_t period_current_pt; - int period_bytes; -}; - -/** - * psc_i2s - Private driver data - * @name: short name for this device ("PSC0", "PSC1", etc) - * @psc_regs: pointer to the PSC's registers - * @fifo_regs: pointer to the PSC's FIFO registers - * @irq: IRQ of this PSC - * @dev: struct device pointer - * @dai: the CPU DAI for this device - * @sicr: Base value used in serial interface control register; mode is ORed - * with this value. - * @playback: Playback stream context data - * @capture: Capture stream context data - */ -struct psc_i2s { - char name[32]; - struct mpc52xx_psc __iomem *psc_regs; - struct mpc52xx_psc_fifo __iomem *fifo_regs; - unsigned int irq; - struct device *dev; - struct snd_soc_dai dai; - spinlock_t lock; - u32 sicr; - - /* per-stream data */ - struct psc_i2s_stream playback; - struct psc_i2s_stream capture; - - /* Statistics */ - struct { - int overrun_count; - int underrun_count; - } stats; -}; - -/* - * Interrupt handlers - */ -static irqreturn_t psc_i2s_status_irq(int irq, void *_psc_i2s) -{ - struct psc_i2s *psc_i2s = _psc_i2s; - struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs; - u16 isr; - - isr = in_be16(®s->mpc52xx_psc_isr); - - /* Playback underrun error */ - if (psc_i2s->playback.active && (isr & MPC52xx_PSC_IMR_TXEMP)) - psc_i2s->stats.underrun_count++; - - /* Capture overrun error */ - if (psc_i2s->capture.active && (isr & MPC52xx_PSC_IMR_ORERR)) - psc_i2s->stats.overrun_count++; - - out_8(®s->command, 4 << 4); /* reset the error status */ - - return IRQ_HANDLED; -} - -/** - * psc_i2s_bcom_enqueue_next_buffer - Enqueue another audio buffer - * @s: pointer to stream private data structure - * - * Enqueues another audio period buffer into the bestcomm queue. - * - * Note: The routine must only be called when there is space available in - * the queue. Otherwise the enqueue will fail and the audio ring buffer - * will get out of sync - */ -static void psc_i2s_bcom_enqueue_next_buffer(struct psc_i2s_stream *s) -{ - struct bcom_bd *bd; - - /* Prepare and enqueue the next buffer descriptor */ - bd = bcom_prepare_next_buffer(s->bcom_task); - bd->status = s->period_bytes; - bd->data[0] = s->period_next_pt; - bcom_submit_next_buffer(s->bcom_task, NULL); - - /* Update for next period */ - s->period_next_pt += s->period_bytes; - if (s->period_next_pt >= s->period_end) - s->period_next_pt = s->period_start; -} - -/* Bestcomm DMA irq handler */ -static irqreturn_t psc_i2s_bcom_irq(int irq, void *_psc_i2s_stream) -{ - struct psc_i2s_stream *s = _psc_i2s_stream; - - /* For each finished period, dequeue the completed period buffer - * and enqueue a new one in it's place. */ - while (bcom_buffer_done(s->bcom_task)) { - bcom_retrieve_buffer(s->bcom_task, NULL, NULL); - s->period_current_pt += s->period_bytes; - if (s->period_current_pt >= s->period_end) - s->period_current_pt = s->period_start; - psc_i2s_bcom_enqueue_next_buffer(s); - bcom_enable(s->bcom_task); - } - - /* If the stream is active, then also inform the PCM middle layer - * of the period finished event. */ - if (s->active) - snd_pcm_period_elapsed(s->stream); - - return IRQ_HANDLED; -} - -/** - * psc_i2s_startup: create a new substream - * - * This is the first function called when a stream is opened. - * - * If this is the first stream open, then grab the IRQ and program most of - * the PSC registers. - */ -static int psc_i2s_startup(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data; - int rc; - - dev_dbg(psc_i2s->dev, "psc_i2s_startup(substream=%p)\n", substream); - - if (!psc_i2s->playback.active && - !psc_i2s->capture.active) { - /* Setup the IRQs */ - rc = request_irq(psc_i2s->irq, &psc_i2s_status_irq, IRQF_SHARED, - "psc-i2s-status", psc_i2s); - rc |= request_irq(psc_i2s->capture.irq, - &psc_i2s_bcom_irq, IRQF_SHARED, - "psc-i2s-capture", &psc_i2s->capture); - rc |= request_irq(psc_i2s->playback.irq, - &psc_i2s_bcom_irq, IRQF_SHARED, - "psc-i2s-playback", &psc_i2s->playback); - if (rc) { - free_irq(psc_i2s->irq, psc_i2s); - free_irq(psc_i2s->capture.irq, - &psc_i2s->capture); - free_irq(psc_i2s->playback.irq, - &psc_i2s->playback); - return -ENODEV; - } - } - - return 0; -} + SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE) static int psc_i2s_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data; + struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data; u32 mode; - dev_dbg(psc_i2s->dev, "%s(substream=%p) p_size=%i p_bytes=%i" + dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i" " periods=%i buffer_size=%i buffer_bytes=%i\n", __func__, substream, params_period_size(params), params_period_bytes(params), params_periods(params), @@ -248,175 +64,15 @@ static int psc_i2s_hw_params(struct snd_pcm_substream *substream, mode = MPC52xx_PSC_SICR_SIM_CODEC_32; break; default: - dev_dbg(psc_i2s->dev, "invalid format\n"); - return -EINVAL; - } - out_be32(&psc_i2s->psc_regs->sicr, psc_i2s->sicr | mode); - - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - - return 0; -} - -static int psc_i2s_hw_free(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - snd_pcm_set_runtime_buffer(substream, NULL); - return 0; -} - -/** - * psc_i2s_trigger: start and stop the DMA transfer. - * - * This function is called by ALSA to start, stop, pause, and resume the DMA - * transfer of data. - */ -static int psc_i2s_trigger(struct snd_pcm_substream *substream, int cmd, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data; - struct snd_pcm_runtime *runtime = substream->runtime; - struct psc_i2s_stream *s; - struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs; - u16 imr; - u8 psc_cmd; - unsigned long flags; - - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) - s = &psc_i2s->capture; - else - s = &psc_i2s->playback; - - dev_dbg(psc_i2s->dev, "psc_i2s_trigger(substream=%p, cmd=%i)" - " stream_id=%i\n", - substream, cmd, substream->pstr->stream); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - s->period_bytes = frames_to_bytes(runtime, - runtime->period_size); - s->period_start = virt_to_phys(runtime->dma_area); - s->period_end = s->period_start + - (s->period_bytes * runtime->periods); - s->period_next_pt = s->period_start; - s->period_current_pt = s->period_start; - s->active = 1; - - /* First; reset everything */ - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) { - out_8(®s->command, MPC52xx_PSC_RST_RX); - out_8(®s->command, MPC52xx_PSC_RST_ERR_STAT); - } else { - out_8(®s->command, MPC52xx_PSC_RST_TX); - out_8(®s->command, MPC52xx_PSC_RST_ERR_STAT); - } - - /* Next, fill up the bestcomm bd queue and enable DMA. - * This will begin filling the PSC's fifo. */ - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) - bcom_gen_bd_rx_reset(s->bcom_task); - else - bcom_gen_bd_tx_reset(s->bcom_task); - while (!bcom_queue_full(s->bcom_task)) - psc_i2s_bcom_enqueue_next_buffer(s); - bcom_enable(s->bcom_task); - - /* Due to errata in the i2s mode; need to line up enabling - * the transmitter with a transition on the frame sync - * line */ - - spin_lock_irqsave(&psc_i2s->lock, flags); - /* first make sure it is low */ - while ((in_8(®s->ipcr_acr.ipcr) & 0x80) != 0) - ; - /* then wait for the transition to high */ - while ((in_8(®s->ipcr_acr.ipcr) & 0x80) == 0) - ; - /* Finally, enable the PSC. - * Receiver must always be enabled; even when we only want - * transmit. (see 15.3.2.3 of MPC5200B User's Guide) */ - psc_cmd = MPC52xx_PSC_RX_ENABLE; - if (substream->pstr->stream == SNDRV_PCM_STREAM_PLAYBACK) - psc_cmd |= MPC52xx_PSC_TX_ENABLE; - out_8(®s->command, psc_cmd); - spin_unlock_irqrestore(&psc_i2s->lock, flags); - - break; - - case SNDRV_PCM_TRIGGER_STOP: - /* Turn off the PSC */ - s->active = 0; - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) { - if (!psc_i2s->playback.active) { - out_8(®s->command, 2 << 4); /* reset rx */ - out_8(®s->command, 3 << 4); /* reset tx */ - out_8(®s->command, 4 << 4); /* reset err */ - } - } else { - out_8(®s->command, 3 << 4); /* reset tx */ - out_8(®s->command, 4 << 4); /* reset err */ - if (!psc_i2s->capture.active) - out_8(®s->command, 2 << 4); /* reset rx */ - } - - bcom_disable(s->bcom_task); - while (!bcom_queue_empty(s->bcom_task)) - bcom_retrieve_buffer(s->bcom_task, NULL, NULL); - - break; - - default: - dev_dbg(psc_i2s->dev, "invalid command\n"); + dev_dbg(psc_dma->dev, "invalid format\n"); return -EINVAL; } - - /* Update interrupt enable settings */ - imr = 0; - if (psc_i2s->playback.active) - imr |= MPC52xx_PSC_IMR_TXEMP; - if (psc_i2s->capture.active) - imr |= MPC52xx_PSC_IMR_ORERR; - out_be16(®s->isr_imr.imr, imr); + out_be32(&psc_dma->psc_regs->sicr, psc_dma->sicr | mode); return 0; } /** - * psc_i2s_shutdown: shutdown the data transfer on a stream - * - * Shutdown the PSC if there are no other substreams open. - */ -static void psc_i2s_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data; - - dev_dbg(psc_i2s->dev, "psc_i2s_shutdown(substream=%p)\n", substream); - - /* - * If this is the last active substream, disable the PSC and release - * the IRQ. - */ - if (!psc_i2s->playback.active && - !psc_i2s->capture.active) { - - /* Disable all interrupts and reset the PSC */ - out_be16(&psc_i2s->psc_regs->isr_imr.imr, 0); - out_8(&psc_i2s->psc_regs->command, 3 << 4); /* reset tx */ - out_8(&psc_i2s->psc_regs->command, 2 << 4); /* reset rx */ - out_8(&psc_i2s->psc_regs->command, 1 << 4); /* reset mode */ - out_8(&psc_i2s->psc_regs->command, 4 << 4); /* reset error */ - - /* Release irqs */ - free_irq(psc_i2s->irq, psc_i2s); - free_irq(psc_i2s->capture.irq, &psc_i2s->capture); - free_irq(psc_i2s->playback.irq, &psc_i2s->playback); - } -} - -/** * psc_i2s_set_sysclk: set the clock frequency and direction * * This function is called by the machine driver to tell us what the clock @@ -433,8 +89,8 @@ static void psc_i2s_shutdown(struct snd_pcm_substream *substream, static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int dir) { - struct psc_i2s *psc_i2s = cpu_dai->private_data; - dev_dbg(psc_i2s->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n", + struct psc_dma *psc_dma = cpu_dai->private_data; + dev_dbg(psc_dma->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n", cpu_dai, dir); return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL; } @@ -452,8 +108,8 @@ static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, */ static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format) { - struct psc_i2s *psc_i2s = cpu_dai->private_data; - dev_dbg(psc_i2s->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n", + struct psc_dma *psc_dma = cpu_dai->private_data; + dev_dbg(psc_dma->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n", cpu_dai, format); return (format == SND_SOC_DAIFMT_I2S) ? 0 : -EINVAL; } @@ -469,16 +125,13 @@ static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format) * psc_i2s_dai_template: template CPU Digital Audio Interface */ static struct snd_soc_dai_ops psc_i2s_dai_ops = { - .startup = psc_i2s_startup, .hw_params = psc_i2s_hw_params, - .hw_free = psc_i2s_hw_free, - .shutdown = psc_i2s_shutdown, - .trigger = psc_i2s_trigger, .set_sysclk = psc_i2s_set_sysclk, .set_fmt = psc_i2s_set_fmt, }; -static struct snd_soc_dai psc_i2s_dai_template = { +struct snd_soc_dai psc_i2s_dai[] = {{ + .name = "I2S", .playback = { .channels_min = 2, .channels_max = 2, @@ -492,223 +145,8 @@ static struct snd_soc_dai psc_i2s_dai_template = { .formats = PSC_I2S_FORMATS, }, .ops = &psc_i2s_dai_ops, -}; - -/* --------------------------------------------------------------------- - * The PSC I2S 'ASoC platform' driver - * - * Can be referenced by an 'ASoC machine' driver - * This driver only deals with the audio bus; it doesn't have any - * interaction with the attached codec - */ - -static const struct snd_pcm_hardware psc_i2s_pcm_hardware = { - .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_BATCH, - .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | - SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE, - .rate_min = 8000, - .rate_max = 48000, - .channels_min = 2, - .channels_max = 2, - .period_bytes_max = 1024 * 1024, - .period_bytes_min = 32, - .periods_min = 2, - .periods_max = 256, - .buffer_bytes_max = 2 * 1024 * 1024, - .fifo_size = 0, -}; - -static int psc_i2s_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data; - struct psc_i2s_stream *s; - - dev_dbg(psc_i2s->dev, "psc_i2s_pcm_open(substream=%p)\n", substream); - - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) - s = &psc_i2s->capture; - else - s = &psc_i2s->playback; - - snd_soc_set_runtime_hwparams(substream, &psc_i2s_pcm_hardware); - - s->stream = substream; - return 0; -} - -static int psc_i2s_pcm_close(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data; - struct psc_i2s_stream *s; - - dev_dbg(psc_i2s->dev, "psc_i2s_pcm_close(substream=%p)\n", substream); - - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) - s = &psc_i2s->capture; - else - s = &psc_i2s->playback; - - s->stream = NULL; - return 0; -} - -static snd_pcm_uframes_t -psc_i2s_pcm_pointer(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data; - struct psc_i2s_stream *s; - dma_addr_t count; - - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) - s = &psc_i2s->capture; - else - s = &psc_i2s->playback; - - count = s->period_current_pt - s->period_start; - - return bytes_to_frames(substream->runtime, count); -} - -static struct snd_pcm_ops psc_i2s_pcm_ops = { - .open = psc_i2s_pcm_open, - .close = psc_i2s_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .pointer = psc_i2s_pcm_pointer, -}; - -static u64 psc_i2s_pcm_dmamask = 0xffffffff; -static int psc_i2s_pcm_new(struct snd_card *card, struct snd_soc_dai *dai, - struct snd_pcm *pcm) -{ - struct snd_soc_pcm_runtime *rtd = pcm->private_data; - size_t size = psc_i2s_pcm_hardware.buffer_bytes_max; - int rc = 0; - - dev_dbg(rtd->socdev->dev, "psc_i2s_pcm_new(card=%p, dai=%p, pcm=%p)\n", - card, dai, pcm); - - if (!card->dev->dma_mask) - card->dev->dma_mask = &psc_i2s_pcm_dmamask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (pcm->streams[0].substream) { - rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev, size, - &pcm->streams[0].substream->dma_buffer); - if (rc) - goto playback_alloc_err; - } - - if (pcm->streams[1].substream) { - rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev, size, - &pcm->streams[1].substream->dma_buffer); - if (rc) - goto capture_alloc_err; - } - - return 0; - - capture_alloc_err: - if (pcm->streams[0].substream) - snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer); - playback_alloc_err: - dev_err(card->dev, "Cannot allocate buffer(s)\n"); - return -ENOMEM; -} - -static void psc_i2s_pcm_free(struct snd_pcm *pcm) -{ - struct snd_soc_pcm_runtime *rtd = pcm->private_data; - struct snd_pcm_substream *substream; - int stream; - - dev_dbg(rtd->socdev->dev, "psc_i2s_pcm_free(pcm=%p)\n", pcm); - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (substream) { - snd_dma_free_pages(&substream->dma_buffer); - substream->dma_buffer.area = NULL; - substream->dma_buffer.addr = 0; - } - } -} - -struct snd_soc_platform psc_i2s_pcm_soc_platform = { - .name = "mpc5200-psc-audio", - .pcm_ops = &psc_i2s_pcm_ops, - .pcm_new = &psc_i2s_pcm_new, - .pcm_free = &psc_i2s_pcm_free, -}; - -/* --------------------------------------------------------------------- - * Sysfs attributes for debugging - */ - -static ssize_t psc_i2s_status_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct psc_i2s *psc_i2s = dev_get_drvdata(dev); - - return sprintf(buf, "status=%.4x sicr=%.8x rfnum=%i rfstat=0x%.4x " - "tfnum=%i tfstat=0x%.4x\n", - in_be16(&psc_i2s->psc_regs->sr_csr.status), - in_be32(&psc_i2s->psc_regs->sicr), - in_be16(&psc_i2s->fifo_regs->rfnum) & 0x1ff, - in_be16(&psc_i2s->fifo_regs->rfstat), - in_be16(&psc_i2s->fifo_regs->tfnum) & 0x1ff, - in_be16(&psc_i2s->fifo_regs->tfstat)); -} - -static int *psc_i2s_get_stat_attr(struct psc_i2s *psc_i2s, const char *name) -{ - if (strcmp(name, "playback_underrun") == 0) - return &psc_i2s->stats.underrun_count; - if (strcmp(name, "capture_overrun") == 0) - return &psc_i2s->stats.overrun_count; - - return NULL; -} - -static ssize_t psc_i2s_stat_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct psc_i2s *psc_i2s = dev_get_drvdata(dev); - int *attrib; - - attrib = psc_i2s_get_stat_attr(psc_i2s, attr->attr.name); - if (!attrib) - return 0; - - return sprintf(buf, "%i\n", *attrib); -} - -static ssize_t psc_i2s_stat_store(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) -{ - struct psc_i2s *psc_i2s = dev_get_drvdata(dev); - int *attrib; - - attrib = psc_i2s_get_stat_attr(psc_i2s, attr->attr.name); - if (!attrib) - return 0; - - *attrib = simple_strtoul(buf, NULL, 0); - return count; -} - -static DEVICE_ATTR(status, 0644, psc_i2s_status_show, NULL); -static DEVICE_ATTR(playback_underrun, 0644, psc_i2s_stat_show, - psc_i2s_stat_store); -static DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show, - psc_i2s_stat_store); +} }; +EXPORT_SYMBOL_GPL(psc_i2s_dai); /* --------------------------------------------------------------------- * OF platform bus binding code: @@ -718,150 +156,65 @@ static DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show, static int __devinit psc_i2s_of_probe(struct of_device *op, const struct of_device_id *match) { - phys_addr_t fifo; - struct psc_i2s *psc_i2s; - struct resource res; - int size, psc_id, irq, rc; - const __be32 *prop; - void __iomem *regs; - - dev_dbg(&op->dev, "probing psc i2s device\n"); - - /* Get the PSC ID */ - prop = of_get_property(op->node, "cell-index", &size); - if (!prop || size < sizeof *prop) - return -ENODEV; - psc_id = be32_to_cpu(*prop); - - /* Fetch the registers and IRQ of the PSC */ - irq = irq_of_parse_and_map(op->node, 0); - if (of_address_to_resource(op->node, 0, &res)) { - dev_err(&op->dev, "Missing reg property\n"); - return -ENODEV; - } - regs = ioremap(res.start, 1 + res.end - res.start); - if (!regs) { - dev_err(&op->dev, "Could not map registers\n"); - return -ENODEV; - } + int rc; + struct psc_dma *psc_dma; + struct mpc52xx_psc __iomem *regs; - /* Allocate and initialize the driver private data */ - psc_i2s = kzalloc(sizeof *psc_i2s, GFP_KERNEL); - if (!psc_i2s) { - iounmap(regs); - return -ENOMEM; - } - spin_lock_init(&psc_i2s->lock); - psc_i2s->irq = irq; - psc_i2s->psc_regs = regs; - psc_i2s->fifo_regs = regs + sizeof *psc_i2s->psc_regs; - psc_i2s->dev = &op->dev; - psc_i2s->playback.psc_i2s = psc_i2s; - psc_i2s->capture.psc_i2s = psc_i2s; - snprintf(psc_i2s->name, sizeof psc_i2s->name, "PSC%u", psc_id+1); - - /* Fill out the CPU DAI structure */ - memcpy(&psc_i2s->dai, &psc_i2s_dai_template, sizeof psc_i2s->dai); - psc_i2s->dai.private_data = psc_i2s; - psc_i2s->dai.name = psc_i2s->name; - psc_i2s->dai.id = psc_id; - - /* Find the address of the fifo data registers and setup the - * DMA tasks */ - fifo = res.start + offsetof(struct mpc52xx_psc, buffer.buffer_32); - psc_i2s->capture.bcom_task = - bcom_psc_gen_bd_rx_init(psc_id, 10, fifo, 512); - psc_i2s->playback.bcom_task = - bcom_psc_gen_bd_tx_init(psc_id, 10, fifo); - if (!psc_i2s->capture.bcom_task || - !psc_i2s->playback.bcom_task) { - dev_err(&op->dev, "Could not allocate bestcomm tasks\n"); - iounmap(regs); - kfree(psc_i2s); - return -ENODEV; + rc = mpc5200_audio_dma_create(op); + if (rc != 0) + return rc; + + rc = snd_soc_register_dais(psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai)); + if (rc != 0) { + pr_err("Failed to register DAI\n"); + return 0; } - /* Disable all interrupts and reset the PSC */ - out_be16(&psc_i2s->psc_regs->isr_imr.imr, 0); - out_8(&psc_i2s->psc_regs->command, 3 << 4); /* reset transmitter */ - out_8(&psc_i2s->psc_regs->command, 2 << 4); /* reset receiver */ - out_8(&psc_i2s->psc_regs->command, 1 << 4); /* reset mode */ - out_8(&psc_i2s->psc_regs->command, 4 << 4); /* reset error */ + psc_dma = dev_get_drvdata(&op->dev); + regs = psc_dma->psc_regs; /* Configure the serial interface mode; defaulting to CODEC8 mode */ - psc_i2s->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S | + psc_dma->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S | MPC52xx_PSC_SICR_CLKPOL; - if (of_get_property(op->node, "fsl,cellslave", NULL)) - psc_i2s->sicr |= MPC52xx_PSC_SICR_CELLSLAVE | - MPC52xx_PSC_SICR_GENCLK; - out_be32(&psc_i2s->psc_regs->sicr, - psc_i2s->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8); + out_be32(&psc_dma->psc_regs->sicr, + psc_dma->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8); /* Check for the codec handle. If it is not present then we * are done */ if (!of_get_property(op->node, "codec-handle", NULL)) return 0; - /* Set up mode register; - * First write: RxRdy (FIFO Alarm) generates rx FIFO irq - * Second write: register Normal mode for non loopback - */ - out_8(&psc_i2s->psc_regs->mode, 0); - out_8(&psc_i2s->psc_regs->mode, 0); - - /* Set the TX and RX fifo alarm thresholds */ - out_be16(&psc_i2s->fifo_regs->rfalarm, 0x100); - out_8(&psc_i2s->fifo_regs->rfcntl, 0x4); - out_be16(&psc_i2s->fifo_regs->tfalarm, 0x100); - out_8(&psc_i2s->fifo_regs->tfcntl, 0x7); - - /* Lookup the IRQ numbers */ - psc_i2s->playback.irq = - bcom_get_task_irq(psc_i2s->playback.bcom_task); - psc_i2s->capture.irq = - bcom_get_task_irq(psc_i2s->capture.bcom_task); - - /* Save what we've done so it can be found again later */ - dev_set_drvdata(&op->dev, psc_i2s); - - /* Register the SYSFS files */ - rc = device_create_file(psc_i2s->dev, &dev_attr_status); - rc |= device_create_file(psc_i2s->dev, &dev_attr_capture_overrun); - rc |= device_create_file(psc_i2s->dev, &dev_attr_playback_underrun); - if (rc) - dev_info(psc_i2s->dev, "error creating sysfs files\n"); - - snd_soc_register_platform(&psc_i2s_pcm_soc_platform); - - /* Tell the ASoC OF helpers about it */ - of_snd_soc_register_platform(&psc_i2s_pcm_soc_platform, op->node, - &psc_i2s->dai); + /* Due to errata in the dma mode; need to line up enabling + * the transmitter with a transition on the frame sync + * line */ + + /* first make sure it is low */ + while ((in_8(®s->ipcr_acr.ipcr) & 0x80) != 0) + ; + /* then wait for the transition to high */ + while ((in_8(®s->ipcr_acr.ipcr) & 0x80) == 0) + ; + /* Finally, enable the PSC. + * Receiver must always be enabled; even when we only want + * transmit. (see 15.3.2.3 of MPC5200B User's Guide) */ + + /* Go */ + out_8(&psc_dma->psc_regs->command, + MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE); return 0; + } static int __devexit psc_i2s_of_remove(struct of_device *op) { - struct psc_i2s *psc_i2s = dev_get_drvdata(&op->dev); - - dev_dbg(&op->dev, "psc_i2s_remove()\n"); - - snd_soc_unregister_platform(&psc_i2s_pcm_soc_platform); - - bcom_gen_bd_rx_release(psc_i2s->capture.bcom_task); - bcom_gen_bd_tx_release(psc_i2s->playback.bcom_task); - - iounmap(psc_i2s->psc_regs); - iounmap(psc_i2s->fifo_regs); - kfree(psc_i2s); - dev_set_drvdata(&op->dev, NULL); - - return 0; + return mpc5200_audio_dma_destroy(op); } /* Match table for of_platform binding */ static struct of_device_id psc_i2s_match[] __devinitdata = { { .compatible = "fsl,mpc5200-psc-i2s", }, + { .compatible = "fsl,mpc5200b-psc-i2s", }, {} }; MODULE_DEVICE_TABLE(of, psc_i2s_match); @@ -892,4 +245,7 @@ static void __exit psc_i2s_exit(void) } module_exit(psc_i2s_exit); +MODULE_AUTHOR("Grant Likely "); +MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/fsl/mpc5200_psc_i2s.h b/sound/soc/fsl/mpc5200_psc_i2s.h new file mode 100644 index 0000000..ce55e07 --- /dev/null +++ b/sound/soc/fsl/mpc5200_psc_i2s.h @@ -0,0 +1,12 @@ +/* + * Freescale MPC5200 PSC in I2S mode + * ALSA SoC Digital Audio Interface (DAI) driver + * + */ + +#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__ +#define __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__ + +extern struct snd_soc_dai psc_i2s_dai[]; + +#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__ */ diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c new file mode 100644 index 0000000..8766f7a --- /dev/null +++ b/sound/soc/fsl/pcm030-audio-fabric.c @@ -0,0 +1,90 @@ +/* + * Phytec pcm030 driver for the PSC of the Freescale MPC52xx + * configured as AC97 interface + * + * Copyright 2008 Jon Smirl, Digispeaker + * Author: Jon Smirl + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "mpc5200_dma.h" +#include "mpc5200_psc_ac97.h" +#include "../codecs/wm9712.h" + +static struct snd_soc_device device; +static struct snd_soc_card card; + +static struct snd_soc_dai_link pcm030_fabric_dai[] = { +{ + .name = "AC97", + .stream_name = "AC97 Analog", + .codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI], + .cpu_dai = &psc_ac97_dai[MPC5200_AC97_NORMAL], +}, +{ + .name = "AC97", + .stream_name = "AC97 IEC958", + .codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX], + .cpu_dai = &psc_ac97_dai[MPC5200_AC97_SPDIF], +}, +}; + +static __init int pcm030_fabric_init(void) +{ + struct platform_device *pdev; + int rc; + + if (!machine_is_compatible("phytec,pcm030")) + return -ENODEV; + + card.platform = &mpc5200_audio_dma_platform; + card.name = "pcm030"; + card.dai_link = pcm030_fabric_dai; + card.num_links = ARRAY_SIZE(pcm030_fabric_dai); + + device.card = &card; + device.codec_dev = &soc_codec_dev_wm9712; + + pdev = platform_device_alloc("soc-audio", 1); + if (!pdev) { + pr_err("pcm030_fabric_init: platform_device_alloc() failed\n"); + return -ENODEV; + } + + platform_set_drvdata(pdev, &device); + device.dev = &pdev->dev; + + rc = platform_device_add(pdev); + if (rc) { + pr_err("pcm030_fabric_init: platform_device_add() failed\n"); + return -ENODEV; + } + return 0; +} + +module_init(pcm030_fabric_init); + + +MODULE_AUTHOR("Jon Smirl "); +MODULE_DESCRIPTION(DRV_NAME ": mpc5200 pcm030 fabric driver"); +MODULE_LICENSE("GPL"); + diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index 675732e..b771238 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -39,6 +39,14 @@ config SND_OMAP_SOC_OMAP2EVM help Say Y if you want to add support for SoC audio on the omap2evm board. +config SND_OMAP_SOC_OMAP3EVM + tristate "SoC Audio support for OMAP3EVM board" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the omap3evm board. + config SND_OMAP_SOC_SDP3430 tristate "SoC Audio support for Texas Instruments SDP3430" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 0c9e4ac..a37f498 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -10,6 +10,7 @@ snd-soc-n810-objs := n810.o snd-soc-osk5912-objs := osk5912.o snd-soc-overo-objs := overo.o snd-soc-omap2evm-objs := omap2evm.o +snd-soc-omap3evm-objs := omap3evm.o snd-soc-sdp3430-objs := sdp3430.o snd-soc-omap3pandora-objs := omap3pandora.o snd-soc-omap3beagle-objs := omap3beagle.o @@ -18,6 +19,7 @@ obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o +obj-$(CONFIG_MACH_OMAP3EVM) += snd-soc-omap3evm.o obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 91ef179..b60b1df 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -383,10 +383,9 @@ static int __init n810_soc_init(void) clk_set_parent(sys_clkout2_src, func96m_clk); clk_set_rate(sys_clkout2, 12000000); - if (gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) - BUG(); - if (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0) - BUG(); + BUG_ON((gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) || + (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0)); + gpio_direction_output(N810_HEADSET_AMP_GPIO, 0); gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0); diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 9126142..a5d46a7 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -215,8 +215,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data); struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs; int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id; - int wlen, channels; + int wlen, channels, wpf; unsigned long port; + unsigned int format; if (cpu_class_is_omap1()) { dma = omap1_dma_reqs[bus_id][substream->stream]; @@ -244,18 +245,24 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, return 0; } - channels = params_channels(params); + format = mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK; + wpf = channels = params_channels(params); switch (channels) { case 2: - /* Use dual-phase frames */ - regs->rcr2 |= RPHASE; - regs->xcr2 |= XPHASE; + if (format == SND_SOC_DAIFMT_I2S) { + /* Use dual-phase frames */ + regs->rcr2 |= RPHASE; + regs->xcr2 |= XPHASE; + /* Set 1 word per (McBSP) frame for phase1 and phase2 */ + wpf--; + regs->rcr2 |= RFRLEN2(wpf - 1); + regs->xcr2 |= XFRLEN2(wpf - 1); + } case 1: - /* Set 1 word per (McBSP) frame */ - regs->rcr2 |= RFRLEN2(1 - 1); - regs->rcr1 |= RFRLEN1(1 - 1); - regs->xcr2 |= XFRLEN2(1 - 1); - regs->xcr1 |= XFRLEN1(1 - 1); + case 4: + /* Set word per (McBSP) frame for phase1 */ + regs->rcr1 |= RFRLEN1(wpf - 1); + regs->xcr1 |= XFRLEN1(wpf - 1); break; default: /* Unsupported number of channels */ @@ -277,11 +284,12 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, } /* Set FS period and length in terms of bit clock periods */ - switch (mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + switch (format) { case SND_SOC_DAIFMT_I2S: - regs->srgr2 |= FPER(wlen * 2 - 1); + regs->srgr2 |= FPER(wlen * channels - 1); regs->srgr1 |= FWID(wlen - 1); break; + case SND_SOC_DAIFMT_DSP_A: case SND_SOC_DAIFMT_DSP_B: regs->srgr2 |= FPER(wlen * channels - 1); regs->srgr1 |= FWID(0); @@ -326,6 +334,13 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, regs->rcr2 |= RDATDLY(1); regs->xcr2 |= XDATDLY(1); break; + case SND_SOC_DAIFMT_DSP_A: + /* 1-bit data delay */ + regs->rcr2 |= RDATDLY(1); + regs->xcr2 |= XDATDLY(1); + /* Invert FS polarity configuration */ + temp_fmt ^= SND_SOC_DAIFMT_NB_IF; + break; case SND_SOC_DAIFMT_DSP_B: /* 0-bit data delay */ regs->rcr2 |= RDATDLY(0); @@ -492,13 +507,13 @@ static struct snd_soc_dai_ops omap_mcbsp_dai_ops = { .id = (link_id), \ .playback = { \ .channels_min = 1, \ - .channels_max = 2, \ + .channels_max = 4, \ .rates = OMAP_MCBSP_RATES, \ .formats = SNDRV_PCM_FMTBIT_S16_LE, \ }, \ .capture = { \ .channels_min = 1, \ - .channels_max = 2, \ + .channels_max = 4, \ .rates = OMAP_MCBSP_RATES, \ .formats = SNDRV_PCM_FMTBIT_S16_LE, \ }, \ diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 07cf7f4..6454e15 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -87,8 +87,10 @@ static int omap_pcm_hw_params(struct snd_pcm_substream *substream, struct omap_pcm_dma_data *dma_data = rtd->dai->cpu_dai->dma_data; int err = 0; + /* return if this is a bufferless transfer e.g. + * codec <--> BT codec or GSM modem -- lg FIXME */ if (!dma_data) - return -ENODEV; + return 0; snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); runtime->dma_bytes = params_buffer_bytes(params); @@ -134,6 +136,11 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream) struct omap_pcm_dma_data *dma_data = prtd->dma_data; struct omap_dma_channel_params dma_params; + /* return if this is a bufferless transfer e.g. + * codec <--> BT codec or GSM modem -- lg FIXME */ + if (!prtd->dma_data) + return 0; + memset(&dma_params, 0, sizeof(dma_params)); /* * Note: Regardless of interface data formats supported by OMAP McBSP diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c index 0c2322d..027e1a4 100644 --- a/sound/soc/omap/omap2evm.c +++ b/sound/soc/omap/omap2evm.c @@ -86,7 +86,7 @@ static struct snd_soc_dai_link omap2evm_dai = { .name = "TWL4030", .stream_name = "TWL4030", .cpu_dai = &omap_mcbsp_dai[0], - .codec_dai = &twl4030_dai, + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], .ops = &omap2evm_ops, }; diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c index fd24a4a..b0cff9f 100644 --- a/sound/soc/omap/omap3beagle.c +++ b/sound/soc/omap/omap3beagle.c @@ -41,23 +41,33 @@ static int omap3beagle_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + unsigned int fmt; int ret; + switch (params_channels(params)) { + case 2: /* Stereo I2S mode */ + fmt = SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM; + break; + case 4: /* Four channel TDM mode */ + fmt = SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_IB_NF | + SND_SOC_DAIFMT_CBM_CFM; + break; + default: + return -EINVAL; + } + /* Set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); + ret = snd_soc_dai_set_fmt(codec_dai, fmt); if (ret < 0) { printk(KERN_ERR "can't set codec DAI configuration\n"); return ret; } /* Set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); if (ret < 0) { printk(KERN_ERR "can't set cpu DAI configuration\n"); return ret; @@ -83,7 +93,7 @@ static struct snd_soc_dai_link omap3beagle_dai = { .name = "TWL4030", .stream_name = "TWL4030", .cpu_dai = &omap_mcbsp_dai[0], - .codec_dai = &twl4030_dai, + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], .ops = &omap3beagle_ops, }; diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c new file mode 100644 index 0000000..9114c26 --- /dev/null +++ b/sound/soc/omap/omap3evm.c @@ -0,0 +1,147 @@ +/* + * omap3evm.c -- ALSA SoC support for OMAP3 EVM + * + * Author: Anuj Aggarwal + * + * Based on sound/soc/omap/beagle.c by Steve Sakoman + * + * Copyright (C) 2008 Texas Instruments, Incorporated + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/twl4030.h" + +static int omap3evm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret; + + /* Set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) { + printk(KERN_ERR "Can't set codec DAI configuration\n"); + return ret; + } + + /* Set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) { + printk(KERN_ERR "Can't set cpu DAI configuration\n"); + return ret; + } + + /* Set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, + SND_SOC_CLOCK_IN); + if (ret < 0) { + printk(KERN_ERR "Can't set codec system clock\n"); + return ret; + } + + return 0; +} + +static struct snd_soc_ops omap3evm_ops = { + .hw_params = omap3evm_hw_params, +}; + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link omap3evm_dai = { + .name = "TWL4030", + .stream_name = "TWL4030", + .cpu_dai = &omap_mcbsp_dai[0], + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], + .ops = &omap3evm_ops, +}; + +/* Audio machine driver */ +static struct snd_soc_card snd_soc_omap3evm = { + .name = "omap3evm", + .platform = &omap_soc_platform, + .dai_link = &omap3evm_dai, + .num_links = 1, +}; + +/* Audio subsystem */ +static struct snd_soc_device omap3evm_snd_devdata = { + .card = &snd_soc_omap3evm, + .codec_dev = &soc_codec_dev_twl4030, +}; + +static struct platform_device *omap3evm_snd_device; + +static int __init omap3evm_soc_init(void) +{ + int ret; + + if (!machine_is_omap3evm()) { + pr_err("Not OMAP3 EVM!\n"); + return -ENODEV; + } + pr_info("OMAP3 EVM SoC init\n"); + + omap3evm_snd_device = platform_device_alloc("soc-audio", -1); + if (!omap3evm_snd_device) { + printk(KERN_ERR "Platform device allocation failed\n"); + return -ENOMEM; + } + + platform_set_drvdata(omap3evm_snd_device, &omap3evm_snd_devdata); + omap3evm_snd_devdata.dev = &omap3evm_snd_device->dev; + *(unsigned int *)omap3evm_dai.cpu_dai->private_data = 1; + + ret = platform_device_add(omap3evm_snd_device); + if (ret) + goto err1; + + return 0; + +err1: + printk(KERN_ERR "Unable to add platform device\n"); + platform_device_put(omap3evm_snd_device); + + return ret; +} + +static void __exit omap3evm_soc_exit(void) +{ + platform_device_unregister(omap3evm_snd_device); +} + +module_init(omap3evm_soc_init); +module_exit(omap3evm_soc_exit); + +MODULE_AUTHOR("Anuj Aggarwal "); +MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM"); +MODULE_LICENSE("GPLv2"); diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c index fe282d4..ad219aa 100644 --- a/sound/soc/omap/omap3pandora.c +++ b/sound/soc/omap/omap3pandora.c @@ -228,14 +228,14 @@ static struct snd_soc_dai_link omap3pandora_dai[] = { .name = "PCM1773", .stream_name = "HiFi Out", .cpu_dai = &omap_mcbsp_dai[0], - .codec_dai = &twl4030_dai, + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], .ops = &omap3pandora_out_ops, .init = omap3pandora_out_init, }, { .name = "TWL4030", .stream_name = "Line/Mic In", .cpu_dai = &omap_mcbsp_dai[1], - .codec_dai = &twl4030_dai, + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], .ops = &omap3pandora_in_ops, .init = omap3pandora_in_init, } diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c index a72dc4e..ec4f8fd 100644 --- a/sound/soc/omap/overo.c +++ b/sound/soc/omap/overo.c @@ -83,7 +83,7 @@ static struct snd_soc_dai_link overo_dai = { .name = "TWL4030", .stream_name = "TWL4030", .cpu_dai = &omap_mcbsp_dai[0], - .codec_dai = &twl4030_dai, + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], .ops = &overo_ops, }; diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index 10f1c86..b719e5d 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -84,6 +84,49 @@ static struct snd_soc_ops sdp3430_ops = { .hw_params = sdp3430_hw_params, }; +static int sdp3430_hw_voice_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret; + + /* Set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_IB_NF | + SND_SOC_DAIFMT_CBS_CFM); + if (ret) { + printk(KERN_ERR "can't set codec DAI configuration\n"); + return ret; + } + + /* Set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_IB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) { + printk(KERN_ERR "can't set cpu DAI configuration\n"); + return ret; + } + + /* Set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, + SND_SOC_CLOCK_IN); + if (ret < 0) { + printk(KERN_ERR "can't set codec system clock\n"); + return ret; + } + + return 0; +} + +static struct snd_soc_ops sdp3430_voice_ops = { + .hw_params = sdp3430_hw_voice_params, +}; + /* Headset jack */ static struct snd_soc_jack hs_jack; @@ -192,28 +235,58 @@ static int sdp3430_twl4030_init(struct snd_soc_codec *codec) return ret; } +static int sdp3430_twl4030_voice_init(struct snd_soc_codec *codec) +{ + unsigned short reg; + + /* Enable voice interface */ + reg = codec->read(codec, TWL4030_REG_VOICE_IF); + reg |= TWL4030_VIF_DIN_EN | TWL4030_VIF_DOUT_EN | TWL4030_VIF_EN; + codec->write(codec, TWL4030_REG_VOICE_IF, reg); + + return 0; +} + + /* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link sdp3430_dai = { - .name = "TWL4030", - .stream_name = "TWL4030", - .cpu_dai = &omap_mcbsp_dai[0], - .codec_dai = &twl4030_dai, - .init = sdp3430_twl4030_init, - .ops = &sdp3430_ops, +static struct snd_soc_dai_link sdp3430_dai[] = { + { + .name = "TWL4030 I2S", + .stream_name = "TWL4030 Audio", + .cpu_dai = &omap_mcbsp_dai[0], + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], + .init = sdp3430_twl4030_init, + .ops = &sdp3430_ops, + }, + { + .name = "TWL4030 PCM", + .stream_name = "TWL4030 Voice", + .cpu_dai = &omap_mcbsp_dai[1], + .codec_dai = &twl4030_dai[TWL4030_DAI_VOICE], + .init = sdp3430_twl4030_voice_init, + .ops = &sdp3430_voice_ops, + }, }; /* Audio machine driver */ static struct snd_soc_card snd_soc_sdp3430 = { .name = "SDP3430", .platform = &omap_soc_platform, - .dai_link = &sdp3430_dai, - .num_links = 1, + .dai_link = sdp3430_dai, + .num_links = ARRAY_SIZE(sdp3430_dai), +}; + +/* twl4030 setup */ +static struct twl4030_setup_data twl4030_setup = { + .ramp_delay_value = 3, + .sysclk = 26000, }; /* Audio subsystem */ static struct snd_soc_device sdp3430_snd_devdata = { .card = &snd_soc_sdp3430, .codec_dev = &soc_codec_dev_twl4030, + .codec_data = &twl4030_setup, }; static struct platform_device *sdp3430_snd_device; @@ -236,7 +309,8 @@ static int __init sdp3430_soc_init(void) platform_set_drvdata(sdp3430_snd_device, &sdp3430_snd_devdata); sdp3430_snd_devdata.dev = &sdp3430_snd_device->dev; - *(unsigned int *)sdp3430_dai.cpu_dai->private_data = 1; /* McBSP2 */ + *(unsigned int *)sdp3430_dai[0].cpu_dai->private_data = 1; /* McBSP2 */ + *(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */ ret = platform_device_add(sdp3430_snd_device); if (ret) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index ad8a10f..6375b4e 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -89,22 +89,23 @@ config SND_PXA2XX_SOC_E800 Toshiba e800 PDA config SND_PXA2XX_SOC_EM_X270 - tristate "SoC Audio support for CompuLab EM-x270" + tristate "SoC Audio support for CompuLab EM-x270, eXeda and CM-X300" depends on SND_PXA2XX_SOC && MACH_EM_X270 select SND_PXA2XX_SOC_AC97 select SND_SOC_WM9712 help Say Y if you want to add support for SoC audio on - CompuLab EM-x270. + CompuLab EM-x270, eXeda and CM-X300 machines. config SND_PXA2XX_SOC_PALM27X - bool "SoC Audio support for Palm T|X, T5 and LifeDrive" - depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || MACH_PALMT5) + bool "SoC Audio support for Palm T|X, T5, E2 and LifeDrive" + depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \ + MACH_PALMT5 || MACH_PALMTE2) select SND_PXA2XX_SOC_AC97 select SND_SOC_WM9712 help Say Y if you want to add support for SoC audio on - Palm T|X, T5 or LifeDrive handheld computer. + Palm T|X, T5, E2 or LifeDrive handheld computer. config SND_SOC_ZYLONITE tristate "SoC Audio support for Marvell Zylonite" @@ -134,3 +135,12 @@ config SND_PXA2XX_SOC_MIOA701 help Say Y if you want to add support for SoC audio on the MIO A701. + +config SND_PXA2XX_SOC_IMOTE2 + tristate "SoC Audio support for IMote 2" + depends on SND_PXA2XX_SOC && MACH_INTELMOTE2 + select SND_PXA2XX_SOC_I2S + select SND_SOC_WM8940 + help + Say Y if you want to add support for SoC audio on the + IMote 2. diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 4b90c3c..6e096b4 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -22,6 +22,7 @@ snd-soc-palm27x-objs := palm27x.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o snd-soc-mioa701-objs := mioa701_wm9713.o +snd-soc-imote2-objs := imote2.o obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o @@ -35,3 +36,4 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o +obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c index 949be9c..f4756e4 100644 --- a/sound/soc/pxa/em-x270.c +++ b/sound/soc/pxa/em-x270.c @@ -1,7 +1,7 @@ /* - * em-x270.c -- SoC audio for EM-X270 + * SoC audio driver for EM-X270, eXeda and CM-X300 * - * Copyright 2007 CompuLab, Ltd. + * Copyright 2007, 2009 CompuLab, Ltd. * * Author: Mike Rapoport * @@ -68,7 +68,8 @@ static int __init em_x270_init(void) { int ret; - if (!machine_is_em_x270()) + if (!(machine_is_em_x270() || machine_is_exeda() + || machine_is_cm_x300())) return -ENODEV; em_x270_snd_device = platform_device_alloc("soc-audio", -1); @@ -95,5 +96,5 @@ module_exit(em_x270_exit); /* Module information */ MODULE_AUTHOR("Mike Rapoport"); -MODULE_DESCRIPTION("ALSA SoC EM-X270"); +MODULE_DESCRIPTION("ALSA SoC EM-X270, eXeda and CM-X300"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/pxa/imote2.c b/sound/soc/pxa/imote2.c new file mode 100644 index 0000000..405587a --- /dev/null +++ b/sound/soc/pxa/imote2.c @@ -0,0 +1,114 @@ + +#include +#include + +#include + +#include "../codecs/wm8940.h" +#include "pxa2xx-i2s.h" +#include "pxa2xx-pcm.h" + +static int imote2_asoc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + unsigned int clk = 0; + int ret; + + switch (params_rate(params)) { + case 8000: + case 16000: + case 48000: + case 96000: + clk = 12288000; + break; + case 11025: + case 22050: + case 44100: + clk = 11289600; + break; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* CPU should be clock master */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + /* set the I2S system clock as input (unused) */ + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, clk, + SND_SOC_CLOCK_OUT); + + return ret; +} + +static struct snd_soc_ops imote2_asoc_ops = { + .hw_params = imote2_asoc_hw_params, +}; + +static struct snd_soc_dai_link imote2_dai = { + .name = "WM8940", + .stream_name = "WM8940", + .cpu_dai = &pxa_i2s_dai, + .codec_dai = &wm8940_dai, + .ops = &imote2_asoc_ops, +}; + +static struct snd_soc_card snd_soc_imote2 = { + .name = "Imote2", + .platform = &pxa2xx_soc_platform, + .dai_link = &imote2_dai, + .num_links = 1, +}; + +static struct snd_soc_device imote2_snd_devdata = { + .card = &snd_soc_imote2, + .codec_dev = &soc_codec_dev_wm8940, +}; + +static struct platform_device *imote2_snd_device; + +static int __init imote2_asoc_init(void) +{ + int ret; + + if (!machine_is_intelmote2()) + return -ENODEV; + imote2_snd_device = platform_device_alloc("soc-audio", -1); + if (!imote2_snd_device) + return -ENOMEM; + + platform_set_drvdata(imote2_snd_device, &imote2_snd_devdata); + imote2_snd_devdata.dev = &imote2_snd_device->dev; + ret = platform_device_add(imote2_snd_device); + if (ret) + platform_device_put(imote2_snd_device); + + return ret; +} +module_init(imote2_asoc_init); + +static void __exit imote2_asoc_exit(void) +{ + platform_device_unregister(imote2_snd_device); +} +module_exit(imote2_asoc_exit); + +MODULE_AUTHOR("Jonathan Cameron"); +MODULE_DESCRIPTION("ALSA SoC Imote 2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index 0625c34..c89a3cd 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -106,7 +106,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream, /* 513156 Hz ~= _2_ * 8000 Hz * 32 (+0.23%) */ acds = PXA_SSP_CLK_AUDIO_DIV_16; break; - case 32: + default: /* 32 */ /* 1026312 Hz ~= _2_ * 8000 Hz * 64 (+0.23%) */ acds = PXA_SSP_CLK_AUDIO_DIV_8; } @@ -118,7 +118,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream, /* 351375 Hz ~= 11025 Hz * 32 (-0.41%) */ acds = PXA_SSP_CLK_AUDIO_DIV_4; break; - case 32: + default: /* 32 */ /* 702750 Hz ~= 11025 Hz * 64 (-0.41%) */ acds = PXA_SSP_CLK_AUDIO_DIV_2; } @@ -130,7 +130,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream, /* 702750 Hz ~= 22050 Hz * 32 (-0.41%) */ acds = PXA_SSP_CLK_AUDIO_DIV_2; break; - case 32: + default: /* 32 */ /* 1405500 Hz ~= 22050 Hz * 64 (-0.41%) */ acds = PXA_SSP_CLK_AUDIO_DIV_1; } @@ -142,7 +142,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream, /* 1405500 Hz ~= 44100 Hz * 32 (-0.41%) */ acds = PXA_SSP_CLK_AUDIO_DIV_2; break; - case 32: + default: /* 32 */ /* 2811000 Hz ~= 44100 Hz * 64 (-0.41%) */ acds = PXA_SSP_CLK_AUDIO_DIV_1; } @@ -154,19 +154,20 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream, /* 1529375 Hz ~= 48000 Hz * 32 (-0.44%) */ acds = PXA_SSP_CLK_AUDIO_DIV_2; break; - case 32: + default: /* 32 */ /* 3058750 Hz ~= 48000 Hz * 64 (-0.44%) */ acds = PXA_SSP_CLK_AUDIO_DIV_1; } break; case 96000: + default: acps = 12235000; switch (width) { case 16: /* 3058750 Hz ~= 96000 Hz * 32 (-0.44%) */ acds = PXA_SSP_CLK_AUDIO_DIV_1; break; - case 32: + default: /* 32 */ /* 6117500 Hz ~= 96000 Hz * 64 (-0.44%) */ acds = PXA_SSP_CLK_AUDIO_DIV_2; div4 = PXA_SSP_CLK_SCDB_1; diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index 44fcc4e..e6102fd 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -205,7 +205,7 @@ static int palm27x_asoc_probe(struct platform_device *pdev) int ret; if (!(machine_is_palmtx() || machine_is_palmt5() || - machine_is_palmld())) + machine_is_palmld() || machine_is_palmte2())) return -ENODEV; if (pdev->dev.platform_data) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 286be31..19c4540 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -50,139 +50,6 @@ struct ssp_priv { #endif }; -#define PXA2xx_SSP1_BASE 0x41000000 -#define PXA27x_SSP2_BASE 0x41700000 -#define PXA27x_SSP3_BASE 0x41900000 -#define PXA3xx_SSP4_BASE 0x41a00000 - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = { - .name = "SSP1 PCM Mono out", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(14), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = { - .name = "SSP1 PCM Mono in", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(13), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = { - .name = "SSP1 PCM Stereo out", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(14), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = { - .name = "SSP1 PCM Stereo in", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(13), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = { - .name = "SSP2 PCM Mono out", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(16), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = { - .name = "SSP2 PCM Mono in", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(15), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = { - .name = "SSP2 PCM Stereo out", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(16), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = { - .name = "SSP2 PCM Stereo in", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(15), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = { - .name = "SSP3 PCM Mono out", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = { - .name = "SSP3 PCM Mono in", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = { - .name = "SSP3 PCM Stereo out", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = { - .name = "SSP3 PCM Stereo in", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = { - .name = "SSP4 PCM Mono out", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = { - .name = "SSP4 PCM Mono in", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = { - .name = "SSP4 PCM Stereo out", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = { - .name = "SSP4 PCM Stereo in", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - static void dump_registers(struct ssp_device *ssp) { dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", @@ -194,25 +61,33 @@ static void dump_registers(struct ssp_device *ssp) ssp_read_reg(ssp, SSACD)); } -static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = { - { - &pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in, - &pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in, - }, - { - &pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in, - &pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in, - }, - { - &pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in, - &pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in, - }, - { - &pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in, - &pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in, - }, +struct pxa2xx_pcm_dma_data { + struct pxa2xx_pcm_dma_params params; + char name[20]; }; +static struct pxa2xx_pcm_dma_params * +ssp_get_dma_params(struct ssp_device *ssp, int width4, int out) +{ + struct pxa2xx_pcm_dma_data *dma; + + dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL); + if (dma == NULL) + return NULL; + + snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id, + width4 ? "32-bit" : "16-bit", out ? "out" : "in"); + + dma->params.name = dma->name; + dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx); + dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) : + (DCMD_INCTRGADDR | DCMD_FLOWSRC)) | + (width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16; + dma->params.dev_addr = ssp->phys_base + SSDR; + + return &dma->params; +} + static int pxa_ssp_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -227,6 +102,11 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream, clk_enable(priv->dev.ssp->clk); ssp_disable(&priv->dev); } + + if (cpu_dai->dma_data) { + kfree(cpu_dai->dma_data); + cpu_dai->dma_data = NULL; + } return ret; } @@ -241,6 +121,11 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, ssp_disable(&priv->dev); clk_disable(priv->dev.ssp->clk); } + + if (cpu_dai->dma_data) { + kfree(cpu_dai->dma_data); + cpu_dai->dma_data = NULL; + } } #ifdef CONFIG_PM @@ -323,7 +208,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); dev_dbg(&ssp->pdev->dev, - "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n", + "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n", cpu_dai->id, clk_id, freq); switch (clk_id) { @@ -472,7 +357,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, ssacd |= (0x6 << 4); dev_dbg(&ssp->pdev->dev, - "Using SSACDD %x to supply %dHz\n", + "Using SSACDD %x to supply %uHz\n", val, freq_out); break; } @@ -589,7 +474,10 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, case SND_SOC_DAIFMT_NB_IF: break; case SND_SOC_DAIFMT_IB_IF: - sspsp |= SSPSP_SCMODE(3); + sspsp |= SSPSP_SCMODE(2); + break; + case SND_SOC_DAIFMT_IB_NF: + sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP; break; default: return -EINVAL; @@ -606,7 +494,13 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, case SND_SOC_DAIFMT_NB_NF: sspsp |= SSPSP_SFRMP; break; + case SND_SOC_DAIFMT_NB_IF: + break; case SND_SOC_DAIFMT_IB_IF: + sspsp |= SSPSP_SCMODE(2); + break; + case SND_SOC_DAIFMT_IB_NF: + sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP; break; default: return -EINVAL; @@ -644,25 +538,23 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; struct ssp_priv *priv = cpu_dai->private_data; struct ssp_device *ssp = priv->dev.ssp; - int dma = 0, chn = params_channels(params); + int chn = params_channels(params); u32 sscr0; u32 sspsp; int width = snd_pcm_format_physical_width(params_format(params)); int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf; - /* select correct DMA params */ - if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) - dma = 1; /* capture DMA offset is 1,3 */ + /* generate correct DMA params */ + if (cpu_dai->dma_data) + kfree(cpu_dai->dma_data); + /* Network mode with one active slot (ttsa == 1) can be used * to force 16-bit frame width on the wire (for S16_LE), even * with two channels. Use 16-bit DMA transfers for this case. */ - if (((chn == 2) && (ttsa != 1)) || (width == 32)) - dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */ - - cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma]; - - dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma); + cpu_dai->dma_data = ssp_get_dma_params(ssp, + ((chn == 2) && (ttsa != 1)) || (width == 32), + substream->stream == SNDRV_PCM_STREAM_PLAYBACK); /* we can only change the settings if the port is not in use */ if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 2f4b6e4..4743e26 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -106,10 +106,8 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream, if (IS_ERR(clk_i2s)) return PTR_ERR(clk_i2s); - if (!cpu_dai->active) { - SACR0 |= SACR0_RST; + if (!cpu_dai->active) SACR0 = 0; - } return 0; } @@ -178,9 +176,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream, /* is port used by another stream */ if (!(SACR0 & SACR0_ENB)) { - SACR0 = 0; - SACR1 = 0; if (pxa_i2s.master) SACR0 |= SACR0_BCKD; @@ -226,6 +222,10 @@ static int pxa2xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd, switch (cmd) { case SNDRV_PCM_TRIGGER_START: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + SACR1 &= ~SACR1_DRPL; + else + SACR1 &= ~SACR1_DREC; SACR0 |= SACR0_ENB; break; case SNDRV_PCM_TRIGGER_RESUME: @@ -252,21 +252,16 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream, SAIMR &= ~SAIMR_RFS; } - if (SACR1 & (SACR1_DREC | SACR1_DRPL)) { + if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) { SACR0 &= ~SACR0_ENB; pxa_i2s_wait(); clk_disable(clk_i2s); } - - clk_put(clk_i2s); } #ifdef CONFIG_PM static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai) { - if (!dai->active) - return 0; - /* store registers */ pxa_i2s.sacr0 = SACR0; pxa_i2s.sacr1 = SACR1; @@ -281,16 +276,14 @@ static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai) static int pxa2xx_i2s_resume(struct snd_soc_dai *dai) { - if (!dai->active) - return 0; - pxa_i2s_wait(); - SACR0 = pxa_i2s.sacr0 &= ~SACR0_ENB; + SACR0 = pxa_i2s.sacr0 & ~SACR0_ENB; SACR1 = pxa_i2s.sacr1; SAIMR = pxa_i2s.saimr; SADIV = pxa_i2s.sadiv; - SACR0 |= SACR0_ENB; + + SACR0 = pxa_i2s.sacr0; return 0; } @@ -329,6 +322,7 @@ struct snd_soc_dai pxa_i2s_dai = { .rates = PXA2XX_I2S_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, .ops = &pxa_i2s_dai_ops, + .symmetric_rates = 1, }; EXPORT_SYMBOL_GPL(pxa_i2s_dai); @@ -346,6 +340,19 @@ static int pxa2xx_i2s_probe(struct platform_device *dev) if (ret != 0) clk_put(clk_i2s); + /* + * PXA Developer's Manual: + * If SACR0[ENB] is toggled in the middle of a normal operation, + * the SACR0[RST] bit must also be set and cleared to reset all + * I2S controller registers. + */ + SACR0 = SACR0_RST; + SACR0 = 0; + /* Make sure RPL and REC are disabled */ + SACR1 = SACR1_DRPL | SACR1_DREC; + /* Along with FIFO servicing */ + SAIMR &= ~(SAIMR_RFS | SAIMR_TFS); + return ret; } diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 289fadf..906709e 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -345,9 +345,11 @@ static void lm4857_write_regs(void) static int lm4857_get_reg(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - int reg = kcontrol->private_value & 0xFF; - int shift = (kcontrol->private_value >> 8) & 0x0F; - int mask = (kcontrol->private_value >> 16) & 0xFF; + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int reg = mc->reg; + int shift = mc->shift; + int mask = mc->max; pr_debug("Entered %s\n", __func__); @@ -358,9 +360,11 @@ static int lm4857_get_reg(struct snd_kcontrol *kcontrol, static int lm4857_set_reg(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - int reg = kcontrol->private_value & 0xFF; - int shift = (kcontrol->private_value >> 8) & 0x0F; - int mask = (kcontrol->private_value >> 16) & 0xFF; + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int reg = mc->reg; + int shift = mc->shift; + int mask = mc->max; if (((lm4857_regs[reg] >> shift) & mask) == ucontrol->value.integer.value[0]) diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index ab680aa..1a28317 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -37,6 +37,20 @@ #include "s3c-i2s-v2.h" +#undef S3C_IIS_V2_SUPPORTED + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#define S3C_IIS_V2_SUPPORTED +#endif + +#ifdef CONFIG_PLAT_S3C64XX +#define S3C_IIS_V2_SUPPORTED +#endif + +#ifndef S3C_IIS_V2_SUPPORTED +#error Unsupported CPU model +#endif + #define S3C2412_I2S_DEBUG_CON 0 static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai) @@ -75,7 +89,7 @@ static inline void dbg_showcon(const char *fn, u32 con) /* Turn on or off the transmission path. */ -void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) +static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) { void __iomem *regs = i2s->regs; u32 fic, con, mod; @@ -105,7 +119,9 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) break; default: - dev_err(i2s->dev, "TXEN: Invalid MODE in IISMOD\n"); + dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n", + mod & S3C2412_IISMOD_MODE_MASK); + break; } writel(con, regs + S3C2412_IISCON); @@ -132,7 +148,9 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) break; default: - dev_err(i2s->dev, "TXDIS: Invalid MODE in IISMOD\n"); + dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n", + mod & S3C2412_IISMOD_MODE_MASK); + break; } writel(mod, regs + S3C2412_IISMOD); @@ -143,9 +161,8 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) dbg_showcon(__func__, con); pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); } -EXPORT_SYMBOL_GPL(s3c2412_snd_txctrl); -void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) +static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) { void __iomem *regs = i2s->regs; u32 fic, con, mod; @@ -175,7 +192,8 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) break; default: - dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n"); + dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n", + mod & S3C2412_IISMOD_MODE_MASK); } writel(mod, regs + S3C2412_IISMOD); @@ -199,7 +217,8 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) break; default: - dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n"); + dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n", + mod & S3C2412_IISMOD_MODE_MASK); } writel(con, regs + S3C2412_IISCON); @@ -209,7 +228,6 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) fic = readl(regs + S3C2412_IISFIC); pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); } -EXPORT_SYMBOL_GPL(s3c2412_snd_rxctrl); /* * Wait for the LR signal to allow synchronisation to the L/R clock @@ -266,7 +284,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, */ #define IISMOD_MASTER_MASK (1 << 11) #define IISMOD_SLAVE (1 << 11) -#define IISMOD_MASTER (0x0) +#define IISMOD_MASTER (0 << 11) #endif switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { @@ -281,7 +299,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, iismod |= IISMOD_MASTER; break; default: - pr_debug("unknwon master/slave format\n"); + pr_err("unknwon master/slave format\n"); return -EINVAL; } @@ -298,7 +316,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, iismod |= S3C2412_IISMOD_SDF_IIS; break; default: - pr_debug("Unknown data format\n"); + pr_err("Unknown data format\n"); return -EINVAL; } @@ -327,6 +345,7 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, iismod = readl(i2s->regs + S3C2412_IISMOD); pr_debug("%s: r: IISMOD: %x\n", __func__, iismod); +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) switch (params_format(params)) { case SNDRV_PCM_FORMAT_S8: iismod |= S3C2412_IISMOD_8BIT; @@ -335,6 +354,25 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, iismod &= ~S3C2412_IISMOD_8BIT; break; } +#endif + +#ifdef CONFIG_PLAT_S3C64XX + iismod &= ~0x606; + /* Sample size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + /* 8 bit sample, 16fs BCLK */ + iismod |= 0x2004; + break; + case SNDRV_PCM_FORMAT_S16_LE: + /* 16 bit sample, 32fs BCLK */ + break; + case SNDRV_PCM_FORMAT_S24_LE: + /* 24 bit sample, 48fs BCLK */ + iismod |= 0x4002; + break; + } +#endif writel(iismod, i2s->regs + S3C2412_IISMOD); pr_debug("%s: w: IISMOD: %x\n", __func__, iismod); @@ -489,6 +527,8 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, unsigned int best_rate = 0; unsigned int best_deviation = INT_MAX; + pr_debug("Input clock rate %ldHz\n", clkrate); + if (fstab == NULL) fstab = iis_fs_tab; @@ -507,7 +547,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, actual = clkrate / (fsdiv * div); deviation = actual - rate; - printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n", + printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n", fsdiv, div, actual, deviation); deviation = abs(deviation); @@ -523,7 +563,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, break; } - printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n", + printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n", best_fs, best_div, best_rate); info->fs_div = best_fs; @@ -539,12 +579,31 @@ int s3c_i2sv2_probe(struct platform_device *pdev, unsigned long base) { struct device *dev = &pdev->dev; + unsigned int iismod; i2s->dev = dev; /* record our i2s structure for later use in the callbacks */ dai->private_data = i2s; + if (!base) { + struct resource *res = platform_get_resource(pdev, + IORESOURCE_MEM, + 0); + if (!res) { + dev_err(dev, "Unable to get register resource\n"); + return -ENXIO; + } + + if (!request_mem_region(res->start, resource_size(res), + "s3c64xx-i2s-v4")) { + dev_err(dev, "Unable to request register region\n"); + return -EBUSY; + } + + base = res->start; + } + i2s->regs = ioremap(base, 0x100); if (i2s->regs == NULL) { dev_err(dev, "cannot ioremap registers\n"); @@ -560,12 +619,16 @@ int s3c_i2sv2_probe(struct platform_device *pdev, clk_enable(i2s->iis_pclk); + /* Mark ourselves as in TXRX mode so we can run through our cleanup + * process without warnings. */ + iismod = readl(i2s->regs + S3C2412_IISMOD); + iismod |= S3C2412_IISMOD_MODE_TXRX; + writel(iismod, i2s->regs + S3C2412_IISMOD); s3c2412_snd_txctrl(i2s, 0); s3c2412_snd_rxctrl(i2s, 0); return 0; } - EXPORT_SYMBOL_GPL(s3c_i2sv2_probe); #ifdef CONFIG_PM diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c index b7e0b3f..a587ec4 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ b/sound/soc/s3c24xx/s3c2412-i2s.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -120,7 +121,7 @@ static int s3c2412_i2s_probe(struct platform_device *pdev, s3c2412_i2s.iis_cclk = clk_get(&pdev->dev, "i2sclk"); if (s3c2412_i2s.iis_cclk == NULL) { - pr_debug("failed to get i2sclk clock\n"); + pr_err("failed to get i2sclk clock\n"); iounmap(s3c2412_i2s.regs); return -ENODEV; } diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c index 3698f70..3f03d5d 100644 --- a/sound/soc/s3c24xx/s3c2443-ac97.c +++ b/sound/soc/s3c24xx/s3c2443-ac97.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index cc06696..556e35f 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -21,6 +21,8 @@ #include #include #include +#include + #include #include #include diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index 169ddad..eecfa5e 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -218,24 +218,17 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream) * sync to pclk, half-word transfers to the IIS-FIFO. */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { s3c2410_dma_devconfig(prtd->params->channel, - S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC | - S3C2410_DISRCC_APB, prtd->params->dma_addr); - - s3c2410_dma_config(prtd->params->channel, - prtd->params->dma_size, - S3C2410_DCON_SYNC_PCLK | - S3C2410_DCON_HANDSHAKE); + S3C2410_DMASRC_MEM, + prtd->params->dma_addr); } else { - s3c2410_dma_config(prtd->params->channel, - prtd->params->dma_size, - S3C2410_DCON_HANDSHAKE | - S3C2410_DCON_SYNC_PCLK); - s3c2410_dma_devconfig(prtd->params->channel, - S3C2410_DMASRC_HW, 0x3, - prtd->params->dma_addr); + S3C2410_DMASRC_HW, + prtd->params->dma_addr); } + s3c2410_dma_config(prtd->params->channel, + prtd->params->dma_size); + /* flush the DMA channel */ s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH); prtd->dma_loaded = 0; diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c index 33c5de7..3c06c40 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s.c +++ b/sound/soc/s3c24xx/s3c64xx-i2s.c @@ -108,48 +108,19 @@ static int s3c64xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, return 0; } - -unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *dai) +struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai) { struct s3c_i2sv2_info *i2s = to_info(dai); - return clk_get_rate(i2s->iis_cclk); + return i2s->iis_cclk; } -EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clockrate); +EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clock); static int s3c64xx_i2s_probe(struct platform_device *pdev, struct snd_soc_dai *dai) { - struct device *dev = &pdev->dev; - struct s3c_i2sv2_info *i2s; - int ret; - - dev_dbg(dev, "%s: probing dai %d\n", __func__, pdev->id); - - if (pdev->id < 0 || pdev->id > ARRAY_SIZE(s3c64xx_i2s)) { - dev_err(dev, "id %d out of range\n", pdev->id); - return -EINVAL; - } - - i2s = &s3c64xx_i2s[pdev->id]; - - ret = s3c_i2sv2_probe(pdev, dai, i2s, - pdev->id ? S3C64XX_PA_IIS1 : S3C64XX_PA_IIS0); - if (ret) - return ret; - - i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id]; - i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id]; - - i2s->iis_cclk = clk_get(dev, "audio-bus"); - if (IS_ERR(i2s->iis_cclk)) { - dev_err(dev, "failed to get audio-bus"); - iounmap(i2s->regs); - return -ENODEV; - } - /* configure GPIO for i2s port */ - switch (pdev->id) { + switch (dai->id) { case 0: s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK); s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK); @@ -175,41 +146,122 @@ static int s3c64xx_i2s_probe(struct platform_device *pdev, SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) #define S3C64XX_I2S_FMTS \ - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE) + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE) static struct snd_soc_dai_ops s3c64xx_i2s_dai_ops = { .set_sysclk = s3c64xx_i2s_set_sysclk, }; -struct snd_soc_dai s3c64xx_i2s_dai = { - .name = "s3c64xx-i2s", - .id = 0, - .probe = s3c64xx_i2s_probe, - .playback = { - .channels_min = 2, - .channels_max = 2, - .rates = S3C64XX_I2S_RATES, - .formats = S3C64XX_I2S_FMTS, +struct snd_soc_dai s3c64xx_i2s_dai[] = { + { + .name = "s3c64xx-i2s", + .id = 0, + .probe = s3c64xx_i2s_probe, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C64XX_I2S_RATES, + .formats = S3C64XX_I2S_FMTS, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C64XX_I2S_RATES, + .formats = S3C64XX_I2S_FMTS, + }, + .ops = &s3c64xx_i2s_dai_ops, + .symmetric_rates = 1, }, - .capture = { - .channels_min = 2, - .channels_max = 2, - .rates = S3C64XX_I2S_RATES, - .formats = S3C64XX_I2S_FMTS, + { + .name = "s3c64xx-i2s", + .id = 1, + .probe = s3c64xx_i2s_probe, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C64XX_I2S_RATES, + .formats = S3C64XX_I2S_FMTS, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C64XX_I2S_RATES, + .formats = S3C64XX_I2S_FMTS, + }, + .ops = &s3c64xx_i2s_dai_ops, + .symmetric_rates = 1, }, - .ops = &s3c64xx_i2s_dai_ops, }; EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai); +static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev) +{ + struct s3c_i2sv2_info *i2s; + struct snd_soc_dai *dai; + int ret; + + if (pdev->id >= ARRAY_SIZE(s3c64xx_i2s)) { + dev_err(&pdev->dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + i2s = &s3c64xx_i2s[pdev->id]; + dai = &s3c64xx_i2s_dai[pdev->id]; + dai->dev = &pdev->dev; + + i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id]; + i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id]; + + i2s->iis_cclk = clk_get(&pdev->dev, "audio-bus"); + if (IS_ERR(i2s->iis_cclk)) { + dev_err(&pdev->dev, "failed to get audio-bus\n"); + ret = PTR_ERR(i2s->iis_cclk); + goto err; + } + + ret = s3c_i2sv2_probe(pdev, dai, i2s, 0); + if (ret) + goto err_clk; + + ret = s3c_i2sv2_register_dai(dai); + if (ret != 0) + goto err_i2sv2; + + return 0; + +err_i2sv2: + /* Not implemented for I2Sv2 core yet */ +err_clk: + clk_put(i2s->iis_cclk); +err: + return ret; +} + +static __devexit int s3c64xx_iis_dev_remove(struct platform_device *pdev) +{ + dev_err(&pdev->dev, "Device removal not yet supported\n"); + return 0; +} + +static struct platform_driver s3c64xx_iis_driver = { + .probe = s3c64xx_iis_dev_probe, + .remove = s3c64xx_iis_dev_remove, + .driver = { + .name = "s3c64xx-iis", + .owner = THIS_MODULE, + }, +}; + static int __init s3c64xx_i2s_init(void) { - return s3c_i2sv2_register_dai(&s3c64xx_i2s_dai); + return platform_driver_register(&s3c64xx_iis_driver); } module_init(s3c64xx_i2s_init); static void __exit s3c64xx_i2s_exit(void) { - snd_soc_unregister_dai(&s3c64xx_i2s_dai); + platform_driver_unregister(&s3c64xx_iis_driver); } module_exit(s3c64xx_i2s_exit); @@ -217,6 +269,3 @@ module_exit(s3c64xx_i2s_exit); MODULE_AUTHOR("Ben Dooks, "); MODULE_DESCRIPTION("S3C64XX I2S SoC Interface"); MODULE_LICENSE("GPL"); - - - diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.h b/sound/soc/s3c24xx/s3c64xx-i2s.h index b7ffe3c..02148ce 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s.h +++ b/sound/soc/s3c24xx/s3c64xx-i2s.h @@ -15,6 +15,8 @@ #ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H #define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__ +struct clk; + #include "s3c-i2s-v2.h" #define S3C64XX_DIV_BCLK S3C_I2SV2_DIV_BCLK @@ -24,8 +26,8 @@ #define S3C64XX_CLKSRC_PCLK (0) #define S3C64XX_CLKSRC_MUX (1) -extern struct snd_soc_dai s3c64xx_i2s_dai; +extern struct snd_soc_dai s3c64xx_i2s_dai[]; -extern unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *cpu_dai); +extern struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai); #endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */ diff --git a/sound/soc/s6000/Kconfig b/sound/soc/s6000/Kconfig new file mode 100644 index 0000000..c74eb3d --- /dev/null +++ b/sound/soc/s6000/Kconfig @@ -0,0 +1,19 @@ +config SND_S6000_SOC + tristate "SoC Audio for the Stretch s6000 family" + depends on XTENSA_VARIANT_S6000 + help + Say Y or M if you want to add support for codecs attached to + s6000 family chips. You will also need to select the platform + to support below. + +config SND_S6000_SOC_I2S + tristate + +config SND_S6000_SOC_S6IPCAM + tristate "SoC Audio support for Stretch 6105 IP Camera" + depends on SND_S6000_SOC && XTENSA_PLATFORM_S6105 + select SND_S6000_SOC_I2S + select SND_SOC_TLV320AIC3X + help + Say Y if you want to add support for SoC audio on the + Stretch s6105 IP Camera Reference Design. diff --git a/sound/soc/s6000/Makefile b/sound/soc/s6000/Makefile new file mode 100644 index 0000000..7a61361 --- /dev/null +++ b/sound/soc/s6000/Makefile @@ -0,0 +1,11 @@ +# s6000 Platform Support +snd-soc-s6000-objs := s6000-pcm.o +snd-soc-s6000-i2s-objs := s6000-i2s.o + +obj-$(CONFIG_SND_S6000_SOC) += snd-soc-s6000.o +obj-$(CONFIG_SND_S6000_SOC_I2S) += snd-soc-s6000-i2s.o + +# s6105 Machine Support +snd-soc-s6ipcam-objs := s6105-ipcam.o + +obj-$(CONFIG_SND_S6000_SOC_S6IPCAM) += snd-soc-s6ipcam.o diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c new file mode 100644 index 0000000..c5cda18 --- /dev/null +++ b/sound/soc/s6000/s6000-i2s.c @@ -0,0 +1,629 @@ +/* + * ALSA SoC I2S Audio Layer for the Stretch S6000 family + * + * Author: Daniel Gloeckner, + * Copyright: (C) 2009 emlix GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "s6000-i2s.h" +#include "s6000-pcm.h" + +struct s6000_i2s_dev { + dma_addr_t sifbase; + u8 __iomem *scbbase; + unsigned int wide; + unsigned int channel_in; + unsigned int channel_out; + unsigned int lines_in; + unsigned int lines_out; + struct s6000_pcm_dma_params dma_params; +}; + +#define S6_I2S_INTERRUPT_STATUS 0x00 +#define S6_I2S_INT_OVERRUN 1 +#define S6_I2S_INT_UNDERRUN 2 +#define S6_I2S_INT_ALIGNMENT 4 +#define S6_I2S_INTERRUPT_ENABLE 0x04 +#define S6_I2S_INTERRUPT_RAW 0x08 +#define S6_I2S_INTERRUPT_CLEAR 0x0C +#define S6_I2S_INTERRUPT_SET 0x10 +#define S6_I2S_MODE 0x20 +#define S6_I2S_DUAL 0 +#define S6_I2S_WIDE 1 +#define S6_I2S_TX_DEFAULT 0x24 +#define S6_I2S_DATA_CFG(c) (0x40 + 0x10 * (c)) +#define S6_I2S_IN 0 +#define S6_I2S_OUT 1 +#define S6_I2S_UNUSED 2 +#define S6_I2S_INTERFACE_CFG(c) (0x44 + 0x10 * (c)) +#define S6_I2S_DIV_MASK 0x001fff +#define S6_I2S_16BIT 0x000000 +#define S6_I2S_20BIT 0x002000 +#define S6_I2S_24BIT 0x004000 +#define S6_I2S_32BIT 0x006000 +#define S6_I2S_BITS_MASK 0x006000 +#define S6_I2S_MEM_16BIT 0x000000 +#define S6_I2S_MEM_32BIT 0x008000 +#define S6_I2S_MEM_MASK 0x008000 +#define S6_I2S_CHANNELS_SHIFT 16 +#define S6_I2S_CHANNELS_MASK 0x030000 +#define S6_I2S_SCK_IN 0x000000 +#define S6_I2S_SCK_OUT 0x040000 +#define S6_I2S_SCK_DIR 0x040000 +#define S6_I2S_WS_IN 0x000000 +#define S6_I2S_WS_OUT 0x080000 +#define S6_I2S_WS_DIR 0x080000 +#define S6_I2S_LEFT_FIRST 0x000000 +#define S6_I2S_RIGHT_FIRST 0x100000 +#define S6_I2S_FIRST 0x100000 +#define S6_I2S_CUR_SCK 0x200000 +#define S6_I2S_CUR_WS 0x400000 +#define S6_I2S_ENABLE(c) (0x48 + 0x10 * (c)) +#define S6_I2S_DISABLE_IF 0x02 +#define S6_I2S_ENABLE_IF 0x03 +#define S6_I2S_IS_BUSY 0x04 +#define S6_I2S_DMA_ACTIVE 0x08 +#define S6_I2S_IS_ENABLED 0x10 + +#define S6_I2S_NUM_LINES 4 + +#define S6_I2S_SIF_PORT0 0x0000000 +#define S6_I2S_SIF_PORT1 0x0000080 /* docs say 0x0000010 */ + +static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val) +{ + writel(val, dev->scbbase + reg); +} + +static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg) +{ + return readl(dev->scbbase + reg); +} + +static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg, + u32 mask, u32 val) +{ + val ^= s6_i2s_read_reg(dev, reg) & ~mask; + s6_i2s_write_reg(dev, reg, val); +} + +static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel) +{ + int i, j, cur, prev; + + /* + * Wait for WCLK to toggle 5 times before enabling the channel + * s6000 Family Datasheet 3.6.4: + * "At least two cycles of WS must occur between commands + * to disable or enable the interface" + */ + j = 0; + prev = ~S6_I2S_CUR_WS; + for (i = 1000000; --i && j < 6; ) { + cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel)) + & S6_I2S_CUR_WS; + if (prev != cur) { + prev = cur; + j++; + } + } + if (j < 6) + printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n"); + + s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF); +} + +static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel) +{ + s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF); +} + +static void s6000_i2s_start(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data; + int channel; + + channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + dev->channel_out : dev->channel_in; + + s6000_i2s_start_channel(dev, channel); +} + +static void s6000_i2s_stop(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data; + int channel; + + channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + dev->channel_out : dev->channel_in; + + s6000_i2s_stop_channel(dev, channel); +} + +static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd, + int after) +{ + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after) + s6000_i2s_start(substream); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + if (!after) + s6000_i2s_stop(substream); + } + return 0; +} + +static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev) +{ + unsigned int pending; + pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW); + pending &= S6_I2S_INT_ALIGNMENT | + S6_I2S_INT_UNDERRUN | + S6_I2S_INT_OVERRUN; + s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending); + + return pending; +} + +static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai) +{ + struct s6000_i2s_dev *dev = cpu_dai->private_data; + unsigned int errors; + unsigned int ret; + + errors = s6000_i2s_int_sources(dev); + if (likely(!errors)) + return 0; + + ret = 0; + if (errors & S6_I2S_INT_ALIGNMENT) + printk(KERN_ERR "s6000-i2s: WCLK misaligned\n"); + if (errors & S6_I2S_INT_UNDERRUN) + ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK; + if (errors & S6_I2S_INT_OVERRUN) + ret |= 1 << SNDRV_PCM_STREAM_CAPTURE; + return ret; +} + +static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev) +{ + int channel; + int n = 50; + for (channel = 0; channel < 2; channel++) { + while (--n >= 0) { + int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel)); + if ((v & S6_I2S_IS_ENABLED) + || !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY))) + break; + udelay(20); + } + } + if (n < 0) + printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces"); +} + +static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct s6000_i2s_dev *dev = cpu_dai->private_data; + u32 w; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + w = S6_I2S_SCK_IN | S6_I2S_WS_IN; + break; + case SND_SOC_DAIFMT_CBS_CFM: + w = S6_I2S_SCK_OUT | S6_I2S_WS_IN; + break; + case SND_SOC_DAIFMT_CBM_CFS: + w = S6_I2S_SCK_IN | S6_I2S_WS_OUT; + break; + case SND_SOC_DAIFMT_CBS_CFS: + w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + w |= S6_I2S_LEFT_FIRST; + break; + case SND_SOC_DAIFMT_NB_IF: + w |= S6_I2S_RIGHT_FIRST; + break; + default: + return -EINVAL; + } + + s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0), + S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w); + s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1), + S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w); + + return 0; +} + +static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) +{ + struct s6000_i2s_dev *dev = dai->private_data; + + if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2) + return -EINVAL; + + s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id), + S6_I2S_DIV_MASK, div / 2 - 1); + return 0; +} + +static int s6000_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct s6000_i2s_dev *dev = dai->private_data; + int interf; + u32 w = 0; + + if (dev->wide) + interf = 0; + else { + w |= (((params_channels(params) - 2) / 2) + << S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK; + interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + ? dev->channel_out : dev->channel_in; + } + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT; + break; + case SNDRV_PCM_FORMAT_S32_LE: + w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT; + break; + default: + printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n", + params_format(params)); + return -EINVAL; + } + + if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf)) + & S6_I2S_IS_ENABLED) { + printk(KERN_ERR "s6000-i2s: interface already enabled\n"); + return -EBUSY; + } + + s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf), + S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK, + w); + + return 0; +} + +static int s6000_i2s_dai_probe(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct s6000_i2s_dev *dev = dai->private_data; + struct s6000_snd_platform_data *pdata = pdev->dev.platform_data; + + if (!pdata) + return -EINVAL; + + dev->wide = pdata->wide; + dev->channel_in = pdata->channel_in; + dev->channel_out = pdata->channel_out; + dev->lines_in = pdata->lines_in; + dev->lines_out = pdata->lines_out; + + s6_i2s_write_reg(dev, S6_I2S_MODE, + dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL); + + if (dev->wide) { + int i; + + if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES) + return -EINVAL; + + dev->channel_in = 0; + dev->channel_out = 1; + dai->capture.channels_min = 2 * dev->lines_in; + dai->capture.channels_max = dai->capture.channels_min; + dai->playback.channels_min = 2 * dev->lines_out; + dai->playback.channels_max = dai->playback.channels_min; + + for (i = 0; i < dev->lines_out; i++) + s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT); + + for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++) + s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), + S6_I2S_UNUSED); + + for (; i < S6_I2S_NUM_LINES; i++) + s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN); + } else { + unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED}; + + if (dev->lines_in > 1 || dev->lines_out > 1) + return -EINVAL; + + dai->capture.channels_min = 2 * dev->lines_in; + dai->capture.channels_max = 8 * dev->lines_in; + dai->playback.channels_min = 2 * dev->lines_out; + dai->playback.channels_max = 8 * dev->lines_out; + + if (dev->lines_in) + cfg[dev->channel_in] = S6_I2S_IN; + if (dev->lines_out) + cfg[dev->channel_out] = S6_I2S_OUT; + + s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]); + s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]); + } + + if (dev->lines_out) { + if (dev->lines_in) { + if (!dev->dma_params.dma_out) + return -ENODEV; + } else { + dev->dma_params.dma_out = dev->dma_params.dma_in; + dev->dma_params.dma_in = 0; + } + } + dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ? + S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0); + dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ? + S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0); + dev->dma_params.same_rate = pdata->same_rate | pdata->wide; + return 0; +} + +#define S6000_I2S_RATES (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \ + SNDRV_PCM_RATE_8000_192000) +#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops s6000_i2s_dai_ops = { + .set_fmt = s6000_i2s_set_dai_fmt, + .set_clkdiv = s6000_i2s_set_clkdiv, + .hw_params = s6000_i2s_hw_params, +}; + +struct snd_soc_dai s6000_i2s_dai = { + .name = "s6000-i2s", + .id = 0, + .probe = s6000_i2s_dai_probe, + .playback = { + .channels_min = 2, + .channels_max = 8, + .formats = S6000_I2S_FORMATS, + .rates = S6000_I2S_RATES, + .rate_min = 0, + .rate_max = 1562500, + }, + .capture = { + .channels_min = 2, + .channels_max = 8, + .formats = S6000_I2S_FORMATS, + .rates = S6000_I2S_RATES, + .rate_min = 0, + .rate_max = 1562500, + }, + .ops = &s6000_i2s_dai_ops, +} +EXPORT_SYMBOL_GPL(s6000_i2s_dai); + +static int __devinit s6000_i2s_probe(struct platform_device *pdev) +{ + struct s6000_i2s_dev *dev; + struct resource *scbmem, *sifmem, *region, *dma1, *dma2; + u8 __iomem *mmio; + int ret; + + scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!scbmem) { + dev_err(&pdev->dev, "no mem resource?\n"); + ret = -ENODEV; + goto err_release_none; + } + + region = request_mem_region(scbmem->start, + scbmem->end - scbmem->start + 1, + pdev->name); + if (!region) { + dev_err(&pdev->dev, "I2S SCB region already claimed\n"); + ret = -EBUSY; + goto err_release_none; + } + + mmio = ioremap(scbmem->start, scbmem->end - scbmem->start + 1); + if (!mmio) { + dev_err(&pdev->dev, "can't ioremap SCB region\n"); + ret = -ENOMEM; + goto err_release_scb; + } + + sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!sifmem) { + dev_err(&pdev->dev, "no second mem resource?\n"); + ret = -ENODEV; + goto err_release_map; + } + + region = request_mem_region(sifmem->start, + sifmem->end - sifmem->start + 1, + pdev->name); + if (!region) { + dev_err(&pdev->dev, "I2S SIF region already claimed\n"); + ret = -EBUSY; + goto err_release_map; + } + + dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!dma1) { + dev_err(&pdev->dev, "no dma resource?\n"); + ret = -ENODEV; + goto err_release_sif; + } + + region = request_mem_region(dma1->start, dma1->end - dma1->start + 1, + pdev->name); + if (!region) { + dev_err(&pdev->dev, "I2S DMA region already claimed\n"); + ret = -EBUSY; + goto err_release_sif; + } + + dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (dma2) { + region = request_mem_region(dma2->start, + dma2->end - dma2->start + 1, + pdev->name); + if (!region) { + dev_err(&pdev->dev, + "I2S DMA region already claimed\n"); + ret = -EBUSY; + goto err_release_dma1; + } + } + + dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL); + if (!dev) { + ret = -ENOMEM; + goto err_release_dma2; + } + + s6000_i2s_dai.dev = &pdev->dev; + s6000_i2s_dai.private_data = dev; + s6000_i2s_dai.dma_data = &dev->dma_params; + + dev->sifbase = sifmem->start; + dev->scbbase = mmio; + + s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0); + s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, + S6_I2S_INT_ALIGNMENT | + S6_I2S_INT_UNDERRUN | + S6_I2S_INT_OVERRUN); + + s6000_i2s_stop_channel(dev, 0); + s6000_i2s_stop_channel(dev, 1); + s6000_i2s_wait_disabled(dev); + + dev->dma_params.check_xrun = s6000_i2s_check_xrun; + dev->dma_params.trigger = s6000_i2s_trigger; + dev->dma_params.dma_in = dma1->start; + dev->dma_params.dma_out = dma2 ? dma2->start : 0; + dev->dma_params.irq = platform_get_irq(pdev, 0); + if (dev->dma_params.irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + ret = -ENODEV; + goto err_release_dev; + } + + s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, + S6_I2S_INT_ALIGNMENT | + S6_I2S_INT_UNDERRUN | + S6_I2S_INT_OVERRUN); + + ret = snd_soc_register_dai(&s6000_i2s_dai); + if (ret) + goto err_release_dev; + + return 0; + +err_release_dev: + kfree(dev); +err_release_dma2: + if (dma2) + release_mem_region(dma2->start, dma2->end - dma2->start + 1); +err_release_dma1: + release_mem_region(dma1->start, dma1->end - dma1->start + 1); +err_release_sif: + release_mem_region(sifmem->start, (sifmem->end - sifmem->start) + 1); +err_release_map: + iounmap(mmio); +err_release_scb: + release_mem_region(scbmem->start, (scbmem->end - scbmem->start) + 1); +err_release_none: + return ret; +} + +static void __devexit s6000_i2s_remove(struct platform_device *pdev) +{ + struct s6000_i2s_dev *dev = s6000_i2s_dai.private_data; + struct resource *region; + void __iomem *mmio = dev->scbbase; + + snd_soc_unregister_dai(&s6000_i2s_dai); + + s6000_i2s_stop_channel(dev, 0); + s6000_i2s_stop_channel(dev, 1); + + s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0); + s6000_i2s_dai.private_data = 0; + kfree(dev); + + region = platform_get_resource(pdev, IORESOURCE_DMA, 0); + release_mem_region(region->start, region->end - region->start + 1); + + region = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (region) + release_mem_region(region->start, + region->end - region->start + 1); + + region = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(region->start, (region->end - region->start) + 1); + + iounmap(mmio); + region = platform_get_resource(pdev, IORESOURCE_IO, 0); + release_mem_region(region->start, (region->end - region->start) + 1); +} + +static struct platform_driver s6000_i2s_driver = { + .probe = s6000_i2s_probe, + .remove = __devexit_p(s6000_i2s_remove), + .driver = { + .name = "s6000-i2s", + .owner = THIS_MODULE, + }, +}; + +static int __init s6000_i2s_init(void) +{ + return platform_driver_register(&s6000_i2s_driver); +} +module_init(s6000_i2s_init); + +static void __exit s6000_i2s_exit(void) +{ + platform_driver_unregister(&s6000_i2s_driver); +} +module_exit(s6000_i2s_exit); + +MODULE_AUTHOR("Daniel Gloeckner"); +MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/s6000/s6000-i2s.h b/sound/soc/s6000/s6000-i2s.h new file mode 100644 index 0000000..2375fdf --- /dev/null +++ b/sound/soc/s6000/s6000-i2s.h @@ -0,0 +1,25 @@ +/* + * ALSA SoC I2S Audio Layer for the Stretch s6000 family + * + * Author: Daniel Gloeckner, + * Copyright: (C) 2009 emlix GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _S6000_I2S_H +#define _S6000_I2S_H + +extern struct snd_soc_dai s6000_i2s_dai; + +struct s6000_snd_platform_data { + int lines_in; + int lines_out; + int channel_in; + int channel_out; + int wide; + int same_rate; +}; +#endif diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c new file mode 100644 index 0000000..83b8028 --- /dev/null +++ b/sound/soc/s6000/s6000-pcm.c @@ -0,0 +1,497 @@ +/* + * ALSA PCM interface for the Stetch s6000 family + * + * Author: Daniel Gloeckner, + * Copyright: (C) 2009 emlix GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "s6000-pcm.h" + +#define S6_PCM_PREALLOCATE_SIZE (96 * 1024) +#define S6_PCM_PREALLOCATE_MAX (2048 * 1024) + +static struct snd_pcm_hardware s6000_pcm_hardware = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_JOINT_DUPLEX), + .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE), + .rates = (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \ + SNDRV_PCM_RATE_8000_192000), + .rate_min = 0, + .rate_max = 1562500, + .channels_min = 2, + .channels_max = 8, + .buffer_bytes_max = 0x7ffffff0, + .period_bytes_min = 16, + .period_bytes_max = 0xfffff0, + .periods_min = 2, + .periods_max = 1024, /* no limit */ + .fifo_size = 0, +}; + +struct s6000_runtime_data { + spinlock_t lock; + int period; /* current DMA period */ +}; + +static void s6000_pcm_enqueue_dma(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct s6000_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data; + int channel; + unsigned int period_size; + unsigned int dma_offset; + dma_addr_t dma_pos; + dma_addr_t src, dst; + + period_size = snd_pcm_lib_period_bytes(substream); + dma_offset = prtd->period * period_size; + dma_pos = runtime->dma_addr + dma_offset; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + src = dma_pos; + dst = par->sif_out; + channel = par->dma_out; + } else { + src = par->sif_in; + dst = dma_pos; + channel = par->dma_in; + } + + if (!s6dmac_channel_enabled(DMA_MASK_DMAC(channel), + DMA_INDEX_CHNL(channel))) + return; + + if (s6dmac_fifo_full(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel))) { + printk(KERN_ERR "s6000-pcm: fifo full\n"); + return; + } + + BUG_ON(period_size & 15); + s6dmac_put_fifo(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel), + src, dst, period_size); + + prtd->period++; + if (unlikely(prtd->period >= runtime->periods)) + prtd->period = 0; +} + +static irqreturn_t s6000_pcm_irq(int irq, void *data) +{ + struct snd_pcm *pcm = data; + struct snd_soc_pcm_runtime *runtime = pcm->private_data; + struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data; + struct s6000_runtime_data *prtd; + unsigned int has_xrun; + int i, ret = IRQ_NONE; + u32 channel[2] = { + [SNDRV_PCM_STREAM_PLAYBACK] = params->dma_out, + [SNDRV_PCM_STREAM_CAPTURE] = params->dma_in + }; + + has_xrun = params->check_xrun(runtime->dai->cpu_dai); + + for (i = 0; i < ARRAY_SIZE(channel); ++i) { + struct snd_pcm_substream *substream = pcm->streams[i].substream; + unsigned int pending; + + if (!channel[i]) + continue; + + if (unlikely(has_xrun & (1 << i)) && + substream->runtime && + snd_pcm_running(substream)) { + dev_dbg(pcm->dev, "xrun\n"); + snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); + ret = IRQ_HANDLED; + } + + pending = s6dmac_int_sources(DMA_MASK_DMAC(channel[i]), + DMA_INDEX_CHNL(channel[i])); + + if (pending & 1) { + ret = IRQ_HANDLED; + if (likely(substream->runtime && + snd_pcm_running(substream))) { + snd_pcm_period_elapsed(substream); + dev_dbg(pcm->dev, "period elapsed %x %x\n", + s6dmac_cur_src(DMA_MASK_DMAC(channel[i]), + DMA_INDEX_CHNL(channel[i])), + s6dmac_cur_dst(DMA_MASK_DMAC(channel[i]), + DMA_INDEX_CHNL(channel[i]))); + prtd = substream->runtime->private_data; + spin_lock(&prtd->lock); + s6000_pcm_enqueue_dma(substream); + spin_unlock(&prtd->lock); + } + } + + if (unlikely(pending & ~7)) { + if (pending & (1 << 3)) + printk(KERN_WARNING + "s6000-pcm: DMA %x Underflow\n", + channel[i]); + if (pending & (1 << 4)) + printk(KERN_WARNING + "s6000-pcm: DMA %x Overflow\n", + channel[i]); + if (pending & 0x1e0) + printk(KERN_WARNING + "s6000-pcm: DMA %x Master Error " + "(mask %x)\n", + channel[i], pending >> 5); + + } + } + + return ret; +} + +static int s6000_pcm_start(struct snd_pcm_substream *substream) +{ + struct s6000_runtime_data *prtd = substream->runtime->private_data; + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data; + unsigned long flags; + int srcinc; + u32 dma; + + spin_lock_irqsave(&prtd->lock, flags); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + srcinc = 1; + dma = par->dma_out; + } else { + srcinc = 0; + dma = par->dma_in; + } + s6dmac_enable_chan(DMA_MASK_DMAC(dma), DMA_INDEX_CHNL(dma), + 1 /* priority 1 (0 is max) */, + 0 /* peripheral requests w/o xfer length mode */, + srcinc /* source address increment */, + srcinc^1 /* destination address increment */, + 0 /* chunksize 0 (skip impossible on this dma) */, + 0 /* source skip after chunk (impossible) */, + 0 /* destination skip after chunk (impossible) */, + 4 /* 16 byte burst size */, + -1 /* don't conserve bandwidth */, + 0 /* low watermark irq descriptor theshold */, + 0 /* disable hardware timestamps */, + 1 /* enable channel */); + + s6000_pcm_enqueue_dma(substream); + s6000_pcm_enqueue_dma(substream); + + spin_unlock_irqrestore(&prtd->lock, flags); + + return 0; +} + +static int s6000_pcm_stop(struct snd_pcm_substream *substream) +{ + struct s6000_runtime_data *prtd = substream->runtime->private_data; + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data; + unsigned long flags; + u32 channel; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + channel = par->dma_out; + else + channel = par->dma_in; + + s6dmac_set_terminal_count(DMA_MASK_DMAC(channel), + DMA_INDEX_CHNL(channel), 0); + + spin_lock_irqsave(&prtd->lock, flags); + + s6dmac_disable_chan(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel)); + + spin_unlock_irqrestore(&prtd->lock, flags); + + return 0; +} + +static int s6000_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data; + int ret; + + ret = par->trigger(substream, cmd, 0); + if (ret < 0) + return ret; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ret = s6000_pcm_start(substream); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ret = s6000_pcm_stop(substream); + break; + default: + ret = -EINVAL; + } + if (ret < 0) + return ret; + + return par->trigger(substream, cmd, 1); +} + +static int s6000_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct s6000_runtime_data *prtd = substream->runtime->private_data; + + prtd->period = 0; + + return 0; +} + +static snd_pcm_uframes_t s6000_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct s6000_runtime_data *prtd = runtime->private_data; + unsigned long flags; + unsigned int offset; + dma_addr_t count; + + spin_lock_irqsave(&prtd->lock, flags); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + count = s6dmac_cur_src(DMA_MASK_DMAC(par->dma_out), + DMA_INDEX_CHNL(par->dma_out)); + else + count = s6dmac_cur_dst(DMA_MASK_DMAC(par->dma_in), + DMA_INDEX_CHNL(par->dma_in)); + + count -= runtime->dma_addr; + + spin_unlock_irqrestore(&prtd->lock, flags); + + offset = bytes_to_frames(runtime, count); + if (unlikely(offset >= runtime->buffer_size)) + offset = 0; + + return offset; +} + +static int s6000_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct s6000_runtime_data *prtd; + int ret; + + snd_soc_set_runtime_hwparams(substream, &s6000_pcm_hardware); + + ret = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 16); + if (ret < 0) + return ret; + ret = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 16); + if (ret < 0) + return ret; + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + return ret; + + if (par->same_rate) { + int rate; + spin_lock(&par->lock); /* needed? */ + rate = par->rate; + spin_unlock(&par->lock); + if (rate != -1) { + ret = snd_pcm_hw_constraint_minmax(runtime, + SNDRV_PCM_HW_PARAM_RATE, + rate, rate); + if (ret < 0) + return ret; + } + } + + prtd = kzalloc(sizeof(struct s6000_runtime_data), GFP_KERNEL); + if (prtd == NULL) + return -ENOMEM; + + spin_lock_init(&prtd->lock); + + runtime->private_data = prtd; + + return 0; +} + +static int s6000_pcm_close(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct s6000_runtime_data *prtd = runtime->private_data; + + kfree(prtd); + + return 0; +} + +static int s6000_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data; + int ret; + ret = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + if (ret < 0) { + printk(KERN_WARNING "s6000-pcm: allocation of memory failed\n"); + return ret; + } + + if (par->same_rate) { + spin_lock(&par->lock); + if (par->rate == -1 || + !(par->in_use & ~(1 << substream->stream))) { + par->rate = params_rate(hw_params); + par->in_use |= 1 << substream->stream; + } else if (params_rate(hw_params) != par->rate) { + snd_pcm_lib_free_pages(substream); + par->in_use &= ~(1 << substream->stream); + ret = -EBUSY; + } + spin_unlock(&par->lock); + } + return ret; +} + +static int s6000_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data; + + spin_lock(&par->lock); + par->in_use &= ~(1 << substream->stream); + if (!par->in_use) + par->rate = -1; + spin_unlock(&par->lock); + + return snd_pcm_lib_free_pages(substream); +} + +static struct snd_pcm_ops s6000_pcm_ops = { + .open = s6000_pcm_open, + .close = s6000_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = s6000_pcm_hw_params, + .hw_free = s6000_pcm_hw_free, + .trigger = s6000_pcm_trigger, + .prepare = s6000_pcm_prepare, + .pointer = s6000_pcm_pointer, +}; + +static void s6000_pcm_free(struct snd_pcm *pcm) +{ + struct snd_soc_pcm_runtime *runtime = pcm->private_data; + struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data; + + free_irq(params->irq, pcm); + snd_pcm_lib_preallocate_free_for_all(pcm); +} + +static u64 s6000_pcm_dmamask = DMA_32BIT_MASK; + +static int s6000_pcm_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) +{ + struct snd_soc_pcm_runtime *runtime = pcm->private_data; + struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data; + int res; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &s6000_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = DMA_32BIT_MASK; + + if (params->dma_in) { + s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_in), + DMA_INDEX_CHNL(params->dma_in)); + s6dmac_int_sources(DMA_MASK_DMAC(params->dma_in), + DMA_INDEX_CHNL(params->dma_in)); + } + + if (params->dma_out) { + s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_out), + DMA_INDEX_CHNL(params->dma_out)); + s6dmac_int_sources(DMA_MASK_DMAC(params->dma_out), + DMA_INDEX_CHNL(params->dma_out)); + } + + res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED, + s6000_soc_platform.name, pcm); + if (res) { + printk(KERN_ERR "s6000-pcm couldn't get IRQ\n"); + return res; + } + + res = snd_pcm_lib_preallocate_pages_for_all(pcm, + SNDRV_DMA_TYPE_DEV, + card->dev, + S6_PCM_PREALLOCATE_SIZE, + S6_PCM_PREALLOCATE_MAX); + if (res) + printk(KERN_WARNING "s6000-pcm: preallocation failed\n"); + + spin_lock_init(¶ms->lock); + params->in_use = 0; + params->rate = -1; + return 0; +} + +struct snd_soc_platform s6000_soc_platform = { + .name = "s6000-audio", + .pcm_ops = &s6000_pcm_ops, + .pcm_new = s6000_pcm_new, + .pcm_free = s6000_pcm_free, +}; +EXPORT_SYMBOL_GPL(s6000_soc_platform); + +static int __init s6000_pcm_init(void) +{ + return snd_soc_register_platform(&s6000_soc_platform); +} +module_init(s6000_pcm_init); + +static void __exit s6000_pcm_exit(void) +{ + snd_soc_unregister_platform(&s6000_soc_platform); +} +module_exit(s6000_pcm_exit); + +MODULE_AUTHOR("Daniel Gloeckner"); +MODULE_DESCRIPTION("Stretch s6000 family PCM DMA module"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/s6000/s6000-pcm.h b/sound/soc/s6000/s6000-pcm.h new file mode 100644 index 0000000..96f23f6 --- /dev/null +++ b/sound/soc/s6000/s6000-pcm.h @@ -0,0 +1,35 @@ +/* + * ALSA PCM interface for the Stretch s6000 family + * + * Author: Daniel Gloeckner, + * Copyright: (C) 2009 emlix GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _S6000_PCM_H +#define _S6000_PCM_H + +struct snd_soc_dai; +struct snd_pcm_substream; + +struct s6000_pcm_dma_params { + unsigned int (*check_xrun)(struct snd_soc_dai *cpu_dai); + int (*trigger)(struct snd_pcm_substream *substream, int cmd, int after); + dma_addr_t sif_in; + dma_addr_t sif_out; + u32 dma_in; + u32 dma_out; + int irq; + int same_rate; + + spinlock_t lock; + int in_use; + int rate; +}; + +extern struct snd_soc_platform s6000_soc_platform; + +#endif diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c new file mode 100644 index 0000000..b5f95f9 --- /dev/null +++ b/sound/soc/s6000/s6105-ipcam.c @@ -0,0 +1,244 @@ +/* + * ASoC driver for Stretch s6105 IP camera platform + * + * Author: Daniel Gloeckner, + * Copyright: (C) 2009 emlix GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "../codecs/tlv320aic3x.h" +#include "s6000-pcm.h" +#include "s6000-i2s.h" + +#define S6105_CAM_CODEC_CLOCK 12288000 + +static int s6105_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret = 0; + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_NB_NF); + if (ret < 0) + return ret; + + /* set the codec system clock */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, S6105_CAM_CODEC_CLOCK, + SND_SOC_CLOCK_OUT); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops s6105_ops = { + .hw_params = s6105_hw_params, +}; + +/* s6105 machine dapm widgets */ +static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { + SND_SOC_DAPM_LINE("Audio Out Differential", NULL), + SND_SOC_DAPM_LINE("Audio Out Stereo", NULL), + SND_SOC_DAPM_LINE("Audio In", NULL), +}; + +/* s6105 machine audio_mapnections to the codec pins */ +static const struct snd_soc_dapm_route audio_map[] = { + /* Audio Out connected to HPLOUT, HPLCOM, HPROUT */ + {"Audio Out Differential", NULL, "HPLOUT"}, + {"Audio Out Differential", NULL, "HPLCOM"}, + {"Audio Out Stereo", NULL, "HPLOUT"}, + {"Audio Out Stereo", NULL, "HPROUT"}, + + /* Audio In connected to LINE1L, LINE1R */ + {"LINE1L", NULL, "Audio In"}, + {"LINE1R", NULL, "Audio In"}, +}; + +static int output_type_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item) { + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, "HPLOUT/HPROUT"); + } else { + strcpy(uinfo->value.enumerated.name, "HPLOUT/HPLCOM"); + } + return 0; +} + +static int output_type_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.enumerated.item[0] = kcontrol->private_value; + return 0; +} + +static int output_type_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = kcontrol->private_data; + unsigned int val = (ucontrol->value.enumerated.item[0] != 0); + char *differential = "Audio Out Differential"; + char *stereo = "Audio Out Stereo"; + + if (kcontrol->private_value == val) + return 0; + kcontrol->private_value = val; + snd_soc_dapm_disable_pin(codec, val ? differential : stereo); + snd_soc_dapm_sync(codec); + snd_soc_dapm_enable_pin(codec, val ? stereo : differential); + snd_soc_dapm_sync(codec); + + return 1; +} + +static const struct snd_kcontrol_new audio_out_mux = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Output Mux", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = output_type_info, + .get = output_type_get, + .put = output_type_put, + .private_value = 1 /* default to stereo */ +}; + +/* Logic for a aic3x as connected on the s6105 ip camera ref design */ +static int s6105_aic3x_init(struct snd_soc_codec *codec) +{ + /* Add s6105 specific widgets */ + snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets, + ARRAY_SIZE(aic3x_dapm_widgets)); + + /* Set up s6105 specific audio path audio_map */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* not present */ + snd_soc_dapm_nc_pin(codec, "MONO_LOUT"); + snd_soc_dapm_nc_pin(codec, "LINE2L"); + snd_soc_dapm_nc_pin(codec, "LINE2R"); + + /* not connected */ + snd_soc_dapm_nc_pin(codec, "MIC3L"); /* LINE2L on this chip */ + snd_soc_dapm_nc_pin(codec, "MIC3R"); /* LINE2R on this chip */ + snd_soc_dapm_nc_pin(codec, "LLOUT"); + snd_soc_dapm_nc_pin(codec, "RLOUT"); + snd_soc_dapm_nc_pin(codec, "HPRCOM"); + + /* always connected */ + snd_soc_dapm_enable_pin(codec, "Audio In"); + + /* must correspond to audio_out_mux.private_value initializer */ + snd_soc_dapm_disable_pin(codec, "Audio Out Differential"); + snd_soc_dapm_sync(codec); + snd_soc_dapm_enable_pin(codec, "Audio Out Stereo"); + + snd_soc_dapm_sync(codec); + + snd_ctl_add(codec->card, snd_ctl_new1(&audio_out_mux, codec)); + + return 0; +} + +/* s6105 digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link s6105_dai = { + .name = "TLV320AIC31", + .stream_name = "AIC31", + .cpu_dai = &s6000_i2s_dai, + .codec_dai = &aic3x_dai, + .init = s6105_aic3x_init, + .ops = &s6105_ops, +}; + +/* s6105 audio machine driver */ +static struct snd_soc_card snd_soc_card_s6105 = { + .name = "Stretch IP Camera", + .platform = &s6000_soc_platform, + .dai_link = &s6105_dai, + .num_links = 1, +}; + +/* s6105 audio private data */ +static struct aic3x_setup_data s6105_aic3x_setup = { + .i2c_bus = 0, + .i2c_address = 0x18, +}; + +/* s6105 audio subsystem */ +static struct snd_soc_device s6105_snd_devdata = { + .card = &snd_soc_card_s6105, + .codec_dev = &soc_codec_dev_aic3x, + .codec_data = &s6105_aic3x_setup, +}; + +static struct s6000_snd_platform_data __initdata s6105_snd_data = { + .wide = 0, + .channel_in = 0, + .channel_out = 1, + .lines_in = 1, + .lines_out = 1, + .same_rate = 1, +}; + +static struct platform_device *s6105_snd_device; + +static int __init s6105_init(void) +{ + int ret; + + s6105_snd_device = platform_device_alloc("soc-audio", -1); + if (!s6105_snd_device) + return -ENOMEM; + + platform_set_drvdata(s6105_snd_device, &s6105_snd_devdata); + s6105_snd_devdata.dev = &s6105_snd_device->dev; + platform_device_add_data(s6105_snd_device, &s6105_snd_data, + sizeof(s6105_snd_data)); + + ret = platform_device_add(s6105_snd_device); + if (ret) + platform_device_put(s6105_snd_device); + + return ret; +} + +static void __exit s6105_exit(void) +{ + platform_device_unregister(s6105_snd_device); +} + +module_init(s6105_init); +module_exit(s6105_exit); + +MODULE_AUTHOR("Daniel Gloeckner"); +MODULE_DESCRIPTION("Stretch s6105 IP camera ASoC driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c index 56fa087..b378096 100644 --- a/sound/soc/sh/ssi.c +++ b/sound/soc/sh/ssi.c @@ -145,7 +145,7 @@ static int ssi_hw_params(struct snd_pcm_substream *substream, recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1; pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr); - pr_debug("bits: %d channels: %d\n", bits, channels); + pr_debug("bits: %u channels: %u\n", bits, channels); ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA | CR_SWL_MASK); diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 1cd149b..3f44150 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -113,6 +113,35 @@ static int soc_ac97_dev_register(struct snd_soc_codec *codec) } #endif +static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_card *card = socdev->card; + struct snd_soc_dai_link *machine = rtd->dai; + struct snd_soc_dai *cpu_dai = machine->cpu_dai; + struct snd_soc_dai *codec_dai = machine->codec_dai; + int ret; + + if (codec_dai->symmetric_rates || cpu_dai->symmetric_rates || + machine->symmetric_rates) { + dev_dbg(card->dev, "Symmetry forces %dHz rate\n", + machine->rate); + + ret = snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + machine->rate, + machine->rate); + if (ret < 0) { + dev_err(card->dev, + "Unable to apply rate symmetry constraint: %d\n", ret); + return ret; + } + } + + return 0; +} + /* * Called by ALSA when a PCM substream is opened, the runtime->hw record is * then initialized and any private data can be allocated. This also calls @@ -221,6 +250,13 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) goto machine_err; } + /* Symmetry only applies if we've already got an active stream. */ + if (cpu_dai->active || codec_dai->active) { + ret = soc_pcm_apply_symmetry(substream); + if (ret != 0) + goto machine_err; + } + pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name); pr_debug("asoc: rate mask 0x%x\n", runtime->hw.rates); pr_debug("asoc: min ch %d max ch %d\n", runtime->hw.channels_min, @@ -263,7 +299,6 @@ static void close_delayed_work(struct work_struct *work) { struct snd_soc_card *card = container_of(work, struct snd_soc_card, delayed_work.work); - struct snd_soc_device *socdev = card->socdev; struct snd_soc_codec *codec = card->codec; struct snd_soc_dai *codec_dai; int i; @@ -279,27 +314,10 @@ static void close_delayed_work(struct work_struct *work) /* are we waiting on this codec DAI stream */ if (codec_dai->pop_wait == 1) { - - /* Reduce power if no longer active */ - if (codec->active == 0) { - pr_debug("pop wq D1 %s %s\n", codec->name, - codec_dai->playback.stream_name); - snd_soc_dapm_set_bias_level(socdev, - SND_SOC_BIAS_PREPARE); - } - codec_dai->pop_wait = 0; snd_soc_dapm_stream_event(codec, codec_dai->playback.stream_name, SND_SOC_DAPM_STREAM_STOP); - - /* Fall into standby if no longer active */ - if (codec->active == 0) { - pr_debug("pop wq D3 %s %s\n", codec->name, - codec_dai->playback.stream_name); - snd_soc_dapm_set_bias_level(socdev, - SND_SOC_BIAS_STANDBY); - } } } mutex_unlock(&pcm_mutex); @@ -363,10 +381,6 @@ static int soc_codec_close(struct snd_pcm_substream *substream) snd_soc_dapm_stream_event(codec, codec_dai->capture.stream_name, SND_SOC_DAPM_STREAM_STOP); - - if (codec->active == 0 && codec_dai->pop_wait == 0) - snd_soc_dapm_set_bias_level(socdev, - SND_SOC_BIAS_STANDBY); } mutex_unlock(&pcm_mutex); @@ -431,36 +445,16 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) cancel_delayed_work(&card->delayed_work); } - /* do we need to power up codec */ - if (codec->bias_level != SND_SOC_BIAS_ON) { - snd_soc_dapm_set_bias_level(socdev, - SND_SOC_BIAS_PREPARE); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - snd_soc_dapm_stream_event(codec, - codec_dai->playback.stream_name, - SND_SOC_DAPM_STREAM_START); - else - snd_soc_dapm_stream_event(codec, - codec_dai->capture.stream_name, - SND_SOC_DAPM_STREAM_START); - - snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON); - snd_soc_dai_digital_mute(codec_dai, 0); - - } else { - /* codec already powered - power on widgets */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - snd_soc_dapm_stream_event(codec, - codec_dai->playback.stream_name, - SND_SOC_DAPM_STREAM_START); - else - snd_soc_dapm_stream_event(codec, - codec_dai->capture.stream_name, - SND_SOC_DAPM_STREAM_START); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + snd_soc_dapm_stream_event(codec, + codec_dai->playback.stream_name, + SND_SOC_DAPM_STREAM_START); + else + snd_soc_dapm_stream_event(codec, + codec_dai->capture.stream_name, + SND_SOC_DAPM_STREAM_START); - snd_soc_dai_digital_mute(codec_dai, 0); - } + snd_soc_dai_digital_mute(codec_dai, 0); out: mutex_unlock(&pcm_mutex); @@ -521,6 +515,8 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, } } + machine->rate = params_rate(params); + out: mutex_unlock(&pcm_mutex); return ret; @@ -632,6 +628,12 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) struct snd_soc_codec *codec = card->codec; int i; + /* If the initialization of this soc device failed, there is no codec + * associated with it. Just bail out in this case. + */ + if (!codec) + return 0; + /* Due to the resume being scheduled into a workqueue we could * suspend before that's finished - wait for it to complete. */ @@ -1334,6 +1336,7 @@ int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid) return ret; } + codec->socdev = socdev; codec->card->dev = socdev->dev; codec->card->private_data = codec; strncpy(codec->card->driver, codec->name, sizeof(codec->card->driver)); @@ -1744,7 +1747,7 @@ int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol, { int max = kcontrol->private_value; - if (max == 1) + if (max == 1 && !strstr(kcontrol->id.name, " Volume")) uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; else uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; @@ -1774,7 +1777,7 @@ int snd_soc_info_volsw(struct snd_kcontrol *kcontrol, unsigned int shift = mc->shift; unsigned int rshift = mc->rshift; - if (max == 1) + if (max == 1 && !strstr(kcontrol->id.name, " Volume")) uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; else uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; @@ -1881,7 +1884,7 @@ int snd_soc_info_volsw_2r(struct snd_kcontrol *kcontrol, (struct soc_mixer_control *)kcontrol->private_value; int max = mc->max; - if (max == 1) + if (max == 1 && !strstr(kcontrol->id.name, " Volume")) uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; else uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; @@ -2065,7 +2068,7 @@ EXPORT_SYMBOL_GPL(snd_soc_put_volsw_s8); int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id, unsigned int freq, int dir) { - if (dai->ops->set_sysclk) + if (dai->ops && dai->ops->set_sysclk) return dai->ops->set_sysclk(dai, clk_id, freq, dir); else return -EINVAL; @@ -2085,7 +2088,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk); int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) { - if (dai->ops->set_clkdiv) + if (dai->ops && dai->ops->set_clkdiv) return dai->ops->set_clkdiv(dai, div_id, div); else return -EINVAL; @@ -2104,7 +2107,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_clkdiv); int snd_soc_dai_set_pll(struct snd_soc_dai *dai, int pll_id, unsigned int freq_in, unsigned int freq_out) { - if (dai->ops->set_pll) + if (dai->ops && dai->ops->set_pll) return dai->ops->set_pll(dai, pll_id, freq_in, freq_out); else return -EINVAL; @@ -2120,7 +2123,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll); */ int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { - if (dai->ops->set_fmt) + if (dai->ops && dai->ops->set_fmt) return dai->ops->set_fmt(dai, fmt); else return -EINVAL; @@ -2139,7 +2142,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_fmt); int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int mask, int slots) { - if (dai->ops->set_sysclk) + if (dai->ops && dai->ops->set_tdm_slot) return dai->ops->set_tdm_slot(dai, mask, slots); else return -EINVAL; @@ -2155,7 +2158,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tdm_slot); */ int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate) { - if (dai->ops->set_sysclk) + if (dai->ops && dai->ops->set_tristate) return dai->ops->set_tristate(dai, tristate); else return -EINVAL; @@ -2171,7 +2174,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tristate); */ int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute) { - if (dai->ops->digital_mute) + if (dai->ops && dai->ops->digital_mute) return dai->ops->digital_mute(dai, mute); else return -EINVAL; @@ -2352,6 +2355,39 @@ void snd_soc_unregister_platform(struct snd_soc_platform *platform) } EXPORT_SYMBOL_GPL(snd_soc_unregister_platform); +static u64 codec_format_map[] = { + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE, + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE, + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE, + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE, + SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE, + SNDRV_PCM_FMTBIT_U32_LE | SNDRV_PCM_FMTBIT_U32_BE, + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3BE, + SNDRV_PCM_FMTBIT_U24_3LE | SNDRV_PCM_FMTBIT_U24_3BE, + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE, + SNDRV_PCM_FMTBIT_U20_3LE | SNDRV_PCM_FMTBIT_U20_3BE, + SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE, + SNDRV_PCM_FMTBIT_U18_3LE | SNDRV_PCM_FMTBIT_U18_3BE, + SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE, + SNDRV_PCM_FMTBIT_FLOAT64_LE | SNDRV_PCM_FMTBIT_FLOAT64_BE, + SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE + | SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE, +}; + +/* Fix up the DAI formats for endianness: codecs don't actually see + * the endianness of the data but we're using the CPU format + * definitions which do need to include endianness so we ensure that + * codec DAIs always have both big and little endian variants set. + */ +static void fixup_codec_formats(struct snd_soc_pcm_stream *stream) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(codec_format_map); i++) + if (stream->formats & codec_format_map[i]) + stream->formats |= codec_format_map[i]; +} + /** * snd_soc_register_codec - Register a codec with the ASoC core * @@ -2359,6 +2395,8 @@ EXPORT_SYMBOL_GPL(snd_soc_unregister_platform); */ int snd_soc_register_codec(struct snd_soc_codec *codec) { + int i; + if (!codec->name) return -EINVAL; @@ -2368,6 +2406,11 @@ int snd_soc_register_codec(struct snd_soc_codec *codec) INIT_LIST_HEAD(&codec->list); + for (i = 0; i < codec->num_dai; i++) { + fixup_codec_formats(&codec->dai[i].playback); + fixup_codec_formats(&codec->dai[i].capture); + } + mutex_lock(&client_mutex); list_add(&codec->list, &codec_list); snd_soc_instantiate_cards(); diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 735903a..21c6907 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -12,7 +12,7 @@ * Features: * o Changes power status of internal codec blocks depending on the * dynamic configuration of codec internal audio paths and active - * DAC's/ADC's. + * DACs/ADCs. * o Platform power domain - can support external components i.e. amps and * mic/meadphone insertion events. * o Automatic Mic Bias support @@ -52,23 +52,21 @@ /* dapm power sequences - make this per codec in the future */ static int dapm_up_seq[] = { - snd_soc_dapm_pre, snd_soc_dapm_micbias, snd_soc_dapm_mic, - snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_dac, - snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_pga, - snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, snd_soc_dapm_post + snd_soc_dapm_pre, snd_soc_dapm_supply, snd_soc_dapm_micbias, + snd_soc_dapm_mic, snd_soc_dapm_mux, snd_soc_dapm_value_mux, + snd_soc_dapm_dac, snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl, + snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, + snd_soc_dapm_post }; static int dapm_down_seq[] = { snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer, snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias, - snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_post + snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_supply, + snd_soc_dapm_post }; -static int dapm_status = 1; -module_param(dapm_status, int, 0); -MODULE_PARM_DESC(dapm_status, "enable DPM sysfs entries"); - static void pop_wait(u32 pop_time) { if (pop_time) @@ -96,6 +94,48 @@ static inline struct snd_soc_dapm_widget *dapm_cnew_widget( return kmemdup(_widget, sizeof(*_widget), GFP_KERNEL); } +/** + * snd_soc_dapm_set_bias_level - set the bias level for the system + * @socdev: audio device + * @level: level to configure + * + * Configure the bias (power) levels for the SoC audio device. + * + * Returns 0 for success else error. + */ +static int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev, + enum snd_soc_bias_level level) +{ + struct snd_soc_card *card = socdev->card; + struct snd_soc_codec *codec = socdev->card->codec; + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_ON: + dev_dbg(socdev->dev, "Setting full bias\n"); + break; + case SND_SOC_BIAS_PREPARE: + dev_dbg(socdev->dev, "Setting bias prepare\n"); + break; + case SND_SOC_BIAS_STANDBY: + dev_dbg(socdev->dev, "Setting standby bias\n"); + break; + case SND_SOC_BIAS_OFF: + dev_dbg(socdev->dev, "Setting bias off\n"); + break; + default: + dev_err(socdev->dev, "Setting invalid bias %d\n", level); + return -EINVAL; + } + + if (card->set_bias_level) + ret = card->set_bias_level(card, level); + if (ret == 0 && codec->set_bias_level) + ret = codec->set_bias_level(codec, level); + + return ret; +} + /* set up initial codec paths */ static void dapm_set_path_status(struct snd_soc_dapm_widget *w, struct snd_soc_dapm_path *p, int i) @@ -165,6 +205,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w, case snd_soc_dapm_dac: case snd_soc_dapm_micbias: case snd_soc_dapm_vmid: + case snd_soc_dapm_supply: p->connect = 1; break; /* does effect routing - dynamically connected */ @@ -179,7 +220,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w, } } -/* connect mux widget to it's interconnecting audio paths */ +/* connect mux widget to its interconnecting audio paths */ static int dapm_connect_mux(struct snd_soc_codec *codec, struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest, struct snd_soc_dapm_path *path, const char *control_name, @@ -202,7 +243,7 @@ static int dapm_connect_mux(struct snd_soc_codec *codec, return -ENODEV; } -/* connect mixer widget to it's interconnecting audio paths */ +/* connect mixer widget to its interconnecting audio paths */ static int dapm_connect_mixer(struct snd_soc_codec *codec, struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest, struct snd_soc_dapm_path *path, const char *control_name) @@ -357,8 +398,9 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, path->long_name); ret = snd_ctl_add(codec->card, path->kcontrol); if (ret < 0) { - printk(KERN_ERR "asoc: failed to add dapm kcontrol %s\n", - path->long_name); + printk(KERN_ERR "asoc: failed to add dapm kcontrol %s: %d\n", + path->long_name, + ret); kfree(path->long_name); path->long_name = NULL; return ret; @@ -434,6 +476,9 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget) struct snd_soc_dapm_path *path; int con = 0; + if (widget->id == snd_soc_dapm_supply) + return 0; + if (widget->id == snd_soc_dapm_adc && widget->active) return 1; @@ -470,6 +515,9 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget) struct snd_soc_dapm_path *path; int con = 0; + if (widget->id == snd_soc_dapm_supply) + return 0; + /* active stream ? */ if (widget->id == snd_soc_dapm_dac && widget->active) return 1; @@ -521,84 +569,12 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w, } EXPORT_SYMBOL_GPL(dapm_reg_event); -/* - * Scan a single DAPM widget for a complete audio path and update the - * power status appropriately. +/* Standard power change method, used to apply power changes to most + * widgets. */ -static int dapm_power_widget(struct snd_soc_codec *codec, int event, - struct snd_soc_dapm_widget *w) +static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w) { - int in, out, power_change, power, ret; - - /* vmid - no action */ - if (w->id == snd_soc_dapm_vmid) - return 0; - - /* active ADC */ - if (w->id == snd_soc_dapm_adc && w->active) { - in = is_connected_input_ep(w); - dapm_clear_walk(w->codec); - w->power = (in != 0) ? 1 : 0; - dapm_update_bits(w); - return 0; - } - - /* active DAC */ - if (w->id == snd_soc_dapm_dac && w->active) { - out = is_connected_output_ep(w); - dapm_clear_walk(w->codec); - w->power = (out != 0) ? 1 : 0; - dapm_update_bits(w); - return 0; - } - - /* pre and post event widgets */ - if (w->id == snd_soc_dapm_pre) { - if (!w->event) - return 0; - - if (event == SND_SOC_DAPM_STREAM_START) { - ret = w->event(w, - NULL, SND_SOC_DAPM_PRE_PMU); - if (ret < 0) - return ret; - } else if (event == SND_SOC_DAPM_STREAM_STOP) { - ret = w->event(w, - NULL, SND_SOC_DAPM_PRE_PMD); - if (ret < 0) - return ret; - } - return 0; - } - if (w->id == snd_soc_dapm_post) { - if (!w->event) - return 0; - - if (event == SND_SOC_DAPM_STREAM_START) { - ret = w->event(w, - NULL, SND_SOC_DAPM_POST_PMU); - if (ret < 0) - return ret; - } else if (event == SND_SOC_DAPM_STREAM_STOP) { - ret = w->event(w, - NULL, SND_SOC_DAPM_POST_PMD); - if (ret < 0) - return ret; - } - return 0; - } - - /* all other widgets */ - in = is_connected_input_ep(w); - dapm_clear_walk(w->codec); - out = is_connected_output_ep(w); - dapm_clear_walk(w->codec); - power = (out != 0 && in != 0) ? 1 : 0; - power_change = (w->power == power) ? 0 : 1; - w->power = power; - - if (!power_change) - return 0; + int ret; /* call any power change event handlers */ if (w->event) @@ -607,7 +583,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event, w->name, w->event_flags); /* power up pre event */ - if (power && w->event && + if (w->power && w->event && (w->event_flags & SND_SOC_DAPM_PRE_PMU)) { ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU); if (ret < 0) @@ -615,7 +591,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event, } /* power down pre event */ - if (!power && w->event && + if (!w->power && w->event && (w->event_flags & SND_SOC_DAPM_PRE_PMD)) { ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD); if (ret < 0) @@ -623,17 +599,17 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event, } /* Lower PGA volume to reduce pops */ - if (w->id == snd_soc_dapm_pga && !power) - dapm_set_pga(w, power); + if (w->id == snd_soc_dapm_pga && !w->power) + dapm_set_pga(w, w->power); dapm_update_bits(w); /* Raise PGA volume to reduce pops */ - if (w->id == snd_soc_dapm_pga && power) - dapm_set_pga(w, power); + if (w->id == snd_soc_dapm_pga && w->power) + dapm_set_pga(w, w->power); /* power up post event */ - if (power && w->event && + if (w->power && w->event && (w->event_flags & SND_SOC_DAPM_POST_PMU)) { ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMU); @@ -642,7 +618,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event, } /* power down post event */ - if (!power && w->event && + if (!w->power && w->event && (w->event_flags & SND_SOC_DAPM_POST_PMD)) { ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD); if (ret < 0) @@ -652,6 +628,116 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event, return 0; } +/* Generic check to see if a widget should be powered. + */ +static int dapm_generic_check_power(struct snd_soc_dapm_widget *w) +{ + int in, out; + + in = is_connected_input_ep(w); + dapm_clear_walk(w->codec); + out = is_connected_output_ep(w); + dapm_clear_walk(w->codec); + return out != 0 && in != 0; +} + +/* Check to see if an ADC has power */ +static int dapm_adc_check_power(struct snd_soc_dapm_widget *w) +{ + int in; + + if (w->active) { + in = is_connected_input_ep(w); + dapm_clear_walk(w->codec); + return in != 0; + } else { + return dapm_generic_check_power(w); + } +} + +/* Check to see if a DAC has power */ +static int dapm_dac_check_power(struct snd_soc_dapm_widget *w) +{ + int out; + + if (w->active) { + out = is_connected_output_ep(w); + dapm_clear_walk(w->codec); + return out != 0; + } else { + return dapm_generic_check_power(w); + } +} + +/* Check to see if a power supply is needed */ +static int dapm_supply_check_power(struct snd_soc_dapm_widget *w) +{ + struct snd_soc_dapm_path *path; + int power = 0; + + /* Check if one of our outputs is connected */ + list_for_each_entry(path, &w->sinks, list_source) { + if (path->sink && path->sink->power_check && + path->sink->power_check(path->sink)) { + power = 1; + break; + } + } + + dapm_clear_walk(w->codec); + + return power; +} + +/* + * Scan a single DAPM widget for a complete audio path and update the + * power status appropriately. + */ +static int dapm_power_widget(struct snd_soc_codec *codec, int event, + struct snd_soc_dapm_widget *w) +{ + int ret; + + switch (w->id) { + case snd_soc_dapm_pre: + if (!w->event) + return 0; + + if (event == SND_SOC_DAPM_STREAM_START) { + ret = w->event(w, + NULL, SND_SOC_DAPM_PRE_PMU); + if (ret < 0) + return ret; + } else if (event == SND_SOC_DAPM_STREAM_STOP) { + ret = w->event(w, + NULL, SND_SOC_DAPM_PRE_PMD); + if (ret < 0) + return ret; + } + return 0; + + case snd_soc_dapm_post: + if (!w->event) + return 0; + + if (event == SND_SOC_DAPM_STREAM_START) { + ret = w->event(w, + NULL, SND_SOC_DAPM_POST_PMU); + if (ret < 0) + return ret; + } else if (event == SND_SOC_DAPM_STREAM_STOP) { + ret = w->event(w, + NULL, SND_SOC_DAPM_POST_PMD); + if (ret < 0) + return ret; + } + return 0; + + default: + return dapm_generic_apply_power(w); + } +} + /* * Scan each dapm widget for complete audio path. * A complete path is a route that has valid endpoints i.e.:- @@ -663,31 +749,102 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event, */ static int dapm_power_widgets(struct snd_soc_codec *codec, int event) { + struct snd_soc_device *socdev = codec->socdev; struct snd_soc_dapm_widget *w; - int i, c = 1, *seq = NULL, ret = 0; - - /* do we have a sequenced stream event */ - if (event == SND_SOC_DAPM_STREAM_START) { - c = ARRAY_SIZE(dapm_up_seq); - seq = dapm_up_seq; - } else if (event == SND_SOC_DAPM_STREAM_STOP) { - c = ARRAY_SIZE(dapm_down_seq); - seq = dapm_down_seq; + int ret = 0; + int i, power; + int sys_power = 0; + + INIT_LIST_HEAD(&codec->up_list); + INIT_LIST_HEAD(&codec->down_list); + + /* Check which widgets we need to power and store them in + * lists indicating if they should be powered up or down. + */ + list_for_each_entry(w, &codec->dapm_widgets, list) { + switch (w->id) { + case snd_soc_dapm_pre: + list_add_tail(&codec->down_list, &w->power_list); + break; + case snd_soc_dapm_post: + list_add_tail(&codec->up_list, &w->power_list); + break; + + default: + if (!w->power_check) + continue; + + power = w->power_check(w); + if (power) + sys_power = 1; + + if (w->power == power) + continue; + + if (power) + list_add_tail(&w->power_list, &codec->up_list); + else + list_add_tail(&w->power_list, + &codec->down_list); + + w->power = power; + break; + } } - for (i = 0; i < c; i++) { - list_for_each_entry(w, &codec->dapm_widgets, list) { + /* If we're changing to all on or all off then prepare */ + if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) || + (!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) { + ret = snd_soc_dapm_set_bias_level(socdev, + SND_SOC_BIAS_PREPARE); + if (ret != 0) + pr_err("Failed to prepare bias: %d\n", ret); + } + /* Power down widgets first; try to avoid amplifying pops. */ + for (i = 0; i < ARRAY_SIZE(dapm_down_seq); i++) { + list_for_each_entry(w, &codec->down_list, power_list) { /* is widget in stream order */ - if (seq && seq[i] && w->id != seq[i]) + if (w->id != dapm_down_seq[i]) continue; ret = dapm_power_widget(codec, event, w); if (ret != 0) - return ret; + pr_err("Failed to power down %s: %d\n", + w->name, ret); } } + /* Now power up. */ + for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++) { + list_for_each_entry(w, &codec->up_list, power_list) { + /* is widget in stream order */ + if (w->id != dapm_up_seq[i]) + continue; + + ret = dapm_power_widget(codec, event, w); + if (ret != 0) + pr_err("Failed to power up %s: %d\n", + w->name, ret); + } + } + + /* If we just powered the last thing off drop to standby bias */ + if (codec->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) { + ret = snd_soc_dapm_set_bias_level(socdev, + SND_SOC_BIAS_STANDBY); + if (ret != 0) + pr_err("Failed to apply standby bias: %d\n", ret); + } + + /* If we just powered up then move to active bias */ + if (codec->bias_level == SND_SOC_BIAS_PREPARE && sys_power) { + ret = snd_soc_dapm_set_bias_level(socdev, + SND_SOC_BIAS_ON); + if (ret != 0) + pr_err("Failed to apply active bias: %d\n", ret); + } + return 0; } @@ -723,6 +880,7 @@ static void dbg_dump_dapm(struct snd_soc_codec* codec, const char *action) case snd_soc_dapm_pga: case snd_soc_dapm_mixer: case snd_soc_dapm_mixer_named_ctl: + case snd_soc_dapm_supply: if (w->name) { in = is_connected_input_ep(w); dapm_clear_walk(w->codec); @@ -851,6 +1009,7 @@ static ssize_t dapm_widget_show(struct device *dev, case snd_soc_dapm_pga: case snd_soc_dapm_mixer: case snd_soc_dapm_mixer_named_ctl: + case snd_soc_dapm_supply: if (w->name) count += sprintf(buf + count, "%s: %s\n", w->name, w->power ? "On":"Off"); @@ -883,16 +1042,12 @@ static DEVICE_ATTR(dapm_widget, 0444, dapm_widget_show, NULL); int snd_soc_dapm_sys_add(struct device *dev) { - if (!dapm_status) - return 0; return device_create_file(dev, &dev_attr_dapm_widget); } static void snd_soc_dapm_sys_remove(struct device *dev) { - if (dapm_status) { - device_remove_file(dev, &dev_attr_dapm_widget); - } + device_remove_file(dev, &dev_attr_dapm_widget); } /* free all dapm widgets and resources */ @@ -1015,6 +1170,7 @@ static int snd_soc_dapm_add_route(struct snd_soc_codec *codec, case snd_soc_dapm_vmid: case snd_soc_dapm_pre: case snd_soc_dapm_post: + case snd_soc_dapm_supply: list_add(&path->list, &codec->dapm_paths); list_add(&path->list_sink, &wsink->sources); list_add(&path->list_source, &wsource->sinks); @@ -1108,15 +1264,22 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec) case snd_soc_dapm_switch: case snd_soc_dapm_mixer: case snd_soc_dapm_mixer_named_ctl: + w->power_check = dapm_generic_check_power; dapm_new_mixer(codec, w); break; case snd_soc_dapm_mux: case snd_soc_dapm_value_mux: + w->power_check = dapm_generic_check_power; dapm_new_mux(codec, w); break; case snd_soc_dapm_adc: + w->power_check = dapm_adc_check_power; + break; case snd_soc_dapm_dac: + w->power_check = dapm_dac_check_power; + break; case snd_soc_dapm_pga: + w->power_check = dapm_generic_check_power; dapm_new_pga(codec, w); break; case snd_soc_dapm_input: @@ -1126,6 +1289,10 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec) case snd_soc_dapm_hp: case snd_soc_dapm_mic: case snd_soc_dapm_line: + w->power_check = dapm_generic_check_power; + break; + case snd_soc_dapm_supply: + w->power_check = dapm_supply_check_power; case snd_soc_dapm_vmid: case snd_soc_dapm_pre: case snd_soc_dapm_post: @@ -1626,35 +1793,11 @@ int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event); /** - * snd_soc_dapm_set_bias_level - set the bias level for the system - * @socdev: audio device - * @level: level to configure - * - * Configure the bias (power) levels for the SoC audio device. - * - * Returns 0 for success else error. - */ -int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev, - enum snd_soc_bias_level level) -{ - struct snd_soc_card *card = socdev->card; - struct snd_soc_codec *codec = socdev->card->codec; - int ret = 0; - - if (card->set_bias_level) - ret = card->set_bias_level(card, level); - if (ret == 0 && codec->set_bias_level) - ret = codec->set_bias_level(codec, level); - - return ret; -} - -/** * snd_soc_dapm_enable_pin - enable pin. * @codec: SoC codec * @pin: pin name * - * Enables input/output pin and it's parents or children widgets iff there is + * Enables input/output pin and its parents or children widgets iff there is * a valid audio route and active audio stream. * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to * do any widget power switching. @@ -1670,7 +1813,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_enable_pin); * @codec: SoC codec * @pin: pin name * - * Disables input/output pin and it's parents or children widgets. + * Disables input/output pin and its parents or children widgets. * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to * do any widget power switching. */ diff --git a/sound/soc/txx9/Kconfig b/sound/soc/txx9/Kconfig new file mode 100644 index 0000000..ebc9327 --- /dev/null +++ b/sound/soc/txx9/Kconfig @@ -0,0 +1,29 @@ +## +## TXx9 ACLC +## +config SND_SOC_TXX9ACLC + tristate "SoC Audio for TXx9" + depends on HAS_TXX9_ACLC && TXX9_DMAC + help + This option enables support for the AC Link Controllers in TXx9 SoC. + +config HAS_TXX9_ACLC + bool + +config SND_SOC_TXX9ACLC_AC97 + tristate + select AC97_BUS + select SND_AC97_CODEC + select SND_SOC_AC97_BUS + + +## +## Boards +## +config SND_SOC_TXX9ACLC_GENERIC + tristate "Generic TXx9 ACLC sound machine" + depends on SND_SOC_TXX9ACLC + select SND_SOC_TXX9ACLC_AC97 + select SND_SOC_AC97_CODEC + help + This is a generic AC97 sound machine for use in TXx9 based systems. diff --git a/sound/soc/txx9/Makefile b/sound/soc/txx9/Makefile new file mode 100644 index 0000000..551f16c --- /dev/null +++ b/sound/soc/txx9/Makefile @@ -0,0 +1,11 @@ +# Platform +snd-soc-txx9aclc-objs := txx9aclc.o +snd-soc-txx9aclc-ac97-objs := txx9aclc-ac97.o + +obj-$(CONFIG_SND_SOC_TXX9ACLC) += snd-soc-txx9aclc.o +obj-$(CONFIG_SND_SOC_TXX9ACLC_AC97) += snd-soc-txx9aclc-ac97.o + +# Machine +snd-soc-txx9aclc-generic-objs := txx9aclc-generic.o + +obj-$(CONFIG_SND_SOC_TXX9ACLC_GENERIC) += snd-soc-txx9aclc-generic.o diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c new file mode 100644 index 0000000..0f83bdb --- /dev/null +++ b/sound/soc/txx9/txx9aclc-ac97.c @@ -0,0 +1,255 @@ +/* + * TXx9 ACLC AC97 driver + * + * Copyright (C) 2009 Atsushi Nemoto + * + * Based on RBTX49xx patch from CELF patch archive. + * (C) Copyright TOSHIBA CORPORATION 2004-2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "txx9aclc.h" + +#define AC97_DIR \ + (SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE) + +#define AC97_RATES \ + SNDRV_PCM_RATE_8000_48000 + +#ifdef __BIG_ENDIAN +#define AC97_FMTS SNDRV_PCM_FMTBIT_S16_BE +#else +#define AC97_FMTS SNDRV_PCM_FMTBIT_S16_LE +#endif + +static DECLARE_WAIT_QUEUE_HEAD(ac97_waitq); + +/* REVISIT: How to find txx9aclc_soc_device from snd_ac97? */ +static struct txx9aclc_soc_device *txx9aclc_soc_dev; + +static int txx9aclc_regready(struct txx9aclc_soc_device *dev) +{ + struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev); + + return __raw_readl(drvdata->base + ACINTSTS) & ACINT_REGACCRDY; +} + +/* AC97 controller reads codec register */ +static unsigned short txx9aclc_ac97_read(struct snd_ac97 *ac97, + unsigned short reg) +{ + struct txx9aclc_soc_device *dev = txx9aclc_soc_dev; + struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev); + void __iomem *base = drvdata->base; + u32 dat; + + if (!(__raw_readl(base + ACINTSTS) & ACINT_CODECRDY(ac97->num))) + return 0xffff; + reg |= ac97->num << 7; + dat = (reg << ACREGACC_REG_SHIFT) | ACREGACC_READ; + __raw_writel(dat, base + ACREGACC); + __raw_writel(ACINT_REGACCRDY, base + ACINTEN); + if (!wait_event_timeout(ac97_waitq, txx9aclc_regready(dev), HZ)) { + __raw_writel(ACINT_REGACCRDY, base + ACINTDIS); + dev_err(dev->soc_dev.dev, "ac97 read timeout (reg %#x)\n", reg); + dat = 0xffff; + goto done; + } + dat = __raw_readl(base + ACREGACC); + if (((dat >> ACREGACC_REG_SHIFT) & 0xff) != reg) { + dev_err(dev->soc_dev.dev, "reg mismatch %x with %x\n", + dat, reg); + dat = 0xffff; + goto done; + } + dat = (dat >> ACREGACC_DAT_SHIFT) & 0xffff; +done: + __raw_writel(ACINT_REGACCRDY, base + ACINTDIS); + return dat; +} + +/* AC97 controller writes to codec register */ +static void txx9aclc_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + struct txx9aclc_soc_device *dev = txx9aclc_soc_dev; + struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev); + void __iomem *base = drvdata->base; + + __raw_writel(((reg | (ac97->num << 7)) << ACREGACC_REG_SHIFT) | + (val << ACREGACC_DAT_SHIFT), + base + ACREGACC); + __raw_writel(ACINT_REGACCRDY, base + ACINTEN); + if (!wait_event_timeout(ac97_waitq, txx9aclc_regready(dev), HZ)) { + dev_err(dev->soc_dev.dev, + "ac97 write timeout (reg %#x)\n", reg); + } + __raw_writel(ACINT_REGACCRDY, base + ACINTDIS); +} + +static void txx9aclc_ac97_cold_reset(struct snd_ac97 *ac97) +{ + struct txx9aclc_soc_device *dev = txx9aclc_soc_dev; + struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev); + void __iomem *base = drvdata->base; + u32 ready = ACINT_CODECRDY(ac97->num) | ACINT_REGACCRDY; + + __raw_writel(ACCTL_ENLINK, base + ACCTLDIS); + mmiowb(); + udelay(1); + __raw_writel(ACCTL_ENLINK, base + ACCTLEN); + /* wait for primary codec ready status */ + __raw_writel(ready, base + ACINTEN); + if (!wait_event_timeout(ac97_waitq, + (__raw_readl(base + ACINTSTS) & ready) == ready, + HZ)) { + dev_err(&ac97->dev, "primary codec is not ready " + "(status %#x)\n", + __raw_readl(base + ACINTSTS)); + } + __raw_writel(ACINT_REGACCRDY, base + ACINTSTS); + __raw_writel(ready, base + ACINTDIS); +} + +/* AC97 controller operations */ +struct snd_ac97_bus_ops soc_ac97_ops = { + .read = txx9aclc_ac97_read, + .write = txx9aclc_ac97_write, + .reset = txx9aclc_ac97_cold_reset, +}; +EXPORT_SYMBOL_GPL(soc_ac97_ops); + +static irqreturn_t txx9aclc_ac97_irq(int irq, void *dev_id) +{ + struct txx9aclc_plat_drvdata *drvdata = dev_id; + void __iomem *base = drvdata->base; + + __raw_writel(__raw_readl(base + ACINTMSTS), base + ACINTDIS); + wake_up(&ac97_waitq); + return IRQ_HANDLED; +} + +static int txx9aclc_ac97_probe(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct txx9aclc_soc_device *dev = + container_of(socdev, struct txx9aclc_soc_device, soc_dev); + + dev->aclc_pdev = to_platform_device(dai->dev); + txx9aclc_soc_dev = dev; + return 0; +} + +static void txx9aclc_ac97_remove(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct platform_device *aclc_pdev = to_platform_device(dai->dev); + struct txx9aclc_plat_drvdata *drvdata = platform_get_drvdata(aclc_pdev); + + /* disable AC-link */ + __raw_writel(ACCTL_ENLINK, drvdata->base + ACCTLDIS); + txx9aclc_soc_dev = NULL; +} + +struct snd_soc_dai txx9aclc_ac97_dai = { + .name = "txx9aclc_ac97", + .ac97_control = 1, + .probe = txx9aclc_ac97_probe, + .remove = txx9aclc_ac97_remove, + .playback = { + .rates = AC97_RATES, + .formats = AC97_FMTS, + .channels_min = 2, + .channels_max = 2, + }, + .capture = { + .rates = AC97_RATES, + .formats = AC97_FMTS, + .channels_min = 2, + .channels_max = 2, + }, +}; +EXPORT_SYMBOL_GPL(txx9aclc_ac97_dai); + +static int __devinit txx9aclc_ac97_dev_probe(struct platform_device *pdev) +{ + struct txx9aclc_plat_drvdata *drvdata; + struct resource *r; + int err; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -EBUSY; + + if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r), + dev_name(&pdev->dev))) + return -EBUSY; + + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + platform_set_drvdata(pdev, drvdata); + drvdata->physbase = r->start; + if (sizeof(drvdata->physbase) > sizeof(r->start) && + r->start >= TXX9_DIRECTMAP_BASE && + r->start < TXX9_DIRECTMAP_BASE + 0x400000) + drvdata->physbase |= 0xf00000000ull; + drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!drvdata->base) + return -EBUSY; + err = devm_request_irq(&pdev->dev, irq, txx9aclc_ac97_irq, + IRQF_DISABLED, dev_name(&pdev->dev), drvdata); + if (err < 0) + return err; + + txx9aclc_ac97_dai.dev = &pdev->dev; + return snd_soc_register_dai(&txx9aclc_ac97_dai); +} + +static int __devexit txx9aclc_ac97_dev_remove(struct platform_device *pdev) +{ + snd_soc_unregister_dai(&txx9aclc_ac97_dai); + return 0; +} + +static struct platform_driver txx9aclc_ac97_driver = { + .probe = txx9aclc_ac97_dev_probe, + .remove = __devexit_p(txx9aclc_ac97_dev_remove), + .driver = { + .name = "txx9aclc-ac97", + .owner = THIS_MODULE, + }, +}; + +static int __init txx9aclc_ac97_init(void) +{ + return platform_driver_register(&txx9aclc_ac97_driver); +} + +static void __exit txx9aclc_ac97_exit(void) +{ + platform_driver_unregister(&txx9aclc_ac97_driver); +} + +module_init(txx9aclc_ac97_init); +module_exit(txx9aclc_ac97_exit); + +MODULE_AUTHOR("Atsushi Nemoto "); +MODULE_DESCRIPTION("TXx9 ACLC AC97 driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/txx9/txx9aclc-generic.c b/sound/soc/txx9/txx9aclc-generic.c new file mode 100644 index 0000000..3175de9 --- /dev/null +++ b/sound/soc/txx9/txx9aclc-generic.c @@ -0,0 +1,98 @@ +/* + * Generic TXx9 ACLC machine driver + * + * Copyright (C) 2009 Atsushi Nemoto + * + * Based on RBTX49xx patch from CELF patch archive. + * (C) Copyright TOSHIBA CORPORATION 2004-2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This is a very generic AC97 sound machine driver for boards which + * have (AC97) audio at ACLC (e.g. RBTX49XX boards). + */ + +#include +#include +#include +#include +#include +#include "../codecs/ac97.h" +#include "txx9aclc.h" + +static struct snd_soc_dai_link txx9aclc_generic_dai = { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &txx9aclc_ac97_dai, + .codec_dai = &ac97_dai, +}; + +static struct snd_soc_card txx9aclc_generic_card = { + .name = "Generic TXx9 ACLC Audio", + .platform = &txx9aclc_soc_platform, + .dai_link = &txx9aclc_generic_dai, + .num_links = 1, +}; + +static struct txx9aclc_soc_device txx9aclc_generic_soc_device = { + .soc_dev = { + .card = &txx9aclc_generic_card, + .codec_dev = &soc_codec_dev_ac97, + }, +}; + +static int __init txx9aclc_generic_probe(struct platform_device *pdev) +{ + struct txx9aclc_soc_device *dev = &txx9aclc_generic_soc_device; + struct platform_device *soc_pdev; + int ret; + + soc_pdev = platform_device_alloc("soc-audio", -1); + if (!soc_pdev) + return -ENOMEM; + platform_set_drvdata(soc_pdev, &dev->soc_dev); + dev->soc_dev.dev = &soc_pdev->dev; + ret = platform_device_add(soc_pdev); + if (ret) { + platform_device_put(soc_pdev); + return ret; + } + platform_set_drvdata(pdev, soc_pdev); + return 0; +} + +static int __exit txx9aclc_generic_remove(struct platform_device *pdev) +{ + struct platform_device *soc_pdev = platform_get_drvdata(pdev); + + platform_device_unregister(soc_pdev); + return 0; +} + +static struct platform_driver txx9aclc_generic_driver = { + .remove = txx9aclc_generic_remove, + .driver = { + .name = "txx9aclc-generic", + .owner = THIS_MODULE, + }, +}; + +static int __init txx9aclc_generic_init(void) +{ + return platform_driver_probe(&txx9aclc_generic_driver, + txx9aclc_generic_probe); +} + +static void __exit txx9aclc_generic_exit(void) +{ + platform_driver_unregister(&txx9aclc_generic_driver); +} + +module_init(txx9aclc_generic_init); +module_exit(txx9aclc_generic_exit); + +MODULE_AUTHOR("Atsushi Nemoto "); +MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c new file mode 100644 index 0000000..fa33661 --- /dev/null +++ b/sound/soc/txx9/txx9aclc.c @@ -0,0 +1,430 @@ +/* + * Generic TXx9 ACLC platform driver + * + * Copyright (C) 2009 Atsushi Nemoto + * + * Based on RBTX49xx patch from CELF patch archive. + * (C) Copyright TOSHIBA CORPORATION 2004-2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "txx9aclc.h" + +static const struct snd_pcm_hardware txx9aclc_pcm_hardware = { + /* + * REVISIT: SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID + * needs more works for noncoherent MIPS. + */ + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BATCH | + SNDRV_PCM_INFO_PAUSE, +#ifdef __BIG_ENDIAN + .formats = SNDRV_PCM_FMTBIT_S16_BE, +#else + .formats = SNDRV_PCM_FMTBIT_S16_LE, +#endif + .period_bytes_min = 1024, + .period_bytes_max = 8 * 1024, + .periods_min = 2, + .periods_max = 4096, + .buffer_bytes_max = 32 * 1024, +}; + +static int txx9aclc_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct snd_soc_device *socdev = rtd->socdev; + struct snd_pcm_runtime *runtime = substream->runtime; + struct txx9aclc_dmadata *dmadata = runtime->private_data; + int ret; + + ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); + if (ret < 0) + return ret; + + dev_dbg(socdev->dev, + "runtime->dma_area = %#lx dma_addr = %#lx dma_bytes = %zd " + "runtime->min_align %ld\n", + (unsigned long)runtime->dma_area, + (unsigned long)runtime->dma_addr, runtime->dma_bytes, + runtime->min_align); + dev_dbg(socdev->dev, + "periods %d period_bytes %d stream %d\n", + params_periods(params), params_period_bytes(params), + substream->stream); + + dmadata->substream = substream; + dmadata->pos = 0; + return 0; +} + +static int txx9aclc_pcm_hw_free(struct snd_pcm_substream *substream) +{ + return snd_pcm_lib_free_pages(substream); +} + +static int txx9aclc_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct txx9aclc_dmadata *dmadata = runtime->private_data; + + dmadata->dma_addr = runtime->dma_addr; + dmadata->buffer_bytes = snd_pcm_lib_buffer_bytes(substream); + dmadata->period_bytes = snd_pcm_lib_period_bytes(substream); + + if (dmadata->buffer_bytes == dmadata->period_bytes) { + dmadata->frag_bytes = dmadata->period_bytes >> 1; + dmadata->frags = 2; + } else { + dmadata->frag_bytes = dmadata->period_bytes; + dmadata->frags = dmadata->buffer_bytes / dmadata->period_bytes; + } + dmadata->frag_count = 0; + dmadata->pos = 0; + return 0; +} + +static void txx9aclc_dma_complete(void *arg) +{ + struct txx9aclc_dmadata *dmadata = arg; + unsigned long flags; + + /* dma completion handler cannot submit new operations */ + spin_lock_irqsave(&dmadata->dma_lock, flags); + if (dmadata->frag_count >= 0) { + dmadata->dmacount--; + BUG_ON(dmadata->dmacount < 0); + tasklet_schedule(&dmadata->tasklet); + } + spin_unlock_irqrestore(&dmadata->dma_lock, flags); +} + +static struct dma_async_tx_descriptor * +txx9aclc_dma_submit(struct txx9aclc_dmadata *dmadata, dma_addr_t buf_dma_addr) +{ + struct dma_chan *chan = dmadata->dma_chan; + struct dma_async_tx_descriptor *desc; + struct scatterlist sg; + + sg_init_table(&sg, 1); + sg_set_page(&sg, pfn_to_page(PFN_DOWN(buf_dma_addr)), + dmadata->frag_bytes, buf_dma_addr & (PAGE_SIZE - 1)); + sg_dma_address(&sg) = buf_dma_addr; + desc = chan->device->device_prep_slave_sg(chan, &sg, 1, + dmadata->substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + DMA_TO_DEVICE : DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(&chan->dev->device, "cannot prepare slave dma\n"); + return NULL; + } + desc->callback = txx9aclc_dma_complete; + desc->callback_param = dmadata; + desc->tx_submit(desc); + return desc; +} + +#define NR_DMA_CHAIN 2 + +static void txx9aclc_dma_tasklet(unsigned long data) +{ + struct txx9aclc_dmadata *dmadata = (struct txx9aclc_dmadata *)data; + struct dma_chan *chan = dmadata->dma_chan; + struct dma_async_tx_descriptor *desc; + struct snd_pcm_substream *substream = dmadata->substream; + u32 ctlbit = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + ACCTL_AUDODMA : ACCTL_AUDIDMA; + int i; + unsigned long flags; + + spin_lock_irqsave(&dmadata->dma_lock, flags); + if (dmadata->frag_count < 0) { + struct txx9aclc_soc_device *dev = + container_of(dmadata, struct txx9aclc_soc_device, + dmadata[substream->stream]); + struct txx9aclc_plat_drvdata *drvdata = + txx9aclc_get_plat_drvdata(dev); + void __iomem *base = drvdata->base; + + spin_unlock_irqrestore(&dmadata->dma_lock, flags); + chan->device->device_terminate_all(chan); + /* first time */ + for (i = 0; i < NR_DMA_CHAIN; i++) { + desc = txx9aclc_dma_submit(dmadata, + dmadata->dma_addr + i * dmadata->frag_bytes); + if (!desc) + return; + } + dmadata->dmacount = NR_DMA_CHAIN; + chan->device->device_issue_pending(chan); + spin_lock_irqsave(&dmadata->dma_lock, flags); + __raw_writel(ctlbit, base + ACCTLEN); + dmadata->frag_count = NR_DMA_CHAIN % dmadata->frags; + spin_unlock_irqrestore(&dmadata->dma_lock, flags); + return; + } + BUG_ON(dmadata->dmacount >= NR_DMA_CHAIN); + while (dmadata->dmacount < NR_DMA_CHAIN) { + dmadata->dmacount++; + spin_unlock_irqrestore(&dmadata->dma_lock, flags); + desc = txx9aclc_dma_submit(dmadata, + dmadata->dma_addr + + dmadata->frag_count * dmadata->frag_bytes); + if (!desc) + return; + chan->device->device_issue_pending(chan); + + spin_lock_irqsave(&dmadata->dma_lock, flags); + dmadata->frag_count++; + dmadata->frag_count %= dmadata->frags; + dmadata->pos += dmadata->frag_bytes; + dmadata->pos %= dmadata->buffer_bytes; + if ((dmadata->frag_count * dmadata->frag_bytes) % + dmadata->period_bytes == 0) + snd_pcm_period_elapsed(substream); + } + spin_unlock_irqrestore(&dmadata->dma_lock, flags); +} + +static int txx9aclc_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct txx9aclc_dmadata *dmadata = substream->runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct txx9aclc_soc_device *dev = + container_of(rtd->socdev, struct txx9aclc_soc_device, soc_dev); + struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev); + void __iomem *base = drvdata->base; + unsigned long flags; + int ret = 0; + u32 ctlbit = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + ACCTL_AUDODMA : ACCTL_AUDIDMA; + + spin_lock_irqsave(&dmadata->dma_lock, flags); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + dmadata->frag_count = -1; + tasklet_schedule(&dmadata->tasklet); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: + __raw_writel(ctlbit, base + ACCTLDIS); + break; + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: + __raw_writel(ctlbit, base + ACCTLEN); + break; + default: + ret = -EINVAL; + } + spin_unlock_irqrestore(&dmadata->dma_lock, flags); + return ret; +} + +static snd_pcm_uframes_t +txx9aclc_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct txx9aclc_dmadata *dmadata = substream->runtime->private_data; + + return bytes_to_frames(substream->runtime, dmadata->pos); +} + +static int txx9aclc_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct txx9aclc_soc_device *dev = + container_of(rtd->socdev, struct txx9aclc_soc_device, soc_dev); + struct txx9aclc_dmadata *dmadata = &dev->dmadata[substream->stream]; + int ret; + + ret = snd_soc_set_runtime_hwparams(substream, &txx9aclc_pcm_hardware); + if (ret) + return ret; + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(substream->runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + return ret; + substream->runtime->private_data = dmadata; + return 0; +} + +static int txx9aclc_pcm_close(struct snd_pcm_substream *substream) +{ + struct txx9aclc_dmadata *dmadata = substream->runtime->private_data; + struct dma_chan *chan = dmadata->dma_chan; + + dmadata->frag_count = -1; + chan->device->device_terminate_all(chan); + return 0; +} + +static struct snd_pcm_ops txx9aclc_pcm_ops = { + .open = txx9aclc_pcm_open, + .close = txx9aclc_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = txx9aclc_pcm_hw_params, + .hw_free = txx9aclc_pcm_hw_free, + .prepare = txx9aclc_pcm_prepare, + .trigger = txx9aclc_pcm_trigger, + .pointer = txx9aclc_pcm_pointer, +}; + +static void txx9aclc_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + snd_pcm_lib_preallocate_free_for_all(pcm); +} + +static int txx9aclc_pcm_new(struct snd_card *card, struct snd_soc_dai *dai, + struct snd_pcm *pcm) +{ + return snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, + card->dev, 64 * 1024, 4 * 1024 * 1024); +} + +static bool filter(struct dma_chan *chan, void *param) +{ + struct txx9aclc_dmadata *dmadata = param; + char devname[BUS_ID_SIZE + 2]; + + sprintf(devname, "%s.%d", dmadata->dma_res->name, + (int)dmadata->dma_res->start); + if (strcmp(dev_name(chan->device->dev), devname) == 0) { + chan->private = &dmadata->dma_slave; + return true; + } + return false; +} + +static int txx9aclc_dma_init(struct txx9aclc_soc_device *dev, + struct txx9aclc_dmadata *dmadata) +{ + struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev); + struct txx9dmac_slave *ds = &dmadata->dma_slave; + dma_cap_mask_t mask; + + spin_lock_init(&dmadata->dma_lock); + + ds->reg_width = sizeof(u32); + if (dmadata->stream == SNDRV_PCM_STREAM_PLAYBACK) { + ds->tx_reg = drvdata->physbase + ACAUDODAT; + ds->rx_reg = 0; + } else { + ds->tx_reg = 0; + ds->rx_reg = drvdata->physbase + ACAUDIDAT; + } + + /* Try to grab a DMA channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + dmadata->dma_chan = dma_request_channel(mask, filter, dmadata); + if (!dmadata->dma_chan) { + dev_err(dev->soc_dev.dev, + "DMA channel for %s is not available\n", + dmadata->stream == SNDRV_PCM_STREAM_PLAYBACK ? + "playback" : "capture"); + return -EBUSY; + } + tasklet_init(&dmadata->tasklet, txx9aclc_dma_tasklet, + (unsigned long)dmadata); + return 0; +} + +static int txx9aclc_pcm_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct txx9aclc_soc_device *dev = + container_of(socdev, struct txx9aclc_soc_device, soc_dev); + struct resource *r; + int i; + int ret; + + dev->dmadata[0].stream = SNDRV_PCM_STREAM_PLAYBACK; + dev->dmadata[1].stream = SNDRV_PCM_STREAM_CAPTURE; + for (i = 0; i < 2; i++) { + r = platform_get_resource(dev->aclc_pdev, IORESOURCE_DMA, i); + if (!r) { + ret = -EBUSY; + goto exit; + } + dev->dmadata[i].dma_res = r; + ret = txx9aclc_dma_init(dev, &dev->dmadata[i]); + if (ret) + goto exit; + } + return 0; + +exit: + for (i = 0; i < 2; i++) { + if (dev->dmadata[i].dma_chan) + dma_release_channel(dev->dmadata[i].dma_chan); + dev->dmadata[i].dma_chan = NULL; + } + return ret; +} + +static int txx9aclc_pcm_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct txx9aclc_soc_device *dev = + container_of(socdev, struct txx9aclc_soc_device, soc_dev); + struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev); + void __iomem *base = drvdata->base; + int i; + + /* disable all FIFO DMAs */ + __raw_writel(ACCTL_AUDODMA | ACCTL_AUDIDMA, base + ACCTLDIS); + /* dummy R/W to clear pending DMAREQ if any */ + __raw_writel(__raw_readl(base + ACAUDIDAT), base + ACAUDODAT); + + for (i = 0; i < 2; i++) { + struct txx9aclc_dmadata *dmadata = &dev->dmadata[i]; + struct dma_chan *chan = dmadata->dma_chan; + if (chan) { + dmadata->frag_count = -1; + chan->device->device_terminate_all(chan); + dma_release_channel(chan); + } + dev->dmadata[i].dma_chan = NULL; + } + return 0; +} + +struct snd_soc_platform txx9aclc_soc_platform = { + .name = "txx9aclc-audio", + .probe = txx9aclc_pcm_probe, + .remove = txx9aclc_pcm_remove, + .pcm_ops = &txx9aclc_pcm_ops, + .pcm_new = txx9aclc_pcm_new, + .pcm_free = txx9aclc_pcm_free_dma_buffers, +}; +EXPORT_SYMBOL_GPL(txx9aclc_soc_platform); + +static int __init txx9aclc_soc_platform_init(void) +{ + return snd_soc_register_platform(&txx9aclc_soc_platform); +} + +static void __exit txx9aclc_soc_platform_exit(void) +{ + snd_soc_unregister_platform(&txx9aclc_soc_platform); +} + +module_init(txx9aclc_soc_platform_init); +module_exit(txx9aclc_soc_platform_exit); + +MODULE_AUTHOR("Atsushi Nemoto "); +MODULE_DESCRIPTION("TXx9 ACLC Audio DMA driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/txx9/txx9aclc.h b/sound/soc/txx9/txx9aclc.h new file mode 100644 index 0000000..6769aab --- /dev/null +++ b/sound/soc/txx9/txx9aclc.h @@ -0,0 +1,83 @@ +/* + * TXx9 SoC AC Link Controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __TXX9ACLC_H +#define __TXX9ACLC_H + +#include +#include + +#define ACCTLEN 0x00 /* control enable */ +#define ACCTLDIS 0x04 /* control disable */ +#define ACCTL_ENLINK 0x00000001 /* enable/disable AC-link */ +#define ACCTL_AUDODMA 0x00000100 /* AUDODMA enable/disable */ +#define ACCTL_AUDIDMA 0x00001000 /* AUDIDMA enable/disable */ +#define ACCTL_AUDOEHLT 0x00010000 /* AUDO error halt + enable/disable */ +#define ACCTL_AUDIEHLT 0x00100000 /* AUDI error halt + enable/disable */ +#define ACREGACC 0x08 /* codec register access */ +#define ACREGACC_DAT_SHIFT 0 /* data field */ +#define ACREGACC_REG_SHIFT 16 /* address field */ +#define ACREGACC_CODECID_SHIFT 24 /* CODEC ID field */ +#define ACREGACC_READ 0x80000000 /* CODEC read */ +#define ACREGACC_WRITE 0x00000000 /* CODEC write */ +#define ACINTSTS 0x10 /* interrupt status */ +#define ACINTMSTS 0x14 /* interrupt masked status */ +#define ACINTEN 0x18 /* interrupt enable */ +#define ACINTDIS 0x1c /* interrupt disable */ +#define ACINT_CODECRDY(n) (0x00000001 << (n)) /* CODECn ready */ +#define ACINT_REGACCRDY 0x00000010 /* ACREGACC ready */ +#define ACINT_AUDOERR 0x00000100 /* AUDO underrun error */ +#define ACINT_AUDIERR 0x00001000 /* AUDI overrun error */ +#define ACDMASTS 0x80 /* DMA request status */ +#define ACDMA_AUDO 0x00000001 /* AUDODMA pending */ +#define ACDMA_AUDI 0x00000010 /* AUDIDMA pending */ +#define ACAUDODAT 0xa0 /* audio out data */ +#define ACAUDIDAT 0xb0 /* audio in data */ +#define ACREVID 0xfc /* revision ID */ + +struct txx9aclc_dmadata { + struct resource *dma_res; + struct txx9dmac_slave dma_slave; + struct dma_chan *dma_chan; + struct tasklet_struct tasklet; + spinlock_t dma_lock; + int stream; /* SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE */ + struct snd_pcm_substream *substream; + unsigned long pos; + dma_addr_t dma_addr; + unsigned long buffer_bytes; + unsigned long period_bytes; + unsigned long frag_bytes; + int frags; + int frag_count; + int dmacount; +}; + +struct txx9aclc_plat_drvdata { + void __iomem *base; + u64 physbase; +}; + +struct txx9aclc_soc_device { + struct snd_soc_device soc_dev; + struct platform_device *aclc_pdev; /* for ioresources, drvdata */ + struct txx9aclc_dmadata dmadata[2]; +}; + +static inline struct txx9aclc_plat_drvdata *txx9aclc_get_plat_drvdata( + struct txx9aclc_soc_device *sdev) +{ + return platform_get_drvdata(sdev->aclc_pdev); +} + +extern struct snd_soc_platform txx9aclc_soc_platform; +extern struct snd_soc_dai txx9aclc_ac97_dai; + +#endif /* __TXX9ACLC_H */ diff --git a/sound/synth/Makefile b/sound/synth/Makefile index e99fd76..11eb06a 100644 --- a/sound/synth/Makefile +++ b/sound/synth/Makefile @@ -5,16 +5,8 @@ snd-util-mem-objs := util_mem.o -# -# this function returns: -# "m" - CONFIG_SND_SEQUENCER is m -# - CONFIG_SND_SEQUENCER is undefined -# otherwise parameter #1 value -# -sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1))) - # Toplevel Module Dependency obj-$(CONFIG_SND_EMU10K1) += snd-util-mem.o obj-$(CONFIG_SND_TRIDENT) += snd-util-mem.o -obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-util-mem.o -obj-$(call sequencer,$(CONFIG_SND)) += emux/ +obj-$(CONFIG_SND_SBAWE_SEQ) += snd-util-mem.o +obj-$(CONFIG_SND_SEQUENCER) += emux/ diff --git a/sound/synth/emux/Makefile b/sound/synth/emux/Makefile index b690352..328594e 100644 --- a/sound/synth/emux/Makefile +++ b/sound/synth/emux/Makefile @@ -7,14 +7,6 @@ snd-emux-synth-objs := emux.o emux_synth.o emux_seq.o emux_nrpn.o \ emux_effect.o emux_proc.o emux_hwdep.o soundfont.o \ $(if $(CONFIG_SND_SEQUENCER_OSS),emux_oss.o) -# -# this function returns: -# "m" - CONFIG_SND_SEQUENCER is m -# - CONFIG_SND_SEQUENCER is undefined -# otherwise parameter #1 value -# -sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1))) - # Toplevel Module Dependencies -obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emux-synth.o -obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-emux-synth.o +obj-$(CONFIG_SND_SBAWE_SEQ) += snd-emux-synth.o +obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-emux-synth.o diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index b13ce76..b144513 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -42,10 +42,10 @@ (stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1) static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = { - .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | + .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER), .formats = SNDRV_PCM_FMTBIT_S24_3BE, - .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000), .rate_min = 44100, .rate_max = 0, /* will overwrite later */ @@ -68,7 +68,7 @@ activate_substream(struct snd_usb_caiaqdev *dev, dev->sub_capture[sub->number] = sub; } -static void +static void deactivate_substream(struct snd_usb_caiaqdev *dev, struct snd_pcm_substream *sub) { @@ -118,7 +118,7 @@ static int stream_start(struct snd_usb_caiaqdev *dev) return -EPIPE; } } - + return 0; } @@ -129,7 +129,7 @@ static void stream_stop(struct snd_usb_caiaqdev *dev) debug("%s(%p)\n", __func__, dev); if (!dev->streaming) return; - + dev->streaming = 0; for (i = 0; i < N_URBS; i++) { @@ -154,7 +154,7 @@ static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream) debug("%s(%p)\n", __func__, substream); if (all_substreams_zero(dev->sub_playback) && all_substreams_zero(dev->sub_capture)) { - /* when the last client has stopped streaming, + /* when the last client has stopped streaming, * all sample rates are allowed again */ stream_stop(dev); dev->pcm_info.rates = dev->samplerates; @@ -194,7 +194,7 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; debug("%s(%p)\n", __func__, substream); - + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { dev->period_out_count[index] = BYTES_PER_SAMPLE + 1; dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1; @@ -205,19 +205,19 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream) if (dev->streaming) return 0; - + /* the first client that opens a stream defines the sample rate * setting for all subsequent calls, until the last client closed. */ for (i=0; i < ARRAY_SIZE(rates); i++) if (runtime->rate == rates[i]) dev->pcm_info.rates = 1 << i; - + snd_pcm_limit_hw_rates(runtime); bytes_per_sample = BYTES_PER_SAMPLE; if (dev->spec.data_alignment == 2) bytes_per_sample++; - + bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE) * bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams; @@ -232,7 +232,7 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream) ret = stream_start(dev); if (ret) return ret; - + dev->output_running = 0; wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ); if (!dev->output_running) { @@ -273,7 +273,7 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub) return SNDRV_PCM_POS_XRUN; if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) - return bytes_to_frames(sub->runtime, + return bytes_to_frames(sub->runtime, dev->audio_out_buf_pos[index]); else return bytes_to_frames(sub->runtime, @@ -291,7 +291,7 @@ static struct snd_pcm_ops snd_usb_caiaq_ops = { .trigger = snd_usb_caiaq_pcm_trigger, .pointer = snd_usb_caiaq_pcm_pointer }; - + static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev, struct snd_pcm_substream **subs) { @@ -333,7 +333,7 @@ static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev, struct snd_pcm_runtime *rt = sub->runtime; char *audio_buf = rt->dma_area; int sz = frames_to_bytes(rt, rt->buffer_size); - audio_buf[dev->audio_in_buf_pos[stream]++] + audio_buf[dev->audio_in_buf_pos[stream]++] = usb_buf[i]; dev->period_in_count[stream]++; if (dev->audio_in_buf_pos[stream] == sz) @@ -354,14 +354,14 @@ static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev, for (i = 0; i < iso->actual_length;) { if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) { - for (stream = 0; - stream < dev->n_streams; + for (stream = 0; + stream < dev->n_streams; stream++, i++) { if (dev->first_packet) continue; check_byte = MAKE_CHECKBYTE(dev, stream, i); - + if ((usb_buf[i] & 0x3f) != check_byte) dev->input_panic = 1; @@ -410,21 +410,21 @@ static void read_in_urb(struct snd_usb_caiaqdev *dev, } if ((dev->input_panic || dev->output_panic) && !dev->warned) { - debug("streaming error detected %s %s\n", + debug("streaming error detected %s %s\n", dev->input_panic ? "(input)" : "", dev->output_panic ? "(output)" : ""); dev->warned = 1; } } -static void fill_out_urb(struct snd_usb_caiaqdev *dev, - struct urb *urb, +static void fill_out_urb(struct snd_usb_caiaqdev *dev, + struct urb *urb, const struct usb_iso_packet_descriptor *iso) { unsigned char *usb_buf = urb->transfer_buffer + iso->offset; struct snd_pcm_substream *sub; int stream, i; - + for (i = 0; i < iso->length;) { for (stream = 0; stream < dev->n_streams; stream++, i++) { sub = dev->sub_playback[stream]; @@ -444,7 +444,7 @@ static void fill_out_urb(struct snd_usb_caiaqdev *dev, /* fill in the check bytes */ if (dev->spec.data_alignment == 2 && - i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == + i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == (dev->n_streams * CHANNELS_PER_STREAM)) for (stream = 0; stream < dev->n_streams; stream++, i++) usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i); @@ -453,7 +453,7 @@ static void fill_out_urb(struct snd_usb_caiaqdev *dev, static void read_completed(struct urb *urb) { - struct snd_usb_caiaq_cb_info *info = urb->context; + struct snd_usb_caiaq_cb_info *info = urb->context; struct snd_usb_caiaqdev *dev; struct urb *out; int frame, len, send_it = 0, outframe = 0; @@ -478,7 +478,7 @@ static void read_completed(struct urb *urb) out->iso_frame_desc[outframe].length = len; out->iso_frame_desc[outframe].actual_length = 0; out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame; - + if (len > 0) { spin_lock(&dev->spinlock); fill_out_urb(dev, out, &out->iso_frame_desc[outframe]); @@ -497,14 +497,14 @@ static void read_completed(struct urb *urb) out->transfer_flags = URB_ISO_ASAP; usb_submit_urb(out, GFP_ATOMIC); } - + /* re-submit inbound urb */ for (frame = 0; frame < FRAMES_PER_URB; frame++) { urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame; urb->iso_frame_desc[frame].length = BYTES_PER_FRAME; urb->iso_frame_desc[frame].actual_length = 0; } - + urb->number_of_packets = FRAMES_PER_URB; urb->transfer_flags = URB_ISO_ASAP; usb_submit_urb(urb, GFP_ATOMIC); @@ -528,7 +528,7 @@ static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret) struct usb_device *usb_dev = dev->chip.dev; unsigned int pipe; - pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ? + pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ? usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) : usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE); @@ -547,25 +547,25 @@ static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret) return urbs; } - urbs[i]->transfer_buffer = + urbs[i]->transfer_buffer = kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL); if (!urbs[i]->transfer_buffer) { log("unable to kmalloc() transfer buffer, OOM!?\n"); *ret = -ENOMEM; return urbs; } - + for (frame = 0; frame < FRAMES_PER_URB; frame++) { - struct usb_iso_packet_descriptor *iso = + struct usb_iso_packet_descriptor *iso = &urbs[i]->iso_frame_desc[frame]; - + iso->offset = BYTES_PER_FRAME * frame; iso->length = BYTES_PER_FRAME; } - + urbs[i]->dev = usb_dev; urbs[i]->pipe = pipe; - urbs[i]->transfer_buffer_length = FRAMES_PER_URB + urbs[i]->transfer_buffer_length = FRAMES_PER_URB * BYTES_PER_FRAME; urbs[i]->context = &dev->data_cb_info[i]; urbs[i]->interval = 1; @@ -589,7 +589,7 @@ static void free_urbs(struct urb **urbs) for (i = 0; i < N_URBS; i++) { if (!urbs[i]) continue; - + usb_kill_urb(urbs[i]); kfree(urbs[i]->transfer_buffer); usb_free_urb(urbs[i]); @@ -602,11 +602,11 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) { int i, ret; - dev->n_audio_in = max(dev->spec.num_analog_audio_in, - dev->spec.num_digital_audio_in) / + dev->n_audio_in = max(dev->spec.num_analog_audio_in, + dev->spec.num_digital_audio_in) / CHANNELS_PER_STREAM; dev->n_audio_out = max(dev->spec.num_analog_audio_out, - dev->spec.num_digital_audio_out) / + dev->spec.num_digital_audio_out) / CHANNELS_PER_STREAM; dev->n_streams = max(dev->n_audio_in, dev->n_audio_out); @@ -619,7 +619,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) return -EINVAL; } - ret = snd_pcm_new(dev->chip.card, dev->product_name, 0, + ret = snd_pcm_new(dev->chip.card, dev->product_name, 0, dev->n_audio_out, dev->n_audio_in, &dev->pcm); if (ret < 0) { @@ -632,7 +632,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) memset(dev->sub_playback, 0, sizeof(dev->sub_playback)); memset(dev->sub_capture, 0, sizeof(dev->sub_capture)); - + memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware, sizeof(snd_usb_caiaq_pcm_hardware)); @@ -651,9 +651,9 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) break; } - snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, + snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_usb_caiaq_ops); - snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, + snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_usb_caiaq_ops); snd_pcm_lib_preallocate_pages_for_all(dev->pcm, @@ -662,7 +662,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) MAX_BUFFER_SIZE, MAX_BUFFER_SIZE); dev->data_cb_info = - kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS, + kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS, GFP_KERNEL); if (!dev->data_cb_info) @@ -672,14 +672,14 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) dev->data_cb_info[i].dev = dev; dev->data_cb_info[i].index = i; } - + dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret); if (ret < 0) { kfree(dev->data_cb_info); free_urbs(dev->data_urbs_in); return ret; } - + dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret); if (ret < 0) { kfree(dev->data_cb_info); diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index 515de1c..2240624 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -35,7 +35,7 @@ #include "input.h" MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.16"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," @@ -79,7 +79,7 @@ static struct usb_device_id snd_usb_id_table[] = { { .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_RIGKONTROL2 + .idProduct = USB_PID_RIGKONTROL2 }, { .match_flags = USB_DEVICE_ID_MATCH_DEVICE, @@ -197,7 +197,7 @@ int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev, if (buffer && len > 0) memcpy(dev->ep1_out_buf+1, buffer, len); - + dev->ep1_out_buf[0] = command; return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1), dev->ep1_out_buf, len+1, &actual_len, 200); @@ -208,7 +208,7 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, { int ret; char tmp[5]; - + switch (rate) { case 44100: tmp[0] = SAMPLERATE_44100; break; case 48000: tmp[0] = SAMPLERATE_48000; break; @@ -237,12 +237,12 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, if (ret) return ret; - - if (!wait_event_timeout(dev->ep1_wait_queue, + + if (!wait_event_timeout(dev->ep1_wait_queue, dev->audio_parm_answer >= 0, HZ)) return -EPIPE; - - if (dev->audio_parm_answer != 1) + + if (dev->audio_parm_answer != 1) debug("unable to set the device's audio params\n"); else dev->bpp = bpp; @@ -250,8 +250,8 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, return dev->audio_parm_answer == 1 ? 0 : -EINVAL; } -int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, - int digital, int analog, int erp) +int snd_usb_caiaq_set_auto_msg(struct snd_usb_caiaqdev *dev, + int digital, int analog, int erp) { char tmp[3] = { digital, analog, erp }; return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG, @@ -262,7 +262,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev) { int ret; char val[4]; - + /* device-specific startup specials */ switch (dev->chip.usb_id) { case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): @@ -314,7 +314,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev) dev->control_state, 1); break; } - + if (dev->spec.num_analog_audio_out + dev->spec.num_analog_audio_in + dev->spec.num_digital_audio_out + @@ -323,7 +323,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev) if (ret < 0) log("Unable to set up audio system (ret=%d)\n", ret); } - + if (dev->spec.num_midi_in + dev->spec.num_midi_out > 0) { ret = snd_usb_caiaq_midi_init(dev); @@ -363,7 +363,7 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp) if (devnum >= SNDRV_CARDS) return -ENODEV; - err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, + err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, sizeof(struct snd_usb_caiaqdev), &card); if (err < 0) return err; @@ -382,11 +382,11 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp) static int __devinit init_card(struct snd_usb_caiaqdev *dev) { - char *c; + char *c, usbpath[32]; struct usb_device *usb_dev = dev->chip.dev; struct snd_card *card = dev->chip.card; int err, len; - + if (usb_set_interface(usb_dev, 0, 1) != 0) { log("can't set alt interface.\n"); return -EIO; @@ -395,19 +395,19 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev) usb_init_urb(&dev->ep1_in_urb); usb_init_urb(&dev->midi_out_urb); - usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev, + usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev, usb_rcvbulkpipe(usb_dev, 0x1), - dev->ep1_in_buf, EP1_BUFSIZE, + dev->ep1_in_buf, EP1_BUFSIZE, usb_ep1_command_reply_dispatch, dev); - usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev, + usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev, usb_sndbulkpipe(usb_dev, 0x1), - dev->midi_out_buf, EP1_BUFSIZE, + dev->midi_out_buf, EP1_BUFSIZE, snd_usb_caiaq_midi_output_done, dev); - + init_waitqueue_head(&dev->ep1_wait_queue); init_waitqueue_head(&dev->prepare_wait_queue); - + if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0) return -EIO; @@ -420,47 +420,52 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev) usb_string(usb_dev, usb_dev->descriptor.iManufacturer, dev->vendor_name, CAIAQ_USB_STR_LEN); - + usb_string(usb_dev, usb_dev->descriptor.iProduct, dev->product_name, CAIAQ_USB_STR_LEN); - - usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, - dev->serial, CAIAQ_USB_STR_LEN); - - /* terminate serial string at first white space occurence */ - c = strchr(dev->serial, ' '); - if (c) - *c = '\0'; - - strcpy(card->driver, MODNAME); - strcpy(card->shortname, dev->product_name); - - len = snprintf(card->longname, sizeof(card->longname), - "%s %s (serial %s, ", - dev->vendor_name, dev->product_name, dev->serial); - - if (len < sizeof(card->longname) - 2) - len += usb_make_path(usb_dev, card->longname + len, - sizeof(card->longname) - len); - - card->longname[len++] = ')'; - card->longname[len] = '\0'; + + strlcpy(card->driver, MODNAME, sizeof(card->driver)); + strlcpy(card->shortname, dev->product_name, sizeof(card->shortname)); + strlcpy(card->mixername, dev->product_name, sizeof(card->mixername)); + + /* if the id was not passed as module option, fill it with a shortened + * version of the product string which does not contain any + * whitespaces */ + + if (*card->id == '\0') { + char id[sizeof(card->id)]; + + memset(id, 0, sizeof(id)); + + for (c = card->shortname, len = 0; + *c && len < sizeof(card->id); c++) + if (*c != ' ') + id[len++] = *c; + + snd_card_set_id(card, id); + } + + usb_make_path(usb_dev, usbpath, sizeof(usbpath)); + snprintf(card->longname, sizeof(card->longname), + "%s %s (%s)", + dev->vendor_name, dev->product_name, usbpath); + setup_card(dev); return 0; } -static int __devinit snd_probe(struct usb_interface *intf, +static int __devinit snd_probe(struct usb_interface *intf, const struct usb_device_id *id) { int ret; struct snd_card *card; struct usb_device *device = interface_to_usbdev(intf); - + ret = create_card(device, &card); - + if (ret < 0) return ret; - + usb_set_intfdata(intf, card); ret = init_card(caiaqdev(card)); if (ret < 0) { @@ -468,7 +473,7 @@ static int __devinit snd_probe(struct usb_interface *intf, snd_card_free(card); return ret; } - + return 0; } @@ -489,10 +494,10 @@ static void snd_disconnect(struct usb_interface *intf) snd_usb_caiaq_input_free(dev); #endif snd_usb_caiaq_audio_free(dev); - + usb_kill_urb(&dev->ep1_in_urb); usb_kill_urb(&dev->midi_out_urb); - + snd_card_free(card); usb_reset_device(interface_to_usbdev(intf)); } diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h index 4cce1ad..ece7351 100644 --- a/sound/usb/caiaq/device.h +++ b/sound/usb/caiaq/device.h @@ -81,7 +81,6 @@ struct snd_usb_caiaqdev { char vendor_name[CAIAQ_USB_STR_LEN]; char product_name[CAIAQ_USB_STR_LEN]; - char serial[CAIAQ_USB_STR_LEN]; int n_streams, n_audio_in, n_audio_out; int streaming, first_packet, output_running; diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c index 8fa8cd8..538e8c0 100644 --- a/sound/usb/caiaq/midi.c +++ b/sound/usb/caiaq/midi.c @@ -40,7 +40,7 @@ static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *subst if (!dev) return; - + dev->midi_receive_substream = up ? substream : NULL; } @@ -64,18 +64,18 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev, struct snd_rawmidi_substream *substream) { int len, ret; - + dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE; dev->midi_out_buf[1] = 0; /* port */ len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3, EP1_BUFSIZE - 3); - + if (len <= 0) return; - + dev->midi_out_buf[2] = len; dev->midi_out_urb.transfer_buffer_length = len+3; - + ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC); if (ret < 0) log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed," @@ -88,7 +88,7 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev, static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up) { struct snd_usb_caiaqdev *dev = substream->rmidi->private_data; - + if (up) { dev->midi_out_substream = substream; if (!dev->midi_out_active) @@ -113,12 +113,12 @@ static struct snd_rawmidi_ops snd_usb_caiaq_midi_input = .trigger = snd_usb_caiaq_midi_input_trigger, }; -void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, +void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len) { if (!dev->midi_receive_substream) return; - + snd_rawmidi_receive(dev->midi_receive_substream, buf, len); } @@ -142,16 +142,16 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device) if (device->spec.num_midi_out > 0) { rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT; - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &snd_usb_caiaq_midi_output); } if (device->spec.num_midi_in > 0) { rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT; - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &snd_usb_caiaq_midi_input); } - + device->rmidi = rmidi; return 0; @@ -160,7 +160,7 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device) void snd_usb_caiaq_midi_output_done(struct urb* urb) { struct snd_usb_caiaqdev *dev = urb->context; - + dev->midi_out_active = 0; if (urb->status != 0) return; diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index a6b8848..c7b9023 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -627,6 +627,7 @@ static int prepare_playback_urb(struct snd_usb_substream *subs, subs->hwptr_done += offs; if (subs->hwptr_done >= runtime->buffer_size) subs->hwptr_done -= runtime->buffer_size; + runtime->delay += offs; spin_unlock_irqrestore(&subs->lock, flags); urb->transfer_buffer_length = offs * stride; if (period_elapsed) @@ -636,12 +637,22 @@ static int prepare_playback_urb(struct snd_usb_substream *subs, /* * process after playback data complete - * - nothing to do + * - decrease the delay count again */ static int retire_playback_urb(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *urb) { + unsigned long flags; + int stride = runtime->frame_bits >> 3; + int processed = urb->transfer_buffer_length / stride; + + spin_lock_irqsave(&subs->lock, flags); + if (processed > runtime->delay) + runtime->delay = 0; + else + runtime->delay -= processed; + spin_unlock_irqrestore(&subs->lock, flags); return 0; } @@ -1520,6 +1531,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) subs->hwptr_done = 0; subs->transfer_done = 0; subs->phase = 0; + runtime->delay = 0; /* clear urbs (to be sure) */ deactivate_urbs(subs, 0, 1); @@ -3279,6 +3291,25 @@ static int snd_usb_cm106_boot_quirk(struct usb_device *dev) return snd_usb_cm106_write_int_reg(dev, 2, 0x8004); } +/* + * C-Media CM6206 is based on CM106 with two additional + * registers that are not documented in the data sheet. + * Values here are chosen based on sniffing USB traffic + * under Windows. + */ +static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) +{ + int err, reg; + int val[] = {0x200c, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; + + for (reg = 0; reg < ARRAY_SIZE(val); reg++) { + err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]); + if (err < 0) + return err; + } + + return err; +} /* * Setup quirks @@ -3565,6 +3596,12 @@ static void *snd_usb_audio_probe(struct usb_device *dev, goto __err_val; } + /* C-Media CM6206 / CM106-Like Sound Device */ + if (id == USB_ID(0x0d8c, 0x0102)) { + if (snd_usb_cm6206_boot_quirk(dev) < 0) + goto __err_val; + } + /* * found a config. now register to ALSA */ diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index ecb58e7..4bd3a7a 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -423,7 +423,7 @@ static int set_ctl_value(struct usb_mixer_elem_info *cval, int request, int vali value_set = convert_bytes_value(cval, value_set); buf[0] = value_set & 0xff; buf[1] = (value_set >> 8) & 0xff; - while (timeout -- > 0) + while (timeout-- > 0) if (snd_usb_ctl_msg(cval->mixer->chip->dev, usb_sndctrlpipe(cval->mixer->chip->dev, 0), request, diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 5d955aa..f0f7624 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -1470,6 +1470,41 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { + /* Edirol M-16DX */ + /* FIXME: This quirk gives a good-working capture stream but the + * playback seems problematic because of lacking of sync + * with capture stream. It needs to sync with the capture + * clock. As now, you'll get frequent sound distortions + * via the playback. + */ + USB_DEVICE(0x0582, 0x00c4), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, +{ /* BOSS GT-10 */ USB_DEVICE(0x0582, 0x00da), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { @@ -1951,6 +1986,14 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { + USB_DEVICE(0x0ccd, 0x0028), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "TerraTec", + .product_name = "Aureon 5.1 MkII", + .ifnum = QUIRK_NO_INTERFACE + } +}, +{ USB_DEVICE(0x0ccd, 0x0035), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { .vendor_name = "Miditech", diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore new file mode 100644 index 0000000..d69a759 --- /dev/null +++ b/tools/perf/.gitignore @@ -0,0 +1,16 @@ +PERF-BUILD-OPTIONS +PERF-CFLAGS +PERF-GUI-VARS +PERF-VERSION-FILE +perf +perf-help +perf-record +perf-report +perf-stat +perf-top +perf*.1 +perf*.xml +common-cmds.h +tags +TAGS +cscope* diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile new file mode 100644 index 0000000..5457192 --- /dev/null +++ b/tools/perf/Documentation/Makefile @@ -0,0 +1,300 @@ +MAN1_TXT= \ + $(filter-out $(addsuffix .txt, $(ARTICLES) $(SP_ARTICLES)), \ + $(wildcard perf-*.txt)) \ + perf.txt +MAN5_TXT= +MAN7_TXT= + +MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT) +MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) +MAN_HTML=$(patsubst %.txt,%.html,$(MAN_TXT)) + +DOC_HTML=$(MAN_HTML) + +ARTICLES = +# with their own formatting rules. +SP_ARTICLES = +API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technical/api-index.txt, $(wildcard technical/api-*.txt))) +SP_ARTICLES += $(API_DOCS) +SP_ARTICLES += technical/api-index + +DOC_HTML += $(patsubst %,%.html,$(ARTICLES) $(SP_ARTICLES)) + +DOC_MAN1=$(patsubst %.txt,%.1,$(MAN1_TXT)) +DOC_MAN5=$(patsubst %.txt,%.5,$(MAN5_TXT)) +DOC_MAN7=$(patsubst %.txt,%.7,$(MAN7_TXT)) + +prefix?=$(HOME) +bindir?=$(prefix)/bin +htmldir?=$(prefix)/share/doc/perf-doc +pdfdir?=$(prefix)/share/doc/perf-doc +mandir?=$(prefix)/share/man +man1dir=$(mandir)/man1 +man5dir=$(mandir)/man5 +man7dir=$(mandir)/man7 +# DESTDIR= + +ASCIIDOC=asciidoc +ASCIIDOC_EXTRA = +MANPAGE_XSL = manpage-normal.xsl +XMLTO_EXTRA = +INSTALL?=install +RM ?= rm -f +DOC_REF = origin/man +HTML_REF = origin/html + +infodir?=$(prefix)/share/info +MAKEINFO=makeinfo +INSTALL_INFO=install-info +DOCBOOK2X_TEXI=docbook2x-texi +DBLATEX=dblatex +ifndef PERL_PATH + PERL_PATH = /usr/bin/perl +endif + +-include ../config.mak.autogen +-include ../config.mak + +# +# For asciidoc ... +# -7.1.2, no extra settings are needed. +# 8.0-, set ASCIIDOC8. +# + +# +# For docbook-xsl ... +# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0) +# 1.69.0, no extra settings are needed? +# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP? +# 1.71.1, no extra settings are needed? +# 1.72.0, set DOCBOOK_XSL_172. +# 1.73.0-, set ASCIIDOC_NO_ROFF +# + +# +# If you had been using DOCBOOK_XSL_172 in an attempt to get rid +# of 'the ".ft C" problem' in your generated manpages, and you +# instead ended up with weird characters around callouts, try +# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8). +# + +ifdef ASCIIDOC8 +ASCIIDOC_EXTRA += -a asciidoc7compatible +endif +ifdef DOCBOOK_XSL_172 +ASCIIDOC_EXTRA += -a perf-asciidoc-no-roff +MANPAGE_XSL = manpage-1.72.xsl +else + ifdef ASCIIDOC_NO_ROFF + # docbook-xsl after 1.72 needs the regular XSL, but will not + # pass-thru raw roff codes from asciidoc.conf, so turn them off. + ASCIIDOC_EXTRA += -a perf-asciidoc-no-roff + endif +endif +ifdef MAN_BOLD_LITERAL +XMLTO_EXTRA += -m manpage-bold-literal.xsl +endif +ifdef DOCBOOK_SUPPRESS_SP +XMLTO_EXTRA += -m manpage-suppress-sp.xsl +endif + +SHELL_PATH ?= $(SHELL) +# Shell quote; +SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) + +# +# Please note that there is a minor bug in asciidoc. +# The version after 6.0.3 _will_ include the patch found here: +# http://marc.theaimsgroup.com/?l=perf&m=111558757202243&w=2 +# +# Until that version is released you may have to apply the patch +# yourself - yes, all 6 characters of it! +# + +QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir +QUIET_SUBDIR1 = + +ifneq ($(findstring $(MAKEFLAGS),w),w) +PRINT_DIR = --no-print-directory +else # "make -w" +NO_SUBDIR = : +endif + +ifneq ($(findstring $(MAKEFLAGS),s),s) +ifndef V + QUIET_ASCIIDOC = @echo ' ' ASCIIDOC $@; + QUIET_XMLTO = @echo ' ' XMLTO $@; + QUIET_DB2TEXI = @echo ' ' DB2TEXI $@; + QUIET_MAKEINFO = @echo ' ' MAKEINFO $@; + QUIET_DBLATEX = @echo ' ' DBLATEX $@; + QUIET_XSLTPROC = @echo ' ' XSLTPROC $@; + QUIET_GEN = @echo ' ' GEN $@; + QUIET_STDERR = 2> /dev/null + QUIET_SUBDIR0 = +@subdir= + QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ + $(MAKE) $(PRINT_DIR) -C $$subdir + export V +endif +endif + +all: html man + +html: $(DOC_HTML) + +$(DOC_HTML) $(DOC_MAN1) $(DOC_MAN5) $(DOC_MAN7): asciidoc.conf + +man: man1 man5 man7 +man1: $(DOC_MAN1) +man5: $(DOC_MAN5) +man7: $(DOC_MAN7) + +info: perf.info perfman.info + +pdf: user-manual.pdf + +install: install-man + +install-man: man + $(INSTALL) -d -m 755 $(DESTDIR)$(man1dir) +# $(INSTALL) -d -m 755 $(DESTDIR)$(man5dir) +# $(INSTALL) -d -m 755 $(DESTDIR)$(man7dir) + $(INSTALL) -m 644 $(DOC_MAN1) $(DESTDIR)$(man1dir) +# $(INSTALL) -m 644 $(DOC_MAN5) $(DESTDIR)$(man5dir) +# $(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir) + +install-info: info + $(INSTALL) -d -m 755 $(DESTDIR)$(infodir) + $(INSTALL) -m 644 perf.info perfman.info $(DESTDIR)$(infodir) + if test -r $(DESTDIR)$(infodir)/dir; then \ + $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perf.info ;\ + $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perfman.info ;\ + else \ + echo "No directory found in $(DESTDIR)$(infodir)" >&2 ; \ + fi + +install-pdf: pdf + $(INSTALL) -d -m 755 $(DESTDIR)$(pdfdir) + $(INSTALL) -m 644 user-manual.pdf $(DESTDIR)$(pdfdir) + +install-html: html + '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir) + +../PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE + $(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) PERF-VERSION-FILE + +-include ../PERF-VERSION-FILE + +# +# Determine "include::" file references in asciidoc files. +# +doc.dep : $(wildcard *.txt) build-docdep.perl + $(QUIET_GEN)$(RM) $@+ $@ && \ + $(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \ + mv $@+ $@ + +-include doc.dep + +cmds_txt = cmds-ancillaryinterrogators.txt \ + cmds-ancillarymanipulators.txt \ + cmds-mainporcelain.txt \ + cmds-plumbinginterrogators.txt \ + cmds-plumbingmanipulators.txt \ + cmds-synchingrepositories.txt \ + cmds-synchelpers.txt \ + cmds-purehelpers.txt \ + cmds-foreignscminterface.txt + +$(cmds_txt): cmd-list.made + +cmd-list.made: cmd-list.perl ../command-list.txt $(MAN1_TXT) + $(QUIET_GEN)$(RM) $@ && \ + $(PERL_PATH) ./cmd-list.perl ../command-list.txt $(QUIET_STDERR) && \ + date >$@ + +clean: + $(RM) *.xml *.xml+ *.html *.html+ *.1 *.5 *.7 + $(RM) *.texi *.texi+ *.texi++ perf.info perfman.info + $(RM) howto-index.txt howto/*.html doc.dep + $(RM) technical/api-*.html technical/api-index.txt + $(RM) $(cmds_txt) *.made + +$(MAN_HTML): %.html : %.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) -b xhtml11 -d manpage -f asciidoc.conf \ + $(ASCIIDOC_EXTRA) -aperf_version=$(PERF_VERSION) -o $@+ $< && \ + mv $@+ $@ + +%.1 %.5 %.7 : %.xml + $(QUIET_XMLTO)$(RM) $@ && \ + xmlto -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $< + +%.xml : %.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) -b docbook -d manpage -f asciidoc.conf \ + $(ASCIIDOC_EXTRA) -aperf_version=$(PERF_VERSION) -o $@+ $< && \ + mv $@+ $@ + +XSLT = docbook.xsl +XSLTOPTS = --xinclude --stringparam html.stylesheet docbook-xsl.css + +user-manual.html: user-manual.xml + $(QUIET_XSLTPROC)xsltproc $(XSLTOPTS) -o $@ $(XSLT) $< + +perf.info: user-manual.texi + $(QUIET_MAKEINFO)$(MAKEINFO) --no-split -o $@ user-manual.texi + +user-manual.texi: user-manual.xml + $(QUIET_DB2TEXI)$(RM) $@+ $@ && \ + $(DOCBOOK2X_TEXI) user-manual.xml --encoding=UTF-8 --to-stdout >$@++ && \ + $(PERL_PATH) fix-texi.perl <$@++ >$@+ && \ + rm $@++ && \ + mv $@+ $@ + +user-manual.pdf: user-manual.xml + $(QUIET_DBLATEX)$(RM) $@+ $@ && \ + $(DBLATEX) -o $@+ -p /etc/asciidoc/dblatex/asciidoc-dblatex.xsl -s /etc/asciidoc/dblatex/asciidoc-dblatex.sty $< && \ + mv $@+ $@ + +perfman.texi: $(MAN_XML) cat-texi.perl + $(QUIET_DB2TEXI)$(RM) $@+ $@ && \ + ($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --encoding=UTF-8 \ + --to-stdout $(xml) &&) true) > $@++ && \ + $(PERL_PATH) cat-texi.perl $@ <$@++ >$@+ && \ + rm $@++ && \ + mv $@+ $@ + +perfman.info: perfman.texi + $(QUIET_MAKEINFO)$(MAKEINFO) --no-split --no-validate $*.texi + +$(patsubst %.txt,%.texi,$(MAN_TXT)): %.texi : %.xml + $(QUIET_DB2TEXI)$(RM) $@+ $@ && \ + $(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ && \ + mv $@+ $@ + +howto-index.txt: howto-index.sh $(wildcard howto/*.txt) + $(QUIET_GEN)$(RM) $@+ $@ && \ + '$(SHELL_PATH_SQ)' ./howto-index.sh $(wildcard howto/*.txt) >$@+ && \ + mv $@+ $@ + +$(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt + $(QUIET_ASCIIDOC)$(ASCIIDOC) -b xhtml11 $*.txt + +WEBDOC_DEST = /pub/software/tools/perf/docs + +$(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b xhtml11 - >$@+ && \ + mv $@+ $@ + +install-webdoc : html + '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(WEBDOC_DEST) + +quick-install: quick-install-man + +quick-install-man: + '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir) + +quick-install-html: + '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir) + +.PHONY: .FORCE-PERF-VERSION-FILE diff --git a/tools/perf/Documentation/asciidoc.conf b/tools/perf/Documentation/asciidoc.conf new file mode 100644 index 0000000..356b23a --- /dev/null +++ b/tools/perf/Documentation/asciidoc.conf @@ -0,0 +1,91 @@ +## linkperf: macro +# +# Usage: linkperf:command[manpage-section] +# +# Note, {0} is the manpage section, while {target} is the command. +# +# Show PERF link as: (
); if section is defined, else just show +# the command. + +[macros] +(?su)[\\]?(?Plinkperf):(?P\S*?)\[(?P.*?)\]= + +[attributes] +asterisk=* +plus=+ +caret=^ +startsb=[ +endsb=] +tilde=~ + +ifdef::backend-docbook[] +[linkperf-inlinemacro] +{0%{target}} +{0#} +{0#{target}{0}} +{0#} +endif::backend-docbook[] + +ifdef::backend-docbook[] +ifndef::perf-asciidoc-no-roff[] +# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. +# v1.72 breaks with this because it replaces dots not in roff requests. +[listingblock] +{title} + +ifdef::doctype-manpage[] + .ft C +endif::doctype-manpage[] +| +ifdef::doctype-manpage[] + .ft +endif::doctype-manpage[] + +{title#} +endif::perf-asciidoc-no-roff[] + +ifdef::perf-asciidoc-no-roff[] +ifdef::doctype-manpage[] +# The following two small workarounds insert a simple paragraph after screen +[listingblock] +{title} + +| + +{title#} + +[verseblock] +{title} +{title%} +{title#} +| + +{title#} +{title%} +endif::doctype-manpage[] +endif::perf-asciidoc-no-roff[] +endif::backend-docbook[] + +ifdef::doctype-manpage[] +ifdef::backend-docbook[] +[header] +template::[header-declarations] + + +{mantitle} +{manvolnum} +perf +{perf_version} +perf Manual + + + {manname} + {manpurpose} + +endif::backend-docbook[] +endif::doctype-manpage[] + +ifdef::backend-xhtml11[] +[linkperf-inlinemacro] +{target}{0?({0})} +endif::backend-xhtml11[] diff --git a/tools/perf/Documentation/manpage-1.72.xsl b/tools/perf/Documentation/manpage-1.72.xsl new file mode 100644 index 0000000..b4d315c --- /dev/null +++ b/tools/perf/Documentation/manpage-1.72.xsl @@ -0,0 +1,14 @@ + + + + + + +▓ +⌂ + + diff --git a/tools/perf/Documentation/manpage-base.xsl b/tools/perf/Documentation/manpage-base.xsl new file mode 100644 index 0000000..a264fa6 --- /dev/null +++ b/tools/perf/Documentation/manpage-base.xsl @@ -0,0 +1,35 @@ + + + + + + + + + + + + + + sp + + + + + + + + br + + + diff --git a/tools/perf/Documentation/manpage-bold-literal.xsl b/tools/perf/Documentation/manpage-bold-literal.xsl new file mode 100644 index 0000000..608eb5d --- /dev/null +++ b/tools/perf/Documentation/manpage-bold-literal.xsl @@ -0,0 +1,17 @@ + + + + + + + fB + + + fR + + + diff --git a/tools/perf/Documentation/manpage-normal.xsl b/tools/perf/Documentation/manpage-normal.xsl new file mode 100644 index 0000000..a48f5b1 --- /dev/null +++ b/tools/perf/Documentation/manpage-normal.xsl @@ -0,0 +1,13 @@ + + + + + + +\ +. + + diff --git a/tools/perf/Documentation/manpage-suppress-sp.xsl b/tools/perf/Documentation/manpage-suppress-sp.xsl new file mode 100644 index 0000000..a63c763 --- /dev/null +++ b/tools/perf/Documentation/manpage-suppress-sp.xsl @@ -0,0 +1,21 @@ + + + + + + + + + + + + + + + diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt new file mode 100644 index 0000000..c9dcade --- /dev/null +++ b/tools/perf/Documentation/perf-annotate.txt @@ -0,0 +1,29 @@ +perf-annotate(1) +============== + +NAME +---- +perf-annotate - Read perf.data (created by perf record) and display annotated code + +SYNOPSIS +-------- +[verse] +'perf annotate' [-i | --input=file] symbol_name + +DESCRIPTION +----------- +This command reads the input file and displays an annotated version of the +code. If the object file has debug symbols then the source code will be +displayed alongside assembly code. + +If there is no debug info in the object, then annotated assembly is displayed. + +OPTIONS +------- +-i:: +--input=:: + Input file name. (default: perf.data) + +SEE ALSO +-------- +linkperf:perf-record[1] diff --git a/tools/perf/Documentation/perf-help.txt b/tools/perf/Documentation/perf-help.txt new file mode 100644 index 0000000..5143918 --- /dev/null +++ b/tools/perf/Documentation/perf-help.txt @@ -0,0 +1,38 @@ +perf-help(1) +============ + +NAME +---- +perf-help - display help information about perf + +SYNOPSIS +-------- +'perf help' [-a|--all] [COMMAND] + +DESCRIPTION +----------- + +With no options and no COMMAND given, the synopsis of the 'perf' +command and a list of the most commonly used perf commands are printed +on the standard output. + +If the option '--all' or '-a' is given, then all available commands are +printed on the standard output. + +If a perf command is named, a manual page for that command is brought +up. The 'man' program is used by default for this purpose, but this +can be overridden by other options or configuration variables. + +Note that `perf --help ...` is identical to `perf help ...` because the +former is internally converted into the latter. + +OPTIONS +------- +-a:: +--all:: + Prints all the available commands on the standard output. This + option supersedes any other option. + +PERF +---- +Part of the linkperf:perf[1] suite diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt new file mode 100644 index 0000000..8290b94 --- /dev/null +++ b/tools/perf/Documentation/perf-list.txt @@ -0,0 +1,25 @@ +perf-list(1) +============ + +NAME +---- +perf-list - List all symbolic event types + +SYNOPSIS +-------- +[verse] +'perf list' + +DESCRIPTION +----------- +This command displays the symbolic event types which can be selected in the +various perf commands with the -e option. + +OPTIONS +------- +None + +SEE ALSO +-------- +linkperf:perf-stat[1], linkperf:perf-top[1], +linkperf:perf-record[1] diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt new file mode 100644 index 0000000..1dbc1ee --- /dev/null +++ b/tools/perf/Documentation/perf-record.txt @@ -0,0 +1,42 @@ +perf-record(1) +============== + +NAME +---- +perf-record - Run a command and record its profile into perf.data + +SYNOPSIS +-------- +[verse] +'perf record' [-e | --event=EVENT] [-l] [-a] +'perf record' [-e | --event=EVENT] [-l] [-a] -- [] + +DESCRIPTION +----------- +This command runs a command and gathers a performance counter profile +from it, into perf.data - without displaying anything. + +This file can then be inspected later on, using 'perf report'. + + +OPTIONS +------- +...:: + Any command you can specify in a shell. + +-e:: +--event=:: + Select the PMU event. Selection can be a symbolic event name + (use 'perf list' to list all events) or a raw PMU + event (eventsel+umask) in the form of rNNN where NNN is a + hexadecimal event descriptor. + +-a:: + system-wide collection + +-l:: + scale counter values + +SEE ALSO +-------- +linkperf:perf-stat[1], linkperf:perf-list[1] diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt new file mode 100644 index 0000000..52d3fc6 --- /dev/null +++ b/tools/perf/Documentation/perf-report.txt @@ -0,0 +1,26 @@ +perf-report(1) +============== + +NAME +---- +perf-report - Read perf.data (created by perf record) and display the profile + +SYNOPSIS +-------- +[verse] +'perf report' [-i | --input=file] + +DESCRIPTION +----------- +This command displays the performance counter profile information recorded +via perf report. + +OPTIONS +------- +-i:: +--input=:: + Input file name. (default: perf.data) + +SEE ALSO +-------- +linkperf:perf-stat[1] diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt new file mode 100644 index 0000000..c368a72 --- /dev/null +++ b/tools/perf/Documentation/perf-stat.txt @@ -0,0 +1,66 @@ +perf-stat(1) +============ + +NAME +---- +perf-stat - Run a command and gather performance counter statistics + +SYNOPSIS +-------- +[verse] +'perf stat' [-e | --event=EVENT] [-l] [-a] +'perf stat' [-e | --event=EVENT] [-l] [-a] -- [] + +DESCRIPTION +----------- +This command runs a command and gathers performance counter statistics +from it. + + +OPTIONS +------- +...:: + Any command you can specify in a shell. + + +-e:: +--event=:: + Select the PMU event. Selection can be a symbolic event name + (use 'perf list' to list all events) or a raw PMU + event (eventsel+umask) in the form of rNNN where NNN is a + hexadecimal event descriptor. + +-i:: +--inherit:: + child tasks inherit counters +-p:: +--pid=:: + stat events on existing pid + +-a:: + system-wide collection + +-l:: + scale counter values + +EXAMPLES +-------- + +$ perf stat -- make -j + + Performance counter stats for 'make -j': + + 8117.370256 task clock ticks # 11.281 CPU utilization factor + 678 context switches # 0.000 M/sec + 133 CPU migrations # 0.000 M/sec + 235724 pagefaults # 0.029 M/sec + 24821162526 CPU cycles # 3057.784 M/sec + 18687303457 instructions # 2302.138 M/sec + 172158895 cache references # 21.209 M/sec + 27075259 cache misses # 3.335 M/sec + + Wall-clock time elapsed: 719.554352 msecs + +SEE ALSO +-------- +linkperf:perf-top[1], linkperf:perf-list[1] diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt new file mode 100644 index 0000000..539d012 --- /dev/null +++ b/tools/perf/Documentation/perf-top.txt @@ -0,0 +1,39 @@ +perf-top(1) +=========== + +NAME +---- +perf-top - Run a command and profile it + +SYNOPSIS +-------- +[verse] +'perf top' [-e | --event=EVENT] [-l] [-a] + +DESCRIPTION +----------- +This command runs a command and gathers a performance counter profile +from it. + + +OPTIONS +------- +...:: + Any command you can specify in a shell. + +-e:: +--event=:: + Select the PMU event. Selection can be a symbolic event name + (use 'perf list' to list all events) or a raw PMU + event (eventsel+umask) in the form of rNNN where NNN is a + hexadecimal event descriptor. + +-a:: + system-wide collection + +-l:: + scale counter values + +SEE ALSO +-------- +linkperf:perf-stat[1], linkperf:perf-list[1] diff --git a/tools/perf/Documentation/perf.txt b/tools/perf/Documentation/perf.txt new file mode 100644 index 0000000..69c8325 --- /dev/null +++ b/tools/perf/Documentation/perf.txt @@ -0,0 +1,24 @@ +perf(1) +======= + +NAME +---- +perf - Performance analysis tools for Linux + +SYNOPSIS +-------- +[verse] +'perf' [--version] [--help] COMMAND [ARGS] + +DESCRIPTION +----------- +Performance counters for Linux are are a new kernel-based subsystem +that provide a framework for all things performance analysis. It +covers hardware level (CPU/PMU, Performance Monitoring Unit) features +and software features (software counters, tracepoints) as well. + +SEE ALSO +-------- +linkperf:perf-stat[1], linkperf:perf-top[1], +linkperf:perf-record[1], linkperf:perf-report[1], +linkperf:perf-list[1] diff --git a/tools/perf/Makefile b/tools/perf/Makefile new file mode 100644 index 0000000..0cbd5d6 --- /dev/null +++ b/tools/perf/Makefile @@ -0,0 +1,929 @@ +# The default target of this Makefile is... +all:: + +# Define V=1 to have a more verbose compile. +# +# Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf() +# or vsnprintf() return -1 instead of number of characters which would +# have been written to the final string if enough space had been available. +# +# Define FREAD_READS_DIRECTORIES if your are on a system which succeeds +# when attempting to read from an fopen'ed directory. +# +# Define NO_OPENSSL environment variable if you do not have OpenSSL. +# This also implies MOZILLA_SHA1. +# +# Define CURLDIR=/foo/bar if your curl header and library files are in +# /foo/bar/include and /foo/bar/lib directories. +# +# Define EXPATDIR=/foo/bar if your expat header and library files are in +# /foo/bar/include and /foo/bar/lib directories. +# +# Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent. +# +# Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks +# d_type in struct dirent (latest Cygwin -- will be fixed soonish). +# +# Define NO_C99_FORMAT if your formatted IO functions (printf/scanf et.al.) +# do not support the 'size specifiers' introduced by C99, namely ll, hh, +# j, z, t. (representing long long int, char, intmax_t, size_t, ptrdiff_t). +# some C compilers supported these specifiers prior to C99 as an extension. +# +# Define NO_STRCASESTR if you don't have strcasestr. +# +# Define NO_MEMMEM if you don't have memmem. +# +# Define NO_STRTOUMAX if you don't have strtoumax in the C library. +# If your compiler also does not support long long or does not have +# strtoull, define NO_STRTOULL. +# +# Define NO_SETENV if you don't have setenv in the C library. +# +# Define NO_UNSETENV if you don't have unsetenv in the C library. +# +# Define NO_MKDTEMP if you don't have mkdtemp in the C library. +# +# Define NO_SYS_SELECT_H if you don't have sys/select.h. +# +# Define NO_SYMLINK_HEAD if you never want .perf/HEAD to be a symbolic link. +# Enable it on Windows. By default, symrefs are still used. +# +# Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability +# tests. These tests take up a significant amount of the total test time +# but are not needed unless you plan to talk to SVN repos. +# +# Define NO_FINK if you are building on Darwin/Mac OS X, have Fink +# installed in /sw, but don't want PERF to link against any libraries +# installed there. If defined you may specify your own (or Fink's) +# include directories and library directories by defining CFLAGS +# and LDFLAGS appropriately. +# +# Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X, +# have DarwinPorts installed in /opt/local, but don't want PERF to +# link against any libraries installed there. If defined you may +# specify your own (or DarwinPort's) include directories and +# library directories by defining CFLAGS and LDFLAGS appropriately. +# +# Define PPC_SHA1 environment variable when running make to make use of +# a bundled SHA1 routine optimized for PowerPC. +# +# Define ARM_SHA1 environment variable when running make to make use of +# a bundled SHA1 routine optimized for ARM. +# +# Define MOZILLA_SHA1 environment variable when running make to make use of +# a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast +# on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default +# choice) has very fast version optimized for i586. +# +# Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin). +# +# Define NEEDS_LIBICONV if linking with libc is not enough (Darwin). +# +# Define NEEDS_SOCKET if linking with libc is not enough (SunOS, +# Patrick Mauritz). +# +# Define NO_MMAP if you want to avoid mmap. +# +# Define NO_PTHREADS if you do not have or do not want to use Pthreads. +# +# Define NO_PREAD if you have a problem with pread() system call (e.g. +# cygwin.dll before v1.5.22). +# +# Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is +# generally faster on your platform than accessing the working directory. +# +# Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support +# the executable mode bit, but doesn't really do so. +# +# Define NO_IPV6 if you lack IPv6 support and getaddrinfo(). +# +# Define NO_SOCKADDR_STORAGE if your platform does not have struct +# sockaddr_storage. +# +# Define NO_ICONV if your libc does not properly support iconv. +# +# Define OLD_ICONV if your library has an old iconv(), where the second +# (input buffer pointer) parameter is declared with type (const char **). +# +# Define NO_DEFLATE_BOUND if your zlib does not have deflateBound. +# +# Define NO_R_TO_GCC_LINKER if your gcc does not like "-R/path/lib" +# that tells runtime paths to dynamic libraries; +# "-Wl,-rpath=/path/lib" is used instead. +# +# Define USE_NSEC below if you want perf to care about sub-second file mtimes +# and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and +# it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely +# randomly break unless your underlying filesystem supports those sub-second +# times (my ext3 doesn't). +# +# Define USE_ST_TIMESPEC if your "struct stat" uses "st_ctimespec" instead of +# "st_ctim" +# +# Define NO_NSEC if your "struct stat" does not have "st_ctim.tv_nsec" +# available. This automatically turns USE_NSEC off. +# +# Define USE_STDEV below if you want perf to care about the underlying device +# change being considered an inode change from the update-index perspective. +# +# Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks +# field that counts the on-disk footprint in 512-byte blocks. +# +# Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8 +# +# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72. +# +# Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's +# MakeMaker (e.g. using ActiveState under Cygwin). +# +# Define NO_PERL if you do not want Perl scripts or libraries at all. +# +# Define INTERNAL_QSORT to use Git's implementation of qsort(), which +# is a simplified version of the merge sort used in glibc. This is +# recommended if Git triggers O(n^2) behavior in your platform's qsort(). +# +# Define NO_EXTERNAL_GREP if you don't want "perf grep" to ever call +# your external grep (e.g., if your system lacks grep, if its grep is +# broken, or spawning external process is slower than built-in grep perf has). + +PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE + @$(SHELL_PATH) util/PERF-VERSION-GEN +-include PERF-VERSION-FILE + +uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not') +uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not') +uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not') +uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not') +uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not') +uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not') + +# CFLAGS and LDFLAGS are for the users to override from the command line. + +CFLAGS = -ggdb3 -Wall -Werror -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -O6 +LDFLAGS = -lpthread -lrt -lelf +ALL_CFLAGS = $(CFLAGS) +ALL_LDFLAGS = $(LDFLAGS) +STRIP ?= strip + +# Among the variables below, these: +# perfexecdir +# template_dir +# mandir +# infodir +# htmldir +# ETC_PERFCONFIG (but not sysconfdir) +# can be specified as a relative path some/where/else; +# this is interpreted as relative to $(prefix) and "perf" at +# runtime figures out where they are based on the path to the executable. +# This can help installing the suite in a relocatable way. + +prefix = $(HOME) +bindir_relative = bin +bindir = $(prefix)/$(bindir_relative) +mandir = share/man +infodir = share/info +perfexecdir = libexec/perf-core +sharedir = $(prefix)/share +template_dir = share/perf-core/templates +htmldir = share/doc/perf-doc +ifeq ($(prefix),/usr) +sysconfdir = /etc +ETC_PERFCONFIG = $(sysconfdir)/perfconfig +else +sysconfdir = $(prefix)/etc +ETC_PERFCONFIG = etc/perfconfig +endif +lib = lib +# DESTDIR= + +export prefix bindir sharedir sysconfdir + +CC = gcc +AR = ar +RM = rm -f +TAR = tar +FIND = find +INSTALL = install +RPMBUILD = rpmbuild +PTHREAD_LIBS = -lpthread + +# sparse is architecture-neutral, which means that we need to tell it +# explicitly what architecture to check for. Fix this up for yours.. +SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__ + + + +### --- END CONFIGURATION SECTION --- + +# Those must not be GNU-specific; they are shared with perl/ which may +# be built by a different compiler. (Note that this is an artifact now +# but it still might be nice to keep that distinction.) +BASIC_CFLAGS = +BASIC_LDFLAGS = + +# Guard against environment variables +BUILTIN_OBJS = +BUILT_INS = +COMPAT_CFLAGS = +COMPAT_OBJS = +LIB_H = +LIB_OBJS = +SCRIPT_PERL = +SCRIPT_SH = +TEST_PROGRAMS = + +# +# No scripts right now: +# + +# SCRIPT_SH += perf-am.sh + +# +# No Perl scripts right now: +# + +# SCRIPT_PERL += perf-add--interactive.perl + +SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \ + $(patsubst %.perl,%,$(SCRIPT_PERL)) + +# Empty... +EXTRA_PROGRAMS = + +# ... and all the rest that could be moved out of bindir to perfexecdir +PROGRAMS += $(EXTRA_PROGRAMS) + +# +# Single 'perf' binary right now: +# +PROGRAMS += perf + +# List built-in command $C whose implementation cmd_$C() is not in +# builtin-$C.o but is linked in as part of some other command. +# +# None right now: +# +# BUILT_INS += perf-init $X + +# what 'all' will build and 'install' will install, in perfexecdir +ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS) + +# what 'all' will build but not install in perfexecdir +OTHER_PROGRAMS = perf$X + +# Set paths to tools early so that they can be used for version tests. +ifndef SHELL_PATH + SHELL_PATH = /bin/sh +endif +ifndef PERL_PATH + PERL_PATH = /usr/bin/perl +endif + +export PERL_PATH + +LIB_FILE=libperf.a + +LIB_H += ../../include/linux/perf_counter.h +LIB_H += perf.h +LIB_H += util/list.h +LIB_H += util/rbtree.h +LIB_H += util/levenshtein.h +LIB_H += util/parse-options.h +LIB_H += util/parse-events.h +LIB_H += util/quote.h +LIB_H += util/util.h +LIB_H += util/help.h +LIB_H += util/strbuf.h +LIB_H += util/string.h +LIB_H += util/run-command.h +LIB_H += util/sigchain.h +LIB_H += util/symbol.h +LIB_H += util/color.h + +LIB_OBJS += util/abspath.o +LIB_OBJS += util/alias.o +LIB_OBJS += util/config.o +LIB_OBJS += util/ctype.o +LIB_OBJS += util/environment.o +LIB_OBJS += util/exec_cmd.o +LIB_OBJS += util/help.o +LIB_OBJS += util/levenshtein.o +LIB_OBJS += util/parse-options.o +LIB_OBJS += util/parse-events.o +LIB_OBJS += util/path.o +LIB_OBJS += util/rbtree.o +LIB_OBJS += util/run-command.o +LIB_OBJS += util/quote.o +LIB_OBJS += util/strbuf.o +LIB_OBJS += util/string.o +LIB_OBJS += util/usage.o +LIB_OBJS += util/wrapper.o +LIB_OBJS += util/sigchain.o +LIB_OBJS += util/symbol.o +LIB_OBJS += util/color.o +LIB_OBJS += util/pager.o + +BUILTIN_OBJS += builtin-annotate.o +BUILTIN_OBJS += builtin-help.o +BUILTIN_OBJS += builtin-list.o +BUILTIN_OBJS += builtin-record.o +BUILTIN_OBJS += builtin-report.o +BUILTIN_OBJS += builtin-stat.o +BUILTIN_OBJS += builtin-top.o + +PERFLIBS = $(LIB_FILE) +EXTLIBS = + +# +# Platform specific tweaks +# + +# We choose to avoid "if .. else if .. else .. endif endif" +# because maintaining the nesting to match is a pain. If +# we had "elif" things would have been much nicer... + +-include config.mak.autogen +-include config.mak + +ifeq ($(uname_S),Darwin) + ifndef NO_FINK + ifeq ($(shell test -d /sw/lib && echo y),y) + BASIC_CFLAGS += -I/sw/include + BASIC_LDFLAGS += -L/sw/lib + endif + endif + ifndef NO_DARWIN_PORTS + ifeq ($(shell test -d /opt/local/lib && echo y),y) + BASIC_CFLAGS += -I/opt/local/include + BASIC_LDFLAGS += -L/opt/local/lib + endif + endif + PTHREAD_LIBS = +endif + +ifndef CC_LD_DYNPATH + ifdef NO_R_TO_GCC_LINKER + # Some gcc does not accept and pass -R to the linker to specify + # the runtime dynamic library path. + CC_LD_DYNPATH = -Wl,-rpath, + else + CC_LD_DYNPATH = -R + endif +endif + +ifdef ZLIB_PATH + BASIC_CFLAGS += -I$(ZLIB_PATH)/include + EXTLIBS += -L$(ZLIB_PATH)/$(lib) $(CC_LD_DYNPATH)$(ZLIB_PATH)/$(lib) +endif +EXTLIBS += -lz + +ifdef NEEDS_SOCKET + EXTLIBS += -lsocket +endif +ifdef NEEDS_NSL + EXTLIBS += -lnsl +endif +ifdef NO_D_TYPE_IN_DIRENT + BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT +endif +ifdef NO_D_INO_IN_DIRENT + BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT +endif +ifdef NO_ST_BLOCKS_IN_STRUCT_STAT + BASIC_CFLAGS += -DNO_ST_BLOCKS_IN_STRUCT_STAT +endif +ifdef USE_NSEC + BASIC_CFLAGS += -DUSE_NSEC +endif +ifdef USE_ST_TIMESPEC + BASIC_CFLAGS += -DUSE_ST_TIMESPEC +endif +ifdef NO_NSEC + BASIC_CFLAGS += -DNO_NSEC +endif +ifdef NO_C99_FORMAT + BASIC_CFLAGS += -DNO_C99_FORMAT +endif +ifdef SNPRINTF_RETURNS_BOGUS + COMPAT_CFLAGS += -DSNPRINTF_RETURNS_BOGUS + COMPAT_OBJS += compat/snprintf.o +endif +ifdef FREAD_READS_DIRECTORIES + COMPAT_CFLAGS += -DFREAD_READS_DIRECTORIES + COMPAT_OBJS += compat/fopen.o +endif +ifdef NO_SYMLINK_HEAD + BASIC_CFLAGS += -DNO_SYMLINK_HEAD +endif +ifdef NO_STRCASESTR + COMPAT_CFLAGS += -DNO_STRCASESTR + COMPAT_OBJS += compat/strcasestr.o +endif +ifdef NO_STRTOUMAX + COMPAT_CFLAGS += -DNO_STRTOUMAX + COMPAT_OBJS += compat/strtoumax.o +endif +ifdef NO_STRTOULL + COMPAT_CFLAGS += -DNO_STRTOULL +endif +ifdef NO_SETENV + COMPAT_CFLAGS += -DNO_SETENV + COMPAT_OBJS += compat/setenv.o +endif +ifdef NO_MKDTEMP + COMPAT_CFLAGS += -DNO_MKDTEMP + COMPAT_OBJS += compat/mkdtemp.o +endif +ifdef NO_UNSETENV + COMPAT_CFLAGS += -DNO_UNSETENV + COMPAT_OBJS += compat/unsetenv.o +endif +ifdef NO_SYS_SELECT_H + BASIC_CFLAGS += -DNO_SYS_SELECT_H +endif +ifdef NO_MMAP + COMPAT_CFLAGS += -DNO_MMAP + COMPAT_OBJS += compat/mmap.o +else + ifdef USE_WIN32_MMAP + COMPAT_CFLAGS += -DUSE_WIN32_MMAP + COMPAT_OBJS += compat/win32mmap.o + endif +endif +ifdef NO_PREAD + COMPAT_CFLAGS += -DNO_PREAD + COMPAT_OBJS += compat/pread.o +endif +ifdef NO_FAST_WORKING_DIRECTORY + BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY +endif +ifdef NO_TRUSTABLE_FILEMODE + BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE +endif +ifdef NO_IPV6 + BASIC_CFLAGS += -DNO_IPV6 +endif +ifdef NO_UINTMAX_T + BASIC_CFLAGS += -Duintmax_t=uint32_t +endif +ifdef NO_SOCKADDR_STORAGE +ifdef NO_IPV6 + BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in +else + BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6 +endif +endif +ifdef NO_INET_NTOP + LIB_OBJS += compat/inet_ntop.o +endif +ifdef NO_INET_PTON + LIB_OBJS += compat/inet_pton.o +endif + +ifdef NO_ICONV + BASIC_CFLAGS += -DNO_ICONV +endif + +ifdef OLD_ICONV + BASIC_CFLAGS += -DOLD_ICONV +endif + +ifdef NO_DEFLATE_BOUND + BASIC_CFLAGS += -DNO_DEFLATE_BOUND +endif + +ifdef PPC_SHA1 + SHA1_HEADER = "ppc/sha1.h" + LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o +else +ifdef ARM_SHA1 + SHA1_HEADER = "arm/sha1.h" + LIB_OBJS += arm/sha1.o arm/sha1_arm.o +else +ifdef MOZILLA_SHA1 + SHA1_HEADER = "mozilla-sha1/sha1.h" + LIB_OBJS += mozilla-sha1/sha1.o +else + SHA1_HEADER = + EXTLIBS += $(LIB_4_CRYPTO) +endif +endif +endif +ifdef NO_PERL_MAKEMAKER + export NO_PERL_MAKEMAKER +endif +ifdef NO_HSTRERROR + COMPAT_CFLAGS += -DNO_HSTRERROR + COMPAT_OBJS += compat/hstrerror.o +endif +ifdef NO_MEMMEM + COMPAT_CFLAGS += -DNO_MEMMEM + COMPAT_OBJS += compat/memmem.o +endif +ifdef INTERNAL_QSORT + COMPAT_CFLAGS += -DINTERNAL_QSORT + COMPAT_OBJS += compat/qsort.o +endif +ifdef RUNTIME_PREFIX + COMPAT_CFLAGS += -DRUNTIME_PREFIX +endif + +ifdef DIR_HAS_BSD_GROUP_SEMANTICS + COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS +endif +ifdef NO_EXTERNAL_GREP + BASIC_CFLAGS += -DNO_EXTERNAL_GREP +endif + +ifeq ($(PERL_PATH),) +NO_PERL=NoThanks +endif + +QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir +QUIET_SUBDIR1 = + +ifneq ($(findstring $(MAKEFLAGS),w),w) +PRINT_DIR = --no-print-directory +else # "make -w" +NO_SUBDIR = : +endif + +ifneq ($(findstring $(MAKEFLAGS),s),s) +ifndef V + QUIET_CC = @echo ' ' CC $@; + QUIET_AR = @echo ' ' AR $@; + QUIET_LINK = @echo ' ' LINK $@; + QUIET_BUILT_IN = @echo ' ' BUILTIN $@; + QUIET_GEN = @echo ' ' GEN $@; + QUIET_SUBDIR0 = +@subdir= + QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ + $(MAKE) $(PRINT_DIR) -C $$subdir + export V + export QUIET_GEN + export QUIET_BUILT_IN +endif +endif + +ifdef ASCIIDOC8 + export ASCIIDOC8 +endif + +# Shell quote (do not use $(call) to accommodate ancient setups); + +SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER)) +ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG)) + +DESTDIR_SQ = $(subst ','\'',$(DESTDIR)) +bindir_SQ = $(subst ','\'',$(bindir)) +bindir_relative_SQ = $(subst ','\'',$(bindir_relative)) +mandir_SQ = $(subst ','\'',$(mandir)) +infodir_SQ = $(subst ','\'',$(infodir)) +perfexecdir_SQ = $(subst ','\'',$(perfexecdir)) +template_dir_SQ = $(subst ','\'',$(template_dir)) +htmldir_SQ = $(subst ','\'',$(htmldir)) +prefix_SQ = $(subst ','\'',$(prefix)) + +SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) +PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH)) + +LIBS = $(PERFLIBS) $(EXTLIBS) + +BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \ + $(COMPAT_CFLAGS) +LIB_OBJS += $(COMPAT_OBJS) + +ALL_CFLAGS += $(BASIC_CFLAGS) +ALL_LDFLAGS += $(BASIC_LDFLAGS) + +export TAR INSTALL DESTDIR SHELL_PATH + + +### Build rules + +SHELL = $(SHELL_PATH) + +all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS +ifneq (,$X) + $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';) +endif + +all:: + +please_set_SHELL_PATH_to_a_more_modern_shell: + @$$(:) + +shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell + +strip: $(PROGRAMS) perf$X + $(STRIP) $(STRIP_OPTS) $(PROGRAMS) perf$X + +perf.o: perf.c common-cmds.h PERF-CFLAGS + $(QUIET_CC)$(CC) -DPERF_VERSION='"$(PERF_VERSION)"' \ + '-DPERF_HTML_PATH="$(htmldir_SQ)"' \ + $(ALL_CFLAGS) -c $(filter %.c,$^) + +perf$X: perf.o $(BUILTIN_OBJS) $(PERFLIBS) + $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ perf.o \ + $(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS) + +builtin-help.o: builtin-help.c common-cmds.h PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) \ + '-DPERF_HTML_PATH="$(htmldir_SQ)"' \ + '-DPERF_MAN_PATH="$(mandir_SQ)"' \ + '-DPERF_INFO_PATH="$(infodir_SQ)"' $< + +$(BUILT_INS): perf$X + $(QUIET_BUILT_IN)$(RM) $@ && \ + ln perf$X $@ 2>/dev/null || \ + ln -s perf$X $@ 2>/dev/null || \ + cp perf$X $@ + +common-cmds.h: util/generate-cmdlist.sh command-list.txt + +common-cmds.h: $(wildcard Documentation/perf-*.txt) + $(QUIET_GEN)util/generate-cmdlist.sh > $@+ && mv $@+ $@ + +$(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh + $(QUIET_GEN)$(RM) $@ $@+ && \ + sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \ + -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \ + -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \ + -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \ + -e 's/@@NO_CURL@@/$(NO_CURL)/g' \ + $@.sh >$@+ && \ + chmod +x $@+ && \ + mv $@+ $@ + +configure: configure.ac + $(QUIET_GEN)$(RM) $@ $<+ && \ + sed -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \ + $< > $<+ && \ + autoconf -o $@ $<+ && \ + $(RM) $<+ + +# These can record PERF_VERSION +perf.o perf.spec \ + $(patsubst %.sh,%,$(SCRIPT_SH)) \ + $(patsubst %.perl,%,$(SCRIPT_PERL)) \ + : PERF-VERSION-FILE + +%.o: %.c PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) $< +%.s: %.c PERF-CFLAGS + $(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $< +%.o: %.S + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) $< + +util/exec_cmd.o: util/exec_cmd.c PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) \ + '-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \ + '-DBINDIR="$(bindir_relative_SQ)"' \ + '-DPREFIX="$(prefix_SQ)"' \ + $< + +builtin-init-db.o: builtin-init-db.c PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DDEFAULT_PERF_TEMPLATE_DIR='"$(template_dir_SQ)"' $< + +util/config.o: util/config.c PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $< + +perf-%$X: %.o $(PERFLIBS) + $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS) + +$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H) +$(patsubst perf-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h) +builtin-revert.o wt-status.o: wt-status.h + +$(LIB_FILE): $(LIB_OBJS) + $(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS) + +doc: + $(MAKE) -C Documentation all + +man: + $(MAKE) -C Documentation man + +html: + $(MAKE) -C Documentation html + +info: + $(MAKE) -C Documentation info + +pdf: + $(MAKE) -C Documentation pdf + +TAGS: + $(RM) TAGS + $(FIND) . -name '*.[hcS]' -print | xargs etags -a + +tags: + $(RM) tags + $(FIND) . -name '*.[hcS]' -print | xargs ctags -a + +cscope: + $(RM) cscope* + $(FIND) . -name '*.[hcS]' -print | xargs cscope -b + +### Detect prefix changes +TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\ + $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ) + +PERF-CFLAGS: .FORCE-PERF-CFLAGS + @FLAGS='$(TRACK_CFLAGS)'; \ + if test x"$$FLAGS" != x"`cat PERF-CFLAGS 2>/dev/null`" ; then \ + echo 1>&2 " * new build flags or prefix"; \ + echo "$$FLAGS" >PERF-CFLAGS; \ + fi + +# We need to apply sq twice, once to protect from the shell +# that runs PERF-BUILD-OPTIONS, and then again to protect it +# and the first level quoting from the shell that runs "echo". +PERF-BUILD-OPTIONS: .FORCE-PERF-BUILD-OPTIONS + @echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@ + @echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@ + @echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@ + @echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@ + +### Testing rules + +# +# None right now: +# +# TEST_PROGRAMS += test-something$X + +all:: $(TEST_PROGRAMS) + +# GNU make supports exporting all variables by "export" without parameters. +# However, the environment gets quite big, and some programs have problems +# with that. + +export NO_SVN_TESTS + +check: common-cmds.h + if sparse; \ + then \ + for i in *.c */*.c; \ + do \ + sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; \ + done; \ + else \ + echo 2>&1 "Did you mean 'make test'?"; \ + exit 1; \ + fi + +remove-dashes: + ./fixup-builtins $(BUILT_INS) $(PROGRAMS) $(SCRIPTS) + +### Installation rules + +ifneq ($(filter /%,$(firstword $(template_dir))),) +template_instdir = $(template_dir) +else +template_instdir = $(prefix)/$(template_dir) +endif +export template_instdir + +ifneq ($(filter /%,$(firstword $(perfexecdir))),) +perfexec_instdir = $(perfexecdir) +else +perfexec_instdir = $(prefix)/$(perfexecdir) +endif +perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir)) +export perfexec_instdir + +install: all + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)' + $(INSTALL) perf$X '$(DESTDIR_SQ)$(bindir_SQ)' +ifdef BUILT_INS + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' + $(INSTALL) $(BUILT_INS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' +ifneq (,$X) + $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), $(RM) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/$p';) +endif +endif + +install-doc: + $(MAKE) -C Documentation install + +install-man: + $(MAKE) -C Documentation install-man + +install-html: + $(MAKE) -C Documentation install-html + +install-info: + $(MAKE) -C Documentation install-info + +install-pdf: + $(MAKE) -C Documentation install-pdf + +quick-install-doc: + $(MAKE) -C Documentation quick-install + +quick-install-man: + $(MAKE) -C Documentation quick-install-man + +quick-install-html: + $(MAKE) -C Documentation quick-install-html + + +### Maintainer's dist rules +# +# None right now +# +# +# perf.spec: perf.spec.in +# sed -e 's/@@VERSION@@/$(PERF_VERSION)/g' < $< > $@+ +# mv $@+ $@ +# +# PERF_TARNAME=perf-$(PERF_VERSION) +# dist: perf.spec perf-archive$(X) configure +# ./perf-archive --format=tar \ +# --prefix=$(PERF_TARNAME)/ HEAD^{tree} > $(PERF_TARNAME).tar +# @mkdir -p $(PERF_TARNAME) +# @cp perf.spec configure $(PERF_TARNAME) +# @echo $(PERF_VERSION) > $(PERF_TARNAME)/version +# $(TAR) rf $(PERF_TARNAME).tar \ +# $(PERF_TARNAME)/perf.spec \ +# $(PERF_TARNAME)/configure \ +# $(PERF_TARNAME)/version +# @$(RM) -r $(PERF_TARNAME) +# gzip -f -9 $(PERF_TARNAME).tar +# +# htmldocs = perf-htmldocs-$(PERF_VERSION) +# manpages = perf-manpages-$(PERF_VERSION) +# dist-doc: +# $(RM) -r .doc-tmp-dir +# mkdir .doc-tmp-dir +# $(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc +# cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar . +# gzip -n -9 -f $(htmldocs).tar +# : +# $(RM) -r .doc-tmp-dir +# mkdir -p .doc-tmp-dir/man1 .doc-tmp-dir/man5 .doc-tmp-dir/man7 +# $(MAKE) -C Documentation DESTDIR=./ \ +# man1dir=../.doc-tmp-dir/man1 \ +# man5dir=../.doc-tmp-dir/man5 \ +# man7dir=../.doc-tmp-dir/man7 \ +# install +# cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar . +# gzip -n -9 -f $(manpages).tar +# $(RM) -r .doc-tmp-dir +# +# rpm: dist +# $(RPMBUILD) -ta $(PERF_TARNAME).tar.gz + +### Cleaning rules + +distclean: clean +# $(RM) configure + +clean: + $(RM) *.o */*.o $(LIB_FILE) + $(RM) $(ALL_PROGRAMS) $(BUILT_INS) perf$X + $(RM) $(TEST_PROGRAMS) + $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope* + $(RM) -r autom4te.cache + $(RM) config.log config.mak.autogen config.mak.append config.status config.cache + $(RM) -r $(PERF_TARNAME) .doc-tmp-dir + $(RM) $(PERF_TARNAME).tar.gz perf-core_$(PERF_VERSION)-*.tar.gz + $(RM) $(htmldocs).tar.gz $(manpages).tar.gz + $(MAKE) -C Documentation/ clean + $(RM) PERF-VERSION-FILE PERF-CFLAGS PERF-BUILD-OPTIONS + +.PHONY: all install clean strip +.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell +.PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS +.PHONY: .FORCE-PERF-BUILD-OPTIONS + +### Make sure built-ins do not have dups and listed in perf.c +# +check-builtins:: + ./check-builtins.sh + +### Test suite coverage testing +# +# None right now +# +# .PHONY: coverage coverage-clean coverage-build coverage-report +# +# coverage: +# $(MAKE) coverage-build +# $(MAKE) coverage-report +# +# coverage-clean: +# rm -f *.gcda *.gcno +# +# COVERAGE_CFLAGS = $(CFLAGS) -O0 -ftest-coverage -fprofile-arcs +# COVERAGE_LDFLAGS = $(CFLAGS) -O0 -lgcov +# +# coverage-build: coverage-clean +# $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" all +# $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" \ +# -j1 test +# +# coverage-report: +# gcov -b *.c */*.c +# grep '^function.*called 0 ' *.c.gcov */*.c.gcov \ +# | sed -e 's/\([^:]*\)\.gcov: *function \([^ ]*\) called.*/\1: \2/' \ +# | tee coverage-untested-functions diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c new file mode 100644 index 0000000..b1ed5f7 --- /dev/null +++ b/tools/perf/builtin-annotate.c @@ -0,0 +1,1356 @@ +/* + * builtin-annotate.c + * + * Builtin annotate command: Analyze the perf.data input file, + * look up and read DSOs and symbol information and display + * a histogram of results, along various sorting keys. + */ +#include "builtin.h" + +#include "util/util.h" + +#include "util/color.h" +#include "util/list.h" +#include "util/cache.h" +#include "util/rbtree.h" +#include "util/symbol.h" +#include "util/string.h" + +#include "perf.h" + +#include "util/parse-options.h" +#include "util/parse-events.h" + +#define SHOW_KERNEL 1 +#define SHOW_USER 2 +#define SHOW_HV 4 + +static char const *input_name = "perf.data"; +static char *vmlinux = "vmlinux"; + +static char default_sort_order[] = "comm,symbol"; +static char *sort_order = default_sort_order; + +static int input; +static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV; + +static int dump_trace = 0; +#define dprintf(x...) do { if (dump_trace) printf(x); } while (0) + +static int verbose; + +static unsigned long page_size; +static unsigned long mmap_window = 32; + +struct ip_event { + struct perf_event_header header; + __u64 ip; + __u32 pid, tid; +}; + +struct mmap_event { + struct perf_event_header header; + __u32 pid, tid; + __u64 start; + __u64 len; + __u64 pgoff; + char filename[PATH_MAX]; +}; + +struct comm_event { + struct perf_event_header header; + __u32 pid, tid; + char comm[16]; +}; + +struct fork_event { + struct perf_event_header header; + __u32 pid, ppid; +}; + +struct period_event { + struct perf_event_header header; + __u64 time; + __u64 id; + __u64 sample_period; +}; + +typedef union event_union { + struct perf_event_header header; + struct ip_event ip; + struct mmap_event mmap; + struct comm_event comm; + struct fork_event fork; + struct period_event period; +} event_t; + +static LIST_HEAD(dsos); +static struct dso *kernel_dso; +static struct dso *vdso; + + +static void dsos__add(struct dso *dso) +{ + list_add_tail(&dso->node, &dsos); +} + +static struct dso *dsos__find(const char *name) +{ + struct dso *pos; + + list_for_each_entry(pos, &dsos, node) + if (strcmp(pos->name, name) == 0) + return pos; + return NULL; +} + +static struct dso *dsos__findnew(const char *name) +{ + struct dso *dso = dsos__find(name); + int nr; + + if (dso) + return dso; + + dso = dso__new(name, 0); + if (!dso) + goto out_delete_dso; + + nr = dso__load(dso, NULL, verbose); + if (nr < 0) { + if (verbose) + fprintf(stderr, "Failed to open: %s\n", name); + goto out_delete_dso; + } + if (!nr && verbose) { + fprintf(stderr, + "No symbols found in: %s, maybe install a debug package?\n", + name); + } + + dsos__add(dso); + + return dso; + +out_delete_dso: + dso__delete(dso); + return NULL; +} + +static void dsos__fprintf(FILE *fp) +{ + struct dso *pos; + + list_for_each_entry(pos, &dsos, node) + dso__fprintf(pos, fp); +} + +static struct symbol *vdso__find_symbol(struct dso *dso, __u64 ip) +{ + return dso__find_symbol(kernel_dso, ip); +} + +static int load_kernel(void) +{ + int err; + + kernel_dso = dso__new("[kernel]", 0); + if (!kernel_dso) + return -1; + + err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose); + if (err) { + dso__delete(kernel_dso); + kernel_dso = NULL; + } else + dsos__add(kernel_dso); + + vdso = dso__new("[vdso]", 0); + if (!vdso) + return -1; + + vdso->find_symbol = vdso__find_symbol; + + dsos__add(vdso); + + return err; +} + +struct map { + struct list_head node; + __u64 start; + __u64 end; + __u64 pgoff; + __u64 (*map_ip)(struct map *, __u64); + struct dso *dso; +}; + +static __u64 map__map_ip(struct map *map, __u64 ip) +{ + return ip - map->start + map->pgoff; +} + +static __u64 vdso__map_ip(struct map *map, __u64 ip) +{ + return ip; +} + +static struct map *map__new(struct mmap_event *event) +{ + struct map *self = malloc(sizeof(*self)); + + if (self != NULL) { + const char *filename = event->filename; + + self->start = event->start; + self->end = event->start + event->len; + self->pgoff = event->pgoff; + + self->dso = dsos__findnew(filename); + if (self->dso == NULL) + goto out_delete; + + if (self->dso == vdso) + self->map_ip = vdso__map_ip; + else + self->map_ip = map__map_ip; + } + return self; +out_delete: + free(self); + return NULL; +} + +static struct map *map__clone(struct map *self) +{ + struct map *map = malloc(sizeof(*self)); + + if (!map) + return NULL; + + memcpy(map, self, sizeof(*self)); + + return map; +} + +static int map__overlap(struct map *l, struct map *r) +{ + if (l->start > r->start) { + struct map *t = l; + l = r; + r = t; + } + + if (l->end > r->start) + return 1; + + return 0; +} + +static size_t map__fprintf(struct map *self, FILE *fp) +{ + return fprintf(fp, " %Lx-%Lx %Lx %s\n", + self->start, self->end, self->pgoff, self->dso->name); +} + + +struct thread { + struct rb_node rb_node; + struct list_head maps; + pid_t pid; + char *comm; +}; + +static struct thread *thread__new(pid_t pid) +{ + struct thread *self = malloc(sizeof(*self)); + + if (self != NULL) { + self->pid = pid; + self->comm = malloc(32); + if (self->comm) + snprintf(self->comm, 32, ":%d", self->pid); + INIT_LIST_HEAD(&self->maps); + } + + return self; +} + +static int thread__set_comm(struct thread *self, const char *comm) +{ + if (self->comm) + free(self->comm); + self->comm = strdup(comm); + return self->comm ? 0 : -ENOMEM; +} + +static size_t thread__fprintf(struct thread *self, FILE *fp) +{ + struct map *pos; + size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm); + + list_for_each_entry(pos, &self->maps, node) + ret += map__fprintf(pos, fp); + + return ret; +} + + +static struct rb_root threads; +static struct thread *last_match; + +static struct thread *threads__findnew(pid_t pid) +{ + struct rb_node **p = &threads.rb_node; + struct rb_node *parent = NULL; + struct thread *th; + + /* + * Font-end cache - PID lookups come in blocks, + * so most of the time we dont have to look up + * the full rbtree: + */ + if (last_match && last_match->pid == pid) + return last_match; + + while (*p != NULL) { + parent = *p; + th = rb_entry(parent, struct thread, rb_node); + + if (th->pid == pid) { + last_match = th; + return th; + } + + if (pid < th->pid) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + th = thread__new(pid); + if (th != NULL) { + rb_link_node(&th->rb_node, parent, p); + rb_insert_color(&th->rb_node, &threads); + last_match = th; + } + + return th; +} + +static void thread__insert_map(struct thread *self, struct map *map) +{ + struct map *pos, *tmp; + + list_for_each_entry_safe(pos, tmp, &self->maps, node) { + if (map__overlap(pos, map)) { + list_del_init(&pos->node); + /* XXX leaks dsos */ + free(pos); + } + } + + list_add_tail(&map->node, &self->maps); +} + +static int thread__fork(struct thread *self, struct thread *parent) +{ + struct map *map; + + if (self->comm) + free(self->comm); + self->comm = strdup(parent->comm); + if (!self->comm) + return -ENOMEM; + + list_for_each_entry(map, &parent->maps, node) { + struct map *new = map__clone(map); + if (!new) + return -ENOMEM; + thread__insert_map(self, new); + } + + return 0; +} + +static struct map *thread__find_map(struct thread *self, __u64 ip) +{ + struct map *pos; + + if (self == NULL) + return NULL; + + list_for_each_entry(pos, &self->maps, node) + if (ip >= pos->start && ip <= pos->end) + return pos; + + return NULL; +} + +static size_t threads__fprintf(FILE *fp) +{ + size_t ret = 0; + struct rb_node *nd; + + for (nd = rb_first(&threads); nd; nd = rb_next(nd)) { + struct thread *pos = rb_entry(nd, struct thread, rb_node); + + ret += thread__fprintf(pos, fp); + } + + return ret; +} + +/* + * histogram, sorted on item, collects counts + */ + +static struct rb_root hist; + +struct hist_entry { + struct rb_node rb_node; + + struct thread *thread; + struct map *map; + struct dso *dso; + struct symbol *sym; + __u64 ip; + char level; + + uint32_t count; +}; + +/* + * configurable sorting bits + */ + +struct sort_entry { + struct list_head list; + + char *header; + + int64_t (*cmp)(struct hist_entry *, struct hist_entry *); + int64_t (*collapse)(struct hist_entry *, struct hist_entry *); + size_t (*print)(FILE *fp, struct hist_entry *); +}; + +/* --sort pid */ + +static int64_t +sort__thread_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static size_t +sort__thread_print(FILE *fp, struct hist_entry *self) +{ + return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid); +} + +static struct sort_entry sort_thread = { + .header = " Command: Pid", + .cmp = sort__thread_cmp, + .print = sort__thread_print, +}; + +/* --sort comm */ + +static int64_t +sort__comm_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static int64_t +sort__comm_collapse(struct hist_entry *left, struct hist_entry *right) +{ + char *comm_l = left->thread->comm; + char *comm_r = right->thread->comm; + + if (!comm_l || !comm_r) { + if (!comm_l && !comm_r) + return 0; + else if (!comm_l) + return -1; + else + return 1; + } + + return strcmp(comm_l, comm_r); +} + +static size_t +sort__comm_print(FILE *fp, struct hist_entry *self) +{ + return fprintf(fp, "%16s", self->thread->comm); +} + +static struct sort_entry sort_comm = { + .header = " Command", + .cmp = sort__comm_cmp, + .collapse = sort__comm_collapse, + .print = sort__comm_print, +}; + +/* --sort dso */ + +static int64_t +sort__dso_cmp(struct hist_entry *left, struct hist_entry *right) +{ + struct dso *dso_l = left->dso; + struct dso *dso_r = right->dso; + + if (!dso_l || !dso_r) { + if (!dso_l && !dso_r) + return 0; + else if (!dso_l) + return -1; + else + return 1; + } + + return strcmp(dso_l->name, dso_r->name); +} + +static size_t +sort__dso_print(FILE *fp, struct hist_entry *self) +{ + if (self->dso) + return fprintf(fp, "%-25s", self->dso->name); + + return fprintf(fp, "%016llx ", (__u64)self->ip); +} + +static struct sort_entry sort_dso = { + .header = "Shared Object ", + .cmp = sort__dso_cmp, + .print = sort__dso_print, +}; + +/* --sort symbol */ + +static int64_t +sort__sym_cmp(struct hist_entry *left, struct hist_entry *right) +{ + __u64 ip_l, ip_r; + + if (left->sym == right->sym) + return 0; + + ip_l = left->sym ? left->sym->start : left->ip; + ip_r = right->sym ? right->sym->start : right->ip; + + return (int64_t)(ip_r - ip_l); +} + +static size_t +sort__sym_print(FILE *fp, struct hist_entry *self) +{ + size_t ret = 0; + + if (verbose) + ret += fprintf(fp, "%#018llx ", (__u64)self->ip); + + if (self->sym) { + ret += fprintf(fp, "[%c] %s", + self->dso == kernel_dso ? 'k' : '.', self->sym->name); + } else { + ret += fprintf(fp, "%#016llx", (__u64)self->ip); + } + + return ret; +} + +static struct sort_entry sort_sym = { + .header = "Symbol", + .cmp = sort__sym_cmp, + .print = sort__sym_print, +}; + +static int sort__need_collapse = 0; + +struct sort_dimension { + char *name; + struct sort_entry *entry; + int taken; +}; + +static struct sort_dimension sort_dimensions[] = { + { .name = "pid", .entry = &sort_thread, }, + { .name = "comm", .entry = &sort_comm, }, + { .name = "dso", .entry = &sort_dso, }, + { .name = "symbol", .entry = &sort_sym, }, +}; + +static LIST_HEAD(hist_entry__sort_list); + +static int sort_dimension__add(char *tok) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) { + struct sort_dimension *sd = &sort_dimensions[i]; + + if (sd->taken) + continue; + + if (strncasecmp(tok, sd->name, strlen(tok))) + continue; + + if (sd->entry->collapse) + sort__need_collapse = 1; + + list_add_tail(&sd->entry->list, &hist_entry__sort_list); + sd->taken = 1; + + return 0; + } + + return -ESRCH; +} + +static int64_t +hist_entry__cmp(struct hist_entry *left, struct hist_entry *right) +{ + struct sort_entry *se; + int64_t cmp = 0; + + list_for_each_entry(se, &hist_entry__sort_list, list) { + cmp = se->cmp(left, right); + if (cmp) + break; + } + + return cmp; +} + +static int64_t +hist_entry__collapse(struct hist_entry *left, struct hist_entry *right) +{ + struct sort_entry *se; + int64_t cmp = 0; + + list_for_each_entry(se, &hist_entry__sort_list, list) { + int64_t (*f)(struct hist_entry *, struct hist_entry *); + + f = se->collapse ?: se->cmp; + + cmp = f(left, right); + if (cmp) + break; + } + + return cmp; +} + +/* + * collect histogram counts + */ +static void hist_hit(struct hist_entry *he, __u64 ip) +{ + unsigned int sym_size, offset; + struct symbol *sym = he->sym; + + he->count++; + + if (!sym || !sym->hist) + return; + + sym_size = sym->end - sym->start; + offset = ip - sym->start; + + if (offset >= sym_size) + return; + + sym->hist_sum++; + sym->hist[offset]++; + + if (verbose >= 3) + printf("%p %s: count++ [ip: %p, %08Lx] => %Ld\n", + (void *)(unsigned long)he->sym->start, + he->sym->name, + (void *)(unsigned long)ip, ip - he->sym->start, + sym->hist[offset]); +} + +static int +hist_entry__add(struct thread *thread, struct map *map, struct dso *dso, + struct symbol *sym, __u64 ip, char level) +{ + struct rb_node **p = &hist.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *he; + struct hist_entry entry = { + .thread = thread, + .map = map, + .dso = dso, + .sym = sym, + .ip = ip, + .level = level, + .count = 1, + }; + int cmp; + + while (*p != NULL) { + parent = *p; + he = rb_entry(parent, struct hist_entry, rb_node); + + cmp = hist_entry__cmp(&entry, he); + + if (!cmp) { + hist_hit(he, ip); + + return 0; + } + + if (cmp < 0) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + he = malloc(sizeof(*he)); + if (!he) + return -ENOMEM; + *he = entry; + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &hist); + + return 0; +} + +static void hist_entry__free(struct hist_entry *he) +{ + free(he); +} + +/* + * collapse the histogram + */ + +static struct rb_root collapse_hists; + +static void collapse__insert_entry(struct hist_entry *he) +{ + struct rb_node **p = &collapse_hists.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *iter; + int64_t cmp; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct hist_entry, rb_node); + + cmp = hist_entry__collapse(iter, he); + + if (!cmp) { + iter->count += he->count; + hist_entry__free(he); + return; + } + + if (cmp < 0) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &collapse_hists); +} + +static void collapse__resort(void) +{ + struct rb_node *next; + struct hist_entry *n; + + if (!sort__need_collapse) + return; + + next = rb_first(&hist); + while (next) { + n = rb_entry(next, struct hist_entry, rb_node); + next = rb_next(&n->rb_node); + + rb_erase(&n->rb_node, &hist); + collapse__insert_entry(n); + } +} + +/* + * reverse the map, sort on count. + */ + +static struct rb_root output_hists; + +static void output__insert_entry(struct hist_entry *he) +{ + struct rb_node **p = &output_hists.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *iter; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct hist_entry, rb_node); + + if (he->count > iter->count) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &output_hists); +} + +static void output__resort(void) +{ + struct rb_node *next; + struct hist_entry *n; + struct rb_root *tree = &hist; + + if (sort__need_collapse) + tree = &collapse_hists; + + next = rb_first(tree); + + while (next) { + n = rb_entry(next, struct hist_entry, rb_node); + next = rb_next(&n->rb_node); + + rb_erase(&n->rb_node, tree); + output__insert_entry(n); + } +} + +static void register_idle_thread(void) +{ + struct thread *thread = threads__findnew(0); + + if (thread == NULL || + thread__set_comm(thread, "[idle]")) { + fprintf(stderr, "problem inserting idle task.\n"); + exit(-1); + } +} + +static unsigned long total = 0, + total_mmap = 0, + total_comm = 0, + total_fork = 0, + total_unknown = 0; + +static int +process_overflow_event(event_t *event, unsigned long offset, unsigned long head) +{ + char level; + int show = 0; + struct dso *dso = NULL; + struct thread *thread = threads__findnew(event->ip.pid); + __u64 ip = event->ip.ip; + struct map *map = NULL; + + dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->header.misc, + event->ip.pid, + (void *)(long)ip); + + dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid); + + if (thread == NULL) { + fprintf(stderr, "problem processing %d event, skipping it.\n", + event->header.type); + return -1; + } + + if (event->header.misc & PERF_EVENT_MISC_KERNEL) { + show = SHOW_KERNEL; + level = 'k'; + + dso = kernel_dso; + + dprintf(" ...... dso: %s\n", dso->name); + + } else if (event->header.misc & PERF_EVENT_MISC_USER) { + + show = SHOW_USER; + level = '.'; + + map = thread__find_map(thread, ip); + if (map != NULL) { + ip = map->map_ip(map, ip); + dso = map->dso; + } else { + /* + * If this is outside of all known maps, + * and is a negative address, try to look it + * up in the kernel dso, as it might be a + * vsyscall (which executes in user-mode): + */ + if ((long long)ip < 0) + dso = kernel_dso; + } + dprintf(" ...... dso: %s\n", dso ? dso->name : ""); + + } else { + show = SHOW_HV; + level = 'H'; + dprintf(" ...... dso: [hypervisor]\n"); + } + + if (show & show_mask) { + struct symbol *sym = NULL; + + if (dso) + sym = dso->find_symbol(dso, ip); + + if (hist_entry__add(thread, map, dso, sym, ip, level)) { + fprintf(stderr, + "problem incrementing symbol count, skipping event\n"); + return -1; + } + } + total++; + + return 0; +} + +static int +process_mmap_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->mmap.pid); + struct map *map = map__new(&event->mmap); + + dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->mmap.pid, + (void *)(long)event->mmap.start, + (void *)(long)event->mmap.len, + (void *)(long)event->mmap.pgoff, + event->mmap.filename); + + if (thread == NULL || map == NULL) { + dprintf("problem processing PERF_EVENT_MMAP, skipping event.\n"); + return 0; + } + + thread__insert_map(thread, map); + total_mmap++; + + return 0; +} + +static int +process_comm_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->comm.pid); + + dprintf("%p [%p]: PERF_EVENT_COMM: %s:%d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->comm.comm, event->comm.pid); + + if (thread == NULL || + thread__set_comm(thread, event->comm.comm)) { + dprintf("problem processing PERF_EVENT_COMM, skipping event.\n"); + return -1; + } + total_comm++; + + return 0; +} + +static int +process_fork_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->fork.pid); + struct thread *parent = threads__findnew(event->fork.ppid); + + dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->fork.pid, event->fork.ppid); + + if (!thread || !parent || thread__fork(thread, parent)) { + dprintf("problem processing PERF_EVENT_FORK, skipping event.\n"); + return -1; + } + total_fork++; + + return 0; +} + +static int +process_period_event(event_t *event, unsigned long offset, unsigned long head) +{ + dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->period.time, + event->period.id, + event->period.sample_period); + + return 0; +} + +static int +process_event(event_t *event, unsigned long offset, unsigned long head) +{ + if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) + return process_overflow_event(event, offset, head); + + switch (event->header.type) { + case PERF_EVENT_MMAP: + return process_mmap_event(event, offset, head); + + case PERF_EVENT_COMM: + return process_comm_event(event, offset, head); + + case PERF_EVENT_FORK: + return process_fork_event(event, offset, head); + + case PERF_EVENT_PERIOD: + return process_period_event(event, offset, head); + /* + * We dont process them right now but they are fine: + */ + + case PERF_EVENT_THROTTLE: + case PERF_EVENT_UNTHROTTLE: + return 0; + + default: + return -1; + } + + return 0; +} + +static int +parse_line(FILE *file, struct symbol *sym, __u64 start, __u64 len) +{ + char *line = NULL, *tmp, *tmp2; + unsigned int offset; + size_t line_len; + __u64 line_ip; + int ret; + char *c; + + if (getline(&line, &line_len, file) < 0) + return -1; + if (!line) + return -1; + + c = strchr(line, '\n'); + if (c) + *c = 0; + + line_ip = -1; + offset = 0; + ret = -2; + + /* + * Strip leading spaces: + */ + tmp = line; + while (*tmp) { + if (*tmp != ' ') + break; + tmp++; + } + + if (*tmp) { + /* + * Parse hexa addresses followed by ':' + */ + line_ip = strtoull(tmp, &tmp2, 16); + if (*tmp2 != ':') + line_ip = -1; + } + + if (line_ip != -1) { + unsigned int hits = 0; + double percent = 0.0; + char *color = PERF_COLOR_NORMAL; + + offset = line_ip - start; + if (offset < len) + hits = sym->hist[offset]; + + if (sym->hist_sum) + percent = 100.0 * hits / sym->hist_sum; + + /* + * We color high-overhead entries in red, mid-overhead + * entries in green - and keep the low overhead places + * normal: + */ + if (percent >= 5.0) + color = PERF_COLOR_RED; + else { + if (percent > 0.5) + color = PERF_COLOR_GREEN; + } + + color_fprintf(stdout, color, " %7.2f", percent); + printf(" : "); + color_fprintf(stdout, PERF_COLOR_BLUE, "%s\n", line); + } else { + if (!*line) + printf(" :\n"); + else + printf(" : %s\n", line); + } + + return 0; +} + +static void annotate_sym(struct dso *dso, struct symbol *sym) +{ + char *filename = dso->name; + __u64 start, end, len; + char command[PATH_MAX*2]; + FILE *file; + + if (!filename) + return; + if (dso == kernel_dso) + filename = vmlinux; + + printf("\n------------------------------------------------\n"); + printf(" Percent | Source code & Disassembly of %s\n", filename); + printf("------------------------------------------------\n"); + + if (verbose >= 2) + printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name); + + start = sym->obj_start; + if (!start) + start = sym->start; + + end = start + sym->end - sym->start + 1; + len = sym->end - sym->start; + + sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", (__u64)start, (__u64)end, filename); + + if (verbose >= 3) + printf("doing: %s\n", command); + + file = popen(command, "r"); + if (!file) + return; + + while (!feof(file)) { + if (parse_line(file, sym, start, len) < 0) + break; + } + + pclose(file); +} + +static void find_annotations(void) +{ + struct rb_node *nd; + struct dso *dso; + int count = 0; + + list_for_each_entry(dso, &dsos, node) { + + for (nd = rb_first(&dso->syms); nd; nd = rb_next(nd)) { + struct symbol *sym = rb_entry(nd, struct symbol, rb_node); + + if (sym->hist) { + annotate_sym(dso, sym); + count++; + } + } + } + + if (!count) + printf(" Error: symbol '%s' not present amongst the samples.\n", sym_hist_filter); +} + +static int __cmd_annotate(void) +{ + int ret, rc = EXIT_FAILURE; + unsigned long offset = 0; + unsigned long head = 0; + struct stat stat; + event_t *event; + uint32_t size; + char *buf; + + register_idle_thread(); + + input = open(input_name, O_RDONLY); + if (input < 0) { + perror("failed to open file"); + exit(-1); + } + + ret = fstat(input, &stat); + if (ret < 0) { + perror("failed to stat file"); + exit(-1); + } + + if (!stat.st_size) { + fprintf(stderr, "zero-sized file, nothing to do!\n"); + exit(0); + } + + if (load_kernel() < 0) { + perror("failed to load kernel symbols"); + return EXIT_FAILURE; + } + +remap: + buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ, + MAP_SHARED, input, offset); + if (buf == MAP_FAILED) { + perror("failed to mmap file"); + exit(-1); + } + +more: + event = (event_t *)(buf + head); + + size = event->header.size; + if (!size) + size = 8; + + if (head + event->header.size >= page_size * mmap_window) { + unsigned long shift = page_size * (head / page_size); + int ret; + + ret = munmap(buf, page_size * mmap_window); + assert(ret == 0); + + offset += shift; + head -= shift; + goto remap; + } + + size = event->header.size; + + dprintf("%p [%p]: event: %d\n", + (void *)(offset + head), + (void *)(long)event->header.size, + event->header.type); + + if (!size || process_event(event, offset, head) < 0) { + + dprintf("%p [%p]: skipping unknown header type: %d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->header.type); + + total_unknown++; + + /* + * assume we lost track of the stream, check alignment, and + * increment a single u64 in the hope to catch on again 'soon'. + */ + + if (unlikely(head & 7)) + head &= ~7ULL; + + size = 8; + } + + head += size; + + if (offset + head < stat.st_size) + goto more; + + rc = EXIT_SUCCESS; + close(input); + + dprintf(" IP events: %10ld\n", total); + dprintf(" mmap events: %10ld\n", total_mmap); + dprintf(" comm events: %10ld\n", total_comm); + dprintf(" fork events: %10ld\n", total_fork); + dprintf(" unknown events: %10ld\n", total_unknown); + + if (dump_trace) + return 0; + + if (verbose >= 3) + threads__fprintf(stdout); + + if (verbose >= 2) + dsos__fprintf(stdout); + + collapse__resort(); + output__resort(); + + find_annotations(); + + return rc; +} + +static const char * const annotate_usage[] = { + "perf annotate [] ", + NULL +}; + +static const struct option options[] = { + OPT_STRING('i', "input", &input_name, "file", + "input file name"), + OPT_STRING('s', "symbol", &sym_hist_filter, "symbol", + "symbol to annotate"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show symbol address, etc)"), + OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace, + "dump raw trace in ASCII"), + OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"), + OPT_END() +}; + +static void setup_sorting(void) +{ + char *tmp, *tok, *str = strdup(sort_order); + + for (tok = strtok_r(str, ", ", &tmp); + tok; tok = strtok_r(NULL, ", ", &tmp)) { + if (sort_dimension__add(tok) < 0) { + error("Unknown --sort key: `%s'", tok); + usage_with_options(annotate_usage, options); + } + } + + free(str); +} + +int cmd_annotate(int argc, const char **argv, const char *prefix) +{ + symbol__init(); + + page_size = getpagesize(); + + argc = parse_options(argc, argv, options, annotate_usage, 0); + + setup_sorting(); + + if (argc) { + /* + * Special case: if there's an argument left then assume tha + * it's a symbol filter: + */ + if (argc > 1) + usage_with_options(annotate_usage, options); + + sym_hist_filter = argv[0]; + } + + if (!sym_hist_filter) + usage_with_options(annotate_usage, options); + + setup_pager(); + + return __cmd_annotate(); +} diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c new file mode 100644 index 0000000..0f32dc3 --- /dev/null +++ b/tools/perf/builtin-help.c @@ -0,0 +1,461 @@ +/* + * builtin-help.c + * + * Builtin help command + */ +#include "util/cache.h" +#include "builtin.h" +#include "util/exec_cmd.h" +#include "common-cmds.h" +#include "util/parse-options.h" +#include "util/run-command.h" +#include "util/help.h" + +static struct man_viewer_list { + struct man_viewer_list *next; + char name[FLEX_ARRAY]; +} *man_viewer_list; + +static struct man_viewer_info_list { + struct man_viewer_info_list *next; + const char *info; + char name[FLEX_ARRAY]; +} *man_viewer_info_list; + +enum help_format { + HELP_FORMAT_MAN, + HELP_FORMAT_INFO, + HELP_FORMAT_WEB, +}; + +static int show_all = 0; +static enum help_format help_format = HELP_FORMAT_MAN; +static struct option builtin_help_options[] = { + OPT_BOOLEAN('a', "all", &show_all, "print all available commands"), + OPT_SET_INT('m', "man", &help_format, "show man page", HELP_FORMAT_MAN), + OPT_SET_INT('w', "web", &help_format, "show manual in web browser", + HELP_FORMAT_WEB), + OPT_SET_INT('i', "info", &help_format, "show info page", + HELP_FORMAT_INFO), + OPT_END(), +}; + +static const char * const builtin_help_usage[] = { + "perf help [--all] [--man|--web|--info] [command]", + NULL +}; + +static enum help_format parse_help_format(const char *format) +{ + if (!strcmp(format, "man")) + return HELP_FORMAT_MAN; + if (!strcmp(format, "info")) + return HELP_FORMAT_INFO; + if (!strcmp(format, "web") || !strcmp(format, "html")) + return HELP_FORMAT_WEB; + die("unrecognized help format '%s'", format); +} + +static const char *get_man_viewer_info(const char *name) +{ + struct man_viewer_info_list *viewer; + + for (viewer = man_viewer_info_list; viewer; viewer = viewer->next) + { + if (!strcasecmp(name, viewer->name)) + return viewer->info; + } + return NULL; +} + +static int check_emacsclient_version(void) +{ + struct strbuf buffer = STRBUF_INIT; + struct child_process ec_process; + const char *argv_ec[] = { "emacsclient", "--version", NULL }; + int version; + + /* emacsclient prints its version number on stderr */ + memset(&ec_process, 0, sizeof(ec_process)); + ec_process.argv = argv_ec; + ec_process.err = -1; + ec_process.stdout_to_stderr = 1; + if (start_command(&ec_process)) { + fprintf(stderr, "Failed to start emacsclient.\n"); + return -1; + } + strbuf_read(&buffer, ec_process.err, 20); + close(ec_process.err); + + /* + * Don't bother checking return value, because "emacsclient --version" + * seems to always exits with code 1. + */ + finish_command(&ec_process); + + if (prefixcmp(buffer.buf, "emacsclient")) { + fprintf(stderr, "Failed to parse emacsclient version.\n"); + strbuf_release(&buffer); + return -1; + } + + strbuf_remove(&buffer, 0, strlen("emacsclient")); + version = atoi(buffer.buf); + + if (version < 22) { + fprintf(stderr, + "emacsclient version '%d' too old (< 22).\n", + version); + strbuf_release(&buffer); + return -1; + } + + strbuf_release(&buffer); + return 0; +} + +static void exec_woman_emacs(const char* path, const char *page) +{ + if (!check_emacsclient_version()) { + /* This works only with emacsclient version >= 22. */ + struct strbuf man_page = STRBUF_INIT; + + if (!path) + path = "emacsclient"; + strbuf_addf(&man_page, "(woman \"%s\")", page); + execlp(path, "emacsclient", "-e", man_page.buf, NULL); + warning("failed to exec '%s': %s", path, strerror(errno)); + } +} + +static void exec_man_konqueror(const char* path, const char *page) +{ + const char *display = getenv("DISPLAY"); + if (display && *display) { + struct strbuf man_page = STRBUF_INIT; + const char *filename = "kfmclient"; + + /* It's simpler to launch konqueror using kfmclient. */ + if (path) { + const char *file = strrchr(path, '/'); + if (file && !strcmp(file + 1, "konqueror")) { + char *new = strdup(path); + char *dest = strrchr(new, '/'); + + /* strlen("konqueror") == strlen("kfmclient") */ + strcpy(dest + 1, "kfmclient"); + path = new; + } + if (file) + filename = file; + } else + path = "kfmclient"; + strbuf_addf(&man_page, "man:%s(1)", page); + execlp(path, filename, "newTab", man_page.buf, NULL); + warning("failed to exec '%s': %s", path, strerror(errno)); + } +} + +static void exec_man_man(const char* path, const char *page) +{ + if (!path) + path = "man"; + execlp(path, "man", page, NULL); + warning("failed to exec '%s': %s", path, strerror(errno)); +} + +static void exec_man_cmd(const char *cmd, const char *page) +{ + struct strbuf shell_cmd = STRBUF_INIT; + strbuf_addf(&shell_cmd, "%s %s", cmd, page); + execl("/bin/sh", "sh", "-c", shell_cmd.buf, NULL); + warning("failed to exec '%s': %s", cmd, strerror(errno)); +} + +static void add_man_viewer(const char *name) +{ + struct man_viewer_list **p = &man_viewer_list; + size_t len = strlen(name); + + while (*p) + p = &((*p)->next); + *p = calloc(1, (sizeof(**p) + len + 1)); + strncpy((*p)->name, name, len); +} + +static int supported_man_viewer(const char *name, size_t len) +{ + return (!strncasecmp("man", name, len) || + !strncasecmp("woman", name, len) || + !strncasecmp("konqueror", name, len)); +} + +static void do_add_man_viewer_info(const char *name, + size_t len, + const char *value) +{ + struct man_viewer_info_list *new = calloc(1, sizeof(*new) + len + 1); + + strncpy(new->name, name, len); + new->info = strdup(value); + new->next = man_viewer_info_list; + man_viewer_info_list = new; +} + +static int add_man_viewer_path(const char *name, + size_t len, + const char *value) +{ + if (supported_man_viewer(name, len)) + do_add_man_viewer_info(name, len, value); + else + warning("'%s': path for unsupported man viewer.\n" + "Please consider using 'man..cmd' instead.", + name); + + return 0; +} + +static int add_man_viewer_cmd(const char *name, + size_t len, + const char *value) +{ + if (supported_man_viewer(name, len)) + warning("'%s': cmd for supported man viewer.\n" + "Please consider using 'man..path' instead.", + name); + else + do_add_man_viewer_info(name, len, value); + + return 0; +} + +static int add_man_viewer_info(const char *var, const char *value) +{ + const char *name = var + 4; + const char *subkey = strrchr(name, '.'); + + if (!subkey) + return error("Config with no key for man viewer: %s", name); + + if (!strcmp(subkey, ".path")) { + if (!value) + return config_error_nonbool(var); + return add_man_viewer_path(name, subkey - name, value); + } + if (!strcmp(subkey, ".cmd")) { + if (!value) + return config_error_nonbool(var); + return add_man_viewer_cmd(name, subkey - name, value); + } + + warning("'%s': unsupported man viewer sub key.", subkey); + return 0; +} + +static int perf_help_config(const char *var, const char *value, void *cb) +{ + if (!strcmp(var, "help.format")) { + if (!value) + return config_error_nonbool(var); + help_format = parse_help_format(value); + return 0; + } + if (!strcmp(var, "man.viewer")) { + if (!value) + return config_error_nonbool(var); + add_man_viewer(value); + return 0; + } + if (!prefixcmp(var, "man.")) + return add_man_viewer_info(var, value); + + return perf_default_config(var, value, cb); +} + +static struct cmdnames main_cmds, other_cmds; + +void list_common_cmds_help(void) +{ + int i, longest = 0; + + for (i = 0; i < ARRAY_SIZE(common_cmds); i++) { + if (longest < strlen(common_cmds[i].name)) + longest = strlen(common_cmds[i].name); + } + + puts(" The most commonly used perf commands are:"); + for (i = 0; i < ARRAY_SIZE(common_cmds); i++) { + printf(" %s ", common_cmds[i].name); + mput_char(' ', longest - strlen(common_cmds[i].name)); + puts(common_cmds[i].help); + } +} + +static int is_perf_command(const char *s) +{ + return is_in_cmdlist(&main_cmds, s) || + is_in_cmdlist(&other_cmds, s); +} + +static const char *prepend(const char *prefix, const char *cmd) +{ + size_t pre_len = strlen(prefix); + size_t cmd_len = strlen(cmd); + char *p = malloc(pre_len + cmd_len + 1); + memcpy(p, prefix, pre_len); + strcpy(p + pre_len, cmd); + return p; +} + +static const char *cmd_to_page(const char *perf_cmd) +{ + if (!perf_cmd) + return "perf"; + else if (!prefixcmp(perf_cmd, "perf")) + return perf_cmd; + else if (is_perf_command(perf_cmd)) + return prepend("perf-", perf_cmd); + else + return prepend("perf-", perf_cmd); +} + +static void setup_man_path(void) +{ + struct strbuf new_path = STRBUF_INIT; + const char *old_path = getenv("MANPATH"); + + /* We should always put ':' after our path. If there is no + * old_path, the ':' at the end will let 'man' to try + * system-wide paths after ours to find the manual page. If + * there is old_path, we need ':' as delimiter. */ + strbuf_addstr(&new_path, system_path(PERF_MAN_PATH)); + strbuf_addch(&new_path, ':'); + if (old_path) + strbuf_addstr(&new_path, old_path); + + setenv("MANPATH", new_path.buf, 1); + + strbuf_release(&new_path); +} + +static void exec_viewer(const char *name, const char *page) +{ + const char *info = get_man_viewer_info(name); + + if (!strcasecmp(name, "man")) + exec_man_man(info, page); + else if (!strcasecmp(name, "woman")) + exec_woman_emacs(info, page); + else if (!strcasecmp(name, "konqueror")) + exec_man_konqueror(info, page); + else if (info) + exec_man_cmd(info, page); + else + warning("'%s': unknown man viewer.", name); +} + +static void show_man_page(const char *perf_cmd) +{ + struct man_viewer_list *viewer; + const char *page = cmd_to_page(perf_cmd); + const char *fallback = getenv("PERF_MAN_VIEWER"); + + setup_man_path(); + for (viewer = man_viewer_list; viewer; viewer = viewer->next) + { + exec_viewer(viewer->name, page); /* will return when unable */ + } + if (fallback) + exec_viewer(fallback, page); + exec_viewer("man", page); + die("no man viewer handled the request"); +} + +static void show_info_page(const char *perf_cmd) +{ + const char *page = cmd_to_page(perf_cmd); + setenv("INFOPATH", system_path(PERF_INFO_PATH), 1); + execlp("info", "info", "perfman", page, NULL); +} + +static void get_html_page_path(struct strbuf *page_path, const char *page) +{ + struct stat st; + const char *html_path = system_path(PERF_HTML_PATH); + + /* Check that we have a perf documentation directory. */ + if (stat(mkpath("%s/perf.html", html_path), &st) + || !S_ISREG(st.st_mode)) + die("'%s': not a documentation directory.", html_path); + + strbuf_init(page_path, 0); + strbuf_addf(page_path, "%s/%s.html", html_path, page); +} + +/* + * If open_html is not defined in a platform-specific way (see for + * example compat/mingw.h), we use the script web--browse to display + * HTML. + */ +#ifndef open_html +static void open_html(const char *path) +{ + execl_perf_cmd("web--browse", "-c", "help.browser", path, NULL); +} +#endif + +static void show_html_page(const char *perf_cmd) +{ + const char *page = cmd_to_page(perf_cmd); + struct strbuf page_path; /* it leaks but we exec bellow */ + + get_html_page_path(&page_path, page); + + open_html(page_path.buf); +} + +int cmd_help(int argc, const char **argv, const char *prefix) +{ + const char *alias; + load_command_list("perf-", &main_cmds, &other_cmds); + + perf_config(perf_help_config, NULL); + + argc = parse_options(argc, argv, builtin_help_options, + builtin_help_usage, 0); + + if (show_all) { + printf("\n usage: %s\n\n", perf_usage_string); + list_commands("perf commands", &main_cmds, &other_cmds); + printf(" %s\n\n", perf_more_info_string); + return 0; + } + + if (!argv[0]) { + printf("\n usage: %s\n\n", perf_usage_string); + list_common_cmds_help(); + printf("\n %s\n\n", perf_more_info_string); + return 0; + } + + alias = alias_lookup(argv[0]); + if (alias && !is_perf_command(argv[0])) { + printf("`perf %s' is aliased to `%s'\n", argv[0], alias); + return 0; + } + + switch (help_format) { + case HELP_FORMAT_MAN: + show_man_page(argv[0]); + break; + case HELP_FORMAT_INFO: + show_info_page(argv[0]); + break; + case HELP_FORMAT_WEB: + show_html_page(argv[0]); + break; + } + + return 0; +} diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c new file mode 100644 index 0000000..fe60e37 --- /dev/null +++ b/tools/perf/builtin-list.c @@ -0,0 +1,20 @@ +/* + * builtin-list.c + * + * Builtin list command: list all event types + * + * Copyright (C) 2009, Thomas Gleixner + * Copyright (C) 2008-2009, Red Hat Inc, Ingo Molnar + */ +#include "builtin.h" + +#include "perf.h" + +#include "util/parse-options.h" +#include "util/parse-events.h" + +int cmd_list(int argc, const char **argv, const char *prefix) +{ + print_events(); + return 0; +} diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c new file mode 100644 index 0000000..0f5771f --- /dev/null +++ b/tools/perf/builtin-record.c @@ -0,0 +1,585 @@ +/* + * builtin-record.c + * + * Builtin record command: Record the profile of a workload + * (or a CPU, or a PID) into the perf.data output file - for + * later analysis via perf report. + */ +#include "builtin.h" + +#include "perf.h" + +#include "util/util.h" +#include "util/parse-options.h" +#include "util/parse-events.h" +#include "util/string.h" + +#include +#include + +#define ALIGN(x, a) __ALIGN_MASK(x, (typeof(x))(a)-1) +#define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask)) + +static int fd[MAX_NR_CPUS][MAX_COUNTERS]; + +static long default_interval = 100000; + +static int nr_cpus = 0; +static unsigned int page_size; +static unsigned int mmap_pages = 128; +static int freq = 0; +static int output; +static const char *output_name = "perf.data"; +static int group = 0; +static unsigned int realtime_prio = 0; +static int system_wide = 0; +static pid_t target_pid = -1; +static int inherit = 1; +static int force = 0; +static int append_file = 0; +static int verbose = 0; + +static long samples; +static struct timeval last_read; +static struct timeval this_read; + +static __u64 bytes_written; + +static struct pollfd event_array[MAX_NR_CPUS * MAX_COUNTERS]; + +static int nr_poll; +static int nr_cpu; + +struct mmap_event { + struct perf_event_header header; + __u32 pid; + __u32 tid; + __u64 start; + __u64 len; + __u64 pgoff; + char filename[PATH_MAX]; +}; + +struct comm_event { + struct perf_event_header header; + __u32 pid; + __u32 tid; + char comm[16]; +}; + + +struct mmap_data { + int counter; + void *base; + unsigned int mask; + unsigned int prev; +}; + +static struct mmap_data mmap_array[MAX_NR_CPUS][MAX_COUNTERS]; + +static unsigned int mmap_read_head(struct mmap_data *md) +{ + struct perf_counter_mmap_page *pc = md->base; + int head; + + head = pc->data_head; + rmb(); + + return head; +} + +static void mmap_read(struct mmap_data *md) +{ + unsigned int head = mmap_read_head(md); + unsigned int old = md->prev; + unsigned char *data = md->base + page_size; + unsigned long size; + void *buf; + int diff; + + gettimeofday(&this_read, NULL); + + /* + * If we're further behind than half the buffer, there's a chance + * the writer will bite our tail and mess up the samples under us. + * + * If we somehow ended up ahead of the head, we got messed up. + * + * In either case, truncate and restart at head. + */ + diff = head - old; + if (diff > md->mask / 2 || diff < 0) { + struct timeval iv; + unsigned long msecs; + + timersub(&this_read, &last_read, &iv); + msecs = iv.tv_sec*1000 + iv.tv_usec/1000; + + fprintf(stderr, "WARNING: failed to keep up with mmap data." + " Last read %lu msecs ago.\n", msecs); + + /* + * head points to a known good entry, start there. + */ + old = head; + } + + last_read = this_read; + + if (old != head) + samples++; + + size = head - old; + + if ((old & md->mask) + size != (head & md->mask)) { + buf = &data[old & md->mask]; + size = md->mask + 1 - (old & md->mask); + old += size; + + while (size) { + int ret = write(output, buf, size); + + if (ret < 0) + die("failed to write"); + + size -= ret; + buf += ret; + + bytes_written += ret; + } + } + + buf = &data[old & md->mask]; + size = head - old; + old += size; + + while (size) { + int ret = write(output, buf, size); + + if (ret < 0) + die("failed to write"); + + size -= ret; + buf += ret; + + bytes_written += ret; + } + + md->prev = old; +} + +static volatile int done = 0; +static volatile int signr = -1; + +static void sig_handler(int sig) +{ + done = 1; + signr = sig; +} + +static void sig_atexit(void) +{ + if (signr == -1) + return; + + signal(signr, SIG_DFL); + kill(getpid(), signr); +} + +static void pid_synthesize_comm_event(pid_t pid, int full) +{ + struct comm_event comm_ev; + char filename[PATH_MAX]; + char bf[BUFSIZ]; + int fd, ret; + size_t size; + char *field, *sep; + DIR *tasks; + struct dirent dirent, *next; + + snprintf(filename, sizeof(filename), "/proc/%d/stat", pid); + + fd = open(filename, O_RDONLY); + if (fd < 0) { + fprintf(stderr, "couldn't open %s\n", filename); + exit(EXIT_FAILURE); + } + if (read(fd, bf, sizeof(bf)) < 0) { + fprintf(stderr, "couldn't read %s\n", filename); + exit(EXIT_FAILURE); + } + close(fd); + + /* 9027 (cat) R 6747 9027 6747 34816 9027 ... */ + memset(&comm_ev, 0, sizeof(comm_ev)); + field = strchr(bf, '('); + if (field == NULL) + goto out_failure; + sep = strchr(++field, ')'); + if (sep == NULL) + goto out_failure; + size = sep - field; + memcpy(comm_ev.comm, field, size++); + + comm_ev.pid = pid; + comm_ev.header.type = PERF_EVENT_COMM; + size = ALIGN(size, sizeof(__u64)); + comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size); + + if (!full) { + comm_ev.tid = pid; + + ret = write(output, &comm_ev, comm_ev.header.size); + if (ret < 0) { + perror("failed to write"); + exit(-1); + } + return; + } + + snprintf(filename, sizeof(filename), "/proc/%d/task", pid); + + tasks = opendir(filename); + while (!readdir_r(tasks, &dirent, &next) && next) { + char *end; + pid = strtol(dirent.d_name, &end, 10); + if (*end) + continue; + + comm_ev.tid = pid; + + ret = write(output, &comm_ev, comm_ev.header.size); + if (ret < 0) { + perror("failed to write"); + exit(-1); + } + } + closedir(tasks); + return; + +out_failure: + fprintf(stderr, "couldn't get COMM and pgid, malformed %s\n", + filename); + exit(EXIT_FAILURE); +} + +static void pid_synthesize_mmap_samples(pid_t pid) +{ + char filename[PATH_MAX]; + FILE *fp; + + snprintf(filename, sizeof(filename), "/proc/%d/maps", pid); + + fp = fopen(filename, "r"); + if (fp == NULL) { + fprintf(stderr, "couldn't open %s\n", filename); + exit(EXIT_FAILURE); + } + while (1) { + char bf[BUFSIZ], *pbf = bf; + struct mmap_event mmap_ev = { + .header.type = PERF_EVENT_MMAP, + }; + int n; + size_t size; + if (fgets(bf, sizeof(bf), fp) == NULL) + break; + + /* 00400000-0040c000 r-xp 00000000 fd:01 41038 /bin/cat */ + n = hex2u64(pbf, &mmap_ev.start); + if (n < 0) + continue; + pbf += n + 1; + n = hex2u64(pbf, &mmap_ev.len); + if (n < 0) + continue; + pbf += n + 3; + if (*pbf == 'x') { /* vm_exec */ + char *execname = strrchr(bf, ' '); + + if (execname == NULL || execname[1] != '/') + continue; + + execname += 1; + size = strlen(execname); + execname[size - 1] = '\0'; /* Remove \n */ + memcpy(mmap_ev.filename, execname, size); + size = ALIGN(size, sizeof(__u64)); + mmap_ev.len -= mmap_ev.start; + mmap_ev.header.size = (sizeof(mmap_ev) - + (sizeof(mmap_ev.filename) - size)); + mmap_ev.pid = pid; + mmap_ev.tid = pid; + + if (write(output, &mmap_ev, mmap_ev.header.size) < 0) { + perror("failed to write"); + exit(-1); + } + } + } + + fclose(fp); +} + +static void synthesize_samples(void) +{ + DIR *proc; + struct dirent dirent, *next; + + proc = opendir("/proc"); + + while (!readdir_r(proc, &dirent, &next) && next) { + char *end; + pid_t pid; + + pid = strtol(dirent.d_name, &end, 10); + if (*end) /* only interested in proper numerical dirents */ + continue; + + pid_synthesize_comm_event(pid, 1); + pid_synthesize_mmap_samples(pid); + } + + closedir(proc); +} + +static int group_fd; + +static void create_counter(int counter, int cpu, pid_t pid) +{ + struct perf_counter_attr *attr = attrs + counter; + int track = 1; + + attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID; + if (freq) { + attr->sample_type |= PERF_SAMPLE_PERIOD; + attr->freq = 1; + attr->sample_freq = freq; + } + attr->mmap = track; + attr->comm = track; + attr->inherit = (cpu < 0) && inherit; + attr->disabled = 1; + + track = 0; /* only the first counter needs these */ + +try_again: + fd[nr_cpu][counter] = sys_perf_counter_open(attr, pid, cpu, group_fd, 0); + + if (fd[nr_cpu][counter] < 0) { + int err = errno; + + if (err == EPERM) + die("Permission error - are you root?\n"); + + /* + * If it's cycles then fall back to hrtimer + * based cpu-clock-tick sw counter, which + * is always available even if no PMU support: + */ + if (attr->type == PERF_TYPE_HARDWARE + && attr->config == PERF_COUNT_HW_CPU_CYCLES) { + + if (verbose) + warning(" ... trying to fall back to cpu-clock-ticks\n"); + attr->type = PERF_TYPE_SOFTWARE; + attr->config = PERF_COUNT_SW_CPU_CLOCK; + goto try_again; + } + printf("\n"); + error("perfcounter syscall returned with %d (%s)\n", + fd[nr_cpu][counter], strerror(err)); + die("No CONFIG_PERF_COUNTERS=y kernel support configured?\n"); + exit(-1); + } + + assert(fd[nr_cpu][counter] >= 0); + fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK); + + /* + * First counter acts as the group leader: + */ + if (group && group_fd == -1) + group_fd = fd[nr_cpu][counter]; + + event_array[nr_poll].fd = fd[nr_cpu][counter]; + event_array[nr_poll].events = POLLIN; + nr_poll++; + + mmap_array[nr_cpu][counter].counter = counter; + mmap_array[nr_cpu][counter].prev = 0; + mmap_array[nr_cpu][counter].mask = mmap_pages*page_size - 1; + mmap_array[nr_cpu][counter].base = mmap(NULL, (mmap_pages+1)*page_size, + PROT_READ, MAP_SHARED, fd[nr_cpu][counter], 0); + if (mmap_array[nr_cpu][counter].base == MAP_FAILED) { + error("failed to mmap with %d (%s)\n", errno, strerror(errno)); + exit(-1); + } + + ioctl(fd[nr_cpu][counter], PERF_COUNTER_IOC_ENABLE); +} + +static void open_counters(int cpu, pid_t pid) +{ + int counter; + + if (pid > 0) { + pid_synthesize_comm_event(pid, 0); + pid_synthesize_mmap_samples(pid); + } + + group_fd = -1; + for (counter = 0; counter < nr_counters; counter++) + create_counter(counter, cpu, pid); + + nr_cpu++; +} + +static int __cmd_record(int argc, const char **argv) +{ + int i, counter; + struct stat st; + pid_t pid; + int flags; + int ret; + + page_size = sysconf(_SC_PAGE_SIZE); + nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); + assert(nr_cpus <= MAX_NR_CPUS); + assert(nr_cpus >= 0); + + if (!stat(output_name, &st) && !force && !append_file) { + fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n", + output_name); + exit(-1); + } + + flags = O_CREAT|O_RDWR; + if (append_file) + flags |= O_APPEND; + else + flags |= O_TRUNC; + + output = open(output_name, flags, S_IRUSR|S_IWUSR); + if (output < 0) { + perror("failed to create output file"); + exit(-1); + } + + if (!system_wide) { + open_counters(-1, target_pid != -1 ? target_pid : getpid()); + } else for (i = 0; i < nr_cpus; i++) + open_counters(i, target_pid); + + atexit(sig_atexit); + signal(SIGCHLD, sig_handler); + signal(SIGINT, sig_handler); + + if (target_pid == -1 && argc) { + pid = fork(); + if (pid < 0) + perror("failed to fork"); + + if (!pid) { + if (execvp(argv[0], (char **)argv)) { + perror(argv[0]); + exit(-1); + } + } + } + + if (realtime_prio) { + struct sched_param param; + + param.sched_priority = realtime_prio; + if (sched_setscheduler(0, SCHED_FIFO, ¶m)) { + printf("Could not set realtime priority.\n"); + exit(-1); + } + } + + if (system_wide) + synthesize_samples(); + + while (!done) { + int hits = samples; + + for (i = 0; i < nr_cpu; i++) { + for (counter = 0; counter < nr_counters; counter++) + mmap_read(&mmap_array[i][counter]); + } + + if (hits == samples) + ret = poll(event_array, nr_poll, 100); + } + + /* + * Approximate RIP event size: 24 bytes. + */ + fprintf(stderr, + "[ perf record: Captured and wrote %.3f MB %s (~%lld samples) ]\n", + (double)bytes_written / 1024.0 / 1024.0, + output_name, + bytes_written / 24); + + return 0; +} + +static const char * const record_usage[] = { + "perf record [] []", + "perf record [] -- []", + NULL +}; + +static const struct option options[] = { + OPT_CALLBACK('e', "event", NULL, "event", + "event selector. use 'perf list' to list available events", + parse_events), + OPT_INTEGER('p', "pid", &target_pid, + "record events on existing pid"), + OPT_INTEGER('r', "realtime", &realtime_prio, + "collect data with this RT SCHED_FIFO priority"), + OPT_BOOLEAN('a', "all-cpus", &system_wide, + "system-wide collection from all CPUs"), + OPT_BOOLEAN('A', "append", &append_file, + "append to the output file to do incremental profiling"), + OPT_BOOLEAN('f', "force", &force, + "overwrite existing data file"), + OPT_LONG('c', "count", &default_interval, + "event period to sample"), + OPT_STRING('o', "output", &output_name, "file", + "output file name"), + OPT_BOOLEAN('i', "inherit", &inherit, + "child tasks inherit counters"), + OPT_INTEGER('F', "freq", &freq, + "profile at this frequency"), + OPT_INTEGER('m', "mmap-pages", &mmap_pages, + "number of mmap data pages"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show counter open errors, etc)"), + OPT_END() +}; + +int cmd_record(int argc, const char **argv, const char *prefix) +{ + int counter; + + argc = parse_options(argc, argv, options, record_usage, 0); + if (!argc && target_pid == -1 && !system_wide) + usage_with_options(record_usage, options); + + if (!nr_counters) { + nr_counters = 1; + attrs[0].type = PERF_TYPE_HARDWARE; + attrs[0].config = PERF_COUNT_HW_CPU_CYCLES; + } + + for (counter = 0; counter < nr_counters; counter++) { + if (attrs[counter].sample_period) + continue; + + attrs[counter].sample_period = default_interval; + } + + return __cmd_record(argc, argv); +} diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c new file mode 100644 index 0000000..82fa93b --- /dev/null +++ b/tools/perf/builtin-report.c @@ -0,0 +1,1316 @@ +/* + * builtin-report.c + * + * Builtin report command: Analyze the perf.data input file, + * look up and read DSOs and symbol information and display + * a histogram of results, along various sorting keys. + */ +#include "builtin.h" + +#include "util/util.h" + +#include "util/color.h" +#include "util/list.h" +#include "util/cache.h" +#include "util/rbtree.h" +#include "util/symbol.h" +#include "util/string.h" + +#include "perf.h" + +#include "util/parse-options.h" +#include "util/parse-events.h" + +#define SHOW_KERNEL 1 +#define SHOW_USER 2 +#define SHOW_HV 4 + +static char const *input_name = "perf.data"; +static char *vmlinux = NULL; + +static char default_sort_order[] = "comm,dso"; +static char *sort_order = default_sort_order; + +static int input; +static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV; + +static int dump_trace = 0; +#define dprintf(x...) do { if (dump_trace) printf(x); } while (0) + +static int verbose; +static int full_paths; + +static unsigned long page_size; +static unsigned long mmap_window = 32; + +struct ip_event { + struct perf_event_header header; + __u64 ip; + __u32 pid, tid; + __u64 period; +}; + +struct mmap_event { + struct perf_event_header header; + __u32 pid, tid; + __u64 start; + __u64 len; + __u64 pgoff; + char filename[PATH_MAX]; +}; + +struct comm_event { + struct perf_event_header header; + __u32 pid, tid; + char comm[16]; +}; + +struct fork_event { + struct perf_event_header header; + __u32 pid, ppid; +}; + +struct period_event { + struct perf_event_header header; + __u64 time; + __u64 id; + __u64 sample_period; +}; + +typedef union event_union { + struct perf_event_header header; + struct ip_event ip; + struct mmap_event mmap; + struct comm_event comm; + struct fork_event fork; + struct period_event period; +} event_t; + +static LIST_HEAD(dsos); +static struct dso *kernel_dso; +static struct dso *vdso; + +static void dsos__add(struct dso *dso) +{ + list_add_tail(&dso->node, &dsos); +} + +static struct dso *dsos__find(const char *name) +{ + struct dso *pos; + + list_for_each_entry(pos, &dsos, node) + if (strcmp(pos->name, name) == 0) + return pos; + return NULL; +} + +static struct dso *dsos__findnew(const char *name) +{ + struct dso *dso = dsos__find(name); + int nr; + + if (dso) + return dso; + + dso = dso__new(name, 0); + if (!dso) + goto out_delete_dso; + + nr = dso__load(dso, NULL, verbose); + if (nr < 0) { + if (verbose) + fprintf(stderr, "Failed to open: %s\n", name); + goto out_delete_dso; + } + if (!nr && verbose) { + fprintf(stderr, + "No symbols found in: %s, maybe install a debug package?\n", + name); + } + + dsos__add(dso); + + return dso; + +out_delete_dso: + dso__delete(dso); + return NULL; +} + +static void dsos__fprintf(FILE *fp) +{ + struct dso *pos; + + list_for_each_entry(pos, &dsos, node) + dso__fprintf(pos, fp); +} + +static struct symbol *vdso__find_symbol(struct dso *dso, __u64 ip) +{ + return dso__find_symbol(kernel_dso, ip); +} + +static int load_kernel(void) +{ + int err; + + kernel_dso = dso__new("[kernel]", 0); + if (!kernel_dso) + return -1; + + err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose); + if (err) { + dso__delete(kernel_dso); + kernel_dso = NULL; + } else + dsos__add(kernel_dso); + + vdso = dso__new("[vdso]", 0); + if (!vdso) + return -1; + + vdso->find_symbol = vdso__find_symbol; + + dsos__add(vdso); + + return err; +} + +static char __cwd[PATH_MAX]; +static char *cwd = __cwd; +static int cwdlen; + +static int strcommon(const char *pathname) +{ + int n = 0; + + while (pathname[n] == cwd[n] && n < cwdlen) + ++n; + + return n; +} + +struct map { + struct list_head node; + __u64 start; + __u64 end; + __u64 pgoff; + __u64 (*map_ip)(struct map *, __u64); + struct dso *dso; +}; + +static __u64 map__map_ip(struct map *map, __u64 ip) +{ + return ip - map->start + map->pgoff; +} + +static __u64 vdso__map_ip(struct map *map, __u64 ip) +{ + return ip; +} + +static inline int is_anon_memory(const char *filename) +{ + return strcmp(filename, "//anon") == 0; +} + +static struct map *map__new(struct mmap_event *event) +{ + struct map *self = malloc(sizeof(*self)); + + if (self != NULL) { + const char *filename = event->filename; + char newfilename[PATH_MAX]; + int anon; + + if (cwd) { + int n = strcommon(filename); + + if (n == cwdlen) { + snprintf(newfilename, sizeof(newfilename), + ".%s", filename + n); + filename = newfilename; + } + } + + anon = is_anon_memory(filename); + + if (anon) { + snprintf(newfilename, sizeof(newfilename), "/tmp/perf-%d.map", event->pid); + filename = newfilename; + } + + self->start = event->start; + self->end = event->start + event->len; + self->pgoff = event->pgoff; + + self->dso = dsos__findnew(filename); + if (self->dso == NULL) + goto out_delete; + + if (self->dso == vdso || anon) + self->map_ip = vdso__map_ip; + else + self->map_ip = map__map_ip; + } + return self; +out_delete: + free(self); + return NULL; +} + +static struct map *map__clone(struct map *self) +{ + struct map *map = malloc(sizeof(*self)); + + if (!map) + return NULL; + + memcpy(map, self, sizeof(*self)); + + return map; +} + +static int map__overlap(struct map *l, struct map *r) +{ + if (l->start > r->start) { + struct map *t = l; + l = r; + r = t; + } + + if (l->end > r->start) + return 1; + + return 0; +} + +static size_t map__fprintf(struct map *self, FILE *fp) +{ + return fprintf(fp, " %Lx-%Lx %Lx %s\n", + self->start, self->end, self->pgoff, self->dso->name); +} + + +struct thread { + struct rb_node rb_node; + struct list_head maps; + pid_t pid; + char *comm; +}; + +static struct thread *thread__new(pid_t pid) +{ + struct thread *self = malloc(sizeof(*self)); + + if (self != NULL) { + self->pid = pid; + self->comm = malloc(32); + if (self->comm) + snprintf(self->comm, 32, ":%d", self->pid); + INIT_LIST_HEAD(&self->maps); + } + + return self; +} + +static int thread__set_comm(struct thread *self, const char *comm) +{ + if (self->comm) + free(self->comm); + self->comm = strdup(comm); + return self->comm ? 0 : -ENOMEM; +} + +static size_t thread__fprintf(struct thread *self, FILE *fp) +{ + struct map *pos; + size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm); + + list_for_each_entry(pos, &self->maps, node) + ret += map__fprintf(pos, fp); + + return ret; +} + + +static struct rb_root threads; +static struct thread *last_match; + +static struct thread *threads__findnew(pid_t pid) +{ + struct rb_node **p = &threads.rb_node; + struct rb_node *parent = NULL; + struct thread *th; + + /* + * Font-end cache - PID lookups come in blocks, + * so most of the time we dont have to look up + * the full rbtree: + */ + if (last_match && last_match->pid == pid) + return last_match; + + while (*p != NULL) { + parent = *p; + th = rb_entry(parent, struct thread, rb_node); + + if (th->pid == pid) { + last_match = th; + return th; + } + + if (pid < th->pid) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + th = thread__new(pid); + if (th != NULL) { + rb_link_node(&th->rb_node, parent, p); + rb_insert_color(&th->rb_node, &threads); + last_match = th; + } + + return th; +} + +static void thread__insert_map(struct thread *self, struct map *map) +{ + struct map *pos, *tmp; + + list_for_each_entry_safe(pos, tmp, &self->maps, node) { + if (map__overlap(pos, map)) { + list_del_init(&pos->node); + /* XXX leaks dsos */ + free(pos); + } + } + + list_add_tail(&map->node, &self->maps); +} + +static int thread__fork(struct thread *self, struct thread *parent) +{ + struct map *map; + + if (self->comm) + free(self->comm); + self->comm = strdup(parent->comm); + if (!self->comm) + return -ENOMEM; + + list_for_each_entry(map, &parent->maps, node) { + struct map *new = map__clone(map); + if (!new) + return -ENOMEM; + thread__insert_map(self, new); + } + + return 0; +} + +static struct map *thread__find_map(struct thread *self, __u64 ip) +{ + struct map *pos; + + if (self == NULL) + return NULL; + + list_for_each_entry(pos, &self->maps, node) + if (ip >= pos->start && ip <= pos->end) + return pos; + + return NULL; +} + +static size_t threads__fprintf(FILE *fp) +{ + size_t ret = 0; + struct rb_node *nd; + + for (nd = rb_first(&threads); nd; nd = rb_next(nd)) { + struct thread *pos = rb_entry(nd, struct thread, rb_node); + + ret += thread__fprintf(pos, fp); + } + + return ret; +} + +/* + * histogram, sorted on item, collects counts + */ + +static struct rb_root hist; + +struct hist_entry { + struct rb_node rb_node; + + struct thread *thread; + struct map *map; + struct dso *dso; + struct symbol *sym; + __u64 ip; + char level; + + __u64 count; +}; + +/* + * configurable sorting bits + */ + +struct sort_entry { + struct list_head list; + + char *header; + + int64_t (*cmp)(struct hist_entry *, struct hist_entry *); + int64_t (*collapse)(struct hist_entry *, struct hist_entry *); + size_t (*print)(FILE *fp, struct hist_entry *); +}; + +/* --sort pid */ + +static int64_t +sort__thread_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static size_t +sort__thread_print(FILE *fp, struct hist_entry *self) +{ + return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid); +} + +static struct sort_entry sort_thread = { + .header = " Command: Pid", + .cmp = sort__thread_cmp, + .print = sort__thread_print, +}; + +/* --sort comm */ + +static int64_t +sort__comm_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static int64_t +sort__comm_collapse(struct hist_entry *left, struct hist_entry *right) +{ + char *comm_l = left->thread->comm; + char *comm_r = right->thread->comm; + + if (!comm_l || !comm_r) { + if (!comm_l && !comm_r) + return 0; + else if (!comm_l) + return -1; + else + return 1; + } + + return strcmp(comm_l, comm_r); +} + +static size_t +sort__comm_print(FILE *fp, struct hist_entry *self) +{ + return fprintf(fp, "%16s", self->thread->comm); +} + +static struct sort_entry sort_comm = { + .header = " Command", + .cmp = sort__comm_cmp, + .collapse = sort__comm_collapse, + .print = sort__comm_print, +}; + +/* --sort dso */ + +static int64_t +sort__dso_cmp(struct hist_entry *left, struct hist_entry *right) +{ + struct dso *dso_l = left->dso; + struct dso *dso_r = right->dso; + + if (!dso_l || !dso_r) { + if (!dso_l && !dso_r) + return 0; + else if (!dso_l) + return -1; + else + return 1; + } + + return strcmp(dso_l->name, dso_r->name); +} + +static size_t +sort__dso_print(FILE *fp, struct hist_entry *self) +{ + if (self->dso) + return fprintf(fp, "%-25s", self->dso->name); + + return fprintf(fp, "%016llx ", (__u64)self->ip); +} + +static struct sort_entry sort_dso = { + .header = "Shared Object ", + .cmp = sort__dso_cmp, + .print = sort__dso_print, +}; + +/* --sort symbol */ + +static int64_t +sort__sym_cmp(struct hist_entry *left, struct hist_entry *right) +{ + __u64 ip_l, ip_r; + + if (left->sym == right->sym) + return 0; + + ip_l = left->sym ? left->sym->start : left->ip; + ip_r = right->sym ? right->sym->start : right->ip; + + return (int64_t)(ip_r - ip_l); +} + +static size_t +sort__sym_print(FILE *fp, struct hist_entry *self) +{ + size_t ret = 0; + + if (verbose) + ret += fprintf(fp, "%#018llx ", (__u64)self->ip); + + if (self->sym) { + ret += fprintf(fp, "[%c] %s", + self->dso == kernel_dso ? 'k' : '.', self->sym->name); + } else { + ret += fprintf(fp, "%#016llx", (__u64)self->ip); + } + + return ret; +} + +static struct sort_entry sort_sym = { + .header = "Symbol", + .cmp = sort__sym_cmp, + .print = sort__sym_print, +}; + +static int sort__need_collapse = 0; + +struct sort_dimension { + char *name; + struct sort_entry *entry; + int taken; +}; + +static struct sort_dimension sort_dimensions[] = { + { .name = "pid", .entry = &sort_thread, }, + { .name = "comm", .entry = &sort_comm, }, + { .name = "dso", .entry = &sort_dso, }, + { .name = "symbol", .entry = &sort_sym, }, +}; + +static LIST_HEAD(hist_entry__sort_list); + +static int sort_dimension__add(char *tok) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) { + struct sort_dimension *sd = &sort_dimensions[i]; + + if (sd->taken) + continue; + + if (strncasecmp(tok, sd->name, strlen(tok))) + continue; + + if (sd->entry->collapse) + sort__need_collapse = 1; + + list_add_tail(&sd->entry->list, &hist_entry__sort_list); + sd->taken = 1; + + return 0; + } + + return -ESRCH; +} + +static int64_t +hist_entry__cmp(struct hist_entry *left, struct hist_entry *right) +{ + struct sort_entry *se; + int64_t cmp = 0; + + list_for_each_entry(se, &hist_entry__sort_list, list) { + cmp = se->cmp(left, right); + if (cmp) + break; + } + + return cmp; +} + +static int64_t +hist_entry__collapse(struct hist_entry *left, struct hist_entry *right) +{ + struct sort_entry *se; + int64_t cmp = 0; + + list_for_each_entry(se, &hist_entry__sort_list, list) { + int64_t (*f)(struct hist_entry *, struct hist_entry *); + + f = se->collapse ?: se->cmp; + + cmp = f(left, right); + if (cmp) + break; + } + + return cmp; +} + +static size_t +hist_entry__fprintf(FILE *fp, struct hist_entry *self, __u64 total_samples) +{ + struct sort_entry *se; + size_t ret; + + if (total_samples) { + double percent = self->count * 100.0 / total_samples; + char *color = PERF_COLOR_NORMAL; + + /* + * We color high-overhead entries in red, mid-overhead + * entries in green - and keep the low overhead places + * normal: + */ + if (percent >= 5.0) { + color = PERF_COLOR_RED; + } else { + if (percent >= 0.5) + color = PERF_COLOR_GREEN; + } + + ret = color_fprintf(fp, color, " %6.2f%%", + (self->count * 100.0) / total_samples); + } else + ret = fprintf(fp, "%12Ld ", self->count); + + list_for_each_entry(se, &hist_entry__sort_list, list) { + fprintf(fp, " "); + ret += se->print(fp, self); + } + + ret += fprintf(fp, "\n"); + + return ret; +} + +/* + * collect histogram counts + */ + +static int +hist_entry__add(struct thread *thread, struct map *map, struct dso *dso, + struct symbol *sym, __u64 ip, char level, __u64 count) +{ + struct rb_node **p = &hist.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *he; + struct hist_entry entry = { + .thread = thread, + .map = map, + .dso = dso, + .sym = sym, + .ip = ip, + .level = level, + .count = count, + }; + int cmp; + + while (*p != NULL) { + parent = *p; + he = rb_entry(parent, struct hist_entry, rb_node); + + cmp = hist_entry__cmp(&entry, he); + + if (!cmp) { + he->count += count; + return 0; + } + + if (cmp < 0) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + he = malloc(sizeof(*he)); + if (!he) + return -ENOMEM; + *he = entry; + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &hist); + + return 0; +} + +static void hist_entry__free(struct hist_entry *he) +{ + free(he); +} + +/* + * collapse the histogram + */ + +static struct rb_root collapse_hists; + +static void collapse__insert_entry(struct hist_entry *he) +{ + struct rb_node **p = &collapse_hists.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *iter; + int64_t cmp; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct hist_entry, rb_node); + + cmp = hist_entry__collapse(iter, he); + + if (!cmp) { + iter->count += he->count; + hist_entry__free(he); + return; + } + + if (cmp < 0) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &collapse_hists); +} + +static void collapse__resort(void) +{ + struct rb_node *next; + struct hist_entry *n; + + if (!sort__need_collapse) + return; + + next = rb_first(&hist); + while (next) { + n = rb_entry(next, struct hist_entry, rb_node); + next = rb_next(&n->rb_node); + + rb_erase(&n->rb_node, &hist); + collapse__insert_entry(n); + } +} + +/* + * reverse the map, sort on count. + */ + +static struct rb_root output_hists; + +static void output__insert_entry(struct hist_entry *he) +{ + struct rb_node **p = &output_hists.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *iter; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct hist_entry, rb_node); + + if (he->count > iter->count) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &output_hists); +} + +static void output__resort(void) +{ + struct rb_node *next; + struct hist_entry *n; + struct rb_root *tree = &hist; + + if (sort__need_collapse) + tree = &collapse_hists; + + next = rb_first(tree); + + while (next) { + n = rb_entry(next, struct hist_entry, rb_node); + next = rb_next(&n->rb_node); + + rb_erase(&n->rb_node, tree); + output__insert_entry(n); + } +} + +static size_t output__fprintf(FILE *fp, __u64 total_samples) +{ + struct hist_entry *pos; + struct sort_entry *se; + struct rb_node *nd; + size_t ret = 0; + + fprintf(fp, "\n"); + fprintf(fp, "#\n"); + fprintf(fp, "# (%Ld samples)\n", (__u64)total_samples); + fprintf(fp, "#\n"); + + fprintf(fp, "# Overhead"); + list_for_each_entry(se, &hist_entry__sort_list, list) + fprintf(fp, " %s", se->header); + fprintf(fp, "\n"); + + fprintf(fp, "# ........"); + list_for_each_entry(se, &hist_entry__sort_list, list) { + int i; + + fprintf(fp, " "); + for (i = 0; i < strlen(se->header); i++) + fprintf(fp, "."); + } + fprintf(fp, "\n"); + + fprintf(fp, "#\n"); + + for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) { + pos = rb_entry(nd, struct hist_entry, rb_node); + ret += hist_entry__fprintf(fp, pos, total_samples); + } + + if (!strcmp(sort_order, default_sort_order)) { + fprintf(fp, "#\n"); + fprintf(fp, "# (For more details, try: perf report --sort comm,dso,symbol)\n"); + fprintf(fp, "#\n"); + } + fprintf(fp, "\n"); + + return ret; +} + +static void register_idle_thread(void) +{ + struct thread *thread = threads__findnew(0); + + if (thread == NULL || + thread__set_comm(thread, "[idle]")) { + fprintf(stderr, "problem inserting idle task.\n"); + exit(-1); + } +} + +static unsigned long total = 0, + total_mmap = 0, + total_comm = 0, + total_fork = 0, + total_unknown = 0; + +static int +process_overflow_event(event_t *event, unsigned long offset, unsigned long head) +{ + char level; + int show = 0; + struct dso *dso = NULL; + struct thread *thread = threads__findnew(event->ip.pid); + __u64 ip = event->ip.ip; + __u64 period = 1; + struct map *map = NULL; + + if (event->header.type & PERF_SAMPLE_PERIOD) + period = event->ip.period; + + dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->header.misc, + event->ip.pid, + (void *)(long)ip, + (long long)period); + + dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid); + + if (thread == NULL) { + fprintf(stderr, "problem processing %d event, skipping it.\n", + event->header.type); + return -1; + } + + if (event->header.misc & PERF_EVENT_MISC_KERNEL) { + show = SHOW_KERNEL; + level = 'k'; + + dso = kernel_dso; + + dprintf(" ...... dso: %s\n", dso->name); + + } else if (event->header.misc & PERF_EVENT_MISC_USER) { + + show = SHOW_USER; + level = '.'; + + map = thread__find_map(thread, ip); + if (map != NULL) { + ip = map->map_ip(map, ip); + dso = map->dso; + } else { + /* + * If this is outside of all known maps, + * and is a negative address, try to look it + * up in the kernel dso, as it might be a + * vsyscall (which executes in user-mode): + */ + if ((long long)ip < 0) + dso = kernel_dso; + } + dprintf(" ...... dso: %s\n", dso ? dso->name : ""); + + } else { + show = SHOW_HV; + level = 'H'; + dprintf(" ...... dso: [hypervisor]\n"); + } + + if (show & show_mask) { + struct symbol *sym = NULL; + + if (dso) + sym = dso->find_symbol(dso, ip); + + if (hist_entry__add(thread, map, dso, sym, ip, level, period)) { + fprintf(stderr, + "problem incrementing symbol count, skipping event\n"); + return -1; + } + } + total += period; + + return 0; +} + +static int +process_mmap_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->mmap.pid); + struct map *map = map__new(&event->mmap); + + dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->mmap.pid, + (void *)(long)event->mmap.start, + (void *)(long)event->mmap.len, + (void *)(long)event->mmap.pgoff, + event->mmap.filename); + + if (thread == NULL || map == NULL) { + dprintf("problem processing PERF_EVENT_MMAP, skipping event.\n"); + return 0; + } + + thread__insert_map(thread, map); + total_mmap++; + + return 0; +} + +static int +process_comm_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->comm.pid); + + dprintf("%p [%p]: PERF_EVENT_COMM: %s:%d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->comm.comm, event->comm.pid); + + if (thread == NULL || + thread__set_comm(thread, event->comm.comm)) { + dprintf("problem processing PERF_EVENT_COMM, skipping event.\n"); + return -1; + } + total_comm++; + + return 0; +} + +static int +process_fork_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->fork.pid); + struct thread *parent = threads__findnew(event->fork.ppid); + + dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->fork.pid, event->fork.ppid); + + if (!thread || !parent || thread__fork(thread, parent)) { + dprintf("problem processing PERF_EVENT_FORK, skipping event.\n"); + return -1; + } + total_fork++; + + return 0; +} + +static int +process_period_event(event_t *event, unsigned long offset, unsigned long head) +{ + dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->period.time, + event->period.id, + event->period.sample_period); + + return 0; +} + +static int +process_event(event_t *event, unsigned long offset, unsigned long head) +{ + if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) + return process_overflow_event(event, offset, head); + + switch (event->header.type) { + case PERF_EVENT_MMAP: + return process_mmap_event(event, offset, head); + + case PERF_EVENT_COMM: + return process_comm_event(event, offset, head); + + case PERF_EVENT_FORK: + return process_fork_event(event, offset, head); + + case PERF_EVENT_PERIOD: + return process_period_event(event, offset, head); + /* + * We dont process them right now but they are fine: + */ + + case PERF_EVENT_THROTTLE: + case PERF_EVENT_UNTHROTTLE: + return 0; + + default: + return -1; + } + + return 0; +} + +static int __cmd_report(void) +{ + int ret, rc = EXIT_FAILURE; + unsigned long offset = 0; + unsigned long head = 0; + struct stat stat; + event_t *event; + uint32_t size; + char *buf; + + register_idle_thread(); + + input = open(input_name, O_RDONLY); + if (input < 0) { + fprintf(stderr, " failed to open file: %s", input_name); + if (!strcmp(input_name, "perf.data")) + fprintf(stderr, " (try 'perf record' first)"); + fprintf(stderr, "\n"); + exit(-1); + } + + ret = fstat(input, &stat); + if (ret < 0) { + perror("failed to stat file"); + exit(-1); + } + + if (!stat.st_size) { + fprintf(stderr, "zero-sized file, nothing to do!\n"); + exit(0); + } + + if (load_kernel() < 0) { + perror("failed to load kernel symbols"); + return EXIT_FAILURE; + } + + if (!full_paths) { + if (getcwd(__cwd, sizeof(__cwd)) == NULL) { + perror("failed to get the current directory"); + return EXIT_FAILURE; + } + cwdlen = strlen(cwd); + } else { + cwd = NULL; + cwdlen = 0; + } +remap: + buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ, + MAP_SHARED, input, offset); + if (buf == MAP_FAILED) { + perror("failed to mmap file"); + exit(-1); + } + +more: + event = (event_t *)(buf + head); + + size = event->header.size; + if (!size) + size = 8; + + if (head + event->header.size >= page_size * mmap_window) { + unsigned long shift = page_size * (head / page_size); + int ret; + + ret = munmap(buf, page_size * mmap_window); + assert(ret == 0); + + offset += shift; + head -= shift; + goto remap; + } + + size = event->header.size; + + dprintf("%p [%p]: event: %d\n", + (void *)(offset + head), + (void *)(long)event->header.size, + event->header.type); + + if (!size || process_event(event, offset, head) < 0) { + + dprintf("%p [%p]: skipping unknown header type: %d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->header.type); + + total_unknown++; + + /* + * assume we lost track of the stream, check alignment, and + * increment a single u64 in the hope to catch on again 'soon'. + */ + + if (unlikely(head & 7)) + head &= ~7ULL; + + size = 8; + } + + head += size; + + if (offset + head < stat.st_size) + goto more; + + rc = EXIT_SUCCESS; + close(input); + + dprintf(" IP events: %10ld\n", total); + dprintf(" mmap events: %10ld\n", total_mmap); + dprintf(" comm events: %10ld\n", total_comm); + dprintf(" fork events: %10ld\n", total_fork); + dprintf(" unknown events: %10ld\n", total_unknown); + + if (dump_trace) + return 0; + + if (verbose >= 3) + threads__fprintf(stdout); + + if (verbose >= 2) + dsos__fprintf(stdout); + + collapse__resort(); + output__resort(); + output__fprintf(stdout, total); + + return rc; +} + +static const char * const report_usage[] = { + "perf report [] ", + NULL +}; + +static const struct option options[] = { + OPT_STRING('i', "input", &input_name, "file", + "input file name"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show symbol address, etc)"), + OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace, + "dump raw trace in ASCII"), + OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"), + OPT_STRING('s', "sort", &sort_order, "key[,key2...]", + "sort by key(s): pid, comm, dso, symbol. Default: pid,symbol"), + OPT_BOOLEAN('P', "full-paths", &full_paths, + "Don't shorten the pathnames taking into account the cwd"), + OPT_END() +}; + +static void setup_sorting(void) +{ + char *tmp, *tok, *str = strdup(sort_order); + + for (tok = strtok_r(str, ", ", &tmp); + tok; tok = strtok_r(NULL, ", ", &tmp)) { + if (sort_dimension__add(tok) < 0) { + error("Unknown --sort key: `%s'", tok); + usage_with_options(report_usage, options); + } + } + + free(str); +} + +int cmd_report(int argc, const char **argv, const char *prefix) +{ + symbol__init(); + + page_size = getpagesize(); + + argc = parse_options(argc, argv, options, report_usage, 0); + + setup_sorting(); + + /* + * Any (unrecognized) arguments left? + */ + if (argc) + usage_with_options(report_usage, options); + + setup_pager(); + + return __cmd_report(); +} diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c new file mode 100644 index 0000000..c43e4a9 --- /dev/null +++ b/tools/perf/builtin-stat.c @@ -0,0 +1,367 @@ +/* + * builtin-stat.c + * + * Builtin stat command: Give a precise performance counters summary + * overview about any workload, CPU or specific PID. + * + * Sample output: + + $ perf stat ~/hackbench 10 + Time: 0.104 + + Performance counter stats for '/home/mingo/hackbench': + + 1255.538611 task clock ticks # 10.143 CPU utilization factor + 54011 context switches # 0.043 M/sec + 385 CPU migrations # 0.000 M/sec + 17755 pagefaults # 0.014 M/sec + 3808323185 CPU cycles # 3033.219 M/sec + 1575111190 instructions # 1254.530 M/sec + 17367895 cache references # 13.833 M/sec + 7674421 cache misses # 6.112 M/sec + + Wall-clock time elapsed: 123.786620 msecs + + * + * Copyright (C) 2008, Red Hat Inc, Ingo Molnar + * + * Improvements and fixes by: + * + * Arjan van de Ven + * Yanmin Zhang + * Wu Fengguang + * Mike Galbraith + * Paul Mackerras + * + * Released under the GPL v2. (and only v2, not any later version) + */ + +#include "perf.h" +#include "builtin.h" +#include "util/util.h" +#include "util/parse-options.h" +#include "util/parse-events.h" + +#include + +static struct perf_counter_attr default_attrs[MAX_COUNTERS] = { + + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES}, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, + + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + +}; + +static int system_wide = 0; +static int inherit = 1; +static int verbose = 0; + +static int fd[MAX_NR_CPUS][MAX_COUNTERS]; + +static int target_pid = -1; +static int nr_cpus = 0; +static unsigned int page_size; + +static int scale = 1; + +static const unsigned int default_count[] = { + 1000000, + 1000000, + 10000, + 10000, + 1000000, + 10000, +}; + +static __u64 event_res[MAX_COUNTERS][3]; +static __u64 event_scaled[MAX_COUNTERS]; + +static __u64 runtime_nsecs; +static __u64 walltime_nsecs; +static __u64 runtime_cycles; + +static void create_perf_stat_counter(int counter) +{ + struct perf_counter_attr *attr = attrs + counter; + + if (scale) + attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | + PERF_FORMAT_TOTAL_TIME_RUNNING; + + if (system_wide) { + int cpu; + for (cpu = 0; cpu < nr_cpus; cpu ++) { + fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0); + if (fd[cpu][counter] < 0 && verbose) { + printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[cpu][counter], strerror(errno)); + } + } + } else { + attr->inherit = inherit; + attr->disabled = 1; + + fd[0][counter] = sys_perf_counter_open(attr, 0, -1, -1, 0); + if (fd[0][counter] < 0 && verbose) { + printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[0][counter], strerror(errno)); + } + } +} + +/* + * Does the counter have nsecs as a unit? + */ +static inline int nsec_counter(int counter) +{ + if (attrs[counter].type != PERF_TYPE_SOFTWARE) + return 0; + + if (attrs[counter].config == PERF_COUNT_SW_CPU_CLOCK) + return 1; + + if (attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) + return 1; + + return 0; +} + +/* + * Read out the results of a single counter: + */ +static void read_counter(int counter) +{ + __u64 *count, single_count[3]; + ssize_t res; + int cpu, nv; + int scaled; + + count = event_res[counter]; + + count[0] = count[1] = count[2] = 0; + + nv = scale ? 3 : 1; + for (cpu = 0; cpu < nr_cpus; cpu ++) { + if (fd[cpu][counter] < 0) + continue; + + res = read(fd[cpu][counter], single_count, nv * sizeof(__u64)); + assert(res == nv * sizeof(__u64)); + + count[0] += single_count[0]; + if (scale) { + count[1] += single_count[1]; + count[2] += single_count[2]; + } + } + + scaled = 0; + if (scale) { + if (count[2] == 0) { + event_scaled[counter] = -1; + count[0] = 0; + return; + } + + if (count[2] < count[1]) { + event_scaled[counter] = 1; + count[0] = (unsigned long long) + ((double)count[0] * count[1] / count[2] + 0.5); + } + } + /* + * Save the full runtime - to allow normalization during printout: + */ + if (attrs[counter].type == PERF_TYPE_SOFTWARE && + attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) + runtime_nsecs = count[0]; + if (attrs[counter].type == PERF_TYPE_HARDWARE && + attrs[counter].config == PERF_COUNT_HW_CPU_CYCLES) + runtime_cycles = count[0]; +} + +/* + * Print out the results of a single counter: + */ +static void print_counter(int counter) +{ + __u64 *count; + int scaled; + + count = event_res[counter]; + scaled = event_scaled[counter]; + + if (scaled == -1) { + fprintf(stderr, " %14s %-20s\n", + "", event_name(counter)); + return; + } + + if (nsec_counter(counter)) { + double msecs = (double)count[0] / 1000000; + + fprintf(stderr, " %14.6f %-20s", + msecs, event_name(counter)); + if (attrs[counter].type == PERF_TYPE_SOFTWARE && + attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) { + + if (walltime_nsecs) + fprintf(stderr, " # %11.3f CPU utilization factor", + (double)count[0] / (double)walltime_nsecs); + } + } else { + fprintf(stderr, " %14Ld %-20s", + count[0], event_name(counter)); + if (runtime_nsecs) + fprintf(stderr, " # %11.3f M/sec", + (double)count[0]/runtime_nsecs*1000.0); + if (runtime_cycles && + attrs[counter].type == PERF_TYPE_HARDWARE && + attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) { + + fprintf(stderr, " # %1.3f per cycle", + (double)count[0] / (double)runtime_cycles); + } + } + if (scaled) + fprintf(stderr, " (scaled from %.2f%%)", + (double) count[2] / count[1] * 100); + fprintf(stderr, "\n"); +} + +static int do_perf_stat(int argc, const char **argv) +{ + unsigned long long t0, t1; + int counter; + int status; + int pid; + int i; + + if (!system_wide) + nr_cpus = 1; + + for (counter = 0; counter < nr_counters; counter++) + create_perf_stat_counter(counter); + + /* + * Enable counters and exec the command: + */ + t0 = rdclock(); + prctl(PR_TASK_PERF_COUNTERS_ENABLE); + + if ((pid = fork()) < 0) + perror("failed to fork"); + + if (!pid) { + if (execvp(argv[0], (char **)argv)) { + perror(argv[0]); + exit(-1); + } + } + + while (wait(&status) >= 0) + ; + + prctl(PR_TASK_PERF_COUNTERS_DISABLE); + t1 = rdclock(); + + walltime_nsecs = t1 - t0; + + fflush(stdout); + + fprintf(stderr, "\n"); + fprintf(stderr, " Performance counter stats for \'%s", argv[0]); + + for (i = 1; i < argc; i++) + fprintf(stderr, " %s", argv[i]); + + fprintf(stderr, "\':\n"); + fprintf(stderr, "\n"); + + for (counter = 0; counter < nr_counters; counter++) + read_counter(counter); + + for (counter = 0; counter < nr_counters; counter++) + print_counter(counter); + + + fprintf(stderr, "\n"); + fprintf(stderr, " Wall-clock time elapsed: %12.6f msecs\n", + (double)(t1-t0)/1e6); + fprintf(stderr, "\n"); + + return 0; +} + +static volatile int signr = -1; + +static void skip_signal(int signo) +{ + signr = signo; +} + +static void sig_atexit(void) +{ + if (signr == -1) + return; + + signal(signr, SIG_DFL); + kill(getpid(), signr); +} + +static const char * const stat_usage[] = { + "perf stat [] ", + NULL +}; + +static const struct option options[] = { + OPT_CALLBACK('e', "event", NULL, "event", + "event selector. use 'perf list' to list available events", + parse_events), + OPT_BOOLEAN('i', "inherit", &inherit, + "child tasks inherit counters"), + OPT_INTEGER('p', "pid", &target_pid, + "stat events on existing pid"), + OPT_BOOLEAN('a', "all-cpus", &system_wide, + "system-wide collection from all CPUs"), + OPT_BOOLEAN('S', "scale", &scale, + "scale/normalize counters"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show counter open errors, etc)"), + OPT_END() +}; + +int cmd_stat(int argc, const char **argv, const char *prefix) +{ + page_size = sysconf(_SC_PAGE_SIZE); + + memcpy(attrs, default_attrs, sizeof(attrs)); + + argc = parse_options(argc, argv, options, stat_usage, 0); + if (!argc) + usage_with_options(stat_usage, options); + + if (!nr_counters) + nr_counters = 8; + + nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); + assert(nr_cpus <= MAX_NR_CPUS); + assert(nr_cpus >= 0); + + /* + * We dont want to block the signals - that would cause + * child tasks to inherit that and Ctrl-C would not work. + * What we want is for Ctrl-C to work in the exec()-ed + * task, but being ignored by perf stat itself: + */ + atexit(sig_atexit); + signal(SIGINT, skip_signal); + signal(SIGALRM, skip_signal); + signal(SIGABRT, skip_signal); + + return do_perf_stat(argc, argv); +} diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c new file mode 100644 index 0000000..fe338d3 --- /dev/null +++ b/tools/perf/builtin-top.c @@ -0,0 +1,736 @@ +/* + * builtin-top.c + * + * Builtin top command: Display a continuously updated profile of + * any workload, CPU or specific PID. + * + * Copyright (C) 2008, Red Hat Inc, Ingo Molnar + * + * Improvements and fixes by: + * + * Arjan van de Ven + * Yanmin Zhang + * Wu Fengguang + * Mike Galbraith + * Paul Mackerras + * + * Released under the GPL v2. (and only v2, not any later version) + */ +#include "builtin.h" + +#include "perf.h" + +#include "util/symbol.h" +#include "util/color.h" +#include "util/util.h" +#include "util/rbtree.h" +#include "util/parse-options.h" +#include "util/parse-events.h" + +#include +#include + +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static int fd[MAX_NR_CPUS][MAX_COUNTERS]; + +static int system_wide = 0; + +static int default_interval = 100000; + +static __u64 count_filter = 5; +static int print_entries = 15; + +static int target_pid = -1; +static int profile_cpu = -1; +static int nr_cpus = 0; +static unsigned int realtime_prio = 0; +static int group = 0; +static unsigned int page_size; +static unsigned int mmap_pages = 16; +static int freq = 0; +static int verbose = 0; + +static char *sym_filter; +static unsigned long filter_start; +static unsigned long filter_end; + +static int delay_secs = 2; +static int zero; +static int dump_symtab; + +/* + * Symbols + */ + +static __u64 min_ip; +static __u64 max_ip = -1ll; + +struct sym_entry { + struct rb_node rb_node; + struct list_head node; + unsigned long count[MAX_COUNTERS]; + unsigned long snap_count; + double weight; + int skip; +}; + +struct sym_entry *sym_filter_entry; + +struct dso *kernel_dso; + +/* + * Symbols will be added here in record_ip and will get out + * after decayed. + */ +static LIST_HEAD(active_symbols); +static pthread_mutex_t active_symbols_lock = PTHREAD_MUTEX_INITIALIZER; + +/* + * Ordering weight: count-1 * count-2 * ... / count-n + */ +static double sym_weight(const struct sym_entry *sym) +{ + double weight = sym->snap_count; + int counter; + + for (counter = 1; counter < nr_counters-1; counter++) + weight *= sym->count[counter]; + + weight /= (sym->count[counter] + 1); + + return weight; +} + +static long samples; +static long userspace_samples; +static const char CONSOLE_CLEAR[] = ""; + +static void __list_insert_active_sym(struct sym_entry *syme) +{ + list_add(&syme->node, &active_symbols); +} + +static void list_remove_active_sym(struct sym_entry *syme) +{ + pthread_mutex_lock(&active_symbols_lock); + list_del_init(&syme->node); + pthread_mutex_unlock(&active_symbols_lock); +} + +static void rb_insert_active_sym(struct rb_root *tree, struct sym_entry *se) +{ + struct rb_node **p = &tree->rb_node; + struct rb_node *parent = NULL; + struct sym_entry *iter; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct sym_entry, rb_node); + + if (se->weight > iter->weight) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&se->rb_node, parent, p); + rb_insert_color(&se->rb_node, tree); +} + +static void print_sym_table(void) +{ + int printed = 0, j; + int counter; + float samples_per_sec = samples/delay_secs; + float ksamples_per_sec = (samples-userspace_samples)/delay_secs; + float sum_ksamples = 0.0; + struct sym_entry *syme, *n; + struct rb_root tmp = RB_ROOT; + struct rb_node *nd; + + samples = userspace_samples = 0; + + /* Sort the active symbols */ + pthread_mutex_lock(&active_symbols_lock); + syme = list_entry(active_symbols.next, struct sym_entry, node); + pthread_mutex_unlock(&active_symbols_lock); + + list_for_each_entry_safe_from(syme, n, &active_symbols, node) { + syme->snap_count = syme->count[0]; + if (syme->snap_count != 0) { + syme->weight = sym_weight(syme); + rb_insert_active_sym(&tmp, syme); + sum_ksamples += syme->snap_count; + + for (j = 0; j < nr_counters; j++) + syme->count[j] = zero ? 0 : syme->count[j] * 7 / 8; + } else + list_remove_active_sym(syme); + } + + puts(CONSOLE_CLEAR); + + printf( +"------------------------------------------------------------------------------\n"); + printf( " PerfTop:%8.0f irqs/sec kernel:%4.1f%% [", + samples_per_sec, + 100.0 - (100.0*((samples_per_sec-ksamples_per_sec)/samples_per_sec))); + + if (nr_counters == 1) { + printf("%Ld", attrs[0].sample_period); + if (freq) + printf("Hz "); + else + printf(" "); + } + + for (counter = 0; counter < nr_counters; counter++) { + if (counter) + printf("/"); + + printf("%s", event_name(counter)); + } + + printf( "], "); + + if (target_pid != -1) + printf(" (target_pid: %d", target_pid); + else + printf(" (all"); + + if (profile_cpu != -1) + printf(", cpu: %d)\n", profile_cpu); + else { + if (target_pid != -1) + printf(")\n"); + else + printf(", %d CPUs)\n", nr_cpus); + } + + printf("------------------------------------------------------------------------------\n\n"); + + if (nr_counters == 1) + printf(" samples pcnt"); + else + printf(" weight samples pcnt"); + + printf(" RIP kernel function\n" + " ______ _______ _____ ________________ _______________\n\n" + ); + + for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) { + struct sym_entry *syme = rb_entry(nd, struct sym_entry, rb_node); + struct symbol *sym = (struct symbol *)(syme + 1); + char *color = PERF_COLOR_NORMAL; + double pcnt; + + if (++printed > print_entries || syme->snap_count < count_filter) + continue; + + pcnt = 100.0 - (100.0 * ((sum_ksamples - syme->snap_count) / + sum_ksamples)); + + /* + * We color high-overhead entries in red, mid-overhead + * entries in green - and keep the low overhead places + * normal: + */ + if (pcnt >= 5.0) { + color = PERF_COLOR_RED; + } else { + if (pcnt >= 0.5) + color = PERF_COLOR_GREEN; + } + + if (nr_counters == 1) + printf("%20.2f - ", syme->weight); + else + printf("%9.1f %10ld - ", syme->weight, syme->snap_count); + + color_fprintf(stdout, color, "%4.1f%%", pcnt); + printf(" - %016llx : %s\n", sym->start, sym->name); + } +} + +static void *display_thread(void *arg) +{ + struct pollfd stdin_poll = { .fd = 0, .events = POLLIN }; + int delay_msecs = delay_secs * 1000; + + printf("PerfTop refresh period: %d seconds\n", delay_secs); + + do { + print_sym_table(); + } while (!poll(&stdin_poll, 1, delay_msecs) == 1); + + printf("key pressed - exiting.\n"); + exit(0); + + return NULL; +} + +static int symbol_filter(struct dso *self, struct symbol *sym) +{ + static int filter_match; + struct sym_entry *syme; + const char *name = sym->name; + + if (!strcmp(name, "_text") || + !strcmp(name, "_etext") || + !strcmp(name, "_sinittext") || + !strncmp("init_module", name, 11) || + !strncmp("cleanup_module", name, 14) || + strstr(name, "_text_start") || + strstr(name, "_text_end")) + return 1; + + syme = dso__sym_priv(self, sym); + /* Tag samples to be skipped. */ + if (!strcmp("default_idle", name) || + !strcmp("cpu_idle", name) || + !strcmp("enter_idle", name) || + !strcmp("exit_idle", name) || + !strcmp("mwait_idle", name)) + syme->skip = 1; + + if (filter_match == 1) { + filter_end = sym->start; + filter_match = -1; + if (filter_end - filter_start > 10000) { + fprintf(stderr, + "hm, too large filter symbol <%s> - skipping.\n", + sym_filter); + fprintf(stderr, "symbol filter start: %016lx\n", + filter_start); + fprintf(stderr, " end: %016lx\n", + filter_end); + filter_end = filter_start = 0; + sym_filter = NULL; + sleep(1); + } + } + + if (filter_match == 0 && sym_filter && !strcmp(name, sym_filter)) { + filter_match = 1; + filter_start = sym->start; + } + + + return 0; +} + +static int parse_symbols(void) +{ + struct rb_node *node; + struct symbol *sym; + + kernel_dso = dso__new("[kernel]", sizeof(struct sym_entry)); + if (kernel_dso == NULL) + return -1; + + if (dso__load_kernel(kernel_dso, NULL, symbol_filter, 1) != 0) + goto out_delete_dso; + + node = rb_first(&kernel_dso->syms); + sym = rb_entry(node, struct symbol, rb_node); + min_ip = sym->start; + + node = rb_last(&kernel_dso->syms); + sym = rb_entry(node, struct symbol, rb_node); + max_ip = sym->end; + + if (dump_symtab) + dso__fprintf(kernel_dso, stderr); + + return 0; + +out_delete_dso: + dso__delete(kernel_dso); + kernel_dso = NULL; + return -1; +} + +#define TRACE_COUNT 3 + +/* + * Binary search in the histogram table and record the hit: + */ +static void record_ip(__u64 ip, int counter) +{ + struct symbol *sym = dso__find_symbol(kernel_dso, ip); + + if (sym != NULL) { + struct sym_entry *syme = dso__sym_priv(kernel_dso, sym); + + if (!syme->skip) { + syme->count[counter]++; + pthread_mutex_lock(&active_symbols_lock); + if (list_empty(&syme->node) || !syme->node.next) + __list_insert_active_sym(syme); + pthread_mutex_unlock(&active_symbols_lock); + return; + } + } + + samples--; +} + +static void process_event(__u64 ip, int counter) +{ + samples++; + + if (ip < min_ip || ip > max_ip) { + userspace_samples++; + return; + } + + record_ip(ip, counter); +} + +struct mmap_data { + int counter; + void *base; + unsigned int mask; + unsigned int prev; +}; + +static unsigned int mmap_read_head(struct mmap_data *md) +{ + struct perf_counter_mmap_page *pc = md->base; + int head; + + head = pc->data_head; + rmb(); + + return head; +} + +struct timeval last_read, this_read; + +static void mmap_read_counter(struct mmap_data *md) +{ + unsigned int head = mmap_read_head(md); + unsigned int old = md->prev; + unsigned char *data = md->base + page_size; + int diff; + + gettimeofday(&this_read, NULL); + + /* + * If we're further behind than half the buffer, there's a chance + * the writer will bite our tail and mess up the samples under us. + * + * If we somehow ended up ahead of the head, we got messed up. + * + * In either case, truncate and restart at head. + */ + diff = head - old; + if (diff > md->mask / 2 || diff < 0) { + struct timeval iv; + unsigned long msecs; + + timersub(&this_read, &last_read, &iv); + msecs = iv.tv_sec*1000 + iv.tv_usec/1000; + + fprintf(stderr, "WARNING: failed to keep up with mmap data." + " Last read %lu msecs ago.\n", msecs); + + /* + * head points to a known good entry, start there. + */ + old = head; + } + + last_read = this_read; + + for (; old != head;) { + struct ip_event { + struct perf_event_header header; + __u64 ip; + __u32 pid, target_pid; + }; + struct mmap_event { + struct perf_event_header header; + __u32 pid, target_pid; + __u64 start; + __u64 len; + __u64 pgoff; + char filename[PATH_MAX]; + }; + + typedef union event_union { + struct perf_event_header header; + struct ip_event ip; + struct mmap_event mmap; + } event_t; + + event_t *event = (event_t *)&data[old & md->mask]; + + event_t event_copy; + + size_t size = event->header.size; + + /* + * Event straddles the mmap boundary -- header should always + * be inside due to u64 alignment of output. + */ + if ((old & md->mask) + size != ((old + size) & md->mask)) { + unsigned int offset = old; + unsigned int len = min(sizeof(*event), size), cpy; + void *dst = &event_copy; + + do { + cpy = min(md->mask + 1 - (offset & md->mask), len); + memcpy(dst, &data[offset & md->mask], cpy); + offset += cpy; + dst += cpy; + len -= cpy; + } while (len); + + event = &event_copy; + } + + old += size; + + if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) { + if (event->header.type & PERF_SAMPLE_IP) + process_event(event->ip.ip, md->counter); + } + } + + md->prev = old; +} + +static struct pollfd event_array[MAX_NR_CPUS * MAX_COUNTERS]; +static struct mmap_data mmap_array[MAX_NR_CPUS][MAX_COUNTERS]; + +static void mmap_read(void) +{ + int i, counter; + + for (i = 0; i < nr_cpus; i++) { + for (counter = 0; counter < nr_counters; counter++) + mmap_read_counter(&mmap_array[i][counter]); + } +} + +int nr_poll; +int group_fd; + +static void start_counter(int i, int counter) +{ + struct perf_counter_attr *attr; + unsigned int cpu; + + cpu = profile_cpu; + if (target_pid == -1 && profile_cpu == -1) + cpu = i; + + attr = attrs + counter; + + attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID; + attr->freq = freq; + +try_again: + fd[i][counter] = sys_perf_counter_open(attr, target_pid, cpu, group_fd, 0); + + if (fd[i][counter] < 0) { + int err = errno; + + if (err == EPERM) + die("No permission - are you root?\n"); + /* + * If it's cycles then fall back to hrtimer + * based cpu-clock-tick sw counter, which + * is always available even if no PMU support: + */ + if (attr->type == PERF_TYPE_HARDWARE + && attr->config == PERF_COUNT_HW_CPU_CYCLES) { + + if (verbose) + warning(" ... trying to fall back to cpu-clock-ticks\n"); + + attr->type = PERF_TYPE_SOFTWARE; + attr->config = PERF_COUNT_SW_CPU_CLOCK; + goto try_again; + } + printf("\n"); + error("perfcounter syscall returned with %d (%s)\n", + fd[i][counter], strerror(err)); + die("No CONFIG_PERF_COUNTERS=y kernel support configured?\n"); + exit(-1); + } + assert(fd[i][counter] >= 0); + fcntl(fd[i][counter], F_SETFL, O_NONBLOCK); + + /* + * First counter acts as the group leader: + */ + if (group && group_fd == -1) + group_fd = fd[i][counter]; + + event_array[nr_poll].fd = fd[i][counter]; + event_array[nr_poll].events = POLLIN; + nr_poll++; + + mmap_array[i][counter].counter = counter; + mmap_array[i][counter].prev = 0; + mmap_array[i][counter].mask = mmap_pages*page_size - 1; + mmap_array[i][counter].base = mmap(NULL, (mmap_pages+1)*page_size, + PROT_READ, MAP_SHARED, fd[i][counter], 0); + if (mmap_array[i][counter].base == MAP_FAILED) + die("failed to mmap with %d (%s)\n", errno, strerror(errno)); +} + +static int __cmd_top(void) +{ + pthread_t thread; + int i, counter; + int ret; + + for (i = 0; i < nr_cpus; i++) { + group_fd = -1; + for (counter = 0; counter < nr_counters; counter++) + start_counter(i, counter); + } + + /* Wait for a minimal set of events before starting the snapshot */ + poll(event_array, nr_poll, 100); + + mmap_read(); + + if (pthread_create(&thread, NULL, display_thread, NULL)) { + printf("Could not create display thread.\n"); + exit(-1); + } + + if (realtime_prio) { + struct sched_param param; + + param.sched_priority = realtime_prio; + if (sched_setscheduler(0, SCHED_FIFO, ¶m)) { + printf("Could not set realtime priority.\n"); + exit(-1); + } + } + + while (1) { + int hits = samples; + + mmap_read(); + + if (hits == samples) + ret = poll(event_array, nr_poll, 100); + } + + return 0; +} + +static const char * const top_usage[] = { + "perf top []", + NULL +}; + +static const struct option options[] = { + OPT_CALLBACK('e', "event", NULL, "event", + "event selector. use 'perf list' to list available events", + parse_events), + OPT_INTEGER('c', "count", &default_interval, + "event period to sample"), + OPT_INTEGER('p', "pid", &target_pid, + "profile events on existing pid"), + OPT_BOOLEAN('a', "all-cpus", &system_wide, + "system-wide collection from all CPUs"), + OPT_INTEGER('C', "CPU", &profile_cpu, + "CPU to profile on"), + OPT_INTEGER('m', "mmap-pages", &mmap_pages, + "number of mmap data pages"), + OPT_INTEGER('r', "realtime", &realtime_prio, + "collect data with this RT SCHED_FIFO priority"), + OPT_INTEGER('d', "delay", &delay_secs, + "number of seconds to delay between refreshes"), + OPT_BOOLEAN('D', "dump-symtab", &dump_symtab, + "dump the symbol table used for profiling"), + OPT_INTEGER('f', "count-filter", &count_filter, + "only display functions with more events than this"), + OPT_BOOLEAN('g', "group", &group, + "put the counters into a counter group"), + OPT_STRING('s', "sym-filter", &sym_filter, "pattern", + "only display symbols matchig this pattern"), + OPT_BOOLEAN('z', "zero", &group, + "zero history across updates"), + OPT_INTEGER('F', "freq", &freq, + "profile at this frequency"), + OPT_INTEGER('E', "entries", &print_entries, + "display this many functions"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show counter open errors, etc)"), + OPT_END() +}; + +int cmd_top(int argc, const char **argv, const char *prefix) +{ + int counter; + + page_size = sysconf(_SC_PAGE_SIZE); + + argc = parse_options(argc, argv, options, top_usage, 0); + if (argc) + usage_with_options(top_usage, options); + + if (freq) { + default_interval = freq; + freq = 1; + } + + /* CPU and PID are mutually exclusive */ + if (target_pid != -1 && profile_cpu != -1) { + printf("WARNING: PID switch overriding CPU\n"); + sleep(1); + profile_cpu = -1; + } + + if (!nr_counters) + nr_counters = 1; + + if (delay_secs < 1) + delay_secs = 1; + + parse_symbols(); + + /* + * Fill in the ones not specifically initialized via -c: + */ + for (counter = 0; counter < nr_counters; counter++) { + if (attrs[counter].sample_period) + continue; + + attrs[counter].sample_period = default_interval; + } + + nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); + assert(nr_cpus <= MAX_NR_CPUS); + assert(nr_cpus >= 0); + + if (target_pid != -1 || profile_cpu != -1) + nr_cpus = 1; + + return __cmd_top(); +} diff --git a/tools/perf/builtin.h b/tools/perf/builtin.h new file mode 100644 index 0000000..51d1682 --- /dev/null +++ b/tools/perf/builtin.h @@ -0,0 +1,26 @@ +#ifndef BUILTIN_H +#define BUILTIN_H + +#include "util/util.h" +#include "util/strbuf.h" + +extern const char perf_version_string[]; +extern const char perf_usage_string[]; +extern const char perf_more_info_string[]; + +extern void list_common_cmds_help(void); +extern const char *help_unknown_cmd(const char *cmd); +extern void prune_packed_objects(int); +extern int read_line_with_nul(char *buf, int size, FILE *file); +extern int check_pager_config(const char *cmd); + +extern int cmd_annotate(int argc, const char **argv, const char *prefix); +extern int cmd_help(int argc, const char **argv, const char *prefix); +extern int cmd_record(int argc, const char **argv, const char *prefix); +extern int cmd_report(int argc, const char **argv, const char *prefix); +extern int cmd_stat(int argc, const char **argv, const char *prefix); +extern int cmd_top(int argc, const char **argv, const char *prefix); +extern int cmd_version(int argc, const char **argv, const char *prefix); +extern int cmd_list(int argc, const char **argv, const char *prefix); + +#endif diff --git a/tools/perf/command-list.txt b/tools/perf/command-list.txt new file mode 100644 index 0000000..eebce30 --- /dev/null +++ b/tools/perf/command-list.txt @@ -0,0 +1,10 @@ +# +# List of known perf commands. +# command name category [deprecated] [common] +# +perf-annotate mainporcelain common +perf-list mainporcelain common +perf-record mainporcelain common +perf-report mainporcelain common +perf-stat mainporcelain common +perf-top mainporcelain common diff --git a/tools/perf/design.txt b/tools/perf/design.txt new file mode 100644 index 0000000..f71e0d2 --- /dev/null +++ b/tools/perf/design.txt @@ -0,0 +1,457 @@ + +Performance Counters for Linux +------------------------------ + +Performance counters are special hardware registers available on most modern +CPUs. These registers count the number of certain types of hw events: such +as instructions executed, cachemisses suffered, or branches mis-predicted - +without slowing down the kernel or applications. These registers can also +trigger interrupts when a threshold number of events have passed - and can +thus be used to profile the code that runs on that CPU. + +The Linux Performance Counter subsystem provides an abstraction of these +hardware capabilities. It provides per task and per CPU counters, counter +groups, and it provides event capabilities on top of those. It +provides "virtual" 64-bit counters, regardless of the width of the +underlying hardware counters. + +Performance counters are accessed via special file descriptors. +There's one file descriptor per virtual counter used. + +The special file descriptor is opened via the perf_counter_open() +system call: + + int sys_perf_counter_open(struct perf_counter_hw_event *hw_event_uptr, + pid_t pid, int cpu, int group_fd, + unsigned long flags); + +The syscall returns the new fd. The fd can be used via the normal +VFS system calls: read() can be used to read the counter, fcntl() +can be used to set the blocking mode, etc. + +Multiple counters can be kept open at a time, and the counters +can be poll()ed. + +When creating a new counter fd, 'perf_counter_hw_event' is: + +struct perf_counter_hw_event { + /* + * The MSB of the config word signifies if the rest contains cpu + * specific (raw) counter configuration data, if unset, the next + * 7 bits are an event type and the rest of the bits are the event + * identifier. + */ + __u64 config; + + __u64 irq_period; + __u32 record_type; + __u32 read_format; + + __u64 disabled : 1, /* off by default */ + inherit : 1, /* children inherit it */ + pinned : 1, /* must always be on PMU */ + exclusive : 1, /* only group on PMU */ + exclude_user : 1, /* don't count user */ + exclude_kernel : 1, /* ditto kernel */ + exclude_hv : 1, /* ditto hypervisor */ + exclude_idle : 1, /* don't count when idle */ + mmap : 1, /* include mmap data */ + munmap : 1, /* include munmap data */ + comm : 1, /* include comm data */ + + __reserved_1 : 52; + + __u32 extra_config_len; + __u32 wakeup_events; /* wakeup every n events */ + + __u64 __reserved_2; + __u64 __reserved_3; +}; + +The 'config' field specifies what the counter should count. It +is divided into 3 bit-fields: + +raw_type: 1 bit (most significant bit) 0x8000_0000_0000_0000 +type: 7 bits (next most significant) 0x7f00_0000_0000_0000 +event_id: 56 bits (least significant) 0x00ff_ffff_ffff_ffff + +If 'raw_type' is 1, then the counter will count a hardware event +specified by the remaining 63 bits of event_config. The encoding is +machine-specific. + +If 'raw_type' is 0, then the 'type' field says what kind of counter +this is, with the following encoding: + +enum perf_event_types { + PERF_TYPE_HARDWARE = 0, + PERF_TYPE_SOFTWARE = 1, + PERF_TYPE_TRACEPOINT = 2, +}; + +A counter of PERF_TYPE_HARDWARE will count the hardware event +specified by 'event_id': + +/* + * Generalized performance counter event types, used by the hw_event.event_id + * parameter of the sys_perf_counter_open() syscall: + */ +enum hw_event_ids { + /* + * Common hardware events, generalized by the kernel: + */ + PERF_COUNT_HW_CPU_CYCLES = 0, + PERF_COUNT_HW_INSTRUCTIONS = 1, + PERF_COUNT_HW_CACHE_REFERENCES = 2, + PERF_COUNT_HW_CACHE_MISSES = 3, + PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, + PERF_COUNT_HW_BRANCH_MISSES = 5, + PERF_COUNT_HW_BUS_CYCLES = 6, +}; + +These are standardized types of events that work relatively uniformly +on all CPUs that implement Performance Counters support under Linux, +although there may be variations (e.g., different CPUs might count +cache references and misses at different levels of the cache hierarchy). +If a CPU is not able to count the selected event, then the system call +will return -EINVAL. + +More hw_event_types are supported as well, but they are CPU-specific +and accessed as raw events. For example, to count "External bus +cycles while bus lock signal asserted" events on Intel Core CPUs, pass +in a 0x4064 event_id value and set hw_event.raw_type to 1. + +A counter of type PERF_TYPE_SOFTWARE will count one of the available +software events, selected by 'event_id': + +/* + * Special "software" counters provided by the kernel, even if the hardware + * does not support performance counters. These counters measure various + * physical and sw events of the kernel (and allow the profiling of them as + * well): + */ +enum sw_event_ids { + PERF_COUNT_SW_CPU_CLOCK = 0, + PERF_COUNT_SW_TASK_CLOCK = 1, + PERF_COUNT_SW_PAGE_FAULTS = 2, + PERF_COUNT_SW_CONTEXT_SWITCHES = 3, + PERF_COUNT_SW_CPU_MIGRATIONS = 4, + PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, + PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, +}; + +Counters of the type PERF_TYPE_TRACEPOINT are available when the ftrace event +tracer is available, and event_id values can be obtained from +/debug/tracing/events/*/*/id + + +Counters come in two flavours: counting counters and sampling +counters. A "counting" counter is one that is used for counting the +number of events that occur, and is characterised by having +irq_period = 0. + + +A read() on a counter returns the current value of the counter and possible +additional values as specified by 'read_format', each value is a u64 (8 bytes) +in size. + +/* + * Bits that can be set in hw_event.read_format to request that + * reads on the counter should return the indicated quantities, + * in increasing order of bit value, after the counter value. + */ +enum perf_counter_read_format { + PERF_FORMAT_TOTAL_TIME_ENABLED = 1, + PERF_FORMAT_TOTAL_TIME_RUNNING = 2, +}; + +Using these additional values one can establish the overcommit ratio for a +particular counter allowing one to take the round-robin scheduling effect +into account. + + +A "sampling" counter is one that is set up to generate an interrupt +every N events, where N is given by 'irq_period'. A sampling counter +has irq_period > 0. The record_type controls what data is recorded on each +interrupt: + +/* + * Bits that can be set in hw_event.record_type to request information + * in the overflow packets. + */ +enum perf_counter_record_format { + PERF_RECORD_IP = 1U << 0, + PERF_RECORD_TID = 1U << 1, + PERF_RECORD_TIME = 1U << 2, + PERF_RECORD_ADDR = 1U << 3, + PERF_RECORD_GROUP = 1U << 4, + PERF_RECORD_CALLCHAIN = 1U << 5, +}; + +Such (and other) events will be recorded in a ring-buffer, which is +available to user-space using mmap() (see below). + +The 'disabled' bit specifies whether the counter starts out disabled +or enabled. If it is initially disabled, it can be enabled by ioctl +or prctl (see below). + +The 'inherit' bit, if set, specifies that this counter should count +events on descendant tasks as well as the task specified. This only +applies to new descendents, not to any existing descendents at the +time the counter is created (nor to any new descendents of existing +descendents). + +The 'pinned' bit, if set, specifies that the counter should always be +on the CPU if at all possible. It only applies to hardware counters +and only to group leaders. If a pinned counter cannot be put onto the +CPU (e.g. because there are not enough hardware counters or because of +a conflict with some other event), then the counter goes into an +'error' state, where reads return end-of-file (i.e. read() returns 0) +until the counter is subsequently enabled or disabled. + +The 'exclusive' bit, if set, specifies that when this counter's group +is on the CPU, it should be the only group using the CPU's counters. +In future, this will allow sophisticated monitoring programs to supply +extra configuration information via 'extra_config_len' to exploit +advanced features of the CPU's Performance Monitor Unit (PMU) that are +not otherwise accessible and that might disrupt other hardware +counters. + +The 'exclude_user', 'exclude_kernel' and 'exclude_hv' bits provide a +way to request that counting of events be restricted to times when the +CPU is in user, kernel and/or hypervisor mode. + +The 'mmap' and 'munmap' bits allow recording of PROT_EXEC mmap/munmap +operations, these can be used to relate userspace IP addresses to actual +code, even after the mapping (or even the whole process) is gone, +these events are recorded in the ring-buffer (see below). + +The 'comm' bit allows tracking of process comm data on process creation. +This too is recorded in the ring-buffer (see below). + +The 'pid' parameter to the perf_counter_open() system call allows the +counter to be specific to a task: + + pid == 0: if the pid parameter is zero, the counter is attached to the + current task. + + pid > 0: the counter is attached to a specific task (if the current task + has sufficient privilege to do so) + + pid < 0: all tasks are counted (per cpu counters) + +The 'cpu' parameter allows a counter to be made specific to a CPU: + + cpu >= 0: the counter is restricted to a specific CPU + cpu == -1: the counter counts on all CPUs + +(Note: the combination of 'pid == -1' and 'cpu == -1' is not valid.) + +A 'pid > 0' and 'cpu == -1' counter is a per task counter that counts +events of that task and 'follows' that task to whatever CPU the task +gets schedule to. Per task counters can be created by any user, for +their own tasks. + +A 'pid == -1' and 'cpu == x' counter is a per CPU counter that counts +all events on CPU-x. Per CPU counters need CAP_SYS_ADMIN privilege. + +The 'flags' parameter is currently unused and must be zero. + +The 'group_fd' parameter allows counter "groups" to be set up. A +counter group has one counter which is the group "leader". The leader +is created first, with group_fd = -1 in the perf_counter_open call +that creates it. The rest of the group members are created +subsequently, with group_fd giving the fd of the group leader. +(A single counter on its own is created with group_fd = -1 and is +considered to be a group with only 1 member.) + +A counter group is scheduled onto the CPU as a unit, that is, it will +only be put onto the CPU if all of the counters in the group can be +put onto the CPU. This means that the values of the member counters +can be meaningfully compared, added, divided (to get ratios), etc., +with each other, since they have counted events for the same set of +executed instructions. + + +Like stated, asynchronous events, like counter overflow or PROT_EXEC mmap +tracking are logged into a ring-buffer. This ring-buffer is created and +accessed through mmap(). + +The mmap size should be 1+2^n pages, where the first page is a meta-data page +(struct perf_counter_mmap_page) that contains various bits of information such +as where the ring-buffer head is. + +/* + * Structure of the page that can be mapped via mmap + */ +struct perf_counter_mmap_page { + __u32 version; /* version number of this structure */ + __u32 compat_version; /* lowest version this is compat with */ + + /* + * Bits needed to read the hw counters in user-space. + * + * u32 seq; + * s64 count; + * + * do { + * seq = pc->lock; + * + * barrier() + * if (pc->index) { + * count = pmc_read(pc->index - 1); + * count += pc->offset; + * } else + * goto regular_read; + * + * barrier(); + * } while (pc->lock != seq); + * + * NOTE: for obvious reason this only works on self-monitoring + * processes. + */ + __u32 lock; /* seqlock for synchronization */ + __u32 index; /* hardware counter identifier */ + __s64 offset; /* add to hardware counter value */ + + /* + * Control data for the mmap() data buffer. + * + * User-space reading this value should issue an rmb(), on SMP capable + * platforms, after reading this value -- see perf_counter_wakeup(). + */ + __u32 data_head; /* head in the data section */ +}; + +NOTE: the hw-counter userspace bits are arch specific and are currently only + implemented on powerpc. + +The following 2^n pages are the ring-buffer which contains events of the form: + +#define PERF_EVENT_MISC_KERNEL (1 << 0) +#define PERF_EVENT_MISC_USER (1 << 1) +#define PERF_EVENT_MISC_OVERFLOW (1 << 2) + +struct perf_event_header { + __u32 type; + __u16 misc; + __u16 size; +}; + +enum perf_event_type { + + /* + * The MMAP events record the PROT_EXEC mappings so that we can + * correlate userspace IPs to code. They have the following structure: + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * char filename[]; + * }; + */ + PERF_EVENT_MMAP = 1, + PERF_EVENT_MUNMAP = 2, + + /* + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * char comm[]; + * }; + */ + PERF_EVENT_COMM = 3, + + /* + * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field + * will be PERF_RECORD_* + * + * struct { + * struct perf_event_header header; + * + * { u64 ip; } && PERF_RECORD_IP + * { u32 pid, tid; } && PERF_RECORD_TID + * { u64 time; } && PERF_RECORD_TIME + * { u64 addr; } && PERF_RECORD_ADDR + * + * { u64 nr; + * { u64 event, val; } cnt[nr]; } && PERF_RECORD_GROUP + * + * { u16 nr, + * hv, + * kernel, + * user; + * u64 ips[nr]; } && PERF_RECORD_CALLCHAIN + * }; + */ +}; + +NOTE: PERF_RECORD_CALLCHAIN is arch specific and currently only implemented + on x86. + +Notification of new events is possible through poll()/select()/epoll() and +fcntl() managing signals. + +Normally a notification is generated for every page filled, however one can +additionally set perf_counter_hw_event.wakeup_events to generate one every +so many counter overflow events. + +Future work will include a splice() interface to the ring-buffer. + + +Counters can be enabled and disabled in two ways: via ioctl and via +prctl. When a counter is disabled, it doesn't count or generate +events but does continue to exist and maintain its count value. + +An individual counter or counter group can be enabled with + + ioctl(fd, PERF_COUNTER_IOC_ENABLE); + +or disabled with + + ioctl(fd, PERF_COUNTER_IOC_DISABLE); + +Enabling or disabling the leader of a group enables or disables the +whole group; that is, while the group leader is disabled, none of the +counters in the group will count. Enabling or disabling a member of a +group other than the leader only affects that counter - disabling an +non-leader stops that counter from counting but doesn't affect any +other counter. + +Additionally, non-inherited overflow counters can use + + ioctl(fd, PERF_COUNTER_IOC_REFRESH, nr); + +to enable a counter for 'nr' events, after which it gets disabled again. + +A process can enable or disable all the counter groups that are +attached to it, using prctl: + + prctl(PR_TASK_PERF_COUNTERS_ENABLE); + + prctl(PR_TASK_PERF_COUNTERS_DISABLE); + +This applies to all counters on the current process, whether created +by this process or by another, and doesn't affect any counters that +this process has created on other processes. It only enables or +disables the group leaders, not any other members in the groups. + + +Arch requirements +----------------- + +If your architecture does not have hardware performance metrics, you can +still use the generic software counters based on hrtimers for sampling. + +So to start with, in order to add HAVE_PERF_COUNTERS to your Kconfig, you +will need at least this: + - asm/perf_counter.h - a basic stub will suffice at first + - support for atomic64 types (and associated helper functions) + - set_perf_counter_pending() implemented + +If your architecture does have hardware capabilities, you can override the +weak stub hw_perf_counter_init() to register hardware counters. diff --git a/tools/perf/perf.c b/tools/perf/perf.c new file mode 100644 index 0000000..4eb7259 --- /dev/null +++ b/tools/perf/perf.c @@ -0,0 +1,428 @@ +/* + * perf.c + * + * Performance analysis utility. + * + * This is the main hub from which the sub-commands (perf stat, + * perf top, perf record, perf report, etc.) are started. + */ +#include "builtin.h" + +#include "util/exec_cmd.h" +#include "util/cache.h" +#include "util/quote.h" +#include "util/run-command.h" + +const char perf_usage_string[] = + "perf [--version] [--help] COMMAND [ARGS]"; + +const char perf_more_info_string[] = + "See 'perf help COMMAND' for more information on a specific command."; + +static int use_pager = -1; +struct pager_config { + const char *cmd; + int val; +}; + +static int pager_command_config(const char *var, const char *value, void *data) +{ + struct pager_config *c = data; + if (!prefixcmp(var, "pager.") && !strcmp(var + 6, c->cmd)) + c->val = perf_config_bool(var, value); + return 0; +} + +/* returns 0 for "no pager", 1 for "use pager", and -1 for "not specified" */ +int check_pager_config(const char *cmd) +{ + struct pager_config c; + c.cmd = cmd; + c.val = -1; + perf_config(pager_command_config, &c); + return c.val; +} + +static void commit_pager_choice(void) { + switch (use_pager) { + case 0: + setenv("PERF_PAGER", "cat", 1); + break; + case 1: + /* setup_pager(); */ + break; + default: + break; + } +} + +static int handle_options(const char*** argv, int* argc, int* envchanged) +{ + int handled = 0; + + while (*argc > 0) { + const char *cmd = (*argv)[0]; + if (cmd[0] != '-') + break; + + /* + * For legacy reasons, the "version" and "help" + * commands can be written with "--" prepended + * to make them look like flags. + */ + if (!strcmp(cmd, "--help") || !strcmp(cmd, "--version")) + break; + + /* + * Check remaining flags. + */ + if (!prefixcmp(cmd, "--exec-path")) { + cmd += 11; + if (*cmd == '=') + perf_set_argv_exec_path(cmd + 1); + else { + puts(perf_exec_path()); + exit(0); + } + } else if (!strcmp(cmd, "--html-path")) { + puts(system_path(PERF_HTML_PATH)); + exit(0); + } else if (!strcmp(cmd, "-p") || !strcmp(cmd, "--paginate")) { + use_pager = 1; + } else if (!strcmp(cmd, "--no-pager")) { + use_pager = 0; + if (envchanged) + *envchanged = 1; + } else if (!strcmp(cmd, "--perf-dir")) { + if (*argc < 2) { + fprintf(stderr, "No directory given for --perf-dir.\n" ); + usage(perf_usage_string); + } + setenv(PERF_DIR_ENVIRONMENT, (*argv)[1], 1); + if (envchanged) + *envchanged = 1; + (*argv)++; + (*argc)--; + handled++; + } else if (!prefixcmp(cmd, "--perf-dir=")) { + setenv(PERF_DIR_ENVIRONMENT, cmd + 10, 1); + if (envchanged) + *envchanged = 1; + } else if (!strcmp(cmd, "--work-tree")) { + if (*argc < 2) { + fprintf(stderr, "No directory given for --work-tree.\n" ); + usage(perf_usage_string); + } + setenv(PERF_WORK_TREE_ENVIRONMENT, (*argv)[1], 1); + if (envchanged) + *envchanged = 1; + (*argv)++; + (*argc)--; + } else if (!prefixcmp(cmd, "--work-tree=")) { + setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1); + if (envchanged) + *envchanged = 1; + } else { + fprintf(stderr, "Unknown option: %s\n", cmd); + usage(perf_usage_string); + } + + (*argv)++; + (*argc)--; + handled++; + } + return handled; +} + +static int handle_alias(int *argcp, const char ***argv) +{ + int envchanged = 0, ret = 0, saved_errno = errno; + int count, option_count; + const char** new_argv; + const char *alias_command; + char *alias_string; + + alias_command = (*argv)[0]; + alias_string = alias_lookup(alias_command); + if (alias_string) { + if (alias_string[0] == '!') { + if (*argcp > 1) { + struct strbuf buf; + + strbuf_init(&buf, PATH_MAX); + strbuf_addstr(&buf, alias_string); + sq_quote_argv(&buf, (*argv) + 1, PATH_MAX); + free(alias_string); + alias_string = buf.buf; + } + ret = system(alias_string + 1); + if (ret >= 0 && WIFEXITED(ret) && + WEXITSTATUS(ret) != 127) + exit(WEXITSTATUS(ret)); + die("Failed to run '%s' when expanding alias '%s'", + alias_string + 1, alias_command); + } + count = split_cmdline(alias_string, &new_argv); + if (count < 0) + die("Bad alias.%s string", alias_command); + option_count = handle_options(&new_argv, &count, &envchanged); + if (envchanged) + die("alias '%s' changes environment variables\n" + "You can use '!perf' in the alias to do this.", + alias_command); + memmove(new_argv - option_count, new_argv, + count * sizeof(char *)); + new_argv -= option_count; + + if (count < 1) + die("empty alias for %s", alias_command); + + if (!strcmp(alias_command, new_argv[0])) + die("recursive alias: %s", alias_command); + + new_argv = realloc(new_argv, sizeof(char*) * + (count + *argcp + 1)); + /* insert after command name */ + memcpy(new_argv + count, *argv + 1, sizeof(char*) * *argcp); + new_argv[count+*argcp] = NULL; + + *argv = new_argv; + *argcp += count - 1; + + ret = 1; + } + + errno = saved_errno; + + return ret; +} + +const char perf_version_string[] = PERF_VERSION; + +#define RUN_SETUP (1<<0) +#define USE_PAGER (1<<1) +/* + * require working tree to be present -- anything uses this needs + * RUN_SETUP for reading from the configuration file. + */ +#define NEED_WORK_TREE (1<<2) + +struct cmd_struct { + const char *cmd; + int (*fn)(int, const char **, const char *); + int option; +}; + +static int run_builtin(struct cmd_struct *p, int argc, const char **argv) +{ + int status; + struct stat st; + const char *prefix; + + prefix = NULL; + if (p->option & RUN_SETUP) + prefix = NULL; /* setup_perf_directory(); */ + + if (use_pager == -1 && p->option & RUN_SETUP) + use_pager = check_pager_config(p->cmd); + if (use_pager == -1 && p->option & USE_PAGER) + use_pager = 1; + commit_pager_choice(); + + if (p->option & NEED_WORK_TREE) + /* setup_work_tree() */; + + status = p->fn(argc, argv, prefix); + if (status) + return status & 0xff; + + /* Somebody closed stdout? */ + if (fstat(fileno(stdout), &st)) + return 0; + /* Ignore write errors for pipes and sockets.. */ + if (S_ISFIFO(st.st_mode) || S_ISSOCK(st.st_mode)) + return 0; + + /* Check for ENOSPC and EIO errors.. */ + if (fflush(stdout)) + die("write failure on standard output: %s", strerror(errno)); + if (ferror(stdout)) + die("unknown write failure on standard output"); + if (fclose(stdout)) + die("close failed on standard output: %s", strerror(errno)); + return 0; +} + +static void handle_internal_command(int argc, const char **argv) +{ + const char *cmd = argv[0]; + static struct cmd_struct commands[] = { + { "help", cmd_help, 0 }, + { "list", cmd_list, 0 }, + { "record", cmd_record, 0 }, + { "report", cmd_report, 0 }, + { "stat", cmd_stat, 0 }, + { "top", cmd_top, 0 }, + { "annotate", cmd_annotate, 0 }, + { "version", cmd_version, 0 }, + }; + int i; + static const char ext[] = STRIP_EXTENSION; + + if (sizeof(ext) > 1) { + i = strlen(argv[0]) - strlen(ext); + if (i > 0 && !strcmp(argv[0] + i, ext)) { + char *argv0 = strdup(argv[0]); + argv[0] = cmd = argv0; + argv0[i] = '\0'; + } + } + + /* Turn "perf cmd --help" into "perf help cmd" */ + if (argc > 1 && !strcmp(argv[1], "--help")) { + argv[1] = argv[0]; + argv[0] = cmd = "help"; + } + + for (i = 0; i < ARRAY_SIZE(commands); i++) { + struct cmd_struct *p = commands+i; + if (strcmp(p->cmd, cmd)) + continue; + exit(run_builtin(p, argc, argv)); + } +} + +static void execv_dashed_external(const char **argv) +{ + struct strbuf cmd = STRBUF_INIT; + const char *tmp; + int status; + + strbuf_addf(&cmd, "perf-%s", argv[0]); + + /* + * argv[0] must be the perf command, but the argv array + * belongs to the caller, and may be reused in + * subsequent loop iterations. Save argv[0] and + * restore it on error. + */ + tmp = argv[0]; + argv[0] = cmd.buf; + + /* + * if we fail because the command is not found, it is + * OK to return. Otherwise, we just pass along the status code. + */ + status = run_command_v_opt(argv, 0); + if (status != -ERR_RUN_COMMAND_EXEC) { + if (IS_RUN_COMMAND_ERR(status)) + die("unable to run '%s'", argv[0]); + exit(-status); + } + errno = ENOENT; /* as if we called execvp */ + + argv[0] = tmp; + + strbuf_release(&cmd); +} + +static int run_argv(int *argcp, const char ***argv) +{ + int done_alias = 0; + + while (1) { + /* See if it's an internal command */ + handle_internal_command(*argcp, *argv); + + /* .. then try the external ones */ + execv_dashed_external(*argv); + + /* It could be an alias -- this works around the insanity + * of overriding "perf log" with "perf show" by having + * alias.log = show + */ + if (done_alias || !handle_alias(argcp, argv)) + break; + done_alias = 1; + } + + return done_alias; +} + + +int main(int argc, const char **argv) +{ + const char *cmd; + + cmd = perf_extract_argv0_path(argv[0]); + if (!cmd) + cmd = "perf-help"; + + /* + * "perf-xxxx" is the same as "perf xxxx", but we obviously: + * + * - cannot take flags in between the "perf" and the "xxxx". + * - cannot execute it externally (since it would just do + * the same thing over again) + * + * So we just directly call the internal command handler, and + * die if that one cannot handle it. + */ + if (!prefixcmp(cmd, "perf-")) { + cmd += 5; + argv[0] = cmd; + handle_internal_command(argc, argv); + die("cannot handle %s internally", cmd); + } + + /* Look for flags.. */ + argv++; + argc--; + handle_options(&argv, &argc, NULL); + commit_pager_choice(); + if (argc > 0) { + if (!prefixcmp(argv[0], "--")) + argv[0] += 2; + } else { + /* The user didn't specify a command; give them help */ + printf("\n usage: %s\n\n", perf_usage_string); + list_common_cmds_help(); + printf("\n %s\n\n", perf_more_info_string); + exit(1); + } + cmd = argv[0]; + + /* + * We use PATH to find perf commands, but we prepend some higher + * precidence paths: the "--exec-path" option, the PERF_EXEC_PATH + * environment, and the $(perfexecdir) from the Makefile at build + * time. + */ + setup_path(); + + while (1) { + static int done_help = 0; + static int was_alias = 0; + + was_alias = run_argv(&argc, &argv); + if (errno != ENOENT) + break; + + if (was_alias) { + fprintf(stderr, "Expansion of alias '%s' failed; " + "'%s' is not a perf-command\n", + cmd, argv[0]); + exit(1); + } + if (!done_help) { + cmd = argv[0] = help_unknown_cmd(cmd); + done_help = 1; + } else + break; + } + + fprintf(stderr, "Failed to run command '%s': %s\n", + cmd, strerror(errno)); + + return 1; +} diff --git a/tools/perf/perf.h b/tools/perf/perf.h new file mode 100644 index 0000000..87a1aca --- /dev/null +++ b/tools/perf/perf.h @@ -0,0 +1,68 @@ +#ifndef _PERF_PERF_H +#define _PERF_PERF_H + +#if defined(__x86_64__) || defined(__i386__) +#include "../../arch/x86/include/asm/unistd.h" +#define rmb() asm volatile("lfence" ::: "memory") +#define cpu_relax() asm volatile("rep; nop" ::: "memory"); +#endif + +#ifdef __powerpc__ +#include "../../arch/powerpc/include/asm/unistd.h" +#define rmb() asm volatile ("sync" ::: "memory") +#define cpu_relax() asm volatile ("" ::: "memory"); +#endif + +#include +#include +#include +#include + +#include "../../include/linux/perf_counter.h" + +/* + * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all + * counters in the current task. + */ +#define PR_TASK_PERF_COUNTERS_DISABLE 31 +#define PR_TASK_PERF_COUNTERS_ENABLE 32 + +#ifndef NSEC_PER_SEC +# define NSEC_PER_SEC 1000000000ULL +#endif + +static inline unsigned long long rdclock(void) +{ + struct timespec ts; + + clock_gettime(CLOCK_MONOTONIC, &ts); + return ts.tv_sec * 1000000000ULL + ts.tv_nsec; +} + +/* + * Pick up some kernel type conventions: + */ +#define __user +#define asmlinkage + +#define unlikely(x) __builtin_expect(!!(x), 0) +#define min(x, y) ({ \ + typeof(x) _min1 = (x); \ + typeof(y) _min2 = (y); \ + (void) (&_min1 == &_min2); \ + _min1 < _min2 ? _min1 : _min2; }) + +static inline int +sys_perf_counter_open(struct perf_counter_attr *attr, + pid_t pid, int cpu, int group_fd, + unsigned long flags) +{ + attr->size = sizeof(*attr); + return syscall(__NR_perf_counter_open, attr, pid, cpu, + group_fd, flags); +} + +#define MAX_COUNTERS 256 +#define MAX_NR_CPUS 256 + +#endif diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN new file mode 100755 index 0000000..c561d15 --- /dev/null +++ b/tools/perf/util/PERF-VERSION-GEN @@ -0,0 +1,42 @@ +#!/bin/sh + +GVF=PERF-VERSION-FILE +DEF_VER=v0.0.1.PERF + +LF=' +' + +# First see if there is a version file (included in release tarballs), +# then try git-describe, then default. +if test -f version +then + VN=$(cat version) || VN="$DEF_VER" +elif test -d .git -o -f .git && + VN=$(git describe --abbrev=4 HEAD 2>/dev/null) && + case "$VN" in + *$LF*) (exit 1) ;; + v[0-9]*) + git update-index -q --refresh + test -z "$(git diff-index --name-only HEAD --)" || + VN="$VN-dirty" ;; + esac +then + VN=$(echo "$VN" | sed -e 's/-/./g'); +else + VN="$DEF_VER" +fi + +VN=$(expr "$VN" : v*'\(.*\)') + +if test -r $GVF +then + VC=$(sed -e 's/^PERF_VERSION = //' <$GVF) +else + VC=unset +fi +test "$VN" = "$VC" || { + echo >&2 "PERF_VERSION = $VN" + echo "PERF_VERSION = $VN" >$GVF +} + + diff --git a/tools/perf/util/abspath.c b/tools/perf/util/abspath.c new file mode 100644 index 0000000..61d33b8 --- /dev/null +++ b/tools/perf/util/abspath.c @@ -0,0 +1,117 @@ +#include "cache.h" + +/* + * Do not use this for inspecting *tracked* content. When path is a + * symlink to a directory, we do not want to say it is a directory when + * dealing with tracked content in the working tree. + */ +static int is_directory(const char *path) +{ + struct stat st; + return (!stat(path, &st) && S_ISDIR(st.st_mode)); +} + +/* We allow "recursive" symbolic links. Only within reason, though. */ +#define MAXDEPTH 5 + +const char *make_absolute_path(const char *path) +{ + static char bufs[2][PATH_MAX + 1], *buf = bufs[0], *next_buf = bufs[1]; + char cwd[1024] = ""; + int buf_index = 1, len; + + int depth = MAXDEPTH; + char *last_elem = NULL; + struct stat st; + + if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX) + die ("Too long path: %.*s", 60, path); + + while (depth--) { + if (!is_directory(buf)) { + char *last_slash = strrchr(buf, '/'); + if (last_slash) { + *last_slash = '\0'; + last_elem = xstrdup(last_slash + 1); + } else { + last_elem = xstrdup(buf); + *buf = '\0'; + } + } + + if (*buf) { + if (!*cwd && !getcwd(cwd, sizeof(cwd))) + die ("Could not get current working directory"); + + if (chdir(buf)) + die ("Could not switch to '%s'", buf); + } + if (!getcwd(buf, PATH_MAX)) + die ("Could not get current working directory"); + + if (last_elem) { + int len = strlen(buf); + if (len + strlen(last_elem) + 2 > PATH_MAX) + die ("Too long path name: '%s/%s'", + buf, last_elem); + buf[len] = '/'; + strcpy(buf + len + 1, last_elem); + free(last_elem); + last_elem = NULL; + } + + if (!lstat(buf, &st) && S_ISLNK(st.st_mode)) { + len = readlink(buf, next_buf, PATH_MAX); + if (len < 0) + die ("Invalid symlink: %s", buf); + if (PATH_MAX <= len) + die("symbolic link too long: %s", buf); + next_buf[len] = '\0'; + buf = next_buf; + buf_index = 1 - buf_index; + next_buf = bufs[buf_index]; + } else + break; + } + + if (*cwd && chdir(cwd)) + die ("Could not change back to '%s'", cwd); + + return buf; +} + +static const char *get_pwd_cwd(void) +{ + static char cwd[PATH_MAX + 1]; + char *pwd; + struct stat cwd_stat, pwd_stat; + if (getcwd(cwd, PATH_MAX) == NULL) + return NULL; + pwd = getenv("PWD"); + if (pwd && strcmp(pwd, cwd)) { + stat(cwd, &cwd_stat); + if (!stat(pwd, &pwd_stat) && + pwd_stat.st_dev == cwd_stat.st_dev && + pwd_stat.st_ino == cwd_stat.st_ino) { + strlcpy(cwd, pwd, PATH_MAX); + } + } + return cwd; +} + +const char *make_nonrelative_path(const char *path) +{ + static char buf[PATH_MAX + 1]; + + if (is_absolute_path(path)) { + if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX) + die("Too long path: %.*s", 60, path); + } else { + const char *cwd = get_pwd_cwd(); + if (!cwd) + die("Cannot determine the current working directory"); + if (snprintf(buf, PATH_MAX, "%s/%s", cwd, path) >= PATH_MAX) + die("Too long path: %.*s", 60, path); + } + return buf; +} diff --git a/tools/perf/util/alias.c b/tools/perf/util/alias.c new file mode 100644 index 0000000..9b3dd2b --- /dev/null +++ b/tools/perf/util/alias.c @@ -0,0 +1,77 @@ +#include "cache.h" + +static const char *alias_key; +static char *alias_val; + +static int alias_lookup_cb(const char *k, const char *v, void *cb) +{ + if (!prefixcmp(k, "alias.") && !strcmp(k+6, alias_key)) { + if (!v) + return config_error_nonbool(k); + alias_val = strdup(v); + return 0; + } + return 0; +} + +char *alias_lookup(const char *alias) +{ + alias_key = alias; + alias_val = NULL; + perf_config(alias_lookup_cb, NULL); + return alias_val; +} + +int split_cmdline(char *cmdline, const char ***argv) +{ + int src, dst, count = 0, size = 16; + char quoted = 0; + + *argv = malloc(sizeof(char*) * size); + + /* split alias_string */ + (*argv)[count++] = cmdline; + for (src = dst = 0; cmdline[src];) { + char c = cmdline[src]; + if (!quoted && isspace(c)) { + cmdline[dst++] = 0; + while (cmdline[++src] + && isspace(cmdline[src])) + ; /* skip */ + if (count >= size) { + size += 16; + *argv = realloc(*argv, sizeof(char*) * size); + } + (*argv)[count++] = cmdline + dst; + } else if (!quoted && (c == '\'' || c == '"')) { + quoted = c; + src++; + } else if (c == quoted) { + quoted = 0; + src++; + } else { + if (c == '\\' && quoted != '\'') { + src++; + c = cmdline[src]; + if (!c) { + free(*argv); + *argv = NULL; + return error("cmdline ends with \\"); + } + } + cmdline[dst++] = c; + src++; + } + } + + cmdline[dst] = 0; + + if (quoted) { + free(*argv); + *argv = NULL; + return error("unclosed quote"); + } + + return count; +} + diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h new file mode 100644 index 0000000..393d614 --- /dev/null +++ b/tools/perf/util/cache.h @@ -0,0 +1,119 @@ +#ifndef CACHE_H +#define CACHE_H + +#include "util.h" +#include "strbuf.h" + +#define PERF_DIR_ENVIRONMENT "PERF_DIR" +#define PERF_WORK_TREE_ENVIRONMENT "PERF_WORK_TREE" +#define DEFAULT_PERF_DIR_ENVIRONMENT ".perf" +#define DB_ENVIRONMENT "PERF_OBJECT_DIRECTORY" +#define INDEX_ENVIRONMENT "PERF_INDEX_FILE" +#define GRAFT_ENVIRONMENT "PERF_GRAFT_FILE" +#define TEMPLATE_DIR_ENVIRONMENT "PERF_TEMPLATE_DIR" +#define CONFIG_ENVIRONMENT "PERF_CONFIG" +#define EXEC_PATH_ENVIRONMENT "PERF_EXEC_PATH" +#define CEILING_DIRECTORIES_ENVIRONMENT "PERF_CEILING_DIRECTORIES" +#define PERFATTRIBUTES_FILE ".perfattributes" +#define INFOATTRIBUTES_FILE "info/attributes" +#define ATTRIBUTE_MACRO_PREFIX "[attr]" + +typedef int (*config_fn_t)(const char *, const char *, void *); +extern int perf_default_config(const char *, const char *, void *); +extern int perf_config_from_file(config_fn_t fn, const char *, void *); +extern int perf_config(config_fn_t fn, void *); +extern int perf_parse_ulong(const char *, unsigned long *); +extern int perf_config_int(const char *, const char *); +extern unsigned long perf_config_ulong(const char *, const char *); +extern int perf_config_bool_or_int(const char *, const char *, int *); +extern int perf_config_bool(const char *, const char *); +extern int perf_config_string(const char **, const char *, const char *); +extern int perf_config_set(const char *, const char *); +extern int perf_config_set_multivar(const char *, const char *, const char *, int); +extern int perf_config_rename_section(const char *, const char *); +extern const char *perf_etc_perfconfig(void); +extern int check_repository_format_version(const char *var, const char *value, void *cb); +extern int perf_config_system(void); +extern int perf_config_global(void); +extern int config_error_nonbool(const char *); +extern const char *config_exclusive_filename; + +#define MAX_PERFNAME (1000) +extern char perf_default_email[MAX_PERFNAME]; +extern char perf_default_name[MAX_PERFNAME]; +extern int user_ident_explicitly_given; + +extern const char *perf_log_output_encoding; +extern const char *perf_mailmap_file; + +/* IO helper functions */ +extern void maybe_flush_or_die(FILE *, const char *); +extern int copy_fd(int ifd, int ofd); +extern int copy_file(const char *dst, const char *src, int mode); +extern ssize_t read_in_full(int fd, void *buf, size_t count); +extern ssize_t write_in_full(int fd, const void *buf, size_t count); +extern void write_or_die(int fd, const void *buf, size_t count); +extern int write_or_whine(int fd, const void *buf, size_t count, const char *msg); +extern int write_or_whine_pipe(int fd, const void *buf, size_t count, const char *msg); +extern void fsync_or_die(int fd, const char *); + +/* pager.c */ +extern void setup_pager(void); +extern const char *pager_program; +extern int pager_in_use(void); +extern int pager_use_color; + +extern const char *editor_program; +extern const char *excludes_file; + +char *alias_lookup(const char *alias); +int split_cmdline(char *cmdline, const char ***argv); + +#define alloc_nr(x) (((x)+16)*3/2) + +/* + * Realloc the buffer pointed at by variable 'x' so that it can hold + * at least 'nr' entries; the number of entries currently allocated + * is 'alloc', using the standard growing factor alloc_nr() macro. + * + * DO NOT USE any expression with side-effect for 'x' or 'alloc'. + */ +#define ALLOC_GROW(x, nr, alloc) \ + do { \ + if ((nr) > alloc) { \ + if (alloc_nr(alloc) < (nr)) \ + alloc = (nr); \ + else \ + alloc = alloc_nr(alloc); \ + x = xrealloc((x), alloc * sizeof(*(x))); \ + } \ + } while(0) + + +static inline int is_absolute_path(const char *path) +{ + return path[0] == '/'; +} + +const char *make_absolute_path(const char *path); +const char *make_nonrelative_path(const char *path); +const char *make_relative_path(const char *abs, const char *base); +int normalize_path_copy(char *dst, const char *src); +int longest_ancestor_length(const char *path, const char *prefix_list); +char *strip_path_suffix(const char *path, const char *suffix); + +extern char *mkpath(const char *fmt, ...) __attribute__((format (printf, 1, 2))); +extern char *perf_path(const char *fmt, ...) __attribute__((format (printf, 1, 2))); +/* perf_mkstemp() - create tmp file honoring TMPDIR variable */ +extern int perf_mkstemp(char *path, size_t len, const char *template); + +extern char *mksnpath(char *buf, size_t n, const char *fmt, ...) + __attribute__((format (printf, 3, 4))); +extern char *perf_snpath(char *buf, size_t n, const char *fmt, ...) + __attribute__((format (printf, 3, 4))); +extern char *perf_pathdup(const char *fmt, ...) + __attribute__((format (printf, 1, 2))); + +extern size_t strlcpy(char *dest, const char *src, size_t size); + +#endif /* CACHE_H */ diff --git a/tools/perf/util/color.c b/tools/perf/util/color.c new file mode 100644 index 0000000..9a8c20c --- /dev/null +++ b/tools/perf/util/color.c @@ -0,0 +1,241 @@ +#include "cache.h" +#include "color.h" + +int perf_use_color_default = -1; + +static int parse_color(const char *name, int len) +{ + static const char * const color_names[] = { + "normal", "black", "red", "green", "yellow", + "blue", "magenta", "cyan", "white" + }; + char *end; + int i; + for (i = 0; i < ARRAY_SIZE(color_names); i++) { + const char *str = color_names[i]; + if (!strncasecmp(name, str, len) && !str[len]) + return i - 1; + } + i = strtol(name, &end, 10); + if (end - name == len && i >= -1 && i <= 255) + return i; + return -2; +} + +static int parse_attr(const char *name, int len) +{ + static const int attr_values[] = { 1, 2, 4, 5, 7 }; + static const char * const attr_names[] = { + "bold", "dim", "ul", "blink", "reverse" + }; + int i; + for (i = 0; i < ARRAY_SIZE(attr_names); i++) { + const char *str = attr_names[i]; + if (!strncasecmp(name, str, len) && !str[len]) + return attr_values[i]; + } + return -1; +} + +void color_parse(const char *value, const char *var, char *dst) +{ + color_parse_mem(value, strlen(value), var, dst); +} + +void color_parse_mem(const char *value, int value_len, const char *var, + char *dst) +{ + const char *ptr = value; + int len = value_len; + int attr = -1; + int fg = -2; + int bg = -2; + + if (!strncasecmp(value, "reset", len)) { + strcpy(dst, PERF_COLOR_RESET); + return; + } + + /* [fg [bg]] [attr] */ + while (len > 0) { + const char *word = ptr; + int val, wordlen = 0; + + while (len > 0 && !isspace(word[wordlen])) { + wordlen++; + len--; + } + + ptr = word + wordlen; + while (len > 0 && isspace(*ptr)) { + ptr++; + len--; + } + + val = parse_color(word, wordlen); + if (val >= -1) { + if (fg == -2) { + fg = val; + continue; + } + if (bg == -2) { + bg = val; + continue; + } + goto bad; + } + val = parse_attr(word, wordlen); + if (val < 0 || attr != -1) + goto bad; + attr = val; + } + + if (attr >= 0 || fg >= 0 || bg >= 0) { + int sep = 0; + + *dst++ = '\033'; + *dst++ = '['; + if (attr >= 0) { + *dst++ = '0' + attr; + sep++; + } + if (fg >= 0) { + if (sep++) + *dst++ = ';'; + if (fg < 8) { + *dst++ = '3'; + *dst++ = '0' + fg; + } else { + dst += sprintf(dst, "38;5;%d", fg); + } + } + if (bg >= 0) { + if (sep++) + *dst++ = ';'; + if (bg < 8) { + *dst++ = '4'; + *dst++ = '0' + bg; + } else { + dst += sprintf(dst, "48;5;%d", bg); + } + } + *dst++ = 'm'; + } + *dst = 0; + return; +bad: + die("bad color value '%.*s' for variable '%s'", value_len, value, var); +} + +int perf_config_colorbool(const char *var, const char *value, int stdout_is_tty) +{ + if (value) { + if (!strcasecmp(value, "never")) + return 0; + if (!strcasecmp(value, "always")) + return 1; + if (!strcasecmp(value, "auto")) + goto auto_color; + } + + /* Missing or explicit false to turn off colorization */ + if (!perf_config_bool(var, value)) + return 0; + + /* any normal truth value defaults to 'auto' */ + auto_color: + if (stdout_is_tty < 0) + stdout_is_tty = isatty(1); + if (stdout_is_tty || (pager_in_use() && pager_use_color)) { + char *term = getenv("TERM"); + if (term && strcmp(term, "dumb")) + return 1; + } + return 0; +} + +int perf_color_default_config(const char *var, const char *value, void *cb) +{ + if (!strcmp(var, "color.ui")) { + perf_use_color_default = perf_config_colorbool(var, value, -1); + return 0; + } + + return perf_default_config(var, value, cb); +} + +static int color_vfprintf(FILE *fp, const char *color, const char *fmt, + va_list args, const char *trail) +{ + int r = 0; + + /* + * Auto-detect: + */ + if (perf_use_color_default < 0) { + if (isatty(1) || pager_in_use()) + perf_use_color_default = 1; + else + perf_use_color_default = 0; + } + + if (perf_use_color_default && *color) + r += fprintf(fp, "%s", color); + r += vfprintf(fp, fmt, args); + if (perf_use_color_default && *color) + r += fprintf(fp, "%s", PERF_COLOR_RESET); + if (trail) + r += fprintf(fp, "%s", trail); + return r; +} + + + +int color_fprintf(FILE *fp, const char *color, const char *fmt, ...) +{ + va_list args; + int r; + + va_start(args, fmt); + r = color_vfprintf(fp, color, fmt, args, NULL); + va_end(args); + return r; +} + +int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...) +{ + va_list args; + int r; + va_start(args, fmt); + r = color_vfprintf(fp, color, fmt, args, "\n"); + va_end(args); + return r; +} + +/* + * This function splits the buffer by newlines and colors the lines individually. + * + * Returns 0 on success. + */ +int color_fwrite_lines(FILE *fp, const char *color, + size_t count, const char *buf) +{ + if (!*color) + return fwrite(buf, count, 1, fp) != 1; + while (count) { + char *p = memchr(buf, '\n', count); + if (p != buf && (fputs(color, fp) < 0 || + fwrite(buf, p ? p - buf : count, 1, fp) != 1 || + fputs(PERF_COLOR_RESET, fp) < 0)) + return -1; + if (!p) + return 0; + if (fputc('\n', fp) < 0) + return -1; + count -= p + 1 - buf; + buf = p + 1; + } + return 0; +} + + diff --git a/tools/perf/util/color.h b/tools/perf/util/color.h new file mode 100644 index 0000000..5abfd37 --- /dev/null +++ b/tools/perf/util/color.h @@ -0,0 +1,36 @@ +#ifndef COLOR_H +#define COLOR_H + +/* "\033[1;38;5;2xx;48;5;2xxm\0" is 23 bytes */ +#define COLOR_MAXLEN 24 + +#define PERF_COLOR_NORMAL "" +#define PERF_COLOR_RESET "\033[m" +#define PERF_COLOR_BOLD "\033[1m" +#define PERF_COLOR_RED "\033[31m" +#define PERF_COLOR_GREEN "\033[32m" +#define PERF_COLOR_YELLOW "\033[33m" +#define PERF_COLOR_BLUE "\033[34m" +#define PERF_COLOR_MAGENTA "\033[35m" +#define PERF_COLOR_CYAN "\033[36m" +#define PERF_COLOR_BG_RED "\033[41m" + +/* + * This variable stores the value of color.ui + */ +extern int perf_use_color_default; + + +/* + * Use this instead of perf_default_config if you need the value of color.ui. + */ +int perf_color_default_config(const char *var, const char *value, void *cb); + +int perf_config_colorbool(const char *var, const char *value, int stdout_is_tty); +void color_parse(const char *value, const char *var, char *dst); +void color_parse_mem(const char *value, int len, const char *var, char *dst); +int color_fprintf(FILE *fp, const char *color, const char *fmt, ...); +int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...); +int color_fwrite_lines(FILE *fp, const char *color, size_t count, const char *buf); + +#endif /* COLOR_H */ diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c new file mode 100644 index 0000000..3dd13fa --- /dev/null +++ b/tools/perf/util/config.c @@ -0,0 +1,873 @@ +/* + * GIT - The information manager from hell + * + * Copyright (C) Linus Torvalds, 2005 + * Copyright (C) Johannes Schindelin, 2005 + * + */ +#include "util.h" +#include "cache.h" +#include "exec_cmd.h" + +#define MAXNAME (256) + +static FILE *config_file; +static const char *config_file_name; +static int config_linenr; +static int config_file_eof; + +const char *config_exclusive_filename = NULL; + +static int get_next_char(void) +{ + int c; + FILE *f; + + c = '\n'; + if ((f = config_file) != NULL) { + c = fgetc(f); + if (c == '\r') { + /* DOS like systems */ + c = fgetc(f); + if (c != '\n') { + ungetc(c, f); + c = '\r'; + } + } + if (c == '\n') + config_linenr++; + if (c == EOF) { + config_file_eof = 1; + c = '\n'; + } + } + return c; +} + +static char *parse_value(void) +{ + static char value[1024]; + int quote = 0, comment = 0, len = 0, space = 0; + + for (;;) { + int c = get_next_char(); + if (len >= sizeof(value) - 1) + return NULL; + if (c == '\n') { + if (quote) + return NULL; + value[len] = 0; + return value; + } + if (comment) + continue; + if (isspace(c) && !quote) { + space = 1; + continue; + } + if (!quote) { + if (c == ';' || c == '#') { + comment = 1; + continue; + } + } + if (space) { + if (len) + value[len++] = ' '; + space = 0; + } + if (c == '\\') { + c = get_next_char(); + switch (c) { + case '\n': + continue; + case 't': + c = '\t'; + break; + case 'b': + c = '\b'; + break; + case 'n': + c = '\n'; + break; + /* Some characters escape as themselves */ + case '\\': case '"': + break; + /* Reject unknown escape sequences */ + default: + return NULL; + } + value[len++] = c; + continue; + } + if (c == '"') { + quote = 1-quote; + continue; + } + value[len++] = c; + } +} + +static inline int iskeychar(int c) +{ + return isalnum(c) || c == '-'; +} + +static int get_value(config_fn_t fn, void *data, char *name, unsigned int len) +{ + int c; + char *value; + + /* Get the full name */ + for (;;) { + c = get_next_char(); + if (config_file_eof) + break; + if (!iskeychar(c)) + break; + name[len++] = tolower(c); + if (len >= MAXNAME) + return -1; + } + name[len] = 0; + while (c == ' ' || c == '\t') + c = get_next_char(); + + value = NULL; + if (c != '\n') { + if (c != '=') + return -1; + value = parse_value(); + if (!value) + return -1; + } + return fn(name, value, data); +} + +static int get_extended_base_var(char *name, int baselen, int c) +{ + do { + if (c == '\n') + return -1; + c = get_next_char(); + } while (isspace(c)); + + /* We require the format to be '[base "extension"]' */ + if (c != '"') + return -1; + name[baselen++] = '.'; + + for (;;) { + int c = get_next_char(); + if (c == '\n') + return -1; + if (c == '"') + break; + if (c == '\\') { + c = get_next_char(); + if (c == '\n') + return -1; + } + name[baselen++] = c; + if (baselen > MAXNAME / 2) + return -1; + } + + /* Final ']' */ + if (get_next_char() != ']') + return -1; + return baselen; +} + +static int get_base_var(char *name) +{ + int baselen = 0; + + for (;;) { + int c = get_next_char(); + if (config_file_eof) + return -1; + if (c == ']') + return baselen; + if (isspace(c)) + return get_extended_base_var(name, baselen, c); + if (!iskeychar(c) && c != '.') + return -1; + if (baselen > MAXNAME / 2) + return -1; + name[baselen++] = tolower(c); + } +} + +static int perf_parse_file(config_fn_t fn, void *data) +{ + int comment = 0; + int baselen = 0; + static char var[MAXNAME]; + + /* U+FEFF Byte Order Mark in UTF8 */ + static const unsigned char *utf8_bom = (unsigned char *) "\xef\xbb\xbf"; + const unsigned char *bomptr = utf8_bom; + + for (;;) { + int c = get_next_char(); + if (bomptr && *bomptr) { + /* We are at the file beginning; skip UTF8-encoded BOM + * if present. Sane editors won't put this in on their + * own, but e.g. Windows Notepad will do it happily. */ + if ((unsigned char) c == *bomptr) { + bomptr++; + continue; + } else { + /* Do not tolerate partial BOM. */ + if (bomptr != utf8_bom) + break; + /* No BOM at file beginning. Cool. */ + bomptr = NULL; + } + } + if (c == '\n') { + if (config_file_eof) + return 0; + comment = 0; + continue; + } + if (comment || isspace(c)) + continue; + if (c == '#' || c == ';') { + comment = 1; + continue; + } + if (c == '[') { + baselen = get_base_var(var); + if (baselen <= 0) + break; + var[baselen++] = '.'; + var[baselen] = 0; + continue; + } + if (!isalpha(c)) + break; + var[baselen] = tolower(c); + if (get_value(fn, data, var, baselen+1) < 0) + break; + } + die("bad config file line %d in %s", config_linenr, config_file_name); +} + +static int parse_unit_factor(const char *end, unsigned long *val) +{ + if (!*end) + return 1; + else if (!strcasecmp(end, "k")) { + *val *= 1024; + return 1; + } + else if (!strcasecmp(end, "m")) { + *val *= 1024 * 1024; + return 1; + } + else if (!strcasecmp(end, "g")) { + *val *= 1024 * 1024 * 1024; + return 1; + } + return 0; +} + +static int perf_parse_long(const char *value, long *ret) +{ + if (value && *value) { + char *end; + long val = strtol(value, &end, 0); + unsigned long factor = 1; + if (!parse_unit_factor(end, &factor)) + return 0; + *ret = val * factor; + return 1; + } + return 0; +} + +int perf_parse_ulong(const char *value, unsigned long *ret) +{ + if (value && *value) { + char *end; + unsigned long val = strtoul(value, &end, 0); + if (!parse_unit_factor(end, &val)) + return 0; + *ret = val; + return 1; + } + return 0; +} + +static void die_bad_config(const char *name) +{ + if (config_file_name) + die("bad config value for '%s' in %s", name, config_file_name); + die("bad config value for '%s'", name); +} + +int perf_config_int(const char *name, const char *value) +{ + long ret = 0; + if (!perf_parse_long(value, &ret)) + die_bad_config(name); + return ret; +} + +unsigned long perf_config_ulong(const char *name, const char *value) +{ + unsigned long ret; + if (!perf_parse_ulong(value, &ret)) + die_bad_config(name); + return ret; +} + +int perf_config_bool_or_int(const char *name, const char *value, int *is_bool) +{ + *is_bool = 1; + if (!value) + return 1; + if (!*value) + return 0; + if (!strcasecmp(value, "true") || !strcasecmp(value, "yes") || !strcasecmp(value, "on")) + return 1; + if (!strcasecmp(value, "false") || !strcasecmp(value, "no") || !strcasecmp(value, "off")) + return 0; + *is_bool = 0; + return perf_config_int(name, value); +} + +int perf_config_bool(const char *name, const char *value) +{ + int discard; + return !!perf_config_bool_or_int(name, value, &discard); +} + +int perf_config_string(const char **dest, const char *var, const char *value) +{ + if (!value) + return config_error_nonbool(var); + *dest = strdup(value); + return 0; +} + +static int perf_default_core_config(const char *var, const char *value) +{ + /* Add other config variables here and to Documentation/config.txt. */ + return 0; +} + +int perf_default_config(const char *var, const char *value, void *dummy) +{ + if (!prefixcmp(var, "core.")) + return perf_default_core_config(var, value); + + /* Add other config variables here and to Documentation/config.txt. */ + return 0; +} + +int perf_config_from_file(config_fn_t fn, const char *filename, void *data) +{ + int ret; + FILE *f = fopen(filename, "r"); + + ret = -1; + if (f) { + config_file = f; + config_file_name = filename; + config_linenr = 1; + config_file_eof = 0; + ret = perf_parse_file(fn, data); + fclose(f); + config_file_name = NULL; + } + return ret; +} + +const char *perf_etc_perfconfig(void) +{ + static const char *system_wide; + if (!system_wide) + system_wide = system_path(ETC_PERFCONFIG); + return system_wide; +} + +static int perf_env_bool(const char *k, int def) +{ + const char *v = getenv(k); + return v ? perf_config_bool(k, v) : def; +} + +int perf_config_system(void) +{ + return !perf_env_bool("PERF_CONFIG_NOSYSTEM", 0); +} + +int perf_config_global(void) +{ + return !perf_env_bool("PERF_CONFIG_NOGLOBAL", 0); +} + +int perf_config(config_fn_t fn, void *data) +{ + int ret = 0, found = 0; + char *repo_config = NULL; + const char *home = NULL; + + /* Setting $PERF_CONFIG makes perf read _only_ the given config file. */ + if (config_exclusive_filename) + return perf_config_from_file(fn, config_exclusive_filename, data); + if (perf_config_system() && !access(perf_etc_perfconfig(), R_OK)) { + ret += perf_config_from_file(fn, perf_etc_perfconfig(), + data); + found += 1; + } + + home = getenv("HOME"); + if (perf_config_global() && home) { + char *user_config = strdup(mkpath("%s/.perfconfig", home)); + if (!access(user_config, R_OK)) { + ret += perf_config_from_file(fn, user_config, data); + found += 1; + } + free(user_config); + } + + repo_config = perf_pathdup("config"); + if (!access(repo_config, R_OK)) { + ret += perf_config_from_file(fn, repo_config, data); + found += 1; + } + free(repo_config); + if (found == 0) + return -1; + return ret; +} + +/* + * Find all the stuff for perf_config_set() below. + */ + +#define MAX_MATCHES 512 + +static struct { + int baselen; + char* key; + int do_not_match; + regex_t* value_regex; + int multi_replace; + size_t offset[MAX_MATCHES]; + enum { START, SECTION_SEEN, SECTION_END_SEEN, KEY_SEEN } state; + int seen; +} store; + +static int matches(const char* key, const char* value) +{ + return !strcmp(key, store.key) && + (store.value_regex == NULL || + (store.do_not_match ^ + !regexec(store.value_regex, value, 0, NULL, 0))); +} + +static int store_aux(const char* key, const char* value, void *cb) +{ + const char *ep; + size_t section_len; + + switch (store.state) { + case KEY_SEEN: + if (matches(key, value)) { + if (store.seen == 1 && store.multi_replace == 0) { + warning("%s has multiple values", key); + } else if (store.seen >= MAX_MATCHES) { + error("too many matches for %s", key); + return 1; + } + + store.offset[store.seen] = ftell(config_file); + store.seen++; + } + break; + case SECTION_SEEN: + /* + * What we are looking for is in store.key (both + * section and var), and its section part is baselen + * long. We found key (again, both section and var). + * We would want to know if this key is in the same + * section as what we are looking for. We already + * know we are in the same section as what should + * hold store.key. + */ + ep = strrchr(key, '.'); + section_len = ep - key; + + if ((section_len != store.baselen) || + memcmp(key, store.key, section_len+1)) { + store.state = SECTION_END_SEEN; + break; + } + + /* + * Do not increment matches: this is no match, but we + * just made sure we are in the desired section. + */ + store.offset[store.seen] = ftell(config_file); + /* fallthru */ + case SECTION_END_SEEN: + case START: + if (matches(key, value)) { + store.offset[store.seen] = ftell(config_file); + store.state = KEY_SEEN; + store.seen++; + } else { + if (strrchr(key, '.') - key == store.baselen && + !strncmp(key, store.key, store.baselen)) { + store.state = SECTION_SEEN; + store.offset[store.seen] = ftell(config_file); + } + } + } + return 0; +} + +static int store_write_section(int fd, const char* key) +{ + const char *dot; + int i, success; + struct strbuf sb = STRBUF_INIT; + + dot = memchr(key, '.', store.baselen); + if (dot) { + strbuf_addf(&sb, "[%.*s \"", (int)(dot - key), key); + for (i = dot - key + 1; i < store.baselen; i++) { + if (key[i] == '"' || key[i] == '\\') + strbuf_addch(&sb, '\\'); + strbuf_addch(&sb, key[i]); + } + strbuf_addstr(&sb, "\"]\n"); + } else { + strbuf_addf(&sb, "[%.*s]\n", store.baselen, key); + } + + success = write_in_full(fd, sb.buf, sb.len) == sb.len; + strbuf_release(&sb); + + return success; +} + +static int store_write_pair(int fd, const char* key, const char* value) +{ + int i, success; + int length = strlen(key + store.baselen + 1); + const char *quote = ""; + struct strbuf sb = STRBUF_INIT; + + /* + * Check to see if the value needs to be surrounded with a dq pair. + * Note that problematic characters are always backslash-quoted; this + * check is about not losing leading or trailing SP and strings that + * follow beginning-of-comment characters (i.e. ';' and '#') by the + * configuration parser. + */ + if (value[0] == ' ') + quote = "\""; + for (i = 0; value[i]; i++) + if (value[i] == ';' || value[i] == '#') + quote = "\""; + if (i && value[i - 1] == ' ') + quote = "\""; + + strbuf_addf(&sb, "\t%.*s = %s", + length, key + store.baselen + 1, quote); + + for (i = 0; value[i]; i++) + switch (value[i]) { + case '\n': + strbuf_addstr(&sb, "\\n"); + break; + case '\t': + strbuf_addstr(&sb, "\\t"); + break; + case '"': + case '\\': + strbuf_addch(&sb, '\\'); + default: + strbuf_addch(&sb, value[i]); + break; + } + strbuf_addf(&sb, "%s\n", quote); + + success = write_in_full(fd, sb.buf, sb.len) == sb.len; + strbuf_release(&sb); + + return success; +} + +static ssize_t find_beginning_of_line(const char* contents, size_t size, + size_t offset_, int* found_bracket) +{ + size_t equal_offset = size, bracket_offset = size; + ssize_t offset; + +contline: + for (offset = offset_-2; offset > 0 + && contents[offset] != '\n'; offset--) + switch (contents[offset]) { + case '=': equal_offset = offset; break; + case ']': bracket_offset = offset; break; + } + if (offset > 0 && contents[offset-1] == '\\') { + offset_ = offset; + goto contline; + } + if (bracket_offset < equal_offset) { + *found_bracket = 1; + offset = bracket_offset+1; + } else + offset++; + + return offset; +} + +int perf_config_set(const char* key, const char* value) +{ + return perf_config_set_multivar(key, value, NULL, 0); +} + +/* + * If value==NULL, unset in (remove from) config, + * if value_regex!=NULL, disregard key/value pairs where value does not match. + * if multi_replace==0, nothing, or only one matching key/value is replaced, + * else all matching key/values (regardless how many) are removed, + * before the new pair is written. + * + * Returns 0 on success. + * + * This function does this: + * + * - it locks the config file by creating ".perf/config.lock" + * + * - it then parses the config using store_aux() as validator to find + * the position on the key/value pair to replace. If it is to be unset, + * it must be found exactly once. + * + * - the config file is mmap()ed and the part before the match (if any) is + * written to the lock file, then the changed part and the rest. + * + * - the config file is removed and the lock file rename()d to it. + * + */ +int perf_config_set_multivar(const char* key, const char* value, + const char* value_regex, int multi_replace) +{ + int i, dot; + int fd = -1, in_fd; + int ret = 0; + char* config_filename; + const char* last_dot = strrchr(key, '.'); + + if (config_exclusive_filename) + config_filename = strdup(config_exclusive_filename); + else + config_filename = perf_pathdup("config"); + + /* + * Since "key" actually contains the section name and the real + * key name separated by a dot, we have to know where the dot is. + */ + + if (last_dot == NULL) { + error("key does not contain a section: %s", key); + ret = 2; + goto out_free; + } + store.baselen = last_dot - key; + + store.multi_replace = multi_replace; + + /* + * Validate the key and while at it, lower case it for matching. + */ + store.key = malloc(strlen(key) + 1); + dot = 0; + for (i = 0; key[i]; i++) { + unsigned char c = key[i]; + if (c == '.') + dot = 1; + /* Leave the extended basename untouched.. */ + if (!dot || i > store.baselen) { + if (!iskeychar(c) || (i == store.baselen+1 && !isalpha(c))) { + error("invalid key: %s", key); + free(store.key); + ret = 1; + goto out_free; + } + c = tolower(c); + } else if (c == '\n') { + error("invalid key (newline): %s", key); + free(store.key); + ret = 1; + goto out_free; + } + store.key[i] = c; + } + store.key[i] = 0; + + /* + * If .perf/config does not exist yet, write a minimal version. + */ + in_fd = open(config_filename, O_RDONLY); + if ( in_fd < 0 ) { + free(store.key); + + if ( ENOENT != errno ) { + error("opening %s: %s", config_filename, + strerror(errno)); + ret = 3; /* same as "invalid config file" */ + goto out_free; + } + /* if nothing to unset, error out */ + if (value == NULL) { + ret = 5; + goto out_free; + } + + store.key = (char*)key; + if (!store_write_section(fd, key) || + !store_write_pair(fd, key, value)) + goto write_err_out; + } else { + struct stat st; + char* contents; + size_t contents_sz, copy_begin, copy_end; + int i, new_line = 0; + + if (value_regex == NULL) + store.value_regex = NULL; + else { + if (value_regex[0] == '!') { + store.do_not_match = 1; + value_regex++; + } else + store.do_not_match = 0; + + store.value_regex = (regex_t*)malloc(sizeof(regex_t)); + if (regcomp(store.value_regex, value_regex, + REG_EXTENDED)) { + error("invalid pattern: %s", value_regex); + free(store.value_regex); + ret = 6; + goto out_free; + } + } + + store.offset[0] = 0; + store.state = START; + store.seen = 0; + + /* + * After this, store.offset will contain the *end* offset + * of the last match, or remain at 0 if no match was found. + * As a side effect, we make sure to transform only a valid + * existing config file. + */ + if (perf_config_from_file(store_aux, config_filename, NULL)) { + error("invalid config file %s", config_filename); + free(store.key); + if (store.value_regex != NULL) { + regfree(store.value_regex); + free(store.value_regex); + } + ret = 3; + goto out_free; + } + + free(store.key); + if (store.value_regex != NULL) { + regfree(store.value_regex); + free(store.value_regex); + } + + /* if nothing to unset, or too many matches, error out */ + if ((store.seen == 0 && value == NULL) || + (store.seen > 1 && multi_replace == 0)) { + ret = 5; + goto out_free; + } + + fstat(in_fd, &st); + contents_sz = xsize_t(st.st_size); + contents = mmap(NULL, contents_sz, PROT_READ, + MAP_PRIVATE, in_fd, 0); + close(in_fd); + + if (store.seen == 0) + store.seen = 1; + + for (i = 0, copy_begin = 0; i < store.seen; i++) { + if (store.offset[i] == 0) { + store.offset[i] = copy_end = contents_sz; + } else if (store.state != KEY_SEEN) { + copy_end = store.offset[i]; + } else + copy_end = find_beginning_of_line( + contents, contents_sz, + store.offset[i]-2, &new_line); + + if (copy_end > 0 && contents[copy_end-1] != '\n') + new_line = 1; + + /* write the first part of the config */ + if (copy_end > copy_begin) { + if (write_in_full(fd, contents + copy_begin, + copy_end - copy_begin) < + copy_end - copy_begin) + goto write_err_out; + if (new_line && + write_in_full(fd, "\n", 1) != 1) + goto write_err_out; + } + copy_begin = store.offset[i]; + } + + /* write the pair (value == NULL means unset) */ + if (value != NULL) { + if (store.state == START) { + if (!store_write_section(fd, key)) + goto write_err_out; + } + if (!store_write_pair(fd, key, value)) + goto write_err_out; + } + + /* write the rest of the config */ + if (copy_begin < contents_sz) + if (write_in_full(fd, contents + copy_begin, + contents_sz - copy_begin) < + contents_sz - copy_begin) + goto write_err_out; + + munmap(contents, contents_sz); + } + + ret = 0; + +out_free: + free(config_filename); + return ret; + +write_err_out: + goto out_free; + +} + +/* + * Call this to report error for your variable that should not + * get a boolean value (i.e. "[my] var" means "true"). + */ +int config_error_nonbool(const char *var) +{ + return error("Missing value for '%s'", var); +} diff --git a/tools/perf/util/ctype.c b/tools/perf/util/ctype.c new file mode 100644 index 0000000..b90ec00 --- /dev/null +++ b/tools/perf/util/ctype.c @@ -0,0 +1,26 @@ +/* + * Sane locale-independent, ASCII ctype. + * + * No surprises, and works with signed and unsigned chars. + */ +#include "cache.h" + +enum { + S = GIT_SPACE, + A = GIT_ALPHA, + D = GIT_DIGIT, + G = GIT_GLOB_SPECIAL, /* *, ?, [, \\ */ + R = GIT_REGEX_SPECIAL, /* $, (, ), +, ., ^, {, | * */ +}; + +unsigned char sane_ctype[256] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, S, S, 0, 0, S, 0, 0, /* 0.. 15 */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 16.. 31 */ + S, 0, 0, 0, R, 0, 0, 0, R, R, G, R, 0, 0, R, 0, /* 32.. 47 */ + D, D, D, D, D, D, D, D, D, D, 0, 0, 0, 0, 0, G, /* 48.. 63 */ + 0, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A, /* 64.. 79 */ + A, A, A, A, A, A, A, A, A, A, A, G, G, 0, R, 0, /* 80.. 95 */ + 0, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A, /* 96..111 */ + A, A, A, A, A, A, A, A, A, A, A, R, R, 0, 0, 0, /* 112..127 */ + /* Nothing in the 128.. range */ +}; diff --git a/tools/perf/util/environment.c b/tools/perf/util/environment.c new file mode 100644 index 0000000..275b0ee --- /dev/null +++ b/tools/perf/util/environment.c @@ -0,0 +1,9 @@ +/* + * We put all the perf config variables in this same object + * file, so that programs can link against the config parser + * without having to link against all the rest of perf. + */ +#include "cache.h" + +const char *pager_program; +int pager_use_color = 1; diff --git a/tools/perf/util/exec_cmd.c b/tools/perf/util/exec_cmd.c new file mode 100644 index 0000000..d392922 --- /dev/null +++ b/tools/perf/util/exec_cmd.c @@ -0,0 +1,165 @@ +#include "cache.h" +#include "exec_cmd.h" +#include "quote.h" +#define MAX_ARGS 32 + +extern char **environ; +static const char *argv_exec_path; +static const char *argv0_path; + +const char *system_path(const char *path) +{ +#ifdef RUNTIME_PREFIX + static const char *prefix; +#else + static const char *prefix = PREFIX; +#endif + struct strbuf d = STRBUF_INIT; + + if (is_absolute_path(path)) + return path; + +#ifdef RUNTIME_PREFIX + assert(argv0_path); + assert(is_absolute_path(argv0_path)); + + if (!prefix && + !(prefix = strip_path_suffix(argv0_path, PERF_EXEC_PATH)) && + !(prefix = strip_path_suffix(argv0_path, BINDIR)) && + !(prefix = strip_path_suffix(argv0_path, "perf"))) { + prefix = PREFIX; + fprintf(stderr, "RUNTIME_PREFIX requested, " + "but prefix computation failed. " + "Using static fallback '%s'.\n", prefix); + } +#endif + + strbuf_addf(&d, "%s/%s", prefix, path); + path = strbuf_detach(&d, NULL); + return path; +} + +const char *perf_extract_argv0_path(const char *argv0) +{ + const char *slash; + + if (!argv0 || !*argv0) + return NULL; + slash = argv0 + strlen(argv0); + + while (argv0 <= slash && !is_dir_sep(*slash)) + slash--; + + if (slash >= argv0) { + argv0_path = strndup(argv0, slash - argv0); + return slash + 1; + } + + return argv0; +} + +void perf_set_argv_exec_path(const char *exec_path) +{ + argv_exec_path = exec_path; + /* + * Propagate this setting to external programs. + */ + setenv(EXEC_PATH_ENVIRONMENT, exec_path, 1); +} + + +/* Returns the highest-priority, location to look for perf programs. */ +const char *perf_exec_path(void) +{ + const char *env; + + if (argv_exec_path) + return argv_exec_path; + + env = getenv(EXEC_PATH_ENVIRONMENT); + if (env && *env) { + return env; + } + + return system_path(PERF_EXEC_PATH); +} + +static void add_path(struct strbuf *out, const char *path) +{ + if (path && *path) { + if (is_absolute_path(path)) + strbuf_addstr(out, path); + else + strbuf_addstr(out, make_nonrelative_path(path)); + + strbuf_addch(out, PATH_SEP); + } +} + +void setup_path(void) +{ + const char *old_path = getenv("PATH"); + struct strbuf new_path = STRBUF_INIT; + + add_path(&new_path, perf_exec_path()); + add_path(&new_path, argv0_path); + + if (old_path) + strbuf_addstr(&new_path, old_path); + else + strbuf_addstr(&new_path, "/usr/local/bin:/usr/bin:/bin"); + + setenv("PATH", new_path.buf, 1); + + strbuf_release(&new_path); +} + +const char **prepare_perf_cmd(const char **argv) +{ + int argc; + const char **nargv; + + for (argc = 0; argv[argc]; argc++) + ; /* just counting */ + nargv = malloc(sizeof(*nargv) * (argc + 2)); + + nargv[0] = "perf"; + for (argc = 0; argv[argc]; argc++) + nargv[argc + 1] = argv[argc]; + nargv[argc + 1] = NULL; + return nargv; +} + +int execv_perf_cmd(const char **argv) { + const char **nargv = prepare_perf_cmd(argv); + + /* execvp() can only ever return if it fails */ + execvp("perf", (char **)nargv); + + free(nargv); + return -1; +} + + +int execl_perf_cmd(const char *cmd,...) +{ + int argc; + const char *argv[MAX_ARGS + 1]; + const char *arg; + va_list param; + + va_start(param, cmd); + argv[0] = cmd; + argc = 1; + while (argc < MAX_ARGS) { + arg = argv[argc++] = va_arg(param, char *); + if (!arg) + break; + } + va_end(param); + if (MAX_ARGS <= argc) + return error("too many args to run %s", cmd); + + argv[argc] = NULL; + return execv_perf_cmd(argv); +} diff --git a/tools/perf/util/exec_cmd.h b/tools/perf/util/exec_cmd.h new file mode 100644 index 0000000..effe25e --- /dev/null +++ b/tools/perf/util/exec_cmd.h @@ -0,0 +1,13 @@ +#ifndef PERF_EXEC_CMD_H +#define PERF_EXEC_CMD_H + +extern void perf_set_argv_exec_path(const char *exec_path); +extern const char *perf_extract_argv0_path(const char *path); +extern const char *perf_exec_path(void); +extern void setup_path(void); +extern const char **prepare_perf_cmd(const char **argv); +extern int execv_perf_cmd(const char **argv); /* NULL terminated */ +extern int execl_perf_cmd(const char *cmd, ...); +extern const char *system_path(const char *path); + +#endif /* PERF_EXEC_CMD_H */ diff --git a/tools/perf/util/generate-cmdlist.sh b/tools/perf/util/generate-cmdlist.sh new file mode 100755 index 0000000..f06f6fd --- /dev/null +++ b/tools/perf/util/generate-cmdlist.sh @@ -0,0 +1,24 @@ +#!/bin/sh + +echo "/* Automatically generated by $0 */ +struct cmdname_help +{ + char name[16]; + char help[80]; +}; + +static struct cmdname_help common_cmds[] = {" + +sed -n -e 's/^perf-\([^ ]*\)[ ].* common.*/\1/p' command-list.txt | +sort | +while read cmd +do + sed -n ' + /^NAME/,/perf-'"$cmd"'/H + ${ + x + s/.*perf-'"$cmd"' - \(.*\)/ {"'"$cmd"'", "\1"},/ + p + }' "Documentation/perf-$cmd.txt" +done +echo "};" diff --git a/tools/perf/util/help.c b/tools/perf/util/help.c new file mode 100644 index 0000000..6653f7d --- /dev/null +++ b/tools/perf/util/help.c @@ -0,0 +1,367 @@ +#include "cache.h" +#include "../builtin.h" +#include "exec_cmd.h" +#include "levenshtein.h" +#include "help.h" + +/* most GUI terminals set COLUMNS (although some don't export it) */ +static int term_columns(void) +{ + char *col_string = getenv("COLUMNS"); + int n_cols; + + if (col_string && (n_cols = atoi(col_string)) > 0) + return n_cols; + +#ifdef TIOCGWINSZ + { + struct winsize ws; + if (!ioctl(1, TIOCGWINSZ, &ws)) { + if (ws.ws_col) + return ws.ws_col; + } + } +#endif + + return 80; +} + +void add_cmdname(struct cmdnames *cmds, const char *name, int len) +{ + struct cmdname *ent = malloc(sizeof(*ent) + len + 1); + + ent->len = len; + memcpy(ent->name, name, len); + ent->name[len] = 0; + + ALLOC_GROW(cmds->names, cmds->cnt + 1, cmds->alloc); + cmds->names[cmds->cnt++] = ent; +} + +static void clean_cmdnames(struct cmdnames *cmds) +{ + int i; + for (i = 0; i < cmds->cnt; ++i) + free(cmds->names[i]); + free(cmds->names); + cmds->cnt = 0; + cmds->alloc = 0; +} + +static int cmdname_compare(const void *a_, const void *b_) +{ + struct cmdname *a = *(struct cmdname **)a_; + struct cmdname *b = *(struct cmdname **)b_; + return strcmp(a->name, b->name); +} + +static void uniq(struct cmdnames *cmds) +{ + int i, j; + + if (!cmds->cnt) + return; + + for (i = j = 1; i < cmds->cnt; i++) + if (strcmp(cmds->names[i]->name, cmds->names[i-1]->name)) + cmds->names[j++] = cmds->names[i]; + + cmds->cnt = j; +} + +void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes) +{ + int ci, cj, ei; + int cmp; + + ci = cj = ei = 0; + while (ci < cmds->cnt && ei < excludes->cnt) { + cmp = strcmp(cmds->names[ci]->name, excludes->names[ei]->name); + if (cmp < 0) + cmds->names[cj++] = cmds->names[ci++]; + else if (cmp == 0) + ci++, ei++; + else if (cmp > 0) + ei++; + } + + while (ci < cmds->cnt) + cmds->names[cj++] = cmds->names[ci++]; + + cmds->cnt = cj; +} + +static void pretty_print_string_list(struct cmdnames *cmds, int longest) +{ + int cols = 1, rows; + int space = longest + 1; /* min 1 SP between words */ + int max_cols = term_columns() - 1; /* don't print *on* the edge */ + int i, j; + + if (space < max_cols) + cols = max_cols / space; + rows = (cmds->cnt + cols - 1) / cols; + + for (i = 0; i < rows; i++) { + printf(" "); + + for (j = 0; j < cols; j++) { + int n = j * rows + i; + int size = space; + if (n >= cmds->cnt) + break; + if (j == cols-1 || n + rows >= cmds->cnt) + size = 1; + printf("%-*s", size, cmds->names[n]->name); + } + putchar('\n'); + } +} + +static int is_executable(const char *name) +{ + struct stat st; + + if (stat(name, &st) || /* stat, not lstat */ + !S_ISREG(st.st_mode)) + return 0; + +#ifdef __MINGW32__ + /* cannot trust the executable bit, peek into the file instead */ + char buf[3] = { 0 }; + int n; + int fd = open(name, O_RDONLY); + st.st_mode &= ~S_IXUSR; + if (fd >= 0) { + n = read(fd, buf, 2); + if (n == 2) + /* DOS executables start with "MZ" */ + if (!strcmp(buf, "#!") || !strcmp(buf, "MZ")) + st.st_mode |= S_IXUSR; + close(fd); + } +#endif + return st.st_mode & S_IXUSR; +} + +static void list_commands_in_dir(struct cmdnames *cmds, + const char *path, + const char *prefix) +{ + int prefix_len; + DIR *dir = opendir(path); + struct dirent *de; + struct strbuf buf = STRBUF_INIT; + int len; + + if (!dir) + return; + if (!prefix) + prefix = "perf-"; + prefix_len = strlen(prefix); + + strbuf_addf(&buf, "%s/", path); + len = buf.len; + + while ((de = readdir(dir)) != NULL) { + int entlen; + + if (prefixcmp(de->d_name, prefix)) + continue; + + strbuf_setlen(&buf, len); + strbuf_addstr(&buf, de->d_name); + if (!is_executable(buf.buf)) + continue; + + entlen = strlen(de->d_name) - prefix_len; + if (has_extension(de->d_name, ".exe")) + entlen -= 4; + + add_cmdname(cmds, de->d_name + prefix_len, entlen); + } + closedir(dir); + strbuf_release(&buf); +} + +void load_command_list(const char *prefix, + struct cmdnames *main_cmds, + struct cmdnames *other_cmds) +{ + const char *env_path = getenv("PATH"); + const char *exec_path = perf_exec_path(); + + if (exec_path) { + list_commands_in_dir(main_cmds, exec_path, prefix); + qsort(main_cmds->names, main_cmds->cnt, + sizeof(*main_cmds->names), cmdname_compare); + uniq(main_cmds); + } + + if (env_path) { + char *paths, *path, *colon; + path = paths = strdup(env_path); + while (1) { + if ((colon = strchr(path, PATH_SEP))) + *colon = 0; + if (!exec_path || strcmp(path, exec_path)) + list_commands_in_dir(other_cmds, path, prefix); + + if (!colon) + break; + path = colon + 1; + } + free(paths); + + qsort(other_cmds->names, other_cmds->cnt, + sizeof(*other_cmds->names), cmdname_compare); + uniq(other_cmds); + } + exclude_cmds(other_cmds, main_cmds); +} + +void list_commands(const char *title, struct cmdnames *main_cmds, + struct cmdnames *other_cmds) +{ + int i, longest = 0; + + for (i = 0; i < main_cmds->cnt; i++) + if (longest < main_cmds->names[i]->len) + longest = main_cmds->names[i]->len; + for (i = 0; i < other_cmds->cnt; i++) + if (longest < other_cmds->names[i]->len) + longest = other_cmds->names[i]->len; + + if (main_cmds->cnt) { + const char *exec_path = perf_exec_path(); + printf("available %s in '%s'\n", title, exec_path); + printf("----------------"); + mput_char('-', strlen(title) + strlen(exec_path)); + putchar('\n'); + pretty_print_string_list(main_cmds, longest); + putchar('\n'); + } + + if (other_cmds->cnt) { + printf("%s available from elsewhere on your $PATH\n", title); + printf("---------------------------------------"); + mput_char('-', strlen(title)); + putchar('\n'); + pretty_print_string_list(other_cmds, longest); + putchar('\n'); + } +} + +int is_in_cmdlist(struct cmdnames *c, const char *s) +{ + int i; + for (i = 0; i < c->cnt; i++) + if (!strcmp(s, c->names[i]->name)) + return 1; + return 0; +} + +static int autocorrect; +static struct cmdnames aliases; + +static int perf_unknown_cmd_config(const char *var, const char *value, void *cb) +{ + if (!strcmp(var, "help.autocorrect")) + autocorrect = perf_config_int(var,value); + /* Also use aliases for command lookup */ + if (!prefixcmp(var, "alias.")) + add_cmdname(&aliases, var + 6, strlen(var + 6)); + + return perf_default_config(var, value, cb); +} + +static int levenshtein_compare(const void *p1, const void *p2) +{ + const struct cmdname *const *c1 = p1, *const *c2 = p2; + const char *s1 = (*c1)->name, *s2 = (*c2)->name; + int l1 = (*c1)->len; + int l2 = (*c2)->len; + return l1 != l2 ? l1 - l2 : strcmp(s1, s2); +} + +static void add_cmd_list(struct cmdnames *cmds, struct cmdnames *old) +{ + int i; + ALLOC_GROW(cmds->names, cmds->cnt + old->cnt, cmds->alloc); + + for (i = 0; i < old->cnt; i++) + cmds->names[cmds->cnt++] = old->names[i]; + free(old->names); + old->cnt = 0; + old->names = NULL; +} + +const char *help_unknown_cmd(const char *cmd) +{ + int i, n = 0, best_similarity = 0; + struct cmdnames main_cmds, other_cmds; + + memset(&main_cmds, 0, sizeof(main_cmds)); + memset(&other_cmds, 0, sizeof(main_cmds)); + memset(&aliases, 0, sizeof(aliases)); + + perf_config(perf_unknown_cmd_config, NULL); + + load_command_list("perf-", &main_cmds, &other_cmds); + + add_cmd_list(&main_cmds, &aliases); + add_cmd_list(&main_cmds, &other_cmds); + qsort(main_cmds.names, main_cmds.cnt, + sizeof(main_cmds.names), cmdname_compare); + uniq(&main_cmds); + + if (main_cmds.cnt) { + /* This reuses cmdname->len for similarity index */ + for (i = 0; i < main_cmds.cnt; ++i) + main_cmds.names[i]->len = + levenshtein(cmd, main_cmds.names[i]->name, 0, 2, 1, 4); + + qsort(main_cmds.names, main_cmds.cnt, + sizeof(*main_cmds.names), levenshtein_compare); + + best_similarity = main_cmds.names[0]->len; + n = 1; + while (n < main_cmds.cnt && best_similarity == main_cmds.names[n]->len) + ++n; + } + + if (autocorrect && n == 1) { + const char *assumed = main_cmds.names[0]->name; + + main_cmds.names[0] = NULL; + clean_cmdnames(&main_cmds); + fprintf(stderr, "WARNING: You called a Git program named '%s', " + "which does not exist.\n" + "Continuing under the assumption that you meant '%s'\n", + cmd, assumed); + if (autocorrect > 0) { + fprintf(stderr, "in %0.1f seconds automatically...\n", + (float)autocorrect/10.0); + poll(NULL, 0, autocorrect * 100); + } + return assumed; + } + + fprintf(stderr, "perf: '%s' is not a perf-command. See 'perf --help'.\n", cmd); + + if (main_cmds.cnt && best_similarity < 6) { + fprintf(stderr, "\nDid you mean %s?\n", + n < 2 ? "this": "one of these"); + + for (i = 0; i < n; i++) + fprintf(stderr, "\t%s\n", main_cmds.names[i]->name); + } + + exit(1); +} + +int cmd_version(int argc, const char **argv, const char *prefix) +{ + printf("perf version %s\n", perf_version_string); + return 0; +} diff --git a/tools/perf/util/help.h b/tools/perf/util/help.h new file mode 100644 index 0000000..56bc154 --- /dev/null +++ b/tools/perf/util/help.h @@ -0,0 +1,29 @@ +#ifndef HELP_H +#define HELP_H + +struct cmdnames { + int alloc; + int cnt; + struct cmdname { + size_t len; /* also used for similarity index in help.c */ + char name[FLEX_ARRAY]; + } **names; +}; + +static inline void mput_char(char c, unsigned int num) +{ + while(num--) + putchar(c); +} + +void load_command_list(const char *prefix, + struct cmdnames *main_cmds, + struct cmdnames *other_cmds); +void add_cmdname(struct cmdnames *cmds, const char *name, int len); +/* Here we require that excludes is a sorted list. */ +void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes); +int is_in_cmdlist(struct cmdnames *c, const char *s); +void list_commands(const char *title, struct cmdnames *main_cmds, + struct cmdnames *other_cmds); + +#endif /* HELP_H */ diff --git a/tools/perf/util/levenshtein.c b/tools/perf/util/levenshtein.c new file mode 100644 index 0000000..e521d15 --- /dev/null +++ b/tools/perf/util/levenshtein.c @@ -0,0 +1,84 @@ +#include "cache.h" +#include "levenshtein.h" + +/* + * This function implements the Damerau-Levenshtein algorithm to + * calculate a distance between strings. + * + * Basically, it says how many letters need to be swapped, substituted, + * deleted from, or added to string1, at least, to get string2. + * + * The idea is to build a distance matrix for the substrings of both + * strings. To avoid a large space complexity, only the last three rows + * are kept in memory (if swaps had the same or higher cost as one deletion + * plus one insertion, only two rows would be needed). + * + * At any stage, "i + 1" denotes the length of the current substring of + * string1 that the distance is calculated for. + * + * row2 holds the current row, row1 the previous row (i.e. for the substring + * of string1 of length "i"), and row0 the row before that. + * + * In other words, at the start of the big loop, row2[j + 1] contains the + * Damerau-Levenshtein distance between the substring of string1 of length + * "i" and the substring of string2 of length "j + 1". + * + * All the big loop does is determine the partial minimum-cost paths. + * + * It does so by calculating the costs of the path ending in characters + * i (in string1) and j (in string2), respectively, given that the last + * operation is a substition, a swap, a deletion, or an insertion. + * + * This implementation allows the costs to be weighted: + * + * - w (as in "sWap") + * - s (as in "Substitution") + * - a (for insertion, AKA "Add") + * - d (as in "Deletion") + * + * Note that this algorithm calculates a distance _iff_ d == a. + */ +int levenshtein(const char *string1, const char *string2, + int w, int s, int a, int d) +{ + int len1 = strlen(string1), len2 = strlen(string2); + int *row0 = malloc(sizeof(int) * (len2 + 1)); + int *row1 = malloc(sizeof(int) * (len2 + 1)); + int *row2 = malloc(sizeof(int) * (len2 + 1)); + int i, j; + + for (j = 0; j <= len2; j++) + row1[j] = j * a; + for (i = 0; i < len1; i++) { + int *dummy; + + row2[0] = (i + 1) * d; + for (j = 0; j < len2; j++) { + /* substitution */ + row2[j + 1] = row1[j] + s * (string1[i] != string2[j]); + /* swap */ + if (i > 0 && j > 0 && string1[i - 1] == string2[j] && + string1[i] == string2[j - 1] && + row2[j + 1] > row0[j - 1] + w) + row2[j + 1] = row0[j - 1] + w; + /* deletion */ + if (row2[j + 1] > row1[j + 1] + d) + row2[j + 1] = row1[j + 1] + d; + /* insertion */ + if (row2[j + 1] > row2[j] + a) + row2[j + 1] = row2[j] + a; + } + + dummy = row0; + row0 = row1; + row1 = row2; + row2 = dummy; + } + + i = row1[len2]; + free(row0); + free(row1); + free(row2); + + return i; +} diff --git a/tools/perf/util/levenshtein.h b/tools/perf/util/levenshtein.h new file mode 100644 index 0000000..0173abe --- /dev/null +++ b/tools/perf/util/levenshtein.h @@ -0,0 +1,8 @@ +#ifndef LEVENSHTEIN_H +#define LEVENSHTEIN_H + +int levenshtein(const char *string1, const char *string2, + int swap_penalty, int substition_penalty, + int insertion_penalty, int deletion_penalty); + +#endif diff --git a/tools/perf/util/list.h b/tools/perf/util/list.h new file mode 100644 index 0000000..e2548e8 --- /dev/null +++ b/tools/perf/util/list.h @@ -0,0 +1,603 @@ +#ifndef _LINUX_LIST_H +#define _LINUX_LIST_H +/* + Copyright (C) Cast of dozens, comes from the Linux kernel + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. +*/ + +#include + +/* + * These are non-NULL pointers that will result in page faults + * under normal circumstances, used to verify that nobody uses + * non-initialized list entries. + */ +#define LIST_POISON1 ((void *)0x00100100) +#define LIST_POISON2 ((void *)0x00200200) + +/** + * container_of - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + +/* + * Simple doubly linked list implementation. + * + * Some of the internal functions ("__xxx") are useful when + * manipulating whole lists rather than single entries, as + * sometimes we already know the next/prev entries and we can + * generate better code by using them directly rather than + * using the generic single-entry routines. + */ + +struct list_head { + struct list_head *next, *prev; +}; + +#define LIST_HEAD_INIT(name) { &(name), &(name) } + +#define LIST_HEAD(name) \ + struct list_head name = LIST_HEAD_INIT(name) + +static inline void INIT_LIST_HEAD(struct list_head *list) +{ + list->next = list; + list->prev = list; +} + +/* + * Insert a new entry between two known consecutive entries. + * + * This is only for internal list manipulation where we know + * the prev/next entries already! + */ +static inline void __list_add(struct list_head *new, + struct list_head *prev, + struct list_head *next) +{ + next->prev = new; + new->next = next; + new->prev = prev; + prev->next = new; +} + +/** + * list_add - add a new entry + * @new: new entry to be added + * @head: list head to add it after + * + * Insert a new entry after the specified head. + * This is good for implementing stacks. + */ +static inline void list_add(struct list_head *new, struct list_head *head) +{ + __list_add(new, head, head->next); +} + +/** + * list_add_tail - add a new entry + * @new: new entry to be added + * @head: list head to add it before + * + * Insert a new entry before the specified head. + * This is useful for implementing queues. + */ +static inline void list_add_tail(struct list_head *new, struct list_head *head) +{ + __list_add(new, head->prev, head); +} + +/* + * Delete a list entry by making the prev/next entries + * point to each other. + * + * This is only for internal list manipulation where we know + * the prev/next entries already! + */ +static inline void __list_del(struct list_head * prev, struct list_head * next) +{ + next->prev = prev; + prev->next = next; +} + +/** + * list_del - deletes entry from list. + * @entry: the element to delete from the list. + * Note: list_empty on entry does not return true after this, the entry is + * in an undefined state. + */ +static inline void list_del(struct list_head *entry) +{ + __list_del(entry->prev, entry->next); + entry->next = LIST_POISON1; + entry->prev = LIST_POISON2; +} + +/** + * list_del_range - deletes range of entries from list. + * @beging: first element in the range to delete from the list. + * @beging: first element in the range to delete from the list. + * Note: list_empty on the range of entries does not return true after this, + * the entries is in an undefined state. + */ +static inline void list_del_range(struct list_head *begin, + struct list_head *end) +{ + begin->prev->next = end->next; + end->next->prev = begin->prev; +} + +/** + * list_replace - replace old entry by new one + * @old : the element to be replaced + * @new : the new element to insert + * Note: if 'old' was empty, it will be overwritten. + */ +static inline void list_replace(struct list_head *old, + struct list_head *new) +{ + new->next = old->next; + new->next->prev = new; + new->prev = old->prev; + new->prev->next = new; +} + +static inline void list_replace_init(struct list_head *old, + struct list_head *new) +{ + list_replace(old, new); + INIT_LIST_HEAD(old); +} + +/** + * list_del_init - deletes entry from list and reinitialize it. + * @entry: the element to delete from the list. + */ +static inline void list_del_init(struct list_head *entry) +{ + __list_del(entry->prev, entry->next); + INIT_LIST_HEAD(entry); +} + +/** + * list_move - delete from one list and add as another's head + * @list: the entry to move + * @head: the head that will precede our entry + */ +static inline void list_move(struct list_head *list, struct list_head *head) +{ + __list_del(list->prev, list->next); + list_add(list, head); +} + +/** + * list_move_tail - delete from one list and add as another's tail + * @list: the entry to move + * @head: the head that will follow our entry + */ +static inline void list_move_tail(struct list_head *list, + struct list_head *head) +{ + __list_del(list->prev, list->next); + list_add_tail(list, head); +} + +/** + * list_is_last - tests whether @list is the last entry in list @head + * @list: the entry to test + * @head: the head of the list + */ +static inline int list_is_last(const struct list_head *list, + const struct list_head *head) +{ + return list->next == head; +} + +/** + * list_empty - tests whether a list is empty + * @head: the list to test. + */ +static inline int list_empty(const struct list_head *head) +{ + return head->next == head; +} + +/** + * list_empty_careful - tests whether a list is empty and not being modified + * @head: the list to test + * + * Description: + * tests whether a list is empty _and_ checks that no other CPU might be + * in the process of modifying either member (next or prev) + * + * NOTE: using list_empty_careful() without synchronization + * can only be safe if the only activity that can happen + * to the list entry is list_del_init(). Eg. it cannot be used + * if another CPU could re-list_add() it. + */ +static inline int list_empty_careful(const struct list_head *head) +{ + struct list_head *next = head->next; + return (next == head) && (next == head->prev); +} + +static inline void __list_splice(struct list_head *list, + struct list_head *head) +{ + struct list_head *first = list->next; + struct list_head *last = list->prev; + struct list_head *at = head->next; + + first->prev = head; + head->next = first; + + last->next = at; + at->prev = last; +} + +/** + * list_splice - join two lists + * @list: the new list to add. + * @head: the place to add it in the first list. + */ +static inline void list_splice(struct list_head *list, struct list_head *head) +{ + if (!list_empty(list)) + __list_splice(list, head); +} + +/** + * list_splice_init - join two lists and reinitialise the emptied list. + * @list: the new list to add. + * @head: the place to add it in the first list. + * + * The list at @list is reinitialised + */ +static inline void list_splice_init(struct list_head *list, + struct list_head *head) +{ + if (!list_empty(list)) { + __list_splice(list, head); + INIT_LIST_HEAD(list); + } +} + +/** + * list_entry - get the struct for this entry + * @ptr: the &struct list_head pointer. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + */ +#define list_entry(ptr, type, member) \ + container_of(ptr, type, member) + +/** + * list_first_entry - get the first element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * Note, that list is expected to be not empty. + */ +#define list_first_entry(ptr, type, member) \ + list_entry((ptr)->next, type, member) + +/** + * list_for_each - iterate over a list + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + */ +#define list_for_each(pos, head) \ + for (pos = (head)->next; pos != (head); \ + pos = pos->next) + +/** + * __list_for_each - iterate over a list + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + * + * This variant differs from list_for_each() in that it's the + * simplest possible list iteration code, no prefetching is done. + * Use this for code that knows the list to be very short (empty + * or 1 entry) most of the time. + */ +#define __list_for_each(pos, head) \ + for (pos = (head)->next; pos != (head); pos = pos->next) + +/** + * list_for_each_prev - iterate over a list backwards + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + */ +#define list_for_each_prev(pos, head) \ + for (pos = (head)->prev; pos != (head); \ + pos = pos->prev) + +/** + * list_for_each_safe - iterate over a list safe against removal of list entry + * @pos: the &struct list_head to use as a loop cursor. + * @n: another &struct list_head to use as temporary storage + * @head: the head for your list. + */ +#define list_for_each_safe(pos, n, head) \ + for (pos = (head)->next, n = pos->next; pos != (head); \ + pos = n, n = pos->next) + +/** + * list_for_each_entry - iterate over list of given type + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry(pos, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_for_each_entry_reverse - iterate backwards over list of given type. + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry_reverse(pos, head, member) \ + for (pos = list_entry((head)->prev, typeof(*pos), member); \ + &pos->member != (head); \ + pos = list_entry(pos->member.prev, typeof(*pos), member)) + +/** + * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue + * @pos: the type * to use as a start point + * @head: the head of the list + * @member: the name of the list_struct within the struct. + * + * Prepares a pos entry for use as a start point in list_for_each_entry_continue. + */ +#define list_prepare_entry(pos, head, member) \ + ((pos) ? : list_entry(head, typeof(*pos), member)) + +/** + * list_for_each_entry_continue - continue iteration over list of given type + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Continue to iterate over list of given type, continuing after + * the current position. + */ +#define list_for_each_entry_continue(pos, head, member) \ + for (pos = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_for_each_entry_from - iterate over list of given type from the current point + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type, continuing from current position. + */ +#define list_for_each_entry_from(pos, head, member) \ + for (; &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry_safe(pos, n, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member), \ + n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_safe_continue + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type, continuing after current point, + * safe against removal of list entry. + */ +#define list_for_each_entry_safe_continue(pos, n, head, member) \ + for (pos = list_entry(pos->member.next, typeof(*pos), member), \ + n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_safe_from + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type from current point, safe against + * removal of list entry. + */ +#define list_for_each_entry_safe_from(pos, n, head, member) \ + for (n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_safe_reverse + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate backwards over list of given type, safe against removal + * of list entry. + */ +#define list_for_each_entry_safe_reverse(pos, n, head, member) \ + for (pos = list_entry((head)->prev, typeof(*pos), member), \ + n = list_entry(pos->member.prev, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.prev, typeof(*n), member)) + +/* + * Double linked lists with a single pointer list head. + * Mostly useful for hash tables where the two pointer list head is + * too wasteful. + * You lose the ability to access the tail in O(1). + */ + +struct hlist_head { + struct hlist_node *first; +}; + +struct hlist_node { + struct hlist_node *next, **pprev; +}; + +#define HLIST_HEAD_INIT { .first = NULL } +#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL } +#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL) +static inline void INIT_HLIST_NODE(struct hlist_node *h) +{ + h->next = NULL; + h->pprev = NULL; +} + +static inline int hlist_unhashed(const struct hlist_node *h) +{ + return !h->pprev; +} + +static inline int hlist_empty(const struct hlist_head *h) +{ + return !h->first; +} + +static inline void __hlist_del(struct hlist_node *n) +{ + struct hlist_node *next = n->next; + struct hlist_node **pprev = n->pprev; + *pprev = next; + if (next) + next->pprev = pprev; +} + +static inline void hlist_del(struct hlist_node *n) +{ + __hlist_del(n); + n->next = LIST_POISON1; + n->pprev = LIST_POISON2; +} + +static inline void hlist_del_init(struct hlist_node *n) +{ + if (!hlist_unhashed(n)) { + __hlist_del(n); + INIT_HLIST_NODE(n); + } +} + +static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) +{ + struct hlist_node *first = h->first; + n->next = first; + if (first) + first->pprev = &n->next; + h->first = n; + n->pprev = &h->first; +} + +/* next must be != NULL */ +static inline void hlist_add_before(struct hlist_node *n, + struct hlist_node *next) +{ + n->pprev = next->pprev; + n->next = next; + next->pprev = &n->next; + *(n->pprev) = n; +} + +static inline void hlist_add_after(struct hlist_node *n, + struct hlist_node *next) +{ + next->next = n->next; + n->next = next; + next->pprev = &n->next; + + if(next->next) + next->next->pprev = &next->next; +} + +#define hlist_entry(ptr, type, member) container_of(ptr,type,member) + +#define hlist_for_each(pos, head) \ + for (pos = (head)->first; pos; \ + pos = pos->next) + +#define hlist_for_each_safe(pos, n, head) \ + for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \ + pos = n) + +/** + * hlist_for_each_entry - iterate over list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry(tpos, pos, head, member) \ + for (pos = (head)->first; \ + pos && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_continue - iterate over a hlist continuing after current point + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry_continue(tpos, pos, member) \ + for (pos = (pos)->next; \ + pos && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_from - iterate over a hlist continuing from current point + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry_from(tpos, pos, member) \ + for (; pos && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @n: another &struct hlist_node to use as temporary storage + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \ + for (pos = (head)->first; \ + pos && ({ n = pos->next; 1; }) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = n) + +#endif diff --git a/tools/perf/util/pager.c b/tools/perf/util/pager.c new file mode 100644 index 0000000..a28bcca --- /dev/null +++ b/tools/perf/util/pager.c @@ -0,0 +1,99 @@ +#include "cache.h" +#include "run-command.h" +#include "sigchain.h" + +/* + * This is split up from the rest of git so that we can do + * something different on Windows. + */ + +static int spawned_pager; + +#ifndef __MINGW32__ +static void pager_preexec(void) +{ + /* + * Work around bug in "less" by not starting it until we + * have real input + */ + fd_set in; + + FD_ZERO(&in); + FD_SET(0, &in); + select(1, &in, NULL, &in, NULL); + + setenv("LESS", "FRSX", 0); +} +#endif + +static const char *pager_argv[] = { "sh", "-c", NULL, NULL }; +static struct child_process pager_process; + +static void wait_for_pager(void) +{ + fflush(stdout); + fflush(stderr); + /* signal EOF to pager */ + close(1); + close(2); + finish_command(&pager_process); +} + +static void wait_for_pager_signal(int signo) +{ + wait_for_pager(); + sigchain_pop(signo); + raise(signo); +} + +void setup_pager(void) +{ + const char *pager = getenv("PERF_PAGER"); + + if (!isatty(1)) + return; + if (!pager) { + if (!pager_program) + perf_config(perf_default_config, NULL); + pager = pager_program; + } + if (!pager) + pager = getenv("PAGER"); + if (!pager) + pager = "less"; + else if (!*pager || !strcmp(pager, "cat")) + return; + + spawned_pager = 1; /* means we are emitting to terminal */ + + /* spawn the pager */ + pager_argv[2] = pager; + pager_process.argv = pager_argv; + pager_process.in = -1; +#ifndef __MINGW32__ + pager_process.preexec_cb = pager_preexec; +#endif + if (start_command(&pager_process)) + return; + + /* original process continues, but writes to the pipe */ + dup2(pager_process.in, 1); + if (isatty(2)) + dup2(pager_process.in, 2); + close(pager_process.in); + + /* this makes sure that the parent terminates after the pager */ + sigchain_push_common(wait_for_pager_signal); + atexit(wait_for_pager); +} + +int pager_in_use(void) +{ + const char *env; + + if (spawned_pager) + return 1; + + env = getenv("PERF_PAGER_IN_USE"); + return env ? perf_config_bool("PERF_PAGER_IN_USE", env) : 0; +} diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c new file mode 100644 index 0000000..5a72586 --- /dev/null +++ b/tools/perf/util/parse-events.c @@ -0,0 +1,316 @@ + +#include "../perf.h" +#include "util.h" +#include "parse-options.h" +#include "parse-events.h" +#include "exec_cmd.h" +#include "string.h" + +extern char *strcasestr(const char *haystack, const char *needle); + +int nr_counters; + +struct perf_counter_attr attrs[MAX_COUNTERS]; + +struct event_symbol { + __u8 type; + __u64 config; + char *symbol; +}; + +#define C(x, y) .type = PERF_TYPE_##x, .config = PERF_COUNT_##y +#define CR(x, y) .type = PERF_TYPE_##x, .config = y + +static struct event_symbol event_symbols[] = { + { C(HARDWARE, HW_CPU_CYCLES), "cpu-cycles", }, + { C(HARDWARE, HW_CPU_CYCLES), "cycles", }, + { C(HARDWARE, HW_INSTRUCTIONS), "instructions", }, + { C(HARDWARE, HW_CACHE_REFERENCES), "cache-references", }, + { C(HARDWARE, HW_CACHE_MISSES), "cache-misses", }, + { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branch-instructions", }, + { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branches", }, + { C(HARDWARE, HW_BRANCH_MISSES), "branch-misses", }, + { C(HARDWARE, HW_BUS_CYCLES), "bus-cycles", }, + + { C(SOFTWARE, SW_CPU_CLOCK), "cpu-clock", }, + { C(SOFTWARE, SW_TASK_CLOCK), "task-clock", }, + { C(SOFTWARE, SW_PAGE_FAULTS), "page-faults", }, + { C(SOFTWARE, SW_PAGE_FAULTS), "faults", }, + { C(SOFTWARE, SW_PAGE_FAULTS_MIN), "minor-faults", }, + { C(SOFTWARE, SW_PAGE_FAULTS_MAJ), "major-faults", }, + { C(SOFTWARE, SW_CONTEXT_SWITCHES), "context-switches", }, + { C(SOFTWARE, SW_CONTEXT_SWITCHES), "cs", }, + { C(SOFTWARE, SW_CPU_MIGRATIONS), "cpu-migrations", }, + { C(SOFTWARE, SW_CPU_MIGRATIONS), "migrations", }, +}; + +#define __PERF_COUNTER_FIELD(config, name) \ + ((config & PERF_COUNTER_##name##_MASK) >> PERF_COUNTER_##name##_SHIFT) + +#define PERF_COUNTER_RAW(config) __PERF_COUNTER_FIELD(config, RAW) +#define PERF_COUNTER_CONFIG(config) __PERF_COUNTER_FIELD(config, CONFIG) +#define PERF_COUNTER_TYPE(config) __PERF_COUNTER_FIELD(config, TYPE) +#define PERF_COUNTER_ID(config) __PERF_COUNTER_FIELD(config, EVENT) + +static char *hw_event_names[] = { + "cycles", + "instructions", + "cache-references", + "cache-misses", + "branches", + "branch-misses", + "bus-cycles", +}; + +static char *sw_event_names[] = { + "cpu-clock-ticks", + "task-clock-ticks", + "page-faults", + "context-switches", + "CPU-migrations", + "minor-faults", + "major-faults", +}; + +#define MAX_ALIASES 8 + +static char *hw_cache [][MAX_ALIASES] = { + { "L1-data" , "l1-d", "l1d" }, + { "L1-instruction" , "l1-i", "l1i" }, + { "L2" , "l2" }, + { "Data-TLB" , "dtlb", "d-tlb" }, + { "Instruction-TLB" , "itlb", "i-tlb" }, + { "Branch" , "bpu" , "btb", "bpc" }, +}; + +static char *hw_cache_op [][MAX_ALIASES] = { + { "Load" , "read" }, + { "Store" , "write" }, + { "Prefetch" , "speculative-read", "speculative-load" }, +}; + +static char *hw_cache_result [][MAX_ALIASES] = { + { "Reference" , "ops", "access" }, + { "Miss" }, +}; + +char *event_name(int counter) +{ + __u64 config = attrs[counter].config; + int type = attrs[counter].type; + static char buf[32]; + + if (attrs[counter].type == PERF_TYPE_RAW) { + sprintf(buf, "raw 0x%llx", config); + return buf; + } + + switch (type) { + case PERF_TYPE_HARDWARE: + if (config < PERF_COUNT_HW_MAX) + return hw_event_names[config]; + return "unknown-hardware"; + + case PERF_TYPE_HW_CACHE: { + __u8 cache_type, cache_op, cache_result; + static char name[100]; + + cache_type = (config >> 0) & 0xff; + if (cache_type > PERF_COUNT_HW_CACHE_MAX) + return "unknown-ext-hardware-cache-type"; + + cache_op = (config >> 8) & 0xff; + if (cache_op > PERF_COUNT_HW_CACHE_OP_MAX) + return "unknown-ext-hardware-cache-op"; + + cache_result = (config >> 16) & 0xff; + if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX) + return "unknown-ext-hardware-cache-result"; + + sprintf(name, "%s-Cache-%s-%ses", + hw_cache[cache_type][0], + hw_cache_op[cache_op][0], + hw_cache_result[cache_result][0]); + + return name; + } + + case PERF_TYPE_SOFTWARE: + if (config < PERF_COUNT_SW_MAX) + return sw_event_names[config]; + return "unknown-software"; + + default: + break; + } + + return "unknown"; +} + +static int parse_aliases(const char *str, char *names[][MAX_ALIASES], int size) +{ + int i, j; + + for (i = 0; i < size; i++) { + for (j = 0; j < MAX_ALIASES; j++) { + if (!names[i][j]) + break; + if (strcasestr(str, names[i][j])) + return i; + } + } + + return -1; +} + +static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr) +{ + int cache_type = -1, cache_op = 0, cache_result = 0; + + cache_type = parse_aliases(str, hw_cache, PERF_COUNT_HW_CACHE_MAX); + /* + * No fallback - if we cannot get a clear cache type + * then bail out: + */ + if (cache_type == -1) + return -EINVAL; + + cache_op = parse_aliases(str, hw_cache_op, PERF_COUNT_HW_CACHE_OP_MAX); + /* + * Fall back to reads: + */ + if (cache_op == -1) + cache_op = PERF_COUNT_HW_CACHE_OP_READ; + + cache_result = parse_aliases(str, hw_cache_result, + PERF_COUNT_HW_CACHE_RESULT_MAX); + /* + * Fall back to accesses: + */ + if (cache_result == -1) + cache_result = PERF_COUNT_HW_CACHE_RESULT_ACCESS; + + attr->config = cache_type | (cache_op << 8) | (cache_result << 16); + attr->type = PERF_TYPE_HW_CACHE; + + return 0; +} + +/* + * Each event can have multiple symbolic names. + * Symbolic names are (almost) exactly matched. + */ +static int parse_event_symbols(const char *str, struct perf_counter_attr *attr) +{ + __u64 config, id; + int type; + unsigned int i; + const char *sep, *pstr; + + if (str[0] == 'r' && hex2u64(str + 1, &config) > 0) { + attr->type = PERF_TYPE_RAW; + attr->config = config; + + return 0; + } + + pstr = str; + sep = strchr(pstr, ':'); + if (sep) { + type = atoi(pstr); + pstr = sep + 1; + id = atoi(pstr); + sep = strchr(pstr, ':'); + if (sep) { + pstr = sep + 1; + if (strchr(pstr, 'k')) + attr->exclude_user = 1; + if (strchr(pstr, 'u')) + attr->exclude_kernel = 1; + } + attr->type = type; + attr->config = id; + + return 0; + } + + for (i = 0; i < ARRAY_SIZE(event_symbols); i++) { + if (!strncmp(str, event_symbols[i].symbol, + strlen(event_symbols[i].symbol))) { + + attr->type = event_symbols[i].type; + attr->config = event_symbols[i].config; + + return 0; + } + } + + return parse_generic_hw_symbols(str, attr); +} + +int parse_events(const struct option *opt, const char *str, int unset) +{ + struct perf_counter_attr attr; + int ret; + + memset(&attr, 0, sizeof(attr)); +again: + if (nr_counters == MAX_COUNTERS) + return -1; + + ret = parse_event_symbols(str, &attr); + if (ret < 0) + return ret; + + attrs[nr_counters] = attr; + nr_counters++; + + str = strstr(str, ","); + if (str) { + str++; + goto again; + } + + return 0; +} + +static const char * const event_type_descriptors[] = { + "", + "Hardware event", + "Software event", + "Tracepoint event", + "Hardware cache event", +}; + +/* + * Print the help text for the event symbols: + */ +void print_events(void) +{ + struct event_symbol *syms = event_symbols; + unsigned int i, type, prev_type = -1; + + fprintf(stderr, "\n"); + fprintf(stderr, "List of pre-defined events (to be used in -e):\n"); + + for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) { + type = syms->type + 1; + if (type > ARRAY_SIZE(event_type_descriptors)) + type = 0; + + if (type != prev_type) + fprintf(stderr, "\n"); + + fprintf(stderr, " %-30s [%s]\n", syms->symbol, + event_type_descriptors[type]); + + prev_type = type; + } + + fprintf(stderr, "\n"); + fprintf(stderr, " %-30s [raw hardware event descriptor]\n", + "rNNN"); + fprintf(stderr, "\n"); + + exit(129); +} diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h new file mode 100644 index 0000000..e3d5529 --- /dev/null +++ b/tools/perf/util/parse-events.h @@ -0,0 +1,17 @@ + +/* + * Parse symbolic events/counts passed in as options: + */ + +extern int nr_counters; + +extern struct perf_counter_attr attrs[MAX_COUNTERS]; + +extern char *event_name(int ctr); + +extern int parse_events(const struct option *opt, const char *str, int unset); + +#define EVENTS_HELP_MAX (128*1024) + +extern void print_events(void); + diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c new file mode 100644 index 0000000..b3affb1 --- /dev/null +++ b/tools/perf/util/parse-options.c @@ -0,0 +1,508 @@ +#include "util.h" +#include "parse-options.h" +#include "cache.h" + +#define OPT_SHORT 1 +#define OPT_UNSET 2 + +static int opterror(const struct option *opt, const char *reason, int flags) +{ + if (flags & OPT_SHORT) + return error("switch `%c' %s", opt->short_name, reason); + if (flags & OPT_UNSET) + return error("option `no-%s' %s", opt->long_name, reason); + return error("option `%s' %s", opt->long_name, reason); +} + +static int get_arg(struct parse_opt_ctx_t *p, const struct option *opt, + int flags, const char **arg) +{ + if (p->opt) { + *arg = p->opt; + p->opt = NULL; + } else if (p->argc == 1 && (opt->flags & PARSE_OPT_LASTARG_DEFAULT)) { + *arg = (const char *)opt->defval; + } else if (p->argc > 1) { + p->argc--; + *arg = *++p->argv; + } else + return opterror(opt, "requires a value", flags); + return 0; +} + +static int get_value(struct parse_opt_ctx_t *p, + const struct option *opt, int flags) +{ + const char *s, *arg = NULL; + const int unset = flags & OPT_UNSET; + + if (unset && p->opt) + return opterror(opt, "takes no value", flags); + if (unset && (opt->flags & PARSE_OPT_NONEG)) + return opterror(opt, "isn't available", flags); + + if (!(flags & OPT_SHORT) && p->opt) { + switch (opt->type) { + case OPTION_CALLBACK: + if (!(opt->flags & PARSE_OPT_NOARG)) + break; + /* FALLTHROUGH */ + case OPTION_BOOLEAN: + case OPTION_BIT: + case OPTION_SET_INT: + case OPTION_SET_PTR: + return opterror(opt, "takes no value", flags); + default: + break; + } + } + + switch (opt->type) { + case OPTION_BIT: + if (unset) + *(int *)opt->value &= ~opt->defval; + else + *(int *)opt->value |= opt->defval; + return 0; + + case OPTION_BOOLEAN: + *(int *)opt->value = unset ? 0 : *(int *)opt->value + 1; + return 0; + + case OPTION_SET_INT: + *(int *)opt->value = unset ? 0 : opt->defval; + return 0; + + case OPTION_SET_PTR: + *(void **)opt->value = unset ? NULL : (void *)opt->defval; + return 0; + + case OPTION_STRING: + if (unset) + *(const char **)opt->value = NULL; + else if (opt->flags & PARSE_OPT_OPTARG && !p->opt) + *(const char **)opt->value = (const char *)opt->defval; + else + return get_arg(p, opt, flags, (const char **)opt->value); + return 0; + + case OPTION_CALLBACK: + if (unset) + return (*opt->callback)(opt, NULL, 1) ? (-1) : 0; + if (opt->flags & PARSE_OPT_NOARG) + return (*opt->callback)(opt, NULL, 0) ? (-1) : 0; + if (opt->flags & PARSE_OPT_OPTARG && !p->opt) + return (*opt->callback)(opt, NULL, 0) ? (-1) : 0; + if (get_arg(p, opt, flags, &arg)) + return -1; + return (*opt->callback)(opt, arg, 0) ? (-1) : 0; + + case OPTION_INTEGER: + if (unset) { + *(int *)opt->value = 0; + return 0; + } + if (opt->flags & PARSE_OPT_OPTARG && !p->opt) { + *(int *)opt->value = opt->defval; + return 0; + } + if (get_arg(p, opt, flags, &arg)) + return -1; + *(int *)opt->value = strtol(arg, (char **)&s, 10); + if (*s) + return opterror(opt, "expects a numerical value", flags); + return 0; + + case OPTION_LONG: + if (unset) { + *(long *)opt->value = 0; + return 0; + } + if (opt->flags & PARSE_OPT_OPTARG && !p->opt) { + *(long *)opt->value = opt->defval; + return 0; + } + if (get_arg(p, opt, flags, &arg)) + return -1; + *(long *)opt->value = strtol(arg, (char **)&s, 10); + if (*s) + return opterror(opt, "expects a numerical value", flags); + return 0; + + default: + die("should not happen, someone must be hit on the forehead"); + } +} + +static int parse_short_opt(struct parse_opt_ctx_t *p, const struct option *options) +{ + for (; options->type != OPTION_END; options++) { + if (options->short_name == *p->opt) { + p->opt = p->opt[1] ? p->opt + 1 : NULL; + return get_value(p, options, OPT_SHORT); + } + } + return -2; +} + +static int parse_long_opt(struct parse_opt_ctx_t *p, const char *arg, + const struct option *options) +{ + const char *arg_end = strchr(arg, '='); + const struct option *abbrev_option = NULL, *ambiguous_option = NULL; + int abbrev_flags = 0, ambiguous_flags = 0; + + if (!arg_end) + arg_end = arg + strlen(arg); + + for (; options->type != OPTION_END; options++) { + const char *rest; + int flags = 0; + + if (!options->long_name) + continue; + + rest = skip_prefix(arg, options->long_name); + if (options->type == OPTION_ARGUMENT) { + if (!rest) + continue; + if (*rest == '=') + return opterror(options, "takes no value", flags); + if (*rest) + continue; + p->out[p->cpidx++] = arg - 2; + return 0; + } + if (!rest) { + /* abbreviated? */ + if (!strncmp(options->long_name, arg, arg_end - arg)) { +is_abbreviated: + if (abbrev_option) { + /* + * If this is abbreviated, it is + * ambiguous. So when there is no + * exact match later, we need to + * error out. + */ + ambiguous_option = abbrev_option; + ambiguous_flags = abbrev_flags; + } + if (!(flags & OPT_UNSET) && *arg_end) + p->opt = arg_end + 1; + abbrev_option = options; + abbrev_flags = flags; + continue; + } + /* negated and abbreviated very much? */ + if (!prefixcmp("no-", arg)) { + flags |= OPT_UNSET; + goto is_abbreviated; + } + /* negated? */ + if (strncmp(arg, "no-", 3)) + continue; + flags |= OPT_UNSET; + rest = skip_prefix(arg + 3, options->long_name); + /* abbreviated and negated? */ + if (!rest && !prefixcmp(options->long_name, arg + 3)) + goto is_abbreviated; + if (!rest) + continue; + } + if (*rest) { + if (*rest != '=') + continue; + p->opt = rest + 1; + } + return get_value(p, options, flags); + } + + if (ambiguous_option) + return error("Ambiguous option: %s " + "(could be --%s%s or --%s%s)", + arg, + (ambiguous_flags & OPT_UNSET) ? "no-" : "", + ambiguous_option->long_name, + (abbrev_flags & OPT_UNSET) ? "no-" : "", + abbrev_option->long_name); + if (abbrev_option) + return get_value(p, abbrev_option, abbrev_flags); + return -2; +} + +static void check_typos(const char *arg, const struct option *options) +{ + if (strlen(arg) < 3) + return; + + if (!prefixcmp(arg, "no-")) { + error ("did you mean `--%s` (with two dashes ?)", arg); + exit(129); + } + + for (; options->type != OPTION_END; options++) { + if (!options->long_name) + continue; + if (!prefixcmp(options->long_name, arg)) { + error ("did you mean `--%s` (with two dashes ?)", arg); + exit(129); + } + } +} + +void parse_options_start(struct parse_opt_ctx_t *ctx, + int argc, const char **argv, int flags) +{ + memset(ctx, 0, sizeof(*ctx)); + ctx->argc = argc - 1; + ctx->argv = argv + 1; + ctx->out = argv; + ctx->cpidx = ((flags & PARSE_OPT_KEEP_ARGV0) != 0); + ctx->flags = flags; + if ((flags & PARSE_OPT_KEEP_UNKNOWN) && + (flags & PARSE_OPT_STOP_AT_NON_OPTION)) + die("STOP_AT_NON_OPTION and KEEP_UNKNOWN don't go together"); +} + +static int usage_with_options_internal(const char * const *, + const struct option *, int); + +int parse_options_step(struct parse_opt_ctx_t *ctx, + const struct option *options, + const char * const usagestr[]) +{ + int internal_help = !(ctx->flags & PARSE_OPT_NO_INTERNAL_HELP); + + /* we must reset ->opt, unknown short option leave it dangling */ + ctx->opt = NULL; + + for (; ctx->argc; ctx->argc--, ctx->argv++) { + const char *arg = ctx->argv[0]; + + if (*arg != '-' || !arg[1]) { + if (ctx->flags & PARSE_OPT_STOP_AT_NON_OPTION) + break; + ctx->out[ctx->cpidx++] = ctx->argv[0]; + continue; + } + + if (arg[1] != '-') { + ctx->opt = arg + 1; + if (internal_help && *ctx->opt == 'h') + return parse_options_usage(usagestr, options); + switch (parse_short_opt(ctx, options)) { + case -1: + return parse_options_usage(usagestr, options); + case -2: + goto unknown; + } + if (ctx->opt) + check_typos(arg + 1, options); + while (ctx->opt) { + if (internal_help && *ctx->opt == 'h') + return parse_options_usage(usagestr, options); + switch (parse_short_opt(ctx, options)) { + case -1: + return parse_options_usage(usagestr, options); + case -2: + /* fake a short option thing to hide the fact that we may have + * started to parse aggregated stuff + * + * This is leaky, too bad. + */ + ctx->argv[0] = strdup(ctx->opt - 1); + *(char *)ctx->argv[0] = '-'; + goto unknown; + } + } + continue; + } + + if (!arg[2]) { /* "--" */ + if (!(ctx->flags & PARSE_OPT_KEEP_DASHDASH)) { + ctx->argc--; + ctx->argv++; + } + break; + } + + if (internal_help && !strcmp(arg + 2, "help-all")) + return usage_with_options_internal(usagestr, options, 1); + if (internal_help && !strcmp(arg + 2, "help")) + return parse_options_usage(usagestr, options); + switch (parse_long_opt(ctx, arg + 2, options)) { + case -1: + return parse_options_usage(usagestr, options); + case -2: + goto unknown; + } + continue; +unknown: + if (!(ctx->flags & PARSE_OPT_KEEP_UNKNOWN)) + return PARSE_OPT_UNKNOWN; + ctx->out[ctx->cpidx++] = ctx->argv[0]; + ctx->opt = NULL; + } + return PARSE_OPT_DONE; +} + +int parse_options_end(struct parse_opt_ctx_t *ctx) +{ + memmove(ctx->out + ctx->cpidx, ctx->argv, ctx->argc * sizeof(*ctx->out)); + ctx->out[ctx->cpidx + ctx->argc] = NULL; + return ctx->cpidx + ctx->argc; +} + +int parse_options(int argc, const char **argv, const struct option *options, + const char * const usagestr[], int flags) +{ + struct parse_opt_ctx_t ctx; + + parse_options_start(&ctx, argc, argv, flags); + switch (parse_options_step(&ctx, options, usagestr)) { + case PARSE_OPT_HELP: + exit(129); + case PARSE_OPT_DONE: + break; + default: /* PARSE_OPT_UNKNOWN */ + if (ctx.argv[0][1] == '-') { + error("unknown option `%s'", ctx.argv[0] + 2); + } else { + error("unknown switch `%c'", *ctx.opt); + } + usage_with_options(usagestr, options); + } + + return parse_options_end(&ctx); +} + +#define USAGE_OPTS_WIDTH 24 +#define USAGE_GAP 2 + +int usage_with_options_internal(const char * const *usagestr, + const struct option *opts, int full) +{ + if (!usagestr) + return PARSE_OPT_HELP; + + fprintf(stderr, "\n usage: %s\n", *usagestr++); + while (*usagestr && **usagestr) + fprintf(stderr, " or: %s\n", *usagestr++); + while (*usagestr) { + fprintf(stderr, "%s%s\n", + **usagestr ? " " : "", + *usagestr); + usagestr++; + } + + if (opts->type != OPTION_GROUP) + fputc('\n', stderr); + + for (; opts->type != OPTION_END; opts++) { + size_t pos; + int pad; + + if (opts->type == OPTION_GROUP) { + fputc('\n', stderr); + if (*opts->help) + fprintf(stderr, "%s\n", opts->help); + continue; + } + if (!full && (opts->flags & PARSE_OPT_HIDDEN)) + continue; + + pos = fprintf(stderr, " "); + if (opts->short_name) + pos += fprintf(stderr, "-%c", opts->short_name); + if (opts->long_name && opts->short_name) + pos += fprintf(stderr, ", "); + if (opts->long_name) + pos += fprintf(stderr, "--%s", opts->long_name); + + switch (opts->type) { + case OPTION_ARGUMENT: + break; + case OPTION_INTEGER: + if (opts->flags & PARSE_OPT_OPTARG) + if (opts->long_name) + pos += fprintf(stderr, "[=]"); + else + pos += fprintf(stderr, "[]"); + else + pos += fprintf(stderr, " "); + break; + case OPTION_CALLBACK: + if (opts->flags & PARSE_OPT_NOARG) + break; + /* FALLTHROUGH */ + case OPTION_STRING: + if (opts->argh) { + if (opts->flags & PARSE_OPT_OPTARG) + if (opts->long_name) + pos += fprintf(stderr, "[=<%s>]", opts->argh); + else + pos += fprintf(stderr, "[<%s>]", opts->argh); + else + pos += fprintf(stderr, " <%s>", opts->argh); + } else { + if (opts->flags & PARSE_OPT_OPTARG) + if (opts->long_name) + pos += fprintf(stderr, "[=...]"); + else + pos += fprintf(stderr, "[...]"); + else + pos += fprintf(stderr, " ..."); + } + break; + default: /* OPTION_{BIT,BOOLEAN,SET_INT,SET_PTR} */ + break; + } + + if (pos <= USAGE_OPTS_WIDTH) + pad = USAGE_OPTS_WIDTH - pos; + else { + fputc('\n', stderr); + pad = USAGE_OPTS_WIDTH; + } + fprintf(stderr, "%*s%s\n", pad + USAGE_GAP, "", opts->help); + } + fputc('\n', stderr); + + return PARSE_OPT_HELP; +} + +void usage_with_options(const char * const *usagestr, + const struct option *opts) +{ + usage_with_options_internal(usagestr, opts, 0); + exit(129); +} + +int parse_options_usage(const char * const *usagestr, + const struct option *opts) +{ + return usage_with_options_internal(usagestr, opts, 0); +} + + +int parse_opt_verbosity_cb(const struct option *opt, const char *arg, + int unset) +{ + int *target = opt->value; + + if (unset) + /* --no-quiet, --no-verbose */ + *target = 0; + else if (opt->short_name == 'v') { + if (*target >= 0) + (*target)++; + else + *target = 1; + } else { + if (*target <= 0) + (*target)--; + else + *target = -1; + } + return 0; +} diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h new file mode 100644 index 0000000..a1039a6 --- /dev/null +++ b/tools/perf/util/parse-options.h @@ -0,0 +1,174 @@ +#ifndef PARSE_OPTIONS_H +#define PARSE_OPTIONS_H + +enum parse_opt_type { + /* special types */ + OPTION_END, + OPTION_ARGUMENT, + OPTION_GROUP, + /* options with no arguments */ + OPTION_BIT, + OPTION_BOOLEAN, /* _INCR would have been a better name */ + OPTION_SET_INT, + OPTION_SET_PTR, + /* options with arguments (usually) */ + OPTION_STRING, + OPTION_INTEGER, + OPTION_LONG, + OPTION_CALLBACK, +}; + +enum parse_opt_flags { + PARSE_OPT_KEEP_DASHDASH = 1, + PARSE_OPT_STOP_AT_NON_OPTION = 2, + PARSE_OPT_KEEP_ARGV0 = 4, + PARSE_OPT_KEEP_UNKNOWN = 8, + PARSE_OPT_NO_INTERNAL_HELP = 16, +}; + +enum parse_opt_option_flags { + PARSE_OPT_OPTARG = 1, + PARSE_OPT_NOARG = 2, + PARSE_OPT_NONEG = 4, + PARSE_OPT_HIDDEN = 8, + PARSE_OPT_LASTARG_DEFAULT = 16, +}; + +struct option; +typedef int parse_opt_cb(const struct option *, const char *arg, int unset); + +/* + * `type`:: + * holds the type of the option, you must have an OPTION_END last in your + * array. + * + * `short_name`:: + * the character to use as a short option name, '\0' if none. + * + * `long_name`:: + * the long option name, without the leading dashes, NULL if none. + * + * `value`:: + * stores pointers to the values to be filled. + * + * `argh`:: + * token to explain the kind of argument this option wants. Keep it + * homogenous across the repository. + * + * `help`:: + * the short help associated to what the option does. + * Must never be NULL (except for OPTION_END). + * OPTION_GROUP uses this pointer to store the group header. + * + * `flags`:: + * mask of parse_opt_option_flags. + * PARSE_OPT_OPTARG: says that the argument is optionnal (not for BOOLEANs) + * PARSE_OPT_NOARG: says that this option takes no argument, for CALLBACKs + * PARSE_OPT_NONEG: says that this option cannot be negated + * PARSE_OPT_HIDDEN this option is skipped in the default usage, showed in + * the long one. + * + * `callback`:: + * pointer to the callback to use for OPTION_CALLBACK. + * + * `defval`:: + * default value to fill (*->value) with for PARSE_OPT_OPTARG. + * OPTION_{BIT,SET_INT,SET_PTR} store the {mask,integer,pointer} to put in + * the value when met. + * CALLBACKS can use it like they want. + */ +struct option { + enum parse_opt_type type; + int short_name; + const char *long_name; + void *value; + const char *argh; + const char *help; + + int flags; + parse_opt_cb *callback; + intptr_t defval; +}; + +#define OPT_END() { OPTION_END } +#define OPT_ARGUMENT(l, h) { OPTION_ARGUMENT, 0, (l), NULL, NULL, (h) } +#define OPT_GROUP(h) { OPTION_GROUP, 0, NULL, NULL, NULL, (h) } +#define OPT_BIT(s, l, v, h, b) { OPTION_BIT, (s), (l), (v), NULL, (h), 0, NULL, (b) } +#define OPT_BOOLEAN(s, l, v, h) { OPTION_BOOLEAN, (s), (l), (v), NULL, (h) } +#define OPT_SET_INT(s, l, v, h, i) { OPTION_SET_INT, (s), (l), (v), NULL, (h), 0, NULL, (i) } +#define OPT_SET_PTR(s, l, v, h, p) { OPTION_SET_PTR, (s), (l), (v), NULL, (h), 0, NULL, (p) } +#define OPT_INTEGER(s, l, v, h) { OPTION_INTEGER, (s), (l), (v), NULL, (h) } +#define OPT_LONG(s, l, v, h) { OPTION_LONG, (s), (l), (v), NULL, (h) } +#define OPT_STRING(s, l, v, a, h) { OPTION_STRING, (s), (l), (v), (a), (h) } +#define OPT_DATE(s, l, v, h) \ + { OPTION_CALLBACK, (s), (l), (v), "time",(h), 0, \ + parse_opt_approxidate_cb } +#define OPT_CALLBACK(s, l, v, a, h, f) \ + { OPTION_CALLBACK, (s), (l), (v), (a), (h), 0, (f) } + +/* parse_options() will filter out the processed options and leave the + * non-option argments in argv[]. + * Returns the number of arguments left in argv[]. + */ +extern int parse_options(int argc, const char **argv, + const struct option *options, + const char * const usagestr[], int flags); + +extern NORETURN void usage_with_options(const char * const *usagestr, + const struct option *options); + +/*----- incremantal advanced APIs -----*/ + +enum { + PARSE_OPT_HELP = -1, + PARSE_OPT_DONE, + PARSE_OPT_UNKNOWN, +}; + +/* + * It's okay for the caller to consume argv/argc in the usual way. + * Other fields of that structure are private to parse-options and should not + * be modified in any way. + */ +struct parse_opt_ctx_t { + const char **argv; + const char **out; + int argc, cpidx; + const char *opt; + int flags; +}; + +extern int parse_options_usage(const char * const *usagestr, + const struct option *opts); + +extern void parse_options_start(struct parse_opt_ctx_t *ctx, + int argc, const char **argv, int flags); + +extern int parse_options_step(struct parse_opt_ctx_t *ctx, + const struct option *options, + const char * const usagestr[]); + +extern int parse_options_end(struct parse_opt_ctx_t *ctx); + + +/*----- some often used options -----*/ +extern int parse_opt_abbrev_cb(const struct option *, const char *, int); +extern int parse_opt_approxidate_cb(const struct option *, const char *, int); +extern int parse_opt_verbosity_cb(const struct option *, const char *, int); + +#define OPT__VERBOSE(var) OPT_BOOLEAN('v', "verbose", (var), "be verbose") +#define OPT__QUIET(var) OPT_BOOLEAN('q', "quiet", (var), "be quiet") +#define OPT__VERBOSITY(var) \ + { OPTION_CALLBACK, 'v', "verbose", (var), NULL, "be more verbose", \ + PARSE_OPT_NOARG, &parse_opt_verbosity_cb, 0 }, \ + { OPTION_CALLBACK, 'q', "quiet", (var), NULL, "be more quiet", \ + PARSE_OPT_NOARG, &parse_opt_verbosity_cb, 0 } +#define OPT__DRY_RUN(var) OPT_BOOLEAN('n', "dry-run", (var), "dry run") +#define OPT__ABBREV(var) \ + { OPTION_CALLBACK, 0, "abbrev", (var), "n", \ + "use digits to display SHA-1s", \ + PARSE_OPT_OPTARG, &parse_opt_abbrev_cb, 0 } + +extern const char *parse_options_fix_filename(const char *prefix, const char *file); + +#endif diff --git a/tools/perf/util/path.c b/tools/perf/util/path.c new file mode 100644 index 0000000..a501a40 --- /dev/null +++ b/tools/perf/util/path.c @@ -0,0 +1,353 @@ +/* + * I'm tired of doing "vsnprintf()" etc just to open a + * file, so here's a "return static buffer with printf" + * interface for paths. + * + * It's obviously not thread-safe. Sue me. But it's quite + * useful for doing things like + * + * f = open(mkpath("%s/%s.perf", base, name), O_RDONLY); + * + * which is what it's designed for. + */ +#include "cache.h" + +static char bad_path[] = "/bad-path/"; +/* + * Two hacks: + */ + +static char *get_perf_dir(void) +{ + return "."; +} + +size_t strlcpy(char *dest, const char *src, size_t size) +{ + size_t ret = strlen(src); + + if (size) { + size_t len = (ret >= size) ? size - 1 : ret; + memcpy(dest, src, len); + dest[len] = '\0'; + } + return ret; +} + + +static char *get_pathname(void) +{ + static char pathname_array[4][PATH_MAX]; + static int index; + return pathname_array[3 & ++index]; +} + +static char *cleanup_path(char *path) +{ + /* Clean it up */ + if (!memcmp(path, "./", 2)) { + path += 2; + while (*path == '/') + path++; + } + return path; +} + +char *mksnpath(char *buf, size_t n, const char *fmt, ...) +{ + va_list args; + unsigned len; + + va_start(args, fmt); + len = vsnprintf(buf, n, fmt, args); + va_end(args); + if (len >= n) { + strlcpy(buf, bad_path, n); + return buf; + } + return cleanup_path(buf); +} + +static char *perf_vsnpath(char *buf, size_t n, const char *fmt, va_list args) +{ + const char *perf_dir = get_perf_dir(); + size_t len; + + len = strlen(perf_dir); + if (n < len + 1) + goto bad; + memcpy(buf, perf_dir, len); + if (len && !is_dir_sep(perf_dir[len-1])) + buf[len++] = '/'; + len += vsnprintf(buf + len, n - len, fmt, args); + if (len >= n) + goto bad; + return cleanup_path(buf); +bad: + strlcpy(buf, bad_path, n); + return buf; +} + +char *perf_snpath(char *buf, size_t n, const char *fmt, ...) +{ + va_list args; + va_start(args, fmt); + (void)perf_vsnpath(buf, n, fmt, args); + va_end(args); + return buf; +} + +char *perf_pathdup(const char *fmt, ...) +{ + char path[PATH_MAX]; + va_list args; + va_start(args, fmt); + (void)perf_vsnpath(path, sizeof(path), fmt, args); + va_end(args); + return xstrdup(path); +} + +char *mkpath(const char *fmt, ...) +{ + va_list args; + unsigned len; + char *pathname = get_pathname(); + + va_start(args, fmt); + len = vsnprintf(pathname, PATH_MAX, fmt, args); + va_end(args); + if (len >= PATH_MAX) + return bad_path; + return cleanup_path(pathname); +} + +char *perf_path(const char *fmt, ...) +{ + const char *perf_dir = get_perf_dir(); + char *pathname = get_pathname(); + va_list args; + unsigned len; + + len = strlen(perf_dir); + if (len > PATH_MAX-100) + return bad_path; + memcpy(pathname, perf_dir, len); + if (len && perf_dir[len-1] != '/') + pathname[len++] = '/'; + va_start(args, fmt); + len += vsnprintf(pathname + len, PATH_MAX - len, fmt, args); + va_end(args); + if (len >= PATH_MAX) + return bad_path; + return cleanup_path(pathname); +} + + +/* perf_mkstemp() - create tmp file honoring TMPDIR variable */ +int perf_mkstemp(char *path, size_t len, const char *template) +{ + const char *tmp; + size_t n; + + tmp = getenv("TMPDIR"); + if (!tmp) + tmp = "/tmp"; + n = snprintf(path, len, "%s/%s", tmp, template); + if (len <= n) { + errno = ENAMETOOLONG; + return -1; + } + return mkstemp(path); +} + + +const char *make_relative_path(const char *abs, const char *base) +{ + static char buf[PATH_MAX + 1]; + int baselen; + if (!base) + return abs; + baselen = strlen(base); + if (prefixcmp(abs, base)) + return abs; + if (abs[baselen] == '/') + baselen++; + else if (base[baselen - 1] != '/') + return abs; + strcpy(buf, abs + baselen); + return buf; +} + +/* + * It is okay if dst == src, but they should not overlap otherwise. + * + * Performs the following normalizations on src, storing the result in dst: + * - Ensures that components are separated by '/' (Windows only) + * - Squashes sequences of '/'. + * - Removes "." components. + * - Removes ".." components, and the components the precede them. + * Returns failure (non-zero) if a ".." component appears as first path + * component anytime during the normalization. Otherwise, returns success (0). + * + * Note that this function is purely textual. It does not follow symlinks, + * verify the existence of the path, or make any system calls. + */ +int normalize_path_copy(char *dst, const char *src) +{ + char *dst0; + + if (has_dos_drive_prefix(src)) { + *dst++ = *src++; + *dst++ = *src++; + } + dst0 = dst; + + if (is_dir_sep(*src)) { + *dst++ = '/'; + while (is_dir_sep(*src)) + src++; + } + + for (;;) { + char c = *src; + + /* + * A path component that begins with . could be + * special: + * (1) "." and ends -- ignore and terminate. + * (2) "./" -- ignore them, eat slash and continue. + * (3) ".." and ends -- strip one and terminate. + * (4) "../" -- strip one, eat slash and continue. + */ + if (c == '.') { + if (!src[1]) { + /* (1) */ + src++; + } else if (is_dir_sep(src[1])) { + /* (2) */ + src += 2; + while (is_dir_sep(*src)) + src++; + continue; + } else if (src[1] == '.') { + if (!src[2]) { + /* (3) */ + src += 2; + goto up_one; + } else if (is_dir_sep(src[2])) { + /* (4) */ + src += 3; + while (is_dir_sep(*src)) + src++; + goto up_one; + } + } + } + + /* copy up to the next '/', and eat all '/' */ + while ((c = *src++) != '\0' && !is_dir_sep(c)) + *dst++ = c; + if (is_dir_sep(c)) { + *dst++ = '/'; + while (is_dir_sep(c)) + c = *src++; + src--; + } else if (!c) + break; + continue; + + up_one: + /* + * dst0..dst is prefix portion, and dst[-1] is '/'; + * go up one level. + */ + dst--; /* go to trailing '/' */ + if (dst <= dst0) + return -1; + /* Windows: dst[-1] cannot be backslash anymore */ + while (dst0 < dst && dst[-1] != '/') + dst--; + } + *dst = '\0'; + return 0; +} + +/* + * path = Canonical absolute path + * prefix_list = Colon-separated list of absolute paths + * + * Determines, for each path in prefix_list, whether the "prefix" really + * is an ancestor directory of path. Returns the length of the longest + * ancestor directory, excluding any trailing slashes, or -1 if no prefix + * is an ancestor. (Note that this means 0 is returned if prefix_list is + * "/".) "/foo" is not considered an ancestor of "/foobar". Directories + * are not considered to be their own ancestors. path must be in a + * canonical form: empty components, or "." or ".." components are not + * allowed. prefix_list may be null, which is like "". + */ +int longest_ancestor_length(const char *path, const char *prefix_list) +{ + char buf[PATH_MAX+1]; + const char *ceil, *colon; + int len, max_len = -1; + + if (prefix_list == NULL || !strcmp(path, "/")) + return -1; + + for (colon = ceil = prefix_list; *colon; ceil = colon+1) { + for (colon = ceil; *colon && *colon != PATH_SEP; colon++); + len = colon - ceil; + if (len == 0 || len > PATH_MAX || !is_absolute_path(ceil)) + continue; + strlcpy(buf, ceil, len+1); + if (normalize_path_copy(buf, buf) < 0) + continue; + len = strlen(buf); + if (len > 0 && buf[len-1] == '/') + buf[--len] = '\0'; + + if (!strncmp(path, buf, len) && + path[len] == '/' && + len > max_len) { + max_len = len; + } + } + + return max_len; +} + +/* strip arbitrary amount of directory separators at end of path */ +static inline int chomp_trailing_dir_sep(const char *path, int len) +{ + while (len && is_dir_sep(path[len - 1])) + len--; + return len; +} + +/* + * If path ends with suffix (complete path components), returns the + * part before suffix (sans trailing directory separators). + * Otherwise returns NULL. + */ +char *strip_path_suffix(const char *path, const char *suffix) +{ + int path_len = strlen(path), suffix_len = strlen(suffix); + + while (suffix_len) { + if (!path_len) + return NULL; + + if (is_dir_sep(path[path_len - 1])) { + if (!is_dir_sep(suffix[suffix_len - 1])) + return NULL; + path_len = chomp_trailing_dir_sep(path, path_len); + suffix_len = chomp_trailing_dir_sep(suffix, suffix_len); + } + else if (path[--path_len] != suffix[--suffix_len]) + return NULL; + } + + if (path_len && !is_dir_sep(path[path_len - 1])) + return NULL; + return xstrndup(path, chomp_trailing_dir_sep(path, path_len)); +} diff --git a/tools/perf/util/quote.c b/tools/perf/util/quote.c new file mode 100644 index 0000000..f18c521 --- /dev/null +++ b/tools/perf/util/quote.c @@ -0,0 +1,481 @@ +#include "cache.h" +#include "quote.h" + +int quote_path_fully = 1; + +/* Help to copy the thing properly quoted for the shell safety. + * any single quote is replaced with '\'', any exclamation point + * is replaced with '\!', and the whole thing is enclosed in a + * + * E.g. + * original sq_quote result + * name ==> name ==> 'name' + * a b ==> a b ==> 'a b' + * a'b ==> a'\''b ==> 'a'\''b' + * a!b ==> a'\!'b ==> 'a'\!'b' + */ +static inline int need_bs_quote(char c) +{ + return (c == '\'' || c == '!'); +} + +void sq_quote_buf(struct strbuf *dst, const char *src) +{ + char *to_free = NULL; + + if (dst->buf == src) + to_free = strbuf_detach(dst, NULL); + + strbuf_addch(dst, '\''); + while (*src) { + size_t len = strcspn(src, "'!"); + strbuf_add(dst, src, len); + src += len; + while (need_bs_quote(*src)) { + strbuf_addstr(dst, "'\\"); + strbuf_addch(dst, *src++); + strbuf_addch(dst, '\''); + } + } + strbuf_addch(dst, '\''); + free(to_free); +} + +void sq_quote_print(FILE *stream, const char *src) +{ + char c; + + fputc('\'', stream); + while ((c = *src++)) { + if (need_bs_quote(c)) { + fputs("'\\", stream); + fputc(c, stream); + fputc('\'', stream); + } else { + fputc(c, stream); + } + } + fputc('\'', stream); +} + +void sq_quote_argv(struct strbuf *dst, const char** argv, size_t maxlen) +{ + int i; + + /* Copy into destination buffer. */ + strbuf_grow(dst, 255); + for (i = 0; argv[i]; ++i) { + strbuf_addch(dst, ' '); + sq_quote_buf(dst, argv[i]); + if (maxlen && dst->len > maxlen) + die("Too many or long arguments"); + } +} + +char *sq_dequote_step(char *arg, char **next) +{ + char *dst = arg; + char *src = arg; + char c; + + if (*src != '\'') + return NULL; + for (;;) { + c = *++src; + if (!c) + return NULL; + if (c != '\'') { + *dst++ = c; + continue; + } + /* We stepped out of sq */ + switch (*++src) { + case '\0': + *dst = 0; + if (next) + *next = NULL; + return arg; + case '\\': + c = *++src; + if (need_bs_quote(c) && *++src == '\'') { + *dst++ = c; + continue; + } + /* Fallthrough */ + default: + if (!next || !isspace(*src)) + return NULL; + do { + c = *++src; + } while (isspace(c)); + *dst = 0; + *next = src; + return arg; + } + } +} + +char *sq_dequote(char *arg) +{ + return sq_dequote_step(arg, NULL); +} + +int sq_dequote_to_argv(char *arg, const char ***argv, int *nr, int *alloc) +{ + char *next = arg; + + if (!*arg) + return 0; + do { + char *dequoted = sq_dequote_step(next, &next); + if (!dequoted) + return -1; + ALLOC_GROW(*argv, *nr + 1, *alloc); + (*argv)[(*nr)++] = dequoted; + } while (next); + + return 0; +} + +/* 1 means: quote as octal + * 0 means: quote as octal if (quote_path_fully) + * -1 means: never quote + * c: quote as "\\c" + */ +#define X8(x) x, x, x, x, x, x, x, x +#define X16(x) X8(x), X8(x) +static signed char const sq_lookup[256] = { + /* 0 1 2 3 4 5 6 7 */ + /* 0x00 */ 1, 1, 1, 1, 1, 1, 1, 'a', + /* 0x08 */ 'b', 't', 'n', 'v', 'f', 'r', 1, 1, + /* 0x10 */ X16(1), + /* 0x20 */ -1, -1, '"', -1, -1, -1, -1, -1, + /* 0x28 */ X16(-1), X16(-1), X16(-1), + /* 0x58 */ -1, -1, -1, -1,'\\', -1, -1, -1, + /* 0x60 */ X16(-1), X8(-1), + /* 0x78 */ -1, -1, -1, -1, -1, -1, -1, 1, + /* 0x80 */ /* set to 0 */ +}; + +static inline int sq_must_quote(char c) +{ + return sq_lookup[(unsigned char)c] + quote_path_fully > 0; +} + +/* returns the longest prefix not needing a quote up to maxlen if positive. + This stops at the first \0 because it's marked as a character needing an + escape */ +static size_t next_quote_pos(const char *s, ssize_t maxlen) +{ + size_t len; + if (maxlen < 0) { + for (len = 0; !sq_must_quote(s[len]); len++); + } else { + for (len = 0; len < maxlen && !sq_must_quote(s[len]); len++); + } + return len; +} + +/* + * C-style name quoting. + * + * (1) if sb and fp are both NULL, inspect the input name and counts the + * number of bytes that are needed to hold c_style quoted version of name, + * counting the double quotes around it but not terminating NUL, and + * returns it. + * However, if name does not need c_style quoting, it returns 0. + * + * (2) if sb or fp are not NULL, it emits the c_style quoted version + * of name, enclosed with double quotes if asked and needed only. + * Return value is the same as in (1). + */ +static size_t quote_c_style_counted(const char *name, ssize_t maxlen, + struct strbuf *sb, FILE *fp, int no_dq) +{ +#undef EMIT +#define EMIT(c) \ + do { \ + if (sb) strbuf_addch(sb, (c)); \ + if (fp) fputc((c), fp); \ + count++; \ + } while (0) +#define EMITBUF(s, l) \ + do { \ + int __ret; \ + if (sb) strbuf_add(sb, (s), (l)); \ + if (fp) __ret = fwrite((s), (l), 1, fp); \ + count += (l); \ + } while (0) + + size_t len, count = 0; + const char *p = name; + + for (;;) { + int ch; + + len = next_quote_pos(p, maxlen); + if (len == maxlen || !p[len]) + break; + + if (!no_dq && p == name) + EMIT('"'); + + EMITBUF(p, len); + EMIT('\\'); + p += len; + ch = (unsigned char)*p++; + if (sq_lookup[ch] >= ' ') { + EMIT(sq_lookup[ch]); + } else { + EMIT(((ch >> 6) & 03) + '0'); + EMIT(((ch >> 3) & 07) + '0'); + EMIT(((ch >> 0) & 07) + '0'); + } + } + + EMITBUF(p, len); + if (p == name) /* no ending quote needed */ + return 0; + + if (!no_dq) + EMIT('"'); + return count; +} + +size_t quote_c_style(const char *name, struct strbuf *sb, FILE *fp, int nodq) +{ + return quote_c_style_counted(name, -1, sb, fp, nodq); +} + +void quote_two_c_style(struct strbuf *sb, const char *prefix, const char *path, int nodq) +{ + if (quote_c_style(prefix, NULL, NULL, 0) || + quote_c_style(path, NULL, NULL, 0)) { + if (!nodq) + strbuf_addch(sb, '"'); + quote_c_style(prefix, sb, NULL, 1); + quote_c_style(path, sb, NULL, 1); + if (!nodq) + strbuf_addch(sb, '"'); + } else { + strbuf_addstr(sb, prefix); + strbuf_addstr(sb, path); + } +} + +void write_name_quoted(const char *name, FILE *fp, int terminator) +{ + if (terminator) { + quote_c_style(name, NULL, fp, 0); + } else { + fputs(name, fp); + } + fputc(terminator, fp); +} + +extern void write_name_quotedpfx(const char *pfx, size_t pfxlen, + const char *name, FILE *fp, int terminator) +{ + int needquote = 0; + + if (terminator) { + needquote = next_quote_pos(pfx, pfxlen) < pfxlen + || name[next_quote_pos(name, -1)]; + } + if (needquote) { + fputc('"', fp); + quote_c_style_counted(pfx, pfxlen, NULL, fp, 1); + quote_c_style(name, NULL, fp, 1); + fputc('"', fp); + } else { + int ret; + + ret = fwrite(pfx, pfxlen, 1, fp); + fputs(name, fp); + } + fputc(terminator, fp); +} + +/* quote path as relative to the given prefix */ +char *quote_path_relative(const char *in, int len, + struct strbuf *out, const char *prefix) +{ + int needquote; + + if (len < 0) + len = strlen(in); + + /* "../" prefix itself does not need quoting, but "in" might. */ + needquote = next_quote_pos(in, len) < len; + strbuf_setlen(out, 0); + strbuf_grow(out, len); + + if (needquote) + strbuf_addch(out, '"'); + if (prefix) { + int off = 0; + while (prefix[off] && off < len && prefix[off] == in[off]) + if (prefix[off] == '/') { + prefix += off + 1; + in += off + 1; + len -= off + 1; + off = 0; + } else + off++; + + for (; *prefix; prefix++) + if (*prefix == '/') + strbuf_addstr(out, "../"); + } + + quote_c_style_counted (in, len, out, NULL, 1); + + if (needquote) + strbuf_addch(out, '"'); + if (!out->len) + strbuf_addstr(out, "./"); + + return out->buf; +} + +/* + * C-style name unquoting. + * + * Quoted should point at the opening double quote. + * + Returns 0 if it was able to unquote the string properly, and appends the + * result in the strbuf `sb'. + * + Returns -1 in case of error, and doesn't touch the strbuf. Though note + * that this function will allocate memory in the strbuf, so calling + * strbuf_release is mandatory whichever result unquote_c_style returns. + * + * Updates endp pointer to point at one past the ending double quote if given. + */ +int unquote_c_style(struct strbuf *sb, const char *quoted, const char **endp) +{ + size_t oldlen = sb->len, len; + int ch, ac; + + if (*quoted++ != '"') + return -1; + + for (;;) { + len = strcspn(quoted, "\"\\"); + strbuf_add(sb, quoted, len); + quoted += len; + + switch (*quoted++) { + case '"': + if (endp) + *endp = quoted; + return 0; + case '\\': + break; + default: + goto error; + } + + switch ((ch = *quoted++)) { + case 'a': ch = '\a'; break; + case 'b': ch = '\b'; break; + case 'f': ch = '\f'; break; + case 'n': ch = '\n'; break; + case 'r': ch = '\r'; break; + case 't': ch = '\t'; break; + case 'v': ch = '\v'; break; + + case '\\': case '"': + break; /* verbatim */ + + /* octal values with first digit over 4 overflow */ + case '0': case '1': case '2': case '3': + ac = ((ch - '0') << 6); + if ((ch = *quoted++) < '0' || '7' < ch) + goto error; + ac |= ((ch - '0') << 3); + if ((ch = *quoted++) < '0' || '7' < ch) + goto error; + ac |= (ch - '0'); + ch = ac; + break; + default: + goto error; + } + strbuf_addch(sb, ch); + } + + error: + strbuf_setlen(sb, oldlen); + return -1; +} + +/* quoting as a string literal for other languages */ + +void perl_quote_print(FILE *stream, const char *src) +{ + const char sq = '\''; + const char bq = '\\'; + char c; + + fputc(sq, stream); + while ((c = *src++)) { + if (c == sq || c == bq) + fputc(bq, stream); + fputc(c, stream); + } + fputc(sq, stream); +} + +void python_quote_print(FILE *stream, const char *src) +{ + const char sq = '\''; + const char bq = '\\'; + const char nl = '\n'; + char c; + + fputc(sq, stream); + while ((c = *src++)) { + if (c == nl) { + fputc(bq, stream); + fputc('n', stream); + continue; + } + if (c == sq || c == bq) + fputc(bq, stream); + fputc(c, stream); + } + fputc(sq, stream); +} + +void tcl_quote_print(FILE *stream, const char *src) +{ + char c; + + fputc('"', stream); + while ((c = *src++)) { + switch (c) { + case '[': case ']': + case '{': case '}': + case '$': case '\\': case '"': + fputc('\\', stream); + default: + fputc(c, stream); + break; + case '\f': + fputs("\\f", stream); + break; + case '\r': + fputs("\\r", stream); + break; + case '\n': + fputs("\\n", stream); + break; + case '\t': + fputs("\\t", stream); + break; + case '\v': + fputs("\\v", stream); + break; + } + } + fputc('"', stream); +} diff --git a/tools/perf/util/quote.h b/tools/perf/util/quote.h new file mode 100644 index 0000000..5dfad89 --- /dev/null +++ b/tools/perf/util/quote.h @@ -0,0 +1,68 @@ +#ifndef QUOTE_H +#define QUOTE_H + +#include +#include + +/* Help to copy the thing properly quoted for the shell safety. + * any single quote is replaced with '\'', any exclamation point + * is replaced with '\!', and the whole thing is enclosed in a + * single quote pair. + * + * For example, if you are passing the result to system() as an + * argument: + * + * sprintf(cmd, "foobar %s %s", sq_quote(arg0), sq_quote(arg1)) + * + * would be appropriate. If the system() is going to call ssh to + * run the command on the other side: + * + * sprintf(cmd, "git-diff-tree %s %s", sq_quote(arg0), sq_quote(arg1)); + * sprintf(rcmd, "ssh %s %s", sq_util/quote.host), sq_quote(cmd)); + * + * Note that the above examples leak memory! Remember to free result from + * sq_quote() in a real application. + * + * sq_quote_buf() writes to an existing buffer of specified size; it + * will return the number of characters that would have been written + * excluding the final null regardless of the buffer size. + */ + +extern void sq_quote_print(FILE *stream, const char *src); + +extern void sq_quote_buf(struct strbuf *, const char *src); +extern void sq_quote_argv(struct strbuf *, const char **argv, size_t maxlen); + +/* This unwraps what sq_quote() produces in place, but returns + * NULL if the input does not look like what sq_quote would have + * produced. + */ +extern char *sq_dequote(char *); + +/* + * Same as the above, but can be used to unwrap many arguments in the + * same string separated by space. "next" is changed to point to the + * next argument that should be passed as first parameter. When there + * is no more argument to be dequoted, "next" is updated to point to NULL. + */ +extern char *sq_dequote_step(char *arg, char **next); +extern int sq_dequote_to_argv(char *arg, const char ***argv, int *nr, int *alloc); + +extern int unquote_c_style(struct strbuf *, const char *quoted, const char **endp); +extern size_t quote_c_style(const char *name, struct strbuf *, FILE *, int no_dq); +extern void quote_two_c_style(struct strbuf *, const char *, const char *, int); + +extern void write_name_quoted(const char *name, FILE *, int terminator); +extern void write_name_quotedpfx(const char *pfx, size_t pfxlen, + const char *name, FILE *, int terminator); + +/* quote path as relative to the given prefix */ +char *quote_path_relative(const char *in, int len, + struct strbuf *out, const char *prefix); + +/* quoting as a string literal for other languages */ +extern void perl_quote_print(FILE *stream, const char *src); +extern void python_quote_print(FILE *stream, const char *src); +extern void tcl_quote_print(FILE *stream, const char *src); + +#endif diff --git a/tools/perf/util/rbtree.c b/tools/perf/util/rbtree.c new file mode 100644 index 0000000..b15ba9c --- /dev/null +++ b/tools/perf/util/rbtree.c @@ -0,0 +1,383 @@ +/* + Red Black Trees + (C) 1999 Andrea Arcangeli + (C) 2002 David Woodhouse + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + linux/lib/rbtree.c +*/ + +#include "rbtree.h" + +static void __rb_rotate_left(struct rb_node *node, struct rb_root *root) +{ + struct rb_node *right = node->rb_right; + struct rb_node *parent = rb_parent(node); + + if ((node->rb_right = right->rb_left)) + rb_set_parent(right->rb_left, node); + right->rb_left = node; + + rb_set_parent(right, parent); + + if (parent) + { + if (node == parent->rb_left) + parent->rb_left = right; + else + parent->rb_right = right; + } + else + root->rb_node = right; + rb_set_parent(node, right); +} + +static void __rb_rotate_right(struct rb_node *node, struct rb_root *root) +{ + struct rb_node *left = node->rb_left; + struct rb_node *parent = rb_parent(node); + + if ((node->rb_left = left->rb_right)) + rb_set_parent(left->rb_right, node); + left->rb_right = node; + + rb_set_parent(left, parent); + + if (parent) + { + if (node == parent->rb_right) + parent->rb_right = left; + else + parent->rb_left = left; + } + else + root->rb_node = left; + rb_set_parent(node, left); +} + +void rb_insert_color(struct rb_node *node, struct rb_root *root) +{ + struct rb_node *parent, *gparent; + + while ((parent = rb_parent(node)) && rb_is_red(parent)) + { + gparent = rb_parent(parent); + + if (parent == gparent->rb_left) + { + { + register struct rb_node *uncle = gparent->rb_right; + if (uncle && rb_is_red(uncle)) + { + rb_set_black(uncle); + rb_set_black(parent); + rb_set_red(gparent); + node = gparent; + continue; + } + } + + if (parent->rb_right == node) + { + register struct rb_node *tmp; + __rb_rotate_left(parent, root); + tmp = parent; + parent = node; + node = tmp; + } + + rb_set_black(parent); + rb_set_red(gparent); + __rb_rotate_right(gparent, root); + } else { + { + register struct rb_node *uncle = gparent->rb_left; + if (uncle && rb_is_red(uncle)) + { + rb_set_black(uncle); + rb_set_black(parent); + rb_set_red(gparent); + node = gparent; + continue; + } + } + + if (parent->rb_left == node) + { + register struct rb_node *tmp; + __rb_rotate_right(parent, root); + tmp = parent; + parent = node; + node = tmp; + } + + rb_set_black(parent); + rb_set_red(gparent); + __rb_rotate_left(gparent, root); + } + } + + rb_set_black(root->rb_node); +} + +static void __rb_erase_color(struct rb_node *node, struct rb_node *parent, + struct rb_root *root) +{ + struct rb_node *other; + + while ((!node || rb_is_black(node)) && node != root->rb_node) + { + if (parent->rb_left == node) + { + other = parent->rb_right; + if (rb_is_red(other)) + { + rb_set_black(other); + rb_set_red(parent); + __rb_rotate_left(parent, root); + other = parent->rb_right; + } + if ((!other->rb_left || rb_is_black(other->rb_left)) && + (!other->rb_right || rb_is_black(other->rb_right))) + { + rb_set_red(other); + node = parent; + parent = rb_parent(node); + } + else + { + if (!other->rb_right || rb_is_black(other->rb_right)) + { + rb_set_black(other->rb_left); + rb_set_red(other); + __rb_rotate_right(other, root); + other = parent->rb_right; + } + rb_set_color(other, rb_color(parent)); + rb_set_black(parent); + rb_set_black(other->rb_right); + __rb_rotate_left(parent, root); + node = root->rb_node; + break; + } + } + else + { + other = parent->rb_left; + if (rb_is_red(other)) + { + rb_set_black(other); + rb_set_red(parent); + __rb_rotate_right(parent, root); + other = parent->rb_left; + } + if ((!other->rb_left || rb_is_black(other->rb_left)) && + (!other->rb_right || rb_is_black(other->rb_right))) + { + rb_set_red(other); + node = parent; + parent = rb_parent(node); + } + else + { + if (!other->rb_left || rb_is_black(other->rb_left)) + { + rb_set_black(other->rb_right); + rb_set_red(other); + __rb_rotate_left(other, root); + other = parent->rb_left; + } + rb_set_color(other, rb_color(parent)); + rb_set_black(parent); + rb_set_black(other->rb_left); + __rb_rotate_right(parent, root); + node = root->rb_node; + break; + } + } + } + if (node) + rb_set_black(node); +} + +void rb_erase(struct rb_node *node, struct rb_root *root) +{ + struct rb_node *child, *parent; + int color; + + if (!node->rb_left) + child = node->rb_right; + else if (!node->rb_right) + child = node->rb_left; + else + { + struct rb_node *old = node, *left; + + node = node->rb_right; + while ((left = node->rb_left) != NULL) + node = left; + child = node->rb_right; + parent = rb_parent(node); + color = rb_color(node); + + if (child) + rb_set_parent(child, parent); + if (parent == old) { + parent->rb_right = child; + parent = node; + } else + parent->rb_left = child; + + node->rb_parent_color = old->rb_parent_color; + node->rb_right = old->rb_right; + node->rb_left = old->rb_left; + + if (rb_parent(old)) + { + if (rb_parent(old)->rb_left == old) + rb_parent(old)->rb_left = node; + else + rb_parent(old)->rb_right = node; + } else + root->rb_node = node; + + rb_set_parent(old->rb_left, node); + if (old->rb_right) + rb_set_parent(old->rb_right, node); + goto color; + } + + parent = rb_parent(node); + color = rb_color(node); + + if (child) + rb_set_parent(child, parent); + if (parent) + { + if (parent->rb_left == node) + parent->rb_left = child; + else + parent->rb_right = child; + } + else + root->rb_node = child; + + color: + if (color == RB_BLACK) + __rb_erase_color(child, parent, root); +} + +/* + * This function returns the first node (in sort order) of the tree. + */ +struct rb_node *rb_first(const struct rb_root *root) +{ + struct rb_node *n; + + n = root->rb_node; + if (!n) + return NULL; + while (n->rb_left) + n = n->rb_left; + return n; +} + +struct rb_node *rb_last(const struct rb_root *root) +{ + struct rb_node *n; + + n = root->rb_node; + if (!n) + return NULL; + while (n->rb_right) + n = n->rb_right; + return n; +} + +struct rb_node *rb_next(const struct rb_node *node) +{ + struct rb_node *parent; + + if (rb_parent(node) == node) + return NULL; + + /* If we have a right-hand child, go down and then left as far + as we can. */ + if (node->rb_right) { + node = node->rb_right; + while (node->rb_left) + node=node->rb_left; + return (struct rb_node *)node; + } + + /* No right-hand children. Everything down and left is + smaller than us, so any 'next' node must be in the general + direction of our parent. Go up the tree; any time the + ancestor is a right-hand child of its parent, keep going + up. First time it's a left-hand child of its parent, said + parent is our 'next' node. */ + while ((parent = rb_parent(node)) && node == parent->rb_right) + node = parent; + + return parent; +} + +struct rb_node *rb_prev(const struct rb_node *node) +{ + struct rb_node *parent; + + if (rb_parent(node) == node) + return NULL; + + /* If we have a left-hand child, go down and then right as far + as we can. */ + if (node->rb_left) { + node = node->rb_left; + while (node->rb_right) + node=node->rb_right; + return (struct rb_node *)node; + } + + /* No left-hand children. Go up till we find an ancestor which + is a right-hand child of its parent */ + while ((parent = rb_parent(node)) && node == parent->rb_left) + node = parent; + + return parent; +} + +void rb_replace_node(struct rb_node *victim, struct rb_node *new, + struct rb_root *root) +{ + struct rb_node *parent = rb_parent(victim); + + /* Set the surrounding nodes to point to the replacement */ + if (parent) { + if (victim == parent->rb_left) + parent->rb_left = new; + else + parent->rb_right = new; + } else { + root->rb_node = new; + } + if (victim->rb_left) + rb_set_parent(victim->rb_left, new); + if (victim->rb_right) + rb_set_parent(victim->rb_right, new); + + /* Copy the pointers/colour from the victim to the replacement */ + *new = *victim; +} diff --git a/tools/perf/util/rbtree.h b/tools/perf/util/rbtree.h new file mode 100644 index 0000000..6bdc488 --- /dev/null +++ b/tools/perf/util/rbtree.h @@ -0,0 +1,171 @@ +/* + Red Black Trees + (C) 1999 Andrea Arcangeli + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + linux/include/linux/rbtree.h + + To use rbtrees you'll have to implement your own insert and search cores. + This will avoid us to use callbacks and to drop drammatically performances. + I know it's not the cleaner way, but in C (not in C++) to get + performances and genericity... + + Some example of insert and search follows here. The search is a plain + normal search over an ordered tree. The insert instead must be implemented + int two steps: as first thing the code must insert the element in + order as a red leaf in the tree, then the support library function + rb_insert_color() must be called. Such function will do the + not trivial work to rebalance the rbtree if necessary. + +----------------------------------------------------------------------- +static inline struct page * rb_search_page_cache(struct inode * inode, + unsigned long offset) +{ + struct rb_node * n = inode->i_rb_page_cache.rb_node; + struct page * page; + + while (n) + { + page = rb_entry(n, struct page, rb_page_cache); + + if (offset < page->offset) + n = n->rb_left; + else if (offset > page->offset) + n = n->rb_right; + else + return page; + } + return NULL; +} + +static inline struct page * __rb_insert_page_cache(struct inode * inode, + unsigned long offset, + struct rb_node * node) +{ + struct rb_node ** p = &inode->i_rb_page_cache.rb_node; + struct rb_node * parent = NULL; + struct page * page; + + while (*p) + { + parent = *p; + page = rb_entry(parent, struct page, rb_page_cache); + + if (offset < page->offset) + p = &(*p)->rb_left; + else if (offset > page->offset) + p = &(*p)->rb_right; + else + return page; + } + + rb_link_node(node, parent, p); + + return NULL; +} + +static inline struct page * rb_insert_page_cache(struct inode * inode, + unsigned long offset, + struct rb_node * node) +{ + struct page * ret; + if ((ret = __rb_insert_page_cache(inode, offset, node))) + goto out; + rb_insert_color(node, &inode->i_rb_page_cache); + out: + return ret; +} +----------------------------------------------------------------------- +*/ + +#ifndef _LINUX_RBTREE_H +#define _LINUX_RBTREE_H + +#include + +/** + * container_of - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + +struct rb_node +{ + unsigned long rb_parent_color; +#define RB_RED 0 +#define RB_BLACK 1 + struct rb_node *rb_right; + struct rb_node *rb_left; +} __attribute__((aligned(sizeof(long)))); + /* The alignment might seem pointless, but allegedly CRIS needs it */ + +struct rb_root +{ + struct rb_node *rb_node; +}; + + +#define rb_parent(r) ((struct rb_node *)((r)->rb_parent_color & ~3)) +#define rb_color(r) ((r)->rb_parent_color & 1) +#define rb_is_red(r) (!rb_color(r)) +#define rb_is_black(r) rb_color(r) +#define rb_set_red(r) do { (r)->rb_parent_color &= ~1; } while (0) +#define rb_set_black(r) do { (r)->rb_parent_color |= 1; } while (0) + +static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p) +{ + rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p; +} +static inline void rb_set_color(struct rb_node *rb, int color) +{ + rb->rb_parent_color = (rb->rb_parent_color & ~1) | color; +} + +#define RB_ROOT (struct rb_root) { NULL, } +#define rb_entry(ptr, type, member) container_of(ptr, type, member) + +#define RB_EMPTY_ROOT(root) ((root)->rb_node == NULL) +#define RB_EMPTY_NODE(node) (rb_parent(node) == node) +#define RB_CLEAR_NODE(node) (rb_set_parent(node, node)) + +extern void rb_insert_color(struct rb_node *, struct rb_root *); +extern void rb_erase(struct rb_node *, struct rb_root *); + +/* Find logical next and previous nodes in a tree */ +extern struct rb_node *rb_next(const struct rb_node *); +extern struct rb_node *rb_prev(const struct rb_node *); +extern struct rb_node *rb_first(const struct rb_root *); +extern struct rb_node *rb_last(const struct rb_root *); + +/* Fast replacement of a single node without remove/rebalance/add/rebalance */ +extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, + struct rb_root *root); + +static inline void rb_link_node(struct rb_node * node, struct rb_node * parent, + struct rb_node ** rb_link) +{ + node->rb_parent_color = (unsigned long )parent; + node->rb_left = node->rb_right = NULL; + + *rb_link = node; +} + +#endif /* _LINUX_RBTREE_H */ diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c new file mode 100644 index 0000000..b2f5e85 --- /dev/null +++ b/tools/perf/util/run-command.c @@ -0,0 +1,395 @@ +#include "cache.h" +#include "run-command.h" +#include "exec_cmd.h" + +static inline void close_pair(int fd[2]) +{ + close(fd[0]); + close(fd[1]); +} + +static inline void dup_devnull(int to) +{ + int fd = open("/dev/null", O_RDWR); + dup2(fd, to); + close(fd); +} + +int start_command(struct child_process *cmd) +{ + int need_in, need_out, need_err; + int fdin[2], fdout[2], fderr[2]; + + /* + * In case of errors we must keep the promise to close FDs + * that have been passed in via ->in and ->out. + */ + + need_in = !cmd->no_stdin && cmd->in < 0; + if (need_in) { + if (pipe(fdin) < 0) { + if (cmd->out > 0) + close(cmd->out); + return -ERR_RUN_COMMAND_PIPE; + } + cmd->in = fdin[1]; + } + + need_out = !cmd->no_stdout + && !cmd->stdout_to_stderr + && cmd->out < 0; + if (need_out) { + if (pipe(fdout) < 0) { + if (need_in) + close_pair(fdin); + else if (cmd->in) + close(cmd->in); + return -ERR_RUN_COMMAND_PIPE; + } + cmd->out = fdout[0]; + } + + need_err = !cmd->no_stderr && cmd->err < 0; + if (need_err) { + if (pipe(fderr) < 0) { + if (need_in) + close_pair(fdin); + else if (cmd->in) + close(cmd->in); + if (need_out) + close_pair(fdout); + else if (cmd->out) + close(cmd->out); + return -ERR_RUN_COMMAND_PIPE; + } + cmd->err = fderr[0]; + } + +#ifndef __MINGW32__ + fflush(NULL); + cmd->pid = fork(); + if (!cmd->pid) { + if (cmd->no_stdin) + dup_devnull(0); + else if (need_in) { + dup2(fdin[0], 0); + close_pair(fdin); + } else if (cmd->in) { + dup2(cmd->in, 0); + close(cmd->in); + } + + if (cmd->no_stderr) + dup_devnull(2); + else if (need_err) { + dup2(fderr[1], 2); + close_pair(fderr); + } + + if (cmd->no_stdout) + dup_devnull(1); + else if (cmd->stdout_to_stderr) + dup2(2, 1); + else if (need_out) { + dup2(fdout[1], 1); + close_pair(fdout); + } else if (cmd->out > 1) { + dup2(cmd->out, 1); + close(cmd->out); + } + + if (cmd->dir && chdir(cmd->dir)) + die("exec %s: cd to %s failed (%s)", cmd->argv[0], + cmd->dir, strerror(errno)); + if (cmd->env) { + for (; *cmd->env; cmd->env++) { + if (strchr(*cmd->env, '=')) + putenv((char*)*cmd->env); + else + unsetenv(*cmd->env); + } + } + if (cmd->preexec_cb) + cmd->preexec_cb(); + if (cmd->perf_cmd) { + execv_perf_cmd(cmd->argv); + } else { + execvp(cmd->argv[0], (char *const*) cmd->argv); + } + exit(127); + } +#else + int s0 = -1, s1 = -1, s2 = -1; /* backups of stdin, stdout, stderr */ + const char **sargv = cmd->argv; + char **env = environ; + + if (cmd->no_stdin) { + s0 = dup(0); + dup_devnull(0); + } else if (need_in) { + s0 = dup(0); + dup2(fdin[0], 0); + } else if (cmd->in) { + s0 = dup(0); + dup2(cmd->in, 0); + } + + if (cmd->no_stderr) { + s2 = dup(2); + dup_devnull(2); + } else if (need_err) { + s2 = dup(2); + dup2(fderr[1], 2); + } + + if (cmd->no_stdout) { + s1 = dup(1); + dup_devnull(1); + } else if (cmd->stdout_to_stderr) { + s1 = dup(1); + dup2(2, 1); + } else if (need_out) { + s1 = dup(1); + dup2(fdout[1], 1); + } else if (cmd->out > 1) { + s1 = dup(1); + dup2(cmd->out, 1); + } + + if (cmd->dir) + die("chdir in start_command() not implemented"); + if (cmd->env) { + env = copy_environ(); + for (; *cmd->env; cmd->env++) + env = env_setenv(env, *cmd->env); + } + + if (cmd->perf_cmd) { + cmd->argv = prepare_perf_cmd(cmd->argv); + } + + cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env); + + if (cmd->env) + free_environ(env); + if (cmd->perf_cmd) + free(cmd->argv); + + cmd->argv = sargv; + if (s0 >= 0) + dup2(s0, 0), close(s0); + if (s1 >= 0) + dup2(s1, 1), close(s1); + if (s2 >= 0) + dup2(s2, 2), close(s2); +#endif + + if (cmd->pid < 0) { + int err = errno; + if (need_in) + close_pair(fdin); + else if (cmd->in) + close(cmd->in); + if (need_out) + close_pair(fdout); + else if (cmd->out) + close(cmd->out); + if (need_err) + close_pair(fderr); + return err == ENOENT ? + -ERR_RUN_COMMAND_EXEC : + -ERR_RUN_COMMAND_FORK; + } + + if (need_in) + close(fdin[0]); + else if (cmd->in) + close(cmd->in); + + if (need_out) + close(fdout[1]); + else if (cmd->out) + close(cmd->out); + + if (need_err) + close(fderr[1]); + + return 0; +} + +static int wait_or_whine(pid_t pid) +{ + for (;;) { + int status, code; + pid_t waiting = waitpid(pid, &status, 0); + + if (waiting < 0) { + if (errno == EINTR) + continue; + error("waitpid failed (%s)", strerror(errno)); + return -ERR_RUN_COMMAND_WAITPID; + } + if (waiting != pid) + return -ERR_RUN_COMMAND_WAITPID_WRONG_PID; + if (WIFSIGNALED(status)) + return -ERR_RUN_COMMAND_WAITPID_SIGNAL; + + if (!WIFEXITED(status)) + return -ERR_RUN_COMMAND_WAITPID_NOEXIT; + code = WEXITSTATUS(status); + switch (code) { + case 127: + return -ERR_RUN_COMMAND_EXEC; + case 0: + return 0; + default: + return -code; + } + } +} + +int finish_command(struct child_process *cmd) +{ + return wait_or_whine(cmd->pid); +} + +int run_command(struct child_process *cmd) +{ + int code = start_command(cmd); + if (code) + return code; + return finish_command(cmd); +} + +static void prepare_run_command_v_opt(struct child_process *cmd, + const char **argv, + int opt) +{ + memset(cmd, 0, sizeof(*cmd)); + cmd->argv = argv; + cmd->no_stdin = opt & RUN_COMMAND_NO_STDIN ? 1 : 0; + cmd->perf_cmd = opt & RUN_PERF_CMD ? 1 : 0; + cmd->stdout_to_stderr = opt & RUN_COMMAND_STDOUT_TO_STDERR ? 1 : 0; +} + +int run_command_v_opt(const char **argv, int opt) +{ + struct child_process cmd; + prepare_run_command_v_opt(&cmd, argv, opt); + return run_command(&cmd); +} + +int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const char *const *env) +{ + struct child_process cmd; + prepare_run_command_v_opt(&cmd, argv, opt); + cmd.dir = dir; + cmd.env = env; + return run_command(&cmd); +} + +#ifdef __MINGW32__ +static __stdcall unsigned run_thread(void *data) +{ + struct async *async = data; + return async->proc(async->fd_for_proc, async->data); +} +#endif + +int start_async(struct async *async) +{ + int pipe_out[2]; + + if (pipe(pipe_out) < 0) + return error("cannot create pipe: %s", strerror(errno)); + async->out = pipe_out[0]; + +#ifndef __MINGW32__ + /* Flush stdio before fork() to avoid cloning buffers */ + fflush(NULL); + + async->pid = fork(); + if (async->pid < 0) { + error("fork (async) failed: %s", strerror(errno)); + close_pair(pipe_out); + return -1; + } + if (!async->pid) { + close(pipe_out[0]); + exit(!!async->proc(pipe_out[1], async->data)); + } + close(pipe_out[1]); +#else + async->fd_for_proc = pipe_out[1]; + async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL); + if (!async->tid) { + error("cannot create thread: %s", strerror(errno)); + close_pair(pipe_out); + return -1; + } +#endif + return 0; +} + +int finish_async(struct async *async) +{ +#ifndef __MINGW32__ + int ret = 0; + + if (wait_or_whine(async->pid)) + ret = error("waitpid (async) failed"); +#else + DWORD ret = 0; + if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0) + ret = error("waiting for thread failed: %lu", GetLastError()); + else if (!GetExitCodeThread(async->tid, &ret)) + ret = error("cannot get thread exit code: %lu", GetLastError()); + CloseHandle(async->tid); +#endif + return ret; +} + +int run_hook(const char *index_file, const char *name, ...) +{ + struct child_process hook; + const char **argv = NULL, *env[2]; + char index[PATH_MAX]; + va_list args; + int ret; + size_t i = 0, alloc = 0; + + if (access(perf_path("hooks/%s", name), X_OK) < 0) + return 0; + + va_start(args, name); + ALLOC_GROW(argv, i + 1, alloc); + argv[i++] = perf_path("hooks/%s", name); + while (argv[i-1]) { + ALLOC_GROW(argv, i + 1, alloc); + argv[i++] = va_arg(args, const char *); + } + va_end(args); + + memset(&hook, 0, sizeof(hook)); + hook.argv = argv; + hook.no_stdin = 1; + hook.stdout_to_stderr = 1; + if (index_file) { + snprintf(index, sizeof(index), "PERF_INDEX_FILE=%s", index_file); + env[0] = index; + env[1] = NULL; + hook.env = env; + } + + ret = start_command(&hook); + free(argv); + if (ret) { + warning("Could not spawn %s", argv[0]); + return ret; + } + ret = finish_command(&hook); + if (ret == -ERR_RUN_COMMAND_WAITPID_SIGNAL) + warning("%s exited due to uncaught signal", argv[0]); + + return ret; +} diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h new file mode 100644 index 0000000..328289f --- /dev/null +++ b/tools/perf/util/run-command.h @@ -0,0 +1,93 @@ +#ifndef RUN_COMMAND_H +#define RUN_COMMAND_H + +enum { + ERR_RUN_COMMAND_FORK = 10000, + ERR_RUN_COMMAND_EXEC, + ERR_RUN_COMMAND_PIPE, + ERR_RUN_COMMAND_WAITPID, + ERR_RUN_COMMAND_WAITPID_WRONG_PID, + ERR_RUN_COMMAND_WAITPID_SIGNAL, + ERR_RUN_COMMAND_WAITPID_NOEXIT, +}; +#define IS_RUN_COMMAND_ERR(x) (-(x) >= ERR_RUN_COMMAND_FORK) + +struct child_process { + const char **argv; + pid_t pid; + /* + * Using .in, .out, .err: + * - Specify 0 for no redirections (child inherits stdin, stdout, + * stderr from parent). + * - Specify -1 to have a pipe allocated as follows: + * .in: returns the writable pipe end; parent writes to it, + * the readable pipe end becomes child's stdin + * .out, .err: returns the readable pipe end; parent reads from + * it, the writable pipe end becomes child's stdout/stderr + * The caller of start_command() must close the returned FDs + * after it has completed reading from/writing to it! + * - Specify > 0 to set a channel to a particular FD as follows: + * .in: a readable FD, becomes child's stdin + * .out: a writable FD, becomes child's stdout/stderr + * .err > 0 not supported + * The specified FD is closed by start_command(), even in case + * of errors! + */ + int in; + int out; + int err; + const char *dir; + const char *const *env; + unsigned no_stdin:1; + unsigned no_stdout:1; + unsigned no_stderr:1; + unsigned perf_cmd:1; /* if this is to be perf sub-command */ + unsigned stdout_to_stderr:1; + void (*preexec_cb)(void); +}; + +int start_command(struct child_process *); +int finish_command(struct child_process *); +int run_command(struct child_process *); + +extern int run_hook(const char *index_file, const char *name, ...); + +#define RUN_COMMAND_NO_STDIN 1 +#define RUN_PERF_CMD 2 /*If this is to be perf sub-command */ +#define RUN_COMMAND_STDOUT_TO_STDERR 4 +int run_command_v_opt(const char **argv, int opt); + +/* + * env (the environment) is to be formatted like environ: "VAR=VALUE". + * To unset an environment variable use just "VAR". + */ +int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const char *const *env); + +/* + * The purpose of the following functions is to feed a pipe by running + * a function asynchronously and providing output that the caller reads. + * + * It is expected that no synchronization and mutual exclusion between + * the caller and the feed function is necessary so that the function + * can run in a thread without interfering with the caller. + */ +struct async { + /* + * proc writes to fd and closes it; + * returns 0 on success, non-zero on failure + */ + int (*proc)(int fd, void *data); + void *data; + int out; /* caller reads from here and closes it */ +#ifndef __MINGW32__ + pid_t pid; +#else + HANDLE tid; + int fd_for_proc; +#endif +}; + +int start_async(struct async *async); +int finish_async(struct async *async); + +#endif diff --git a/tools/perf/util/sigchain.c b/tools/perf/util/sigchain.c new file mode 100644 index 0000000..1118b99 --- /dev/null +++ b/tools/perf/util/sigchain.c @@ -0,0 +1,52 @@ +#include "sigchain.h" +#include "cache.h" + +#define SIGCHAIN_MAX_SIGNALS 32 + +struct sigchain_signal { + sigchain_fun *old; + int n; + int alloc; +}; +static struct sigchain_signal signals[SIGCHAIN_MAX_SIGNALS]; + +static void check_signum(int sig) +{ + if (sig < 1 || sig >= SIGCHAIN_MAX_SIGNALS) + die("BUG: signal out of range: %d", sig); +} + +int sigchain_push(int sig, sigchain_fun f) +{ + struct sigchain_signal *s = signals + sig; + check_signum(sig); + + ALLOC_GROW(s->old, s->n + 1, s->alloc); + s->old[s->n] = signal(sig, f); + if (s->old[s->n] == SIG_ERR) + return -1; + s->n++; + return 0; +} + +int sigchain_pop(int sig) +{ + struct sigchain_signal *s = signals + sig; + check_signum(sig); + if (s->n < 1) + return 0; + + if (signal(sig, s->old[s->n - 1]) == SIG_ERR) + return -1; + s->n--; + return 0; +} + +void sigchain_push_common(sigchain_fun f) +{ + sigchain_push(SIGINT, f); + sigchain_push(SIGHUP, f); + sigchain_push(SIGTERM, f); + sigchain_push(SIGQUIT, f); + sigchain_push(SIGPIPE, f); +} diff --git a/tools/perf/util/sigchain.h b/tools/perf/util/sigchain.h new file mode 100644 index 0000000..618083b --- /dev/null +++ b/tools/perf/util/sigchain.h @@ -0,0 +1,11 @@ +#ifndef SIGCHAIN_H +#define SIGCHAIN_H + +typedef void (*sigchain_fun)(int); + +int sigchain_push(int sig, sigchain_fun f); +int sigchain_pop(int sig); + +void sigchain_push_common(sigchain_fun f); + +#endif /* SIGCHAIN_H */ diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c new file mode 100644 index 0000000..eaba093 --- /dev/null +++ b/tools/perf/util/strbuf.c @@ -0,0 +1,359 @@ +#include "cache.h" + +int prefixcmp(const char *str, const char *prefix) +{ + for (; ; str++, prefix++) + if (!*prefix) + return 0; + else if (*str != *prefix) + return (unsigned char)*prefix - (unsigned char)*str; +} + +/* + * Used as the default ->buf value, so that people can always assume + * buf is non NULL and ->buf is NUL terminated even for a freshly + * initialized strbuf. + */ +char strbuf_slopbuf[1]; + +void strbuf_init(struct strbuf *sb, size_t hint) +{ + sb->alloc = sb->len = 0; + sb->buf = strbuf_slopbuf; + if (hint) + strbuf_grow(sb, hint); +} + +void strbuf_release(struct strbuf *sb) +{ + if (sb->alloc) { + free(sb->buf); + strbuf_init(sb, 0); + } +} + +char *strbuf_detach(struct strbuf *sb, size_t *sz) +{ + char *res = sb->alloc ? sb->buf : NULL; + if (sz) + *sz = sb->len; + strbuf_init(sb, 0); + return res; +} + +void strbuf_attach(struct strbuf *sb, void *buf, size_t len, size_t alloc) +{ + strbuf_release(sb); + sb->buf = buf; + sb->len = len; + sb->alloc = alloc; + strbuf_grow(sb, 0); + sb->buf[sb->len] = '\0'; +} + +void strbuf_grow(struct strbuf *sb, size_t extra) +{ + if (sb->len + extra + 1 <= sb->len) + die("you want to use way too much memory"); + if (!sb->alloc) + sb->buf = NULL; + ALLOC_GROW(sb->buf, sb->len + extra + 1, sb->alloc); +} + +void strbuf_trim(struct strbuf *sb) +{ + char *b = sb->buf; + while (sb->len > 0 && isspace((unsigned char)sb->buf[sb->len - 1])) + sb->len--; + while (sb->len > 0 && isspace(*b)) { + b++; + sb->len--; + } + memmove(sb->buf, b, sb->len); + sb->buf[sb->len] = '\0'; +} +void strbuf_rtrim(struct strbuf *sb) +{ + while (sb->len > 0 && isspace((unsigned char)sb->buf[sb->len - 1])) + sb->len--; + sb->buf[sb->len] = '\0'; +} + +void strbuf_ltrim(struct strbuf *sb) +{ + char *b = sb->buf; + while (sb->len > 0 && isspace(*b)) { + b++; + sb->len--; + } + memmove(sb->buf, b, sb->len); + sb->buf[sb->len] = '\0'; +} + +void strbuf_tolower(struct strbuf *sb) +{ + int i; + for (i = 0; i < sb->len; i++) + sb->buf[i] = tolower(sb->buf[i]); +} + +struct strbuf **strbuf_split(const struct strbuf *sb, int delim) +{ + int alloc = 2, pos = 0; + char *n, *p; + struct strbuf **ret; + struct strbuf *t; + + ret = calloc(alloc, sizeof(struct strbuf *)); + p = n = sb->buf; + while (n < sb->buf + sb->len) { + int len; + n = memchr(n, delim, sb->len - (n - sb->buf)); + if (pos + 1 >= alloc) { + alloc = alloc * 2; + ret = realloc(ret, sizeof(struct strbuf *) * alloc); + } + if (!n) + n = sb->buf + sb->len - 1; + len = n - p + 1; + t = malloc(sizeof(struct strbuf)); + strbuf_init(t, len); + strbuf_add(t, p, len); + ret[pos] = t; + ret[++pos] = NULL; + p = ++n; + } + return ret; +} + +void strbuf_list_free(struct strbuf **sbs) +{ + struct strbuf **s = sbs; + + while (*s) { + strbuf_release(*s); + free(*s++); + } + free(sbs); +} + +int strbuf_cmp(const struct strbuf *a, const struct strbuf *b) +{ + int len = a->len < b->len ? a->len: b->len; + int cmp = memcmp(a->buf, b->buf, len); + if (cmp) + return cmp; + return a->len < b->len ? -1: a->len != b->len; +} + +void strbuf_splice(struct strbuf *sb, size_t pos, size_t len, + const void *data, size_t dlen) +{ + if (pos + len < pos) + die("you want to use way too much memory"); + if (pos > sb->len) + die("`pos' is too far after the end of the buffer"); + if (pos + len > sb->len) + die("`pos + len' is too far after the end of the buffer"); + + if (dlen >= len) + strbuf_grow(sb, dlen - len); + memmove(sb->buf + pos + dlen, + sb->buf + pos + len, + sb->len - pos - len); + memcpy(sb->buf + pos, data, dlen); + strbuf_setlen(sb, sb->len + dlen - len); +} + +void strbuf_insert(struct strbuf *sb, size_t pos, const void *data, size_t len) +{ + strbuf_splice(sb, pos, 0, data, len); +} + +void strbuf_remove(struct strbuf *sb, size_t pos, size_t len) +{ + strbuf_splice(sb, pos, len, NULL, 0); +} + +void strbuf_add(struct strbuf *sb, const void *data, size_t len) +{ + strbuf_grow(sb, len); + memcpy(sb->buf + sb->len, data, len); + strbuf_setlen(sb, sb->len + len); +} + +void strbuf_adddup(struct strbuf *sb, size_t pos, size_t len) +{ + strbuf_grow(sb, len); + memcpy(sb->buf + sb->len, sb->buf + pos, len); + strbuf_setlen(sb, sb->len + len); +} + +void strbuf_addf(struct strbuf *sb, const char *fmt, ...) +{ + int len; + va_list ap; + + if (!strbuf_avail(sb)) + strbuf_grow(sb, 64); + va_start(ap, fmt); + len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap); + va_end(ap); + if (len < 0) + die("your vsnprintf is broken"); + if (len > strbuf_avail(sb)) { + strbuf_grow(sb, len); + va_start(ap, fmt); + len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap); + va_end(ap); + if (len > strbuf_avail(sb)) { + die("this should not happen, your snprintf is broken"); + } + } + strbuf_setlen(sb, sb->len + len); +} + +void strbuf_expand(struct strbuf *sb, const char *format, expand_fn_t fn, + void *context) +{ + for (;;) { + const char *percent; + size_t consumed; + + percent = strchrnul(format, '%'); + strbuf_add(sb, format, percent - format); + if (!*percent) + break; + format = percent + 1; + + consumed = fn(sb, format, context); + if (consumed) + format += consumed; + else + strbuf_addch(sb, '%'); + } +} + +size_t strbuf_expand_dict_cb(struct strbuf *sb, const char *placeholder, + void *context) +{ + struct strbuf_expand_dict_entry *e = context; + size_t len; + + for (; e->placeholder && (len = strlen(e->placeholder)); e++) { + if (!strncmp(placeholder, e->placeholder, len)) { + if (e->value) + strbuf_addstr(sb, e->value); + return len; + } + } + return 0; +} + +size_t strbuf_fread(struct strbuf *sb, size_t size, FILE *f) +{ + size_t res; + size_t oldalloc = sb->alloc; + + strbuf_grow(sb, size); + res = fread(sb->buf + sb->len, 1, size, f); + if (res > 0) + strbuf_setlen(sb, sb->len + res); + else if (res < 0 && oldalloc == 0) + strbuf_release(sb); + return res; +} + +ssize_t strbuf_read(struct strbuf *sb, int fd, size_t hint) +{ + size_t oldlen = sb->len; + size_t oldalloc = sb->alloc; + + strbuf_grow(sb, hint ? hint : 8192); + for (;;) { + ssize_t cnt; + + cnt = read(fd, sb->buf + sb->len, sb->alloc - sb->len - 1); + if (cnt < 0) { + if (oldalloc == 0) + strbuf_release(sb); + else + strbuf_setlen(sb, oldlen); + return -1; + } + if (!cnt) + break; + sb->len += cnt; + strbuf_grow(sb, 8192); + } + + sb->buf[sb->len] = '\0'; + return sb->len - oldlen; +} + +#define STRBUF_MAXLINK (2*PATH_MAX) + +int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint) +{ + size_t oldalloc = sb->alloc; + + if (hint < 32) + hint = 32; + + while (hint < STRBUF_MAXLINK) { + int len; + + strbuf_grow(sb, hint); + len = readlink(path, sb->buf, hint); + if (len < 0) { + if (errno != ERANGE) + break; + } else if (len < hint) { + strbuf_setlen(sb, len); + return 0; + } + + /* .. the buffer was too small - try again */ + hint *= 2; + } + if (oldalloc == 0) + strbuf_release(sb); + return -1; +} + +int strbuf_getline(struct strbuf *sb, FILE *fp, int term) +{ + int ch; + + strbuf_grow(sb, 0); + if (feof(fp)) + return EOF; + + strbuf_reset(sb); + while ((ch = fgetc(fp)) != EOF) { + if (ch == term) + break; + strbuf_grow(sb, 1); + sb->buf[sb->len++] = ch; + } + if (ch == EOF && sb->len == 0) + return EOF; + + sb->buf[sb->len] = '\0'; + return 0; +} + +int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint) +{ + int fd, len; + + fd = open(path, O_RDONLY); + if (fd < 0) + return -1; + len = strbuf_read(sb, fd, hint); + close(fd); + if (len < 0) + return -1; + + return len; +} diff --git a/tools/perf/util/strbuf.h b/tools/perf/util/strbuf.h new file mode 100644 index 0000000..9ee908a --- /dev/null +++ b/tools/perf/util/strbuf.h @@ -0,0 +1,137 @@ +#ifndef STRBUF_H +#define STRBUF_H + +/* + * Strbuf's can be use in many ways: as a byte array, or to store arbitrary + * long, overflow safe strings. + * + * Strbufs has some invariants that are very important to keep in mind: + * + * 1. the ->buf member is always malloc-ed, hence strbuf's can be used to + * build complex strings/buffers whose final size isn't easily known. + * + * It is NOT legal to copy the ->buf pointer away. + * `strbuf_detach' is the operation that detachs a buffer from its shell + * while keeping the shell valid wrt its invariants. + * + * 2. the ->buf member is a byte array that has at least ->len + 1 bytes + * allocated. The extra byte is used to store a '\0', allowing the ->buf + * member to be a valid C-string. Every strbuf function ensure this + * invariant is preserved. + * + * Note that it is OK to "play" with the buffer directly if you work it + * that way: + * + * strbuf_grow(sb, SOME_SIZE); + * ... Here, the memory array starting at sb->buf, and of length + * ... strbuf_avail(sb) is all yours, and you are sure that + * ... strbuf_avail(sb) is at least SOME_SIZE. + * strbuf_setlen(sb, sb->len + SOME_OTHER_SIZE); + * + * Of course, SOME_OTHER_SIZE must be smaller or equal to strbuf_avail(sb). + * + * Doing so is safe, though if it has to be done in many places, adding the + * missing API to the strbuf module is the way to go. + * + * XXX: do _not_ assume that the area that is yours is of size ->alloc - 1 + * even if it's true in the current implementation. Alloc is somehow a + * "private" member that should not be messed with. + */ + +#include + +extern char strbuf_slopbuf[]; +struct strbuf { + size_t alloc; + size_t len; + char *buf; +}; + +#define STRBUF_INIT { 0, 0, strbuf_slopbuf } + +/*----- strbuf life cycle -----*/ +extern void strbuf_init(struct strbuf *, size_t); +extern void strbuf_release(struct strbuf *); +extern char *strbuf_detach(struct strbuf *, size_t *); +extern void strbuf_attach(struct strbuf *, void *, size_t, size_t); +static inline void strbuf_swap(struct strbuf *a, struct strbuf *b) { + struct strbuf tmp = *a; + *a = *b; + *b = tmp; +} + +/*----- strbuf size related -----*/ +static inline size_t strbuf_avail(const struct strbuf *sb) { + return sb->alloc ? sb->alloc - sb->len - 1 : 0; +} + +extern void strbuf_grow(struct strbuf *, size_t); + +static inline void strbuf_setlen(struct strbuf *sb, size_t len) { + if (!sb->alloc) + strbuf_grow(sb, 0); + assert(len < sb->alloc); + sb->len = len; + sb->buf[len] = '\0'; +} +#define strbuf_reset(sb) strbuf_setlen(sb, 0) + +/*----- content related -----*/ +extern void strbuf_trim(struct strbuf *); +extern void strbuf_rtrim(struct strbuf *); +extern void strbuf_ltrim(struct strbuf *); +extern int strbuf_cmp(const struct strbuf *, const struct strbuf *); +extern void strbuf_tolower(struct strbuf *); + +extern struct strbuf **strbuf_split(const struct strbuf *, int delim); +extern void strbuf_list_free(struct strbuf **); + +/*----- add data in your buffer -----*/ +static inline void strbuf_addch(struct strbuf *sb, int c) { + strbuf_grow(sb, 1); + sb->buf[sb->len++] = c; + sb->buf[sb->len] = '\0'; +} + +extern void strbuf_insert(struct strbuf *, size_t pos, const void *, size_t); +extern void strbuf_remove(struct strbuf *, size_t pos, size_t len); + +/* splice pos..pos+len with given data */ +extern void strbuf_splice(struct strbuf *, size_t pos, size_t len, + const void *, size_t); + +extern void strbuf_add(struct strbuf *, const void *, size_t); +static inline void strbuf_addstr(struct strbuf *sb, const char *s) { + strbuf_add(sb, s, strlen(s)); +} +static inline void strbuf_addbuf(struct strbuf *sb, const struct strbuf *sb2) { + strbuf_add(sb, sb2->buf, sb2->len); +} +extern void strbuf_adddup(struct strbuf *sb, size_t pos, size_t len); + +typedef size_t (*expand_fn_t) (struct strbuf *sb, const char *placeholder, void *context); +extern void strbuf_expand(struct strbuf *sb, const char *format, expand_fn_t fn, void *context); +struct strbuf_expand_dict_entry { + const char *placeholder; + const char *value; +}; +extern size_t strbuf_expand_dict_cb(struct strbuf *sb, const char *placeholder, void *context); + +__attribute__((format(printf,2,3))) +extern void strbuf_addf(struct strbuf *sb, const char *fmt, ...); + +extern size_t strbuf_fread(struct strbuf *, size_t, FILE *); +/* XXX: if read fails, any partial read is undone */ +extern ssize_t strbuf_read(struct strbuf *, int fd, size_t hint); +extern int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint); +extern int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint); + +extern int strbuf_getline(struct strbuf *, FILE *, int); + +extern void stripspace(struct strbuf *buf, int skip_comments); +extern int launch_editor(const char *path, struct strbuf *buffer, const char *const *env); + +extern int strbuf_branchname(struct strbuf *sb, const char *name); +extern int strbuf_check_branch_ref(struct strbuf *sb, const char *name); + +#endif /* STRBUF_H */ diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c new file mode 100644 index 0000000..ec33c0c --- /dev/null +++ b/tools/perf/util/string.c @@ -0,0 +1,34 @@ +#include "string.h" + +static int hex(char ch) +{ + if ((ch >= '0') && (ch <= '9')) + return ch - '0'; + if ((ch >= 'a') && (ch <= 'f')) + return ch - 'a' + 10; + if ((ch >= 'A') && (ch <= 'F')) + return ch - 'A' + 10; + return -1; +} + +/* + * While we find nice hex chars, build a long_val. + * Return number of chars processed. + */ +int hex2u64(const char *ptr, __u64 *long_val) +{ + const char *p = ptr; + *long_val = 0; + + while (*p) { + const int hex_val = hex(*p); + + if (hex_val < 0) + break; + + *long_val = (*long_val << 4) | hex_val; + p++; + } + + return p - ptr; +} diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h new file mode 100644 index 0000000..72812c1 --- /dev/null +++ b/tools/perf/util/string.h @@ -0,0 +1,8 @@ +#ifndef _PERF_STRING_H_ +#define _PERF_STRING_H_ + +#include + +int hex2u64(const char *ptr, __u64 *val); + +#endif diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c new file mode 100644 index 0000000..49a55f8 --- /dev/null +++ b/tools/perf/util/symbol.c @@ -0,0 +1,641 @@ +#include "util.h" +#include "../perf.h" +#include "string.h" +#include "symbol.h" + +#include +#include +#include + +const char *sym_hist_filter; + +static struct symbol *symbol__new(__u64 start, __u64 len, + const char *name, unsigned int priv_size, + __u64 obj_start, int verbose) +{ + size_t namelen = strlen(name) + 1; + struct symbol *self = calloc(1, priv_size + sizeof(*self) + namelen); + + if (!self) + return NULL; + + if (verbose >= 2) + printf("new symbol: %016Lx [%08lx]: %s, hist: %p, obj_start: %p\n", + (__u64)start, (unsigned long)len, name, self->hist, (void *)(unsigned long)obj_start); + + self->obj_start= obj_start; + self->hist = NULL; + self->hist_sum = 0; + + if (sym_hist_filter && !strcmp(name, sym_hist_filter)) + self->hist = calloc(sizeof(__u64), len); + + if (priv_size) { + memset(self, 0, priv_size); + self = ((void *)self) + priv_size; + } + self->start = start; + self->end = start + len - 1; + memcpy(self->name, name, namelen); + + return self; +} + +static void symbol__delete(struct symbol *self, unsigned int priv_size) +{ + free(((void *)self) - priv_size); +} + +static size_t symbol__fprintf(struct symbol *self, FILE *fp) +{ + return fprintf(fp, " %llx-%llx %s\n", + self->start, self->end, self->name); +} + +struct dso *dso__new(const char *name, unsigned int sym_priv_size) +{ + struct dso *self = malloc(sizeof(*self) + strlen(name) + 1); + + if (self != NULL) { + strcpy(self->name, name); + self->syms = RB_ROOT; + self->sym_priv_size = sym_priv_size; + self->find_symbol = dso__find_symbol; + } + + return self; +} + +static void dso__delete_symbols(struct dso *self) +{ + struct symbol *pos; + struct rb_node *next = rb_first(&self->syms); + + while (next) { + pos = rb_entry(next, struct symbol, rb_node); + next = rb_next(&pos->rb_node); + rb_erase(&pos->rb_node, &self->syms); + symbol__delete(pos, self->sym_priv_size); + } +} + +void dso__delete(struct dso *self) +{ + dso__delete_symbols(self); + free(self); +} + +static void dso__insert_symbol(struct dso *self, struct symbol *sym) +{ + struct rb_node **p = &self->syms.rb_node; + struct rb_node *parent = NULL; + const __u64 ip = sym->start; + struct symbol *s; + + while (*p != NULL) { + parent = *p; + s = rb_entry(parent, struct symbol, rb_node); + if (ip < s->start) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + rb_link_node(&sym->rb_node, parent, p); + rb_insert_color(&sym->rb_node, &self->syms); +} + +struct symbol *dso__find_symbol(struct dso *self, __u64 ip) +{ + struct rb_node *n; + + if (self == NULL) + return NULL; + + n = self->syms.rb_node; + + while (n) { + struct symbol *s = rb_entry(n, struct symbol, rb_node); + + if (ip < s->start) + n = n->rb_left; + else if (ip > s->end) + n = n->rb_right; + else + return s; + } + + return NULL; +} + +size_t dso__fprintf(struct dso *self, FILE *fp) +{ + size_t ret = fprintf(fp, "dso: %s\n", self->name); + + struct rb_node *nd; + for (nd = rb_first(&self->syms); nd; nd = rb_next(nd)) { + struct symbol *pos = rb_entry(nd, struct symbol, rb_node); + ret += symbol__fprintf(pos, fp); + } + + return ret; +} + +static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int verbose) +{ + struct rb_node *nd, *prevnd; + char *line = NULL; + size_t n; + FILE *file = fopen("/proc/kallsyms", "r"); + + if (file == NULL) + goto out_failure; + + while (!feof(file)) { + __u64 start; + struct symbol *sym; + int line_len, len; + char symbol_type; + + line_len = getline(&line, &n, file); + if (line_len < 0) + break; + + if (!line) + goto out_failure; + + line[--line_len] = '\0'; /* \n */ + + len = hex2u64(line, &start); + + len++; + if (len + 2 >= line_len) + continue; + + symbol_type = toupper(line[len]); + /* + * We're interested only in code ('T'ext) + */ + if (symbol_type != 'T' && symbol_type != 'W') + continue; + /* + * Well fix up the end later, when we have all sorted. + */ + sym = symbol__new(start, 0xdead, line + len + 2, + self->sym_priv_size, 0, verbose); + + if (sym == NULL) + goto out_delete_line; + + if (filter && filter(self, sym)) + symbol__delete(sym, self->sym_priv_size); + else + dso__insert_symbol(self, sym); + } + + /* + * Now that we have all sorted out, just set the ->end of all + * symbols + */ + prevnd = rb_first(&self->syms); + + if (prevnd == NULL) + goto out_delete_line; + + for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) { + struct symbol *prev = rb_entry(prevnd, struct symbol, rb_node), + *curr = rb_entry(nd, struct symbol, rb_node); + + prev->end = curr->start - 1; + prevnd = nd; + } + + free(line); + fclose(file); + + return 0; + +out_delete_line: + free(line); +out_failure: + return -1; +} + +static int dso__load_perf_map(struct dso *self, symbol_filter_t filter, int verbose) +{ + char *line = NULL; + size_t n; + FILE *file; + int nr_syms = 0; + + file = fopen(self->name, "r"); + if (file == NULL) + goto out_failure; + + while (!feof(file)) { + __u64 start, size; + struct symbol *sym; + int line_len, len; + + line_len = getline(&line, &n, file); + if (line_len < 0) + break; + + if (!line) + goto out_failure; + + line[--line_len] = '\0'; /* \n */ + + len = hex2u64(line, &start); + + len++; + if (len + 2 >= line_len) + continue; + + len += hex2u64(line + len, &size); + + len++; + if (len + 2 >= line_len) + continue; + + sym = symbol__new(start, size, line + len, + self->sym_priv_size, start, verbose); + + if (sym == NULL) + goto out_delete_line; + + if (filter && filter(self, sym)) + symbol__delete(sym, self->sym_priv_size); + else { + dso__insert_symbol(self, sym); + nr_syms++; + } + } + + free(line); + fclose(file); + + return nr_syms; + +out_delete_line: + free(line); +out_failure: + return -1; +} + +/** + * elf_symtab__for_each_symbol - iterate thru all the symbols + * + * @self: struct elf_symtab instance to iterate + * @index: uint32_t index + * @sym: GElf_Sym iterator + */ +#define elf_symtab__for_each_symbol(syms, nr_syms, index, sym) \ + for (index = 0, gelf_getsym(syms, index, &sym);\ + index < nr_syms; \ + index++, gelf_getsym(syms, index, &sym)) + +static inline uint8_t elf_sym__type(const GElf_Sym *sym) +{ + return GELF_ST_TYPE(sym->st_info); +} + +static inline int elf_sym__is_function(const GElf_Sym *sym) +{ + return elf_sym__type(sym) == STT_FUNC && + sym->st_name != 0 && + sym->st_shndx != SHN_UNDEF && + sym->st_size != 0; +} + +static inline const char *elf_sym__name(const GElf_Sym *sym, + const Elf_Data *symstrs) +{ + return symstrs->d_buf + sym->st_name; +} + +static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep, + GElf_Shdr *shp, const char *name, + size_t *index) +{ + Elf_Scn *sec = NULL; + size_t cnt = 1; + + while ((sec = elf_nextscn(elf, sec)) != NULL) { + char *str; + + gelf_getshdr(sec, shp); + str = elf_strptr(elf, ep->e_shstrndx, shp->sh_name); + if (!strcmp(name, str)) { + if (index) + *index = cnt; + break; + } + ++cnt; + } + + return sec; +} + +#define elf_section__for_each_rel(reldata, pos, pos_mem, idx, nr_entries) \ + for (idx = 0, pos = gelf_getrel(reldata, 0, &pos_mem); \ + idx < nr_entries; \ + ++idx, pos = gelf_getrel(reldata, idx, &pos_mem)) + +#define elf_section__for_each_rela(reldata, pos, pos_mem, idx, nr_entries) \ + for (idx = 0, pos = gelf_getrela(reldata, 0, &pos_mem); \ + idx < nr_entries; \ + ++idx, pos = gelf_getrela(reldata, idx, &pos_mem)) + +static int dso__synthesize_plt_symbols(struct dso *self, Elf *elf, + GElf_Ehdr *ehdr, Elf_Scn *scn_dynsym, + GElf_Shdr *shdr_dynsym, + size_t dynsym_idx, int verbose) +{ + uint32_t nr_rel_entries, idx; + GElf_Sym sym; + __u64 plt_offset; + GElf_Shdr shdr_plt; + struct symbol *f; + GElf_Shdr shdr_rel_plt; + Elf_Data *reldata, *syms, *symstrs; + Elf_Scn *scn_plt_rel, *scn_symstrs; + char sympltname[1024]; + int nr = 0, symidx; + + scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt, + ".rela.plt", NULL); + if (scn_plt_rel == NULL) { + scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt, + ".rel.plt", NULL); + if (scn_plt_rel == NULL) + return 0; + } + + if (shdr_rel_plt.sh_link != dynsym_idx) + return 0; + + if (elf_section_by_name(elf, ehdr, &shdr_plt, ".plt", NULL) == NULL) + return 0; + + /* + * Fetch the relocation section to find the indexes to the GOT + * and the symbols in the .dynsym they refer to. + */ + reldata = elf_getdata(scn_plt_rel, NULL); + if (reldata == NULL) + return -1; + + syms = elf_getdata(scn_dynsym, NULL); + if (syms == NULL) + return -1; + + scn_symstrs = elf_getscn(elf, shdr_dynsym->sh_link); + if (scn_symstrs == NULL) + return -1; + + symstrs = elf_getdata(scn_symstrs, NULL); + if (symstrs == NULL) + return -1; + + nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize; + plt_offset = shdr_plt.sh_offset; + + if (shdr_rel_plt.sh_type == SHT_RELA) { + GElf_Rela pos_mem, *pos; + + elf_section__for_each_rela(reldata, pos, pos_mem, idx, + nr_rel_entries) { + symidx = GELF_R_SYM(pos->r_info); + plt_offset += shdr_plt.sh_entsize; + gelf_getsym(syms, symidx, &sym); + snprintf(sympltname, sizeof(sympltname), + "%s@plt", elf_sym__name(&sym, symstrs)); + + f = symbol__new(plt_offset, shdr_plt.sh_entsize, + sympltname, self->sym_priv_size, 0, verbose); + if (!f) + return -1; + + dso__insert_symbol(self, f); + ++nr; + } + } else if (shdr_rel_plt.sh_type == SHT_REL) { + GElf_Rel pos_mem, *pos; + elf_section__for_each_rel(reldata, pos, pos_mem, idx, + nr_rel_entries) { + symidx = GELF_R_SYM(pos->r_info); + plt_offset += shdr_plt.sh_entsize; + gelf_getsym(syms, symidx, &sym); + snprintf(sympltname, sizeof(sympltname), + "%s@plt", elf_sym__name(&sym, symstrs)); + + f = symbol__new(plt_offset, shdr_plt.sh_entsize, + sympltname, self->sym_priv_size, 0, verbose); + if (!f) + return -1; + + dso__insert_symbol(self, f); + ++nr; + } + } else { + /* + * TODO: There are still one more shdr_rel_plt.sh_type + * I have to investigate, but probably should be ignored. + */ + } + + return nr; +} + +static int dso__load_sym(struct dso *self, int fd, const char *name, + symbol_filter_t filter, int verbose) +{ + Elf_Data *symstrs; + uint32_t nr_syms; + int err = -1; + uint32_t index; + GElf_Ehdr ehdr; + GElf_Shdr shdr; + Elf_Data *syms; + GElf_Sym sym; + Elf_Scn *sec, *sec_dynsym; + Elf *elf; + size_t dynsym_idx; + int nr = 0; + + elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + if (elf == NULL) { + if (verbose) + fprintf(stderr, "%s: cannot read %s ELF file.\n", + __func__, name); + goto out_close; + } + + if (gelf_getehdr(elf, &ehdr) == NULL) { + if (verbose) + fprintf(stderr, "%s: cannot get elf header.\n", __func__); + goto out_elf_end; + } + + /* + * We need to check if we have a .dynsym, so that we can handle the + * .plt, synthesizing its symbols, that aren't on the symtabs (be it + * .dynsym or .symtab) + */ + sec_dynsym = elf_section_by_name(elf, &ehdr, &shdr, + ".dynsym", &dynsym_idx); + if (sec_dynsym != NULL) { + nr = dso__synthesize_plt_symbols(self, elf, &ehdr, + sec_dynsym, &shdr, + dynsym_idx, verbose); + if (nr < 0) + goto out_elf_end; + } + + /* + * But if we have a full .symtab (that is a superset of .dynsym) we + * should add the symbols not in the .dynsyn + */ + sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL); + if (sec == NULL) { + if (sec_dynsym == NULL) + goto out_elf_end; + + sec = sec_dynsym; + gelf_getshdr(sec, &shdr); + } + + syms = elf_getdata(sec, NULL); + if (syms == NULL) + goto out_elf_end; + + sec = elf_getscn(elf, shdr.sh_link); + if (sec == NULL) + goto out_elf_end; + + symstrs = elf_getdata(sec, NULL); + if (symstrs == NULL) + goto out_elf_end; + + nr_syms = shdr.sh_size / shdr.sh_entsize; + + memset(&sym, 0, sizeof(sym)); + + elf_symtab__for_each_symbol(syms, nr_syms, index, sym) { + struct symbol *f; + __u64 obj_start; + + if (!elf_sym__is_function(&sym)) + continue; + + sec = elf_getscn(elf, sym.st_shndx); + if (!sec) + goto out_elf_end; + + gelf_getshdr(sec, &shdr); + obj_start = sym.st_value; + + sym.st_value -= shdr.sh_addr - shdr.sh_offset; + + f = symbol__new(sym.st_value, sym.st_size, + elf_sym__name(&sym, symstrs), + self->sym_priv_size, obj_start, verbose); + if (!f) + goto out_elf_end; + + if (filter && filter(self, f)) + symbol__delete(f, self->sym_priv_size); + else { + dso__insert_symbol(self, f); + nr++; + } + } + + err = nr; +out_elf_end: + elf_end(elf); +out_close: + return err; +} + +int dso__load(struct dso *self, symbol_filter_t filter, int verbose) +{ + int size = strlen(self->name) + sizeof("/usr/lib/debug%s.debug"); + char *name = malloc(size); + int variant = 0; + int ret = -1; + int fd; + + if (!name) + return -1; + + if (strncmp(self->name, "/tmp/perf-", 10) == 0) + return dso__load_perf_map(self, filter, verbose); + +more: + do { + switch (variant) { + case 0: /* Fedora */ + snprintf(name, size, "/usr/lib/debug%s.debug", self->name); + break; + case 1: /* Ubuntu */ + snprintf(name, size, "/usr/lib/debug%s", self->name); + break; + case 2: /* Sane people */ + snprintf(name, size, "%s", self->name); + break; + + default: + goto out; + } + variant++; + + fd = open(name, O_RDONLY); + } while (fd < 0); + + ret = dso__load_sym(self, fd, name, filter, verbose); + close(fd); + + /* + * Some people seem to have debuginfo files _WITHOUT_ debug info!?!? + */ + if (!ret) + goto more; + +out: + free(name); + return ret; +} + +static int dso__load_vmlinux(struct dso *self, const char *vmlinux, + symbol_filter_t filter, int verbose) +{ + int err, fd = open(vmlinux, O_RDONLY); + + if (fd < 0) + return -1; + + err = dso__load_sym(self, fd, vmlinux, filter, verbose); + close(fd); + + return err; +} + +int dso__load_kernel(struct dso *self, const char *vmlinux, + symbol_filter_t filter, int verbose) +{ + int err = -1; + + if (vmlinux) + err = dso__load_vmlinux(self, vmlinux, filter, verbose); + + if (err) + err = dso__load_kallsyms(self, filter, verbose); + + return err; +} + +void symbol__init(void) +{ + elf_version(EV_CURRENT); +} diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h new file mode 100644 index 0000000..0d1292b --- /dev/null +++ b/tools/perf/util/symbol.h @@ -0,0 +1,47 @@ +#ifndef _PERF_SYMBOL_ +#define _PERF_SYMBOL_ 1 + +#include +#include "list.h" +#include "rbtree.h" + +struct symbol { + struct rb_node rb_node; + __u64 start; + __u64 end; + __u64 obj_start; + __u64 hist_sum; + __u64 *hist; + char name[0]; +}; + +struct dso { + struct list_head node; + struct rb_root syms; + unsigned int sym_priv_size; + struct symbol *(*find_symbol)(struct dso *, __u64 ip); + char name[0]; +}; + +const char *sym_hist_filter; + +typedef int (*symbol_filter_t)(struct dso *self, struct symbol *sym); + +struct dso *dso__new(const char *name, unsigned int sym_priv_size); +void dso__delete(struct dso *self); + +static inline void *dso__sym_priv(struct dso *self, struct symbol *sym) +{ + return ((void *)sym) - self->sym_priv_size; +} + +struct symbol *dso__find_symbol(struct dso *self, __u64 ip); + +int dso__load_kernel(struct dso *self, const char *vmlinux, + symbol_filter_t filter, int verbose); +int dso__load(struct dso *self, symbol_filter_t filter, int verbose); + +size_t dso__fprintf(struct dso *self, FILE *fp); + +void symbol__init(void); +#endif /* _PERF_SYMBOL_ */ diff --git a/tools/perf/util/usage.c b/tools/perf/util/usage.c new file mode 100644 index 0000000..e16bf9a --- /dev/null +++ b/tools/perf/util/usage.c @@ -0,0 +1,80 @@ +/* + * GIT - The information manager from hell + * + * Copyright (C) Linus Torvalds, 2005 + */ +#include "util.h" + +static void report(const char *prefix, const char *err, va_list params) +{ + char msg[1024]; + vsnprintf(msg, sizeof(msg), err, params); + fprintf(stderr, " %s%s\n", prefix, msg); +} + +static NORETURN void usage_builtin(const char *err) +{ + fprintf(stderr, "\n Usage: %s\n", err); + exit(129); +} + +static NORETURN void die_builtin(const char *err, va_list params) +{ + report(" Fatal: ", err, params); + exit(128); +} + +static void error_builtin(const char *err, va_list params) +{ + report(" Error: ", err, params); +} + +static void warn_builtin(const char *warn, va_list params) +{ + report(" Warning: ", warn, params); +} + +/* If we are in a dlopen()ed .so write to a global variable would segfault + * (ugh), so keep things static. */ +static void (*usage_routine)(const char *err) NORETURN = usage_builtin; +static void (*die_routine)(const char *err, va_list params) NORETURN = die_builtin; +static void (*error_routine)(const char *err, va_list params) = error_builtin; +static void (*warn_routine)(const char *err, va_list params) = warn_builtin; + +void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN) +{ + die_routine = routine; +} + +void usage(const char *err) +{ + usage_routine(err); +} + +void die(const char *err, ...) +{ + va_list params; + + va_start(params, err); + die_routine(err, params); + va_end(params); +} + +int error(const char *err, ...) +{ + va_list params; + + va_start(params, err); + error_routine(err, params); + va_end(params); + return -1; +} + +void warning(const char *warn, ...) +{ + va_list params; + + va_start(params, warn); + warn_routine(warn, params); + va_end(params); +} diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h new file mode 100644 index 0000000..76590a1 --- /dev/null +++ b/tools/perf/util/util.h @@ -0,0 +1,410 @@ +#ifndef GIT_COMPAT_UTIL_H +#define GIT_COMPAT_UTIL_H + +#define _FILE_OFFSET_BITS 64 + +#ifndef FLEX_ARRAY +/* + * See if our compiler is known to support flexible array members. + */ +#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) +# define FLEX_ARRAY /* empty */ +#elif defined(__GNUC__) +# if (__GNUC__ >= 3) +# define FLEX_ARRAY /* empty */ +# else +# define FLEX_ARRAY 0 /* older GNU extension */ +# endif +#endif + +/* + * Otherwise, default to safer but a bit wasteful traditional style + */ +#ifndef FLEX_ARRAY +# define FLEX_ARRAY 1 +#endif +#endif + +#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0])) + +#ifdef __GNUC__ +#define TYPEOF(x) (__typeof__(x)) +#else +#define TYPEOF(x) +#endif + +#define MSB(x, bits) ((x) & TYPEOF(x)(~0ULL << (sizeof(x) * 8 - (bits)))) +#define HAS_MULTI_BITS(i) ((i) & ((i) - 1)) /* checks if an integer has more than 1 bit set */ + +/* Approximation of the length of the decimal representation of this type. */ +#define decimal_length(x) ((int)(sizeof(x) * 2.56 + 0.5) + 1) + +#if !defined(__APPLE__) && !defined(__FreeBSD__) && !defined(__USLC__) && !defined(_M_UNIX) +#define _XOPEN_SOURCE 600 /* glibc2 and AIX 5.3L need 500, OpenBSD needs 600 for S_ISLNK() */ +#define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */ +#endif +#define _ALL_SOURCE 1 +#define _GNU_SOURCE 1 +#define _BSD_SOURCE 1 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifndef __MINGW32__ +#include +#include +#include +#include +#ifndef NO_SYS_SELECT_H +#include +#endif +#include +#include +#include +#include +#include +#include +#if defined(__CYGWIN__) +#undef _XOPEN_SOURCE +#include +#define _XOPEN_SOURCE 600 +#include "compat/cygwin.h" +#else +#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */ +#include +#define _ALL_SOURCE 1 +#endif +#else /* __MINGW32__ */ +/* pull in Windows compatibility stuff */ +#include "compat/mingw.h" +#endif /* __MINGW32__ */ + +#ifndef NO_ICONV +#include +#endif + +#ifndef NO_OPENSSL +#include +#include +#endif + +/* On most systems would have given us this, but + * not on some systems (e.g. GNU/Hurd). + */ +#ifndef PATH_MAX +#define PATH_MAX 4096 +#endif + +#ifndef PRIuMAX +#define PRIuMAX "llu" +#endif + +#ifndef PRIu32 +#define PRIu32 "u" +#endif + +#ifndef PRIx32 +#define PRIx32 "x" +#endif + +#ifndef PATH_SEP +#define PATH_SEP ':' +#endif + +#ifndef STRIP_EXTENSION +#define STRIP_EXTENSION "" +#endif + +#ifndef has_dos_drive_prefix +#define has_dos_drive_prefix(path) 0 +#endif + +#ifndef is_dir_sep +#define is_dir_sep(c) ((c) == '/') +#endif + +#ifdef __GNUC__ +#define NORETURN __attribute__((__noreturn__)) +#else +#define NORETURN +#ifndef __attribute__ +#define __attribute__(x) +#endif +#endif + +/* General helper functions */ +extern void usage(const char *err) NORETURN; +extern void die(const char *err, ...) NORETURN __attribute__((format (printf, 1, 2))); +extern int error(const char *err, ...) __attribute__((format (printf, 1, 2))); +extern void warning(const char *err, ...) __attribute__((format (printf, 1, 2))); + +extern void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN); + +extern int prefixcmp(const char *str, const char *prefix); +extern time_t tm_to_time_t(const struct tm *tm); + +static inline const char *skip_prefix(const char *str, const char *prefix) +{ + size_t len = strlen(prefix); + return strncmp(str, prefix, len) ? NULL : str + len; +} + +#if defined(NO_MMAP) || defined(USE_WIN32_MMAP) + +#ifndef PROT_READ +#define PROT_READ 1 +#define PROT_WRITE 2 +#define MAP_PRIVATE 1 +#define MAP_FAILED ((void*)-1) +#endif + +#define mmap git_mmap +#define munmap git_munmap +extern void *git_mmap(void *start, size_t length, int prot, int flags, int fd, off_t offset); +extern int git_munmap(void *start, size_t length); + +#else /* NO_MMAP || USE_WIN32_MMAP */ + +#include + +#endif /* NO_MMAP || USE_WIN32_MMAP */ + +#ifdef NO_MMAP + +/* This value must be multiple of (pagesize * 2) */ +#define DEFAULT_PACKED_GIT_WINDOW_SIZE (1 * 1024 * 1024) + +#else /* NO_MMAP */ + +/* This value must be multiple of (pagesize * 2) */ +#define DEFAULT_PACKED_GIT_WINDOW_SIZE \ + (sizeof(void*) >= 8 \ + ? 1 * 1024 * 1024 * 1024 \ + : 32 * 1024 * 1024) + +#endif /* NO_MMAP */ + +#ifdef NO_ST_BLOCKS_IN_STRUCT_STAT +#define on_disk_bytes(st) ((st).st_size) +#else +#define on_disk_bytes(st) ((st).st_blocks * 512) +#endif + +#define DEFAULT_PACKED_GIT_LIMIT \ + ((1024L * 1024L) * (sizeof(void*) >= 8 ? 8192 : 256)) + +#ifdef NO_PREAD +#define pread git_pread +extern ssize_t git_pread(int fd, void *buf, size_t count, off_t offset); +#endif +/* + * Forward decl that will remind us if its twin in cache.h changes. + * This function is used in compat/pread.c. But we can't include + * cache.h there. + */ +extern ssize_t read_in_full(int fd, void *buf, size_t count); + +#ifdef NO_SETENV +#define setenv gitsetenv +extern int gitsetenv(const char *, const char *, int); +#endif + +#ifdef NO_MKDTEMP +#define mkdtemp gitmkdtemp +extern char *gitmkdtemp(char *); +#endif + +#ifdef NO_UNSETENV +#define unsetenv gitunsetenv +extern void gitunsetenv(const char *); +#endif + +#ifdef NO_STRCASESTR +#define strcasestr gitstrcasestr +extern char *gitstrcasestr(const char *haystack, const char *needle); +#endif + +#ifdef NO_STRLCPY +#define strlcpy gitstrlcpy +extern size_t gitstrlcpy(char *, const char *, size_t); +#endif + +#ifdef NO_STRTOUMAX +#define strtoumax gitstrtoumax +extern uintmax_t gitstrtoumax(const char *, char **, int); +#endif + +#ifdef NO_HSTRERROR +#define hstrerror githstrerror +extern const char *githstrerror(int herror); +#endif + +#ifdef NO_MEMMEM +#define memmem gitmemmem +void *gitmemmem(const void *haystack, size_t haystacklen, + const void *needle, size_t needlelen); +#endif + +#ifdef FREAD_READS_DIRECTORIES +#ifdef fopen +#undef fopen +#endif +#define fopen(a,b) git_fopen(a,b) +extern FILE *git_fopen(const char*, const char*); +#endif + +#ifdef SNPRINTF_RETURNS_BOGUS +#define snprintf git_snprintf +extern int git_snprintf(char *str, size_t maxsize, + const char *format, ...); +#define vsnprintf git_vsnprintf +extern int git_vsnprintf(char *str, size_t maxsize, + const char *format, va_list ap); +#endif + +#ifdef __GLIBC_PREREQ +#if __GLIBC_PREREQ(2, 1) +#define HAVE_STRCHRNUL +#endif +#endif + +#ifndef HAVE_STRCHRNUL +#define strchrnul gitstrchrnul +static inline char *gitstrchrnul(const char *s, int c) +{ + while (*s && *s != c) + s++; + return (char *)s; +} +#endif + +/* + * Wrappers: + */ +extern char *xstrdup(const char *str); +extern void *xmalloc(size_t size); +extern void *xmemdupz(const void *data, size_t len); +extern char *xstrndup(const char *str, size_t len); +extern void *xrealloc(void *ptr, size_t size); +extern void *xcalloc(size_t nmemb, size_t size); +extern void *xmmap(void *start, size_t length, int prot, int flags, int fd, off_t offset); +extern ssize_t xread(int fd, void *buf, size_t len); +extern ssize_t xwrite(int fd, const void *buf, size_t len); +extern int xdup(int fd); +extern FILE *xfdopen(int fd, const char *mode); +extern int xmkstemp(char *template); + +static inline size_t xsize_t(off_t len) +{ + return (size_t)len; +} + +static inline int has_extension(const char *filename, const char *ext) +{ + size_t len = strlen(filename); + size_t extlen = strlen(ext); + return len > extlen && !memcmp(filename + len - extlen, ext, extlen); +} + +/* Sane ctype - no locale, and works with signed chars */ +#undef isascii +#undef isspace +#undef isdigit +#undef isalpha +#undef isalnum +#undef tolower +#undef toupper +extern unsigned char sane_ctype[256]; +#define GIT_SPACE 0x01 +#define GIT_DIGIT 0x02 +#define GIT_ALPHA 0x04 +#define GIT_GLOB_SPECIAL 0x08 +#define GIT_REGEX_SPECIAL 0x10 +#define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0) +#define isascii(x) (((x) & ~0x7f) == 0) +#define isspace(x) sane_istest(x,GIT_SPACE) +#define isdigit(x) sane_istest(x,GIT_DIGIT) +#define isalpha(x) sane_istest(x,GIT_ALPHA) +#define isalnum(x) sane_istest(x,GIT_ALPHA | GIT_DIGIT) +#define is_glob_special(x) sane_istest(x,GIT_GLOB_SPECIAL) +#define is_regex_special(x) sane_istest(x,GIT_GLOB_SPECIAL | GIT_REGEX_SPECIAL) +#define tolower(x) sane_case((unsigned char)(x), 0x20) +#define toupper(x) sane_case((unsigned char)(x), 0) + +static inline int sane_case(int x, int high) +{ + if (sane_istest(x, GIT_ALPHA)) + x = (x & ~0x20) | high; + return x; +} + +static inline int strtoul_ui(char const *s, int base, unsigned int *result) +{ + unsigned long ul; + char *p; + + errno = 0; + ul = strtoul(s, &p, base); + if (errno || *p || p == s || (unsigned int) ul != ul) + return -1; + *result = ul; + return 0; +} + +static inline int strtol_i(char const *s, int base, int *result) +{ + long ul; + char *p; + + errno = 0; + ul = strtol(s, &p, base); + if (errno || *p || p == s || (int) ul != ul) + return -1; + *result = ul; + return 0; +} + +#ifdef INTERNAL_QSORT +void git_qsort(void *base, size_t nmemb, size_t size, + int(*compar)(const void *, const void *)); +#define qsort git_qsort +#endif + +#ifndef DIR_HAS_BSD_GROUP_SEMANTICS +# define FORCE_DIR_SET_GID S_ISGID +#else +# define FORCE_DIR_SET_GID 0 +#endif + +#ifdef NO_NSEC +#undef USE_NSEC +#define ST_CTIME_NSEC(st) 0 +#define ST_MTIME_NSEC(st) 0 +#else +#ifdef USE_ST_TIMESPEC +#define ST_CTIME_NSEC(st) ((unsigned int)((st).st_ctimespec.tv_nsec)) +#define ST_MTIME_NSEC(st) ((unsigned int)((st).st_mtimespec.tv_nsec)) +#else +#define ST_CTIME_NSEC(st) ((unsigned int)((st).st_ctim.tv_nsec)) +#define ST_MTIME_NSEC(st) ((unsigned int)((st).st_mtim.tv_nsec)) +#endif +#endif + +#endif diff --git a/tools/perf/util/wrapper.c b/tools/perf/util/wrapper.c new file mode 100644 index 0000000..6350d65 --- /dev/null +++ b/tools/perf/util/wrapper.c @@ -0,0 +1,206 @@ +/* + * Various trivial helper wrappers around standard functions + */ +#include "cache.h" + +/* + * There's no pack memory to release - but stay close to the Git + * version so wrap this away: + */ +static inline void release_pack_memory(size_t size, int flag) +{ +} + +char *xstrdup(const char *str) +{ + char *ret = strdup(str); + if (!ret) { + release_pack_memory(strlen(str) + 1, -1); + ret = strdup(str); + if (!ret) + die("Out of memory, strdup failed"); + } + return ret; +} + +void *xmalloc(size_t size) +{ + void *ret = malloc(size); + if (!ret && !size) + ret = malloc(1); + if (!ret) { + release_pack_memory(size, -1); + ret = malloc(size); + if (!ret && !size) + ret = malloc(1); + if (!ret) + die("Out of memory, malloc failed"); + } +#ifdef XMALLOC_POISON + memset(ret, 0xA5, size); +#endif + return ret; +} + +/* + * xmemdupz() allocates (len + 1) bytes of memory, duplicates "len" bytes of + * "data" to the allocated memory, zero terminates the allocated memory, + * and returns a pointer to the allocated memory. If the allocation fails, + * the program dies. + */ +void *xmemdupz(const void *data, size_t len) +{ + char *p = xmalloc(len + 1); + memcpy(p, data, len); + p[len] = '\0'; + return p; +} + +char *xstrndup(const char *str, size_t len) +{ + char *p = memchr(str, '\0', len); + return xmemdupz(str, p ? p - str : len); +} + +void *xrealloc(void *ptr, size_t size) +{ + void *ret = realloc(ptr, size); + if (!ret && !size) + ret = realloc(ptr, 1); + if (!ret) { + release_pack_memory(size, -1); + ret = realloc(ptr, size); + if (!ret && !size) + ret = realloc(ptr, 1); + if (!ret) + die("Out of memory, realloc failed"); + } + return ret; +} + +void *xcalloc(size_t nmemb, size_t size) +{ + void *ret = calloc(nmemb, size); + if (!ret && (!nmemb || !size)) + ret = calloc(1, 1); + if (!ret) { + release_pack_memory(nmemb * size, -1); + ret = calloc(nmemb, size); + if (!ret && (!nmemb || !size)) + ret = calloc(1, 1); + if (!ret) + die("Out of memory, calloc failed"); + } + return ret; +} + +void *xmmap(void *start, size_t length, + int prot, int flags, int fd, off_t offset) +{ + void *ret = mmap(start, length, prot, flags, fd, offset); + if (ret == MAP_FAILED) { + if (!length) + return NULL; + release_pack_memory(length, fd); + ret = mmap(start, length, prot, flags, fd, offset); + if (ret == MAP_FAILED) + die("Out of memory? mmap failed: %s", strerror(errno)); + } + return ret; +} + +/* + * xread() is the same a read(), but it automatically restarts read() + * operations with a recoverable error (EAGAIN and EINTR). xread() + * DOES NOT GUARANTEE that "len" bytes is read even if the data is available. + */ +ssize_t xread(int fd, void *buf, size_t len) +{ + ssize_t nr; + while (1) { + nr = read(fd, buf, len); + if ((nr < 0) && (errno == EAGAIN || errno == EINTR)) + continue; + return nr; + } +} + +/* + * xwrite() is the same a write(), but it automatically restarts write() + * operations with a recoverable error (EAGAIN and EINTR). xwrite() DOES NOT + * GUARANTEE that "len" bytes is written even if the operation is successful. + */ +ssize_t xwrite(int fd, const void *buf, size_t len) +{ + ssize_t nr; + while (1) { + nr = write(fd, buf, len); + if ((nr < 0) && (errno == EAGAIN || errno == EINTR)) + continue; + return nr; + } +} + +ssize_t read_in_full(int fd, void *buf, size_t count) +{ + char *p = buf; + ssize_t total = 0; + + while (count > 0) { + ssize_t loaded = xread(fd, p, count); + if (loaded <= 0) + return total ? total : loaded; + count -= loaded; + p += loaded; + total += loaded; + } + + return total; +} + +ssize_t write_in_full(int fd, const void *buf, size_t count) +{ + const char *p = buf; + ssize_t total = 0; + + while (count > 0) { + ssize_t written = xwrite(fd, p, count); + if (written < 0) + return -1; + if (!written) { + errno = ENOSPC; + return -1; + } + count -= written; + p += written; + total += written; + } + + return total; +} + +int xdup(int fd) +{ + int ret = dup(fd); + if (ret < 0) + die("dup failed: %s", strerror(errno)); + return ret; +} + +FILE *xfdopen(int fd, const char *mode) +{ + FILE *stream = fdopen(fd, mode); + if (stream == NULL) + die("Out of memory? fdopen failed: %s", strerror(errno)); + return stream; +} + +int xmkstemp(char *template) +{ + int fd; + + fd = mkstemp(template); + if (fd < 0) + die("Unable to create temporary file: %s", strerror(errno)); + return fd; +} diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c index c3b99de..1eddae9 100644 --- a/virt/kvm/ioapic.c +++ b/virt/kvm/ioapic.c @@ -85,7 +85,7 @@ static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic, static int ioapic_service(struct kvm_ioapic *ioapic, unsigned int idx) { - union ioapic_redir_entry *pent; + union kvm_ioapic_redirect_entry *pent; int injected = -1; pent = &ioapic->redirtbl[idx]; @@ -142,149 +142,40 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val) } } -static int ioapic_inj_irq(struct kvm_ioapic *ioapic, - struct kvm_vcpu *vcpu, - u8 vector, u8 trig_mode, u8 delivery_mode) -{ - ioapic_debug("irq %d trig %d deliv %d\n", vector, trig_mode, - delivery_mode); - - ASSERT((delivery_mode == IOAPIC_FIXED) || - (delivery_mode == IOAPIC_LOWEST_PRIORITY)); - - return kvm_apic_set_irq(vcpu, vector, trig_mode); -} - -static void ioapic_inj_nmi(struct kvm_vcpu *vcpu) -{ - kvm_inject_nmi(vcpu); - kvm_vcpu_kick(vcpu); -} - -u32 kvm_ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest, - u8 dest_mode) -{ - u32 mask = 0; - int i; - struct kvm *kvm = ioapic->kvm; - struct kvm_vcpu *vcpu; - - ioapic_debug("dest %d dest_mode %d\n", dest, dest_mode); - - if (dest_mode == 0) { /* Physical mode. */ - if (dest == 0xFF) { /* Broadcast. */ - for (i = 0; i < KVM_MAX_VCPUS; ++i) - if (kvm->vcpus[i] && kvm->vcpus[i]->arch.apic) - mask |= 1 << i; - return mask; - } - for (i = 0; i < KVM_MAX_VCPUS; ++i) { - vcpu = kvm->vcpus[i]; - if (!vcpu) - continue; - if (kvm_apic_match_physical_addr(vcpu->arch.apic, dest)) { - if (vcpu->arch.apic) - mask = 1 << i; - break; - } - } - } else if (dest != 0) /* Logical mode, MDA non-zero. */ - for (i = 0; i < KVM_MAX_VCPUS; ++i) { - vcpu = kvm->vcpus[i]; - if (!vcpu) - continue; - if (vcpu->arch.apic && - kvm_apic_match_logical_addr(vcpu->arch.apic, dest)) - mask |= 1 << vcpu->vcpu_id; - } - ioapic_debug("mask %x\n", mask); - return mask; -} - static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq) { - u8 dest = ioapic->redirtbl[irq].fields.dest_id; - u8 dest_mode = ioapic->redirtbl[irq].fields.dest_mode; - u8 delivery_mode = ioapic->redirtbl[irq].fields.delivery_mode; - u8 vector = ioapic->redirtbl[irq].fields.vector; - u8 trig_mode = ioapic->redirtbl[irq].fields.trig_mode; - u32 deliver_bitmask; - struct kvm_vcpu *vcpu; - int vcpu_id, r = -1; + union kvm_ioapic_redirect_entry *entry = &ioapic->redirtbl[irq]; + struct kvm_lapic_irq irqe; ioapic_debug("dest=%x dest_mode=%x delivery_mode=%x " "vector=%x trig_mode=%x\n", - dest, dest_mode, delivery_mode, vector, trig_mode); - - deliver_bitmask = kvm_ioapic_get_delivery_bitmask(ioapic, dest, - dest_mode); - if (!deliver_bitmask) { - ioapic_debug("no target on destination\n"); - return 0; - } + entry->fields.dest, entry->fields.dest_mode, + entry->fields.delivery_mode, entry->fields.vector, + entry->fields.trig_mode); + + irqe.dest_id = entry->fields.dest_id; + irqe.vector = entry->fields.vector; + irqe.dest_mode = entry->fields.dest_mode; + irqe.trig_mode = entry->fields.trig_mode; + irqe.delivery_mode = entry->fields.delivery_mode << 8; + irqe.level = 1; + irqe.shorthand = 0; - switch (delivery_mode) { - case IOAPIC_LOWEST_PRIORITY: - vcpu = kvm_get_lowest_prio_vcpu(ioapic->kvm, vector, - deliver_bitmask); #ifdef CONFIG_X86 - if (irq == 0) - vcpu = ioapic->kvm->vcpus[0]; -#endif - if (vcpu != NULL) - r = ioapic_inj_irq(ioapic, vcpu, vector, - trig_mode, delivery_mode); - else - ioapic_debug("null lowest prio vcpu: " - "mask=%x vector=%x delivery_mode=%x\n", - deliver_bitmask, vector, IOAPIC_LOWEST_PRIORITY); - break; - case IOAPIC_FIXED: -#ifdef CONFIG_X86 - if (irq == 0) - deliver_bitmask = 1; -#endif - for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) { - if (!(deliver_bitmask & (1 << vcpu_id))) - continue; - deliver_bitmask &= ~(1 << vcpu_id); - vcpu = ioapic->kvm->vcpus[vcpu_id]; - if (vcpu) { - if (r < 0) - r = 0; - r += ioapic_inj_irq(ioapic, vcpu, vector, - trig_mode, delivery_mode); - } - } - break; - case IOAPIC_NMI: - for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) { - if (!(deliver_bitmask & (1 << vcpu_id))) - continue; - deliver_bitmask &= ~(1 << vcpu_id); - vcpu = ioapic->kvm->vcpus[vcpu_id]; - if (vcpu) { - ioapic_inj_nmi(vcpu); - r = 1; - } - else - ioapic_debug("NMI to vcpu %d failed\n", - vcpu->vcpu_id); - } - break; - default: - printk(KERN_WARNING "Unsupported delivery mode %d\n", - delivery_mode); - break; + /* Always delivery PIT interrupt to vcpu 0 */ + if (irq == 0) { + irqe.dest_mode = 0; /* Physical mode. */ + irqe.dest_id = ioapic->kvm->vcpus[0]->vcpu_id; } - return r; +#endif + return kvm_irq_delivery_to_apic(ioapic->kvm, NULL, &irqe); } int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level) { u32 old_irr = ioapic->irr; u32 mask = 1 << irq; - union ioapic_redir_entry entry; + union kvm_ioapic_redirect_entry entry; int ret = 1; if (irq >= 0 && irq < IOAPIC_NUM_PINS) { @@ -305,7 +196,7 @@ int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level) static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int pin, int trigger_mode) { - union ioapic_redir_entry *ent; + union kvm_ioapic_redirect_entry *ent; ent = &ioapic->redirtbl[pin]; diff --git a/virt/kvm/ioapic.h b/virt/kvm/ioapic.h index a34bd5e..7080b71 100644 --- a/virt/kvm/ioapic.h +++ b/virt/kvm/ioapic.h @@ -40,22 +40,7 @@ struct kvm_ioapic { u32 id; u32 irr; u32 pad; - union ioapic_redir_entry { - u64 bits; - struct { - u8 vector; - u8 delivery_mode:3; - u8 dest_mode:1; - u8 delivery_status:1; - u8 polarity:1; - u8 remote_irr:1; - u8 trig_mode:1; - u8 mask:1; - u8 reserve:7; - u8 reserved[4]; - u8 dest_id; - } fields; - } redirtbl[IOAPIC_NUM_PINS]; + union kvm_ioapic_redirect_entry redirtbl[IOAPIC_NUM_PINS]; struct kvm_io_device dev; struct kvm *kvm; void (*ack_notifier)(void *opaque, int irq); @@ -79,13 +64,13 @@ static inline struct kvm_ioapic *ioapic_irqchip(struct kvm *kvm) return kvm->arch.vioapic; } -struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector, - unsigned long bitmap); +int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source, + int short_hand, int dest, int dest_mode); +int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2); void kvm_ioapic_update_eoi(struct kvm *kvm, int vector, int trigger_mode); int kvm_ioapic_init(struct kvm *kvm); int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level); void kvm_ioapic_reset(struct kvm_ioapic *ioapic); -u32 kvm_ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest, - u8 dest_mode); - +int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src, + struct kvm_lapic_irq *irq); #endif diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c index 4c40375..1514758 100644 --- a/virt/kvm/iommu.c +++ b/virt/kvm/iommu.c @@ -39,11 +39,16 @@ int kvm_iommu_map_pages(struct kvm *kvm, pfn_t pfn; int i, r = 0; struct iommu_domain *domain = kvm->arch.iommu_domain; + int flags; /* check if iommu exists and in use */ if (!domain) return 0; + flags = IOMMU_READ | IOMMU_WRITE; + if (kvm->arch.iommu_flags & KVM_IOMMU_CACHE_COHERENCY) + flags |= IOMMU_CACHE; + for (i = 0; i < npages; i++) { /* check if already mapped */ if (iommu_iova_to_phys(domain, gfn_to_gpa(gfn))) @@ -53,8 +58,7 @@ int kvm_iommu_map_pages(struct kvm *kvm, r = iommu_map_range(domain, gfn_to_gpa(gfn), pfn_to_hpa(pfn), - PAGE_SIZE, - IOMMU_READ | IOMMU_WRITE); + PAGE_SIZE, flags); if (r) { printk(KERN_ERR "kvm_iommu_map_address:" "iommu failed to map pfn=%lx\n", pfn); @@ -88,7 +92,7 @@ int kvm_assign_device(struct kvm *kvm, { struct pci_dev *pdev = NULL; struct iommu_domain *domain = kvm->arch.iommu_domain; - int r; + int r, last_flags; /* check if iommu exists and in use */ if (!domain) @@ -107,12 +111,29 @@ int kvm_assign_device(struct kvm *kvm, return r; } + last_flags = kvm->arch.iommu_flags; + if (iommu_domain_has_cap(kvm->arch.iommu_domain, + IOMMU_CAP_CACHE_COHERENCY)) + kvm->arch.iommu_flags |= KVM_IOMMU_CACHE_COHERENCY; + + /* Check if need to update IOMMU page table for guest memory */ + if ((last_flags ^ kvm->arch.iommu_flags) == + KVM_IOMMU_CACHE_COHERENCY) { + kvm_iommu_unmap_memslots(kvm); + r = kvm_iommu_map_memslots(kvm); + if (r) + goto out_unmap; + } + printk(KERN_DEBUG "assign device: host bdf = %x:%x:%x\n", assigned_dev->host_busnr, PCI_SLOT(assigned_dev->host_devfn), PCI_FUNC(assigned_dev->host_devfn)); return 0; +out_unmap: + kvm_iommu_unmap_memslots(kvm); + return r; } int kvm_deassign_device(struct kvm *kvm, diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c index 864ac54..a8bd466 100644 --- a/virt/kvm/irq_comm.c +++ b/virt/kvm/irq_comm.c @@ -22,6 +22,9 @@ #include #include +#ifdef CONFIG_IA64 +#include +#endif #include "irq.h" @@ -43,57 +46,73 @@ static int kvm_set_ioapic_irq(struct kvm_kernel_irq_routing_entry *e, return kvm_ioapic_set_irq(kvm->arch.vioapic, e->irqchip.pin, level); } -static int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, - struct kvm *kvm, int level) +inline static bool kvm_is_dm_lowest_prio(struct kvm_lapic_irq *irq) { - int vcpu_id, r = -1; - struct kvm_vcpu *vcpu; - struct kvm_ioapic *ioapic = ioapic_irqchip(kvm); - int dest_id = (e->msi.address_lo & MSI_ADDR_DEST_ID_MASK) - >> MSI_ADDR_DEST_ID_SHIFT; - int vector = (e->msi.data & MSI_DATA_VECTOR_MASK) - >> MSI_DATA_VECTOR_SHIFT; - int dest_mode = test_bit(MSI_ADDR_DEST_MODE_SHIFT, - (unsigned long *)&e->msi.address_lo); - int trig_mode = test_bit(MSI_DATA_TRIGGER_SHIFT, - (unsigned long *)&e->msi.data); - int delivery_mode = test_bit(MSI_DATA_DELIVERY_MODE_SHIFT, - (unsigned long *)&e->msi.data); - u32 deliver_bitmask; - - BUG_ON(!ioapic); - - deliver_bitmask = kvm_ioapic_get_delivery_bitmask(ioapic, - dest_id, dest_mode); - /* IOAPIC delivery mode value is the same as MSI here */ - switch (delivery_mode) { - case IOAPIC_LOWEST_PRIORITY: - vcpu = kvm_get_lowest_prio_vcpu(ioapic->kvm, vector, - deliver_bitmask); - if (vcpu != NULL) - r = kvm_apic_set_irq(vcpu, vector, trig_mode); - else - printk(KERN_INFO "kvm: null lowest priority vcpu!\n"); - break; - case IOAPIC_FIXED: - for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) { - if (!(deliver_bitmask & (1 << vcpu_id))) - continue; - deliver_bitmask &= ~(1 << vcpu_id); - vcpu = ioapic->kvm->vcpus[vcpu_id]; - if (vcpu) { - if (r < 0) - r = 0; - r += kvm_apic_set_irq(vcpu, vector, trig_mode); - } +#ifdef CONFIG_IA64 + return irq->delivery_mode == + (IOSAPIC_LOWEST_PRIORITY << IOSAPIC_DELIVERY_SHIFT); +#else + return irq->delivery_mode == APIC_DM_LOWEST; +#endif +} + +int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src, + struct kvm_lapic_irq *irq) +{ + int i, r = -1; + struct kvm_vcpu *vcpu, *lowest = NULL; + + if (irq->dest_mode == 0 && irq->dest_id == 0xff && + kvm_is_dm_lowest_prio(irq)) + printk(KERN_INFO "kvm: apic: phys broadcast and lowest prio\n"); + + for (i = 0; i < KVM_MAX_VCPUS; i++) { + vcpu = kvm->vcpus[i]; + + if (!vcpu || !kvm_apic_present(vcpu)) + continue; + + if (!kvm_apic_match_dest(vcpu, src, irq->shorthand, + irq->dest_id, irq->dest_mode)) + continue; + + if (!kvm_is_dm_lowest_prio(irq)) { + if (r < 0) + r = 0; + r += kvm_apic_set_irq(vcpu, irq); + } else { + if (!lowest) + lowest = vcpu; + else if (kvm_apic_compare_prio(vcpu, lowest) < 0) + lowest = vcpu; } - break; - default: - break; } + + if (lowest) + r = kvm_apic_set_irq(lowest, irq); + return r; } +static int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, + struct kvm *kvm, int level) +{ + struct kvm_lapic_irq irq; + + irq.dest_id = (e->msi.address_lo & + MSI_ADDR_DEST_ID_MASK) >> MSI_ADDR_DEST_ID_SHIFT; + irq.vector = (e->msi.data & + MSI_DATA_VECTOR_MASK) >> MSI_DATA_VECTOR_SHIFT; + irq.dest_mode = (1 << MSI_ADDR_DEST_MODE_SHIFT) & e->msi.address_lo; + irq.trig_mode = (1 << MSI_DATA_TRIGGER_SHIFT) & e->msi.data; + irq.delivery_mode = e->msi.data & 0x700; + irq.level = 1; + irq.shorthand = 0; + + /* TODO Deal with RH bit of MSI message address */ + return kvm_irq_delivery_to_apic(kvm, NULL, &irq); +} + /* This should be called with the kvm->lock mutex held * Return value: * < 0 Interrupt was ignored (masked or not delivered for other reasons) @@ -252,7 +271,7 @@ static int setup_routing_entry(struct kvm_kernel_irq_routing_entry *e, delta = 8; break; case KVM_IRQCHIP_IOAPIC: - e->set = kvm_set_ioapic_irq; + e->set = kvm_set_ioapic_irq; break; default: goto out; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 4d0dd39..7645543 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -41,6 +41,8 @@ #include #include #include +#include +#include #include #include @@ -60,9 +62,6 @@ MODULE_AUTHOR("Qumranet"); MODULE_LICENSE("GPL"); -static int msi2intx = 1; -module_param(msi2intx, bool, 0); - DEFINE_SPINLOCK(kvm_lock); LIST_HEAD(vm_list); @@ -95,38 +94,96 @@ static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *h return NULL; } +static int find_index_from_host_irq(struct kvm_assigned_dev_kernel + *assigned_dev, int irq) +{ + int i, index; + struct msix_entry *host_msix_entries; + + host_msix_entries = assigned_dev->host_msix_entries; + + index = -1; + for (i = 0; i < assigned_dev->entries_nr; i++) + if (irq == host_msix_entries[i].vector) { + index = i; + break; + } + if (index < 0) { + printk(KERN_WARNING "Fail to find correlated MSI-X entry!\n"); + return 0; + } + + return index; +} + static void kvm_assigned_dev_interrupt_work_handler(struct work_struct *work) { struct kvm_assigned_dev_kernel *assigned_dev; + struct kvm *kvm; + int irq, i; assigned_dev = container_of(work, struct kvm_assigned_dev_kernel, interrupt_work); + kvm = assigned_dev->kvm; /* This is taken to safely inject irq inside the guest. When * the interrupt injection (or the ioapic code) uses a * finer-grained lock, update this */ - mutex_lock(&assigned_dev->kvm->lock); - kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, - assigned_dev->guest_irq, 1); - - if (assigned_dev->irq_requested_type & KVM_ASSIGNED_DEV_GUEST_MSI) { - enable_irq(assigned_dev->host_irq); - assigned_dev->host_irq_disabled = false; + mutex_lock(&kvm->lock); + spin_lock_irq(&assigned_dev->assigned_dev_lock); + if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) { + struct kvm_guest_msix_entry *guest_entries = + assigned_dev->guest_msix_entries; + for (i = 0; i < assigned_dev->entries_nr; i++) { + if (!(guest_entries[i].flags & + KVM_ASSIGNED_MSIX_PENDING)) + continue; + guest_entries[i].flags &= ~KVM_ASSIGNED_MSIX_PENDING; + kvm_set_irq(assigned_dev->kvm, + assigned_dev->irq_source_id, + guest_entries[i].vector, 1); + irq = assigned_dev->host_msix_entries[i].vector; + if (irq != 0) + enable_irq(irq); + assigned_dev->host_irq_disabled = false; + } + } else { + kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, + assigned_dev->guest_irq, 1); + if (assigned_dev->irq_requested_type & + KVM_DEV_IRQ_GUEST_MSI) { + enable_irq(assigned_dev->host_irq); + assigned_dev->host_irq_disabled = false; + } } + + spin_unlock_irq(&assigned_dev->assigned_dev_lock); mutex_unlock(&assigned_dev->kvm->lock); } static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id) { + unsigned long flags; struct kvm_assigned_dev_kernel *assigned_dev = (struct kvm_assigned_dev_kernel *) dev_id; + spin_lock_irqsave(&assigned_dev->assigned_dev_lock, flags); + if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) { + int index = find_index_from_host_irq(assigned_dev, irq); + if (index < 0) + goto out; + assigned_dev->guest_msix_entries[index].flags |= + KVM_ASSIGNED_MSIX_PENDING; + } + schedule_work(&assigned_dev->interrupt_work); disable_irq_nosync(irq); assigned_dev->host_irq_disabled = true; +out: + spin_unlock_irqrestore(&assigned_dev->assigned_dev_lock, flags); return IRQ_HANDLED; } @@ -134,6 +191,7 @@ static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id) static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian) { struct kvm_assigned_dev_kernel *dev; + unsigned long flags; if (kian->gsi == -1) return; @@ -146,28 +204,30 @@ static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian) /* The guest irq may be shared so this ack may be * from another device. */ + spin_lock_irqsave(&dev->assigned_dev_lock, flags); if (dev->host_irq_disabled) { enable_irq(dev->host_irq); dev->host_irq_disabled = false; } + spin_unlock_irqrestore(&dev->assigned_dev_lock, flags); } -/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */ -static void kvm_free_assigned_irq(struct kvm *kvm, - struct kvm_assigned_dev_kernel *assigned_dev) +static void deassign_guest_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *assigned_dev) { - if (!irqchip_in_kernel(kvm)) - return; - kvm_unregister_irq_ack_notifier(&assigned_dev->ack_notifier); + assigned_dev->ack_notifier.gsi = -1; if (assigned_dev->irq_source_id != -1) kvm_free_irq_source_id(kvm, assigned_dev->irq_source_id); assigned_dev->irq_source_id = -1; + assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_GUEST_MASK); +} - if (!assigned_dev->irq_requested_type) - return; - +/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */ +static void deassign_host_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *assigned_dev) +{ /* * In kvm_free_device_irq, cancel_work_sync return true if: * 1. work is scheduled, and then cancelled. @@ -184,17 +244,64 @@ static void kvm_free_assigned_irq(struct kvm *kvm, * now, the kvm state is still legal for probably we also have to wait * interrupt_work done. */ - disable_irq_nosync(assigned_dev->host_irq); - cancel_work_sync(&assigned_dev->interrupt_work); + if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) { + int i; + for (i = 0; i < assigned_dev->entries_nr; i++) + disable_irq_nosync(assigned_dev-> + host_msix_entries[i].vector); + + cancel_work_sync(&assigned_dev->interrupt_work); + + for (i = 0; i < assigned_dev->entries_nr; i++) + free_irq(assigned_dev->host_msix_entries[i].vector, + (void *)assigned_dev); + + assigned_dev->entries_nr = 0; + kfree(assigned_dev->host_msix_entries); + kfree(assigned_dev->guest_msix_entries); + pci_disable_msix(assigned_dev->dev); + } else { + /* Deal with MSI and INTx */ + disable_irq_nosync(assigned_dev->host_irq); + cancel_work_sync(&assigned_dev->interrupt_work); - free_irq(assigned_dev->host_irq, (void *)assigned_dev); + free_irq(assigned_dev->host_irq, (void *)assigned_dev); - if (assigned_dev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) - pci_disable_msi(assigned_dev->dev); + if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSI) + pci_disable_msi(assigned_dev->dev); + } - assigned_dev->irq_requested_type = 0; + assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_HOST_MASK); } +static int kvm_deassign_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *assigned_dev, + unsigned long irq_requested_type) +{ + unsigned long guest_irq_type, host_irq_type; + + if (!irqchip_in_kernel(kvm)) + return -EINVAL; + /* no irq assignment to deassign */ + if (!assigned_dev->irq_requested_type) + return -ENXIO; + + host_irq_type = irq_requested_type & KVM_DEV_IRQ_HOST_MASK; + guest_irq_type = irq_requested_type & KVM_DEV_IRQ_GUEST_MASK; + + if (host_irq_type) + deassign_host_irq(kvm, assigned_dev); + if (guest_irq_type) + deassign_guest_irq(kvm, assigned_dev); + + return 0; +} + +static void kvm_free_assigned_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *assigned_dev) +{ + kvm_deassign_irq(kvm, assigned_dev, assigned_dev->irq_requested_type); +} static void kvm_free_assigned_device(struct kvm *kvm, struct kvm_assigned_dev_kernel @@ -226,190 +333,244 @@ void kvm_free_all_assigned_devices(struct kvm *kvm) } } -static int assigned_device_update_intx(struct kvm *kvm, - struct kvm_assigned_dev_kernel *adev, - struct kvm_assigned_irq *airq) +static int assigned_device_enable_host_intx(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev) { - adev->guest_irq = airq->guest_irq; - adev->ack_notifier.gsi = airq->guest_irq; + dev->host_irq = dev->dev->irq; + /* Even though this is PCI, we don't want to use shared + * interrupts. Sharing host devices with guest-assigned devices + * on the same interrupt line is not a happy situation: there + * are going to be long delays in accepting, acking, etc. + */ + if (request_irq(dev->host_irq, kvm_assigned_dev_intr, + 0, "kvm_assigned_intx_device", (void *)dev)) + return -EIO; + return 0; +} - if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_INTX) - return 0; +#ifdef __KVM_HAVE_MSI +static int assigned_device_enable_host_msi(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev) +{ + int r; - if (irqchip_in_kernel(kvm)) { - if (!msi2intx && - (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)) { - free_irq(adev->host_irq, (void *)adev); - pci_disable_msi(adev->dev); - } + if (!dev->dev->msi_enabled) { + r = pci_enable_msi(dev->dev); + if (r) + return r; + } - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; + dev->host_irq = dev->dev->irq; + if (request_irq(dev->host_irq, kvm_assigned_dev_intr, 0, + "kvm_assigned_msi_device", (void *)dev)) { + pci_disable_msi(dev->dev); + return -EIO; + } - if (airq->host_irq) - adev->host_irq = airq->host_irq; - else - adev->host_irq = adev->dev->irq; + return 0; +} +#endif - /* Even though this is PCI, we don't want to use shared - * interrupts. Sharing host devices with guest-assigned devices - * on the same interrupt line is not a happy situation: there - * are going to be long delays in accepting, acking, etc. - */ - if (request_irq(adev->host_irq, kvm_assigned_dev_intr, - 0, "kvm_assigned_intx_device", (void *)adev)) - return -EIO; +#ifdef __KVM_HAVE_MSIX +static int assigned_device_enable_host_msix(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev) +{ + int i, r = -EINVAL; + + /* host_msix_entries and guest_msix_entries should have been + * initialized */ + if (dev->entries_nr == 0) + return r; + + r = pci_enable_msix(dev->dev, dev->host_msix_entries, dev->entries_nr); + if (r) + return r; + + for (i = 0; i < dev->entries_nr; i++) { + r = request_irq(dev->host_msix_entries[i].vector, + kvm_assigned_dev_intr, 0, + "kvm_assigned_msix_device", + (void *)dev); + /* FIXME: free requested_irq's on failure */ + if (r) + return r; } - adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_INTX | - KVM_ASSIGNED_DEV_HOST_INTX; return 0; } -#ifdef CONFIG_X86 -static int assigned_device_update_msi(struct kvm *kvm, - struct kvm_assigned_dev_kernel *adev, - struct kvm_assigned_irq *airq) +#endif + +static int assigned_device_enable_guest_intx(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + struct kvm_assigned_irq *irq) { - int r; + dev->guest_irq = irq->guest_irq; + dev->ack_notifier.gsi = irq->guest_irq; + return 0; +} - adev->guest_irq = airq->guest_irq; - if (airq->flags & KVM_DEV_IRQ_ASSIGN_ENABLE_MSI) { - /* x86 don't care upper address of guest msi message addr */ - adev->irq_requested_type |= KVM_ASSIGNED_DEV_GUEST_MSI; - adev->irq_requested_type &= ~KVM_ASSIGNED_DEV_GUEST_INTX; - adev->ack_notifier.gsi = -1; - } else if (msi2intx) { - adev->irq_requested_type |= KVM_ASSIGNED_DEV_GUEST_INTX; - adev->irq_requested_type &= ~KVM_ASSIGNED_DEV_GUEST_MSI; - adev->ack_notifier.gsi = airq->guest_irq; - } else { - /* - * Guest require to disable device MSI, we disable MSI and - * re-enable INTx by default again. Notice it's only for - * non-msi2intx. - */ - assigned_device_update_intx(kvm, adev, airq); - return 0; +#ifdef __KVM_HAVE_MSI +static int assigned_device_enable_guest_msi(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + struct kvm_assigned_irq *irq) +{ + dev->guest_irq = irq->guest_irq; + dev->ack_notifier.gsi = -1; + return 0; +} +#endif +#ifdef __KVM_HAVE_MSIX +static int assigned_device_enable_guest_msix(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + struct kvm_assigned_irq *irq) +{ + dev->guest_irq = irq->guest_irq; + dev->ack_notifier.gsi = -1; + return 0; +} +#endif + +static int assign_host_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + __u32 host_irq_type) +{ + int r = -EEXIST; + + if (dev->irq_requested_type & KVM_DEV_IRQ_HOST_MASK) + return r; + + switch (host_irq_type) { + case KVM_DEV_IRQ_HOST_INTX: + r = assigned_device_enable_host_intx(kvm, dev); + break; +#ifdef __KVM_HAVE_MSI + case KVM_DEV_IRQ_HOST_MSI: + r = assigned_device_enable_host_msi(kvm, dev); + break; +#endif +#ifdef __KVM_HAVE_MSIX + case KVM_DEV_IRQ_HOST_MSIX: + r = assigned_device_enable_host_msix(kvm, dev); + break; +#endif + default: + r = -EINVAL; } - if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) - return 0; + if (!r) + dev->irq_requested_type |= host_irq_type; - if (irqchip_in_kernel(kvm)) { - if (!msi2intx) { - if (adev->irq_requested_type & - KVM_ASSIGNED_DEV_HOST_INTX) - free_irq(adev->host_irq, (void *)adev); + return r; +} - r = pci_enable_msi(adev->dev); - if (r) - return r; - } +static int assign_guest_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + struct kvm_assigned_irq *irq, + unsigned long guest_irq_type) +{ + int id; + int r = -EEXIST; + + if (dev->irq_requested_type & KVM_DEV_IRQ_GUEST_MASK) + return r; - adev->host_irq = adev->dev->irq; - if (request_irq(adev->host_irq, kvm_assigned_dev_intr, 0, - "kvm_assigned_msi_device", (void *)adev)) - return -EIO; + id = kvm_request_irq_source_id(kvm); + if (id < 0) + return id; + + dev->irq_source_id = id; + + switch (guest_irq_type) { + case KVM_DEV_IRQ_GUEST_INTX: + r = assigned_device_enable_guest_intx(kvm, dev, irq); + break; +#ifdef __KVM_HAVE_MSI + case KVM_DEV_IRQ_GUEST_MSI: + r = assigned_device_enable_guest_msi(kvm, dev, irq); + break; +#endif +#ifdef __KVM_HAVE_MSIX + case KVM_DEV_IRQ_GUEST_MSIX: + r = assigned_device_enable_guest_msix(kvm, dev, irq); + break; +#endif + default: + r = -EINVAL; } - if (!msi2intx) - adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_MSI; + if (!r) { + dev->irq_requested_type |= guest_irq_type; + kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier); + } else + kvm_free_irq_source_id(kvm, dev->irq_source_id); - adev->irq_requested_type |= KVM_ASSIGNED_DEV_HOST_MSI; - return 0; + return r; } -#endif +/* TODO Deal with KVM_DEV_IRQ_ASSIGNED_MASK_MSIX */ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm, - struct kvm_assigned_irq - *assigned_irq) + struct kvm_assigned_irq *assigned_irq) { - int r = 0; + int r = -EINVAL; struct kvm_assigned_dev_kernel *match; - u32 current_flags = 0, changed_flags; + unsigned long host_irq_type, guest_irq_type; - mutex_lock(&kvm->lock); + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + if (!irqchip_in_kernel(kvm)) + return r; + + mutex_lock(&kvm->lock); + r = -ENODEV; match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, assigned_irq->assigned_dev_id); - if (!match) { - mutex_unlock(&kvm->lock); - return -EINVAL; - } - - if (!match->irq_requested_type) { - INIT_WORK(&match->interrupt_work, - kvm_assigned_dev_interrupt_work_handler); - if (irqchip_in_kernel(kvm)) { - /* Register ack nofitier */ - match->ack_notifier.gsi = -1; - match->ack_notifier.irq_acked = - kvm_assigned_dev_ack_irq; - kvm_register_irq_ack_notifier(kvm, - &match->ack_notifier); - - /* Request IRQ source ID */ - r = kvm_request_irq_source_id(kvm); - if (r < 0) - goto out_release; - else - match->irq_source_id = r; - -#ifdef CONFIG_X86 - /* Determine host device irq type, we can know the - * result from dev->msi_enabled */ - if (msi2intx) - pci_enable_msi(match->dev); -#endif - } - } + if (!match) + goto out; - if ((match->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) && - (match->irq_requested_type & KVM_ASSIGNED_DEV_GUEST_MSI)) - current_flags |= KVM_DEV_IRQ_ASSIGN_ENABLE_MSI; + host_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_HOST_MASK); + guest_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_GUEST_MASK); - changed_flags = assigned_irq->flags ^ current_flags; + r = -EINVAL; + /* can only assign one type at a time */ + if (hweight_long(host_irq_type) > 1) + goto out; + if (hweight_long(guest_irq_type) > 1) + goto out; + if (host_irq_type == 0 && guest_irq_type == 0) + goto out; - if ((changed_flags & KVM_DEV_IRQ_ASSIGN_MSI_ACTION) || - (msi2intx && match->dev->msi_enabled)) { -#ifdef CONFIG_X86 - r = assigned_device_update_msi(kvm, match, assigned_irq); - if (r) { - printk(KERN_WARNING "kvm: failed to enable " - "MSI device!\n"); - goto out_release; - } -#else - r = -ENOTTY; -#endif - } else if (assigned_irq->host_irq == 0 && match->dev->irq == 0) { - /* Host device IRQ 0 means don't support INTx */ - if (!msi2intx) { - printk(KERN_WARNING - "kvm: wait device to enable MSI!\n"); - r = 0; - } else { - printk(KERN_WARNING - "kvm: failed to enable MSI device!\n"); - r = -ENOTTY; - goto out_release; - } - } else { - /* Non-sharing INTx mode */ - r = assigned_device_update_intx(kvm, match, assigned_irq); - if (r) { - printk(KERN_WARNING "kvm: failed to enable " - "INTx device!\n"); - goto out_release; - } - } + r = 0; + if (host_irq_type) + r = assign_host_irq(kvm, match, host_irq_type); + if (r) + goto out; + if (guest_irq_type) + r = assign_guest_irq(kvm, match, assigned_irq, guest_irq_type); +out: mutex_unlock(&kvm->lock); return r; -out_release: +} + +static int kvm_vm_ioctl_deassign_dev_irq(struct kvm *kvm, + struct kvm_assigned_irq + *assigned_irq) +{ + int r = -ENODEV; + struct kvm_assigned_dev_kernel *match; + + mutex_lock(&kvm->lock); + + match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, + assigned_irq->assigned_dev_id); + if (!match) + goto out; + + r = kvm_deassign_irq(kvm, match, assigned_irq->flags); +out: mutex_unlock(&kvm->lock); - kvm_free_assigned_device(kvm, match); return r; } @@ -427,7 +588,7 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, assigned_dev->assigned_dev_id); if (match) { /* device already assigned */ - r = -EINVAL; + r = -EEXIST; goto out; } @@ -464,8 +625,12 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, match->host_devfn = assigned_dev->devfn; match->flags = assigned_dev->flags; match->dev = dev; + spin_lock_init(&match->assigned_dev_lock); match->irq_source_id = -1; match->kvm = kvm; + match->ack_notifier.irq_acked = kvm_assigned_dev_ack_irq; + INIT_WORK(&match->interrupt_work, + kvm_assigned_dev_interrupt_work_handler); list_add(&match->list, &kvm->arch.assigned_dev_head); @@ -878,6 +1043,8 @@ static void kvm_destroy_vm(struct kvm *kvm) #endif #if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) mmu_notifier_unregister(&kvm->mmu_notifier, kvm->mm); +#else + kvm_arch_flush_shadow(kvm); #endif kvm_arch_destroy_vm(kvm); mmdrop(mm); @@ -919,9 +1086,8 @@ int __kvm_set_memory_region(struct kvm *kvm, { int r; gfn_t base_gfn; - unsigned long npages; - int largepages; - unsigned long i; + unsigned long npages, ugfn; + unsigned long largepages, i; struct kvm_memory_slot *memslot; struct kvm_memory_slot old, new; @@ -1010,6 +1176,14 @@ int __kvm_set_memory_region(struct kvm *kvm, new.lpage_info[0].write_count = 1; if ((base_gfn+npages) % KVM_PAGES_PER_HPAGE) new.lpage_info[largepages-1].write_count = 1; + ugfn = new.userspace_addr >> PAGE_SHIFT; + /* + * If the gfn and userspace address are not aligned wrt each + * other, disable large page support for this slot + */ + if ((base_gfn ^ ugfn) & (KVM_PAGES_PER_HPAGE - 1)) + for (i = 0; i < largepages; ++i) + new.lpage_info[i].write_count = 1; } /* Allocate page dirty bitmap if needed */ @@ -1043,8 +1217,10 @@ int __kvm_set_memory_region(struct kvm *kvm, kvm_free_physmem_slot(&old, npages ? &new : NULL); /* Slot deletion case: we have to update the current slot */ + spin_lock(&kvm->mmu_lock); if (!npages) *memslot = old; + spin_unlock(&kvm->mmu_lock); #ifdef CONFIG_DMAR /* map the pages in iommu page table */ r = kvm_iommu_map_pages(kvm, base_gfn, npages); @@ -1454,12 +1630,14 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu) for (;;) { prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE); - if (kvm_cpu_has_interrupt(vcpu) || - kvm_cpu_has_pending_timer(vcpu) || - kvm_arch_vcpu_runnable(vcpu)) { + if ((kvm_arch_interrupt_allowed(vcpu) && + kvm_cpu_has_interrupt(vcpu)) || + kvm_arch_vcpu_runnable(vcpu)) { set_bit(KVM_REQ_UNHALT, &vcpu->requests); break; } + if (kvm_cpu_has_pending_timer(vcpu)) + break; if (signal_pending(current)) break; @@ -1593,6 +1771,88 @@ static int kvm_vcpu_ioctl_set_sigmask(struct kvm_vcpu *vcpu, sigset_t *sigset) return 0; } +#ifdef __KVM_HAVE_MSIX +static int kvm_vm_ioctl_set_msix_nr(struct kvm *kvm, + struct kvm_assigned_msix_nr *entry_nr) +{ + int r = 0; + struct kvm_assigned_dev_kernel *adev; + + mutex_lock(&kvm->lock); + + adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, + entry_nr->assigned_dev_id); + if (!adev) { + r = -EINVAL; + goto msix_nr_out; + } + + if (adev->entries_nr == 0) { + adev->entries_nr = entry_nr->entry_nr; + if (adev->entries_nr == 0 || + adev->entries_nr >= KVM_MAX_MSIX_PER_DEV) { + r = -EINVAL; + goto msix_nr_out; + } + + adev->host_msix_entries = kzalloc(sizeof(struct msix_entry) * + entry_nr->entry_nr, + GFP_KERNEL); + if (!adev->host_msix_entries) { + r = -ENOMEM; + goto msix_nr_out; + } + adev->guest_msix_entries = kzalloc( + sizeof(struct kvm_guest_msix_entry) * + entry_nr->entry_nr, GFP_KERNEL); + if (!adev->guest_msix_entries) { + kfree(adev->host_msix_entries); + r = -ENOMEM; + goto msix_nr_out; + } + } else /* Not allowed set MSI-X number twice */ + r = -EINVAL; +msix_nr_out: + mutex_unlock(&kvm->lock); + return r; +} + +static int kvm_vm_ioctl_set_msix_entry(struct kvm *kvm, + struct kvm_assigned_msix_entry *entry) +{ + int r = 0, i; + struct kvm_assigned_dev_kernel *adev; + + mutex_lock(&kvm->lock); + + adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, + entry->assigned_dev_id); + + if (!adev) { + r = -EINVAL; + goto msix_entry_out; + } + + for (i = 0; i < adev->entries_nr; i++) + if (adev->guest_msix_entries[i].vector == 0 || + adev->guest_msix_entries[i].entry == entry->entry) { + adev->guest_msix_entries[i].entry = entry->entry; + adev->guest_msix_entries[i].vector = entry->gsi; + adev->host_msix_entries[i].entry = entry->entry; + break; + } + if (i == adev->entries_nr) { + r = -ENOSPC; + goto msix_entry_out; + } + +msix_entry_out: + mutex_unlock(&kvm->lock); + + return r; +} +#endif + static long kvm_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { @@ -1864,6 +2124,11 @@ static long kvm_vm_ioctl(struct file *filp, break; } case KVM_ASSIGN_IRQ: { + r = -EOPNOTSUPP; + break; + } +#ifdef KVM_CAP_ASSIGN_DEV_IRQ + case KVM_ASSIGN_DEV_IRQ: { struct kvm_assigned_irq assigned_irq; r = -EFAULT; @@ -1874,6 +2139,18 @@ static long kvm_vm_ioctl(struct file *filp, goto out; break; } + case KVM_DEASSIGN_DEV_IRQ: { + struct kvm_assigned_irq assigned_irq; + + r = -EFAULT; + if (copy_from_user(&assigned_irq, argp, sizeof assigned_irq)) + goto out; + r = kvm_vm_ioctl_deassign_dev_irq(kvm, &assigned_irq); + if (r) + goto out; + break; + } +#endif #endif #ifdef KVM_CAP_DEVICE_DEASSIGNMENT case KVM_DEASSIGN_PCI_DEVICE: { @@ -1917,7 +2194,29 @@ static long kvm_vm_ioctl(struct file *filp, vfree(entries); break; } +#ifdef __KVM_HAVE_MSIX + case KVM_ASSIGN_SET_MSIX_NR: { + struct kvm_assigned_msix_nr entry_nr; + r = -EFAULT; + if (copy_from_user(&entry_nr, argp, sizeof entry_nr)) + goto out; + r = kvm_vm_ioctl_set_msix_nr(kvm, &entry_nr); + if (r) + goto out; + break; + } + case KVM_ASSIGN_SET_MSIX_ENTRY: { + struct kvm_assigned_msix_entry entry; + r = -EFAULT; + if (copy_from_user(&entry, argp, sizeof entry)) + goto out; + r = kvm_vm_ioctl_set_msix_entry(kvm, &entry); + if (r) + goto out; + break; + } #endif +#endif /* KVM_CAP_IRQ_ROUTING */ default: r = kvm_arch_vm_ioctl(filp, ioctl, arg); } @@ -2112,15 +2411,15 @@ EXPORT_SYMBOL_GPL(kvm_handle_fault_on_reboot); static int kvm_reboot(struct notifier_block *notifier, unsigned long val, void *v) { - if (val == SYS_RESTART) { - /* - * Some (well, at least mine) BIOSes hang on reboot if - * in vmx root mode. - */ - printk(KERN_INFO "kvm: exiting hardware virtualization\n"); - kvm_rebooting = true; - on_each_cpu(hardware_disable, NULL, 1); - } + /* + * Some (well, at least mine) BIOSes hang on reboot if + * in vmx root mode. + * + * And Intel TXT required VMX off for all cpu when system shutdown. + */ + printk(KERN_INFO "kvm: exiting hardware virtualization\n"); + kvm_rebooting = true; + on_each_cpu(hardware_disable, NULL, 1); return NOTIFY_OK; } @@ -2305,7 +2604,6 @@ int kvm_init(void *opaque, unsigned int vcpu_size, r = -ENOMEM; goto out_free_0; } - cpumask_clear(cpus_hardware_enabled); r = kvm_arch_hardware_setup(); if (r < 0) @@ -2354,9 +2652,6 @@ int kvm_init(void *opaque, unsigned int vcpu_size, kvm_preempt_ops.sched_in = kvm_sched_in; kvm_preempt_ops.sched_out = kvm_sched_out; -#ifndef CONFIG_X86 - msi2intx = 0; -#endif return 0;