This is the core of the KGDB stub. It provides all of the common code, documentation and basic Kconfig changes, as well as the common hooks. Signed-off-by: Milind Dumbare Signed-off-by: Bob Picco Signed-off-by: Dmitry Antipov Signed-off-by: Tom Rini Documentation/DocBook/Makefile | 3 Documentation/DocBook/kgdb.tmpl | 234 +++++ MAINTAINERS | 9 include/linux/kgdb.h | 274 ++++++ kernel/Makefile | 1 kernel/kgdb.c | 1761 ++++++++++++++++++++++++++++++++++++++++ kernel/kgdbarchlib.c | 198 ++++ kernel/sched.c | 4 lib/Kconfig.debug | 54 + 9 files changed, 2537 insertions(+), 1 deletion(-) Index: linux-2.6.18-rc7/Documentation/DocBook/Makefile =================================================================== --- linux-2.6.18-rc7.orig/Documentation/DocBook/Makefile 2006-10-13 16:56:52.000000000 +0100 +++ linux-2.6.18-rc7/Documentation/DocBook/Makefile 2006-10-13 17:04:22.000000000 +0100 @@ -11,7 +11,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mc procfs-guide.xml writing_usb_driver.xml \ kernel-api.xml journal-api.xml lsm.xml usb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ - genericirq.xml + genericirq.xml kgdb.xml ### # The build process is as follows (targets): Index: linux-2.6.18-rc7/Documentation/DocBook/kgdb.tmpl =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.18-rc7/Documentation/DocBook/kgdb.tmpl 2006-10-13 17:03:56.000000000 +0100 @@ -0,0 +1,234 @@ + + + + + + KGDB Internals + + + + Tom + Rini + +
+ trini@kernel.crashing.org +
+ + + + + + + Amit S. + Kale + +
+ amitkale@linsyssoft.com +
+ + + + + + 2004-2005 + MontaVista Software, Inc. + + + 2004 + Amit S. Kale + + + + + This file is licensed under the terms of the GNU General Public License + version 2. This program is licensed "as is" without any warranty of any + kind, whether express or implied. + + + + + + + + Introduction + + kgdb is a source level debugger for linux kernel. It is used along + with gdb to debug a linux kernel. Kernel developers can debug a kernel + similar to application programs with the use of kgdb. It makes it + possible to place breakpoints in kernel code, step through the code + and observe variables. + + + Two machines are required for using kgdb. One of these machines is a + development machine and the other is a test machine. The machines are + typically connected through a serial line, a null-modem cable which + connects their serial ports. It is also possible however, to use an + ethernet connection between the machines. The kernel to be debugged + runs on the test machine. gdb runs on the development machine. The + serial line or ethernet connection is used by gdb to communicate to + the kernel being debugged. + + + + Compiling a kernel + + To enable CONFIG_KGDB, look under the "Kernel debugging" + and then select "KGDB: kernel debugging with remote gdb". + + + The first choice for I/O is CONFIG_KGDB_ONLY_MODULES. + This means that you will only be able to use KGDB after loading a + kernel module that defines how you want to be able to talk with + KGDB. There are two other choices (more on some architectures) that + can be enabled as modules later, if not picked here. + + The first of these is CONFIG_KGDB_8250_NOMODULE. + This has sub-options such as CONFIG_KGDB_SIMPLE_SERIAL + which toggles choosing the serial port by ttyS number or by specifying + a port and IRQ number. + + + The second of these choices on most systems for I/O is + CONFIG_KGDBOE. This requires that the machine to be + debugged has an ethernet card which supports the netpoll API, such as + the cards supported by CONFIG_E100. There are no + sub-options for this, but a kernel command line option is required. + + + + Booting the kernel + + The Kernel command line option kgdbwait makes kgdb + wait for gdb connection during booting of a kernel. If the + CONFIG_KGDB_8250 driver is used (or if applicable, + another serial driver) this breakpoint will happen very early on, before + console output. If you wish to change serial port information and you + have enabled both CONFIG_KGDB_8250 and + CONFIG_KGDB_SIMPLE_SERIAL then you must pass the option + kgdb8250=<io or mmio>,<address>,<baud + rate>,<irq> before kgdbwait. + The values io or mmio refer to + if the address being passed next needs to be memory mapped + (mmio) or not. The address must + be passed in hex and is the hardware address and will be remapped if + passed as mmio. The value + baud rate and irq are base-10. + The supported values for baud rate are + 9600, 19200, + 38400, 57600, and + 115200. + + + To have KGDB stop the kernel and wait, with the compiled values for the + serial driver, pass in: kgdbwait. + + + To specify the values of the serial port at boot: + kgdb8250=io,3f8,115200,3. + On IA64 this could also be: + kgdb8250=mmio,0xff5e0000,115200,74 + And to have KGDB also stop the kernel and wait for GDB to connect, pass in + kgdbwait after this arguement. + + + To configure the CONFIG_KGDBOE driver, pass in + kgdboe=[src-port]@<src-ip>/[dev],[tgt-port]@<tgt-ip>/[tgt-macaddr] + where: + + src-port (optional): source for UDP packets (defaults to 6443) + src-ip: source IP to use (interface address) + dev (optional): network interface (eth0) + tgt-port (optional): port GDB will use (defaults to 6442) + tgt-ip: IP address GDB will be connecting from + tgt-macaddr (optional): ethernet MAC address for logging agent (default is broadcast) + + + + The CONFIG_KGDBOE driver can be reconfigured at run + time, if CONFIG_SYSFS and + CONFIG_MODULES by echo'ing a new config string to + /sys/module/kgdboe/parameter/kgdboe. The + driver can be unconfigured with the special string + not_configured. + + + + Connecting gdb + + If you have used any of the methods to have KGDB stop and create + an initial breakpoint described in the previous chapter, kgdb prints + the message "Waiting for connection from remote gdb..." on the console + and waits for connection from gdb. At this point you connect gdb to kgdb. + + + Example (serial): + + + % gdb ./vmlinux + (gdb) set remotebaud 115200 + (gdb) target remote /dev/ttyS0 + + + Example (ethernet): + + + % gdb ./vmlinux + (gdb) target remote udp:192.168.2.2:6443 + + + Once connected, you can debug a kernel the way you would debug an + application program. + + + + The common backend (required) + + There are a few flags which must be set on every architecture in + their <asm/kgdb.h> file. These are: + + + + NUMREGBYTES: The size in bytes of all of the registers, so + that we can ensure they will all fit into a packet. + + + BUFMAX: The size in bytes of the buffer GDB will read into. + This must be larger than NUMREGBYTES. + + + CACHE_FLUSH_IS_SAFE: Set to one if it always safe to call + flush_cache_range or flush_icache_range. On some architectures, + these functions may not be safe to call on SMP since we keep other + CPUs in a holding pattern. + + + + + + There are also the following functions for the common backend, + found in kernel/kgdb.c that must be supplied by the + architecture-specific backend. No weak version of these is provided. + +!Iinclude/linux/kgdb.h + + + The common backend (optional) + + These functions are part of the common backend, found in kernel/kgdb.c + and are optionally implemented. Some functions (with _hw_ in the name) + end up being required on arches which use hardware breakpoints. + +!Ikernel/kgdb.c + + + Driver-Specific Functions + + Some of the I/O drivers have additional functions that can be + called, that are specific to the driver. Calls from other places + to these functions must be wrapped in #ifdefs for the driver in + question. + +!Idrivers/serial/8250_kgdb.c + + Index: linux-2.6.18-rc7/lib/Kconfig.debug =================================================================== --- linux-2.6.18-rc7.orig/lib/Kconfig.debug 2006-10-13 16:56:52.000000000 +0100 +++ linux-2.6.18-rc7/lib/Kconfig.debug 2006-10-13 17:03:56.000000000 +0100 @@ -368,3 +368,57 @@ config RCU_TORTURE_TEST at boot time (you probably don't). Say M if you want the RCU torture tests to build as a module. Say N if you are unsure. + +config WANT_EXTRA_DEBUG_INFORMATION + bool + select DEBUG_INFO + select FRAME_POINTER if X86 + default n + +config KGDB + bool "KGDB: kernel debugging with remote gdb" + select WANT_EXTRA_DEBUG_INFORMATION + depends on DEBUG_KERNEL + help + If you say Y here, it will be possible to remotely debug the + kernel using gdb. It is strongly suggested that you enable + DEBUG_INFO, and if available on your platform, FRAME_POINTER. + Documentation of kernel debugger available at + http://kgdb.sourceforge.net as well as in DocBook form + in Documentation/DocBook/. If unsure, say N. + +config KGDB_CONSOLE + bool "KGDB: Console messages through gdb" + depends on KGDB + help + If you say Y here, console messages will appear through gdb. + Other consoles such as tty or ttyS will continue to work as usual. + Note, that if you use this in conjunction with KGDB_ETH, if the + ethernet driver runs into an error condition during use with KGDB + it is possible to hit an infinite recusrion, causing the kernel + to crash, and typically reboot. For this reason, it is preferable + to use NETCONSOLE in conjunction with KGDB_ETH instead of + KGDB_CONSOLE. + +choice + prompt "Method for KGDB communication" + depends on KGDB + default KGDB_ONLY_MODULES + help + There are a number of different ways in which you can communicate + with KGDB. The most common is via serial, with the 8250 driver + (should your hardware have an 8250, or ns1655x style uart). + Another option is to use the NETPOLL framework and UDP, should + your ethernet card support this. Other options may exist. + You can elect to have one core I/O driver that is built into the + kernel for debugging as the kernel is booting, or using only + kernel modules. + +config KGDB_ONLY_MODULES + bool "KGDB: Use only kernel modules for I/O" + depends on MODULES + help + Use only kernel modules to configure KGDB I/O after the + kernel is booted. + +endchoice Index: linux-2.6.18-rc7/kernel/kgdb.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.18-rc7/kernel/kgdb.c 2006-10-13 17:03:56.000000000 +0100 @@ -0,0 +1,1761 @@ +/* + * kernel/kgdb.c + * + * Maintainer: Tom Rini + * + * Copyright (C) 2000-2001 VERITAS Software Corporation. + * Copyright (C) 2002-2004 Timesys Corporation + * Copyright (C) 2003-2004 Amit S. Kale + * Copyright (C) 2004 Pavel Machek + * Copyright (C) 2004-2005 Tom Rini + * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. + * Copyright (C) 2005 Wind River Systems, Inc. + * + * Contributors at various stages not listed above: + * Jason Wessel ( jason.wessel@windriver.com ) + * George Anzinger + * Anurekh Saxena (anurekh.saxena@timesys.com) + * Lake Stevens Instrument Division (Glenn Engel) + * Jim Kingdon, Cygnus Support. + * + * Original KGDB stub: David Grothe , + * Tigran Aivazian + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern int pid_max; +/* How many times to count all of the waiting CPUs */ +#define ROUNDUP_WAIT 640000 /* Arbitrary, increase if needed. */ +#define BUF_THREAD_ID_SIZE 16 + +/* + * kgdb_initialized with a value of 1 indicates that kgdb is setup and is + * all ready to serve breakpoints and other kernel exceptions. A value of + * -1 indicates that we have tried to initialize early, and need to try + * again later. + */ +int kgdb_initialized; +/* Is a host GDB connected to us? */ +int kgdb_connected; +/* Could we be about to try and access a bad memory location? If so we + * also need to flag this has happend. */ +int kgdb_may_fault; +/* All the KGDB handlers are installed */ +int kgdb_from_module_registered = 0; + +/* We provide a kgdb_io_ops structure that may be overriden. */ +struct kgdb_io __attribute__ ((weak)) kgdb_io_ops; + +static struct kgdb_io kgdb_io_ops_prev[MAX_KGDB_IO_HANDLERS]; +static int kgdb_io_handler_cnt = 0; + +/* Export the following symbols for use with kernel modules */ +EXPORT_SYMBOL(kgdb_io_ops); +EXPORT_SYMBOL(kgdb_tasklet_breakpoint); +EXPORT_SYMBOL(kgdb_connected); +EXPORT_SYMBOL(kgdb_register_io_module); +EXPORT_SYMBOL(kgdb_unregister_io_module); +EXPORT_SYMBOL(debugger_active); + +/* + * Holds information about breakpoints in a kernel. These breakpoints are + * added and removed by gdb. + */ +struct kgdb_bkpt kgdb_break[MAX_BREAKPOINTS]; + +static const char hexchars[] = "0123456789abcdef"; + +static spinlock_t slavecpulocks[NR_CPUS]; +static atomic_t procindebug[NR_CPUS]; +atomic_t kgdb_setting_breakpoint; +EXPORT_SYMBOL(kgdb_setting_breakpoint); +struct task_struct *kgdb_usethread, *kgdb_contthread; + +int debugger_step; +atomic_t debugger_active; + +/* Our I/O buffers. */ +static char remcom_in_buffer[BUFMAX]; +static char remcom_out_buffer[BUFMAX]; +/* Storage for the registers, in GDB format. */ +static unsigned long gdb_regs[(NUMREGBYTES + sizeof(unsigned long) - 1) / + sizeof(unsigned long)]; +/* Storage of registers for handling a fault. */ +unsigned long kgdb_fault_jmp_regs[NUMCRITREGBYTES / sizeof(unsigned long)] + JMP_REGS_ALIGNMENT; +static int kgdb_notify_reboot(struct notifier_block *this, + unsigned long code ,void *x); +struct debuggerinfo_struct { + void *debuggerinfo; + struct task_struct *task; +} kgdb_info[NR_CPUS]; + +/* to keep track of the CPU which is doing the single stepping*/ +atomic_t cpu_doing_single_step = ATOMIC_INIT(-1); + +/* reboot notifier block */ +static struct notifier_block kgdb_reboot_notifier = { + .notifier_call = kgdb_notify_reboot, + .next = NULL, + .priority = INT_MAX, +}; + +static int hex(char ch) +{ + if ((ch >= 'a') && (ch <= 'f')) + return (ch - 'a' + 10); + if ((ch >= '0') && (ch <= '9')) + return (ch - '0'); + if ((ch >= 'A') && (ch <= 'F')) + return (ch - 'A' + 10); + return (-1); +} + +/* scan for the sequence $# */ +static void get_packet(char *buffer) +{ + unsigned char checksum; + unsigned char xmitcsum; + int count; + char ch; + if (!kgdb_io_ops.read_char) + return; + do { + /* Spin and wait around for the start character, ignore all + * other characters */ + while ((ch = (kgdb_io_ops.read_char())) != '$') ; + kgdb_connected = 1; + checksum = 0; + xmitcsum = -1; + + count = 0; + + /* now, read until a # or end of buffer is found */ + while (count < (BUFMAX - 1)) { + ch = kgdb_io_ops.read_char(); + if (ch == '#') + break; + checksum = checksum + ch; + buffer[count] = ch; + count = count + 1; + } + buffer[count] = 0; + + if (ch == '#') { + xmitcsum = hex(kgdb_io_ops.read_char()) << 4; + xmitcsum += hex(kgdb_io_ops.read_char()); + + if (checksum != xmitcsum) + /* failed checksum */ + kgdb_io_ops.write_char('-'); + else + /* successful transfer */ + kgdb_io_ops.write_char('+'); + if (kgdb_io_ops.flush) + kgdb_io_ops.flush(); + } + } while (checksum != xmitcsum); +} + +/* + * Send the packet in buffer. + * Check for gdb connection if asked for. + */ +static void put_packet(char *buffer) +{ + unsigned char checksum; + int count; + char ch; + + if (!kgdb_io_ops.write_char) + return; + /* $#. */ + while (1) { + kgdb_io_ops.write_char('$'); + checksum = 0; + count = 0; + + while ((ch = buffer[count])) { + kgdb_io_ops.write_char(ch); + checksum += ch; + count++; + } + + kgdb_io_ops.write_char('#'); + kgdb_io_ops.write_char(hexchars[checksum >> 4]); + kgdb_io_ops.write_char(hexchars[checksum % 16]); + if (kgdb_io_ops.flush) + kgdb_io_ops.flush(); + + /* Now see what we get in reply. */ + ch = kgdb_io_ops.read_char(); + + if (ch == 3) + ch = kgdb_io_ops.read_char(); + + /* If we get an ACK, we are done. */ + if (ch == '+') + return; + + /* If we get the start of another packet, this means + * that GDB is attempting to reconnect. We will NAK + * the packet being sent, and stop trying to send this + * packet. */ + if (ch == '$') { + kgdb_io_ops.write_char('-'); + if (kgdb_io_ops.flush) + kgdb_io_ops.flush(); + return; + } + } +} + +/* + * convert the memory pointed to by mem into hex, placing result in buf + * return a pointer to the last char put in buf (null). May return an error. + */ +char *kgdb_mem2hex(char *mem, char *buf, int count) +{ + kgdb_may_fault = 1; + if ((kgdb_fault_setjmp(kgdb_fault_jmp_regs)) != 0) { + kgdb_may_fault = 0; + return ERR_PTR(-EINVAL); + } + /* Accessing some registers in a single load instruction is + * required to avoid bad side effects for some I/O registers. + */ + if ((count == 2) && (((long)mem & 1) == 0)) { + unsigned short tmp_s = *(unsigned short *)mem; + mem += 2; +#ifdef __BIG_ENDIAN + *buf++ = hexchars[(tmp_s >> 12) & 0xf]; + *buf++ = hexchars[(tmp_s >> 8) & 0xf]; + *buf++ = hexchars[(tmp_s >> 4) & 0xf]; + *buf++ = hexchars[tmp_s & 0xf]; +#else + *buf++ = hexchars[(tmp_s >> 4) & 0xf]; + *buf++ = hexchars[tmp_s & 0xf]; + *buf++ = hexchars[(tmp_s >> 12) & 0xf]; + *buf++ = hexchars[(tmp_s >> 8) & 0xf]; +#endif + } else if ((count == 4) && (((long)mem & 3) == 0)) { + unsigned long tmp_l = *(unsigned int *)mem; + mem += 4; +#ifdef __BIG_ENDIAN + *buf++ = hexchars[(tmp_l >> 28) & 0xf]; + *buf++ = hexchars[(tmp_l >> 24) & 0xf]; + *buf++ = hexchars[(tmp_l >> 20) & 0xf]; + *buf++ = hexchars[(tmp_l >> 16) & 0xf]; + *buf++ = hexchars[(tmp_l >> 12) & 0xf]; + *buf++ = hexchars[(tmp_l >> 8) & 0xf]; + *buf++ = hexchars[(tmp_l >> 4) & 0xf]; + *buf++ = hexchars[tmp_l & 0xf]; +#else + *buf++ = hexchars[(tmp_l >> 4) & 0xf]; + *buf++ = hexchars[tmp_l & 0xf]; + *buf++ = hexchars[(tmp_l >> 12) & 0xf]; + *buf++ = hexchars[(tmp_l >> 8) & 0xf]; + *buf++ = hexchars[(tmp_l >> 20) & 0xf]; + *buf++ = hexchars[(tmp_l >> 16) & 0xf]; + *buf++ = hexchars[(tmp_l >> 28) & 0xf]; + *buf++ = hexchars[(tmp_l >> 24) & 0xf]; +#endif +#ifdef CONFIG_64BIT + } else if ((count == 8) && (((long)mem & 7) == 0)) { + unsigned long long tmp_ll = *(unsigned long long *)mem; + mem += 8; +#ifdef __BIG_ENDIAN + *buf++ = hexchars[(tmp_ll >> 60) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 56) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 52) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 48) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 44) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 40) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 36) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 32) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 28) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 24) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 20) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 16) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 12) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 8) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 4) & 0xf]; + *buf++ = hexchars[tmp_ll & 0xf]; +#else + *buf++ = hexchars[(tmp_ll >> 4) & 0xf]; + *buf++ = hexchars[tmp_ll & 0xf]; + *buf++ = hexchars[(tmp_ll >> 12) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 8) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 20) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 16) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 28) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 24) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 36) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 32) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 44) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 40) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 52) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 48) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 60) & 0xf]; + *buf++ = hexchars[(tmp_ll >> 56) & 0xf]; +#endif +#endif + } else { + while (count-- > 0) { + unsigned char ch = *mem++; + *buf++ = hexchars[ch >> 4]; + *buf++ = hexchars[ch & 0xf]; + } + } + kgdb_may_fault = 0; + *buf = 0; + return (buf); +} + +/* + * Copy the binary array pointed to by buf into mem. Fix $, #, and + * 0x7d escaped with 0x7d. Return a pointer to the character after + * the last byte written. + */ +static char *kgdb_ebin2mem(char *buf, char *mem, int count) +{ + kgdb_may_fault = 1; + if ((kgdb_fault_setjmp(kgdb_fault_jmp_regs)) != 0) { + kgdb_may_fault = 0; + return ERR_PTR(-EINVAL); + } + for (; count > 0; count--, buf++) { + if (*buf == 0x7d) + *mem++ = *(++buf) ^ 0x20; + else + *mem++ = *buf; + } + kgdb_may_fault = 0; + return mem; +} + +/* + * convert the hex array pointed to by buf into binary to be placed in mem + * return a pointer to the character AFTER the last byte written + * May return an error. + */ +char *kgdb_hex2mem(char *buf, char *mem, int count) +{ + kgdb_may_fault = 1; + if ((kgdb_fault_setjmp(kgdb_fault_jmp_regs)) != 0) { + kgdb_may_fault = 0; + return ERR_PTR(-EINVAL); + } + if ((count == 2) && (((long)mem & 1) == 0)) { + unsigned short tmp_s = 0; +#ifdef __BIG_ENDIAN + tmp_s |= hex(*buf++) << 12; + tmp_s |= hex(*buf++) << 8; + tmp_s |= hex(*buf++) << 4; + tmp_s |= hex(*buf++); +#else + tmp_s |= hex(*buf++) << 4; + tmp_s |= hex(*buf++); + tmp_s |= hex(*buf++) << 12; + tmp_s |= hex(*buf++) << 8; +#endif + *(unsigned short *)mem = tmp_s; + mem += 2; + } else if ((count == 4) && (((long)mem & 3) == 0)) { + unsigned long tmp_l = 0; +#ifdef __BIG_ENDIAN + tmp_l |= hex(*buf++) << 28; + tmp_l |= hex(*buf++) << 24; + tmp_l |= hex(*buf++) << 20; + tmp_l |= hex(*buf++) << 16; + tmp_l |= hex(*buf++) << 12; + tmp_l |= hex(*buf++) << 8; + tmp_l |= hex(*buf++) << 4; + tmp_l |= hex(*buf++); +#else + tmp_l |= hex(*buf++) << 4; + tmp_l |= hex(*buf++); + tmp_l |= hex(*buf++) << 12; + tmp_l |= hex(*buf++) << 8; + tmp_l |= hex(*buf++) << 20; + tmp_l |= hex(*buf++) << 16; + tmp_l |= hex(*buf++) << 28; + tmp_l |= hex(*buf++) << 24; +#endif + *(unsigned long *)mem = tmp_l; + mem += 4; + } else { + int i; + for (i = 0; i < count; i++) { + unsigned char ch = hex(*buf++) << 4; + ch |= hex(*buf++); + *mem++ = ch; + } + } + kgdb_may_fault = 0; + return (mem); +} + +/* + * While we find nice hex chars, build a long_val. + * Return number of chars processed. + */ +int kgdb_hex2long(char **ptr, long *long_val) +{ + int hex_val, num = 0; + + *long_val = 0; + + while (**ptr) { + hex_val = hex(**ptr); + if (hex_val >= 0) { + *long_val = (*long_val << 4) | hex_val; + num++; + } else + break; + + (*ptr)++; + } + + return (num); +} + +/* Write memory due to an 'M' or 'X' packet. */ +static char *write_mem_msg(int binary) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long addr, length; + + if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' && + kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') { + if (binary) + ptr = kgdb_ebin2mem(ptr, (char *)addr, length); + else + ptr = kgdb_hex2mem(ptr, (char *)addr, length); + if (CACHE_FLUSH_IS_SAFE) + flush_icache_range(addr, addr + length + 1); + if (IS_ERR(ptr)) + return ptr; + return NULL; + } + + return ERR_PTR(-EINVAL); +} + +static inline char *pack_hex_byte(char *pkt, int byte) +{ + *pkt++ = hexchars[(byte >> 4) & 0xf]; + *pkt++ = hexchars[(byte & 0xf)]; + return pkt; +} + +static inline void error_packet(char *pkt, int error) +{ + error = -error; + pkt[0] = 'E'; + pkt[1] = hexchars[(error / 10)]; + pkt[2] = hexchars[(error % 10)]; + pkt[3] = '\0'; +} + +static char *pack_threadid(char *pkt, threadref * id) +{ + char *limit; + unsigned char *altid; + + altid = (unsigned char *)id; + limit = pkt + BUF_THREAD_ID_SIZE; + while (pkt < limit) + pkt = pack_hex_byte(pkt, *altid++); + + return pkt; +} + +void int_to_threadref(threadref * id, int value) +{ + unsigned char *scan; + int i = 4; + + scan = (unsigned char *)id; + while (i--) + *scan++ = 0; + *scan++ = (value >> 24) & 0xff; + *scan++ = (value >> 16) & 0xff; + *scan++ = (value >> 8) & 0xff; + *scan++ = (value & 0xff); +} + +static struct task_struct *getthread(struct pt_regs *regs, int tid) +{ + if (last_pid != 0) + return current; + + if (num_online_cpus() && + (tid >= pid_max + num_online_cpus() + kgdb_ops->shadowth)) + return NULL; + + if (kgdb_ops->shadowth && (tid >= pid_max + num_online_cpus())) + return kgdb_get_shadow_thread(regs, tid - pid_max - + num_online_cpus()); + + if (tid >= pid_max) + return idle_task(tid - pid_max); + + if (!tid) + return NULL; + + return find_task_by_pid(tid); +} + +#ifdef CONFIG_SMP +static void kgdb_wait(struct pt_regs *regs) +{ + unsigned long flags; + int processor; + + local_irq_save(flags); + processor = smp_processor_id(); + kgdb_info[processor].debuggerinfo = regs; + kgdb_info[processor].task = current; + atomic_set(&procindebug[processor], 1); + + /* Wait till master processor goes completely into the debugger. + * FIXME: this looks racy */ + while (!atomic_read(&procindebug[atomic_read(&debugger_active) - 1])) { + int i = 10; /* an arbitrary number */ + + while (--i) + cpu_relax(); + } + + /* Wait till master processor is done with debugging */ + spin_lock(&slavecpulocks[processor]); + + /* This has been taken from x86 kgdb implementation and + * will be needed by architectures that have SMP support + */ + kgdb_correct_hw_break(); + + kgdb_info[processor].debuggerinfo = NULL; + kgdb_info[processor].task = NULL; + + /* Signal the master processor that we are done */ + atomic_set(&procindebug[processor], 0); + spin_unlock(&slavecpulocks[processor]); + local_irq_restore(flags); +} +#endif + +int kgdb_get_mem(char *addr, unsigned char *buf, int count) +{ + kgdb_may_fault = 1; + if ((kgdb_fault_setjmp(kgdb_fault_jmp_regs)) != 0) { + kgdb_may_fault = 0; + return -EINVAL; + } + while (count) { + if ((unsigned long)addr < TASK_SIZE) + return -EINVAL; + *buf++ = *addr++; + count--; + } + kgdb_may_fault = 0; + return 0; +} + +int kgdb_set_mem(char *addr, unsigned char *buf, int count) +{ + kgdb_may_fault = 1; + if ((kgdb_fault_setjmp(kgdb_fault_jmp_regs)) != 0) { + kgdb_may_fault = 0; + return -EINVAL; + } + while (count) { + if ((unsigned long)addr < TASK_SIZE) + return -EINVAL; + *addr++ = *buf++; + count--; + } + kgdb_may_fault = 0; + return 0; +} +int kgdb_activate_sw_breakpoints(void) +{ + int i; + int error = 0; + unsigned long addr; + for (i = 0; i < MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != bp_set) + continue; + addr = kgdb_break[i].bpt_addr; + if ((error = kgdb_arch_set_breakpoint(addr, + kgdb_break[i].saved_instr))) + return error; + + if (CACHE_FLUSH_IS_SAFE) { + if (current->mm && addr < TASK_SIZE) + flush_cache_range(current->mm->mmap_cache, + addr, addr + BREAK_INSTR_SIZE); + else + flush_icache_range(addr, addr + + BREAK_INSTR_SIZE); + } + + kgdb_break[i].state = bp_active; + } + return 0; +} + +static int kgdb_set_sw_break(unsigned long addr) +{ + int i, breakno = -1; + int error = 0; + if ((error = kgdb_validate_break_address(addr)) < 0) + return error; + for (i = 0; i < MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == bp_set) && + (kgdb_break[i].bpt_addr == addr)) + return -EEXIST; + } + for (i = 0; i < MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state == bp_removed && + kgdb_break[i].bpt_addr == addr) { + breakno = i; + break; + } + } + + if (breakno == -1) { + for (i = 0; i < MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state == bp_none) { + breakno = i; + break; + } + } + } + if (breakno == -1) + return -E2BIG; + + kgdb_break[breakno].state = bp_set; + kgdb_break[breakno].type = bp_breakpoint; + kgdb_break[breakno].bpt_addr = addr; + + return 0; +} + +int kgdb_deactivate_sw_breakpoints(void) +{ + int i; + int error = 0; + unsigned long addr; + for (i = 0; i < MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != bp_active) + continue; + addr = kgdb_break[i].bpt_addr; + if ((error = kgdb_arch_remove_breakpoint(addr, + kgdb_break[i].saved_instr))) + return error; + + if (CACHE_FLUSH_IS_SAFE && current->mm && + addr < TASK_SIZE) + flush_cache_range(current->mm->mmap_cache, + addr, addr + BREAK_INSTR_SIZE); + else if (CACHE_FLUSH_IS_SAFE) + flush_icache_range(addr, + addr + BREAK_INSTR_SIZE); + kgdb_break[i].state = bp_set; + } + return 0; +} + +static int kgdb_remove_sw_break(unsigned long addr) +{ + int i; + + for (i = 0; i < MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == bp_set) && + (kgdb_break[i].bpt_addr == addr)) { + kgdb_break[i].state = bp_removed; + return 0; + } + } + return -ENOENT; +} + +int kgdb_isremovedbreak(unsigned long addr) +{ + int i; + for (i = 0; i < MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == bp_removed) && + (kgdb_break[i].bpt_addr == addr)) { + return 1; + } + } + return 0; +} + +int remove_all_break(void) +{ + int i; + int error; + unsigned long addr; + + /* Clear memory breakpoints. */ + for (i = 0; i < MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != bp_set) + continue; + addr = kgdb_break[i].bpt_addr; + if ((error = kgdb_arch_remove_breakpoint(addr, + kgdb_break[i].saved_instr))) + return error; + kgdb_break[i].state = bp_removed; + } + + /* Clear hardware breakpoints. */ + kgdb_remove_all_hw_break(); + + return 0; +} + +static inline int shadow_pid(int realpid) +{ + if (realpid) { + return realpid; + } + return pid_max + smp_processor_id(); +} + +static char gdbmsgbuf[BUFMAX + 1]; +static void kgdb_msg_write(const char *s, int len) +{ + int i; + int wcount; + char *bufptr; + + /* 'O'utput */ + gdbmsgbuf[0] = 'O'; + + /* Fill and send buffers... */ + while (len > 0) { + bufptr = gdbmsgbuf + 1; + + /* Calculate how many this time */ + if ((len << 1) > (BUFMAX - 2)) + wcount = (BUFMAX - 2) >> 1; + else + wcount = len; + + /* Pack in hex chars */ + for (i = 0; i < wcount; i++) + bufptr = pack_hex_byte(bufptr, s[i]); + *bufptr = '\0'; + + /* Move up */ + s += wcount; + len -= wcount; + + /* Write packet */ + put_packet(gdbmsgbuf); + } +} + +/* + * This function does all command procesing for interfacing to gdb. + * + * Locking hierarchy: + * interface locks, if any (begin_session) + * kgdb lock (debugger_active) + * + * Note that since we can be in here prior to our cpumask being filled + * out, we err on the side of caution and loop over NR_CPUS instead + * of a for_each_online_cpu. + * + */ +int kgdb_handle_exception(int ex_vector, int signo, int err_code, + struct pt_regs *linux_regs) +{ + unsigned long length, addr; + char *ptr; + unsigned long flags; + unsigned i; + long threadid; + threadref thref; + struct task_struct *thread = NULL; + unsigned procid; + int numshadowth = num_online_cpus() + kgdb_ops->shadowth; + long kgdb_usethreadid = 0; + int error = 0, all_cpus_synced = 0; + struct pt_regs *shadowregs; + int processor = smp_processor_id(); + void *local_debuggerinfo; + + /* Panic on recursive debugger calls. */ + if (atomic_read(&debugger_active) == smp_processor_id() + 1) + return 0; + + acquirelock: + + /* Call the I/O drivers pre_exception routine if the I/O + * driver defined one + */ + if (kgdb_io_ops.pre_exception) + kgdb_io_ops.pre_exception(); + + /* + * Interrupts will be restored by the 'trap return' code, except when + * single stepping. + */ + local_irq_save(flags); + + /* Hold debugger_active */ + procid = smp_processor_id(); + + while (cmpxchg(&atomic_read(&debugger_active), 0, (procid + 1)) != 0) { + int i = 25; /* an arbitrary number */ + + while (--i) + cpu_relax(); + + if (atomic_read(&cpu_doing_single_step) != -1 && + atomic_read(&cpu_doing_single_step) != procid) + udelay(1); + } + + /* + * Don't enter if the last instance of the exception handler wanted to + * come into the debugger again. + */ + if (atomic_read(&cpu_doing_single_step) != -1 && + atomic_read(&cpu_doing_single_step) != procid) { + atomic_set(&debugger_active, 0); + local_irq_restore(flags); + goto acquirelock; + } + + /* + * Don't enter if we have hit a removed breakpoint. + */ + if (kgdb_skipexception(ex_vector, linux_regs)) + goto kgdb_restore; + + kgdb_info[processor].debuggerinfo = linux_regs; + kgdb_info[processor].task = current; + + kgdb_disable_hw_debug(linux_regs); + + if (!debugger_step || !kgdb_contthread) + for (i = 0; i < NR_CPUS; i++) + spin_lock(&slavecpulocks[i]); + + /* Make sure we get the other CPUs */ + if (!debugger_step || !kgdb_contthread) + kgdb_roundup_cpus(flags); + + /* spin_lock code is good enough as a barrier so we don't + * need one here */ + atomic_set(&procindebug[processor], 1); + + /* Wait a reasonable time for the other CPUs to be notified and + * be waiting for us. Very early on this could be imperfect + * as num_online_cpus() could be 0.*/ + for (i = 0; i < ROUNDUP_WAIT; i++) { + int cpu, num = 0; + for (cpu = 0; cpu < NR_CPUS; cpu++) { + if (atomic_read(&procindebug[cpu])) + num++; + } + if (num >= num_online_cpus()) { + all_cpus_synced = 1; + break; + } + } + + /* Clear the out buffer. */ + memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); + + /* Master processor is completely in the debugger */ + kgdb_post_master_code(linux_regs, ex_vector, err_code); + kgdb_deactivate_sw_breakpoints(); + debugger_step = 0; + kgdb_contthread = NULL; + + if (kgdb_connected) { + /* If we're still unable to roundup all of the CPUs, + * send an 'O' packet informing the user again. */ + if (!all_cpus_synced) + kgdb_msg_write("Not all CPUs have been synced for " + "KGDB\n", 39); + /* Reply to host that an exception has occurred */ + ptr = remcom_out_buffer; + *ptr++ = 'T'; + *ptr++ = hexchars[(signo >> 4) % 16]; + *ptr++ = hexchars[signo % 16]; + ptr += strlen(strcpy(ptr, "thread:")); + int_to_threadref(&thref, shadow_pid(current->pid)); + ptr = pack_threadid(ptr, &thref); + *ptr++ = ';'; + + put_packet(remcom_out_buffer); + } + + kgdb_usethread = kgdb_info[processor].task; + kgdb_usethreadid = shadow_pid(kgdb_info[processor].task->pid); + + while (kgdb_io_ops.read_char) { + char *bpt_type; + error = 0; + + /* Clear the out buffer. */ + memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); + + get_packet(remcom_in_buffer); + + switch (remcom_in_buffer[0]) { + case '?': + /* We know that this packet is only sent + * during initial connect. So to be safe, + * we clear out our breakpoints now incase + * GDB is reconnecting. */ + remove_all_break(); + /* Also, if we haven't been able to roundup all + * CPUs, send an 'O' packet informing the user + * as much. Only need to do this once. */ + if (!all_cpus_synced) + kgdb_msg_write("Not all CPUs have been " + "synced for KGDB\n", 39); + remcom_out_buffer[0] = 'S'; + remcom_out_buffer[1] = hexchars[signo >> 4]; + remcom_out_buffer[2] = hexchars[signo % 16]; + break; + + case 'g': /* return the value of the CPU registers */ + thread = kgdb_usethread; + + if (!thread) { + thread = kgdb_info[processor].task; + local_debuggerinfo = + kgdb_info[processor].debuggerinfo; + } else { + local_debuggerinfo = NULL; + for (i = 0; i < NR_CPUS; i++) { + /* Try to find the task on some other + * or possibly this node if we do not + * find the matching task then we try + * to approximate the results. + */ + if (thread == kgdb_info[i].task) + local_debuggerinfo = + kgdb_info[i].debuggerinfo; + } + } + + /* All threads that don't have debuggerinfo should be + * in __schedule() sleeping, since all other CPUs + * are in kgdb_wait, and thus have debuggerinfo. */ + if (kgdb_ops->shadowth && + kgdb_usethreadid >= pid_max + num_online_cpus()) { + shadowregs = kgdb_shadow_regs(linux_regs, + kgdb_usethreadid - + pid_max - + num_online_cpus + ()); + if (!shadowregs) { + error_packet(remcom_out_buffer, + -EINVAL); + break; + } + regs_to_gdb_regs(gdb_regs, shadowregs); + } else if (local_debuggerinfo) + regs_to_gdb_regs(gdb_regs, local_debuggerinfo); + else { + /* Pull stuff saved during + * switch_to; nothing else is + * accessible (or even particularly relevant). + * This should be enough for a stack trace. */ + sleeping_thread_to_gdb_regs(gdb_regs, thread); + } + kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, + NUMREGBYTES); + break; + + /* set the value of the CPU registers - return OK */ + case 'G': + kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, + NUMREGBYTES); + + if (kgdb_usethread && kgdb_usethread != current) + error_packet(remcom_out_buffer, -EINVAL); + else { + gdb_regs_to_regs(gdb_regs, linux_regs); + strcpy(remcom_out_buffer, "OK"); + } + break; + + /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ + case 'm': + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' && + kgdb_hex2long(&ptr, &length) > 0) { + if (IS_ERR(ptr = kgdb_mem2hex((char *)addr, + remcom_out_buffer, + length))) + error_packet(remcom_out_buffer, + PTR_ERR(ptr)); + } else + error_packet(remcom_out_buffer, -EINVAL); + break; + + /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */ + case 'M': + if (IS_ERR(ptr = write_mem_msg(0))) + error_packet(remcom_out_buffer, PTR_ERR(ptr)); + else + strcpy(remcom_out_buffer, "OK"); + break; + /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */ + case 'X': + if (IS_ERR(ptr = write_mem_msg(1))) + error_packet(remcom_out_buffer, PTR_ERR(ptr)); + else + strcpy(remcom_out_buffer, "OK"); + break; + + /* kill or detach. KGDB should treat this like a + * continue. + */ + case 'D': + if ((error = remove_all_break()) < 0) { + error_packet(remcom_out_buffer, error); + } else { + strcpy(remcom_out_buffer, "OK"); + kgdb_connected = 0; + } + put_packet(remcom_out_buffer); + goto default_handle; + + case 'k': + /* Don't care about error from remove_all_break */ + remove_all_break(); + kgdb_connected = 0; + goto default_handle; + + /* Reboot */ + case 'R': + /* For now, only honor R0 */ + if (strcmp(remcom_in_buffer, "R0") == 0) { + printk(KERN_CRIT "Executing reboot\n"); + strcpy(remcom_out_buffer, "OK"); + put_packet(remcom_out_buffer); + emergency_sync(); + /* Execution should not return from + * machine_restart() + */ + machine_restart(NULL); + kgdb_connected = 0; + goto default_handle; + } + + /* query */ + case 'q': + switch (remcom_in_buffer[1]) { + case 's': + case 'f': + if (memcmp(remcom_in_buffer + 2, "ThreadInfo", + 10)) { + error_packet(remcom_out_buffer, + -EINVAL); + break; + } + + /* + * If we have not yet completed in + * pidhash_init() there isn't much we + * can give back. + */ + if (last_pid != 0) { + if (remcom_in_buffer[1] == 'f') + strcpy(remcom_out_buffer, + "m0000000000000001"); + break; + } + + if (remcom_in_buffer[1] == 'f') { + threadid = 1; + } + remcom_out_buffer[0] = 'm'; + ptr = remcom_out_buffer + 1; + for (i = 0; i < 17 && threadid < pid_max + + numshadowth; threadid++) { + thread = getthread(linux_regs, + threadid); + if (thread) { + int_to_threadref(&thref, + threadid); + pack_threadid(ptr, &thref); + ptr += 16; + *(ptr++) = ','; + i++; + } + } + *(--ptr) = '\0'; + break; + + case 'C': + /* Current thread id */ + strcpy(remcom_out_buffer, "QC"); + + threadid = shadow_pid(current->pid); + + int_to_threadref(&thref, threadid); + pack_threadid(remcom_out_buffer + 2, &thref); + break; + case 'T': + if (memcmp(remcom_in_buffer + 1, + "ThreadExtraInfo,", 16)) { + error_packet(remcom_out_buffer, + -EINVAL); + break; + } + threadid = 0; + ptr = remcom_in_buffer + 17; + kgdb_hex2long(&ptr, &threadid); + if (!getthread(linux_regs, threadid)) { + error_packet(remcom_out_buffer, + -EINVAL); + break; + } + if (threadid < pid_max) { + kgdb_mem2hex(getthread(linux_regs, + threadid)->comm, + remcom_out_buffer, 16); + } else if (threadid >= pid_max + + num_online_cpus()) { + kgdb_shadowinfo(linux_regs, + remcom_out_buffer, + threadid - pid_max - + num_online_cpus()); + } else { + static char tmpstr[23 + + BUF_THREAD_ID_SIZE]; + sprintf(tmpstr, "Shadow task %d" + " for pid 0", + (int)(threadid - pid_max)); + kgdb_mem2hex(tmpstr, remcom_out_buffer, + strlen(tmpstr)); + } + break; + } + break; + + /* task related */ + case 'H': + switch (remcom_in_buffer[1]) { + case 'g': + ptr = &remcom_in_buffer[2]; + kgdb_hex2long(&ptr, &threadid); + thread = getthread(linux_regs, threadid); + if (!thread && threadid > 0) { + error_packet(remcom_out_buffer, + -EINVAL); + break; + } + kgdb_usethread = thread; + kgdb_usethreadid = threadid; + strcpy(remcom_out_buffer, "OK"); + break; + + case 'c': + ptr = &remcom_in_buffer[2]; + kgdb_hex2long(&ptr, &threadid); + if (!threadid) { + kgdb_contthread = NULL; + } else { + thread = getthread(linux_regs, + threadid); + if (!thread && threadid > 0) { + error_packet(remcom_out_buffer, + -EINVAL); + break; + } + kgdb_contthread = thread; + } + strcpy(remcom_out_buffer, "OK"); + break; + } + break; + + /* Query thread status */ + case 'T': + ptr = &remcom_in_buffer[1]; + kgdb_hex2long(&ptr, &threadid); + thread = getthread(linux_regs, threadid); + if (thread) + strcpy(remcom_out_buffer, "OK"); + else + error_packet(remcom_out_buffer, -EINVAL); + break; + /* Since GDB-5.3, it's been drafted that '0' is a software + * breakpoint, '1' is a hardware breakpoint, so let's do + * that. + */ + case 'z': + case 'Z': + bpt_type = &remcom_in_buffer[1]; + ptr = &remcom_in_buffer[2]; + + if (kgdb_ops->set_hw_breakpoint && *bpt_type >= '1') { + /* Unsupported */ + if (*bpt_type > '4') + break; + } else if (*bpt_type != '0' && *bpt_type != '1') + /* Unsupported. */ + break; + /* Test if this is a hardware breakpoint, and + * if we support it. */ + if (*bpt_type == '1' && + !kgdb_ops->flags & KGDB_HW_BREAKPOINT) + /* Unsupported. */ + break; + + if (*(ptr++) != ',') { + error_packet(remcom_out_buffer, -EINVAL); + break; + } else if (kgdb_hex2long(&ptr, &addr)) { + if (*(ptr++) != ',' || + !kgdb_hex2long(&ptr, &length)) { + error_packet(remcom_out_buffer, + -EINVAL); + break; + } + } else { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + + if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0') + error = kgdb_set_sw_break(addr); + else if (remcom_in_buffer[0] == 'Z' && *bpt_type == '1') + error = kgdb_set_hw_break(addr); + else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0') + error = kgdb_remove_sw_break(addr); + else if (remcom_in_buffer[0] == 'z' && *bpt_type == '1') + error = kgdb_remove_hw_break(addr); + else if (remcom_in_buffer[0] == 'Z') + error = kgdb_ops->set_hw_breakpoint(addr, + (int)length, + *bpt_type); + else if (remcom_in_buffer[0] == 'z') + error = kgdb_ops->remove_hw_breakpoint(addr, + (int) + length, + *bpt_type); + + if (error == 0) + strcpy(remcom_out_buffer, "OK"); + else + error_packet(remcom_out_buffer, error); + + break; + case 'c': + case 's': + if (kgdb_contthread && kgdb_contthread != current) { + /* Can't switch threads in kgdb */ + error_packet(remcom_out_buffer, -EINVAL); + break; + } + kgdb_activate_sw_breakpoints(); + /* Followthrough to default processing */ + default: + default_handle: + error = kgdb_arch_handle_exception(ex_vector, signo, + err_code, + remcom_in_buffer, + remcom_out_buffer, + linux_regs); + + if (error >= 0 || remcom_in_buffer[0] == 'D' || + remcom_in_buffer[0] == 'k') + goto kgdb_exit; + + } /* switch */ + + /* reply to the request */ + put_packet(remcom_out_buffer); + } + + kgdb_exit: + /* Call the I/O driver's post_exception routine if the I/O + * driver defined one. + */ + if (kgdb_io_ops.post_exception) + kgdb_io_ops.post_exception(); + + kgdb_info[processor].debuggerinfo = NULL; + kgdb_info[processor].task = NULL; + atomic_set(&procindebug[processor], 0); + + if (!debugger_step || !kgdb_contthread) { + for (i = 0; i < NR_CPUS; i++) + spin_unlock(&slavecpulocks[i]); + /* Wait till all the processors have quit + * from the debugger. */ + for (i = 0; i < NR_CPUS; i++) { + while (atomic_read(&procindebug[i])) { + int j = 10; /* an arbitrary number */ + + while (--j) + cpu_relax(); + } + } + } + +#ifdef CONFIG_SMP + /* This delay has a real purpose. The problem is that if you + * are single-stepping, you are sending an NMI to all the + * other processors to stop them. Interrupts come in, but + * don't get handled. Then you let them go just long enough + * to get into their interrupt routines and use up some stack. + * You stop them again, and then do the same thing. After a + * while you blow the stack on the other processors. This + * delay gives some time for interrupts to be cleared out on + * the other processors. + */ + if (debugger_step) + mdelay(2); +#endif +kgdb_restore: + /* Free debugger_active */ + atomic_set(&debugger_active, 0); + local_irq_restore(flags); + + return error; +} + +/* + * GDB places a breakpoint at this function to know dynamically + * loaded objects. It's not defined static so that only one instance with this + * name exists in the kernel. + */ + +int module_event(struct notifier_block *self, unsigned long val, void *data) +{ + return 0; +} + +static struct notifier_block kgdb_module_load_nb = { + .notifier_call = module_event, +}; + +void kgdb_nmihook(int cpu, void *regs) +{ +#ifdef CONFIG_SMP + if (!atomic_read(&procindebug[cpu]) && atomic_read(&debugger_active) != (cpu + 1)) + kgdb_wait((struct pt_regs *)regs); +#endif +} + +/* + * This is called when a panic happens. All we need to do is + * breakpoint(). + */ +static int kgdb_panic_notify(struct notifier_block *self, unsigned long cmd, + void *ptr) +{ + breakpoint(); + + return 0; +} + +static struct notifier_block kgdb_panic_notifier = { + .notifier_call = kgdb_panic_notify, +}; + +/* + * Initialization that needs to be done in either of our entry points. + */ +static void __init kgdb_internal_init(void) +{ + int i; + + /* Initialize our spinlocks. */ + for (i = 0; i < NR_CPUS; i++) + spin_lock_init(&slavecpulocks[i]); + + for (i = 0; i < MAX_BREAKPOINTS; i++) + kgdb_break[i].state = bp_none; + + /* Initialize the I/O handles */ + memset(&kgdb_io_ops_prev, 0, sizeof(kgdb_io_ops_prev)); + + /* We can't do much if this fails */ + register_module_notifier(&kgdb_module_load_nb); + + kgdb_initialized = 1; +} + +static void kgdb_register_for_panic(void) +{ + /* Register for panics(). */ + /* The registration is done in the kgdb_register_for_panic + * routine because KGDB should not try to handle a panic when + * there are no kgdb_io_ops setup. It is assumed that the + * kgdb_io_ops are setup at the time this method is called. + */ + if (!kgdb_from_module_registered) { + atomic_notifier_chain_register(&panic_notifier_list, + &kgdb_panic_notifier); + kgdb_from_module_registered = 1; + } +} + +static void kgdb_unregister_for_panic(void) +{ + /* When this routine is called KGDB should unregister from the + * panic handler and clean up, making sure it is not handling any + * break exceptions at the time. + */ + if (kgdb_from_module_registered) { + kgdb_from_module_registered = 0; + atomic_notifier_chain_unregister(&panic_notifier_list, + &kgdb_panic_notifier); + } +} + +int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops) +{ + + if (kgdb_connected) { + printk(KERN_ERR "kgdb: Cannot load I/O module while KGDB " + "connected.\n"); + return -EINVAL; + } + + /* Save the old values so they can be restored */ + if (kgdb_io_handler_cnt >= MAX_KGDB_IO_HANDLERS) { + printk(KERN_ERR "kgdb: No more I/O handles available.\n"); + return -EINVAL; + } + + /* Check to see if there is an existing driver and if so save its + * values. Also check to make sure the same driver was not trying + * to re-register. + */ + if (kgdb_io_ops.read_char != NULL && + kgdb_io_ops.read_char != local_kgdb_io_ops->read_char) { + memcpy(&kgdb_io_ops_prev[kgdb_io_handler_cnt], + &kgdb_io_ops, sizeof(struct kgdb_io)); + kgdb_io_handler_cnt++; + } + + /* Initialize the io values for this module */ + memcpy(&kgdb_io_ops, local_kgdb_io_ops, sizeof(struct kgdb_io)); + + /* Make the call to register kgdb if is not initialized */ + kgdb_register_for_panic(); + + return 0; +} + +void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops) +{ + int i; + + /* Unregister KGDB if there were no other prior io hooks, else + * restore the io hooks. + */ + if (kgdb_io_handler_cnt > 0 && kgdb_io_ops_prev[0].read_char != NULL) { + /* First check if the hook that is in use is the one being + * removed */ + if (kgdb_io_ops.read_char == local_kgdb_io_ops->read_char) { + /* Set 'i' to the value of where the list should be + * shifed */ + i = kgdb_io_handler_cnt - 1; + memcpy(&kgdb_io_ops, &kgdb_io_ops_prev[i], + sizeof(struct kgdb_io)); + } else { + /* Simple case to remove an entry for an I/O handler + * that is not in use */ + for (i = 0; i < kgdb_io_handler_cnt; i++) { + if (kgdb_io_ops_prev[i].read_char == + local_kgdb_io_ops->read_char) + break; + } + } + + /* Shift all the entries in the handler array so it is + * ordered from oldest to newest. + */ + kgdb_io_handler_cnt--; + for (; i < kgdb_io_handler_cnt; i++) { + memcpy(&kgdb_io_ops_prev[i], &kgdb_io_ops_prev[i + 1], + sizeof(struct kgdb_io)); + } + /* Handle the case if we are on the last element and set it + * to NULL; */ + memset(&kgdb_io_ops_prev[kgdb_io_handler_cnt], 0, + sizeof(struct kgdb_io)); + + if (kgdb_connected) + printk(KERN_ERR "kgdb: WARNING: I/O method changed " + "while kgdb was connected state.\n"); + } else { + /* KGDB is no longer able to communicate out, so + * unregister our hooks and reset state. */ + kgdb_unregister_for_panic(); + if (kgdb_connected) { + printk(KERN_CRIT "kgdb: I/O module was unloaded while " + "a debugging session was running. " + "KGDB will be reset.\n"); + if (remove_all_break() < 0) + printk(KERN_CRIT "kgdb: Reset failed.\n"); + kgdb_connected = 0; + } + memset(&kgdb_io_ops, 0, sizeof(struct kgdb_io)); + } +} + +/* + * There are times we need to call a tasklet to cause a breakpoint + * as calling breakpoint() at that point might be fatal. We have to + * check that the exception stack is setup, as tasklets may be scheduled + * prior to this. When that happens, it is up to the architecture to + * schedule this when it is safe to run. + */ +static void kgdb_tasklet_bpt(unsigned long ing) +{ + breakpoint(); +} + +DECLARE_TASKLET(kgdb_tasklet_breakpoint, kgdb_tasklet_bpt, 0); + +/* + * This function can be called very early, either via early_param() or + * an explicit breakpoint() early on. + */ +static void __init kgdb_early_entry(void) +{ + /* Let the architecture do any setup that it needs to. */ + kgdb_arch_init(); + + /* Now try the I/O. */ + /* For early entry kgdb_io_ops.init must be defined */ + if (!kgdb_io_ops.init || kgdb_io_ops.init()) { + /* Try again later. */ + kgdb_initialized = -1; + return; + } + + /* Finish up. */ + kgdb_internal_init(); + + /* KGDB can assume that if kgdb_io_ops.init was defined that the + * panic registion should be performed at this time. This means + * kgdb_io_ops.init did not come from a kernel module and was + * initialized statically by a built in. + */ + if (kgdb_io_ops.init) + kgdb_register_for_panic(); +} + +/* + * This function will always be invoked to make sure that KGDB will grab + * what it needs to so that if something happens while the system is + * running, KGDB will get involved. If kgdb_early_entry() has already + * been invoked, there is little we need to do. + */ +static int __init kgdb_late_entry(void) +{ + int need_break = 0; + + /* If kgdb_initialized is -1 then we were passed kgdbwait. */ + if (kgdb_initialized == -1) + need_break = 1; + + /* + * If we haven't tried to initialize KGDB yet, we need to call + * kgdb_arch_init before moving onto the I/O. + */ + if (!kgdb_initialized) + kgdb_arch_init(); + + if (kgdb_initialized != 1) { + if (kgdb_io_ops.init && kgdb_io_ops.init()) { + /* When KGDB allows I/O via modules and the core + * I/O init fails KGDB must default to defering the + * I/O setup, and appropriately print an error about + * it. + */ + printk(KERN_ERR "kgdb: Could not setup core I/O " + "for KGDB.\n"); + printk(KERN_INFO "kgdb: Defering I/O setup to kernel " + "module.\n"); + memset(&kgdb_io_ops, 0, sizeof(struct kgdb_io)); + } + + kgdb_internal_init(); + + /* KGDB can assume that if kgdb_io_ops.init was defined that + * panic registion should be performed at this time. This means + * kgdb_io_ops.init did not come from a kernel module and was + * initialized statically by a built in. + */ + if (kgdb_io_ops.init) + kgdb_register_for_panic(); + } + + /* Registering to reboot notifier list*/ + register_reboot_notifier(&kgdb_reboot_notifier); + + /* Now do any late init of the I/O. */ + if (kgdb_io_ops.late_init) + kgdb_io_ops.late_init(); + + if (need_break) { + printk(KERN_CRIT "kgdb: Waiting for connection from remote" + " gdb...\n"); + breakpoint(); + } + + return 0; +} + +late_initcall(kgdb_late_entry); + +/* + * This function will generate a breakpoint exception. It is used at the + * beginning of a program to sync up with a debugger and can be used + * otherwise as a quick means to stop program execution and "break" into + * the debugger. + */ +void breakpoint(void) +{ + if (kgdb_initialized != 1) { + kgdb_early_entry(); + if (kgdb_initialized == 1) + printk(KERN_CRIT "Waiting for connection from remote " + "gdb...\n"); + else { + printk(KERN_CRIT "KGDB cannot initialize I/O yet.\n"); + return; + } + } + + atomic_set(&kgdb_setting_breakpoint, 1); + wmb(); + BREAKPOINT(); + wmb(); + atomic_set(&kgdb_setting_breakpoint, 0); +} + +EXPORT_SYMBOL(breakpoint); + +#ifdef CONFIG_MAGIC_SYSRQ +static void sysrq_handle_gdb(int key, struct pt_regs *pt_regs, + struct tty_struct *tty) +{ + printk("Entering GDB stub\n"); + breakpoint(); +} +static struct sysrq_key_op sysrq_gdb_op = { + .handler = sysrq_handle_gdb, + .help_msg = "Gdb", + .action_msg = "GDB", +}; + +static int gdb_register_sysrq(void) +{ + printk("Registering GDB sysrq handler\n"); + register_sysrq_key('g', &sysrq_gdb_op); + return 0; +} + +module_init(gdb_register_sysrq); +#endif + +static int kgdb_notify_reboot(struct notifier_block *this, + unsigned long code, void *x) +{ + + unsigned long flags; + + /* If we're debugging, or KGDB has not connected, don't try + * and print. */ + if (!kgdb_connected || atomic_read(&debugger_active) != 0) + return 0; + if ((code == SYS_RESTART) || (code == SYS_HALT) || (code == SYS_POWER_OFF)){ + local_irq_save(flags); + put_packet("X00"); + local_irq_restore(flags); + } + return NOTIFY_DONE; +} + +#ifdef CONFIG_KGDB_CONSOLE +void kgdb_console_write(struct console *co, const char *s, unsigned count) +{ + unsigned long flags; + + /* If we're debugging, or KGDB has not connected, don't try + * and print. */ + if (!kgdb_connected || atomic_read(&debugger_active) != 0) + return; + + local_irq_save(flags); + kgdb_msg_write(s, count); + local_irq_restore(flags); +} + +struct console kgdbcons = { + .name = "kgdb", + .write = kgdb_console_write, + .flags = CON_PRINTBUFFER | CON_ENABLED, +}; +static int __init kgdb_console_init(void) +{ + register_console(&kgdbcons); + return 0; +} + +console_initcall(kgdb_console_init); +#endif + +static int __init opt_kgdb_enter(char *str) +{ + /* We've already done this by an explicit breakpoint() call. */ + if (kgdb_initialized) + return 0; + + /* Call breakpoint() which will take care of init. */ + breakpoint(); + + return 0; +} + +early_param("kgdbwait", opt_kgdb_enter); Index: linux-2.6.18-rc7/kernel/Makefile =================================================================== --- linux-2.6.18-rc7.orig/kernel/Makefile 2006-10-13 16:56:52.000000000 +0100 +++ linux-2.6.18-rc7/kernel/Makefile 2006-10-13 17:03:56.000000000 +0100 @@ -42,6 +42,7 @@ obj-$(CONFIG_STOP_MACHINE) += stop_machi obj-$(CONFIG_AUDIT) += audit.o auditfilter.o obj-$(CONFIG_AUDITSYSCALL) += auditsc.o obj-$(CONFIG_KPROBES) += kprobes.o +obj-$(CONFIG_KGDB) += kgdb.o kgdbarchlib.o obj-$(CONFIG_SYSFS) += ksysfs.o obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o obj-$(CONFIG_GENERIC_HARDIRQS) += irq/ Index: linux-2.6.18-rc7/kernel/sched.c =================================================================== --- linux-2.6.18-rc7.orig/kernel/sched.c 2006-10-13 16:56:52.000000000 +0100 +++ linux-2.6.18-rc7/kernel/sched.c 2006-10-13 17:04:55.000000000 +0100 @@ -52,6 +52,7 @@ #include #include #include +#include #include #include @@ -6790,6 +6791,9 @@ void __might_sleep(char *file, int line) #ifdef in_atomic static unsigned long prev_jiffy; /* ratelimiting */ + if (atomic_read(&debugger_active)) + return; + if ((in_atomic() || irqs_disabled()) && system_state == SYSTEM_RUNNING && !oops_in_progress) { if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy) Index: linux-2.6.18-rc7/include/linux/kgdb.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.18-rc7/include/linux/kgdb.h 2006-10-13 17:03:56.000000000 +0100 @@ -0,0 +1,274 @@ +/* + * include/linux/kgdb.h + * + * This provides the hooks and functions that KGDB needs to share between + * the core, I/O and arch-specific portions. + * + * Author: Amit Kale and + * Tom Rini + * + * 2001-2004 (c) Amit S. Kale and 2003-2005 (c) MontaVista Software, Inc. + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifdef __KERNEL__ +#ifndef _KGDB_H_ +#define _KGDB_H_ + +#include + +#ifdef CONFIG_KGDB +#include +#include +#include +#include + +struct tasklet_struct; +struct pt_regs; +struct task_struct; +struct uart_port; + +#ifdef CONFIG_KGDB_CONSOLE +extern struct console kgdbcons; +#endif + +/* To enter the debugger explicitly. */ +extern void breakpoint(void); +extern int kgdb_connected; +extern int kgdb_may_fault; +extern struct tasklet_struct kgdb_tasklet_breakpoint; + +extern atomic_t kgdb_setting_breakpoint; +extern atomic_t cpu_doing_single_step; + +extern struct task_struct *kgdb_usethread, *kgdb_contthread; + +enum kgdb_bptype { + bp_breakpoint = '0', + bp_hardware_breakpoint, + bp_write_watchpoint, + bp_read_watchpoint, + bp_access_watchpoint +}; + +enum kgdb_bpstate { + bp_none = 0, + bp_removed, + bp_set, + bp_active +}; + +struct kgdb_bkpt { + unsigned long bpt_addr; + unsigned char saved_instr[BREAK_INSTR_SIZE]; + enum kgdb_bptype type; + enum kgdb_bpstate state; +}; + +/* The maximum number of KGDB I/O modules that can be loaded */ +#define MAX_KGDB_IO_HANDLERS 3 + +#ifndef MAX_BREAKPOINTS +#define MAX_BREAKPOINTS 1000 +#endif + +#define KGDB_HW_BREAKPOINT 1 + +/* Required functions. */ +/** + * regs_to_gdb_regs - Convert ptrace regs to GDB regs + * @gdb_regs: A pointer to hold the registers in the order GDB wants. + * @regs: The &struct pt_regs of the current process. + * + * Convert the pt_regs in @regs into the format for registers that + * GDB expects, stored in @gdb_regs. + */ +extern void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs); + +/** + * sleeping_regs_to_gdb_regs - Convert ptrace regs to GDB regs + * @gdb_regs: A pointer to hold the registers in the order GDB wants. + * @p: The &struct task_struct of the desired process. + * + * Convert the register values of the sleeping process in @p to + * the format that GDB expects. + * This function is called when kgdb does not have access to the + * &struct pt_regs and therefore it should fill the gdb registers + * @gdb_regs with what has been saved in &struct thread_struct + * thread field during switch_to. + */ +extern void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, + struct task_struct *p); + +/** + * gdb_regs_to_regs - Convert GDB regs to ptrace regs. + * @gdb_regs: A pointer to hold the registers we've recieved from GDB. + * @regs: A pointer to a &struct pt_regs to hold these values in. + * + * Convert the GDB regs in @gdb_regs into the pt_regs, and store them + * in @regs. + */ +extern void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs); + +/** + * kgdb_arch_handle_exception - Handle architecture specific GDB packets. + * @vector: The error vector of the exception that happened. + * @signo: The signal number of the exception that happened. + * @err_code: The error code of the exception that happened. + * @remcom_in_buffer: The buffer of the packet we have read. + * @remcom_out_buffer: The buffer, of %BUFMAX to write a packet into. + * @regs: The &struct pt_regs of the current process. + * + * This function MUST handle the 'c' and 's' command packets, + * as well packets to set / remove a hardware breakpoint, if used. + * If there are additional packets which the hardware needs to handle, + * they are handled here. The code should return -1 if it wants to + * process more packets, and a %0 or %1 if it wants to exit from the + * kgdb hook. + */ +extern int kgdb_arch_handle_exception(int vector, int signo, int err_code, + char *remcom_in_buffer, + char *remcom_out_buffer, + struct pt_regs *regs); + +#ifndef JMP_REGS_ALIGNMENT +#define JMP_REGS_ALIGNMENT +#endif + +extern unsigned long kgdb_fault_jmp_regs[]; + +/** + * kgdb_fault_setjmp - Store state in case we fault. + * @curr_context: An array to store state into. + * + * Certain functions may try and access memory, and in doing so may + * cause a fault. When this happens, we trap it, restore state to + * this call, and let ourself know that something bad has happened. + */ +extern asmlinkage int kgdb_fault_setjmp(unsigned long *curr_context); + +/** + * kgdb_fault_longjmp - Restore state when we have faulted. + * @curr_context: The previously stored state. + * + * When something bad does happen, this function is called to + * restore the known good state, and set the return value to 1, so + * we know something bad happened. + */ +extern asmlinkage void kgdb_fault_longjmp(unsigned long *curr_context); + +/* Optional functions. */ +extern int kgdb_arch_init(void); +extern void kgdb_disable_hw_debug(struct pt_regs *regs); +extern void kgdb_post_master_code(struct pt_regs *regs, int e_vector, + int err_code); +extern void kgdb_roundup_cpus(unsigned long flags); +extern int kgdb_set_hw_break(unsigned long addr); +extern int kgdb_remove_hw_break(unsigned long addr); +extern void kgdb_remove_all_hw_break(void); +extern void kgdb_correct_hw_break(void); +extern void kgdb_shadowinfo(struct pt_regs *regs, char *buffer, + unsigned threadid); +extern struct task_struct *kgdb_get_shadow_thread(struct pt_regs *regs, + int threadid); +extern struct pt_regs *kgdb_shadow_regs(struct pt_regs *regs, int threadid); +extern int kgdb_validate_break_address(unsigned long addr); +extern int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr); +extern int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle); + +/** + * struct kgdb_arch - Desribe architecture specific values. + * @gdb_bpt_instr: The instruction to trigger a breakpoint. + * @flags: Flags for the breakpoint, currently just %KGDB_HW_BREAKPOINT. + * @shadowth: A value of %1 indicates we shadow information on processes. + * @set_breakpoint: Allow an architecture to specify how to set a software + * breakpoint. + * @remove_breakpoint: Allow an architecture to specify how to remove a + * software breakpoint. + * @set_hw_breakpoint: Allow an architecture to specify how to set a hardware + * breakpoint. + * @remove_hw_breakpoint: Allow an architecture to specify how to remove a + * hardware breakpoint. + * + * The @shadowth flag is an option to shadow information not retrievable by + * gdb otherwise. This is deprecated in favor of a binutils which supports + * CFI macros. + */ +struct kgdb_arch { + unsigned char gdb_bpt_instr[BREAK_INSTR_SIZE]; + unsigned long flags; + unsigned shadowth; + int (*set_breakpoint) (unsigned long, char *); + int (*remove_breakpoint)(unsigned long, char *); + int (*set_hw_breakpoint)(unsigned long, int, enum kgdb_bptype); + int (*remove_hw_breakpoint)(unsigned long, int, enum kgdb_bptype); +}; + +/* Thread reference */ +typedef unsigned char threadref[8]; + +/** + * struct kgdb_io - Desribe the interface for an I/O driver to talk with KGDB. + * @read_char: Pointer to a function that will return one char. + * @write_char: Pointer to a function that will write one char. + * @flush: Pointer to a function that will flush any pending writes. + * @init: Pointer to a function that will initialize the device. + * @late_init: Pointer to a function that will do any setup that has + * other dependencies. + * @pre_exception: Pointer to a function that will do any prep work for + * the I/O driver. + * @post_exception: Pointer to a function that will do any cleanup work + * for the I/O driver. + * + * The @init and @late_init function pointers allow for an I/O driver + * such as a serial driver to fully initialize the port with @init and + * be called very early, yet safely call request_irq() later in the boot + * sequence. + * + * @init is allowed to return a non-0 return value to indicate failure. + * If this is called early on, then KGDB will try again when it would call + * @late_init. If it has failed later in boot as well, the user will be + * notified. + */ +struct kgdb_io { + int (*read_char) (void); + void (*write_char) (u8); + void (*flush) (void); + int (*init) (void); + void (*late_init) (void); + void (*pre_exception) (void); + void (*post_exception) (void); +}; + +extern struct kgdb_io kgdb_io_ops; +extern struct kgdb_arch arch_kgdb_ops; +extern int kgdb_initialized; + +extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops); +extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops); + +extern void __init kgdb8250_add_port(int i, struct uart_port *serial_req); +extern void __init kgdb8250_add_platform_port(int i, struct plat_serial8250_port *serial_req); + +extern int kgdb_hex2long(char **ptr, long *long_val); +extern char *kgdb_mem2hex(char *mem, char *buf, int count); +extern char *kgdb_hex2mem(char *buf, char *mem, int count); +extern int kgdb_get_mem(char *addr, unsigned char *buf, int count); +extern int kgdb_set_mem(char *addr, unsigned char *buf, int count); + +int kgdb_isremovedbreak(unsigned long addr); +int kgdb_skipexception(int exception, struct pt_regs *regs); + +extern int kgdb_handle_exception(int ex_vector, int signo, int err_code, + struct pt_regs *regs); +extern void kgdb_nmihook(int cpu, void *regs); +extern int debugger_step; +extern atomic_t debugger_active; +extern struct kgdb_arch *kgdb_ops; +#else +/* Stubs for when KGDB is not set. */ +static const atomic_t debugger_active = ATOMIC_INIT(0); +#endif /* CONFIG_KGDB */ +#endif /* _KGDB_H_ */ +#endif /* __KERNEL__ */ Index: linux-2.6.18-rc7/MAINTAINERS =================================================================== --- linux-2.6.18-rc7.orig/MAINTAINERS 2006-10-13 16:57:37.000000000 +0100 +++ linux-2.6.18-rc7/MAINTAINERS 2006-10-13 17:03:56.000000000 +0100 @@ -1685,6 +1685,15 @@ L: linux-kernel@vger.kernel.org L: fastboot@osdl.org S: Maintained +KGDB +P: Tom Rini +P: Amit S. Kale +M: trini@kernel.crashing.org +M: amitkale@linsyssoft.com +W: http://sourceforge.net/projects/kgdb +L: kgdb-bugreport@lists.sourceforge.net +S: Maintained + KPROBES P: Prasanna S Panchamukhi M: prasanna@in.ibm.com Index: linux-2.6.18-rc7/kernel/kgdbarchlib.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.18-rc7/kernel/kgdbarchlib.c 2006-10-13 17:03:56.000000000 +0100 @@ -0,0 +1,198 @@ +#include + +struct kgdb_arch *kgdb_ops = &arch_kgdb_ops; + +/** + * kgdb_arch_init - Perform any architecture specific initalization. + * + * RETURN: + * The return value is ignored. + * + * This function will handle the initalization of any architecture + * specific hooks. + */ +int __attribute__ ((weak)) + kgdb_arch_init(void) +{ + return 0; +} + +/** + * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb. + * @regs: Current &struct pt_regs. + * + * This function will be called if the particular architecture must + * disable hardware debugging while it is processing gdb packets or + * handling exception. + */ +void __attribute__ ((weak)) + kgdb_disable_hw_debug(struct pt_regs *regs) +{ +} + +/* + * Skip an int3 exception when it occurs after a breakpoint has been + * removed. Backtrack eip by 1 since the int3 would have caused it to + * increment by 1. + */ +int __attribute__ ((weak)) + kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return 0; +} + +/** + * kgdb_set_hw_break - Set a hardware breakpoint at @addr. + * @addr: The address to set a hardware breakpoint at. + */ +int __attribute__ ((weak)) + kgdb_set_hw_break(unsigned long addr) +{ + return 0; +} + +/** + * kgdb_remove_hw_break - Remove a hardware breakpoint at @addr. + * @addr: The address to remove a hardware breakpoint from. + */ +int __attribute__ ((weak)) + kgdb_remove_hw_break(unsigned long addr) +{ + return 0; +} + +/** + * kgdb_remove_all_hw_break - Clear all hardware breakpoints. + */ +void __attribute__ ((weak)) + kgdb_remove_all_hw_break(void) +{ +} + +/** + * kgdb_correct_hw_break - Correct hardware breakpoints. + * + * A hook to allow for changes to the hardware breakpoint, called + * after a single step (s) or continue (c) packet, and once we're about + * to let the kernel continue running. + * + * This is used to set the hardware breakpoint registers for all the + * slave cpus on an SMP configuration. This must be called after any + * changes are made to the hardware breakpoints (such as by a single + * step (s) or continue (c) packet. This is only required on + * architectures that support SMP and every processor has its own set + * of breakpoint registers. + */ +void __attribute__ ((weak)) + kgdb_correct_hw_break(void) +{ +} + +/** + * kgdb_post_master_code - Save error vector/code numbers. + * @regs: Original pt_regs. + * @e_vector: Original error vector. + * @err_code: Original error code. + * + * This is needed on architectures which support SMP and KGDB. + * This function is called after all the slave cpus have been put + * to a know spin state and the master CPU has control over KGDB. + */ + +void __attribute__ ((weak)) + kgdb_post_master_code(struct pt_regs *regs, int e_vector, int err_code) +{ +} + +/** + * kgdb_roundup_cpus - Get other CPUs into a holding pattern + * @flags: Current IRQ state + * + * On SMP systems, we need to get the attention of the other CPUs + * and get them be in a known state. This should do what is needed + * to get the other CPUs to call kgdb_wait(). Note that on some arches, + * the NMI approach is not used for rounding up all the CPUs. For example, + * in case of MIPS, smp_call_function() is used to roundup CPUs. In + * this case, we have to make sure that interrupts are enabled before + * calling smp_call_function(). The argument to this function is + * the flags that will be used when restoring the interrupts. There is + * local_irq_save() call before kgdb_roundup_cpus(). + */ +void __attribute__ ((weak)) + kgdb_roundup_cpus(unsigned long flags) +{ +} + +/** + * kgdb_shadowinfo - Get shadowed information on @threadid. + * @regs: The &struct pt_regs of the current process. + * @buffer: A buffer of %BUFMAX size. + * @threadid: The thread id of the shadowed process to get information on. + */ +void __attribute__ ((weak)) + kgdb_shadowinfo(struct pt_regs *regs, char *buffer, unsigned threadid) +{ +} + +/** + * kgdb_get_shadow_thread - Get the shadowed &task_struct of @threadid. + * @regs: The &struct pt_regs of the current thread. + * @threadid: The thread id of the shadowed process to get information on. + * + * RETURN: + * This returns a pointer to the &struct task_struct of the shadowed + * thread, @threadid. + */ +struct task_struct __attribute__ ((weak)) + * kgdb_get_shadow_thread(struct pt_regs *regs, int threadid) +{ + return NULL; +} + +/** + * kgdb_shadow_regs - Return the shadowed registers of @threadid. + * @regs: The &struct pt_regs of the current thread. + * @threadid: The thread id we want the &struct pt_regs for. + * + * RETURN: + * The a pointer to the &struct pt_regs of the shadowed thread @threadid. + */ +struct pt_regs __attribute__ ((weak)) + * kgdb_shadow_regs(struct pt_regs *regs, int threadid) +{ + return NULL; +} + +int __attribute__ ((weak)) + kgdb_validate_break_address(unsigned long addr) +{ + int error = 0; + char tmp_variable[BREAK_INSTR_SIZE]; + error = kgdb_get_mem((char *)addr, tmp_variable, BREAK_INSTR_SIZE); + return error; +} + +int __attribute__ ((weak)) + kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) +{ + int error = 0; + if ((error = kgdb_get_mem((char *)addr, + saved_instr, BREAK_INSTR_SIZE)) < 0) + return error; + + if ((error = kgdb_set_mem((char *)addr, kgdb_ops->gdb_bpt_instr, + BREAK_INSTR_SIZE)) < 0) + return error; + return 0; +} + +int __attribute__ ((weak)) + kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) +{ + + int error = 0; + if ((error =kgdb_set_mem((char *)addr, (char *)bundle, + BREAK_INSTR_SIZE)) < 0) + return error; + return 0; +}